| /** | |
| ****************************************************************************** | |
| * @file FreeRTOS/FreeRTOS_HwSemaphoreCoreSync/CM4/Inc/stm32h7xx_hal_conf.h | |
| * @author MCD Application Team | |
| * @brief HAL configuration file for Cortex-M4. | |
| ****************************************************************************** | |
| * @attention | |
| * | |
| * <h2><center>© Copyright (c) 2019 STMicroelectronics. | |
| * All rights reserved.</center></h2> | |
| * | |
| * This software component is licensed by ST under BSD 3-Clause license, | |
| * the "License"; You may not use this file except in compliance with the | |
| * License. You may obtain a copy of the License at: | |
| * opensource.org/licenses/BSD-3-Clause | |
| * | |
| ****************************************************************************** | |
| */ | |
| /* Define to prevent recursive inclusion -------------------------------------*/ | |
| #ifndef __STM32H7xx_HAL_CONF_H | |
| #define __STM32H7xx_HAL_CONF_H | |
| #ifdef __cplusplus | |
| extern "C" { | |
| #endif | |
| /* Exported types ------------------------------------------------------------*/ | |
| /* Exported constants --------------------------------------------------------*/ | |
| /* ########################## Module Selection ############################## */ | |
| /** | |
| * @brief This is the list of modules to be used in the HAL driver | |
| */ | |
| #define HAL_MODULE_ENABLED | |
| #define HAL_ADC_MODULE_ENABLED | |
| /* #define HAL_CEC_MODULE_ENABLED */ | |
| /* #define HAL_COMP_MODULE_ENABLED */ | |
| #define HAL_CORTEX_MODULE_ENABLED | |
| /* #define HAL_CRC_MODULE_ENABLED */ | |
| /* #define HAL_CRYP_MODULE_ENABLED */ | |
| /* #define HAL_DAC_MODULE_ENABLED */ | |
| /* #define HAL_DCMI_MODULE_ENABLED */ | |
| /* #define HAL_DFSDM_MODULE_ENABLED */ | |
| #define HAL_DMA_MODULE_ENABLED | |
| /* #define HAL_DMA2D_MODULE_ENABLED */ | |
| /* #define HAL_ETH_MODULE_ENABLED */ | |
| /* #define HAL_EXTI_MODULE_ENABLED */ | |
| /* #define HAL_FDCAN_MODULE_ENABLED */ | |
| #define HAL_FLASH_MODULE_ENABLED | |
| #define HAL_GPIO_MODULE_ENABLED | |
| /* #define HAL_HASH_MODULE_ENABLED */ | |
| /* #define HAL_HCD_MODULE_ENABLED */ | |
| /* #define HAL_HRTIM_MODULE_ENABLED */ | |
| #define HAL_HSEM_MODULE_ENABLED | |
| #define HAL_I2C_MODULE_ENABLED | |
| /* #define HAL_I2S_MODULE_ENABLED */ | |
| /* #define HAL_IRDA_MODULE_ENABLED */ | |
| /* #define HAL_IWDG_MODULE_ENABLED */ | |
| /* #define HAL_JPEG_MODULE_ENABLED */ | |
| /* #define HAL_LPTIM_MODULE_ENABLED */ | |
| /* #define HAL_LTDC_MODULE_ENABLED */ | |
| /* #define HAL_MDIOS_MODULE_ENABLED */ | |
| /* #define HAL_MDMA_MODULE_ENABLED */ | |
| /* #define HAL_MMC_MODULE_ENABLED */ | |
| /* #define HAL_NAND_MODULE_ENABLED */ | |
| /* #define HAL_NOR_MODULE_ENABLED */ | |
| /* #define HAL_OPAMP_MODULE_ENABLED */ | |
| /* #define HAL_PCD_MODULE_ENABLED */ | |
| #define HAL_PWR_MODULE_ENABLED | |
