Create project for SAM4S. This is building but has not yet been tested on hardware.
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_acc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_acc.h new file mode 100644 index 0000000..ee42b2b --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_acc.h
@@ -0,0 +1,134 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_ACC_COMPONENT_ +#define _SAM4S_ACC_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Analog Comparator Controller */ +/* ============================================================================= */ +/** \addtogroup SAM4S_ACC Analog Comparator Controller */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Acc hardware registers */ +typedef struct { + WoReg ACC_CR; /**< \brief (Acc Offset: 0x00) Control Register */ + RwReg ACC_MR; /**< \brief (Acc Offset: 0x04) Mode Register */ + RoReg Reserved1[7]; + WoReg ACC_IER; /**< \brief (Acc Offset: 0x24) Interrupt Enable Register */ + WoReg ACC_IDR; /**< \brief (Acc Offset: 0x28) Interrupt Disable Register */ + RoReg ACC_IMR; /**< \brief (Acc Offset: 0x2C) Interrupt Mask Register */ + RoReg ACC_ISR; /**< \brief (Acc Offset: 0x30) Interrupt Status Register */ + RoReg Reserved2[24]; + RwReg ACC_ACR; /**< \brief (Acc Offset: 0x94) Analog Control Register */ + RoReg Reserved3[19]; + RwReg ACC_WPMR; /**< \brief (Acc Offset: 0xE4) Write Protect Mode Register */ + RoReg ACC_WPSR; /**< \brief (Acc Offset: 0xE8) Write Protect Status Register */ +} Acc; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- ACC_CR : (ACC Offset: 0x00) Control Register -------- */ +#define ACC_CR_SWRST (0x1u << 0) /**< \brief (ACC_CR) SoftWare ReSeT */ +/* -------- ACC_MR : (ACC Offset: 0x04) Mode Register -------- */ +#define ACC_MR_SELMINUS_Pos 0 +#define ACC_MR_SELMINUS_Msk (0x7u << ACC_MR_SELMINUS_Pos) /**< \brief (ACC_MR) SELection for MINUS comparator input */ +#define ACC_MR_SELMINUS_TS (0x0u << 0) /**< \brief (ACC_MR) SelectTS */ +#define ACC_MR_SELMINUS_ADVREF (0x1u << 0) /**< \brief (ACC_MR) Select ADVREF */ +#define ACC_MR_SELMINUS_DAC0 (0x2u << 0) /**< \brief (ACC_MR) Select DAC0 */ +#define ACC_MR_SELMINUS_DAC1 (0x3u << 0) /**< \brief (ACC_MR) Select DAC1 */ +#define ACC_MR_SELMINUS_AD0 (0x4u << 0) /**< \brief (ACC_MR) Select AD0 */ +#define ACC_MR_SELMINUS_AD1 (0x5u << 0) /**< \brief (ACC_MR) Select AD1 */ +#define ACC_MR_SELMINUS_AD2 (0x6u << 0) /**< \brief (ACC_MR) Select AD2 */ +#define ACC_MR_SELMINUS_AD3 (0x7u << 0) /**< \brief (ACC_MR) Select AD3 */ +#define ACC_MR_SELPLUS_Pos 4 +#define ACC_MR_SELPLUS_Msk (0x7u << ACC_MR_SELPLUS_Pos) /**< \brief (ACC_MR) SELection for PLUS comparator input */ +#define ACC_MR_SELPLUS_AD0 (0x0u << 4) /**< \brief (ACC_MR) Select AD0 */ +#define ACC_MR_SELPLUS_AD1 (0x1u << 4) /**< \brief (ACC_MR) Select AD1 */ +#define ACC_MR_SELPLUS_AD2 (0x2u << 4) /**< \brief (ACC_MR) Select AD2 */ +#define ACC_MR_SELPLUS_AD3 (0x3u << 4) /**< \brief (ACC_MR) Select AD3 */ +#define ACC_MR_SELPLUS_AD4 (0x4u << 4) /**< \brief (ACC_MR) Select AD4 */ +#define ACC_MR_SELPLUS_AD5 (0x5u << 4) /**< \brief (ACC_MR) Select AD5 */ +#define ACC_MR_SELPLUS_AD6 (0x6u << 4) /**< \brief (ACC_MR) Select AD6 */ +#define ACC_MR_SELPLUS_AD7 (0x7u << 4) /**< \brief (ACC_MR) Select AD7 */ +#define ACC_MR_ACEN (0x1u << 8) /**< \brief (ACC_MR) Analog Comparator ENable */ +#define ACC_MR_ACEN_DIS (0x0u << 8) /**< \brief (ACC_MR) Analog Comparator Disabled. */ +#define ACC_MR_ACEN_EN (0x1u << 8) /**< \brief (ACC_MR) Analog Comparator Enabled. */ +#define ACC_MR_EDGETYP_Pos 9 +#define ACC_MR_EDGETYP_Msk (0x3u << ACC_MR_EDGETYP_Pos) /**< \brief (ACC_MR) EDGE TYPe */ +#define ACC_MR_EDGETYP_RISING (0x0u << 9) /**< \brief (ACC_MR) only rising edge of comparator output */ +#define ACC_MR_EDGETYP_FALLING (0x1u << 9) /**< \brief (ACC_MR) falling edge of comparator output */ +#define ACC_MR_EDGETYP_ANY (0x2u << 9) /**< \brief (ACC_MR) any edge of comparator output */ +#define ACC_MR_INV (0x1u << 12) /**< \brief (ACC_MR) INVert comparator output */ +#define ACC_MR_INV_DIS (0x0u << 12) /**< \brief (ACC_MR) Analog Comparator output is directly processed. */ +#define ACC_MR_INV_EN (0x1u << 12) /**< \brief (ACC_MR) Analog Comparator output is inverted prior to being processed. */ +#define ACC_MR_SELFS (0x1u << 13) /**< \brief (ACC_MR) SELection of Fault Source */ +#define ACC_MR_SELFS_CF (0x0u << 13) /**< \brief (ACC_MR) the CF flag is used to drive the FAULT output. */ +#define ACC_MR_SELFS_OUTPUT (0x1u << 13) /**< \brief (ACC_MR) the output of the Analog Comparator flag is used to drive the FAULT output. */ +#define ACC_MR_FE (0x1u << 14) /**< \brief (ACC_MR) Fault Enable */ +#define ACC_MR_FE_DIS (0x0u << 14) /**< \brief (ACC_MR) the FAULT output is tied to 0. */ +#define ACC_MR_FE_EN (0x1u << 14) /**< \brief (ACC_MR) the FAULT output is driven by the signal defined by SELFS. */ +/* -------- ACC_IER : (ACC Offset: 0x24) Interrupt Enable Register -------- */ +#define ACC_IER_CE (0x1u << 0) /**< \brief (ACC_IER) Comparison Edge */ +/* -------- ACC_IDR : (ACC Offset: 0x28) Interrupt Disable Register -------- */ +#define ACC_IDR_CE (0x1u << 0) /**< \brief (ACC_IDR) Comparison Edge */ +/* -------- ACC_IMR : (ACC Offset: 0x2C) Interrupt Mask Register -------- */ +#define ACC_IMR_CE (0x1u << 0) /**< \brief (ACC_IMR) Comparison Edge */ +/* -------- ACC_ISR : (ACC Offset: 0x30) Interrupt Status Register -------- */ +#define ACC_ISR_CE (0x1u << 0) /**< \brief (ACC_ISR) Comparison Edge */ +#define ACC_ISR_SCO (0x1u << 1) /**< \brief (ACC_ISR) Synchronized Comparator Output */ +#define ACC_ISR_MASK (0x1u << 31) /**< \brief (ACC_ISR) */ +/* -------- ACC_ACR : (ACC Offset: 0x94) Analog Control Register -------- */ +#define ACC_ACR_ISEL (0x1u << 0) /**< \brief (ACC_ACR) Current SELection */ +#define ACC_ACR_ISEL_LOPW (0x0u << 0) /**< \brief (ACC_ACR) low power option. */ +#define ACC_ACR_ISEL_HISP (0x1u << 0) /**< \brief (ACC_ACR) high speed option. */ +#define ACC_ACR_HYST_Pos 1 +#define ACC_ACR_HYST_Msk (0x3u << ACC_ACR_HYST_Pos) /**< \brief (ACC_ACR) HYSTeresis selection */ +#define ACC_ACR_HYST(value) ((ACC_ACR_HYST_Msk & ((value) << ACC_ACR_HYST_Pos))) +/* -------- ACC_WPMR : (ACC Offset: 0xE4) Write Protect Mode Register -------- */ +#define ACC_WPMR_WPEN (0x1u << 0) /**< \brief (ACC_WPMR) Write Protect Enable */ +#define ACC_WPMR_WPKEY_Pos 8 +#define ACC_WPMR_WPKEY_Msk (0xffffffu << ACC_WPMR_WPKEY_Pos) /**< \brief (ACC_WPMR) Write Protect KEY */ +#define ACC_WPMR_WPKEY(value) ((ACC_WPMR_WPKEY_Msk & ((value) << ACC_WPMR_WPKEY_Pos))) +/* -------- ACC_WPSR : (ACC Offset: 0xE8) Write Protect Status Register -------- */ +#define ACC_WPSR_WPROTERR (0x1u << 0) /**< \brief (ACC_WPSR) Write PROTection ERRor */ + +/*@}*/ + + +#endif /* _SAM4S_ACC_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_adc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_adc.h new file mode 100644 index 0000000..099f392 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_adc.h
@@ -0,0 +1,513 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_ADC_COMPONENT_ +#define _SAM4S_ADC_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Analog-to-digital Converter */ +/* ============================================================================= */ +/** \addtogroup SAM4S_ADC Analog-to-digital Converter */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Adc hardware registers */ +typedef struct { + WoReg ADC_CR; /**< \brief (Adc Offset: 0x00) Control Register */ + RwReg ADC_MR; /**< \brief (Adc Offset: 0x04) Mode Register */ + RwReg ADC_SEQR1; /**< \brief (Adc Offset: 0x08) Channel Sequence Register 1 */ + RwReg ADC_SEQR2; /**< \brief (Adc Offset: 0x0C) Channel Sequence Register 2 */ + WoReg ADC_CHER; /**< \brief (Adc Offset: 0x10) Channel Enable Register */ + WoReg ADC_CHDR; /**< \brief (Adc Offset: 0x14) Channel Disable Register */ + RoReg ADC_CHSR; /**< \brief (Adc Offset: 0x18) Channel Status Register */ + RoReg Reserved1[1]; + RoReg ADC_LCDR; /**< \brief (Adc Offset: 0x20) Last Converted Data Register */ + WoReg ADC_IER; /**< \brief (Adc Offset: 0x24) Interrupt Enable Register */ + WoReg ADC_IDR; /**< \brief (Adc Offset: 0x28) Interrupt Disable Register */ + RoReg ADC_IMR; /**< \brief (Adc Offset: 0x2C) Interrupt Mask Register */ + RoReg ADC_ISR; /**< \brief (Adc Offset: 0x30) Interrupt Status Register */ + RoReg Reserved2[2]; + RoReg ADC_OVER; /**< \brief (Adc Offset: 0x3C) Overrun Status Register */ + RwReg ADC_EMR; /**< \brief (Adc Offset: 0x40) Extended Mode Register */ + RwReg ADC_CWR; /**< \brief (Adc Offset: 0x44) Compare Window Register */ + RwReg ADC_CGR; /**< \brief (Adc Offset: 0x48) Channel Gain Register */ + RwReg ADC_COR; /**< \brief (Adc Offset: 0x4C) Channel Offset Register */ + RoReg ADC_CDR[16]; /**< \brief (Adc Offset: 0x50) Channel Data Register */ + RoReg Reserved3[1]; + RwReg ADC_ACR; /**< \brief (Adc Offset: 0x94) Analog Control Register */ + RoReg Reserved4[19]; + RwReg ADC_WPMR; /**< \brief (Adc Offset: 0xE4) Write Protect Mode Register */ + RoReg ADC_WPSR; /**< \brief (Adc Offset: 0xE8) Write Protect Status Register */ + RoReg Reserved5[5]; + RwReg ADC_RPR; /**< \brief (Adc Offset: 0x100) Receive Pointer Register */ + RwReg ADC_RCR; /**< \brief (Adc Offset: 0x104) Receive Counter Register */ + RoReg Reserved6[2]; + RwReg ADC_RNPR; /**< \brief (Adc Offset: 0x110) Receive Next Pointer Register */ + RwReg ADC_RNCR; /**< \brief (Adc Offset: 0x114) Receive Next Counter Register */ + RoReg Reserved7[2]; + WoReg ADC_PTCR; /**< \brief (Adc Offset: 0x120) Transfer Control Register */ + RoReg ADC_PTSR; /**< \brief (Adc Offset: 0x124) Transfer Status Register */ +} Adc; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- ADC_CR : (ADC Offset: 0x00) Control Register -------- */ +#define ADC_CR_SWRST (0x1u << 0) /**< \brief (ADC_CR) Software Reset */ +#define ADC_CR_START (0x1u << 1) /**< \brief (ADC_CR) Start Conversion */ +#define ADC_CR_AUTOCAL (0x1u << 3) /**< \brief (ADC_CR) Automatic Calibration of ADC */ +/* -------- ADC_MR : (ADC Offset: 0x04) Mode Register -------- */ +#define ADC_MR_TRGEN (0x1u << 0) /**< \brief (ADC_MR) Trigger Enable */ +#define ADC_MR_TRGEN_DIS (0x0u << 0) /**< \brief (ADC_MR) Hardware triggers are disabled. Starting a conversion is only possible by software. */ +#define ADC_MR_TRGEN_EN (0x1u << 0) /**< \brief (ADC_MR) Hardware trigger selected by TRGSEL field is enabled. */ +#define ADC_MR_TRGSEL_Pos 1 +#define ADC_MR_TRGSEL_Msk (0x7u << ADC_MR_TRGSEL_Pos) /**< \brief (ADC_MR) Trigger Selection */ +#define ADC_MR_TRGSEL_ADC_TRIG0 (0x0u << 1) /**< \brief (ADC_MR) External trigger */ +#define ADC_MR_TRGSEL_ADC_TRIG1 (0x1u << 1) /**< \brief (ADC_MR) TIO Output of the Timer Counter Channel 0 */ +#define ADC_MR_TRGSEL_ADC_TRIG2 (0x2u << 1) /**< \brief (ADC_MR) TIO Output of the Timer Counter Channel 1 */ +#define ADC_MR_TRGSEL_ADC_TRIG3 (0x3u << 1) /**< \brief (ADC_MR) TIO Output of the Timer Counter Channel 2 */ +#define ADC_MR_TRGSEL_ADC_TRIG4 (0x4u << 1) /**< \brief (ADC_MR) PWM Event Line 0 */ +#define ADC_MR_TRGSEL_ADC_TRIG5 (0x5u << 1) /**< \brief (ADC_MR) PWM Event Line 1 */ +#define ADC_MR_LOWRES (0x1u << 4) /**< \brief (ADC_MR) Resolution */ +#define ADC_MR_LOWRES_BITS_12 (0x0u << 4) /**< \brief (ADC_MR) 12-bit resolution */ +#define ADC_MR_LOWRES_BITS_10 (0x1u << 4) /**< \brief (ADC_MR) 10-bit resolution */ +#define ADC_MR_SLEEP (0x1u << 5) /**< \brief (ADC_MR) Sleep Mode */ +#define ADC_MR_SLEEP_NORMAL (0x0u << 5) /**< \brief (ADC_MR) Normal Mode: The ADC Core and reference voltage circuitry are kept ON between conversions */ +#define ADC_MR_SLEEP_SLEEP (0x1u << 5) /**< \brief (ADC_MR) Sleep Mode: The ADC Core and reference voltage circuitry are OFF between conversions */ +#define ADC_MR_FWUP (0x1u << 6) /**< \brief (ADC_MR) Fast Wake Up */ +#define ADC_MR_FWUP_OFF (0x0u << 6) /**< \brief (ADC_MR) Normal Sleep Mode: The sleep mode is defined by the SLEEP bit */ +#define ADC_MR_FWUP_ON (0x1u << 6) /**< \brief (ADC_MR) Fast Wake Up Sleep Mode: The Voltage reference is ON between conversions and ADC Core is OFF */ +#define ADC_MR_FREERUN (0x1u << 7) /**< \brief (ADC_MR) Free Run Mode */ +#define ADC_MR_FREERUN_OFF (0x0u << 7) /**< \brief (ADC_MR) Normal Mode */ +#define ADC_MR_FREERUN_ON (0x1u << 7) /**< \brief (ADC_MR) Free Run Mode: Never wait for any trigger. */ +#define ADC_MR_PRESCAL_Pos 8 +#define ADC_MR_PRESCAL_Msk (0xffu << ADC_MR_PRESCAL_Pos) /**< \brief (ADC_MR) Prescaler Rate Selection */ +#define ADC_MR_PRESCAL(value) ((ADC_MR_PRESCAL_Msk & ((value) << ADC_MR_PRESCAL_Pos))) +#define ADC_MR_STARTUP_Pos 16 +#define ADC_MR_STARTUP_Msk (0xfu << ADC_MR_STARTUP_Pos) /**< \brief (ADC_MR) Start Up Time */ +#define ADC_MR_STARTUP_SUT0 (0x0u << 16) /**< \brief (ADC_MR) 0 periods of ADCClock */ +#define ADC_MR_STARTUP_SUT8 (0x1u << 16) /**< \brief (ADC_MR) 8 periods of ADCClock */ +#define ADC_MR_STARTUP_SUT16 (0x2u << 16) /**< \brief (ADC_MR) 16 periods of ADCClock */ +#define ADC_MR_STARTUP_SUT24 (0x3u << 16) /**< \brief (ADC_MR) 24 periods of ADCClock */ +#define ADC_MR_STARTUP_SUT64 (0x4u << 16) /**< \brief (ADC_MR) 64 periods of ADCClock */ +#define ADC_MR_STARTUP_SUT80 (0x5u << 16) /**< \brief (ADC_MR) 80 periods of ADCClock */ +#define ADC_MR_STARTUP_SUT96 (0x6u << 16) /**< \brief (ADC_MR) 96 periods of ADCClock */ +#define ADC_MR_STARTUP_SUT112 (0x7u << 16) /**< \brief (ADC_MR) 112 periods of ADCClock */ +#define ADC_MR_STARTUP_SUT512 (0x8u << 16) /**< \brief (ADC_MR) 512 periods of ADCClock */ +#define ADC_MR_STARTUP_SUT576 (0x9u << 16) /**< \brief (ADC_MR) 576 periods of ADCClock */ +#define ADC_MR_STARTUP_SUT640 (0xAu << 16) /**< \brief (ADC_MR) 640 periods of ADCClock */ +#define ADC_MR_STARTUP_SUT704 (0xBu << 16) /**< \brief (ADC_MR) 704 periods of ADCClock */ +#define ADC_MR_STARTUP_SUT768 (0xCu << 16) /**< \brief (ADC_MR) 768 periods of ADCClock */ +#define ADC_MR_STARTUP_SUT832 (0xDu << 16) /**< \brief (ADC_MR) 832 periods of ADCClock */ +#define ADC_MR_STARTUP_SUT896 (0xEu << 16) /**< \brief (ADC_MR) 896 periods of ADCClock */ +#define ADC_MR_STARTUP_SUT960 (0xFu << 16) /**< \brief (ADC_MR) 960 periods of ADCClock */ +#define ADC_MR_SETTLING_Pos 20 +#define ADC_MR_SETTLING_Msk (0x3u << ADC_MR_SETTLING_Pos) /**< \brief (ADC_MR) Analog Settling Time */ +#define ADC_MR_SETTLING_AST3 (0x0u << 20) /**< \brief (ADC_MR) 3 periods of ADCClock */ +#define ADC_MR_SETTLING_AST5 (0x1u << 20) /**< \brief (ADC_MR) 5 periods of ADCClock */ +#define ADC_MR_SETTLING_AST9 (0x2u << 20) /**< \brief (ADC_MR) 9 periods of ADCClock */ +#define ADC_MR_SETTLING_AST17 (0x3u << 20) /**< \brief (ADC_MR) 17 periods of ADCClock */ +#define ADC_MR_ANACH (0x1u << 23) /**< \brief (ADC_MR) Analog Change */ +#define ADC_MR_ANACH_NONE (0x0u << 23) /**< \brief (ADC_MR) No analog change on channel switching: DIFF0, GAIN0 and OFF0 are used for all channels */ +#define ADC_MR_ANACH_ALLOWED (0x1u << 23) /**< \brief (ADC_MR) Allows different analog settings for each channel. See ADC_CGR and ADC_COR Registers */ +#define ADC_MR_TRACKTIM_Pos 24 +#define ADC_MR_TRACKTIM_Msk (0xfu << ADC_MR_TRACKTIM_Pos) /**< \brief (ADC_MR) Tracking Time */ +#define ADC_MR_TRACKTIM(value) ((ADC_MR_TRACKTIM_Msk & ((value) << ADC_MR_TRACKTIM_Pos))) +#define ADC_MR_TRANSFER_Pos 28 +#define ADC_MR_TRANSFER_Msk (0x3u << ADC_MR_TRANSFER_Pos) /**< \brief (ADC_MR) Transfer Period */ +#define ADC_MR_TRANSFER(value) ((ADC_MR_TRANSFER_Msk & ((value) << ADC_MR_TRANSFER_Pos))) +#define ADC_MR_USEQ (0x1u << 31) /**< \brief (ADC_MR) Use Sequence Enable */ +#define ADC_MR_USEQ_NUM_ORDER (0x0u << 31) /**< \brief (ADC_MR) Normal Mode: The controller converts channels in a simple numeric order. */ +#define ADC_MR_USEQ_REG_ORDER (0x1u << 31) /**< \brief (ADC_MR) User Sequence Mode: The sequence respects what is defined in ADC_SEQR1 and ADC_SEQR2 registers. */ +/* -------- ADC_SEQR1 : (ADC Offset: 0x08) Channel Sequence Register 1 -------- */ +#define ADC_SEQR1_USCH1_Pos 0 +#define ADC_SEQR1_USCH1_Msk (0x7u << ADC_SEQR1_USCH1_Pos) /**< \brief (ADC_SEQR1) User Sequence Number 1 */ +#define ADC_SEQR1_USCH1(value) ((ADC_SEQR1_USCH1_Msk & ((value) << ADC_SEQR1_USCH1_Pos))) +#define ADC_SEQR1_USCH2_Pos 4 +#define ADC_SEQR1_USCH2_Msk (0x7u << ADC_SEQR1_USCH2_Pos) /**< \brief (ADC_SEQR1) User Sequence Number 2 */ +#define ADC_SEQR1_USCH2(value) ((ADC_SEQR1_USCH2_Msk & ((value) << ADC_SEQR1_USCH2_Pos))) +#define ADC_SEQR1_USCH3_Pos 8 +#define ADC_SEQR1_USCH3_Msk (0x7u << ADC_SEQR1_USCH3_Pos) /**< \brief (ADC_SEQR1) User Sequence Number 3 */ +#define ADC_SEQR1_USCH3(value) ((ADC_SEQR1_USCH3_Msk & ((value) << ADC_SEQR1_USCH3_Pos))) +#define ADC_SEQR1_USCH4_Pos 12 +#define ADC_SEQR1_USCH4_Msk (0x7u << ADC_SEQR1_USCH4_Pos) /**< \brief (ADC_SEQR1) User Sequence Number 4 */ +#define ADC_SEQR1_USCH4(value) ((ADC_SEQR1_USCH4_Msk & ((value) << ADC_SEQR1_USCH4_Pos))) +#define ADC_SEQR1_USCH5_Pos 16 +#define ADC_SEQR1_USCH5_Msk (0x7u << ADC_SEQR1_USCH5_Pos) /**< \brief (ADC_SEQR1) User Sequence Number 5 */ +#define ADC_SEQR1_USCH5(value) ((ADC_SEQR1_USCH5_Msk & ((value) << ADC_SEQR1_USCH5_Pos))) +#define ADC_SEQR1_USCH6_Pos 20 +#define ADC_SEQR1_USCH6_Msk (0x7u << ADC_SEQR1_USCH6_Pos) /**< \brief (ADC_SEQR1) User Sequence Number 6 */ +#define ADC_SEQR1_USCH6(value) ((ADC_SEQR1_USCH6_Msk & ((value) << ADC_SEQR1_USCH6_Pos))) +#define ADC_SEQR1_USCH7_Pos 24 +#define ADC_SEQR1_USCH7_Msk (0x7u << ADC_SEQR1_USCH7_Pos) /**< \brief (ADC_SEQR1) User Sequence Number 7 */ +#define ADC_SEQR1_USCH7(value) ((ADC_SEQR1_USCH7_Msk & ((value) << ADC_SEQR1_USCH7_Pos))) +#define ADC_SEQR1_USCH8_Pos 28 +#define ADC_SEQR1_USCH8_Msk (0x7u << ADC_SEQR1_USCH8_Pos) /**< \brief (ADC_SEQR1) User Sequence Number 8 */ +#define ADC_SEQR1_USCH8(value) ((ADC_SEQR1_USCH8_Msk & ((value) << ADC_SEQR1_USCH8_Pos))) +/* -------- ADC_SEQR2 : (ADC Offset: 0x0C) Channel Sequence Register 2 -------- */ +#define ADC_SEQR2_USCH9_Pos 0 +#define ADC_SEQR2_USCH9_Msk (0x7u << ADC_SEQR2_USCH9_Pos) /**< \brief (ADC_SEQR2) User Sequence Number 9 */ +#define ADC_SEQR2_USCH9(value) ((ADC_SEQR2_USCH9_Msk & ((value) << ADC_SEQR2_USCH9_Pos))) +#define ADC_SEQR2_USCH10_Pos 4 +#define ADC_SEQR2_USCH10_Msk (0x7u << ADC_SEQR2_USCH10_Pos) /**< \brief (ADC_SEQR2) User Sequence Number 10 */ +#define ADC_SEQR2_USCH10(value) ((ADC_SEQR2_USCH10_Msk & ((value) << ADC_SEQR2_USCH10_Pos))) +#define ADC_SEQR2_USCH11_Pos 8 +#define ADC_SEQR2_USCH11_Msk (0x7u << ADC_SEQR2_USCH11_Pos) /**< \brief (ADC_SEQR2) User Sequence Number 11 */ +#define ADC_SEQR2_USCH11(value) ((ADC_SEQR2_USCH11_Msk & ((value) << ADC_SEQR2_USCH11_Pos))) +#define ADC_SEQR2_USCH12_Pos 12 +#define ADC_SEQR2_USCH12_Msk (0x7u << ADC_SEQR2_USCH12_Pos) /**< \brief (ADC_SEQR2) User Sequence Number 12 */ +#define ADC_SEQR2_USCH12(value) ((ADC_SEQR2_USCH12_Msk & ((value) << ADC_SEQR2_USCH12_Pos))) +#define ADC_SEQR2_USCH13_Pos 16 +#define ADC_SEQR2_USCH13_Msk (0x7u << ADC_SEQR2_USCH13_Pos) /**< \brief (ADC_SEQR2) User Sequence Number 13 */ +#define ADC_SEQR2_USCH13(value) ((ADC_SEQR2_USCH13_Msk & ((value) << ADC_SEQR2_USCH13_Pos))) +#define ADC_SEQR2_USCH14_Pos 20 +#define ADC_SEQR2_USCH14_Msk (0x7u << ADC_SEQR2_USCH14_Pos) /**< \brief (ADC_SEQR2) User Sequence Number 14 */ +#define ADC_SEQR2_USCH14(value) ((ADC_SEQR2_USCH14_Msk & ((value) << ADC_SEQR2_USCH14_Pos))) +#define ADC_SEQR2_USCH15_Pos 24 +#define ADC_SEQR2_USCH15_Msk (0x7u << ADC_SEQR2_USCH15_Pos) /**< \brief (ADC_SEQR2) User Sequence Number 15 */ +#define ADC_SEQR2_USCH15(value) ((ADC_SEQR2_USCH15_Msk & ((value) << ADC_SEQR2_USCH15_Pos))) +#define ADC_SEQR2_USCH16_Pos 28 +#define ADC_SEQR2_USCH16_Msk (0x7u << ADC_SEQR2_USCH16_Pos) /**< \brief (ADC_SEQR2) User Sequence Number 16 */ +#define ADC_SEQR2_USCH16(value) ((ADC_SEQR2_USCH16_Msk & ((value) << ADC_SEQR2_USCH16_Pos))) +/* -------- ADC_CHER : (ADC Offset: 0x10) Channel Enable Register -------- */ +#define ADC_CHER_CH0 (0x1u << 0) /**< \brief (ADC_CHER) Channel 0 Enable */ +#define ADC_CHER_CH1 (0x1u << 1) /**< \brief (ADC_CHER) Channel 1 Enable */ +#define ADC_CHER_CH2 (0x1u << 2) /**< \brief (ADC_CHER) Channel 2 Enable */ +#define ADC_CHER_CH3 (0x1u << 3) /**< \brief (ADC_CHER) Channel 3 Enable */ +#define ADC_CHER_CH4 (0x1u << 4) /**< \brief (ADC_CHER) Channel 4 Enable */ +#define ADC_CHER_CH5 (0x1u << 5) /**< \brief (ADC_CHER) Channel 5 Enable */ +#define ADC_CHER_CH6 (0x1u << 6) /**< \brief (ADC_CHER) Channel 6 Enable */ +#define ADC_CHER_CH7 (0x1u << 7) /**< \brief (ADC_CHER) Channel 7 Enable */ +#define ADC_CHER_CH8 (0x1u << 8) /**< \brief (ADC_CHER) Channel 8 Enable */ +#define ADC_CHER_CH9 (0x1u << 9) /**< \brief (ADC_CHER) Channel 9 Enable */ +#define ADC_CHER_CH10 (0x1u << 10) /**< \brief (ADC_CHER) Channel 10 Enable */ +#define ADC_CHER_CH11 (0x1u << 11) /**< \brief (ADC_CHER) Channel 11 Enable */ +#define ADC_CHER_CH12 (0x1u << 12) /**< \brief (ADC_CHER) Channel 12 Enable */ +#define ADC_CHER_CH13 (0x1u << 13) /**< \brief (ADC_CHER) Channel 13 Enable */ +#define ADC_CHER_CH14 (0x1u << 14) /**< \brief (ADC_CHER) Channel 14 Enable */ +#define ADC_CHER_CH15 (0x1u << 15) /**< \brief (ADC_CHER) Channel 15 Enable */ +/* -------- ADC_CHDR : (ADC Offset: 0x14) Channel Disable Register -------- */ +#define ADC_CHDR_CH0 (0x1u << 0) /**< \brief (ADC_CHDR) Channel 0 Disable */ +#define ADC_CHDR_CH1 (0x1u << 1) /**< \brief (ADC_CHDR) Channel 1 Disable */ +#define ADC_CHDR_CH2 (0x1u << 2) /**< \brief (ADC_CHDR) Channel 2 Disable */ +#define ADC_CHDR_CH3 (0x1u << 3) /**< \brief (ADC_CHDR) Channel 3 Disable */ +#define ADC_CHDR_CH4 (0x1u << 4) /**< \brief (ADC_CHDR) Channel 4 Disable */ +#define ADC_CHDR_CH5 (0x1u << 5) /**< \brief (ADC_CHDR) Channel 5 Disable */ +#define ADC_CHDR_CH6 (0x1u << 6) /**< \brief (ADC_CHDR) Channel 6 Disable */ +#define ADC_CHDR_CH7 (0x1u << 7) /**< \brief (ADC_CHDR) Channel 7 Disable */ +#define ADC_CHDR_CH8 (0x1u << 8) /**< \brief (ADC_CHDR) Channel 8 Disable */ +#define ADC_CHDR_CH9 (0x1u << 9) /**< \brief (ADC_CHDR) Channel 9 Disable */ +#define ADC_CHDR_CH10 (0x1u << 10) /**< \brief (ADC_CHDR) Channel 10 Disable */ +#define ADC_CHDR_CH11 (0x1u << 11) /**< \brief (ADC_CHDR) Channel 11 Disable */ +#define ADC_CHDR_CH12 (0x1u << 12) /**< \brief (ADC_CHDR) Channel 12 Disable */ +#define ADC_CHDR_CH13 (0x1u << 13) /**< \brief (ADC_CHDR) Channel 13 Disable */ +#define ADC_CHDR_CH14 (0x1u << 14) /**< \brief (ADC_CHDR) Channel 14 Disable */ +#define ADC_CHDR_CH15 (0x1u << 15) /**< \brief (ADC_CHDR) Channel 15 Disable */ +/* -------- ADC_CHSR : (ADC Offset: 0x18) Channel Status Register -------- */ +#define ADC_CHSR_CH0 (0x1u << 0) /**< \brief (ADC_CHSR) Channel 0 Status */ +#define ADC_CHSR_CH1 (0x1u << 1) /**< \brief (ADC_CHSR) Channel 1 Status */ +#define ADC_CHSR_CH2 (0x1u << 2) /**< \brief (ADC_CHSR) Channel 2 Status */ +#define ADC_CHSR_CH3 (0x1u << 3) /**< \brief (ADC_CHSR) Channel 3 Status */ +#define ADC_CHSR_CH4 (0x1u << 4) /**< \brief (ADC_CHSR) Channel 4 Status */ +#define ADC_CHSR_CH5 (0x1u << 5) /**< \brief (ADC_CHSR) Channel 5 Status */ +#define ADC_CHSR_CH6 (0x1u << 6) /**< \brief (ADC_CHSR) Channel 6 Status */ +#define ADC_CHSR_CH7 (0x1u << 7) /**< \brief (ADC_CHSR) Channel 7 Status */ +#define ADC_CHSR_CH8 (0x1u << 8) /**< \brief (ADC_CHSR) Channel 8 Status */ +#define ADC_CHSR_CH9 (0x1u << 9) /**< \brief (ADC_CHSR) Channel 9 Status */ +#define ADC_CHSR_CH10 (0x1u << 10) /**< \brief (ADC_CHSR) Channel 10 Status */ +#define ADC_CHSR_CH11 (0x1u << 11) /**< \brief (ADC_CHSR) Channel 11 Status */ +#define ADC_CHSR_CH12 (0x1u << 12) /**< \brief (ADC_CHSR) Channel 12 Status */ +#define ADC_CHSR_CH13 (0x1u << 13) /**< \brief (ADC_CHSR) Channel 13 Status */ +#define ADC_CHSR_CH14 (0x1u << 14) /**< \brief (ADC_CHSR) Channel 14 Status */ +#define ADC_CHSR_CH15 (0x1u << 15) /**< \brief (ADC_CHSR) Channel 15 Status */ +/* -------- ADC_LCDR : (ADC Offset: 0x20) Last Converted Data Register -------- */ +#define ADC_LCDR_LDATA_Pos 0 +#define ADC_LCDR_LDATA_Msk (0xfffu << ADC_LCDR_LDATA_Pos) /**< \brief (ADC_LCDR) Last Data Converted */ +#define ADC_LCDR_CHNB_Pos 12 +#define ADC_LCDR_CHNB_Msk (0xfu << ADC_LCDR_CHNB_Pos) /**< \brief (ADC_LCDR) Channel Number */ +/* -------- ADC_IER : (ADC Offset: 0x24) Interrupt Enable Register -------- */ +#define ADC_IER_EOC0 (0x1u << 0) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 0 */ +#define ADC_IER_EOC1 (0x1u << 1) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 1 */ +#define ADC_IER_EOC2 (0x1u << 2) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 2 */ +#define ADC_IER_EOC3 (0x1u << 3) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 3 */ +#define ADC_IER_EOC4 (0x1u << 4) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 4 */ +#define ADC_IER_EOC5 (0x1u << 5) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 5 */ +#define ADC_IER_EOC6 (0x1u << 6) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 6 */ +#define ADC_IER_EOC7 (0x1u << 7) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 7 */ +#define ADC_IER_EOC8 (0x1u << 8) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 8 */ +#define ADC_IER_EOC9 (0x1u << 9) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 9 */ +#define ADC_IER_EOC10 (0x1u << 10) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 10 */ +#define ADC_IER_EOC11 (0x1u << 11) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 11 */ +#define ADC_IER_EOC12 (0x1u << 12) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 12 */ +#define ADC_IER_EOC13 (0x1u << 13) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 13 */ +#define ADC_IER_EOC14 (0x1u << 14) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 14 */ +#define ADC_IER_EOC15 (0x1u << 15) /**< \brief (ADC_IER) End of Conversion Interrupt Enable 15 */ +#define ADC_IER_DRDY (0x1u << 24) /**< \brief (ADC_IER) Data Ready Interrupt Enable */ +#define ADC_IER_GOVRE (0x1u << 25) /**< \brief (ADC_IER) General Overrun Error Interrupt Enable */ +#define ADC_IER_COMPE (0x1u << 26) /**< \brief (ADC_IER) Comparison Event Interrupt Enable */ +#define ADC_IER_ENDRX (0x1u << 27) /**< \brief (ADC_IER) End of Receive Buffer Interrupt Enable */ +#define ADC_IER_RXBUFF (0x1u << 28) /**< \brief (ADC_IER) Receive Buffer Full Interrupt Enable */ +/* -------- ADC_IDR : (ADC Offset: 0x28) Interrupt Disable Register -------- */ +#define ADC_IDR_EOC0 (0x1u << 0) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 0 */ +#define ADC_IDR_EOC1 (0x1u << 1) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 1 */ +#define ADC_IDR_EOC2 (0x1u << 2) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 2 */ +#define ADC_IDR_EOC3 (0x1u << 3) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 3 */ +#define ADC_IDR_EOC4 (0x1u << 4) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 4 */ +#define ADC_IDR_EOC5 (0x1u << 5) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 5 */ +#define ADC_IDR_EOC6 (0x1u << 6) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 6 */ +#define ADC_IDR_EOC7 (0x1u << 7) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 7 */ +#define ADC_IDR_EOC8 (0x1u << 8) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 8 */ +#define ADC_IDR_EOC9 (0x1u << 9) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 9 */ +#define ADC_IDR_EOC10 (0x1u << 10) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 10 */ +#define ADC_IDR_EOC11 (0x1u << 11) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 11 */ +#define ADC_IDR_EOC12 (0x1u << 12) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 12 */ +#define ADC_IDR_EOC13 (0x1u << 13) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 13 */ +#define ADC_IDR_EOC14 (0x1u << 14) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 14 */ +#define ADC_IDR_EOC15 (0x1u << 15) /**< \brief (ADC_IDR) End of Conversion Interrupt Disable 15 */ +#define ADC_IDR_DRDY (0x1u << 24) /**< \brief (ADC_IDR) Data Ready Interrupt Disable */ +#define ADC_IDR_GOVRE (0x1u << 25) /**< \brief (ADC_IDR) General Overrun Error Interrupt Disable */ +#define ADC_IDR_COMPE (0x1u << 26) /**< \brief (ADC_IDR) Comparison Event Interrupt Disable */ +#define ADC_IDR_ENDRX (0x1u << 27) /**< \brief (ADC_IDR) End of Receive Buffer Interrupt Disable */ +#define ADC_IDR_RXBUFF (0x1u << 28) /**< \brief (ADC_IDR) Receive Buffer Full Interrupt Disable */ +/* -------- ADC_IMR : (ADC Offset: 0x2C) Interrupt Mask Register -------- */ +#define ADC_IMR_EOC0 (0x1u << 0) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 0 */ +#define ADC_IMR_EOC1 (0x1u << 1) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 1 */ +#define ADC_IMR_EOC2 (0x1u << 2) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 2 */ +#define ADC_IMR_EOC3 (0x1u << 3) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 3 */ +#define ADC_IMR_EOC4 (0x1u << 4) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 4 */ +#define ADC_IMR_EOC5 (0x1u << 5) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 5 */ +#define ADC_IMR_EOC6 (0x1u << 6) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 6 */ +#define ADC_IMR_EOC7 (0x1u << 7) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 7 */ +#define ADC_IMR_EOC8 (0x1u << 8) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 8 */ +#define ADC_IMR_EOC9 (0x1u << 9) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 9 */ +#define ADC_IMR_EOC10 (0x1u << 10) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 10 */ +#define ADC_IMR_EOC11 (0x1u << 11) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 11 */ +#define ADC_IMR_EOC12 (0x1u << 12) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 12 */ +#define ADC_IMR_EOC13 (0x1u << 13) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 13 */ +#define ADC_IMR_EOC14 (0x1u << 14) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 14 */ +#define ADC_IMR_EOC15 (0x1u << 15) /**< \brief (ADC_IMR) End of Conversion Interrupt Mask 15 */ +#define ADC_IMR_DRDY (0x1u << 24) /**< \brief (ADC_IMR) Data Ready Interrupt Mask */ +#define ADC_IMR_GOVRE (0x1u << 25) /**< \brief (ADC_IMR) General Overrun Error Interrupt Mask */ +#define ADC_IMR_COMPE (0x1u << 26) /**< \brief (ADC_IMR) Comparison Event Interrupt Mask */ +#define ADC_IMR_ENDRX (0x1u << 27) /**< \brief (ADC_IMR) End of Receive Buffer Interrupt Mask */ +#define ADC_IMR_RXBUFF (0x1u << 28) /**< \brief (ADC_IMR) Receive Buffer Full Interrupt Mask */ +/* -------- ADC_ISR : (ADC Offset: 0x30) Interrupt Status Register -------- */ +#define ADC_ISR_EOC0 (0x1u << 0) /**< \brief (ADC_ISR) End of Conversion 0 */ +#define ADC_ISR_EOC1 (0x1u << 1) /**< \brief (ADC_ISR) End of Conversion 1 */ +#define ADC_ISR_EOC2 (0x1u << 2) /**< \brief (ADC_ISR) End of Conversion 2 */ +#define ADC_ISR_EOC3 (0x1u << 3) /**< \brief (ADC_ISR) End of Conversion 3 */ +#define ADC_ISR_EOC4 (0x1u << 4) /**< \brief (ADC_ISR) End of Conversion 4 */ +#define ADC_ISR_EOC5 (0x1u << 5) /**< \brief (ADC_ISR) End of Conversion 5 */ +#define ADC_ISR_EOC6 (0x1u << 6) /**< \brief (ADC_ISR) End of Conversion 6 */ +#define ADC_ISR_EOC7 (0x1u << 7) /**< \brief (ADC_ISR) End of Conversion 7 */ +#define ADC_ISR_EOC8 (0x1u << 8) /**< \brief (ADC_ISR) End of Conversion 8 */ +#define ADC_ISR_EOC9 (0x1u << 9) /**< \brief (ADC_ISR) End of Conversion 9 */ +#define ADC_ISR_EOC10 (0x1u << 10) /**< \brief (ADC_ISR) End of Conversion 10 */ +#define ADC_ISR_EOC11 (0x1u << 11) /**< \brief (ADC_ISR) End of Conversion 11 */ +#define ADC_ISR_EOC12 (0x1u << 12) /**< \brief (ADC_ISR) End of Conversion 12 */ +#define ADC_ISR_EOC13 (0x1u << 13) /**< \brief (ADC_ISR) End of Conversion 13 */ +#define ADC_ISR_EOC14 (0x1u << 14) /**< \brief (ADC_ISR) End of Conversion 14 */ +#define ADC_ISR_EOC15 (0x1u << 15) /**< \brief (ADC_ISR) End of Conversion 15 */ +#define ADC_ISR_EOCAL (0x1u << 23) /**< \brief (ADC_ISR) End of Calibration Sequence */ +#define ADC_ISR_DRDY (0x1u << 24) /**< \brief (ADC_ISR) Data Ready */ +#define ADC_ISR_GOVRE (0x1u << 25) /**< \brief (ADC_ISR) General Overrun Error */ +#define ADC_ISR_COMPE (0x1u << 26) /**< \brief (ADC_ISR) Comparison Error */ +#define ADC_ISR_ENDRX (0x1u << 27) /**< \brief (ADC_ISR) End of RX Buffer */ +#define ADC_ISR_RXBUFF (0x1u << 28) /**< \brief (ADC_ISR) RX Buffer Full */ +/* -------- ADC_OVER : (ADC Offset: 0x3C) Overrun Status Register -------- */ +#define ADC_OVER_OVRE0 (0x1u << 0) /**< \brief (ADC_OVER) Overrun Error 0 */ +#define ADC_OVER_OVRE1 (0x1u << 1) /**< \brief (ADC_OVER) Overrun Error 1 */ +#define ADC_OVER_OVRE2 (0x1u << 2) /**< \brief (ADC_OVER) Overrun Error 2 */ +#define ADC_OVER_OVRE3 (0x1u << 3) /**< \brief (ADC_OVER) Overrun Error 3 */ +#define ADC_OVER_OVRE4 (0x1u << 4) /**< \brief (ADC_OVER) Overrun Error 4 */ +#define ADC_OVER_OVRE5 (0x1u << 5) /**< \brief (ADC_OVER) Overrun Error 5 */ +#define ADC_OVER_OVRE6 (0x1u << 6) /**< \brief (ADC_OVER) Overrun Error 6 */ +#define ADC_OVER_OVRE7 (0x1u << 7) /**< \brief (ADC_OVER) Overrun Error 7 */ +#define ADC_OVER_OVRE8 (0x1u << 8) /**< \brief (ADC_OVER) Overrun Error 8 */ +#define ADC_OVER_OVRE9 (0x1u << 9) /**< \brief (ADC_OVER) Overrun Error 9 */ +#define ADC_OVER_OVRE10 (0x1u << 10) /**< \brief (ADC_OVER) Overrun Error 10 */ +#define ADC_OVER_OVRE11 (0x1u << 11) /**< \brief (ADC_OVER) Overrun Error 11 */ +#define ADC_OVER_OVRE12 (0x1u << 12) /**< \brief (ADC_OVER) Overrun Error 12 */ +#define ADC_OVER_OVRE13 (0x1u << 13) /**< \brief (ADC_OVER) Overrun Error 13 */ +#define ADC_OVER_OVRE14 (0x1u << 14) /**< \brief (ADC_OVER) Overrun Error 14 */ +#define ADC_OVER_OVRE15 (0x1u << 15) /**< \brief (ADC_OVER) Overrun Error 15 */ +/* -------- ADC_EMR : (ADC Offset: 0x40) Extended Mode Register -------- */ +#define ADC_EMR_CMPMODE_Pos 0 +#define ADC_EMR_CMPMODE_Msk (0x3u << ADC_EMR_CMPMODE_Pos) /**< \brief (ADC_EMR) Comparison Mode */ +#define ADC_EMR_CMPMODE_LOW (0x0u << 0) /**< \brief (ADC_EMR) Generates an event when the converted data is lower than the low threshold of the window. */ +#define ADC_EMR_CMPMODE_HIGH (0x1u << 0) /**< \brief (ADC_EMR) Generates an event when the converted data is higher than the high threshold of the window. */ +#define ADC_EMR_CMPMODE_IN (0x2u << 0) /**< \brief (ADC_EMR) Generates an event when the converted data is in the comparison window. */ +#define ADC_EMR_CMPMODE_OUT (0x3u << 0) /**< \brief (ADC_EMR) Generates an event when the converted data is out of the comparison window. */ +#define ADC_EMR_CMPSEL_Pos 4 +#define ADC_EMR_CMPSEL_Msk (0xfu << ADC_EMR_CMPSEL_Pos) /**< \brief (ADC_EMR) Comparison Selected Channel */ +#define ADC_EMR_CMPSEL(value) ((ADC_EMR_CMPSEL_Msk & ((value) << ADC_EMR_CMPSEL_Pos))) +#define ADC_EMR_CMPALL (0x1u << 9) /**< \brief (ADC_EMR) Compare All Channels */ +#define ADC_EMR_TAG (0x1u << 24) /**< \brief (ADC_EMR) TAG of ADC_LDCR register */ +/* -------- ADC_CWR : (ADC Offset: 0x44) Compare Window Register -------- */ +#define ADC_CWR_LOWTHRES_Pos 0 +#define ADC_CWR_LOWTHRES_Msk (0xfffu << ADC_CWR_LOWTHRES_Pos) /**< \brief (ADC_CWR) Low Threshold */ +#define ADC_CWR_LOWTHRES(value) ((ADC_CWR_LOWTHRES_Msk & ((value) << ADC_CWR_LOWTHRES_Pos))) +#define ADC_CWR_HIGHTHRES_Pos 16 +#define ADC_CWR_HIGHTHRES_Msk (0xfffu << ADC_CWR_HIGHTHRES_Pos) /**< \brief (ADC_CWR) High Threshold */ +#define ADC_CWR_HIGHTHRES(value) ((ADC_CWR_HIGHTHRES_Msk & ((value) << ADC_CWR_HIGHTHRES_Pos))) +/* -------- ADC_CGR : (ADC Offset: 0x48) Channel Gain Register -------- */ +#define ADC_CGR_GAIN0_Pos 0 +#define ADC_CGR_GAIN0_Msk (0x3u << ADC_CGR_GAIN0_Pos) /**< \brief (ADC_CGR) Gain for channel 0 */ +#define ADC_CGR_GAIN0(value) ((ADC_CGR_GAIN0_Msk & ((value) << ADC_CGR_GAIN0_Pos))) +#define ADC_CGR_GAIN1_Pos 2 +#define ADC_CGR_GAIN1_Msk (0x3u << ADC_CGR_GAIN1_Pos) /**< \brief (ADC_CGR) Gain for channel 1 */ +#define ADC_CGR_GAIN1(value) ((ADC_CGR_GAIN1_Msk & ((value) << ADC_CGR_GAIN1_Pos))) +#define ADC_CGR_GAIN2_Pos 4 +#define ADC_CGR_GAIN2_Msk (0x3u << ADC_CGR_GAIN2_Pos) /**< \brief (ADC_CGR) Gain for channel 2 */ +#define ADC_CGR_GAIN2(value) ((ADC_CGR_GAIN2_Msk & ((value) << ADC_CGR_GAIN2_Pos))) +#define ADC_CGR_GAIN3_Pos 6 +#define ADC_CGR_GAIN3_Msk (0x3u << ADC_CGR_GAIN3_Pos) /**< \brief (ADC_CGR) Gain for channel 3 */ +#define ADC_CGR_GAIN3(value) ((ADC_CGR_GAIN3_Msk & ((value) << ADC_CGR_GAIN3_Pos))) +#define ADC_CGR_GAIN4_Pos 8 +#define ADC_CGR_GAIN4_Msk (0x3u << ADC_CGR_GAIN4_Pos) /**< \brief (ADC_CGR) Gain for channel 4 */ +#define ADC_CGR_GAIN4(value) ((ADC_CGR_GAIN4_Msk & ((value) << ADC_CGR_GAIN4_Pos))) +#define ADC_CGR_GAIN5_Pos 10 +#define ADC_CGR_GAIN5_Msk (0x3u << ADC_CGR_GAIN5_Pos) /**< \brief (ADC_CGR) Gain for channel 5 */ +#define ADC_CGR_GAIN5(value) ((ADC_CGR_GAIN5_Msk & ((value) << ADC_CGR_GAIN5_Pos))) +#define ADC_CGR_GAIN6_Pos 12 +#define ADC_CGR_GAIN6_Msk (0x3u << ADC_CGR_GAIN6_Pos) /**< \brief (ADC_CGR) Gain for channel 6 */ +#define ADC_CGR_GAIN6(value) ((ADC_CGR_GAIN6_Msk & ((value) << ADC_CGR_GAIN6_Pos))) +#define ADC_CGR_GAIN7_Pos 14 +#define ADC_CGR_GAIN7_Msk (0x3u << ADC_CGR_GAIN7_Pos) /**< \brief (ADC_CGR) Gain for channel 7 */ +#define ADC_CGR_GAIN7(value) ((ADC_CGR_GAIN7_Msk & ((value) << ADC_CGR_GAIN7_Pos))) +#define ADC_CGR_GAIN8_Pos 16 +#define ADC_CGR_GAIN8_Msk (0x3u << ADC_CGR_GAIN8_Pos) /**< \brief (ADC_CGR) Gain for channel 8 */ +#define ADC_CGR_GAIN8(value) ((ADC_CGR_GAIN8_Msk & ((value) << ADC_CGR_GAIN8_Pos))) +#define ADC_CGR_GAIN9_Pos 18 +#define ADC_CGR_GAIN9_Msk (0x3u << ADC_CGR_GAIN9_Pos) /**< \brief (ADC_CGR) Gain for channel 9 */ +#define ADC_CGR_GAIN9(value) ((ADC_CGR_GAIN9_Msk & ((value) << ADC_CGR_GAIN9_Pos))) +#define ADC_CGR_GAIN10_Pos 20 +#define ADC_CGR_GAIN10_Msk (0x3u << ADC_CGR_GAIN10_Pos) /**< \brief (ADC_CGR) Gain for channel 10 */ +#define ADC_CGR_GAIN10(value) ((ADC_CGR_GAIN10_Msk & ((value) << ADC_CGR_GAIN10_Pos))) +#define ADC_CGR_GAIN11_Pos 22 +#define ADC_CGR_GAIN11_Msk (0x3u << ADC_CGR_GAIN11_Pos) /**< \brief (ADC_CGR) Gain for channel 11 */ +#define ADC_CGR_GAIN11(value) ((ADC_CGR_GAIN11_Msk & ((value) << ADC_CGR_GAIN11_Pos))) +#define ADC_CGR_GAIN12_Pos 24 +#define ADC_CGR_GAIN12_Msk (0x3u << ADC_CGR_GAIN12_Pos) /**< \brief (ADC_CGR) Gain for channel 12 */ +#define ADC_CGR_GAIN12(value) ((ADC_CGR_GAIN12_Msk & ((value) << ADC_CGR_GAIN12_Pos))) +#define ADC_CGR_GAIN13_Pos 26 +#define ADC_CGR_GAIN13_Msk (0x3u << ADC_CGR_GAIN13_Pos) /**< \brief (ADC_CGR) Gain for channel 13 */ +#define ADC_CGR_GAIN13(value) ((ADC_CGR_GAIN13_Msk & ((value) << ADC_CGR_GAIN13_Pos))) +#define ADC_CGR_GAIN14_Pos 28 +#define ADC_CGR_GAIN14_Msk (0x3u << ADC_CGR_GAIN14_Pos) /**< \brief (ADC_CGR) Gain for channel 14 */ +#define ADC_CGR_GAIN14(value) ((ADC_CGR_GAIN14_Msk & ((value) << ADC_CGR_GAIN14_Pos))) +#define ADC_CGR_GAIN15_Pos 30 +#define ADC_CGR_GAIN15_Msk (0x3u << ADC_CGR_GAIN15_Pos) /**< \brief (ADC_CGR) Gain for channel 15 */ +#define ADC_CGR_GAIN15(value) ((ADC_CGR_GAIN15_Msk & ((value) << ADC_CGR_GAIN15_Pos))) +/* -------- ADC_COR : (ADC Offset: 0x4C) Channel Offset Register -------- */ +#define ADC_COR_OFF0 (0x1u << 0) /**< \brief (ADC_COR) Offset for channel 0 */ +#define ADC_COR_OFF1 (0x1u << 1) /**< \brief (ADC_COR) Offset for channel 1 */ +#define ADC_COR_OFF2 (0x1u << 2) /**< \brief (ADC_COR) Offset for channel 2 */ +#define ADC_COR_OFF3 (0x1u << 3) /**< \brief (ADC_COR) Offset for channel 3 */ +#define ADC_COR_OFF4 (0x1u << 4) /**< \brief (ADC_COR) Offset for channel 4 */ +#define ADC_COR_OFF5 (0x1u << 5) /**< \brief (ADC_COR) Offset for channel 5 */ +#define ADC_COR_OFF6 (0x1u << 6) /**< \brief (ADC_COR) Offset for channel 6 */ +#define ADC_COR_OFF7 (0x1u << 7) /**< \brief (ADC_COR) Offset for channel 7 */ +#define ADC_COR_OFF8 (0x1u << 8) /**< \brief (ADC_COR) Offset for channel 8 */ +#define ADC_COR_OFF9 (0x1u << 9) /**< \brief (ADC_COR) Offset for channel 9 */ +#define ADC_COR_OFF10 (0x1u << 10) /**< \brief (ADC_COR) Offset for channel 10 */ +#define ADC_COR_OFF11 (0x1u << 11) /**< \brief (ADC_COR) Offset for channel 11 */ +#define ADC_COR_OFF12 (0x1u << 12) /**< \brief (ADC_COR) Offset for channel 12 */ +#define ADC_COR_OFF13 (0x1u << 13) /**< \brief (ADC_COR) Offset for channel 13 */ +#define ADC_COR_OFF14 (0x1u << 14) /**< \brief (ADC_COR) Offset for channel 14 */ +#define ADC_COR_OFF15 (0x1u << 15) /**< \brief (ADC_COR) Offset for channel 15 */ +#define ADC_COR_DIFF0 (0x1u << 16) /**< \brief (ADC_COR) Differential inputs for channel 0 */ +#define ADC_COR_DIFF1 (0x1u << 17) /**< \brief (ADC_COR) Differential inputs for channel 1 */ +#define ADC_COR_DIFF2 (0x1u << 18) /**< \brief (ADC_COR) Differential inputs for channel 2 */ +#define ADC_COR_DIFF3 (0x1u << 19) /**< \brief (ADC_COR) Differential inputs for channel 3 */ +#define ADC_COR_DIFF4 (0x1u << 20) /**< \brief (ADC_COR) Differential inputs for channel 4 */ +#define ADC_COR_DIFF5 (0x1u << 21) /**< \brief (ADC_COR) Differential inputs for channel 5 */ +#define ADC_COR_DIFF6 (0x1u << 22) /**< \brief (ADC_COR) Differential inputs for channel 6 */ +#define ADC_COR_DIFF7 (0x1u << 23) /**< \brief (ADC_COR) Differential inputs for channel 7 */ +#define ADC_COR_DIFF8 (0x1u << 24) /**< \brief (ADC_COR) Differential inputs for channel 8 */ +#define ADC_COR_DIFF9 (0x1u << 25) /**< \brief (ADC_COR) Differential inputs for channel 9 */ +#define ADC_COR_DIFF10 (0x1u << 26) /**< \brief (ADC_COR) Differential inputs for channel 10 */ +#define ADC_COR_DIFF11 (0x1u << 27) /**< \brief (ADC_COR) Differential inputs for channel 11 */ +#define ADC_COR_DIFF12 (0x1u << 28) /**< \brief (ADC_COR) Differential inputs for channel 12 */ +#define ADC_COR_DIFF13 (0x1u << 29) /**< \brief (ADC_COR) Differential inputs for channel 13 */ +#define ADC_COR_DIFF14 (0x1u << 30) /**< \brief (ADC_COR) Differential inputs for channel 14 */ +#define ADC_COR_DIFF15 (0x1u << 31) /**< \brief (ADC_COR) Differential inputs for channel 15 */ +/* -------- ADC_CDR[16] : (ADC Offset: 0x50) Channel Data Register -------- */ +#define ADC_CDR_DATA_Pos 0 +#define ADC_CDR_DATA_Msk (0xfffu << ADC_CDR_DATA_Pos) /**< \brief (ADC_CDR[16]) Converted Data */ +/* -------- ADC_ACR : (ADC Offset: 0x94) Analog Control Register -------- */ +#define ADC_ACR_TSON (0x1u << 4) /**< \brief (ADC_ACR) Temperature Sensor On */ +#define ADC_ACR_IBCTL_Pos 8 +#define ADC_ACR_IBCTL_Msk (0x3u << ADC_ACR_IBCTL_Pos) /**< \brief (ADC_ACR) ADC Bias Current Control */ +#define ADC_ACR_IBCTL(value) ((ADC_ACR_IBCTL_Msk & ((value) << ADC_ACR_IBCTL_Pos))) +/* -------- ADC_WPMR : (ADC Offset: 0xE4) Write Protect Mode Register -------- */ +#define ADC_WPMR_WPEN (0x1u << 0) /**< \brief (ADC_WPMR) Write Protect Enable */ +#define ADC_WPMR_WPKEY_Pos 8 +#define ADC_WPMR_WPKEY_Msk (0xffffffu << ADC_WPMR_WPKEY_Pos) /**< \brief (ADC_WPMR) Write Protect KEY */ +#define ADC_WPMR_WPKEY(value) ((ADC_WPMR_WPKEY_Msk & ((value) << ADC_WPMR_WPKEY_Pos))) +/* -------- ADC_WPSR : (ADC Offset: 0xE8) Write Protect Status Register -------- */ +#define ADC_WPSR_WPVS (0x1u << 0) /**< \brief (ADC_WPSR) Write Protect Violation Status */ +#define ADC_WPSR_WPVSRC_Pos 8 +#define ADC_WPSR_WPVSRC_Msk (0xffffu << ADC_WPSR_WPVSRC_Pos) /**< \brief (ADC_WPSR) Write Protect Violation Source */ +/* -------- ADC_RPR : (ADC Offset: 0x100) Receive Pointer Register -------- */ +#define ADC_RPR_RXPTR_Pos 0 +#define ADC_RPR_RXPTR_Msk (0xffffffffu << ADC_RPR_RXPTR_Pos) /**< \brief (ADC_RPR) Receive Pointer Register */ +#define ADC_RPR_RXPTR(value) ((ADC_RPR_RXPTR_Msk & ((value) << ADC_RPR_RXPTR_Pos))) +/* -------- ADC_RCR : (ADC Offset: 0x104) Receive Counter Register -------- */ +#define ADC_RCR_RXCTR_Pos 0 +#define ADC_RCR_RXCTR_Msk (0xffffu << ADC_RCR_RXCTR_Pos) /**< \brief (ADC_RCR) Receive Counter Register */ +#define ADC_RCR_RXCTR(value) ((ADC_RCR_RXCTR_Msk & ((value) << ADC_RCR_RXCTR_Pos))) +/* -------- ADC_RNPR : (ADC Offset: 0x110) Receive Next Pointer Register -------- */ +#define ADC_RNPR_RXNPTR_Pos 0 +#define ADC_RNPR_RXNPTR_Msk (0xffffffffu << ADC_RNPR_RXNPTR_Pos) /**< \brief (ADC_RNPR) Receive Next Pointer */ +#define ADC_RNPR_RXNPTR(value) ((ADC_RNPR_RXNPTR_Msk & ((value) << ADC_RNPR_RXNPTR_Pos))) +/* -------- ADC_RNCR : (ADC Offset: 0x114) Receive Next Counter Register -------- */ +#define ADC_RNCR_RXNCTR_Pos 0 +#define ADC_RNCR_RXNCTR_Msk (0xffffu << ADC_RNCR_RXNCTR_Pos) /**< \brief (ADC_RNCR) Receive Next Counter */ +#define ADC_RNCR_RXNCTR(value) ((ADC_RNCR_RXNCTR_Msk & ((value) << ADC_RNCR_RXNCTR_Pos))) +/* -------- ADC_PTCR : (ADC Offset: 0x120) Transfer Control Register -------- */ +#define ADC_PTCR_RXTEN (0x1u << 0) /**< \brief (ADC_PTCR) Receiver Transfer Enable */ +#define ADC_PTCR_RXTDIS (0x1u << 1) /**< \brief (ADC_PTCR) Receiver Transfer Disable */ +#define ADC_PTCR_TXTEN (0x1u << 8) /**< \brief (ADC_PTCR) Transmitter Transfer Enable */ +#define ADC_PTCR_TXTDIS (0x1u << 9) /**< \brief (ADC_PTCR) Transmitter Transfer Disable */ +/* -------- ADC_PTSR : (ADC Offset: 0x124) Transfer Status Register -------- */ +#define ADC_PTSR_RXTEN (0x1u << 0) /**< \brief (ADC_PTSR) Receiver Transfer Enable */ +#define ADC_PTSR_TXTEN (0x1u << 8) /**< \brief (ADC_PTSR) Transmitter Transfer Enable */ + +/*@}*/ + + +#endif /* _SAM4S_ADC_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_chipid.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_chipid.h new file mode 100644 index 0000000..2644ab8 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_chipid.h
@@ -0,0 +1,162 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_CHIPID_COMPONENT_ +#define _SAM4S_CHIPID_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Chip Identifier */ +/* ============================================================================= */ +/** \addtogroup SAM4S_CHIPID Chip Identifier */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Chipid hardware registers */ +typedef struct { + RoReg CHIPID_CIDR; /**< \brief (Chipid Offset: 0x0) Chip ID Register */ + RoReg CHIPID_EXID; /**< \brief (Chipid Offset: 0x4) Chip ID Extension Register */ +} Chipid; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- CHIPID_CIDR : (CHIPID Offset: 0x0) Chip ID Register -------- */ +#define CHIPID_CIDR_VERSION_Pos 0 +#define CHIPID_CIDR_VERSION_Msk (0x1fu << CHIPID_CIDR_VERSION_Pos) /**< \brief (CHIPID_CIDR) Version of the Device */ +#define CHIPID_CIDR_EPROC_Pos 5 +#define CHIPID_CIDR_EPROC_Msk (0x7u << CHIPID_CIDR_EPROC_Pos) /**< \brief (CHIPID_CIDR) Embedded Processor */ +#define CHIPID_CIDR_EPROC_ARM946ES (0x1u << 5) /**< \brief (CHIPID_CIDR) ARM946ES */ +#define CHIPID_CIDR_EPROC_ARM7TDMI (0x2u << 5) /**< \brief (CHIPID_CIDR) ARM7TDMI */ +#define CHIPID_CIDR_EPROC_CM3 (0x3u << 5) /**< \brief (CHIPID_CIDR) Cortex-M3 */ +#define CHIPID_CIDR_EPROC_ARM920T (0x4u << 5) /**< \brief (CHIPID_CIDR) ARM920T */ +#define CHIPID_CIDR_EPROC_ARM926EJS (0x5u << 5) /**< \brief (CHIPID_CIDR) ARM926EJS */ +#define CHIPID_CIDR_EPROC_CA5 (0x6u << 5) /**< \brief (CHIPID_CIDR) Cortex-A5 */ +#define CHIPID_CIDR_EPROC_CM4 (0x7u << 5) /**< \brief (CHIPID_CIDR) Cortex-M4 */ +#define CHIPID_CIDR_NVPSIZ_Pos 8 +#define CHIPID_CIDR_NVPSIZ_Msk (0xfu << CHIPID_CIDR_NVPSIZ_Pos) /**< \brief (CHIPID_CIDR) Nonvolatile Program Memory Size */ +#define CHIPID_CIDR_NVPSIZ_NONE (0x0u << 8) /**< \brief (CHIPID_CIDR) None */ +#define CHIPID_CIDR_NVPSIZ_8K (0x1u << 8) /**< \brief (CHIPID_CIDR) 8K bytes */ +#define CHIPID_CIDR_NVPSIZ_16K (0x2u << 8) /**< \brief (CHIPID_CIDR) 16K bytes */ +#define CHIPID_CIDR_NVPSIZ_32K (0x3u << 8) /**< \brief (CHIPID_CIDR) 32K bytes */ +#define CHIPID_CIDR_NVPSIZ_64K (0x5u << 8) /**< \brief (CHIPID_CIDR) 64K bytes */ +#define CHIPID_CIDR_NVPSIZ_128K (0x7u << 8) /**< \brief (CHIPID_CIDR) 128K bytes */ +#define CHIPID_CIDR_NVPSIZ_256K (0x9u << 8) /**< \brief (CHIPID_CIDR) 256K bytes */ +#define CHIPID_CIDR_NVPSIZ_512K (0xAu << 8) /**< \brief (CHIPID_CIDR) 512K bytes */ +#define CHIPID_CIDR_NVPSIZ_1024K (0xCu << 8) /**< \brief (CHIPID_CIDR) 1024K bytes */ +#define CHIPID_CIDR_NVPSIZ_2048K (0xEu << 8) /**< \brief (CHIPID_CIDR) 2048K bytes */ +#define CHIPID_CIDR_NVPSIZ2_Pos 12 +#define CHIPID_CIDR_NVPSIZ2_Msk (0xfu << CHIPID_CIDR_NVPSIZ2_Pos) /**< \brief (CHIPID_CIDR) */ +#define CHIPID_CIDR_NVPSIZ2_NONE (0x0u << 12) /**< \brief (CHIPID_CIDR) None */ +#define CHIPID_CIDR_NVPSIZ2_8K (0x1u << 12) /**< \brief (CHIPID_CIDR) 8K bytes */ +#define CHIPID_CIDR_NVPSIZ2_16K (0x2u << 12) /**< \brief (CHIPID_CIDR) 16K bytes */ +#define CHIPID_CIDR_NVPSIZ2_32K (0x3u << 12) /**< \brief (CHIPID_CIDR) 32K bytes */ +#define CHIPID_CIDR_NVPSIZ2_64K (0x5u << 12) /**< \brief (CHIPID_CIDR) 64K bytes */ +#define CHIPID_CIDR_NVPSIZ2_128K (0x7u << 12) /**< \brief (CHIPID_CIDR) 128K bytes */ +#define CHIPID_CIDR_NVPSIZ2_256K (0x9u << 12) /**< \brief (CHIPID_CIDR) 256K bytes */ +#define CHIPID_CIDR_NVPSIZ2_512K (0xAu << 12) /**< \brief (CHIPID_CIDR) 512K bytes */ +#define CHIPID_CIDR_NVPSIZ2_1024K (0xCu << 12) /**< \brief (CHIPID_CIDR) 1024K bytes */ +#define CHIPID_CIDR_NVPSIZ2_2048K (0xEu << 12) /**< \brief (CHIPID_CIDR) 2048K bytes */ +#define CHIPID_CIDR_SRAMSIZ_Pos 16 +#define CHIPID_CIDR_SRAMSIZ_Msk (0xfu << CHIPID_CIDR_SRAMSIZ_Pos) /**< \brief (CHIPID_CIDR) Internal SRAM Size */ +#define CHIPID_CIDR_SRAMSIZ_48K (0x0u << 16) /**< \brief (CHIPID_CIDR) 48K bytes */ +#define CHIPID_CIDR_SRAMSIZ_1K (0x1u << 16) /**< \brief (CHIPID_CIDR) 1K bytes */ +#define CHIPID_CIDR_SRAMSIZ_2K (0x2u << 16) /**< \brief (CHIPID_CIDR) 2K bytes */ +#define CHIPID_CIDR_SRAMSIZ_6K (0x3u << 16) /**< \brief (CHIPID_CIDR) 6K bytes */ +#define CHIPID_CIDR_SRAMSIZ_24K (0x4u << 16) /**< \brief (CHIPID_CIDR) 24K bytes */ +#define CHIPID_CIDR_SRAMSIZ_4K (0x5u << 16) /**< \brief (CHIPID_CIDR) 4K bytes */ +#define CHIPID_CIDR_SRAMSIZ_80K (0x6u << 16) /**< \brief (CHIPID_CIDR) 80K bytes */ +#define CHIPID_CIDR_SRAMSIZ_160K (0x7u << 16) /**< \brief (CHIPID_CIDR) 160K bytes */ +#define CHIPID_CIDR_SRAMSIZ_8K (0x8u << 16) /**< \brief (CHIPID_CIDR) 8K bytes */ +#define CHIPID_CIDR_SRAMSIZ_16K (0x9u << 16) /**< \brief (CHIPID_CIDR) 16K bytes */ +#define CHIPID_CIDR_SRAMSIZ_32K (0xAu << 16) /**< \brief (CHIPID_CIDR) 32K bytes */ +#define CHIPID_CIDR_SRAMSIZ_64K (0xBu << 16) /**< \brief (CHIPID_CIDR) 64K bytes */ +#define CHIPID_CIDR_SRAMSIZ_128K (0xCu << 16) /**< \brief (CHIPID_CIDR) 128K bytes */ +#define CHIPID_CIDR_SRAMSIZ_256K (0xDu << 16) /**< \brief (CHIPID_CIDR) 256K bytes */ +#define CHIPID_CIDR_SRAMSIZ_96K (0xEu << 16) /**< \brief (CHIPID_CIDR) 96K bytes */ +#define CHIPID_CIDR_SRAMSIZ_512K (0xFu << 16) /**< \brief (CHIPID_CIDR) 512K bytes */ +#define CHIPID_CIDR_ARCH_Pos 20 +#define CHIPID_CIDR_ARCH_Msk (0xffu << CHIPID_CIDR_ARCH_Pos) /**< \brief (CHIPID_CIDR) Architecture Identifier */ +#define CHIPID_CIDR_ARCH_AT91SAM9xx (0x19u << 20) /**< \brief (CHIPID_CIDR) AT91SAM9xx Series */ +#define CHIPID_CIDR_ARCH_AT91SAM9XExx (0x29u << 20) /**< \brief (CHIPID_CIDR) AT91SAM9XExx Series */ +#define CHIPID_CIDR_ARCH_AT91x34 (0x34u << 20) /**< \brief (CHIPID_CIDR) AT91x34 Series */ +#define CHIPID_CIDR_ARCH_CAP7 (0x37u << 20) /**< \brief (CHIPID_CIDR) CAP7 Series */ +#define CHIPID_CIDR_ARCH_CAP9 (0x39u << 20) /**< \brief (CHIPID_CIDR) CAP9 Series */ +#define CHIPID_CIDR_ARCH_CAP11 (0x3Bu << 20) /**< \brief (CHIPID_CIDR) CAP11 Series */ +#define CHIPID_CIDR_ARCH_AT91x40 (0x40u << 20) /**< \brief (CHIPID_CIDR) AT91x40 Series */ +#define CHIPID_CIDR_ARCH_AT91x42 (0x42u << 20) /**< \brief (CHIPID_CIDR) AT91x42 Series */ +#define CHIPID_CIDR_ARCH_AT91x55 (0x55u << 20) /**< \brief (CHIPID_CIDR) AT91x55 Series */ +#define CHIPID_CIDR_ARCH_AT91SAM7Axx (0x60u << 20) /**< \brief (CHIPID_CIDR) AT91SAM7Axx Series */ +#define CHIPID_CIDR_ARCH_AT91SAM7AQxx (0x61u << 20) /**< \brief (CHIPID_CIDR) AT91SAM7AQxx Series */ +#define CHIPID_CIDR_ARCH_AT91x63 (0x63u << 20) /**< \brief (CHIPID_CIDR) AT91x63 Series */ +#define CHIPID_CIDR_ARCH_AT91SAM7Sxx (0x70u << 20) /**< \brief (CHIPID_CIDR) AT91SAM7Sxx Series */ +#define CHIPID_CIDR_ARCH_AT91SAM7XCxx (0x71u << 20) /**< \brief (CHIPID_CIDR) AT91SAM7XCxx Series */ +#define CHIPID_CIDR_ARCH_AT91SAM7SExx (0x72u << 20) /**< \brief (CHIPID_CIDR) AT91SAM7SExx Series */ +#define CHIPID_CIDR_ARCH_AT91SAM7Lxx (0x73u << 20) /**< \brief (CHIPID_CIDR) AT91SAM7Lxx Series */ +#define CHIPID_CIDR_ARCH_AT91SAM7Xxx (0x75u << 20) /**< \brief (CHIPID_CIDR) AT91SAM7Xxx Series */ +#define CHIPID_CIDR_ARCH_AT91SAM7SLxx (0x76u << 20) /**< \brief (CHIPID_CIDR) AT91SAM7SLxx Series */ +#define CHIPID_CIDR_ARCH_SAM3UxC (0x80u << 20) /**< \brief (CHIPID_CIDR) SAM3UxC Series (100-pin version) */ +#define CHIPID_CIDR_ARCH_SAM3UxE (0x81u << 20) /**< \brief (CHIPID_CIDR) SAM3UxE Series (144-pin version) */ +#define CHIPID_CIDR_ARCH_SAM3ASAM4AxC (0x83u << 20) /**< \brief (CHIPID_CIDR) SAM3AxC or SAM4AxC Series (100-pin version) */ +#define CHIPID_CIDR_ARCH_SAM3XSAM4XxC (0x84u << 20) /**< \brief (CHIPID_CIDR) SAM3XxCor SAM4XxC Series (100-pin version) */ +#define CHIPID_CIDR_ARCH_SAM3XSAM4XxE (0x85u << 20) /**< \brief (CHIPID_CIDR) SAM3XxEor SAM4XxE Series (144-pin version) */ +#define CHIPID_CIDR_ARCH_SAM3XSAM4XxG (0x86u << 20) /**< \brief (CHIPID_CIDR) SAM3XxGor or SAM4XxG Series (208/217-pin version) */ +#define CHIPID_CIDR_ARCH_SAM3SSAM4SxA (0x88u << 20) /**< \brief (CHIPID_CIDR) SAM3SxA or SAM4SxA Series (48-pin version) */ +#define CHIPID_CIDR_ARCH_SAM3SSAM4SxB (0x89u << 20) /**< \brief (CHIPID_CIDR) SAM3SxBor SAM4SxB Series (64-pin version) */ +#define CHIPID_CIDR_ARCH_SAM3SSAM4SxC (0x8Au << 20) /**< \brief (CHIPID_CIDR) SAM3SxCor SAM4SxC Series (100-pin version) */ +#define CHIPID_CIDR_ARCH_AT91x92 (0x92u << 20) /**< \brief (CHIPID_CIDR) AT91x92 Series */ +#define CHIPID_CIDR_ARCH_SAM3NxA (0x93u << 20) /**< \brief (CHIPID_CIDR) SAM3NxA Series (48-pin version) */ +#define CHIPID_CIDR_ARCH_SAM3NxB (0x94u << 20) /**< \brief (CHIPID_CIDR) SAM3NxB Series (64-pin version) */ +#define CHIPID_CIDR_ARCH_SAM3NxC (0x95u << 20) /**< \brief (CHIPID_CIDR) SAM3NxC Series (100-pin version) */ +#define CHIPID_CIDR_ARCH_SAM3SDxB (0x99u << 20) /**< \brief (CHIPID_CIDR) SAM3SDxB Series (64-pin version) */ +#define CHIPID_CIDR_ARCH_SAM3SDxC (0x9Au << 20) /**< \brief (CHIPID_CIDR) SAM3SDxC Series (100-pin version) */ +#define CHIPID_CIDR_ARCH_SAM5A (0xA5u << 20) /**< \brief (CHIPID_CIDR) SAM5A */ +#define CHIPID_CIDR_ARCH_AT75Cxx (0xF0u << 20) /**< \brief (CHIPID_CIDR) AT75Cxx Series */ +#define CHIPID_CIDR_NVPTYP_Pos 28 +#define CHIPID_CIDR_NVPTYP_Msk (0x7u << CHIPID_CIDR_NVPTYP_Pos) /**< \brief (CHIPID_CIDR) Nonvolatile Program Memory Type */ +#define CHIPID_CIDR_NVPTYP_ROM (0x0u << 28) /**< \brief (CHIPID_CIDR) ROM */ +#define CHIPID_CIDR_NVPTYP_ROMLESS (0x1u << 28) /**< \brief (CHIPID_CIDR) ROMless or on-chip Flash */ +#define CHIPID_CIDR_NVPTYP_FLASH (0x2u << 28) /**< \brief (CHIPID_CIDR) Embedded Flash Memory */ +#define CHIPID_CIDR_NVPTYP_ROM_FLASH (0x3u << 28) /**< \brief (CHIPID_CIDR) ROM and Embedded Flash MemoryNVPSIZ is ROM size NVPSIZ2 is Flash size */ +#define CHIPID_CIDR_NVPTYP_SRAM (0x4u << 28) /**< \brief (CHIPID_CIDR) SRAM emulating ROM */ +#define CHIPID_CIDR_EXT (0x1u << 31) /**< \brief (CHIPID_CIDR) Extension Flag */ +/* -------- CHIPID_EXID : (CHIPID Offset: 0x4) Chip ID Extension Register -------- */ +#define CHIPID_EXID_EXID_Pos 0 +#define CHIPID_EXID_EXID_Msk (0xffffffffu << CHIPID_EXID_EXID_Pos) /**< \brief (CHIPID_EXID) Chip ID Extension */ + +/*@}*/ + + +#endif /* _SAM4S_CHIPID_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_crccu.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_crccu.h new file mode 100644 index 0000000..e320b01 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_crccu.h
@@ -0,0 +1,117 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_CRCCU_COMPONENT_ +#define _SAM4S_CRCCU_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Cyclic Redundancy Check Calculation Unit */ +/* ============================================================================= */ +/** \addtogroup SAM4S_CRCCU Cyclic Redundancy Check Calculation Unit */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Crccu hardware registers */ +typedef struct { + RwReg CRCCU_DSCR; /**< \brief (Crccu Offset: 0x00000000) CRCCU Descriptor Base Register */ + RoReg Reserved1[1]; + WoReg CRCCU_DMA_EN; /**< \brief (Crccu Offset: 0x00000008) CRCCU DMA Enable Register */ + WoReg CRCCU_DMA_DIS; /**< \brief (Crccu Offset: 0x0000000C) CRCCU DMA Disable Register */ + RoReg CRCCU_DMA_SR; /**< \brief (Crccu Offset: 0x00000010) CRCCU DMA Status Register */ + WoReg CRCCU_DMA_IER; /**< \brief (Crccu Offset: 0x00000014) CRCCU DMA Interrupt Enable Register */ + WoReg CRCCU_DMA_IDR; /**< \brief (Crccu Offset: 0x00000018) CRCCU DMA Interrupt Disable Register */ + RoReg CRCCU_DMA_IMR; /**< \brief (Crccu Offset: 0x0000001C) CRCCU DMA Interrupt Mask Register */ + RoReg CRCCU_DMA_ISR; /**< \brief (Crccu Offset: 0x00000020) CRCCU DMA Interrupt Status Register */ + RoReg Reserved2[4]; + WoReg CRCCU_CR; /**< \brief (Crccu Offset: 0x00000034) CRCCU Control Register */ + RwReg CRCCU_MR; /**< \brief (Crccu Offset: 0x00000038) CRCCU Mode Register */ + RoReg CRCCU_SR; /**< \brief (Crccu Offset: 0x0000003C) CRCCU Status Register */ + WoReg CRCCU_IER; /**< \brief (Crccu Offset: 0x00000040) CRCCU Interrupt Enable Register */ + WoReg CRCCU_IDR; /**< \brief (Crccu Offset: 0x00000044) CRCCU Interrupt Disable Register */ + RoReg CRCCU_IMR; /**< \brief (Crccu Offset: 0x00000048) CRCCU Interrupt Mask Register */ + RoReg CRCCU_ISR; /**< \brief (Crccu Offset: 0x0000004C) CRCCU Interrupt Status Register */ +} Crccu; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- CRCCU_DSCR : (CRCCU Offset: 0x00000000) CRCCU Descriptor Base Register -------- */ +#define CRCCU_DSCR_DSCR_Pos 9 +#define CRCCU_DSCR_DSCR_Msk (0x7fffffu << CRCCU_DSCR_DSCR_Pos) /**< \brief (CRCCU_DSCR) Descriptor Base Address */ +#define CRCCU_DSCR_DSCR(value) ((CRCCU_DSCR_DSCR_Msk & ((value) << CRCCU_DSCR_DSCR_Pos))) +/* -------- CRCCU_DMA_EN : (CRCCU Offset: 0x00000008) CRCCU DMA Enable Register -------- */ +#define CRCCU_DMA_EN_DMAEN (0x1u << 0) /**< \brief (CRCCU_DMA_EN) DMA Enable Register */ +/* -------- CRCCU_DMA_DIS : (CRCCU Offset: 0x0000000C) CRCCU DMA Disable Register -------- */ +#define CRCCU_DMA_DIS_DMADIS (0x1u << 0) /**< \brief (CRCCU_DMA_DIS) DMA Disable Register */ +/* -------- CRCCU_DMA_SR : (CRCCU Offset: 0x00000010) CRCCU DMA Status Register -------- */ +#define CRCCU_DMA_SR_DMASR (0x1u << 0) /**< \brief (CRCCU_DMA_SR) DMA Status Register */ +/* -------- CRCCU_DMA_IER : (CRCCU Offset: 0x00000014) CRCCU DMA Interrupt Enable Register -------- */ +#define CRCCU_DMA_IER_DMAIER (0x1u << 0) /**< \brief (CRCCU_DMA_IER) Interrupt Enable register */ +/* -------- CRCCU_DMA_IDR : (CRCCU Offset: 0x00000018) CRCCU DMA Interrupt Disable Register -------- */ +#define CRCCU_DMA_IDR_DMAIDR (0x1u << 0) /**< \brief (CRCCU_DMA_IDR) Interrupt Disable register */ +/* -------- CRCCU_DMA_IMR : (CRCCU Offset: 0x0000001C) CRCCU DMA Interrupt Mask Register -------- */ +#define CRCCU_DMA_IMR_DMAIMR (0x1u << 0) /**< \brief (CRCCU_DMA_IMR) Interrupt Mask Register */ +/* -------- CRCCU_DMA_ISR : (CRCCU Offset: 0x00000020) CRCCU DMA Interrupt Status Register -------- */ +#define CRCCU_DMA_ISR_DMAISR (0x1u << 0) /**< \brief (CRCCU_DMA_ISR) Interrupt Status register */ +/* -------- CRCCU_CR : (CRCCU Offset: 0x00000034) CRCCU Control Register -------- */ +#define CRCCU_CR_RESET (0x1u << 0) /**< \brief (CRCCU_CR) CRC Computation Reset */ +/* -------- CRCCU_MR : (CRCCU Offset: 0x00000038) CRCCU Mode Register -------- */ +#define CRCCU_MR_ENABLE (0x1u << 0) /**< \brief (CRCCU_MR) CRC Enable */ +#define CRCCU_MR_COMPARE (0x1u << 1) /**< \brief (CRCCU_MR) CRC Compare */ +#define CRCCU_MR_PTYPE_Pos 2 +#define CRCCU_MR_PTYPE_Msk (0x3u << CRCCU_MR_PTYPE_Pos) /**< \brief (CRCCU_MR) Primitive Polynomial */ +#define CRCCU_MR_PTYPE_CCITT8023 (0x0u << 2) /**< \brief (CRCCU_MR) Polynom 0x04C11DB7 */ +#define CRCCU_MR_PTYPE_CASTAGNOLI (0x1u << 2) /**< \brief (CRCCU_MR) Polynom 0x1EDC6F41 */ +#define CRCCU_MR_PTYPE_CCITT16 (0x2u << 2) /**< \brief (CRCCU_MR) Polynom 0x1021 */ +#define CRCCU_MR_DIVIDER_Pos 4 +#define CRCCU_MR_DIVIDER_Msk (0xfu << CRCCU_MR_DIVIDER_Pos) /**< \brief (CRCCU_MR) Request Divider */ +#define CRCCU_MR_DIVIDER(value) ((CRCCU_MR_DIVIDER_Msk & ((value) << CRCCU_MR_DIVIDER_Pos))) +/* -------- CRCCU_SR : (CRCCU Offset: 0x0000003C) CRCCU Status Register -------- */ +#define CRCCU_SR_CRC_Pos 0 +#define CRCCU_SR_CRC_Msk (0xffffffffu << CRCCU_SR_CRC_Pos) /**< \brief (CRCCU_SR) Cyclic Redundancy Check Value */ +/* -------- CRCCU_IER : (CRCCU Offset: 0x00000040) CRCCU Interrupt Enable Register -------- */ +#define CRCCU_IER_ERRIER (0x1u << 0) /**< \brief (CRCCU_IER) CRC Error Interrupt Enable */ +/* -------- CRCCU_IDR : (CRCCU Offset: 0x00000044) CRCCU Interrupt Disable Register -------- */ +#define CRCCU_IDR_ERRIDR (0x1u << 0) /**< \brief (CRCCU_IDR) CRC Error Interrupt Disable */ +/* -------- CRCCU_IMR : (CRCCU Offset: 0x00000048) CRCCU Interrupt Mask Register -------- */ +#define CRCCU_IMR_ERRIMR (0x1u << 0) /**< \brief (CRCCU_IMR) CRC Error Interrupt Mask */ +/* -------- CRCCU_ISR : (CRCCU Offset: 0x0000004C) CRCCU Interrupt Status Register -------- */ +#define CRCCU_ISR_ERRISR (0x1u << 0) /**< \brief (CRCCU_ISR) CRC Error Interrupt Status */ + +/*@}*/ + + +#endif /* _SAM4S_CRCCU_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_dacc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_dacc.h new file mode 100644 index 0000000..f3cad49 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_dacc.h
@@ -0,0 +1,218 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_DACC_COMPONENT_ +#define _SAM4S_DACC_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Digital-to-Analog Converter Controller */ +/* ============================================================================= */ +/** \addtogroup SAM4S_DACC Digital-to-Analog Converter Controller */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Dacc hardware registers */ +typedef struct { + WoReg DACC_CR; /**< \brief (Dacc Offset: 0x00) Control Register */ + RwReg DACC_MR; /**< \brief (Dacc Offset: 0x04) Mode Register */ + RoReg Reserved1[2]; + WoReg DACC_CHER; /**< \brief (Dacc Offset: 0x10) Channel Enable Register */ + WoReg DACC_CHDR; /**< \brief (Dacc Offset: 0x14) Channel Disable Register */ + RoReg DACC_CHSR; /**< \brief (Dacc Offset: 0x18) Channel Status Register */ + RoReg Reserved2[1]; + WoReg DACC_CDR; /**< \brief (Dacc Offset: 0x20) Conversion Data Register */ + WoReg DACC_IER; /**< \brief (Dacc Offset: 0x24) Interrupt Enable Register */ + WoReg DACC_IDR; /**< \brief (Dacc Offset: 0x28) Interrupt Disable Register */ + RoReg DACC_IMR; /**< \brief (Dacc Offset: 0x2C) Interrupt Mask Register */ + RoReg DACC_ISR; /**< \brief (Dacc Offset: 0x30) Interrupt Status Register */ + RoReg Reserved3[24]; + RwReg DACC_ACR; /**< \brief (Dacc Offset: 0x94) Analog Current Register */ + RoReg Reserved4[19]; + RwReg DACC_WPMR; /**< \brief (Dacc Offset: 0xE4) Write Protect Mode register */ + RoReg DACC_WPSR; /**< \brief (Dacc Offset: 0xE8) Write Protect Status register */ + RoReg Reserved5[7]; + RwReg DACC_TPR; /**< \brief (Dacc Offset: 0x108) Transmit Pointer Register */ + RwReg DACC_TCR; /**< \brief (Dacc Offset: 0x10C) Transmit Counter Register */ + RoReg Reserved6[2]; + RwReg DACC_TNPR; /**< \brief (Dacc Offset: 0x118) Transmit Next Pointer Register */ + RwReg DACC_TNCR; /**< \brief (Dacc Offset: 0x11C) Transmit Next Counter Register */ + WoReg DACC_PTCR; /**< \brief (Dacc Offset: 0x120) Transfer Control Register */ + RoReg DACC_PTSR; /**< \brief (Dacc Offset: 0x124) Transfer Status Register */ +} Dacc; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- DACC_CR : (DACC Offset: 0x00) Control Register -------- */ +#define DACC_CR_SWRST (0x1u << 0) /**< \brief (DACC_CR) Software Reset */ +/* -------- DACC_MR : (DACC Offset: 0x04) Mode Register -------- */ +#define DACC_MR_TRGEN (0x1u << 0) /**< \brief (DACC_MR) Trigger Enable */ +#define DACC_MR_TRGEN_DIS (0x0u << 0) /**< \brief (DACC_MR) External trigger mode disabled. DACC in free running mode. */ +#define DACC_MR_TRGEN_EN (0x1u << 0) /**< \brief (DACC_MR) External trigger mode enabled. */ +#define DACC_MR_TRGSEL_Pos 1 +#define DACC_MR_TRGSEL_Msk (0x7u << DACC_MR_TRGSEL_Pos) /**< \brief (DACC_MR) Trigger Selection */ +#define DACC_MR_TRGSEL(value) ((DACC_MR_TRGSEL_Msk & ((value) << DACC_MR_TRGSEL_Pos))) +#define DACC_MR_WORD (0x1u << 4) /**< \brief (DACC_MR) Word Transfer */ +#define DACC_MR_WORD_HALF (0x0u << 4) /**< \brief (DACC_MR) Half-Word transfer */ +#define DACC_MR_WORD_WORD (0x1u << 4) /**< \brief (DACC_MR) Word Transfer */ +#define DACC_MR_SLEEP (0x1u << 5) /**< \brief (DACC_MR) Sleep Mode */ +#define DACC_MR_FASTWKUP (0x1u << 6) /**< \brief (DACC_MR) Fast Wake up Mode */ +#define DACC_MR_REFRESH_Pos 8 +#define DACC_MR_REFRESH_Msk (0xffu << DACC_MR_REFRESH_Pos) /**< \brief (DACC_MR) Refresh Period */ +#define DACC_MR_REFRESH(value) ((DACC_MR_REFRESH_Msk & ((value) << DACC_MR_REFRESH_Pos))) +#define DACC_MR_USER_SEL_Pos 16 +#define DACC_MR_USER_SEL_Msk (0x3u << DACC_MR_USER_SEL_Pos) /**< \brief (DACC_MR) User Channel Selection */ +#define DACC_MR_USER_SEL_CHANNEL0 (0x0u << 16) /**< \brief (DACC_MR) Channel 0 */ +#define DACC_MR_USER_SEL_CHANNEL1 (0x1u << 16) /**< \brief (DACC_MR) Channel 1 */ +#define DACC_MR_TAG (0x1u << 20) /**< \brief (DACC_MR) Tag Selection Mode */ +#define DACC_MR_TAG_DIS (0x0u << 20) /**< \brief (DACC_MR) Tag selection mode disabled. Using USER_SEL to select the channel for the conversion. */ +#define DACC_MR_TAG_EN (0x1u << 20) /**< \brief (DACC_MR) Tag selection mode enabled */ +#define DACC_MR_MAXS (0x1u << 21) /**< \brief (DACC_MR) Max Speed Mode */ +#define DACC_MR_STARTUP_Pos 24 +#define DACC_MR_STARTUP_Msk (0x3fu << DACC_MR_STARTUP_Pos) /**< \brief (DACC_MR) Startup Time Selection */ +#define DACC_MR_STARTUP_0 (0x0u << 24) /**< \brief (DACC_MR) 0 periods of DACClock */ +#define DACC_MR_STARTUP_8 (0x1u << 24) /**< \brief (DACC_MR) 8 periods of DACClock */ +#define DACC_MR_STARTUP_16 (0x2u << 24) /**< \brief (DACC_MR) 16 periods of DACClock */ +#define DACC_MR_STARTUP_24 (0x3u << 24) /**< \brief (DACC_MR) 24 periods of DACClock */ +#define DACC_MR_STARTUP_64 (0x4u << 24) /**< \brief (DACC_MR) 64 periods of DACClock */ +#define DACC_MR_STARTUP_80 (0x5u << 24) /**< \brief (DACC_MR) 80 periods of DACClock */ +#define DACC_MR_STARTUP_96 (0x6u << 24) /**< \brief (DACC_MR) 96 periods of DACClock */ +#define DACC_MR_STARTUP_112 (0x7u << 24) /**< \brief (DACC_MR) 112 periods of DACClock */ +#define DACC_MR_STARTUP_512 (0x8u << 24) /**< \brief (DACC_MR) 512 periods of DACClock */ +#define DACC_MR_STARTUP_576 (0x9u << 24) /**< \brief (DACC_MR) 576 periods of DACClock */ +#define DACC_MR_STARTUP_640 (0xAu << 24) /**< \brief (DACC_MR) 640 periods of DACClock */ +#define DACC_MR_STARTUP_704 (0xBu << 24) /**< \brief (DACC_MR) 704 periods of DACClock */ +#define DACC_MR_STARTUP_768 (0xCu << 24) /**< \brief (DACC_MR) 768 periods of DACClock */ +#define DACC_MR_STARTUP_832 (0xDu << 24) /**< \brief (DACC_MR) 832 periods of DACClock */ +#define DACC_MR_STARTUP_896 (0xEu << 24) /**< \brief (DACC_MR) 896 periods of DACClock */ +#define DACC_MR_STARTUP_960 (0xFu << 24) /**< \brief (DACC_MR) 960 periods of DACClock */ +#define DACC_MR_STARTUP_1024 (0x10u << 24) /**< \brief (DACC_MR) 1024 periods of DACClock */ +#define DACC_MR_STARTUP_1088 (0x11u << 24) /**< \brief (DACC_MR) 1088 periods of DACClock */ +#define DACC_MR_STARTUP_1152 (0x12u << 24) /**< \brief (DACC_MR) 1152 periods of DACClock */ +#define DACC_MR_STARTUP_1216 (0x13u << 24) /**< \brief (DACC_MR) 1216 periods of DACClock */ +#define DACC_MR_STARTUP_1280 (0x14u << 24) /**< \brief (DACC_MR) 1280 periods of DACClock */ +#define DACC_MR_STARTUP_1344 (0x15u << 24) /**< \brief (DACC_MR) 1344 periods of DACClock */ +#define DACC_MR_STARTUP_1408 (0x16u << 24) /**< \brief (DACC_MR) 1408 periods of DACClock */ +#define DACC_MR_STARTUP_1472 (0x17u << 24) /**< \brief (DACC_MR) 1472 periods of DACClock */ +#define DACC_MR_STARTUP_1536 (0x18u << 24) /**< \brief (DACC_MR) 1536 periods of DACClock */ +#define DACC_MR_STARTUP_1600 (0x19u << 24) /**< \brief (DACC_MR) 1600 periods of DACClock */ +#define DACC_MR_STARTUP_1664 (0x1Au << 24) /**< \brief (DACC_MR) 1664 periods of DACClock */ +#define DACC_MR_STARTUP_1728 (0x1Bu << 24) /**< \brief (DACC_MR) 1728 periods of DACClock */ +#define DACC_MR_STARTUP_1792 (0x1Cu << 24) /**< \brief (DACC_MR) 1792 periods of DACClock */ +#define DACC_MR_STARTUP_1856 (0x1Du << 24) /**< \brief (DACC_MR) 1856 periods of DACClock */ +#define DACC_MR_STARTUP_1920 (0x1Eu << 24) /**< \brief (DACC_MR) 1920 periods of DACClock */ +#define DACC_MR_STARTUP_1984 (0x1Fu << 24) /**< \brief (DACC_MR) 1984 periods of DACClock */ +/* -------- DACC_CHER : (DACC Offset: 0x10) Channel Enable Register -------- */ +#define DACC_CHER_CH0 (0x1u << 0) /**< \brief (DACC_CHER) Channel 0 Enable */ +#define DACC_CHER_CH1 (0x1u << 1) /**< \brief (DACC_CHER) Channel 1 Enable */ +/* -------- DACC_CHDR : (DACC Offset: 0x14) Channel Disable Register -------- */ +#define DACC_CHDR_CH0 (0x1u << 0) /**< \brief (DACC_CHDR) Channel 0 Disable */ +#define DACC_CHDR_CH1 (0x1u << 1) /**< \brief (DACC_CHDR) Channel 1 Disable */ +/* -------- DACC_CHSR : (DACC Offset: 0x18) Channel Status Register -------- */ +#define DACC_CHSR_CH0 (0x1u << 0) /**< \brief (DACC_CHSR) Channel 0 Status */ +#define DACC_CHSR_CH1 (0x1u << 1) /**< \brief (DACC_CHSR) Channel 1 Status */ +/* -------- DACC_CDR : (DACC Offset: 0x20) Conversion Data Register -------- */ +#define DACC_CDR_DATA_Pos 0 +#define DACC_CDR_DATA_Msk (0xffffffffu << DACC_CDR_DATA_Pos) /**< \brief (DACC_CDR) Data to Convert */ +#define DACC_CDR_DATA(value) ((DACC_CDR_DATA_Msk & ((value) << DACC_CDR_DATA_Pos))) +/* -------- DACC_IER : (DACC Offset: 0x24) Interrupt Enable Register -------- */ +#define DACC_IER_TXRDY (0x1u << 0) /**< \brief (DACC_IER) Transmit Ready Interrupt Enable */ +#define DACC_IER_EOC (0x1u << 1) /**< \brief (DACC_IER) End of Conversion Interrupt Enable */ +#define DACC_IER_ENDTX (0x1u << 2) /**< \brief (DACC_IER) End of Transmit Buffer Interrupt Enable */ +#define DACC_IER_TXBUFE (0x1u << 3) /**< \brief (DACC_IER) Transmit Buffer Empty Interrupt Enable */ +/* -------- DACC_IDR : (DACC Offset: 0x28) Interrupt Disable Register -------- */ +#define DACC_IDR_TXRDY (0x1u << 0) /**< \brief (DACC_IDR) Transmit Ready Interrupt Disable. */ +#define DACC_IDR_EOC (0x1u << 1) /**< \brief (DACC_IDR) End of Conversion Interrupt Disable */ +#define DACC_IDR_ENDTX (0x1u << 2) /**< \brief (DACC_IDR) End of Transmit Buffer Interrupt Disable */ +#define DACC_IDR_TXBUFE (0x1u << 3) /**< \brief (DACC_IDR) Transmit Buffer Empty Interrupt Disable */ +/* -------- DACC_IMR : (DACC Offset: 0x2C) Interrupt Mask Register -------- */ +#define DACC_IMR_TXRDY (0x1u << 0) /**< \brief (DACC_IMR) Transmit Ready Interrupt Mask */ +#define DACC_IMR_EOC (0x1u << 1) /**< \brief (DACC_IMR) End of Conversion Interrupt Mask */ +#define DACC_IMR_ENDTX (0x1u << 2) /**< \brief (DACC_IMR) End of Transmit Buffer Interrupt Mask */ +#define DACC_IMR_TXBUFE (0x1u << 3) /**< \brief (DACC_IMR) Transmit Buffer Empty Interrupt Mask */ +/* -------- DACC_ISR : (DACC Offset: 0x30) Interrupt Status Register -------- */ +#define DACC_ISR_TXRDY (0x1u << 0) /**< \brief (DACC_ISR) Transmit Ready Interrupt Flag */ +#define DACC_ISR_EOC (0x1u << 1) /**< \brief (DACC_ISR) End of Conversion Interrupt Flag */ +#define DACC_ISR_ENDTX (0x1u << 2) /**< \brief (DACC_ISR) End of DMA Interrupt Flag */ +#define DACC_ISR_TXBUFE (0x1u << 3) /**< \brief (DACC_ISR) Transmit Buffer Empty */ +/* -------- DACC_ACR : (DACC Offset: 0x94) Analog Current Register -------- */ +#define DACC_ACR_IBCTLCH0_Pos 0 +#define DACC_ACR_IBCTLCH0_Msk (0x3u << DACC_ACR_IBCTLCH0_Pos) /**< \brief (DACC_ACR) Analog Output Current Control */ +#define DACC_ACR_IBCTLCH0(value) ((DACC_ACR_IBCTLCH0_Msk & ((value) << DACC_ACR_IBCTLCH0_Pos))) +#define DACC_ACR_IBCTLCH1_Pos 2 +#define DACC_ACR_IBCTLCH1_Msk (0x3u << DACC_ACR_IBCTLCH1_Pos) /**< \brief (DACC_ACR) Analog Output Current Control */ +#define DACC_ACR_IBCTLCH1(value) ((DACC_ACR_IBCTLCH1_Msk & ((value) << DACC_ACR_IBCTLCH1_Pos))) +#define DACC_ACR_IBCTLDACCORE_Pos 8 +#define DACC_ACR_IBCTLDACCORE_Msk (0x3u << DACC_ACR_IBCTLDACCORE_Pos) /**< \brief (DACC_ACR) Bias Current Control for DAC Core */ +#define DACC_ACR_IBCTLDACCORE(value) ((DACC_ACR_IBCTLDACCORE_Msk & ((value) << DACC_ACR_IBCTLDACCORE_Pos))) +/* -------- DACC_WPMR : (DACC Offset: 0xE4) Write Protect Mode register -------- */ +#define DACC_WPMR_WPEN (0x1u << 0) /**< \brief (DACC_WPMR) Write Protect Enable */ +#define DACC_WPMR_WPKEY_Pos 8 +#define DACC_WPMR_WPKEY_Msk (0xffffffu << DACC_WPMR_WPKEY_Pos) /**< \brief (DACC_WPMR) Write Protect KEY */ +#define DACC_WPMR_WPKEY(value) ((DACC_WPMR_WPKEY_Msk & ((value) << DACC_WPMR_WPKEY_Pos))) +/* -------- DACC_WPSR : (DACC Offset: 0xE8) Write Protect Status register -------- */ +#define DACC_WPSR_WPROTERR (0x1u << 0) /**< \brief (DACC_WPSR) Write protection error */ +#define DACC_WPSR_WPROTADDR_Pos 8 +#define DACC_WPSR_WPROTADDR_Msk (0xffu << DACC_WPSR_WPROTADDR_Pos) /**< \brief (DACC_WPSR) Write protection error address */ +/* -------- DACC_TPR : (DACC Offset: 0x108) Transmit Pointer Register -------- */ +#define DACC_TPR_TXPTR_Pos 0 +#define DACC_TPR_TXPTR_Msk (0xffffffffu << DACC_TPR_TXPTR_Pos) /**< \brief (DACC_TPR) Transmit Counter Register */ +#define DACC_TPR_TXPTR(value) ((DACC_TPR_TXPTR_Msk & ((value) << DACC_TPR_TXPTR_Pos))) +/* -------- DACC_TCR : (DACC Offset: 0x10C) Transmit Counter Register -------- */ +#define DACC_TCR_TXCTR_Pos 0 +#define DACC_TCR_TXCTR_Msk (0xffffu << DACC_TCR_TXCTR_Pos) /**< \brief (DACC_TCR) Transmit Counter Register */ +#define DACC_TCR_TXCTR(value) ((DACC_TCR_TXCTR_Msk & ((value) << DACC_TCR_TXCTR_Pos))) +/* -------- DACC_TNPR : (DACC Offset: 0x118) Transmit Next Pointer Register -------- */ +#define DACC_TNPR_TXNPTR_Pos 0 +#define DACC_TNPR_TXNPTR_Msk (0xffffffffu << DACC_TNPR_TXNPTR_Pos) /**< \brief (DACC_TNPR) Transmit Next Pointer */ +#define DACC_TNPR_TXNPTR(value) ((DACC_TNPR_TXNPTR_Msk & ((value) << DACC_TNPR_TXNPTR_Pos))) +/* -------- DACC_TNCR : (DACC Offset: 0x11C) Transmit Next Counter Register -------- */ +#define DACC_TNCR_TXNCTR_Pos 0 +#define DACC_TNCR_TXNCTR_Msk (0xffffu << DACC_TNCR_TXNCTR_Pos) /**< \brief (DACC_TNCR) Transmit Counter Next */ +#define DACC_TNCR_TXNCTR(value) ((DACC_TNCR_TXNCTR_Msk & ((value) << DACC_TNCR_TXNCTR_Pos))) +/* -------- DACC_PTCR : (DACC Offset: 0x120) Transfer Control Register -------- */ +#define DACC_PTCR_RXTEN (0x1u << 0) /**< \brief (DACC_PTCR) Receiver Transfer Enable */ +#define DACC_PTCR_RXTDIS (0x1u << 1) /**< \brief (DACC_PTCR) Receiver Transfer Disable */ +#define DACC_PTCR_TXTEN (0x1u << 8) /**< \brief (DACC_PTCR) Transmitter Transfer Enable */ +#define DACC_PTCR_TXTDIS (0x1u << 9) /**< \brief (DACC_PTCR) Transmitter Transfer Disable */ +/* -------- DACC_PTSR : (DACC Offset: 0x124) Transfer Status Register -------- */ +#define DACC_PTSR_RXTEN (0x1u << 0) /**< \brief (DACC_PTSR) Receiver Transfer Enable */ +#define DACC_PTSR_TXTEN (0x1u << 8) /**< \brief (DACC_PTSR) Transmitter Transfer Enable */ + +/*@}*/ + + +#endif /* _SAM4S_DACC_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_efc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_efc.h new file mode 100644 index 0000000..fa8964a --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_efc.h
