| /* --COPYRIGHT--,BSD | |
| * Copyright (c) 2014, Texas Instruments Incorporated | |
| * All rights reserved. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * | |
| * * Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * | |
| * * Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * | |
| * * Neither the name of Texas Instruments Incorporated nor the names of | |
| * its contributors may be used to endorse or promote products derived | |
| * from this software without specific prior written permission. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, | |
| * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR | |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR | |
| * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, | |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, | |
| * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; | |
| * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, | |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR | |
| * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, | |
| * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| * --/COPYRIGHT--*/ | |
| //***************************************************************************** | |
| // | |
| // lcd_c.h - Driver for the LCD_C Module. | |
| // | |
| //***************************************************************************** | |
| #ifndef __MSP430WARE_LCD_C_H__ | |
| #define __MSP430WARE_LCD_C_H__ | |
| #include "inc/hw_memmap.h" | |
| #ifdef __MSP430_HAS_LCD_C__ | |
| //***************************************************************************** | |
| // | |
| // If building with a C++ compiler, make all of the definitions in this header | |
| // have a C binding. | |
| // | |
| //***************************************************************************** | |
| #ifdef __cplusplus | |
| extern "C" | |
| { | |
| #endif | |
| #include "inc/hw_regaccess.h" | |
| //***************************************************************************** | |
| // | |
| //! \brief Used in the LCD_C_init() function as the initParams parameter. | |
| // | |
| //***************************************************************************** | |
| typedef struct LCD_C_initParam | |
| { | |
| //! Selects the clock that will be used by the LCD. | |
| //! \n Valid values are: | |
| //! - \b LCD_C_CLOCKSOURCE_ACLK [Default] | |
| //! - \b LCD_C_CLOCKSOURCE_VLOCLK | |
| uint16_t clockSource; | |
| //! Selects the divider for LCD_frequency. | |
| //! \n Valid values are: | |
| //! - \b LCD_C_CLOCKDIVIDER_1 [Default] | |
| //! - \b LCD_C_CLOCKDIVIDER_2 | |
| //! - \b LCD_C_CLOCKDIVIDER_3 | |
| //! - \b LCD_C_CLOCKDIVIDER_4 | |
| //! - \b LCD_C_CLOCKDIVIDER_5 | |
| //! - \b LCD_C_CLOCKDIVIDER_6 | |
| //! - \b LCD_C_CLOCKDIVIDER_7 | |
| //! - \b LCD_C_CLOCKDIVIDER_8 | |
| //! - \b LCD_C_CLOCKDIVIDER_9 | |
| //! - \b LCD_C_CLOCKDIVIDER_10 | |
| //! - \b LCD_C_CLOCKDIVIDER_11 | |
| //! - \b LCD_C_CLOCKDIVIDER_12 | |
| //! - \b LCD_C_CLOCKDIVIDER_13 | |
| //! - \b LCD_C_CLOCKDIVIDER_14 | |
| //! - \b LCD_C_CLOCKDIVIDER_15 | |
| //! - \b LCD_C_CLOCKDIVIDER_16 | |
| //! - \b LCD_C_CLOCKDIVIDER_17 | |
| //! - \b LCD_C_CLOCKDIVIDER_18 | |
| //! - \b LCD_C_CLOCKDIVIDER_19 | |
| //! - \b LCD_C_CLOCKDIVIDER_20 | |
| //! - \b LCD_C_CLOCKDIVIDER_21 | |
| //! - \b LCD_C_CLOCKDIVIDER_22 | |
| //! - \b LCD_C_CLOCKDIVIDER_23 | |
| //! - \b LCD_C_CLOCKDIVIDER_24 | |
| //! - \b LCD_C_CLOCKDIVIDER_25 | |
| //! - \b LCD_C_CLOCKDIVIDER_26 | |
| //! - \b LCD_C_CLOCKDIVIDER_27 | |
| //! - \b LCD_C_CLOCKDIVIDER_28 | |
| //! - \b LCD_C_CLOCKDIVIDER_29 | |
| //! - \b LCD_C_CLOCKDIVIDER_30 | |
| //! - \b LCD_C_CLOCKDIVIDER_31 | |
| //! - \b LCD_C_CLOCKDIVIDER_32 | |
| uint16_t clockDivider; | |
| //! Selects the prescalar for frequency. | |
| //! \n Valid values are: | |
| //! - \b LCD_C_CLOCKPRESCALAR_1 [Default] | |
| //! - \b LCD_C_CLOCKPRESCALAR_2 | |
| //! - \b LCD_C_CLOCKPRESCALAR_4 | |
| //! - \b LCD_C_CLOCKPRESCALAR_8 | |
| //! - \b LCD_C_CLOCKPRESCALAR_16 | |
| //! - \b LCD_C_CLOCKPRESCALAR_32 | |
| uint16_t clockPrescalar; | |
| //! Selects LCD mux rate. | |
| //! \n Valid values are: | |
| //! - \b LCD_C_STATIC [Default] | |
| //! - \b LCD_C_2_MUX | |
| //! - \b LCD_C_3_MUX | |
| //! - \b LCD_C_4_MUX | |
| //! - \b LCD_C_5_MUX | |
| //! - \b LCD_C_6_MUX | |
| //! - \b LCD_C_7_MUX | |
| //! - \b LCD_C_8_MUX | |
| uint16_t muxRate; | |
| //! Selects LCD waveform mode. | |
| //! \n Valid values are: | |
| //! - \b LCD_C_STANDARD_WAVEFORMS [Default] | |
| //! - \b LCD_C_LOW_POWER_WAVEFORMS | |
| uint16_t waveforms; | |
| //! Sets LCD segment on/off. | |
| //! \n Valid values are: | |
| //! - \b LCD_C_SEGMENTS_DISABLED [Default] | |
| //! - \b LCD_C_SEGMENTS_ENABLED | |
| uint16_t segments; | |
| } LCD_C_initParam; | |
| extern const LCD_C_initParam LCD_C_INIT_PARAM; | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the initParams parameter for | |
| // functions: LCD_C_init(). | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_CLOCKSOURCE_ACLK (0x0) | |
| #define LCD_C_CLOCKSOURCE_VLOCLK (LCDSSEL) | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the initParams parameter for | |
| // functions: LCD_C_init(). | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_CLOCKDIVIDER_1 (LCDDIV_0) | |
| #define LCD_C_CLOCKDIVIDER_2 (LCDDIV_1) | |
| #define LCD_C_CLOCKDIVIDER_3 (LCDDIV_2) | |
| #define LCD_C_CLOCKDIVIDER_4 (LCDDIV_3) | |
| #define LCD_C_CLOCKDIVIDER_5 (LCDDIV_4) | |
| #define LCD_C_CLOCKDIVIDER_6 (LCDDIV_5) | |
| #define LCD_C_CLOCKDIVIDER_7 (LCDDIV_6) | |
| #define LCD_C_CLOCKDIVIDER_8 (LCDDIV_7) | |
| #define LCD_C_CLOCKDIVIDER_9 (LCDDIV_8) | |
| #define LCD_C_CLOCKDIVIDER_10 (LCDDIV_9) | |
| #define LCD_C_CLOCKDIVIDER_11 (LCDDIV_10) | |
| #define LCD_C_CLOCKDIVIDER_12 (LCDDIV_11) | |
| #define LCD_C_CLOCKDIVIDER_13 (LCDDIV_12) | |
| #define LCD_C_CLOCKDIVIDER_14 (LCDDIV_13) | |
| #define LCD_C_CLOCKDIVIDER_15 (LCDDIV_14) | |
| #define LCD_C_CLOCKDIVIDER_16 (LCDDIV_15) | |
| #define LCD_C_CLOCKDIVIDER_17 (LCDDIV_16) | |
| #define LCD_C_CLOCKDIVIDER_18 (LCDDIV_17) | |
| #define LCD_C_CLOCKDIVIDER_19 (LCDDIV_18) | |
| #define LCD_C_CLOCKDIVIDER_20 (LCDDIV_19) | |
