blob: 4a77bc777f8b5a495b688896a3bd058a571fcb18 [file] [log] [blame]
/**
* \file
*
* \brief Standard board header file.
*
* This file includes the appropriate board header file according to the
* defined board (parameter BOARD).
*
* Copyright (c) 2009-2012 Atmel Corporation. All rights reserved.
*
* \asf_license_start
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* 3. The name of Atmel may not be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* 4. This software may only be redistributed and used in connection with an Atmel
* microcontroller product.
*
* THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
* EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* \asf_license_stop
*
*/
#ifndef _BOARD_H_
#define _BOARD_H_
/**
* \defgroup group_common_boards Generic board support
*
* The generic board support module includes board-specific definitions
* and function prototypes, such as the board initialization function.
*
* \{
*/
#include "compiler.h"
#ifdef __cplusplus
extern "C" {
#endif
/*! \name Base Boards
*/
//! @{
#define EVK1100 1 //!< AT32UC3A EVK1100 board.
#define EVK1101 2 //!< AT32UC3B EVK1101 board.
#define UC3C_EK 3 //!< AT32UC3C UC3C_EK board.
#define EVK1104 4 //!< AT32UC3A3 EVK1104 board.
#define EVK1105 5 //!< AT32UC3A EVK1105 board.
#define STK600_RCUC3L0 6 //!< STK600 RCUC3L0 board.
#define UC3L_EK 7 //!< AT32UC3L-EK board.
#define XPLAIN 8 //!< ATxmega128A1 Xplain board.
#define STK600_RC064X 10 //!< ATxmega256A3 STK600 board.
#define STK600_RC100X 11 //!< ATxmega128A1 STK600 board.
#define UC3_A3_XPLAINED 13 //!< ATUC3A3 UC3-A3 Xplained board.
#define UC3_C2_XPLAINED 14 //!< ATUC3A3 UC3-C2 Xplained board.
#define UC3_L0_XPLAINED 15 //!< ATUC3L0 UC3-L0 Xplained board.
#define STK600_RCUC3D 16 //!< STK600 RCUC3D board.
#define STK600_RCUC3C0 17 //!< STK600 RCUC3C board.
#define XMEGA_B1_XPLAINED 18 //!< ATxmega128B1 Xplained board.
#define XMEGA_A1_XPLAINED 19 //!< ATxmega128A1 Xplain-A1 board.
#define STK600_RCUC3L4 21 //!< ATUCL4 STK600 board
#define UC3_L0_XPLAINED_BC 22 //!< ATUC3L0 UC3-L0 Xplained board controller board
#define MEGA1284P_XPLAINED_BC 23 //!< ATmega1284P-Xplained board controller board
#define STK600_RC044X 24 //!< STK600 with RC044X routing card board.
#define STK600_RCUC3B 25 //!< STK600 RCUC3B board.
#define UC3_L0_QT600 26 //!< QT600 UC3L0 MCU board.
#define XMEGA_A3BU_XPLAINED 27 //!< ATxmega256A3BU Xplained board.
#define STK600_RC064X_LCDX 28 //!< XMEGAB3 STK600 RC064X LCDX board.
#define STK600_RC100X_LCDX 29 //!< XMEGAB1 STK600 RC100X LCDX board.
#define UC3B_BOARD_CONTROLLER 30 //!< AT32UC3B1 board controller for Atmel boards
#define RZ600 31 //!< AT32UC3A RZ600 MCU board
#define SAM3S_EK 32 //!< SAM3S-EK board.
#define SAM3U_EK 33 //!< SAM3U-EK board.
#define SAM3X_EK 34 //!< SAM3X-EK board.
#define SAM3N_EK 35 //!< SAM3N-EK board.
#define SAM3S_EK2 36 //!< SAM3S-EK2 board.
#define SAM4S_EK 37 //!< SAM4S-EK board.
#define STK600_RCUC3A0 38 //!< STK600 RCUC3A0 board.
#define SAM4S_XPLAINED 39 //!< SAM4S Xplained board.
#define ATXMEGA128A1_QT600 40 //!< QT600 ATXMEGA128A1 MCU board.