@@ -0,0 +1,88 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_EFC_COMPONENT_ +#define _SAM4S_EFC_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Embedded Flash Controller */ +/* ============================================================================= */ +/** \addtogroup SAM4S_EFC Embedded Flash Controller */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Efc hardware registers */ +typedef struct { + RwReg EEFC_FMR; /**< \brief (Efc Offset: 0x00) EEFC Flash Mode Register */ + WoReg EEFC_FCR; /**< \brief (Efc Offset: 0x04) EEFC Flash Command Register */ + RoReg EEFC_FSR; /**< \brief (Efc Offset: 0x08) EEFC Flash Status Register */ + RoReg EEFC_FRR; /**< \brief (Efc Offset: 0x0C) EEFC Flash Result Register */ +} Efc; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- EEFC_FMR : (EFC Offset: 0x00) EEFC Flash Mode Register -------- */ +#define EEFC_FMR_FRDY (0x1u << 0) /**< \brief (EEFC_FMR) Ready Interrupt Enable */ +#define EEFC_FMR_FWS_Pos 8 +#define EEFC_FMR_FWS_Msk (0xfu << EEFC_FMR_FWS_Pos) /**< \brief (EEFC_FMR) Flash Wait State */ +#define EEFC_FMR_FWS(value) ((EEFC_FMR_FWS_Msk & ((value) << EEFC_FMR_FWS_Pos))) +#define EEFC_FMR_SCOD (0x1u << 16) /**< \brief (EEFC_FMR) Sequential Code Optimization Disable */ +#define EEFC_FMR_FAM (0x1u << 24) /**< \brief (EEFC_FMR) Flash Access Mode */ +#define EEFC_FMR_CLOE (0x1u << 26) /**< \brief (EEFC_FMR) Code Loops Optimization Enable */ +/* -------- EEFC_FCR : (EFC Offset: 0x04) EEFC Flash Command Register -------- */ +#define EEFC_FCR_FCMD_Pos 0 +#define EEFC_FCR_FCMD_Msk (0xffu << EEFC_FCR_FCMD_Pos) /**< \brief (EEFC_FCR) Flash Command */ +#define EEFC_FCR_FCMD(value) ((EEFC_FCR_FCMD_Msk & ((value) << EEFC_FCR_FCMD_Pos))) +#define EEFC_FCR_FARG_Pos 8 +#define EEFC_FCR_FARG_Msk (0xffffu << EEFC_FCR_FARG_Pos) /**< \brief (EEFC_FCR) Flash Command Argument */ +#define EEFC_FCR_FARG(value) ((EEFC_FCR_FARG_Msk & ((value) << EEFC_FCR_FARG_Pos))) +#define EEFC_FCR_FKEY_Pos 24 +#define EEFC_FCR_FKEY_Msk (0xffu << EEFC_FCR_FKEY_Pos) /**< \brief (EEFC_FCR) Flash Writing Protection Key */ +#define EEFC_FCR_FKEY(value) ((EEFC_FCR_FKEY_Msk & ((value) << EEFC_FCR_FKEY_Pos))) +/* -------- EEFC_FSR : (EFC Offset: 0x08) EEFC Flash Status Register -------- */ +#define EEFC_FSR_FRDY (0x1u << 0) /**< \brief (EEFC_FSR) Flash Ready Status */ +#define EEFC_FSR_FCMDE (0x1u << 1) /**< \brief (EEFC_FSR) Flash Command Error Status */ +#define EEFC_FSR_FLOCKE (0x1u << 2) /**< \brief (EEFC_FSR) Flash Lock Error Status */ +#define EEFC_FSR_FLERR (0x1u << 3) /**< \brief (EEFC_FSR) Flash Error Status */ +/* -------- EEFC_FRR : (EFC Offset: 0x0C) EEFC Flash Result Register -------- */ +#define EEFC_FRR_FVALUE_Pos 0 +#define EEFC_FRR_FVALUE_Msk (0xffffffffu << EEFC_FRR_FVALUE_Pos) /**< \brief (EEFC_FRR) Flash Result Value */ + +/*@}*/ + + +#endif /* _SAM4S_EFC_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_gpbr.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_gpbr.h new file mode 100644 index 0000000..e1a420a --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_gpbr.h
@@ -0,0 +1,63 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_GPBR_COMPONENT_ +#define _SAM4S_GPBR_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR General Purpose Backup Register */ +/* ============================================================================= */ +/** \addtogroup SAM4S_GPBR General Purpose Backup Register */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Gpbr hardware registers */ +typedef struct { + RwReg SYS_GPBR[8]; /**< \brief (Gpbr Offset: 0x0) General Purpose Backup Register */ +} Gpbr; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- SYS_GPBR[8] : (GPBR Offset: 0x0) General Purpose Backup Register -------- */ +#define SYS_GPBR_GPBR_VALUE_Pos 0 +#define SYS_GPBR_GPBR_VALUE_Msk (0xffffffffu << SYS_GPBR_GPBR_VALUE_Pos) /**< \brief (SYS_GPBR[8]) Value of GPBR x */ +#define SYS_GPBR_GPBR_VALUE(value) ((SYS_GPBR_GPBR_VALUE_Msk & ((value) << SYS_GPBR_GPBR_VALUE_Pos))) + +/*@}*/ + + +#endif /* _SAM4S_GPBR_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_hsmci.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_hsmci.h new file mode 100644 index 0000000..6b2e9eb --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_hsmci.h
@@ -0,0 +1,401 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_HSMCI_COMPONENT_ +#define _SAM4S_HSMCI_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR High Speed MultiMedia Card Interface */ +/* ============================================================================= */ +/** \addtogroup SAM4S_HSMCI High Speed MultiMedia Card Interface */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Hsmci hardware registers */ +typedef struct { + WoReg HSMCI_CR; /**< \brief (Hsmci Offset: 0x00) Control Register */ + RwReg HSMCI_MR; /**< \brief (Hsmci Offset: 0x04) Mode Register */ + RwReg HSMCI_DTOR; /**< \brief (Hsmci Offset: 0x08) Data Timeout Register */ + RwReg HSMCI_SDCR; /**< \brief (Hsmci Offset: 0x0C) SD/SDIO Card Register */ + RwReg HSMCI_ARGR; /**< \brief (Hsmci Offset: 0x10) Argument Register */ + WoReg HSMCI_CMDR; /**< \brief (Hsmci Offset: 0x14) Command Register */ + RwReg HSMCI_BLKR; /**< \brief (Hsmci Offset: 0x18) Block Register */ + RwReg HSMCI_CSTOR; /**< \brief (Hsmci Offset: 0x1C) Completion Signal Timeout Register */ + RoReg HSMCI_RSPR[4]; /**< \brief (Hsmci Offset: 0x20) Response Register */ + RoReg HSMCI_RDR; /**< \brief (Hsmci Offset: 0x30) Receive Data Register */ + WoReg HSMCI_TDR; /**< \brief (Hsmci Offset: 0x34) Transmit Data Register */ + RoReg Reserved1[2]; + RoReg HSMCI_SR; /**< \brief (Hsmci Offset: 0x40) Status Register */ + WoReg HSMCI_IER; /**< \brief (Hsmci Offset: 0x44) Interrupt Enable Register */ + WoReg HSMCI_IDR; /**< \brief (Hsmci Offset: 0x48) Interrupt Disable Register */ + RoReg HSMCI_IMR; /**< \brief (Hsmci Offset: 0x4C) Interrupt Mask Register */ + RoReg Reserved2[1]; + RwReg HSMCI_CFG; /**< \brief (Hsmci Offset: 0x54) Configuration Register */ + RoReg Reserved3[35]; + RwReg HSMCI_WPMR; /**< \brief (Hsmci Offset: 0xE4) Write Protection Mode Register */ + RoReg HSMCI_WPSR; /**< \brief (Hsmci Offset: 0xE8) Write Protection Status Register */ + RoReg Reserved4[5]; + RwReg HSMCI_RPR; /**< \brief (Hsmci Offset: 0x100) Receive Pointer Register */ + RwReg HSMCI_RCR; /**< \brief (Hsmci Offset: 0x104) Receive Counter Register */ + RwReg HSMCI_TPR; /**< \brief (Hsmci Offset: 0x108) Transmit Pointer Register */ + RwReg HSMCI_TCR; /**< \brief (Hsmci Offset: 0x10C) Transmit Counter Register */ + RwReg HSMCI_RNPR; /**< \brief (Hsmci Offset: 0x110) Receive Next Pointer Register */ + RwReg HSMCI_RNCR; /**< \brief (Hsmci Offset: 0x114) Receive Next Counter Register */ + RwReg HSMCI_TNPR; /**< \brief (Hsmci Offset: 0x118) Transmit Next Pointer Register */ + RwReg HSMCI_TNCR; /**< \brief (Hsmci Offset: 0x11C) Transmit Next Counter Register */ + WoReg HSMCI_PTCR; /**< \brief (Hsmci Offset: 0x120) Transfer Control Register */ + RoReg HSMCI_PTSR; /**< \brief (Hsmci Offset: 0x124) Transfer Status Register */ + RoReg Reserved5[54]; + RwReg HSMCI_FIFO[256]; /**< \brief (Hsmci Offset: 0x200) FIFO Memory Aperture0 */ +} Hsmci; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- HSMCI_CR : (HSMCI Offset: 0x00) Control Register -------- */ +#define HSMCI_CR_MCIEN (0x1u << 0) /**< \brief (HSMCI_CR) Multi-Media Interface Enable */ +#define HSMCI_CR_MCIDIS (0x1u << 1) /**< \brief (HSMCI_CR) Multi-Media Interface Disable */ +#define HSMCI_CR_PWSEN (0x1u << 2) /**< \brief (HSMCI_CR) Power Save Mode Enable */ +#define HSMCI_CR_PWSDIS (0x1u << 3) /**< \brief (HSMCI_CR) Power Save Mode Disable */ +#define HSMCI_CR_SWRST (0x1u << 7) /**< \brief (HSMCI_CR) Software Reset */ +/* -------- HSMCI_MR : (HSMCI Offset: 0x04) Mode Register -------- */ +#define HSMCI_MR_CLKDIV_Pos 0 +#define HSMCI_MR_CLKDIV_Msk (0xffu << HSMCI_MR_CLKDIV_Pos) /**< \brief (HSMCI_MR) Clock Divider */ +#define HSMCI_MR_CLKDIV(value) ((HSMCI_MR_CLKDIV_Msk & ((value) << HSMCI_MR_CLKDIV_Pos))) +#define HSMCI_MR_PWSDIV_Pos 8 +#define HSMCI_MR_PWSDIV_Msk (0x7u << HSMCI_MR_PWSDIV_Pos) /**< \brief (HSMCI_MR) Power Saving Divider */ +#define HSMCI_MR_PWSDIV(value) ((HSMCI_MR_PWSDIV_Msk & ((value) << HSMCI_MR_PWSDIV_Pos))) +#define HSMCI_MR_RDPROOF (0x1u << 11) /**< \brief (HSMCI_MR) */ +#define HSMCI_MR_WRPROOF (0x1u << 12) /**< \brief (HSMCI_MR) */ +#define HSMCI_MR_FBYTE (0x1u << 13) /**< \brief (HSMCI_MR) Force Byte Transfer */ +#define HSMCI_MR_PADV (0x1u << 14) /**< \brief (HSMCI_MR) Padding Value */ +#define HSMCI_MR_PDCMODE (0x1u << 15) /**< \brief (HSMCI_MR) PDC-oriented Mode */ +#define HSMCI_MR_BLKLEN_Pos 16 +#define HSMCI_MR_BLKLEN_Msk (0xffffu << HSMCI_MR_BLKLEN_Pos) /**< \brief (HSMCI_MR) Data Block Length */ +#define HSMCI_MR_BLKLEN(value) ((HSMCI_MR_BLKLEN_Msk & ((value) << HSMCI_MR_BLKLEN_Pos))) +/* -------- HSMCI_DTOR : (HSMCI Offset: 0x08) Data Timeout Register -------- */ +#define HSMCI_DTOR_DTOCYC_Pos 0 +#define HSMCI_DTOR_DTOCYC_Msk (0xfu << HSMCI_DTOR_DTOCYC_Pos) /**< \brief (HSMCI_DTOR) Data Timeout Cycle Number */ +#define HSMCI_DTOR_DTOCYC(value) ((HSMCI_DTOR_DTOCYC_Msk & ((value) << HSMCI_DTOR_DTOCYC_Pos))) +#define HSMCI_DTOR_DTOMUL_Pos 4 +#define HSMCI_DTOR_DTOMUL_Msk (0x7u << HSMCI_DTOR_DTOMUL_Pos) /**< \brief (HSMCI_DTOR) Data Timeout Multiplier */ +#define HSMCI_DTOR_DTOMUL_1 (0x0u << 4) /**< \brief (HSMCI_DTOR) DTOCYC */ +#define HSMCI_DTOR_DTOMUL_16 (0x1u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 16 */ +#define HSMCI_DTOR_DTOMUL_128 (0x2u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 128 */ +#define HSMCI_DTOR_DTOMUL_256 (0x3u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 256 */ +#define HSMCI_DTOR_DTOMUL_1024 (0x4u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 1024 */ +#define HSMCI_DTOR_DTOMUL_4096 (0x5u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 4096 */ +#define HSMCI_DTOR_DTOMUL_65536 (0x6u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 65536 */ +#define HSMCI_DTOR_DTOMUL_1048576 (0x7u << 4) /**< \brief (HSMCI_DTOR) DTOCYC x 1048576 */ +/* -------- HSMCI_SDCR : (HSMCI Offset: 0x0C) SD/SDIO Card Register -------- */ +#define HSMCI_SDCR_SDCSEL_Pos 0 +#define HSMCI_SDCR_SDCSEL_Msk (0x3u << HSMCI_SDCR_SDCSEL_Pos) /**< \brief (HSMCI_SDCR) SDCard/SDIO Slot */ +#define HSMCI_SDCR_SDCSEL_SLOTA (0x0u << 0) /**< \brief (HSMCI_SDCR) Slot A is selected. */ +#define HSMCI_SDCR_SDCSEL_SLOTB (0x1u << 0) /**< \brief (HSMCI_SDCR) - */ +#define HSMCI_SDCR_SDCSEL_SLOTC (0x2u << 0) /**< \brief (HSMCI_SDCR) - */ +#define HSMCI_SDCR_SDCSEL_SLOTD (0x3u << 0) /**< \brief (HSMCI_SDCR) - */ +#define HSMCI_SDCR_SDCBUS_Pos 6 +#define HSMCI_SDCR_SDCBUS_Msk (0x3u << HSMCI_SDCR_SDCBUS_Pos) /**< \brief (HSMCI_SDCR) SDCard/SDIO Bus Width */ +#define HSMCI_SDCR_SDCBUS_1 (0x0u << 6) /**< \brief (HSMCI_SDCR) 1 bit */ +#define HSMCI_SDCR_SDCBUS_4 (0x2u << 6) /**< \brief (HSMCI_SDCR) 4 bit */ +#define HSMCI_SDCR_SDCBUS_8 (0x3u << 6) /**< \brief (HSMCI_SDCR) 8 bit */ +/* -------- HSMCI_ARGR : (HSMCI Offset: 0x10) Argument Register -------- */ +#define HSMCI_ARGR_ARG_Pos 0 +#define HSMCI_ARGR_ARG_Msk (0xffffffffu << HSMCI_ARGR_ARG_Pos) /**< \brief (HSMCI_ARGR) Command Argument */ +#define HSMCI_ARGR_ARG(value) ((HSMCI_ARGR_ARG_Msk & ((value) << HSMCI_ARGR_ARG_Pos))) +/* -------- HSMCI_CMDR : (HSMCI Offset: 0x14) Command Register -------- */ +#define HSMCI_CMDR_CMDNB_Pos 0 +#define HSMCI_CMDR_CMDNB_Msk (0x3fu << HSMCI_CMDR_CMDNB_Pos) /**< \brief (HSMCI_CMDR) Command Number */ +#define HSMCI_CMDR_CMDNB(value) ((HSMCI_CMDR_CMDNB_Msk & ((value) << HSMCI_CMDR_CMDNB_Pos))) +#define HSMCI_CMDR_RSPTYP_Pos 6 +#define HSMCI_CMDR_RSPTYP_Msk (0x3u << HSMCI_CMDR_RSPTYP_Pos) /**< \brief (HSMCI_CMDR) Response Type */ +#define HSMCI_CMDR_RSPTYP_NORESP (0x0u << 6) /**< \brief (HSMCI_CMDR) No response. */ +#define HSMCI_CMDR_RSPTYP_48_BIT (0x1u << 6) /**< \brief (HSMCI_CMDR) 48-bit response. */ +#define HSMCI_CMDR_RSPTYP_136_BIT (0x2u << 6) /**< \brief (HSMCI_CMDR) 136-bit response. */ +#define HSMCI_CMDR_RSPTYP_R1B (0x3u << 6) /**< \brief (HSMCI_CMDR) R1b response type */ +#define HSMCI_CMDR_SPCMD_Pos 8 +#define HSMCI_CMDR_SPCMD_Msk (0x7u << HSMCI_CMDR_SPCMD_Pos) /**< \brief (HSMCI_CMDR) Special Command */ +#define HSMCI_CMDR_SPCMD_STD (0x0u << 8) /**< \brief (HSMCI_CMDR) Not a special CMD. */ +#define HSMCI_CMDR_SPCMD_INIT (0x1u << 8) /**< \brief (HSMCI_CMDR) Initialization CMD: 74 clock cycles for initialization sequence. */ +#define HSMCI_CMDR_SPCMD_SYNC (0x2u << 8) /**< \brief (HSMCI_CMDR) Synchronized CMD: Wait for the end of the current data block transfer before sending the pending command. */ +#define HSMCI_CMDR_SPCMD_CE_ATA (0x3u << 8) /**< \brief (HSMCI_CMDR) CE-ATA Completion Signal disable Command. The host cancels the ability for the device to return a command completion signal on the command line. */ +#define HSMCI_CMDR_SPCMD_IT_CMD (0x4u << 8) /**< \brief (HSMCI_CMDR) Interrupt command: Corresponds to the Interrupt Mode (CMD40). */ +#define HSMCI_CMDR_SPCMD_IT_RESP (0x5u << 8) /**< \brief (HSMCI_CMDR) Interrupt response: Corresponds to the Interrupt Mode (CMD40). */ +#define HSMCI_CMDR_SPCMD_BOR (0x6u << 8) /**< \brief (HSMCI_CMDR) Boot Operation Request. Start a boot operation mode, the host processor can read boot data from the MMC device directly. */ +#define HSMCI_CMDR_SPCMD_EBO (0x7u << 8) /**< \brief (HSMCI_CMDR) End Boot Operation. This command allows the host processor to terminate the boot operation mode. */ +#define HSMCI_CMDR_OPDCMD (0x1u << 11) /**< \brief (HSMCI_CMDR) Open Drain Command */ +#define HSMCI_CMDR_OPDCMD_PUSHPULL (0x0u << 11) /**< \brief (HSMCI_CMDR) Push pull command. */ +#define HSMCI_CMDR_OPDCMD_OPENDRAIN (0x1u << 11) /**< \brief (HSMCI_CMDR) Open drain command. */ +#define HSMCI_CMDR_MAXLAT (0x1u << 12) /**< \brief (HSMCI_CMDR) Max Latency for Command to Response */ +#define HSMCI_CMDR_MAXLAT_5 (0x0u << 12) /**< \brief (HSMCI_CMDR) 5-cycle max latency. */ +#define HSMCI_CMDR_MAXLAT_64 (0x1u << 12) /**< \brief (HSMCI_CMDR) 64-cycle max latency. */ +#define HSMCI_CMDR_TRCMD_Pos 16 +#define HSMCI_CMDR_TRCMD_Msk (0x3u << HSMCI_CMDR_TRCMD_Pos) /**< \brief (HSMCI_CMDR) Transfer Command */ +#define HSMCI_CMDR_TRCMD_NO_DATA (0x0u << 16) /**< \brief (HSMCI_CMDR) No data transfer */ +#define HSMCI_CMDR_TRCMD_START_DATA (0x1u << 16) /**< \brief (HSMCI_CMDR) Start data transfer */ +#define HSMCI_CMDR_TRCMD_STOP_DATA (0x2u << 16) /**< \brief (HSMCI_CMDR) Stop data transfer */ +#define HSMCI_CMDR_TRDIR (0x1u << 18) /**< \brief (HSMCI_CMDR) Transfer Direction */ +#define HSMCI_CMDR_TRDIR_WRITE (0x0u << 18) /**< \brief (HSMCI_CMDR) Write. */ +#define HSMCI_CMDR_TRDIR_READ (0x1u << 18) /**< \brief (HSMCI_CMDR) Read. */ +#define HSMCI_CMDR_TRTYP_Pos 19 +#define HSMCI_CMDR_TRTYP_Msk (0x7u << HSMCI_CMDR_TRTYP_Pos) /**< \brief (HSMCI_CMDR) Transfer Type */ +#define HSMCI_CMDR_TRTYP_SINGLE (0x0u << 19) /**< \brief (HSMCI_CMDR) MMC/SDCard Single Block */ +#define HSMCI_CMDR_TRTYP_MULTIPLE (0x1u << 19) /**< \brief (HSMCI_CMDR) MMC/SDCard Multiple Block */ +#define HSMCI_CMDR_TRTYP_STREAM (0x2u << 19) /**< \brief (HSMCI_CMDR) MMC Stream */ +#define HSMCI_CMDR_TRTYP_BYTE (0x4u << 19) /**< \brief (HSMCI_CMDR) SDIO Byte */ +#define HSMCI_CMDR_TRTYP_BLOCK (0x5u << 19) /**< \brief (HSMCI_CMDR) SDIO Block */ +#define HSMCI_CMDR_IOSPCMD_Pos 24 +#define HSMCI_CMDR_IOSPCMD_Msk (0x3u << HSMCI_CMDR_IOSPCMD_Pos) /**< \brief (HSMCI_CMDR) SDIO Special Command */ +#define HSMCI_CMDR_IOSPCMD_STD (0x0u << 24) /**< \brief (HSMCI_CMDR) Not an SDIO Special Command */ +#define HSMCI_CMDR_IOSPCMD_SUSPEND (0x1u << 24) /**< \brief (HSMCI_CMDR) SDIO Suspend Command */ +#define HSMCI_CMDR_IOSPCMD_RESUME (0x2u << 24) /**< \brief (HSMCI_CMDR) SDIO Resume Command */ +#define HSMCI_CMDR_ATACS (0x1u << 26) /**< \brief (HSMCI_CMDR) ATA with Command Completion Signal */ +#define HSMCI_CMDR_ATACS_NORMAL (0x0u << 26) /**< \brief (HSMCI_CMDR) Normal operation mode. */ +#define HSMCI_CMDR_ATACS_COMPLETION (0x1u << 26) /**< \brief (HSMCI_CMDR) This bit indicates that a completion signal is expected within a programmed amount of time (HSMCI_CSTOR). */ +#define HSMCI_CMDR_BOOT_ACK (0x1u << 27) /**< \brief (HSMCI_CMDR) Boot Operation Acknowledge. */ +/* -------- HSMCI_BLKR : (HSMCI Offset: 0x18) Block Register -------- */ +#define HSMCI_BLKR_BCNT_Pos 0 +#define HSMCI_BLKR_BCNT_Msk (0xffffu << HSMCI_BLKR_BCNT_Pos) /**< \brief (HSMCI_BLKR) MMC/SDIO Block Count - SDIO Byte Count */ +#define HSMCI_BLKR_BCNT_MULTIPLE (0x0u << 0) /**< \brief (HSMCI_BLKR) MMC/SDCARD Multiple BlockFrom 1 to 65635: Value 0 corresponds to an infinite block transfer. */ +#define HSMCI_BLKR_BCNT_BYTE (0x4u << 0) /**< \brief (HSMCI_BLKR) SDIO ByteFrom 1 to 512 bytes: Value 0 corresponds to a 512-byte transfer.Values from 0x200 to 0xFFFF are forbidden. */ +#define HSMCI_BLKR_BCNT_BLOCK (0x5u << 0) /**< \brief (HSMCI_BLKR) SDIO BlockFrom 1 to 511 blocks: Value 0 corresponds to an infinite block transfer.Values from 0x200 to 0xFFFF are forbidden. */ +#define HSMCI_BLKR_BLKLEN_Pos 16 +#define HSMCI_BLKR_BLKLEN_Msk (0xffffu << HSMCI_BLKR_BLKLEN_Pos) /**< \brief (HSMCI_BLKR) Data Block Length */ +#define HSMCI_BLKR_BLKLEN(value) ((HSMCI_BLKR_BLKLEN_Msk & ((value) << HSMCI_BLKR_BLKLEN_Pos))) +/* -------- HSMCI_CSTOR : (HSMCI Offset: 0x1C) Completion Signal Timeout Register -------- */ +#define HSMCI_CSTOR_CSTOCYC_Pos 0 +#define HSMCI_CSTOR_CSTOCYC_Msk (0xfu << HSMCI_CSTOR_CSTOCYC_Pos) /**< \brief (HSMCI_CSTOR) Completion Signal Timeout Cycle Number */ +#define HSMCI_CSTOR_CSTOCYC(value) ((HSMCI_CSTOR_CSTOCYC_Msk & ((value) << HSMCI_CSTOR_CSTOCYC_Pos))) +#define HSMCI_CSTOR_CSTOMUL_Pos 4 +#define HSMCI_CSTOR_CSTOMUL_Msk (0x7u << HSMCI_CSTOR_CSTOMUL_Pos) /**< \brief (HSMCI_CSTOR) Completion Signal Timeout Multiplier */ +#define HSMCI_CSTOR_CSTOMUL_1 (0x0u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 1 */ +#define HSMCI_CSTOR_CSTOMUL_16 (0x1u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 16 */ +#define HSMCI_CSTOR_CSTOMUL_128 (0x2u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 128 */ +#define HSMCI_CSTOR_CSTOMUL_256 (0x3u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 256 */ +#define HSMCI_CSTOR_CSTOMUL_1024 (0x4u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 1024 */ +#define HSMCI_CSTOR_CSTOMUL_4096 (0x5u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 4096 */ +#define HSMCI_CSTOR_CSTOMUL_65536 (0x6u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 65536 */ +#define HSMCI_CSTOR_CSTOMUL_1048576 (0x7u << 4) /**< \brief (HSMCI_CSTOR) CSTOCYC x 1048576 */ +/* -------- HSMCI_RSPR[4] : (HSMCI Offset: 0x20) Response Register -------- */ +#define HSMCI_RSPR_RSP_Pos 0 +#define HSMCI_RSPR_RSP_Msk (0xffffffffu << HSMCI_RSPR_RSP_Pos) /**< \brief (HSMCI_RSPR[4]) Response */ +/* -------- HSMCI_RDR : (HSMCI Offset: 0x30) Receive Data Register -------- */ +#define HSMCI_RDR_DATA_Pos 0 +#define HSMCI_RDR_DATA_Msk (0xffffffffu << HSMCI_RDR_DATA_Pos) /**< \brief (HSMCI_RDR) Data to Read */ +/* -------- HSMCI_TDR : (HSMCI Offset: 0x34) Transmit Data Register -------- */ +#define HSMCI_TDR_DATA_Pos 0 +#define HSMCI_TDR_DATA_Msk (0xffffffffu << HSMCI_TDR_DATA_Pos) /**< \brief (HSMCI_TDR) Data to Write */ +#define HSMCI_TDR_DATA(value) ((HSMCI_TDR_DATA_Msk & ((value) << HSMCI_TDR_DATA_Pos))) +/* -------- HSMCI_SR : (HSMCI Offset: 0x40) Status Register -------- */ +#define HSMCI_SR_CMDRDY (0x1u << 0) /**< \brief (HSMCI_SR) Command Ready */ +#define HSMCI_SR_RXRDY (0x1u << 1) /**< \brief (HSMCI_SR) Receiver Ready */ +#define HSMCI_SR_TXRDY (0x1u << 2) /**< \brief (HSMCI_SR) Transmit Ready */ +#define HSMCI_SR_BLKE (0x1u << 3) /**< \brief (HSMCI_SR) Data Block Ended */ +#define HSMCI_SR_DTIP (0x1u << 4) /**< \brief (HSMCI_SR) Data Transfer in Progress */ +#define HSMCI_SR_NOTBUSY (0x1u << 5) /**< \brief (HSMCI_SR) HSMCI Not Busy */ +#define HSMCI_SR_ENDRX (0x1u << 6) /**< \brief (HSMCI_SR) End of RX Buffer */ +#define HSMCI_SR_ENDTX (0x1u << 7) /**< \brief (HSMCI_SR) End of TX Buffer */ +#define HSMCI_SR_SDIOIRQA (0x1u << 8) /**< \brief (HSMCI_SR) SDIO Interrupt for Slot A */ +#define HSMCI_SR_SDIOWAIT (0x1u << 12) /**< \brief (HSMCI_SR) SDIO Read Wait Operation Status */ +#define HSMCI_SR_CSRCV (0x1u << 13) /**< \brief (HSMCI_SR) CE-ATA Completion Signal Received */ +#define HSMCI_SR_RXBUFF (0x1u << 14) /**< \brief (HSMCI_SR) RX Buffer Full */ +#define HSMCI_SR_TXBUFE (0x1u << 15) /**< \brief (HSMCI_SR) TX Buffer Empty */ +#define HSMCI_SR_RINDE (0x1u << 16) /**< \brief (HSMCI_SR) Response Index Error */ +#define HSMCI_SR_RDIRE (0x1u << 17) /**< \brief (HSMCI_SR) Response Direction Error */ +#define HSMCI_SR_RCRCE (0x1u << 18) /**< \brief (HSMCI_SR) Response CRC Error */ +#define HSMCI_SR_RENDE (0x1u << 19) /**< \brief (HSMCI_SR) Response End Bit Error */ +#define HSMCI_SR_RTOE (0x1u << 20) /**< \brief (HSMCI_SR) Response Time-out Error */ +#define HSMCI_SR_DCRCE (0x1u << 21) /**< \brief (HSMCI_SR) Data CRC Error */ +#define HSMCI_SR_DTOE (0x1u << 22) /**< \brief (HSMCI_SR) Data Time-out Error */ +#define HSMCI_SR_CSTOE (0x1u << 23) /**< \brief (HSMCI_SR) Completion Signal Time-out Error */ +#define HSMCI_SR_FIFOEMPTY (0x1u << 26) /**< \brief (HSMCI_SR) FIFO empty flag */ +#define HSMCI_SR_XFRDONE (0x1u << 27) /**< \brief (HSMCI_SR) Transfer Done flag */ +#define HSMCI_SR_ACKRCV (0x1u << 28) /**< \brief (HSMCI_SR) Boot Operation Acknowledge Received */ +#define HSMCI_SR_ACKRCVE (0x1u << 29) /**< \brief (HSMCI_SR) Boot Operation Acknowledge Error */ +#define HSMCI_SR_OVRE (0x1u << 30) /**< \brief (HSMCI_SR) Overrun */ +#define HSMCI_SR_UNRE (0x1u << 31) /**< \brief (HSMCI_SR) Underrun */ +/* -------- HSMCI_IER : (HSMCI Offset: 0x44) Interrupt Enable Register -------- */ +#define HSMCI_IER_CMDRDY (0x1u << 0) /**< \brief (HSMCI_IER) Command Ready Interrupt Enable */ +#define HSMCI_IER_RXRDY (0x1u << 1) /**< \brief (HSMCI_IER) Receiver Ready Interrupt Enable */ +#define HSMCI_IER_TXRDY (0x1u << 2) /**< \brief (HSMCI_IER) Transmit Ready Interrupt Enable */ +#define HSMCI_IER_BLKE (0x1u << 3) /**< \brief (HSMCI_IER) Data Block Ended Interrupt Enable */ +#define HSMCI_IER_DTIP (0x1u << 4) /**< \brief (HSMCI_IER) Data Transfer in Progress Interrupt Enable */ +#define HSMCI_IER_NOTBUSY (0x1u << 5) /**< \brief (HSMCI_IER) Data Not Busy Interrupt Enable */ +#define HSMCI_IER_ENDRX (0x1u << 6) /**< \brief (HSMCI_IER) End of Receive Buffer Interrupt Enable */ +#define HSMCI_IER_ENDTX (0x1u << 7) /**< \brief (HSMCI_IER) End of Transmit Buffer Interrupt Enable */ +#define HSMCI_IER_SDIOIRQA (0x1u << 8) /**< \brief (HSMCI_IER) SDIO Interrupt for Slot A Interrupt Enable */ +#define HSMCI_IER_SDIOWAIT (0x1u << 12) /**< \brief (HSMCI_IER) SDIO Read Wait Operation Status Interrupt Enable */ +#define HSMCI_IER_CSRCV (0x1u << 13) /**< \brief (HSMCI_IER) Completion Signal Received Interrupt Enable */ +#define HSMCI_IER_RXBUFF (0x1u << 14) /**< \brief (HSMCI_IER) Receive Buffer Full Interrupt Enable */ +#define HSMCI_IER_TXBUFE (0x1u << 15) /**< \brief (HSMCI_IER) Transmit Buffer Empty Interrupt Enable */ +#define HSMCI_IER_RINDE (0x1u << 16) /**< \brief (HSMCI_IER) Response Index Error Interrupt Enable */ +#define HSMCI_IER_RDIRE (0x1u << 17) /**< \brief (HSMCI_IER) Response Direction Error Interrupt Enable */ +#define HSMCI_IER_RCRCE (0x1u << 18) /**< \brief (HSMCI_IER) Response CRC Error Interrupt Enable */ +#define HSMCI_IER_RENDE (0x1u << 19) /**< \brief (HSMCI_IER) Response End Bit Error Interrupt Enable */ +#define HSMCI_IER_RTOE (0x1u << 20) /**< \brief (HSMCI_IER) Response Time-out Error Interrupt Enable */ +#define HSMCI_IER_DCRCE (0x1u << 21) /**< \brief (HSMCI_IER) Data CRC Error Interrupt Enable */ +#define HSMCI_IER_DTOE (0x1u << 22) /**< \brief (HSMCI_IER) Data Time-out Error Interrupt Enable */ +#define HSMCI_IER_CSTOE (0x1u << 23) /**< \brief (HSMCI_IER) Completion Signal Timeout Error Interrupt Enable */ +#define HSMCI_IER_FIFOEMPTY (0x1u << 26) /**< \brief (HSMCI_IER) FIFO empty Interrupt enable */ +#define HSMCI_IER_XFRDONE (0x1u << 27) /**< \brief (HSMCI_IER) Transfer Done Interrupt enable */ +#define HSMCI_IER_ACKRCV (0x1u << 28) /**< \brief (HSMCI_IER) Boot Acknowledge Interrupt Enable */ +#define HSMCI_IER_ACKRCVE (0x1u << 29) /**< \brief (HSMCI_IER) Boot Acknowledge Error Interrupt Enable */ +#define HSMCI_IER_OVRE (0x1u << 30) /**< \brief (HSMCI_IER) Overrun Interrupt Enable */ +#define HSMCI_IER_UNRE (0x1u << 31) /**< \brief (HSMCI_IER) Underrun Interrupt Enable */ +/* -------- HSMCI_IDR : (HSMCI Offset: 0x48) Interrupt Disable Register -------- */ +#define HSMCI_IDR_CMDRDY (0x1u << 0) /**< \brief (HSMCI_IDR) Command Ready Interrupt Disable */ +#define HSMCI_IDR_RXRDY (0x1u << 1) /**< \brief (HSMCI_IDR) Receiver Ready Interrupt Disable */ +#define HSMCI_IDR_TXRDY (0x1u << 2) /**< \brief (HSMCI_IDR) Transmit Ready Interrupt Disable */ +#define HSMCI_IDR_BLKE (0x1u << 3) /**< \brief (HSMCI_IDR) Data Block Ended Interrupt Disable */ +#define HSMCI_IDR_DTIP (0x1u << 4) /**< \brief (HSMCI_IDR) Data Transfer in Progress Interrupt Disable */ +#define HSMCI_IDR_NOTBUSY (0x1u << 5) /**< \brief (HSMCI_IDR) Data Not Busy Interrupt Disable */ +#define HSMCI_IDR_ENDRX (0x1u << 6) /**< \brief (HSMCI_IDR) End of Receive Buffer Interrupt Disable */ +#define HSMCI_IDR_ENDTX (0x1u << 7) /**< \brief (HSMCI_IDR) End of Transmit Buffer Interrupt Disable */ +#define HSMCI_IDR_SDIOIRQA (0x1u << 8) /**< \brief (HSMCI_IDR) SDIO Interrupt for Slot A Interrupt Disable */ +#define HSMCI_IDR_SDIOWAIT (0x1u << 12) /**< \brief (HSMCI_IDR) SDIO Read Wait Operation Status Interrupt Disable */ +#define HSMCI_IDR_CSRCV (0x1u << 13) /**< \brief (HSMCI_IDR) Completion Signal received interrupt Disable */ +#define HSMCI_IDR_RXBUFF (0x1u << 14) /**< \brief (HSMCI_IDR) Receive Buffer Full Interrupt Disable */ +#define HSMCI_IDR_TXBUFE (0x1u << 15) /**< \brief (HSMCI_IDR) Transmit Buffer Empty Interrupt Disable */ +#define HSMCI_IDR_RINDE (0x1u << 16) /**< \brief (HSMCI_IDR) Response Index Error Interrupt Disable */ +#define HSMCI_IDR_RDIRE (0x1u << 17) /**< \brief (HSMCI_IDR) Response Direction Error Interrupt Disable */ +#define HSMCI_IDR_RCRCE (0x1u << 18) /**< \brief (HSMCI_IDR) Response CRC Error Interrupt Disable */ +#define HSMCI_IDR_RENDE (0x1u << 19) /**< \brief (HSMCI_IDR) Response End Bit Error Interrupt Disable */ +#define HSMCI_IDR_RTOE (0x1u << 20) /**< \brief (HSMCI_IDR) Response Time-out Error Interrupt Disable */ +#define HSMCI_IDR_DCRCE (0x1u << 21) /**< \brief (HSMCI_IDR) Data CRC Error Interrupt Disable */ +#define HSMCI_IDR_DTOE (0x1u << 22) /**< \brief (HSMCI_IDR) Data Time-out Error Interrupt Disable */ +#define HSMCI_IDR_CSTOE (0x1u << 23) /**< \brief (HSMCI_IDR) Completion Signal Time out Error Interrupt Disable */ +#define HSMCI_IDR_FIFOEMPTY (0x1u << 26) /**< \brief (HSMCI_IDR) FIFO empty Interrupt Disable */ +#define HSMCI_IDR_XFRDONE (0x1u << 27) /**< \brief (HSMCI_IDR) Transfer Done Interrupt Disable */ +#define HSMCI_IDR_ACKRCV (0x1u << 28) /**< \brief (HSMCI_IDR) Boot Acknowledge Interrupt Disable */ +#define HSMCI_IDR_ACKRCVE (0x1u << 29) /**< \brief (HSMCI_IDR) Boot Acknowledge Error Interrupt Disable */ +#define HSMCI_IDR_OVRE (0x1u << 30) /**< \brief (HSMCI_IDR) Overrun Interrupt Disable */ +#define HSMCI_IDR_UNRE (0x1u << 31) /**< \brief (HSMCI_IDR) Underrun Interrupt Disable */ +/* -------- HSMCI_IMR : (HSMCI Offset: 0x4C) Interrupt Mask Register -------- */ +#define HSMCI_IMR_CMDRDY (0x1u << 0) /**< \brief (HSMCI_IMR) Command Ready Interrupt Mask */ +#define HSMCI_IMR_RXRDY (0x1u << 1) /**< \brief (HSMCI_IMR) Receiver Ready Interrupt Mask */ +#define HSMCI_IMR_TXRDY (0x1u << 2) /**< \brief (HSMCI_IMR) Transmit Ready Interrupt Mask */ +#define HSMCI_IMR_BLKE (0x1u << 3) /**< \brief (HSMCI_IMR) Data Block Ended Interrupt Mask */ +#define HSMCI_IMR_DTIP (0x1u << 4) /**< \brief (HSMCI_IMR) Data Transfer in Progress Interrupt Mask */ +#define HSMCI_IMR_NOTBUSY (0x1u << 5) /**< \brief (HSMCI_IMR) Data Not Busy Interrupt Mask */ +#define HSMCI_IMR_ENDRX (0x1u << 6) /**< \brief (HSMCI_IMR) End of Receive Buffer Interrupt Mask */ +#define HSMCI_IMR_ENDTX (0x1u << 7) /**< \brief (HSMCI_IMR) End of Transmit Buffer Interrupt Mask */ +#define HSMCI_IMR_SDIOIRQA (0x1u << 8) /**< \brief (HSMCI_IMR) SDIO Interrupt for Slot A Interrupt Mask */ +#define HSMCI_IMR_SDIOWAIT (0x1u << 12) /**< \brief (HSMCI_IMR) SDIO Read Wait Operation Status Interrupt Mask */ +#define HSMCI_IMR_CSRCV (0x1u << 13) /**< \brief (HSMCI_IMR) Completion Signal Received Interrupt Mask */ +#define HSMCI_IMR_RXBUFF (0x1u << 14) /**< \brief (HSMCI_IMR) Receive Buffer Full Interrupt Mask */ +#define HSMCI_IMR_TXBUFE (0x1u << 15) /**< \brief (HSMCI_IMR) Transmit Buffer Empty Interrupt Mask */ +#define HSMCI_IMR_RINDE (0x1u << 16) /**< \brief (HSMCI_IMR) Response Index Error Interrupt Mask */ +#define HSMCI_IMR_RDIRE (0x1u << 17) /**< \brief (HSMCI_IMR) Response Direction Error Interrupt Mask */ +#define HSMCI_IMR_RCRCE (0x1u << 18) /**< \brief (HSMCI_IMR) Response CRC Error Interrupt Mask */ +#define HSMCI_IMR_RENDE (0x1u << 19) /**< \brief (HSMCI_IMR) Response End Bit Error Interrupt Mask */ +#define HSMCI_IMR_RTOE (0x1u << 20) /**< \brief (HSMCI_IMR) Response Time-out Error Interrupt Mask */ +#define HSMCI_IMR_DCRCE (0x1u << 21) /**< \brief (HSMCI_IMR) Data CRC Error Interrupt Mask */ +#define HSMCI_IMR_DTOE (0x1u << 22) /**< \brief (HSMCI_IMR) Data Time-out Error Interrupt Mask */ +#define HSMCI_IMR_CSTOE (0x1u << 23) /**< \brief (HSMCI_IMR) Completion Signal Time-out Error Interrupt Mask */ +#define HSMCI_IMR_FIFOEMPTY (0x1u << 26) /**< \brief (HSMCI_IMR) FIFO Empty Interrupt Mask */ +#define HSMCI_IMR_XFRDONE (0x1u << 27) /**< \brief (HSMCI_IMR) Transfer Done Interrupt Mask */ +#define HSMCI_IMR_ACKRCV (0x1u << 28) /**< \brief (HSMCI_IMR) Boot Operation Acknowledge Received Interrupt Mask */ +#define HSMCI_IMR_ACKRCVE (0x1u << 29) /**< \brief (HSMCI_IMR) Boot Operation Acknowledge Error Interrupt Mask */ +#define HSMCI_IMR_OVRE (0x1u << 30) /**< \brief (HSMCI_IMR) Overrun Interrupt Mask */ +#define HSMCI_IMR_UNRE (0x1u << 31) /**< \brief (HSMCI_IMR) Underrun Interrupt Mask */ +/* -------- HSMCI_CFG : (HSMCI Offset: 0x54) Configuration Register -------- */ +#define HSMCI_CFG_FIFOMODE (0x1u << 0) /**< \brief (HSMCI_CFG) HSMCI Internal FIFO control mode */ +#define HSMCI_CFG_FERRCTRL (0x1u << 4) /**< \brief (HSMCI_CFG) Flow Error flag reset control mode */ +#define HSMCI_CFG_HSMODE (0x1u << 8) /**< \brief (HSMCI_CFG) High Speed Mode */ +#define HSMCI_CFG_LSYNC (0x1u << 12) /**< \brief (HSMCI_CFG) Synchronize on the last block */ +/* -------- HSMCI_WPMR : (HSMCI Offset: 0xE4) Write Protection Mode Register -------- */ +#define HSMCI_WPMR_WP_EN (0x1u << 0) /**< \brief (HSMCI_WPMR) Write Protection Enable */ +#define HSMCI_WPMR_WP_KEY_Pos 8 +#define HSMCI_WPMR_WP_KEY_Msk (0xffffffu << HSMCI_WPMR_WP_KEY_Pos) /**< \brief (HSMCI_WPMR) Write Protection Key password */ +#define HSMCI_WPMR_WP_KEY(value) ((HSMCI_WPMR_WP_KEY_Msk & ((value) << HSMCI_WPMR_WP_KEY_Pos))) +/* -------- HSMCI_WPSR : (HSMCI Offset: 0xE8) Write Protection Status Register -------- */ +#define HSMCI_WPSR_WP_VS_Pos 0 +#define HSMCI_WPSR_WP_VS_Msk (0xfu << HSMCI_WPSR_WP_VS_Pos) /**< \brief (HSMCI_WPSR) Write Protection Violation Status */ +#define HSMCI_WPSR_WP_VS_NONE (0x0u << 0) /**< \brief (HSMCI_WPSR) No Write Protection Violation occurred since the last read of this register (WP_SR) */ +#define HSMCI_WPSR_WP_VS_WRITE (0x1u << 0) /**< \brief (HSMCI_WPSR) Write Protection detected unauthorized attempt to write a control register had occurred (since the last read.) */ +#define HSMCI_WPSR_WP_VS_RESET (0x2u << 0) /**< \brief (HSMCI_WPSR) Software reset had been performed while Write Protection was enabled (since the last read). */ +#define HSMCI_WPSR_WP_VS_BOTH (0x3u << 0) /**< \brief (HSMCI_WPSR) Both Write Protection violation and software reset with Write Protection enabled have occurred since the last read. */ +#define HSMCI_WPSR_WP_VSRC_Pos 8 +#define HSMCI_WPSR_WP_VSRC_Msk (0xffffu << HSMCI_WPSR_WP_VSRC_Pos) /**< \brief (HSMCI_WPSR) Write Protection Violation SouRCe */ +/* -------- HSMCI_RPR : (HSMCI Offset: 0x100) Receive Pointer Register -------- */ +#define HSMCI_RPR_RXPTR_Pos 0 +#define HSMCI_RPR_RXPTR_Msk (0xffffffffu << HSMCI_RPR_RXPTR_Pos) /**< \brief (HSMCI_RPR) Receive Pointer Register */ +#define HSMCI_RPR_RXPTR(value) ((HSMCI_RPR_RXPTR_Msk & ((value) << HSMCI_RPR_RXPTR_Pos))) +/* -------- HSMCI_RCR : (HSMCI Offset: 0x104) Receive Counter Register -------- */ +#define HSMCI_RCR_RXCTR_Pos 0 +#define HSMCI_RCR_RXCTR_Msk (0xffffu << HSMCI_RCR_RXCTR_Pos) /**< \brief (HSMCI_RCR) Receive Counter Register */ +#define HSMCI_RCR_RXCTR(value) ((HSMCI_RCR_RXCTR_Msk & ((value) << HSMCI_RCR_RXCTR_Pos))) +/* -------- HSMCI_TPR : (HSMCI Offset: 0x108) Transmit Pointer Register -------- */ +#define HSMCI_TPR_TXPTR_Pos 0 +#define HSMCI_TPR_TXPTR_Msk (0xffffffffu << HSMCI_TPR_TXPTR_Pos) /**< \brief (HSMCI_TPR) Transmit Counter Register */ +#define HSMCI_TPR_TXPTR(value) ((HSMCI_TPR_TXPTR_Msk & ((value) << HSMCI_TPR_TXPTR_Pos))) +/* -------- HSMCI_TCR : (HSMCI Offset: 0x10C) Transmit Counter Register -------- */ +#define HSMCI_TCR_TXCTR_Pos 0 +#define HSMCI_TCR_TXCTR_Msk (0xffffu << HSMCI_TCR_TXCTR_Pos) /**< \brief (HSMCI_TCR) Transmit Counter Register */ +#define HSMCI_TCR_TXCTR(value) ((HSMCI_TCR_TXCTR_Msk & ((value) << HSMCI_TCR_TXCTR_Pos))) +/* -------- HSMCI_RNPR : (HSMCI Offset: 0x110) Receive Next Pointer Register -------- */ +#define HSMCI_RNPR_RXNPTR_Pos 0 +#define HSMCI_RNPR_RXNPTR_Msk (0xffffffffu << HSMCI_RNPR_RXNPTR_Pos) /**< \brief (HSMCI_RNPR) Receive Next Pointer */ +#define HSMCI_RNPR_RXNPTR(value) ((HSMCI_RNPR_RXNPTR_Msk & ((value) << HSMCI_RNPR_RXNPTR_Pos))) +/* -------- HSMCI_RNCR : (HSMCI Offset: 0x114) Receive Next Counter Register -------- */ +#define HSMCI_RNCR_RXNCTR_Pos 0 +#define HSMCI_RNCR_RXNCTR_Msk (0xffffu << HSMCI_RNCR_RXNCTR_Pos) /**< \brief (HSMCI_RNCR) Receive Next Counter */ +#define HSMCI_RNCR_RXNCTR(value) ((HSMCI_RNCR_RXNCTR_Msk & ((value) << HSMCI_RNCR_RXNCTR_Pos))) +/* -------- HSMCI_TNPR : (HSMCI Offset: 0x118) Transmit Next Pointer Register -------- */ +#define HSMCI_TNPR_TXNPTR_Pos 0 +#define HSMCI_TNPR_TXNPTR_Msk (0xffffffffu << HSMCI_TNPR_TXNPTR_Pos) /**< \brief (HSMCI_TNPR) Transmit Next Pointer */ +#define HSMCI_TNPR_TXNPTR(value) ((HSMCI_TNPR_TXNPTR_Msk & ((value) << HSMCI_TNPR_TXNPTR_Pos))) +/* -------- HSMCI_TNCR : (HSMCI Offset: 0x11C) Transmit Next Counter Register -------- */ +#define HSMCI_TNCR_TXNCTR_Pos 0 +#define HSMCI_TNCR_TXNCTR_Msk (0xffffu << HSMCI_TNCR_TXNCTR_Pos) /**< \brief (HSMCI_TNCR) Transmit Counter Next */ +#define HSMCI_TNCR_TXNCTR(value) ((HSMCI_TNCR_TXNCTR_Msk & ((value) << HSMCI_TNCR_TXNCTR_Pos))) +/* -------- HSMCI_PTCR : (HSMCI Offset: 0x120) Transfer Control Register -------- */ +#define HSMCI_PTCR_RXTEN (0x1u << 0) /**< \brief (HSMCI_PTCR) Receiver Transfer Enable */ +#define HSMCI_PTCR_RXTDIS (0x1u << 1) /**< \brief (HSMCI_PTCR) Receiver Transfer Disable */ +#define HSMCI_PTCR_TXTEN (0x1u << 8) /**< \brief (HSMCI_PTCR) Transmitter Transfer Enable */ +#define HSMCI_PTCR_TXTDIS (0x1u << 9) /**< \brief (HSMCI_PTCR) Transmitter Transfer Disable */ +/* -------- HSMCI_PTSR : (HSMCI Offset: 0x124) Transfer Status Register -------- */ +#define HSMCI_PTSR_RXTEN (0x1u << 0) /**< \brief (HSMCI_PTSR) Receiver Transfer Enable */ +#define HSMCI_PTSR_TXTEN (0x1u << 8) /**< \brief (HSMCI_PTSR) Transmitter Transfer Enable */ +/* -------- HSMCI_FIFO[256] : (HSMCI Offset: 0x200) FIFO Memory Aperture0 -------- */ +#define HSMCI_FIFO_DATA_Pos 0 +#define HSMCI_FIFO_DATA_Msk (0xffffffffu << HSMCI_FIFO_DATA_Pos) /**< \brief (HSMCI_FIFO[256]) Data to Read or Data to Write */ +#define HSMCI_FIFO_DATA(value) ((HSMCI_FIFO_DATA_Msk & ((value) << HSMCI_FIFO_DATA_Pos))) + +/*@}*/ + + +#endif /* _SAM4S_HSMCI_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_matrix.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_matrix.h new file mode 100644 index 0000000..0d901a5 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_matrix.h
@@ -0,0 +1,198 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_MATRIX_COMPONENT_ +#define _SAM4S_MATRIX_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR AHB Bus Matrix */ +/* ============================================================================= */ +/** \addtogroup SAM4S_MATRIX AHB Bus Matrix */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Matrix hardware registers */ +typedef struct { + RwReg MATRIX_MCFG[4]; /**< \brief (Matrix Offset: 0x0000) Master Configuration Register */ + RoReg Reserved1[12]; + RwReg MATRIX_SCFG[5]; /**< \brief (Matrix Offset: 0x0040) Slave Configuration Register */ + RoReg Reserved2[11]; + RwReg MATRIX_PRAS0; /**< \brief (Matrix Offset: 0x0080) Priority Register A for Slave 0 */ + RoReg Reserved3[1]; + RwReg MATRIX_PRAS1; /**< \brief (Matrix Offset: 0x0088) Priority Register A for Slave 1 */ + RoReg Reserved4[1]; + RwReg MATRIX_PRAS2; /**< \brief (Matrix Offset: 0x0090) Priority Register A for Slave 2 */ + RoReg Reserved5[1]; + RwReg MATRIX_PRAS3; /**< \brief (Matrix Offset: 0x0098) Priority Register A for Slave 3 */ + RoReg Reserved6[1]; + RwReg MATRIX_PRAS4; /**< \brief (Matrix Offset: 0x00A0) Priority Register A for Slave 4 */ + RoReg Reserved7[1]; + RoReg Reserved8[27]; + RwReg CCFG_SYSIO; /**< \brief (Matrix Offset: 0x0114) System I/O Configuration register */ + RoReg Reserved9[1]; + RwReg CCFG_SMCNFCS; /**< \brief (Matrix Offset: 0x011C) SMC Chip Select NAND Flash Assignment Register */ + RoReg Reserved10[49]; + RwReg MATRIX_WPMR; /**< \brief (Matrix Offset: 0x1E4) Write Protect Mode Register */ + RoReg MATRIX_WPSR; /**< \brief (Matrix Offset: 0x1E8) Write Protect Status Register */ +} Matrix; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- MATRIX_MCFG[4] : (MATRIX Offset: 0x0000) Master Configuration Register -------- */ +#define MATRIX_MCFG_ULBT_Pos 0 +#define MATRIX_MCFG_ULBT_Msk (0x7u << MATRIX_MCFG_ULBT_Pos) /**< \brief (MATRIX_MCFG[4]) Undefined Length Burst Type */ +#define MATRIX_MCFG_ULBT(value) ((MATRIX_MCFG_ULBT_Msk & ((value) << MATRIX_MCFG_ULBT_Pos))) +/* -------- MATRIX_SCFG[5] : (MATRIX Offset: 0x0040) Slave Configuration Register -------- */ +#define MATRIX_SCFG_SLOT_CYCLE_Pos 0 +#define MATRIX_SCFG_SLOT_CYCLE_Msk (0xffu << MATRIX_SCFG_SLOT_CYCLE_Pos) /**< \brief (MATRIX_SCFG[5]) Maximum Number of Allowed Cycles for a Burst */ +#define MATRIX_SCFG_SLOT_CYCLE(value) ((MATRIX_SCFG_SLOT_CYCLE_Msk & ((value) << MATRIX_SCFG_SLOT_CYCLE_Pos))) +#define MATRIX_SCFG_DEFMSTR_TYPE_Pos 16 +#define MATRIX_SCFG_DEFMSTR_TYPE_Msk (0x3u << MATRIX_SCFG_DEFMSTR_TYPE_Pos) /**< \brief (MATRIX_SCFG[5]) Default Master Type */ +#define MATRIX_SCFG_DEFMSTR_TYPE(value) ((MATRIX_SCFG_DEFMSTR_TYPE_Msk & ((value) << MATRIX_SCFG_DEFMSTR_TYPE_Pos))) +#define MATRIX_SCFG_FIXED_DEFMSTR_Pos 18 +#define MATRIX_SCFG_FIXED_DEFMSTR_Msk (0x7u << MATRIX_SCFG_FIXED_DEFMSTR_Pos) /**< \brief (MATRIX_SCFG[5]) Fixed Default Master */ +#define MATRIX_SCFG_FIXED_DEFMSTR(value) ((MATRIX_SCFG_FIXED_DEFMSTR_Msk & ((value) << MATRIX_SCFG_FIXED_DEFMSTR_Pos))) +#define MATRIX_SCFG_ARBT_Pos 24 +#define MATRIX_SCFG_ARBT_Msk (0x3u << MATRIX_SCFG_ARBT_Pos) /**< \brief (MATRIX_SCFG[5]) Arbitration Type */ +#define MATRIX_SCFG_ARBT(value) ((MATRIX_SCFG_ARBT_Msk & ((value) << MATRIX_SCFG_ARBT_Pos))) +/* -------- MATRIX_PRAS0 : (MATRIX Offset: 0x0080) Priority Register A for Slave 0 -------- */ +#define MATRIX_PRAS0_M0PR_Pos 0 +#define MATRIX_PRAS0_M0PR_Msk (0x3u << MATRIX_PRAS0_M0PR_Pos) /**< \brief (MATRIX_PRAS0) Master 0 Priority */ +#define MATRIX_PRAS0_M0PR(value) ((MATRIX_PRAS0_M0PR_Msk & ((value) << MATRIX_PRAS0_M0PR_Pos))) +#define MATRIX_PRAS0_M1PR_Pos 4 +#define MATRIX_PRAS0_M1PR_Msk (0x3u << MATRIX_PRAS0_M1PR_Pos) /**< \brief (MATRIX_PRAS0) Master 1 Priority */ +#define MATRIX_PRAS0_M1PR(value) ((MATRIX_PRAS0_M1PR_Msk & ((value) << MATRIX_PRAS0_M1PR_Pos))) +#define MATRIX_PRAS0_M2PR_Pos 8 +#define MATRIX_PRAS0_M2PR_Msk (0x3u << MATRIX_PRAS0_M2PR_Pos) /**< \brief (MATRIX_PRAS0) Master 2 Priority */ +#define MATRIX_PRAS0_M2PR(value) ((MATRIX_PRAS0_M2PR_Msk & ((value) << MATRIX_PRAS0_M2PR_Pos))) +#define MATRIX_PRAS0_M3PR_Pos 12 +#define MATRIX_PRAS0_M3PR_Msk (0x3u << MATRIX_PRAS0_M3PR_Pos) /**< \brief (MATRIX_PRAS0) Master 3 Priority */ +#define MATRIX_PRAS0_M3PR(value) ((MATRIX_PRAS0_M3PR_Msk & ((value) << MATRIX_PRAS0_M3PR_Pos))) +#define MATRIX_PRAS0_M4PR_Pos 16 +#define MATRIX_PRAS0_M4PR_Msk (0x3u << MATRIX_PRAS0_M4PR_Pos) /**< \brief (MATRIX_PRAS0) Master 4 Priority */ +#define MATRIX_PRAS0_M4PR(value) ((MATRIX_PRAS0_M4PR_Msk & ((value) << MATRIX_PRAS0_M4PR_Pos))) +/* -------- MATRIX_PRAS1 : (MATRIX Offset: 0x0088) Priority Register A for Slave 1 -------- */ +#define MATRIX_PRAS1_M0PR_Pos 0 +#define MATRIX_PRAS1_M0PR_Msk (0x3u << MATRIX_PRAS1_M0PR_Pos) /**< \brief (MATRIX_PRAS1) Master 0 Priority */ +#define MATRIX_PRAS1_M0PR(value) ((MATRIX_PRAS1_M0PR_Msk & ((value) << MATRIX_PRAS1_M0PR_Pos))) +#define MATRIX_PRAS1_M1PR_Pos 4 +#define MATRIX_PRAS1_M1PR_Msk (0x3u << MATRIX_PRAS1_M1PR_Pos) /**< \brief (MATRIX_PRAS1) Master 1 Priority */ +#define MATRIX_PRAS1_M1PR(value) ((MATRIX_PRAS1_M1PR_Msk & ((value) << MATRIX_PRAS1_M1PR_Pos))) +#define MATRIX_PRAS1_M2PR_Pos 8 +#define MATRIX_PRAS1_M2PR_Msk (0x3u << MATRIX_PRAS1_M2PR_Pos) /**< \brief (MATRIX_PRAS1) Master 2 Priority */ +#define MATRIX_PRAS1_M2PR(value) ((MATRIX_PRAS1_M2PR_Msk & ((value) << MATRIX_PRAS1_M2PR_Pos))) +#define MATRIX_PRAS1_M3PR_Pos 12 +#define MATRIX_PRAS1_M3PR_Msk (0x3u << MATRIX_PRAS1_M3PR_Pos) /**< \brief (MATRIX_PRAS1) Master 3 Priority */ +#define MATRIX_PRAS1_M3PR(value) ((MATRIX_PRAS1_M3PR_Msk & ((value) << MATRIX_PRAS1_M3PR_Pos))) +#define MATRIX_PRAS1_M4PR_Pos 16 +#define MATRIX_PRAS1_M4PR_Msk (0x3u << MATRIX_PRAS1_M4PR_Pos) /**< \brief (MATRIX_PRAS1) Master 4 Priority */ +#define MATRIX_PRAS1_M4PR(value) ((MATRIX_PRAS1_M4PR_Msk & ((value) << MATRIX_PRAS1_M4PR_Pos))) +/* -------- MATRIX_PRAS2 : (MATRIX Offset: 0x0090) Priority Register A for Slave 2 -------- */ +#define MATRIX_PRAS2_M0PR_Pos 0 +#define MATRIX_PRAS2_M0PR_Msk (0x3u << MATRIX_PRAS2_M0PR_Pos) /**< \brief (MATRIX_PRAS2) Master 0 Priority */ +#define MATRIX_PRAS2_M0PR(value) ((MATRIX_PRAS2_M0PR_Msk & ((value) << MATRIX_PRAS2_M0PR_Pos))) +#define MATRIX_PRAS2_M1PR_Pos 4 +#define MATRIX_PRAS2_M1PR_Msk (0x3u << MATRIX_PRAS2_M1PR_Pos) /**< \brief (MATRIX_PRAS2) Master 1 Priority */ +#define MATRIX_PRAS2_M1PR(value) ((MATRIX_PRAS2_M1PR_Msk & ((value) << MATRIX_PRAS2_M1PR_Pos))) +#define MATRIX_PRAS2_M2PR_Pos 8 +#define MATRIX_PRAS2_M2PR_Msk (0x3u << MATRIX_PRAS2_M2PR_Pos) /**< \brief (MATRIX_PRAS2) Master 2 Priority */ +#define MATRIX_PRAS2_M2PR(value) ((MATRIX_PRAS2_M2PR_Msk & ((value) << MATRIX_PRAS2_M2PR_Pos))) +#define MATRIX_PRAS2_M3PR_Pos 12 +#define MATRIX_PRAS2_M3PR_Msk (0x3u << MATRIX_PRAS2_M3PR_Pos) /**< \brief (MATRIX_PRAS2) Master 3 Priority */ +#define MATRIX_PRAS2_M3PR(value) ((MATRIX_PRAS2_M3PR_Msk & ((value) << MATRIX_PRAS2_M3PR_Pos))) +#define MATRIX_PRAS2_M4PR_Pos 16 +#define MATRIX_PRAS2_M4PR_Msk (0x3u << MATRIX_PRAS2_M4PR_Pos) /**< \brief (MATRIX_PRAS2) Master 4 Priority */ +#define MATRIX_PRAS2_M4PR(value) ((MATRIX_PRAS2_M4PR_Msk & ((value) << MATRIX_PRAS2_M4PR_Pos))) +/* -------- MATRIX_PRAS3 : (MATRIX Offset: 0x0098) Priority Register A for Slave 3 -------- */ +#define MATRIX_PRAS3_M0PR_Pos 0 +#define MATRIX_PRAS3_M0PR_Msk (0x3u << MATRIX_PRAS3_M0PR_Pos) /**< \brief (MATRIX_PRAS3) Master 0 Priority */ +#define MATRIX_PRAS3_M0PR(value) ((MATRIX_PRAS3_M0PR_Msk & ((value) << MATRIX_PRAS3_M0PR_Pos))) +#define MATRIX_PRAS3_M1PR_Pos 4 +#define MATRIX_PRAS3_M1PR_Msk (0x3u << MATRIX_PRAS3_M1PR_Pos) /**< \brief (MATRIX_PRAS3) Master 1 Priority */ +#define MATRIX_PRAS3_M1PR(value) ((MATRIX_PRAS3_M1PR_Msk & ((value) << MATRIX_PRAS3_M1PR_Pos))) +#define MATRIX_PRAS3_M2PR_Pos 8 +#define MATRIX_PRAS3_M2PR_Msk (0x3u << MATRIX_PRAS3_M2PR_Pos) /**< \brief (MATRIX_PRAS3) Master 2 Priority */ +#define MATRIX_PRAS3_M2PR(value) ((MATRIX_PRAS3_M2PR_Msk & ((value) << MATRIX_PRAS3_M2PR_Pos))) +#define MATRIX_PRAS3_M3PR_Pos 12 +#define MATRIX_PRAS3_M3PR_Msk (0x3u << MATRIX_PRAS3_M3PR_Pos) /**< \brief (MATRIX_PRAS3) Master 3 Priority */ +#define MATRIX_PRAS3_M3PR(value) ((MATRIX_PRAS3_M3PR_Msk & ((value) << MATRIX_PRAS3_M3PR_Pos))) +#define MATRIX_PRAS3_M4PR_Pos 16 +#define MATRIX_PRAS3_M4PR_Msk (0x3u << MATRIX_PRAS3_M4PR_Pos) /**< \brief (MATRIX_PRAS3) Master 4 Priority */ +#define MATRIX_PRAS3_M4PR(value) ((MATRIX_PRAS3_M4PR_Msk & ((value) << MATRIX_PRAS3_M4PR_Pos))) +/* -------- MATRIX_PRAS4 : (MATRIX Offset: 0x00A0) Priority Register A for Slave 4 -------- */ +#define MATRIX_PRAS4_M0PR_Pos 0 +#define MATRIX_PRAS4_M0PR_Msk (0x3u << MATRIX_PRAS4_M0PR_Pos) /**< \brief (MATRIX_PRAS4) Master 0 Priority */ +#define MATRIX_PRAS4_M0PR(value) ((MATRIX_PRAS4_M0PR_Msk & ((value) << MATRIX_PRAS4_M0PR_Pos))) +#define MATRIX_PRAS4_M1PR_Pos 4 +#define MATRIX_PRAS4_M1PR_Msk (0x3u << MATRIX_PRAS4_M1PR_Pos) /**< \brief (MATRIX_PRAS4) Master 1 Priority */ +#define MATRIX_PRAS4_M1PR(value) ((MATRIX_PRAS4_M1PR_Msk & ((value) << MATRIX_PRAS4_M1PR_Pos))) +#define MATRIX_PRAS4_M2PR_Pos 8 +#define MATRIX_PRAS4_M2PR_Msk (0x3u << MATRIX_PRAS4_M2PR_Pos) /**< \brief (MATRIX_PRAS4) Master 2 Priority */ +#define MATRIX_PRAS4_M2PR(value) ((MATRIX_PRAS4_M2PR_Msk & ((value) << MATRIX_PRAS4_M2PR_Pos))) +#define MATRIX_PRAS4_M3PR_Pos 12 +#define MATRIX_PRAS4_M3PR_Msk (0x3u << MATRIX_PRAS4_M3PR_Pos) /**< \brief (MATRIX_PRAS4) Master 3 Priority */ +#define MATRIX_PRAS4_M3PR(value) ((MATRIX_PRAS4_M3PR_Msk & ((value) << MATRIX_PRAS4_M3PR_Pos))) +#define MATRIX_PRAS4_M4PR_Pos 16 +#define MATRIX_PRAS4_M4PR_Msk (0x3u << MATRIX_PRAS4_M4PR_Pos) /**< \brief (MATRIX_PRAS4) Master 4 Priority */ +#define MATRIX_PRAS4_M4PR(value) ((MATRIX_PRAS4_M4PR_Msk & ((value) << MATRIX_PRAS4_M4PR_Pos))) +/* -------- CCFG_SYSIO : (MATRIX Offset: 0x0114) System I/O Configuration register -------- */ +#define CCFG_SYSIO_SYSIO4 (0x1u << 4) /**< \brief (CCFG_SYSIO) PB4 or TDI Assignment */ +#define CCFG_SYSIO_SYSIO5 (0x1u << 5) /**< \brief (CCFG_SYSIO) PB5 or TDO/TRACESWO Assignment */ +#define CCFG_SYSIO_SYSIO6 (0x1u << 6) /**< \brief (CCFG_SYSIO) PB6 or TMS/SWDIO Assignment */ +#define CCFG_SYSIO_SYSIO7 (0x1u << 7) /**< \brief (CCFG_SYSIO) PB7 or TCK/SWCLK Assignment */ +#define CCFG_SYSIO_SYSIO10 (0x1u << 10) /**< \brief (CCFG_SYSIO) PB10 or DDM Assignment */ +#define CCFG_SYSIO_SYSIO11 (0x1u << 11) /**< \brief (CCFG_SYSIO) PB11 or DDP Assignment */ +#define CCFG_SYSIO_SYSIO12 (0x1u << 12) /**< \brief (CCFG_SYSIO) PB12 or ERASE Assignment */ +/* -------- CCFG_SMCNFCS : (MATRIX Offset: 0x011C) SMC Chip Select NAND Flash Assignment Register -------- */ +#define CCFG_SMCNFCS_SMC_NFCS0 (0x1u << 0) /**< \brief (CCFG_SMCNFCS) SMC NAND Flash Chip Select 0 Assignment */ +#define CCFG_SMCNFCS_SMC_NFCS1 (0x1u << 1) /**< \brief (CCFG_SMCNFCS) SMC NAND Flash Chip Select 1 Assignment */ +#define CCFG_SMCNFCS_SMC_NFCS2 (0x1u << 2) /**< \brief (CCFG_SMCNFCS) SMC NAND Flash Chip Select 2 Assignment */ +#define CCFG_SMCNFCS_SMC_NFCS3 (0x1u << 3) /**< \brief (CCFG_SMCNFCS) SMC NAND Flash Chip Select 3 Assignment */ +/* -------- MATRIX_WPMR : (MATRIX Offset: 0x1E4) Write Protect Mode Register -------- */ +#define MATRIX_WPMR_WPEN (0x1u << 0) /**< \brief (MATRIX_WPMR) Write Protect ENable */ +#define MATRIX_WPMR_WPKEY_Pos 8 +#define MATRIX_WPMR_WPKEY_Msk (0xffffffu << MATRIX_WPMR_WPKEY_Pos) /**< \brief (MATRIX_WPMR) Write Protect KEY (Write-only) */ +#define MATRIX_WPMR_WPKEY(value) ((MATRIX_WPMR_WPKEY_Msk & ((value) << MATRIX_WPMR_WPKEY_Pos))) +/* -------- MATRIX_WPSR : (MATRIX Offset: 0x1E8) Write Protect Status Register -------- */ +#define MATRIX_WPSR_WPVS (0x1u << 0) /**< \brief (MATRIX_WPSR) Write Protect Violation Status */ +#define MATRIX_WPSR_WPVSRC_Pos 8 +#define MATRIX_WPSR_WPVSRC_Msk (0xffffu << MATRIX_WPSR_WPVSRC_Pos) /**< \brief (MATRIX_WPSR) Write Protect Violation Source */ + +/*@}*/ + + +#endif /* _SAM4S_MATRIX_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_pdc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_pdc.h new file mode 100644 index 0000000..0792c54 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_pdc.h
@@ -0,0 +1,108 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_PDC_COMPONENT_ +#define _SAM4S_PDC_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Peripheral DMA Controller */ +/* ============================================================================= */ +/** \addtogroup SAM4S_PDC Peripheral DMA Controller */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Pdc hardware registers */ +typedef struct { + RwReg PERIPH_RPR; /**< \brief (Pdc Offset: 0x0) Receive Pointer Register */ + RwReg PERIPH_RCR; /**< \brief (Pdc Offset: 0x4) Receive Counter Register */ + RwReg PERIPH_TPR; /**< \brief (Pdc Offset: 0x8) Transmit Pointer Register */ + RwReg PERIPH_TCR; /**< \brief (Pdc Offset: 0xC) Transmit Counter Register */ + RwReg PERIPH_RNPR; /**< \brief (Pdc Offset: 0x10) Receive Next Pointer Register */ + RwReg PERIPH_RNCR; /**< \brief (Pdc Offset: 0x14) Receive Next Counter Register */ + RwReg PERIPH_TNPR; /**< \brief (Pdc Offset: 0x18) Transmit Next Pointer Register */ + RwReg PERIPH_TNCR; /**< \brief (Pdc Offset: 0x1C) Transmit Next Counter Register */ + WoReg PERIPH_PTCR; /**< \brief (Pdc Offset: 0x20) Transfer Control Register */ + RoReg PERIPH_PTSR; /**< \brief (Pdc Offset: 0x24) Transfer Status Register */ +} Pdc; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- PERIPH_RPR : (PDC Offset: 0x0) Receive Pointer Register -------- */ +#define PERIPH_RPR_RXPTR_Pos 0 +#define PERIPH_RPR_RXPTR_Msk (0xffffffffu << PERIPH_RPR_RXPTR_Pos) /**< \brief (PERIPH_RPR) Receive Pointer Register */ +#define PERIPH_RPR_RXPTR(value) ((PERIPH_RPR_RXPTR_Msk & ((value) << PERIPH_RPR_RXPTR_Pos))) +/* -------- PERIPH_RCR : (PDC Offset: 0x4) Receive Counter Register -------- */ +#define PERIPH_RCR_RXCTR_Pos 0 +#define PERIPH_RCR_RXCTR_Msk (0xffffu << PERIPH_RCR_RXCTR_Pos) /**< \brief (PERIPH_RCR) Receive Counter Register */ +#define PERIPH_RCR_RXCTR(value) ((PERIPH_RCR_RXCTR_Msk & ((value) << PERIPH_RCR_RXCTR_Pos))) +/* -------- PERIPH_TPR : (PDC Offset: 0x8) Transmit Pointer Register -------- */ +#define PERIPH_TPR_TXPTR_Pos 0 +#define PERIPH_TPR_TXPTR_Msk (0xffffffffu << PERIPH_TPR_TXPTR_Pos) /**< \brief (PERIPH_TPR) Transmit Counter Register */ +#define PERIPH_TPR_TXPTR(value) ((PERIPH_TPR_TXPTR_Msk & ((value) << PERIPH_TPR_TXPTR_Pos))) +/* -------- PERIPH_TCR : (PDC Offset: 0xC) Transmit Counter Register -------- */ +#define PERIPH_TCR_TXCTR_Pos 0 +#define PERIPH_TCR_TXCTR_Msk (0xffffu << PERIPH_TCR_TXCTR_Pos) /**< \brief (PERIPH_TCR) Transmit Counter Register */ +#define PERIPH_TCR_TXCTR(value) ((PERIPH_TCR_TXCTR_Msk & ((value) << PERIPH_TCR_TXCTR_Pos))) +/* -------- PERIPH_RNPR : (PDC Offset: 0x10) Receive Next Pointer Register -------- */ +#define PERIPH_RNPR_RXNPTR_Pos 0 +#define PERIPH_RNPR_RXNPTR_Msk (0xffffffffu << PERIPH_RNPR_RXNPTR_Pos) /**< \brief (PERIPH_RNPR) Receive Next Pointer */ +#define PERIPH_RNPR_RXNPTR(value) ((PERIPH_RNPR_RXNPTR_Msk & ((value) << PERIPH_RNPR_RXNPTR_Pos))) +/* -------- PERIPH_RNCR : (PDC Offset: 0x14) Receive Next Counter Register -------- */ +#define PERIPH_RNCR_RXNCTR_Pos 0 +#define PERIPH_RNCR_RXNCTR_Msk (0xffffu << PERIPH_RNCR_RXNCTR_Pos) /**< \brief (PERIPH_RNCR) Receive Next Counter */ +#define PERIPH_RNCR_RXNCTR(value) ((PERIPH_RNCR_RXNCTR_Msk & ((value) << PERIPH_RNCR_RXNCTR_Pos))) +/* -------- PERIPH_TNPR : (PDC Offset: 0x18) Transmit Next Pointer Register -------- */ +#define PERIPH_TNPR_TXNPTR_Pos 0 +#define PERIPH_TNPR_TXNPTR_Msk (0xffffffffu << PERIPH_TNPR_TXNPTR_Pos) /**< \brief (PERIPH_TNPR) Transmit Next Pointer */ +#define PERIPH_TNPR_TXNPTR(value) ((PERIPH_TNPR_TXNPTR_Msk & ((value) << PERIPH_TNPR_TXNPTR_Pos))) +/* -------- PERIPH_TNCR : (PDC Offset: 0x1C) Transmit Next Counter Register -------- */ +#define PERIPH_TNCR_TXNCTR_Pos 0 +#define PERIPH_TNCR_TXNCTR_Msk (0xffffu << PERIPH_TNCR_TXNCTR_Pos) /**< \brief (PERIPH_TNCR) Transmit Counter Next */ +#define PERIPH_TNCR_TXNCTR(value) ((PERIPH_TNCR_TXNCTR_Msk & ((value) << PERIPH_TNCR_TXNCTR_Pos))) +/* -------- PERIPH_PTCR : (PDC Offset: 0x20) Transfer Control Register -------- */ +#define PERIPH_PTCR_RXTEN (0x1u << 0) /**< \brief (PERIPH_PTCR) Receiver Transfer Enable */ +#define PERIPH_PTCR_RXTDIS (0x1u << 1) /**< \brief (PERIPH_PTCR) Receiver Transfer Disable */ +#define PERIPH_PTCR_TXTEN (0x1u << 8) /**< \brief (PERIPH_PTCR) Transmitter Transfer Enable */ +#define PERIPH_PTCR_TXTDIS (0x1u << 9) /**< \brief (PERIPH_PTCR) Transmitter Transfer Disable */ +/* -------- PERIPH_PTSR : (PDC Offset: 0x24) Transfer Status Register -------- */ +#define PERIPH_PTSR_RXTEN (0x1u << 0) /**< \brief (PERIPH_PTSR) Receiver Transfer Enable */ +#define PERIPH_PTSR_TXTEN (0x1u << 8) /**< \brief (PERIPH_PTSR) Transmitter Transfer Enable */ + +/*@}*/ + + +#endif /* _SAM4S_PDC_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_pio.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_pio.h new file mode 100644 index 0000000..311ed12 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_pio.h
@@ -0,0 +1,1652 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_PIO_COMPONENT_ +#define _SAM4S_PIO_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Parallel Input/Output Controller */ +/* ============================================================================= */ +/** \addtogroup SAM4S_PIO Parallel Input/Output Controller */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Pio hardware registers */ +typedef struct { + WoReg PIO_PER; /**< \brief (Pio Offset: 0x0000) PIO Enable Register */ + WoReg PIO_PDR; /**< \brief (Pio Offset: 0x0004) PIO Disable Register */ + RoReg PIO_PSR; /**< \brief (Pio Offset: 0x0008) PIO Status Register */ + RoReg Reserved1[1]; + WoReg PIO_OER; /**< \brief (Pio Offset: 0x0010) Output Enable Register */ + WoReg PIO_ODR; /**< \brief (Pio Offset: 0x0014) Output Disable Register */ + RoReg PIO_OSR; /**< \brief (Pio Offset: 0x0018) Output Status Register */ + RoReg Reserved2[1]; + WoReg PIO_IFER; /**< \brief (Pio Offset: 0x0020) Glitch Input Filter Enable Register */ + WoReg PIO_IFDR; /**< \brief (Pio Offset: 0x0024) Glitch Input Filter Disable Register */ + RoReg PIO_IFSR; /**< \brief (Pio Offset: 0x0028) Glitch Input Filter Status Register */ + RoReg Reserved3[1]; + WoReg PIO_SODR; /**< \brief (Pio Offset: 0x0030) Set Output Data Register */ + WoReg PIO_CODR; /**< \brief (Pio Offset: 0x0034) Clear Output Data Register */ + RwReg PIO_ODSR; /**< \brief (Pio Offset: 0x0038) Output Data Status Register */ + RoReg PIO_PDSR; /**< \brief (Pio Offset: 0x003C) Pin Data Status Register */ + WoReg PIO_IER; /**< \brief (Pio Offset: 0x0040) Interrupt Enable Register */ + WoReg PIO_IDR; /**< \brief (Pio Offset: 0x0044) Interrupt Disable Register */ + RoReg PIO_IMR; /**< \brief (Pio Offset: 0x0048) Interrupt Mask Register */ + RoReg PIO_ISR; /**< \brief (Pio Offset: 0x004C) Interrupt Status Register */ + WoReg PIO_MDER; /**< \brief (Pio Offset: 0x0050) Multi-driver Enable Register */ + WoReg PIO_MDDR; /**< \brief (Pio Offset: 0x0054) Multi-driver Disable Register */ + RoReg PIO_MDSR; /**< \brief (Pio Offset: 0x0058) Multi-driver Status Register */ + RoReg Reserved4[1]; + WoReg PIO_PUDR; /**< \brief (Pio Offset: 0x0060) Pull-up Disable Register */ + WoReg PIO_PUER; /**< \brief (Pio Offset: 0x0064) Pull-up Enable Register */ + RoReg PIO_PUSR; /**< \brief (Pio Offset: 0x0068) Pad Pull-up Status Register */ + RoReg Reserved5[1]; + RwReg PIO_ABCDSR[2]; /**< \brief (Pio Offset: 0x0070) Peripheral Select Register */ + RoReg Reserved6[2]; + WoReg PIO_IFSCDR; /**< \brief (Pio Offset: 0x0080) Input Filter Slow Clock Disable Register */ + WoReg PIO_IFSCER; /**< \brief (Pio Offset: 0x0084) Input Filter Slow Clock Enable Register */ + RoReg PIO_IFSCSR; /**< \brief (Pio Offset: 0x0088) Input Filter Slow Clock Status Register */ + RwReg PIO_SCDR; /**< \brief (Pio Offset: 0x008C) Slow Clock Divider Debouncing Register */ + WoReg PIO_PPDDR; /**< \brief (Pio Offset: 0x0090) Pad Pull-down Disable Register */ + WoReg PIO_PPDER; /**< \brief (Pio Offset: 0x0094) Pad Pull-down Enable Register */ + RoReg PIO_PPDSR; /**< \brief (Pio Offset: 0x0098) Pad Pull-down Status Register */ + RoReg Reserved7[1]; + WoReg PIO_OWER; /**< \brief (Pio Offset: 0x00A0) Output Write Enable */ + WoReg PIO_OWDR; /**< \brief (Pio Offset: 0x00A4) Output Write Disable */ + RoReg PIO_OWSR; /**< \brief (Pio Offset: 0x00A8) Output Write Status Register */ + RoReg Reserved8[1]; + WoReg PIO_AIMER; /**< \brief (Pio Offset: 0x00B0) Additional Interrupt Modes Enable Register */ + WoReg PIO_AIMDR; /**< \brief (Pio Offset: 0x00B4) Additional Interrupt Modes Disables Register */ + RoReg PIO_AIMMR; /**< \brief (Pio Offset: 0x00B8) Additional Interrupt Modes Mask Register */ + RoReg Reserved9[1]; + WoReg PIO_ESR; /**< \brief (Pio Offset: 0x00C0) Edge Select Register */ + WoReg PIO_LSR; /**< \brief (Pio Offset: 0x00C4) Level Select Register */ + RoReg PIO_ELSR; /**< \brief (Pio Offset: 0x00C8) Edge/Level Status Register */ + RoReg Reserved10[1]; + WoReg PIO_FELLSR; /**< \brief (Pio Offset: 0x00D0) Falling Edge/Low Level Select Register */ + WoReg PIO_REHLSR; /**< \brief (Pio Offset: 0x00D4) Rising Edge/ High Level Select Register */ + RoReg PIO_FRLHSR; /**< \brief (Pio Offset: 0x00D8) Fall/Rise - Low/High Status Register */ + RoReg Reserved11[1]; + RoReg PIO_LOCKSR; /**< \brief (Pio Offset: 0x00E0) Lock Status */ + RwReg PIO_WPMR; /**< \brief (Pio Offset: 0x00E4) Write Protect Mode Register */ + RoReg PIO_WPSR; /**< \brief (Pio Offset: 0x00E8) Write Protect Status Register */ + RoReg Reserved12[5]; + RwReg PIO_SCHMITT; /**< \brief (Pio Offset: 0x0100) Schmitt Trigger Register */ + RoReg Reserved13[19]; + RwReg PIO_PCMR; /**< \brief (Pio Offset: 0x150) Parallel Capture Mode Register */ + WoReg PIO_PCIER; /**< \brief (Pio Offset: 0x154) Parallel Capture Interrupt Enable Register */ + WoReg PIO_PCIDR; /**< \brief (Pio Offset: 0x158) Parallel Capture Interrupt Disable Register */ + RoReg PIO_PCIMR; /**< \brief (Pio Offset: 0x15C) Parallel Capture Interrupt Mask Register */ + RoReg PIO_PCISR; /**< \brief (Pio Offset: 0x160) Parallel Capture Interrupt Status Register */ + RoReg PIO_PCRHR; /**< \brief (Pio Offset: 0x164) Parallel Capture Reception Holding Register */ + RwReg PIO_RPR; /**< \brief (Pio Offset: 0x168) Receive Pointer Register */ + RwReg PIO_RCR; /**< \brief (Pio Offset: 0x16C) Receive Counter Register */ + RoReg Reserved14[2]; + RwReg PIO_RNPR; /**< \brief (Pio Offset: 0x178) Receive Next Pointer Register */ + RwReg PIO_RNCR; /**< \brief (Pio Offset: 0x17C) Receive Next Counter Register */ + RoReg Reserved15[2]; + WoReg PIO_PTCR; /**< \brief (Pio Offset: 0x188) Transfer Control Register */ + RoReg PIO_PTSR; /**< \brief (Pio Offset: 0x18C) Transfer Status Register */ +} Pio; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- PIO_PER : (PIO Offset: 0x0000) PIO Enable Register -------- */ +#define PIO_PER_P0 (0x1u << 0) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P1 (0x1u << 1) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P2 (0x1u << 2) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P3 (0x1u << 3) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P4 (0x1u << 4) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P5 (0x1u << 5) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P6 (0x1u << 6) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P7 (0x1u << 7) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P8 (0x1u << 8) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P9 (0x1u << 9) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P10 (0x1u << 10) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P11 (0x1u << 11) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P12 (0x1u << 12) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P13 (0x1u << 13) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P14 (0x1u << 14) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P15 (0x1u << 15) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P16 (0x1u << 16) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P17 (0x1u << 17) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P18 (0x1u << 18) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P19 (0x1u << 19) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P20 (0x1u << 20) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P21 (0x1u << 21) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P22 (0x1u << 22) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P23 (0x1u << 23) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P24 (0x1u << 24) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P25 (0x1u << 25) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P26 (0x1u << 26) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P27 (0x1u << 27) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P28 (0x1u << 28) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P29 (0x1u << 29) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P30 (0x1u << 30) /**< \brief (PIO_PER) PIO Enable */ +#define PIO_PER_P31 (0x1u << 31) /**< \brief (PIO_PER) PIO Enable */ +/* -------- PIO_PDR : (PIO Offset: 0x0004) PIO Disable Register -------- */ +#define PIO_PDR_P0 (0x1u << 0) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P1 (0x1u << 1) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P2 (0x1u << 2) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P3 (0x1u << 3) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P4 (0x1u << 4) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P5 (0x1u << 5) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P6 (0x1u << 6) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P7 (0x1u << 7) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P8 (0x1u << 8) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P9 (0x1u << 9) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P10 (0x1u << 10) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P11 (0x1u << 11) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P12 (0x1u << 12) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P13 (0x1u << 13) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P14 (0x1u << 14) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P15 (0x1u << 15) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P16 (0x1u << 16) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P17 (0x1u << 17) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P18 (0x1u << 18) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P19 (0x1u << 19) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P20 (0x1u << 20) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P21 (0x1u << 21) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P22 (0x1u << 22) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P23 (0x1u << 23) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P24 (0x1u << 24) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P25 (0x1u << 25) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P26 (0x1u << 26) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P27 (0x1u << 27) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P28 (0x1u << 28) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P29 (0x1u << 29) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P30 (0x1u << 30) /**< \brief (PIO_PDR) PIO Disable */ +#define PIO_PDR_P31 (0x1u << 31) /**< \brief (PIO_PDR) PIO Disable */ +/* -------- PIO_PSR : (PIO Offset: 0x0008) PIO Status Register -------- */ +#define PIO_PSR_P0 (0x1u << 0) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P1 (0x1u << 1) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P2 (0x1u << 2) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P3 (0x1u << 3) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P4 (0x1u << 4) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P5 (0x1u << 5) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P6 (0x1u << 6) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P7 (0x1u << 7) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P8 (0x1u << 8) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P9 (0x1u << 9) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P10 (0x1u << 10) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P11 (0x1u << 11) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P12 (0x1u << 12) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P13 (0x1u << 13) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P14 (0x1u << 14) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P15 (0x1u << 15) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P16 (0x1u << 16) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P17 (0x1u << 17) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P18 (0x1u << 18) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P19 (0x1u << 19) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P20 (0x1u << 20) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P21 (0x1u << 21) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P22 (0x1u << 22) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P23 (0x1u << 23) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P24 (0x1u << 24) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P25 (0x1u << 25) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P26 (0x1u << 26) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P27 (0x1u << 27) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P28 (0x1u << 28) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P29 (0x1u << 29) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P30 (0x1u << 30) /**< \brief (PIO_PSR) PIO Status */ +#define PIO_PSR_P31 (0x1u << 31) /**< \brief (PIO_PSR) PIO Status */ +/* -------- PIO_OER : (PIO Offset: 0x0010) Output Enable Register -------- */ +#define PIO_OER_P0 (0x1u << 0) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P1 (0x1u << 1) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P2 (0x1u << 2) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P3 (0x1u << 3) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P4 (0x1u << 4) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P5 (0x1u << 5) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P6 (0x1u << 6) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P7 (0x1u << 7) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P8 (0x1u << 8) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P9 (0x1u << 9) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P10 (0x1u << 10) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P11 (0x1u << 11) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P12 (0x1u << 12) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P13 (0x1u << 13) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P14 (0x1u << 14) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P15 (0x1u << 15) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P16 (0x1u << 16) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P17 (0x1u << 17) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P18 (0x1u << 18) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P19 (0x1u << 19) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P20 (0x1u << 20) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P21 (0x1u << 21) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P22 (0x1u << 22) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P23 (0x1u << 23) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P24 (0x1u << 24) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P25 (0x1u << 25) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P26 (0x1u << 26) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P27 (0x1u << 27) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P28 (0x1u << 28) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P29 (0x1u << 29) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P30 (0x1u << 30) /**< \brief (PIO_OER) Output Enable */ +#define PIO_OER_P31 (0x1u << 31) /**< \brief (PIO_OER) Output Enable */ +/* -------- PIO_ODR : (PIO Offset: 0x0014) Output Disable Register -------- */ +#define PIO_ODR_P0 (0x1u << 0) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P1 (0x1u << 1) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P2 (0x1u << 2) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P3 (0x1u << 3) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P4 (0x1u << 4) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P5 (0x1u << 5) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P6 (0x1u << 6) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P7 (0x1u << 7) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P8 (0x1u << 8) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P9 (0x1u << 9) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P10 (0x1u << 10) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P11 (0x1u << 11) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P12 (0x1u << 12) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P13 (0x1u << 13) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P14 (0x1u << 14) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P15 (0x1u << 15) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P16 (0x1u << 16) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P17 (0x1u << 17) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P18 (0x1u << 18) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P19 (0x1u << 19) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P20 (0x1u << 20) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P21 (0x1u << 21) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P22 (0x1u << 22) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P23 (0x1u << 23) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P24 (0x1u << 24) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P25 (0x1u << 25) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P26 (0x1u << 26) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P27 (0x1u << 27) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P28 (0x1u << 28) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P29 (0x1u << 29) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P30 (0x1u << 30) /**< \brief (PIO_ODR) Output Disable */ +#define PIO_ODR_P31 (0x1u << 31) /**< \brief (PIO_ODR) Output Disable */ +/* -------- PIO_OSR : (PIO Offset: 0x0018) Output Status Register -------- */ +#define PIO_OSR_P0 (0x1u << 0) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P1 (0x1u << 1) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P2 (0x1u << 2) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P3 (0x1u << 3) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P4 (0x1u << 4) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P5 (0x1u << 5) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P6 (0x1u << 6) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P7 (0x1u << 7) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P8 (0x1u << 8) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P9 (0x1u << 9) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P10 (0x1u << 10) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P11 (0x1u << 11) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P12 (0x1u << 12) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P13 (0x1u << 13) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P14 (0x1u << 14) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P15 (0x1u << 15) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P16 (0x1u << 16) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P17 (0x1u << 17) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P18 (0x1u << 18) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P19 (0x1u << 19) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P20 (0x1u << 20) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P21 (0x1u << 21) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P22 (0x1u << 22) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P23 (0x1u << 23) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P24 (0x1u << 24) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P25 (0x1u << 25) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P26 (0x1u << 26) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P27 (0x1u << 27) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P28 (0x1u << 28) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P29 (0x1u << 29) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P30 (0x1u << 30) /**< \brief (PIO_OSR) Output Status */ +#define PIO_OSR_P31 (0x1u << 31) /**< \brief (PIO_OSR) Output Status */ +/* -------- PIO_IFER : (PIO Offset: 0x0020) Glitch Input Filter Enable Register -------- */ +#define PIO_IFER_P0 (0x1u << 0) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P1 (0x1u << 1) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P2 (0x1u << 2) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P3 (0x1u << 3) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P4 (0x1u << 4) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P5 (0x1u << 5) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P6 (0x1u << 6) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P7 (0x1u << 7) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P8 (0x1u << 8) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P9 (0x1u << 9) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P10 (0x1u << 10) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P11 (0x1u << 11) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P12 (0x1u << 12) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P13 (0x1u << 13) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P14 (0x1u << 14) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P15 (0x1u << 15) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P16 (0x1u << 16) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P17 (0x1u << 17) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P18 (0x1u << 18) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P19 (0x1u << 19) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P20 (0x1u << 20) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P21 (0x1u << 21) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P22 (0x1u << 22) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P23 (0x1u << 23) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P24 (0x1u << 24) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P25 (0x1u << 25) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P26 (0x1u << 26) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P27 (0x1u << 27) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P28 (0x1u << 28) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P29 (0x1u << 29) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P30 (0x1u << 30) /**< \brief (PIO_IFER) Input Filter Enable */ +#define PIO_IFER_P31 (0x1u << 31) /**< \brief (PIO_IFER) Input Filter Enable */ +/* -------- PIO_IFDR : (PIO Offset: 0x0024) Glitch Input Filter Disable Register -------- */ +#define PIO_IFDR_P0 (0x1u << 0) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P1 (0x1u << 1) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P2 (0x1u << 2) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P3 (0x1u << 3) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P4 (0x1u << 4) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P5 (0x1u << 5) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P6 (0x1u << 6) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P7 (0x1u << 7) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P8 (0x1u << 8) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P9 (0x1u << 9) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P10 (0x1u << 10) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P11 (0x1u << 11) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P12 (0x1u << 12) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P13 (0x1u << 13) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P14 (0x1u << 14) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P15 (0x1u << 15) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P16 (0x1u << 16) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P17 (0x1u << 17) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P18 (0x1u << 18) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P19 (0x1u << 19) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P20 (0x1u << 20) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P21 (0x1u << 21) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P22 (0x1u << 22) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P23 (0x1u << 23) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P24 (0x1u << 24) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P25 (0x1u << 25) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P26 (0x1u << 26) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P27 (0x1u << 27) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P28 (0x1u << 28) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P29 (0x1u << 29) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P30 (0x1u << 30) /**< \brief (PIO_IFDR) Input Filter Disable */ +#define PIO_IFDR_P31 (0x1u << 31) /**< \brief (PIO_IFDR) Input Filter Disable */ +/* -------- PIO_IFSR : (PIO Offset: 0x0028) Glitch Input Filter Status Register -------- */ +#define PIO_IFSR_P0 (0x1u << 0) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P1 (0x1u << 1) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P2 (0x1u << 2) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P3 (0x1u << 3) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P4 (0x1u << 4) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P5 (0x1u << 5) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P6 (0x1u << 6) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P7 (0x1u << 7) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P8 (0x1u << 8) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P9 (0x1u << 9) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P10 (0x1u << 10) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P11 (0x1u << 11) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P12 (0x1u << 12) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P13 (0x1u << 13) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P14 (0x1u << 14) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P15 (0x1u << 15) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P16 (0x1u << 16) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P17 (0x1u << 17) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P18 (0x1u << 18) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P19 (0x1u << 19) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P20 (0x1u << 20) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P21 (0x1u << 21) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P22 (0x1u << 22) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P23 (0x1u << 23) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P24 (0x1u << 24) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P25 (0x1u << 25) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P26 (0x1u << 26) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P27 (0x1u << 27) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P28 (0x1u << 28) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P29 (0x1u << 29) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P30 (0x1u << 30) /**< \brief (PIO_IFSR) Input Filer Status */ +#define PIO_IFSR_P31 (0x1u << 31) /**< \brief (PIO_IFSR) Input Filer Status */ +/* -------- PIO_SODR : (PIO Offset: 0x0030) Set Output Data Register -------- */ +#define PIO_SODR_P0 (0x1u << 0) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P1 (0x1u << 1) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P2 (0x1u << 2) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P3 (0x1u << 3) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P4 (0x1u << 4) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P5 (0x1u << 5) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P6 (0x1u << 6) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P7 (0x1u << 7) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P8 (0x1u << 8) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P9 (0x1u << 9) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P10 (0x1u << 10) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P11 (0x1u << 11) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P12 (0x1u << 12) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P13 (0x1u << 13) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P14 (0x1u << 14) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P15 (0x1u << 15) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P16 (0x1u << 16) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P17 (0x1u << 17) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P18 (0x1u << 18) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P19 (0x1u << 19) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P20 (0x1u << 20) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P21 (0x1u << 21) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P22 (0x1u << 22) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P23 (0x1u << 23) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P24 (0x1u << 24) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P25 (0x1u << 25) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P26 (0x1u << 26) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P27 (0x1u << 27) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P28 (0x1u << 28) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P29 (0x1u << 29) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P30 (0x1u << 30) /**< \brief (PIO_SODR) Set Output Data */ +#define PIO_SODR_P31 (0x1u << 31) /**< \brief (PIO_SODR) Set Output Data */ +/* -------- PIO_CODR : (PIO Offset: 0x0034) Clear Output Data Register -------- */ +#define PIO_CODR_P0 (0x1u << 0) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P1 (0x1u << 1) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P2 (0x1u << 2) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P3 (0x1u << 3) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P4 (0x1u << 4) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P5 (0x1u << 5) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P6 (0x1u << 6) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P7 (0x1u << 7) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P8 (0x1u << 8) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P9 (0x1u << 9) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P10 (0x1u << 10) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P11 (0x1u << 11) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P12 (0x1u << 12) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P13 (0x1u << 13) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P14 (0x1u << 14) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P15 (0x1u << 15) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P16 (0x1u << 16) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P17 (0x1u << 17) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P18 (0x1u << 18) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P19 (0x1u << 19) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P20 (0x1u << 20) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P21 (0x1u << 21) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P22 (0x1u << 22) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P23 (0x1u << 23) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P24 (0x1u << 24) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P25 (0x1u << 25) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P26 (0x1u << 26) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P27 (0x1u << 27) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P28 (0x1u << 28) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P29 (0x1u << 29) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P30 (0x1u << 30) /**< \brief (PIO_CODR) Clear Output Data */ +#define PIO_CODR_P31 (0x1u << 31) /**< \brief (PIO_CODR) Clear Output Data */ +/* -------- PIO_ODSR : (PIO Offset: 0x0038) Output Data Status Register -------- */ +#define PIO_ODSR_P0 (0x1u << 0) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P1 (0x1u << 1) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P2 (0x1u << 2) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P3 (0x1u << 3) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P4 (0x1u << 4) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P5 (0x1u << 5) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P6 (0x1u << 6) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P7 (0x1u << 7) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P8 (0x1u << 8) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P9 (0x1u << 9) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P10 (0x1u << 10) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P11 (0x1u << 11) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P12 (0x1u << 12) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P13 (0x1u << 13) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P14 (0x1u << 14) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P15 (0x1u << 15) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P16 (0x1u << 16) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P17 (0x1u << 17) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P18 (0x1u << 18) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P19 (0x1u << 19) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P20 (0x1u << 20) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P21 (0x1u << 21) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P22 (0x1u << 22) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P23 (0x1u << 23) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P24 (0x1u << 24) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P25 (0x1u << 25) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P26 (0x1u << 26) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P27 (0x1u << 27) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P28 (0x1u << 28) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P29 (0x1u << 29) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P30 (0x1u << 30) /**< \brief (PIO_ODSR) Output Data Status */ +#define PIO_ODSR_P31 (0x1u << 31) /**< \brief (PIO_ODSR) Output Data Status */ +/* -------- PIO_PDSR : (PIO Offset: 0x003C) Pin Data Status Register -------- */ +#define PIO_PDSR_P0 (0x1u << 0) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P1 (0x1u << 1) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P2 (0x1u << 2) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P3 (0x1u << 3) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P4 (0x1u << 4) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P5 (0x1u << 5) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P6 (0x1u << 6) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P7 (0x1u << 7) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P8 (0x1u << 8) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P9 (0x1u << 9) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P10 (0x1u << 10) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P11 (0x1u << 11) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P12 (0x1u << 12) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P13 (0x1u << 13) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P14 (0x1u << 14) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P15 (0x1u << 15) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P16 (0x1u << 16) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P17 (0x1u << 17) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P18 (0x1u << 18) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P19 (0x1u << 19) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P20 (0x1u << 20) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P21 (0x1u << 21) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P22 (0x1u << 22) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P23 (0x1u << 23) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P24 (0x1u << 24) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P25 (0x1u << 25) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P26 (0x1u << 26) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P27 (0x1u << 27) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P28 (0x1u << 28) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P29 (0x1u << 29) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P30 (0x1u << 30) /**< \brief (PIO_PDSR) Output Data Status */ +#define PIO_PDSR_P31 (0x1u << 31) /**< \brief (PIO_PDSR) Output Data Status */ +/* -------- PIO_IER : (PIO Offset: 0x0040) Interrupt Enable Register -------- */ +#define PIO_IER_P0 (0x1u << 0) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P1 (0x1u << 1) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P2 (0x1u << 2) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P3 (0x1u << 3) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P4 (0x1u << 4) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P5 (0x1u << 5) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P6 (0x1u << 6) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P7 (0x1u << 7) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P8 (0x1u << 8) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P9 (0x1u << 9) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P10 (0x1u << 10) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P11 (0x1u << 11) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P12 (0x1u << 12) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P13 (0x1u << 13) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P14 (0x1u << 14) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P15 (0x1u << 15) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P16 (0x1u << 16) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P17 (0x1u << 17) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P18 (0x1u << 18) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P19 (0x1u << 19) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P20 (0x1u << 20) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P21 (0x1u << 21) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P22 (0x1u << 22) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P23 (0x1u << 23) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P24 (0x1u << 24) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P25 (0x1u << 25) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P26 (0x1u << 26) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P27 (0x1u << 27) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P28 (0x1u << 28) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P29 (0x1u << 29) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P30 (0x1u << 30) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +#define PIO_IER_P31 (0x1u << 31) /**< \brief (PIO_IER) Input Change Interrupt Enable */ +/* -------- PIO_IDR : (PIO Offset: 0x0044) Interrupt Disable Register -------- */ +#define PIO_IDR_P0 (0x1u << 0) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P1 (0x1u << 1) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P2 (0x1u << 2) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P3 (0x1u << 3) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P4 (0x1u << 4) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P5 (0x1u << 5) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P6 (0x1u << 6) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P7 (0x1u << 7) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P8 (0x1u << 8) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P9 (0x1u << 9) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P10 (0x1u << 10) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P11 (0x1u << 11) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P12 (0x1u << 12) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P13 (0x1u << 13) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P14 (0x1u << 14) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P15 (0x1u << 15) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P16 (0x1u << 16) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P17 (0x1u << 17) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P18 (0x1u << 18) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P19 (0x1u << 19) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P20 (0x1u << 20) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P21 (0x1u << 21) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P22 (0x1u << 22) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P23 (0x1u << 23) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P24 (0x1u << 24) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P25 (0x1u << 25) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P26 (0x1u << 26) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P27 (0x1u << 27) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P28 (0x1u << 28) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P29 (0x1u << 29) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P30 (0x1u << 30) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +#define PIO_IDR_P31 (0x1u << 31) /**< \brief (PIO_IDR) Input Change Interrupt Disable */ +/* -------- PIO_IMR : (PIO Offset: 0x0048) Interrupt Mask Register -------- */ +#define PIO_IMR_P0 (0x1u << 0) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P1 (0x1u << 1) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P2 (0x1u << 2) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P3 (0x1u << 3) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P4 (0x1u << 4) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P5 (0x1u << 5) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P6 (0x1u << 6) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P7 (0x1u << 7) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P8 (0x1u << 8) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P9 (0x1u << 9) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P10 (0x1u << 10) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P11 (0x1u << 11) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P12 (0x1u << 12) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P13 (0x1u << 13) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P14 (0x1u << 14) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P15 (0x1u << 15) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P16 (0x1u << 16) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P17 (0x1u << 17) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P18 (0x1u << 18) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P19 (0x1u << 19) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P20 (0x1u << 20) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P21 (0x1u << 21) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P22 (0x1u << 22) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P23 (0x1u << 23) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P24 (0x1u << 24) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P25 (0x1u << 25) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P26 (0x1u << 26) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P27 (0x1u << 27) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P28 (0x1u << 28) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P29 (0x1u << 29) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P30 (0x1u << 30) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +#define PIO_IMR_P31 (0x1u << 31) /**< \brief (PIO_IMR) Input Change Interrupt Mask */ +/* -------- PIO_ISR : (PIO Offset: 0x004C) Interrupt Status Register -------- */ +#define PIO_ISR_P0 (0x1u << 0) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P1 (0x1u << 1) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P2 (0x1u << 2) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P3 (0x1u << 3) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P4 (0x1u << 4) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P5 (0x1u << 5) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P6 (0x1u << 6) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P7 (0x1u << 7) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P8 (0x1u << 8) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P9 (0x1u << 9) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P10 (0x1u << 10) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P11 (0x1u << 11) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P12 (0x1u << 12) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P13 (0x1u << 13) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P14 (0x1u << 14) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P15 (0x1u << 15) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P16 (0x1u << 16) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P17 (0x1u << 17) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P18 (0x1u << 18) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P19 (0x1u << 19) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P20 (0x1u << 20) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P21 (0x1u << 21) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P22 (0x1u << 22) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P23 (0x1u << 23) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P24 (0x1u << 24) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P25 (0x1u << 25) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P26 (0x1u << 26) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P27 (0x1u << 27) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P28 (0x1u << 28) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P29 (0x1u << 29) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P30 (0x1u << 30) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +#define PIO_ISR_P31 (0x1u << 31) /**< \brief (PIO_ISR) Input Change Interrupt Status */ +/* -------- PIO_MDER : (PIO Offset: 0x0050) Multi-driver Enable Register -------- */ +#define PIO_MDER_P0 (0x1u << 0) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P1 (0x1u << 1) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P2 (0x1u << 2) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P3 (0x1u << 3) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P4 (0x1u << 4) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P5 (0x1u << 5) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P6 (0x1u << 6) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P7 (0x1u << 7) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P8 (0x1u << 8) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P9 (0x1u << 9) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P10 (0x1u << 10) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P11 (0x1u << 11) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P12 (0x1u << 12) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P13 (0x1u << 13) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P14 (0x1u << 14) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P15 (0x1u << 15) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P16 (0x1u << 16) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P17 (0x1u << 17) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P18 (0x1u << 18) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P19 (0x1u << 19) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P20 (0x1u << 20) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P21 (0x1u << 21) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P22 (0x1u << 22) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P23 (0x1u << 23) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P24 (0x1u << 24) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P25 (0x1u << 25) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P26 (0x1u << 26) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P27 (0x1u << 27) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P28 (0x1u << 28) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P29 (0x1u << 29) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P30 (0x1u << 30) /**< \brief (PIO_MDER) Multi Drive Enable. */ +#define PIO_MDER_P31 (0x1u << 31) /**< \brief (PIO_MDER) Multi Drive Enable. */ +/* -------- PIO_MDDR : (PIO Offset: 0x0054) Multi-driver Disable Register -------- */ +#define PIO_MDDR_P0 (0x1u << 0) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P1 (0x1u << 1) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P2 (0x1u << 2) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P3 (0x1u << 3) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P4 (0x1u << 4) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P5 (0x1u << 5) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P6 (0x1u << 6) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P7 (0x1u << 7) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P8 (0x1u << 8) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P9 (0x1u << 9) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P10 (0x1u << 10) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P11 (0x1u << 11) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P12 (0x1u << 12) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P13 (0x1u << 13) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P14 (0x1u << 14) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P15 (0x1u << 15) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P16 (0x1u << 16) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P17 (0x1u << 17) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P18 (0x1u << 18) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P19 (0x1u << 19) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P20 (0x1u << 20) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P21 (0x1u << 21) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P22 (0x1u << 22) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P23 (0x1u << 23) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P24 (0x1u << 24) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P25 (0x1u << 25) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P26 (0x1u << 26) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P27 (0x1u << 27) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P28 (0x1u << 28) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P29 (0x1u << 29) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P30 (0x1u << 30) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +#define PIO_MDDR_P31 (0x1u << 31) /**< \brief (PIO_MDDR) Multi Drive Disable. */ +/* -------- PIO_MDSR : (PIO Offset: 0x0058) Multi-driver Status Register -------- */ +#define PIO_MDSR_P0 (0x1u << 0) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P1 (0x1u << 1) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P2 (0x1u << 2) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P3 (0x1u << 3) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P4 (0x1u << 4) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P5 (0x1u << 5) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P6 (0x1u << 6) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P7 (0x1u << 7) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P8 (0x1u << 8) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P9 (0x1u << 9) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P10 (0x1u << 10) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P11 (0x1u << 11) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P12 (0x1u << 12) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P13 (0x1u << 13) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P14 (0x1u << 14) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P15 (0x1u << 15) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P16 (0x1u << 16) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P17 (0x1u << 17) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P18 (0x1u << 18) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P19 (0x1u << 19) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P20 (0x1u << 20) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P21 (0x1u << 21) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P22 (0x1u << 22) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P23 (0x1u << 23) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P24 (0x1u << 24) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P25 (0x1u << 25) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P26 (0x1u << 26) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P27 (0x1u << 27) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P28 (0x1u << 28) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P29 (0x1u << 29) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P30 (0x1u << 30) /**< \brief (PIO_MDSR) Multi Drive Status. */ +#define PIO_MDSR_P31 (0x1u << 31) /**< \brief (PIO_MDSR) Multi Drive Status. */ +/* -------- PIO_PUDR : (PIO Offset: 0x0060) Pull-up Disable Register -------- */ +#define PIO_PUDR_P0 (0x1u << 0) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P1 (0x1u << 1) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P2 (0x1u << 2) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P3 (0x1u << 3) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P4 (0x1u << 4) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P5 (0x1u << 5) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P6 (0x1u << 6) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P7 (0x1u << 7) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P8 (0x1u << 8) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P9 (0x1u << 9) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P10 (0x1u << 10) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P11 (0x1u << 11) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P12 (0x1u << 12) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P13 (0x1u << 13) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P14 (0x1u << 14) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P15 (0x1u << 15) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P16 (0x1u << 16) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P17 (0x1u << 17) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P18 (0x1u << 18) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P19 (0x1u << 19) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P20 (0x1u << 20) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P21 (0x1u << 21) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P22 (0x1u << 22) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P23 (0x1u << 23) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P24 (0x1u << 24) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P25 (0x1u << 25) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P26 (0x1u << 26) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P27 (0x1u << 27) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P28 (0x1u << 28) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P29 (0x1u << 29) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P30 (0x1u << 30) /**< \brief (PIO_PUDR) Pull Up Disable. */ +#define PIO_PUDR_P31 (0x1u << 31) /**< \brief (PIO_PUDR) Pull Up Disable. */ +/* -------- PIO_PUER : (PIO Offset: 0x0064) Pull-up Enable Register -------- */ +#define PIO_PUER_P0 (0x1u << 0) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P1 (0x1u << 1) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P2 (0x1u << 2) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P3 (0x1u << 3) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P4 (0x1u << 4) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P5 (0x1u << 5) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P6 (0x1u << 6) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P7 (0x1u << 7) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P8 (0x1u << 8) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P9 (0x1u << 9) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P10 (0x1u << 10) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P11 (0x1u << 11) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P12 (0x1u << 12) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P13 (0x1u << 13) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P14 (0x1u << 14) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P15 (0x1u << 15) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P16 (0x1u << 16) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P17 (0x1u << 17) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P18 (0x1u << 18) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P19 (0x1u << 19) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P20 (0x1u << 20) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P21 (0x1u << 21) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P22 (0x1u << 22) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P23 (0x1u << 23) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P24 (0x1u << 24) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P25 (0x1u << 25) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P26 (0x1u << 26) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P27 (0x1u << 27) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P28 (0x1u << 28) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P29 (0x1u << 29) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P30 (0x1u << 30) /**< \brief (PIO_PUER) Pull Up Enable. */ +#define PIO_PUER_P31 (0x1u << 31) /**< \brief (PIO_PUER) Pull Up Enable. */ +/* -------- PIO_PUSR : (PIO Offset: 0x0068) Pad Pull-up Status Register -------- */ +#define PIO_PUSR_P0 (0x1u << 0) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P1 (0x1u << 1) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P2 (0x1u << 2) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P3 (0x1u << 3) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P4 (0x1u << 4) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P5 (0x1u << 5) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P6 (0x1u << 6) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P7 (0x1u << 7) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P8 (0x1u << 8) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P9 (0x1u << 9) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P10 (0x1u << 10) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P11 (0x1u << 11) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P12 (0x1u << 12) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P13 (0x1u << 13) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P14 (0x1u << 14) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P15 (0x1u << 15) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P16 (0x1u << 16) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P17 (0x1u << 17) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P18 (0x1u << 18) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P19 (0x1u << 19) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P20 (0x1u << 20) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P21 (0x1u << 21) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P22 (0x1u << 22) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P23 (0x1u << 23) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P24 (0x1u << 24) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P25 (0x1u << 25) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P26 (0x1u << 26) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P27 (0x1u << 27) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P28 (0x1u << 28) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P29 (0x1u << 29) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P30 (0x1u << 30) /**< \brief (PIO_PUSR) Pull Up Status. */ +#define PIO_PUSR_P31 (0x1u << 31) /**< \brief (PIO_PUSR) Pull Up Status. */ +/* -------- PIO_ABCDSR[2] : (PIO Offset: 0x0070) Peripheral Select Register -------- */ +#define PIO_ABCDSR_P0 (0x1u << 0) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P1 (0x1u << 1) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P2 (0x1u << 2) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P3 (0x1u << 3) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P4 (0x1u << 4) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P5 (0x1u << 5) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P6 (0x1u << 6) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P7 (0x1u << 7) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P8 (0x1u << 8) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P9 (0x1u << 9) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P10 (0x1u << 10) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P11 (0x1u << 11) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P12 (0x1u << 12) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P13 (0x1u << 13) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P14 (0x1u << 14) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P15 (0x1u << 15) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P16 (0x1u << 16) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P17 (0x1u << 17) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P18 (0x1u << 18) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P19 (0x1u << 19) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P20 (0x1u << 20) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P21 (0x1u << 21) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P22 (0x1u << 22) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P23 (0x1u << 23) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P24 (0x1u << 24) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P25 (0x1u << 25) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P26 (0x1u << 26) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P27 (0x1u << 27) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P28 (0x1u << 28) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P29 (0x1u << 29) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P30 (0x1u << 30) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +#define PIO_ABCDSR_P31 (0x1u << 31) /**< \brief (PIO_ABCDSR[2]) Peripheral Select. */ +/* -------- PIO_IFSCDR : (PIO Offset: 0x0080) Input Filter Slow Clock Disable Register -------- */ +#define PIO_IFSCDR_P0 (0x1u << 0) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P1 (0x1u << 1) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P2 (0x1u << 2) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P3 (0x1u << 3) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P4 (0x1u << 4) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P5 (0x1u << 5) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P6 (0x1u << 6) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P7 (0x1u << 7) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P8 (0x1u << 8) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P9 (0x1u << 9) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P10 (0x1u << 10) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P11 (0x1u << 11) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P12 (0x1u << 12) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P13 (0x1u << 13) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P14 (0x1u << 14) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P15 (0x1u << 15) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P16 (0x1u << 16) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P17 (0x1u << 17) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P18 (0x1u << 18) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P19 (0x1u << 19) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P20 (0x1u << 20) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P21 (0x1u << 21) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P22 (0x1u << 22) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P23 (0x1u << 23) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P24 (0x1u << 24) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P25 (0x1u << 25) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P26 (0x1u << 26) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P27 (0x1u << 27) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P28 (0x1u << 28) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P29 (0x1u << 29) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P30 (0x1u << 30) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +#define PIO_IFSCDR_P31 (0x1u << 31) /**< \brief (PIO_IFSCDR) PIO Clock Glitch Filtering Select. */ +/* -------- PIO_IFSCER : (PIO Offset: 0x0084) Input Filter Slow Clock Enable Register -------- */ +#define PIO_IFSCER_P0 (0x1u << 0) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P1 (0x1u << 1) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P2 (0x1u << 2) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P3 (0x1u << 3) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P4 (0x1u << 4) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P5 (0x1u << 5) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P6 (0x1u << 6) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P7 (0x1u << 7) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P8 (0x1u << 8) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P9 (0x1u << 9) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P10 (0x1u << 10) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P11 (0x1u << 11) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P12 (0x1u << 12) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P13 (0x1u << 13) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P14 (0x1u << 14) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P15 (0x1u << 15) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P16 (0x1u << 16) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P17 (0x1u << 17) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P18 (0x1u << 18) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P19 (0x1u << 19) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P20 (0x1u << 20) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P21 (0x1u << 21) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P22 (0x1u << 22) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P23 (0x1u << 23) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P24 (0x1u << 24) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P25 (0x1u << 25) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P26 (0x1u << 26) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P27 (0x1u << 27) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P28 (0x1u << 28) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P29 (0x1u << 29) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P30 (0x1u << 30) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +#define PIO_IFSCER_P31 (0x1u << 31) /**< \brief (PIO_IFSCER) Debouncing Filtering Select. */ +/* -------- PIO_IFSCSR : (PIO Offset: 0x0088) Input Filter Slow Clock Status Register -------- */ +#define PIO_IFSCSR_P0 (0x1u << 0) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P1 (0x1u << 1) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P2 (0x1u << 2) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P3 (0x1u << 3) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P4 (0x1u << 4) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P5 (0x1u << 5) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P6 (0x1u << 6) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P7 (0x1u << 7) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P8 (0x1u << 8) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P9 (0x1u << 9) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P10 (0x1u << 10) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P11 (0x1u << 11) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P12 (0x1u << 12) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P13 (0x1u << 13) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P14 (0x1u << 14) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P15 (0x1u << 15) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P16 (0x1u << 16) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P17 (0x1u << 17) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P18 (0x1u << 18) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P19 (0x1u << 19) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P20 (0x1u << 20) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P21 (0x1u << 21) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P22 (0x1u << 22) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P23 (0x1u << 23) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P24 (0x1u << 24) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P25 (0x1u << 25) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P26 (0x1u << 26) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P27 (0x1u << 27) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P28 (0x1u << 28) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P29 (0x1u << 29) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P30 (0x1u << 30) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +#define PIO_IFSCSR_P31 (0x1u << 31) /**< \brief (PIO_IFSCSR) Glitch or Debouncing Filter Selection Status */ +/* -------- PIO_SCDR : (PIO Offset: 0x008C) Slow Clock Divider Debouncing Register -------- */ +#define PIO_SCDR_DIV_Pos 0 +#define PIO_SCDR_DIV_Msk (0x3fffu << PIO_SCDR_DIV_Pos) /**< \brief (PIO_SCDR) */ +#define PIO_SCDR_DIV(value) ((PIO_SCDR_DIV_Msk & ((value) << PIO_SCDR_DIV_Pos))) +/* -------- PIO_PPDDR : (PIO Offset: 0x0090) Pad Pull-down Disable Register -------- */ +#define PIO_PPDDR_P0 (0x1u << 0) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P1 (0x1u << 1) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P2 (0x1u << 2) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P3 (0x1u << 3) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P4 (0x1u << 4) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P5 (0x1u << 5) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P6 (0x1u << 6) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P7 (0x1u << 7) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P8 (0x1u << 8) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P9 (0x1u << 9) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P10 (0x1u << 10) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P11 (0x1u << 11) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P12 (0x1u << 12) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P13 (0x1u << 13) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P14 (0x1u << 14) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P15 (0x1u << 15) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P16 (0x1u << 16) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P17 (0x1u << 17) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P18 (0x1u << 18) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P19 (0x1u << 19) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P20 (0x1u << 20) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P21 (0x1u << 21) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P22 (0x1u << 22) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P23 (0x1u << 23) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P24 (0x1u << 24) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P25 (0x1u << 25) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P26 (0x1u << 26) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P27 (0x1u << 27) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P28 (0x1u << 28) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P29 (0x1u << 29) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P30 (0x1u << 30) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +#define PIO_PPDDR_P31 (0x1u << 31) /**< \brief (PIO_PPDDR) Pull Down Disable. */ +/* -------- PIO_PPDER : (PIO Offset: 0x0094) Pad Pull-down Enable Register -------- */ +#define PIO_PPDER_P0 (0x1u << 0) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P1 (0x1u << 1) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P2 (0x1u << 2) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P3 (0x1u << 3) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P4 (0x1u << 4) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P5 (0x1u << 5) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P6 (0x1u << 6) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P7 (0x1u << 7) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P8 (0x1u << 8) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P9 (0x1u << 9) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P10 (0x1u << 10) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P11 (0x1u << 11) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P12 (0x1u << 12) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P13 (0x1u << 13) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P14 (0x1u << 14) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P15 (0x1u << 15) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P16 (0x1u << 16) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P17 (0x1u << 17) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P18 (0x1u << 18) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P19 (0x1u << 19) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P20 (0x1u << 20) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P21 (0x1u << 21) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P22 (0x1u << 22) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P23 (0x1u << 23) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P24 (0x1u << 24) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P25 (0x1u << 25) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P26 (0x1u << 26) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P27 (0x1u << 27) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P28 (0x1u << 28) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P29 (0x1u << 29) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P30 (0x1u << 30) /**< \brief (PIO_PPDER) Pull Down Enable. */ +#define PIO_PPDER_P31 (0x1u << 31) /**< \brief (PIO_PPDER) Pull Down Enable. */ +/* -------- PIO_PPDSR : (PIO Offset: 0x0098) Pad Pull-down Status Register -------- */ +#define PIO_PPDSR_P0 (0x1u << 0) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P1 (0x1u << 1) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P2 (0x1u << 2) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P3 (0x1u << 3) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P4 (0x1u << 4) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P5 (0x1u << 5) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P6 (0x1u << 6) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P7 (0x1u << 7) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P8 (0x1u << 8) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P9 (0x1u << 9) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P10 (0x1u << 10) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P11 (0x1u << 11) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P12 (0x1u << 12) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P13 (0x1u << 13) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P14 (0x1u << 14) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P15 (0x1u << 15) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P16 (0x1u << 16) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P17 (0x1u << 17) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P18 (0x1u << 18) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P19 (0x1u << 19) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P20 (0x1u << 20) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P21 (0x1u << 21) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P22 (0x1u << 22) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P23 (0x1u << 23) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P24 (0x1u << 24) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P25 (0x1u << 25) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P26 (0x1u << 26) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P27 (0x1u << 27) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P28 (0x1u << 28) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P29 (0x1u << 29) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P30 (0x1u << 30) /**< \brief (PIO_PPDSR) Pull Down Status. */ +#define PIO_PPDSR_P31 (0x1u << 31) /**< \brief (PIO_PPDSR) Pull Down Status. */ +/* -------- PIO_OWER : (PIO Offset: 0x00A0) Output Write Enable -------- */ +#define PIO_OWER_P0 (0x1u << 0) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P1 (0x1u << 1) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P2 (0x1u << 2) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P3 (0x1u << 3) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P4 (0x1u << 4) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P5 (0x1u << 5) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P6 (0x1u << 6) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P7 (0x1u << 7) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P8 (0x1u << 8) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P9 (0x1u << 9) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P10 (0x1u << 10) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P11 (0x1u << 11) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P12 (0x1u << 12) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P13 (0x1u << 13) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P14 (0x1u << 14) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P15 (0x1u << 15) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P16 (0x1u << 16) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P17 (0x1u << 17) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P18 (0x1u << 18) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P19 (0x1u << 19) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P20 (0x1u << 20) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P21 (0x1u << 21) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P22 (0x1u << 22) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P23 (0x1u << 23) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P24 (0x1u << 24) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P25 (0x1u << 25) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P26 (0x1u << 26) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P27 (0x1u << 27) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P28 (0x1u << 28) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P29 (0x1u << 29) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P30 (0x1u << 30) /**< \brief (PIO_OWER) Output Write Enable. */ +#define PIO_OWER_P31 (0x1u << 31) /**< \brief (PIO_OWER) Output Write Enable. */ +/* -------- PIO_OWDR : (PIO Offset: 0x00A4) Output Write Disable -------- */ +#define PIO_OWDR_P0 (0x1u << 0) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P1 (0x1u << 1) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P2 (0x1u << 2) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P3 (0x1u << 3) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P4 (0x1u << 4) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P5 (0x1u << 5) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P6 (0x1u << 6) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P7 (0x1u << 7) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P8 (0x1u << 8) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P9 (0x1u << 9) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P10 (0x1u << 10) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P11 (0x1u << 11) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P12 (0x1u << 12) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P13 (0x1u << 13) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P14 (0x1u << 14) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P15 (0x1u << 15) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P16 (0x1u << 16) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P17 (0x1u << 17) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P18 (0x1u << 18) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P19 (0x1u << 19) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P20 (0x1u << 20) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P21 (0x1u << 21) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P22 (0x1u << 22) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P23 (0x1u << 23) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P24 (0x1u << 24) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P25 (0x1u << 25) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P26 (0x1u << 26) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P27 (0x1u << 27) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P28 (0x1u << 28) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P29 (0x1u << 29) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P30 (0x1u << 30) /**< \brief (PIO_OWDR) Output Write Disable. */ +#define PIO_OWDR_P31 (0x1u << 31) /**< \brief (PIO_OWDR) Output Write Disable. */ +/* -------- PIO_OWSR : (PIO Offset: 0x00A8) Output Write Status Register -------- */ +#define PIO_OWSR_P0 (0x1u << 0) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P1 (0x1u << 1) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P2 (0x1u << 2) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P3 (0x1u << 3) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P4 (0x1u << 4) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P5 (0x1u << 5) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P6 (0x1u << 6) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P7 (0x1u << 7) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P8 (0x1u << 8) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P9 (0x1u << 9) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P10 (0x1u << 10) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P11 (0x1u << 11) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P12 (0x1u << 12) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P13 (0x1u << 13) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P14 (0x1u << 14) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P15 (0x1u << 15) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P16 (0x1u << 16) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P17 (0x1u << 17) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P18 (0x1u << 18) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P19 (0x1u << 19) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P20 (0x1u << 20) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P21 (0x1u << 21) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P22 (0x1u << 22) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P23 (0x1u << 23) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P24 (0x1u << 24) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P25 (0x1u << 25) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P26 (0x1u << 26) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P27 (0x1u << 27) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P28 (0x1u << 28) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P29 (0x1u << 29) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P30 (0x1u << 30) /**< \brief (PIO_OWSR) Output Write Status. */ +#define PIO_OWSR_P31 (0x1u << 31) /**< \brief (PIO_OWSR) Output Write Status. */ +/* -------- PIO_AIMER : (PIO Offset: 0x00B0) Additional Interrupt Modes Enable Register -------- */ +#define PIO_AIMER_P0 (0x1u << 0) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P1 (0x1u << 1) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P2 (0x1u << 2) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P3 (0x1u << 3) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P4 (0x1u << 4) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P5 (0x1u << 5) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P6 (0x1u << 6) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P7 (0x1u << 7) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P8 (0x1u << 8) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P9 (0x1u << 9) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P10 (0x1u << 10) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P11 (0x1u << 11) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P12 (0x1u << 12) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P13 (0x1u << 13) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P14 (0x1u << 14) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P15 (0x1u << 15) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P16 (0x1u << 16) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P17 (0x1u << 17) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P18 (0x1u << 18) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P19 (0x1u << 19) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P20 (0x1u << 20) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P21 (0x1u << 21) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P22 (0x1u << 22) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P23 (0x1u << 23) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P24 (0x1u << 24) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P25 (0x1u << 25) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P26 (0x1u << 26) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P27 (0x1u << 27) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P28 (0x1u << 28) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P29 (0x1u << 29) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P30 (0x1u << 30) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +#define PIO_AIMER_P31 (0x1u << 31) /**< \brief (PIO_AIMER) Additional Interrupt Modes Enable. */ +/* -------- PIO_AIMDR : (PIO Offset: 0x00B4) Additional Interrupt Modes Disables Register -------- */ +#define PIO_AIMDR_P0 (0x1u << 0) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P1 (0x1u << 1) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P2 (0x1u << 2) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P3 (0x1u << 3) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P4 (0x1u << 4) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P5 (0x1u << 5) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P6 (0x1u << 6) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P7 (0x1u << 7) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P8 (0x1u << 8) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P9 (0x1u << 9) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P10 (0x1u << 10) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P11 (0x1u << 11) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P12 (0x1u << 12) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P13 (0x1u << 13) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P14 (0x1u << 14) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P15 (0x1u << 15) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P16 (0x1u << 16) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P17 (0x1u << 17) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P18 (0x1u << 18) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P19 (0x1u << 19) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P20 (0x1u << 20) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P21 (0x1u << 21) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P22 (0x1u << 22) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P23 (0x1u << 23) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P24 (0x1u << 24) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P25 (0x1u << 25) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P26 (0x1u << 26) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P27 (0x1u << 27) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P28 (0x1u << 28) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P29 (0x1u << 29) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P30 (0x1u << 30) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +#define PIO_AIMDR_P31 (0x1u << 31) /**< \brief (PIO_AIMDR) Additional Interrupt Modes Disable. */ +/* -------- PIO_AIMMR : (PIO Offset: 0x00B8) Additional Interrupt Modes Mask Register -------- */ +#define PIO_AIMMR_P0 (0x1u << 0) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P1 (0x1u << 1) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P2 (0x1u << 2) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P3 (0x1u << 3) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P4 (0x1u << 4) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P5 (0x1u << 5) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P6 (0x1u << 6) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P7 (0x1u << 7) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P8 (0x1u << 8) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P9 (0x1u << 9) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P10 (0x1u << 10) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P11 (0x1u << 11) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P12 (0x1u << 12) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P13 (0x1u << 13) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P14 (0x1u << 14) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P15 (0x1u << 15) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P16 (0x1u << 16) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P17 (0x1u << 17) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P18 (0x1u << 18) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P19 (0x1u << 19) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P20 (0x1u << 20) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P21 (0x1u << 21) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P22 (0x1u << 22) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P23 (0x1u << 23) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P24 (0x1u << 24) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P25 (0x1u << 25) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P26 (0x1u << 26) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P27 (0x1u << 27) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P28 (0x1u << 28) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P29 (0x1u << 29) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P30 (0x1u << 30) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +#define PIO_AIMMR_P31 (0x1u << 31) /**< \brief (PIO_AIMMR) Peripheral CD Status. */ +/* -------- PIO_ESR : (PIO Offset: 0x00C0) Edge Select Register -------- */ +#define PIO_ESR_P0 (0x1u << 0) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P1 (0x1u << 1) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P2 (0x1u << 2) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P3 (0x1u << 3) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P4 (0x1u << 4) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P5 (0x1u << 5) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P6 (0x1u << 6) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P7 (0x1u << 7) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P8 (0x1u << 8) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P9 (0x1u << 9) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P10 (0x1u << 10) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P11 (0x1u << 11) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P12 (0x1u << 12) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P13 (0x1u << 13) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P14 (0x1u << 14) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P15 (0x1u << 15) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P16 (0x1u << 16) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P17 (0x1u << 17) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P18 (0x1u << 18) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P19 (0x1u << 19) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P20 (0x1u << 20) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P21 (0x1u << 21) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P22 (0x1u << 22) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P23 (0x1u << 23) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P24 (0x1u << 24) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P25 (0x1u << 25) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P26 (0x1u << 26) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P27 (0x1u << 27) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P28 (0x1u << 28) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P29 (0x1u << 29) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P30 (0x1u << 30) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +#define PIO_ESR_P31 (0x1u << 31) /**< \brief (PIO_ESR) Edge Interrupt Selection. */ +/* -------- PIO_LSR : (PIO Offset: 0x00C4) Level Select Register -------- */ +#define PIO_LSR_P0 (0x1u << 0) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P1 (0x1u << 1) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P2 (0x1u << 2) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P3 (0x1u << 3) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P4 (0x1u << 4) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P5 (0x1u << 5) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P6 (0x1u << 6) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P7 (0x1u << 7) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P8 (0x1u << 8) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P9 (0x1u << 9) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P10 (0x1u << 10) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P11 (0x1u << 11) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P12 (0x1u << 12) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P13 (0x1u << 13) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P14 (0x1u << 14) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P15 (0x1u << 15) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P16 (0x1u << 16) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P17 (0x1u << 17) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P18 (0x1u << 18) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P19 (0x1u << 19) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P20 (0x1u << 20) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P21 (0x1u << 21) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P22 (0x1u << 22) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P23 (0x1u << 23) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P24 (0x1u << 24) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P25 (0x1u << 25) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P26 (0x1u << 26) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P27 (0x1u << 27) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P28 (0x1u << 28) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P29 (0x1u << 29) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P30 (0x1u << 30) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +#define PIO_LSR_P31 (0x1u << 31) /**< \brief (PIO_LSR) Level Interrupt Selection. */ +/* -------- PIO_ELSR : (PIO Offset: 0x00C8) Edge/Level Status Register -------- */ +#define PIO_ELSR_P0 (0x1u << 0) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P1 (0x1u << 1) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P2 (0x1u << 2) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P3 (0x1u << 3) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P4 (0x1u << 4) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P5 (0x1u << 5) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P6 (0x1u << 6) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P7 (0x1u << 7) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P8 (0x1u << 8) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P9 (0x1u << 9) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P10 (0x1u << 10) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P11 (0x1u << 11) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P12 (0x1u << 12) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P13 (0x1u << 13) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P14 (0x1u << 14) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P15 (0x1u << 15) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P16 (0x1u << 16) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P17 (0x1u << 17) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P18 (0x1u << 18) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P19 (0x1u << 19) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P20 (0x1u << 20) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P21 (0x1u << 21) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P22 (0x1u << 22) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P23 (0x1u << 23) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P24 (0x1u << 24) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P25 (0x1u << 25) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P26 (0x1u << 26) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P27 (0x1u << 27) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P28 (0x1u << 28) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P29 (0x1u << 29) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P30 (0x1u << 30) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +#define PIO_ELSR_P31 (0x1u << 31) /**< \brief (PIO_ELSR) Edge/Level Interrupt source selection. */ +/* -------- PIO_FELLSR : (PIO Offset: 0x00D0) Falling Edge/Low Level Select Register -------- */ +#define PIO_FELLSR_P0 (0x1u << 0) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P1 (0x1u << 1) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P2 (0x1u << 2) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P3 (0x1u << 3) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P4 (0x1u << 4) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P5 (0x1u << 5) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P6 (0x1u << 6) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P7 (0x1u << 7) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P8 (0x1u << 8) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P9 (0x1u << 9) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P10 (0x1u << 10) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P11 (0x1u << 11) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P12 (0x1u << 12) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P13 (0x1u << 13) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P14 (0x1u << 14) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P15 (0x1u << 15) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P16 (0x1u << 16) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P17 (0x1u << 17) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P18 (0x1u << 18) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P19 (0x1u << 19) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P20 (0x1u << 20) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P21 (0x1u << 21) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P22 (0x1u << 22) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P23 (0x1u << 23) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P24 (0x1u << 24) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P25 (0x1u << 25) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P26 (0x1u << 26) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P27 (0x1u << 27) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P28 (0x1u << 28) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P29 (0x1u << 29) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P30 (0x1u << 30) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +#define PIO_FELLSR_P31 (0x1u << 31) /**< \brief (PIO_FELLSR) Falling Edge/Low Level Interrupt Selection. */ +/* -------- PIO_REHLSR : (PIO Offset: 0x00D4) Rising Edge/ High Level Select Register -------- */ +#define PIO_REHLSR_P0 (0x1u << 0) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P1 (0x1u << 1) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P2 (0x1u << 2) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P3 (0x1u << 3) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P4 (0x1u << 4) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P5 (0x1u << 5) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P6 (0x1u << 6) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P7 (0x1u << 7) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P8 (0x1u << 8) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P9 (0x1u << 9) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P10 (0x1u << 10) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P11 (0x1u << 11) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P12 (0x1u << 12) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P13 (0x1u << 13) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P14 (0x1u << 14) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P15 (0x1u << 15) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P16 (0x1u << 16) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P17 (0x1u << 17) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P18 (0x1u << 18) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P19 (0x1u << 19) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P20 (0x1u << 20) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P21 (0x1u << 21) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P22 (0x1u << 22) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P23 (0x1u << 23) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P24 (0x1u << 24) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P25 (0x1u << 25) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P26 (0x1u << 26) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P27 (0x1u << 27) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P28 (0x1u << 28) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P29 (0x1u << 29) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P30 (0x1u << 30) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +#define PIO_REHLSR_P31 (0x1u << 31) /**< \brief (PIO_REHLSR) Rising Edge /High Level Interrupt Selection. */ +/* -------- PIO_FRLHSR : (PIO Offset: 0x00D8) Fall/Rise - Low/High Status Register -------- */ +#define PIO_FRLHSR_P0 (0x1u << 0) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P1 (0x1u << 1) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P2 (0x1u << 2) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P3 (0x1u << 3) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P4 (0x1u << 4) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P5 (0x1u << 5) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P6 (0x1u << 6) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P7 (0x1u << 7) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P8 (0x1u << 8) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P9 (0x1u << 9) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P10 (0x1u << 10) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P11 (0x1u << 11) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P12 (0x1u << 12) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P13 (0x1u << 13) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P14 (0x1u << 14) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P15 (0x1u << 15) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P16 (0x1u << 16) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P17 (0x1u << 17) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P18 (0x1u << 18) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P19 (0x1u << 19) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P20 (0x1u << 20) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P21 (0x1u << 21) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P22 (0x1u << 22) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P23 (0x1u << 23) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P24 (0x1u << 24) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P25 (0x1u << 25) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P26 (0x1u << 26) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P27 (0x1u << 27) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P28 (0x1u << 28) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P29 (0x1u << 29) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P30 (0x1u << 30) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +#define PIO_FRLHSR_P31 (0x1u << 31) /**< \brief (PIO_FRLHSR) Edge /Level Interrupt Source Selection. */ +/* -------- PIO_LOCKSR : (PIO Offset: 0x00E0) Lock Status -------- */ +#define PIO_LOCKSR_P0 (0x1u << 0) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P1 (0x1u << 1) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P2 (0x1u << 2) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P3 (0x1u << 3) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P4 (0x1u << 4) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P5 (0x1u << 5) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P6 (0x1u << 6) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P7 (0x1u << 7) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P8 (0x1u << 8) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P9 (0x1u << 9) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P10 (0x1u << 10) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P11 (0x1u << 11) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P12 (0x1u << 12) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P13 (0x1u << 13) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P14 (0x1u << 14) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P15 (0x1u << 15) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P16 (0x1u << 16) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P17 (0x1u << 17) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P18 (0x1u << 18) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P19 (0x1u << 19) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P20 (0x1u << 20) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P21 (0x1u << 21) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P22 (0x1u << 22) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P23 (0x1u << 23) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P24 (0x1u << 24) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P25 (0x1u << 25) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P26 (0x1u << 26) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P27 (0x1u << 27) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P28 (0x1u << 28) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P29 (0x1u << 29) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P30 (0x1u << 30) /**< \brief (PIO_LOCKSR) Lock Status. */ +#define PIO_LOCKSR_P31 (0x1u << 31) /**< \brief (PIO_LOCKSR) Lock Status. */ +/* -------- PIO_WPMR : (PIO Offset: 0x00E4) Write Protect Mode Register -------- */ +#define PIO_WPMR_WPEN (0x1u << 0) /**< \brief (PIO_WPMR) Write Protect Enable */ +#define PIO_WPMR_WPKEY_Pos 8 +#define PIO_WPMR_WPKEY_Msk (0xffffffu << PIO_WPMR_WPKEY_Pos) /**< \brief (PIO_WPMR) Write Protect KEY */ +#define PIO_WPMR_WPKEY(value) ((PIO_WPMR_WPKEY_Msk & ((value) << PIO_WPMR_WPKEY_Pos))) +/* -------- PIO_WPSR : (PIO Offset: 0x00E8) Write Protect Status Register -------- */ +#define PIO_WPSR_WPVS (0x1u << 0) /**< \brief (PIO_WPSR) Write Protect Violation Status */ +#define PIO_WPSR_WPVSRC_Pos 8 +#define PIO_WPSR_WPVSRC_Msk (0xffffu << PIO_WPSR_WPVSRC_Pos) /**< \brief (PIO_WPSR) Write Protect Violation Source */ +/* -------- PIO_SCHMITT : (PIO Offset: 0x0100) Schmitt Trigger Register -------- */ +#define PIO_SCHMITT_SCHMITT0 (0x1u << 0) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT1 (0x1u << 1) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT2 (0x1u << 2) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT3 (0x1u << 3) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT4 (0x1u << 4) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT5 (0x1u << 5) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT6 (0x1u << 6) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT7 (0x1u << 7) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT8 (0x1u << 8) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT9 (0x1u << 9) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT10 (0x1u << 10) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT11 (0x1u << 11) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT12 (0x1u << 12) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT13 (0x1u << 13) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT14 (0x1u << 14) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT15 (0x1u << 15) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT16 (0x1u << 16) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT17 (0x1u << 17) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT18 (0x1u << 18) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT19 (0x1u << 19) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT20 (0x1u << 20) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT21 (0x1u << 21) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT22 (0x1u << 22) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT23 (0x1u << 23) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT24 (0x1u << 24) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT25 (0x1u << 25) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT26 (0x1u << 26) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT27 (0x1u << 27) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT28 (0x1u << 28) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT29 (0x1u << 29) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT30 (0x1u << 30) /**< \brief (PIO_SCHMITT) */ +#define PIO_SCHMITT_SCHMITT31 (0x1u << 31) /**< \brief (PIO_SCHMITT) */ +/* -------- PIO_PCMR : (PIO Offset: 0x150) Parallel Capture Mode Register -------- */ +#define PIO_PCMR_PCEN (0x1u << 0) /**< \brief (PIO_PCMR) Parallel Capture Mode Enable */ +#define PIO_PCMR_DSIZE_Pos 4 +#define PIO_PCMR_DSIZE_Msk (0x3u << PIO_PCMR_DSIZE_Pos) /**< \brief (PIO_PCMR) Parallel Capture Mode Data Size */ +#define PIO_PCMR_DSIZE(value) ((PIO_PCMR_DSIZE_Msk & ((value) << PIO_PCMR_DSIZE_Pos))) +#define PIO_PCMR_ALWYS (0x1u << 9) /**< \brief (PIO_PCMR) Parallel Capture Mode Always Sampling */ +#define PIO_PCMR_HALFS (0x1u << 10) /**< \brief (PIO_PCMR) Parallel Capture Mode Half Sampling */ +#define PIO_PCMR_FRSTS (0x1u << 11) /**< \brief (PIO_PCMR) Parallel Capture Mode First Sample */ +/* -------- PIO_PCIER : (PIO Offset: 0x154) Parallel Capture Interrupt Enable Register -------- */ +#define PIO_PCIER_DRDY (0x1u << 0) /**< \brief (PIO_PCIER) Parallel Capture Mode Data Ready Interrupt Enable */ +#define PIO_PCIER_OVRE (0x1u << 1) /**< \brief (PIO_PCIER) Parallel Capture Mode Overrun Error Interrupt Enable */ +#define PIO_PCIER_ENDRX (0x1u << 2) /**< \brief (PIO_PCIER) End of Reception Transfer Interrupt Enable */ +#define PIO_PCIER_RXBUFF (0x1u << 3) /**< \brief (PIO_PCIER) Reception Buffer Full Interrupt Enable */ +/* -------- PIO_PCIDR : (PIO Offset: 0x158) Parallel Capture Interrupt Disable Register -------- */ +#define PIO_PCIDR_DRDY (0x1u << 0) /**< \brief (PIO_PCIDR) Parallel Capture Mode Data Ready Interrupt Disable */ +#define PIO_PCIDR_OVRE (0x1u << 1) /**< \brief (PIO_PCIDR) Parallel Capture Mode Overrun Error Interrupt Disable */ +#define PIO_PCIDR_ENDRX (0x1u << 2) /**< \brief (PIO_PCIDR) End of Reception Transfer Interrupt Disable */ +#define PIO_PCIDR_RXBUFF (0x1u << 3) /**< \brief (PIO_PCIDR) Reception Buffer Full Interrupt Disable */ +/* -------- PIO_PCIMR : (PIO Offset: 0x15C) Parallel Capture Interrupt Mask Register -------- */ +#define PIO_PCIMR_DRDY (0x1u << 0) /**< \brief (PIO_PCIMR) Parallel Capture Mode Data Ready Interrupt Mask */ +#define PIO_PCIMR_OVRE (0x1u << 1) /**< \brief (PIO_PCIMR) Parallel Capture Mode Overrun Error Interrupt Mask */ +#define PIO_PCIMR_ENDRX (0x1u << 2) /**< \brief (PIO_PCIMR) End of Reception Transfer Interrupt Mask */ +#define PIO_PCIMR_RXBUFF (0x1u << 3) /**< \brief (PIO_PCIMR) Reception Buffer Full Interrupt Mask */ +/* -------- PIO_PCISR : (PIO Offset: 0x160) Parallel Capture Interrupt Status Register -------- */ +#define PIO_PCISR_DRDY (0x1u << 0) /**< \brief (PIO_PCISR) Parallel Capture Mode Data Ready */ +#define PIO_PCISR_OVRE (0x1u << 1) /**< \brief (PIO_PCISR) Parallel Capture Mode Overrun Error. */ +#define PIO_PCISR_ENDRX (0x1u << 2) /**< \brief (PIO_PCISR) End of Reception Transfer. */ +#define PIO_PCISR_RXBUFF (0x1u << 3) /**< \brief (PIO_PCISR) Reception Buffer Full */ +/* -------- PIO_PCRHR : (PIO Offset: 0x164) Parallel Capture Reception Holding Register -------- */ +#define PIO_PCRHR_RDATA_Pos 0 +#define PIO_PCRHR_RDATA_Msk (0xffffffffu << PIO_PCRHR_RDATA_Pos) /**< \brief (PIO_PCRHR) Parallel Capture Mode Reception Data. */ +/* -------- PIO_RPR : (PIO Offset: 0x168) Receive Pointer Register -------- */ +#define PIO_RPR_RXPTR_Pos 0 +#define PIO_RPR_RXPTR_Msk (0xffffffffu << PIO_RPR_RXPTR_Pos) /**< \brief (PIO_RPR) Receive Pointer Register */ +#define PIO_RPR_RXPTR(value) ((PIO_RPR_RXPTR_Msk & ((value) << PIO_RPR_RXPTR_Pos))) +/* -------- PIO_RCR : (PIO Offset: 0x16C) Receive Counter Register -------- */ +#define PIO_RCR_RXCTR_Pos 0 +#define PIO_RCR_RXCTR_Msk (0xffffu << PIO_RCR_RXCTR_Pos) /**< \brief (PIO_RCR) Receive Counter Register */ +#define PIO_RCR_RXCTR(value) ((PIO_RCR_RXCTR_Msk & ((value) << PIO_RCR_RXCTR_Pos))) +/* -------- PIO_RNPR : (PIO Offset: 0x178) Receive Next Pointer Register -------- */ +#define PIO_RNPR_RXNPTR_Pos 0 +#define PIO_RNPR_RXNPTR_Msk (0xffffffffu << PIO_RNPR_RXNPTR_Pos) /**< \brief (PIO_RNPR) Receive Next Pointer */ +#define PIO_RNPR_RXNPTR(value) ((PIO_RNPR_RXNPTR_Msk & ((value) << PIO_RNPR_RXNPTR_Pos))) +/* -------- PIO_RNCR : (PIO Offset: 0x17C) Receive Next Counter Register -------- */ +#define PIO_RNCR_RXNCTR_Pos 0 +#define PIO_RNCR_RXNCTR_Msk (0xffffu << PIO_RNCR_RXNCTR_Pos) /**< \brief (PIO_RNCR) Receive Next Counter */ +#define PIO_RNCR_RXNCTR(value) ((PIO_RNCR_RXNCTR_Msk & ((value) << PIO_RNCR_RXNCTR_Pos))) +/* -------- PIO_PTCR : (PIO Offset: 0x188) Transfer Control Register -------- */ +#define PIO_PTCR_RXTEN (0x1u << 0) /**< \brief (PIO_PTCR) Receiver Transfer Enable */ +#define PIO_PTCR_RXTDIS (0x1u << 1) /**< \brief (PIO_PTCR) Receiver Transfer Disable */ +#define PIO_PTCR_TXTEN (0x1u << 8) /**< \brief (PIO_PTCR) Transmitter Transfer Enable */ +#define PIO_PTCR_TXTDIS (0x1u << 9) /**< \brief (PIO_PTCR) Transmitter Transfer Disable */ +/* -------- PIO_PTSR : (PIO Offset: 0x18C) Transfer Status Register -------- */ +#define PIO_PTSR_RXTEN (0x1u << 0) /**< \brief (PIO_PTSR) Receiver Transfer Enable */ +#define PIO_PTSR_TXTEN (0x1u << 8) /**< \brief (PIO_PTSR) Transmitter Transfer Enable */ + +/*@}*/ + + +#endif /* _SAM4S_PIO_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_pmc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_pmc.h new file mode 100644 index 0000000..fb57be8 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_pmc.h
@@ -0,0 +1,411 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_PMC_COMPONENT_ +#define _SAM4S_PMC_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Power Management Controller */ +/* ============================================================================= */ +/** \addtogroup SAM4S_PMC Power Management Controller */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Pmc hardware registers */ +typedef struct { + WoReg PMC_SCER; /**< \brief (Pmc Offset: 0x0000) System Clock Enable Register */ + WoReg PMC_SCDR; /**< \brief (Pmc Offset: 0x0004) System Clock Disable Register */ + RoReg PMC_SCSR; /**< \brief (Pmc Offset: 0x0008) System Clock Status Register */ + RoReg Reserved1[1]; + WoReg PMC_PCER0; /**< \brief (Pmc Offset: 0x0010) Peripheral Clock Enable Register 0 */ + WoReg PMC_PCDR0; /**< \brief (Pmc Offset: 0x0014) Peripheral Clock Disable Register 0 */ + RoReg PMC_PCSR0; /**< \brief (Pmc Offset: 0x0018) Peripheral Clock Status Register 0 */ + RoReg Reserved2[1]; + RwReg CKGR_MOR; /**< \brief (Pmc Offset: 0x0020) Main Oscillator Register */ + RwReg CKGR_MCFR; /**< \brief (Pmc Offset: 0x0024) Main Clock Frequency Register */ + RwReg CKGR_PLLAR; /**< \brief (Pmc Offset: 0x0028) PLLA Register */ + RwReg CKGR_PLLBR; /**< \brief (Pmc Offset: 0x002C) PLLB Register */ + RwReg PMC_MCKR; /**< \brief (Pmc Offset: 0x0030) Master Clock Register */ + RoReg Reserved3[1]; + RwReg PMC_USB; /**< \brief (Pmc Offset: 0x0038) USB Clock Register */ + RoReg Reserved4[1]; + RwReg PMC_PCK[3]; /**< \brief (Pmc Offset: 0x0040) Programmable Clock 0 Register */ + RoReg Reserved5[5]; + WoReg PMC_IER; /**< \brief (Pmc Offset: 0x0060) Interrupt Enable Register */ + WoReg PMC_IDR; /**< \brief (Pmc Offset: 0x0064) Interrupt Disable Register */ + RoReg PMC_SR; /**< \brief (Pmc Offset: 0x0068) Status Register */ + RoReg PMC_IMR; /**< \brief (Pmc Offset: 0x006C) Interrupt Mask Register */ + RwReg PMC_FSMR; /**< \brief (Pmc Offset: 0x0070) Fast Startup Mode Register */ + RwReg PMC_FSPR; /**< \brief (Pmc Offset: 0x0074) Fast Startup Polarity Register */ + WoReg PMC_FOCR; /**< \brief (Pmc Offset: 0x0078) Fault Output Clear Register */ + RoReg Reserved6[26]; + RwReg PMC_WPMR; /**< \brief (Pmc Offset: 0x00E4) Write Protect Mode Register */ + RoReg PMC_WPSR; /**< \brief (Pmc Offset: 0x00E8) Write Protect Status Register */ + RoReg Reserved7[5]; + WoReg PMC_PCER1; /**< \brief (Pmc Offset: 0x0100) Peripheral Clock Enable Register 1 */ + WoReg PMC_PCDR1; /**< \brief (Pmc Offset: 0x0104) Peripheral Clock Disable Register 1 */ + RoReg PMC_PCSR1; /**< \brief (Pmc Offset: 0x0108) Peripheral Clock Status Register 1 */ + RoReg Reserved8[1]; + RwReg PMC_OCR; /**< \brief (Pmc Offset: 0x0110) Oscillator Calibration Register */ +} Pmc; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- PMC_SCER : (PMC Offset: 0x0000) System Clock Enable Register -------- */ +#define PMC_SCER_UDP (0x1u << 7) /**< \brief (PMC_SCER) USB Device Port Clock Enable */ +#define PMC_SCER_PCK0 (0x1u << 8) /**< \brief (PMC_SCER) Programmable Clock 0 Output Enable */ +#define PMC_SCER_PCK1 (0x1u << 9) /**< \brief (PMC_SCER) Programmable Clock 1 Output Enable */ +#define PMC_SCER_PCK2 (0x1u << 10) /**< \brief (PMC_SCER) Programmable Clock 2 Output Enable */ +/* -------- PMC_SCDR : (PMC Offset: 0x0004) System Clock Disable Register -------- */ +#define PMC_SCDR_UDP (0x1u << 7) /**< \brief (PMC_SCDR) USB Device Port Clock Disable */ +#define PMC_SCDR_PCK0 (0x1u << 8) /**< \brief (PMC_SCDR) Programmable Clock 0 Output Disable */ +#define PMC_SCDR_PCK1 (0x1u << 9) /**< \brief (PMC_SCDR) Programmable Clock 1 Output Disable */ +#define PMC_SCDR_PCK2 (0x1u << 10) /**< \brief (PMC_SCDR) Programmable Clock 2 Output Disable */ +/* -------- PMC_SCSR : (PMC Offset: 0x0008) System Clock Status Register -------- */ +#define PMC_SCSR_UDP (0x1u << 7) /**< \brief (PMC_SCSR) USB Device Port Clock Status */ +#define PMC_SCSR_PCK0 (0x1u << 8) /**< \brief (PMC_SCSR) Programmable Clock 0 Output Status */ +#define PMC_SCSR_PCK1 (0x1u << 9) /**< \brief (PMC_SCSR) Programmable Clock 1 Output Status */ +#define PMC_SCSR_PCK2 (0x1u << 10) /**< \brief (PMC_SCSR) Programmable Clock 2 Output Status */ +/* -------- PMC_PCER0 : (PMC Offset: 0x0010) Peripheral Clock Enable Register 0 -------- */ +#define PMC_PCER0_PID2 (0x1u << 2) /**< \brief (PMC_PCER0) Peripheral Clock 2 Enable */ +#define PMC_PCER0_PID3 (0x1u << 3) /**< \brief (PMC_PCER0) Peripheral Clock 3 Enable */ +#define PMC_PCER0_PID4 (0x1u << 4) /**< \brief (PMC_PCER0) Peripheral Clock 4 Enable */ +#define PMC_PCER0_PID5 (0x1u << 5) /**< \brief (PMC_PCER0) Peripheral Clock 5 Enable */ +#define PMC_PCER0_PID6 (0x1u << 6) /**< \brief (PMC_PCER0) Peripheral Clock 6 Enable */ +#define PMC_PCER0_PID7 (0x1u << 7) /**< \brief (PMC_PCER0) Peripheral Clock 7 Enable */ +#define PMC_PCER0_PID8 (0x1u << 8) /**< \brief (PMC_PCER0) Peripheral Clock 8 Enable */ +#define PMC_PCER0_PID9 (0x1u << 9) /**< \brief (PMC_PCER0) Peripheral Clock 9 Enable */ +#define PMC_PCER0_PID10 (0x1u << 10) /**< \brief (PMC_PCER0) Peripheral Clock 10 Enable */ +#define PMC_PCER0_PID11 (0x1u << 11) /**< \brief (PMC_PCER0) Peripheral Clock 11 Enable */ +#define PMC_PCER0_PID12 (0x1u << 12) /**< \brief (PMC_PCER0) Peripheral Clock 12 Enable */ +#define PMC_PCER0_PID13 (0x1u << 13) /**< \brief (PMC_PCER0) Peripheral Clock 13 Enable */ +#define PMC_PCER0_PID14 (0x1u << 14) /**< \brief (PMC_PCER0) Peripheral Clock 14 Enable */ +#define PMC_PCER0_PID15 (0x1u << 15) /**< \brief (PMC_PCER0) Peripheral Clock 15 Enable */ +#define PMC_PCER0_PID16 (0x1u << 16) /**< \brief (PMC_PCER0) Peripheral Clock 16 Enable */ +#define PMC_PCER0_PID17 (0x1u << 17) /**< \brief (PMC_PCER0) Peripheral Clock 17 Enable */ +#define PMC_PCER0_PID18 (0x1u << 18) /**< \brief (PMC_PCER0) Peripheral Clock 18 Enable */ +#define PMC_PCER0_PID19 (0x1u << 19) /**< \brief (PMC_PCER0) Peripheral Clock 19 Enable */ +#define PMC_PCER0_PID20 (0x1u << 20) /**< \brief (PMC_PCER0) Peripheral Clock 20 Enable */ +#define PMC_PCER0_PID21 (0x1u << 21) /**< \brief (PMC_PCER0) Peripheral Clock 21 Enable */ +#define PMC_PCER0_PID22 (0x1u << 22) /**< \brief (PMC_PCER0) Peripheral Clock 22 Enable */ +#define PMC_PCER0_PID23 (0x1u << 23) /**< \brief (PMC_PCER0) Peripheral Clock 23 Enable */ +#define PMC_PCER0_PID24 (0x1u << 24) /**< \brief (PMC_PCER0) Peripheral Clock 24 Enable */ +#define PMC_PCER0_PID25 (0x1u << 25) /**< \brief (PMC_PCER0) Peripheral Clock 25 Enable */ +#define PMC_PCER0_PID26 (0x1u << 26) /**< \brief (PMC_PCER0) Peripheral Clock 26 Enable */ +#define PMC_PCER0_PID27 (0x1u << 27) /**< \brief (PMC_PCER0) Peripheral Clock 27 Enable */ +#define PMC_PCER0_PID28 (0x1u << 28) /**< \brief (PMC_PCER0) Peripheral Clock 28 Enable */ +#define PMC_PCER0_PID29 (0x1u << 29) /**< \brief (PMC_PCER0) Peripheral Clock 29 Enable */ +#define PMC_PCER0_PID30 (0x1u << 30) /**< \brief (PMC_PCER0) Peripheral Clock 30 Enable */ +#define PMC_PCER0_PID31 (0x1u << 31) /**< \brief (PMC_PCER0) Peripheral Clock 31 Enable */ +/* -------- PMC_PCDR0 : (PMC Offset: 0x0014) Peripheral Clock Disable Register 0 -------- */ +#define PMC_PCDR0_PID2 (0x1u << 2) /**< \brief (PMC_PCDR0) Peripheral Clock 2 Disable */ +#define PMC_PCDR0_PID3 (0x1u << 3) /**< \brief (PMC_PCDR0) Peripheral Clock 3 Disable */ +#define PMC_PCDR0_PID4 (0x1u << 4) /**< \brief (PMC_PCDR0) Peripheral Clock 4 Disable */ +#define PMC_PCDR0_PID5 (0x1u << 5) /**< \brief (PMC_PCDR0) Peripheral Clock 5 Disable */ +#define PMC_PCDR0_PID6 (0x1u << 6) /**< \brief (PMC_PCDR0) Peripheral Clock 6 Disable */ +#define PMC_PCDR0_PID7 (0x1u << 7) /**< \brief (PMC_PCDR0) Peripheral Clock 7 Disable */ +#define PMC_PCDR0_PID8 (0x1u << 8) /**< \brief (PMC_PCDR0) Peripheral Clock 8 Disable */ +#define PMC_PCDR0_PID9 (0x1u << 9) /**< \brief (PMC_PCDR0) Peripheral Clock 9 Disable */ +#define PMC_PCDR0_PID10 (0x1u << 10) /**< \brief (PMC_PCDR0) Peripheral Clock 10 Disable */ +#define PMC_PCDR0_PID11 (0x1u << 11) /**< \brief (PMC_PCDR0) Peripheral Clock 11 Disable */ +#define PMC_PCDR0_PID12 (0x1u << 12) /**< \brief (PMC_PCDR0) Peripheral Clock 12 Disable */ +#define PMC_PCDR0_PID13 (0x1u << 13) /**< \brief (PMC_PCDR0) Peripheral Clock 13 Disable */ +#define PMC_PCDR0_PID14 (0x1u << 14) /**< \brief (PMC_PCDR0) Peripheral Clock 14 Disable */ +#define PMC_PCDR0_PID15 (0x1u << 15) /**< \brief (PMC_PCDR0) Peripheral Clock 15 Disable */ +#define PMC_PCDR0_PID16 (0x1u << 16) /**< \brief (PMC_PCDR0) Peripheral Clock 16 Disable */ +#define PMC_PCDR0_PID17 (0x1u << 17) /**< \brief (PMC_PCDR0) Peripheral Clock 17 Disable */ +#define PMC_PCDR0_PID18 (0x1u << 18) /**< \brief (PMC_PCDR0) Peripheral Clock 18 Disable */ +#define PMC_PCDR0_PID19 (0x1u << 19) /**< \brief (PMC_PCDR0) Peripheral Clock 19 Disable */ +#define PMC_PCDR0_PID20 (0x1u << 20) /**< \brief (PMC_PCDR0) Peripheral Clock 20 Disable */ +#define PMC_PCDR0_PID21 (0x1u << 21) /**< \brief (PMC_PCDR0) Peripheral Clock 21 Disable */ +#define PMC_PCDR0_PID22 (0x1u << 22) /**< \brief (PMC_PCDR0) Peripheral Clock 22 Disable */ +#define PMC_PCDR0_PID23 (0x1u << 23) /**< \brief (PMC_PCDR0) Peripheral Clock 23 Disable */ +#define PMC_PCDR0_PID24 (0x1u << 24) /**< \brief (PMC_PCDR0) Peripheral Clock 24 Disable */ +#define PMC_PCDR0_PID25 (0x1u << 25) /**< \brief (PMC_PCDR0) Peripheral Clock 25 Disable */ +#define PMC_PCDR0_PID26 (0x1u << 26) /**< \brief (PMC_PCDR0) Peripheral Clock 26 Disable */ +#define PMC_PCDR0_PID27 (0x1u << 27) /**< \brief (PMC_PCDR0) Peripheral Clock 27 Disable */ +#define PMC_PCDR0_PID28 (0x1u << 28) /**< \brief (PMC_PCDR0) Peripheral Clock 28 Disable */ +#define PMC_PCDR0_PID29 (0x1u << 29) /**< \brief (PMC_PCDR0) Peripheral Clock 29 Disable */ +#define PMC_PCDR0_PID30 (0x1u << 30) /**< \brief (PMC_PCDR0) Peripheral Clock 30 Disable */ +#define PMC_PCDR0_PID31 (0x1u << 31) /**< \brief (PMC_PCDR0) Peripheral Clock 31 Disable */ +/* -------- PMC_PCSR0 : (PMC Offset: 0x0018) Peripheral Clock Status Register 0 -------- */ +#define PMC_PCSR0_PID2 (0x1u << 2) /**< \brief (PMC_PCSR0) Peripheral Clock 2 Status */ +#define PMC_PCSR0_PID3 (0x1u << 3) /**< \brief (PMC_PCSR0) Peripheral Clock 3 Status */ +#define PMC_PCSR0_PID4 (0x1u << 4) /**< \brief (PMC_PCSR0) Peripheral Clock 4 Status */ +#define PMC_PCSR0_PID5 (0x1u << 5) /**< \brief (PMC_PCSR0) Peripheral Clock 5 Status */ +#define PMC_PCSR0_PID6 (0x1u << 6) /**< \brief (PMC_PCSR0) Peripheral Clock 6 Status */ +#define PMC_PCSR0_PID7 (0x1u << 7) /**< \brief (PMC_PCSR0) Peripheral Clock 7 Status */ +#define PMC_PCSR0_PID8 (0x1u << 8) /**< \brief (PMC_PCSR0) Peripheral Clock 8 Status */ +#define PMC_PCSR0_PID9 (0x1u << 9) /**< \brief (PMC_PCSR0) Peripheral Clock 9 Status */ +#define PMC_PCSR0_PID10 (0x1u << 10) /**< \brief (PMC_PCSR0) Peripheral Clock 10 Status */ +#define PMC_PCSR0_PID11 (0x1u << 11) /**< \brief (PMC_PCSR0) Peripheral Clock 11 Status */ +#define PMC_PCSR0_PID12 (0x1u << 12) /**< \brief (PMC_PCSR0) Peripheral Clock 12 Status */ +#define PMC_PCSR0_PID13 (0x1u << 13) /**< \brief (PMC_PCSR0) Peripheral Clock 13 Status */ +#define PMC_PCSR0_PID14 (0x1u << 14) /**< \brief (PMC_PCSR0) Peripheral Clock 14 Status */ +#define PMC_PCSR0_PID15 (0x1u << 15) /**< \brief (PMC_PCSR0) Peripheral Clock 15 Status */ +#define PMC_PCSR0_PID16 (0x1u << 16) /**< \brief (PMC_PCSR0) Peripheral Clock 16 Status */ +#define PMC_PCSR0_PID17 (0x1u << 17) /**< \brief (PMC_PCSR0) Peripheral Clock 17 Status */ +#define PMC_PCSR0_PID18 (0x1u << 18) /**< \brief (PMC_PCSR0) Peripheral Clock 18 Status */ +#define PMC_PCSR0_PID19 (0x1u << 19) /**< \brief (PMC_PCSR0) Peripheral Clock 19 Status */ +#define PMC_PCSR0_PID20 (0x1u << 20) /**< \brief (PMC_PCSR0) Peripheral Clock 20 Status */ +#define PMC_PCSR0_PID21 (0x1u << 21) /**< \brief (PMC_PCSR0) Peripheral Clock 21 Status */ +#define PMC_PCSR0_PID22 (0x1u << 22) /**< \brief (PMC_PCSR0) Peripheral Clock 22 Status */ +#define PMC_PCSR0_PID23 (0x1u << 23) /**< \brief (PMC_PCSR0) Peripheral Clock 23 Status */ +#define PMC_PCSR0_PID24 (0x1u << 24) /**< \brief (PMC_PCSR0) Peripheral Clock 24 Status */ +#define PMC_PCSR0_PID25 (0x1u << 25) /**< \brief (PMC_PCSR0) Peripheral Clock 25 Status */ +#define PMC_PCSR0_PID26 (0x1u << 26) /**< \brief (PMC_PCSR0) Peripheral Clock 26 Status */ +#define PMC_PCSR0_PID27 (0x1u << 27) /**< \brief (PMC_PCSR0) Peripheral Clock 27 Status */ +#define PMC_PCSR0_PID28 (0x1u << 28) /**< \brief (PMC_PCSR0) Peripheral Clock 28 Status */ +#define PMC_PCSR0_PID29 (0x1u << 29) /**< \brief (PMC_PCSR0) Peripheral Clock 29 Status */ +#define PMC_PCSR0_PID30 (0x1u << 30) /**< \brief (PMC_PCSR0) Peripheral Clock 30 Status */ +#define PMC_PCSR0_PID31 (0x1u << 31) /**< \brief (PMC_PCSR0) Peripheral Clock 31 Status */ +/* -------- CKGR_MOR : (PMC Offset: 0x0020) Main Oscillator Register -------- */ +#define CKGR_MOR_MOSCXTEN (0x1u << 0) /**< \brief (CKGR_MOR) Main Crystal Oscillator Enable */ +#define CKGR_MOR_MOSCXTBY (0x1u << 1) /**< \brief (CKGR_MOR) Main Crystal Oscillator Bypass */ +#define CKGR_MOR_MOSCRCEN (0x1u << 3) /**< \brief (CKGR_MOR) Main On-Chip RC Oscillator Enable */ +#define CKGR_MOR_MOSCRCF_Pos 4 +#define CKGR_MOR_MOSCRCF_Msk (0x7u << CKGR_MOR_MOSCRCF_Pos) /**< \brief (CKGR_MOR) Main On-Chip RC Oscillator Frequency Selection */ +#define CKGR_MOR_MOSCRCF_4_MHz (0x0u << 4) /**< \brief (CKGR_MOR) The Fast RC Oscillator Frequency is at 4 MHz (default) */ +#define CKGR_MOR_MOSCRCF_8_MHz (0x1u << 4) /**< \brief (CKGR_MOR) The Fast RC Oscillator Frequency is at 8 MHz */ +#define CKGR_MOR_MOSCRCF_12_MHz (0x2u << 4) /**< \brief (CKGR_MOR) The Fast RC Oscillator Frequency is at 12 MHz */ +#define CKGR_MOR_MOSCXTST_Pos 8 +#define CKGR_MOR_MOSCXTST_Msk (0xffu << CKGR_MOR_MOSCXTST_Pos) /**< \brief (CKGR_MOR) Main Crystal Oscillator Start-up Time */ +#define CKGR_MOR_MOSCXTST(value) ((CKGR_MOR_MOSCXTST_Msk & ((value) << CKGR_MOR_MOSCXTST_Pos))) +#define CKGR_MOR_KEY_Pos 16 +#define CKGR_MOR_KEY_Msk (0xffu << CKGR_MOR_KEY_Pos) /**< \brief (CKGR_MOR) Password */ +#define CKGR_MOR_KEY(value) ((CKGR_MOR_KEY_Msk & ((value) << CKGR_MOR_KEY_Pos))) +#define CKGR_MOR_MOSCSEL (0x1u << 24) /**< \brief (CKGR_MOR) Main Oscillator Selection */ +#define CKGR_MOR_CFDEN (0x1u << 25) /**< \brief (CKGR_MOR) Clock Failure Detector Enable */ +/* -------- CKGR_MCFR : (PMC Offset: 0x0024) Main Clock Frequency Register -------- */ +#define CKGR_MCFR_MAINF_Pos 0 +#define CKGR_MCFR_MAINF_Msk (0xffffu << CKGR_MCFR_MAINF_Pos) /**< \brief (CKGR_MCFR) Main Clock Frequency */ +#define CKGR_MCFR_MAINF(value) ((CKGR_MCFR_MAINF_Msk & ((value) << CKGR_MCFR_MAINF_Pos))) +#define CKGR_MCFR_MAINFRDY (0x1u << 16) /**< \brief (CKGR_MCFR) Main Clock Ready */ +#define CKGR_MCFR_RCMEAS (0x1u << 20) /**< \brief (CKGR_MCFR) RC Oscillator Frequency Measure (write-only) */ +/* -------- CKGR_PLLAR : (PMC Offset: 0x0028) PLLA Register -------- */ +#define CKGR_PLLAR_DIVA_Pos 0 +#define CKGR_PLLAR_DIVA_Msk (0xffu << CKGR_PLLAR_DIVA_Pos) /**< \brief (CKGR_PLLAR) Divider */ +#define CKGR_PLLAR_DIVA(value) ((CKGR_PLLAR_DIVA_Msk & ((value) << CKGR_PLLAR_DIVA_Pos))) +#define CKGR_PLLAR_PLLACOUNT_Pos 8 +#define CKGR_PLLAR_PLLACOUNT_Msk (0x3fu << CKGR_PLLAR_PLLACOUNT_Pos) /**< \brief (CKGR_PLLAR) PLLA Counter */ +#define CKGR_PLLAR_PLLACOUNT(value) ((CKGR_PLLAR_PLLACOUNT_Msk & ((value) << CKGR_PLLAR_PLLACOUNT_Pos))) +#define CKGR_PLLAR_MULA_Pos 16 +#define CKGR_PLLAR_MULA_Msk (0x7ffu << CKGR_PLLAR_MULA_Pos) /**< \brief (CKGR_PLLAR) PLLA Multiplier */ +#define CKGR_PLLAR_MULA(value) ((CKGR_PLLAR_MULA_Msk & ((value) << CKGR_PLLAR_MULA_Pos))) +#define CKGR_PLLAR_ONE (0x1u << 29) /**< \brief (CKGR_PLLAR) Must Be Set to 1 */ +/* -------- CKGR_PLLBR : (PMC Offset: 0x002C) PLLB Register -------- */ +#define CKGR_PLLBR_DIVB_Pos 0 +#define CKGR_PLLBR_DIVB_Msk (0xffu << CKGR_PLLBR_DIVB_Pos) /**< \brief (CKGR_PLLBR) Divider */ +#define CKGR_PLLBR_DIVB(value) ((CKGR_PLLBR_DIVB_Msk & ((value) << CKGR_PLLBR_DIVB_Pos))) +#define CKGR_PLLBR_PLLBCOUNT_Pos 8 +#define CKGR_PLLBR_PLLBCOUNT_Msk (0x3fu << CKGR_PLLBR_PLLBCOUNT_Pos) /**< \brief (CKGR_PLLBR) PLLB Counter */ +#define CKGR_PLLBR_PLLBCOUNT(value) ((CKGR_PLLBR_PLLBCOUNT_Msk & ((value) << CKGR_PLLBR_PLLBCOUNT_Pos))) +#define CKGR_PLLBR_MULB_Pos 16 +#define CKGR_PLLBR_MULB_Msk (0x7ffu << CKGR_PLLBR_MULB_Pos) /**< \brief (CKGR_PLLBR) PLLB Multiplier */ +#define CKGR_PLLBR_MULB(value) ((CKGR_PLLBR_MULB_Msk & ((value) << CKGR_PLLBR_MULB_Pos))) +/* -------- PMC_MCKR : (PMC Offset: 0x0030) Master Clock Register -------- */ +#define PMC_MCKR_CSS_Pos 0 +#define PMC_MCKR_CSS_Msk (0x3u << PMC_MCKR_CSS_Pos) /**< \brief (PMC_MCKR) Master Clock Source Selection */ +#define PMC_MCKR_CSS_SLOW_CLK (0x0u << 0) /**< \brief (PMC_MCKR) Slow Clock is selected */ +#define PMC_MCKR_CSS_MAIN_CLK (0x1u << 0) /**< \brief (PMC_MCKR) Main Clock is selected */ +#define PMC_MCKR_CSS_PLLA_CLK (0x2u << 0) /**< \brief (PMC_MCKR) PLLA Clock is selected */ +#define PMC_MCKR_CSS_PLLB_CLK (0x3u << 0) /**< \brief (PMC_MCKR) PLLBClock is selected */ +#define PMC_MCKR_PRES_Pos 4 +#define PMC_MCKR_PRES_Msk (0x7u << PMC_MCKR_PRES_Pos) /**< \brief (PMC_MCKR) Processor Clock Prescaler */ +#define PMC_MCKR_PRES_CLK_1 (0x0u << 4) /**< \brief (PMC_MCKR) Selected clock */ +#define PMC_MCKR_PRES_CLK_2 (0x1u << 4) /**< \brief (PMC_MCKR) Selected clock divided by 2 */ +#define PMC_MCKR_PRES_CLK_4 (0x2u << 4) /**< \brief (PMC_MCKR) Selected clock divided by 4 */ +#define PMC_MCKR_PRES_CLK_8 (0x3u << 4) /**< \brief (PMC_MCKR) Selected clock divided by 8 */ +#define PMC_MCKR_PRES_CLK_16 (0x4u << 4) /**< \brief (PMC_MCKR) Selected clock divided by 16 */ +#define PMC_MCKR_PRES_CLK_32 (0x5u << 4) /**< \brief (PMC_MCKR) Selected clock divided by 32 */ +#define PMC_MCKR_PRES_CLK_64 (0x6u << 4) /**< \brief (PMC_MCKR) Selected clock divided by 64 */ +#define PMC_MCKR_PRES_CLK_3 (0x7u << 4) /**< \brief (PMC_MCKR) Selected clock divided by 3 */ +#define PMC_MCKR_PLLADIV2 (0x1u << 12) /**< \brief (PMC_MCKR) PLLA Divisor by 2 */ +#define PMC_MCKR_PLLBDIV2 (0x1u << 13) /**< \brief (PMC_MCKR) PLLB Divisor by 2 */ +/* -------- PMC_USB : (PMC Offset: 0x0038) USB Clock Register -------- */ +#define PMC_USB_USBS (0x1u << 0) /**< \brief (PMC_USB) USB Input Clock Selection */ +#define PMC_USB_USBDIV_Pos 8 +#define PMC_USB_USBDIV_Msk (0xfu << PMC_USB_USBDIV_Pos) /**< \brief (PMC_USB) Divider for USB Clock. */ +#define PMC_USB_USBDIV(value) ((PMC_USB_USBDIV_Msk & ((value) << PMC_USB_USBDIV_Pos))) +/* -------- PMC_PCK[3] : (PMC Offset: 0x0040) Programmable Clock 0 Register -------- */ +#define PMC_PCK_CSS_Pos 0 +#define PMC_PCK_CSS_Msk (0x7u << PMC_PCK_CSS_Pos) /**< \brief (PMC_PCK[3]) Master Clock Source Selection */ +#define PMC_PCK_CSS_SLOW_CLK (0x0u << 0) /**< \brief (PMC_PCK[3]) Slow Clock is selected */ +#define PMC_PCK_CSS_MAIN_CLK (0x1u << 0) /**< \brief (PMC_PCK[3]) Main Clock is selected */ +#define PMC_PCK_CSS_PLLA_CLK (0x2u << 0) /**< \brief (PMC_PCK[3]) PLLA Clock is selected */ +#define PMC_PCK_CSS_PLLB_CLK (0x3u << 0) /**< \brief (PMC_PCK[3]) PLLB Clock is selected */ +#define PMC_PCK_CSS_MCK (0x4u << 0) /**< \brief (PMC_PCK[3]) Master Clock is selected */ +#define PMC_PCK_PRES_Pos 4 +#define PMC_PCK_PRES_Msk (0x7u << PMC_PCK_PRES_Pos) /**< \brief (PMC_PCK[3]) Programmable Clock Prescaler */ +#define PMC_PCK_PRES_CLK_1 (0x0u << 4) /**< \brief (PMC_PCK[3]) Selected clock */ +#define PMC_PCK_PRES_CLK_2 (0x1u << 4) /**< \brief (PMC_PCK[3]) Selected clock divided by 2 */ +#define PMC_PCK_PRES_CLK_4 (0x2u << 4) /**< \brief (PMC_PCK[3]) Selected clock divided by 4 */ +#define PMC_PCK_PRES_CLK_8 (0x3u << 4) /**< \brief (PMC_PCK[3]) Selected clock divided by 8 */ +#define PMC_PCK_PRES_CLK_16 (0x4u << 4) /**< \brief (PMC_PCK[3]) Selected clock divided by 16 */ +#define PMC_PCK_PRES_CLK_32 (0x5u << 4) /**< \brief (PMC_PCK[3]) Selected clock divided by 32 */ +#define PMC_PCK_PRES_CLK_64 (0x6u << 4) /**< \brief (PMC_PCK[3]) Selected clock divided by 64 */ +/* -------- PMC_IER : (PMC Offset: 0x0060) Interrupt Enable Register -------- */ +#define PMC_IER_MOSCXTS (0x1u << 0) /**< \brief (PMC_IER) Main Crystal Oscillator Status Interrupt Enable */ +#define PMC_IER_LOCKA (0x1u << 1) /**< \brief (PMC_IER) PLLA Lock Interrupt Enable */ +#define PMC_IER_LOCKB (0x1u << 2) /**< \brief (PMC_IER) PLLB Lock Interrupt Enable */ +#define PMC_IER_MCKRDY (0x1u << 3) /**< \brief (PMC_IER) Master Clock Ready Interrupt Enable */ +#define PMC_IER_PCKRDY0 (0x1u << 8) /**< \brief (PMC_IER) Programmable Clock Ready 0 Interrupt Enable */ +#define PMC_IER_PCKRDY1 (0x1u << 9) /**< \brief (PMC_IER) Programmable Clock Ready 1 Interrupt Enable */ +#define PMC_IER_PCKRDY2 (0x1u << 10) /**< \brief (PMC_IER) Programmable Clock Ready 2 Interrupt Enable */ +#define PMC_IER_MOSCSELS (0x1u << 16) /**< \brief (PMC_IER) Main Oscillator Selection Status Interrupt Enable */ +#define PMC_IER_MOSCRCS (0x1u << 17) /**< \brief (PMC_IER) Main On-Chip RC Status Interrupt Enable */ +#define PMC_IER_CFDEV (0x1u << 18) /**< \brief (PMC_IER) Clock Failure Detector Event Interrupt Enable */ +/* -------- PMC_IDR : (PMC Offset: 0x0064) Interrupt Disable Register -------- */ +#define PMC_IDR_MOSCXTS (0x1u << 0) /**< \brief (PMC_IDR) Main Crystal Oscillator Status Interrupt Disable */ +#define PMC_IDR_LOCKA (0x1u << 1) /**< \brief (PMC_IDR) PLLA Lock Interrupt Disable */ +#define PMC_IDR_LOCKB (0x1u << 2) /**< \brief (PMC_IDR) PLLB Lock Interrupt Disable */ +#define PMC_IDR_MCKRDY (0x1u << 3) /**< \brief (PMC_IDR) Master Clock Ready Interrupt Disable */ +#define PMC_IDR_PCKRDY0 (0x1u << 8) /**< \brief (PMC_IDR) Programmable Clock Ready 0 Interrupt Disable */ +#define PMC_IDR_PCKRDY1 (0x1u << 9) /**< \brief (PMC_IDR) Programmable Clock Ready 1 Interrupt Disable */ +#define PMC_IDR_PCKRDY2 (0x1u << 10) /**< \brief (PMC_IDR) Programmable Clock Ready 2 Interrupt Disable */ +#define PMC_IDR_MOSCSELS (0x1u << 16) /**< \brief (PMC_IDR) Main Oscillator Selection Status Interrupt Disable */ +#define PMC_IDR_MOSCRCS (0x1u << 17) /**< \brief (PMC_IDR) Main On-Chip RC Status Interrupt Disable */ +#define PMC_IDR_CFDEV (0x1u << 18) /**< \brief (PMC_IDR) Clock Failure Detector Event Interrupt Disable */ +/* -------- PMC_SR : (PMC Offset: 0x0068) Status Register -------- */ +#define PMC_SR_MOSCXTS (0x1u << 0) /**< \brief (PMC_SR) Main XTAL Oscillator Status */ +#define PMC_SR_LOCKA (0x1u << 1) /**< \brief (PMC_SR) PLLA Lock Status */ +#define PMC_SR_LOCKB (0x1u << 2) /**< \brief (PMC_SR) PLLB Lock Status */ +#define PMC_SR_MCKRDY (0x1u << 3) /**< \brief (PMC_SR) Master Clock Status */ +#define PMC_SR_OSCSELS (0x1u << 7) /**< \brief (PMC_SR) Slow Clock Oscillator Selection */ +#define PMC_SR_PCKRDY0 (0x1u << 8) /**< \brief (PMC_SR) Programmable Clock Ready Status */ +#define PMC_SR_PCKRDY1 (0x1u << 9) /**< \brief (PMC_SR) Programmable Clock Ready Status */ +#define PMC_SR_PCKRDY2 (0x1u << 10) /**< \brief (PMC_SR) Programmable Clock Ready Status */ +#define PMC_SR_MOSCSELS (0x1u << 16) /**< \brief (PMC_SR) Main Oscillator Selection Status */ +#define PMC_SR_MOSCRCS (0x1u << 17) /**< \brief (PMC_SR) Main On-Chip RC Oscillator Status */ +#define PMC_SR_CFDEV (0x1u << 18) /**< \brief (PMC_SR) Clock Failure Detector Event */ +#define PMC_SR_CFDS (0x1u << 19) /**< \brief (PMC_SR) Clock Failure Detector Status */ +#define PMC_SR_FOS (0x1u << 20) /**< \brief (PMC_SR) Clock Failure Detector Fault Output Status */ +/* -------- PMC_IMR : (PMC Offset: 0x006C) Interrupt Mask Register -------- */ +#define PMC_IMR_MOSCXTS (0x1u << 0) /**< \brief (PMC_IMR) Main Crystal Oscillator Status Interrupt Mask */ +#define PMC_IMR_LOCKA (0x1u << 1) /**< \brief (PMC_IMR) PLLA Lock Interrupt Mask */ +#define PMC_IMR_LOCKB (0x1u << 2) /**< \brief (PMC_IMR) PLLB Lock Interrupt Mask */ +#define PMC_IMR_MCKRDY (0x1u << 3) /**< \brief (PMC_IMR) Master Clock Ready Interrupt Mask */ +#define PMC_IMR_PCKRDY0 (0x1u << 8) /**< \brief (PMC_IMR) Programmable Clock Ready 0 Interrupt Mask */ +#define PMC_IMR_PCKRDY1 (0x1u << 9) /**< \brief (PMC_IMR) Programmable Clock Ready 1 Interrupt Mask */ +#define PMC_IMR_PCKRDY2 (0x1u << 10) /**< \brief (PMC_IMR) Programmable Clock Ready 2 Interrupt Mask */ +#define PMC_IMR_MOSCSELS (0x1u << 16) /**< \brief (PMC_IMR) Main Oscillator Selection Status Interrupt Mask */ +#define PMC_IMR_MOSCRCS (0x1u << 17) /**< \brief (PMC_IMR) Main On-Chip RC Status Interrupt Mask */ +#define PMC_IMR_CFDEV (0x1u << 18) /**< \brief (PMC_IMR) Clock Failure Detector Event Interrupt Mask */ +/* -------- PMC_FSMR : (PMC Offset: 0x0070) Fast Startup Mode Register -------- */ +#define PMC_FSMR_FSTT0 (0x1u << 0) /**< \brief (PMC_FSMR) Fast Startup Input Enable 0 */ +#define PMC_FSMR_FSTT1 (0x1u << 1) /**< \brief (PMC_FSMR) Fast Startup Input Enable 1 */ +#define PMC_FSMR_FSTT2 (0x1u << 2) /**< \brief (PMC_FSMR) Fast Startup Input Enable 2 */ +#define PMC_FSMR_FSTT3 (0x1u << 3) /**< \brief (PMC_FSMR) Fast Startup Input Enable 3 */ +#define PMC_FSMR_FSTT4 (0x1u << 4) /**< \brief (PMC_FSMR) Fast Startup Input Enable 4 */ +#define PMC_FSMR_FSTT5 (0x1u << 5) /**< \brief (PMC_FSMR) Fast Startup Input Enable 5 */ +#define PMC_FSMR_FSTT6 (0x1u << 6) /**< \brief (PMC_FSMR) Fast Startup Input Enable 6 */ +#define PMC_FSMR_FSTT7 (0x1u << 7) /**< \brief (PMC_FSMR) Fast Startup Input Enable 7 */ +#define PMC_FSMR_FSTT8 (0x1u << 8) /**< \brief (PMC_FSMR) Fast Startup Input Enable 8 */ +#define PMC_FSMR_FSTT9 (0x1u << 9) /**< \brief (PMC_FSMR) Fast Startup Input Enable 9 */ +#define PMC_FSMR_FSTT10 (0x1u << 10) /**< \brief (PMC_FSMR) Fast Startup Input Enable 10 */ +#define PMC_FSMR_FSTT11 (0x1u << 11) /**< \brief (PMC_FSMR) Fast Startup Input Enable 11 */ +#define PMC_FSMR_FSTT12 (0x1u << 12) /**< \brief (PMC_FSMR) Fast Startup Input Enable 12 */ +#define PMC_FSMR_FSTT13 (0x1u << 13) /**< \brief (PMC_FSMR) Fast Startup Input Enable 13 */ +#define PMC_FSMR_FSTT14 (0x1u << 14) /**< \brief (PMC_FSMR) Fast Startup Input Enable 14 */ +#define PMC_FSMR_FSTT15 (0x1u << 15) /**< \brief (PMC_FSMR) Fast Startup Input Enable 15 */ +#define PMC_FSMR_RTTAL (0x1u << 16) /**< \brief (PMC_FSMR) RTT Alarm Enable */ +#define PMC_FSMR_RTCAL (0x1u << 17) /**< \brief (PMC_FSMR) RTC Alarm Enable */ +#define PMC_FSMR_USBAL (0x1u << 18) /**< \brief (PMC_FSMR) USB Alarm Enable */ +#define PMC_FSMR_LPM (0x1u << 20) /**< \brief (PMC_FSMR) Low Power Mode */ +#define PMC_FSMR_FLPM_Pos 21 +#define PMC_FSMR_FLPM_Msk (0x3u << PMC_FSMR_FLPM_Pos) /**< \brief (PMC_FSMR) Flash Low Power Mode */ +#define PMC_FSMR_FLPM_FLASH_STANDBY (0x0u << 21) /**< \brief (PMC_FSMR) Flash is in Standby mode when system enters wait mode */ +#define PMC_FSMR_FLPM_FLASH_DEEP_POWERDOWN (0x1u << 21) /**< \brief (PMC_FSMR) Flash is in deep power down mode when system enters wait mode */ +#define PMC_FSMR_FLPM_FLASH_IDLE (0x2u << 21) /**< \brief (PMC_FSMR) idle mode */ +/* -------- PMC_FSPR : (PMC Offset: 0x0074) Fast Startup Polarity Register -------- */ +#define PMC_FSPR_FSTP0 (0x1u << 0) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */ +#define PMC_FSPR_FSTP1 (0x1u << 1) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */ +#define PMC_FSPR_FSTP2 (0x1u << 2) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */ +#define PMC_FSPR_FSTP3 (0x1u << 3) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */ +#define PMC_FSPR_FSTP4 (0x1u << 4) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */ +#define PMC_FSPR_FSTP5 (0x1u << 5) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */ +#define PMC_FSPR_FSTP6 (0x1u << 6) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */ +#define PMC_FSPR_FSTP7 (0x1u << 7) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */ +#define PMC_FSPR_FSTP8 (0x1u << 8) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */ +#define PMC_FSPR_FSTP9 (0x1u << 9) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */ +#define PMC_FSPR_FSTP10 (0x1u << 10) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */ +#define PMC_FSPR_FSTP11 (0x1u << 11) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */ +#define PMC_FSPR_FSTP12 (0x1u << 12) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */ +#define PMC_FSPR_FSTP13 (0x1u << 13) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */ +#define PMC_FSPR_FSTP14 (0x1u << 14) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */ +#define PMC_FSPR_FSTP15 (0x1u << 15) /**< \brief (PMC_FSPR) Fast Startup Input Polarityx */ +/* -------- PMC_FOCR : (PMC Offset: 0x0078) Fault Output Clear Register -------- */ +#define PMC_FOCR_FOCLR (0x1u << 0) /**< \brief (PMC_FOCR) Fault Output Clear */ +/* -------- PMC_WPMR : (PMC Offset: 0x00E4) Write Protect Mode Register -------- */ +#define PMC_WPMR_WPEN (0x1u << 0) /**< \brief (PMC_WPMR) Write Protect Enable */ +#define PMC_WPMR_WPKEY_Pos 8 +#define PMC_WPMR_WPKEY_Msk (0xffffffu << PMC_WPMR_WPKEY_Pos) /**< \brief (PMC_WPMR) Write Protect KEY */ +#define PMC_WPMR_WPKEY(value) ((PMC_WPMR_WPKEY_Msk & ((value) << PMC_WPMR_WPKEY_Pos))) +/* -------- PMC_WPSR : (PMC Offset: 0x00E8) Write Protect Status Register -------- */ +#define PMC_WPSR_WPVS (0x1u << 0) /**< \brief (PMC_WPSR) Write Protect Violation Status */ +#define PMC_WPSR_WPVSRC_Pos 8 +#define PMC_WPSR_WPVSRC_Msk (0xffffu << PMC_WPSR_WPVSRC_Pos) /**< \brief (PMC_WPSR) Write Protect Violation Source */ +/* -------- PMC_PCER1 : (PMC Offset: 0x0100) Peripheral Clock Enable Register 1 -------- */ +#define PMC_PCER1_PID32 (0x1u << 0) /**< \brief (PMC_PCER1) Peripheral Clock 32 Enable */ +#define PMC_PCER1_PID33 (0x1u << 1) /**< \brief (PMC_PCER1) Peripheral Clock 33 Enable */ +#define PMC_PCER1_PID34 (0x1u << 2) /**< \brief (PMC_PCER1) Peripheral Clock 34 Enable */ +/* -------- PMC_PCDR1 : (PMC Offset: 0x0104) Peripheral Clock Disable Register 1 -------- */ +#define PMC_PCDR1_PID32 (0x1u << 0) /**< \brief (PMC_PCDR1) Peripheral Clock 32 Disable */ +#define PMC_PCDR1_PID33 (0x1u << 1) /**< \brief (PMC_PCDR1) Peripheral Clock 33 Disable */ +#define PMC_PCDR1_PID34 (0x1u << 2) /**< \brief (PMC_PCDR1) Peripheral Clock 34 Disable */ +/* -------- PMC_PCSR1 : (PMC Offset: 0x0108) Peripheral Clock Status Register 1 -------- */ +#define PMC_PCSR1_PID32 (0x1u << 0) /**< \brief (PMC_PCSR1) Peripheral Clock 32 Status */ +#define PMC_PCSR1_PID33 (0x1u << 1) /**< \brief (PMC_PCSR1) Peripheral Clock 33 Status */ +#define PMC_PCSR1_PID34 (0x1u << 2) /**< \brief (PMC_PCSR1) Peripheral Clock 34 Status */ +/* -------- PMC_OCR : (PMC Offset: 0x0110) Oscillator Calibration Register -------- */ +#define PMC_OCR_CAL4_Pos 0 +#define PMC_OCR_CAL4_Msk (0x7fu << PMC_OCR_CAL4_Pos) /**< \brief (PMC_OCR) RC Oscillator Calibration bits for 4 Mhz */ +#define PMC_OCR_CAL4(value) ((PMC_OCR_CAL4_Msk & ((value) << PMC_OCR_CAL4_Pos))) +#define PMC_OCR_SEL4 (0x1u << 7) /**< \brief (PMC_OCR) Selection of RC Oscillator Calibration bits for 4 Mhz */ +#define PMC_OCR_CAL8_Pos 8 +#define PMC_OCR_CAL8_Msk (0x7fu << PMC_OCR_CAL8_Pos) /**< \brief (PMC_OCR) RC Oscillator Calibration bits for 8 Mhz */ +#define PMC_OCR_CAL8(value) ((PMC_OCR_CAL8_Msk & ((value) << PMC_OCR_CAL8_Pos))) +#define PMC_OCR_SEL8 (0x1u << 15) /**< \brief (PMC_OCR) Selection of RC Oscillator Calibration bits for 8 Mhz */ +#define PMC_OCR_CAL12_Pos 16 +#define PMC_OCR_CAL12_Msk (0x7fu << PMC_OCR_CAL12_Pos) /**< \brief (PMC_OCR) RC Oscillator Calibration bits for 12 Mhz */ +#define PMC_OCR_CAL12(value) ((PMC_OCR_CAL12_Msk & ((value) << PMC_OCR_CAL12_Pos))) +#define PMC_OCR_SEL12 (0x1u << 23) /**< \brief (PMC_OCR) Selection of RC Oscillator Calibration bits for 12 Mhz */ + +/*@}*/ + + +#endif /* _SAM4S_PMC_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_pwm.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_pwm.h new file mode 100644 index 0000000..62ab7c4 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_pwm.h
@@ -0,0 +1,555 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_PWM_COMPONENT_ +#define _SAM4S_PWM_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Pulse Width Modulation Controller */ +/* ============================================================================= */ +/** \addtogroup SAM4S_PWM Pulse Width Modulation Controller */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief PwmCh_num hardware registers */ +typedef struct { + RwReg PWM_CMR; /**< \brief (PwmCh_num Offset: 0x0) PWM Channel Mode Register */ + RwReg PWM_CDTY; /**< \brief (PwmCh_num Offset: 0x4) PWM Channel Duty Cycle Register */ + RwReg PWM_CDTYUPD; /**< \brief (PwmCh_num Offset: 0x8) PWM Channel Duty Cycle Update Register */ + RwReg PWM_CPRD; /**< \brief (PwmCh_num Offset: 0xC) PWM Channel Period Register */ + RwReg PWM_CPRDUPD; /**< \brief (PwmCh_num Offset: 0x10) PWM Channel Period Update Register */ + RwReg PWM_CCNT; /**< \brief (PwmCh_num Offset: 0x14) PWM Channel Counter Register */ + RwReg PWM_DT; /**< \brief (PwmCh_num Offset: 0x18) PWM Channel Dead Time Register */ + RwReg PWM_DTUPD; /**< \brief (PwmCh_num Offset: 0x1C) PWM Channel Dead Time Update Register */ +} PwmCh_num; +/** \brief PwmCmp hardware registers */ +typedef struct { + RwReg PWM_CMPV; /**< \brief (PwmCmp Offset: 0x0) PWM Comparison 0 Value Register */ + RwReg PWM_CMPVUPD; /**< \brief (PwmCmp Offset: 0x4) PWM Comparison 0 Value Update Register */ + RwReg PWM_CMPM; /**< \brief (PwmCmp Offset: 0x8) PWM Comparison 0 Mode Register */ + RwReg PWM_CMPMUPD; /**< \brief (PwmCmp Offset: 0xC) PWM Comparison 0 Mode Update Register */ +} PwmCmp; +/** \brief Pwm hardware registers */ +#define PWMCMP_NUMBER 8 +#define PWMCH_NUM_NUMBER 4 +typedef struct { + RwReg PWM_CLK; /**< \brief (Pwm Offset: 0x00) PWM Clock Register */ + WoReg PWM_ENA; /**< \brief (Pwm Offset: 0x04) PWM Enable Register */ + WoReg PWM_DIS; /**< \brief (Pwm Offset: 0x08) PWM Disable Register */ + RoReg PWM_SR; /**< \brief (Pwm Offset: 0x0C) PWM Status Register */ + WoReg PWM_IER1; /**< \brief (Pwm Offset: 0x10) PWM Interrupt Enable Register 1 */ + WoReg PWM_IDR1; /**< \brief (Pwm Offset: 0x14) PWM Interrupt Disable Register 1 */ + RoReg PWM_IMR1; /**< \brief (Pwm Offset: 0x18) PWM Interrupt Mask Register 1 */ + RoReg PWM_ISR1; /**< \brief (Pwm Offset: 0x1C) PWM Interrupt Status Register 1 */ + RwReg PWM_SCM; /**< \brief (Pwm Offset: 0x20) PWM Sync Channels Mode Register */ + RoReg Reserved1[1]; + RwReg PWM_SCUC; /**< \brief (Pwm Offset: 0x28) PWM Sync Channels Update Control Register */ + RwReg PWM_SCUP; /**< \brief (Pwm Offset: 0x2C) PWM Sync Channels Update Period Register */ + WoReg PWM_SCUPUPD; /**< \brief (Pwm Offset: 0x30) PWM Sync Channels Update Period Update Register */ + WoReg PWM_IER2; /**< \brief (Pwm Offset: 0x34) PWM Interrupt Enable Register 2 */ + WoReg PWM_IDR2; /**< \brief (Pwm Offset: 0x38) PWM Interrupt Disable Register 2 */ + RoReg PWM_IMR2; /**< \brief (Pwm Offset: 0x3C) PWM Interrupt Mask Register 2 */ + RoReg PWM_ISR2; /**< \brief (Pwm Offset: 0x40) PWM Interrupt Status Register 2 */ + RwReg PWM_OOV; /**< \brief (Pwm Offset: 0x44) PWM Output Override Value Register */ + RwReg PWM_OS; /**< \brief (Pwm Offset: 0x48) PWM Output Selection Register */ + WoReg PWM_OSS; /**< \brief (Pwm Offset: 0x4C) PWM Output Selection Set Register */ + WoReg PWM_OSC; /**< \brief (Pwm Offset: 0x50) PWM Output Selection Clear Register */ + WoReg PWM_OSSUPD; /**< \brief (Pwm Offset: 0x54) PWM Output Selection Set Update Register */ + WoReg PWM_OSCUPD; /**< \brief (Pwm Offset: 0x58) PWM Output Selection Clear Update Register */ + RwReg PWM_FMR; /**< \brief (Pwm Offset: 0x5C) PWM Fault Mode Register */ + RoReg PWM_FSR; /**< \brief (Pwm Offset: 0x60) PWM Fault Status Register */ + WoReg PWM_FCR; /**< \brief (Pwm Offset: 0x64) PWM Fault Clear Register */ + RwReg PWM_FPV; /**< \brief (Pwm Offset: 0x68) PWM Fault Protection Value Register */ + RwReg PWM_FPE; /**< \brief (Pwm Offset: 0x6C) PWM Fault Protection Enable Register */ + RoReg Reserved2[3]; + RwReg PWM_ELMR[2]; /**< \brief (Pwm Offset: 0x7C) PWM Event Line 0 Mode Register */ + RoReg Reserved3[11]; + RwReg PWM_SMMR; /**< \brief (Pwm Offset: 0xB0) PWM Stepper Motor Mode Register */ + RoReg Reserved4[12]; + WoReg PWM_WPCR; /**< \brief (Pwm Offset: 0xE4) PWM Write Protect Control Register */ + RoReg PWM_WPSR; /**< \brief (Pwm Offset: 0xE8) PWM Write Protect Status Register */ + RoReg Reserved5[7]; + RwReg PWM_TPR; /**< \brief (Pwm Offset: 0x108) Transmit Pointer Register */ + RwReg PWM_TCR; /**< \brief (Pwm Offset: 0x10C) Transmit Counter Register */ + RoReg Reserved6[2]; + RwReg PWM_TNPR; /**< \brief (Pwm Offset: 0x118) Transmit Next Pointer Register */ + RwReg PWM_TNCR; /**< \brief (Pwm Offset: 0x11C) Transmit Next Counter Register */ + WoReg PWM_PTCR; /**< \brief (Pwm Offset: 0x120) Transfer Control Register */ + RoReg PWM_PTSR; /**< \brief (Pwm Offset: 0x124) Transfer Status Register */ + RoReg Reserved7[2]; + PwmCmp PWM_CMP[PWMCMP_NUMBER]; /**< \brief (Pwm Offset: 0x130) 0 .. 7 */ + RoReg Reserved8[20]; + PwmCh_num PWM_CH_NUM[PWMCH_NUM_NUMBER]; /**< \brief (Pwm Offset: 0x200) ch_num = 0 .. 3 */ +} Pwm; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- PWM_CLK : (PWM Offset: 0x00) PWM Clock Register -------- */ +#define PWM_CLK_DIVA_Pos 0 +#define PWM_CLK_DIVA_Msk (0xffu << PWM_CLK_DIVA_Pos) /**< \brief (PWM_CLK) CLKA, CLKB Divide Factor */ +#define PWM_CLK_DIVA(value) ((PWM_CLK_DIVA_Msk & ((value) << PWM_CLK_DIVA_Pos))) +#define PWM_CLK_PREA_Pos 8 +#define PWM_CLK_PREA_Msk (0xfu << PWM_CLK_PREA_Pos) /**< \brief (PWM_CLK) CLKA, CLKB Source Clock Selection */ +#define PWM_CLK_PREA(value) ((PWM_CLK_PREA_Msk & ((value) << PWM_CLK_PREA_Pos))) +#define PWM_CLK_DIVB_Pos 16 +#define PWM_CLK_DIVB_Msk (0xffu << PWM_CLK_DIVB_Pos) /**< \brief (PWM_CLK) CLKA, CLKB Divide Factor */ +#define PWM_CLK_DIVB(value) ((PWM_CLK_DIVB_Msk & ((value) << PWM_CLK_DIVB_Pos))) +#define PWM_CLK_PREB_Pos 24 +#define PWM_CLK_PREB_Msk (0xfu << PWM_CLK_PREB_Pos) /**< \brief (PWM_CLK) CLKA, CLKB Source Clock Selection */ +#define PWM_CLK_PREB(value) ((PWM_CLK_PREB_Msk & ((value) << PWM_CLK_PREB_Pos))) +/* -------- PWM_ENA : (PWM Offset: 0x04) PWM Enable Register -------- */ +#define PWM_ENA_CHID0 (0x1u << 0) /**< \brief (PWM_ENA) Channel ID */ +#define PWM_ENA_CHID1 (0x1u << 1) /**< \brief (PWM_ENA) Channel ID */ +#define PWM_ENA_CHID2 (0x1u << 2) /**< \brief (PWM_ENA) Channel ID */ +#define PWM_ENA_CHID3 (0x1u << 3) /**< \brief (PWM_ENA) Channel ID */ +/* -------- PWM_DIS : (PWM Offset: 0x08) PWM Disable Register -------- */ +#define PWM_DIS_CHID0 (0x1u << 0) /**< \brief (PWM_DIS) Channel ID */ +#define PWM_DIS_CHID1 (0x1u << 1) /**< \brief (PWM_DIS) Channel ID */ +#define PWM_DIS_CHID2 (0x1u << 2) /**< \brief (PWM_DIS) Channel ID */ +#define PWM_DIS_CHID3 (0x1u << 3) /**< \brief (PWM_DIS) Channel ID */ +/* -------- PWM_SR : (PWM Offset: 0x0C) PWM Status Register -------- */ +#define PWM_SR_CHID0 (0x1u << 0) /**< \brief (PWM_SR) Channel ID */ +#define PWM_SR_CHID1 (0x1u << 1) /**< \brief (PWM_SR) Channel ID */ +#define PWM_SR_CHID2 (0x1u << 2) /**< \brief (PWM_SR) Channel ID */ +#define PWM_SR_CHID3 (0x1u << 3) /**< \brief (PWM_SR) Channel ID */ +/* -------- PWM_IER1 : (PWM Offset: 0x10) PWM Interrupt Enable Register 1 -------- */ +#define PWM_IER1_CHID0 (0x1u << 0) /**< \brief (PWM_IER1) Counter Event on Channel 0 Interrupt Enable */ +#define PWM_IER1_CHID1 (0x1u << 1) /**< \brief (PWM_IER1) Counter Event on Channel 1 Interrupt Enable */ +#define PWM_IER1_CHID2 (0x1u << 2) /**< \brief (PWM_IER1) Counter Event on Channel 2 Interrupt Enable */ +#define PWM_IER1_CHID3 (0x1u << 3) /**< \brief (PWM_IER1) Counter Event on Channel 3 Interrupt Enable */ +#define PWM_IER1_FCHID0 (0x1u << 16) /**< \brief (PWM_IER1) Fault Protection Trigger on Channel 0 Interrupt Enable */ +#define PWM_IER1_FCHID1 (0x1u << 17) /**< \brief (PWM_IER1) Fault Protection Trigger on Channel 1 Interrupt Enable */ +#define PWM_IER1_FCHID2 (0x1u << 18) /**< \brief (PWM_IER1) Fault Protection Trigger on Channel 2 Interrupt Enable */ +#define PWM_IER1_FCHID3 (0x1u << 19) /**< \brief (PWM_IER1) Fault Protection Trigger on Channel 3 Interrupt Enable */ +/* -------- PWM_IDR1 : (PWM Offset: 0x14) PWM Interrupt Disable Register 1 -------- */ +#define PWM_IDR1_CHID0 (0x1u << 0) /**< \brief (PWM_IDR1) Counter Event on Channel 0 Interrupt Disable */ +#define PWM_IDR1_CHID1 (0x1u << 1) /**< \brief (PWM_IDR1) Counter Event on Channel 1 Interrupt Disable */ +#define PWM_IDR1_CHID2 (0x1u << 2) /**< \brief (PWM_IDR1) Counter Event on Channel 2 Interrupt Disable */ +#define PWM_IDR1_CHID3 (0x1u << 3) /**< \brief (PWM_IDR1) Counter Event on Channel 3 Interrupt Disable */ +#define PWM_IDR1_FCHID0 (0x1u << 16) /**< \brief (PWM_IDR1) Fault Protection Trigger on Channel 0 Interrupt Disable */ +#define PWM_IDR1_FCHID1 (0x1u << 17) /**< \brief (PWM_IDR1) Fault Protection Trigger on Channel 1 Interrupt Disable */ +#define PWM_IDR1_FCHID2 (0x1u << 18) /**< \brief (PWM_IDR1) Fault Protection Trigger on Channel 2 Interrupt Disable */ +#define PWM_IDR1_FCHID3 (0x1u << 19) /**< \brief (PWM_IDR1) Fault Protection Trigger on Channel 3 Interrupt Disable */ +/* -------- PWM_IMR1 : (PWM Offset: 0x18) PWM Interrupt Mask Register 1 -------- */ +#define PWM_IMR1_CHID0 (0x1u << 0) /**< \brief (PWM_IMR1) Counter Event on Channel 0 Interrupt Mask */ +#define PWM_IMR1_CHID1 (0x1u << 1) /**< \brief (PWM_IMR1) Counter Event on Channel 1 Interrupt Mask */ +#define PWM_IMR1_CHID2 (0x1u << 2) /**< \brief (PWM_IMR1) Counter Event on Channel 2 Interrupt Mask */ +#define PWM_IMR1_CHID3 (0x1u << 3) /**< \brief (PWM_IMR1) Counter Event on Channel 3 Interrupt Mask */ +#define PWM_IMR1_FCHID0 (0x1u << 16) /**< \brief (PWM_IMR1) Fault Protection Trigger on Channel 0 Interrupt Mask */ +#define PWM_IMR1_FCHID1 (0x1u << 17) /**< \brief (PWM_IMR1) Fault Protection Trigger on Channel 1 Interrupt Mask */ +#define PWM_IMR1_FCHID2 (0x1u << 18) /**< \brief (PWM_IMR1) Fault Protection Trigger on Channel 2 Interrupt Mask */ +#define PWM_IMR1_FCHID3 (0x1u << 19) /**< \brief (PWM_IMR1) Fault Protection Trigger on Channel 3 Interrupt Mask */ +/* -------- PWM_ISR1 : (PWM Offset: 0x1C) PWM Interrupt Status Register 1 -------- */ +#define PWM_ISR1_CHID0 (0x1u << 0) /**< \brief (PWM_ISR1) Counter Event on Channel 0 */ +#define PWM_ISR1_CHID1 (0x1u << 1) /**< \brief (PWM_ISR1) Counter Event on Channel 1 */ +#define PWM_ISR1_CHID2 (0x1u << 2) /**< \brief (PWM_ISR1) Counter Event on Channel 2 */ +#define PWM_ISR1_CHID3 (0x1u << 3) /**< \brief (PWM_ISR1) Counter Event on Channel 3 */ +#define PWM_ISR1_FCHID0 (0x1u << 16) /**< \brief (PWM_ISR1) Fault Protection Trigger on Channel 0 */ +#define PWM_ISR1_FCHID1 (0x1u << 17) /**< \brief (PWM_ISR1) Fault Protection Trigger on Channel 1 */ +#define PWM_ISR1_FCHID2 (0x1u << 18) /**< \brief (PWM_ISR1) Fault Protection Trigger on Channel 2 */ +#define PWM_ISR1_FCHID3 (0x1u << 19) /**< \brief (PWM_ISR1) Fault Protection Trigger on Channel 3 */ +/* -------- PWM_SCM : (PWM Offset: 0x20) PWM Sync Channels Mode Register -------- */ +#define PWM_SCM_SYNC0 (0x1u << 0) /**< \brief (PWM_SCM) Synchronous Channel 0 */ +#define PWM_SCM_SYNC1 (0x1u << 1) /**< \brief (PWM_SCM) Synchronous Channel 1 */ +#define PWM_SCM_SYNC2 (0x1u << 2) /**< \brief (PWM_SCM) Synchronous Channel 2 */ +#define PWM_SCM_SYNC3 (0x1u << 3) /**< \brief (PWM_SCM) Synchronous Channel 3 */ +#define PWM_SCM_UPDM_Pos 16 +#define PWM_SCM_UPDM_Msk (0x3u << PWM_SCM_UPDM_Pos) /**< \brief (PWM_SCM) Synchronous Channels Update Mode */ +#define PWM_SCM_UPDM_MODE0 (0x0u << 16) /**< \brief (PWM_SCM) Manual write of double buffer registers and manual update of synchronous channels */ +#define PWM_SCM_UPDM_MODE1 (0x1u << 16) /**< \brief (PWM_SCM) Manual write of double buffer registers and automatic update of synchronous channels */ +#define PWM_SCM_UPDM_MODE2 (0x2u << 16) /**< \brief (PWM_SCM) Automatic write of duty-cycle update registers by the PDC and automatic update of synchronous channels */ +#define PWM_SCM_PTRM (0x1u << 20) /**< \brief (PWM_SCM) PDC Transfer Request Mode */ +#define PWM_SCM_PTRCS_Pos 21 +#define PWM_SCM_PTRCS_Msk (0x7u << PWM_SCM_PTRCS_Pos) /**< \brief (PWM_SCM) PDC Transfer Request Comparison Selection */ +#define PWM_SCM_PTRCS(value) ((PWM_SCM_PTRCS_Msk & ((value) << PWM_SCM_PTRCS_Pos))) +/* -------- PWM_SCUC : (PWM Offset: 0x28) PWM Sync Channels Update Control Register -------- */ +#define PWM_SCUC_UPDULOCK (0x1u << 0) /**< \brief (PWM_SCUC) Synchronous Channels Update Unlock */ +/* -------- PWM_SCUP : (PWM Offset: 0x2C) PWM Sync Channels Update Period Register -------- */ +#define PWM_SCUP_UPR_Pos 0 +#define PWM_SCUP_UPR_Msk (0xfu << PWM_SCUP_UPR_Pos) /**< \brief (PWM_SCUP) Update Period */ +#define PWM_SCUP_UPR(value) ((PWM_SCUP_UPR_Msk & ((value) << PWM_SCUP_UPR_Pos))) +#define PWM_SCUP_UPRCNT_Pos 4 +#define PWM_SCUP_UPRCNT_Msk (0xfu << PWM_SCUP_UPRCNT_Pos) /**< \brief (PWM_SCUP) Update Period Counter */ +#define PWM_SCUP_UPRCNT(value) ((PWM_SCUP_UPRCNT_Msk & ((value) << PWM_SCUP_UPRCNT_Pos))) +/* -------- PWM_SCUPUPD : (PWM Offset: 0x30) PWM Sync Channels Update Period Update Register -------- */ +#define PWM_SCUPUPD_UPRUPD_Pos 0 +#define PWM_SCUPUPD_UPRUPD_Msk (0xfu << PWM_SCUPUPD_UPRUPD_Pos) /**< \brief (PWM_SCUPUPD) Update Period Update */ +#define PWM_SCUPUPD_UPRUPD(value) ((PWM_SCUPUPD_UPRUPD_Msk & ((value) << PWM_SCUPUPD_UPRUPD_Pos))) +/* -------- PWM_IER2 : (PWM Offset: 0x34) PWM Interrupt Enable Register 2 -------- */ +#define PWM_IER2_WRDY (0x1u << 0) /**< \brief (PWM_IER2) Write Ready for Synchronous Channels Update Interrupt Enable */ +#define PWM_IER2_ENDTX (0x1u << 1) /**< \brief (PWM_IER2) PDC End of TX Buffer Interrupt Enable */ +#define PWM_IER2_TXBUFE (0x1u << 2) /**< \brief (PWM_IER2) PDC TX Buffer Empty Interrupt Enable */ +#define PWM_IER2_UNRE (0x1u << 3) /**< \brief (PWM_IER2) Synchronous Channels Update Underrun Error Interrupt Enable */ +#define PWM_IER2_CMPM0 (0x1u << 8) /**< \brief (PWM_IER2) Comparison 0 Match Interrupt Enable */ +#define PWM_IER2_CMPM1 (0x1u << 9) /**< \brief (PWM_IER2) Comparison 1 Match Interrupt Enable */ +#define PWM_IER2_CMPM2 (0x1u << 10) /**< \brief (PWM_IER2) Comparison 2 Match Interrupt Enable */ +#define PWM_IER2_CMPM3 (0x1u << 11) /**< \brief (PWM_IER2) Comparison 3 Match Interrupt Enable */ +#define PWM_IER2_CMPM4 (0x1u << 12) /**< \brief (PWM_IER2) Comparison 4 Match Interrupt Enable */ +#define PWM_IER2_CMPM5 (0x1u << 13) /**< \brief (PWM_IER2) Comparison 5 Match Interrupt Enable */ +#define PWM_IER2_CMPM6 (0x1u << 14) /**< \brief (PWM_IER2) Comparison 6 Match Interrupt Enable */ +#define PWM_IER2_CMPM7 (0x1u << 15) /**< \brief (PWM_IER2) Comparison 7 Match Interrupt Enable */ +#define PWM_IER2_CMPU0 (0x1u << 16) /**< \brief (PWM_IER2) Comparison 0 Update Interrupt Enable */ +#define PWM_IER2_CMPU1 (0x1u << 17) /**< \brief (PWM_IER2) Comparison 1 Update Interrupt Enable */ +#define PWM_IER2_CMPU2 (0x1u << 18) /**< \brief (PWM_IER2) Comparison 2 Update Interrupt Enable */ +#define PWM_IER2_CMPU3 (0x1u << 19) /**< \brief (PWM_IER2) Comparison 3 Update Interrupt Enable */ +#define PWM_IER2_CMPU4 (0x1u << 20) /**< \brief (PWM_IER2) Comparison 4 Update Interrupt Enable */ +#define PWM_IER2_CMPU5 (0x1u << 21) /**< \brief (PWM_IER2) Comparison 5 Update Interrupt Enable */ +#define PWM_IER2_CMPU6 (0x1u << 22) /**< \brief (PWM_IER2) Comparison 6 Update Interrupt Enable */ +#define PWM_IER2_CMPU7 (0x1u << 23) /**< \brief (PWM_IER2) Comparison 7 Update Interrupt Enable */ +/* -------- PWM_IDR2 : (PWM Offset: 0x38) PWM Interrupt Disable Register 2 -------- */ +#define PWM_IDR2_WRDY (0x1u << 0) /**< \brief (PWM_IDR2) Write Ready for Synchronous Channels Update Interrupt Disable */ +#define PWM_IDR2_ENDTX (0x1u << 1) /**< \brief (PWM_IDR2) PDC End of TX Buffer Interrupt Disable */ +#define PWM_IDR2_TXBUFE (0x1u << 2) /**< \brief (PWM_IDR2) PDC TX Buffer Empty Interrupt Disable */ +#define PWM_IDR2_UNRE (0x1u << 3) /**< \brief (PWM_IDR2) Synchronous Channels Update Underrun Error Interrupt Disable */ +#define PWM_IDR2_CMPM0 (0x1u << 8) /**< \brief (PWM_IDR2) Comparison 0 Match Interrupt Disable */ +#define PWM_IDR2_CMPM1 (0x1u << 9) /**< \brief (PWM_IDR2) Comparison 1 Match Interrupt Disable */ +#define PWM_IDR2_CMPM2 (0x1u << 10) /**< \brief (PWM_IDR2) Comparison 2 Match Interrupt Disable */ +#define PWM_IDR2_CMPM3 (0x1u << 11) /**< \brief (PWM_IDR2) Comparison 3 Match Interrupt Disable */ +#define PWM_IDR2_CMPM4 (0x1u << 12) /**< \brief (PWM_IDR2) Comparison 4 Match Interrupt Disable */ +#define PWM_IDR2_CMPM5 (0x1u << 13) /**< \brief (PWM_IDR2) Comparison 5 Match Interrupt Disable */ +#define PWM_IDR2_CMPM6 (0x1u << 14) /**< \brief (PWM_IDR2) Comparison 6 Match Interrupt Disable */ +#define PWM_IDR2_CMPM7 (0x1u << 15) /**< \brief (PWM_IDR2) Comparison 7 Match Interrupt Disable */ +#define PWM_IDR2_CMPU0 (0x1u << 16) /**< \brief (PWM_IDR2) Comparison 0 Update Interrupt Disable */ +#define PWM_IDR2_CMPU1 (0x1u << 17) /**< \brief (PWM_IDR2) Comparison 1 Update Interrupt Disable */ +#define PWM_IDR2_CMPU2 (0x1u << 18) /**< \brief (PWM_IDR2) Comparison 2 Update Interrupt Disable */ +#define PWM_IDR2_CMPU3 (0x1u << 19) /**< \brief (PWM_IDR2) Comparison 3 Update Interrupt Disable */ +#define PWM_IDR2_CMPU4 (0x1u << 20) /**< \brief (PWM_IDR2) Comparison 4 Update Interrupt Disable */ +#define PWM_IDR2_CMPU5 (0x1u << 21) /**< \brief (PWM_IDR2) Comparison 5 Update Interrupt Disable */ +#define PWM_IDR2_CMPU6 (0x1u << 22) /**< \brief (PWM_IDR2) Comparison 6 Update Interrupt Disable */ +#define PWM_IDR2_CMPU7 (0x1u << 23) /**< \brief (PWM_IDR2) Comparison 7 Update Interrupt Disable */ +/* -------- PWM_IMR2 : (PWM Offset: 0x3C) PWM Interrupt Mask Register 2 -------- */ +#define PWM_IMR2_WRDY (0x1u << 0) /**< \brief (PWM_IMR2) Write Ready for Synchronous Channels Update Interrupt Mask */ +#define PWM_IMR2_ENDTX (0x1u << 1) /**< \brief (PWM_IMR2) PDC End of TX Buffer Interrupt Mask */ +#define PWM_IMR2_TXBUFE (0x1u << 2) /**< \brief (PWM_IMR2) PDC TX Buffer Empty Interrupt Mask */ +#define PWM_IMR2_UNRE (0x1u << 3) /**< \brief (PWM_IMR2) Synchronous Channels Update Underrun Error Interrupt Mask */ +#define PWM_IMR2_CMPM0 (0x1u << 8) /**< \brief (PWM_IMR2) Comparison 0 Match Interrupt Mask */ +#define PWM_IMR2_CMPM1 (0x1u << 9) /**< \brief (PWM_IMR2) Comparison 1 Match Interrupt Mask */ +#define PWM_IMR2_CMPM2 (0x1u << 10) /**< \brief (PWM_IMR2) Comparison 2 Match Interrupt Mask */ +#define PWM_IMR2_CMPM3 (0x1u << 11) /**< \brief (PWM_IMR2) Comparison 3 Match Interrupt Mask */ +#define PWM_IMR2_CMPM4 (0x1u << 12) /**< \brief (PWM_IMR2) Comparison 4 Match Interrupt Mask */ +#define PWM_IMR2_CMPM5 (0x1u << 13) /**< \brief (PWM_IMR2) Comparison 5 Match Interrupt Mask */ +#define PWM_IMR2_CMPM6 (0x1u << 14) /**< \brief (PWM_IMR2) Comparison 6 Match Interrupt Mask */ +#define PWM_IMR2_CMPM7 (0x1u << 15) /**< \brief (PWM_IMR2) Comparison 7 Match Interrupt Mask */ +#define PWM_IMR2_CMPU0 (0x1u << 16) /**< \brief (PWM_IMR2) Comparison 0 Update Interrupt Mask */ +#define PWM_IMR2_CMPU1 (0x1u << 17) /**< \brief (PWM_IMR2) Comparison 1 Update Interrupt Mask */ +#define PWM_IMR2_CMPU2 (0x1u << 18) /**< \brief (PWM_IMR2) Comparison 2 Update Interrupt Mask */ +#define PWM_IMR2_CMPU3 (0x1u << 19) /**< \brief (PWM_IMR2) Comparison 3 Update Interrupt Mask */ +#define PWM_IMR2_CMPU4 (0x1u << 20) /**< \brief (PWM_IMR2) Comparison 4 Update Interrupt Mask */ +#define PWM_IMR2_CMPU5 (0x1u << 21) /**< \brief (PWM_IMR2) Comparison 5 Update Interrupt Mask */ +#define PWM_IMR2_CMPU6 (0x1u << 22) /**< \brief (PWM_IMR2) Comparison 6 Update Interrupt Mask */ +#define PWM_IMR2_CMPU7 (0x1u << 23) /**< \brief (PWM_IMR2) Comparison 7 Update Interrupt Mask */ +/* -------- PWM_ISR2 : (PWM Offset: 0x40) PWM Interrupt Status Register 2 -------- */ +#define PWM_ISR2_WRDY (0x1u << 0) /**< \brief (PWM_ISR2) Write Ready for Synchronous Channels Update */ +#define PWM_ISR2_ENDTX (0x1u << 1) /**< \brief (PWM_ISR2) PDC End of TX Buffer */ +#define PWM_ISR2_TXBUFE (0x1u << 2) /**< \brief (PWM_ISR2) PDC TX Buffer Empty */ +#define PWM_ISR2_UNRE (0x1u << 3) /**< \brief (PWM_ISR2) Synchronous Channels Update Underrun Error */ +#define PWM_ISR2_CMPM0 (0x1u << 8) /**< \brief (PWM_ISR2) Comparison 0 Match */ +#define PWM_ISR2_CMPM1 (0x1u << 9) /**< \brief (PWM_ISR2) Comparison 1 Match */ +#define PWM_ISR2_CMPM2 (0x1u << 10) /**< \brief (PWM_ISR2) Comparison 2 Match */ +#define PWM_ISR2_CMPM3 (0x1u << 11) /**< \brief (PWM_ISR2) Comparison 3 Match */ +#define PWM_ISR2_CMPM4 (0x1u << 12) /**< \brief (PWM_ISR2) Comparison 4 Match */ +#define PWM_ISR2_CMPM5 (0x1u << 13) /**< \brief (PWM_ISR2) Comparison 5 Match */ +#define PWM_ISR2_CMPM6 (0x1u << 14) /**< \brief (PWM_ISR2) Comparison 6 Match */ +#define PWM_ISR2_CMPM7 (0x1u << 15) /**< \brief (PWM_ISR2) Comparison 7 Match */ +#define PWM_ISR2_CMPU0 (0x1u << 16) /**< \brief (PWM_ISR2) Comparison 0 Update */ +#define PWM_ISR2_CMPU1 (0x1u << 17) /**< \brief (PWM_ISR2) Comparison 1 Update */ +#define PWM_ISR2_CMPU2 (0x1u << 18) /**< \brief (PWM_ISR2) Comparison 2 Update */ +#define PWM_ISR2_CMPU3 (0x1u << 19) /**< \brief (PWM_ISR2) Comparison 3 Update */ +#define PWM_ISR2_CMPU4 (0x1u << 20) /**< \brief (PWM_ISR2) Comparison 4 Update */ +#define PWM_ISR2_CMPU5 (0x1u << 21) /**< \brief (PWM_ISR2) Comparison 5 Update */ +#define PWM_ISR2_CMPU6 (0x1u << 22) /**< \brief (PWM_ISR2) Comparison 6 Update */ +#define PWM_ISR2_CMPU7 (0x1u << 23) /**< \brief (PWM_ISR2) Comparison 7 Update */ +/* -------- PWM_OOV : (PWM Offset: 0x44) PWM Output Override Value Register -------- */ +#define PWM_OOV_OOVH0 (0x1u << 0) /**< \brief (PWM_OOV) Output Override Value for PWMH output of the channel 0 */ +#define PWM_OOV_OOVH1 (0x1u << 1) /**< \brief (PWM_OOV) Output Override Value for PWMH output of the channel 1 */ +#define PWM_OOV_OOVH2 (0x1u << 2) /**< \brief (PWM_OOV) Output Override Value for PWMH output of the channel 2 */ +#define PWM_OOV_OOVH3 (0x1u << 3) /**< \brief (PWM_OOV) Output Override Value for PWMH output of the channel 3 */ +#define PWM_OOV_OOVL0 (0x1u << 16) /**< \brief (PWM_OOV) Output Override Value for PWML output of the channel 0 */ +#define PWM_OOV_OOVL1 (0x1u << 17) /**< \brief (PWM_OOV) Output Override Value for PWML output of the channel 1 */ +#define PWM_OOV_OOVL2 (0x1u << 18) /**< \brief (PWM_OOV) Output Override Value for PWML output of the channel 2 */ +#define PWM_OOV_OOVL3 (0x1u << 19) /**< \brief (PWM_OOV) Output Override Value for PWML output of the channel 3 */ +/* -------- PWM_OS : (PWM Offset: 0x48) PWM Output Selection Register -------- */ +#define PWM_OS_OSH0 (0x1u << 0) /**< \brief (PWM_OS) Output Selection for PWMH output of the channel 0 */ +#define PWM_OS_OSH1 (0x1u << 1) /**< \brief (PWM_OS) Output Selection for PWMH output of the channel 1 */ +#define PWM_OS_OSH2 (0x1u << 2) /**< \brief (PWM_OS) Output Selection for PWMH output of the channel 2 */ +#define PWM_OS_OSH3 (0x1u << 3) /**< \brief (PWM_OS) Output Selection for PWMH output of the channel 3 */ +#define PWM_OS_OSL0 (0x1u << 16) /**< \brief (PWM_OS) Output Selection for PWML output of the channel 0 */ +#define PWM_OS_OSL1 (0x1u << 17) /**< \brief (PWM_OS) Output Selection for PWML output of the channel 1 */ +#define PWM_OS_OSL2 (0x1u << 18) /**< \brief (PWM_OS) Output Selection for PWML output of the channel 2 */ +#define PWM_OS_OSL3 (0x1u << 19) /**< \brief (PWM_OS) Output Selection for PWML output of the channel 3 */ +/* -------- PWM_OSS : (PWM Offset: 0x4C) PWM Output Selection Set Register -------- */ +#define PWM_OSS_OSSH0 (0x1u << 0) /**< \brief (PWM_OSS) Output Selection Set for PWMH output of the channel 0 */ +#define PWM_OSS_OSSH1 (0x1u << 1) /**< \brief (PWM_OSS) Output Selection Set for PWMH output of the channel 1 */ +#define PWM_OSS_OSSH2 (0x1u << 2) /**< \brief (PWM_OSS) Output Selection Set for PWMH output of the channel 2 */ +#define PWM_OSS_OSSH3 (0x1u << 3) /**< \brief (PWM_OSS) Output Selection Set for PWMH output of the channel 3 */ +#define PWM_OSS_OSSL0 (0x1u << 16) /**< \brief (PWM_OSS) Output Selection Set for PWML output of the channel 0 */ +#define PWM_OSS_OSSL1 (0x1u << 17) /**< \brief (PWM_OSS) Output Selection Set for PWML output of the channel 1 */ +#define PWM_OSS_OSSL2 (0x1u << 18) /**< \brief (PWM_OSS) Output Selection Set for PWML output of the channel 2 */ +#define PWM_OSS_OSSL3 (0x1u << 19) /**< \brief (PWM_OSS) Output Selection Set for PWML output of the channel 3 */ +/* -------- PWM_OSC : (PWM Offset: 0x50) PWM Output Selection Clear Register -------- */ +#define PWM_OSC_OSCH0 (0x1u << 0) /**< \brief (PWM_OSC) Output Selection Clear for PWMH output of the channel 0 */ +#define PWM_OSC_OSCH1 (0x1u << 1) /**< \brief (PWM_OSC) Output Selection Clear for PWMH output of the channel 1 */ +#define PWM_OSC_OSCH2 (0x1u << 2) /**< \brief (PWM_OSC) Output Selection Clear for PWMH output of the channel 2 */ +#define PWM_OSC_OSCH3 (0x1u << 3) /**< \brief (PWM_OSC) Output Selection Clear for PWMH output of the channel 3 */ +#define PWM_OSC_OSCL0 (0x1u << 16) /**< \brief (PWM_OSC) Output Selection Clear for PWML output of the channel 0 */ +#define PWM_OSC_OSCL1 (0x1u << 17) /**< \brief (PWM_OSC) Output Selection Clear for PWML output of the channel 1 */ +#define PWM_OSC_OSCL2 (0x1u << 18) /**< \brief (PWM_OSC) Output Selection Clear for PWML output of the channel 2 */ +#define PWM_OSC_OSCL3 (0x1u << 19) /**< \brief (PWM_OSC) Output Selection Clear for PWML output of the channel 3 */ +/* -------- PWM_OSSUPD : (PWM Offset: 0x54) PWM Output Selection Set Update Register -------- */ +#define PWM_OSSUPD_OSSUPH0 (0x1u << 0) /**< \brief (PWM_OSSUPD) Output Selection Set for PWMH output of the channel 0 */ +#define PWM_OSSUPD_OSSUPH1 (0x1u << 1) /**< \brief (PWM_OSSUPD) Output Selection Set for PWMH output of the channel 1 */ +#define PWM_OSSUPD_OSSUPH2 (0x1u << 2) /**< \brief (PWM_OSSUPD) Output Selection Set for PWMH output of the channel 2 */ +#define PWM_OSSUPD_OSSUPH3 (0x1u << 3) /**< \brief (PWM_OSSUPD) Output Selection Set for PWMH output of the channel 3 */ +#define PWM_OSSUPD_OSSUPL0 (0x1u << 16) /**< \brief (PWM_OSSUPD) Output Selection Set for PWML output of the channel 0 */ +#define PWM_OSSUPD_OSSUPL1 (0x1u << 17) /**< \brief (PWM_OSSUPD) Output Selection Set for PWML output of the channel 1 */ +#define PWM_OSSUPD_OSSUPL2 (0x1u << 18) /**< \brief (PWM_OSSUPD) Output Selection Set for PWML output of the channel 2 */ +#define PWM_OSSUPD_OSSUPL3 (0x1u << 19) /**< \brief (PWM_OSSUPD) Output Selection Set for PWML output of the channel 3 */ +/* -------- PWM_OSCUPD : (PWM Offset: 0x58) PWM Output Selection Clear Update Register -------- */ +#define PWM_OSCUPD_OSCUPH0 (0x1u << 0) /**< \brief (PWM_OSCUPD) Output Selection Clear for PWMH output of the channel 0 */ +#define PWM_OSCUPD_OSCUPH1 (0x1u << 1) /**< \brief (PWM_OSCUPD) Output Selection Clear for PWMH output of the channel 1 */ +#define PWM_OSCUPD_OSCUPH2 (0x1u << 2) /**< \brief (PWM_OSCUPD) Output Selection Clear for PWMH output of the channel 2 */ +#define PWM_OSCUPD_OSCUPH3 (0x1u << 3) /**< \brief (PWM_OSCUPD) Output Selection Clear for PWMH output of the channel 3 */ +#define PWM_OSCUPD_OSCUPL0 (0x1u << 16) /**< \brief (PWM_OSCUPD) Output Selection Clear for PWML output of the channel 0 */ +#define PWM_OSCUPD_OSCUPL1 (0x1u << 17) /**< \brief (PWM_OSCUPD) Output Selection Clear for PWML output of the channel 1 */ +#define PWM_OSCUPD_OSCUPL2 (0x1u << 18) /**< \brief (PWM_OSCUPD) Output Selection Clear for PWML output of the channel 2 */ +#define PWM_OSCUPD_OSCUPL3 (0x1u << 19) /**< \brief (PWM_OSCUPD) Output Selection Clear for PWML output of the channel 3 */ +/* -------- PWM_FMR : (PWM Offset: 0x5C) PWM Fault Mode Register -------- */ +#define PWM_FMR_FPOL_Pos 0 +#define PWM_FMR_FPOL_Msk (0xffu << PWM_FMR_FPOL_Pos) /**< \brief (PWM_FMR) Fault Polarity (fault input bit varies from 0 to 5) */ +#define PWM_FMR_FPOL(value) ((PWM_FMR_FPOL_Msk & ((value) << PWM_FMR_FPOL_Pos))) +#define PWM_FMR_FMOD_Pos 8 +#define PWM_FMR_FMOD_Msk (0xffu << PWM_FMR_FMOD_Pos) /**< \brief (PWM_FMR) Fault Activation Mode (fault input bit varies from 0 to 5) */ +#define PWM_FMR_FMOD(value) ((PWM_FMR_FMOD_Msk & ((value) << PWM_FMR_FMOD_Pos))) +#define PWM_FMR_FFIL_Pos 16 +#define PWM_FMR_FFIL_Msk (0xffu << PWM_FMR_FFIL_Pos) /**< \brief (PWM_FMR) Fault Filtering (fault input bit varies from 0 to 5) */ +#define PWM_FMR_FFIL(value) ((PWM_FMR_FFIL_Msk & ((value) << PWM_FMR_FFIL_Pos))) +/* -------- PWM_FSR : (PWM Offset: 0x60) PWM Fault Status Register -------- */ +#define PWM_FSR_FIV_Pos 0 +#define PWM_FSR_FIV_Msk (0xffu << PWM_FSR_FIV_Pos) /**< \brief (PWM_FSR) Fault Input Value (fault input bit varies from 0 to 5) */ +#define PWM_FSR_FS_Pos 8 +#define PWM_FSR_FS_Msk (0xffu << PWM_FSR_FS_Pos) /**< \brief (PWM_FSR) Fault Status (fault input bit varies from 0 to 5) */ +/* -------- PWM_FCR : (PWM Offset: 0x64) PWM Fault Clear Register -------- */ +#define PWM_FCR_FCLR_Pos 0 +#define PWM_FCR_FCLR_Msk (0xffu << PWM_FCR_FCLR_Pos) /**< \brief (PWM_FCR) Fault Clear (fault input bit varies from 0 to 5) */ +#define PWM_FCR_FCLR(value) ((PWM_FCR_FCLR_Msk & ((value) << PWM_FCR_FCLR_Pos))) +/* -------- PWM_FPV : (PWM Offset: 0x68) PWM Fault Protection Value Register -------- */ +#define PWM_FPV_FPVH0 (0x1u << 0) /**< \brief (PWM_FPV) Fault Protection Value for PWMH output on channel 0 */ +#define PWM_FPV_FPVH1 (0x1u << 1) /**< \brief (PWM_FPV) Fault Protection Value for PWMH output on channel 1 */ +#define PWM_FPV_FPVH2 (0x1u << 2) /**< \brief (PWM_FPV) Fault Protection Value for PWMH output on channel 2 */ +#define PWM_FPV_FPVH3 (0x1u << 3) /**< \brief (PWM_FPV) Fault Protection Value for PWMH output on channel 3 */ +#define PWM_FPV_FPVL0 (0x1u << 16) /**< \brief (PWM_FPV) Fault Protection Value for PWML output on channel 0 */ +#define PWM_FPV_FPVL1 (0x1u << 17) /**< \brief (PWM_FPV) Fault Protection Value for PWML output on channel 1 */ +#define PWM_FPV_FPVL2 (0x1u << 18) /**< \brief (PWM_FPV) Fault Protection Value for PWML output on channel 2 */ +#define PWM_FPV_FPVL3 (0x1u << 19) /**< \brief (PWM_FPV) Fault Protection Value for PWML output on channel 3 */ +/* -------- PWM_FPE : (PWM Offset: 0x6C) PWM Fault Protection Enable Register -------- */ +#define PWM_FPE_FPE0_Pos 0 +#define PWM_FPE_FPE0_Msk (0xffu << PWM_FPE_FPE0_Pos) /**< \brief (PWM_FPE) Fault Protection Enable for channel 0 (fault input bit varies from 0 to 5) */ +#define PWM_FPE_FPE0(value) ((PWM_FPE_FPE0_Msk & ((value) << PWM_FPE_FPE0_Pos))) +#define PWM_FPE_FPE1_Pos 8 +#define PWM_FPE_FPE1_Msk (0xffu << PWM_FPE_FPE1_Pos) /**< \brief (PWM_FPE) Fault Protection Enable for channel 1 (fault input bit varies from 0 to 5) */ +#define PWM_FPE_FPE1(value) ((PWM_FPE_FPE1_Msk & ((value) << PWM_FPE_FPE1_Pos))) +#define PWM_FPE_FPE2_Pos 16 +#define PWM_FPE_FPE2_Msk (0xffu << PWM_FPE_FPE2_Pos) /**< \brief (PWM_FPE) Fault Protection Enable for channel 2 (fault input bit varies from 0 to 5) */ +#define PWM_FPE_FPE2(value) ((PWM_FPE_FPE2_Msk & ((value) << PWM_FPE_FPE2_Pos))) +#define PWM_FPE_FPE3_Pos 24 +#define PWM_FPE_FPE3_Msk (0xffu << PWM_FPE_FPE3_Pos) /**< \brief (PWM_FPE) Fault Protection Enable for channel 3 (fault input bit varies from 0 to 5) */ +#define PWM_FPE_FPE3(value) ((PWM_FPE_FPE3_Msk & ((value) << PWM_FPE_FPE3_Pos))) +/* -------- PWM_ELMR[2] : (PWM Offset: 0x7C) PWM Event Line 0 Mode Register -------- */ +#define PWM_ELMR_CSEL0 (0x1u << 0) /**< \brief (PWM_ELMR[2]) Comparison 0 Selection */ +#define PWM_ELMR_CSEL1 (0x1u << 1) /**< \brief (PWM_ELMR[2]) Comparison 1 Selection */ +#define PWM_ELMR_CSEL2 (0x1u << 2) /**< \brief (PWM_ELMR[2]) Comparison 2 Selection */ +#define PWM_ELMR_CSEL3 (0x1u << 3) /**< \brief (PWM_ELMR[2]) Comparison 3 Selection */ +#define PWM_ELMR_CSEL4 (0x1u << 4) /**< \brief (PWM_ELMR[2]) Comparison 4 Selection */ +#define PWM_ELMR_CSEL5 (0x1u << 5) /**< \brief (PWM_ELMR[2]) Comparison 5 Selection */ +#define PWM_ELMR_CSEL6 (0x1u << 6) /**< \brief (PWM_ELMR[2]) Comparison 6 Selection */ +#define PWM_ELMR_CSEL7 (0x1u << 7) /**< \brief (PWM_ELMR[2]) Comparison 7 Selection */ +/* -------- PWM_SMMR : (PWM Offset: 0xB0) PWM Stepper Motor Mode Register -------- */ +#define PWM_SMMR_GCEN0 (0x1u << 0) /**< \brief (PWM_SMMR) Gray Count ENable */ +#define PWM_SMMR_GCEN1 (0x1u << 1) /**< \brief (PWM_SMMR) Gray Count ENable */ +#define PWM_SMMR_DOWN0 (0x1u << 16) /**< \brief (PWM_SMMR) DOWN Count */ +#define PWM_SMMR_DOWN1 (0x1u << 17) /**< \brief (PWM_SMMR) DOWN Count */ +/* -------- PWM_WPCR : (PWM Offset: 0xE4) PWM Write Protect Control Register -------- */ +#define PWM_WPCR_WPCMD_Pos 0 +#define PWM_WPCR_WPCMD_Msk (0x3u << PWM_WPCR_WPCMD_Pos) /**< \brief (PWM_WPCR) Write Protect Command */ +#define PWM_WPCR_WPCMD(value) ((PWM_WPCR_WPCMD_Msk & ((value) << PWM_WPCR_WPCMD_Pos))) +#define PWM_WPCR_WPRG0 (0x1u << 2) /**< \brief (PWM_WPCR) Write Protect Register Group 0 */ +#define PWM_WPCR_WPRG1 (0x1u << 3) /**< \brief (PWM_WPCR) Write Protect Register Group 1 */ +#define PWM_WPCR_WPRG2 (0x1u << 4) /**< \brief (PWM_WPCR) Write Protect Register Group 2 */ +#define PWM_WPCR_WPRG3 (0x1u << 5) /**< \brief (PWM_WPCR) Write Protect Register Group 3 */ +#define PWM_WPCR_WPRG4 (0x1u << 6) /**< \brief (PWM_WPCR) Write Protect Register Group 4 */ +#define PWM_WPCR_WPRG5 (0x1u << 7) /**< \brief (PWM_WPCR) Write Protect Register Group 5 */ +#define PWM_WPCR_WPKEY_Pos 8 +#define PWM_WPCR_WPKEY_Msk (0xffffffu << PWM_WPCR_WPKEY_Pos) /**< \brief (PWM_WPCR) Write Protect Key */ +#define PWM_WPCR_WPKEY(value) ((PWM_WPCR_WPKEY_Msk & ((value) << PWM_WPCR_WPKEY_Pos))) +/* -------- PWM_WPSR : (PWM Offset: 0xE8) PWM Write Protect Status Register -------- */ +#define PWM_WPSR_WPSWS0 (0x1u << 0) /**< \brief (PWM_WPSR) Write Protect SW Status */ +#define PWM_WPSR_WPSWS1 (0x1u << 1) /**< \brief (PWM_WPSR) Write Protect SW Status */ +#define PWM_WPSR_WPSWS2 (0x1u << 2) /**< \brief (PWM_WPSR) Write Protect SW Status */ +#define PWM_WPSR_WPSWS3 (0x1u << 3) /**< \brief (PWM_WPSR) Write Protect SW Status */ +#define PWM_WPSR_WPSWS4 (0x1u << 4) /**< \brief (PWM_WPSR) Write Protect SW Status */ +#define PWM_WPSR_WPSWS5 (0x1u << 5) /**< \brief (PWM_WPSR) Write Protect SW Status */ +#define PWM_WPSR_WPVS (0x1u << 7) /**< \brief (PWM_WPSR) Write Protect Violation Status */ +#define PWM_WPSR_WPHWS0 (0x1u << 8) /**< \brief (PWM_WPSR) Write Protect HW Status */ +#define PWM_WPSR_WPHWS1 (0x1u << 9) /**< \brief (PWM_WPSR) Write Protect HW Status */ +#define PWM_WPSR_WPHWS2 (0x1u << 10) /**< \brief (PWM_WPSR) Write Protect HW Status */ +#define PWM_WPSR_WPHWS3 (0x1u << 11) /**< \brief (PWM_WPSR) Write Protect HW Status */ +#define PWM_WPSR_WPHWS4 (0x1u << 12) /**< \brief (PWM_WPSR) Write Protect HW Status */ +#define PWM_WPSR_WPHWS5 (0x1u << 13) /**< \brief (PWM_WPSR) Write Protect HW Status */ +#define PWM_WPSR_WPVSRC_Pos 16 +#define PWM_WPSR_WPVSRC_Msk (0xffffu << PWM_WPSR_WPVSRC_Pos) /**< \brief (PWM_WPSR) Write Protect Violation Source */ +/* -------- PWM_TPR : (PWM Offset: 0x108) Transmit Pointer Register -------- */ +#define PWM_TPR_TXPTR_Pos 0 +#define PWM_TPR_TXPTR_Msk (0xffffffffu << PWM_TPR_TXPTR_Pos) /**< \brief (PWM_TPR) Transmit Counter Register */ +#define PWM_TPR_TXPTR(value) ((PWM_TPR_TXPTR_Msk & ((value) << PWM_TPR_TXPTR_Pos))) +/* -------- PWM_TCR : (PWM Offset: 0x10C) Transmit Counter Register -------- */ +#define PWM_TCR_TXCTR_Pos 0 +#define PWM_TCR_TXCTR_Msk (0xffffu << PWM_TCR_TXCTR_Pos) /**< \brief (PWM_TCR) Transmit Counter Register */ +#define PWM_TCR_TXCTR(value) ((PWM_TCR_TXCTR_Msk & ((value) << PWM_TCR_TXCTR_Pos))) +/* -------- PWM_TNPR : (PWM Offset: 0x118) Transmit Next Pointer Register -------- */ +#define PWM_TNPR_TXNPTR_Pos 0 +#define PWM_TNPR_TXNPTR_Msk (0xffffffffu << PWM_TNPR_TXNPTR_Pos) /**< \brief (PWM_TNPR) Transmit Next Pointer */ +#define PWM_TNPR_TXNPTR(value) ((PWM_TNPR_TXNPTR_Msk & ((value) << PWM_TNPR_TXNPTR_Pos))) +/* -------- PWM_TNCR : (PWM Offset: 0x11C) Transmit Next Counter Register -------- */ +#define PWM_TNCR_TXNCTR_Pos 0 +#define PWM_TNCR_TXNCTR_Msk (0xffffu << PWM_TNCR_TXNCTR_Pos) /**< \brief (PWM_TNCR) Transmit Counter Next */ +#define PWM_TNCR_TXNCTR(value) ((PWM_TNCR_TXNCTR_Msk & ((value) << PWM_TNCR_TXNCTR_Pos))) +/* -------- PWM_PTCR : (PWM Offset: 0x120) Transfer Control Register -------- */ +#define PWM_PTCR_RXTEN (0x1u << 0) /**< \brief (PWM_PTCR) Receiver Transfer Enable */ +#define PWM_PTCR_RXTDIS (0x1u << 1) /**< \brief (PWM_PTCR) Receiver Transfer Disable */ +#define PWM_PTCR_TXTEN (0x1u << 8) /**< \brief (PWM_PTCR) Transmitter Transfer Enable */ +#define PWM_PTCR_TXTDIS (0x1u << 9) /**< \brief (PWM_PTCR) Transmitter Transfer Disable */ +/* -------- PWM_PTSR : (PWM Offset: 0x124) Transfer Status Register -------- */ +#define PWM_PTSR_RXTEN (0x1u << 0) /**< \brief (PWM_PTSR) Receiver Transfer Enable */ +#define PWM_PTSR_TXTEN (0x1u << 8) /**< \brief (PWM_PTSR) Transmitter Transfer Enable */ +/* -------- PWM_CMPV : (PWM Offset: N/A) PWM Comparison 0 Value Register -------- */ +#define PWM_CMPV_CV_Pos 0 +#define PWM_CMPV_CV_Msk (0xffffffu << PWM_CMPV_CV_Pos) /**< \brief (PWM_CMPV) Comparison x Value */ +#define PWM_CMPV_CV(value) ((PWM_CMPV_CV_Msk & ((value) << PWM_CMPV_CV_Pos))) +#define PWM_CMPV_CVM (0x1u << 24) /**< \brief (PWM_CMPV) Comparison x Value Mode */ +/* -------- PWM_CMPVUPD : (PWM Offset: N/A) PWM Comparison 0 Value Update Register -------- */ +#define PWM_CMPVUPD_CVUPD_Pos 0 +#define PWM_CMPVUPD_CVUPD_Msk (0xffffffu << PWM_CMPVUPD_CVUPD_Pos) /**< \brief (PWM_CMPVUPD) Comparison x Value Update */ +#define PWM_CMPVUPD_CVUPD(value) ((PWM_CMPVUPD_CVUPD_Msk & ((value) << PWM_CMPVUPD_CVUPD_Pos))) +#define PWM_CMPVUPD_CVMUPD (0x1u << 24) /**< \brief (PWM_CMPVUPD) Comparison x Value Mode Update */ +/* -------- PWM_CMPM : (PWM Offset: N/A) PWM Comparison 0 Mode Register -------- */ +#define PWM_CMPM_CEN (0x1u << 0) /**< \brief (PWM_CMPM) Comparison x Enable */ +#define PWM_CMPM_CTR_Pos 4 +#define PWM_CMPM_CTR_Msk (0xfu << PWM_CMPM_CTR_Pos) /**< \brief (PWM_CMPM) Comparison x Trigger */ +#define PWM_CMPM_CTR(value) ((PWM_CMPM_CTR_Msk & ((value) << PWM_CMPM_CTR_Pos))) +#define PWM_CMPM_CPR_Pos 8 +#define PWM_CMPM_CPR_Msk (0xfu << PWM_CMPM_CPR_Pos) /**< \brief (PWM_CMPM) Comparison x Period */ +#define PWM_CMPM_CPR(value) ((PWM_CMPM_CPR_Msk & ((value) << PWM_CMPM_CPR_Pos))) +#define PWM_CMPM_CPRCNT_Pos 12 +#define PWM_CMPM_CPRCNT_Msk (0xfu << PWM_CMPM_CPRCNT_Pos) /**< \brief (PWM_CMPM) Comparison x Period Counter */ +#define PWM_CMPM_CPRCNT(value) ((PWM_CMPM_CPRCNT_Msk & ((value) << PWM_CMPM_CPRCNT_Pos))) +#define PWM_CMPM_CUPR_Pos 16 +#define PWM_CMPM_CUPR_Msk (0xfu << PWM_CMPM_CUPR_Pos) /**< \brief (PWM_CMPM) Comparison x Update Period */ +#define PWM_CMPM_CUPR(value) ((PWM_CMPM_CUPR_Msk & ((value) << PWM_CMPM_CUPR_Pos))) +#define PWM_CMPM_CUPRCNT_Pos 20 +#define PWM_CMPM_CUPRCNT_Msk (0xfu << PWM_CMPM_CUPRCNT_Pos) /**< \brief (PWM_CMPM) Comparison x Update Period Counter */ +#define PWM_CMPM_CUPRCNT(value) ((PWM_CMPM_CUPRCNT_Msk & ((value) << PWM_CMPM_CUPRCNT_Pos))) +/* -------- PWM_CMPMUPD : (PWM Offset: N/A) PWM Comparison 0 Mode Update Register -------- */ +#define PWM_CMPMUPD_CENUPD (0x1u << 0) /**< \brief (PWM_CMPMUPD) Comparison x Enable Update */ +#define PWM_CMPMUPD_CTRUPD_Pos 4 +#define PWM_CMPMUPD_CTRUPD_Msk (0xfu << PWM_CMPMUPD_CTRUPD_Pos) /**< \brief (PWM_CMPMUPD) Comparison x Trigger Update */ +#define PWM_CMPMUPD_CTRUPD(value) ((PWM_CMPMUPD_CTRUPD_Msk & ((value) << PWM_CMPMUPD_CTRUPD_Pos))) +#define PWM_CMPMUPD_CPRUPD_Pos 8 +#define PWM_CMPMUPD_CPRUPD_Msk (0xfu << PWM_CMPMUPD_CPRUPD_Pos) /**< \brief (PWM_CMPMUPD) Comparison x Period Update */ +#define PWM_CMPMUPD_CPRUPD(value) ((PWM_CMPMUPD_CPRUPD_Msk & ((value) << PWM_CMPMUPD_CPRUPD_Pos))) +#define PWM_CMPMUPD_CUPRUPD_Pos 16 +#define PWM_CMPMUPD_CUPRUPD_Msk (0xfu << PWM_CMPMUPD_CUPRUPD_Pos) /**< \brief (PWM_CMPMUPD) Comparison x Update Period Update */ +#define PWM_CMPMUPD_CUPRUPD(value) ((PWM_CMPMUPD_CUPRUPD_Msk & ((value) << PWM_CMPMUPD_CUPRUPD_Pos))) +/* -------- PWM_CMR : (PWM Offset: N/A) PWM Channel Mode Register -------- */ +#define PWM_CMR_CPRE_Pos 0 +#define PWM_CMR_CPRE_Msk (0xfu << PWM_CMR_CPRE_Pos) /**< \brief (PWM_CMR) Channel Pre-scaler */ +#define PWM_CMR_CPRE_MCK (0x0u << 0) /**< \brief (PWM_CMR) Master clock */ +#define PWM_CMR_CPRE_MCK_DIV_2 (0x1u << 0) /**< \brief (PWM_CMR) Master clock/2 */ +#define PWM_CMR_CPRE_MCK_DIV_4 (0x2u << 0) /**< \brief (PWM_CMR) Master clock/4 */ +#define PWM_CMR_CPRE_MCK_DIV_8 (0x3u << 0) /**< \brief (PWM_CMR) Master clock/8 */ +#define PWM_CMR_CPRE_MCK_DIV_16 (0x4u << 0) /**< \brief (PWM_CMR) Master clock/16 */ +#define PWM_CMR_CPRE_MCK_DIV_32 (0x5u << 0) /**< \brief (PWM_CMR) Master clock/32 */ +#define PWM_CMR_CPRE_MCK_DIV_64 (0x6u << 0) /**< \brief (PWM_CMR) Master clock/64 */ +#define PWM_CMR_CPRE_MCK_DIV_128 (0x7u << 0) /**< \brief (PWM_CMR) Master clock/128 */ +#define PWM_CMR_CPRE_MCK_DIV_256 (0x8u << 0) /**< \brief (PWM_CMR) Master clock/256 */ +#define PWM_CMR_CPRE_MCK_DIV_512 (0x9u << 0) /**< \brief (PWM_CMR) Master clock/512 */ +#define PWM_CMR_CPRE_MCK_DIV_1024 (0xAu << 0) /**< \brief (PWM_CMR) Master clock/1024 */ +#define PWM_CMR_CPRE_CLKA (0xBu << 0) /**< \brief (PWM_CMR) Clock A */ +#define PWM_CMR_CPRE_CLKB (0xCu << 0) /**< \brief (PWM_CMR) Clock B */ +#define PWM_CMR_CALG (0x1u << 8) /**< \brief (PWM_CMR) Channel Alignment */ +#define PWM_CMR_CPOL (0x1u << 9) /**< \brief (PWM_CMR) Channel Polarity */ +#define PWM_CMR_CES (0x1u << 10) /**< \brief (PWM_CMR) Counter Event Selection */ +#define PWM_CMR_DTE (0x1u << 16) /**< \brief (PWM_CMR) Dead-Time Generator Enable */ +#define PWM_CMR_DTHI (0x1u << 17) /**< \brief (PWM_CMR) Dead-Time PWMHx Output Inverted */ +#define PWM_CMR_DTLI (0x1u << 18) /**< \brief (PWM_CMR) Dead-Time PWMLx Output Inverted */ +/* -------- PWM_CDTY : (PWM Offset: N/A) PWM Channel Duty Cycle Register -------- */ +#define PWM_CDTY_CDTY_Pos 0 +#define PWM_CDTY_CDTY_Msk (0xffffffu << PWM_CDTY_CDTY_Pos) /**< \brief (PWM_CDTY) Channel Duty-Cycle */ +#define PWM_CDTY_CDTY(value) ((PWM_CDTY_CDTY_Msk & ((value) << PWM_CDTY_CDTY_Pos))) +/* -------- PWM_CDTYUPD : (PWM Offset: N/A) PWM Channel Duty Cycle Update Register -------- */ +#define PWM_CDTYUPD_CDTYUPD_Pos 0 +#define PWM_CDTYUPD_CDTYUPD_Msk (0xffffffu << PWM_CDTYUPD_CDTYUPD_Pos) /**< \brief (PWM_CDTYUPD) Channel Duty-Cycle Update */ +#define PWM_CDTYUPD_CDTYUPD(value) ((PWM_CDTYUPD_CDTYUPD_Msk & ((value) << PWM_CDTYUPD_CDTYUPD_Pos))) +/* -------- PWM_CPRD : (PWM Offset: N/A) PWM Channel Period Register -------- */ +#define PWM_CPRD_CPRD_Pos 0 +#define PWM_CPRD_CPRD_Msk (0xffffffu << PWM_CPRD_CPRD_Pos) /**< \brief (PWM_CPRD) Channel Period */ +#define PWM_CPRD_CPRD(value) ((PWM_CPRD_CPRD_Msk & ((value) << PWM_CPRD_CPRD_Pos))) +/* -------- PWM_CPRDUPD : (PWM Offset: N/A) PWM Channel Period Update Register -------- */ +#define PWM_CPRDUPD_CPRDUPD_Pos 0 +#define PWM_CPRDUPD_CPRDUPD_Msk (0xffffffu << PWM_CPRDUPD_CPRDUPD_Pos) /**< \brief (PWM_CPRDUPD) Channel Period Update */ +#define PWM_CPRDUPD_CPRDUPD(value) ((PWM_CPRDUPD_CPRDUPD_Msk & ((value) << PWM_CPRDUPD_CPRDUPD_Pos))) +/* -------- PWM_CCNT : (PWM Offset: N/A) PWM Channel Counter Register -------- */ +#define PWM_CCNT_CNT_Pos 0 +#define PWM_CCNT_CNT_Msk (0xffffffu << PWM_CCNT_CNT_Pos) /**< \brief (PWM_CCNT) Channel Counter Register */ +/* -------- PWM_DT : (PWM Offset: N/A) PWM Channel Dead Time Register -------- */ +#define PWM_DT_DTH_Pos 0 +#define PWM_DT_DTH_Msk (0xffffu << PWM_DT_DTH_Pos) /**< \brief (PWM_DT) Dead-Time Value for PWMHx Output */ +#define PWM_DT_DTH(value) ((PWM_DT_DTH_Msk & ((value) << PWM_DT_DTH_Pos))) +#define PWM_DT_DTL_Pos 16 +#define PWM_DT_DTL_Msk (0xffffu << PWM_DT_DTL_Pos) /**< \brief (PWM_DT) Dead-Time Value for PWMLx Output */ +#define PWM_DT_DTL(value) ((PWM_DT_DTL_Msk & ((value) << PWM_DT_DTL_Pos))) +/* -------- PWM_DTUPD : (PWM Offset: N/A) PWM Channel Dead Time Update Register -------- */ +#define PWM_DTUPD_DTHUPD_Pos 0 +#define PWM_DTUPD_DTHUPD_Msk (0xffffu << PWM_DTUPD_DTHUPD_Pos) /**< \brief (PWM_DTUPD) Dead-Time Value Update for PWMHx Output */ +#define PWM_DTUPD_DTHUPD(value) ((PWM_DTUPD_DTHUPD_Msk & ((value) << PWM_DTUPD_DTHUPD_Pos))) +#define PWM_DTUPD_DTLUPD_Pos 16 +#define PWM_DTUPD_DTLUPD_Msk (0xffffu << PWM_DTUPD_DTLUPD_Pos) /**< \brief (PWM_DTUPD) Dead-Time Value Update for PWMLx Output */ +#define PWM_DTUPD_DTLUPD(value) ((PWM_DTUPD_DTLUPD_Msk & ((value) << PWM_DTUPD_DTLUPD_Pos))) + +/*@}*/ + + +#endif /* _SAM4S_PWM_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_rstc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_rstc.h new file mode 100644 index 0000000..2172a94 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_rstc.h
@@ -0,0 +1,83 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_RSTC_COMPONENT_ +#define _SAM4S_RSTC_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Reset Controller */ +/* ============================================================================= */ +/** \addtogroup SAM4S_RSTC Reset Controller */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Rstc hardware registers */ +typedef struct { + WoReg RSTC_CR; /**< \brief (Rstc Offset: 0x00) Control Register */ + RoReg RSTC_SR; /**< \brief (Rstc Offset: 0x04) Status Register */ + RwReg RSTC_MR; /**< \brief (Rstc Offset: 0x08) Mode Register */ +} Rstc; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- RSTC_CR : (RSTC Offset: 0x00) Control Register -------- */ +#define RSTC_CR_PROCRST (0x1u << 0) /**< \brief (RSTC_CR) Processor Reset */ +#define RSTC_CR_PERRST (0x1u << 2) /**< \brief (RSTC_CR) Peripheral Reset */ +#define RSTC_CR_EXTRST (0x1u << 3) /**< \brief (RSTC_CR) External Reset */ +#define RSTC_CR_KEY_Pos 24 +#define RSTC_CR_KEY_Msk (0xffu << RSTC_CR_KEY_Pos) /**< \brief (RSTC_CR) Password */ +#define RSTC_CR_KEY(value) ((RSTC_CR_KEY_Msk & ((value) << RSTC_CR_KEY_Pos))) +/* -------- RSTC_SR : (RSTC Offset: 0x04) Status Register -------- */ +#define RSTC_SR_URSTS (0x1u << 0) /**< \brief (RSTC_SR) User Reset Status */ +#define RSTC_SR_RSTTYP_Pos 8 +#define RSTC_SR_RSTTYP_Msk (0x7u << RSTC_SR_RSTTYP_Pos) /**< \brief (RSTC_SR) Reset Type */ +#define RSTC_SR_NRSTL (0x1u << 16) /**< \brief (RSTC_SR) NRST Pin Level */ +#define RSTC_SR_SRCMP (0x1u << 17) /**< \brief (RSTC_SR) Software Reset Command in Progress */ +/* -------- RSTC_MR : (RSTC Offset: 0x08) Mode Register -------- */ +#define RSTC_MR_URSTEN (0x1u << 0) /**< \brief (RSTC_MR) User Reset Enable */ +#define RSTC_MR_URSTIEN (0x1u << 4) /**< \brief (RSTC_MR) User Reset Interrupt Enable */ +#define RSTC_MR_ERSTL_Pos 8 +#define RSTC_MR_ERSTL_Msk (0xfu << RSTC_MR_ERSTL_Pos) /**< \brief (RSTC_MR) External Reset Length */ +#define RSTC_MR_ERSTL(value) ((RSTC_MR_ERSTL_Msk & ((value) << RSTC_MR_ERSTL_Pos))) +#define RSTC_MR_KEY_Pos 24 +#define RSTC_MR_KEY_Msk (0xffu << RSTC_MR_KEY_Pos) /**< \brief (RSTC_MR) Password */ +#define RSTC_MR_KEY(value) ((RSTC_MR_KEY_Msk & ((value) << RSTC_MR_KEY_Pos))) + +/*@}*/ + + +#endif /* _SAM4S_RSTC_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_rtc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_rtc.h new file mode 100644 index 0000000..89a785b --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_rtc.h
@@ -0,0 +1,213 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_RTC_COMPONENT_ +#define _SAM4S_RTC_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Real-time Clock */ +/* ============================================================================= */ +/** \addtogroup SAM4S_RTC Real-time Clock */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Rtc hardware registers */ +typedef struct { + RwReg RTC_CR; /**< \brief (Rtc Offset: 0x00) Control Register */ + RwReg RTC_MR; /**< \brief (Rtc Offset: 0x04) Mode Register */ + RwReg RTC_TIMR; /**< \brief (Rtc Offset: 0x08) Time Register */ + RwReg RTC_CALR; /**< \brief (Rtc Offset: 0x0C) Calendar Register */ + RwReg RTC_TIMALR; /**< \brief (Rtc Offset: 0x10) Time Alarm Register */ + RwReg RTC_CALALR; /**< \brief (Rtc Offset: 0x14) Calendar Alarm Register */ + RoReg RTC_SR; /**< \brief (Rtc Offset: 0x18) Status Register */ + WoReg RTC_SCCR; /**< \brief (Rtc Offset: 0x1C) Status Clear Command Register */ + WoReg RTC_IER; /**< \brief (Rtc Offset: 0x20) Interrupt Enable Register */ + WoReg RTC_IDR; /**< \brief (Rtc Offset: 0x24) Interrupt Disable Register */ + RoReg RTC_IMR; /**< \brief (Rtc Offset: 0x28) Interrupt Mask Register */ + RoReg RTC_VER; /**< \brief (Rtc Offset: 0x2C) Valid Entry Register */ +} Rtc; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- RTC_CR : (RTC Offset: 0x00) Control Register -------- */ +#define RTC_CR_UPDTIM (0x1u << 0) /**< \brief (RTC_CR) Update Request Time Register */ +#define RTC_CR_UPDCAL (0x1u << 1) /**< \brief (RTC_CR) Update Request Calendar Register */ +#define RTC_CR_TIMEVSEL_Pos 8 +#define RTC_CR_TIMEVSEL_Msk (0x3u << RTC_CR_TIMEVSEL_Pos) /**< \brief (RTC_CR) Time Event Selection */ +#define RTC_CR_TIMEVSEL_MINUTE (0x0u << 8) /**< \brief (RTC_CR) Minute change */ +#define RTC_CR_TIMEVSEL_HOUR (0x1u << 8) /**< \brief (RTC_CR) Hour change */ +#define RTC_CR_TIMEVSEL_MIDNIGHT (0x2u << 8) /**< \brief (RTC_CR) Every day at midnight */ +#define RTC_CR_TIMEVSEL_NOON (0x3u << 8) /**< \brief (RTC_CR) Every day at noon */ +#define RTC_CR_CALEVSEL_Pos 16 +#define RTC_CR_CALEVSEL_Msk (0x3u << RTC_CR_CALEVSEL_Pos) /**< \brief (RTC_CR) Calendar Event Selection */ +#define RTC_CR_CALEVSEL_WEEK (0x0u << 16) /**< \brief (RTC_CR) Week change (every Monday at time 00:00:00) */ +#define RTC_CR_CALEVSEL_MONTH (0x1u << 16) /**< \brief (RTC_CR) Month change (every 01 of each month at time 00:00:00) */ +#define RTC_CR_CALEVSEL_YEAR (0x2u << 16) /**< \brief (RTC_CR) Year change (every January 1 at time 00:00:00) */ +/* -------- RTC_MR : (RTC Offset: 0x04) Mode Register -------- */ +#define RTC_MR_HRMOD (0x1u << 0) /**< \brief (RTC_MR) 12-/24-hour Mode */ +#define RTC_MR_PERSIAN (0x1u << 1) /**< \brief (RTC_MR) PERSIAN Calendar */ +#define RTC_MR_NEGPPM (0x1u << 4) /**< \brief (RTC_MR) NEGative PPM Correction */ +#define RTC_MR_CORRECTION_Pos 8 +#define RTC_MR_CORRECTION_Msk (0x7fu << RTC_MR_CORRECTION_Pos) /**< \brief (RTC_MR) */ +#define RTC_MR_CORRECTION(value) ((RTC_MR_CORRECTION_Msk & ((value) << RTC_MR_CORRECTION_Pos))) +#define RTC_MR_HIGHPPM (0x1u << 15) /**< \brief (RTC_MR) HIGH PPM Correction */ +#define RTC_MR_OUT0_Pos 16 +#define RTC_MR_OUT0_Msk (0x7u << RTC_MR_OUT0_Pos) /**< \brief (RTC_MR) RTCOUT0 Output Source Selection */ +#define RTC_MR_OUT0_NO_WAVE (0x0u << 16) /**< \brief (RTC_MR) no waveform, stuck at '0' */ +#define RTC_MR_OUT0_FREQ1HZ (0x1u << 16) /**< \brief (RTC_MR) 1 Hz square wave */ +#define RTC_MR_OUT0_FREQ32HZ (0x2u << 16) /**< \brief (RTC_MR) 32 Hz square wave */ +#define RTC_MR_OUT0_FREQ64HZ (0x3u << 16) /**< \brief (RTC_MR) 64 Hz square wave */ +#define RTC_MR_OUT0_FREQ512HZ (0x4u << 16) /**< \brief (RTC_MR) 512 Hz square wave */ +#define RTC_MR_OUT0_ALARM_TOGGLE (0x5u << 16) /**< \brief (RTC_MR) output toggles when alarm flag rises */ +#define RTC_MR_OUT0_ALARM_FLAG (0x6u << 16) /**< \brief (RTC_MR) output is a copy of the alarm flag */ +#define RTC_MR_OUT0_PROG_PULSE (0x7u << 16) /**< \brief (RTC_MR) duty cycle programmable pulse */ +#define RTC_MR_OUT1_Pos 20 +#define RTC_MR_OUT1_Msk (0x7u << RTC_MR_OUT1_Pos) /**< \brief (RTC_MR) RTCOUT1 Output Source Selection */ +#define RTC_MR_OUT1_NO_WAVE (0x0u << 20) /**< \brief (RTC_MR) no waveform, stuck at '0' */ +#define RTC_MR_OUT1_FREQ1HZ (0x1u << 20) /**< \brief (RTC_MR) 1 Hz square wave */ +#define RTC_MR_OUT1_FREQ32HZ (0x2u << 20) /**< \brief (RTC_MR) 32 Hz square wave */ +#define RTC_MR_OUT1_FREQ64HZ (0x3u << 20) /**< \brief (RTC_MR) 64 Hz square wave */ +#define RTC_MR_OUT1_FREQ512HZ (0x4u << 20) /**< \brief (RTC_MR) 512 Hz square wave */ +#define RTC_MR_OUT1_ALARM_TOGGLE (0x5u << 20) /**< \brief (RTC_MR) output toggles when alarm flag rises */ +#define RTC_MR_OUT1_ALARM_FLAG (0x6u << 20) /**< \brief (RTC_MR) output is a copy of the alarm flag */ +#define RTC_MR_OUT1_PROG_PULSE (0x7u << 20) /**< \brief (RTC_MR) duty cycle programmable pulse */ +#define RTC_MR_THIGH_Pos 24 +#define RTC_MR_THIGH_Msk (0x7u << RTC_MR_THIGH_Pos) /**< \brief (RTC_MR) High Duration of the Output Pulse */ +#define RTC_MR_THIGH_H_31MS (0x0u << 24) /**< \brief (RTC_MR) 31.2 ms */ +#define RTC_MR_THIGH_H_16MS (0x1u << 24) /**< \brief (RTC_MR) 15.6 ms */ +#define RTC_MR_THIGH_H_4MS (0x2u << 24) /**< \brief (RTC_MR) 3.91 ms */ +#define RTC_MR_THIGH_H_967US (0x3u << 24) /**< \brief (RTC_MR) 967 \xb5 s */ +#define RTC_MR_THIGH_H_488US (0x4u << 24) /**< \brief (RTC_MR) 488 \xb5 s */ +#define RTC_MR_THIGH_H_122US (0x5u << 24) /**< \brief (RTC_MR) 122 \xb5 s */ +#define RTC_MR_THIGH_H_30US (0x6u << 24) /**< \brief (RTC_MR) 30.5 \xb5 s */ +#define RTC_MR_THIGH_H_15US (0x7u << 24) /**< \brief (RTC_MR) 15.2 \xb5 s */ +#define RTC_MR_TPERIOD_Pos 28 +#define RTC_MR_TPERIOD_Msk (0x3u << RTC_MR_TPERIOD_Pos) /**< \brief (RTC_MR) Period of the Output Pulse */ +#define RTC_MR_TPERIOD_P_1S (0x0u << 28) /**< \brief (RTC_MR) 1 second */ +#define RTC_MR_TPERIOD_P_500MS (0x1u << 28) /**< \brief (RTC_MR) 500 ms */ +#define RTC_MR_TPERIOD_P_250MS (0x2u << 28) /**< \brief (RTC_MR) 250 ms */ +#define RTC_MR_TPERIOD_P_125MS (0x3u << 28) /**< \brief (RTC_MR) 125 ms */ +/* -------- RTC_TIMR : (RTC Offset: 0x08) Time Register -------- */ +#define RTC_TIMR_SEC_Pos 0 +#define RTC_TIMR_SEC_Msk (0x7fu << RTC_TIMR_SEC_Pos) /**< \brief (RTC_TIMR) Current Second */ +#define RTC_TIMR_SEC(value) ((RTC_TIMR_SEC_Msk & ((value) << RTC_TIMR_SEC_Pos))) +#define RTC_TIMR_MIN_Pos 8 +#define RTC_TIMR_MIN_Msk (0x7fu << RTC_TIMR_MIN_Pos) /**< \brief (RTC_TIMR) Current Minute */ +#define RTC_TIMR_MIN(value) ((RTC_TIMR_MIN_Msk & ((value) << RTC_TIMR_MIN_Pos))) +#define RTC_TIMR_HOUR_Pos 16 +#define RTC_TIMR_HOUR_Msk (0x3fu << RTC_TIMR_HOUR_Pos) /**< \brief (RTC_TIMR) Current Hour */ +#define RTC_TIMR_HOUR(value) ((RTC_TIMR_HOUR_Msk & ((value) << RTC_TIMR_HOUR_Pos))) +#define RTC_TIMR_AMPM (0x1u << 22) /**< \brief (RTC_TIMR) Ante Meridiem Post Meridiem Indicator */ +/* -------- RTC_CALR : (RTC Offset: 0x0C) Calendar Register -------- */ +#define RTC_CALR_CENT_Pos 0 +#define RTC_CALR_CENT_Msk (0x7fu << RTC_CALR_CENT_Pos) /**< \brief (RTC_CALR) Current Century */ +#define RTC_CALR_CENT(value) ((RTC_CALR_CENT_Msk & ((value) << RTC_CALR_CENT_Pos))) +#define RTC_CALR_YEAR_Pos 8 +#define RTC_CALR_YEAR_Msk (0xffu << RTC_CALR_YEAR_Pos) /**< \brief (RTC_CALR) Current Year */ +#define RTC_CALR_YEAR(value) ((RTC_CALR_YEAR_Msk & ((value) << RTC_CALR_YEAR_Pos))) +#define RTC_CALR_MONTH_Pos 16 +#define RTC_CALR_MONTH_Msk (0x1fu << RTC_CALR_MONTH_Pos) /**< \brief (RTC_CALR) Current Month */ +#define RTC_CALR_MONTH(value) ((RTC_CALR_MONTH_Msk & ((value) << RTC_CALR_MONTH_Pos))) +#define RTC_CALR_DAY_Pos 21 +#define RTC_CALR_DAY_Msk (0x7u << RTC_CALR_DAY_Pos) /**< \brief (RTC_CALR) Current Day in Current Week */ +#define RTC_CALR_DAY(value) ((RTC_CALR_DAY_Msk & ((value) << RTC_CALR_DAY_Pos))) +#define RTC_CALR_DATE_Pos 24 +#define RTC_CALR_DATE_Msk (0x3fu << RTC_CALR_DATE_Pos) /**< \brief (RTC_CALR) Current Day in Current Month */ +#define RTC_CALR_DATE(value) ((RTC_CALR_DATE_Msk & ((value) << RTC_CALR_DATE_Pos))) +/* -------- RTC_TIMALR : (RTC Offset: 0x10) Time Alarm Register -------- */ +#define RTC_TIMALR_SEC_Pos 0 +#define RTC_TIMALR_SEC_Msk (0x7fu << RTC_TIMALR_SEC_Pos) /**< \brief (RTC_TIMALR) Second Alarm */ +#define RTC_TIMALR_SEC(value) ((RTC_TIMALR_SEC_Msk & ((value) << RTC_TIMALR_SEC_Pos))) +#define RTC_TIMALR_SECEN (0x1u << 7) /**< \brief (RTC_TIMALR) Second Alarm Enable */ +#define RTC_TIMALR_MIN_Pos 8 +#define RTC_TIMALR_MIN_Msk (0x7fu << RTC_TIMALR_MIN_Pos) /**< \brief (RTC_TIMALR) Minute Alarm */ +#define RTC_TIMALR_MIN(value) ((RTC_TIMALR_MIN_Msk & ((value) << RTC_TIMALR_MIN_Pos))) +#define RTC_TIMALR_MINEN (0x1u << 15) /**< \brief (RTC_TIMALR) Minute Alarm Enable */ +#define RTC_TIMALR_HOUR_Pos 16 +#define RTC_TIMALR_HOUR_Msk (0x3fu << RTC_TIMALR_HOUR_Pos) /**< \brief (RTC_TIMALR) Hour Alarm */ +#define RTC_TIMALR_HOUR(value) ((RTC_TIMALR_HOUR_Msk & ((value) << RTC_TIMALR_HOUR_Pos))) +#define RTC_TIMALR_AMPM (0x1u << 22) /**< \brief (RTC_TIMALR) AM/PM Indicator */ +#define RTC_TIMALR_HOUREN (0x1u << 23) /**< \brief (RTC_TIMALR) Hour Alarm Enable */ +/* -------- RTC_CALALR : (RTC Offset: 0x14) Calendar Alarm Register -------- */ +#define RTC_CALALR_MONTH_Pos 16 +#define RTC_CALALR_MONTH_Msk (0x1fu << RTC_CALALR_MONTH_Pos) /**< \brief (RTC_CALALR) Month Alarm */ +#define RTC_CALALR_MONTH(value) ((RTC_CALALR_MONTH_Msk & ((value) << RTC_CALALR_MONTH_Pos))) +#define RTC_CALALR_MTHEN (0x1u << 23) /**< \brief (RTC_CALALR) Month Alarm Enable */ +#define RTC_CALALR_DATE_Pos 24 +#define RTC_CALALR_DATE_Msk (0x3fu << RTC_CALALR_DATE_Pos) /**< \brief (RTC_CALALR) Date Alarm */ +#define RTC_CALALR_DATE(value) ((RTC_CALALR_DATE_Msk & ((value) << RTC_CALALR_DATE_Pos))) +#define RTC_CALALR_DATEEN (0x1u << 31) /**< \brief (RTC_CALALR) Date Alarm Enable */ +/* -------- RTC_SR : (RTC Offset: 0x18) Status Register -------- */ +#define RTC_SR_ACKUPD (0x1u << 0) /**< \brief (RTC_SR) Acknowledge for Update */ +#define RTC_SR_ALARM (0x1u << 1) /**< \brief (RTC_SR) Alarm Flag */ +#define RTC_SR_SEC (0x1u << 2) /**< \brief (RTC_SR) Second Event */ +#define RTC_SR_TIMEV (0x1u << 3) /**< \brief (RTC_SR) Time Event */ +#define RTC_SR_CALEV (0x1u << 4) /**< \brief (RTC_SR) Calendar Event */ +/* -------- RTC_SCCR : (RTC Offset: 0x1C) Status Clear Command Register -------- */ +#define RTC_SCCR_ACKCLR (0x1u << 0) /**< \brief (RTC_SCCR) Acknowledge Clear */ +#define RTC_SCCR_ALRCLR (0x1u << 1) /**< \brief (RTC_SCCR) Alarm Clear */ +#define RTC_SCCR_SECCLR (0x1u << 2) /**< \brief (RTC_SCCR) Second Clear */ +#define RTC_SCCR_TIMCLR (0x1u << 3) /**< \brief (RTC_SCCR) Time Clear */ +#define RTC_SCCR_CALCLR (0x1u << 4) /**< \brief (RTC_SCCR) Calendar Clear */ +/* -------- RTC_IER : (RTC Offset: 0x20) Interrupt Enable Register -------- */ +#define RTC_IER_ACKEN (0x1u << 0) /**< \brief (RTC_IER) Acknowledge Update Interrupt Enable */ +#define RTC_IER_ALREN (0x1u << 1) /**< \brief (RTC_IER) Alarm Interrupt Enable */ +#define RTC_IER_SECEN (0x1u << 2) /**< \brief (RTC_IER) Second Event Interrupt Enable */ +#define RTC_IER_TIMEN (0x1u << 3) /**< \brief (RTC_IER) Time Event Interrupt Enable */ +#define RTC_IER_CALEN (0x1u << 4) /**< \brief (RTC_IER) Calendar Event Interrupt Enable */ +/* -------- RTC_IDR : (RTC Offset: 0x24) Interrupt Disable Register -------- */ +#define RTC_IDR_ACKDIS (0x1u << 0) /**< \brief (RTC_IDR) Acknowledge Update Interrupt Disable */ +#define RTC_IDR_ALRDIS (0x1u << 1) /**< \brief (RTC_IDR) Alarm Interrupt Disable */ +#define RTC_IDR_SECDIS (0x1u << 2) /**< \brief (RTC_IDR) Second Event Interrupt Disable */ +#define RTC_IDR_TIMDIS (0x1u << 3) /**< \brief (RTC_IDR) Time Event Interrupt Disable */ +#define RTC_IDR_CALDIS (0x1u << 4) /**< \brief (RTC_IDR) Calendar Event Interrupt Disable */ +/* -------- RTC_IMR : (RTC Offset: 0x28) Interrupt Mask Register -------- */ +#define RTC_IMR_ACK (0x1u << 0) /**< \brief (RTC_IMR) Acknowledge Update Interrupt Mask */ +#define RTC_IMR_ALR (0x1u << 1) /**< \brief (RTC_IMR) Alarm Interrupt Mask */ +#define RTC_IMR_SEC (0x1u << 2) /**< \brief (RTC_IMR) Second Event Interrupt Mask */ +#define RTC_IMR_TIM (0x1u << 3) /**< \brief (RTC_IMR) Time Event Interrupt Mask */ +#define RTC_IMR_CAL (0x1u << 4) /**< \brief (RTC_IMR) Calendar Event Interrupt Mask */ +/* -------- RTC_VER : (RTC Offset: 0x2C) Valid Entry Register -------- */ +#define RTC_VER_NVTIM (0x1u << 0) /**< \brief (RTC_VER) Non-valid Time */ +#define RTC_VER_NVCAL (0x1u << 1) /**< \brief (RTC_VER) Non-valid Calendar */ +#define RTC_VER_NVTIMALR (0x1u << 2) /**< \brief (RTC_VER) Non-valid Time Alarm */ +#define RTC_VER_NVCALALR (0x1u << 3) /**< \brief (RTC_VER) Non-valid Calendar Alarm */ + +/*@}*/ + + +#endif /* _SAM4S_RTC_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_rtt.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_rtt.h new file mode 100644 index 0000000..4a036dc --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_rtt.h
@@ -0,0 +1,79 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_RTT_COMPONENT_ +#define _SAM4S_RTT_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Real-time Timer */ +/* ============================================================================= */ +/** \addtogroup SAM4S_RTT Real-time Timer */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Rtt hardware registers */ +typedef struct { + RwReg RTT_MR; /**< \brief (Rtt Offset: 0x00) Mode Register */ + RwReg RTT_AR; /**< \brief (Rtt Offset: 0x04) Alarm Register */ + RoReg RTT_VR; /**< \brief (Rtt Offset: 0x08) Value Register */ + RoReg RTT_SR; /**< \brief (Rtt Offset: 0x0C) Status Register */ +} Rtt; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- RTT_MR : (RTT Offset: 0x00) Mode Register -------- */ +#define RTT_MR_RTPRES_Pos 0 +#define RTT_MR_RTPRES_Msk (0xffffu << RTT_MR_RTPRES_Pos) /**< \brief (RTT_MR) Real-time Timer Prescaler Value */ +#define RTT_MR_RTPRES(value) ((RTT_MR_RTPRES_Msk & ((value) << RTT_MR_RTPRES_Pos))) +#define RTT_MR_ALMIEN (0x1u << 16) /**< \brief (RTT_MR) Alarm Interrupt Enable */ +#define RTT_MR_RTTINCIEN (0x1u << 17) /**< \brief (RTT_MR) Real-time Timer Increment Interrupt Enable */ +#define RTT_MR_RTTRST (0x1u << 18) /**< \brief (RTT_MR) Real-time Timer Restart */ +/* -------- RTT_AR : (RTT Offset: 0x04) Alarm Register -------- */ +#define RTT_AR_ALMV_Pos 0 +#define RTT_AR_ALMV_Msk (0xffffffffu << RTT_AR_ALMV_Pos) /**< \brief (RTT_AR) Alarm Value */ +#define RTT_AR_ALMV(value) ((RTT_AR_ALMV_Msk & ((value) << RTT_AR_ALMV_Pos))) +/* -------- RTT_VR : (RTT Offset: 0x08) Value Register -------- */ +#define RTT_VR_CRTV_Pos 0 +#define RTT_VR_CRTV_Msk (0xffffffffu << RTT_VR_CRTV_Pos) /**< \brief (RTT_VR) Current Real-time Value */ +/* -------- RTT_SR : (RTT Offset: 0x0C) Status Register -------- */ +#define RTT_SR_ALMS (0x1u << 0) /**< \brief (RTT_SR) Real-time Alarm Status */ +#define RTT_SR_RTTINC (0x1u << 1) /**< \brief (RTT_SR) Real-time Timer Increment */ + +/*@}*/ + + +#endif /* _SAM4S_RTT_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_smc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_smc.h new file mode 100644 index 0000000..d79db66 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_smc.h
@@ -0,0 +1,154 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_SMC_COMPONENT_ +#define _SAM4S_SMC_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Static Memory Controller */ +/* ============================================================================= */ +/** \addtogroup SAM4S_SMC Static Memory Controller */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief SmcCs_number hardware registers */ +typedef struct { + RwReg SMC_SETUP; /**< \brief (SmcCs_number Offset: 0x0) SMC Setup Register */ + RwReg SMC_PULSE; /**< \brief (SmcCs_number Offset: 0x4) SMC Pulse Register */ + RwReg SMC_CYCLE; /**< \brief (SmcCs_number Offset: 0x8) SMC Cycle Register */ + RwReg SMC_MODE; /**< \brief (SmcCs_number Offset: 0xC) SMC Mode Register */ +} SmcCs_number; +/** \brief Smc hardware registers */ +#define SMCCS_NUMBER_NUMBER 5 +typedef struct { + SmcCs_number SMC_CS_NUMBER[SMCCS_NUMBER_NUMBER]; /**< \brief (Smc Offset: 0x0) CS_number = 0 .. 4 */ + RoReg Reserved1[12]; + RwReg SMC_OCMS; /**< \brief (Smc Offset: 0x80) SMC OCMS MODE Register */ + WoReg SMC_KEY1; /**< \brief (Smc Offset: 0x84) SMC OCMS KEY1 Register */ + WoReg SMC_KEY2; /**< \brief (Smc Offset: 0x88) SMC OCMS KEY2 Register */ + RoReg Reserved2[22]; + RwReg SMC_WPMR; /**< \brief (Smc Offset: 0xE4) SMC Write Protect Mode Register */ + RoReg SMC_WPSR; /**< \brief (Smc Offset: 0xE8) SMC Write Protect Status Register */ +} Smc; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- SMC_SETUP : (SMC Offset: N/A) SMC Setup Register -------- */ +#define SMC_SETUP_NWE_SETUP_Pos 0 +#define SMC_SETUP_NWE_SETUP_Msk (0x3fu << SMC_SETUP_NWE_SETUP_Pos) /**< \brief (SMC_SETUP) NWE Setup Length */ +#define SMC_SETUP_NWE_SETUP(value) ((SMC_SETUP_NWE_SETUP_Msk & ((value) << SMC_SETUP_NWE_SETUP_Pos))) +#define SMC_SETUP_NCS_WR_SETUP_Pos 8 +#define SMC_SETUP_NCS_WR_SETUP_Msk (0x3fu << SMC_SETUP_NCS_WR_SETUP_Pos) /**< \brief (SMC_SETUP) NCS Setup Length in WRITE Access */ +#define SMC_SETUP_NCS_WR_SETUP(value) ((SMC_SETUP_NCS_WR_SETUP_Msk & ((value) << SMC_SETUP_NCS_WR_SETUP_Pos))) +#define SMC_SETUP_NRD_SETUP_Pos 16 +#define SMC_SETUP_NRD_SETUP_Msk (0x3fu << SMC_SETUP_NRD_SETUP_Pos) /**< \brief (SMC_SETUP) NRD Setup Length */ +#define SMC_SETUP_NRD_SETUP(value) ((SMC_SETUP_NRD_SETUP_Msk & ((value) << SMC_SETUP_NRD_SETUP_Pos))) +#define SMC_SETUP_NCS_RD_SETUP_Pos 24 +#define SMC_SETUP_NCS_RD_SETUP_Msk (0x3fu << SMC_SETUP_NCS_RD_SETUP_Pos) /**< \brief (SMC_SETUP) NCS Setup Length in READ Access */ +#define SMC_SETUP_NCS_RD_SETUP(value) ((SMC_SETUP_NCS_RD_SETUP_Msk & ((value) << SMC_SETUP_NCS_RD_SETUP_Pos))) +/* -------- SMC_PULSE : (SMC Offset: N/A) SMC Pulse Register -------- */ +#define SMC_PULSE_NWE_PULSE_Pos 0 +#define SMC_PULSE_NWE_PULSE_Msk (0x7fu << SMC_PULSE_NWE_PULSE_Pos) /**< \brief (SMC_PULSE) NWE Pulse Length */ +#define SMC_PULSE_NWE_PULSE(value) ((SMC_PULSE_NWE_PULSE_Msk & ((value) << SMC_PULSE_NWE_PULSE_Pos))) +#define SMC_PULSE_NCS_WR_PULSE_Pos 8 +#define SMC_PULSE_NCS_WR_PULSE_Msk (0x7fu << SMC_PULSE_NCS_WR_PULSE_Pos) /**< \brief (SMC_PULSE) NCS Pulse Length in WRITE Access */ +#define SMC_PULSE_NCS_WR_PULSE(value) ((SMC_PULSE_NCS_WR_PULSE_Msk & ((value) << SMC_PULSE_NCS_WR_PULSE_Pos))) +#define SMC_PULSE_NRD_PULSE_Pos 16 +#define SMC_PULSE_NRD_PULSE_Msk (0x7fu << SMC_PULSE_NRD_PULSE_Pos) /**< \brief (SMC_PULSE) NRD Pulse Length */ +#define SMC_PULSE_NRD_PULSE(value) ((SMC_PULSE_NRD_PULSE_Msk & ((value) << SMC_PULSE_NRD_PULSE_Pos))) +#define SMC_PULSE_NCS_RD_PULSE_Pos 24 +#define SMC_PULSE_NCS_RD_PULSE_Msk (0x7fu << SMC_PULSE_NCS_RD_PULSE_Pos) /**< \brief (SMC_PULSE) NCS Pulse Length in READ Access */ +#define SMC_PULSE_NCS_RD_PULSE(value) ((SMC_PULSE_NCS_RD_PULSE_Msk & ((value) << SMC_PULSE_NCS_RD_PULSE_Pos))) +/* -------- SMC_CYCLE : (SMC Offset: N/A) SMC Cycle Register -------- */ +#define SMC_CYCLE_NWE_CYCLE_Pos 0 +#define SMC_CYCLE_NWE_CYCLE_Msk (0x1ffu << SMC_CYCLE_NWE_CYCLE_Pos) /**< \brief (SMC_CYCLE) Total Write Cycle Length */ +#define SMC_CYCLE_NWE_CYCLE(value) ((SMC_CYCLE_NWE_CYCLE_Msk & ((value) << SMC_CYCLE_NWE_CYCLE_Pos))) +#define SMC_CYCLE_NRD_CYCLE_Pos 16 +#define SMC_CYCLE_NRD_CYCLE_Msk (0x1ffu << SMC_CYCLE_NRD_CYCLE_Pos) /**< \brief (SMC_CYCLE) Total Read Cycle Length */ +#define SMC_CYCLE_NRD_CYCLE(value) ((SMC_CYCLE_NRD_CYCLE_Msk & ((value) << SMC_CYCLE_NRD_CYCLE_Pos))) +/* -------- SMC_MODE : (SMC Offset: N/A) SMC Mode Register -------- */ +#define SMC_MODE_READ_MODE (0x1u << 0) /**< \brief (SMC_MODE) */ +#define SMC_MODE_WRITE_MODE (0x1u << 1) /**< \brief (SMC_MODE) */ +#define SMC_MODE_EXNW_MODE_Pos 4 +#define SMC_MODE_EXNW_MODE_Msk (0x3u << SMC_MODE_EXNW_MODE_Pos) /**< \brief (SMC_MODE) NWAIT Mode */ +#define SMC_MODE_EXNW_MODE_DISABLED (0x0u << 4) /**< \brief (SMC_MODE) Disabled */ +#define SMC_MODE_EXNW_MODE_FROZEN (0x2u << 4) /**< \brief (SMC_MODE) Frozen Mode */ +#define SMC_MODE_EXNW_MODE_READY (0x3u << 4) /**< \brief (SMC_MODE) Ready Mode */ +#define SMC_MODE_DBW_Pos 12 +#define SMC_MODE_DBW_Msk (0x3u << SMC_MODE_DBW_Pos) /**< \brief (SMC_MODE) Data Bus Width */ +#define SMC_MODE_DBW_8_BIT (0x0u << 12) /**< \brief (SMC_MODE) 8-bit bus */ +#define SMC_MODE_DBW_16_BIT (0x1u << 12) /**< \brief (SMC_MODE) 16-bit bus */ +#define SMC_MODE_DBW_32_BIT (0x2u << 12) /**< \brief (SMC_MODE) 32-bit bus */ +#define SMC_MODE_TDF_CYCLES_Pos 16 +#define SMC_MODE_TDF_CYCLES_Msk (0xfu << SMC_MODE_TDF_CYCLES_Pos) /**< \brief (SMC_MODE) Data Float Time */ +#define SMC_MODE_TDF_CYCLES(value) ((SMC_MODE_TDF_CYCLES_Msk & ((value) << SMC_MODE_TDF_CYCLES_Pos))) +#define SMC_MODE_TDF_MODE (0x1u << 20) /**< \brief (SMC_MODE) TDF Optimization */ +#define SMC_MODE_PMEN (0x1u << 24) /**< \brief (SMC_MODE) Page Mode Enabled */ +#define SMC_MODE_PS_Pos 28 +#define SMC_MODE_PS_Msk (0x3u << SMC_MODE_PS_Pos) /**< \brief (SMC_MODE) Page Size */ +#define SMC_MODE_PS_4_BYTE (0x0u << 28) /**< \brief (SMC_MODE) 4-byte page */ +#define SMC_MODE_PS_8_BYTE (0x1u << 28) /**< \brief (SMC_MODE) 8-byte page */ +#define SMC_MODE_PS_16_BYTE (0x2u << 28) /**< \brief (SMC_MODE) 16-byte page */ +#define SMC_MODE_PS_32_BYTE (0x3u << 28) /**< \brief (SMC_MODE) 32-byte page */ +/* -------- SMC_OCMS : (SMC Offset: 0x80) SMC OCMS MODE Register -------- */ +#define SMC_OCMS_SMSE (0x1u << 0) /**< \brief (SMC_OCMS) Static Memory Controller Scrambling Enable */ +#define SMC_OCMS_CS0SE (0x1u << 16) /**< \brief (SMC_OCMS) Chip Select (x = 0 to 3) Scrambling Enable */ +#define SMC_OCMS_CS1SE (0x1u << 17) /**< \brief (SMC_OCMS) Chip Select (x = 0 to 3) Scrambling Enable */ +#define SMC_OCMS_CS2SE (0x1u << 18) /**< \brief (SMC_OCMS) Chip Select (x = 0 to 3) Scrambling Enable */ +#define SMC_OCMS_CS3SE (0x1u << 19) /**< \brief (SMC_OCMS) Chip Select (x = 0 to 3) Scrambling Enable */ +/* -------- SMC_KEY1 : (SMC Offset: 0x84) SMC OCMS KEY1 Register -------- */ +#define SMC_KEY1_KEY1_Pos 0 +#define SMC_KEY1_KEY1_Msk (0xffffffffu << SMC_KEY1_KEY1_Pos) /**< \brief (SMC_KEY1) Off Chip Memory Scrambling (OCMS) Key Part 1 */ +#define SMC_KEY1_KEY1(value) ((SMC_KEY1_KEY1_Msk & ((value) << SMC_KEY1_KEY1_Pos))) +/* -------- SMC_KEY2 : (SMC Offset: 0x88) SMC OCMS KEY2 Register -------- */ +#define SMC_KEY2_KEY2_Pos 0 +#define SMC_KEY2_KEY2_Msk (0xffffffffu << SMC_KEY2_KEY2_Pos) /**< \brief (SMC_KEY2) Off Chip Memory Scrambling (OCMS) Key Part 2 */ +#define SMC_KEY2_KEY2(value) ((SMC_KEY2_KEY2_Msk & ((value) << SMC_KEY2_KEY2_Pos))) +/* -------- SMC_WPMR : (SMC Offset: 0xE4) SMC Write Protect Mode Register -------- */ +#define SMC_WPMR_WPEN (0x1u << 0) /**< \brief (SMC_WPMR) Write Protect Enable */ +#define SMC_WPMR_WPKEY_Pos 8 +#define SMC_WPMR_WPKEY_Msk (0xffffffu << SMC_WPMR_WPKEY_Pos) /**< \brief (SMC_WPMR) Write Protect KEY */ +#define SMC_WPMR_WPKEY(value) ((SMC_WPMR_WPKEY_Msk & ((value) << SMC_WPMR_WPKEY_Pos))) +/* -------- SMC_WPSR : (SMC Offset: 0xE8) SMC Write Protect Status Register -------- */ +#define SMC_WPSR_WPVS (0x1u << 0) /**< \brief (SMC_WPSR) Write Protect Enable */ +#define SMC_WPSR_WPVSRC_Pos 8 +#define SMC_WPSR_WPVSRC_Msk (0xffffu << SMC_WPSR_WPVSRC_Pos) /**< \brief (SMC_WPSR) Write Protect Violation Source */ + +/*@}*/ + + +#endif /* _SAM4S_SMC_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_spi.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_spi.h new file mode 100644 index 0000000..e4daea6 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_spi.h
@@ -0,0 +1,238 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_SPI_COMPONENT_ +#define _SAM4S_SPI_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Serial Peripheral Interface */ +/* ============================================================================= */ +/** \addtogroup SAM4S_SPI Serial Peripheral Interface */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Spi hardware registers */ +typedef struct { + WoReg SPI_CR; /**< \brief (Spi Offset: 0x00) Control Register */ + RwReg SPI_MR; /**< \brief (Spi Offset: 0x04) Mode Register */ + RoReg SPI_RDR; /**< \brief (Spi Offset: 0x08) Receive Data Register */ + WoReg SPI_TDR; /**< \brief (Spi Offset: 0x0C) Transmit Data Register */ + RoReg SPI_SR; /**< \brief (Spi Offset: 0x10) Status Register */ + WoReg SPI_IER; /**< \brief (Spi Offset: 0x14) Interrupt Enable Register */ + WoReg SPI_IDR; /**< \brief (Spi Offset: 0x18) Interrupt Disable Register */ + RoReg SPI_IMR; /**< \brief (Spi Offset: 0x1C) Interrupt Mask Register */ + RoReg Reserved1[4]; + RwReg SPI_CSR[4]; /**< \brief (Spi Offset: 0x30) Chip Select Register */ + RoReg Reserved2[41]; + RwReg SPI_WPMR; /**< \brief (Spi Offset: 0xE4) Write Protection Control Register */ + RoReg SPI_WPSR; /**< \brief (Spi Offset: 0xE8) Write Protection Status Register */ + RoReg Reserved3[5]; + RwReg SPI_RPR; /**< \brief (Spi Offset: 0x100) Receive Pointer Register */ + RwReg SPI_RCR; /**< \brief (Spi Offset: 0x104) Receive Counter Register */ + RwReg SPI_TPR; /**< \brief (Spi Offset: 0x108) Transmit Pointer Register */ + RwReg SPI_TCR; /**< \brief (Spi Offset: 0x10C) Transmit Counter Register */ + RwReg SPI_RNPR; /**< \brief (Spi Offset: 0x110) Receive Next Pointer Register */ + RwReg SPI_RNCR; /**< \brief (Spi Offset: 0x114) Receive Next Counter Register */ + RwReg SPI_TNPR; /**< \brief (Spi Offset: 0x118) Transmit Next Pointer Register */ + RwReg SPI_TNCR; /**< \brief (Spi Offset: 0x11C) Transmit Next Counter Register */ + WoReg SPI_PTCR; /**< \brief (Spi Offset: 0x120) Transfer Control Register */ + RoReg SPI_PTSR; /**< \brief (Spi Offset: 0x124) Transfer Status Register */ +} Spi; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- SPI_CR : (SPI Offset: 0x00) Control Register -------- */ +#define SPI_CR_SPIEN (0x1u << 0) /**< \brief (SPI_CR) SPI Enable */ +#define SPI_CR_SPIDIS (0x1u << 1) /**< \brief (SPI_CR) SPI Disable */ +#define SPI_CR_SWRST (0x1u << 7) /**< \brief (SPI_CR) SPI Software Reset */ +#define SPI_CR_LASTXFER (0x1u << 24) /**< \brief (SPI_CR) Last Transfer */ +/* -------- SPI_MR : (SPI Offset: 0x04) Mode Register -------- */ +#define SPI_MR_MSTR (0x1u << 0) /**< \brief (SPI_MR) Master/Slave Mode */ +#define SPI_MR_PS (0x1u << 1) /**< \brief (SPI_MR) Peripheral Select */ +#define SPI_MR_PCSDEC (0x1u << 2) /**< \brief (SPI_MR) Chip Select Decode */ +#define SPI_MR_MODFDIS (0x1u << 4) /**< \brief (SPI_MR) Mode Fault Detection */ +#define SPI_MR_WDRBT (0x1u << 5) /**< \brief (SPI_MR) Wait Data Read Before Transfer */ +#define SPI_MR_LLB (0x1u << 7) /**< \brief (SPI_MR) Local Loopback Enable */ +#define SPI_MR_PCS_Pos 16 +#define SPI_MR_PCS_Msk (0xfu << SPI_MR_PCS_Pos) /**< \brief (SPI_MR) Peripheral Chip Select */ +#define SPI_MR_PCS(value) ((SPI_MR_PCS_Msk & ((value) << SPI_MR_PCS_Pos))) +#define SPI_MR_DLYBCS_Pos 24 +#define SPI_MR_DLYBCS_Msk (0xffu << SPI_MR_DLYBCS_Pos) /**< \brief (SPI_MR) Delay Between Chip Selects */ +#define SPI_MR_DLYBCS(value) ((SPI_MR_DLYBCS_Msk & ((value) << SPI_MR_DLYBCS_Pos))) +/* -------- SPI_RDR : (SPI Offset: 0x08) Receive Data Register -------- */ +#define SPI_RDR_RD_Pos 0 +#define SPI_RDR_RD_Msk (0xffffu << SPI_RDR_RD_Pos) /**< \brief (SPI_RDR) Receive Data */ +#define SPI_RDR_PCS_Pos 16 +#define SPI_RDR_PCS_Msk (0xfu << SPI_RDR_PCS_Pos) /**< \brief (SPI_RDR) Peripheral Chip Select */ +/* -------- SPI_TDR : (SPI Offset: 0x0C) Transmit Data Register -------- */ +#define SPI_TDR_TD_Pos 0 +#define SPI_TDR_TD_Msk (0xffffu << SPI_TDR_TD_Pos) /**< \brief (SPI_TDR) Transmit Data */ +#define SPI_TDR_TD(value) ((SPI_TDR_TD_Msk & ((value) << SPI_TDR_TD_Pos))) +#define SPI_TDR_PCS_Pos 16 +#define SPI_TDR_PCS_Msk (0xfu << SPI_TDR_PCS_Pos) /**< \brief (SPI_TDR) Peripheral Chip Select */ +#define SPI_TDR_PCS(value) ((SPI_TDR_PCS_Msk & ((value) << SPI_TDR_PCS_Pos))) +#define SPI_TDR_LASTXFER (0x1u << 24) /**< \brief (SPI_TDR) Last Transfer */ +/* -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- */ +#define SPI_SR_RDRF (0x1u << 0) /**< \brief (SPI_SR) Receive Data Register Full */ +#define SPI_SR_TDRE (0x1u << 1) /**< \brief (SPI_SR) Transmit Data Register Empty */ +#define SPI_SR_MODF (0x1u << 2) /**< \brief (SPI_SR) Mode Fault Error */ +#define SPI_SR_OVRES (0x1u << 3) /**< \brief (SPI_SR) Overrun Error Status */ +#define SPI_SR_ENDRX (0x1u << 4) /**< \brief (SPI_SR) End of RX buffer */ +#define SPI_SR_ENDTX (0x1u << 5) /**< \brief (SPI_SR) End of TX buffer */ +#define SPI_SR_RXBUFF (0x1u << 6) /**< \brief (SPI_SR) RX Buffer Full */ +#define SPI_SR_TXBUFE (0x1u << 7) /**< \brief (SPI_SR) TX Buffer Empty */ +#define SPI_SR_NSSR (0x1u << 8) /**< \brief (SPI_SR) NSS Rising */ +#define SPI_SR_TXEMPTY (0x1u << 9) /**< \brief (SPI_SR) Transmission Registers Empty */ +#define SPI_SR_UNDES (0x1u << 10) /**< \brief (SPI_SR) Underrun Error Status (Slave Mode Only) */ +#define SPI_SR_SPIENS (0x1u << 16) /**< \brief (SPI_SR) SPI Enable Status */ +/* -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- */ +#define SPI_IER_RDRF (0x1u << 0) /**< \brief (SPI_IER) Receive Data Register Full Interrupt Enable */ +#define SPI_IER_TDRE (0x1u << 1) /**< \brief (SPI_IER) SPI Transmit Data Register Empty Interrupt Enable */ +#define SPI_IER_MODF (0x1u << 2) /**< \brief (SPI_IER) Mode Fault Error Interrupt Enable */ +#define SPI_IER_OVRES (0x1u << 3) /**< \brief (SPI_IER) Overrun Error Interrupt Enable */ +#define SPI_IER_ENDRX (0x1u << 4) /**< \brief (SPI_IER) End of Receive Buffer Interrupt Enable */ +#define SPI_IER_ENDTX (0x1u << 5) /**< \brief (SPI_IER) End of Transmit Buffer Interrupt Enable */ +#define SPI_IER_RXBUFF (0x1u << 6) /**< \brief (SPI_IER) Receive Buffer Full Interrupt Enable */ +#define SPI_IER_TXBUFE (0x1u << 7) /**< \brief (SPI_IER) Transmit Buffer Empty Interrupt Enable */ +#define SPI_IER_NSSR (0x1u << 8) /**< \brief (SPI_IER) NSS Rising Interrupt Enable */ +#define SPI_IER_TXEMPTY (0x1u << 9) /**< \brief (SPI_IER) Transmission Registers Empty Enable */ +#define SPI_IER_UNDES (0x1u << 10) /**< \brief (SPI_IER) Underrun Error Interrupt Enable */ +/* -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- */ +#define SPI_IDR_RDRF (0x1u << 0) /**< \brief (SPI_IDR) Receive Data Register Full Interrupt Disable */ +#define SPI_IDR_TDRE (0x1u << 1) /**< \brief (SPI_IDR) SPI Transmit Data Register Empty Interrupt Disable */ +#define SPI_IDR_MODF (0x1u << 2) /**< \brief (SPI_IDR) Mode Fault Error Interrupt Disable */ +#define SPI_IDR_OVRES (0x1u << 3) /**< \brief (SPI_IDR) Overrun Error Interrupt Disable */ +#define SPI_IDR_ENDRX (0x1u << 4) /**< \brief (SPI_IDR) End of Receive Buffer Interrupt Disable */ +#define SPI_IDR_ENDTX (0x1u << 5) /**< \brief (SPI_IDR) End of Transmit Buffer Interrupt Disable */ +#define SPI_IDR_RXBUFF (0x1u << 6) /**< \brief (SPI_IDR) Receive Buffer Full Interrupt Disable */ +#define SPI_IDR_TXBUFE (0x1u << 7) /**< \brief (SPI_IDR) Transmit Buffer Empty Interrupt Disable */ +#define SPI_IDR_NSSR (0x1u << 8) /**< \brief (SPI_IDR) NSS Rising Interrupt Disable */ +#define SPI_IDR_TXEMPTY (0x1u << 9) /**< \brief (SPI_IDR) Transmission Registers Empty Disable */ +#define SPI_IDR_UNDES (0x1u << 10) /**< \brief (SPI_IDR) Underrun Error Interrupt Disable */ +/* -------- SPI_IMR : (SPI Offset: 0x1C) Interrupt Mask Register -------- */ +#define SPI_IMR_RDRF (0x1u << 0) /**< \brief (SPI_IMR) Receive Data Register Full Interrupt Mask */ +#define SPI_IMR_TDRE (0x1u << 1) /**< \brief (SPI_IMR) SPI Transmit Data Register Empty Interrupt Mask */ +#define SPI_IMR_MODF (0x1u << 2) /**< \brief (SPI_IMR) Mode Fault Error Interrupt Mask */ +#define SPI_IMR_OVRES (0x1u << 3) /**< \brief (SPI_IMR) Overrun Error Interrupt Mask */ +#define SPI_IMR_ENDRX (0x1u << 4) /**< \brief (SPI_IMR) End of Receive Buffer Interrupt Mask */ +#define SPI_IMR_ENDTX (0x1u << 5) /**< \brief (SPI_IMR) End of Transmit Buffer Interrupt Mask */ +#define SPI_IMR_RXBUFF (0x1u << 6) /**< \brief (SPI_IMR) Receive Buffer Full Interrupt Mask */ +#define SPI_IMR_TXBUFE (0x1u << 7) /**< \brief (SPI_IMR) Transmit Buffer Empty Interrupt Mask */ +#define SPI_IMR_NSSR (0x1u << 8) /**< \brief (SPI_IMR) NSS Rising Interrupt Mask */ +#define SPI_IMR_TXEMPTY (0x1u << 9) /**< \brief (SPI_IMR) Transmission Registers Empty Mask */ +#define SPI_IMR_UNDES (0x1u << 10) /**< \brief (SPI_IMR) Underrun Error Interrupt Mask */ +/* -------- SPI_CSR[4] : (SPI Offset: 0x30) Chip Select Register -------- */ +#define SPI_CSR_CPOL (0x1u << 0) /**< \brief (SPI_CSR[4]) Clock Polarity */ +#define SPI_CSR_NCPHA (0x1u << 1) /**< \brief (SPI_CSR[4]) Clock Phase */ +#define SPI_CSR_CSNAAT (0x1u << 2) /**< \brief (SPI_CSR[4]) Chip Select Not Active After Transfer (Ignored if CSAAT = 1) */ +#define SPI_CSR_CSAAT (0x1u << 3) /**< \brief (SPI_CSR[4]) Chip Select Not Active After Transfer (Ignored if CSAAT = 1) */ +#define SPI_CSR_BITS_Pos 4 +#define SPI_CSR_BITS_Msk (0xfu << SPI_CSR_BITS_Pos) /**< \brief (SPI_CSR[4]) Bits Per Transfer */ +#define SPI_CSR_BITS_8_BIT (0x0u << 4) /**< \brief (SPI_CSR[4]) 8 bits for transfer */ +#define SPI_CSR_BITS_9_BIT (0x1u << 4) /**< \brief (SPI_CSR[4]) 9 bits for transfer */ +#define SPI_CSR_BITS_10_BIT (0x2u << 4) /**< \brief (SPI_CSR[4]) 10 bits for transfer */ +#define SPI_CSR_BITS_11_BIT (0x3u << 4) /**< \brief (SPI_CSR[4]) 11 bits for transfer */ +#define SPI_CSR_BITS_12_BIT (0x4u << 4) /**< \brief (SPI_CSR[4]) 12 bits for transfer */ +#define SPI_CSR_BITS_13_BIT (0x5u << 4) /**< \brief (SPI_CSR[4]) 13 bits for transfer */ +#define SPI_CSR_BITS_14_BIT (0x6u << 4) /**< \brief (SPI_CSR[4]) 14 bits for transfer */ +#define SPI_CSR_BITS_15_BIT (0x7u << 4) /**< \brief (SPI_CSR[4]) 15 bits for transfer */ +#define SPI_CSR_BITS_16_BIT (0x8u << 4) /**< \brief (SPI_CSR[4]) 16 bits for transfer */ +#define SPI_CSR_SCBR_Pos 8 +#define SPI_CSR_SCBR_Msk (0xffu << SPI_CSR_SCBR_Pos) /**< \brief (SPI_CSR[4]) Serial Clock Baud Rate */ +#define SPI_CSR_SCBR(value) ((SPI_CSR_SCBR_Msk & ((value) << SPI_CSR_SCBR_Pos))) +#define SPI_CSR_DLYBS_Pos 16 +#define SPI_CSR_DLYBS_Msk (0xffu << SPI_CSR_DLYBS_Pos) /**< \brief (SPI_CSR[4]) Delay Before SPCK */ +#define SPI_CSR_DLYBS(value) ((SPI_CSR_DLYBS_Msk & ((value) << SPI_CSR_DLYBS_Pos))) +#define SPI_CSR_DLYBCT_Pos 24 +#define SPI_CSR_DLYBCT_Msk (0xffu << SPI_CSR_DLYBCT_Pos) /**< \brief (SPI_CSR[4]) Delay Between Consecutive Transfers */ +#define SPI_CSR_DLYBCT(value) ((SPI_CSR_DLYBCT_Msk & ((value) << SPI_CSR_DLYBCT_Pos))) +/* -------- SPI_WPMR : (SPI Offset: 0xE4) Write Protection Control Register -------- */ +#define SPI_WPMR_WPEN (0x1u << 0) /**< \brief (SPI_WPMR) Write Protection Enable */ +#define SPI_WPMR_WPKEY_Pos 8 +#define SPI_WPMR_WPKEY_Msk (0xffffffu << SPI_WPMR_WPKEY_Pos) /**< \brief (SPI_WPMR) Write Protection Key Password */ +#define SPI_WPMR_WPKEY(value) ((SPI_WPMR_WPKEY_Msk & ((value) << SPI_WPMR_WPKEY_Pos))) +/* -------- SPI_WPSR : (SPI Offset: 0xE8) Write Protection Status Register -------- */ +#define SPI_WPSR_WPVS (0x1u << 0) /**< \brief (SPI_WPSR) Write Protection Violation Status */ +#define SPI_WPSR_WPVS_Pos 0 +#define SPI_WPSR_WPVS_Msk (0x1u << SPI_WPSR_WPVS_Pos) /**< \brief (SPI_WPSR) Write Protection Violation Status */ +#define SPI_WPSR_WPVSRC_Pos 8 +#define SPI_WPSR_WPVSRC_Msk (0xffu << SPI_WPSR_WPVSRC_Pos) /**< \brief (SPI_WPSR) Write Protection Violation Source */ +/* -------- SPI_RPR : (SPI Offset: 0x100) Receive Pointer Register -------- */ +#define SPI_RPR_RXPTR_Pos 0 +#define SPI_RPR_RXPTR_Msk (0xffffffffu << SPI_RPR_RXPTR_Pos) /**< \brief (SPI_RPR) Receive Pointer Register */ +#define SPI_RPR_RXPTR(value) ((SPI_RPR_RXPTR_Msk & ((value) << SPI_RPR_RXPTR_Pos))) +/* -------- SPI_RCR : (SPI Offset: 0x104) Receive Counter Register -------- */ +#define SPI_RCR_RXCTR_Pos 0 +#define SPI_RCR_RXCTR_Msk (0xffffu << SPI_RCR_RXCTR_Pos) /**< \brief (SPI_RCR) Receive Counter Register */ +#define SPI_RCR_RXCTR(value) ((SPI_RCR_RXCTR_Msk & ((value) << SPI_RCR_RXCTR_Pos))) +/* -------- SPI_TPR : (SPI Offset: 0x108) Transmit Pointer Register -------- */ +#define SPI_TPR_TXPTR_Pos 0 +#define SPI_TPR_TXPTR_Msk (0xffffffffu << SPI_TPR_TXPTR_Pos) /**< \brief (SPI_TPR) Transmit Counter Register */ +#define SPI_TPR_TXPTR(value) ((SPI_TPR_TXPTR_Msk & ((value) << SPI_TPR_TXPTR_Pos))) +/* -------- SPI_TCR : (SPI Offset: 0x10C) Transmit Counter Register -------- */ +#define SPI_TCR_TXCTR_Pos 0 +#define SPI_TCR_TXCTR_Msk (0xffffu << SPI_TCR_TXCTR_Pos) /**< \brief (SPI_TCR) Transmit Counter Register */ +#define SPI_TCR_TXCTR(value) ((SPI_TCR_TXCTR_Msk & ((value) << SPI_TCR_TXCTR_Pos))) +/* -------- SPI_RNPR : (SPI Offset: 0x110) Receive Next Pointer Register -------- */ +#define SPI_RNPR_RXNPTR_Pos 0 +#define SPI_RNPR_RXNPTR_Msk (0xffffffffu << SPI_RNPR_RXNPTR_Pos) /**< \brief (SPI_RNPR) Receive Next Pointer */ +#define SPI_RNPR_RXNPTR(value) ((SPI_RNPR_RXNPTR_Msk & ((value) << SPI_RNPR_RXNPTR_Pos))) +/* -------- SPI_RNCR : (SPI Offset: 0x114) Receive Next Counter Register -------- */ +#define SPI_RNCR_RXNCTR_Pos 0 +#define SPI_RNCR_RXNCTR_Msk (0xffffu << SPI_RNCR_RXNCTR_Pos) /**< \brief (SPI_RNCR) Receive Next Counter */ +#define SPI_RNCR_RXNCTR(value) ((SPI_RNCR_RXNCTR_Msk & ((value) << SPI_RNCR_RXNCTR_Pos))) +/* -------- SPI_TNPR : (SPI Offset: 0x118) Transmit Next Pointer Register -------- */ +#define SPI_TNPR_TXNPTR_Pos 0 +#define SPI_TNPR_TXNPTR_Msk (0xffffffffu << SPI_TNPR_TXNPTR_Pos) /**< \brief (SPI_TNPR) Transmit Next Pointer */ +#define SPI_TNPR_TXNPTR(value) ((SPI_TNPR_TXNPTR_Msk & ((value) << SPI_TNPR_TXNPTR_Pos))) +/* -------- SPI_TNCR : (SPI Offset: 0x11C) Transmit Next Counter Register -------- */ +#define SPI_TNCR_TXNCTR_Pos 0 +#define SPI_TNCR_TXNCTR_Msk (0xffffu << SPI_TNCR_TXNCTR_Pos) /**< \brief (SPI_TNCR) Transmit Counter Next */ +#define SPI_TNCR_TXNCTR(value) ((SPI_TNCR_TXNCTR_Msk & ((value) << SPI_TNCR_TXNCTR_Pos))) +/* -------- SPI_PTCR : (SPI Offset: 0x120) Transfer Control Register -------- */ +#define SPI_PTCR_RXTEN (0x1u << 0) /**< \brief (SPI_PTCR) Receiver Transfer Enable */ +#define SPI_PTCR_RXTDIS (0x1u << 1) /**< \brief (SPI_PTCR) Receiver Transfer Disable */ +#define SPI_PTCR_TXTEN (0x1u << 8) /**< \brief (SPI_PTCR) Transmitter Transfer Enable */ +#define SPI_PTCR_TXTDIS (0x1u << 9) /**< \brief (SPI_PTCR) Transmitter Transfer Disable */ +/* -------- SPI_PTSR : (SPI Offset: 0x124) Transfer Status Register -------- */ +#define SPI_PTSR_RXTEN (0x1u << 0) /**< \brief (SPI_PTSR) Receiver Transfer Enable */ +#define SPI_PTSR_TXTEN (0x1u << 8) /**< \brief (SPI_PTSR) Transmitter Transfer Enable */ + +/*@}*/ + + +#endif /* _SAM4S_SPI_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_ssc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_ssc.h new file mode 100644 index 0000000..ced3b8d --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_ssc.h
@@ -0,0 +1,347 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_SSC_COMPONENT_ +#define _SAM4S_SSC_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Synchronous Serial Controller */ +/* ============================================================================= */ +/** \addtogroup SAM4S_SSC Synchronous Serial Controller */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Ssc hardware registers */ +typedef struct { + WoReg SSC_CR; /**< \brief (Ssc Offset: 0x0) Control Register */ + RwReg SSC_CMR; /**< \brief (Ssc Offset: 0x4) Clock Mode Register */ + RoReg Reserved1[2]; + RwReg SSC_RCMR; /**< \brief (Ssc Offset: 0x10) Receive Clock Mode Register */ + RwReg SSC_RFMR; /**< \brief (Ssc Offset: 0x14) Receive Frame Mode Register */ + RwReg SSC_TCMR; /**< \brief (Ssc Offset: 0x18) Transmit Clock Mode Register */ + RwReg SSC_TFMR; /**< \brief (Ssc Offset: 0x1C) Transmit Frame Mode Register */ + RoReg SSC_RHR; /**< \brief (Ssc Offset: 0x20) Receive Holding Register */ + WoReg SSC_THR; /**< \brief (Ssc Offset: 0x24) Transmit Holding Register */ + RoReg Reserved2[2]; + RoReg SSC_RSHR; /**< \brief (Ssc Offset: 0x30) Receive Sync. Holding Register */ + RwReg SSC_TSHR; /**< \brief (Ssc Offset: 0x34) Transmit Sync. Holding Register */ + RwReg SSC_RC0R; /**< \brief (Ssc Offset: 0x38) Receive Compare 0 Register */ + RwReg SSC_RC1R; /**< \brief (Ssc Offset: 0x3C) Receive Compare 1 Register */ + RoReg SSC_SR; /**< \brief (Ssc Offset: 0x40) Status Register */ + WoReg SSC_IER; /**< \brief (Ssc Offset: 0x44) Interrupt Enable Register */ + WoReg SSC_IDR; /**< \brief (Ssc Offset: 0x48) Interrupt Disable Register */ + RoReg SSC_IMR; /**< \brief (Ssc Offset: 0x4C) Interrupt Mask Register */ + RoReg Reserved3[37]; + RwReg SSC_WPMR; /**< \brief (Ssc Offset: 0xE4) Write Protect Mode Register */ + RoReg SSC_WPSR; /**< \brief (Ssc Offset: 0xE8) Write Protect Status Register */ + RoReg Reserved4[5]; + RwReg SSC_RPR; /**< \brief (Ssc Offset: 0x100) Receive Pointer Register */ + RwReg SSC_RCR; /**< \brief (Ssc Offset: 0x104) Receive Counter Register */ + RwReg SSC_TPR; /**< \brief (Ssc Offset: 0x108) Transmit Pointer Register */ + RwReg SSC_TCR; /**< \brief (Ssc Offset: 0x10C) Transmit Counter Register */ + RwReg SSC_RNPR; /**< \brief (Ssc Offset: 0x110) Receive Next Pointer Register */ + RwReg SSC_RNCR; /**< \brief (Ssc Offset: 0x114) Receive Next Counter Register */ + RwReg SSC_TNPR; /**< \brief (Ssc Offset: 0x118) Transmit Next Pointer Register */ + RwReg SSC_TNCR; /**< \brief (Ssc Offset: 0x11C) Transmit Next Counter Register */ + WoReg SSC_PTCR; /**< \brief (Ssc Offset: 0x120) Transfer Control Register */ + RoReg SSC_PTSR; /**< \brief (Ssc Offset: 0x124) Transfer Status Register */ +} Ssc; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- SSC_CR : (SSC Offset: 0x0) Control Register -------- */ +#define SSC_CR_RXEN (0x1u << 0) /**< \brief (SSC_CR) Receive Enable */ +#define SSC_CR_RXDIS (0x1u << 1) /**< \brief (SSC_CR) Receive Disable */ +#define SSC_CR_TXEN (0x1u << 8) /**< \brief (SSC_CR) Transmit Enable */ +#define SSC_CR_TXDIS (0x1u << 9) /**< \brief (SSC_CR) Transmit Disable */ +#define SSC_CR_SWRST (0x1u << 15) /**< \brief (SSC_CR) Software Reset */ +/* -------- SSC_CMR : (SSC Offset: 0x4) Clock Mode Register -------- */ +#define SSC_CMR_DIV_Pos 0 +#define SSC_CMR_DIV_Msk (0xfffu << SSC_CMR_DIV_Pos) /**< \brief (SSC_CMR) Clock Divider */ +#define SSC_CMR_DIV(value) ((SSC_CMR_DIV_Msk & ((value) << SSC_CMR_DIV_Pos))) +/* -------- SSC_RCMR : (SSC Offset: 0x10) Receive Clock Mode Register -------- */ +#define SSC_RCMR_CKS_Pos 0 +#define SSC_RCMR_CKS_Msk (0x3u << SSC_RCMR_CKS_Pos) /**< \brief (SSC_RCMR) Receive Clock Selection */ +#define SSC_RCMR_CKS_MCK (0x0u << 0) /**< \brief (SSC_RCMR) Divided Clock */ +#define SSC_RCMR_CKS_TK (0x1u << 0) /**< \brief (SSC_RCMR) TK Clock signal */ +#define SSC_RCMR_CKS_RK (0x2u << 0) /**< \brief (SSC_RCMR) RK pin */ +#define SSC_RCMR_CKO_Pos 2 +#define SSC_RCMR_CKO_Msk (0x7u << SSC_RCMR_CKO_Pos) /**< \brief (SSC_RCMR) Receive Clock Output Mode Selection */ +#define SSC_RCMR_CKO_NONE (0x0u << 2) /**< \brief (SSC_RCMR) None */ +#define SSC_RCMR_CKO_CONTINUOUS (0x1u << 2) /**< \brief (SSC_RCMR) Continuous Receive Clock */ +#define SSC_RCMR_CKO_TRANSFER (0x2u << 2) /**< \brief (SSC_RCMR) Receive Clock only during data transfers */ +#define SSC_RCMR_CKI (0x1u << 5) /**< \brief (SSC_RCMR) Receive Clock Inversion */ +#define SSC_RCMR_CKG_Pos 6 +#define SSC_RCMR_CKG_Msk (0x3u << SSC_RCMR_CKG_Pos) /**< \brief (SSC_RCMR) Receive Clock Gating Selection */ +#define SSC_RCMR_CKG_NONE (0x0u << 6) /**< \brief (SSC_RCMR) None */ +#define SSC_RCMR_CKG_CONTINUOUS (0x1u << 6) /**< \brief (SSC_RCMR) Continuous Receive Clock */ +#define SSC_RCMR_CKG_TRANSFER (0x2u << 6) /**< \brief (SSC_RCMR) Receive Clock only during data transfers */ +#define SSC_RCMR_START_Pos 8 +#define SSC_RCMR_START_Msk (0xfu << SSC_RCMR_START_Pos) /**< \brief (SSC_RCMR) Receive Start Selection */ +#define SSC_RCMR_START_CONTINUOUS (0x0u << 8) /**< \brief (SSC_RCMR) Continuous, as soon as the receiver is enabled, and immediately after the end of transfer of the previous data. */ +#define SSC_RCMR_START_TRANSMIT (0x1u << 8) /**< \brief (SSC_RCMR) Transmit start */ +#define SSC_RCMR_START_RF_LOW (0x2u << 8) /**< \brief (SSC_RCMR) Detection of a low level on RF signal */ +#define SSC_RCMR_START_RF_HIGH (0x3u << 8) /**< \brief (SSC_RCMR) Detection of a high level on RF signal */ +#define SSC_RCMR_START_RF_FALLING (0x4u << 8) /**< \brief (SSC_RCMR) Detection of a falling edge on RF signal */ +#define SSC_RCMR_START_RF_RISING (0x5u << 8) /**< \brief (SSC_RCMR) Detection of a rising edge on RF signal */ +#define SSC_RCMR_START_RF_LEVEL (0x6u << 8) /**< \brief (SSC_RCMR) Detection of any level change on RF signal */ +#define SSC_RCMR_START_RF_EDGE (0x7u << 8) /**< \brief (SSC_RCMR) Detection of any edge on RF signal */ +#define SSC_RCMR_START_CMP_0 (0x8u << 8) /**< \brief (SSC_RCMR) Compare 0 */ +#define SSC_RCMR_STOP (0x1u << 12) /**< \brief (SSC_RCMR) Receive Stop Selection */ +#define SSC_RCMR_STTDLY_Pos 16 +#define SSC_RCMR_STTDLY_Msk (0xffu << SSC_RCMR_STTDLY_Pos) /**< \brief (SSC_RCMR) Receive Start Delay */ +#define SSC_RCMR_STTDLY(value) ((SSC_RCMR_STTDLY_Msk & ((value) << SSC_RCMR_STTDLY_Pos))) +#define SSC_RCMR_PERIOD_Pos 24 +#define SSC_RCMR_PERIOD_Msk (0xffu << SSC_RCMR_PERIOD_Pos) /**< \brief (SSC_RCMR) Receive Period Divider Selection */ +#define SSC_RCMR_PERIOD(value) ((SSC_RCMR_PERIOD_Msk & ((value) << SSC_RCMR_PERIOD_Pos))) +/* -------- SSC_RFMR : (SSC Offset: 0x14) Receive Frame Mode Register -------- */ +#define SSC_RFMR_DATLEN_Pos 0 +#define SSC_RFMR_DATLEN_Msk (0x1fu << SSC_RFMR_DATLEN_Pos) /**< \brief (SSC_RFMR) Data Length */ +#define SSC_RFMR_DATLEN(value) ((SSC_RFMR_DATLEN_Msk & ((value) << SSC_RFMR_DATLEN_Pos))) +#define SSC_RFMR_LOOP (0x1u << 5) /**< \brief (SSC_RFMR) Loop Mode */ +#define SSC_RFMR_MSBF (0x1u << 7) /**< \brief (SSC_RFMR) Most Significant Bit First */ +#define SSC_RFMR_DATNB_Pos 8 +#define SSC_RFMR_DATNB_Msk (0xfu << SSC_RFMR_DATNB_Pos) /**< \brief (SSC_RFMR) Data Number per Frame */ +#define SSC_RFMR_DATNB(value) ((SSC_RFMR_DATNB_Msk & ((value) << SSC_RFMR_DATNB_Pos))) +#define SSC_RFMR_FSLEN_Pos 16 +#define SSC_RFMR_FSLEN_Msk (0xfu << SSC_RFMR_FSLEN_Pos) /**< \brief (SSC_RFMR) Receive Frame Sync Length */ +#define SSC_RFMR_FSLEN(value) ((SSC_RFMR_FSLEN_Msk & ((value) << SSC_RFMR_FSLEN_Pos))) +#define SSC_RFMR_FSOS_Pos 20 +#define SSC_RFMR_FSOS_Msk (0x7u << SSC_RFMR_FSOS_Pos) /**< \brief (SSC_RFMR) Receive Frame Sync Output Selection */ +#define SSC_RFMR_FSOS_NONE (0x0u << 20) /**< \brief (SSC_RFMR) None */ +#define SSC_RFMR_FSOS_NEGATIVE (0x1u << 20) /**< \brief (SSC_RFMR) Negative Pulse */ +#define SSC_RFMR_FSOS_POSITIVE (0x2u << 20) /**< \brief (SSC_RFMR) Positive Pulse */ +#define SSC_RFMR_FSOS_LOW (0x3u << 20) /**< \brief (SSC_RFMR) Driven Low during data transfer */ +#define SSC_RFMR_FSOS_HIGH (0x4u << 20) /**< \brief (SSC_RFMR) Driven High during data transfer */ +#define SSC_RFMR_FSOS_TOGGLING (0x5u << 20) /**< \brief (SSC_RFMR) Toggling at each start of data transfer */ +#define SSC_RFMR_FSEDGE (0x1u << 24) /**< \brief (SSC_RFMR) Frame Sync Edge Detection */ +#define SSC_RFMR_FSEDGE_POSITIVE (0x0u << 24) /**< \brief (SSC_RFMR) Positive Edge Detection */ +#define SSC_RFMR_FSEDGE_NEGATIVE (0x1u << 24) /**< \brief (SSC_RFMR) Negative Edge Detection */ +#define SSC_RFMR_FSLEN_EXT_Pos 28 +#define SSC_RFMR_FSLEN_EXT_Msk (0xfu << SSC_RFMR_FSLEN_EXT_Pos) /**< \brief (SSC_RFMR) FSLEN Field Extension */ +#define SSC_RFMR_FSLEN_EXT(value) ((SSC_RFMR_FSLEN_EXT_Msk & ((value) << SSC_RFMR_FSLEN_EXT_Pos))) +/* -------- SSC_TCMR : (SSC Offset: 0x18) Transmit Clock Mode Register -------- */ +#define SSC_TCMR_CKS_Pos 0 +#define SSC_TCMR_CKS_Msk (0x3u << SSC_TCMR_CKS_Pos) /**< \brief (SSC_TCMR) Transmit Clock Selection */ +#define SSC_TCMR_CKS_MCK (0x0u << 0) /**< \brief (SSC_TCMR) Divided Clock */ +#define SSC_TCMR_CKS_TK (0x1u << 0) /**< \brief (SSC_TCMR) TK Clock signal */ +#define SSC_TCMR_CKS_RK (0x2u << 0) /**< \brief (SSC_TCMR) RK pin */ +#define SSC_TCMR_CKO_Pos 2 +#define SSC_TCMR_CKO_Msk (0x7u << SSC_TCMR_CKO_Pos) /**< \brief (SSC_TCMR) Transmit Clock Output Mode Selection */ +#define SSC_TCMR_CKO_NONE (0x0u << 2) /**< \brief (SSC_TCMR) None */ +#define SSC_TCMR_CKO_CONTINUOUS (0x1u << 2) /**< \brief (SSC_TCMR) Continuous Receive Clock */ +#define SSC_TCMR_CKO_TRANSFER (0x2u << 2) /**< \brief (SSC_TCMR) Transmit Clock only during data transfers */ +#define SSC_TCMR_CKI (0x1u << 5) /**< \brief (SSC_TCMR) Transmit Clock Inversion */ +#define SSC_TCMR_CKG_Pos 6 +#define SSC_TCMR_CKG_Msk (0x3u << SSC_TCMR_CKG_Pos) /**< \brief (SSC_TCMR) Transmit Clock Gating Selection */ +#define SSC_TCMR_CKG_NONE (0x0u << 6) /**< \brief (SSC_TCMR) None */ +#define SSC_TCMR_CKG_CONTINUOUS (0x1u << 6) /**< \brief (SSC_TCMR) Transmit Clock enabled only if TF Low */ +#define SSC_TCMR_CKG_TRANSFER (0x2u << 6) /**< \brief (SSC_TCMR) Transmit Clock enabled only if TF High */ +#define SSC_TCMR_START_Pos 8 +#define SSC_TCMR_START_Msk (0xfu << SSC_TCMR_START_Pos) /**< \brief (SSC_TCMR) Transmit Start Selection */ +#define SSC_TCMR_START_CONTINUOUS (0x0u << 8) /**< \brief (SSC_TCMR) Continuous, as soon as a word is written in the SSC_THR Register (if Transmit is enabled), and immediately after the end of transfer of the previous data. */ +#define SSC_TCMR_START_RECEIVE (0x1u << 8) /**< \brief (SSC_TCMR) Receive start */ +#define SSC_TCMR_START_RF_LOW (0x2u << 8) /**< \brief (SSC_TCMR) Detection of a low level on TF signal */ +#define SSC_TCMR_START_RF_HIGH (0x3u << 8) /**< \brief (SSC_TCMR) Detection of a high level on TF signal */ +#define SSC_TCMR_START_RF_FALLING (0x4u << 8) /**< \brief (SSC_TCMR) Detection of a falling edge on TF signal */ +#define SSC_TCMR_START_RF_RISING (0x5u << 8) /**< \brief (SSC_TCMR) Detection of a rising edge on TF signal */ +#define SSC_TCMR_START_RF_LEVEL (0x6u << 8) /**< \brief (SSC_TCMR) Detection of any level change on TF signal */ +#define SSC_TCMR_START_RF_EDGE (0x7u << 8) /**< \brief (SSC_TCMR) Detection of any edge on TF signal */ +#define SSC_TCMR_START_CMP_0 (0x8u << 8) /**< \brief (SSC_TCMR) Compare 0 */ +#define SSC_TCMR_STTDLY_Pos 16 +#define SSC_TCMR_STTDLY_Msk (0xffu << SSC_TCMR_STTDLY_Pos) /**< \brief (SSC_TCMR) Transmit Start Delay */ +#define SSC_TCMR_STTDLY(value) ((SSC_TCMR_STTDLY_Msk & ((value) << SSC_TCMR_STTDLY_Pos))) +#define SSC_TCMR_PERIOD_Pos 24 +#define SSC_TCMR_PERIOD_Msk (0xffu << SSC_TCMR_PERIOD_Pos) /**< \brief (SSC_TCMR) Transmit Period Divider Selection */ +#define SSC_TCMR_PERIOD(value) ((SSC_TCMR_PERIOD_Msk & ((value) << SSC_TCMR_PERIOD_Pos))) +/* -------- SSC_TFMR : (SSC Offset: 0x1C) Transmit Frame Mode Register -------- */ +#define SSC_TFMR_DATLEN_Pos 0 +#define SSC_TFMR_DATLEN_Msk (0x1fu << SSC_TFMR_DATLEN_Pos) /**< \brief (SSC_TFMR) Data Length */ +#define SSC_TFMR_DATLEN(value) ((SSC_TFMR_DATLEN_Msk & ((value) << SSC_TFMR_DATLEN_Pos))) +#define SSC_TFMR_DATDEF (0x1u << 5) /**< \brief (SSC_TFMR) Data Default Value */ +#define SSC_TFMR_MSBF (0x1u << 7) /**< \brief (SSC_TFMR) Most Significant Bit First */ +#define SSC_TFMR_DATNB_Pos 8 +#define SSC_TFMR_DATNB_Msk (0xfu << SSC_TFMR_DATNB_Pos) /**< \brief (SSC_TFMR) Data Number per frame */ +#define SSC_TFMR_DATNB(value) ((SSC_TFMR_DATNB_Msk & ((value) << SSC_TFMR_DATNB_Pos))) +#define SSC_TFMR_FSLEN_Pos 16 +#define SSC_TFMR_FSLEN_Msk (0xfu << SSC_TFMR_FSLEN_Pos) /**< \brief (SSC_TFMR) Transmit Frame Sync Length */ +#define SSC_TFMR_FSLEN(value) ((SSC_TFMR_FSLEN_Msk & ((value) << SSC_TFMR_FSLEN_Pos))) +#define SSC_TFMR_FSOS_Pos 20 +#define SSC_TFMR_FSOS_Msk (0x7u << SSC_TFMR_FSOS_Pos) /**< \brief (SSC_TFMR) Transmit Frame Sync Output Selection */ +#define SSC_TFMR_FSOS_NONE (0x0u << 20) /**< \brief (SSC_TFMR) None */ +#define SSC_TFMR_FSOS_NEGATIVE (0x1u << 20) /**< \brief (SSC_TFMR) Negative Pulse */ +#define SSC_TFMR_FSOS_POSITIVE (0x2u << 20) /**< \brief (SSC_TFMR) Positive Pulse */ +#define SSC_TFMR_FSOS_LOW (0x3u << 20) /**< \brief (SSC_TFMR) Driven Low during data transfer */ +#define SSC_TFMR_FSOS_HIGH (0x4u << 20) /**< \brief (SSC_TFMR) Driven High during data transfer */ +#define SSC_TFMR_FSOS_TOGGLING (0x5u << 20) /**< \brief (SSC_TFMR) Toggling at each start of data transfer */ +#define SSC_TFMR_FSDEN (0x1u << 23) /**< \brief (SSC_TFMR) Frame Sync Data Enable */ +#define SSC_TFMR_FSEDGE (0x1u << 24) /**< \brief (SSC_TFMR) Frame Sync Edge Detection */ +#define SSC_TFMR_FSEDGE_POSITIVE (0x0u << 24) /**< \brief (SSC_TFMR) Positive Edge Detection */ +#define SSC_TFMR_FSEDGE_NEGATIVE (0x1u << 24) /**< \brief (SSC_TFMR) Negative Edge Detection */ +#define SSC_TFMR_FSLEN_EXT_Pos 28 +#define SSC_TFMR_FSLEN_EXT_Msk (0xfu << SSC_TFMR_FSLEN_EXT_Pos) /**< \brief (SSC_TFMR) FSLEN Field Extension */ +#define SSC_TFMR_FSLEN_EXT(value) ((SSC_TFMR_FSLEN_EXT_Msk & ((value) << SSC_TFMR_FSLEN_EXT_Pos))) +/* -------- SSC_RHR : (SSC Offset: 0x20) Receive Holding Register -------- */ +#define SSC_RHR_RDAT_Pos 0 +#define SSC_RHR_RDAT_Msk (0xffffffffu << SSC_RHR_RDAT_Pos) /**< \brief (SSC_RHR) Receive Data */ +/* -------- SSC_THR : (SSC Offset: 0x24) Transmit Holding Register -------- */ +#define SSC_THR_TDAT_Pos 0 +#define SSC_THR_TDAT_Msk (0xffffffffu << SSC_THR_TDAT_Pos) /**< \brief (SSC_THR) Transmit Data */ +#define SSC_THR_TDAT(value) ((SSC_THR_TDAT_Msk & ((value) << SSC_THR_TDAT_Pos))) +/* -------- SSC_RSHR : (SSC Offset: 0x30) Receive Sync. Holding Register -------- */ +#define SSC_RSHR_RSDAT_Pos 0 +#define SSC_RSHR_RSDAT_Msk (0xffffu << SSC_RSHR_RSDAT_Pos) /**< \brief (SSC_RSHR) Receive Synchronization Data */ +/* -------- SSC_TSHR : (SSC Offset: 0x34) Transmit Sync. Holding Register -------- */ +#define SSC_TSHR_TSDAT_Pos 0 +#define SSC_TSHR_TSDAT_Msk (0xffffu << SSC_TSHR_TSDAT_Pos) /**< \brief (SSC_TSHR) Transmit Synchronization Data */ +#define SSC_TSHR_TSDAT(value) ((SSC_TSHR_TSDAT_Msk & ((value) << SSC_TSHR_TSDAT_Pos))) +/* -------- SSC_RC0R : (SSC Offset: 0x38) Receive Compare 0 Register -------- */ +#define SSC_RC0R_CP0_Pos 0 +#define SSC_RC0R_CP0_Msk (0xffffu << SSC_RC0R_CP0_Pos) /**< \brief (SSC_RC0R) Receive Compare Data 0 */ +#define SSC_RC0R_CP0(value) ((SSC_RC0R_CP0_Msk & ((value) << SSC_RC0R_CP0_Pos))) +/* -------- SSC_RC1R : (SSC Offset: 0x3C) Receive Compare 1 Register -------- */ +#define SSC_RC1R_CP1_Pos 0 +#define SSC_RC1R_CP1_Msk (0xffffu << SSC_RC1R_CP1_Pos) /**< \brief (SSC_RC1R) Receive Compare Data 1 */ +#define SSC_RC1R_CP1(value) ((SSC_RC1R_CP1_Msk & ((value) << SSC_RC1R_CP1_Pos))) +/* -------- SSC_SR : (SSC Offset: 0x40) Status Register -------- */ +#define SSC_SR_TXRDY (0x1u << 0) /**< \brief (SSC_SR) Transmit Ready */ +#define SSC_SR_TXEMPTY (0x1u << 1) /**< \brief (SSC_SR) Transmit Empty */ +#define SSC_SR_ENDTX (0x1u << 2) /**< \brief (SSC_SR) End of Transmission */ +#define SSC_SR_TXBUFE (0x1u << 3) /**< \brief (SSC_SR) Transmit Buffer Empty */ +#define SSC_SR_RXRDY (0x1u << 4) /**< \brief (SSC_SR) Receive Ready */ +#define SSC_SR_OVRUN (0x1u << 5) /**< \brief (SSC_SR) Receive Overrun */ +#define SSC_SR_ENDRX (0x1u << 6) /**< \brief (SSC_SR) End of Reception */ +#define SSC_SR_RXBUFF (0x1u << 7) /**< \brief (SSC_SR) Receive Buffer Full */ +#define SSC_SR_CP0 (0x1u << 8) /**< \brief (SSC_SR) Compare 0 */ +#define SSC_SR_CP1 (0x1u << 9) /**< \brief (SSC_SR) Compare 1 */ +#define SSC_SR_TXSYN (0x1u << 10) /**< \brief (SSC_SR) Transmit Sync */ +#define SSC_SR_RXSYN (0x1u << 11) /**< \brief (SSC_SR) Receive Sync */ +#define SSC_SR_TXEN (0x1u << 16) /**< \brief (SSC_SR) Transmit Enable */ +#define SSC_SR_RXEN (0x1u << 17) /**< \brief (SSC_SR) Receive Enable */ +/* -------- SSC_IER : (SSC Offset: 0x44) Interrupt Enable Register -------- */ +#define SSC_IER_TXRDY (0x1u << 0) /**< \brief (SSC_IER) Transmit Ready Interrupt Enable */ +#define SSC_IER_TXEMPTY (0x1u << 1) /**< \brief (SSC_IER) Transmit Empty Interrupt Enable */ +#define SSC_IER_ENDTX (0x1u << 2) /**< \brief (SSC_IER) End of Transmission Interrupt Enable */ +#define SSC_IER_TXBUFE (0x1u << 3) /**< \brief (SSC_IER) Transmit Buffer Empty Interrupt Enable */ +#define SSC_IER_RXRDY (0x1u << 4) /**< \brief (SSC_IER) Receive Ready Interrupt Enable */ +#define SSC_IER_OVRUN (0x1u << 5) /**< \brief (SSC_IER) Receive Overrun Interrupt Enable */ +#define SSC_IER_ENDRX (0x1u << 6) /**< \brief (SSC_IER) End of Reception Interrupt Enable */ +#define SSC_IER_RXBUFF (0x1u << 7) /**< \brief (SSC_IER) Receive Buffer Full Interrupt Enable */ +#define SSC_IER_CP0 (0x1u << 8) /**< \brief (SSC_IER) Compare 0 Interrupt Enable */ +#define SSC_IER_CP1 (0x1u << 9) /**< \brief (SSC_IER) Compare 1 Interrupt Enable */ +#define SSC_IER_TXSYN (0x1u << 10) /**< \brief (SSC_IER) Tx Sync Interrupt Enable */ +#define SSC_IER_RXSYN (0x1u << 11) /**< \brief (SSC_IER) Rx Sync Interrupt Enable */ +/* -------- SSC_IDR : (SSC Offset: 0x48) Interrupt Disable Register -------- */ +#define SSC_IDR_TXRDY (0x1u << 0) /**< \brief (SSC_IDR) Transmit Ready Interrupt Disable */ +#define SSC_IDR_TXEMPTY (0x1u << 1) /**< \brief (SSC_IDR) Transmit Empty Interrupt Disable */ +#define SSC_IDR_ENDTX (0x1u << 2) /**< \brief (SSC_IDR) End of Transmission Interrupt Disable */ +#define SSC_IDR_TXBUFE (0x1u << 3) /**< \brief (SSC_IDR) Transmit Buffer Empty Interrupt Disable */ +#define SSC_IDR_RXRDY (0x1u << 4) /**< \brief (SSC_IDR) Receive Ready Interrupt Disable */ +#define SSC_IDR_OVRUN (0x1u << 5) /**< \brief (SSC_IDR) Receive Overrun Interrupt Disable */ +#define SSC_IDR_ENDRX (0x1u << 6) /**< \brief (SSC_IDR) End of Reception Interrupt Disable */ +#define SSC_IDR_RXBUFF (0x1u << 7) /**< \brief (SSC_IDR) Receive Buffer Full Interrupt Disable */ +#define SSC_IDR_CP0 (0x1u << 8) /**< \brief (SSC_IDR) Compare 0 Interrupt Disable */ +#define SSC_IDR_CP1 (0x1u << 9) /**< \brief (SSC_IDR) Compare 1 Interrupt Disable */ +#define SSC_IDR_TXSYN (0x1u << 10) /**< \brief (SSC_IDR) Tx Sync Interrupt Enable */ +#define SSC_IDR_RXSYN (0x1u << 11) /**< \brief (SSC_IDR) Rx Sync Interrupt Enable */ +/* -------- SSC_IMR : (SSC Offset: 0x4C) Interrupt Mask Register -------- */ +#define SSC_IMR_TXRDY (0x1u << 0) /**< \brief (SSC_IMR) Transmit Ready Interrupt Mask */ +#define SSC_IMR_TXEMPTY (0x1u << 1) /**< \brief (SSC_IMR) Transmit Empty Interrupt Mask */ +#define SSC_IMR_ENDTX (0x1u << 2) /**< \brief (SSC_IMR) End of Transmission Interrupt Mask */ +#define SSC_IMR_TXBUFE (0x1u << 3) /**< \brief (SSC_IMR) Transmit Buffer Empty Interrupt Mask */ +#define SSC_IMR_RXRDY (0x1u << 4) /**< \brief (SSC_IMR) Receive Ready Interrupt Mask */ +#define SSC_IMR_OVRUN (0x1u << 5) /**< \brief (SSC_IMR) Receive Overrun Interrupt Mask */ +#define SSC_IMR_ENDRX (0x1u << 6) /**< \brief (SSC_IMR) End of Reception Interrupt Mask */ +#define SSC_IMR_RXBUFF (0x1u << 7) /**< \brief (SSC_IMR) Receive Buffer Full Interrupt Mask */ +#define SSC_IMR_CP0 (0x1u << 8) /**< \brief (SSC_IMR) Compare 0 Interrupt Mask */ +#define SSC_IMR_CP1 (0x1u << 9) /**< \brief (SSC_IMR) Compare 1 Interrupt Mask */ +#define SSC_IMR_TXSYN (0x1u << 10) /**< \brief (SSC_IMR) Tx Sync Interrupt Mask */ +#define SSC_IMR_RXSYN (0x1u << 11) /**< \brief (SSC_IMR) Rx Sync Interrupt Mask */ +/* -------- SSC_WPMR : (SSC Offset: 0xE4) Write Protect Mode Register -------- */ +#define SSC_WPMR_WPEN (0x1u << 0) /**< \brief (SSC_WPMR) Write Protect Enable */ +#define SSC_WPMR_WPKEY_Pos 8 +#define SSC_WPMR_WPKEY_Msk (0xffffffu << SSC_WPMR_WPKEY_Pos) /**< \brief (SSC_WPMR) Write Protect KEY */ +#define SSC_WPMR_WPKEY(value) ((SSC_WPMR_WPKEY_Msk & ((value) << SSC_WPMR_WPKEY_Pos))) +/* -------- SSC_WPSR : (SSC Offset: 0xE8) Write Protect Status Register -------- */ +#define SSC_WPSR_WPVS (0x1u << 0) /**< \brief (SSC_WPSR) Write Protect Violation Status */ +#define SSC_WPSR_WPVSRC_Pos 8 +#define SSC_WPSR_WPVSRC_Msk (0xffffu << SSC_WPSR_WPVSRC_Pos) /**< \brief (SSC_WPSR) Write Protect Violation Source */ +/* -------- SSC_RPR : (SSC Offset: 0x100) Receive Pointer Register -------- */ +#define SSC_RPR_RXPTR_Pos 0 +#define SSC_RPR_RXPTR_Msk (0xffffffffu << SSC_RPR_RXPTR_Pos) /**< \brief (SSC_RPR) Receive Pointer Register */ +#define SSC_RPR_RXPTR(value) ((SSC_RPR_RXPTR_Msk & ((value) << SSC_RPR_RXPTR_Pos))) +/* -------- SSC_RCR : (SSC Offset: 0x104) Receive Counter Register -------- */ +#define SSC_RCR_RXCTR_Pos 0 +#define SSC_RCR_RXCTR_Msk (0xffffu << SSC_RCR_RXCTR_Pos) /**< \brief (SSC_RCR) Receive Counter Register */ +#define SSC_RCR_RXCTR(value) ((SSC_RCR_RXCTR_Msk & ((value) << SSC_RCR_RXCTR_Pos))) +/* -------- SSC_TPR : (SSC Offset: 0x108) Transmit Pointer Register -------- */ +#define SSC_TPR_TXPTR_Pos 0 +#define SSC_TPR_TXPTR_Msk (0xffffffffu << SSC_TPR_TXPTR_Pos) /**< \brief (SSC_TPR) Transmit Counter Register */ +#define SSC_TPR_TXPTR(value) ((SSC_TPR_TXPTR_Msk & ((value) << SSC_TPR_TXPTR_Pos))) +/* -------- SSC_TCR : (SSC Offset: 0x10C) Transmit Counter Register -------- */ +#define SSC_TCR_TXCTR_Pos 0 +#define SSC_TCR_TXCTR_Msk (0xffffu << SSC_TCR_TXCTR_Pos) /**< \brief (SSC_TCR) Transmit Counter Register */ +#define SSC_TCR_TXCTR(value) ((SSC_TCR_TXCTR_Msk & ((value) << SSC_TCR_TXCTR_Pos))) +/* -------- SSC_RNPR : (SSC Offset: 0x110) Receive Next Pointer Register -------- */ +#define SSC_RNPR_RXNPTR_Pos 0 +#define SSC_RNPR_RXNPTR_Msk (0xffffffffu << SSC_RNPR_RXNPTR_Pos) /**< \brief (SSC_RNPR) Receive Next Pointer */ +#define SSC_RNPR_RXNPTR(value) ((SSC_RNPR_RXNPTR_Msk & ((value) << SSC_RNPR_RXNPTR_Pos))) +/* -------- SSC_RNCR : (SSC Offset: 0x114) Receive Next Counter Register -------- */ +#define SSC_RNCR_RXNCTR_Pos 0 +#define SSC_RNCR_RXNCTR_Msk (0xffffu << SSC_RNCR_RXNCTR_Pos) /**< \brief (SSC_RNCR) Receive Next Counter */ +#define SSC_RNCR_RXNCTR(value) ((SSC_RNCR_RXNCTR_Msk & ((value) << SSC_RNCR_RXNCTR_Pos))) +/* -------- SSC_TNPR : (SSC Offset: 0x118) Transmit Next Pointer Register -------- */ +#define SSC_TNPR_TXNPTR_Pos 0 +#define SSC_TNPR_TXNPTR_Msk (0xffffffffu << SSC_TNPR_TXNPTR_Pos) /**< \brief (SSC_TNPR) Transmit Next Pointer */ +#define SSC_TNPR_TXNPTR(value) ((SSC_TNPR_TXNPTR_Msk & ((value) << SSC_TNPR_TXNPTR_Pos))) +/* -------- SSC_TNCR : (SSC Offset: 0x11C) Transmit Next Counter Register -------- */ +#define SSC_TNCR_TXNCTR_Pos 0 +#define SSC_TNCR_TXNCTR_Msk (0xffffu << SSC_TNCR_TXNCTR_Pos) /**< \brief (SSC_TNCR) Transmit Counter Next */ +#define SSC_TNCR_TXNCTR(value) ((SSC_TNCR_TXNCTR_Msk & ((value) << SSC_TNCR_TXNCTR_Pos))) +/* -------- SSC_PTCR : (SSC Offset: 0x120) Transfer Control Register -------- */ +#define SSC_PTCR_RXTEN (0x1u << 0) /**< \brief (SSC_PTCR) Receiver Transfer Enable */ +#define SSC_PTCR_RXTDIS (0x1u << 1) /**< \brief (SSC_PTCR) Receiver Transfer Disable */ +#define SSC_PTCR_TXTEN (0x1u << 8) /**< \brief (SSC_PTCR) Transmitter Transfer Enable */ +#define SSC_PTCR_TXTDIS (0x1u << 9) /**< \brief (SSC_PTCR) Transmitter Transfer Disable */ +/* -------- SSC_PTSR : (SSC Offset: 0x124) Transfer Status Register -------- */ +#define SSC_PTSR_RXTEN (0x1u << 0) /**< \brief (SSC_PTSR) Receiver Transfer Enable */ +#define SSC_PTSR_TXTEN (0x1u << 8) /**< \brief (SSC_PTSR) Transmitter Transfer Enable */ + +/*@}*/ + + +#endif /* _SAM4S_SSC_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_supc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_supc.h new file mode 100644 index 0000000..5a5b4dd --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_supc.h
