| /* |
| * ------------------------------------------- |
| * CC3220 SDK - v0.10.00.00 |
| * ------------------------------------------- |
| * |
| * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the |
| * distribution. |
| * |
| * Neither the name of Texas Instruments Incorporated nor the names of |
| * its contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| */ |
| //***************************************************************************** |
| // |
| // prcm.h |
| // |
| // Prototypes for the PRCM control driver. |
| // |
| //***************************************************************************** |
| |
| #ifndef __PRCM_H__ |
| #define __PRCM_H__ |
| |
| //***************************************************************************** |
| // |
| // If building with a C++ compiler, make all of the definitions in this header |
| // have a C binding. |
| // |
| //***************************************************************************** |
| #ifdef __cplusplus |
| extern "C" |
| { |
| #endif |
| |
| //***************************************************************************** |
| // |
| // Peripheral clock and reset control registers |
| // |
| //***************************************************************************** |
| typedef struct _PRCM_PeripheralRegs_ |
| { |
| |
| unsigned long ulClkReg; |
| unsigned long ulRstReg; |
| |
| }PRCM_PeriphRegs_t; |
| |
| //***************************************************************************** |
| // Values that can be passed to PRCMPeripheralEnable() and |
| // PRCMPeripheralDisable() |
| //***************************************************************************** |
| #define PRCM_RUN_MODE_CLK 0x00000001 |
| #define PRCM_SLP_MODE_CLK 0x00000100 |
| |
| //***************************************************************************** |
| // Values that can be passed to PRCMSRAMRetentionEnable() and |
| // PRCMSRAMRetentionDisable() as ulSramColSel. |
| //***************************************************************************** |
| #define PRCM_SRAM_COL_1 0x00000001 |
| #define PRCM_SRAM_COL_2 0x00000002 |
| #define PRCM_SRAM_COL_3 0x00000004 |
| #define PRCM_SRAM_COL_4 0x00000008 |
| |
| //***************************************************************************** |
| // Values that can be passed to PRCMSRAMRetentionEnable() and |
| // PRCMSRAMRetentionDisable() as ulModeFlags. |
| //***************************************************************************** |
| #define PRCM_SRAM_LPDS_RET 0x00000002 |
| |
| //***************************************************************************** |
| // Values that can be passed to PRCMLPDSWakeupSourceEnable(), |
| // PRCMLPDSWakeupCauseGet() and PRCMLPDSWakeupSourceDisable(). |
| //***************************************************************************** |
| #define PRCM_LPDS_HOST_IRQ 0x00000080 |
| #define PRCM_LPDS_GPIO 0x00000010 |
| #define PRCM_LPDS_TIMER 0x00000001 |
| |
| //***************************************************************************** |
| // Values that can be passed to PRCMLPDSWakeUpGPIOSelect() as Type |
| //***************************************************************************** |
| #define PRCM_LPDS_LOW_LEVEL 0x00000002 |
| #define PRCM_LPDS_HIGH_LEVEL 0x00000000 |
| #define PRCM_LPDS_FALL_EDGE 0x00000001 |
| #define PRCM_LPDS_RISE_EDGE 0x00000003 |
| |
| //***************************************************************************** |
| // Values that can be passed to PRCMLPDSWakeUpGPIOSelect() |
| //***************************************************************************** |
| #define PRCM_LPDS_GPIO2 0x00000000 |
| #define PRCM_LPDS_GPIO4 0x00000001 |
| #define PRCM_LPDS_GPIO13 0x00000002 |
| #define PRCM_LPDS_GPIO17 0x00000003 |
| #define PRCM_LPDS_GPIO11 0x00000004 |
| #define PRCM_LPDS_GPIO24 0x00000005 |
| #define PRCM_LPDS_GPIO26 0x00000006 |
| |
| //***************************************************************************** |
| // Values that can be passed to PRCMHibernateWakeupSourceEnable(), |
| // PRCMHibernateWakeupSourceDisable(). |
| //***************************************************************************** |
| #define PRCM_HIB_SLOW_CLK_CTR 0x00000001 |
| |
| //***************************************************************************** |
| // Values that can be passed to PRCMHibernateWakeUpGPIOSelect() as ulType |
| //***************************************************************************** |
| #define PRCM_HIB_LOW_LEVEL 0x00000000 |
| #define PRCM_HIB_HIGH_LEVEL 0x00000001 |
| #define PRCM_HIB_FALL_EDGE 0x00000002 |
| #define PRCM_HIB_RISE_EDGE 0x00000003 |
| |
| //***************************************************************************** |
| // Values that can be passed to PRCMHibernateWakeupSourceEnable(), |
| // PRCMHibernateWakeupSourceDisable(), PRCMHibernateWakeUpGPIOSelect() |
| //***************************************************************************** |
| #define PRCM_HIB_GPIO2 0x00010000 |
| #define PRCM_HIB_GPIO4 0x00020000 |
| #define PRCM_HIB_GPIO13 0x00040000 |
| #define PRCM_HIB_GPIO17 0x00080000 |
| #define PRCM_HIB_GPIO11 0x00100000 |
| #define PRCM_HIB_GPIO24 0x00200000 |
| #define PRCM_HIB_GPIO26 0x00400000 |
| |
| //***************************************************************************** |
| // Values that will be returned from PRCMSysResetCauseGet(). |
| //***************************************************************************** |
| #define PRCM_POWER_ON 0x00000000 |
| #define PRCM_LPDS_EXIT 0x00000001 |
| #define PRCM_CORE_RESET 0x00000003 |
| #define PRCM_MCU_RESET 0x00000004 |
| #define PRCM_WDT_RESET 0x00000005 |
| #define PRCM_SOC_RESET 0x00000006 |
| #define PRCM_HIB_EXIT 0x00000007 |
| |
| //***************************************************************************** |
| // Values that can be passed to PRCMHibernateWakeupCauseGet(). |
| //***************************************************************************** |
| #define PRCM_HIB_WAKEUP_CAUSE_SLOW_CLOCK 0x00000002 |
| #define PRCM_HIB_WAKEUP_CAUSE_GPIO 0x00000004 |
| |
| //***************************************************************************** |
| // Values that can be passed to PRCMSEnableInterrupt |
| //***************************************************************************** |
| #define PRCM_INT_SLOW_CLK_CTR 0x00004000 |
| |
| //***************************************************************************** |
| // Values that can be passed to PRCMPeripheralClkEnable(), |
| // PRCMPeripheralClkDisable(), PRCMPeripheralReset() |
| //***************************************************************************** |
| #define PRCM_CAMERA 0x00000000 |
| #define PRCM_I2S 0x00000001 |
| #define PRCM_SDHOST 0x00000002 |
| #define PRCM_GSPI 0x00000003 |
| #define PRCM_LSPI 0x00000004 |
| #define PRCM_UDMA 0x00000005 |
| #define PRCM_GPIOA0 0x00000006 |
| #define PRCM_GPIOA1 0x00000007 |
| #define PRCM_GPIOA2 0x00000008 |
| #define PRCM_GPIOA3 0x00000009 |
| #define PRCM_GPIOA4 0x0000000A |
| #define PRCM_WDT 0x0000000B |
| #define PRCM_UARTA0 0x0000000C |
| #define PRCM_UARTA1 0x0000000D |
| #define PRCM_TIMERA0 0x0000000E |
| #define PRCM_TIMERA1 0x0000000F |
| #define PRCM_TIMERA2 0x00000010 |
| #define PRCM_TIMERA3 0x00000011 |
| #define PRCM_DTHE 0x00000012 |
| #define PRCM_SSPI 0x00000013 |
| #define PRCM_I2CA0 0x00000014 |
| // Note : PRCM_ADC is a dummy define for pinmux utility code generation |
