| /* |
| * ------------------------------------------- |
| * CC3220 SDK - v0.10.00.00 |
| * ------------------------------------------- |
| * |
| * Copyright (C) 2015 Texas Instruments Incorporated - http://www.ti.com/ |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the |
| * distribution. |
| * |
| * Neither the name of Texas Instruments Incorporated nor the names of |
| * its contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT |
| * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, |
| * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY |
| * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| */ |
| //***************************************************************************** |
| // |
| // shamd5.h |
| // |
| // Defines and Macros for the SHA/MD5. |
| // |
| //***************************************************************************** |
| |
| #ifndef __DRIVERLIB_SHAMD5_H__ |
| #define __DRIVERLIB_SHAMD5_H__ |
| |
| //***************************************************************************** |
| // |
| // If building with a C++ compiler, make all of the definitions in this header |
| // have a C binding. |
| // |
| //***************************************************************************** |
| #ifdef __cplusplus |
| extern "C" |
| { |
| #endif |
| |
| //***************************************************************************** |
| // |
| // The following defines are used to specify the algorithm in use in the |
| // SHA/MD5 module. |
| // |
| //***************************************************************************** |
| #define SHAMD5_ALGO_MD5 0x00000018 // MD5 |
| #define SHAMD5_ALGO_SHA1 0x0000001a // SHA-1 |
| #define SHAMD5_ALGO_SHA224 0x0000001c // SHA-224 |
| #define SHAMD5_ALGO_SHA256 0x0000001e // SHA-256 |
| #define SHAMD5_ALGO_HMAC_MD5 0x00000000 // HMAC-MD5 |
| #define SHAMD5_ALGO_HMAC_SHA1 0x00000002 // HMAC-SHA-1 |
| #define SHAMD5_ALGO_HMAC_SHA224 0x00000004 // HMAC-SHA-224 |
| #define SHAMD5_ALGO_HMAC_SHA256 0x00000006 // HMAC-SHA-256 |
| |
| //***************************************************************************** |
| // |
| // The following defines are used to represent the different interrupt sources |
| // in SHAMD5IntEnable(), SHAMD5IntDisable(), SHAMD5GetIntStatus(), and |
| // SHAMD5BlockOnIntStatus() functions. |
| // |
| //***************************************************************************** |
| #define SHAMD5_INT_CONTEXT_READY 0x00000008 |
| #define SHAMD5_INT_PARTHASH_READY 0x00000004 |
| #define SHAMD5_INT_INPUT_READY 0x00000002 |
| #define SHAMD5_INT_OUTPUT_READY 0x00000001 |
| #define SHAMD5_INT_DMA_CONTEXT_IN 0x00010000 |
| #define SHAMD5_INT_DMA_DATA_IN 0x00020000 |
| #define SHAMD5_INT_DMA_CONTEXT_OUT 0x00040000 |
| |
| //***************************************************************************** |
| // |
| // Function prototypes |
| // |
| //***************************************************************************** |
| extern void SHAMD5ConfigSet(uint32_t ui32Base, uint32_t ui32Mode); |
| extern bool SHAMD5DataProcess(uint32_t ui32Base, uint8_t *pui8DataSrc, |
| uint32_t ui32DataLength, uint8_t *pui8HashResult); |
| extern void SHAMD5DataWrite(uint32_t ui32Base, uint8_t *pui8Src); |
| extern bool SHAMD5DataWriteNonBlocking(uint32_t ui32Base, uint8_t *pui8Src); |
| extern void SHAMD5DMADisable(uint32_t ui32Base); |
| extern void SHAMD5DMAEnable(uint32_t ui32Base); |
| extern void SHAMD5DataLengthSet(uint32_t ui32Base, uint32_t ui32Length); |
| extern void SHAMD5HMACKeySet(uint32_t ui32Base, uint8_t *pui8Src); |
| extern void SHAMD5HMACPPKeyGenerate(uint32_t ui32Base, uint8_t *pui8Key, |
| uint8_t *pui8PPKey); |
| extern void SHAMD5HMACPPKeySet(uint32_t ui32Base, uint8_t *pui8Src); |
| extern bool SHAMD5HMACProcess(uint32_t ui32Base, uint8_t *pui8DataSrc, |
| uint32_t ui32DataLength, uint8_t *pui8HashResult); |
| extern void SHAMD5IntClear(uint32_t ui32Base, uint32_t ui32IntFlags); |
| extern void SHAMD5IntDisable(uint32_t ui32Base, uint32_t ui32IntFlags); |
| extern void SHAMD5IntEnable(uint32_t ui32Base, uint32_t ui32IntFlags); |
| extern void SHAMD5IntRegister(uint32_t ui32Base, void(*pfnHandler)(void)); |
| extern uint32_t SHAMD5IntStatus(uint32_t ui32Base, bool bMasked); |
| extern void SHAMD5IntUnregister(uint32_t ui32Base); |
| extern void SHAMD5ResultRead(uint32_t ui32Base, uint8_t *pui8Dest); |
| |
| //***************************************************************************** |
| // |
| // Mark the end of the C bindings section for C++ compilers. |
| // |
| //***************************************************************************** |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif // __DRIVERLIB_SHAMD5_H__ |