@@ -0,0 +1,332 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_SUPC_COMPONENT_ +#define _SAM4S_SUPC_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Supply Controller */ +/* ============================================================================= */ +/** \addtogroup SAM4S_SUPC Supply Controller */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Supc hardware registers */ +typedef struct { + WoReg SUPC_CR; /**< \brief (Supc Offset: 0x00) Supply Controller Control Register */ + RwReg SUPC_SMMR; /**< \brief (Supc Offset: 0x04) Supply Controller Supply Monitor Mode Register */ + RwReg SUPC_MR; /**< \brief (Supc Offset: 0x08) Supply Controller Mode Register */ + RwReg SUPC_WUMR; /**< \brief (Supc Offset: 0x0C) Supply Controller Wake Up Mode Register */ + RwReg SUPC_WUIR; /**< \brief (Supc Offset: 0x10) Supply Controller Wake Up Inputs Register */ + RoReg SUPC_SR; /**< \brief (Supc Offset: 0x14) Supply Controller Status Register */ +} Supc; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- SUPC_CR : (SUPC Offset: 0x00) Supply Controller Control Register -------- */ +#define SUPC_CR_VROFF (0x1u << 2) /**< \brief (SUPC_CR) Voltage Regulator Off */ +#define SUPC_CR_VROFF_NO_EFFECT (0x0u << 2) /**< \brief (SUPC_CR) no effect. */ +#define SUPC_CR_VROFF_STOP_VREG (0x1u << 2) /**< \brief (SUPC_CR) if KEY is correct, asserts vddcore_nreset and stops the voltage regulator. */ +#define SUPC_CR_XTALSEL (0x1u << 3) /**< \brief (SUPC_CR) Crystal Oscillator Select */ +#define SUPC_CR_XTALSEL_NO_EFFECT (0x0u << 3) /**< \brief (SUPC_CR) no effect. */ +#define SUPC_CR_XTALSEL_CRYSTAL_SEL (0x1u << 3) /**< \brief (SUPC_CR) if KEY is correct, switches the slow clock on the crystal oscillator output. */ +#define SUPC_CR_KEY_Pos 24 +#define SUPC_CR_KEY_Msk (0xffu << SUPC_CR_KEY_Pos) /**< \brief (SUPC_CR) Password */ +#define SUPC_CR_KEY(value) ((SUPC_CR_KEY_Msk & ((value) << SUPC_CR_KEY_Pos))) +/* -------- SUPC_SMMR : (SUPC Offset: 0x04) Supply Controller Supply Monitor Mode Register -------- */ +#define SUPC_SMMR_SMTH_Pos 0 +#define SUPC_SMMR_SMTH_Msk (0xfu << SUPC_SMMR_SMTH_Pos) /**< \brief (SUPC_SMMR) Supply Monitor Threshold */ +#define SUPC_SMMR_SMTH_1_9V (0x0u << 0) /**< \brief (SUPC_SMMR) 1.9 V */ +#define SUPC_SMMR_SMTH_2_0V (0x1u << 0) /**< \brief (SUPC_SMMR) 2.0 V */ +#define SUPC_SMMR_SMTH_2_1V (0x2u << 0) /**< \brief (SUPC_SMMR) 2.1 V */ +#define SUPC_SMMR_SMTH_2_2V (0x3u << 0) /**< \brief (SUPC_SMMR) 2.2 V */ +#define SUPC_SMMR_SMTH_2_3V (0x4u << 0) /**< \brief (SUPC_SMMR) 2.3 V */ +#define SUPC_SMMR_SMTH_2_4V (0x5u << 0) /**< \brief (SUPC_SMMR) 2.4 V */ +#define SUPC_SMMR_SMTH_2_5V (0x6u << 0) /**< \brief (SUPC_SMMR) 2.5 V */ +#define SUPC_SMMR_SMTH_2_6V (0x7u << 0) /**< \brief (SUPC_SMMR) 2.6 V */ +#define SUPC_SMMR_SMTH_2_7V (0x8u << 0) /**< \brief (SUPC_SMMR) 2.7 V */ +#define SUPC_SMMR_SMTH_2_8V (0x9u << 0) /**< \brief (SUPC_SMMR) 2.8 V */ +#define SUPC_SMMR_SMTH_2_9V (0xAu << 0) /**< \brief (SUPC_SMMR) 2.9 V */ +#define SUPC_SMMR_SMTH_3_0V (0xBu << 0) /**< \brief (SUPC_SMMR) 3.0 V */ +#define SUPC_SMMR_SMTH_3_1V (0xCu << 0) /**< \brief (SUPC_SMMR) 3.1 V */ +#define SUPC_SMMR_SMTH_3_2V (0xDu << 0) /**< \brief (SUPC_SMMR) 3.2 V */ +#define SUPC_SMMR_SMTH_3_3V (0xEu << 0) /**< \brief (SUPC_SMMR) 3.3 V */ +#define SUPC_SMMR_SMTH_3_4V (0xFu << 0) /**< \brief (SUPC_SMMR) 3.4 V */ +#define SUPC_SMMR_SMSMPL_Pos 8 +#define SUPC_SMMR_SMSMPL_Msk (0x7u << SUPC_SMMR_SMSMPL_Pos) /**< \brief (SUPC_SMMR) Supply Monitor Sampling Period */ +#define SUPC_SMMR_SMSMPL_SMD (0x0u << 8) /**< \brief (SUPC_SMMR) Supply Monitor disabled */ +#define SUPC_SMMR_SMSMPL_CSM (0x1u << 8) /**< \brief (SUPC_SMMR) Continuous Supply Monitor */ +#define SUPC_SMMR_SMSMPL_32SLCK (0x2u << 8) /**< \brief (SUPC_SMMR) Supply Monitor enabled one SLCK period every 32 SLCK periods */ +#define SUPC_SMMR_SMSMPL_256SLCK (0x3u << 8) /**< \brief (SUPC_SMMR) Supply Monitor enabled one SLCK period every 256 SLCK periods */ +#define SUPC_SMMR_SMSMPL_2048SLCK (0x4u << 8) /**< \brief (SUPC_SMMR) Supply Monitor enabled one SLCK period every 2,048 SLCK periods */ +#define SUPC_SMMR_SMRSTEN (0x1u << 12) /**< \brief (SUPC_SMMR) Supply Monitor Reset Enable */ +#define SUPC_SMMR_SMRSTEN_NOT_ENABLE (0x0u << 12) /**< \brief (SUPC_SMMR) the core reset signal "vddcore_nreset" is not affected when a supply monitor detection occurs. */ +#define SUPC_SMMR_SMRSTEN_ENABLE (0x1u << 12) /**< \brief (SUPC_SMMR) the core reset signal, vddcore_nreset is asserted when a supply monitor detection occurs. */ +#define SUPC_SMMR_SMIEN (0x1u << 13) /**< \brief (SUPC_SMMR) Supply Monitor Interrupt Enable */ +#define SUPC_SMMR_SMIEN_NOT_ENABLE (0x0u << 13) /**< \brief (SUPC_SMMR) the SUPC interrupt signal is not affected when a supply monitor detection occurs. */ +#define SUPC_SMMR_SMIEN_ENABLE (0x1u << 13) /**< \brief (SUPC_SMMR) the SUPC interrupt signal is asserted when a supply monitor detection occurs. */ +/* -------- SUPC_MR : (SUPC Offset: 0x08) Supply Controller Mode Register -------- */ +#define SUPC_MR_BODRSTEN (0x1u << 12) /**< \brief (SUPC_MR) Brownout Detector Reset Enable */ +#define SUPC_MR_BODRSTEN_NOT_ENABLE (0x0u << 12) /**< \brief (SUPC_MR) the core reset signal "vddcore_nreset" is not affected when a brownout detection occurs. */ +#define SUPC_MR_BODRSTEN_ENABLE (0x1u << 12) /**< \brief (SUPC_MR) the core reset signal, vddcore_nreset is asserted when a brownout detection occurs. */ +#define SUPC_MR_BODDIS (0x1u << 13) /**< \brief (SUPC_MR) Brownout Detector Disable */ +#define SUPC_MR_BODDIS_ENABLE (0x0u << 13) /**< \brief (SUPC_MR) the core brownout detector is enabled. */ +#define SUPC_MR_BODDIS_DISABLE (0x1u << 13) /**< \brief (SUPC_MR) the core brownout detector is disabled. */ +#define SUPC_MR_ONREG (0x1u << 14) /**< \brief (SUPC_MR) Voltage Regulator enable */ +#define SUPC_MR_ONREG_ONREG_UNUSED (0x0u << 14) /**< \brief (SUPC_MR) Voltage Regulator is not used */ +#define SUPC_MR_ONREG_ONREG_USED (0x1u << 14) /**< \brief (SUPC_MR) Voltage Regulator is used */ +#define SUPC_MR_OSCBYPASS (0x1u << 20) /**< \brief (SUPC_MR) Oscillator Bypass */ +#define SUPC_MR_OSCBYPASS_NO_EFFECT (0x0u << 20) /**< \brief (SUPC_MR) no effect. Clock selection depends on XTALSEL value. */ +#define SUPC_MR_OSCBYPASS_BYPASS (0x1u << 20) /**< \brief (SUPC_MR) the 32-KHz XTAL oscillator is selected and is put in bypass mode. */ +#define SUPC_MR_KEY_Pos 24 +#define SUPC_MR_KEY_Msk (0xffu << SUPC_MR_KEY_Pos) /**< \brief (SUPC_MR) Password Key */ +#define SUPC_MR_KEY(value) ((SUPC_MR_KEY_Msk & ((value) << SUPC_MR_KEY_Pos))) +/* -------- SUPC_WUMR : (SUPC Offset: 0x0C) Supply Controller Wake Up Mode Register -------- */ +#define SUPC_WUMR_SMEN (0x1u << 1) /**< \brief (SUPC_WUMR) Supply Monitor Wake Up Enable */ +#define SUPC_WUMR_SMEN_NOT_ENABLE (0x0u << 1) /**< \brief (SUPC_WUMR) the supply monitor detection has no wake up effect. */ +#define SUPC_WUMR_SMEN_ENABLE (0x1u << 1) /**< \brief (SUPC_WUMR) the supply monitor detection forces the wake up of the core power supply. */ +#define SUPC_WUMR_RTTEN (0x1u << 2) /**< \brief (SUPC_WUMR) Real Time Timer Wake Up Enable */ +#define SUPC_WUMR_RTTEN_NOT_ENABLE (0x0u << 2) /**< \brief (SUPC_WUMR) the RTT alarm signal has no wake up effect. */ +#define SUPC_WUMR_RTTEN_ENABLE (0x1u << 2) /**< \brief (SUPC_WUMR) the RTT alarm signal forces the wake up of the core power supply. */ +#define SUPC_WUMR_RTCEN (0x1u << 3) /**< \brief (SUPC_WUMR) Real Time Clock Wake Up Enable */ +#define SUPC_WUMR_RTCEN_NOT_ENABLE (0x0u << 3) /**< \brief (SUPC_WUMR) the RTC alarm signal has no wake up effect. */ +#define SUPC_WUMR_RTCEN_ENABLE (0x1u << 3) /**< \brief (SUPC_WUMR) the RTC alarm signal forces the wake up of the core power supply. */ +#define SUPC_WUMR_LPDBCEN0 (0x1u << 5) /**< \brief (SUPC_WUMR) Low power Debouncer ENable WKUP0 */ +#define SUPC_WUMR_LPDBCEN0_NOT_ENABLE (0x0u << 5) /**< \brief (SUPC_WUMR) the WKUP0 input pin is not connected with low power debouncer. */ +#define SUPC_WUMR_LPDBCEN0_ENABLE (0x1u << 5) /**< \brief (SUPC_WUMR) the WKUP0 input pin is connected with low power debouncer and can force the a core wake up. */ +#define SUPC_WUMR_LPDBCEN1 (0x1u << 6) /**< \brief (SUPC_WUMR) Low power Debouncer ENable WKUP1 */ +#define SUPC_WUMR_LPDBCEN1_NOT_ENABLE (0x0u << 6) /**< \brief (SUPC_WUMR) the WKUP1input pin is not connected with low power debouncer. */ +#define SUPC_WUMR_LPDBCEN1_ENABLE (0x1u << 6) /**< \brief (SUPC_WUMR) the WKUP1 input pin is connected with low power debouncer and can force the a core wake up. */ +#define SUPC_WUMR_LPDBCCLR (0x1u << 7) /**< \brief (SUPC_WUMR) Low power Debouncer Clear */ +#define SUPC_WUMR_LPDBCCLR_NOT_ENABLE (0x0u << 7) /**< \brief (SUPC_WUMR) a low power debounce event does not create an immediate clear on half GPBR registers. */ +#define SUPC_WUMR_LPDBCCLR_ENABLE (0x1u << 7) /**< \brief (SUPC_WUMR) a low power debounce event on WKUP0 or WKUP1 generates an immediate clear on half GPBR registers. */ +#define SUPC_WUMR_WKUPDBC_Pos 12 +#define SUPC_WUMR_WKUPDBC_Msk (0x7u << SUPC_WUMR_WKUPDBC_Pos) /**< \brief (SUPC_WUMR) Wake Up Inputs Debouncer Period */ +#define SUPC_WUMR_WKUPDBC_IMMEDIATE (0x0u << 12) /**< \brief (SUPC_WUMR) Immediate, no debouncing, detected active at least on one Slow Clock edge. */ +#define SUPC_WUMR_WKUPDBC_3_SCLK (0x1u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 3 SLCK periods */ +#define SUPC_WUMR_WKUPDBC_32_SCLK (0x2u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 32 SLCK periods */ +#define SUPC_WUMR_WKUPDBC_512_SCLK (0x3u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 512 SLCK periods */ +#define SUPC_WUMR_WKUPDBC_4096_SCLK (0x4u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 4,096 SLCK periods */ +#define SUPC_WUMR_WKUPDBC_32768_SCLK (0x5u << 12) /**< \brief (SUPC_WUMR) WKUPx shall be in its active state for at least 32,768 SLCK periods */ +#define SUPC_WUMR_LPDBC_Pos 16 +#define SUPC_WUMR_LPDBC_Msk (0x7u << SUPC_WUMR_LPDBC_Pos) /**< \brief (SUPC_WUMR) Low Power DeBounCer Period */ +#define SUPC_WUMR_LPDBC_DISABLE (0x0u << 16) /**< \brief (SUPC_WUMR) Disable the low power debouncer. */ +#define SUPC_WUMR_LPDBC_2_RTCOUT0 (0x1u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 2 RTCOUT0 periods */ +#define SUPC_WUMR_LPDBC_3_RTCOUT0 (0x2u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 3 RTCOUT0 periods */ +#define SUPC_WUMR_LPDBC_4_RTCOUT0 (0x3u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 4 RTCOUT0 periods */ +#define SUPC_WUMR_LPDBC_5_RTCOUT0 (0x4u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 5 RTCOUT0 periods */ +#define SUPC_WUMR_LPDBC_6_RTCOUT0 (0x5u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 6 RTCOUT0 periods */ +#define SUPC_WUMR_LPDBC_7_RTCOUT0 (0x6u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 7 RTCOUT0 periods */ +#define SUPC_WUMR_LPDBC_8_RTCOUT0 (0x7u << 16) /**< \brief (SUPC_WUMR) WKUP0/1 in its active state for at least 8 RTCOUT0 periods */ +/* -------- SUPC_WUIR : (SUPC Offset: 0x10) Supply Controller Wake Up Inputs Register -------- */ +#define SUPC_WUIR_WKUPEN0 (0x1u << 0) /**< \brief (SUPC_WUIR) Wake Up Input Enable 0 */ +#define SUPC_WUIR_WKUPEN0_NOT_ENABLE (0x0u << 0) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */ +#define SUPC_WUIR_WKUPEN0_ENABLE (0x1u << 0) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPEN1 (0x1u << 1) /**< \brief (SUPC_WUIR) Wake Up Input Enable 1 */ +#define SUPC_WUIR_WKUPEN1_NOT_ENABLE (0x0u << 1) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */ +#define SUPC_WUIR_WKUPEN1_ENABLE (0x1u << 1) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPEN2 (0x1u << 2) /**< \brief (SUPC_WUIR) Wake Up Input Enable 2 */ +#define SUPC_WUIR_WKUPEN2_NOT_ENABLE (0x0u << 2) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */ +#define SUPC_WUIR_WKUPEN2_ENABLE (0x1u << 2) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPEN3 (0x1u << 3) /**< \brief (SUPC_WUIR) Wake Up Input Enable 3 */ +#define SUPC_WUIR_WKUPEN3_NOT_ENABLE (0x0u << 3) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */ +#define SUPC_WUIR_WKUPEN3_ENABLE (0x1u << 3) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPEN4 (0x1u << 4) /**< \brief (SUPC_WUIR) Wake Up Input Enable 4 */ +#define SUPC_WUIR_WKUPEN4_NOT_ENABLE (0x0u << 4) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */ +#define SUPC_WUIR_WKUPEN4_ENABLE (0x1u << 4) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPEN5 (0x1u << 5) /**< \brief (SUPC_WUIR) Wake Up Input Enable 5 */ +#define SUPC_WUIR_WKUPEN5_NOT_ENABLE (0x0u << 5) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */ +#define SUPC_WUIR_WKUPEN5_ENABLE (0x1u << 5) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPEN6 (0x1u << 6) /**< \brief (SUPC_WUIR) Wake Up Input Enable 6 */ +#define SUPC_WUIR_WKUPEN6_NOT_ENABLE (0x0u << 6) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */ +#define SUPC_WUIR_WKUPEN6_ENABLE (0x1u << 6) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPEN7 (0x1u << 7) /**< \brief (SUPC_WUIR) Wake Up Input Enable 7 */ +#define SUPC_WUIR_WKUPEN7_NOT_ENABLE (0x0u << 7) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */ +#define SUPC_WUIR_WKUPEN7_ENABLE (0x1u << 7) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPEN8 (0x1u << 8) /**< \brief (SUPC_WUIR) Wake Up Input Enable 8 */ +#define SUPC_WUIR_WKUPEN8_NOT_ENABLE (0x0u << 8) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */ +#define SUPC_WUIR_WKUPEN8_ENABLE (0x1u << 8) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPEN9 (0x1u << 9) /**< \brief (SUPC_WUIR) Wake Up Input Enable 9 */ +#define SUPC_WUIR_WKUPEN9_NOT_ENABLE (0x0u << 9) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */ +#define SUPC_WUIR_WKUPEN9_ENABLE (0x1u << 9) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPEN10 (0x1u << 10) /**< \brief (SUPC_WUIR) Wake Up Input Enable 10 */ +#define SUPC_WUIR_WKUPEN10_NOT_ENABLE (0x0u << 10) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */ +#define SUPC_WUIR_WKUPEN10_ENABLE (0x1u << 10) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPEN11 (0x1u << 11) /**< \brief (SUPC_WUIR) Wake Up Input Enable 11 */ +#define SUPC_WUIR_WKUPEN11_NOT_ENABLE (0x0u << 11) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */ +#define SUPC_WUIR_WKUPEN11_ENABLE (0x1u << 11) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPEN12 (0x1u << 12) /**< \brief (SUPC_WUIR) Wake Up Input Enable 12 */ +#define SUPC_WUIR_WKUPEN12_NOT_ENABLE (0x0u << 12) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */ +#define SUPC_WUIR_WKUPEN12_ENABLE (0x1u << 12) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPEN13 (0x1u << 13) /**< \brief (SUPC_WUIR) Wake Up Input Enable 13 */ +#define SUPC_WUIR_WKUPEN13_NOT_ENABLE (0x0u << 13) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */ +#define SUPC_WUIR_WKUPEN13_ENABLE (0x1u << 13) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPEN14 (0x1u << 14) /**< \brief (SUPC_WUIR) Wake Up Input Enable 14 */ +#define SUPC_WUIR_WKUPEN14_NOT_ENABLE (0x0u << 14) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */ +#define SUPC_WUIR_WKUPEN14_ENABLE (0x1u << 14) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPEN15 (0x1u << 15) /**< \brief (SUPC_WUIR) Wake Up Input Enable 15 */ +#define SUPC_WUIR_WKUPEN15_NOT_ENABLE (0x0u << 15) /**< \brief (SUPC_WUIR) the corresponding wake-up input has no wake up effect. */ +#define SUPC_WUIR_WKUPEN15_ENABLE (0x1u << 15) /**< \brief (SUPC_WUIR) the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT0 (0x1u << 16) /**< \brief (SUPC_WUIR) Wake Up Input Transition 0 */ +#define SUPC_WUIR_WKUPT0_HIGH_TO_LOW (0x0u << 16) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT0_LOW_TO_HIGH (0x1u << 16) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT1 (0x1u << 17) /**< \brief (SUPC_WUIR) Wake Up Input Transition 1 */ +#define SUPC_WUIR_WKUPT1_HIGH_TO_LOW (0x0u << 17) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT1_LOW_TO_HIGH (0x1u << 17) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT2 (0x1u << 18) /**< \brief (SUPC_WUIR) Wake Up Input Transition 2 */ +#define SUPC_WUIR_WKUPT2_HIGH_TO_LOW (0x0u << 18) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT2_LOW_TO_HIGH (0x1u << 18) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT3 (0x1u << 19) /**< \brief (SUPC_WUIR) Wake Up Input Transition 3 */ +#define SUPC_WUIR_WKUPT3_HIGH_TO_LOW (0x0u << 19) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT3_LOW_TO_HIGH (0x1u << 19) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT4 (0x1u << 20) /**< \brief (SUPC_WUIR) Wake Up Input Transition 4 */ +#define SUPC_WUIR_WKUPT4_HIGH_TO_LOW (0x0u << 20) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT4_LOW_TO_HIGH (0x1u << 20) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT5 (0x1u << 21) /**< \brief (SUPC_WUIR) Wake Up Input Transition 5 */ +#define SUPC_WUIR_WKUPT5_HIGH_TO_LOW (0x0u << 21) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT5_LOW_TO_HIGH (0x1u << 21) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT6 (0x1u << 22) /**< \brief (SUPC_WUIR) Wake Up Input Transition 6 */ +#define SUPC_WUIR_WKUPT6_HIGH_TO_LOW (0x0u << 22) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT6_LOW_TO_HIGH (0x1u << 22) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT7 (0x1u << 23) /**< \brief (SUPC_WUIR) Wake Up Input Transition 7 */ +#define SUPC_WUIR_WKUPT7_HIGH_TO_LOW (0x0u << 23) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT7_LOW_TO_HIGH (0x1u << 23) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT8 (0x1u << 24) /**< \brief (SUPC_WUIR) Wake Up Input Transition 8 */ +#define SUPC_WUIR_WKUPT8_HIGH_TO_LOW (0x0u << 24) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT8_LOW_TO_HIGH (0x1u << 24) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT9 (0x1u << 25) /**< \brief (SUPC_WUIR) Wake Up Input Transition 9 */ +#define SUPC_WUIR_WKUPT9_HIGH_TO_LOW (0x0u << 25) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT9_LOW_TO_HIGH (0x1u << 25) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT10 (0x1u << 26) /**< \brief (SUPC_WUIR) Wake Up Input Transition 10 */ +#define SUPC_WUIR_WKUPT10_HIGH_TO_LOW (0x0u << 26) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT10_LOW_TO_HIGH (0x1u << 26) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT11 (0x1u << 27) /**< \brief (SUPC_WUIR) Wake Up Input Transition 11 */ +#define SUPC_WUIR_WKUPT11_HIGH_TO_LOW (0x0u << 27) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT11_LOW_TO_HIGH (0x1u << 27) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT12 (0x1u << 28) /**< \brief (SUPC_WUIR) Wake Up Input Transition 12 */ +#define SUPC_WUIR_WKUPT12_HIGH_TO_LOW (0x0u << 28) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT12_LOW_TO_HIGH (0x1u << 28) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT13 (0x1u << 29) /**< \brief (SUPC_WUIR) Wake Up Input Transition 13 */ +#define SUPC_WUIR_WKUPT13_HIGH_TO_LOW (0x0u << 29) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT13_LOW_TO_HIGH (0x1u << 29) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT14 (0x1u << 30) /**< \brief (SUPC_WUIR) Wake Up Input Transition 14 */ +#define SUPC_WUIR_WKUPT14_HIGH_TO_LOW (0x0u << 30) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT14_LOW_TO_HIGH (0x1u << 30) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT15 (0x1u << 31) /**< \brief (SUPC_WUIR) Wake Up Input Transition 15 */ +#define SUPC_WUIR_WKUPT15_HIGH_TO_LOW (0x0u << 31) /**< \brief (SUPC_WUIR) a high to low level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +#define SUPC_WUIR_WKUPT15_LOW_TO_HIGH (0x1u << 31) /**< \brief (SUPC_WUIR) a low to high level transition on the corresponding wake-up input forces the wake up of the core power supply. */ +/* -------- SUPC_SR : (SUPC Offset: 0x14) Supply Controller Status Register -------- */ +#define SUPC_SR_WKUPS (0x1u << 1) /**< \brief (SUPC_SR) WKUP Wake Up Status */ +#define SUPC_SR_WKUPS_NO (0x0u << 1) /**< \brief (SUPC_SR) no wake up due to the assertion of the WKUP pins has occurred since the last read of SUPC_SR. */ +#define SUPC_SR_WKUPS_PRESENT (0x1u << 1) /**< \brief (SUPC_SR) at least one wake up due to the assertion of the WKUP pins has occurred since the last read of SUPC_SR. */ +#define SUPC_SR_SMWS (0x1u << 2) /**< \brief (SUPC_SR) Supply Monitor Detection Wake Up Status */ +#define SUPC_SR_SMWS_NO (0x0u << 2) /**< \brief (SUPC_SR) no wake up due to a supply monitor detection has occurred since the last read of SUPC_SR. */ +#define SUPC_SR_SMWS_PRESENT (0x1u << 2) /**< \brief (SUPC_SR) at least one wake up due to a supply monitor detection has occurred since the last read of SUPC_SR. */ +#define SUPC_SR_BODRSTS (0x1u << 3) /**< \brief (SUPC_SR) Brownout Detector Reset Status */ +#define SUPC_SR_BODRSTS_NO (0x0u << 3) /**< \brief (SUPC_SR) no core brownout rising edge event has been detected since the last read of the SUPC_SR. */ +#define SUPC_SR_BODRSTS_PRESENT (0x1u << 3) /**< \brief (SUPC_SR) at least one brownout output rising edge event has been detected since the last read of the SUPC_SR. */ +#define SUPC_SR_SMRSTS (0x1u << 4) /**< \brief (SUPC_SR) Supply Monitor Reset Status */ +#define SUPC_SR_SMRSTS_NO (0x0u << 4) /**< \brief (SUPC_SR) no supply monitor detection has generated a core reset since the last read of the SUPC_SR. */ +#define SUPC_SR_SMRSTS_PRESENT (0x1u << 4) /**< \brief (SUPC_SR) at least one supply monitor detection has generated a core reset since the last read of the SUPC_SR. */ +#define SUPC_SR_SMS (0x1u << 5) /**< \brief (SUPC_SR) Supply Monitor Status */ +#define SUPC_SR_SMS_NO (0x0u << 5) /**< \brief (SUPC_SR) no supply monitor detection since the last read of SUPC_SR. */ +#define SUPC_SR_SMS_PRESENT (0x1u << 5) /**< \brief (SUPC_SR) at least one supply monitor detection since the last read of SUPC_SR. */ +#define SUPC_SR_SMOS (0x1u << 6) /**< \brief (SUPC_SR) Supply Monitor Output Status */ +#define SUPC_SR_SMOS_HIGH (0x0u << 6) /**< \brief (SUPC_SR) the supply monitor detected VDDIO higher than its threshold at its last measurement. */ +#define SUPC_SR_SMOS_LOW (0x1u << 6) /**< \brief (SUPC_SR) the supply monitor detected VDDIO lower than its threshold at its last measurement. */ +#define SUPC_SR_OSCSEL (0x1u << 7) /**< \brief (SUPC_SR) 32-kHz Oscillator Selection Status */ +#define SUPC_SR_OSCSEL_RC (0x0u << 7) /**< \brief (SUPC_SR) the slow clock, SLCK is generated by the embedded 32-kHz RC oscillator. */ +#define SUPC_SR_OSCSEL_CRYST (0x1u << 7) /**< \brief (SUPC_SR) the slow clock, SLCK is generated by the 32-kHz crystal oscillator. */ +#define SUPC_SR_LPDBCS0 (0x1u << 13) /**< \brief (SUPC_SR) Low Power Debouncer Wake Up Status on WKUP0 */ +#define SUPC_SR_LPDBCS0_NO (0x0u << 13) /**< \brief (SUPC_SR) no wake up due to the assertion of the WKUP0 pin has occurred since the last read of SUPC_SR. */ +#define SUPC_SR_LPDBCS0_PRESENT (0x1u << 13) /**< \brief (SUPC_SR) at least one wake up due to the assertion of the WKUP0 pin has occurred since the last read of SUPC_SR. */ +#define SUPC_SR_LPDBCS1 (0x1u << 14) /**< \brief (SUPC_SR) Low Power Debouncer Wake Up Status on WKUP1 */ +#define SUPC_SR_LPDBCS1_NO (0x0u << 14) /**< \brief (SUPC_SR) no wake up due to the assertion of the WKUP1 pin has occurred since the last read of SUPC_SR. */ +#define SUPC_SR_LPDBCS1_PRESENT (0x1u << 14) /**< \brief (SUPC_SR) at least one wake up due to the assertion of the WKUP1 pin has occurred since the last read of SUPC_SR. */ +#define SUPC_SR_WKUPIS0 (0x1u << 16) /**< \brief (SUPC_SR) WKUP Input Status 0 */ +#define SUPC_SR_WKUPIS0_DIS (0x0u << 16) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS0_EN (0x1u << 16) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS1 (0x1u << 17) /**< \brief (SUPC_SR) WKUP Input Status 1 */ +#define SUPC_SR_WKUPIS1_DIS (0x0u << 17) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS1_EN (0x1u << 17) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS2 (0x1u << 18) /**< \brief (SUPC_SR) WKUP Input Status 2 */ +#define SUPC_SR_WKUPIS2_DIS (0x0u << 18) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS2_EN (0x1u << 18) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS3 (0x1u << 19) /**< \brief (SUPC_SR) WKUP Input Status 3 */ +#define SUPC_SR_WKUPIS3_DIS (0x0u << 19) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS3_EN (0x1u << 19) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS4 (0x1u << 20) /**< \brief (SUPC_SR) WKUP Input Status 4 */ +#define SUPC_SR_WKUPIS4_DIS (0x0u << 20) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS4_EN (0x1u << 20) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS5 (0x1u << 21) /**< \brief (SUPC_SR) WKUP Input Status 5 */ +#define SUPC_SR_WKUPIS5_DIS (0x0u << 21) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS5_EN (0x1u << 21) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS6 (0x1u << 22) /**< \brief (SUPC_SR) WKUP Input Status 6 */ +#define SUPC_SR_WKUPIS6_DIS (0x0u << 22) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS6_EN (0x1u << 22) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS7 (0x1u << 23) /**< \brief (SUPC_SR) WKUP Input Status 7 */ +#define SUPC_SR_WKUPIS7_DIS (0x0u << 23) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS7_EN (0x1u << 23) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS8 (0x1u << 24) /**< \brief (SUPC_SR) WKUP Input Status 8 */ +#define SUPC_SR_WKUPIS8_DIS (0x0u << 24) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS8_EN (0x1u << 24) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS9 (0x1u << 25) /**< \brief (SUPC_SR) WKUP Input Status 9 */ +#define SUPC_SR_WKUPIS9_DIS (0x0u << 25) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS9_EN (0x1u << 25) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS10 (0x1u << 26) /**< \brief (SUPC_SR) WKUP Input Status 10 */ +#define SUPC_SR_WKUPIS10_DIS (0x0u << 26) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS10_EN (0x1u << 26) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS11 (0x1u << 27) /**< \brief (SUPC_SR) WKUP Input Status 11 */ +#define SUPC_SR_WKUPIS11_DIS (0x0u << 27) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS11_EN (0x1u << 27) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS12 (0x1u << 28) /**< \brief (SUPC_SR) WKUP Input Status 12 */ +#define SUPC_SR_WKUPIS12_DIS (0x0u << 28) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS12_EN (0x1u << 28) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS13 (0x1u << 29) /**< \brief (SUPC_SR) WKUP Input Status 13 */ +#define SUPC_SR_WKUPIS13_DIS (0x0u << 29) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS13_EN (0x1u << 29) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS14 (0x1u << 30) /**< \brief (SUPC_SR) WKUP Input Status 14 */ +#define SUPC_SR_WKUPIS14_DIS (0x0u << 30) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS14_EN (0x1u << 30) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS15 (0x1u << 31) /**< \brief (SUPC_SR) WKUP Input Status 15 */ +#define SUPC_SR_WKUPIS15_DIS (0x0u << 31) /**< \brief (SUPC_SR) the corresponding wake-up input is disabled, or was inactive at the time the debouncer triggered a wake up event. */ +#define SUPC_SR_WKUPIS15_EN (0x1u << 31) /**< \brief (SUPC_SR) the corresponding wake-up input was active at the time the debouncer triggered a wake up event. */ + +/*@}*/ + + +#endif /* _SAM4S_SUPC_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_tc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_tc.h new file mode 100644 index 0000000..7f63f92 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_tc.h
@@ -0,0 +1,313 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_TC_COMPONENT_ +#define _SAM4S_TC_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Timer Counter */ +/* ============================================================================= */ +/** \addtogroup SAM4S_TC Timer Counter */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief TcChannel hardware registers */ +typedef struct { + RwReg TC_CCR; /**< \brief (TcChannel Offset: 0x0) Channel Control Register */ + RwReg TC_CMR; /**< \brief (TcChannel Offset: 0x4) Channel Mode Register */ + RwReg TC_SMMR; /**< \brief (TcChannel Offset: 0x8) Stepper Motor Mode Register */ + RoReg Reserved1[1]; + RwReg TC_CV; /**< \brief (TcChannel Offset: 0x10) Counter Value */ + RwReg TC_RA; /**< \brief (TcChannel Offset: 0x14) Register A */ + RwReg TC_RB; /**< \brief (TcChannel Offset: 0x18) Register B */ + RwReg TC_RC; /**< \brief (TcChannel Offset: 0x1C) Register C */ + RwReg TC_SR; /**< \brief (TcChannel Offset: 0x20) Status Register */ + RwReg TC_IER; /**< \brief (TcChannel Offset: 0x24) Interrupt Enable Register */ + RwReg TC_IDR; /**< \brief (TcChannel Offset: 0x28) Interrupt Disable Register */ + RwReg TC_IMR; /**< \brief (TcChannel Offset: 0x2C) Interrupt Mask Register */ + RoReg Reserved2[4]; +} TcChannel; +/** \brief Tc hardware registers */ +#define TCCHANNEL_NUMBER 3 +typedef struct { + TcChannel TC_CHANNEL[TCCHANNEL_NUMBER]; /**< \brief (Tc Offset: 0x0) channel = 0 .. 2 */ + WoReg TC_BCR; /**< \brief (Tc Offset: 0xC0) Block Control Register */ + RwReg TC_BMR; /**< \brief (Tc Offset: 0xC4) Block Mode Register */ + WoReg TC_QIER; /**< \brief (Tc Offset: 0xC8) QDEC Interrupt Enable Register */ + WoReg TC_QIDR; /**< \brief (Tc Offset: 0xCC) QDEC Interrupt Disable Register */ + RoReg TC_QIMR; /**< \brief (Tc Offset: 0xD0) QDEC Interrupt Mask Register */ + RoReg TC_QISR; /**< \brief (Tc Offset: 0xD4) QDEC Interrupt Status Register */ + RwReg TC_FMR; /**< \brief (Tc Offset: 0xD8) Fault Mode Register */ + RoReg Reserved1[2]; + RwReg TC_WPMR; /**< \brief (Tc Offset: 0xE4) Write Protect Mode Register */ +} Tc; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- TC_CCR : (TC Offset: N/A) Channel Control Register -------- */ +#define TC_CCR_CLKEN (0x1u << 0) /**< \brief (TC_CCR) Counter Clock Enable Command */ +#define TC_CCR_CLKDIS (0x1u << 1) /**< \brief (TC_CCR) Counter Clock Disable Command */ +#define TC_CCR_SWTRG (0x1u << 2) /**< \brief (TC_CCR) Software Trigger Command */ +/* -------- TC_CMR : (TC Offset: N/A) Channel Mode Register -------- */ +#define TC_CMR_TCCLKS_Pos 0 +#define TC_CMR_TCCLKS_Msk (0x7u << TC_CMR_TCCLKS_Pos) /**< \brief (TC_CMR) Clock Selection */ +#define TC_CMR_TCCLKS_TIMER_CLOCK1 (0x0u << 0) /**< \brief (TC_CMR) Clock selected: TCLK1 */ +#define TC_CMR_TCCLKS_TIMER_CLOCK2 (0x1u << 0) /**< \brief (TC_CMR) Clock selected: TCLK2 */ +#define TC_CMR_TCCLKS_TIMER_CLOCK3 (0x2u << 0) /**< \brief (TC_CMR) Clock selected: TCLK3 */ +#define TC_CMR_TCCLKS_TIMER_CLOCK4 (0x3u << 0) /**< \brief (TC_CMR) Clock selected: TCLK4 */ +#define TC_CMR_TCCLKS_TIMER_CLOCK5 (0x4u << 0) /**< \brief (TC_CMR) Clock selected: TCLK5 */ +#define TC_CMR_TCCLKS_XC0 (0x5u << 0) /**< \brief (TC_CMR) Clock selected: XC0 */ +#define TC_CMR_TCCLKS_XC1 (0x6u << 0) /**< \brief (TC_CMR) Clock selected: XC1 */ +#define TC_CMR_TCCLKS_XC2 (0x7u << 0) /**< \brief (TC_CMR) Clock selected: XC2 */ +#define TC_CMR_CLKI (0x1u << 3) /**< \brief (TC_CMR) Clock Invert */ +#define TC_CMR_BURST_Pos 4 +#define TC_CMR_BURST_Msk (0x3u << TC_CMR_BURST_Pos) /**< \brief (TC_CMR) Burst Signal Selection */ +#define TC_CMR_BURST_NONE (0x0u << 4) /**< \brief (TC_CMR) The clock is not gated by an external signal. */ +#define TC_CMR_BURST_XC0 (0x1u << 4) /**< \brief (TC_CMR) XC0 is ANDed with the selected clock. */ +#define TC_CMR_BURST_XC1 (0x2u << 4) /**< \brief (TC_CMR) XC1 is ANDed with the selected clock. */ +#define TC_CMR_BURST_XC2 (0x3u << 4) /**< \brief (TC_CMR) XC2 is ANDed with the selected clock. */ +#define TC_CMR_LDBSTOP (0x1u << 6) /**< \brief (TC_CMR) Counter Clock Stopped with RB Loading */ +#define TC_CMR_LDBDIS (0x1u << 7) /**< \brief (TC_CMR) Counter Clock Disable with RB Loading */ +#define TC_CMR_ETRGEDG_Pos 8 +#define TC_CMR_ETRGEDG_Msk (0x3u << TC_CMR_ETRGEDG_Pos) /**< \brief (TC_CMR) External Trigger Edge Selection */ +#define TC_CMR_ETRGEDG_NONE (0x0u << 8) /**< \brief (TC_CMR) The clock is not gated by an external signal. */ +#define TC_CMR_ETRGEDG_RISING (0x1u << 8) /**< \brief (TC_CMR) Rising edge */ +#define TC_CMR_ETRGEDG_FALLING (0x2u << 8) /**< \brief (TC_CMR) Falling edge */ +#define TC_CMR_ETRGEDG_EDGE (0x3u << 8) /**< \brief (TC_CMR) Each edge */ +#define TC_CMR_ABETRG (0x1u << 10) /**< \brief (TC_CMR) TIOA or TIOB External Trigger Selection */ +#define TC_CMR_CPCTRG (0x1u << 14) /**< \brief (TC_CMR) RC Compare Trigger Enable */ +#define TC_CMR_WAVE (0x1u << 15) /**< \brief (TC_CMR) */ +#define TC_CMR_LDRA_Pos 16 +#define TC_CMR_LDRA_Msk (0x3u << TC_CMR_LDRA_Pos) /**< \brief (TC_CMR) RA Loading Selection */ +#define TC_CMR_LDRA_NONE (0x0u << 16) /**< \brief (TC_CMR) None */ +#define TC_CMR_LDRA_RISING (0x1u << 16) /**< \brief (TC_CMR) Rising edge of TIOA */ +#define TC_CMR_LDRA_FALLING (0x2u << 16) /**< \brief (TC_CMR) Falling edge of TIOA */ +#define TC_CMR_LDRA_EDGE (0x3u << 16) /**< \brief (TC_CMR) Each edge of TIOA */ +#define TC_CMR_LDRB_Pos 18 +#define TC_CMR_LDRB_Msk (0x3u << TC_CMR_LDRB_Pos) /**< \brief (TC_CMR) RB Loading Selection */ +#define TC_CMR_LDRB_NONE (0x0u << 18) /**< \brief (TC_CMR) None */ +#define TC_CMR_LDRB_RISING (0x1u << 18) /**< \brief (TC_CMR) Rising edge of TIOA */ +#define TC_CMR_LDRB_FALLING (0x2u << 18) /**< \brief (TC_CMR) Falling edge of TIOA */ +#define TC_CMR_LDRB_EDGE (0x3u << 18) /**< \brief (TC_CMR) Each edge of TIOA */ +#define TC_CMR_CPCSTOP (0x1u << 6) /**< \brief (TC_CMR) Counter Clock Stopped with RC Compare */ +#define TC_CMR_CPCDIS (0x1u << 7) /**< \brief (TC_CMR) Counter Clock Disable with RC Compare */ +#define TC_CMR_EEVTEDG_Pos 8 +#define TC_CMR_EEVTEDG_Msk (0x3u << TC_CMR_EEVTEDG_Pos) /**< \brief (TC_CMR) External Event Edge Selection */ +#define TC_CMR_EEVTEDG_NONE (0x0u << 8) /**< \brief (TC_CMR) None */ +#define TC_CMR_EEVTEDG_RISING (0x1u << 8) /**< \brief (TC_CMR) Rising edge */ +#define TC_CMR_EEVTEDG_FALLING (0x2u << 8) /**< \brief (TC_CMR) Falling edge */ +#define TC_CMR_EEVTEDG_EDGE (0x3u << 8) /**< \brief (TC_CMR) Each edge */ +#define TC_CMR_EEVT_Pos 10 +#define TC_CMR_EEVT_Msk (0x3u << TC_CMR_EEVT_Pos) /**< \brief (TC_CMR) External Event Selection */ +#define TC_CMR_EEVT_TIOB (0x0u << 10) /**< \brief (TC_CMR) TIOB */ +#define TC_CMR_EEVT_XC0 (0x1u << 10) /**< \brief (TC_CMR) XC0 */ +#define TC_CMR_EEVT_XC1 (0x2u << 10) /**< \brief (TC_CMR) XC1 */ +#define TC_CMR_EEVT_XC2 (0x3u << 10) /**< \brief (TC_CMR) XC2 */ +#define TC_CMR_ENETRG (0x1u << 12) /**< \brief (TC_CMR) External Event Trigger Enable */ +#define TC_CMR_WAVSEL_Pos 13 +#define TC_CMR_WAVSEL_Msk (0x3u << TC_CMR_WAVSEL_Pos) /**< \brief (TC_CMR) Waveform Selection */ +#define TC_CMR_WAVSEL_UP (0x0u << 13) /**< \brief (TC_CMR) UP mode without automatic trigger on RC Compare */ +#define TC_CMR_WAVSEL_UPDOWN (0x1u << 13) /**< \brief (TC_CMR) UPDOWN mode without automatic trigger on RC Compare */ +#define TC_CMR_WAVSEL_UP_RC (0x2u << 13) /**< \brief (TC_CMR) UP mode with automatic trigger on RC Compare */ +#define TC_CMR_WAVSEL_UPDOWN_RC (0x3u << 13) /**< \brief (TC_CMR) UPDOWN mode with automatic trigger on RC Compare */ +#define TC_CMR_ACPA_Pos 16 +#define TC_CMR_ACPA_Msk (0x3u << TC_CMR_ACPA_Pos) /**< \brief (TC_CMR) RA Compare Effect on TIOA */ +#define TC_CMR_ACPA_NONE (0x0u << 16) /**< \brief (TC_CMR) None */ +#define TC_CMR_ACPA_SET (0x1u << 16) /**< \brief (TC_CMR) Set */ +#define TC_CMR_ACPA_CLEAR (0x2u << 16) /**< \brief (TC_CMR) Clear */ +#define TC_CMR_ACPA_TOGGLE (0x3u << 16) /**< \brief (TC_CMR) Toggle */ +#define TC_CMR_ACPC_Pos 18 +#define TC_CMR_ACPC_Msk (0x3u << TC_CMR_ACPC_Pos) /**< \brief (TC_CMR) RC Compare Effect on TIOA */ +#define TC_CMR_ACPC_NONE (0x0u << 18) /**< \brief (TC_CMR) None */ +#define TC_CMR_ACPC_SET (0x1u << 18) /**< \brief (TC_CMR) Set */ +#define TC_CMR_ACPC_CLEAR (0x2u << 18) /**< \brief (TC_CMR) Clear */ +#define TC_CMR_ACPC_TOGGLE (0x3u << 18) /**< \brief (TC_CMR) Toggle */ +#define TC_CMR_AEEVT_Pos 20 +#define TC_CMR_AEEVT_Msk (0x3u << TC_CMR_AEEVT_Pos) /**< \brief (TC_CMR) External Event Effect on TIOA */ +#define TC_CMR_AEEVT_NONE (0x0u << 20) /**< \brief (TC_CMR) None */ +#define TC_CMR_AEEVT_SET (0x1u << 20) /**< \brief (TC_CMR) Set */ +#define TC_CMR_AEEVT_CLEAR (0x2u << 20) /**< \brief (TC_CMR) Clear */ +#define TC_CMR_AEEVT_TOGGLE (0x3u << 20) /**< \brief (TC_CMR) Toggle */ +#define TC_CMR_ASWTRG_Pos 22 +#define TC_CMR_ASWTRG_Msk (0x3u << TC_CMR_ASWTRG_Pos) /**< \brief (TC_CMR) Software Trigger Effect on TIOA */ +#define TC_CMR_ASWTRG_NONE (0x0u << 22) /**< \brief (TC_CMR) None */ +#define TC_CMR_ASWTRG_SET (0x1u << 22) /**< \brief (TC_CMR) Set */ +#define TC_CMR_ASWTRG_CLEAR (0x2u << 22) /**< \brief (TC_CMR) Clear */ +#define TC_CMR_ASWTRG_TOGGLE (0x3u << 22) /**< \brief (TC_CMR) Toggle */ +#define TC_CMR_BCPB_Pos 24 +#define TC_CMR_BCPB_Msk (0x3u << TC_CMR_BCPB_Pos) /**< \brief (TC_CMR) RB Compare Effect on TIOB */ +#define TC_CMR_BCPB_NONE (0x0u << 24) /**< \brief (TC_CMR) None */ +#define TC_CMR_BCPB_SET (0x1u << 24) /**< \brief (TC_CMR) Set */ +#define TC_CMR_BCPB_CLEAR (0x2u << 24) /**< \brief (TC_CMR) Clear */ +#define TC_CMR_BCPB_TOGGLE (0x3u << 24) /**< \brief (TC_CMR) Toggle */ +#define TC_CMR_BCPC_Pos 26 +#define TC_CMR_BCPC_Msk (0x3u << TC_CMR_BCPC_Pos) /**< \brief (TC_CMR) RC Compare Effect on TIOB */ +#define TC_CMR_BCPC_NONE (0x0u << 26) /**< \brief (TC_CMR) None */ +#define TC_CMR_BCPC_SET (0x1u << 26) /**< \brief (TC_CMR) Set */ +#define TC_CMR_BCPC_CLEAR (0x2u << 26) /**< \brief (TC_CMR) Clear */ +#define TC_CMR_BCPC_TOGGLE (0x3u << 26) /**< \brief (TC_CMR) Toggle */ +#define TC_CMR_BEEVT_Pos 28 +#define TC_CMR_BEEVT_Msk (0x3u << TC_CMR_BEEVT_Pos) /**< \brief (TC_CMR) External Event Effect on TIOB */ +#define TC_CMR_BEEVT_NONE (0x0u << 28) /**< \brief (TC_CMR) None */ +#define TC_CMR_BEEVT_SET (0x1u << 28) /**< \brief (TC_CMR) Set */ +#define TC_CMR_BEEVT_CLEAR (0x2u << 28) /**< \brief (TC_CMR) Clear */ +#define TC_CMR_BEEVT_TOGGLE (0x3u << 28) /**< \brief (TC_CMR) Toggle */ +#define TC_CMR_BSWTRG_Pos 30 +#define TC_CMR_BSWTRG_Msk (0x3u << TC_CMR_BSWTRG_Pos) /**< \brief (TC_CMR) Software Trigger Effect on TIOB */ +#define TC_CMR_BSWTRG_NONE (0x0u << 30) /**< \brief (TC_CMR) None */ +#define TC_CMR_BSWTRG_SET (0x1u << 30) /**< \brief (TC_CMR) Set */ +#define TC_CMR_BSWTRG_CLEAR (0x2u << 30) /**< \brief (TC_CMR) Clear */ +#define TC_CMR_BSWTRG_TOGGLE (0x3u << 30) /**< \brief (TC_CMR) Toggle */ +/* -------- TC_SMMR : (TC Offset: N/A) Stepper Motor Mode Register -------- */ +#define TC_SMMR_GCEN (0x1u << 0) /**< \brief (TC_SMMR) Gray Count Enable */ +#define TC_SMMR_DOWN (0x1u << 1) /**< \brief (TC_SMMR) DOWN Count */ +/* -------- TC_CV : (TC Offset: N/A) Counter Value -------- */ +#define TC_CV_CV_Pos 0 +#define TC_CV_CV_Msk (0xffffffffu << TC_CV_CV_Pos) /**< \brief (TC_CV) Counter Value */ +/* -------- TC_RA : (TC Offset: N/A) Register A -------- */ +#define TC_RA_RA_Pos 0 +#define TC_RA_RA_Msk (0xffffffffu << TC_RA_RA_Pos) /**< \brief (TC_RA) Register A */ +#define TC_RA_RA(value) ((TC_RA_RA_Msk & ((value) << TC_RA_RA_Pos))) +/* -------- TC_RB : (TC Offset: N/A) Register B -------- */ +#define TC_RB_RB_Pos 0 +#define TC_RB_RB_Msk (0xffffffffu << TC_RB_RB_Pos) /**< \brief (TC_RB) Register B */ +#define TC_RB_RB(value) ((TC_RB_RB_Msk & ((value) << TC_RB_RB_Pos))) +/* -------- TC_RC : (TC Offset: N/A) Register C -------- */ +#define TC_RC_RC_Pos 0 +#define TC_RC_RC_Msk (0xffffffffu << TC_RC_RC_Pos) /**< \brief (TC_RC) Register C */ +#define TC_RC_RC(value) ((TC_RC_RC_Msk & ((value) << TC_RC_RC_Pos))) +/* -------- TC_SR : (TC Offset: N/A) Status Register -------- */ +#define TC_SR_COVFS (0x1u << 0) /**< \brief (TC_SR) Counter Overflow Status */ +#define TC_SR_LOVRS (0x1u << 1) /**< \brief (TC_SR) Load Overrun Status */ +#define TC_SR_CPAS (0x1u << 2) /**< \brief (TC_SR) RA Compare Status */ +#define TC_SR_CPBS (0x1u << 3) /**< \brief (TC_SR) RB Compare Status */ +#define TC_SR_CPCS (0x1u << 4) /**< \brief (TC_SR) RC Compare Status */ +#define TC_SR_LDRAS (0x1u << 5) /**< \brief (TC_SR) RA Loading Status */ +#define TC_SR_LDRBS (0x1u << 6) /**< \brief (TC_SR) RB Loading Status */ +#define TC_SR_ETRGS (0x1u << 7) /**< \brief (TC_SR) External Trigger Status */ +#define TC_SR_CLKSTA (0x1u << 16) /**< \brief (TC_SR) Clock Enabling Status */ +#define TC_SR_MTIOA (0x1u << 17) /**< \brief (TC_SR) TIOA Mirror */ +#define TC_SR_MTIOB (0x1u << 18) /**< \brief (TC_SR) TIOB Mirror */ +/* -------- TC_IER : (TC Offset: N/A) Interrupt Enable Register -------- */ +#define TC_IER_COVFS (0x1u << 0) /**< \brief (TC_IER) Counter Overflow */ +#define TC_IER_LOVRS (0x1u << 1) /**< \brief (TC_IER) Load Overrun */ +#define TC_IER_CPAS (0x1u << 2) /**< \brief (TC_IER) RA Compare */ +#define TC_IER_CPBS (0x1u << 3) /**< \brief (TC_IER) RB Compare */ +#define TC_IER_CPCS (0x1u << 4) /**< \brief (TC_IER) RC Compare */ +#define TC_IER_LDRAS (0x1u << 5) /**< \brief (TC_IER) RA Loading */ +#define TC_IER_LDRBS (0x1u << 6) /**< \brief (TC_IER) RB Loading */ +#define TC_IER_ETRGS (0x1u << 7) /**< \brief (TC_IER) External Trigger */ +/* -------- TC_IDR : (TC Offset: N/A) Interrupt Disable Register -------- */ +#define TC_IDR_COVFS (0x1u << 0) /**< \brief (TC_IDR) Counter Overflow */ +#define TC_IDR_LOVRS (0x1u << 1) /**< \brief (TC_IDR) Load Overrun */ +#define TC_IDR_CPAS (0x1u << 2) /**< \brief (TC_IDR) RA Compare */ +#define TC_IDR_CPBS (0x1u << 3) /**< \brief (TC_IDR) RB Compare */ +#define TC_IDR_CPCS (0x1u << 4) /**< \brief (TC_IDR) RC Compare */ +#define TC_IDR_LDRAS (0x1u << 5) /**< \brief (TC_IDR) RA Loading */ +#define TC_IDR_LDRBS (0x1u << 6) /**< \brief (TC_IDR) RB Loading */ +#define TC_IDR_ETRGS (0x1u << 7) /**< \brief (TC_IDR) External Trigger */ +/* -------- TC_IMR : (TC Offset: N/A) Interrupt Mask Register -------- */ +#define TC_IMR_COVFS (0x1u << 0) /**< \brief (TC_IMR) Counter Overflow */ +#define TC_IMR_LOVRS (0x1u << 1) /**< \brief (TC_IMR) Load Overrun */ +#define TC_IMR_CPAS (0x1u << 2) /**< \brief (TC_IMR) RA Compare */ +#define TC_IMR_CPBS (0x1u << 3) /**< \brief (TC_IMR) RB Compare */ +#define TC_IMR_CPCS (0x1u << 4) /**< \brief (TC_IMR) RC Compare */ +#define TC_IMR_LDRAS (0x1u << 5) /**< \brief (TC_IMR) RA Loading */ +#define TC_IMR_LDRBS (0x1u << 6) /**< \brief (TC_IMR) RB Loading */ +#define TC_IMR_ETRGS (0x1u << 7) /**< \brief (TC_IMR) External Trigger */ +/* -------- TC_BCR : (TC Offset: 0xC0) Block Control Register -------- */ +#define TC_BCR_SYNC (0x1u << 0) /**< \brief (TC_BCR) Synchro Command */ +/* -------- TC_BMR : (TC Offset: 0xC4) Block Mode Register -------- */ +#define TC_BMR_TC0XC0S_Pos 0 +#define TC_BMR_TC0XC0S_Msk (0x3u << TC_BMR_TC0XC0S_Pos) /**< \brief (TC_BMR) External Clock Signal 0 Selection */ +#define TC_BMR_TC0XC0S_TCLK0 (0x0u << 0) /**< \brief (TC_BMR) Signal connected to XC0: TCLK0 */ +#define TC_BMR_TC0XC0S_TIOA1 (0x2u << 0) /**< \brief (TC_BMR) Signal connected to XC0: TIOA1 */ +#define TC_BMR_TC0XC0S_TIOA2 (0x3u << 0) /**< \brief (TC_BMR) Signal connected to XC0: TIOA2 */ +#define TC_BMR_TC1XC1S_Pos 2 +#define TC_BMR_TC1XC1S_Msk (0x3u << TC_BMR_TC1XC1S_Pos) /**< \brief (TC_BMR) External Clock Signal 1 Selection */ +#define TC_BMR_TC1XC1S_TCLK1 (0x0u << 2) /**< \brief (TC_BMR) Signal connected to XC1: TCLK1 */ +#define TC_BMR_TC1XC1S_TIOA0 (0x2u << 2) /**< \brief (TC_BMR) Signal connected to XC1: TIOA0 */ +#define TC_BMR_TC1XC1S_TIOA2 (0x3u << 2) /**< \brief (TC_BMR) Signal connected to XC1: TIOA2 */ +#define TC_BMR_TC2XC2S_Pos 4 +#define TC_BMR_TC2XC2S_Msk (0x3u << TC_BMR_TC2XC2S_Pos) /**< \brief (TC_BMR) External Clock Signal 2 Selection */ +#define TC_BMR_TC2XC2S_TCLK2 (0x0u << 4) /**< \brief (TC_BMR) Signal connected to XC2: TCLK2 */ +#define TC_BMR_TC2XC2S_TIOA1 (0x2u << 4) /**< \brief (TC_BMR) Signal connected to XC2: TIOA1 */ +#define TC_BMR_TC2XC2S_TIOA2 (0x3u << 4) /**< \brief (TC_BMR) Signal connected to XC2: TIOA2 */ +#define TC_BMR_QDEN (0x1u << 8) /**< \brief (TC_BMR) Quadrature Decoder ENabled */ +#define TC_BMR_POSEN (0x1u << 9) /**< \brief (TC_BMR) POSition ENabled */ +#define TC_BMR_SPEEDEN (0x1u << 10) /**< \brief (TC_BMR) SPEED ENabled */ +#define TC_BMR_QDTRANS (0x1u << 11) /**< \brief (TC_BMR) Quadrature Decoding TRANSparent */ +#define TC_BMR_EDGPHA (0x1u << 12) /**< \brief (TC_BMR) EDGe on PHA count mode */ +#define TC_BMR_INVA (0x1u << 13) /**< \brief (TC_BMR) INVerted phA */ +#define TC_BMR_INVB (0x1u << 14) /**< \brief (TC_BMR) INVerted phB */ +#define TC_BMR_INVIDX (0x1u << 15) /**< \brief (TC_BMR) INVerted InDeX */ +#define TC_BMR_SWAP (0x1u << 16) /**< \brief (TC_BMR) SWAP PHA and PHB */ +#define TC_BMR_IDXPHB (0x1u << 17) /**< \brief (TC_BMR) InDeX pin is PHB pin */ +#define TC_BMR_FILTER (0x1u << 19) /**< \brief (TC_BMR) */ +#define TC_BMR_MAXFILT_Pos 20 +#define TC_BMR_MAXFILT_Msk (0x3fu << TC_BMR_MAXFILT_Pos) /**< \brief (TC_BMR) MAXimum FILTer */ +#define TC_BMR_MAXFILT(value) ((TC_BMR_MAXFILT_Msk & ((value) << TC_BMR_MAXFILT_Pos))) +/* -------- TC_QIER : (TC Offset: 0xC8) QDEC Interrupt Enable Register -------- */ +#define TC_QIER_IDX (0x1u << 0) /**< \brief (TC_QIER) InDeX */ +#define TC_QIER_DIRCHG (0x1u << 1) /**< \brief (TC_QIER) DIRection CHanGe */ +#define TC_QIER_QERR (0x1u << 2) /**< \brief (TC_QIER) Quadrature ERRor */ +/* -------- TC_QIDR : (TC Offset: 0xCC) QDEC Interrupt Disable Register -------- */ +#define TC_QIDR_IDX (0x1u << 0) /**< \brief (TC_QIDR) InDeX */ +#define TC_QIDR_DIRCHG (0x1u << 1) /**< \brief (TC_QIDR) DIRection CHanGe */ +#define TC_QIDR_QERR (0x1u << 2) /**< \brief (TC_QIDR) Quadrature ERRor */ +/* -------- TC_QIMR : (TC Offset: 0xD0) QDEC Interrupt Mask Register -------- */ +#define TC_QIMR_IDX (0x1u << 0) /**< \brief (TC_QIMR) InDeX */ +#define TC_QIMR_DIRCHG (0x1u << 1) /**< \brief (TC_QIMR) DIRection CHanGe */ +#define TC_QIMR_QERR (0x1u << 2) /**< \brief (TC_QIMR) Quadrature ERRor */ +/* -------- TC_QISR : (TC Offset: 0xD4) QDEC Interrupt Status Register -------- */ +#define TC_QISR_IDX (0x1u << 0) /**< \brief (TC_QISR) InDeX */ +#define TC_QISR_DIRCHG (0x1u << 1) /**< \brief (TC_QISR) DIRection CHanGe */ +#define TC_QISR_QERR (0x1u << 2) /**< \brief (TC_QISR) Quadrature ERRor */ +#define TC_QISR_DIR (0x1u << 8) /**< \brief (TC_QISR) Direction */ +/* -------- TC_FMR : (TC Offset: 0xD8) Fault Mode Register -------- */ +#define TC_FMR_ENCF0 (0x1u << 0) /**< \brief (TC_FMR) ENable Compare Fault Channel 0 */ +#define TC_FMR_ENCF1 (0x1u << 1) /**< \brief (TC_FMR) ENable Compare Fault Channel 1 */ +/* -------- TC_WPMR : (TC Offset: 0xE4) Write Protect Mode Register -------- */ +#define TC_WPMR_WPEN (0x1u << 0) /**< \brief (TC_WPMR) Write Protect Enable */ +#define TC_WPMR_WPKEY_Pos 8 +#define TC_WPMR_WPKEY_Msk (0xffffffu << TC_WPMR_WPKEY_Pos) /**< \brief (TC_WPMR) Write Protect KEY */ +#define TC_WPMR_WPKEY(value) ((TC_WPMR_WPKEY_Msk & ((value) << TC_WPMR_WPKEY_Pos))) + +/*@}*/ + + +#endif /* _SAM4S_TC_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_twi.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_twi.h new file mode 100644 index 0000000..9f40aa9 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_twi.h
@@ -0,0 +1,227 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_TWI_COMPONENT_ +#define _SAM4S_TWI_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Two-wire Interface */ +/* ============================================================================= */ +/** \addtogroup SAM4S_TWI Two-wire Interface */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Twi hardware registers */ +typedef struct { + WoReg TWI_CR; /**< \brief (Twi Offset: 0x00) Control Register */ + RwReg TWI_MMR; /**< \brief (Twi Offset: 0x04) Master Mode Register */ + RwReg TWI_SMR; /**< \brief (Twi Offset: 0x08) Slave Mode Register */ + RwReg TWI_IADR; /**< \brief (Twi Offset: 0x0C) Internal Address Register */ + RwReg TWI_CWGR; /**< \brief (Twi Offset: 0x10) Clock Waveform Generator Register */ + RoReg Reserved1[3]; + RoReg TWI_SR; /**< \brief (Twi Offset: 0x20) Status Register */ + WoReg TWI_IER; /**< \brief (Twi Offset: 0x24) Interrupt Enable Register */ + WoReg TWI_IDR; /**< \brief (Twi Offset: 0x28) Interrupt Disable Register */ + RoReg TWI_IMR; /**< \brief (Twi Offset: 0x2C) Interrupt Mask Register */ + RoReg TWI_RHR; /**< \brief (Twi Offset: 0x30) Receive Holding Register */ + WoReg TWI_THR; /**< \brief (Twi Offset: 0x34) Transmit Holding Register */ + RoReg Reserved2[50]; + RwReg TWI_RPR; /**< \brief (Twi Offset: 0x100) Receive Pointer Register */ + RwReg TWI_RCR; /**< \brief (Twi Offset: 0x104) Receive Counter Register */ + RwReg TWI_TPR; /**< \brief (Twi Offset: 0x108) Transmit Pointer Register */ + RwReg TWI_TCR; /**< \brief (Twi Offset: 0x10C) Transmit Counter Register */ + RwReg TWI_RNPR; /**< \brief (Twi Offset: 0x110) Receive Next Pointer Register */ + RwReg TWI_RNCR; /**< \brief (Twi Offset: 0x114) Receive Next Counter Register */ + RwReg TWI_TNPR; /**< \brief (Twi Offset: 0x118) Transmit Next Pointer Register */ + RwReg TWI_TNCR; /**< \brief (Twi Offset: 0x11C) Transmit Next Counter Register */ + WoReg TWI_PTCR; /**< \brief (Twi Offset: 0x120) Transfer Control Register */ + RoReg TWI_PTSR; /**< \brief (Twi Offset: 0x124) Transfer Status Register */ +} Twi; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- TWI_CR : (TWI Offset: 0x00) Control Register -------- */ +#define TWI_CR_START (0x1u << 0) /**< \brief (TWI_CR) Send a START Condition */ +#define TWI_CR_STOP (0x1u << 1) /**< \brief (TWI_CR) Send a STOP Condition */ +#define TWI_CR_MSEN (0x1u << 2) /**< \brief (TWI_CR) TWI Master Mode Enabled */ +#define TWI_CR_MSDIS (0x1u << 3) /**< \brief (TWI_CR) TWI Master Mode Disabled */ +#define TWI_CR_SVEN (0x1u << 4) /**< \brief (TWI_CR) TWI Slave Mode Enabled */ +#define TWI_CR_SVDIS (0x1u << 5) /**< \brief (TWI_CR) TWI Slave Mode Disabled */ +#define TWI_CR_QUICK (0x1u << 6) /**< \brief (TWI_CR) SMBUS Quick Command */ +#define TWI_CR_SWRST (0x1u << 7) /**< \brief (TWI_CR) Software Reset */ +/* -------- TWI_MMR : (TWI Offset: 0x04) Master Mode Register -------- */ +#define TWI_MMR_IADRSZ_Pos 8 +#define TWI_MMR_IADRSZ_Msk (0x3u << TWI_MMR_IADRSZ_Pos) /**< \brief (TWI_MMR) Internal Device Address Size */ +#define TWI_MMR_IADRSZ_NONE (0x0u << 8) /**< \brief (TWI_MMR) No internal device address */ +#define TWI_MMR_IADRSZ_1_BYTE (0x1u << 8) /**< \brief (TWI_MMR) One-byte internal device address */ +#define TWI_MMR_IADRSZ_2_BYTE (0x2u << 8) /**< \brief (TWI_MMR) Two-byte internal device address */ +#define TWI_MMR_IADRSZ_3_BYTE (0x3u << 8) /**< \brief (TWI_MMR) Three-byte internal device address */ +#define TWI_MMR_MREAD (0x1u << 12) /**< \brief (TWI_MMR) Master Read Direction */ +#define TWI_MMR_DADR_Pos 16 +#define TWI_MMR_DADR_Msk (0x7fu << TWI_MMR_DADR_Pos) /**< \brief (TWI_MMR) Device Address */ +#define TWI_MMR_DADR(value) ((TWI_MMR_DADR_Msk & ((value) << TWI_MMR_DADR_Pos))) +/* -------- TWI_SMR : (TWI Offset: 0x08) Slave Mode Register -------- */ +#define TWI_SMR_SADR_Pos 16 +#define TWI_SMR_SADR_Msk (0x7fu << TWI_SMR_SADR_Pos) /**< \brief (TWI_SMR) Slave Address */ +#define TWI_SMR_SADR(value) ((TWI_SMR_SADR_Msk & ((value) << TWI_SMR_SADR_Pos))) +/* -------- TWI_IADR : (TWI Offset: 0x0C) Internal Address Register -------- */ +#define TWI_IADR_IADR_Pos 0 +#define TWI_IADR_IADR_Msk (0xffffffu << TWI_IADR_IADR_Pos) /**< \brief (TWI_IADR) Internal Address */ +#define TWI_IADR_IADR(value) ((TWI_IADR_IADR_Msk & ((value) << TWI_IADR_IADR_Pos))) +/* -------- TWI_CWGR : (TWI Offset: 0x10) Clock Waveform Generator Register -------- */ +#define TWI_CWGR_CLDIV_Pos 0 +#define TWI_CWGR_CLDIV_Msk (0xffu << TWI_CWGR_CLDIV_Pos) /**< \brief (TWI_CWGR) Clock Low Divider */ +#define TWI_CWGR_CLDIV(value) ((TWI_CWGR_CLDIV_Msk & ((value) << TWI_CWGR_CLDIV_Pos))) +#define TWI_CWGR_CHDIV_Pos 8 +#define TWI_CWGR_CHDIV_Msk (0xffu << TWI_CWGR_CHDIV_Pos) /**< \brief (TWI_CWGR) Clock High Divider */ +#define TWI_CWGR_CHDIV(value) ((TWI_CWGR_CHDIV_Msk & ((value) << TWI_CWGR_CHDIV_Pos))) +#define TWI_CWGR_CKDIV_Pos 16 +#define TWI_CWGR_CKDIV_Msk (0x7u << TWI_CWGR_CKDIV_Pos) /**< \brief (TWI_CWGR) Clock Divider */ +#define TWI_CWGR_CKDIV(value) ((TWI_CWGR_CKDIV_Msk & ((value) << TWI_CWGR_CKDIV_Pos))) +/* -------- TWI_SR : (TWI Offset: 0x20) Status Register -------- */ +#define TWI_SR_TXCOMP (0x1u << 0) /**< \brief (TWI_SR) Transmission Completed (automatically set / reset) */ +#define TWI_SR_RXRDY (0x1u << 1) /**< \brief (TWI_SR) Receive Holding Register Ready (automatically set / reset) */ +#define TWI_SR_TXRDY (0x1u << 2) /**< \brief (TWI_SR) Transmit Holding Register Ready (automatically set / reset) */ +#define TWI_SR_SVREAD (0x1u << 3) /**< \brief (TWI_SR) Slave Read (automatically set / reset) */ +#define TWI_SR_SVACC (0x1u << 4) /**< \brief (TWI_SR) Slave Access (automatically set / reset) */ +#define TWI_SR_GACC (0x1u << 5) /**< \brief (TWI_SR) General Call Access (clear on read) */ +#define TWI_SR_OVRE (0x1u << 6) /**< \brief (TWI_SR) Overrun Error (clear on read) */ +#define TWI_SR_NACK (0x1u << 8) /**< \brief (TWI_SR) Not Acknowledged (clear on read) */ +#define TWI_SR_ARBLST (0x1u << 9) /**< \brief (TWI_SR) Arbitration Lost (clear on read) */ +#define TWI_SR_SCLWS (0x1u << 10) /**< \brief (TWI_SR) Clock Wait State (automatically set / reset) */ +#define TWI_SR_EOSACC (0x1u << 11) /**< \brief (TWI_SR) End Of Slave Access (clear on read) */ +#define TWI_SR_ENDRX (0x1u << 12) /**< \brief (TWI_SR) End of RX buffer */ +#define TWI_SR_ENDTX (0x1u << 13) /**< \brief (TWI_SR) End of TX buffer */ +#define TWI_SR_RXBUFF (0x1u << 14) /**< \brief (TWI_SR) RX Buffer Full */ +#define TWI_SR_TXBUFE (0x1u << 15) /**< \brief (TWI_SR) TX Buffer Empty */ +/* -------- TWI_IER : (TWI Offset: 0x24) Interrupt Enable Register -------- */ +#define TWI_IER_TXCOMP (0x1u << 0) /**< \brief (TWI_IER) Transmission Completed Interrupt Enable */ +#define TWI_IER_RXRDY (0x1u << 1) /**< \brief (TWI_IER) Receive Holding Register Ready Interrupt Enable */ +#define TWI_IER_TXRDY (0x1u << 2) /**< \brief (TWI_IER) Transmit Holding Register Ready Interrupt Enable */ +#define TWI_IER_SVACC (0x1u << 4) /**< \brief (TWI_IER) Slave Access Interrupt Enable */ +#define TWI_IER_GACC (0x1u << 5) /**< \brief (TWI_IER) General Call Access Interrupt Enable */ +#define TWI_IER_OVRE (0x1u << 6) /**< \brief (TWI_IER) Overrun Error Interrupt Enable */ +#define TWI_IER_NACK (0x1u << 8) /**< \brief (TWI_IER) Not Acknowledge Interrupt Enable */ +#define TWI_IER_ARBLST (0x1u << 9) /**< \brief (TWI_IER) Arbitration Lost Interrupt Enable */ +#define TWI_IER_SCL_WS (0x1u << 10) /**< \brief (TWI_IER) Clock Wait State Interrupt Enable */ +#define TWI_IER_EOSACC (0x1u << 11) /**< \brief (TWI_IER) End Of Slave Access Interrupt Enable */ +#define TWI_IER_ENDRX (0x1u << 12) /**< \brief (TWI_IER) End of Receive Buffer Interrupt Enable */ +#define TWI_IER_ENDTX (0x1u << 13) /**< \brief (TWI_IER) End of Transmit Buffer Interrupt Enable */ +#define TWI_IER_RXBUFF (0x1u << 14) /**< \brief (TWI_IER) Receive Buffer Full Interrupt Enable */ +#define TWI_IER_TXBUFE (0x1u << 15) /**< \brief (TWI_IER) Transmit Buffer Empty Interrupt Enable */ +/* -------- TWI_IDR : (TWI Offset: 0x28) Interrupt Disable Register -------- */ +#define TWI_IDR_TXCOMP (0x1u << 0) /**< \brief (TWI_IDR) Transmission Completed Interrupt Disable */ +#define TWI_IDR_RXRDY (0x1u << 1) /**< \brief (TWI_IDR) Receive Holding Register Ready Interrupt Disable */ +#define TWI_IDR_TXRDY (0x1u << 2) /**< \brief (TWI_IDR) Transmit Holding Register Ready Interrupt Disable */ +#define TWI_IDR_SVACC (0x1u << 4) /**< \brief (TWI_IDR) Slave Access Interrupt Disable */ +#define TWI_IDR_GACC (0x1u << 5) /**< \brief (TWI_IDR) General Call Access Interrupt Disable */ +#define TWI_IDR_OVRE (0x1u << 6) /**< \brief (TWI_IDR) Overrun Error Interrupt Disable */ +#define TWI_IDR_NACK (0x1u << 8) /**< \brief (TWI_IDR) Not Acknowledge Interrupt Disable */ +#define TWI_IDR_ARBLST (0x1u << 9) /**< \brief (TWI_IDR) Arbitration Lost Interrupt Disable */ +#define TWI_IDR_SCL_WS (0x1u << 10) /**< \brief (TWI_IDR) Clock Wait State Interrupt Disable */ +#define TWI_IDR_EOSACC (0x1u << 11) /**< \brief (TWI_IDR) End Of Slave Access Interrupt Disable */ +#define TWI_IDR_ENDRX (0x1u << 12) /**< \brief (TWI_IDR) End of Receive Buffer Interrupt Disable */ +#define TWI_IDR_ENDTX (0x1u << 13) /**< \brief (TWI_IDR) End of Transmit Buffer Interrupt Disable */ +#define TWI_IDR_RXBUFF (0x1u << 14) /**< \brief (TWI_IDR) Receive Buffer Full Interrupt Disable */ +#define TWI_IDR_TXBUFE (0x1u << 15) /**< \brief (TWI_IDR) Transmit Buffer Empty Interrupt Disable */ +/* -------- TWI_IMR : (TWI Offset: 0x2C) Interrupt Mask Register -------- */ +#define TWI_IMR_TXCOMP (0x1u << 0) /**< \brief (TWI_IMR) Transmission Completed Interrupt Mask */ +#define TWI_IMR_RXRDY (0x1u << 1) /**< \brief (TWI_IMR) Receive Holding Register Ready Interrupt Mask */ +#define TWI_IMR_TXRDY (0x1u << 2) /**< \brief (TWI_IMR) Transmit Holding Register Ready Interrupt Mask */ +#define TWI_IMR_SVACC (0x1u << 4) /**< \brief (TWI_IMR) Slave Access Interrupt Mask */ +#define TWI_IMR_GACC (0x1u << 5) /**< \brief (TWI_IMR) General Call Access Interrupt Mask */ +#define TWI_IMR_OVRE (0x1u << 6) /**< \brief (TWI_IMR) Overrun Error Interrupt Mask */ +#define TWI_IMR_NACK (0x1u << 8) /**< \brief (TWI_IMR) Not Acknowledge Interrupt Mask */ +#define TWI_IMR_ARBLST (0x1u << 9) /**< \brief (TWI_IMR) Arbitration Lost Interrupt Mask */ +#define TWI_IMR_SCL_WS (0x1u << 10) /**< \brief (TWI_IMR) Clock Wait State Interrupt Mask */ +#define TWI_IMR_EOSACC (0x1u << 11) /**< \brief (TWI_IMR) End Of Slave Access Interrupt Mask */ +#define TWI_IMR_ENDRX (0x1u << 12) /**< \brief (TWI_IMR) End of Receive Buffer Interrupt Mask */ +#define TWI_IMR_ENDTX (0x1u << 13) /**< \brief (TWI_IMR) End of Transmit Buffer Interrupt Mask */ +#define TWI_IMR_RXBUFF (0x1u << 14) /**< \brief (TWI_IMR) Receive Buffer Full Interrupt Mask */ +#define TWI_IMR_TXBUFE (0x1u << 15) /**< \brief (TWI_IMR) Transmit Buffer Empty Interrupt Mask */ +/* -------- TWI_RHR : (TWI Offset: 0x30) Receive Holding Register -------- */ +#define TWI_RHR_RXDATA_Pos 0 +#define TWI_RHR_RXDATA_Msk (0xffu << TWI_RHR_RXDATA_Pos) /**< \brief (TWI_RHR) Master or Slave Receive Holding Data */ +/* -------- TWI_THR : (TWI Offset: 0x34) Transmit Holding Register -------- */ +#define TWI_THR_TXDATA_Pos 0 +#define TWI_THR_TXDATA_Msk (0xffu << TWI_THR_TXDATA_Pos) /**< \brief (TWI_THR) Master or Slave Transmit Holding Data */ +#define TWI_THR_TXDATA(value) ((TWI_THR_TXDATA_Msk & ((value) << TWI_THR_TXDATA_Pos))) +/* -------- TWI_RPR : (TWI Offset: 0x100) Receive Pointer Register -------- */ +#define TWI_RPR_RXPTR_Pos 0 +#define TWI_RPR_RXPTR_Msk (0xffffffffu << TWI_RPR_RXPTR_Pos) /**< \brief (TWI_RPR) Receive Pointer Register */ +#define TWI_RPR_RXPTR(value) ((TWI_RPR_RXPTR_Msk & ((value) << TWI_RPR_RXPTR_Pos))) +/* -------- TWI_RCR : (TWI Offset: 0x104) Receive Counter Register -------- */ +#define TWI_RCR_RXCTR_Pos 0 +#define TWI_RCR_RXCTR_Msk (0xffffu << TWI_RCR_RXCTR_Pos) /**< \brief (TWI_RCR) Receive Counter Register */ +#define TWI_RCR_RXCTR(value) ((TWI_RCR_RXCTR_Msk & ((value) << TWI_RCR_RXCTR_Pos))) +/* -------- TWI_TPR : (TWI Offset: 0x108) Transmit Pointer Register -------- */ +#define TWI_TPR_TXPTR_Pos 0 +#define TWI_TPR_TXPTR_Msk (0xffffffffu << TWI_TPR_TXPTR_Pos) /**< \brief (TWI_TPR) Transmit Counter Register */ +#define TWI_TPR_TXPTR(value) ((TWI_TPR_TXPTR_Msk & ((value) << TWI_TPR_TXPTR_Pos))) +/* -------- TWI_TCR : (TWI Offset: 0x10C) Transmit Counter Register -------- */ +#define TWI_TCR_TXCTR_Pos 0 +#define TWI_TCR_TXCTR_Msk (0xffffu << TWI_TCR_TXCTR_Pos) /**< \brief (TWI_TCR) Transmit Counter Register */ +#define TWI_TCR_TXCTR(value) ((TWI_TCR_TXCTR_Msk & ((value) << TWI_TCR_TXCTR_Pos))) +/* -------- TWI_RNPR : (TWI Offset: 0x110) Receive Next Pointer Register -------- */ +#define TWI_RNPR_RXNPTR_Pos 0 +#define TWI_RNPR_RXNPTR_Msk (0xffffffffu << TWI_RNPR_RXNPTR_Pos) /**< \brief (TWI_RNPR) Receive Next Pointer */ +#define TWI_RNPR_RXNPTR(value) ((TWI_RNPR_RXNPTR_Msk & ((value) << TWI_RNPR_RXNPTR_Pos))) +/* -------- TWI_RNCR : (TWI Offset: 0x114) Receive Next Counter Register -------- */ +#define TWI_RNCR_RXNCTR_Pos 0 +#define TWI_RNCR_RXNCTR_Msk (0xffffu << TWI_RNCR_RXNCTR_Pos) /**< \brief (TWI_RNCR) Receive Next Counter */ +#define TWI_RNCR_RXNCTR(value) ((TWI_RNCR_RXNCTR_Msk & ((value) << TWI_RNCR_RXNCTR_Pos))) +/* -------- TWI_TNPR : (TWI Offset: 0x118) Transmit Next Pointer Register -------- */ +#define TWI_TNPR_TXNPTR_Pos 0 +#define TWI_TNPR_TXNPTR_Msk (0xffffffffu << TWI_TNPR_TXNPTR_Pos) /**< \brief (TWI_TNPR) Transmit Next Pointer */ +#define TWI_TNPR_TXNPTR(value) ((TWI_TNPR_TXNPTR_Msk & ((value) << TWI_TNPR_TXNPTR_Pos))) +/* -------- TWI_TNCR : (TWI Offset: 0x11C) Transmit Next Counter Register -------- */ +#define TWI_TNCR_TXNCTR_Pos 0 +#define TWI_TNCR_TXNCTR_Msk (0xffffu << TWI_TNCR_TXNCTR_Pos) /**< \brief (TWI_TNCR) Transmit Counter Next */ +#define TWI_TNCR_TXNCTR(value) ((TWI_TNCR_TXNCTR_Msk & ((value) << TWI_TNCR_TXNCTR_Pos))) +/* -------- TWI_PTCR : (TWI Offset: 0x120) Transfer Control Register -------- */ +#define TWI_PTCR_RXTEN (0x1u << 0) /**< \brief (TWI_PTCR) Receiver Transfer Enable */ +#define TWI_PTCR_RXTDIS (0x1u << 1) /**< \brief (TWI_PTCR) Receiver Transfer Disable */ +#define TWI_PTCR_TXTEN (0x1u << 8) /**< \brief (TWI_PTCR) Transmitter Transfer Enable */ +#define TWI_PTCR_TXTDIS (0x1u << 9) /**< \brief (TWI_PTCR) Transmitter Transfer Disable */ +/* -------- TWI_PTSR : (TWI Offset: 0x124) Transfer Status Register -------- */ +#define TWI_PTSR_RXTEN (0x1u << 0) /**< \brief (TWI_PTSR) Receiver Transfer Enable */ +#define TWI_PTSR_TXTEN (0x1u << 8) /**< \brief (TWI_PTSR) Transmitter Transfer Enable */ + +/*@}*/ + + +#endif /* _SAM4S_TWI_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_uart.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_uart.h new file mode 100644 index 0000000..3b12b2b --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_uart.h
@@ -0,0 +1,195 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_UART_COMPONENT_ +#define _SAM4S_UART_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Universal Asynchronous Receiver Transmitter */ +/* ============================================================================= */ +/** \addtogroup SAM4S_UART Universal Asynchronous Receiver Transmitter */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Uart hardware registers */ +typedef struct { + WoReg UART_CR; /**< \brief (Uart Offset: 0x0000) Control Register */ + RwReg UART_MR; /**< \brief (Uart Offset: 0x0004) Mode Register */ + WoReg UART_IER; /**< \brief (Uart Offset: 0x0008) Interrupt Enable Register */ + WoReg UART_IDR; /**< \brief (Uart Offset: 0x000C) Interrupt Disable Register */ + RoReg UART_IMR; /**< \brief (Uart Offset: 0x0010) Interrupt Mask Register */ + RoReg UART_SR; /**< \brief (Uart Offset: 0x0014) Status Register */ + RoReg UART_RHR; /**< \brief (Uart Offset: 0x0018) Receive Holding Register */ + WoReg UART_THR; /**< \brief (Uart Offset: 0x001C) Transmit Holding Register */ + RwReg UART_BRGR; /**< \brief (Uart Offset: 0x0020) Baud Rate Generator Register */ + RoReg Reserved1[55]; + RwReg UART_RPR; /**< \brief (Uart Offset: 0x100) Receive Pointer Register */ + RwReg UART_RCR; /**< \brief (Uart Offset: 0x104) Receive Counter Register */ + RwReg UART_TPR; /**< \brief (Uart Offset: 0x108) Transmit Pointer Register */ + RwReg UART_TCR; /**< \brief (Uart Offset: 0x10C) Transmit Counter Register */ + RwReg UART_RNPR; /**< \brief (Uart Offset: 0x110) Receive Next Pointer Register */ + RwReg UART_RNCR; /**< \brief (Uart Offset: 0x114) Receive Next Counter Register */ + RwReg UART_TNPR; /**< \brief (Uart Offset: 0x118) Transmit Next Pointer Register */ + RwReg UART_TNCR; /**< \brief (Uart Offset: 0x11C) Transmit Next Counter Register */ + WoReg UART_PTCR; /**< \brief (Uart Offset: 0x120) Transfer Control Register */ + RoReg UART_PTSR; /**< \brief (Uart Offset: 0x124) Transfer Status Register */ +} Uart; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- UART_CR : (UART Offset: 0x0000) Control Register -------- */ +#define UART_CR_RSTRX (0x1u << 2) /**< \brief (UART_CR) Reset Receiver */ +#define UART_CR_RSTTX (0x1u << 3) /**< \brief (UART_CR) Reset Transmitter */ +#define UART_CR_RXEN (0x1u << 4) /**< \brief (UART_CR) Receiver Enable */ +#define UART_CR_RXDIS (0x1u << 5) /**< \brief (UART_CR) Receiver Disable */ +#define UART_CR_TXEN (0x1u << 6) /**< \brief (UART_CR) Transmitter Enable */ +#define UART_CR_TXDIS (0x1u << 7) /**< \brief (UART_CR) Transmitter Disable */ +#define UART_CR_RSTSTA (0x1u << 8) /**< \brief (UART_CR) Reset Status Bits */ +/* -------- UART_MR : (UART Offset: 0x0004) Mode Register -------- */ +#define UART_MR_PAR_Pos 9 +#define UART_MR_PAR_Msk (0x7u << UART_MR_PAR_Pos) /**< \brief (UART_MR) Parity Type */ +#define UART_MR_PAR_EVEN (0x0u << 9) /**< \brief (UART_MR) Even parity */ +#define UART_MR_PAR_ODD (0x1u << 9) /**< \brief (UART_MR) Odd parity */ +#define UART_MR_PAR_SPACE (0x2u << 9) /**< \brief (UART_MR) Space: parity forced to 0 */ +#define UART_MR_PAR_MARK (0x3u << 9) /**< \brief (UART_MR) Mark: parity forced to 1 */ +#define UART_MR_PAR_NO (0x4u << 9) /**< \brief (UART_MR) No parity */ +#define UART_MR_CHMODE_Pos 14 +#define UART_MR_CHMODE_Msk (0x3u << UART_MR_CHMODE_Pos) /**< \brief (UART_MR) Channel Mode */ +#define UART_MR_CHMODE_NORMAL (0x0u << 14) /**< \brief (UART_MR) Normal Mode */ +#define UART_MR_CHMODE_AUTOMATIC (0x1u << 14) /**< \brief (UART_MR) Automatic Echo */ +#define UART_MR_CHMODE_LOCAL_LOOPBACK (0x2u << 14) /**< \brief (UART_MR) Local Loopback */ +#define UART_MR_CHMODE_REMOTE_LOOPBACK (0x3u << 14) /**< \brief (UART_MR) Remote Loopback */ +/* -------- UART_IER : (UART Offset: 0x0008) Interrupt Enable Register -------- */ +#define UART_IER_RXRDY (0x1u << 0) /**< \brief (UART_IER) Enable RXRDY Interrupt */ +#define UART_IER_TXRDY (0x1u << 1) /**< \brief (UART_IER) Enable TXRDY Interrupt */ +#define UART_IER_ENDRX (0x1u << 3) /**< \brief (UART_IER) Enable End of Receive Transfer Interrupt */ +#define UART_IER_ENDTX (0x1u << 4) /**< \brief (UART_IER) Enable End of Transmit Interrupt */ +#define UART_IER_OVRE (0x1u << 5) /**< \brief (UART_IER) Enable Overrun Error Interrupt */ +#define UART_IER_FRAME (0x1u << 6) /**< \brief (UART_IER) Enable Framing Error Interrupt */ +#define UART_IER_PARE (0x1u << 7) /**< \brief (UART_IER) Enable Parity Error Interrupt */ +#define UART_IER_TXEMPTY (0x1u << 9) /**< \brief (UART_IER) Enable TXEMPTY Interrupt */ +#define UART_IER_TXBUFE (0x1u << 11) /**< \brief (UART_IER) Enable Buffer Empty Interrupt */ +#define UART_IER_RXBUFF (0x1u << 12) /**< \brief (UART_IER) Enable Buffer Full Interrupt */ +/* -------- UART_IDR : (UART Offset: 0x000C) Interrupt Disable Register -------- */ +#define UART_IDR_RXRDY (0x1u << 0) /**< \brief (UART_IDR) Disable RXRDY Interrupt */ +#define UART_IDR_TXRDY (0x1u << 1) /**< \brief (UART_IDR) Disable TXRDY Interrupt */ +#define UART_IDR_ENDRX (0x1u << 3) /**< \brief (UART_IDR) Disable End of Receive Transfer Interrupt */ +#define UART_IDR_ENDTX (0x1u << 4) /**< \brief (UART_IDR) Disable End of Transmit Interrupt */ +#define UART_IDR_OVRE (0x1u << 5) /**< \brief (UART_IDR) Disable Overrun Error Interrupt */ +#define UART_IDR_FRAME (0x1u << 6) /**< \brief (UART_IDR) Disable Framing Error Interrupt */ +#define UART_IDR_PARE (0x1u << 7) /**< \brief (UART_IDR) Disable Parity Error Interrupt */ +#define UART_IDR_TXEMPTY (0x1u << 9) /**< \brief (UART_IDR) Disable TXEMPTY Interrupt */ +#define UART_IDR_TXBUFE (0x1u << 11) /**< \brief (UART_IDR) Disable Buffer Empty Interrupt */ +#define UART_IDR_RXBUFF (0x1u << 12) /**< \brief (UART_IDR) Disable Buffer Full Interrupt */ +/* -------- UART_IMR : (UART Offset: 0x0010) Interrupt Mask Register -------- */ +#define UART_IMR_RXRDY (0x1u << 0) /**< \brief (UART_IMR) Mask RXRDY Interrupt */ +#define UART_IMR_TXRDY (0x1u << 1) /**< \brief (UART_IMR) Disable TXRDY Interrupt */ +#define UART_IMR_ENDRX (0x1u << 3) /**< \brief (UART_IMR) Mask End of Receive Transfer Interrupt */ +#define UART_IMR_ENDTX (0x1u << 4) /**< \brief (UART_IMR) Mask End of Transmit Interrupt */ +#define UART_IMR_OVRE (0x1u << 5) /**< \brief (UART_IMR) Mask Overrun Error Interrupt */ +#define UART_IMR_FRAME (0x1u << 6) /**< \brief (UART_IMR) Mask Framing Error Interrupt */ +#define UART_IMR_PARE (0x1u << 7) /**< \brief (UART_IMR) Mask Parity Error Interrupt */ +#define UART_IMR_TXEMPTY (0x1u << 9) /**< \brief (UART_IMR) Mask TXEMPTY Interrupt */ +#define UART_IMR_TXBUFE (0x1u << 11) /**< \brief (UART_IMR) Mask TXBUFE Interrupt */ +#define UART_IMR_RXBUFF (0x1u << 12) /**< \brief (UART_IMR) Mask RXBUFF Interrupt */ +/* -------- UART_SR : (UART Offset: 0x0014) Status Register -------- */ +#define UART_SR_RXRDY (0x1u << 0) /**< \brief (UART_SR) Receiver Ready */ +#define UART_SR_TXRDY (0x1u << 1) /**< \brief (UART_SR) Transmitter Ready */ +#define UART_SR_ENDRX (0x1u << 3) /**< \brief (UART_SR) End of Receiver Transfer */ +#define UART_SR_ENDTX (0x1u << 4) /**< \brief (UART_SR) End of Transmitter Transfer */ +#define UART_SR_OVRE (0x1u << 5) /**< \brief (UART_SR) Overrun Error */ +#define UART_SR_FRAME (0x1u << 6) /**< \brief (UART_SR) Framing Error */ +#define UART_SR_PARE (0x1u << 7) /**< \brief (UART_SR) Parity Error */ +#define UART_SR_TXEMPTY (0x1u << 9) /**< \brief (UART_SR) Transmitter Empty */ +#define UART_SR_TXBUFE (0x1u << 11) /**< \brief (UART_SR) Transmission Buffer Empty */ +#define UART_SR_RXBUFF (0x1u << 12) /**< \brief (UART_SR) Receive Buffer Full */ +/* -------- UART_RHR : (UART Offset: 0x0018) Receive Holding Register -------- */ +#define UART_RHR_RXCHR_Pos 0 +#define UART_RHR_RXCHR_Msk (0xffu << UART_RHR_RXCHR_Pos) /**< \brief (UART_RHR) Received Character */ +/* -------- UART_THR : (UART Offset: 0x001C) Transmit Holding Register -------- */ +#define UART_THR_TXCHR_Pos 0 +#define UART_THR_TXCHR_Msk (0xffu << UART_THR_TXCHR_Pos) /**< \brief (UART_THR) Character to be Transmitted */ +#define UART_THR_TXCHR(value) ((UART_THR_TXCHR_Msk & ((value) << UART_THR_TXCHR_Pos))) +/* -------- UART_BRGR : (UART Offset: 0x0020) Baud Rate Generator Register -------- */ +#define UART_BRGR_CD_Pos 0 +#define UART_BRGR_CD_Msk (0xffffu << UART_BRGR_CD_Pos) /**< \brief (UART_BRGR) Clock Divisor */ +#define UART_BRGR_CD(value) ((UART_BRGR_CD_Msk & ((value) << UART_BRGR_CD_Pos))) +/* -------- UART_RPR : (UART Offset: 0x100) Receive Pointer Register -------- */ +#define UART_RPR_RXPTR_Pos 0 +#define UART_RPR_RXPTR_Msk (0xffffffffu << UART_RPR_RXPTR_Pos) /**< \brief (UART_RPR) Receive Pointer Register */ +#define UART_RPR_RXPTR(value) ((UART_RPR_RXPTR_Msk & ((value) << UART_RPR_RXPTR_Pos))) +/* -------- UART_RCR : (UART Offset: 0x104) Receive Counter Register -------- */ +#define UART_RCR_RXCTR_Pos 0 +#define UART_RCR_RXCTR_Msk (0xffffu << UART_RCR_RXCTR_Pos) /**< \brief (UART_RCR) Receive Counter Register */ +#define UART_RCR_RXCTR(value) ((UART_RCR_RXCTR_Msk & ((value) << UART_RCR_RXCTR_Pos))) +/* -------- UART_TPR : (UART Offset: 0x108) Transmit Pointer Register -------- */ +#define UART_TPR_TXPTR_Pos 0 +#define UART_TPR_TXPTR_Msk (0xffffffffu << UART_TPR_TXPTR_Pos) /**< \brief (UART_TPR) Transmit Counter Register */ +#define UART_TPR_TXPTR(value) ((UART_TPR_TXPTR_Msk & ((value) << UART_TPR_TXPTR_Pos))) +/* -------- UART_TCR : (UART Offset: 0x10C) Transmit Counter Register -------- */ +#define UART_TCR_TXCTR_Pos 0 +#define UART_TCR_TXCTR_Msk (0xffffu << UART_TCR_TXCTR_Pos) /**< \brief (UART_TCR) Transmit Counter Register */ +#define UART_TCR_TXCTR(value) ((UART_TCR_TXCTR_Msk & ((value) << UART_TCR_TXCTR_Pos))) +/* -------- UART_RNPR : (UART Offset: 0x110) Receive Next Pointer Register -------- */ +#define UART_RNPR_RXNPTR_Pos 0 +#define UART_RNPR_RXNPTR_Msk (0xffffffffu << UART_RNPR_RXNPTR_Pos) /**< \brief (UART_RNPR) Receive Next Pointer */ +#define UART_RNPR_RXNPTR(value) ((UART_RNPR_RXNPTR_Msk & ((value) << UART_RNPR_RXNPTR_Pos))) +/* -------- UART_RNCR : (UART Offset: 0x114) Receive Next Counter Register -------- */ +#define UART_RNCR_RXNCTR_Pos 0 +#define UART_RNCR_RXNCTR_Msk (0xffffu << UART_RNCR_RXNCTR_Pos) /**< \brief (UART_RNCR) Receive Next Counter */ +#define UART_RNCR_RXNCTR(value) ((UART_RNCR_RXNCTR_Msk & ((value) << UART_RNCR_RXNCTR_Pos))) +/* -------- UART_TNPR : (UART Offset: 0x118) Transmit Next Pointer Register -------- */ +#define UART_TNPR_TXNPTR_Pos 0 +#define UART_TNPR_TXNPTR_Msk (0xffffffffu << UART_TNPR_TXNPTR_Pos) /**< \brief (UART_TNPR) Transmit Next Pointer */ +#define UART_TNPR_TXNPTR(value) ((UART_TNPR_TXNPTR_Msk & ((value) << UART_TNPR_TXNPTR_Pos))) +/* -------- UART_TNCR : (UART Offset: 0x11C) Transmit Next Counter Register -------- */ +#define UART_TNCR_TXNCTR_Pos 0 +#define UART_TNCR_TXNCTR_Msk (0xffffu << UART_TNCR_TXNCTR_Pos) /**< \brief (UART_TNCR) Transmit Counter Next */ +#define UART_TNCR_TXNCTR(value) ((UART_TNCR_TXNCTR_Msk & ((value) << UART_TNCR_TXNCTR_Pos))) +/* -------- UART_PTCR : (UART Offset: 0x120) Transfer Control Register -------- */ +#define UART_PTCR_RXTEN (0x1u << 0) /**< \brief (UART_PTCR) Receiver Transfer Enable */ +#define UART_PTCR_RXTDIS (0x1u << 1) /**< \brief (UART_PTCR) Receiver Transfer Disable */ +#define UART_PTCR_TXTEN (0x1u << 8) /**< \brief (UART_PTCR) Transmitter Transfer Enable */ +#define UART_PTCR_TXTDIS (0x1u << 9) /**< \brief (UART_PTCR) Transmitter Transfer Disable */ +/* -------- UART_PTSR : (UART Offset: 0x124) Transfer Status Register -------- */ +#define UART_PTSR_RXTEN (0x1u << 0) /**< \brief (UART_PTSR) Receiver Transfer Enable */ +#define UART_PTSR_TXTEN (0x1u << 8) /**< \brief (UART_PTSR) Transmitter Transfer Enable */ + +/*@}*/ + + +#endif /* _SAM4S_UART_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_udp.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_udp.h new file mode 100644 index 0000000..fe2ec13 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_udp.h