| #define LCD_C_CLOCKDIVIDER_21 (LCDDIV_20) | |
| #define LCD_C_CLOCKDIVIDER_22 (LCDDIV_21) | |
| #define LCD_C_CLOCKDIVIDER_23 (LCDDIV_22) | |
| #define LCD_C_CLOCKDIVIDER_24 (LCDDIV_23) | |
| #define LCD_C_CLOCKDIVIDER_25 (LCDDIV_24) | |
| #define LCD_C_CLOCKDIVIDER_26 (LCDDIV_25) | |
| #define LCD_C_CLOCKDIVIDER_27 (LCDDIV_26) | |
| #define LCD_C_CLOCKDIVIDER_28 (LCDDIV_27) | |
| #define LCD_C_CLOCKDIVIDER_29 (LCDDIV_28) | |
| #define LCD_C_CLOCKDIVIDER_30 (LCDDIV_29) | |
| #define LCD_C_CLOCKDIVIDER_31 (LCDDIV_30) | |
| #define LCD_C_CLOCKDIVIDER_32 (LCDDIV_31) | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the initParams parameter for | |
| // functions: LCD_C_init(). | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_CLOCKPRESCALAR_1 (LCDPRE_0) | |
| #define LCD_C_CLOCKPRESCALAR_2 (LCDPRE_1) | |
| #define LCD_C_CLOCKPRESCALAR_4 (LCDPRE_2) | |
| #define LCD_C_CLOCKPRESCALAR_8 (LCDPRE_3) | |
| #define LCD_C_CLOCKPRESCALAR_16 (LCDPRE_4) | |
| #define LCD_C_CLOCKPRESCALAR_32 (LCDPRE_5) | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the initParams parameter for | |
| // functions: LCD_C_init(). | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_STATIC (0x0) | |
| #define LCD_C_2_MUX (LCDMX0) | |
| #define LCD_C_3_MUX (LCDMX1) | |
| #define LCD_C_4_MUX (LCDMX1 | LCDMX0) | |
| #define LCD_C_5_MUX (LCDMX2) | |
| #define LCD_C_6_MUX (LCDMX2 | LCDMX0) | |
| #define LCD_C_7_MUX (LCDMX2 | LCDMX1) | |
| #define LCD_C_8_MUX (LCDMX2 | LCDMX1 | LCDMX0) | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the initParams parameter for | |
| // functions: LCD_C_init(). | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_STANDARD_WAVEFORMS (0x0) | |
| #define LCD_C_LOW_POWER_WAVEFORMS (LCDLP) | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the initParams parameter for | |
| // functions: LCD_C_init(). | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_SEGMENTS_DISABLED (0x0) | |
| #define LCD_C_SEGMENTS_ENABLED (LCDSON) | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the mask parameter for | |
| // functions: LCD_C_clearInterrupt(), LCD_C_getInterruptStatus(), | |
| // LCD_C_enableInterrupt(), and LCD_C_disableInterrupt() as well as returned by | |
| // the LCD_C_getInterruptStatus() function. | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_NO_CAPACITANCE_CONNECTED_INTERRUPT (LCDNOCAPIE) | |
| #define LCD_C_BLINKING_SEGMENTS_ON_INTERRUPT (LCDBLKONIE) | |
| #define LCD_C_BLINKING_SEGMENTS_OFF_INTERRUPT (LCDBLKOFFIE) | |
| #define LCD_C_FRAME_INTERRUPT (LCDFRMIE) | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the displayMemory parameter | |
| // for functions: LCD_C_selectDisplayMemory(). | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_DISPLAYSOURCE_MEMORY (0x0) | |
| #define LCD_C_DISPLAYSOURCE_BLINKINGMEMORY (LCDDISP) | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the clockDivider parameter | |
| // for functions: LCD_C_setBlinkingControl(). | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_BLINK_FREQ_CLOCK_DIVIDER_1 (0x0) | |
| #define LCD_C_BLINK_FREQ_CLOCK_DIVIDER_2 (LCDBLKDIV0) | |
| #define LCD_C_BLINK_FREQ_CLOCK_DIVIDER_3 (LCDBLKDIV1) | |
| #define LCD_C_BLINK_FREQ_CLOCK_DIVIDER_4 (LCDBLKDIV0 | LCDBLKDIV1) | |
| #define LCD_C_BLINK_FREQ_CLOCK_DIVIDER_5 (LCDBLKDIV2) | |
| #define LCD_C_BLINK_FREQ_CLOCK_DIVIDER_6 (LCDBLKDIV2 | LCDBLKDIV0) | |
| #define LCD_C_BLINK_FREQ_CLOCK_DIVIDER_7 (LCDBLKDIV2 | LCDBLKDIV1) | |
| #define LCD_C_BLINK_FREQ_CLOCK_DIVIDER_8 (LCDBLKDIV2 | LCDBLKDIV1 | LCDBLKDIV0) | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the clockPrescalar parameter | |
| // for functions: LCD_C_setBlinkingControl(). | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_512 (0x0) | |
| #define LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_1024 (LCDBLKPRE0) | |
| #define LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_2048 (LCDBLKPRE1) | |
| #define LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_4096 (LCDBLKPRE1 | LCDBLKPRE0) | |
| #define LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_8162 (LCDBLKPRE2) | |
| #define LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_16384 (LCDBLKPRE2 | LCDBLKPRE0) | |
| #define LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_32768 (LCDBLKPRE2 | LCDBLKPRE1) | |
| #define LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_65536 \ | |
| (LCDBLKPRE2 | LCDBLKPRE1 | LCDBLKPRE0) | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the blinkingMode parameter | |
| // for functions: LCD_C_setBlinkingControl(). | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_BLINK_MODE_DISABLED (LCDBLKMOD_0) | |
| #define LCD_C_BLINK_MODE_INDIVIDUAL_SEGMENTS (LCDBLKMOD_1) | |
| #define LCD_C_BLINK_MODE_ALL_SEGMENTS (LCDBLKMOD_2) | |
| #define LCD_C_BLINK_MODE_SWITCHING_BETWEEN_DISPLAY_CONTENTS (LCDBLKMOD_3) | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the bias parameter for | |
| // functions: LCD_C_selectBias(). | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_BIAS_1_3 (0x0) | |
| #define LCD_C_BIAS_1_2 (LCD2B) | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the reference parameter for | |
| // functions: LCD_C_selectChargePumpReference(). | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_INTERNAL_REFERENCE_VOLTAGE (VLCDREF_0) | |
| #define LCD_C_EXTERNAL_REFERENCE_VOLTAGE (VLCDREF_1) | |
| #define LCD_C_INTERNAL_REFERENCE_VOLTAGE_SWITCHED_TO_EXTERNAL_PIN (VLCDREF_2) | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the vlcdSource parameter for | |
| // functions: LCD_C_setVLCDSource(). | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_VLCD_GENERATED_INTERNALLY (0x0) | |
| #define LCD_C_VLCD_SOURCED_EXTERNALLY (VLCDEXT) | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the v2v3v4Source parameter | |
| // for functions: LCD_C_setVLCDSource(). | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_V2V3V4_GENERATED_INTERNALLY_NOT_SWITCHED_TO_PINS (0x0) | |
| #define LCD_C_V2V3V4_GENERATED_INTERNALLY_SWITCHED_TO_PINS (LCDREXT) | |
| #define LCD_C_V2V3V4_SOURCED_EXTERNALLY (LCDEXTBIAS) | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the v5Source parameter for | |
| // functions: LCD_C_setVLCDSource(). | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_V5_VSS (0x0) | |
| #define LCD_C_V5_SOURCED_FROM_R03 (R03EXT) | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the voltage parameter for | |
| // functions: LCD_C_setVLCDVoltage(). | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_CHARGEPUMP_DISABLED (0x0) | |
| #define LCD_C_CHARGEPUMP_VOLTAGE_2_60V_OR_2_17VREF (VLCD0) | |
| #define LCD_C_CHARGEPUMP_VOLTAGE_2_66V_OR_2_22VREF (VLCD1) | |
| #define LCD_C_CHARGEPUMP_VOLTAGE_2_72V_OR_2_27VREF (VLCD1 | VLCD0) | |
| #define LCD_C_CHARGEPUMP_VOLTAGE_2_78V_OR_2_32VREF (VLCD2) | |
| #define LCD_C_CHARGEPUMP_VOLTAGE_2_84V_OR_2_37VREF (VLCD2 | VLCD0) | |
| #define LCD_C_CHARGEPUMP_VOLTAGE_2_90V_OR_2_42VREF (VLCD2 | VLCD1) | |
| #define LCD_C_CHARGEPUMP_VOLTAGE_2_96V_OR_2_47VREF (VLCD2 | VLCD1 | VLCD0) | |
| #define LCD_C_CHARGEPUMP_VOLTAGE_3_02V_OR_2_52VREF (VLCD3) | |
| #define LCD_C_CHARGEPUMP_VOLTAGE_3_08V_OR_2_57VREF (VLCD3 | VLCD0) | |
| #define LCD_C_CHARGEPUMP_VOLTAGE_3_14V_OR_2_62VREF (VLCD3 | VLCD1) | |
| #define LCD_C_CHARGEPUMP_VOLTAGE_3_20V_OR_2_67VREF (VLCD3 | VLCD1 | VLCD0) | |
| #define LCD_C_CHARGEPUMP_VOLTAGE_3_26V_OR_2_72VREF (VLCD3 | VLCD2) | |
| #define LCD_C_CHARGEPUMP_VOLTAGE_3_32V_OR_2_77VREF (VLCD3 | VLCD2 | VLCD0) | |
| #define LCD_C_CHARGEPUMP_VOLTAGE_3_38V_OR_2_82VREF (VLCD3 | VLCD2 | VLCD1) | |
| #define LCD_C_CHARGEPUMP_VOLTAGE_3_44V_OR_2_87VREF \ | |
| (VLCD3 | VLCD2 | VLCD1 | VLCD0) | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the startPin parameter for | |
| // functions: LCD_C_setPinAsLCDFunctionEx(); the endPin parameter for | |
| // functions: LCD_C_setPinAsLCDFunctionEx(); the pin parameter for functions: | |
| // LCD_C_setPinAsLCDFunction(), LCD_C_setPinAsPortFunction(), | |
| // LCD_C_setMemory(), and LCD_C_setBlinkingMemory(). | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_SEGMENT_LINE_0 (0) | |
| #define LCD_C_SEGMENT_LINE_1 (1) | |
| #define LCD_C_SEGMENT_LINE_2 (2) | |
| #define LCD_C_SEGMENT_LINE_3 (3) | |
| #define LCD_C_SEGMENT_LINE_4 (4) | |
| #define LCD_C_SEGMENT_LINE_5 (5) | |
| #define LCD_C_SEGMENT_LINE_6 (6) | |
| #define LCD_C_SEGMENT_LINE_7 (7) | |
| #define LCD_C_SEGMENT_LINE_8 (8) | |
| #define LCD_C_SEGMENT_LINE_9 (9) | |
| #define LCD_C_SEGMENT_LINE_10 (10) | |
| #define LCD_C_SEGMENT_LINE_11 (11) | |
| #define LCD_C_SEGMENT_LINE_12 (12) | |
| #define LCD_C_SEGMENT_LINE_13 (13) | |
| #define LCD_C_SEGMENT_LINE_14 (14) | |
| #define LCD_C_SEGMENT_LINE_15 (15) | |
| #define LCD_C_SEGMENT_LINE_16 (16) | |
| #define LCD_C_SEGMENT_LINE_17 (17) | |
| #define LCD_C_SEGMENT_LINE_18 (18) | |
| #define LCD_C_SEGMENT_LINE_19 (19) | |
| #define LCD_C_SEGMENT_LINE_20 (20) | |
| #define LCD_C_SEGMENT_LINE_21 (21) | |
| #define LCD_C_SEGMENT_LINE_22 (22) | |
| #define LCD_C_SEGMENT_LINE_23 (23) | |
| #define LCD_C_SEGMENT_LINE_24 (24) | |
| #define LCD_C_SEGMENT_LINE_25 (25) | |
| #define LCD_C_SEGMENT_LINE_26 (26) | |
| #define LCD_C_SEGMENT_LINE_27 (27) | |
| #define LCD_C_SEGMENT_LINE_28 (28) | |
| #define LCD_C_SEGMENT_LINE_29 (29) | |
| #define LCD_C_SEGMENT_LINE_30 (30) | |
| #define LCD_C_SEGMENT_LINE_31 (31) | |
| #define LCD_C_SEGMENT_LINE_32 (32) | |
| #define LCD_C_SEGMENT_LINE_33 (33) | |
| #define LCD_C_SEGMENT_LINE_34 (34) | |
| #define LCD_C_SEGMENT_LINE_35 (35) | |
| #define LCD_C_SEGMENT_LINE_36 (36) | |
| #define LCD_C_SEGMENT_LINE_37 (37) | |
| #define LCD_C_SEGMENT_LINE_38 (38) | |
| #define LCD_C_SEGMENT_LINE_39 (39) | |
| #define LCD_C_SEGMENT_LINE_40 (40) | |
| #define LCD_C_SEGMENT_LINE_41 (41) | |
| #define LCD_C_SEGMENT_LINE_42 (42) | |
| #define LCD_C_SEGMENT_LINE_43 (43) | |
| #define LCD_C_SEGMENT_LINE_44 (44) | |
| #define LCD_C_SEGMENT_LINE_45 (45) | |
| #define LCD_C_SEGMENT_LINE_46 (46) | |
| #define LCD_C_SEGMENT_LINE_47 (47) | |
| #define LCD_C_SEGMENT_LINE_48 (48) | |
| #define LCD_C_SEGMENT_LINE_49 (49) | |
| #define LCD_C_SEGMENT_LINE_50 (50) | |
| #define LCD_C_SEGMENT_LINE_51 (51) | |
| #define LCD_C_SEGMENT_LINE_52 (52) | |
| #define LCD_C_SEGMENT_LINE_53 (53) | |
| #define LCD_C_SEGMENT_LINE_54 (54) | |
| #define LCD_C_SEGMENT_LINE_55 (55) | |
| #define LCD_C_SEGMENT_LINE_56 (56) | |
| #define LCD_C_SEGMENT_LINE_57 (57) | |
| #define LCD_C_SEGMENT_LINE_58 (58) | |
| #define LCD_C_SEGMENT_LINE_59 (59) | |
| #define LCD_C_SEGMENT_LINE_60 (60) | |
| #define LCD_C_SEGMENT_LINE_61 (61) | |
| #define LCD_C_SEGMENT_LINE_62 (62) | |
| #define LCD_C_SEGMENT_LINE_63 (63) | |
| //***************************************************************************** | |
| // | |
| // The following are values that can be passed to the syncToClock parameter for | |
| // functions: LCD_C_configChargePump(). | |
| // | |
| //***************************************************************************** | |
| #define LCD_C_SYNCHRONIZATION_DISABLED (0x0) | |
| #define LCD_C_SYNCHRONIZATION_ENABLED (LCDCPCLKSYNC) | |
| //***************************************************************************** | |
| // | |
| // Prototypes for the APIs. | |
| // | |
| //***************************************************************************** | |
| //***************************************************************************** | |
| // | |
| //! \brief Initializes the LCD Module. | |
| //! | |
| //! his function initializes the LCD but without turning on. It bascially setup | |
| //! the clock source, clock divider, clock prescalar, mux rate, low-power | |
| //! waveform and segments on/off. After calling this function, user can config | |
| //! charge pump, internal reference voltage and voltage sources. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! \param initParams is the pointer to LCD_InitParam structure. See the | |
| //! following parameters for each field. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_init(uint16_t baseAddress, | |
| LCD_C_initParam *initParams); | |
| //***************************************************************************** | |
| // | |
| //! \brief Turns on the LCD module. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! | |
| //! Modified bits are \b LCDON of \b LCDCTL0 register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_on(uint16_t baseAddress); | |
| //***************************************************************************** | |
| // | |
| //! \brief Turns off the LCD module. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! | |
| //! Modified bits are \b LCDON of \b LCDCTL0 register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_off(uint16_t baseAddress); | |
| //***************************************************************************** | |
| // | |
| //! \brief Clears the LCD interrupt flags. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! \param mask is the masked interrupt flag to be cleared. | |
| //! Valid values are: | |
| //! - \b LCD_C_NO_CAPACITANCE_CONNECTED_INTERRUPT | |
| //! - \b LCD_C_BLINKING_SEGMENTS_ON_INTERRUPT | |
| //! - \b LCD_C_BLINKING_SEGMENTS_OFF_INTERRUPT | |
| //! - \b LCD_C_FRAME_INTERRUPT | |
| //! \n Modified bits are \b LCDCAPIFG, \b LCDBLKONIFG, \b LCDBLKOFFIFG | |
| //! and \b LCDFRMIFG of \b LCDCTL1 register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_clearInterrupt(uint16_t baseAddress, | |
| uint16_t mask); | |
| //***************************************************************************** | |
| // | |
| //! \brief Gets the LCD interrupt status. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! \param mask is the masked interrupt flags. | |
| //! Valid values are: | |
| //! - \b LCD_C_NO_CAPACITANCE_CONNECTED_INTERRUPT | |
| //! - \b LCD_C_BLINKING_SEGMENTS_ON_INTERRUPT | |
| //! - \b LCD_C_BLINKING_SEGMENTS_OFF_INTERRUPT | |
| //! - \b LCD_C_FRAME_INTERRUPT | |
| //! | |
| //! \return None | |
| //! Return Logical OR of any of the following: | |
| //! - \b LCD_C_NO_CAPACITANCE_CONNECTED_INTERRUPT | |
| //! - \b LCD_C_BLINKING_SEGMENTS_ON_INTERRUPT | |
| //! - \b LCD_C_BLINKING_SEGMENTS_OFF_INTERRUPT | |
| //! - \b LCD_C_FRAME_INTERRUPT | |
| //! \n indicating the status of the masked interrupts | |
| // | |
| //***************************************************************************** | |
| extern uint16_t LCD_C_getInterruptStatus(uint16_t baseAddress, | |
| uint16_t mask); | |
| //***************************************************************************** | |
| // | |
| //! \brief Enables LCD interrupt sources. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! \param mask is the interrupts to be enabled. | |
| //! Valid values are: | |
| //! - \b LCD_C_NO_CAPACITANCE_CONNECTED_INTERRUPT | |
| //! - \b LCD_C_BLINKING_SEGMENTS_ON_INTERRUPT | |
| //! - \b LCD_C_BLINKING_SEGMENTS_OFF_INTERRUPT | |
| //! - \b LCD_C_FRAME_INTERRUPT | |
| //! \n Modified bits are \b LCDCAPIE, \b LCDBLKONIE, \b LCDBLKOFFIE and | |
| //! \b LCDFRMIE of \b LCDCTL1 register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_enableInterrupt(uint16_t baseAddress, | |
| uint16_t mask); | |
| //***************************************************************************** | |
| // | |
| //! \brief Disables LCD interrupt sources. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! \param mask is the interrupts to be disabled. | |
| //! Valid values are: | |
| //! - \b LCD_C_NO_CAPACITANCE_CONNECTED_INTERRUPT | |
| //! - \b LCD_C_BLINKING_SEGMENTS_ON_INTERRUPT | |
| //! - \b LCD_C_BLINKING_SEGMENTS_OFF_INTERRUPT | |
| //! - \b LCD_C_FRAME_INTERRUPT | |
| //! \n Modified bits are \b LCDCAPIE, \b LCDBLKONIE, \b LCDBLKOFFIE and | |
| //! \b LCDFRMIE of \b LCDCTL1 register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_disableInterrupt(uint16_t baseAddress, | |
| uint16_t mask); | |
| //***************************************************************************** | |
| // | |
| //! \brief Clears all LCD memory registers. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! | |
| //! Modified bits are \b LCDCLRM of \b LCDMEMCTL register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_clearMemory(uint16_t baseAddress); | |
| //***************************************************************************** | |
| // | |
| //! \brief Clears all LCD blinking memory registers. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! | |
| //! Modified bits are \b LCDCLRBM of \b LCDMEMCTL register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_clearBlinkingMemory(uint16_t baseAddress); | |
| //***************************************************************************** | |
| // | |
| //! \brief Selects display memory. | |
| //! | |
| //! This function selects display memory either from memory or blinking memory. | |
| //! Please note if the blinking mode is selected as | |
| //! LCD_BLINKMODE_INDIVIDUALSEGMENTS or LCD_BLINKMODE_ALLSEGMENTS or mux rate | |
| //! >=5, display memory can not be changed. If | |
| //! LCD_BLINKMODE_SWITCHDISPLAYCONTENTS is selected, display memory bit | |
| //! reflects current displayed memory. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! \param displayMemory is the desired displayed memory. | |
| //! Valid values are: | |
| //! - \b LCD_C_DISPLAYSOURCE_MEMORY [Default] | |
| //! - \b LCD_C_DISPLAYSOURCE_BLINKINGMEMORY | |
| //! \n Modified bits are \b LCDDISP of \b LCDMEMCTL register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_selectDisplayMemory(uint16_t baseAddress, | |
| uint16_t displayMemory); | |
| //***************************************************************************** | |
| // | |
| //! \brief Sets the blink settings. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! \param clockDivider is the clock divider for blinking frequency. | |
| //! Valid values are: | |
| //! - \b LCD_C_BLINK_FREQ_CLOCK_DIVIDER_1 [Default] | |
| //! - \b LCD_C_BLINK_FREQ_CLOCK_DIVIDER_2 | |
| //! - \b LCD_C_BLINK_FREQ_CLOCK_DIVIDER_3 | |
| //! - \b LCD_C_BLINK_FREQ_CLOCK_DIVIDER_4 | |
| //! - \b LCD_C_BLINK_FREQ_CLOCK_DIVIDER_5 | |
| //! - \b LCD_C_BLINK_FREQ_CLOCK_DIVIDER_6 | |
| //! - \b LCD_C_BLINK_FREQ_CLOCK_DIVIDER_7 | |
| //! - \b LCD_C_BLINK_FREQ_CLOCK_DIVIDER_8 | |
| //! \n Modified bits are \b LCDBLKDIVx of \b LCDBLKCTL register. | |
| //! \param clockPrescalar is the clock pre-scalar for blinking frequency. | |
| //! Valid values are: | |
| //! - \b LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_512 [Default] | |
| //! - \b LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_1024 | |
| //! - \b LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_2048 | |
| //! - \b LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_4096 | |
| //! - \b LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_8162 | |
| //! - \b LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_16384 | |
| //! - \b LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_32768 | |
| //! - \b LCD_C_BLINK_FREQ_CLOCK_PRESCALAR_65536 | |
| //! \n Modified bits are \b LCDBLKPREx of \b LCDBLKCTL register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_setBlinkingControl(uint16_t baseAddress, | |
| uint8_t clockDivider, | |
| uint8_t clockPrescalar, | |
| uint8_t mode); | |
| //***************************************************************************** | |
| // | |
| //! \brief Enables the charge pump. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! | |
| //! Modified bits are \b LCDCPEN of \b LCDVCTL register; bits \b LCDON of \b | |
| //! LCDCTL0 register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_enableChargePump(uint16_t baseAddress); | |
| //***************************************************************************** | |
| // | |
| //! \brief Disables the charge pump. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! | |
| //! Modified bits are \b LCDCPEN of \b LCDVCTL register; bits \b LCDON of \b | |
| //! LCDCTL0 register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_disableChargePump(uint16_t baseAddress); | |
| //***************************************************************************** | |
| // | |
| //! \brief Selects the bias level. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! \param bias is the select for bias level. | |
| //! Valid values are: | |
| //! - \b LCD_C_BIAS_1_3 [Default] - 1/3 bias | |
| //! - \b LCD_C_BIAS_1_2 - 1/2 bias | |
| //! | |
| //! Modified bits are \b LCD2B of \b LCDVCTL register; bits \b LCDON of \b | |
| //! LCDCTL0 register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_selectBias(uint16_t baseAddress, | |
| uint16_t bias); | |
| //***************************************************************************** | |
| // | |
| //! \brief Selects the charge pump reference. | |
| //! | |
| //! The charge pump reference does not support | |
| //! LCD_C_EXTERNAL_REFERENCE_VOLTAGE, | |
| //! LCD_C_INTERNAL_REFERENCE_VOLTAGE_SWITCHED_TO_EXTERNAL_PIN when | |
| //! LCD_C_V2V3V4_SOURCED_EXTERNALLY or | |
| //! LCD_C_V2V3V4_GENERATED_INTERNALLY_SWITCHED_TO_PINS is selected. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! \param reference is the select for charge pump reference. | |
| //! Valid values are: | |
| //! - \b LCD_C_INTERNAL_REFERENCE_VOLTAGE [Default] | |
| //! - \b LCD_C_EXTERNAL_REFERENCE_VOLTAGE | |
| //! - \b LCD_C_INTERNAL_REFERENCE_VOLTAGE_SWITCHED_TO_EXTERNAL_PIN | |
| //! | |
| //! Modified bits are \b VLCDREFx of \b LCDVCTL register; bits \b LCDON of \b | |
| //! LCDCTL0 register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_selectChargePumpReference(uint16_t baseAddress, | |
| uint16_t reference); | |
| //***************************************************************************** | |
| // | |
| //! \brief Sets the voltage source for V2/V3/V4 and V5. | |
| //! | |
| //! The charge pump reference does not support | |
| //! LCD_C_EXTERNAL_REFERENCE_VOLTAGE, | |
| //! LCD_C_INTERNAL_REFERENCE_VOLTAGE_SWITCHED_TO_EXTERNAL_PIN when | |
| //! LCD_C_V2V3V4_SOURCED_EXTERNALLY or | |
| //! LCD_C_V2V3V4_GENERATED_INTERNALLY_SWITCHED_TO_PINS is selected. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! \param vlcdSource is the V(LCD) source select. | |
| //! Valid values are: | |
| //! - \b LCD_C_VLCD_GENERATED_INTERNALLY [Default] | |
| //! - \b LCD_C_VLCD_SOURCED_EXTERNALLY | |
| //! \param v2v3v4Source is the V2/V3/V4 source select. | |
| //! Valid values are: | |
| //! - \b LCD_C_V2V3V4_GENERATED_INTERNALLY_NOT_SWITCHED_TO_PINS | |
| //! [Default] | |
| //! - \b LCD_C_V2V3V4_GENERATED_INTERNALLY_SWITCHED_TO_PINS | |
| //! - \b LCD_C_V2V3V4_SOURCED_EXTERNALLY | |
| //! \param v5Source is the V5 source select. | |
| //! Valid values are: | |
| //! - \b LCD_C_V5_VSS [Default] | |
| //! - \b LCD_C_V5_SOURCED_FROM_R03 | |
| //! | |
| //! Modified bits are \b VLCDEXT, \b LCDREXT, \b LCDEXTBIAS and \b R03EXT of \b | |
| //! LCDVCTL register; bits \b LCDON of \b LCDCTL0 register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_setVLCDSource(uint16_t baseAddress, | |
| uint16_t vlcdSource, | |
| uint16_t v2v3v4Source, | |
| uint16_t v5Source); | |
| //***************************************************************************** | |
| // | |
| //! \brief Selects the charge pump reference. | |
| //! | |
| //! Sets LCD charge pump voltage. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! \param voltage is the charge pump select. | |
| //! Valid values are: | |
| //! - \b LCD_C_CHARGEPUMP_DISABLED [Default] | |
| //! - \b LCD_C_CHARGEPUMP_VOLTAGE_2_60V_OR_2_17VREF | |
| //! - \b LCD_C_CHARGEPUMP_VOLTAGE_2_66V_OR_2_22VREF | |
| //! - \b LCD_C_CHARGEPUMP_VOLTAGE_2_72V_OR_2_27VREF | |
| //! - \b LCD_C_CHARGEPUMP_VOLTAGE_2_78V_OR_2_32VREF | |
| //! - \b LCD_C_CHARGEPUMP_VOLTAGE_2_84V_OR_2_37VREF | |
| //! - \b LCD_C_CHARGEPUMP_VOLTAGE_2_90V_OR_2_42VREF | |
| //! - \b LCD_C_CHARGEPUMP_VOLTAGE_2_96V_OR_2_47VREF | |
| //! - \b LCD_C_CHARGEPUMP_VOLTAGE_3_02V_OR_2_52VREF | |
| //! - \b LCD_C_CHARGEPUMP_VOLTAGE_3_08V_OR_2_57VREF | |
| //! - \b LCD_C_CHARGEPUMP_VOLTAGE_3_14V_OR_2_62VREF | |
| //! - \b LCD_C_CHARGEPUMP_VOLTAGE_3_20V_OR_2_67VREF | |
| //! - \b LCD_C_CHARGEPUMP_VOLTAGE_3_26V_OR_2_72VREF | |
| //! - \b LCD_C_CHARGEPUMP_VOLTAGE_3_32V_OR_2_77VREF | |
| //! - \b LCD_C_CHARGEPUMP_VOLTAGE_3_38V_OR_2_82VREF | |
| //! - \b LCD_C_CHARGEPUMP_VOLTAGE_3_44V_OR_2_87VREF | |
| //! | |
| //! Modified bits are \b VLCDx of \b LCDVCTL register; bits \b LCDON of \b | |
| //! LCDCTL0 register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_setVLCDVoltage(uint16_t baseAddress, | |
| uint16_t voltage); | |
| //***************************************************************************** | |
| // | |
| //! \brief Sets the LCD Pin as LCD functions. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! \param pin is the select pin set as LCD function. | |
| //! Valid values are: | |
| //! - \b LCD_C_SEGMENT_LINE_0 | |
| //! - \b LCD_C_SEGMENT_LINE_1 | |
| //! - \b LCD_C_SEGMENT_LINE_2 | |
| //! - \b LCD_C_SEGMENT_LINE_3 | |
| //! - \b LCD_C_SEGMENT_LINE_4 | |
| //! - \b LCD_C_SEGMENT_LINE_5 | |
| //! - \b LCD_C_SEGMENT_LINE_6 | |
| //! - \b LCD_C_SEGMENT_LINE_7 | |
| //! - \b LCD_C_SEGMENT_LINE_8 | |
| //! - \b LCD_C_SEGMENT_LINE_9 | |
| //! - \b LCD_C_SEGMENT_LINE_10 | |
| //! - \b LCD_C_SEGMENT_LINE_11 | |
| //! - \b LCD_C_SEGMENT_LINE_12 | |
| //! - \b LCD_C_SEGMENT_LINE_13 | |
| //! - \b LCD_C_SEGMENT_LINE_14 | |
| //! - \b LCD_C_SEGMENT_LINE_15 | |
| //! - \b LCD_C_SEGMENT_LINE_16 | |
| //! - \b LCD_C_SEGMENT_LINE_17 | |
| //! - \b LCD_C_SEGMENT_LINE_18 | |
| //! - \b LCD_C_SEGMENT_LINE_19 | |
| //! - \b LCD_C_SEGMENT_LINE_20 | |
| //! - \b LCD_C_SEGMENT_LINE_21 | |
| //! - \b LCD_C_SEGMENT_LINE_22 | |
| //! - \b LCD_C_SEGMENT_LINE_23 | |
| //! - \b LCD_C_SEGMENT_LINE_24 | |
| //! - \b LCD_C_SEGMENT_LINE_25 | |
| //! - \b LCD_C_SEGMENT_LINE_26 | |
| //! - \b LCD_C_SEGMENT_LINE_27 | |
| //! - \b LCD_C_SEGMENT_LINE_28 | |
| //! - \b LCD_C_SEGMENT_LINE_29 | |
| //! - \b LCD_C_SEGMENT_LINE_30 | |
| //! - \b LCD_C_SEGMENT_LINE_31 | |
| //! - \b LCD_C_SEGMENT_LINE_32 | |
| //! - \b LCD_C_SEGMENT_LINE_33 | |
| //! - \b LCD_C_SEGMENT_LINE_34 | |
| //! - \b LCD_C_SEGMENT_LINE_35 | |
| //! - \b LCD_C_SEGMENT_LINE_36 | |
| //! - \b LCD_C_SEGMENT_LINE_37 | |
| //! - \b LCD_C_SEGMENT_LINE_38 | |
| //! - \b LCD_C_SEGMENT_LINE_39 | |
| //! - \b LCD_C_SEGMENT_LINE_40 | |
| //! - \b LCD_C_SEGMENT_LINE_41 | |
| //! - \b LCD_C_SEGMENT_LINE_42 | |
| //! - \b LCD_C_SEGMENT_LINE_43 | |
| //! - \b LCD_C_SEGMENT_LINE_44 | |
| //! - \b LCD_C_SEGMENT_LINE_45 | |
| //! - \b LCD_C_SEGMENT_LINE_46 | |
| //! - \b LCD_C_SEGMENT_LINE_47 | |
| //! - \b LCD_C_SEGMENT_LINE_48 | |
| //! - \b LCD_C_SEGMENT_LINE_49 | |
| //! - \b LCD_C_SEGMENT_LINE_50 | |
| //! - \b LCD_C_SEGMENT_LINE_51 | |
| //! - \b LCD_C_SEGMENT_LINE_52 | |
| //! - \b LCD_C_SEGMENT_LINE_53 | |
| //! - \b LCD_C_SEGMENT_LINE_54 | |
| //! - \b LCD_C_SEGMENT_LINE_55 | |
| //! - \b LCD_C_SEGMENT_LINE_56 | |
| //! - \b LCD_C_SEGMENT_LINE_57 | |
| //! - \b LCD_C_SEGMENT_LINE_58 | |
| //! - \b LCD_C_SEGMENT_LINE_59 | |
| //! - \b LCD_C_SEGMENT_LINE_60 | |
| //! - \b LCD_C_SEGMENT_LINE_61 | |
| //! - \b LCD_C_SEGMENT_LINE_62 | |
| //! - \b LCD_C_SEGMENT_LINE_63 | |
| //! | |
| //! Modified bits are \b LCDSx of \b LCDPCTLx register; bits \b LCDON of \b | |
| //! LCDCTL0 register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_setPinAsLCDFunction(uint16_t baseAddress, | |
| uint8_t pin); | |
| //***************************************************************************** | |
| // | |
| //! \brief Sets the LCD Pin as Port functions. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! \param pin is the select pin set as Port function. | |
| //! Valid values are: | |
| //! - \b LCD_C_SEGMENT_LINE_0 | |
| //! - \b LCD_C_SEGMENT_LINE_1 | |
| //! - \b LCD_C_SEGMENT_LINE_2 | |
| //! - \b LCD_C_SEGMENT_LINE_3 | |
| //! - \b LCD_C_SEGMENT_LINE_4 | |
| //! - \b LCD_C_SEGMENT_LINE_5 | |
| //! - \b LCD_C_SEGMENT_LINE_6 | |
| //! - \b LCD_C_SEGMENT_LINE_7 | |
| //! - \b LCD_C_SEGMENT_LINE_8 | |
| //! - \b LCD_C_SEGMENT_LINE_9 | |
| //! - \b LCD_C_SEGMENT_LINE_10 | |
| //! - \b LCD_C_SEGMENT_LINE_11 | |
| //! - \b LCD_C_SEGMENT_LINE_12 | |
| //! - \b LCD_C_SEGMENT_LINE_13 | |
| //! - \b LCD_C_SEGMENT_LINE_14 | |
| //! - \b LCD_C_SEGMENT_LINE_15 | |
| //! - \b LCD_C_SEGMENT_LINE_16 | |
| //! - \b LCD_C_SEGMENT_LINE_17 | |
| //! - \b LCD_C_SEGMENT_LINE_18 | |
| //! - \b LCD_C_SEGMENT_LINE_19 | |
| //! - \b LCD_C_SEGMENT_LINE_20 | |
| //! - \b LCD_C_SEGMENT_LINE_21 | |
| //! - \b LCD_C_SEGMENT_LINE_22 | |
| //! - \b LCD_C_SEGMENT_LINE_23 | |
| //! - \b LCD_C_SEGMENT_LINE_24 | |
| //! - \b LCD_C_SEGMENT_LINE_25 | |
| //! - \b LCD_C_SEGMENT_LINE_26 | |
| //! - \b LCD_C_SEGMENT_LINE_27 | |
| //! - \b LCD_C_SEGMENT_LINE_28 | |
| //! - \b LCD_C_SEGMENT_LINE_29 | |
| //! - \b LCD_C_SEGMENT_LINE_30 | |
| //! - \b LCD_C_SEGMENT_LINE_31 | |
| //! - \b LCD_C_SEGMENT_LINE_32 | |
| //! - \b LCD_C_SEGMENT_LINE_33 | |
| //! - \b LCD_C_SEGMENT_LINE_34 | |
| //! - \b LCD_C_SEGMENT_LINE_35 | |
| //! - \b LCD_C_SEGMENT_LINE_36 | |
| //! - \b LCD_C_SEGMENT_LINE_37 | |
| //! - \b LCD_C_SEGMENT_LINE_38 | |
| //! - \b LCD_C_SEGMENT_LINE_39 | |
| //! - \b LCD_C_SEGMENT_LINE_40 | |
| //! - \b LCD_C_SEGMENT_LINE_41 | |
| //! - \b LCD_C_SEGMENT_LINE_42 | |
| //! - \b LCD_C_SEGMENT_LINE_43 | |
| //! - \b LCD_C_SEGMENT_LINE_44 | |
| //! - \b LCD_C_SEGMENT_LINE_45 | |
| //! - \b LCD_C_SEGMENT_LINE_46 | |
| //! - \b LCD_C_SEGMENT_LINE_47 | |
| //! - \b LCD_C_SEGMENT_LINE_48 | |
| //! - \b LCD_C_SEGMENT_LINE_49 | |
| //! - \b LCD_C_SEGMENT_LINE_50 | |
| //! - \b LCD_C_SEGMENT_LINE_51 | |
| //! - \b LCD_C_SEGMENT_LINE_52 | |
| //! - \b LCD_C_SEGMENT_LINE_53 | |
| //! - \b LCD_C_SEGMENT_LINE_54 | |
| //! - \b LCD_C_SEGMENT_LINE_55 | |
| //! - \b LCD_C_SEGMENT_LINE_56 | |
| //! - \b LCD_C_SEGMENT_LINE_57 | |
| //! - \b LCD_C_SEGMENT_LINE_58 | |
| //! - \b LCD_C_SEGMENT_LINE_59 | |
| //! - \b LCD_C_SEGMENT_LINE_60 | |
| //! - \b LCD_C_SEGMENT_LINE_61 | |
| //! - \b LCD_C_SEGMENT_LINE_62 | |
| //! - \b LCD_C_SEGMENT_LINE_63 | |
| //! | |
| //! Modified bits are \b LCDSx of \b LCDPCTLx register; bits \b LCDON of \b | |
| //! LCDCTL0 register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_setPinAsPortFunction(uint16_t baseAddress, | |
| uint8_t pin); | |
| //***************************************************************************** | |
| // | |
| //! \brief Sets the LCD pins as LCD function pin. | |
| //! | |
| //! This function sets the LCD pins as LCD function pin. Instead of passing the | |
| //! all the possible pins, it just requires the start pin and the end pin. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! \param startPin is the starting pin to be configed as LCD function pin. | |
| //! Valid values are: | |
| //! - \b LCD_C_SEGMENT_LINE_0 | |