| // PRCM_ADC should never be used in any user code. |
| #define PRCM_ADC 0x000000FF |
| |
| |
| //***************************************************************************** |
| // Values that can be passed to PRCMIORetEnable() and PRCMIORetDisable() |
| //***************************************************************************** |
| #define PRCM_IO_RET_GRP_0 0x00000001 |
| #define PRCM_IO_RET_GRP_1 0x00000002 |
| #define PRCM_IO_RET_GRP_2 0x00000004 |
| #define PRCM_IO_RET_GRP_3 0x00000008 |
| |
| //***************************************************************************** |
| // Macros definig the device type |
| //***************************************************************************** |
| #define PRCM_DEV_TYPE_FLAG_R 0x00000001 |
| #define PRCM_DEV_TYPE_FLAG_F 0x00000002 |
| #define PRCM_DEV_TYPE_FLAG_Z 0x00000004 |
| #define PRCM_DEV_TYPE_FLAG_SECURE 0x00000008 |
| #define PRCM_DEV_TYPE_FLAG_PRE_PROD 0x00000010 |
| #define PRCM_DEV_TYPE_FLAG_3200 0x00000020 |
| #define PRCM_DEV_TYPE_FLAG_3220 0x00000040 |
| #define PRCM_DEV_TYPE_FLAG_REV1 0x00010000 |
| #define PRCM_DEV_TYPE_FLAG_REV2 0x00020000 |
| |
| //***************************************************************************** |
| // Pre-defined helper macros |
| //***************************************************************************** |
| #define PRCM_DEV_TYPE_PRE_CC3200R (PRCM_DEV_TYPE_FLAG_PRE_PROD| \ |
| PRCM_DEV_TYPE_FLAG_3200| \ |
| PRCM_DEV_TYPE_FLAG_R) |
| |
| #define PRCM_DEV_TYPE_PRE_CC3200F (PRCM_DEV_TYPE_FLAG_PRE_PROD| \ |
| PRCM_DEV_TYPE_FLAG_3200| \ |
| PRCM_DEV_TYPE_FLAG_F) |
| |
| #define PRCM_DEV_TYPE_PRE_CC3200Z (PRCM_DEV_TYPE_FLAG_PRE_PROD| \ |
| PRCM_DEV_TYPE_FLAG_3200| \ |
| PRCM_DEV_TYPE_FLAG_Z) |
| |
| #define PRCM_DEV_TYPE_CC3200R (PRCM_DEV_TYPE_FLAG_PRE_PROD| \ |
| PRCM_DEV_TYPE_FLAG_3200| \ |
| PRCM_DEV_TYPE_FLAG_R) |
| |
| #define PRCM_DEV_TYPE_PRE_CC3220R (PRCM_DEV_TYPE_FLAG_PRE_PROD| \ |
| PRCM_DEV_TYPE_FLAG_3220| \ |
| PRCM_DEV_TYPE_FLAG_R) |
| |
| #define PRCM_DEV_TYPE_PRE_CC3220F (PRCM_DEV_TYPE_FLAG_PRE_PROD| \ |
| PRCM_DEV_TYPE_FLAG_3220| \ |
| PRCM_DEV_TYPE_FLAG_F) |
| |
| #define PRCM_DEV_TYPE_PRE_CC3220Z (PRCM_DEV_TYPE_FLAG_PRE_PROD| \ |
| PRCM_DEV_TYPE_FLAG_3220| \ |
| PRCM_DEV_TYPE_FLAG_Z) |
| |
| #define PRCM_DEV_TYPE_CC3220R (PRCM_DEV_TYPE_FLAG_3220| \ |
| PRCM_DEV_TYPE_FLAG_R) |
| |
| |
| #define PRCM_DEV_TYPE_PRE_CC3220RS (PRCM_DEV_TYPE_FLAG_PRE_PROD| \ |
| PRCM_DEV_TYPE_FLAG_3220| \ |
| PRCM_DEV_TYPE_FLAG_R| \ |
| PRCM_DEV_TYPE_FLAG_SECURE) |
| |
| #define PRCM_DEV_TYPE_PRE_CC3220FS (PRCM_DEV_TYPE_FLAG_PRE_PROD| \ |
| PRCM_DEV_TYPE_FLAG_3220| \ |
| PRCM_DEV_TYPE_FLAG_F| \ |
| PRCM_DEV_TYPE_FLAG_SECURE) |
| |
| #define PRCM_DEV_TYPE_PRE_CC3220ZS (PRCM_DEV_TYPE_FLAG_PRE_PROD| \ |
| PRCM_DEV_TYPE_FLAG_3220| \ |
| PRCM_DEV_TYPE_FLAG_Z| \ |
| PRCM_DEV_TYPE_FLAG_SECURE) |
| |
| #define PRCM_DEV_TYPE_CC3220RS (PRCM_DEV_TYPE_FLAG_3220| \ |
| PRCM_DEV_TYPE_FLAG_R| \ |
| PRCM_DEV_TYPE_FLAG_SECURE) |
| |
| #define PRCM_DEV_TYPE_CC3220FS (PRCM_DEV_TYPE_FLAG_3220| \ |
| PRCM_DEV_TYPE_FLAG_F| \ |
| PRCM_DEV_TYPE_FLAG_SECURE) |
| |
| |
| #define PRCM_DEV_TYPE_PRE_CC3220Z1 (PRCM_DEV_TYPE_FLAG_PRE_PROD| \ |
| PRCM_DEV_TYPE_FLAG_3220| \ |
| PRCM_DEV_TYPE_FLAG_Z| \ |
| PRCM_DEV_TYPE_FLAG_REV1) |
| |
| #define PRCM_DEV_TYPE_PRE_CC3220Z2 (PRCM_DEV_TYPE_FLAG_PRE_PROD| \ |
| PRCM_DEV_TYPE_FLAG_3220| \ |
| PRCM_DEV_TYPE_FLAG_Z| \ |
| PRCM_DEV_TYPE_FLAG_REV2) |
| |
| //***************************************************************************** |
| // |
| // API Function prototypes |
| // |
| //***************************************************************************** |
| extern void PRCMMCUReset(tBoolean bIncludeSubsystem); |