#define SIMULATOR_XMEGA_A1 97 //!< Simulator for XMEGA A1 devices
#define AVR_SIMULATOR_UC3 98 //!< AVR SIMULATOR for AVR UC3 device family.
#define USER_BOARD 99 //!< User-reserved board (if any).
#define DUMMY_BOARD 100 //!< Dummy board to support board-independent applications (e.g. bootloader)
//! @}
/*! \name Extension Boards
*/
//! @{
#define EXT1102 1 //!< AT32UC3B EXT1102 board
#define MC300 2 //!< AT32UC3 MC300 board
#define SENSORS_XPLAINED_INERTIAL_1 3 //!< Xplained inertial sensor board 1
#define SENSORS_XPLAINED_INERTIAL_2 4 //!< Xplained inertial sensor board 2
#define SENSORS_XPLAINED_PRESSURE_1 5 //!< Xplained pressure sensor board
#define SENSORS_XPLAINED_LIGHTPROX_1 6 //!< Xplained light & proximity sensor board
#define SENSORS_XPLAINED_INERTIAL_A1 7 //!< Xplained inertial sensor board "A"
#define RZ600_AT86RF231 8 //!< AT86RF231 RF board in RZ600
#define RZ600_AT86RF230B 9 //!< AT86RF231 RF board in RZ600
#define RZ600_AT86RF212 10 //!< AT86RF231 RF board in RZ600
#define SENSORS_XPLAINED_BREADBOARD 11 //!< Xplained sensor development breadboard
#define USER_EXT_BOARD 99 //!< User-reserved extension board (if any).
//! @}
#if BOARD == EVK1100
#include "evk1100/evk1100.h"
#elif BOARD == EVK1101
#include "evk1101/evk1101.h"
#elif BOARD == UC3C_EK
#include "uc3c_ek/uc3c_ek.h"
#elif BOARD == EVK1104
#include "evk1104/evk1104.h"
#elif BOARD == EVK1105
#include "evk1105/evk1105.h"
#elif BOARD == STK600_RCUC3L0
#include "stk600/rcuc3l0/stk600_rcuc3l0.h"
#elif BOARD == UC3L_EK
#include "uc3l_ek/uc3l_ek.h"
#elif BOARD == STK600_RCUC3L4
#include "stk600/rcuc3l4/stk600_rcuc3l4.h"
#elif BOARD == XPLAIN
#include "xplain/xplain.h"
#elif BOARD == STK600_RC044X
#include "stk600/rc044x/stk600_rc044x.h"
#elif BOARD == STK600_RC064X
#include "stk600/rc064x/stk600_rc064x.h"
#elif BOARD == STK600_RC100X
#include "stk600/rc100x/stk600_rc100x.h"
#elif BOARD == UC3_A3_XPLAINED
#include "uc3_a3_xplained/uc3_a3_xplained.h"
#elif BOARD == UC3_C2_XPLAINED
#include "uc3_c2_xplained/uc3_c2_xplained.h"
#elif BOARD == UC3_L0_XPLAINED
#include "uc3_l0_xplained/uc3_l0_xplained.h"
#elif BOARD == STK600_RCUC3B
#include "stk600/rcuc3b/stk600_rcuc3b.h"
#elif BOARD == STK600_RCUC3D
#include "stk600/rcuc3d/stk600_rcuc3d.h"
#elif BOARD == STK600_RCUC3C0
#include "stk600/rcuc3c0/stk600_rcuc3c0.h"
#elif BOARD == XMEGA_B1_XPLAINED
#include "xmega_b1_xplained/xmega_b1_xplained.h"
#elif BOARD == STK600_RC064X_LCDX
#include "stk600/rc064x_lcdx/stk600_rc064x_lcdx.h"
#elif BOARD == STK600_RC100X_LCDX
#include "stk600/rc100x_lcdx/stk600_rc100x_lcdx.h"
#elif BOARD == XMEGA_A1_XPLAINED
#include "xmega_a1_xplained/xmega_a1_xplained.h"
#elif BOARD == UC3_L0_XPLAINED_BC
#include "uc3_l0_xplained_bc/uc3_l0_xplained_bc.h"
#elif BOARD == SAM3S_EK
#include "sam3s_ek/sam3s_ek.h"
#include "system_sam3s.h"
#elif BOARD == SAM3S_EK2
#include "sam3s_ek2/sam3s_ek2.h"