| /* #define HAL_QSPI_MODULE_ENABLED */ | |
| /* #define HAL_RAMECC_MODULE_ENABLED */ | |
| #define HAL_RCC_MODULE_ENABLED | |
| /* #define HAL_RNG_MODULE_ENABLED */ | |
| /* #define HAL_RTC_MODULE_ENABLED */ | |
| /* #define HAL_SAI_MODULE_ENABLED */ | |
| /* #define HAL_SD_MODULE_ENABLED */ | |
| /* #define HAL_SDRAM_MODULE_ENABLED */ | |
| /* #define HAL_SMARTCARD_MODULE_ENABLED */ | |
| /* #define HAL_SMBUS_MODULE_ENABLED */ | |
| /* #define HAL_SPDIFRX_MODULE_ENABLED */ | |
| /* #define HAL_SPI_MODULE_ENABLED */ | |
| /* #define HAL_SRAM_MODULE_ENABLED */ | |
| /* #define HAL_SWPMI_MODULE_ENABLED */ | |
| /* #define HAL_TIM_MODULE_ENABLED */ | |
| #define HAL_UART_MODULE_ENABLED | |
| /* #define HAL_USART_MODULE_ENABLED */ | |
| /* #define HAL_WWDG_MODULE_ENABLED */ | |
| /* ########################## Oscillator Values adaptation ####################*/ | |
| /** | |
| * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. | |
| * This value is used by the RCC HAL module to compute the system frequency | |
| * (when HSE is used as system clock source, directly or through the PLL). | |
| */ | |
| #if !defined (HSE_VALUE) | |
| #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ | |
| #endif /* HSE_VALUE */ | |
| #if !defined (HSE_STARTUP_TIMEOUT) | |
| #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ | |
| #endif /* HSE_STARTUP_TIMEOUT */ | |
| /** | |
| * @brief Internal oscillator (CSI) default value. | |
| * This value is the default CSI value after Reset. | |
| */ | |
| #if !defined (CSI_VALUE) | |
| #define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/ | |
| #endif /* CSI_VALUE */ | |
| /** | |
| * @brief Internal High Speed oscillator (HSI) value. | |
| * This value is used by the RCC HAL module to compute the system frequency | |
| * (when HSI is used as system clock source, directly or through the PLL). | |
| */ | |
| #if !defined (HSI_VALUE) | |
| #define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/ | |
| #endif /* HSI_VALUE */ | |
| /** | |
| * @brief External Low Speed oscillator (LSE) value. | |
| * This value is used by the UART, RTC HAL module to compute the system frequency | |
| */ | |
| #if !defined (LSE_VALUE) | |
| #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External oscillator in Hz*/ | |
| #endif /* LSE_VALUE */ | |
| #if !defined (LSE_STARTUP_TIMEOUT) | |
| #define LSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for LSE start up, in ms */ | |
| #endif /* LSE_STARTUP_TIMEOUT */ | |
| #if !defined (LSI_VALUE) | |
| #define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/ | |
| #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz | |
| The real value may vary depending on the variations | |
| in voltage and temperature.*/ | |
| /** | |
| * @brief External clock source for I2S peripheral | |
| * This value is used by the I2S HAL module to compute the I2S clock source | |
| * frequency, this source is inserted directly through I2S_CKIN pad. | |
| */ | |
| #if !defined (EXTERNAL_CLOCK_VALUE) | |
| #define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External clock in Hz*/ | |
| #endif /* EXTERNAL_CLOCK_VALUE */ | |
| /* Tip: To avoid modifying this file each time you need to use different HSE, | |
| === you can define the HSE value in your toolchain compiler preprocessor. */ | |
| /* ########################### System Configuration ######################### */ | |
| /** | |
| * @brief This is the HAL system configuration section | |
| */ | |
| #define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ | |
| #define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */ | |
| #define USE_RTOS 0 | |
| #define USE_SD_TRANSCEIVER 1U /*!< use uSD Transceiver */ | |
| /* ########################### Ethernet Configuration ######################### */ | |
| #define ETH_TX_DESC_CNT 4 /* number of Ethernet Tx DMA descriptors */ | |
| #define ETH_RX_DESC_CNT 4 /* number of Ethernet Rx DMA descriptors */ | |
| #define ETH_MAC_ADDR0 ((uint8_t)0x02) | |
| #define ETH_MAC_ADDR1 ((uint8_t)0x00) | |
| #define ETH_MAC_ADDR2 ((uint8_t)0x00) | |
| #define ETH_MAC_ADDR3 ((uint8_t)0x00) | |
| #define ETH_MAC_ADDR4 ((uint8_t)0x00) | |
| #define ETH_MAC_ADDR5 ((uint8_t)0x00) | |
| /* ########################## Assert Selection ############################## */ | |
| /** | |
| * @brief Uncomment the line below to expanse the "assert_param" macro in the | |
| * HAL drivers code | |
| */ | |
| /* #define USE_FULL_ASSERT 1 */ | |
| /* Includes ------------------------------------------------------------------*/ | |
| /** | |
| * @brief Include module's header file | |
| */ | |
| #ifdef HAL_RCC_MODULE_ENABLED | |
| #include "stm32h7xx_hal_rcc.h" | |
| #endif /* HAL_RCC_MODULE_ENABLED */ | |
| #ifdef HAL_GPIO_MODULE_ENABLED | |
| #include "stm32h7xx_hal_gpio.h" | |
| #endif /* HAL_GPIO_MODULE_ENABLED */ | |
| #ifdef HAL_DMA_MODULE_ENABLED | |
| #include "stm32h7xx_hal_dma.h" | |
| #endif /* HAL_DMA_MODULE_ENABLED */ | |
| #ifdef HAL_MDMA_MODULE_ENABLED | |
| #include "stm32h7xx_hal_mdma.h" | |
| #endif /* HAL_MDMA_MODULE_ENABLED */ | |
| #ifdef HAL_HASH_MODULE_ENABLED | |
| #include "stm32h7xx_hal_hash.h" | |
| #endif /* HAL_HASH_MODULE_ENABLED */ | |
| #ifdef HAL_DCMI_MODULE_ENABLED | |
| #include "stm32h7xx_hal_dcmi.h" | |
| #endif /* HAL_DCMI_MODULE_ENABLED */ | |
| #ifdef HAL_DMA2D_MODULE_ENABLED | |
| #include "stm32h7xx_hal_dma2d.h" | |
| #endif /* HAL_DMA2D_MODULE_ENABLED */ | |
| #ifdef HAL_DFSDM_MODULE_ENABLED | |
| #include "stm32h7xx_hal_dfsdm.h" | |
| #endif /* HAL_DFSDM_MODULE_ENABLED */ | |
| #ifdef HAL_ETH_MODULE_ENABLED | |
| #include "stm32h7xx_hal_eth.h" | |
| #endif /* HAL_ETH_MODULE_ENABLED */ | |
| #ifdef HAL_EXTI_MODULE_ENABLED | |
| #include "stm32h7xx_hal_exti.h" | |
| #endif /* HAL_EXTI_MODULE_ENABLED */ | |
| #ifdef HAL_CORTEX_MODULE_ENABLED | |
| #include "stm32h7xx_hal_cortex.h" | |
| #endif /* HAL_CORTEX_MODULE_ENABLED */ | |
| #ifdef HAL_ADC_MODULE_ENABLED | |
| #include "stm32h7xx_hal_adc.h" | |
| #endif /* HAL_ADC_MODULE_ENABLED */ | |
| #ifdef HAL_FDCAN_MODULE_ENABLED | |
| #include "stm32h7xx_hal_fdcan.h" | |
| #endif /* HAL_FDCAN_MODULE_ENABLED */ | |
| #ifdef HAL_CEC_MODULE_ENABLED | |
| #include "stm32h7xx_hal_cec.h" | |
| #endif /* HAL_CEC_MODULE_ENABLED */ | |
| #ifdef HAL_COMP_MODULE_ENABLED | |
| #include "stm32h7xx_hal_comp.h" | |
| #endif /* HAL_COMP_MODULE_ENABLED */ | |
| #ifdef HAL_CRC_MODULE_ENABLED | |
| #include "stm32h7xx_hal_crc.h" | |
| #endif /* HAL_CRC_MODULE_ENABLED */ | |
| #ifdef HAL_CRYP_MODULE_ENABLED | |
| #include "stm32h7xx_hal_cryp.h" | |
| #endif /* HAL_CRYP_MODULE_ENABLED */ | |
| #ifdef HAL_DAC_MODULE_ENABLED | |
| #include "stm32h7xx_hal_dac.h" | |
| #endif /* HAL_DAC_MODULE_ENABLED */ | |
| #ifdef HAL_FLASH_MODULE_ENABLED | |
| #include "stm32h7xx_hal_flash.h" | |
| #endif /* HAL_FLASH_MODULE_ENABLED */ | |
| #ifdef HAL_HRTIM_MODULE_ENABLED | |
| #include "stm32h7xx_hal_hrtim.h" | |
| #endif /* HAL_HRTIM_MODULE_ENABLED */ | |
| #ifdef HAL_HSEM_MODULE_ENABLED | |
| #include "stm32h7xx_hal_hsem.h" | |
| #endif /* HAL_HSEM_MODULE_ENABLED */ | |
| #ifdef HAL_SRAM_MODULE_ENABLED | |
| #include "stm32h7xx_hal_sram.h" | |
| #endif /* HAL_SRAM_MODULE_ENABLED */ | |
| #ifdef HAL_NOR_MODULE_ENABLED | |
| #include "stm32h7xx_hal_nor.h" | |
| #endif /* HAL_NOR_MODULE_ENABLED */ | |
| #ifdef HAL_NAND_MODULE_ENABLED | |
| #include "stm32h7xx_hal_nand.h" | |
| #endif /* HAL_NAND_MODULE_ENABLED */ | |
| #ifdef HAL_I2C_MODULE_ENABLED | |
| #include "stm32h7xx_hal_i2c.h" | |
| #endif /* HAL_I2C_MODULE_ENABLED */ | |
| #ifdef HAL_I2S_MODULE_ENABLED | |
| #include "stm32h7xx_hal_i2s.h" | |
| #endif /* HAL_I2S_MODULE_ENABLED */ | |
| #ifdef HAL_IWDG_MODULE_ENABLED | |
| #include "stm32h7xx_hal_iwdg.h" | |
| #endif /* HAL_IWDG_MODULE_ENABLED */ | |
| #ifdef HAL_JPEG_MODULE_ENABLED | |
| #include "stm32h7xx_hal_jpeg.h" | |
| #endif /* HAL_JPEG_MODULE_ENABLED */ | |
| #ifdef HAL_MDIOS_MODULE_ENABLED | |
| #include "stm32h7xx_hal_mdios.h" | |
| #endif /* HAL_MDIOS_MODULE_ENABLED */ | |
| #ifdef HAL_MMC_MODULE_ENABLED | |
| #include "stm32h7xx_hal_mmc.h" | |
| #endif /* HAL_MMC_MODULE_ENABLED */ | |
| #ifdef HAL_LPTIM_MODULE_ENABLED | |
| #include "stm32h7xx_hal_lptim.h" | |
| #endif /* HAL_LPTIM_MODULE_ENABLED */ | |
| #ifdef HAL_LTDC_MODULE_ENABLED | |
| #include "stm32h7xx_hal_ltdc.h" | |
| #endif /* HAL_LTDC_MODULE_ENABLED */ | |
| #ifdef HAL_OPAMP_MODULE_ENABLED | |
| #include "stm32h7xx_hal_opamp.h" | |
| #endif /* HAL_OPAMP_MODULE_ENABLED */ | |
| #ifdef HAL_PWR_MODULE_ENABLED | |
| #include "stm32h7xx_hal_pwr.h" | |
| #endif /* HAL_PWR_MODULE_ENABLED */ | |
| #ifdef HAL_QSPI_MODULE_ENABLED | |
| #include "stm32h7xx_hal_qspi.h" | |
| #endif /* HAL_QSPI_MODULE_ENABLED */ | |
| #ifdef HAL_RAMECC_MODULE_ENABLED | |
| #include "stm32h7xx_hal_ramecc.h" | |
| #endif /* HAL_HCD_MODULE_ENABLED */ | |
| #ifdef HAL_RNG_MODULE_ENABLED | |
| #include "stm32h7xx_hal_rng.h" | |
| #endif /* HAL_RNG_MODULE_ENABLED */ | |
| #ifdef HAL_RTC_MODULE_ENABLED | |
| #include "stm32h7xx_hal_rtc.h" | |
| #endif /* HAL_RTC_MODULE_ENABLED */ | |
| #ifdef HAL_SAI_MODULE_ENABLED | |
| #include "stm32h7xx_hal_sai.h" | |
| #endif /* HAL_SAI_MODULE_ENABLED */ | |
| #ifdef HAL_SD_MODULE_ENABLED | |
| #include "stm32h7xx_hal_sd.h" | |
| #endif /* HAL_SD_MODULE_ENABLED */ | |
| #ifdef HAL_SDRAM_MODULE_ENABLED | |
| #include "stm32h7xx_hal_sdram.h" | |
| #endif /* HAL_SDRAM_MODULE_ENABLED */ | |
| #ifdef HAL_SPI_MODULE_ENABLED | |
| #include "stm32h7xx_hal_spi.h" | |
| #endif /* HAL_SPI_MODULE_ENABLED */ | |
| #ifdef HAL_SPDIFRX_MODULE_ENABLED | |
| #include "stm32h7xx_hal_spdifrx.h" | |
| #endif /* HAL_SPDIFRX_MODULE_ENABLED */ | |
| #ifdef HAL_SWPMI_MODULE_ENABLED | |
| #include "stm32h7xx_hal_swpmi.h" | |
| #endif /* HAL_SWPMI_MODULE_ENABLED */ | |
| #ifdef HAL_TIM_MODULE_ENABLED | |
| #include "stm32h7xx_hal_tim.h" | |
| #endif /* HAL_TIM_MODULE_ENABLED */ | |
| #ifdef HAL_UART_MODULE_ENABLED | |
| #include "stm32h7xx_hal_uart.h" | |
| #endif /* HAL_UART_MODULE_ENABLED */ | |
| #ifdef HAL_USART_MODULE_ENABLED | |
| #include "stm32h7xx_hal_usart.h" | |
| #endif /* HAL_USART_MODULE_ENABLED */ | |
| #ifdef HAL_IRDA_MODULE_ENABLED | |
| #include "stm32h7xx_hal_irda.h" | |
| #endif /* HAL_IRDA_MODULE_ENABLED */ | |
| #ifdef HAL_SMARTCARD_MODULE_ENABLED | |
| #include "stm32h7xx_hal_smartcard.h" | |
| #endif /* HAL_SMARTCARD_MODULE_ENABLED */ | |
| #ifdef HAL_SMBUS_MODULE_ENABLED | |
| #include "stm32h7xx_hal_smbus.h" | |
| #endif /* HAL_SMBUS_MODULE_ENABLED */ | |
| #ifdef HAL_WWDG_MODULE_ENABLED | |
| #include "stm32h7xx_hal_wwdg.h" | |
| #endif /* HAL_WWDG_MODULE_ENABLED */ | |
| #ifdef HAL_PCD_MODULE_ENABLED | |
| #include "stm32h7xx_hal_pcd.h" | |
| #endif /* HAL_PCD_MODULE_ENABLED */ | |
| #ifdef HAL_HCD_MODULE_ENABLED | |
| #include "stm32h7xx_hal_hcd.h" | |
| #endif /* HAL_HCD_MODULE_ENABLED */ | |
| /* Exported macro ------------------------------------------------------------*/ | |
| #ifdef USE_FULL_ASSERT | |
| /** | |
| * @brief The assert_param macro is used for function's parameters check. | |
| * @param expr: If expr is false, it calls assert_failed function | |
| * which reports the name of the source file and the source | |
| * line number of the call that failed. | |
| * If expr is true, it returns no value. | |
| * @retval None | |
| */ | |
| #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) | |
| /* Exported functions ------------------------------------------------------- */ | |
| void assert_failed(uint8_t *file, uint32_t line); | |
| #else | |
| #define assert_param(expr) ((void)0U) | |
| #endif /* USE_FULL_ASSERT */ | |
| #ifdef __cplusplus | |
| } | |
| #endif | |
| #endif /* __STM32H7xx_HAL_CONF_H */ | |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |