| /** | |
| ****************************************************************************** | |
| * @file stm32l1xx_hal_tim_ex.h | |
| * @author MCD Application Team | |
| * @brief Header file of TIM HAL Extended module. | |
| ****************************************************************************** | |
| * @attention | |
| * | |
| * <h2><center>© Copyright (c) 2016 STMicroelectronics. | |
| * All rights reserved.</center></h2> | |
| * | |
| * This software component is licensed by ST under BSD 3-Clause license, | |
| * the "License"; You may not use this file except in compliance with the | |
| * License. You may obtain a copy of the License at: | |
| * opensource.org/licenses/BSD-3-Clause | |
| * | |
| ****************************************************************************** | |
| */ | |
| /* Define to prevent recursive inclusion -------------------------------------*/ | |
| #ifndef STM32L1xx_HAL_TIM_EX_H | |
| #define STM32L1xx_HAL_TIM_EX_H | |
| #ifdef __cplusplus | |
| extern "C" { | |
| #endif | |
| /* Includes ------------------------------------------------------------------*/ | |
| #include "stm32l1xx_hal_def.h" | |
| /** @addtogroup STM32L1xx_HAL_Driver | |
| * @{ | |
| */ | |
| /** @addtogroup TIMEx | |
| * @{ | |
| */ | |
| /* Exported types ------------------------------------------------------------*/ | |
| /** @defgroup TIMEx_Exported_Types TIM Extended Exported Types | |
| * @{ | |
| */ | |
| /** | |
| * @} | |
| */ | |
| /* End of exported types -----------------------------------------------------*/ | |
| /* Exported constants --------------------------------------------------------*/ | |
| /** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants | |
| * @{ | |
| */ | |
| /** @defgroup TIMEx_Remap TIM Extended Remapping | |
| * @{ | |
| */ | |
| /* @note STM32L1XX devices are organized in 6 categories: Cat.1, Cat.2, Cat.3, Cat.4, Cat.5, Cat.6. | |
| Remap capabilities depend on the device category. As the DMA2 controller is available only in | |
| Cat.3, Cat.4,Cat.5 and Cat.6 devices it is used to discriminate Cat.1 and Cat.2 devices v.s. | |
| Cat.3, Cat.4, Cat.5 and Cat.6 devices. */ | |
| #if defined(DMA2) | |
| #define TIM_TIM2_ITR1_TIM10_OC (0x00000000) /*!< TIM2 ITR1 input is connected to TIM10 OC */ | |
| #define TIM_TIM2_ITR1_TIM5_TGO TIM2_OR_ITR1_RMP /*!< TIM2 ITR1 input is connected to TIM5 TGO */ | |
| #endif /* DMA2 */ | |
| #if defined(DMA2) | |
| #define TIM_TIM3_ITR2_TIM11_OC (0x00000000) /*!< TIM3 ITR2 input is connected to TIM11 OC */ | |
| #define TIM_TIM3_ITR2_TIM5_TGO TIM2_OR_ITR1_RMP /*!< TIM3 ITR2 input is connected to TIM5 TGO */ | |
| #endif /* DMA2 */ | |
| #if defined(DMA2) | |
| #define TIM_TIM9_ITR1_TIM3_TGO (0x00000000) /*!< TIM9 ITR1 input is connected to TIM3 TGO */ | |
| #define TIM_TIM9_ITR1_TS TIM9_OR_ITR1_RMP /*!< TIM9 ITR1 input is connected to touch sensing I/O */ | |
| #endif /* DMA2 */ | |
| #define TIM_TIM9_GPIO (0x00000000) /*!< TIM9 Channel1 is connected to GPIO */ | |
| #define TIM_TIM9_LSE TIM_OR_TI1RMP_0 /*!< TIM9 Channel1 is connected to LSE internal clock */ | |
| #define TIM_TIM9_GPIO1 TIM_OR_TI1RMP_1 /*!< TIM9 Channel1 is connected to GPIO */ | |
| #define TIM_TIM9_GPIO2 TIM_OR_TI1RMP /*!< TIM9 Channel1 is connected to GPIO */ | |
| #if defined(DMA2) | |
| #define TIM_TIM10_TI1RMP (0x00000000) /*!< TIM10 Channel 1 depends on TI1_RMP */ | |
| #define TIM_TIM10_RI TIM_OR_TI1_RMP_RI /*!< TIM10 Channel 1 is connected to RI */ | |
| #define TIM_TIM10_ETR_LSE (0x00000000) /*!< TIM10 ETR input is connected to LSE clock */ | |
| #define TIM_TIM10_ETR_TIM9_TGO TIM_OR_ETR_RMP /*!< TIM10 ETR input is connected to TIM9 TGO */ | |
| #endif /* DMA2 */ | |
| #define TIM_TIM10_GPIO (0x00000000) /*!< TIM10 Channel1 is connected to GPIO */ | |
| #define TIM_TIM10_LSI TIM_OR_TI1RMP_0 /*!< TIM10 Channel1 is connected to LSI internal clock */ | |
| #define TIM_TIM10_LSE TIM_OR_TI1RMP_1 /*!< TIM10 Channel1 is connected to LSE internal clock */ | |
| #define TIM_TIM10_RTC TIM_OR_TI1RMP /*!< TIM10 Channel1 is connected to RTC wakeup interrupt */ | |
| #if defined(DMA2) | |
| #define TIM_TIM11_TI1RMP (0x00000000) /*!< TIM11 Channel 1 depends on TI1_RMP */ | |
| #define TIM_TIM11_RI TIM_OR_TI1_RMP_RI /*!< TIM11 Channel 1 is connected to RI */ | |
| #define TIM_TIM11_ETR_LSE (0x00000000) /*!< TIM11 ETR input is connected to LSE clock */ | |
| #define TIM_TIM11_ETR_TIM9_TGO TIM_OR_ETR_RMP /*!< TIM11 ETR input is connected to TIM9 TGO */ | |
| #endif /* DMA2 */ | |
| #define TIM_TIM11_GPIO (0x00000000) /*!< TIM11 Channel1 is connected to GPIO */ | |
| #define TIM_TIM11_MSI TIM_OR_TI1RMP_0 /*!< TIM11 Channel1 is connected to MSI internal clock */ | |
| #define TIM_TIM11_HSE_RTC TIM_OR_TI1RMP_1 /*!< TIM11 Channel1 is connected to HSE_RTC clock */ | |
| #define TIM_TIM11_GPIO1 TIM_OR_TI1RMP /*!< TIM11 Channel1 is connected to GPIO */ | |
| /** | |
| * @} | |
| */ | |
| /** | |
| * @} | |
| */ | |
| /* End of exported constants -------------------------------------------------*/ | |
| /* Exported macro ------------------------------------------------------------*/ | |
| /** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros | |
| * @{ | |
| */ | |
| /** | |
| * @} | |
| */ | |
| /* End of exported macro -----------------------------------------------------*/ | |
| /* Private macro -------------------------------------------------------------*/ | |
| /** @defgroup TIMEx_Private_Macros TIM Extended Private Macros | |
| * @{ | |
| */ | |
| #if defined(DMA2) | |
| #define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ | |
| ( (((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_ITR1_TIM10_OC) || ((TIM_REMAP) == TIM_TIM2_ITR1_TIM5_TGO))) || \ | |
| (((INSTANCE) == TIM3) && (((TIM_REMAP) == TIM_TIM3_ITR2_TIM11_OC) || ((TIM_REMAP) == TIM_TIM3_ITR2_TIM5_TGO))) || \ | |
| (((INSTANCE) == TIM9) && ((TIM_REMAP) <= (TIM_TIM9_ITR1_TS | TIM_TIM9_GPIO2))) || \ | |
| (((INSTANCE) == TIM10) && ((TIM_REMAP) <= (TIM_TIM10_RI | TIM_TIM10_ETR_TIM9_TGO | TIM_TIM10_RTC))) || \ | |
| (((INSTANCE) == TIM11) && ((TIM_REMAP) <= (TIM_TIM11_RI | TIM_TIM11_ETR_TIM9_TGO | TIM_TIM11_GPIO1))) \ | |
| ) | |
| #else | |
| #define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ | |
| ( (((INSTANCE) == TIM9) && (((TIM_REMAP) == TIM_TIM9_GPIO) || ((TIM_REMAP) == TIM_TIM9_LSE) || ((TIM_REMAP) == TIM_TIM9_GPIO1) || ((TIM_REMAP) == TIM_TIM9_GPIO2))) || \ | |
| (((INSTANCE) == TIM10) && (((TIM_REMAP) == TIM_TIM10_GPIO) || ((TIM_REMAP) == TIM_TIM10_LSI) || ((TIM_REMAP) == TIM_TIM10_LSE) || ((TIM_REMAP) == TIM_TIM10_RTC))) || \ | |
| (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || ((TIM_REMAP) == TIM_TIM11_MSI) || ((TIM_REMAP) == TIM_TIM11_HSE_RTC) || ((TIM_REMAP) == TIM_TIM11_GPIO1))) \ | |
| ) | |
| #endif /* DMA2 */ | |
| /** | |
| * @} | |
| */ | |
| /* End of private macro ------------------------------------------------------*/ | |
| /* Exported functions --------------------------------------------------------*/ | |
| /** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions | |
| * @{ | |
| */ | |
| /** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions | |
| * @brief Peripheral Control functions | |
| * @{ | |
| */ | |
| /* Extended Control functions ************************************************/ | |
| HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef *sMasterConfig); | |
| HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); | |
| /** | |
| * @} | |
| */ | |
| /** | |
| * @} | |
| */ | |
| /* End of exported functions -------------------------------------------------*/ | |
| /** | |
| * @} | |
| */ | |
| /** | |
| * @} | |
| */ | |
| #ifdef __cplusplus | |
| } | |
| #endif | |
| #endif /* STM32L1xx_HAL_TIM_EX_H */ | |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |