|author||Stephane Viau <firstname.lastname@example.org>||Fri Oct 15 18:21:56 2021 +0200|
|committer||GitHub <email@example.com>||Fri Oct 15 09:21:56 2021 -0700|
Handle interrupt acknowledge register in Cortex-A53 SRE port (#392) Let the FreeRTOS IRQ handler properly store and restore the ICCIAR register value around the vApplicationIRQHandler() call. Signed-off-by: Stephane Viau <firstname.lastname@example.org> Co-authored-by: Stephane Viau <email@example.com> Co-authored-by: Gaurav-Aggarwal-AWS <firstname.lastname@example.org>
This repository contains FreeRTOS kernel source/header files and kernel ports only. This repository is referenced as a submodule in FreeRTOS/FreeRTOS repository, which contains pre-configured demo application projects under
The easiest way to use FreeRTOS is to start with one of the pre-configured demo application projects. That way you will have the correct FreeRTOS source files included, and the correct include paths configured. Once a demo application is building and executing you can remove the demo application files, and start to add in your own application source files. See the FreeRTOS Kernel Quick Start Guide for detailed instructions and other useful links.
If you have any questions or need assistance troubleshooting your FreeRTOS project, we have an active community that can help on the FreeRTOS Community Support Forum.
To clone using HTTPS:
git clone https://github.com/FreeRTOS/FreeRTOS-Kernel.git
git clone email@example.com:FreeRTOS/FreeRTOS-Kernel.git
The root of this repository contains the three files that are common to every port - list.c, queue.c and tasks.c. The kernel is contained within these three files. croutine.c implements the optional co-routine functionality - which is normally only used on very memory limited systems.
./portable directory contains the files that are specific to a particular microcontroller and/or compiler. See the readme file in the
./portable directory for more information.
./include directory contains the real time kernel header files.
FreeRTOS files are formatted using the “uncrustify” tool. The configuration file used by uncrustify can be found in the FreeRTOS/FreeRTOS repository.
lexicon.txt contains words that are not traditionally found in an English dictionary. It is used by the spellchecker to verify the various jargon, variable names, and other odd words used in the FreeRTOS code base. If your pull request fails to pass the spelling and you believe this is a mistake, then add the word to lexicon.txt. Note that only the FreeRTOS Kernel source files are checked for proper spelling, the portable section is ignored.