| //! - \b LCD_C_SEGMENT_LINE_1 | |
| //! - \b LCD_C_SEGMENT_LINE_2 | |
| //! - \b LCD_C_SEGMENT_LINE_3 | |
| //! - \b LCD_C_SEGMENT_LINE_4 | |
| //! - \b LCD_C_SEGMENT_LINE_5 | |
| //! - \b LCD_C_SEGMENT_LINE_6 | |
| //! - \b LCD_C_SEGMENT_LINE_7 | |
| //! - \b LCD_C_SEGMENT_LINE_8 | |
| //! - \b LCD_C_SEGMENT_LINE_9 | |
| //! - \b LCD_C_SEGMENT_LINE_10 | |
| //! - \b LCD_C_SEGMENT_LINE_11 | |
| //! - \b LCD_C_SEGMENT_LINE_12 | |
| //! - \b LCD_C_SEGMENT_LINE_13 | |
| //! - \b LCD_C_SEGMENT_LINE_14 | |
| //! - \b LCD_C_SEGMENT_LINE_15 | |
| //! - \b LCD_C_SEGMENT_LINE_16 | |
| //! - \b LCD_C_SEGMENT_LINE_17 | |
| //! - \b LCD_C_SEGMENT_LINE_18 | |
| //! - \b LCD_C_SEGMENT_LINE_19 | |
| //! - \b LCD_C_SEGMENT_LINE_20 | |
| //! - \b LCD_C_SEGMENT_LINE_21 | |
| //! - \b LCD_C_SEGMENT_LINE_22 | |
| //! - \b LCD_C_SEGMENT_LINE_23 | |
| //! - \b LCD_C_SEGMENT_LINE_24 | |
| //! - \b LCD_C_SEGMENT_LINE_25 | |
| //! - \b LCD_C_SEGMENT_LINE_26 | |
| //! - \b LCD_C_SEGMENT_LINE_27 | |
| //! - \b LCD_C_SEGMENT_LINE_28 | |
| //! - \b LCD_C_SEGMENT_LINE_29 | |
| //! - \b LCD_C_SEGMENT_LINE_30 | |
| //! - \b LCD_C_SEGMENT_LINE_31 | |
| //! - \b LCD_C_SEGMENT_LINE_32 | |
| //! - \b LCD_C_SEGMENT_LINE_33 | |
| //! - \b LCD_C_SEGMENT_LINE_34 | |
| //! - \b LCD_C_SEGMENT_LINE_35 | |
| //! - \b LCD_C_SEGMENT_LINE_36 | |
| //! - \b LCD_C_SEGMENT_LINE_37 | |
| //! - \b LCD_C_SEGMENT_LINE_38 | |
| //! - \b LCD_C_SEGMENT_LINE_39 | |
| //! - \b LCD_C_SEGMENT_LINE_40 | |
| //! - \b LCD_C_SEGMENT_LINE_41 | |
| //! - \b LCD_C_SEGMENT_LINE_42 | |
| //! - \b LCD_C_SEGMENT_LINE_43 | |
| //! - \b LCD_C_SEGMENT_LINE_44 | |
| //! - \b LCD_C_SEGMENT_LINE_45 | |
| //! - \b LCD_C_SEGMENT_LINE_46 | |
| //! - \b LCD_C_SEGMENT_LINE_47 | |
| //! - \b LCD_C_SEGMENT_LINE_48 | |
| //! - \b LCD_C_SEGMENT_LINE_49 | |
| //! - \b LCD_C_SEGMENT_LINE_50 | |
| //! - \b LCD_C_SEGMENT_LINE_51 | |
| //! - \b LCD_C_SEGMENT_LINE_52 | |
| //! - \b LCD_C_SEGMENT_LINE_53 | |
| //! - \b LCD_C_SEGMENT_LINE_54 | |
| //! - \b LCD_C_SEGMENT_LINE_55 | |
| //! - \b LCD_C_SEGMENT_LINE_56 | |
| //! - \b LCD_C_SEGMENT_LINE_57 | |
| //! - \b LCD_C_SEGMENT_LINE_58 | |
| //! - \b LCD_C_SEGMENT_LINE_59 | |
| //! - \b LCD_C_SEGMENT_LINE_60 | |
| //! - \b LCD_C_SEGMENT_LINE_61 | |
| //! - \b LCD_C_SEGMENT_LINE_62 | |
| //! - \b LCD_C_SEGMENT_LINE_63 | |
| //! \param endPin is the ending pin to be configed as LCD function pin. | |
| //! Valid values are: | |
| //! - \b LCD_C_SEGMENT_LINE_0 | |
| //! - \b LCD_C_SEGMENT_LINE_1 | |
| //! - \b LCD_C_SEGMENT_LINE_2 | |
| //! - \b LCD_C_SEGMENT_LINE_3 | |
| //! - \b LCD_C_SEGMENT_LINE_4 | |
| //! - \b LCD_C_SEGMENT_LINE_5 | |
| //! - \b LCD_C_SEGMENT_LINE_6 | |
| //! - \b LCD_C_SEGMENT_LINE_7 | |
| //! - \b LCD_C_SEGMENT_LINE_8 | |
| //! - \b LCD_C_SEGMENT_LINE_9 | |
| //! - \b LCD_C_SEGMENT_LINE_10 | |
| //! - \b LCD_C_SEGMENT_LINE_11 | |
| //! - \b LCD_C_SEGMENT_LINE_12 | |
| //! - \b LCD_C_SEGMENT_LINE_13 | |
| //! - \b LCD_C_SEGMENT_LINE_14 | |
| //! - \b LCD_C_SEGMENT_LINE_15 | |
| //! - \b LCD_C_SEGMENT_LINE_16 | |
| //! - \b LCD_C_SEGMENT_LINE_17 | |
| //! - \b LCD_C_SEGMENT_LINE_18 | |
| //! - \b LCD_C_SEGMENT_LINE_19 | |
| //! - \b LCD_C_SEGMENT_LINE_20 | |
| //! - \b LCD_C_SEGMENT_LINE_21 | |
| //! - \b LCD_C_SEGMENT_LINE_22 | |
| //! - \b LCD_C_SEGMENT_LINE_23 | |
| //! - \b LCD_C_SEGMENT_LINE_24 | |
| //! - \b LCD_C_SEGMENT_LINE_25 | |
| //! - \b LCD_C_SEGMENT_LINE_26 | |
| //! - \b LCD_C_SEGMENT_LINE_27 | |
| //! - \b LCD_C_SEGMENT_LINE_28 | |
| //! - \b LCD_C_SEGMENT_LINE_29 | |
| //! - \b LCD_C_SEGMENT_LINE_30 | |
| //! - \b LCD_C_SEGMENT_LINE_31 | |
| //! - \b LCD_C_SEGMENT_LINE_32 | |
| //! - \b LCD_C_SEGMENT_LINE_33 | |
| //! - \b LCD_C_SEGMENT_LINE_34 | |
| //! - \b LCD_C_SEGMENT_LINE_35 | |
| //! - \b LCD_C_SEGMENT_LINE_36 | |
| //! - \b LCD_C_SEGMENT_LINE_37 | |
| //! - \b LCD_C_SEGMENT_LINE_38 | |
| //! - \b LCD_C_SEGMENT_LINE_39 | |
| //! - \b LCD_C_SEGMENT_LINE_40 | |
| //! - \b LCD_C_SEGMENT_LINE_41 | |
| //! - \b LCD_C_SEGMENT_LINE_42 | |
| //! - \b LCD_C_SEGMENT_LINE_43 | |
| //! - \b LCD_C_SEGMENT_LINE_44 | |
| //! - \b LCD_C_SEGMENT_LINE_45 | |
| //! - \b LCD_C_SEGMENT_LINE_46 | |
| //! - \b LCD_C_SEGMENT_LINE_47 | |
| //! - \b LCD_C_SEGMENT_LINE_48 | |
| //! - \b LCD_C_SEGMENT_LINE_49 | |
| //! - \b LCD_C_SEGMENT_LINE_50 | |
| //! - \b LCD_C_SEGMENT_LINE_51 | |
| //! - \b LCD_C_SEGMENT_LINE_52 | |
| //! - \b LCD_C_SEGMENT_LINE_53 | |
| //! - \b LCD_C_SEGMENT_LINE_54 | |
| //! - \b LCD_C_SEGMENT_LINE_55 | |
| //! - \b LCD_C_SEGMENT_LINE_56 | |
| //! - \b LCD_C_SEGMENT_LINE_57 | |
| //! - \b LCD_C_SEGMENT_LINE_58 | |
| //! - \b LCD_C_SEGMENT_LINE_59 | |
| //! - \b LCD_C_SEGMENT_LINE_60 | |
| //! - \b LCD_C_SEGMENT_LINE_61 | |
| //! - \b LCD_C_SEGMENT_LINE_62 | |
| //! - \b LCD_C_SEGMENT_LINE_63 | |
| //! | |
| //! Modified bits are \b LCDSx of \b LCDPCTLx register; bits \b LCDON of \b | |
| //! LCDCTL0 register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_setPinAsLCDFunctionEx(uint16_t baseAddress, | |
| uint8_t startPin, | |
| uint8_t endPin); | |
| //***************************************************************************** | |
| // | |
| //! \brief Sets the LCD memory register. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! \param pin is the select pin for setting value. | |
| //! Valid values are: | |
| //! - \b LCD_C_SEGMENT_LINE_0 | |
| //! - \b LCD_C_SEGMENT_LINE_1 | |
| //! - \b LCD_C_SEGMENT_LINE_2 | |
| //! - \b LCD_C_SEGMENT_LINE_3 | |
| //! - \b LCD_C_SEGMENT_LINE_4 | |
| //! - \b LCD_C_SEGMENT_LINE_5 | |
| //! - \b LCD_C_SEGMENT_LINE_6 | |
| //! - \b LCD_C_SEGMENT_LINE_7 | |
| //! - \b LCD_C_SEGMENT_LINE_8 | |
| //! - \b LCD_C_SEGMENT_LINE_9 | |
| //! - \b LCD_C_SEGMENT_LINE_10 | |
| //! - \b LCD_C_SEGMENT_LINE_11 | |
| //! - \b LCD_C_SEGMENT_LINE_12 | |
| //! - \b LCD_C_SEGMENT_LINE_13 | |
| //! - \b LCD_C_SEGMENT_LINE_14 | |
| //! - \b LCD_C_SEGMENT_LINE_15 | |
| //! - \b LCD_C_SEGMENT_LINE_16 | |
| //! - \b LCD_C_SEGMENT_LINE_17 | |
| //! - \b LCD_C_SEGMENT_LINE_18 | |
| //! - \b LCD_C_SEGMENT_LINE_19 | |
| //! - \b LCD_C_SEGMENT_LINE_20 | |
| //! - \b LCD_C_SEGMENT_LINE_21 | |
| //! - \b LCD_C_SEGMENT_LINE_22 | |
| //! - \b LCD_C_SEGMENT_LINE_23 | |
| //! - \b LCD_C_SEGMENT_LINE_24 | |
| //! - \b LCD_C_SEGMENT_LINE_25 | |
| //! - \b LCD_C_SEGMENT_LINE_26 | |
| //! - \b LCD_C_SEGMENT_LINE_27 | |
| //! - \b LCD_C_SEGMENT_LINE_28 | |
| //! - \b LCD_C_SEGMENT_LINE_29 | |
| //! - \b LCD_C_SEGMENT_LINE_30 | |
| //! - \b LCD_C_SEGMENT_LINE_31 | |
| //! - \b LCD_C_SEGMENT_LINE_32 | |
| //! - \b LCD_C_SEGMENT_LINE_33 | |
| //! - \b LCD_C_SEGMENT_LINE_34 | |
| //! - \b LCD_C_SEGMENT_LINE_35 | |
| //! - \b LCD_C_SEGMENT_LINE_36 | |
| //! - \b LCD_C_SEGMENT_LINE_37 | |
| //! - \b LCD_C_SEGMENT_LINE_38 | |
| //! - \b LCD_C_SEGMENT_LINE_39 | |
| //! - \b LCD_C_SEGMENT_LINE_40 | |
| //! - \b LCD_C_SEGMENT_LINE_41 | |
| //! - \b LCD_C_SEGMENT_LINE_42 | |
| //! - \b LCD_C_SEGMENT_LINE_43 | |
| //! - \b LCD_C_SEGMENT_LINE_44 | |
| //! - \b LCD_C_SEGMENT_LINE_45 | |
| //! - \b LCD_C_SEGMENT_LINE_46 | |
| //! - \b LCD_C_SEGMENT_LINE_47 | |
| //! - \b LCD_C_SEGMENT_LINE_48 | |
| //! - \b LCD_C_SEGMENT_LINE_49 | |
| //! - \b LCD_C_SEGMENT_LINE_50 | |
| //! - \b LCD_C_SEGMENT_LINE_51 | |
| //! - \b LCD_C_SEGMENT_LINE_52 | |
| //! - \b LCD_C_SEGMENT_LINE_53 | |
| //! - \b LCD_C_SEGMENT_LINE_54 | |
| //! - \b LCD_C_SEGMENT_LINE_55 | |
| //! - \b LCD_C_SEGMENT_LINE_56 | |
| //! - \b LCD_C_SEGMENT_LINE_57 | |
| //! - \b LCD_C_SEGMENT_LINE_58 | |
| //! - \b LCD_C_SEGMENT_LINE_59 | |
| //! - \b LCD_C_SEGMENT_LINE_60 | |
| //! - \b LCD_C_SEGMENT_LINE_61 | |
| //! - \b LCD_C_SEGMENT_LINE_62 | |
| //! - \b LCD_C_SEGMENT_LINE_63 | |
| //! \param value is the designated value for corresponding pin. | |
| //! | |
| //! Modified bits are \b MBITx of \b LCDMx register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_setMemory(uint16_t baseAddress, | |
| uint8_t pin, | |
| uint8_t value); | |
| //***************************************************************************** | |
| // | |
| //! \brief Sets the LCD blink memory register. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! \param pin is the select pin for setting value. | |
| //! Valid values are: | |
| //! - \b LCD_C_SEGMENT_LINE_0 | |
| //! - \b LCD_C_SEGMENT_LINE_1 | |
| //! - \b LCD_C_SEGMENT_LINE_2 | |
| //! - \b LCD_C_SEGMENT_LINE_3 | |
| //! - \b LCD_C_SEGMENT_LINE_4 | |
| //! - \b LCD_C_SEGMENT_LINE_5 | |
| //! - \b LCD_C_SEGMENT_LINE_6 | |
| //! - \b LCD_C_SEGMENT_LINE_7 | |
| //! - \b LCD_C_SEGMENT_LINE_8 | |
| //! - \b LCD_C_SEGMENT_LINE_9 | |
| //! - \b LCD_C_SEGMENT_LINE_10 | |
| //! - \b LCD_C_SEGMENT_LINE_11 | |
| //! - \b LCD_C_SEGMENT_LINE_12 | |
| //! - \b LCD_C_SEGMENT_LINE_13 | |
| //! - \b LCD_C_SEGMENT_LINE_14 | |
| //! - \b LCD_C_SEGMENT_LINE_15 | |
| //! - \b LCD_C_SEGMENT_LINE_16 | |
| //! - \b LCD_C_SEGMENT_LINE_17 | |
| //! - \b LCD_C_SEGMENT_LINE_18 | |
| //! - \b LCD_C_SEGMENT_LINE_19 | |
| //! - \b LCD_C_SEGMENT_LINE_20 | |
| //! - \b LCD_C_SEGMENT_LINE_21 | |
| //! - \b LCD_C_SEGMENT_LINE_22 | |
| //! - \b LCD_C_SEGMENT_LINE_23 | |
| //! - \b LCD_C_SEGMENT_LINE_24 | |
| //! - \b LCD_C_SEGMENT_LINE_25 | |
| //! - \b LCD_C_SEGMENT_LINE_26 | |
| //! - \b LCD_C_SEGMENT_LINE_27 | |
| //! - \b LCD_C_SEGMENT_LINE_28 | |
| //! - \b LCD_C_SEGMENT_LINE_29 | |
| //! - \b LCD_C_SEGMENT_LINE_30 | |
| //! - \b LCD_C_SEGMENT_LINE_31 | |
| //! - \b LCD_C_SEGMENT_LINE_32 | |
| //! - \b LCD_C_SEGMENT_LINE_33 | |
| //! - \b LCD_C_SEGMENT_LINE_34 | |
| //! - \b LCD_C_SEGMENT_LINE_35 | |
| //! - \b LCD_C_SEGMENT_LINE_36 | |
| //! - \b LCD_C_SEGMENT_LINE_37 | |
| //! - \b LCD_C_SEGMENT_LINE_38 | |
| //! - \b LCD_C_SEGMENT_LINE_39 | |
| //! - \b LCD_C_SEGMENT_LINE_40 | |
| //! - \b LCD_C_SEGMENT_LINE_41 | |
| //! - \b LCD_C_SEGMENT_LINE_42 | |
| //! - \b LCD_C_SEGMENT_LINE_43 | |
| //! - \b LCD_C_SEGMENT_LINE_44 | |
| //! - \b LCD_C_SEGMENT_LINE_45 | |
| //! - \b LCD_C_SEGMENT_LINE_46 | |
| //! - \b LCD_C_SEGMENT_LINE_47 | |
| //! - \b LCD_C_SEGMENT_LINE_48 | |
| //! - \b LCD_C_SEGMENT_LINE_49 | |
| //! - \b LCD_C_SEGMENT_LINE_50 | |
| //! - \b LCD_C_SEGMENT_LINE_51 | |
| //! - \b LCD_C_SEGMENT_LINE_52 | |
| //! - \b LCD_C_SEGMENT_LINE_53 | |
| //! - \b LCD_C_SEGMENT_LINE_54 | |
| //! - \b LCD_C_SEGMENT_LINE_55 | |
| //! - \b LCD_C_SEGMENT_LINE_56 | |
| //! - \b LCD_C_SEGMENT_LINE_57 | |
| //! - \b LCD_C_SEGMENT_LINE_58 | |
| //! - \b LCD_C_SEGMENT_LINE_59 | |
| //! - \b LCD_C_SEGMENT_LINE_60 | |
| //! - \b LCD_C_SEGMENT_LINE_61 | |
| //! - \b LCD_C_SEGMENT_LINE_62 | |
| //! - \b LCD_C_SEGMENT_LINE_63 | |
| //! \param value is the designated value for corresponding blink pin. | |
| //! | |
| //! Modified bits are \b MBITx of \b LCDBMx register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_setBlinkingMemory(uint16_t baseAddress, | |
| uint8_t pin, | |
| uint8_t value); | |
| //***************************************************************************** | |
| // | |
| //! \brief Configs the charge pump for synchronization and disabled capability. | |
| //! | |
| //! This function is device-specific. The charge pump clock can be synchronized | |
| //! to a device-specific clock, and also can be disabled by connected function. | |
| //! | |
| //! \param baseAddress is the base address of the LCD_C module. | |
| //! \param syncToClock is the synchronization select. | |
| //! Valid values are: | |
| //! - \b LCD_C_SYNCHRONIZATION_DISABLED [Default] | |
| //! - \b LCD_C_SYNCHRONIZATION_ENABLED | |
| //! \param functionControl is the connected function control select. Setting 0 | |
| //! to make connected function not disable charge pump. | |
| //! | |
| //! Modified bits are \b MBITx of \b LCDBMx register. | |
| //! | |
| //! \return None | |
| // | |
| //***************************************************************************** | |
| extern void LCD_C_configChargePump(uint16_t baseAddress, | |
| uint16_t syncToClock, | |
| uint16_t functionControl); | |
| //***************************************************************************** | |
| // | |
| // Mark the end of the C bindings section for C++ compilers. | |
| // | |
| //***************************************************************************** | |
| #ifdef __cplusplus | |
| } | |
| #endif | |
| #endif | |
| #endif // __MSP430WARE_LCD_C_H__ |