#include "system_sam3sd8.h"
#elif BOARD == SAM3U_EK
#include "sam3u_ek/sam3u_ek.h"
#include "system_sam3u.h"
#elif BOARD == SAM3X_EK
#include "sam3x_ek/sam3x_ek.h"
#include "system_sam3x.h"
#elif BOARD == SAM3N_EK
#include "sam3n_ek/sam3n_ek.h"
#include "system_sam3n.h"
#elif BOARD == SAM4S_EK
#include "sam4s_ek/sam4s_ek.h"
#include "system_sam4s.h"
#elif BOARD == SAM4S_XPLAINED
#include "sam4s_xplained/sam4s_xplained.h"
#include "system_sam4s.h"
#elif BOARD == MEGA1284P_XPLAINED_BC
#include "mega1284p_xplained_bc/mega1284p_xplained_bc.h"
#elif BOARD == UC3_L0_QT600
#include "uc3_l0_qt600/uc3_l0_qt600.h"
#elif BOARD == XMEGA_A3BU_XPLAINED
#include "xmega_a3bu_xplained/xmega_a3bu_xplained.h"
#elif BOARD == UC3B_BOARD_CONTROLLER
#include "uc3b_board_controller/uc3b_board_controller.h"
#elif BOARD == RZ600
#include "rz600/rz600.h"
#elif BOARD == STK600_RCUC3A0
#include "stk600/rcuc3a0/stk600_rcuc3a0.h"
#elif BOARD == ATXMEGA128A1_QT600
#include "atxmega128a1_qt600/atxmega128a1_qt600.h"
#elif BOARD == SIMULATOR_XMEGA_A1
#include "simulator/xmega_a1/simulator_xmega_a1.h"
#elif BOARD == AVR_SIMULATOR_UC3
#include "avr_simulator_uc3/avr_simulator_uc3.h"
#elif BOARD == USER_BOARD
// User-reserved area: #include the header file of your board here (if any).
#include "user_board.h"
#elif BOARD == DUMMY_BOARD
#include "dummy/dummy_board.h"
#else
#error No known AVR board defined
#endif
#if (defined EXT_BOARD)
#if EXT_BOARD == MC300
#include "mc300/mc300.h"
#elif (EXT_BOARD == SENSORS_XPLAINED_INERTIAL_1) || \
(EXT_BOARD == SENSORS_XPLAINED_INERTIAL_2) || \
(EXT_BOARD == SENSORS_XPLAINED_INERTIAL_A1) || \
(EXT_BOARD == SENSORS_XPLAINED_PRESSURE_1) || \
(EXT_BOARD == SENSORS_XPLAINED_LIGHTPROX_1) || \
(EXT_BOARD == SENSORS_XPLAINED_BREADBOARD)
#include "sensors_xplained/sensors_xplained.h"
#elif EXT_BOARD == RZ600_AT86RF231
#include "at86rf231/at86rf231.h"
#elif EXT_BOARD == RZ600_AT86RF230B
#include "at86rf230b/at86rf230b.h"
#elif EXT_BOARD == RZ600_AT86RF212
#include "at86rf212/at86rf212.h"
#elif EXT_BOARD == USER_EXT_BOARD
// User-reserved area: #include the header file of your extension board here
// (if any).
#endif
#endif
#if (defined(__GNUC__) && defined(__AVR32__)) || (defined(__ICCAVR32__) || defined(__AAVR32__))
#ifdef __AVR32_ABI_COMPILER__ // Automatically defined when compiling for AVR32, not when assembling.
/*! \brief This function initializes the board target resources
*
* This function should be called to ensure proper initialization of the target
* board hardware connected to the part.
*/
extern void board_init(void);
#endif // #ifdef __AVR32_ABI_COMPILER__
#else
/*! \brief This function initializes the board target resources
*
* This function should be called to ensure proper initialization of the target
* board hardware connected to the part.
*/
extern void board_init(void);
#endif
#ifdef __cplusplus
}
#endif
/**
* \}
*/
#endif // _BOARD_H_