| /** | |
| * \file | |
| * | |
| * \brief ASF Patch Header file definitions for SAM4L. | |
| * | |
| * Copyright (c) 2012 Atmel Corporation. All rights reserved. | |
| * | |
| * \asf_license_start | |
| * | |
| * \page License | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * | |
| * 1. Redistributions of source code must retain the above copyright notice, | |
| * this list of conditions and the following disclaimer. | |
| * | |
| * 2. Redistributions in binary form must reproduce the above copyright notice, | |
| * this list of conditions and the following disclaimer in the documentation | |
| * and/or other materials provided with the distribution. | |
| * | |
| * 3. The name of Atmel may not be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * 4. This software may only be redistributed and used in connection with an | |
| * Atmel microcontroller product. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED | |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE | |
| * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR | |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN | |
| * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * \asf_license_stop | |
| * | |
| */ | |
| #ifndef SAM4L_PATCH_ASF_H_INCLUDED | |
| #define SAM4L_PATCH_ASF_H_INCLUDED | |
| // These defines are used for sam/drivers/flashcalw implementation. | |
| #define FLASHCALW_FCMD_CMD_HSEN (0x10u << 0) | |
| #define FLASHCALW_FCMD_CMD_HSDIS (0x11u << 0) | |
| // These defines are used to keep compatibility with existing | |
| // sam/drivers/usart implementation from SAM3/4 products with SAM4L product. | |
| #define US_MR_USART_MODE_HW_HANDSHAKING US_MR_USART_MODE_HARDWARE | |
| #define US_MR_USART_MODE_IS07816_T_0 US_MR_USART_MODE_ISO7816_T0 | |
| #define US_MR_USART_MODE_IS07816_T_1 US_MR_USART_MODE_ISO7816_T1 | |
| #define US_MR_NBSTOP_2_BIT US_MR_NBSTOP_2 | |
| #define US_MR_NBSTOP_1_5_BIT US_MR_NBSTOP_1_5 | |
| #define US_MR_NBSTOP_1_BIT US_MR_NBSTOP_1 | |
| #define US_MR_CHRL_8_BIT US_MR_CHRL_8 | |
| #define US_MR_PAR_NO US_MR_PAR_NONE | |
| #define US_MR_PAR_MULTIDROP US_MR_PAR_MULTI | |
| #define US_IF US_IFR | |
| #define US_WPSR_WPVS US_WPSR_WPV_1 | |
| #if (!defined SCIF_RCOSC_FREQUENCY) | |
| # define SCIF_RCOSC_FREQUENCY 115200 | |
| #endif | |
| // These defines for homogeneity with other SAM header files. | |
| #define CHIP_FREQ_FWS_0 (18000000UL) /**< \brief Maximum operating frequency when FWS is 0 */ | |
| #define CHIP_FREQ_FWS_1 (36000000UL) /**< \brief Maximum operating frequency when FWS is 1 */ | |
| // WARNING NOTE: these are preliminary values. | |
| #define CHIP_FREQ_FLASH_HSEN_FWS_0 (18000000UL) /**< \brief Maximum operating frequency when FWS is 0 and the FLASH HS mode is enabled */ | |
| #define CHIP_FREQ_FLASH_HSEN_FWS_1 (36000000UL) /**< \brief Maximum operating frequency when FWS is 1 and the FLASH HS mode is enabled */ | |
| // Size of HRAMC1 with 32-bit access | |
| #undef HRAMC1_SIZE | |
| #define HRAMC1_SIZE (0x800UL) | |
| // USBC related offsets | |
| #define USBC_UHINT_P0INT_Pos 8 | |
| #define USBC_UHINTE_P0INTE_Pos 8 | |
| #define USBC_UPCFG0_PBK_Pos 2 | |
| #define USBC_UPCFG0_PBK_Msk (0x1u << USBC_UPCFG0_PBK_Pos) | |
| // These defines are used to keep compatibility with existing | |
| // sam/drivers/tc implementation from SAM3/4 products with SAM4L product. | |
| #define TC_SMMR TC_SMC | |
| #define TC_CMR_LDRA_RISING TC_CMR_LDRA_POS_EDGE_TIOA | |
| #define TC_CMR_LDRB_FALLING TC_CMR_LDRB_NEG_EDGE_TIOA | |
| #define TC_CMR_ETRGEDG_FALLING TC_CMR_ETRGEDG_NEG_EDGE | |
| // These defines are used to keep compatibility with existing | |
| // sam/drivers/spi implementation from SAM3/4 products with SAM4L product. | |
| #define SPI_CSR_BITS_8_BIT SPI_CSR_BITS_8_BPT | |
| #define SPI_WPSR_WPVS_Pos SPI_WPSR_SPIWPVS_Pos | |
| #define SPI_WPSR_WPVS_Msk SPI_WPSR_SPIWPVS_Msk | |
| #define SPI_WPSR_WPVSRC_Pos SPI_WPSR_SPIWPVSRC_Pos | |
| #define SPI_WPSR_WPVSRC_Msk SPI_WPSR_SPIWPVSRC_Msk | |
| // These defines are used to keep compatibility with existing | |
| // sam/drivers/crccu implementation from SAM3/4 products with SAM4L product. | |
| #define CRCCU_DMA_EN CRCCU_DMAEN | |
| #define CRCCU_DMA_DIS CRCCU_DMADIS | |
| #define CRCCU_DMA_SR CRCCU_DMASR | |
| #define CRCCU_DMA_IER CRCCU_DMAIER | |
| #define CRCCU_DMA_IDR CRCCU_DMAIDR | |
| #define CRCCU_DMA_IMR CRCCU_DMAIMR | |
| #define CRCCU_DMA_ISR CRCCU_DMAISR | |
| #define CRCCU_DMA_EN_DMAEN CRCCU_DMAEN_DMAEN | |
| #define CRCCU_DMA_DIS_DMADIS CRCCU_DMADIS_DMADIS | |
| #define CRCCU_DMA_SR_DMASR CRCCU_DMASR_DMASR | |
| #define CRCCU_DMA_IER_DMAIER CRCCU_DMAIER_DMAIER | |
| #define CRCCU_DMA_IDR_DMAIDR CRCCU_DMAIDR_DMAIDR | |
| #define CRCCU_DMA_IMR_DMAIMR CRCCU_DMAIMR_DMAIMR | |
| #define CRCCU_DMA_ISR_DMAISR CRCCU_DMAISR_DMAISR | |
| #define CRCCU_MR_PTYPE_CCITT8023 CRCCU_MR_PTYPE(0) | |
| #define CRCCU_MR_PTYPE_CASTAGNOLI CRCCU_MR_PTYPE(1) | |
| #define CRCCU_MR_PTYPE_CCITT16 CRCCU_MR_PTYPE(2) | |
| #endif // SAM4L_PATCH_ASF_H_INCLUDED |