| extern unsigned long PRCMSysResetCauseGet(void); |
| |
| extern void PRCMPeripheralClkEnable(unsigned long ulPeripheral, |
| unsigned long ulClkFlags); |
| extern void PRCMPeripheralClkDisable(unsigned long ulPeripheral, |
| unsigned long ulClkFlags); |
| extern void PRCMPeripheralReset(unsigned long ulPeripheral); |
| extern tBoolean PRCMPeripheralStatusGet(unsigned long ulPeripheral); |
| |
| extern void PRCMI2SClockFreqSet(unsigned long ulI2CClkFreq); |
| extern unsigned long PRCMPeripheralClockGet(unsigned long ulPeripheral); |
| |
| extern void PRCMSleepEnter(void); |
| |
| extern void PRCMSRAMRetentionEnable(unsigned long ulSramColSel, |
| unsigned long ulFlags); |
| extern void PRCMSRAMRetentionDisable(unsigned long ulSramColSel, |
| unsigned long ulFlags); |
| extern void PRCMLPDSRestoreInfoSet(unsigned long ulRestoreSP, |
| unsigned long ulRestorePC); |
| extern void PRCMLPDSEnter(void); |
| extern void PRCMLPDSIntervalSet(unsigned long ulTicks); |
| extern void PRCMLPDSWakeupSourceEnable(unsigned long ulLpdsWakeupSrc); |
| extern unsigned long PRCMLPDSWakeupCauseGet(void); |
| extern void PRCMLPDSWakeUpGPIOSelect(unsigned long ulGPIOPin, |
| unsigned long ulType); |
| extern void PRCMLPDSWakeupSourceDisable(unsigned long ulLpdsWakeupSrc); |
| |
| extern void PRCMHibernateEnter(void); |
| extern void PRCMHibernateWakeupSourceEnable(unsigned long ulHIBWakupSrc); |
| extern unsigned long PRCMHibernateWakeupCauseGet(void); |
| extern void PRCMHibernateWakeUpGPIOSelect(unsigned long ulMultiGPIOBitMap, |
| unsigned long ulType); |
| extern void PRCMHibernateWakeupSourceDisable(unsigned long ulHIBWakupSrc); |
| extern void PRCMHibernateIntervalSet(unsigned long long ullTicks); |
| |
| extern unsigned long long PRCMSlowClkCtrGet(void); |
| extern unsigned long long PRCMSlowClkCtrFastGet(void); |
| extern void PRCMSlowClkCtrMatchSet(unsigned long long ullTicks); |
| extern unsigned long long PRCMSlowClkCtrMatchGet(void); |
| |
| extern void PRCMOCRRegisterWrite(unsigned char ucIndex, |
| unsigned long ulRegValue); |
| extern unsigned long PRCMOCRRegisterRead(unsigned char ucIndex); |
| |
| extern void PRCMIntRegister(void (*pfnHandler)(void)); |
| extern void PRCMIntUnregister(void); |
| extern void PRCMIntEnable(unsigned long ulIntFlags); |
| extern void PRCMIntDisable(unsigned long ulIntFlags); |
| extern unsigned long PRCMIntStatus(void); |
| extern void PRCMRTCInUseSet(void); |
| extern tBoolean PRCMRTCInUseGet(void); |
| extern void PRCMRTCSet(unsigned long ulSecs, unsigned short usMsec); |
| extern void PRCMRTCGet(unsigned long *ulSecs, unsigned short *usMsec); |
| extern void PRCMRTCMatchSet(unsigned long ulSecs, unsigned short usMsec); |
| extern void PRCMRTCMatchGet(unsigned long *ulSecs, unsigned short *usMsec); |
| extern void PRCMCC3200MCUInit(void); |
| extern unsigned long PRCMHIBRegRead(unsigned long ulRegAddr); |
| extern void PRCMHIBRegWrite(unsigned long ulRegAddr, unsigned long ulValue); |
| extern unsigned long PRCMCameraFreqSet(unsigned char ulDivider, |
| unsigned char ulWidth); |
| extern void PRCMIORetentionEnable(unsigned long ulIORetGrpFlags); |
| extern void PRCMIORetentionDisable(unsigned long ulIORetGrpFlags); |
| extern unsigned long PRCMDeviceTypeGet(void); |
| extern void PRCMLPDSEnterKeepDebugIf(void); |
| extern void PRCMHibernateCycleTrigger(void); |
| |
| |
| //***************************************************************************** |
| // |
| // Mark the end of the C bindings section for C++ compilers. |
| // |
| //***************************************************************************** |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif // __PRCM_H__ |