@@ -0,0 +1,195 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_UDP_COMPONENT_ +#define _SAM4S_UDP_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR USB Device Port */ +/* ============================================================================= */ +/** \addtogroup SAM4S_UDP USB Device Port */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Udp hardware registers */ +typedef struct { + RoReg UDP_FRM_NUM; /**< \brief (Udp Offset: 0x000) Frame Number Register */ + RwReg UDP_GLB_STAT; /**< \brief (Udp Offset: 0x004) Global State Register */ + RwReg UDP_FADDR; /**< \brief (Udp Offset: 0x008) Function Address Register */ + RoReg Reserved1[1]; + WoReg UDP_IER; /**< \brief (Udp Offset: 0x010) Interrupt Enable Register */ + WoReg UDP_IDR; /**< \brief (Udp Offset: 0x014) Interrupt Disable Register */ + RoReg UDP_IMR; /**< \brief (Udp Offset: 0x018) Interrupt Mask Register */ + RoReg UDP_ISR; /**< \brief (Udp Offset: 0x01C) Interrupt Status Register */ + WoReg UDP_ICR; /**< \brief (Udp Offset: 0x020) Interrupt Clear Register */ + RoReg Reserved2[1]; + RwReg UDP_RST_EP; /**< \brief (Udp Offset: 0x028) Reset Endpoint Register */ + RoReg Reserved3[1]; + RwReg UDP_CSR[8]; /**< \brief (Udp Offset: 0x030) Endpoint Control and Status Register */ + RwReg UDP_FDR[8]; /**< \brief (Udp Offset: 0x050) Endpoint FIFO Data Register */ + RoReg Reserved4[1]; + RwReg UDP_TXVC; /**< \brief (Udp Offset: 0x074) Transceiver Control Register */ +} Udp; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- UDP_FRM_NUM : (UDP Offset: 0x000) Frame Number Register -------- */ +#define UDP_FRM_NUM_FRM_NUM_Pos 0 +#define UDP_FRM_NUM_FRM_NUM_Msk (0x7ffu << UDP_FRM_NUM_FRM_NUM_Pos) /**< \brief (UDP_FRM_NUM) Frame Number as Defined in the Packet Field Formats */ +#define UDP_FRM_NUM_FRM_ERR (0x1u << 16) /**< \brief (UDP_FRM_NUM) Frame Error */ +#define UDP_FRM_NUM_FRM_OK (0x1u << 17) /**< \brief (UDP_FRM_NUM) Frame OK */ +/* -------- UDP_GLB_STAT : (UDP Offset: 0x004) Global State Register -------- */ +#define UDP_GLB_STAT_FADDEN (0x1u << 0) /**< \brief (UDP_GLB_STAT) Function Address Enable */ +#define UDP_GLB_STAT_CONFG (0x1u << 1) /**< \brief (UDP_GLB_STAT) Configured */ +#define UDP_GLB_STAT_ESR (0x1u << 2) /**< \brief (UDP_GLB_STAT) Enable Send Resume */ +#define UDP_GLB_STAT_RSMINPR (0x1u << 3) /**< \brief (UDP_GLB_STAT) */ +#define UDP_GLB_STAT_RMWUPE (0x1u << 4) /**< \brief (UDP_GLB_STAT) Remote Wake Up Enable */ +/* -------- UDP_FADDR : (UDP Offset: 0x008) Function Address Register -------- */ +#define UDP_FADDR_FADD_Pos 0 +#define UDP_FADDR_FADD_Msk (0x7fu << UDP_FADDR_FADD_Pos) /**< \brief (UDP_FADDR) Function Address Value */ +#define UDP_FADDR_FADD(value) ((UDP_FADDR_FADD_Msk & ((value) << UDP_FADDR_FADD_Pos))) +#define UDP_FADDR_FEN (0x1u << 8) /**< \brief (UDP_FADDR) Function Enable */ +/* -------- UDP_IER : (UDP Offset: 0x010) Interrupt Enable Register -------- */ +#define UDP_IER_EP0INT (0x1u << 0) /**< \brief (UDP_IER) Enable Endpoint 0 Interrupt */ +#define UDP_IER_EP1INT (0x1u << 1) /**< \brief (UDP_IER) Enable Endpoint 1 Interrupt */ +#define UDP_IER_EP2INT (0x1u << 2) /**< \brief (UDP_IER) Enable Endpoint 2Interrupt */ +#define UDP_IER_EP3INT (0x1u << 3) /**< \brief (UDP_IER) Enable Endpoint 3 Interrupt */ +#define UDP_IER_EP4INT (0x1u << 4) /**< \brief (UDP_IER) Enable Endpoint 4 Interrupt */ +#define UDP_IER_EP5INT (0x1u << 5) /**< \brief (UDP_IER) Enable Endpoint 5 Interrupt */ +#define UDP_IER_EP6INT (0x1u << 6) /**< \brief (UDP_IER) Enable Endpoint 6 Interrupt */ +#define UDP_IER_EP7INT (0x1u << 7) /**< \brief (UDP_IER) Enable Endpoint 7 Interrupt */ +#define UDP_IER_RXSUSP (0x1u << 8) /**< \brief (UDP_IER) Enable UDP Suspend Interrupt */ +#define UDP_IER_RXRSM (0x1u << 9) /**< \brief (UDP_IER) Enable UDP Resume Interrupt */ +#define UDP_IER_EXTRSM (0x1u << 10) /**< \brief (UDP_IER) */ +#define UDP_IER_SOFINT (0x1u << 11) /**< \brief (UDP_IER) Enable Start Of Frame Interrupt */ +#define UDP_IER_WAKEUP (0x1u << 13) /**< \brief (UDP_IER) Enable UDP bus Wakeup Interrupt */ +/* -------- UDP_IDR : (UDP Offset: 0x014) Interrupt Disable Register -------- */ +#define UDP_IDR_EP0INT (0x1u << 0) /**< \brief (UDP_IDR) Disable Endpoint 0 Interrupt */ +#define UDP_IDR_EP1INT (0x1u << 1) /**< \brief (UDP_IDR) Disable Endpoint 1 Interrupt */ +#define UDP_IDR_EP2INT (0x1u << 2) /**< \brief (UDP_IDR) Disable Endpoint 2 Interrupt */ +#define UDP_IDR_EP3INT (0x1u << 3) /**< \brief (UDP_IDR) Disable Endpoint 3 Interrupt */ +#define UDP_IDR_EP4INT (0x1u << 4) /**< \brief (UDP_IDR) Disable Endpoint 4 Interrupt */ +#define UDP_IDR_EP5INT (0x1u << 5) /**< \brief (UDP_IDR) Disable Endpoint 5 Interrupt */ +#define UDP_IDR_EP6INT (0x1u << 6) /**< \brief (UDP_IDR) Disable Endpoint 6 Interrupt */ +#define UDP_IDR_EP7INT (0x1u << 7) /**< \brief (UDP_IDR) Disable Endpoint 7 Interrupt */ +#define UDP_IDR_RXSUSP (0x1u << 8) /**< \brief (UDP_IDR) Disable UDP Suspend Interrupt */ +#define UDP_IDR_RXRSM (0x1u << 9) /**< \brief (UDP_IDR) Disable UDP Resume Interrupt */ +#define UDP_IDR_EXTRSM (0x1u << 10) /**< \brief (UDP_IDR) */ +#define UDP_IDR_SOFINT (0x1u << 11) /**< \brief (UDP_IDR) Disable Start Of Frame Interrupt */ +#define UDP_IDR_WAKEUP (0x1u << 13) /**< \brief (UDP_IDR) Disable USB Bus Interrupt */ +/* -------- UDP_IMR : (UDP Offset: 0x018) Interrupt Mask Register -------- */ +#define UDP_IMR_EP0INT (0x1u << 0) /**< \brief (UDP_IMR) Mask Endpoint 0 Interrupt */ +#define UDP_IMR_EP1INT (0x1u << 1) /**< \brief (UDP_IMR) Mask Endpoint 1 Interrupt */ +#define UDP_IMR_EP2INT (0x1u << 2) /**< \brief (UDP_IMR) Mask Endpoint 2 Interrupt */ +#define UDP_IMR_EP3INT (0x1u << 3) /**< \brief (UDP_IMR) Mask Endpoint 3 Interrupt */ +#define UDP_IMR_EP4INT (0x1u << 4) /**< \brief (UDP_IMR) Mask Endpoint 4 Interrupt */ +#define UDP_IMR_EP5INT (0x1u << 5) /**< \brief (UDP_IMR) Mask Endpoint 5 Interrupt */ +#define UDP_IMR_EP6INT (0x1u << 6) /**< \brief (UDP_IMR) Mask Endpoint 6 Interrupt */ +#define UDP_IMR_EP7INT (0x1u << 7) /**< \brief (UDP_IMR) Mask Endpoint 7 Interrupt */ +#define UDP_IMR_RXSUSP (0x1u << 8) /**< \brief (UDP_IMR) Mask UDP Suspend Interrupt */ +#define UDP_IMR_RXRSM (0x1u << 9) /**< \brief (UDP_IMR) Mask UDP Resume Interrupt. */ +#define UDP_IMR_EXTRSM (0x1u << 10) /**< \brief (UDP_IMR) */ +#define UDP_IMR_SOFINT (0x1u << 11) /**< \brief (UDP_IMR) Mask Start Of Frame Interrupt */ +#define UDP_IMR_BIT12 (0x1u << 12) /**< \brief (UDP_IMR) UDP_IMR Bit 12 */ +#define UDP_IMR_WAKEUP (0x1u << 13) /**< \brief (UDP_IMR) USB Bus WAKEUP Interrupt */ +/* -------- UDP_ISR : (UDP Offset: 0x01C) Interrupt Status Register -------- */ +#define UDP_ISR_EP0INT (0x1u << 0) /**< \brief (UDP_ISR) Endpoint 0 Interrupt Status */ +#define UDP_ISR_EP1INT (0x1u << 1) /**< \brief (UDP_ISR) Endpoint 1 Interrupt Status */ +#define UDP_ISR_EP2INT (0x1u << 2) /**< \brief (UDP_ISR) Endpoint 2 Interrupt Status */ +#define UDP_ISR_EP3INT (0x1u << 3) /**< \brief (UDP_ISR) Endpoint 3 Interrupt Status */ +#define UDP_ISR_EP4INT (0x1u << 4) /**< \brief (UDP_ISR) Endpoint 4 Interrupt Status */ +#define UDP_ISR_EP5INT (0x1u << 5) /**< \brief (UDP_ISR) Endpoint 5 Interrupt Status */ +#define UDP_ISR_EP6INT (0x1u << 6) /**< \brief (UDP_ISR) Endpoint 6 Interrupt Status */ +#define UDP_ISR_EP7INT (0x1u << 7) /**< \brief (UDP_ISR) Endpoint 7Interrupt Status */ +#define UDP_ISR_RXSUSP (0x1u << 8) /**< \brief (UDP_ISR) UDP Suspend Interrupt Status */ +#define UDP_ISR_RXRSM (0x1u << 9) /**< \brief (UDP_ISR) UDP Resume Interrupt Status */ +#define UDP_ISR_EXTRSM (0x1u << 10) /**< \brief (UDP_ISR) */ +#define UDP_ISR_SOFINT (0x1u << 11) /**< \brief (UDP_ISR) Start of Frame Interrupt Status */ +#define UDP_ISR_ENDBUSRES (0x1u << 12) /**< \brief (UDP_ISR) End of BUS Reset Interrupt Status */ +#define UDP_ISR_WAKEUP (0x1u << 13) /**< \brief (UDP_ISR) UDP Resume Interrupt Status */ +/* -------- UDP_ICR : (UDP Offset: 0x020) Interrupt Clear Register -------- */ +#define UDP_ICR_RXSUSP (0x1u << 8) /**< \brief (UDP_ICR) Clear UDP Suspend Interrupt */ +#define UDP_ICR_RXRSM (0x1u << 9) /**< \brief (UDP_ICR) Clear UDP Resume Interrupt */ +#define UDP_ICR_EXTRSM (0x1u << 10) /**< \brief (UDP_ICR) */ +#define UDP_ICR_SOFINT (0x1u << 11) /**< \brief (UDP_ICR) Clear Start Of Frame Interrupt */ +#define UDP_ICR_ENDBUSRES (0x1u << 12) /**< \brief (UDP_ICR) Clear End of Bus Reset Interrupt */ +#define UDP_ICR_WAKEUP (0x1u << 13) /**< \brief (UDP_ICR) Clear Wakeup Interrupt */ +/* -------- UDP_RST_EP : (UDP Offset: 0x028) Reset Endpoint Register -------- */ +#define UDP_RST_EP_EP0 (0x1u << 0) /**< \brief (UDP_RST_EP) Reset Endpoint 0 */ +#define UDP_RST_EP_EP1 (0x1u << 1) /**< \brief (UDP_RST_EP) Reset Endpoint 1 */ +#define UDP_RST_EP_EP2 (0x1u << 2) /**< \brief (UDP_RST_EP) Reset Endpoint 2 */ +#define UDP_RST_EP_EP3 (0x1u << 3) /**< \brief (UDP_RST_EP) Reset Endpoint 3 */ +#define UDP_RST_EP_EP4 (0x1u << 4) /**< \brief (UDP_RST_EP) Reset Endpoint 4 */ +#define UDP_RST_EP_EP5 (0x1u << 5) /**< \brief (UDP_RST_EP) Reset Endpoint 5 */ +#define UDP_RST_EP_EP6 (0x1u << 6) /**< \brief (UDP_RST_EP) Reset Endpoint 6 */ +#define UDP_RST_EP_EP7 (0x1u << 7) /**< \brief (UDP_RST_EP) Reset Endpoint 7 */ +/* -------- UDP_CSR[8] : (UDP Offset: 0x030) Endpoint Control and Status Register -------- */ +#define UDP_CSR_TXCOMP (0x1u << 0) /**< \brief (UDP_CSR[8]) Generates an IN Packet with Data Previously Written in the DPR */ +#define UDP_CSR_RX_DATA_BK0 (0x1u << 1) /**< \brief (UDP_CSR[8]) Receive Data Bank 0 */ +#define UDP_CSR_RXSETUP (0x1u << 2) /**< \brief (UDP_CSR[8]) Received Setup */ +#define UDP_CSR_STALLSENT (0x1u << 3) /**< \brief (UDP_CSR[8]) Stall Sent (Control, Bulk Interrupt Endpoints)/ISOERROR (Isochronous Endpoints) */ +#define UDP_CSR_ISOERROR (0x1u << 3) /**< \brief (UDP_CSR[8]) Stall Sent (Control, Bulk Interrupt Endpoints)/ISOERROR (Isochronous Endpoints) */ +#define UDP_CSR_TXPKTRDY (0x1u << 4) /**< \brief (UDP_CSR[8]) Transmit Packet Ready */ +#define UDP_CSR_FORCESTALL (0x1u << 5) /**< \brief (UDP_CSR[8]) Force Stall (used by Control, Bulk and Isochronous Endpoints) */ +#define UDP_CSR_RX_DATA_BK1 (0x1u << 6) /**< \brief (UDP_CSR[8]) Receive Data Bank 1 (only used by endpoints with ping-pong attributes) */ +#define UDP_CSR_DIR (0x1u << 7) /**< \brief (UDP_CSR[8]) Transfer Direction (only available for control endpoints) */ +#define UDP_CSR_EPTYPE_Pos 8 +#define UDP_CSR_EPTYPE_Msk (0x7u << UDP_CSR_EPTYPE_Pos) /**< \brief (UDP_CSR[8]) Endpoint Type */ +#define UDP_CSR_EPTYPE_CTRL (0x0u << 8) /**< \brief (UDP_CSR[8]) Control */ +#define UDP_CSR_EPTYPE_ISO_OUT (0x1u << 8) /**< \brief (UDP_CSR[8]) Isochronous OUT */ +#define UDP_CSR_EPTYPE_BULK_OUT (0x2u << 8) /**< \brief (UDP_CSR[8]) Bulk OUT */ +#define UDP_CSR_EPTYPE_INT_OUT (0x3u << 8) /**< \brief (UDP_CSR[8]) Interrupt OUT */ +#define UDP_CSR_EPTYPE_ISO_IN (0x5u << 8) /**< \brief (UDP_CSR[8]) Isochronous IN */ +#define UDP_CSR_EPTYPE_BULK_IN (0x6u << 8) /**< \brief (UDP_CSR[8]) Bulk IN */ +#define UDP_CSR_EPTYPE_INT_IN (0x7u << 8) /**< \brief (UDP_CSR[8]) Interrupt IN */ +#define UDP_CSR_DTGLE (0x1u << 11) /**< \brief (UDP_CSR[8]) Data Toggle */ +#define UDP_CSR_EPEDS (0x1u << 15) /**< \brief (UDP_CSR[8]) Endpoint Enable Disable */ +#define UDP_CSR_RXBYTECNT_Pos 16 +#define UDP_CSR_RXBYTECNT_Msk (0x7ffu << UDP_CSR_RXBYTECNT_Pos) /**< \brief (UDP_CSR[8]) Number of Bytes Available in the FIFO */ +#define UDP_CSR_RXBYTECNT(value) ((UDP_CSR_RXBYTECNT_Msk & ((value) << UDP_CSR_RXBYTECNT_Pos))) +/* -------- UDP_FDR[8] : (UDP Offset: 0x050) Endpoint FIFO Data Register -------- */ +#define UDP_FDR_FIFO_DATA_Pos 0 +#define UDP_FDR_FIFO_DATA_Msk (0xffu << UDP_FDR_FIFO_DATA_Pos) /**< \brief (UDP_FDR[8]) FIFO Data Value */ +#define UDP_FDR_FIFO_DATA(value) ((UDP_FDR_FIFO_DATA_Msk & ((value) << UDP_FDR_FIFO_DATA_Pos))) +/* -------- UDP_TXVC : (UDP Offset: 0x074) Transceiver Control Register -------- */ +#define UDP_TXVC_TXVDIS (0x1u << 8) /**< \brief (UDP_TXVC) Transceiver Disable */ +#define UDP_TXVC_PUON (0x1u << 9) /**< \brief (UDP_TXVC) Pullup On */ + +/*@}*/ + + +#endif /* _SAM4S_UDP_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_usart.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_usart.h new file mode 100644 index 0000000..62fd7c4 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_usart.h
@@ -0,0 +1,371 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_USART_COMPONENT_ +#define _SAM4S_USART_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Universal Synchronous Asynchronous Receiver Transmitter */ +/* ============================================================================= */ +/** \addtogroup SAM4S_USART Universal Synchronous Asynchronous Receiver Transmitter */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Usart hardware registers */ +typedef struct { + WoReg US_CR; /**< \brief (Usart Offset: 0x0000) Control Register */ + RwReg US_MR; /**< \brief (Usart Offset: 0x0004) Mode Register */ + WoReg US_IER; /**< \brief (Usart Offset: 0x0008) Interrupt Enable Register */ + WoReg US_IDR; /**< \brief (Usart Offset: 0x000C) Interrupt Disable Register */ + RoReg US_IMR; /**< \brief (Usart Offset: 0x0010) Interrupt Mask Register */ + RoReg US_CSR; /**< \brief (Usart Offset: 0x0014) Channel Status Register */ + RoReg US_RHR; /**< \brief (Usart Offset: 0x0018) Receiver Holding Register */ + WoReg US_THR; /**< \brief (Usart Offset: 0x001C) Transmitter Holding Register */ + RwReg US_BRGR; /**< \brief (Usart Offset: 0x0020) Baud Rate Generator Register */ + RwReg US_RTOR; /**< \brief (Usart Offset: 0x0024) Receiver Time-out Register */ + RwReg US_TTGR; /**< \brief (Usart Offset: 0x0028) Transmitter Timeguard Register */ + RoReg Reserved1[5]; + RwReg US_FIDI; /**< \brief (Usart Offset: 0x0040) FI DI Ratio Register */ + RoReg US_NER; /**< \brief (Usart Offset: 0x0044) Number of Errors Register */ + RoReg Reserved2[1]; + RwReg US_IF; /**< \brief (Usart Offset: 0x004C) IrDA Filter Register */ + RwReg US_MAN; /**< \brief (Usart Offset: 0x0050) Manchester Encoder Decoder Register */ + RoReg Reserved3[36]; + RwReg US_WPMR; /**< \brief (Usart Offset: 0xE4) Write Protect Mode Register */ + RoReg US_WPSR; /**< \brief (Usart Offset: 0xE8) Write Protect Status Register */ + RoReg Reserved4[4]; + RoReg US_VERSION; /**< \brief (Usart Offset: 0xFC) Version Register */ + RwReg US_RPR; /**< \brief (Usart Offset: 0x100) Receive Pointer Register */ + RwReg US_RCR; /**< \brief (Usart Offset: 0x104) Receive Counter Register */ + RwReg US_TPR; /**< \brief (Usart Offset: 0x108) Transmit Pointer Register */ + RwReg US_TCR; /**< \brief (Usart Offset: 0x10C) Transmit Counter Register */ + RwReg US_RNPR; /**< \brief (Usart Offset: 0x110) Receive Next Pointer Register */ + RwReg US_RNCR; /**< \brief (Usart Offset: 0x114) Receive Next Counter Register */ + RwReg US_TNPR; /**< \brief (Usart Offset: 0x118) Transmit Next Pointer Register */ + RwReg US_TNCR; /**< \brief (Usart Offset: 0x11C) Transmit Next Counter Register */ + WoReg US_PTCR; /**< \brief (Usart Offset: 0x120) Transfer Control Register */ + RoReg US_PTSR; /**< \brief (Usart Offset: 0x124) Transfer Status Register */ +} Usart; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- US_CR : (USART Offset: 0x0000) Control Register -------- */ +#define US_CR_RSTRX (0x1u << 2) /**< \brief (US_CR) Reset Receiver */ +#define US_CR_RSTTX (0x1u << 3) /**< \brief (US_CR) Reset Transmitter */ +#define US_CR_RXEN (0x1u << 4) /**< \brief (US_CR) Receiver Enable */ +#define US_CR_RXDIS (0x1u << 5) /**< \brief (US_CR) Receiver Disable */ +#define US_CR_TXEN (0x1u << 6) /**< \brief (US_CR) Transmitter Enable */ +#define US_CR_TXDIS (0x1u << 7) /**< \brief (US_CR) Transmitter Disable */ +#define US_CR_RSTSTA (0x1u << 8) /**< \brief (US_CR) Reset Status Bits */ +#define US_CR_STTBRK (0x1u << 9) /**< \brief (US_CR) Start Break */ +#define US_CR_STPBRK (0x1u << 10) /**< \brief (US_CR) Stop Break */ +#define US_CR_STTTO (0x1u << 11) /**< \brief (US_CR) Start Time-out */ +#define US_CR_SENDA (0x1u << 12) /**< \brief (US_CR) Send Address */ +#define US_CR_RSTIT (0x1u << 13) /**< \brief (US_CR) Reset Iterations */ +#define US_CR_RSTNACK (0x1u << 14) /**< \brief (US_CR) Reset Non Acknowledge */ +#define US_CR_RETTO (0x1u << 15) /**< \brief (US_CR) Rearm Time-out */ +#define US_CR_DTREN (0x1u << 16) /**< \brief (US_CR) Data Terminal Ready Enable */ +#define US_CR_DTRDIS (0x1u << 17) /**< \brief (US_CR) Data Terminal Ready Disable */ +#define US_CR_RTSEN (0x1u << 18) /**< \brief (US_CR) Request to Send Enable */ +#define US_CR_FCS (0x1u << 18) /**< \brief (US_CR) Force SPI Chip Select */ +#define US_CR_RTSDIS (0x1u << 19) /**< \brief (US_CR) Request to Send Disable */ +#define US_CR_RCS (0x1u << 19) /**< \brief (US_CR) Release SPI Chip Select */ +/* -------- US_MR : (USART Offset: 0x0004) Mode Register -------- */ +#define US_MR_USART_MODE_Pos 0 +#define US_MR_USART_MODE_Msk (0xfu << US_MR_USART_MODE_Pos) /**< \brief (US_MR) */ +#define US_MR_USART_MODE_NORMAL (0x0u << 0) /**< \brief (US_MR) Normal mode */ +#define US_MR_USART_MODE_RS485 (0x1u << 0) /**< \brief (US_MR) RS485 */ +#define US_MR_USART_MODE_HW_HANDSHAKING (0x2u << 0) /**< \brief (US_MR) Hardware Handshaking */ +#define US_MR_USART_MODE_MODEM (0x3u << 0) /**< \brief (US_MR) Modem */ +#define US_MR_USART_MODE_IS07816_T_0 (0x4u << 0) /**< \brief (US_MR) IS07816 Protocol: T = 0 */ +#define US_MR_USART_MODE_IS07816_T_1 (0x6u << 0) /**< \brief (US_MR) IS07816 Protocol: T = 1 */ +#define US_MR_USART_MODE_IRDA (0x8u << 0) /**< \brief (US_MR) IrDA */ +#define US_MR_USART_MODE_SPI_MASTER (0xEu << 0) /**< \brief (US_MR) SPI Master */ +#define US_MR_USART_MODE_SPI_SLAVE (0xFu << 0) /**< \brief (US_MR) SPI Slave */ +#define US_MR_USCLKS_Pos 4 +#define US_MR_USCLKS_Msk (0x3u << US_MR_USCLKS_Pos) /**< \brief (US_MR) Clock Selection */ +#define US_MR_USCLKS_MCK (0x0u << 4) /**< \brief (US_MR) Master Clock MCK is selected */ +#define US_MR_USCLKS_DIV (0x1u << 4) /**< \brief (US_MR) Internal Clock Divided MCK/DIV (DIV=8) is selected */ +#define US_MR_USCLKS_SCK (0x3u << 4) /**< \brief (US_MR) Serial Clock SLK is selected */ +#define US_MR_CHRL_Pos 6 +#define US_MR_CHRL_Msk (0x3u << US_MR_CHRL_Pos) /**< \brief (US_MR) Character Length. */ +#define US_MR_CHRL_5_BIT (0x0u << 6) /**< \brief (US_MR) Character length is 5 bits */ +#define US_MR_CHRL_6_BIT (0x1u << 6) /**< \brief (US_MR) Character length is 6 bits */ +#define US_MR_CHRL_7_BIT (0x2u << 6) /**< \brief (US_MR) Character length is 7 bits */ +#define US_MR_CHRL_8_BIT (0x3u << 6) /**< \brief (US_MR) Character length is 8 bits */ +#define US_MR_SYNC (0x1u << 8) /**< \brief (US_MR) Synchronous Mode Select */ +#define US_MR_CPHA (0x1u << 8) /**< \brief (US_MR) SPI Clock Phase */ +#define US_MR_PAR_Pos 9 +#define US_MR_PAR_Msk (0x7u << US_MR_PAR_Pos) /**< \brief (US_MR) Parity Type */ +#define US_MR_PAR_EVEN (0x0u << 9) /**< \brief (US_MR) Even parity */ +#define US_MR_PAR_ODD (0x1u << 9) /**< \brief (US_MR) Odd parity */ +#define US_MR_PAR_SPACE (0x2u << 9) /**< \brief (US_MR) Parity forced to 0 (Space) */ +#define US_MR_PAR_MARK (0x3u << 9) /**< \brief (US_MR) Parity forced to 1 (Mark) */ +#define US_MR_PAR_NO (0x4u << 9) /**< \brief (US_MR) No parity */ +#define US_MR_PAR_MULTIDROP (0x6u << 9) /**< \brief (US_MR) Multidrop mode */ +#define US_MR_NBSTOP_Pos 12 +#define US_MR_NBSTOP_Msk (0x3u << US_MR_NBSTOP_Pos) /**< \brief (US_MR) Number of Stop Bits */ +#define US_MR_NBSTOP_1_BIT (0x0u << 12) /**< \brief (US_MR) 1 stop bit */ +#define US_MR_NBSTOP_1_5_BIT (0x1u << 12) /**< \brief (US_MR) 1.5 stop bit (SYNC = 0) or reserved (SYNC = 1) */ +#define US_MR_NBSTOP_2_BIT (0x2u << 12) /**< \brief (US_MR) 2 stop bits */ +#define US_MR_CHMODE_Pos 14 +#define US_MR_CHMODE_Msk (0x3u << US_MR_CHMODE_Pos) /**< \brief (US_MR) Channel Mode */ +#define US_MR_CHMODE_NORMAL (0x0u << 14) /**< \brief (US_MR) Normal Mode */ +#define US_MR_CHMODE_AUTOMATIC (0x1u << 14) /**< \brief (US_MR) Automatic Echo. Receiver input is connected to the TXD pin. */ +#define US_MR_CHMODE_LOCAL_LOOPBACK (0x2u << 14) /**< \brief (US_MR) Local Loopback. Transmitter output is connected to the Receiver Input. */ +#define US_MR_CHMODE_REMOTE_LOOPBACK (0x3u << 14) /**< \brief (US_MR) Remote Loopback. RXD pin is internally connected to the TXD pin. */ +#define US_MR_MSBF (0x1u << 16) /**< \brief (US_MR) Bit Order */ +#define US_MR_CPOL (0x1u << 16) /**< \brief (US_MR) SPI Clock Polarity */ +#define US_MR_MODE9 (0x1u << 17) /**< \brief (US_MR) 9-bit Character Length */ +#define US_MR_CLKO (0x1u << 18) /**< \brief (US_MR) Clock Output Select */ +#define US_MR_OVER (0x1u << 19) /**< \brief (US_MR) Oversampling Mode */ +#define US_MR_INACK (0x1u << 20) /**< \brief (US_MR) Inhibit Non Acknowledge */ +#define US_MR_DSNACK (0x1u << 21) /**< \brief (US_MR) Disable Successive NACK */ +#define US_MR_VAR_SYNC (0x1u << 22) /**< \brief (US_MR) Variable Synchronization of Command/Data Sync Start Frame Delimiter */ +#define US_MR_INVDATA (0x1u << 23) /**< \brief (US_MR) INverted Data */ +#define US_MR_MAX_ITERATION_Pos 24 +#define US_MR_MAX_ITERATION_Msk (0x7u << US_MR_MAX_ITERATION_Pos) /**< \brief (US_MR) */ +#define US_MR_MAX_ITERATION(value) ((US_MR_MAX_ITERATION_Msk & ((value) << US_MR_MAX_ITERATION_Pos))) +#define US_MR_FILTER (0x1u << 28) /**< \brief (US_MR) Infrared Receive Line Filter */ +#define US_MR_MAN (0x1u << 29) /**< \brief (US_MR) Manchester Encoder/Decoder Enable */ +#define US_MR_MODSYNC (0x1u << 30) /**< \brief (US_MR) Manchester Synchronization Mode */ +#define US_MR_ONEBIT (0x1u << 31) /**< \brief (US_MR) Start Frame Delimiter Selector */ +/* -------- US_IER : (USART Offset: 0x0008) Interrupt Enable Register -------- */ +#define US_IER_RXRDY (0x1u << 0) /**< \brief (US_IER) RXRDY Interrupt Enable */ +#define US_IER_TXRDY (0x1u << 1) /**< \brief (US_IER) TXRDY Interrupt Enable */ +#define US_IER_RXBRK (0x1u << 2) /**< \brief (US_IER) Receiver Break Interrupt Enable */ +#define US_IER_ENDRX (0x1u << 3) /**< \brief (US_IER) End of Receive Transfer Interrupt Enable */ +#define US_IER_ENDTX (0x1u << 4) /**< \brief (US_IER) End of Transmit Interrupt Enable */ +#define US_IER_OVRE (0x1u << 5) /**< \brief (US_IER) Overrun Error Interrupt Enable */ +#define US_IER_FRAME (0x1u << 6) /**< \brief (US_IER) Framing Error Interrupt Enable */ +#define US_IER_PARE (0x1u << 7) /**< \brief (US_IER) Parity Error Interrupt Enable */ +#define US_IER_TIMEOUT (0x1u << 8) /**< \brief (US_IER) Time-out Interrupt Enable */ +#define US_IER_TXEMPTY (0x1u << 9) /**< \brief (US_IER) TXEMPTY Interrupt Enable */ +#define US_IER_ITER (0x1u << 10) /**< \brief (US_IER) Max number of Repetitions Reached */ +#define US_IER_UNRE (0x1u << 10) /**< \brief (US_IER) SPI Underrun Error */ +#define US_IER_TXBUFE (0x1u << 11) /**< \brief (US_IER) Buffer Empty Interrupt Enable */ +#define US_IER_RXBUFF (0x1u << 12) /**< \brief (US_IER) Buffer Full Interrupt Enable */ +#define US_IER_NACK (0x1u << 13) /**< \brief (US_IER) Non AcknowledgeInterrupt Enable */ +#define US_IER_RIIC (0x1u << 16) /**< \brief (US_IER) Ring Indicator Input Change Enable */ +#define US_IER_DSRIC (0x1u << 17) /**< \brief (US_IER) Data Set Ready Input Change Enable */ +#define US_IER_DCDIC (0x1u << 18) /**< \brief (US_IER) Data Carrier Detect Input Change Interrupt Enable */ +#define US_IER_CTSIC (0x1u << 19) /**< \brief (US_IER) Clear to Send Input Change Interrupt Enable */ +#define US_IER_MANE (0x1u << 24) /**< \brief (US_IER) Manchester Error Interrupt Enable */ +/* -------- US_IDR : (USART Offset: 0x000C) Interrupt Disable Register -------- */ +#define US_IDR_RXRDY (0x1u << 0) /**< \brief (US_IDR) RXRDY Interrupt Disable */ +#define US_IDR_TXRDY (0x1u << 1) /**< \brief (US_IDR) TXRDY Interrupt Disable */ +#define US_IDR_RXBRK (0x1u << 2) /**< \brief (US_IDR) Receiver Break Interrupt Disable */ +#define US_IDR_ENDRX (0x1u << 3) /**< \brief (US_IDR) End of Receive Transfer Interrupt Disable */ +#define US_IDR_ENDTX (0x1u << 4) /**< \brief (US_IDR) End of Transmit Interrupt Disable */ +#define US_IDR_OVRE (0x1u << 5) /**< \brief (US_IDR) Overrun Error Interrupt Disable */ +#define US_IDR_FRAME (0x1u << 6) /**< \brief (US_IDR) Framing Error Interrupt Disable */ +#define US_IDR_PARE (0x1u << 7) /**< \brief (US_IDR) Parity Error Interrupt Disable */ +#define US_IDR_TIMEOUT (0x1u << 8) /**< \brief (US_IDR) Time-out Interrupt Disable */ +#define US_IDR_TXEMPTY (0x1u << 9) /**< \brief (US_IDR) TXEMPTY Interrupt Disable */ +#define US_IDR_ITER (0x1u << 10) /**< \brief (US_IDR) Max number of Repetitions Reached Disable */ +#define US_IDR_UNRE (0x1u << 10) /**< \brief (US_IDR) SPI Underrun Error Disable */ +#define US_IDR_TXBUFE (0x1u << 11) /**< \brief (US_IDR) Buffer Empty Interrupt Disable */ +#define US_IDR_RXBUFF (0x1u << 12) /**< \brief (US_IDR) Buffer Full Interrupt Disable */ +#define US_IDR_NACK (0x1u << 13) /**< \brief (US_IDR) Non AcknowledgeInterrupt Disable */ +#define US_IDR_RIIC (0x1u << 16) /**< \brief (US_IDR) Ring Indicator Input Change Disable */ +#define US_IDR_DSRIC (0x1u << 17) /**< \brief (US_IDR) Data Set Ready Input Change Disable */ +#define US_IDR_DCDIC (0x1u << 18) /**< \brief (US_IDR) Data Carrier Detect Input Change Interrupt Disable */ +#define US_IDR_CTSIC (0x1u << 19) /**< \brief (US_IDR) Clear to Send Input Change Interrupt Disable */ +#define US_IDR_MANE (0x1u << 24) /**< \brief (US_IDR) Manchester Error Interrupt Disable */ +/* -------- US_IMR : (USART Offset: 0x0010) Interrupt Mask Register -------- */ +#define US_IMR_RXRDY (0x1u << 0) /**< \brief (US_IMR) RXRDY Interrupt Mask */ +#define US_IMR_TXRDY (0x1u << 1) /**< \brief (US_IMR) TXRDY Interrupt Mask */ +#define US_IMR_RXBRK (0x1u << 2) /**< \brief (US_IMR) Receiver Break Interrupt Mask */ +#define US_IMR_ENDRX (0x1u << 3) /**< \brief (US_IMR) End of Receive Transfer Interrupt Mask */ +#define US_IMR_ENDTX (0x1u << 4) /**< \brief (US_IMR) End of Transmit Interrupt Mask */ +#define US_IMR_OVRE (0x1u << 5) /**< \brief (US_IMR) Overrun Error Interrupt Mask */ +#define US_IMR_FRAME (0x1u << 6) /**< \brief (US_IMR) Framing Error Interrupt Mask */ +#define US_IMR_PARE (0x1u << 7) /**< \brief (US_IMR) Parity Error Interrupt Mask */ +#define US_IMR_TIMEOUT (0x1u << 8) /**< \brief (US_IMR) Time-out Interrupt Mask */ +#define US_IMR_TXEMPTY (0x1u << 9) /**< \brief (US_IMR) TXEMPTY Interrupt Mask */ +#define US_IMR_ITER (0x1u << 10) /**< \brief (US_IMR) Max number of Repetitions Reached Mask */ +#define US_IMR_UNRE (0x1u << 10) /**< \brief (US_IMR) SPI Underrun Error Mask */ +#define US_IMR_TXBUFE (0x1u << 11) /**< \brief (US_IMR) Buffer Empty Interrupt Mask */ +#define US_IMR_RXBUFF (0x1u << 12) /**< \brief (US_IMR) Buffer Full Interrupt Mask */ +#define US_IMR_NACK (0x1u << 13) /**< \brief (US_IMR) Non AcknowledgeInterrupt Mask */ +#define US_IMR_RIIC (0x1u << 16) /**< \brief (US_IMR) Ring Indicator Input Change Mask */ +#define US_IMR_DSRIC (0x1u << 17) /**< \brief (US_IMR) Data Set Ready Input Change Mask */ +#define US_IMR_DCDIC (0x1u << 18) /**< \brief (US_IMR) Data Carrier Detect Input Change Interrupt Mask */ +#define US_IMR_CTSIC (0x1u << 19) /**< \brief (US_IMR) Clear to Send Input Change Interrupt Mask */ +#define US_IMR_MANE (0x1u << 24) /**< \brief (US_IMR) Manchester Error Interrupt Mask */ +/* -------- US_CSR : (USART Offset: 0x0014) Channel Status Register -------- */ +#define US_CSR_RXRDY (0x1u << 0) /**< \brief (US_CSR) Receiver Ready */ +#define US_CSR_TXRDY (0x1u << 1) /**< \brief (US_CSR) Transmitter Ready */ +#define US_CSR_RXBRK (0x1u << 2) /**< \brief (US_CSR) Break Received/End of Break */ +#define US_CSR_ENDRX (0x1u << 3) /**< \brief (US_CSR) End of Receiver Transfer */ +#define US_CSR_ENDTX (0x1u << 4) /**< \brief (US_CSR) End of Transmitter Transfer */ +#define US_CSR_OVRE (0x1u << 5) /**< \brief (US_CSR) Overrun Error */ +#define US_CSR_FRAME (0x1u << 6) /**< \brief (US_CSR) Framing Error */ +#define US_CSR_PARE (0x1u << 7) /**< \brief (US_CSR) Parity Error */ +#define US_CSR_TIMEOUT (0x1u << 8) /**< \brief (US_CSR) Receiver Time-out */ +#define US_CSR_TXEMPTY (0x1u << 9) /**< \brief (US_CSR) Transmitter Empty */ +#define US_CSR_ITER (0x1u << 10) /**< \brief (US_CSR) Max number of Repetitions Reached */ +#define US_CSR_UNRE (0x1u << 10) /**< \brief (US_CSR) SPI Underrun Error */ +#define US_CSR_TXBUFE (0x1u << 11) /**< \brief (US_CSR) Transmission Buffer Empty */ +#define US_CSR_RXBUFF (0x1u << 12) /**< \brief (US_CSR) Reception Buffer Full */ +#define US_CSR_NACK (0x1u << 13) /**< \brief (US_CSR) Non AcknowledgeInterrupt */ +#define US_CSR_RIIC (0x1u << 16) /**< \brief (US_CSR) Ring Indicator Input Change Flag */ +#define US_CSR_DSRIC (0x1u << 17) /**< \brief (US_CSR) Data Set Ready Input Change Flag */ +#define US_CSR_DCDIC (0x1u << 18) /**< \brief (US_CSR) Data Carrier Detect Input Change Flag */ +#define US_CSR_CTSIC (0x1u << 19) /**< \brief (US_CSR) Clear to Send Input Change Flag */ +#define US_CSR_RI (0x1u << 20) /**< \brief (US_CSR) Image of RI Input */ +#define US_CSR_DSR (0x1u << 21) /**< \brief (US_CSR) Image of DSR Input */ +#define US_CSR_DCD (0x1u << 22) /**< \brief (US_CSR) Image of DCD Input */ +#define US_CSR_CTS (0x1u << 23) /**< \brief (US_CSR) Image of CTS Input */ +#define US_CSR_MANERR (0x1u << 24) /**< \brief (US_CSR) Manchester Error */ +/* -------- US_RHR : (USART Offset: 0x0018) Receiver Holding Register -------- */ +#define US_RHR_RXCHR_Pos 0 +#define US_RHR_RXCHR_Msk (0x1ffu << US_RHR_RXCHR_Pos) /**< \brief (US_RHR) Received Character */ +#define US_RHR_RXSYNH (0x1u << 15) /**< \brief (US_RHR) Received Sync */ +/* -------- US_THR : (USART Offset: 0x001C) Transmitter Holding Register -------- */ +#define US_THR_TXCHR_Pos 0 +#define US_THR_TXCHR_Msk (0x1ffu << US_THR_TXCHR_Pos) /**< \brief (US_THR) Character to be Transmitted */ +#define US_THR_TXCHR(value) ((US_THR_TXCHR_Msk & ((value) << US_THR_TXCHR_Pos))) +#define US_THR_TXSYNH (0x1u << 15) /**< \brief (US_THR) Sync Field to be transmitted */ +/* -------- US_BRGR : (USART Offset: 0x0020) Baud Rate Generator Register -------- */ +#define US_BRGR_CD_Pos 0 +#define US_BRGR_CD_Msk (0xffffu << US_BRGR_CD_Pos) /**< \brief (US_BRGR) Clock Divider */ +#define US_BRGR_CD(value) ((US_BRGR_CD_Msk & ((value) << US_BRGR_CD_Pos))) +#define US_BRGR_FP_Pos 16 +#define US_BRGR_FP_Msk (0x7u << US_BRGR_FP_Pos) /**< \brief (US_BRGR) Fractional Part */ +#define US_BRGR_FP(value) ((US_BRGR_FP_Msk & ((value) << US_BRGR_FP_Pos))) +/* -------- US_RTOR : (USART Offset: 0x0024) Receiver Time-out Register -------- */ +#define US_RTOR_TO_Pos 0 +#define US_RTOR_TO_Msk (0xffffu << US_RTOR_TO_Pos) /**< \brief (US_RTOR) Time-out Value */ +#define US_RTOR_TO(value) ((US_RTOR_TO_Msk & ((value) << US_RTOR_TO_Pos))) +/* -------- US_TTGR : (USART Offset: 0x0028) Transmitter Timeguard Register -------- */ +#define US_TTGR_TG_Pos 0 +#define US_TTGR_TG_Msk (0xffu << US_TTGR_TG_Pos) /**< \brief (US_TTGR) Timeguard Value */ +#define US_TTGR_TG(value) ((US_TTGR_TG_Msk & ((value) << US_TTGR_TG_Pos))) +/* -------- US_FIDI : (USART Offset: 0x0040) FI DI Ratio Register -------- */ +#define US_FIDI_FI_DI_RATIO_Pos 0 +#define US_FIDI_FI_DI_RATIO_Msk (0x7ffu << US_FIDI_FI_DI_RATIO_Pos) /**< \brief (US_FIDI) FI Over DI Ratio Value */ +#define US_FIDI_FI_DI_RATIO(value) ((US_FIDI_FI_DI_RATIO_Msk & ((value) << US_FIDI_FI_DI_RATIO_Pos))) +/* -------- US_NER : (USART Offset: 0x0044) Number of Errors Register -------- */ +#define US_NER_NB_ERRORS_Pos 0 +#define US_NER_NB_ERRORS_Msk (0xffu << US_NER_NB_ERRORS_Pos) /**< \brief (US_NER) Number of Errors */ +/* -------- US_IF : (USART Offset: 0x004C) IrDA Filter Register -------- */ +#define US_IF_IRDA_FILTER_Pos 0 +#define US_IF_IRDA_FILTER_Msk (0xffu << US_IF_IRDA_FILTER_Pos) /**< \brief (US_IF) IrDA Filter */ +#define US_IF_IRDA_FILTER(value) ((US_IF_IRDA_FILTER_Msk & ((value) << US_IF_IRDA_FILTER_Pos))) +/* -------- US_MAN : (USART Offset: 0x0050) Manchester Encoder Decoder Register -------- */ +#define US_MAN_TX_PL_Pos 0 +#define US_MAN_TX_PL_Msk (0xfu << US_MAN_TX_PL_Pos) /**< \brief (US_MAN) Transmitter Preamble Length */ +#define US_MAN_TX_PL(value) ((US_MAN_TX_PL_Msk & ((value) << US_MAN_TX_PL_Pos))) +#define US_MAN_TX_PP_Pos 8 +#define US_MAN_TX_PP_Msk (0x3u << US_MAN_TX_PP_Pos) /**< \brief (US_MAN) Transmitter Preamble Pattern */ +#define US_MAN_TX_PP_ALL_ONE (0x0u << 8) /**< \brief (US_MAN) The preamble is composed of '1's */ +#define US_MAN_TX_PP_ALL_ZERO (0x1u << 8) /**< \brief (US_MAN) The preamble is composed of '0's */ +#define US_MAN_TX_PP_ZERO_ONE (0x2u << 8) /**< \brief (US_MAN) The preamble is composed of '01's */ +#define US_MAN_TX_PP_ONE_ZERO (0x3u << 8) /**< \brief (US_MAN) The preamble is composed of '10's */ +#define US_MAN_TX_MPOL (0x1u << 12) /**< \brief (US_MAN) Transmitter Manchester Polarity */ +#define US_MAN_RX_PL_Pos 16 +#define US_MAN_RX_PL_Msk (0xfu << US_MAN_RX_PL_Pos) /**< \brief (US_MAN) Receiver Preamble Length */ +#define US_MAN_RX_PL(value) ((US_MAN_RX_PL_Msk & ((value) << US_MAN_RX_PL_Pos))) +#define US_MAN_RX_PP_Pos 24 +#define US_MAN_RX_PP_Msk (0x3u << US_MAN_RX_PP_Pos) /**< \brief (US_MAN) Receiver Preamble Pattern detected */ +#define US_MAN_RX_PP_ALL_ONE (0x0u << 24) /**< \brief (US_MAN) The preamble is composed of '1's */ +#define US_MAN_RX_PP_ALL_ZERO (0x1u << 24) /**< \brief (US_MAN) The preamble is composed of '0's */ +#define US_MAN_RX_PP_ZERO_ONE (0x2u << 24) /**< \brief (US_MAN) The preamble is composed of '01's */ +#define US_MAN_RX_PP_ONE_ZERO (0x3u << 24) /**< \brief (US_MAN) The preamble is composed of '10's */ +#define US_MAN_RX_MPOL (0x1u << 28) /**< \brief (US_MAN) Receiver Manchester Polarity */ +#define US_MAN_STUCKTO1 (0x1u << 29) /**< \brief (US_MAN) */ +#define US_MAN_DRIFT (0x1u << 30) /**< \brief (US_MAN) Drift compensation */ +/* -------- US_WPMR : (USART Offset: 0xE4) Write Protect Mode Register -------- */ +#define US_WPMR_WPEN (0x1u << 0) /**< \brief (US_WPMR) Write Protect Enable */ +#define US_WPMR_WPKEY_Pos 8 +#define US_WPMR_WPKEY_Msk (0xffffffu << US_WPMR_WPKEY_Pos) /**< \brief (US_WPMR) Write Protect KEY */ +#define US_WPMR_WPKEY(value) ((US_WPMR_WPKEY_Msk & ((value) << US_WPMR_WPKEY_Pos))) +/* -------- US_WPSR : (USART Offset: 0xE8) Write Protect Status Register -------- */ +#define US_WPSR_WPVS (0x1u << 0) /**< \brief (US_WPSR) Write Protect Violation Status */ +#define US_WPSR_WPVSRC_Pos 8 +#define US_WPSR_WPVSRC_Msk (0xffffu << US_WPSR_WPVSRC_Pos) /**< \brief (US_WPSR) Write Protect Violation Source */ +/* -------- US_VERSION : (USART Offset: 0xFC) Version Register -------- */ +#define US_VERSION_VERSION_Pos 0 +#define US_VERSION_VERSION_Msk (0xfffu << US_VERSION_VERSION_Pos) /**< \brief (US_VERSION) */ +#define US_VERSION_MFN_Pos 16 +#define US_VERSION_MFN_Msk (0x7u << US_VERSION_MFN_Pos) /**< \brief (US_VERSION) */ +/* -------- US_RPR : (USART Offset: 0x100) Receive Pointer Register -------- */ +#define US_RPR_RXPTR_Pos 0 +#define US_RPR_RXPTR_Msk (0xffffffffu << US_RPR_RXPTR_Pos) /**< \brief (US_RPR) Receive Pointer Register */ +#define US_RPR_RXPTR(value) ((US_RPR_RXPTR_Msk & ((value) << US_RPR_RXPTR_Pos))) +/* -------- US_RCR : (USART Offset: 0x104) Receive Counter Register -------- */ +#define US_RCR_RXCTR_Pos 0 +#define US_RCR_RXCTR_Msk (0xffffu << US_RCR_RXCTR_Pos) /**< \brief (US_RCR) Receive Counter Register */ +#define US_RCR_RXCTR(value) ((US_RCR_RXCTR_Msk & ((value) << US_RCR_RXCTR_Pos))) +/* -------- US_TPR : (USART Offset: 0x108) Transmit Pointer Register -------- */ +#define US_TPR_TXPTR_Pos 0 +#define US_TPR_TXPTR_Msk (0xffffffffu << US_TPR_TXPTR_Pos) /**< \brief (US_TPR) Transmit Counter Register */ +#define US_TPR_TXPTR(value) ((US_TPR_TXPTR_Msk & ((value) << US_TPR_TXPTR_Pos))) +/* -------- US_TCR : (USART Offset: 0x10C) Transmit Counter Register -------- */ +#define US_TCR_TXCTR_Pos 0 +#define US_TCR_TXCTR_Msk (0xffffu << US_TCR_TXCTR_Pos) /**< \brief (US_TCR) Transmit Counter Register */ +#define US_TCR_TXCTR(value) ((US_TCR_TXCTR_Msk & ((value) << US_TCR_TXCTR_Pos))) +/* -------- US_RNPR : (USART Offset: 0x110) Receive Next Pointer Register -------- */ +#define US_RNPR_RXNPTR_Pos 0 +#define US_RNPR_RXNPTR_Msk (0xffffffffu << US_RNPR_RXNPTR_Pos) /**< \brief (US_RNPR) Receive Next Pointer */ +#define US_RNPR_RXNPTR(value) ((US_RNPR_RXNPTR_Msk & ((value) << US_RNPR_RXNPTR_Pos))) +/* -------- US_RNCR : (USART Offset: 0x114) Receive Next Counter Register -------- */ +#define US_RNCR_RXNCTR_Pos 0 +#define US_RNCR_RXNCTR_Msk (0xffffu << US_RNCR_RXNCTR_Pos) /**< \brief (US_RNCR) Receive Next Counter */ +#define US_RNCR_RXNCTR(value) ((US_RNCR_RXNCTR_Msk & ((value) << US_RNCR_RXNCTR_Pos))) +/* -------- US_TNPR : (USART Offset: 0x118) Transmit Next Pointer Register -------- */ +#define US_TNPR_TXNPTR_Pos 0 +#define US_TNPR_TXNPTR_Msk (0xffffffffu << US_TNPR_TXNPTR_Pos) /**< \brief (US_TNPR) Transmit Next Pointer */ +#define US_TNPR_TXNPTR(value) ((US_TNPR_TXNPTR_Msk & ((value) << US_TNPR_TXNPTR_Pos))) +/* -------- US_TNCR : (USART Offset: 0x11C) Transmit Next Counter Register -------- */ +#define US_TNCR_TXNCTR_Pos 0 +#define US_TNCR_TXNCTR_Msk (0xffffu << US_TNCR_TXNCTR_Pos) /**< \brief (US_TNCR) Transmit Counter Next */ +#define US_TNCR_TXNCTR(value) ((US_TNCR_TXNCTR_Msk & ((value) << US_TNCR_TXNCTR_Pos))) +/* -------- US_PTCR : (USART Offset: 0x120) Transfer Control Register -------- */ +#define US_PTCR_RXTEN (0x1u << 0) /**< \brief (US_PTCR) Receiver Transfer Enable */ +#define US_PTCR_RXTDIS (0x1u << 1) /**< \brief (US_PTCR) Receiver Transfer Disable */ +#define US_PTCR_TXTEN (0x1u << 8) /**< \brief (US_PTCR) Transmitter Transfer Enable */ +#define US_PTCR_TXTDIS (0x1u << 9) /**< \brief (US_PTCR) Transmitter Transfer Disable */ +/* -------- US_PTSR : (USART Offset: 0x124) Transfer Status Register -------- */ +#define US_PTSR_RXTEN (0x1u << 0) /**< \brief (US_PTSR) Receiver Transfer Enable */ +#define US_PTSR_TXTEN (0x1u << 8) /**< \brief (US_PTSR) Transmitter Transfer Enable */ + +/*@}*/ + + +#endif /* _SAM4S_USART_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_wdt.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_wdt.h new file mode 100644 index 0000000..e10c886 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/component/component_wdt.h
@@ -0,0 +1,82 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_WDT_COMPONENT_ +#define _SAM4S_WDT_COMPONENT_ + +/* ============================================================================= */ +/** SOFTWARE API DEFINITION FOR Watchdog Timer */ +/* ============================================================================= */ +/** \addtogroup SAM4S_WDT Watchdog Timer */ +/*@{*/ + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +/** \brief Wdt hardware registers */ +typedef struct { + WoReg WDT_CR; /**< \brief (Wdt Offset: 0x00) Control Register */ + RwReg WDT_MR; /**< \brief (Wdt Offset: 0x04) Mode Register */ + RoReg WDT_SR; /**< \brief (Wdt Offset: 0x08) Status Register */ +} Wdt; +#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/* -------- WDT_CR : (WDT Offset: 0x00) Control Register -------- */ +#define WDT_CR_WDRSTT (0x1u << 0) /**< \brief (WDT_CR) Watchdog Restart */ +#define WDT_CR_KEY_Pos 24 +#define WDT_CR_KEY_Msk (0xffu << WDT_CR_KEY_Pos) /**< \brief (WDT_CR) Password */ +#define WDT_CR_KEY(value) ((WDT_CR_KEY_Msk & ((value) << WDT_CR_KEY_Pos))) +/* -------- WDT_MR : (WDT Offset: 0x04) Mode Register -------- */ +#define WDT_MR_WDV_Pos 0 +#define WDT_MR_WDV_Msk (0xfffu << WDT_MR_WDV_Pos) /**< \brief (WDT_MR) Watchdog Counter Value */ +#define WDT_MR_WDV(value) ((WDT_MR_WDV_Msk & ((value) << WDT_MR_WDV_Pos))) +#define WDT_MR_WDFIEN (0x1u << 12) /**< \brief (WDT_MR) Watchdog Fault Interrupt Enable */ +#define WDT_MR_WDRSTEN (0x1u << 13) /**< \brief (WDT_MR) Watchdog Reset Enable */ +#define WDT_MR_WDRPROC (0x1u << 14) /**< \brief (WDT_MR) Watchdog Reset Processor */ +#define WDT_MR_WDDIS (0x1u << 15) /**< \brief (WDT_MR) Watchdog Disable */ +#define WDT_MR_WDD_Pos 16 +#define WDT_MR_WDD_Msk (0xfffu << WDT_MR_WDD_Pos) /**< \brief (WDT_MR) Watchdog Delta Value */ +#define WDT_MR_WDD(value) ((WDT_MR_WDD_Msk & ((value) << WDT_MR_WDD_Pos))) +#define WDT_MR_WDDBGHLT (0x1u << 28) /**< \brief (WDT_MR) Watchdog Debug Halt */ +#define WDT_MR_WDIDLEHLT (0x1u << 29) /**< \brief (WDT_MR) Watchdog Idle Halt */ +/* -------- WDT_SR : (WDT Offset: 0x08) Status Register -------- */ +#define WDT_SR_WDUNF (0x1u << 0) /**< \brief (WDT_SR) Watchdog Underflow */ +#define WDT_SR_WDERR (0x1u << 1) /**< \brief (WDT_SR) Watchdog Error */ + +/*@}*/ + + +#endif /* _SAM4S_WDT_COMPONENT_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_acc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_acc.h new file mode 100644 index 0000000..e6c40a6 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_acc.h
@@ -0,0 +1,66 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_ACC_INSTANCE_ +#define _SAM4S_ACC_INSTANCE_ + +/* ========== Register definition for ACC peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_ACC_CR (0x40040000U) /**< \brief (ACC) Control Register */ +#define REG_ACC_MR (0x40040004U) /**< \brief (ACC) Mode Register */ +#define REG_ACC_IER (0x40040024U) /**< \brief (ACC) Interrupt Enable Register */ +#define REG_ACC_IDR (0x40040028U) /**< \brief (ACC) Interrupt Disable Register */ +#define REG_ACC_IMR (0x4004002CU) /**< \brief (ACC) Interrupt Mask Register */ +#define REG_ACC_ISR (0x40040030U) /**< \brief (ACC) Interrupt Status Register */ +#define REG_ACC_ACR (0x40040094U) /**< \brief (ACC) Analog Control Register */ +#define REG_ACC_WPMR (0x400400E4U) /**< \brief (ACC) Write Protect Mode Register */ +#define REG_ACC_WPSR (0x400400E8U) /**< \brief (ACC) Write Protect Status Register */ +#else +#define REG_ACC_CR (*(WoReg*)0x40040000U) /**< \brief (ACC) Control Register */ +#define REG_ACC_MR (*(RwReg*)0x40040004U) /**< \brief (ACC) Mode Register */ +#define REG_ACC_IER (*(WoReg*)0x40040024U) /**< \brief (ACC) Interrupt Enable Register */ +#define REG_ACC_IDR (*(WoReg*)0x40040028U) /**< \brief (ACC) Interrupt Disable Register */ +#define REG_ACC_IMR (*(RoReg*)0x4004002CU) /**< \brief (ACC) Interrupt Mask Register */ +#define REG_ACC_ISR (*(RoReg*)0x40040030U) /**< \brief (ACC) Interrupt Status Register */ +#define REG_ACC_ACR (*(RwReg*)0x40040094U) /**< \brief (ACC) Analog Control Register */ +#define REG_ACC_WPMR (*(RwReg*)0x400400E4U) /**< \brief (ACC) Write Protect Mode Register */ +#define REG_ACC_WPSR (*(RoReg*)0x400400E8U) /**< \brief (ACC) Write Protect Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_ACC_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_adc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_adc.h new file mode 100644 index 0000000..ec8b4cf --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_adc.h
@@ -0,0 +1,102 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_ADC_INSTANCE_ +#define _SAM4S_ADC_INSTANCE_ + +/* ========== Register definition for ADC peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_ADC_CR (0x40038000U) /**< \brief (ADC) Control Register */ +#define REG_ADC_MR (0x40038004U) /**< \brief (ADC) Mode Register */ +#define REG_ADC_SEQR1 (0x40038008U) /**< \brief (ADC) Channel Sequence Register 1 */ +#define REG_ADC_SEQR2 (0x4003800CU) /**< \brief (ADC) Channel Sequence Register 2 */ +#define REG_ADC_CHER (0x40038010U) /**< \brief (ADC) Channel Enable Register */ +#define REG_ADC_CHDR (0x40038014U) /**< \brief (ADC) Channel Disable Register */ +#define REG_ADC_CHSR (0x40038018U) /**< \brief (ADC) Channel Status Register */ +#define REG_ADC_LCDR (0x40038020U) /**< \brief (ADC) Last Converted Data Register */ +#define REG_ADC_IER (0x40038024U) /**< \brief (ADC) Interrupt Enable Register */ +#define REG_ADC_IDR (0x40038028U) /**< \brief (ADC) Interrupt Disable Register */ +#define REG_ADC_IMR (0x4003802CU) /**< \brief (ADC) Interrupt Mask Register */ +#define REG_ADC_ISR (0x40038030U) /**< \brief (ADC) Interrupt Status Register */ +#define REG_ADC_OVER (0x4003803CU) /**< \brief (ADC) Overrun Status Register */ +#define REG_ADC_EMR (0x40038040U) /**< \brief (ADC) Extended Mode Register */ +#define REG_ADC_CWR (0x40038044U) /**< \brief (ADC) Compare Window Register */ +#define REG_ADC_CGR (0x40038048U) /**< \brief (ADC) Channel Gain Register */ +#define REG_ADC_COR (0x4003804CU) /**< \brief (ADC) Channel Offset Register */ +#define REG_ADC_CDR (0x40038050U) /**< \brief (ADC) Channel Data Register */ +#define REG_ADC_ACR (0x40038094U) /**< \brief (ADC) Analog Control Register */ +#define REG_ADC_WPMR (0x400380E4U) /**< \brief (ADC) Write Protect Mode Register */ +#define REG_ADC_WPSR (0x400380E8U) /**< \brief (ADC) Write Protect Status Register */ +#define REG_ADC_RPR (0x40038100U) /**< \brief (ADC) Receive Pointer Register */ +#define REG_ADC_RCR (0x40038104U) /**< \brief (ADC) Receive Counter Register */ +#define REG_ADC_RNPR (0x40038110U) /**< \brief (ADC) Receive Next Pointer Register */ +#define REG_ADC_RNCR (0x40038114U) /**< \brief (ADC) Receive Next Counter Register */ +#define REG_ADC_PTCR (0x40038120U) /**< \brief (ADC) Transfer Control Register */ +#define REG_ADC_PTSR (0x40038124U) /**< \brief (ADC) Transfer Status Register */ +#else +#define REG_ADC_CR (*(WoReg*)0x40038000U) /**< \brief (ADC) Control Register */ +#define REG_ADC_MR (*(RwReg*)0x40038004U) /**< \brief (ADC) Mode Register */ +#define REG_ADC_SEQR1 (*(RwReg*)0x40038008U) /**< \brief (ADC) Channel Sequence Register 1 */ +#define REG_ADC_SEQR2 (*(RwReg*)0x4003800CU) /**< \brief (ADC) Channel Sequence Register 2 */ +#define REG_ADC_CHER (*(WoReg*)0x40038010U) /**< \brief (ADC) Channel Enable Register */ +#define REG_ADC_CHDR (*(WoReg*)0x40038014U) /**< \brief (ADC) Channel Disable Register */ +#define REG_ADC_CHSR (*(RoReg*)0x40038018U) /**< \brief (ADC) Channel Status Register */ +#define REG_ADC_LCDR (*(RoReg*)0x40038020U) /**< \brief (ADC) Last Converted Data Register */ +#define REG_ADC_IER (*(WoReg*)0x40038024U) /**< \brief (ADC) Interrupt Enable Register */ +#define REG_ADC_IDR (*(WoReg*)0x40038028U) /**< \brief (ADC) Interrupt Disable Register */ +#define REG_ADC_IMR (*(RoReg*)0x4003802CU) /**< \brief (ADC) Interrupt Mask Register */ +#define REG_ADC_ISR (*(RoReg*)0x40038030U) /**< \brief (ADC) Interrupt Status Register */ +#define REG_ADC_OVER (*(RoReg*)0x4003803CU) /**< \brief (ADC) Overrun Status Register */ +#define REG_ADC_EMR (*(RwReg*)0x40038040U) /**< \brief (ADC) Extended Mode Register */ +#define REG_ADC_CWR (*(RwReg*)0x40038044U) /**< \brief (ADC) Compare Window Register */ +#define REG_ADC_CGR (*(RwReg*)0x40038048U) /**< \brief (ADC) Channel Gain Register */ +#define REG_ADC_COR (*(RwReg*)0x4003804CU) /**< \brief (ADC) Channel Offset Register */ +#define REG_ADC_CDR (*(RoReg*)0x40038050U) /**< \brief (ADC) Channel Data Register */ +#define REG_ADC_ACR (*(RwReg*)0x40038094U) /**< \brief (ADC) Analog Control Register */ +#define REG_ADC_WPMR (*(RwReg*)0x400380E4U) /**< \brief (ADC) Write Protect Mode Register */ +#define REG_ADC_WPSR (*(RoReg*)0x400380E8U) /**< \brief (ADC) Write Protect Status Register */ +#define REG_ADC_RPR (*(RwReg*)0x40038100U) /**< \brief (ADC) Receive Pointer Register */ +#define REG_ADC_RCR (*(RwReg*)0x40038104U) /**< \brief (ADC) Receive Counter Register */ +#define REG_ADC_RNPR (*(RwReg*)0x40038110U) /**< \brief (ADC) Receive Next Pointer Register */ +#define REG_ADC_RNCR (*(RwReg*)0x40038114U) /**< \brief (ADC) Receive Next Counter Register */ +#define REG_ADC_PTCR (*(WoReg*)0x40038120U) /**< \brief (ADC) Transfer Control Register */ +#define REG_ADC_PTSR (*(RoReg*)0x40038124U) /**< \brief (ADC) Transfer Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_ADC_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_chipid.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_chipid.h new file mode 100644 index 0000000..3c476ab --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_chipid.h
@@ -0,0 +1,52 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_CHIPID_INSTANCE_ +#define _SAM4S_CHIPID_INSTANCE_ + +/* ========== Register definition for CHIPID peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_CHIPID_CIDR (0x400E0740U) /**< \brief (CHIPID) Chip ID Register */ +#define REG_CHIPID_EXID (0x400E0744U) /**< \brief (CHIPID) Chip ID Extension Register */ +#else +#define REG_CHIPID_CIDR (*(RoReg*)0x400E0740U) /**< \brief (CHIPID) Chip ID Register */ +#define REG_CHIPID_EXID (*(RoReg*)0x400E0744U) /**< \brief (CHIPID) Chip ID Extension Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_CHIPID_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_crccu.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_crccu.h new file mode 100644 index 0000000..8e3e3b4 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_crccu.h
@@ -0,0 +1,78 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_CRCCU_INSTANCE_ +#define _SAM4S_CRCCU_INSTANCE_ + +/* ========== Register definition for CRCCU peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_CRCCU_DSCR (0x40044000U) /**< \brief (CRCCU) CRCCU Descriptor Base Register */ +#define REG_CRCCU_DMA_EN (0x40044008U) /**< \brief (CRCCU) CRCCU DMA Enable Register */ +#define REG_CRCCU_DMA_DIS (0x4004400CU) /**< \brief (CRCCU) CRCCU DMA Disable Register */ +#define REG_CRCCU_DMA_SR (0x40044010U) /**< \brief (CRCCU) CRCCU DMA Status Register */ +#define REG_CRCCU_DMA_IER (0x40044014U) /**< \brief (CRCCU) CRCCU DMA Interrupt Enable Register */ +#define REG_CRCCU_DMA_IDR (0x40044018U) /**< \brief (CRCCU) CRCCU DMA Interrupt Disable Register */ +#define REG_CRCCU_DMA_IMR (0x4004401CU) /**< \brief (CRCCU) CRCCU DMA Interrupt Mask Register */ +#define REG_CRCCU_DMA_ISR (0x40044020U) /**< \brief (CRCCU) CRCCU DMA Interrupt Status Register */ +#define REG_CRCCU_CR (0x40044034U) /**< \brief (CRCCU) CRCCU Control Register */ +#define REG_CRCCU_MR (0x40044038U) /**< \brief (CRCCU) CRCCU Mode Register */ +#define REG_CRCCU_SR (0x4004403CU) /**< \brief (CRCCU) CRCCU Status Register */ +#define REG_CRCCU_IER (0x40044040U) /**< \brief (CRCCU) CRCCU Interrupt Enable Register */ +#define REG_CRCCU_IDR (0x40044044U) /**< \brief (CRCCU) CRCCU Interrupt Disable Register */ +#define REG_CRCCU_IMR (0x40044048U) /**< \brief (CRCCU) CRCCU Interrupt Mask Register */ +#define REG_CRCCU_ISR (0x4004404CU) /**< \brief (CRCCU) CRCCU Interrupt Status Register */ +#else +#define REG_CRCCU_DSCR (*(RwReg*)0x40044000U) /**< \brief (CRCCU) CRCCU Descriptor Base Register */ +#define REG_CRCCU_DMA_EN (*(WoReg*)0x40044008U) /**< \brief (CRCCU) CRCCU DMA Enable Register */ +#define REG_CRCCU_DMA_DIS (*(WoReg*)0x4004400CU) /**< \brief (CRCCU) CRCCU DMA Disable Register */ +#define REG_CRCCU_DMA_SR (*(RoReg*)0x40044010U) /**< \brief (CRCCU) CRCCU DMA Status Register */ +#define REG_CRCCU_DMA_IER (*(WoReg*)0x40044014U) /**< \brief (CRCCU) CRCCU DMA Interrupt Enable Register */ +#define REG_CRCCU_DMA_IDR (*(WoReg*)0x40044018U) /**< \brief (CRCCU) CRCCU DMA Interrupt Disable Register */ +#define REG_CRCCU_DMA_IMR (*(RoReg*)0x4004401CU) /**< \brief (CRCCU) CRCCU DMA Interrupt Mask Register */ +#define REG_CRCCU_DMA_ISR (*(RoReg*)0x40044020U) /**< \brief (CRCCU) CRCCU DMA Interrupt Status Register */ +#define REG_CRCCU_CR (*(WoReg*)0x40044034U) /**< \brief (CRCCU) CRCCU Control Register */ +#define REG_CRCCU_MR (*(RwReg*)0x40044038U) /**< \brief (CRCCU) CRCCU Mode Register */ +#define REG_CRCCU_SR (*(RoReg*)0x4004403CU) /**< \brief (CRCCU) CRCCU Status Register */ +#define REG_CRCCU_IER (*(WoReg*)0x40044040U) /**< \brief (CRCCU) CRCCU Interrupt Enable Register */ +#define REG_CRCCU_IDR (*(WoReg*)0x40044044U) /**< \brief (CRCCU) CRCCU Interrupt Disable Register */ +#define REG_CRCCU_IMR (*(RoReg*)0x40044048U) /**< \brief (CRCCU) CRCCU Interrupt Mask Register */ +#define REG_CRCCU_ISR (*(RoReg*)0x4004404CU) /**< \brief (CRCCU) CRCCU Interrupt Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_CRCCU_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_dacc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_dacc.h new file mode 100644 index 0000000..26f7862 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_dacc.h
@@ -0,0 +1,86 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_DACC_INSTANCE_ +#define _SAM4S_DACC_INSTANCE_ + +/* ========== Register definition for DACC peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_DACC_CR (0x4003C000U) /**< \brief (DACC) Control Register */ +#define REG_DACC_MR (0x4003C004U) /**< \brief (DACC) Mode Register */ +#define REG_DACC_CHER (0x4003C010U) /**< \brief (DACC) Channel Enable Register */ +#define REG_DACC_CHDR (0x4003C014U) /**< \brief (DACC) Channel Disable Register */ +#define REG_DACC_CHSR (0x4003C018U) /**< \brief (DACC) Channel Status Register */ +#define REG_DACC_CDR (0x4003C020U) /**< \brief (DACC) Conversion Data Register */ +#define REG_DACC_IER (0x4003C024U) /**< \brief (DACC) Interrupt Enable Register */ +#define REG_DACC_IDR (0x4003C028U) /**< \brief (DACC) Interrupt Disable Register */ +#define REG_DACC_IMR (0x4003C02CU) /**< \brief (DACC) Interrupt Mask Register */ +#define REG_DACC_ISR (0x4003C030U) /**< \brief (DACC) Interrupt Status Register */ +#define REG_DACC_ACR (0x4003C094U) /**< \brief (DACC) Analog Current Register */ +#define REG_DACC_WPMR (0x4003C0E4U) /**< \brief (DACC) Write Protect Mode register */ +#define REG_DACC_WPSR (0x4003C0E8U) /**< \brief (DACC) Write Protect Status register */ +#define REG_DACC_TPR (0x4003C108U) /**< \brief (DACC) Transmit Pointer Register */ +#define REG_DACC_TCR (0x4003C10CU) /**< \brief (DACC) Transmit Counter Register */ +#define REG_DACC_TNPR (0x4003C118U) /**< \brief (DACC) Transmit Next Pointer Register */ +#define REG_DACC_TNCR (0x4003C11CU) /**< \brief (DACC) Transmit Next Counter Register */ +#define REG_DACC_PTCR (0x4003C120U) /**< \brief (DACC) Transfer Control Register */ +#define REG_DACC_PTSR (0x4003C124U) /**< \brief (DACC) Transfer Status Register */ +#else +#define REG_DACC_CR (*(WoReg*)0x4003C000U) /**< \brief (DACC) Control Register */ +#define REG_DACC_MR (*(RwReg*)0x4003C004U) /**< \brief (DACC) Mode Register */ +#define REG_DACC_CHER (*(WoReg*)0x4003C010U) /**< \brief (DACC) Channel Enable Register */ +#define REG_DACC_CHDR (*(WoReg*)0x4003C014U) /**< \brief (DACC) Channel Disable Register */ +#define REG_DACC_CHSR (*(RoReg*)0x4003C018U) /**< \brief (DACC) Channel Status Register */ +#define REG_DACC_CDR (*(WoReg*)0x4003C020U) /**< \brief (DACC) Conversion Data Register */ +#define REG_DACC_IER (*(WoReg*)0x4003C024U) /**< \brief (DACC) Interrupt Enable Register */ +#define REG_DACC_IDR (*(WoReg*)0x4003C028U) /**< \brief (DACC) Interrupt Disable Register */ +#define REG_DACC_IMR (*(RoReg*)0x4003C02CU) /**< \brief (DACC) Interrupt Mask Register */ +#define REG_DACC_ISR (*(RoReg*)0x4003C030U) /**< \brief (DACC) Interrupt Status Register */ +#define REG_DACC_ACR (*(RwReg*)0x4003C094U) /**< \brief (DACC) Analog Current Register */ +#define REG_DACC_WPMR (*(RwReg*)0x4003C0E4U) /**< \brief (DACC) Write Protect Mode register */ +#define REG_DACC_WPSR (*(RoReg*)0x4003C0E8U) /**< \brief (DACC) Write Protect Status register */ +#define REG_DACC_TPR (*(RwReg*)0x4003C108U) /**< \brief (DACC) Transmit Pointer Register */ +#define REG_DACC_TCR (*(RwReg*)0x4003C10CU) /**< \brief (DACC) Transmit Counter Register */ +#define REG_DACC_TNPR (*(RwReg*)0x4003C118U) /**< \brief (DACC) Transmit Next Pointer Register */ +#define REG_DACC_TNCR (*(RwReg*)0x4003C11CU) /**< \brief (DACC) Transmit Next Counter Register */ +#define REG_DACC_PTCR (*(WoReg*)0x4003C120U) /**< \brief (DACC) Transfer Control Register */ +#define REG_DACC_PTSR (*(RoReg*)0x4003C124U) /**< \brief (DACC) Transfer Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_DACC_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_efc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_efc.h new file mode 100644 index 0000000..cbef00e --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_efc.h
@@ -0,0 +1,56 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_EFC_INSTANCE_ +#define _SAM4S_EFC_INSTANCE_ + +/* ========== Register definition for EFC peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_EFC_FMR (0x400E0A00U) /**< \brief (EFC) EEFC Flash Mode Register */ +#define REG_EFC_FCR (0x400E0A04U) /**< \brief (EFC) EEFC Flash Command Register */ +#define REG_EFC_FSR (0x400E0A08U) /**< \brief (EFC) EEFC Flash Status Register */ +#define REG_EFC_FRR (0x400E0A0CU) /**< \brief (EFC) EEFC Flash Result Register */ +#else +#define REG_EFC_FMR (*(RwReg*)0x400E0A00U) /**< \brief (EFC) EEFC Flash Mode Register */ +#define REG_EFC_FCR (*(WoReg*)0x400E0A04U) /**< \brief (EFC) EEFC Flash Command Register */ +#define REG_EFC_FSR (*(RoReg*)0x400E0A08U) /**< \brief (EFC) EEFC Flash Status Register */ +#define REG_EFC_FRR (*(RoReg*)0x400E0A0CU) /**< \brief (EFC) EEFC Flash Result Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_EFC_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_gpbr.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_gpbr.h new file mode 100644 index 0000000..1e2dd8a --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_gpbr.h
@@ -0,0 +1,50 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_GPBR_INSTANCE_ +#define _SAM4S_GPBR_INSTANCE_ + +/* ========== Register definition for GPBR peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_GPBR_GPBR (0x400E1490U) /**< \brief (GPBR) General Purpose Backup Register */ +#else +#define REG_GPBR_GPBR (*(RwReg*)0x400E1490U) /**< \brief (GPBR) General Purpose Backup Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_GPBR_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_hsmci.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_hsmci.h new file mode 100644 index 0000000..f36a43c --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_hsmci.h
@@ -0,0 +1,106 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_HSMCI_INSTANCE_ +#define _SAM4S_HSMCI_INSTANCE_ + +/* ========== Register definition for HSMCI peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_HSMCI_CR (0x40000000U) /**< \brief (HSMCI) Control Register */ +#define REG_HSMCI_MR (0x40000004U) /**< \brief (HSMCI) Mode Register */ +#define REG_HSMCI_DTOR (0x40000008U) /**< \brief (HSMCI) Data Timeout Register */ +#define REG_HSMCI_SDCR (0x4000000CU) /**< \brief (HSMCI) SD/SDIO Card Register */ +#define REG_HSMCI_ARGR (0x40000010U) /**< \brief (HSMCI) Argument Register */ +#define REG_HSMCI_CMDR (0x40000014U) /**< \brief (HSMCI) Command Register */ +#define REG_HSMCI_BLKR (0x40000018U) /**< \brief (HSMCI) Block Register */ +#define REG_HSMCI_CSTOR (0x4000001CU) /**< \brief (HSMCI) Completion Signal Timeout Register */ +#define REG_HSMCI_RSPR (0x40000020U) /**< \brief (HSMCI) Response Register */ +#define REG_HSMCI_RDR (0x40000030U) /**< \brief (HSMCI) Receive Data Register */ +#define REG_HSMCI_TDR (0x40000034U) /**< \brief (HSMCI) Transmit Data Register */ +#define REG_HSMCI_SR (0x40000040U) /**< \brief (HSMCI) Status Register */ +#define REG_HSMCI_IER (0x40000044U) /**< \brief (HSMCI) Interrupt Enable Register */ +#define REG_HSMCI_IDR (0x40000048U) /**< \brief (HSMCI) Interrupt Disable Register */ +#define REG_HSMCI_IMR (0x4000004CU) /**< \brief (HSMCI) Interrupt Mask Register */ +#define REG_HSMCI_CFG (0x40000054U) /**< \brief (HSMCI) Configuration Register */ +#define REG_HSMCI_WPMR (0x400000E4U) /**< \brief (HSMCI) Write Protection Mode Register */ +#define REG_HSMCI_WPSR (0x400000E8U) /**< \brief (HSMCI) Write Protection Status Register */ +#define REG_HSMCI_RPR (0x40000100U) /**< \brief (HSMCI) Receive Pointer Register */ +#define REG_HSMCI_RCR (0x40000104U) /**< \brief (HSMCI) Receive Counter Register */ +#define REG_HSMCI_TPR (0x40000108U) /**< \brief (HSMCI) Transmit Pointer Register */ +#define REG_HSMCI_TCR (0x4000010CU) /**< \brief (HSMCI) Transmit Counter Register */ +#define REG_HSMCI_RNPR (0x40000110U) /**< \brief (HSMCI) Receive Next Pointer Register */ +#define REG_HSMCI_RNCR (0x40000114U) /**< \brief (HSMCI) Receive Next Counter Register */ +#define REG_HSMCI_TNPR (0x40000118U) /**< \brief (HSMCI) Transmit Next Pointer Register */ +#define REG_HSMCI_TNCR (0x4000011CU) /**< \brief (HSMCI) Transmit Next Counter Register */ +#define REG_HSMCI_PTCR (0x40000120U) /**< \brief (HSMCI) Transfer Control Register */ +#define REG_HSMCI_PTSR (0x40000124U) /**< \brief (HSMCI) Transfer Status Register */ +#define REG_HSMCI_FIFO (0x40000200U) /**< \brief (HSMCI) FIFO Memory Aperture0 */ +#else +#define REG_HSMCI_CR (*(WoReg*)0x40000000U) /**< \brief (HSMCI) Control Register */ +#define REG_HSMCI_MR (*(RwReg*)0x40000004U) /**< \brief (HSMCI) Mode Register */ +#define REG_HSMCI_DTOR (*(RwReg*)0x40000008U) /**< \brief (HSMCI) Data Timeout Register */ +#define REG_HSMCI_SDCR (*(RwReg*)0x4000000CU) /**< \brief (HSMCI) SD/SDIO Card Register */ +#define REG_HSMCI_ARGR (*(RwReg*)0x40000010U) /**< \brief (HSMCI) Argument Register */ +#define REG_HSMCI_CMDR (*(WoReg*)0x40000014U) /**< \brief (HSMCI) Command Register */ +#define REG_HSMCI_BLKR (*(RwReg*)0x40000018U) /**< \brief (HSMCI) Block Register */ +#define REG_HSMCI_CSTOR (*(RwReg*)0x4000001CU) /**< \brief (HSMCI) Completion Signal Timeout Register */ +#define REG_HSMCI_RSPR (*(RoReg*)0x40000020U) /**< \brief (HSMCI) Response Register */ +#define REG_HSMCI_RDR (*(RoReg*)0x40000030U) /**< \brief (HSMCI) Receive Data Register */ +#define REG_HSMCI_TDR (*(WoReg*)0x40000034U) /**< \brief (HSMCI) Transmit Data Register */ +#define REG_HSMCI_SR (*(RoReg*)0x40000040U) /**< \brief (HSMCI) Status Register */ +#define REG_HSMCI_IER (*(WoReg*)0x40000044U) /**< \brief (HSMCI) Interrupt Enable Register */ +#define REG_HSMCI_IDR (*(WoReg*)0x40000048U) /**< \brief (HSMCI) Interrupt Disable Register */ +#define REG_HSMCI_IMR (*(RoReg*)0x4000004CU) /**< \brief (HSMCI) Interrupt Mask Register */ +#define REG_HSMCI_CFG (*(RwReg*)0x40000054U) /**< \brief (HSMCI) Configuration Register */ +#define REG_HSMCI_WPMR (*(RwReg*)0x400000E4U) /**< \brief (HSMCI) Write Protection Mode Register */ +#define REG_HSMCI_WPSR (*(RoReg*)0x400000E8U) /**< \brief (HSMCI) Write Protection Status Register */ +#define REG_HSMCI_RPR (*(RwReg*)0x40000100U) /**< \brief (HSMCI) Receive Pointer Register */ +#define REG_HSMCI_RCR (*(RwReg*)0x40000104U) /**< \brief (HSMCI) Receive Counter Register */ +#define REG_HSMCI_TPR (*(RwReg*)0x40000108U) /**< \brief (HSMCI) Transmit Pointer Register */ +#define REG_HSMCI_TCR (*(RwReg*)0x4000010CU) /**< \brief (HSMCI) Transmit Counter Register */ +#define REG_HSMCI_RNPR (*(RwReg*)0x40000110U) /**< \brief (HSMCI) Receive Next Pointer Register */ +#define REG_HSMCI_RNCR (*(RwReg*)0x40000114U) /**< \brief (HSMCI) Receive Next Counter Register */ +#define REG_HSMCI_TNPR (*(RwReg*)0x40000118U) /**< \brief (HSMCI) Transmit Next Pointer Register */ +#define REG_HSMCI_TNCR (*(RwReg*)0x4000011CU) /**< \brief (HSMCI) Transmit Next Counter Register */ +#define REG_HSMCI_PTCR (*(WoReg*)0x40000120U) /**< \brief (HSMCI) Transfer Control Register */ +#define REG_HSMCI_PTSR (*(RoReg*)0x40000124U) /**< \brief (HSMCI) Transfer Status Register */ +#define REG_HSMCI_FIFO (*(RwReg*)0x40000200U) /**< \brief (HSMCI) FIFO Memory Aperture0 */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_HSMCI_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_matrix.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_matrix.h new file mode 100644 index 0000000..a08173f --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_matrix.h
@@ -0,0 +1,70 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_MATRIX_INSTANCE_ +#define _SAM4S_MATRIX_INSTANCE_ + +/* ========== Register definition for MATRIX peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_MATRIX_MCFG (0x400E0200U) /**< \brief (MATRIX) Master Configuration Register */ +#define REG_MATRIX_SCFG (0x400E0240U) /**< \brief (MATRIX) Slave Configuration Register */ +#define REG_MATRIX_PRAS0 (0x400E0280U) /**< \brief (MATRIX) Priority Register A for Slave 0 */ +#define REG_MATRIX_PRAS1 (0x400E0288U) /**< \brief (MATRIX) Priority Register A for Slave 1 */ +#define REG_MATRIX_PRAS2 (0x400E0290U) /**< \brief (MATRIX) Priority Register A for Slave 2 */ +#define REG_MATRIX_PRAS3 (0x400E0298U) /**< \brief (MATRIX) Priority Register A for Slave 3 */ +#define REG_MATRIX_PRAS4 (0x400E02A0U) /**< \brief (MATRIX) Priority Register A for Slave 4 */ +#define REG_CCFG_SYSIO (0x400E0314U) /**< \brief (MATRIX) System I/O Configuration register */ +#define REG_CCFG_SMCNFCS (0x400E031CU) /**< \brief (MATRIX) SMC Chip Select NAND Flash Assignment Register */ +#define REG_MATRIX_WPMR (0x400E03E4U) /**< \brief (MATRIX) Write Protect Mode Register */ +#define REG_MATRIX_WPSR (0x400E03E8U) /**< \brief (MATRIX) Write Protect Status Register */ +#else +#define REG_MATRIX_MCFG (*(RwReg*)0x400E0200U) /**< \brief (MATRIX) Master Configuration Register */ +#define REG_MATRIX_SCFG (*(RwReg*)0x400E0240U) /**< \brief (MATRIX) Slave Configuration Register */ +#define REG_MATRIX_PRAS0 (*(RwReg*)0x400E0280U) /**< \brief (MATRIX) Priority Register A for Slave 0 */ +#define REG_MATRIX_PRAS1 (*(RwReg*)0x400E0288U) /**< \brief (MATRIX) Priority Register A for Slave 1 */ +#define REG_MATRIX_PRAS2 (*(RwReg*)0x400E0290U) /**< \brief (MATRIX) Priority Register A for Slave 2 */ +#define REG_MATRIX_PRAS3 (*(RwReg*)0x400E0298U) /**< \brief (MATRIX) Priority Register A for Slave 3 */ +#define REG_MATRIX_PRAS4 (*(RwReg*)0x400E02A0U) /**< \brief (MATRIX) Priority Register A for Slave 4 */ +#define REG_CCFG_SYSIO (*(RwReg*)0x400E0314U) /**< \brief (MATRIX) System I/O Configuration register */ +#define REG_CCFG_SMCNFCS (*(RwReg*)0x400E031CU) /**< \brief (MATRIX) SMC Chip Select NAND Flash Assignment Register */ +#define REG_MATRIX_WPMR (*(RwReg*)0x400E03E4U) /**< \brief (MATRIX) Write Protect Mode Register */ +#define REG_MATRIX_WPSR (*(RoReg*)0x400E03E8U) /**< \brief (MATRIX) Write Protect Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_MATRIX_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_pioa.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_pioa.h new file mode 100644 index 0000000..7234870 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_pioa.h
@@ -0,0 +1,166 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_PIOA_INSTANCE_ +#define _SAM4S_PIOA_INSTANCE_ + +/* ========== Register definition for PIOA peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_PIOA_PER (0x400E0E00U) /**< \brief (PIOA) PIO Enable Register */ +#define REG_PIOA_PDR (0x400E0E04U) /**< \brief (PIOA) PIO Disable Register */ +#define REG_PIOA_PSR (0x400E0E08U) /**< \brief (PIOA) PIO Status Register */ +#define REG_PIOA_OER (0x400E0E10U) /**< \brief (PIOA) Output Enable Register */ +#define REG_PIOA_ODR (0x400E0E14U) /**< \brief (PIOA) Output Disable Register */ +#define REG_PIOA_OSR (0x400E0E18U) /**< \brief (PIOA) Output Status Register */ +#define REG_PIOA_IFER (0x400E0E20U) /**< \brief (PIOA) Glitch Input Filter Enable Register */ +#define REG_PIOA_IFDR (0x400E0E24U) /**< \brief (PIOA) Glitch Input Filter Disable Register */ +#define REG_PIOA_IFSR (0x400E0E28U) /**< \brief (PIOA) Glitch Input Filter Status Register */ +#define REG_PIOA_SODR (0x400E0E30U) /**< \brief (PIOA) Set Output Data Register */ +#define REG_PIOA_CODR (0x400E0E34U) /**< \brief (PIOA) Clear Output Data Register */ +#define REG_PIOA_ODSR (0x400E0E38U) /**< \brief (PIOA) Output Data Status Register */ +#define REG_PIOA_PDSR (0x400E0E3CU) /**< \brief (PIOA) Pin Data Status Register */ +#define REG_PIOA_IER (0x400E0E40U) /**< \brief (PIOA) Interrupt Enable Register */ +#define REG_PIOA_IDR (0x400E0E44U) /**< \brief (PIOA) Interrupt Disable Register */ +#define REG_PIOA_IMR (0x400E0E48U) /**< \brief (PIOA) Interrupt Mask Register */ +#define REG_PIOA_ISR (0x400E0E4CU) /**< \brief (PIOA) Interrupt Status Register */ +#define REG_PIOA_MDER (0x400E0E50U) /**< \brief (PIOA) Multi-driver Enable Register */ +#define REG_PIOA_MDDR (0x400E0E54U) /**< \brief (PIOA) Multi-driver Disable Register */ +#define REG_PIOA_MDSR (0x400E0E58U) /**< \brief (PIOA) Multi-driver Status Register */ +#define REG_PIOA_PUDR (0x400E0E60U) /**< \brief (PIOA) Pull-up Disable Register */ +#define REG_PIOA_PUER (0x400E0E64U) /**< \brief (PIOA) Pull-up Enable Register */ +#define REG_PIOA_PUSR (0x400E0E68U) /**< \brief (PIOA) Pad Pull-up Status Register */ +#define REG_PIOA_ABCDSR (0x400E0E70U) /**< \brief (PIOA) Peripheral Select Register */ +#define REG_PIOA_IFSCDR (0x400E0E80U) /**< \brief (PIOA) Input Filter Slow Clock Disable Register */ +#define REG_PIOA_IFSCER (0x400E0E84U) /**< \brief (PIOA) Input Filter Slow Clock Enable Register */ +#define REG_PIOA_IFSCSR (0x400E0E88U) /**< \brief (PIOA) Input Filter Slow Clock Status Register */ +#define REG_PIOA_SCDR (0x400E0E8CU) /**< \brief (PIOA) Slow Clock Divider Debouncing Register */ +#define REG_PIOA_PPDDR (0x400E0E90U) /**< \brief (PIOA) Pad Pull-down Disable Register */ +#define REG_PIOA_PPDER (0x400E0E94U) /**< \brief (PIOA) Pad Pull-down Enable Register */ +#define REG_PIOA_PPDSR (0x400E0E98U) /**< \brief (PIOA) Pad Pull-down Status Register */ +#define REG_PIOA_OWER (0x400E0EA0U) /**< \brief (PIOA) Output Write Enable */ +#define REG_PIOA_OWDR (0x400E0EA4U) /**< \brief (PIOA) Output Write Disable */ +#define REG_PIOA_OWSR (0x400E0EA8U) /**< \brief (PIOA) Output Write Status Register */ +#define REG_PIOA_AIMER (0x400E0EB0U) /**< \brief (PIOA) Additional Interrupt Modes Enable Register */ +#define REG_PIOA_AIMDR (0x400E0EB4U) /**< \brief (PIOA) Additional Interrupt Modes Disables Register */ +#define REG_PIOA_AIMMR (0x400E0EB8U) /**< \brief (PIOA) Additional Interrupt Modes Mask Register */ +#define REG_PIOA_ESR (0x400E0EC0U) /**< \brief (PIOA) Edge Select Register */ +#define REG_PIOA_LSR (0x400E0EC4U) /**< \brief (PIOA) Level Select Register */ +#define REG_PIOA_ELSR (0x400E0EC8U) /**< \brief (PIOA) Edge/Level Status Register */ +#define REG_PIOA_FELLSR (0x400E0ED0U) /**< \brief (PIOA) Falling Edge/Low Level Select Register */ +#define REG_PIOA_REHLSR (0x400E0ED4U) /**< \brief (PIOA) Rising Edge/ High Level Select Register */ +#define REG_PIOA_FRLHSR (0x400E0ED8U) /**< \brief (PIOA) Fall/Rise - Low/High Status Register */ +#define REG_PIOA_LOCKSR (0x400E0EE0U) /**< \brief (PIOA) Lock Status */ +#define REG_PIOA_WPMR (0x400E0EE4U) /**< \brief (PIOA) Write Protect Mode Register */ +#define REG_PIOA_WPSR (0x400E0EE8U) /**< \brief (PIOA) Write Protect Status Register */ +#define REG_PIOA_SCHMITT (0x400E0F00U) /**< \brief (PIOA) Schmitt Trigger Register */ +#define REG_PIOA_PCMR (0x400E0F50U) /**< \brief (PIOA) Parallel Capture Mode Register */ +#define REG_PIOA_PCIER (0x400E0F54U) /**< \brief (PIOA) Parallel Capture Interrupt Enable Register */ +#define REG_PIOA_PCIDR (0x400E0F58U) /**< \brief (PIOA) Parallel Capture Interrupt Disable Register */ +#define REG_PIOA_PCIMR (0x400E0F5CU) /**< \brief (PIOA) Parallel Capture Interrupt Mask Register */ +#define REG_PIOA_PCISR (0x400E0F60U) /**< \brief (PIOA) Parallel Capture Interrupt Status Register */ +#define REG_PIOA_PCRHR (0x400E0F64U) /**< \brief (PIOA) Parallel Capture Reception Holding Register */ +#define REG_PIOA_RPR (0x400E0F68U) /**< \brief (PIOA) Receive Pointer Register */ +#define REG_PIOA_RCR (0x400E0F6CU) /**< \brief (PIOA) Receive Counter Register */ +#define REG_PIOA_RNPR (0x400E0F78U) /**< \brief (PIOA) Receive Next Pointer Register */ +#define REG_PIOA_RNCR (0x400E0F7CU) /**< \brief (PIOA) Receive Next Counter Register */ +#define REG_PIOA_PTCR (0x400E0F88U) /**< \brief (PIOA) Transfer Control Register */ +#define REG_PIOA_PTSR (0x400E0F8CU) /**< \brief (PIOA) Transfer Status Register */ +#else +#define REG_PIOA_PER (*(WoReg*)0x400E0E00U) /**< \brief (PIOA) PIO Enable Register */ +#define REG_PIOA_PDR (*(WoReg*)0x400E0E04U) /**< \brief (PIOA) PIO Disable Register */ +#define REG_PIOA_PSR (*(RoReg*)0x400E0E08U) /**< \brief (PIOA) PIO Status Register */ +#define REG_PIOA_OER (*(WoReg*)0x400E0E10U) /**< \brief (PIOA) Output Enable Register */ +#define REG_PIOA_ODR (*(WoReg*)0x400E0E14U) /**< \brief (PIOA) Output Disable Register */ +#define REG_PIOA_OSR (*(RoReg*)0x400E0E18U) /**< \brief (PIOA) Output Status Register */ +#define REG_PIOA_IFER (*(WoReg*)0x400E0E20U) /**< \brief (PIOA) Glitch Input Filter Enable Register */ +#define REG_PIOA_IFDR (*(WoReg*)0x400E0E24U) /**< \brief (PIOA) Glitch Input Filter Disable Register */ +#define REG_PIOA_IFSR (*(RoReg*)0x400E0E28U) /**< \brief (PIOA) Glitch Input Filter Status Register */ +#define REG_PIOA_SODR (*(WoReg*)0x400E0E30U) /**< \brief (PIOA) Set Output Data Register */ +#define REG_PIOA_CODR (*(WoReg*)0x400E0E34U) /**< \brief (PIOA) Clear Output Data Register */ +#define REG_PIOA_ODSR (*(RwReg*)0x400E0E38U) /**< \brief (PIOA) Output Data Status Register */ +#define REG_PIOA_PDSR (*(RoReg*)0x400E0E3CU) /**< \brief (PIOA) Pin Data Status Register */ +#define REG_PIOA_IER (*(WoReg*)0x400E0E40U) /**< \brief (PIOA) Interrupt Enable Register */ +#define REG_PIOA_IDR (*(WoReg*)0x400E0E44U) /**< \brief (PIOA) Interrupt Disable Register */ +#define REG_PIOA_IMR (*(RoReg*)0x400E0E48U) /**< \brief (PIOA) Interrupt Mask Register */ +#define REG_PIOA_ISR (*(RoReg*)0x400E0E4CU) /**< \brief (PIOA) Interrupt Status Register */ +#define REG_PIOA_MDER (*(WoReg*)0x400E0E50U) /**< \brief (PIOA) Multi-driver Enable Register */ +#define REG_PIOA_MDDR (*(WoReg*)0x400E0E54U) /**< \brief (PIOA) Multi-driver Disable Register */ +#define REG_PIOA_MDSR (*(RoReg*)0x400E0E58U) /**< \brief (PIOA) Multi-driver Status Register */ +#define REG_PIOA_PUDR (*(WoReg*)0x400E0E60U) /**< \brief (PIOA) Pull-up Disable Register */ +#define REG_PIOA_PUER (*(WoReg*)0x400E0E64U) /**< \brief (PIOA) Pull-up Enable Register */ +#define REG_PIOA_PUSR (*(RoReg*)0x400E0E68U) /**< \brief (PIOA) Pad Pull-up Status Register */ +#define REG_PIOA_ABCDSR (*(RwReg*)0x400E0E70U) /**< \brief (PIOA) Peripheral Select Register */ +#define REG_PIOA_IFSCDR (*(WoReg*)0x400E0E80U) /**< \brief (PIOA) Input Filter Slow Clock Disable Register */ +#define REG_PIOA_IFSCER (*(WoReg*)0x400E0E84U) /**< \brief (PIOA) Input Filter Slow Clock Enable Register */ +#define REG_PIOA_IFSCSR (*(RoReg*)0x400E0E88U) /**< \brief (PIOA) Input Filter Slow Clock Status Register */ +#define REG_PIOA_SCDR (*(RwReg*)0x400E0E8CU) /**< \brief (PIOA) Slow Clock Divider Debouncing Register */ +#define REG_PIOA_PPDDR (*(WoReg*)0x400E0E90U) /**< \brief (PIOA) Pad Pull-down Disable Register */ +#define REG_PIOA_PPDER (*(WoReg*)0x400E0E94U) /**< \brief (PIOA) Pad Pull-down Enable Register */ +#define REG_PIOA_PPDSR (*(RoReg*)0x400E0E98U) /**< \brief (PIOA) Pad Pull-down Status Register */ +#define REG_PIOA_OWER (*(WoReg*)0x400E0EA0U) /**< \brief (PIOA) Output Write Enable */ +#define REG_PIOA_OWDR (*(WoReg*)0x400E0EA4U) /**< \brief (PIOA) Output Write Disable */ +#define REG_PIOA_OWSR (*(RoReg*)0x400E0EA8U) /**< \brief (PIOA) Output Write Status Register */ +#define REG_PIOA_AIMER (*(WoReg*)0x400E0EB0U) /**< \brief (PIOA) Additional Interrupt Modes Enable Register */ +#define REG_PIOA_AIMDR (*(WoReg*)0x400E0EB4U) /**< \brief (PIOA) Additional Interrupt Modes Disables Register */ +#define REG_PIOA_AIMMR (*(RoReg*)0x400E0EB8U) /**< \brief (PIOA) Additional Interrupt Modes Mask Register */ +#define REG_PIOA_ESR (*(WoReg*)0x400E0EC0U) /**< \brief (PIOA) Edge Select Register */ +#define REG_PIOA_LSR (*(WoReg*)0x400E0EC4U) /**< \brief (PIOA) Level Select Register */ +#define REG_PIOA_ELSR (*(RoReg*)0x400E0EC8U) /**< \brief (PIOA) Edge/Level Status Register */ +#define REG_PIOA_FELLSR (*(WoReg*)0x400E0ED0U) /**< \brief (PIOA) Falling Edge/Low Level Select Register */ +#define REG_PIOA_REHLSR (*(WoReg*)0x400E0ED4U) /**< \brief (PIOA) Rising Edge/ High Level Select Register */ +#define REG_PIOA_FRLHSR (*(RoReg*)0x400E0ED8U) /**< \brief (PIOA) Fall/Rise - Low/High Status Register */ +#define REG_PIOA_LOCKSR (*(RoReg*)0x400E0EE0U) /**< \brief (PIOA) Lock Status */ +#define REG_PIOA_WPMR (*(RwReg*)0x400E0EE4U) /**< \brief (PIOA) Write Protect Mode Register */ +#define REG_PIOA_WPSR (*(RoReg*)0x400E0EE8U) /**< \brief (PIOA) Write Protect Status Register */ +#define REG_PIOA_SCHMITT (*(RwReg*)0x400E0F00U) /**< \brief (PIOA) Schmitt Trigger Register */ +#define REG_PIOA_PCMR (*(RwReg*)0x400E0F50U) /**< \brief (PIOA) Parallel Capture Mode Register */ +#define REG_PIOA_PCIER (*(WoReg*)0x400E0F54U) /**< \brief (PIOA) Parallel Capture Interrupt Enable Register */ +#define REG_PIOA_PCIDR (*(WoReg*)0x400E0F58U) /**< \brief (PIOA) Parallel Capture Interrupt Disable Register */ +#define REG_PIOA_PCIMR (*(RoReg*)0x400E0F5CU) /**< \brief (PIOA) Parallel Capture Interrupt Mask Register */ +#define REG_PIOA_PCISR (*(RoReg*)0x400E0F60U) /**< \brief (PIOA) Parallel Capture Interrupt Status Register */ +#define REG_PIOA_PCRHR (*(RoReg*)0x400E0F64U) /**< \brief (PIOA) Parallel Capture Reception Holding Register */ +#define REG_PIOA_RPR (*(RwReg*)0x400E0F68U) /**< \brief (PIOA) Receive Pointer Register */ +#define REG_PIOA_RCR (*(RwReg*)0x400E0F6CU) /**< \brief (PIOA) Receive Counter Register */ +#define REG_PIOA_RNPR (*(RwReg*)0x400E0F78U) /**< \brief (PIOA) Receive Next Pointer Register */ +#define REG_PIOA_RNCR (*(RwReg*)0x400E0F7CU) /**< \brief (PIOA) Receive Next Counter Register */ +#define REG_PIOA_PTCR (*(WoReg*)0x400E0F88U) /**< \brief (PIOA) Transfer Control Register */ +#define REG_PIOA_PTSR (*(RoReg*)0x400E0F8CU) /**< \brief (PIOA) Transfer Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_PIOA_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_piob.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_piob.h new file mode 100644 index 0000000..68f93a9 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_piob.h
@@ -0,0 +1,154 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_PIOB_INSTANCE_ +#define _SAM4S_PIOB_INSTANCE_ + +/* ========== Register definition for PIOB peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_PIOB_PER (0x400E1000U) /**< \brief (PIOB) PIO Enable Register */ +#define REG_PIOB_PDR (0x400E1004U) /**< \brief (PIOB) PIO Disable Register */ +#define REG_PIOB_PSR (0x400E1008U) /**< \brief (PIOB) PIO Status Register */ +#define REG_PIOB_OER (0x400E1010U) /**< \brief (PIOB) Output Enable Register */ +#define REG_PIOB_ODR (0x400E1014U) /**< \brief (PIOB) Output Disable Register */ +#define REG_PIOB_OSR (0x400E1018U) /**< \brief (PIOB) Output Status Register */ +#define REG_PIOB_IFER (0x400E1020U) /**< \brief (PIOB) Glitch Input Filter Enable Register */ +#define REG_PIOB_IFDR (0x400E1024U) /**< \brief (PIOB) Glitch Input Filter Disable Register */ +#define REG_PIOB_IFSR (0x400E1028U) /**< \brief (PIOB) Glitch Input Filter Status Register */ +#define REG_PIOB_SODR (0x400E1030U) /**< \brief (PIOB) Set Output Data Register */ +#define REG_PIOB_CODR (0x400E1034U) /**< \brief (PIOB) Clear Output Data Register */ +#define REG_PIOB_ODSR (0x400E1038U) /**< \brief (PIOB) Output Data Status Register */ +#define REG_PIOB_PDSR (0x400E103CU) /**< \brief (PIOB) Pin Data Status Register */ +#define REG_PIOB_IER (0x400E1040U) /**< \brief (PIOB) Interrupt Enable Register */ +#define REG_PIOB_IDR (0x400E1044U) /**< \brief (PIOB) Interrupt Disable Register */ +#define REG_PIOB_IMR (0x400E1048U) /**< \brief (PIOB) Interrupt Mask Register */ +#define REG_PIOB_ISR (0x400E104CU) /**< \brief (PIOB) Interrupt Status Register */ +#define REG_PIOB_MDER (0x400E1050U) /**< \brief (PIOB) Multi-driver Enable Register */ +#define REG_PIOB_MDDR (0x400E1054U) /**< \brief (PIOB) Multi-driver Disable Register */ +#define REG_PIOB_MDSR (0x400E1058U) /**< \brief (PIOB) Multi-driver Status Register */ +#define REG_PIOB_PUDR (0x400E1060U) /**< \brief (PIOB) Pull-up Disable Register */ +#define REG_PIOB_PUER (0x400E1064U) /**< \brief (PIOB) Pull-up Enable Register */ +#define REG_PIOB_PUSR (0x400E1068U) /**< \brief (PIOB) Pad Pull-up Status Register */ +#define REG_PIOB_ABCDSR (0x400E1070U) /**< \brief (PIOB) Peripheral Select Register */ +#define REG_PIOB_IFSCDR (0x400E1080U) /**< \brief (PIOB) Input Filter Slow Clock Disable Register */ +#define REG_PIOB_IFSCER (0x400E1084U) /**< \brief (PIOB) Input Filter Slow Clock Enable Register */ +#define REG_PIOB_IFSCSR (0x400E1088U) /**< \brief (PIOB) Input Filter Slow Clock Status Register */ +#define REG_PIOB_SCDR (0x400E108CU) /**< \brief (PIOB) Slow Clock Divider Debouncing Register */ +#define REG_PIOB_PPDDR (0x400E1090U) /**< \brief (PIOB) Pad Pull-down Disable Register */ +#define REG_PIOB_PPDER (0x400E1094U) /**< \brief (PIOB) Pad Pull-down Enable Register */ +#define REG_PIOB_PPDSR (0x400E1098U) /**< \brief (PIOB) Pad Pull-down Status Register */ +#define REG_PIOB_OWER (0x400E10A0U) /**< \brief (PIOB) Output Write Enable */ +#define REG_PIOB_OWDR (0x400E10A4U) /**< \brief (PIOB) Output Write Disable */ +#define REG_PIOB_OWSR (0x400E10A8U) /**< \brief (PIOB) Output Write Status Register */ +#define REG_PIOB_AIMER (0x400E10B0U) /**< \brief (PIOB) Additional Interrupt Modes Enable Register */ +#define REG_PIOB_AIMDR (0x400E10B4U) /**< \brief (PIOB) Additional Interrupt Modes Disables Register */ +#define REG_PIOB_AIMMR (0x400E10B8U) /**< \brief (PIOB) Additional Interrupt Modes Mask Register */ +#define REG_PIOB_ESR (0x400E10C0U) /**< \brief (PIOB) Edge Select Register */ +#define REG_PIOB_LSR (0x400E10C4U) /**< \brief (PIOB) Level Select Register */ +#define REG_PIOB_ELSR (0x400E10C8U) /**< \brief (PIOB) Edge/Level Status Register */ +#define REG_PIOB_FELLSR (0x400E10D0U) /**< \brief (PIOB) Falling Edge/Low Level Select Register */ +#define REG_PIOB_REHLSR (0x400E10D4U) /**< \brief (PIOB) Rising Edge/ High Level Select Register */ +#define REG_PIOB_FRLHSR (0x400E10D8U) /**< \brief (PIOB) Fall/Rise - Low/High Status Register */ +#define REG_PIOB_LOCKSR (0x400E10E0U) /**< \brief (PIOB) Lock Status */ +#define REG_PIOB_WPMR (0x400E10E4U) /**< \brief (PIOB) Write Protect Mode Register */ +#define REG_PIOB_WPSR (0x400E10E8U) /**< \brief (PIOB) Write Protect Status Register */ +#define REG_PIOB_SCHMITT (0x400E1100U) /**< \brief (PIOB) Schmitt Trigger Register */ +#define REG_PIOB_PCMR (0x400E1150U) /**< \brief (PIOB) Parallel Capture Mode Register */ +#define REG_PIOB_PCIER (0x400E1154U) /**< \brief (PIOB) Parallel Capture Interrupt Enable Register */ +#define REG_PIOB_PCIDR (0x400E1158U) /**< \brief (PIOB) Parallel Capture Interrupt Disable Register */ +#define REG_PIOB_PCIMR (0x400E115CU) /**< \brief (PIOB) Parallel Capture Interrupt Mask Register */ +#define REG_PIOB_PCISR (0x400E1160U) /**< \brief (PIOB) Parallel Capture Interrupt Status Register */ +#define REG_PIOB_PCRHR (0x400E1164U) /**< \brief (PIOB) Parallel Capture Reception Holding Register */ +#else +#define REG_PIOB_PER (*(WoReg*)0x400E1000U) /**< \brief (PIOB) PIO Enable Register */ +#define REG_PIOB_PDR (*(WoReg*)0x400E1004U) /**< \brief (PIOB) PIO Disable Register */ +#define REG_PIOB_PSR (*(RoReg*)0x400E1008U) /**< \brief (PIOB) PIO Status Register */ +#define REG_PIOB_OER (*(WoReg*)0x400E1010U) /**< \brief (PIOB) Output Enable Register */ +#define REG_PIOB_ODR (*(WoReg*)0x400E1014U) /**< \brief (PIOB) Output Disable Register */ +#define REG_PIOB_OSR (*(RoReg*)0x400E1018U) /**< \brief (PIOB) Output Status Register */ +#define REG_PIOB_IFER (*(WoReg*)0x400E1020U) /**< \brief (PIOB) Glitch Input Filter Enable Register */ +#define REG_PIOB_IFDR (*(WoReg*)0x400E1024U) /**< \brief (PIOB) Glitch Input Filter Disable Register */ +#define REG_PIOB_IFSR (*(RoReg*)0x400E1028U) /**< \brief (PIOB) Glitch Input Filter Status Register */ +#define REG_PIOB_SODR (*(WoReg*)0x400E1030U) /**< \brief (PIOB) Set Output Data Register */ +#define REG_PIOB_CODR (*(WoReg*)0x400E1034U) /**< \brief (PIOB) Clear Output Data Register */ +#define REG_PIOB_ODSR (*(RwReg*)0x400E1038U) /**< \brief (PIOB) Output Data Status Register */ +#define REG_PIOB_PDSR (*(RoReg*)0x400E103CU) /**< \brief (PIOB) Pin Data Status Register */ +#define REG_PIOB_IER (*(WoReg*)0x400E1040U) /**< \brief (PIOB) Interrupt Enable Register */ +#define REG_PIOB_IDR (*(WoReg*)0x400E1044U) /**< \brief (PIOB) Interrupt Disable Register */ +#define REG_PIOB_IMR (*(RoReg*)0x400E1048U) /**< \brief (PIOB) Interrupt Mask Register */ +#define REG_PIOB_ISR (*(RoReg*)0x400E104CU) /**< \brief (PIOB) Interrupt Status Register */ +#define REG_PIOB_MDER (*(WoReg*)0x400E1050U) /**< \brief (PIOB) Multi-driver Enable Register */ +#define REG_PIOB_MDDR (*(WoReg*)0x400E1054U) /**< \brief (PIOB) Multi-driver Disable Register */ +#define REG_PIOB_MDSR (*(RoReg*)0x400E1058U) /**< \brief (PIOB) Multi-driver Status Register */ +#define REG_PIOB_PUDR (*(WoReg*)0x400E1060U) /**< \brief (PIOB) Pull-up Disable Register */ +#define REG_PIOB_PUER (*(WoReg*)0x400E1064U) /**< \brief (PIOB) Pull-up Enable Register */ +#define REG_PIOB_PUSR (*(RoReg*)0x400E1068U) /**< \brief (PIOB) Pad Pull-up Status Register */ +#define REG_PIOB_ABCDSR (*(RwReg*)0x400E1070U) /**< \brief (PIOB) Peripheral Select Register */ +#define REG_PIOB_IFSCDR (*(WoReg*)0x400E1080U) /**< \brief (PIOB) Input Filter Slow Clock Disable Register */ +#define REG_PIOB_IFSCER (*(WoReg*)0x400E1084U) /**< \brief (PIOB) Input Filter Slow Clock Enable Register */ +#define REG_PIOB_IFSCSR (*(RoReg*)0x400E1088U) /**< \brief (PIOB) Input Filter Slow Clock Status Register */ +#define REG_PIOB_SCDR (*(RwReg*)0x400E108CU) /**< \brief (PIOB) Slow Clock Divider Debouncing Register */ +#define REG_PIOB_PPDDR (*(WoReg*)0x400E1090U) /**< \brief (PIOB) Pad Pull-down Disable Register */ +#define REG_PIOB_PPDER (*(WoReg*)0x400E1094U) /**< \brief (PIOB) Pad Pull-down Enable Register */ +#define REG_PIOB_PPDSR (*(RoReg*)0x400E1098U) /**< \brief (PIOB) Pad Pull-down Status Register */ +#define REG_PIOB_OWER (*(WoReg*)0x400E10A0U) /**< \brief (PIOB) Output Write Enable */ +#define REG_PIOB_OWDR (*(WoReg*)0x400E10A4U) /**< \brief (PIOB) Output Write Disable */ +#define REG_PIOB_OWSR (*(RoReg*)0x400E10A8U) /**< \brief (PIOB) Output Write Status Register */ +#define REG_PIOB_AIMER (*(WoReg*)0x400E10B0U) /**< \brief (PIOB) Additional Interrupt Modes Enable Register */ +#define REG_PIOB_AIMDR (*(WoReg*)0x400E10B4U) /**< \brief (PIOB) Additional Interrupt Modes Disables Register */ +#define REG_PIOB_AIMMR (*(RoReg*)0x400E10B8U) /**< \brief (PIOB) Additional Interrupt Modes Mask Register */ +#define REG_PIOB_ESR (*(WoReg*)0x400E10C0U) /**< \brief (PIOB) Edge Select Register */ +#define REG_PIOB_LSR (*(WoReg*)0x400E10C4U) /**< \brief (PIOB) Level Select Register */ +#define REG_PIOB_ELSR (*(RoReg*)0x400E10C8U) /**< \brief (PIOB) Edge/Level Status Register */ +#define REG_PIOB_FELLSR (*(WoReg*)0x400E10D0U) /**< \brief (PIOB) Falling Edge/Low Level Select Register */ +#define REG_PIOB_REHLSR (*(WoReg*)0x400E10D4U) /**< \brief (PIOB) Rising Edge/ High Level Select Register */ +#define REG_PIOB_FRLHSR (*(RoReg*)0x400E10D8U) /**< \brief (PIOB) Fall/Rise - Low/High Status Register */ +#define REG_PIOB_LOCKSR (*(RoReg*)0x400E10E0U) /**< \brief (PIOB) Lock Status */ +#define REG_PIOB_WPMR (*(RwReg*)0x400E10E4U) /**< \brief (PIOB) Write Protect Mode Register */ +#define REG_PIOB_WPSR (*(RoReg*)0x400E10E8U) /**< \brief (PIOB) Write Protect Status Register */ +#define REG_PIOB_SCHMITT (*(RwReg*)0x400E1100U) /**< \brief (PIOB) Schmitt Trigger Register */ +#define REG_PIOB_PCMR (*(RwReg*)0x400E1150U) /**< \brief (PIOB) Parallel Capture Mode Register */ +#define REG_PIOB_PCIER (*(WoReg*)0x400E1154U) /**< \brief (PIOB) Parallel Capture Interrupt Enable Register */ +#define REG_PIOB_PCIDR (*(WoReg*)0x400E1158U) /**< \brief (PIOB) Parallel Capture Interrupt Disable Register */ +#define REG_PIOB_PCIMR (*(RoReg*)0x400E115CU) /**< \brief (PIOB) Parallel Capture Interrupt Mask Register */ +#define REG_PIOB_PCISR (*(RoReg*)0x400E1160U) /**< \brief (PIOB) Parallel Capture Interrupt Status Register */ +#define REG_PIOB_PCRHR (*(RoReg*)0x400E1164U) /**< \brief (PIOB) Parallel Capture Reception Holding Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_PIOB_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_pioc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_pioc.h new file mode 100644 index 0000000..added33 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_pioc.h
@@ -0,0 +1,154 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_PIOC_INSTANCE_ +#define _SAM4S_PIOC_INSTANCE_ + +/* ========== Register definition for PIOC peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_PIOC_PER (0x400E1200U) /**< \brief (PIOC) PIO Enable Register */ +#define REG_PIOC_PDR (0x400E1204U) /**< \brief (PIOC) PIO Disable Register */ +#define REG_PIOC_PSR (0x400E1208U) /**< \brief (PIOC) PIO Status Register */ +#define REG_PIOC_OER (0x400E1210U) /**< \brief (PIOC) Output Enable Register */ +#define REG_PIOC_ODR (0x400E1214U) /**< \brief (PIOC) Output Disable Register */ +#define REG_PIOC_OSR (0x400E1218U) /**< \brief (PIOC) Output Status Register */ +#define REG_PIOC_IFER (0x400E1220U) /**< \brief (PIOC) Glitch Input Filter Enable Register */ +#define REG_PIOC_IFDR (0x400E1224U) /**< \brief (PIOC) Glitch Input Filter Disable Register */ +#define REG_PIOC_IFSR (0x400E1228U) /**< \brief (PIOC) Glitch Input Filter Status Register */ +#define REG_PIOC_SODR (0x400E1230U) /**< \brief (PIOC) Set Output Data Register */ +#define REG_PIOC_CODR (0x400E1234U) /**< \brief (PIOC) Clear Output Data Register */ +#define REG_PIOC_ODSR (0x400E1238U) /**< \brief (PIOC) Output Data Status Register */ +#define REG_PIOC_PDSR (0x400E123CU) /**< \brief (PIOC) Pin Data Status Register */ +#define REG_PIOC_IER (0x400E1240U) /**< \brief (PIOC) Interrupt Enable Register */ +#define REG_PIOC_IDR (0x400E1244U) /**< \brief (PIOC) Interrupt Disable Register */ +#define REG_PIOC_IMR (0x400E1248U) /**< \brief (PIOC) Interrupt Mask Register */ +#define REG_PIOC_ISR (0x400E124CU) /**< \brief (PIOC) Interrupt Status Register */ +#define REG_PIOC_MDER (0x400E1250U) /**< \brief (PIOC) Multi-driver Enable Register */ +#define REG_PIOC_MDDR (0x400E1254U) /**< \brief (PIOC) Multi-driver Disable Register */ +#define REG_PIOC_MDSR (0x400E1258U) /**< \brief (PIOC) Multi-driver Status Register */ +#define REG_PIOC_PUDR (0x400E1260U) /**< \brief (PIOC) Pull-up Disable Register */ +#define REG_PIOC_PUER (0x400E1264U) /**< \brief (PIOC) Pull-up Enable Register */ +#define REG_PIOC_PUSR (0x400E1268U) /**< \brief (PIOC) Pad Pull-up Status Register */ +#define REG_PIOC_ABCDSR (0x400E1270U) /**< \brief (PIOC) Peripheral Select Register */ +#define REG_PIOC_IFSCDR (0x400E1280U) /**< \brief (PIOC) Input Filter Slow Clock Disable Register */ +#define REG_PIOC_IFSCER (0x400E1284U) /**< \brief (PIOC) Input Filter Slow Clock Enable Register */ +#define REG_PIOC_IFSCSR (0x400E1288U) /**< \brief (PIOC) Input Filter Slow Clock Status Register */ +#define REG_PIOC_SCDR (0x400E128CU) /**< \brief (PIOC) Slow Clock Divider Debouncing Register */ +#define REG_PIOC_PPDDR (0x400E1290U) /**< \brief (PIOC) Pad Pull-down Disable Register */ +#define REG_PIOC_PPDER (0x400E1294U) /**< \brief (PIOC) Pad Pull-down Enable Register */ +#define REG_PIOC_PPDSR (0x400E1298U) /**< \brief (PIOC) Pad Pull-down Status Register */ +#define REG_PIOC_OWER (0x400E12A0U) /**< \brief (PIOC) Output Write Enable */ +#define REG_PIOC_OWDR (0x400E12A4U) /**< \brief (PIOC) Output Write Disable */ +#define REG_PIOC_OWSR (0x400E12A8U) /**< \brief (PIOC) Output Write Status Register */ +#define REG_PIOC_AIMER (0x400E12B0U) /**< \brief (PIOC) Additional Interrupt Modes Enable Register */ +#define REG_PIOC_AIMDR (0x400E12B4U) /**< \brief (PIOC) Additional Interrupt Modes Disables Register */ +#define REG_PIOC_AIMMR (0x400E12B8U) /**< \brief (PIOC) Additional Interrupt Modes Mask Register */ +#define REG_PIOC_ESR (0x400E12C0U) /**< \brief (PIOC) Edge Select Register */ +#define REG_PIOC_LSR (0x400E12C4U) /**< \brief (PIOC) Level Select Register */ +#define REG_PIOC_ELSR (0x400E12C8U) /**< \brief (PIOC) Edge/Level Status Register */ +#define REG_PIOC_FELLSR (0x400E12D0U) /**< \brief (PIOC) Falling Edge/Low Level Select Register */ +#define REG_PIOC_REHLSR (0x400E12D4U) /**< \brief (PIOC) Rising Edge/ High Level Select Register */ +#define REG_PIOC_FRLHSR (0x400E12D8U) /**< \brief (PIOC) Fall/Rise - Low/High Status Register */ +#define REG_PIOC_LOCKSR (0x400E12E0U) /**< \brief (PIOC) Lock Status */ +#define REG_PIOC_WPMR (0x400E12E4U) /**< \brief (PIOC) Write Protect Mode Register */ +#define REG_PIOC_WPSR (0x400E12E8U) /**< \brief (PIOC) Write Protect Status Register */ +#define REG_PIOC_SCHMITT (0x400E1300U) /**< \brief (PIOC) Schmitt Trigger Register */ +#define REG_PIOC_PCMR (0x400E1350U) /**< \brief (PIOC) Parallel Capture Mode Register */ +#define REG_PIOC_PCIER (0x400E1354U) /**< \brief (PIOC) Parallel Capture Interrupt Enable Register */ +#define REG_PIOC_PCIDR (0x400E1358U) /**< \brief (PIOC) Parallel Capture Interrupt Disable Register */ +#define REG_PIOC_PCIMR (0x400E135CU) /**< \brief (PIOC) Parallel Capture Interrupt Mask Register */ +#define REG_PIOC_PCISR (0x400E1360U) /**< \brief (PIOC) Parallel Capture Interrupt Status Register */ +#define REG_PIOC_PCRHR (0x400E1364U) /**< \brief (PIOC) Parallel Capture Reception Holding Register */ +#else +#define REG_PIOC_PER (*(WoReg*)0x400E1200U) /**< \brief (PIOC) PIO Enable Register */ +#define REG_PIOC_PDR (*(WoReg*)0x400E1204U) /**< \brief (PIOC) PIO Disable Register */ +#define REG_PIOC_PSR (*(RoReg*)0x400E1208U) /**< \brief (PIOC) PIO Status Register */ +#define REG_PIOC_OER (*(WoReg*)0x400E1210U) /**< \brief (PIOC) Output Enable Register */ +#define REG_PIOC_ODR (*(WoReg*)0x400E1214U) /**< \brief (PIOC) Output Disable Register */ +#define REG_PIOC_OSR (*(RoReg*)0x400E1218U) /**< \brief (PIOC) Output Status Register */ +#define REG_PIOC_IFER (*(WoReg*)0x400E1220U) /**< \brief (PIOC) Glitch Input Filter Enable Register */ +#define REG_PIOC_IFDR (*(WoReg*)0x400E1224U) /**< \brief (PIOC) Glitch Input Filter Disable Register */ +#define REG_PIOC_IFSR (*(RoReg*)0x400E1228U) /**< \brief (PIOC) Glitch Input Filter Status Register */ +#define REG_PIOC_SODR (*(WoReg*)0x400E1230U) /**< \brief (PIOC) Set Output Data Register */ +#define REG_PIOC_CODR (*(WoReg*)0x400E1234U) /**< \brief (PIOC) Clear Output Data Register */ +#define REG_PIOC_ODSR (*(RwReg*)0x400E1238U) /**< \brief (PIOC) Output Data Status Register */ +#define REG_PIOC_PDSR (*(RoReg*)0x400E123CU) /**< \brief (PIOC) Pin Data Status Register */ +#define REG_PIOC_IER (*(WoReg*)0x400E1240U) /**< \brief (PIOC) Interrupt Enable Register */ +#define REG_PIOC_IDR (*(WoReg*)0x400E1244U) /**< \brief (PIOC) Interrupt Disable Register */ +#define REG_PIOC_IMR (*(RoReg*)0x400E1248U) /**< \brief (PIOC) Interrupt Mask Register */ +#define REG_PIOC_ISR (*(RoReg*)0x400E124CU) /**< \brief (PIOC) Interrupt Status Register */ +#define REG_PIOC_MDER (*(WoReg*)0x400E1250U) /**< \brief (PIOC) Multi-driver Enable Register */ +#define REG_PIOC_MDDR (*(WoReg*)0x400E1254U) /**< \brief (PIOC) Multi-driver Disable Register */ +#define REG_PIOC_MDSR (*(RoReg*)0x400E1258U) /**< \brief (PIOC) Multi-driver Status Register */ +#define REG_PIOC_PUDR (*(WoReg*)0x400E1260U) /**< \brief (PIOC) Pull-up Disable Register */ +#define REG_PIOC_PUER (*(WoReg*)0x400E1264U) /**< \brief (PIOC) Pull-up Enable Register */ +#define REG_PIOC_PUSR (*(RoReg*)0x400E1268U) /**< \brief (PIOC) Pad Pull-up Status Register */ +#define REG_PIOC_ABCDSR (*(RwReg*)0x400E1270U) /**< \brief (PIOC) Peripheral Select Register */ +#define REG_PIOC_IFSCDR (*(WoReg*)0x400E1280U) /**< \brief (PIOC) Input Filter Slow Clock Disable Register */ +#define REG_PIOC_IFSCER (*(WoReg*)0x400E1284U) /**< \brief (PIOC) Input Filter Slow Clock Enable Register */ +#define REG_PIOC_IFSCSR (*(RoReg*)0x400E1288U) /**< \brief (PIOC) Input Filter Slow Clock Status Register */ +#define REG_PIOC_SCDR (*(RwReg*)0x400E128CU) /**< \brief (PIOC) Slow Clock Divider Debouncing Register */ +#define REG_PIOC_PPDDR (*(WoReg*)0x400E1290U) /**< \brief (PIOC) Pad Pull-down Disable Register */ +#define REG_PIOC_PPDER (*(WoReg*)0x400E1294U) /**< \brief (PIOC) Pad Pull-down Enable Register */ +#define REG_PIOC_PPDSR (*(RoReg*)0x400E1298U) /**< \brief (PIOC) Pad Pull-down Status Register */ +#define REG_PIOC_OWER (*(WoReg*)0x400E12A0U) /**< \brief (PIOC) Output Write Enable */ +#define REG_PIOC_OWDR (*(WoReg*)0x400E12A4U) /**< \brief (PIOC) Output Write Disable */ +#define REG_PIOC_OWSR (*(RoReg*)0x400E12A8U) /**< \brief (PIOC) Output Write Status Register */ +#define REG_PIOC_AIMER (*(WoReg*)0x400E12B0U) /**< \brief (PIOC) Additional Interrupt Modes Enable Register */ +#define REG_PIOC_AIMDR (*(WoReg*)0x400E12B4U) /**< \brief (PIOC) Additional Interrupt Modes Disables Register */ +#define REG_PIOC_AIMMR (*(RoReg*)0x400E12B8U) /**< \brief (PIOC) Additional Interrupt Modes Mask Register */ +#define REG_PIOC_ESR (*(WoReg*)0x400E12C0U) /**< \brief (PIOC) Edge Select Register */ +#define REG_PIOC_LSR (*(WoReg*)0x400E12C4U) /**< \brief (PIOC) Level Select Register */ +#define REG_PIOC_ELSR (*(RoReg*)0x400E12C8U) /**< \brief (PIOC) Edge/Level Status Register */ +#define REG_PIOC_FELLSR (*(WoReg*)0x400E12D0U) /**< \brief (PIOC) Falling Edge/Low Level Select Register */ +#define REG_PIOC_REHLSR (*(WoReg*)0x400E12D4U) /**< \brief (PIOC) Rising Edge/ High Level Select Register */ +#define REG_PIOC_FRLHSR (*(RoReg*)0x400E12D8U) /**< \brief (PIOC) Fall/Rise - Low/High Status Register */ +#define REG_PIOC_LOCKSR (*(RoReg*)0x400E12E0U) /**< \brief (PIOC) Lock Status */ +#define REG_PIOC_WPMR (*(RwReg*)0x400E12E4U) /**< \brief (PIOC) Write Protect Mode Register */ +#define REG_PIOC_WPSR (*(RoReg*)0x400E12E8U) /**< \brief (PIOC) Write Protect Status Register */ +#define REG_PIOC_SCHMITT (*(RwReg*)0x400E1300U) /**< \brief (PIOC) Schmitt Trigger Register */ +#define REG_PIOC_PCMR (*(RwReg*)0x400E1350U) /**< \brief (PIOC) Parallel Capture Mode Register */ +#define REG_PIOC_PCIER (*(WoReg*)0x400E1354U) /**< \brief (PIOC) Parallel Capture Interrupt Enable Register */ +#define REG_PIOC_PCIDR (*(WoReg*)0x400E1358U) /**< \brief (PIOC) Parallel Capture Interrupt Disable Register */ +#define REG_PIOC_PCIMR (*(RoReg*)0x400E135CU) /**< \brief (PIOC) Parallel Capture Interrupt Mask Register */ +#define REG_PIOC_PCISR (*(RoReg*)0x400E1360U) /**< \brief (PIOC) Parallel Capture Interrupt Status Register */ +#define REG_PIOC_PCRHR (*(RoReg*)0x400E1364U) /**< \brief (PIOC) Parallel Capture Reception Holding Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_PIOC_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_pmc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_pmc.h new file mode 100644 index 0000000..ed42182 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_pmc.h
@@ -0,0 +1,100 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_PMC_INSTANCE_ +#define _SAM4S_PMC_INSTANCE_ + +/* ========== Register definition for PMC peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_PMC_SCER (0x400E0400U) /**< \brief (PMC) System Clock Enable Register */ +#define REG_PMC_SCDR (0x400E0404U) /**< \brief (PMC) System Clock Disable Register */ +#define REG_PMC_SCSR (0x400E0408U) /**< \brief (PMC) System Clock Status Register */ +#define REG_PMC_PCER0 (0x400E0410U) /**< \brief (PMC) Peripheral Clock Enable Register 0 */ +#define REG_PMC_PCDR0 (0x400E0414U) /**< \brief (PMC) Peripheral Clock Disable Register 0 */ +#define REG_PMC_PCSR0 (0x400E0418U) /**< \brief (PMC) Peripheral Clock Status Register 0 */ +#define REG_CKGR_MOR (0x400E0420U) /**< \brief (PMC) Main Oscillator Register */ +#define REG_CKGR_MCFR (0x400E0424U) /**< \brief (PMC) Main Clock Frequency Register */ +#define REG_CKGR_PLLAR (0x400E0428U) /**< \brief (PMC) PLLA Register */ +#define REG_CKGR_PLLBR (0x400E042CU) /**< \brief (PMC) PLLB Register */ +#define REG_PMC_MCKR (0x400E0430U) /**< \brief (PMC) Master Clock Register */ +#define REG_PMC_USB (0x400E0438U) /**< \brief (PMC) USB Clock Register */ +#define REG_PMC_PCK (0x400E0440U) /**< \brief (PMC) Programmable Clock 0 Register */ +#define REG_PMC_IER (0x400E0460U) /**< \brief (PMC) Interrupt Enable Register */ +#define REG_PMC_IDR (0x400E0464U) /**< \brief (PMC) Interrupt Disable Register */ +#define REG_PMC_SR (0x400E0468U) /**< \brief (PMC) Status Register */ +#define REG_PMC_IMR (0x400E046CU) /**< \brief (PMC) Interrupt Mask Register */ +#define REG_PMC_FSMR (0x400E0470U) /**< \brief (PMC) Fast Startup Mode Register */ +#define REG_PMC_FSPR (0x400E0474U) /**< \brief (PMC) Fast Startup Polarity Register */ +#define REG_PMC_FOCR (0x400E0478U) /**< \brief (PMC) Fault Output Clear Register */ +#define REG_PMC_WPMR (0x400E04E4U) /**< \brief (PMC) Write Protect Mode Register */ +#define REG_PMC_WPSR (0x400E04E8U) /**< \brief (PMC) Write Protect Status Register */ +#define REG_PMC_PCER1 (0x400E0500U) /**< \brief (PMC) Peripheral Clock Enable Register 1 */ +#define REG_PMC_PCDR1 (0x400E0504U) /**< \brief (PMC) Peripheral Clock Disable Register 1 */ +#define REG_PMC_PCSR1 (0x400E0508U) /**< \brief (PMC) Peripheral Clock Status Register 1 */ +#define REG_PMC_OCR (0x400E0510U) /**< \brief (PMC) Oscillator Calibration Register */ +#else +#define REG_PMC_SCER (*(WoReg*)0x400E0400U) /**< \brief (PMC) System Clock Enable Register */ +#define REG_PMC_SCDR (*(WoReg*)0x400E0404U) /**< \brief (PMC) System Clock Disable Register */ +#define REG_PMC_SCSR (*(RoReg*)0x400E0408U) /**< \brief (PMC) System Clock Status Register */ +#define REG_PMC_PCER0 (*(WoReg*)0x400E0410U) /**< \brief (PMC) Peripheral Clock Enable Register 0 */ +#define REG_PMC_PCDR0 (*(WoReg*)0x400E0414U) /**< \brief (PMC) Peripheral Clock Disable Register 0 */ +#define REG_PMC_PCSR0 (*(RoReg*)0x400E0418U) /**< \brief (PMC) Peripheral Clock Status Register 0 */ +#define REG_CKGR_MOR (*(RwReg*)0x400E0420U) /**< \brief (PMC) Main Oscillator Register */ +#define REG_CKGR_MCFR (*(RwReg*)0x400E0424U) /**< \brief (PMC) Main Clock Frequency Register */ +#define REG_CKGR_PLLAR (*(RwReg*)0x400E0428U) /**< \brief (PMC) PLLA Register */ +#define REG_CKGR_PLLBR (*(RwReg*)0x400E042CU) /**< \brief (PMC) PLLB Register */ +#define REG_PMC_MCKR (*(RwReg*)0x400E0430U) /**< \brief (PMC) Master Clock Register */ +#define REG_PMC_USB (*(RwReg*)0x400E0438U) /**< \brief (PMC) USB Clock Register */ +#define REG_PMC_PCK (*(RwReg*)0x400E0440U) /**< \brief (PMC) Programmable Clock 0 Register */ +#define REG_PMC_IER (*(WoReg*)0x400E0460U) /**< \brief (PMC) Interrupt Enable Register */ +#define REG_PMC_IDR (*(WoReg*)0x400E0464U) /**< \brief (PMC) Interrupt Disable Register */ +#define REG_PMC_SR (*(RoReg*)0x400E0468U) /**< \brief (PMC) Status Register */ +#define REG_PMC_IMR (*(RoReg*)0x400E046CU) /**< \brief (PMC) Interrupt Mask Register */ +#define REG_PMC_FSMR (*(RwReg*)0x400E0470U) /**< \brief (PMC) Fast Startup Mode Register */ +#define REG_PMC_FSPR (*(RwReg*)0x400E0474U) /**< \brief (PMC) Fast Startup Polarity Register */ +#define REG_PMC_FOCR (*(WoReg*)0x400E0478U) /**< \brief (PMC) Fault Output Clear Register */ +#define REG_PMC_WPMR (*(RwReg*)0x400E04E4U) /**< \brief (PMC) Write Protect Mode Register */ +#define REG_PMC_WPSR (*(RoReg*)0x400E04E8U) /**< \brief (PMC) Write Protect Status Register */ +#define REG_PMC_PCER1 (*(WoReg*)0x400E0500U) /**< \brief (PMC) Peripheral Clock Enable Register 1 */ +#define REG_PMC_PCDR1 (*(WoReg*)0x400E0504U) /**< \brief (PMC) Peripheral Clock Disable Register 1 */ +#define REG_PMC_PCSR1 (*(RoReg*)0x400E0508U) /**< \brief (PMC) Peripheral Clock Status Register 1 */ +#define REG_PMC_OCR (*(RwReg*)0x400E0510U) /**< \brief (PMC) Oscillator Calibration Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_PMC_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_pwm.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_pwm.h new file mode 100644 index 0000000..d92fc34 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_pwm.h
@@ -0,0 +1,250 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_PWM_INSTANCE_ +#define _SAM4S_PWM_INSTANCE_ + +/* ========== Register definition for PWM peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_PWM_CLK (0x40020000U) /**< \brief (PWM) PWM Clock Register */ +#define REG_PWM_ENA (0x40020004U) /**< \brief (PWM) PWM Enable Register */ +#define REG_PWM_DIS (0x40020008U) /**< \brief (PWM) PWM Disable Register */ +#define REG_PWM_SR (0x4002000CU) /**< \brief (PWM) PWM Status Register */ +#define REG_PWM_IER1 (0x40020010U) /**< \brief (PWM) PWM Interrupt Enable Register 1 */ +#define REG_PWM_IDR1 (0x40020014U) /**< \brief (PWM) PWM Interrupt Disable Register 1 */ +#define REG_PWM_IMR1 (0x40020018U) /**< \brief (PWM) PWM Interrupt Mask Register 1 */ +#define REG_PWM_ISR1 (0x4002001CU) /**< \brief (PWM) PWM Interrupt Status Register 1 */ +#define REG_PWM_SCM (0x40020020U) /**< \brief (PWM) PWM Sync Channels Mode Register */ +#define REG_PWM_SCUC (0x40020028U) /**< \brief (PWM) PWM Sync Channels Update Control Register */ +#define REG_PWM_SCUP (0x4002002CU) /**< \brief (PWM) PWM Sync Channels Update Period Register */ +#define REG_PWM_SCUPUPD (0x40020030U) /**< \brief (PWM) PWM Sync Channels Update Period Update Register */ +#define REG_PWM_IER2 (0x40020034U) /**< \brief (PWM) PWM Interrupt Enable Register 2 */ +#define REG_PWM_IDR2 (0x40020038U) /**< \brief (PWM) PWM Interrupt Disable Register 2 */ +#define REG_PWM_IMR2 (0x4002003CU) /**< \brief (PWM) PWM Interrupt Mask Register 2 */ +#define REG_PWM_ISR2 (0x40020040U) /**< \brief (PWM) PWM Interrupt Status Register 2 */ +#define REG_PWM_OOV (0x40020044U) /**< \brief (PWM) PWM Output Override Value Register */ +#define REG_PWM_OS (0x40020048U) /**< \brief (PWM) PWM Output Selection Register */ +#define REG_PWM_OSS (0x4002004CU) /**< \brief (PWM) PWM Output Selection Set Register */ +#define REG_PWM_OSC (0x40020050U) /**< \brief (PWM) PWM Output Selection Clear Register */ +#define REG_PWM_OSSUPD (0x40020054U) /**< \brief (PWM) PWM Output Selection Set Update Register */ +#define REG_PWM_OSCUPD (0x40020058U) /**< \brief (PWM) PWM Output Selection Clear Update Register */ +#define REG_PWM_FMR (0x4002005CU) /**< \brief (PWM) PWM Fault Mode Register */ +#define REG_PWM_FSR (0x40020060U) /**< \brief (PWM) PWM Fault Status Register */ +#define REG_PWM_FCR (0x40020064U) /**< \brief (PWM) PWM Fault Clear Register */ +#define REG_PWM_FPV (0x40020068U) /**< \brief (PWM) PWM Fault Protection Value Register */ +#define REG_PWM_FPE (0x4002006CU) /**< \brief (PWM) PWM Fault Protection Enable Register */ +#define REG_PWM_ELMR (0x4002007CU) /**< \brief (PWM) PWM Event Line 0 Mode Register */ +#define REG_PWM_SMMR (0x400200B0U) /**< \brief (PWM) PWM Stepper Motor Mode Register */ +#define REG_PWM_WPCR (0x400200E4U) /**< \brief (PWM) PWM Write Protect Control Register */ +#define REG_PWM_WPSR (0x400200E8U) /**< \brief (PWM) PWM Write Protect Status Register */ +#define REG_PWM_TPR (0x40020108U) /**< \brief (PWM) Transmit Pointer Register */ +#define REG_PWM_TCR (0x4002010CU) /**< \brief (PWM) Transmit Counter Register */ +#define REG_PWM_TNPR (0x40020118U) /**< \brief (PWM) Transmit Next Pointer Register */ +#define REG_PWM_TNCR (0x4002011CU) /**< \brief (PWM) Transmit Next Counter Register */ +#define REG_PWM_PTCR (0x40020120U) /**< \brief (PWM) Transfer Control Register */ +#define REG_PWM_PTSR (0x40020124U) /**< \brief (PWM) Transfer Status Register */ +#define REG_PWM_CMPV0 (0x40020130U) /**< \brief (PWM) PWM Comparison 0 Value Register */ +#define REG_PWM_CMPVUPD0 (0x40020134U) /**< \brief (PWM) PWM Comparison 0 Value Update Register */ +#define REG_PWM_CMPM0 (0x40020138U) /**< \brief (PWM) PWM Comparison 0 Mode Register */ +#define REG_PWM_CMPMUPD0 (0x4002013CU) /**< \brief (PWM) PWM Comparison 0 Mode Update Register */ +#define REG_PWM_CMPV1 (0x40020140U) /**< \brief (PWM) PWM Comparison 1 Value Register */ +#define REG_PWM_CMPVUPD1 (0x40020144U) /**< \brief (PWM) PWM Comparison 1 Value Update Register */ +#define REG_PWM_CMPM1 (0x40020148U) /**< \brief (PWM) PWM Comparison 1 Mode Register */ +#define REG_PWM_CMPMUPD1 (0x4002014CU) /**< \brief (PWM) PWM Comparison 1 Mode Update Register */ +#define REG_PWM_CMPV2 (0x40020150U) /**< \brief (PWM) PWM Comparison 2 Value Register */ +#define REG_PWM_CMPVUPD2 (0x40020154U) /**< \brief (PWM) PWM Comparison 2 Value Update Register */ +#define REG_PWM_CMPM2 (0x40020158U) /**< \brief (PWM) PWM Comparison 2 Mode Register */ +#define REG_PWM_CMPMUPD2 (0x4002015CU) /**< \brief (PWM) PWM Comparison 2 Mode Update Register */ +#define REG_PWM_CMPV3 (0x40020160U) /**< \brief (PWM) PWM Comparison 3 Value Register */ +#define REG_PWM_CMPVUPD3 (0x40020164U) /**< \brief (PWM) PWM Comparison 3 Value Update Register */ +#define REG_PWM_CMPM3 (0x40020168U) /**< \brief (PWM) PWM Comparison 3 Mode Register */ +#define REG_PWM_CMPMUPD3 (0x4002016CU) /**< \brief (PWM) PWM Comparison 3 Mode Update Register */ +#define REG_PWM_CMPV4 (0x40020170U) /**< \brief (PWM) PWM Comparison 4 Value Register */ +#define REG_PWM_CMPVUPD4 (0x40020174U) /**< \brief (PWM) PWM Comparison 4 Value Update Register */ +#define REG_PWM_CMPM4 (0x40020178U) /**< \brief (PWM) PWM Comparison 4 Mode Register */ +#define REG_PWM_CMPMUPD4 (0x4002017CU) /**< \brief (PWM) PWM Comparison 4 Mode Update Register */ +#define REG_PWM_CMPV5 (0x40020180U) /**< \brief (PWM) PWM Comparison 5 Value Register */ +#define REG_PWM_CMPVUPD5 (0x40020184U) /**< \brief (PWM) PWM Comparison 5 Value Update Register */ +#define REG_PWM_CMPM5 (0x40020188U) /**< \brief (PWM) PWM Comparison 5 Mode Register */ +#define REG_PWM_CMPMUPD5 (0x4002018CU) /**< \brief (PWM) PWM Comparison 5 Mode Update Register */ +#define REG_PWM_CMPV6 (0x40020190U) /**< \brief (PWM) PWM Comparison 6 Value Register */ +#define REG_PWM_CMPVUPD6 (0x40020194U) /**< \brief (PWM) PWM Comparison 6 Value Update Register */ +#define REG_PWM_CMPM6 (0x40020198U) /**< \brief (PWM) PWM Comparison 6 Mode Register */ +#define REG_PWM_CMPMUPD6 (0x4002019CU) /**< \brief (PWM) PWM Comparison 6 Mode Update Register */ +#define REG_PWM_CMPV7 (0x400201A0U) /**< \brief (PWM) PWM Comparison 7 Value Register */ +#define REG_PWM_CMPVUPD7 (0x400201A4U) /**< \brief (PWM) PWM Comparison 7 Value Update Register */ +#define REG_PWM_CMPM7 (0x400201A8U) /**< \brief (PWM) PWM Comparison 7 Mode Register */ +#define REG_PWM_CMPMUPD7 (0x400201ACU) /**< \brief (PWM) PWM Comparison 7 Mode Update Register */ +#define REG_PWM_CMR0 (0x40020200U) /**< \brief (PWM) PWM Channel Mode Register (ch_num = 0) */ +#define REG_PWM_CDTY0 (0x40020204U) /**< \brief (PWM) PWM Channel Duty Cycle Register (ch_num = 0) */ +#define REG_PWM_CDTYUPD0 (0x40020208U) /**< \brief (PWM) PWM Channel Duty Cycle Update Register (ch_num = 0) */ +#define REG_PWM_CPRD0 (0x4002020CU) /**< \brief (PWM) PWM Channel Period Register (ch_num = 0) */ +#define REG_PWM_CPRDUPD0 (0x40020210U) /**< \brief (PWM) PWM Channel Period Update Register (ch_num = 0) */ +#define REG_PWM_CCNT0 (0x40020214U) /**< \brief (PWM) PWM Channel Counter Register (ch_num = 0) */ +#define REG_PWM_DT0 (0x40020218U) /**< \brief (PWM) PWM Channel Dead Time Register (ch_num = 0) */ +#define REG_PWM_DTUPD0 (0x4002021CU) /**< \brief (PWM) PWM Channel Dead Time Update Register (ch_num = 0) */ +#define REG_PWM_CMR1 (0x40020220U) /**< \brief (PWM) PWM Channel Mode Register (ch_num = 1) */ +#define REG_PWM_CDTY1 (0x40020224U) /**< \brief (PWM) PWM Channel Duty Cycle Register (ch_num = 1) */ +#define REG_PWM_CDTYUPD1 (0x40020228U) /**< \brief (PWM) PWM Channel Duty Cycle Update Register (ch_num = 1) */ +#define REG_PWM_CPRD1 (0x4002022CU) /**< \brief (PWM) PWM Channel Period Register (ch_num = 1) */ +#define REG_PWM_CPRDUPD1 (0x40020230U) /**< \brief (PWM) PWM Channel Period Update Register (ch_num = 1) */ +#define REG_PWM_CCNT1 (0x40020234U) /**< \brief (PWM) PWM Channel Counter Register (ch_num = 1) */ +#define REG_PWM_DT1 (0x40020238U) /**< \brief (PWM) PWM Channel Dead Time Register (ch_num = 1) */ +#define REG_PWM_DTUPD1 (0x4002023CU) /**< \brief (PWM) PWM Channel Dead Time Update Register (ch_num = 1) */ +#define REG_PWM_CMR2 (0x40020240U) /**< \brief (PWM) PWM Channel Mode Register (ch_num = 2) */ +#define REG_PWM_CDTY2 (0x40020244U) /**< \brief (PWM) PWM Channel Duty Cycle Register (ch_num = 2) */ +#define REG_PWM_CDTYUPD2 (0x40020248U) /**< \brief (PWM) PWM Channel Duty Cycle Update Register (ch_num = 2) */ +#define REG_PWM_CPRD2 (0x4002024CU) /**< \brief (PWM) PWM Channel Period Register (ch_num = 2) */ +#define REG_PWM_CPRDUPD2 (0x40020250U) /**< \brief (PWM) PWM Channel Period Update Register (ch_num = 2) */ +#define REG_PWM_CCNT2 (0x40020254U) /**< \brief (PWM) PWM Channel Counter Register (ch_num = 2) */ +#define REG_PWM_DT2 (0x40020258U) /**< \brief (PWM) PWM Channel Dead Time Register (ch_num = 2) */ +#define REG_PWM_DTUPD2 (0x4002025CU) /**< \brief (PWM) PWM Channel Dead Time Update Register (ch_num = 2) */ +#define REG_PWM_CMR3 (0x40020260U) /**< \brief (PWM) PWM Channel Mode Register (ch_num = 3) */ +#define REG_PWM_CDTY3 (0x40020264U) /**< \brief (PWM) PWM Channel Duty Cycle Register (ch_num = 3) */ +#define REG_PWM_CDTYUPD3 (0x40020268U) /**< \brief (PWM) PWM Channel Duty Cycle Update Register (ch_num = 3) */ +#define REG_PWM_CPRD3 (0x4002026CU) /**< \brief (PWM) PWM Channel Period Register (ch_num = 3) */ +#define REG_PWM_CPRDUPD3 (0x40020270U) /**< \brief (PWM) PWM Channel Period Update Register (ch_num = 3) */ +#define REG_PWM_CCNT3 (0x40020274U) /**< \brief (PWM) PWM Channel Counter Register (ch_num = 3) */ +#define REG_PWM_DT3 (0x40020278U) /**< \brief (PWM) PWM Channel Dead Time Register (ch_num = 3) */ +#define REG_PWM_DTUPD3 (0x4002027CU) /**< \brief (PWM) PWM Channel Dead Time Update Register (ch_num = 3) */ +#else +#define REG_PWM_CLK (*(RwReg*)0x40020000U) /**< \brief (PWM) PWM Clock Register */ +#define REG_PWM_ENA (*(WoReg*)0x40020004U) /**< \brief (PWM) PWM Enable Register */ +#define REG_PWM_DIS (*(WoReg*)0x40020008U) /**< \brief (PWM) PWM Disable Register */ +#define REG_PWM_SR (*(RoReg*)0x4002000CU) /**< \brief (PWM) PWM Status Register */ +#define REG_PWM_IER1 (*(WoReg*)0x40020010U) /**< \brief (PWM) PWM Interrupt Enable Register 1 */ +#define REG_PWM_IDR1 (*(WoReg*)0x40020014U) /**< \brief (PWM) PWM Interrupt Disable Register 1 */ +#define REG_PWM_IMR1 (*(RoReg*)0x40020018U) /**< \brief (PWM) PWM Interrupt Mask Register 1 */ +#define REG_PWM_ISR1 (*(RoReg*)0x4002001CU) /**< \brief (PWM) PWM Interrupt Status Register 1 */ +#define REG_PWM_SCM (*(RwReg*)0x40020020U) /**< \brief (PWM) PWM Sync Channels Mode Register */ +#define REG_PWM_SCUC (*(RwReg*)0x40020028U) /**< \brief (PWM) PWM Sync Channels Update Control Register */ +#define REG_PWM_SCUP (*(RwReg*)0x4002002CU) /**< \brief (PWM) PWM Sync Channels Update Period Register */ +#define REG_PWM_SCUPUPD (*(WoReg*)0x40020030U) /**< \brief (PWM) PWM Sync Channels Update Period Update Register */ +#define REG_PWM_IER2 (*(WoReg*)0x40020034U) /**< \brief (PWM) PWM Interrupt Enable Register 2 */ +#define REG_PWM_IDR2 (*(WoReg*)0x40020038U) /**< \brief (PWM) PWM Interrupt Disable Register 2 */ +#define REG_PWM_IMR2 (*(RoReg*)0x4002003CU) /**< \brief (PWM) PWM Interrupt Mask Register 2 */ +#define REG_PWM_ISR2 (*(RoReg*)0x40020040U) /**< \brief (PWM) PWM Interrupt Status Register 2 */ +#define REG_PWM_OOV (*(RwReg*)0x40020044U) /**< \brief (PWM) PWM Output Override Value Register */ +#define REG_PWM_OS (*(RwReg*)0x40020048U) /**< \brief (PWM) PWM Output Selection Register */ +#define REG_PWM_OSS (*(WoReg*)0x4002004CU) /**< \brief (PWM) PWM Output Selection Set Register */ +#define REG_PWM_OSC (*(WoReg*)0x40020050U) /**< \brief (PWM) PWM Output Selection Clear Register */ +#define REG_PWM_OSSUPD (*(WoReg*)0x40020054U) /**< \brief (PWM) PWM Output Selection Set Update Register */ +#define REG_PWM_OSCUPD (*(WoReg*)0x40020058U) /**< \brief (PWM) PWM Output Selection Clear Update Register */ +#define REG_PWM_FMR (*(RwReg*)0x4002005CU) /**< \brief (PWM) PWM Fault Mode Register */ +#define REG_PWM_FSR (*(RoReg*)0x40020060U) /**< \brief (PWM) PWM Fault Status Register */ +#define REG_PWM_FCR (*(WoReg*)0x40020064U) /**< \brief (PWM) PWM Fault Clear Register */ +#define REG_PWM_FPV (*(RwReg*)0x40020068U) /**< \brief (PWM) PWM Fault Protection Value Register */ +#define REG_PWM_FPE (*(RwReg*)0x4002006CU) /**< \brief (PWM) PWM Fault Protection Enable Register */ +#define REG_PWM_ELMR (*(RwReg*)0x4002007CU) /**< \brief (PWM) PWM Event Line 0 Mode Register */ +#define REG_PWM_SMMR (*(RwReg*)0x400200B0U) /**< \brief (PWM) PWM Stepper Motor Mode Register */ +#define REG_PWM_WPCR (*(WoReg*)0x400200E4U) /**< \brief (PWM) PWM Write Protect Control Register */ +#define REG_PWM_WPSR (*(RoReg*)0x400200E8U) /**< \brief (PWM) PWM Write Protect Status Register */ +#define REG_PWM_TPR (*(RwReg*)0x40020108U) /**< \brief (PWM) Transmit Pointer Register */ +#define REG_PWM_TCR (*(RwReg*)0x4002010CU) /**< \brief (PWM) Transmit Counter Register */ +#define REG_PWM_TNPR (*(RwReg*)0x40020118U) /**< \brief (PWM) Transmit Next Pointer Register */ +#define REG_PWM_TNCR (*(RwReg*)0x4002011CU) /**< \brief (PWM) Transmit Next Counter Register */ +#define REG_PWM_PTCR (*(WoReg*)0x40020120U) /**< \brief (PWM) Transfer Control Register */ +#define REG_PWM_PTSR (*(RoReg*)0x40020124U) /**< \brief (PWM) Transfer Status Register */ +#define REG_PWM_CMPV0 (*(RwReg*)0x40020130U) /**< \brief (PWM) PWM Comparison 0 Value Register */ +#define REG_PWM_CMPVUPD0 (*(WoReg*)0x40020134U) /**< \brief (PWM) PWM Comparison 0 Value Update Register */ +#define REG_PWM_CMPM0 (*(RwReg*)0x40020138U) /**< \brief (PWM) PWM Comparison 0 Mode Register */ +#define REG_PWM_CMPMUPD0 (*(WoReg*)0x4002013CU) /**< \brief (PWM) PWM Comparison 0 Mode Update Register */ +#define REG_PWM_CMPV1 (*(RwReg*)0x40020140U) /**< \brief (PWM) PWM Comparison 1 Value Register */ +#define REG_PWM_CMPVUPD1 (*(WoReg*)0x40020144U) /**< \brief (PWM) PWM Comparison 1 Value Update Register */ +#define REG_PWM_CMPM1 (*(RwReg*)0x40020148U) /**< \brief (PWM) PWM Comparison 1 Mode Register */ +#define REG_PWM_CMPMUPD1 (*(WoReg*)0x4002014CU) /**< \brief (PWM) PWM Comparison 1 Mode Update Register */ +#define REG_PWM_CMPV2 (*(RwReg*)0x40020150U) /**< \brief (PWM) PWM Comparison 2 Value Register */ +#define REG_PWM_CMPVUPD2 (*(WoReg*)0x40020154U) /**< \brief (PWM) PWM Comparison 2 Value Update Register */ +#define REG_PWM_CMPM2 (*(RwReg*)0x40020158U) /**< \brief (PWM) PWM Comparison 2 Mode Register */ +#define REG_PWM_CMPMUPD2 (*(WoReg*)0x4002015CU) /**< \brief (PWM) PWM Comparison 2 Mode Update Register */ +#define REG_PWM_CMPV3 (*(RwReg*)0x40020160U) /**< \brief (PWM) PWM Comparison 3 Value Register */ +#define REG_PWM_CMPVUPD3 (*(WoReg*)0x40020164U) /**< \brief (PWM) PWM Comparison 3 Value Update Register */ +#define REG_PWM_CMPM3 (*(RwReg*)0x40020168U) /**< \brief (PWM) PWM Comparison 3 Mode Register */ +#define REG_PWM_CMPMUPD3 (*(WoReg*)0x4002016CU) /**< \brief (PWM) PWM Comparison 3 Mode Update Register */ +#define REG_PWM_CMPV4 (*(RwReg*)0x40020170U) /**< \brief (PWM) PWM Comparison 4 Value Register */ +#define REG_PWM_CMPVUPD4 (*(WoReg*)0x40020174U) /**< \brief (PWM) PWM Comparison 4 Value Update Register */ +#define REG_PWM_CMPM4 (*(RwReg*)0x40020178U) /**< \brief (PWM) PWM Comparison 4 Mode Register */ +#define REG_PWM_CMPMUPD4 (*(WoReg*)0x4002017CU) /**< \brief (PWM) PWM Comparison 4 Mode Update Register */ +#define REG_PWM_CMPV5 (*(RwReg*)0x40020180U) /**< \brief (PWM) PWM Comparison 5 Value Register */ +#define REG_PWM_CMPVUPD5 (*(WoReg*)0x40020184U) /**< \brief (PWM) PWM Comparison 5 Value Update Register */ +#define REG_PWM_CMPM5 (*(RwReg*)0x40020188U) /**< \brief (PWM) PWM Comparison 5 Mode Register */ +#define REG_PWM_CMPMUPD5 (*(WoReg*)0x4002018CU) /**< \brief (PWM) PWM Comparison 5 Mode Update Register */ +#define REG_PWM_CMPV6 (*(RwReg*)0x40020190U) /**< \brief (PWM) PWM Comparison 6 Value Register */ +#define REG_PWM_CMPVUPD6 (*(WoReg*)0x40020194U) /**< \brief (PWM) PWM Comparison 6 Value Update Register */ +#define REG_PWM_CMPM6 (*(RwReg*)0x40020198U) /**< \brief (PWM) PWM Comparison 6 Mode Register */ +#define REG_PWM_CMPMUPD6 (*(WoReg*)0x4002019CU) /**< \brief (PWM) PWM Comparison 6 Mode Update Register */ +#define REG_PWM_CMPV7 (*(RwReg*)0x400201A0U) /**< \brief (PWM) PWM Comparison 7 Value Register */ +#define REG_PWM_CMPVUPD7 (*(WoReg*)0x400201A4U) /**< \brief (PWM) PWM Comparison 7 Value Update Register */ +#define REG_PWM_CMPM7 (*(RwReg*)0x400201A8U) /**< \brief (PWM) PWM Comparison 7 Mode Register */ +#define REG_PWM_CMPMUPD7 (*(WoReg*)0x400201ACU) /**< \brief (PWM) PWM Comparison 7 Mode Update Register */ +#define REG_PWM_CMR0 (*(RwReg*)0x40020200U) /**< \brief (PWM) PWM Channel Mode Register (ch_num = 0) */ +#define REG_PWM_CDTY0 (*(RwReg*)0x40020204U) /**< \brief (PWM) PWM Channel Duty Cycle Register (ch_num = 0) */ +#define REG_PWM_CDTYUPD0 (*(WoReg*)0x40020208U) /**< \brief (PWM) PWM Channel Duty Cycle Update Register (ch_num = 0) */ +#define REG_PWM_CPRD0 (*(RwReg*)0x4002020CU) /**< \brief (PWM) PWM Channel Period Register (ch_num = 0) */ +#define REG_PWM_CPRDUPD0 (*(WoReg*)0x40020210U) /**< \brief (PWM) PWM Channel Period Update Register (ch_num = 0) */ +#define REG_PWM_CCNT0 (*(RoReg*)0x40020214U) /**< \brief (PWM) PWM Channel Counter Register (ch_num = 0) */ +#define REG_PWM_DT0 (*(RwReg*)0x40020218U) /**< \brief (PWM) PWM Channel Dead Time Register (ch_num = 0) */ +#define REG_PWM_DTUPD0 (*(WoReg*)0x4002021CU) /**< \brief (PWM) PWM Channel Dead Time Update Register (ch_num = 0) */ +#define REG_PWM_CMR1 (*(RwReg*)0x40020220U) /**< \brief (PWM) PWM Channel Mode Register (ch_num = 1) */ +#define REG_PWM_CDTY1 (*(RwReg*)0x40020224U) /**< \brief (PWM) PWM Channel Duty Cycle Register (ch_num = 1) */ +#define REG_PWM_CDTYUPD1 (*(WoReg*)0x40020228U) /**< \brief (PWM) PWM Channel Duty Cycle Update Register (ch_num = 1) */ +#define REG_PWM_CPRD1 (*(RwReg*)0x4002022CU) /**< \brief (PWM) PWM Channel Period Register (ch_num = 1) */ +#define REG_PWM_CPRDUPD1 (*(WoReg*)0x40020230U) /**< \brief (PWM) PWM Channel Period Update Register (ch_num = 1) */ +#define REG_PWM_CCNT1 (*(RoReg*)0x40020234U) /**< \brief (PWM) PWM Channel Counter Register (ch_num = 1) */ +#define REG_PWM_DT1 (*(RwReg*)0x40020238U) /**< \brief (PWM) PWM Channel Dead Time Register (ch_num = 1) */ +#define REG_PWM_DTUPD1 (*(WoReg*)0x4002023CU) /**< \brief (PWM) PWM Channel Dead Time Update Register (ch_num = 1) */ +#define REG_PWM_CMR2 (*(RwReg*)0x40020240U) /**< \brief (PWM) PWM Channel Mode Register (ch_num = 2) */ +#define REG_PWM_CDTY2 (*(RwReg*)0x40020244U) /**< \brief (PWM) PWM Channel Duty Cycle Register (ch_num = 2) */ +#define REG_PWM_CDTYUPD2 (*(WoReg*)0x40020248U) /**< \brief (PWM) PWM Channel Duty Cycle Update Register (ch_num = 2) */ +#define REG_PWM_CPRD2 (*(RwReg*)0x4002024CU) /**< \brief (PWM) PWM Channel Period Register (ch_num = 2) */ +#define REG_PWM_CPRDUPD2 (*(WoReg*)0x40020250U) /**< \brief (PWM) PWM Channel Period Update Register (ch_num = 2) */ +#define REG_PWM_CCNT2 (*(RoReg*)0x40020254U) /**< \brief (PWM) PWM Channel Counter Register (ch_num = 2) */ +#define REG_PWM_DT2 (*(RwReg*)0x40020258U) /**< \brief (PWM) PWM Channel Dead Time Register (ch_num = 2) */ +#define REG_PWM_DTUPD2 (*(WoReg*)0x4002025CU) /**< \brief (PWM) PWM Channel Dead Time Update Register (ch_num = 2) */ +#define REG_PWM_CMR3 (*(RwReg*)0x40020260U) /**< \brief (PWM) PWM Channel Mode Register (ch_num = 3) */ +#define REG_PWM_CDTY3 (*(RwReg*)0x40020264U) /**< \brief (PWM) PWM Channel Duty Cycle Register (ch_num = 3) */ +#define REG_PWM_CDTYUPD3 (*(WoReg*)0x40020268U) /**< \brief (PWM) PWM Channel Duty Cycle Update Register (ch_num = 3) */ +#define REG_PWM_CPRD3 (*(RwReg*)0x4002026CU) /**< \brief (PWM) PWM Channel Period Register (ch_num = 3) */ +#define REG_PWM_CPRDUPD3 (*(WoReg*)0x40020270U) /**< \brief (PWM) PWM Channel Period Update Register (ch_num = 3) */ +#define REG_PWM_CCNT3 (*(RoReg*)0x40020274U) /**< \brief (PWM) PWM Channel Counter Register (ch_num = 3) */ +#define REG_PWM_DT3 (*(RwReg*)0x40020278U) /**< \brief (PWM) PWM Channel Dead Time Register (ch_num = 3) */ +#define REG_PWM_DTUPD3 (*(WoReg*)0x4002027CU) /**< \brief (PWM) PWM Channel Dead Time Update Register (ch_num = 3) */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_PWM_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_rstc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_rstc.h new file mode 100644 index 0000000..b57fbbf --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_rstc.h
@@ -0,0 +1,54 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_RSTC_INSTANCE_ +#define _SAM4S_RSTC_INSTANCE_ + +/* ========== Register definition for RSTC peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_RSTC_CR (0x400E1400U) /**< \brief (RSTC) Control Register */ +#define REG_RSTC_SR (0x400E1404U) /**< \brief (RSTC) Status Register */ +#define REG_RSTC_MR (0x400E1408U) /**< \brief (RSTC) Mode Register */ +#else +#define REG_RSTC_CR (*(WoReg*)0x400E1400U) /**< \brief (RSTC) Control Register */ +#define REG_RSTC_SR (*(RoReg*)0x400E1404U) /**< \brief (RSTC) Status Register */ +#define REG_RSTC_MR (*(RwReg*)0x400E1408U) /**< \brief (RSTC) Mode Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_RSTC_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_rtc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_rtc.h new file mode 100644 index 0000000..c397a90 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_rtc.h
@@ -0,0 +1,72 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_RTC_INSTANCE_ +#define _SAM4S_RTC_INSTANCE_ + +/* ========== Register definition for RTC peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_RTC_CR (0x400E1460U) /**< \brief (RTC) Control Register */ +#define REG_RTC_MR (0x400E1464U) /**< \brief (RTC) Mode Register */ +#define REG_RTC_TIMR (0x400E1468U) /**< \brief (RTC) Time Register */ +#define REG_RTC_CALR (0x400E146CU) /**< \brief (RTC) Calendar Register */ +#define REG_RTC_TIMALR (0x400E1470U) /**< \brief (RTC) Time Alarm Register */ +#define REG_RTC_CALALR (0x400E1474U) /**< \brief (RTC) Calendar Alarm Register */ +#define REG_RTC_SR (0x400E1478U) /**< \brief (RTC) Status Register */ +#define REG_RTC_SCCR (0x400E147CU) /**< \brief (RTC) Status Clear Command Register */ +#define REG_RTC_IER (0x400E1480U) /**< \brief (RTC) Interrupt Enable Register */ +#define REG_RTC_IDR (0x400E1484U) /**< \brief (RTC) Interrupt Disable Register */ +#define REG_RTC_IMR (0x400E1488U) /**< \brief (RTC) Interrupt Mask Register */ +#define REG_RTC_VER (0x400E148CU) /**< \brief (RTC) Valid Entry Register */ +#else +#define REG_RTC_CR (*(RwReg*)0x400E1460U) /**< \brief (RTC) Control Register */ +#define REG_RTC_MR (*(RwReg*)0x400E1464U) /**< \brief (RTC) Mode Register */ +#define REG_RTC_TIMR (*(RwReg*)0x400E1468U) /**< \brief (RTC) Time Register */ +#define REG_RTC_CALR (*(RwReg*)0x400E146CU) /**< \brief (RTC) Calendar Register */ +#define REG_RTC_TIMALR (*(RwReg*)0x400E1470U) /**< \brief (RTC) Time Alarm Register */ +#define REG_RTC_CALALR (*(RwReg*)0x400E1474U) /**< \brief (RTC) Calendar Alarm Register */ +#define REG_RTC_SR (*(RoReg*)0x400E1478U) /**< \brief (RTC) Status Register */ +#define REG_RTC_SCCR (*(WoReg*)0x400E147CU) /**< \brief (RTC) Status Clear Command Register */ +#define REG_RTC_IER (*(WoReg*)0x400E1480U) /**< \brief (RTC) Interrupt Enable Register */ +#define REG_RTC_IDR (*(WoReg*)0x400E1484U) /**< \brief (RTC) Interrupt Disable Register */ +#define REG_RTC_IMR (*(RoReg*)0x400E1488U) /**< \brief (RTC) Interrupt Mask Register */ +#define REG_RTC_VER (*(RoReg*)0x400E148CU) /**< \brief (RTC) Valid Entry Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_RTC_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_rtt.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_rtt.h new file mode 100644 index 0000000..962ca06 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_rtt.h
@@ -0,0 +1,56 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_RTT_INSTANCE_ +#define _SAM4S_RTT_INSTANCE_ + +/* ========== Register definition for RTT peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_RTT_MR (0x400E1430U) /**< \brief (RTT) Mode Register */ +#define REG_RTT_AR (0x400E1434U) /**< \brief (RTT) Alarm Register */ +#define REG_RTT_VR (0x400E1438U) /**< \brief (RTT) Value Register */ +#define REG_RTT_SR (0x400E143CU) /**< \brief (RTT) Status Register */ +#else +#define REG_RTT_MR (*(RwReg*)0x400E1430U) /**< \brief (RTT) Mode Register */ +#define REG_RTT_AR (*(RwReg*)0x400E1434U) /**< \brief (RTT) Alarm Register */ +#define REG_RTT_VR (*(RoReg*)0x400E1438U) /**< \brief (RTT) Value Register */ +#define REG_RTT_SR (*(RoReg*)0x400E143CU) /**< \brief (RTT) Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_RTT_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_smc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_smc.h new file mode 100644 index 0000000..cf7620b --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_smc.h
@@ -0,0 +1,98 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_SMC_INSTANCE_ +#define _SAM4S_SMC_INSTANCE_ + +/* ========== Register definition for SMC peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_SMC_SETUP0 (0x400E0000U) /**< \brief (SMC) SMC Setup Register (CS_number = 0) */ +#define REG_SMC_PULSE0 (0x400E0004U) /**< \brief (SMC) SMC Pulse Register (CS_number = 0) */ +#define REG_SMC_CYCLE0 (0x400E0008U) /**< \brief (SMC) SMC Cycle Register (CS_number = 0) */ +#define REG_SMC_MODE0 (0x400E000CU) /**< \brief (SMC) SMC Mode Register (CS_number = 0) */ +#define REG_SMC_SETUP1 (0x400E0010U) /**< \brief (SMC) SMC Setup Register (CS_number = 1) */ +#define REG_SMC_PULSE1 (0x400E0014U) /**< \brief (SMC) SMC Pulse Register (CS_number = 1) */ +#define REG_SMC_CYCLE1 (0x400E0018U) /**< \brief (SMC) SMC Cycle Register (CS_number = 1) */ +#define REG_SMC_MODE1 (0x400E001CU) /**< \brief (SMC) SMC Mode Register (CS_number = 1) */ +#define REG_SMC_SETUP2 (0x400E0020U) /**< \brief (SMC) SMC Setup Register (CS_number = 2) */ +#define REG_SMC_PULSE2 (0x400E0024U) /**< \brief (SMC) SMC Pulse Register (CS_number = 2) */ +#define REG_SMC_CYCLE2 (0x400E0028U) /**< \brief (SMC) SMC Cycle Register (CS_number = 2) */ +#define REG_SMC_MODE2 (0x400E002CU) /**< \brief (SMC) SMC Mode Register (CS_number = 2) */ +#define REG_SMC_SETUP3 (0x400E0030U) /**< \brief (SMC) SMC Setup Register (CS_number = 3) */ +#define REG_SMC_PULSE3 (0x400E0034U) /**< \brief (SMC) SMC Pulse Register (CS_number = 3) */ +#define REG_SMC_CYCLE3 (0x400E0038U) /**< \brief (SMC) SMC Cycle Register (CS_number = 3) */ +#define REG_SMC_MODE3 (0x400E003CU) /**< \brief (SMC) SMC Mode Register (CS_number = 3) */ +#define REG_SMC_SETUP4 (0x400E0040U) /**< \brief (SMC) SMC Setup Register (CS_number = 4) */ +#define REG_SMC_PULSE4 (0x400E0044U) /**< \brief (SMC) SMC Pulse Register (CS_number = 4) */ +#define REG_SMC_CYCLE4 (0x400E0048U) /**< \brief (SMC) SMC Cycle Register (CS_number = 4) */ +#define REG_SMC_MODE4 (0x400E004CU) /**< \brief (SMC) SMC Mode Register (CS_number = 4) */ +#define REG_SMC_OCMS (0x400E0080U) /**< \brief (SMC) SMC OCMS MODE Register */ +#define REG_SMC_KEY1 (0x400E0084U) /**< \brief (SMC) SMC OCMS KEY1 Register */ +#define REG_SMC_KEY2 (0x400E0088U) /**< \brief (SMC) SMC OCMS KEY2 Register */ +#define REG_SMC_WPMR (0x400E00E4U) /**< \brief (SMC) SMC Write Protect Mode Register */ +#define REG_SMC_WPSR (0x400E00E8U) /**< \brief (SMC) SMC Write Protect Status Register */ +#else +#define REG_SMC_SETUP0 (*(RwReg*)0x400E0000U) /**< \brief (SMC) SMC Setup Register (CS_number = 0) */ +#define REG_SMC_PULSE0 (*(RwReg*)0x400E0004U) /**< \brief (SMC) SMC Pulse Register (CS_number = 0) */ +#define REG_SMC_CYCLE0 (*(RwReg*)0x400E0008U) /**< \brief (SMC) SMC Cycle Register (CS_number = 0) */ +#define REG_SMC_MODE0 (*(RwReg*)0x400E000CU) /**< \brief (SMC) SMC Mode Register (CS_number = 0) */ +#define REG_SMC_SETUP1 (*(RwReg*)0x400E0010U) /**< \brief (SMC) SMC Setup Register (CS_number = 1) */ +#define REG_SMC_PULSE1 (*(RwReg*)0x400E0014U) /**< \brief (SMC) SMC Pulse Register (CS_number = 1) */ +#define REG_SMC_CYCLE1 (*(RwReg*)0x400E0018U) /**< \brief (SMC) SMC Cycle Register (CS_number = 1) */ +#define REG_SMC_MODE1 (*(RwReg*)0x400E001CU) /**< \brief (SMC) SMC Mode Register (CS_number = 1) */ +#define REG_SMC_SETUP2 (*(RwReg*)0x400E0020U) /**< \brief (SMC) SMC Setup Register (CS_number = 2) */ +#define REG_SMC_PULSE2 (*(RwReg*)0x400E0024U) /**< \brief (SMC) SMC Pulse Register (CS_number = 2) */ +#define REG_SMC_CYCLE2 (*(RwReg*)0x400E0028U) /**< \brief (SMC) SMC Cycle Register (CS_number = 2) */ +#define REG_SMC_MODE2 (*(RwReg*)0x400E002CU) /**< \brief (SMC) SMC Mode Register (CS_number = 2) */ +#define REG_SMC_SETUP3 (*(RwReg*)0x400E0030U) /**< \brief (SMC) SMC Setup Register (CS_number = 3) */ +#define REG_SMC_PULSE3 (*(RwReg*)0x400E0034U) /**< \brief (SMC) SMC Pulse Register (CS_number = 3) */ +#define REG_SMC_CYCLE3 (*(RwReg*)0x400E0038U) /**< \brief (SMC) SMC Cycle Register (CS_number = 3) */ +#define REG_SMC_MODE3 (*(RwReg*)0x400E003CU) /**< \brief (SMC) SMC Mode Register (CS_number = 3) */ +#define REG_SMC_SETUP4 (*(RwReg*)0x400E0040U) /**< \brief (SMC) SMC Setup Register (CS_number = 4) */ +#define REG_SMC_PULSE4 (*(RwReg*)0x400E0044U) /**< \brief (SMC) SMC Pulse Register (CS_number = 4) */ +#define REG_SMC_CYCLE4 (*(RwReg*)0x400E0048U) /**< \brief (SMC) SMC Cycle Register (CS_number = 4) */ +#define REG_SMC_MODE4 (*(RwReg*)0x400E004CU) /**< \brief (SMC) SMC Mode Register (CS_number = 4) */ +#define REG_SMC_OCMS (*(RwReg*)0x400E0080U) /**< \brief (SMC) SMC OCMS MODE Register */ +#define REG_SMC_KEY1 (*(WoReg*)0x400E0084U) /**< \brief (SMC) SMC OCMS KEY1 Register */ +#define REG_SMC_KEY2 (*(WoReg*)0x400E0088U) /**< \brief (SMC) SMC OCMS KEY2 Register */ +#define REG_SMC_WPMR (*(RwReg*)0x400E00E4U) /**< \brief (SMC) SMC Write Protect Mode Register */ +#define REG_SMC_WPSR (*(RoReg*)0x400E00E8U) /**< \brief (SMC) SMC Write Protect Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_SMC_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_spi.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_spi.h new file mode 100644 index 0000000..965d373 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_spi.h
@@ -0,0 +1,90 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_SPI_INSTANCE_ +#define _SAM4S_SPI_INSTANCE_ + +/* ========== Register definition for SPI peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_SPI_CR (0x40008000U) /**< \brief (SPI) Control Register */ +#define REG_SPI_MR (0x40008004U) /**< \brief (SPI) Mode Register */ +#define REG_SPI_RDR (0x40008008U) /**< \brief (SPI) Receive Data Register */ +#define REG_SPI_TDR (0x4000800CU) /**< \brief (SPI) Transmit Data Register */ +#define REG_SPI_SR (0x40008010U) /**< \brief (SPI) Status Register */ +#define REG_SPI_IER (0x40008014U) /**< \brief (SPI) Interrupt Enable Register */ +#define REG_SPI_IDR (0x40008018U) /**< \brief (SPI) Interrupt Disable Register */ +#define REG_SPI_IMR (0x4000801CU) /**< \brief (SPI) Interrupt Mask Register */ +#define REG_SPI_CSR (0x40008030U) /**< \brief (SPI) Chip Select Register */ +#define REG_SPI_WPMR (0x400080E4U) /**< \brief (SPI) Write Protection Control Register */ +#define REG_SPI_WPSR (0x400080E8U) /**< \brief (SPI) Write Protection Status Register */ +#define REG_SPI_RPR (0x40008100U) /**< \brief (SPI) Receive Pointer Register */ +#define REG_SPI_RCR (0x40008104U) /**< \brief (SPI) Receive Counter Register */ +#define REG_SPI_TPR (0x40008108U) /**< \brief (SPI) Transmit Pointer Register */ +#define REG_SPI_TCR (0x4000810CU) /**< \brief (SPI) Transmit Counter Register */ +#define REG_SPI_RNPR (0x40008110U) /**< \brief (SPI) Receive Next Pointer Register */ +#define REG_SPI_RNCR (0x40008114U) /**< \brief (SPI) Receive Next Counter Register */ +#define REG_SPI_TNPR (0x40008118U) /**< \brief (SPI) Transmit Next Pointer Register */ +#define REG_SPI_TNCR (0x4000811CU) /**< \brief (SPI) Transmit Next Counter Register */ +#define REG_SPI_PTCR (0x40008120U) /**< \brief (SPI) Transfer Control Register */ +#define REG_SPI_PTSR (0x40008124U) /**< \brief (SPI) Transfer Status Register */ +#else +#define REG_SPI_CR (*(WoReg*)0x40008000U) /**< \brief (SPI) Control Register */ +#define REG_SPI_MR (*(RwReg*)0x40008004U) /**< \brief (SPI) Mode Register */ +#define REG_SPI_RDR (*(RoReg*)0x40008008U) /**< \brief (SPI) Receive Data Register */ +#define REG_SPI_TDR (*(WoReg*)0x4000800CU) /**< \brief (SPI) Transmit Data Register */ +#define REG_SPI_SR (*(RoReg*)0x40008010U) /**< \brief (SPI) Status Register */ +#define REG_SPI_IER (*(WoReg*)0x40008014U) /**< \brief (SPI) Interrupt Enable Register */ +#define REG_SPI_IDR (*(WoReg*)0x40008018U) /**< \brief (SPI) Interrupt Disable Register */ +#define REG_SPI_IMR (*(RoReg*)0x4000801CU) /**< \brief (SPI) Interrupt Mask Register */ +#define REG_SPI_CSR (*(RwReg*)0x40008030U) /**< \brief (SPI) Chip Select Register */ +#define REG_SPI_WPMR (*(RwReg*)0x400080E4U) /**< \brief (SPI) Write Protection Control Register */ +#define REG_SPI_WPSR (*(RoReg*)0x400080E8U) /**< \brief (SPI) Write Protection Status Register */ +#define REG_SPI_RPR (*(RwReg*)0x40008100U) /**< \brief (SPI) Receive Pointer Register */ +#define REG_SPI_RCR (*(RwReg*)0x40008104U) /**< \brief (SPI) Receive Counter Register */ +#define REG_SPI_TPR (*(RwReg*)0x40008108U) /**< \brief (SPI) Transmit Pointer Register */ +#define REG_SPI_TCR (*(RwReg*)0x4000810CU) /**< \brief (SPI) Transmit Counter Register */ +#define REG_SPI_RNPR (*(RwReg*)0x40008110U) /**< \brief (SPI) Receive Next Pointer Register */ +#define REG_SPI_RNCR (*(RwReg*)0x40008114U) /**< \brief (SPI) Receive Next Counter Register */ +#define REG_SPI_TNPR (*(RwReg*)0x40008118U) /**< \brief (SPI) Transmit Next Pointer Register */ +#define REG_SPI_TNCR (*(RwReg*)0x4000811CU) /**< \brief (SPI) Transmit Next Counter Register */ +#define REG_SPI_PTCR (*(WoReg*)0x40008120U) /**< \brief (SPI) Transfer Control Register */ +#define REG_SPI_PTSR (*(RoReg*)0x40008124U) /**< \brief (SPI) Transfer Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_SPI_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_ssc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_ssc.h new file mode 100644 index 0000000..e528d59 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_ssc.h
@@ -0,0 +1,104 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_SSC_INSTANCE_ +#define _SAM4S_SSC_INSTANCE_ + +/* ========== Register definition for SSC peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_SSC_CR (0x40004000U) /**< \brief (SSC) Control Register */ +#define REG_SSC_CMR (0x40004004U) /**< \brief (SSC) Clock Mode Register */ +#define REG_SSC_RCMR (0x40004010U) /**< \brief (SSC) Receive Clock Mode Register */ +#define REG_SSC_RFMR (0x40004014U) /**< \brief (SSC) Receive Frame Mode Register */ +#define REG_SSC_TCMR (0x40004018U) /**< \brief (SSC) Transmit Clock Mode Register */ +#define REG_SSC_TFMR (0x4000401CU) /**< \brief (SSC) Transmit Frame Mode Register */ +#define REG_SSC_RHR (0x40004020U) /**< \brief (SSC) Receive Holding Register */ +#define REG_SSC_THR (0x40004024U) /**< \brief (SSC) Transmit Holding Register */ +#define REG_SSC_RSHR (0x40004030U) /**< \brief (SSC) Receive Sync. Holding Register */ +#define REG_SSC_TSHR (0x40004034U) /**< \brief (SSC) Transmit Sync. Holding Register */ +#define REG_SSC_RC0R (0x40004038U) /**< \brief (SSC) Receive Compare 0 Register */ +#define REG_SSC_RC1R (0x4000403CU) /**< \brief (SSC) Receive Compare 1 Register */ +#define REG_SSC_SR (0x40004040U) /**< \brief (SSC) Status Register */ +#define REG_SSC_IER (0x40004044U) /**< \brief (SSC) Interrupt Enable Register */ +#define REG_SSC_IDR (0x40004048U) /**< \brief (SSC) Interrupt Disable Register */ +#define REG_SSC_IMR (0x4000404CU) /**< \brief (SSC) Interrupt Mask Register */ +#define REG_SSC_WPMR (0x400040E4U) /**< \brief (SSC) Write Protect Mode Register */ +#define REG_SSC_WPSR (0x400040E8U) /**< \brief (SSC) Write Protect Status Register */ +#define REG_SSC_RPR (0x40004100U) /**< \brief (SSC) Receive Pointer Register */ +#define REG_SSC_RCR (0x40004104U) /**< \brief (SSC) Receive Counter Register */ +#define REG_SSC_TPR (0x40004108U) /**< \brief (SSC) Transmit Pointer Register */ +#define REG_SSC_TCR (0x4000410CU) /**< \brief (SSC) Transmit Counter Register */ +#define REG_SSC_RNPR (0x40004110U) /**< \brief (SSC) Receive Next Pointer Register */ +#define REG_SSC_RNCR (0x40004114U) /**< \brief (SSC) Receive Next Counter Register */ +#define REG_SSC_TNPR (0x40004118U) /**< \brief (SSC) Transmit Next Pointer Register */ +#define REG_SSC_TNCR (0x4000411CU) /**< \brief (SSC) Transmit Next Counter Register */ +#define REG_SSC_PTCR (0x40004120U) /**< \brief (SSC) Transfer Control Register */ +#define REG_SSC_PTSR (0x40004124U) /**< \brief (SSC) Transfer Status Register */ +#else +#define REG_SSC_CR (*(WoReg*)0x40004000U) /**< \brief (SSC) Control Register */ +#define REG_SSC_CMR (*(RwReg*)0x40004004U) /**< \brief (SSC) Clock Mode Register */ +#define REG_SSC_RCMR (*(RwReg*)0x40004010U) /**< \brief (SSC) Receive Clock Mode Register */ +#define REG_SSC_RFMR (*(RwReg*)0x40004014U) /**< \brief (SSC) Receive Frame Mode Register */ +#define REG_SSC_TCMR (*(RwReg*)0x40004018U) /**< \brief (SSC) Transmit Clock Mode Register */ +#define REG_SSC_TFMR (*(RwReg*)0x4000401CU) /**< \brief (SSC) Transmit Frame Mode Register */ +#define REG_SSC_RHR (*(RoReg*)0x40004020U) /**< \brief (SSC) Receive Holding Register */ +#define REG_SSC_THR (*(WoReg*)0x40004024U) /**< \brief (SSC) Transmit Holding Register */ +#define REG_SSC_RSHR (*(RoReg*)0x40004030U) /**< \brief (SSC) Receive Sync. Holding Register */ +#define REG_SSC_TSHR (*(RwReg*)0x40004034U) /**< \brief (SSC) Transmit Sync. Holding Register */ +#define REG_SSC_RC0R (*(RwReg*)0x40004038U) /**< \brief (SSC) Receive Compare 0 Register */ +#define REG_SSC_RC1R (*(RwReg*)0x4000403CU) /**< \brief (SSC) Receive Compare 1 Register */ +#define REG_SSC_SR (*(RoReg*)0x40004040U) /**< \brief (SSC) Status Register */ +#define REG_SSC_IER (*(WoReg*)0x40004044U) /**< \brief (SSC) Interrupt Enable Register */ +#define REG_SSC_IDR (*(WoReg*)0x40004048U) /**< \brief (SSC) Interrupt Disable Register */ +#define REG_SSC_IMR (*(RoReg*)0x4000404CU) /**< \brief (SSC) Interrupt Mask Register */ +#define REG_SSC_WPMR (*(RwReg*)0x400040E4U) /**< \brief (SSC) Write Protect Mode Register */ +#define REG_SSC_WPSR (*(RoReg*)0x400040E8U) /**< \brief (SSC) Write Protect Status Register */ +#define REG_SSC_RPR (*(RwReg*)0x40004100U) /**< \brief (SSC) Receive Pointer Register */ +#define REG_SSC_RCR (*(RwReg*)0x40004104U) /**< \brief (SSC) Receive Counter Register */ +#define REG_SSC_TPR (*(RwReg*)0x40004108U) /**< \brief (SSC) Transmit Pointer Register */ +#define REG_SSC_TCR (*(RwReg*)0x4000410CU) /**< \brief (SSC) Transmit Counter Register */ +#define REG_SSC_RNPR (*(RwReg*)0x40004110U) /**< \brief (SSC) Receive Next Pointer Register */ +#define REG_SSC_RNCR (*(RwReg*)0x40004114U) /**< \brief (SSC) Receive Next Counter Register */ +#define REG_SSC_TNPR (*(RwReg*)0x40004118U) /**< \brief (SSC) Transmit Next Pointer Register */ +#define REG_SSC_TNCR (*(RwReg*)0x4000411CU) /**< \brief (SSC) Transmit Next Counter Register */ +#define REG_SSC_PTCR (*(WoReg*)0x40004120U) /**< \brief (SSC) Transfer Control Register */ +#define REG_SSC_PTSR (*(RoReg*)0x40004124U) /**< \brief (SSC) Transfer Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_SSC_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_supc.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_supc.h new file mode 100644 index 0000000..09b882b --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_supc.h
@@ -0,0 +1,60 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_SUPC_INSTANCE_ +#define _SAM4S_SUPC_INSTANCE_ + +/* ========== Register definition for SUPC peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_SUPC_CR (0x400E1410U) /**< \brief (SUPC) Supply Controller Control Register */ +#define REG_SUPC_SMMR (0x400E1414U) /**< \brief (SUPC) Supply Controller Supply Monitor Mode Register */ +#define REG_SUPC_MR (0x400E1418U) /**< \brief (SUPC) Supply Controller Mode Register */ +#define REG_SUPC_WUMR (0x400E141CU) /**< \brief (SUPC) Supply Controller Wake Up Mode Register */ +#define REG_SUPC_WUIR (0x400E1420U) /**< \brief (SUPC) Supply Controller Wake Up Inputs Register */ +#define REG_SUPC_SR (0x400E1424U) /**< \brief (SUPC) Supply Controller Status Register */ +#else +#define REG_SUPC_CR (*(WoReg*)0x400E1410U) /**< \brief (SUPC) Supply Controller Control Register */ +#define REG_SUPC_SMMR (*(RwReg*)0x400E1414U) /**< \brief (SUPC) Supply Controller Supply Monitor Mode Register */ +#define REG_SUPC_MR (*(RwReg*)0x400E1418U) /**< \brief (SUPC) Supply Controller Mode Register */ +#define REG_SUPC_WUMR (*(RwReg*)0x400E141CU) /**< \brief (SUPC) Supply Controller Wake Up Mode Register */ +#define REG_SUPC_WUIR (*(RwReg*)0x400E1420U) /**< \brief (SUPC) Supply Controller Wake Up Inputs Register */ +#define REG_SUPC_SR (*(RoReg*)0x400E1424U) /**< \brief (SUPC) Supply Controller Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_SUPC_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_tc0.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_tc0.h new file mode 100644 index 0000000..bc96383 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_tc0.h
@@ -0,0 +1,130 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_TC0_INSTANCE_ +#define _SAM4S_TC0_INSTANCE_ + +/* ========== Register definition for TC0 peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_TC0_CCR0 (0x40010000U) /**< \brief (TC0) Channel Control Register (channel = 0) */ +#define REG_TC0_CMR0 (0x40010004U) /**< \brief (TC0) Channel Mode Register (channel = 0) */ +#define REG_TC0_SMMR0 (0x40010008U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 0) */ +#define REG_TC0_CV0 (0x40010010U) /**< \brief (TC0) Counter Value (channel = 0) */ +#define REG_TC0_RA0 (0x40010014U) /**< \brief (TC0) Register A (channel = 0) */ +#define REG_TC0_RB0 (0x40010018U) /**< \brief (TC0) Register B (channel = 0) */ +#define REG_TC0_RC0 (0x4001001CU) /**< \brief (TC0) Register C (channel = 0) */ +#define REG_TC0_SR0 (0x40010020U) /**< \brief (TC0) Status Register (channel = 0) */ +#define REG_TC0_IER0 (0x40010024U) /**< \brief (TC0) Interrupt Enable Register (channel = 0) */ +#define REG_TC0_IDR0 (0x40010028U) /**< \brief (TC0) Interrupt Disable Register (channel = 0) */ +#define REG_TC0_IMR0 (0x4001002CU) /**< \brief (TC0) Interrupt Mask Register (channel = 0) */ +#define REG_TC0_CCR1 (0x40010040U) /**< \brief (TC0) Channel Control Register (channel = 1) */ +#define REG_TC0_CMR1 (0x40010044U) /**< \brief (TC0) Channel Mode Register (channel = 1) */ +#define REG_TC0_SMMR1 (0x40010048U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 1) */ +#define REG_TC0_CV1 (0x40010050U) /**< \brief (TC0) Counter Value (channel = 1) */ +#define REG_TC0_RA1 (0x40010054U) /**< \brief (TC0) Register A (channel = 1) */ +#define REG_TC0_RB1 (0x40010058U) /**< \brief (TC0) Register B (channel = 1) */ +#define REG_TC0_RC1 (0x4001005CU) /**< \brief (TC0) