| /** | |
| * \file | |
| * | |
| * Copyright (c) 2015 Atmel Corporation. All rights reserved. | |
| * | |
| * \asf_license_start | |
| * | |
| * \page License | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * | |
| * 1. Redistributions of source code must retain the above copyright notice, | |
| * this list of conditions and the following disclaimer. | |
| * | |
| * 2. Redistributions in binary form must reproduce the above copyright notice, | |
| * this list of conditions and the following disclaimer in the documentation | |
| * and/or other materials provided with the distribution. | |
| * | |
| * 3. The name of Atmel may not be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * 4. This software may only be redistributed and used in connection with an | |
| * Atmel microcontroller product. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED | |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF | |
| * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE | |
| * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR | |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS | |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) | |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, | |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN | |
| * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE | |
| * POSSIBILITY OF SUCH DAMAGE. | |
| * | |
| * \asf_license_stop | |
| * | |
| */ | |
| /* | |
| * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a> | |
| */ | |
| #ifndef _SAME70_UART2_INSTANCE_ | |
| #define _SAME70_UART2_INSTANCE_ | |
| /* ========== Register definition for UART2 peripheral ========== */ | |
| #if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) | |
| #define REG_UART2_CR (0x400E1A00U) /**< \brief (UART2) Control Register */ | |
| #define REG_UART2_MR (0x400E1A04U) /**< \brief (UART2) Mode Register */ | |
| #define REG_UART2_IER (0x400E1A08U) /**< \brief (UART2) Interrupt Enable Register */ | |
| #define REG_UART2_IDR (0x400E1A0CU) /**< \brief (UART2) Interrupt Disable Register */ | |
| #define REG_UART2_IMR (0x400E1A10U) /**< \brief (UART2) Interrupt Mask Register */ | |
| #define REG_UART2_SR (0x400E1A14U) /**< \brief (UART2) Status Register */ | |
| #define REG_UART2_RHR (0x400E1A18U) /**< \brief (UART2) Receive Holding Register */ | |
| #define REG_UART2_THR (0x400E1A1CU) /**< \brief (UART2) Transmit Holding Register */ | |
| #define REG_UART2_BRGR (0x400E1A20U) /**< \brief (UART2) Baud Rate Generator Register */ | |
| #define REG_UART2_CMPR (0x400E1A24U) /**< \brief (UART2) Comparison Register */ | |
| #define REG_UART2_WPMR (0x400E1AE4U) /**< \brief (UART2) Write Protection Mode Register */ | |
| #else | |
| #define REG_UART2_CR (*(__O uint32_t*)0x400E1A00U) /**< \brief (UART2) Control Register */ | |
| #define REG_UART2_MR (*(__IO uint32_t*)0x400E1A04U) /**< \brief (UART2) Mode Register */ | |
| #define REG_UART2_IER (*(__O uint32_t*)0x400E1A08U) /**< \brief (UART2) Interrupt Enable Register */ | |
| #define REG_UART2_IDR (*(__O uint32_t*)0x400E1A0CU) /**< \brief (UART2) Interrupt Disable Register */ | |
| #define REG_UART2_IMR (*(__I uint32_t*)0x400E1A10U) /**< \brief (UART2) Interrupt Mask Register */ | |
| #define REG_UART2_SR (*(__I uint32_t*)0x400E1A14U) /**< \brief (UART2) Status Register */ | |
| #define REG_UART2_RHR (*(__I uint32_t*)0x400E1A18U) /**< \brief (UART2) Receive Holding Register */ | |
| #define REG_UART2_THR (*(__O uint32_t*)0x400E1A1CU) /**< \brief (UART2) Transmit Holding Register */ | |
| #define REG_UART2_BRGR (*(__IO uint32_t*)0x400E1A20U) /**< \brief (UART2) Baud Rate Generator Register */ | |
| #define REG_UART2_CMPR (*(__IO uint32_t*)0x400E1A24U) /**< \brief (UART2) Comparison Register */ | |
| #define REG_UART2_WPMR (*(__IO uint32_t*)0x400E1AE4U) /**< \brief (UART2) Write Protection Mode Register */ | |
| #endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ | |
| #endif /* _SAME70_UART2_INSTANCE_ */ |