| /* |
| * Copyright (c) 2016, Texas Instruments Incorporated |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * * Neither the name of Texas Instruments Incorporated nor the names of |
| * its contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, |
| * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; |
| * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR |
| * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, |
| * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef __BOARD_H |
| #define __BOARD_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #include <ti/drivers/ADC.h> |
| #include <ti/drivers/GPIO.h> |
| #include <ti/drivers/I2C.h> |
| #include <ti/drivers/I2S.h> |
| #include <ti/drivers/PWM.h> |
| #include <ti/drivers/SDSPI.h> |
| #include <ti/drivers/SD.h> |
| #include <ti/drivers/SPI.h> |
| #include <ti/drivers/UART.h> |
| #include <ti/drivers/Watchdog.h> |
| |
| #include "CC3220SF_LAUNCHXL.h" |
| |
| #define Board_initGeneral CC3220SF_LAUNCHXL_initGeneral |
| |
| #define Board_ADC0 CC3220SF_LAUNCHXL_ADC0 |
| #define Board_ADC1 CC3220SF_LAUNCHXL_ADC1 |
| |
| #define Board_CRYPTO0 CC3220SF_LAUNCHXL_CRYPTO0 |
| |
| #define Board_GPIO_LED_ON CC3220SF_LAUNCHXL_GPIO_LED_ON |
| #define Board_GPIO_LED_OFF CC3220SF_LAUNCHXL_GPIO_LED_OFF |
| #define Board_GPIO_LED0 CC3220SF_LAUNCHXL_GPIO_LED_D7 |
| /* |
| * CC3220SF_LAUNCHXL_GPIO_LED_D5 and CC3220SF_LAUNCHXL_GPIO_LED_D6 are shared with the I2C |
| * and PWM peripherals. In order for those examples to work, these LEDs are |
| * taken out of gpioPinCOnfig[] |
| */ |
| #define Board_GPIO_LED1 CC3220SF_LAUNCHXL_GPIO_LED_D7 |
| #define Board_GPIO_LED2 CC3220SF_LAUNCHXL_GPIO_LED_D7 |
| |
| #define Board_GPIO_BUTTON0 CC3220SF_LAUNCHXL_GPIO_SW2 |
| #define Board_GPIO_BUTTON1 CC3220SF_LAUNCHXL_GPIO_SW3 |
| |
| #define Board_I2C0 CC3220SF_LAUNCHXL_I2C0 |
| #define Board_I2C_TMP CC3220SF_LAUNCHXL_I2C0 |
| |
| #define Board_I2S0 CC3220SF_LAUNCHXL_I2S0 |
| |
| #define Board_PWM0 CC3220SF_LAUNCHXL_PWM6 |
| #define Board_PWM1 CC3220SF_LAUNCHXL_PWM7 |
| |
| #define Board_SDSPI0 CC3220SF_LAUNCHXL_SDSPI0 |
| |
| #define Board_SD0 CC3220SF_LAUNCHXL_SD0 |
| |
| #define Board_SDFatFS0 CC3220SF_LAUNCHXL_SD0 |
| |
| /* CC3220SF_LAUNCHXL_SPI0 is reserved for the NWP */ |
| #define Board_SPI0 CC3220SF_LAUNCHXL_SPI1 |
| |
| #define Board_UART0 CC3220SF_LAUNCHXL_UART0 |
| #define Board_UART1 CC3220SF_LAUNCHXL_UART1 |
| |
| #define Board_WATCHDOG0 CC3220SF_LAUNCHXL_WATCHDOG0 |
| |
| /* Board specific I2C addresses */ |
| #define Board_TMP_ADDR (0x41) |
| #define Board_SENSORS_BP_TMP_ADDR (0x40) |
| |
| /* |
| * These macros are provided for backwards compatibility. |
| * Please use the <Driver>_init functions directly rather |
| * than Board_init<Driver>. |
| */ |
| #define Board_initADC ADC_init |
| #define Board_initGPIO GPIO_init |
| #define Board_initI2C I2C_init |
| #define Board_initI2S I2S_init |
| #define Board_initPWM PWM_init |
| #define Board_initSDSPI SDSPI_init |
| #define Board_initSD SD_init |
| #define Board_initSDFatFS SDFatFS_init |
| #define Board_initSPI SPI_init |
| #define Board_initUART UART_init |
| #define Board_initWatchdog Watchdog_init |
| |
| /* |
| * These macros are provided for backwards compatibility. |
| * Please use the corresponding 'Board_GPIO_xxx' macros as the macros |
| * below are deprecated. |
| */ |
| #define Board_LED_ON Board_GPIO_LED_ON |
| #define Board_LED_OFF Board_GPIO_LED_OFF |
| #define Board_LED0 Board_GPIO_LED0 |
| #define Board_LED1 Board_GPIO_LED1 |
| #define Board_LED2 Board_GPIO_LED2 |
| #define Board_BUTTON0 Board_GPIO_BUTTON0 |
| #define Board_BUTTON1 Board_GPIO_BUTTON1 |
| #define Board_TMP006_ADDR Board_TMP_ADDR |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* __BOARD_H */ |
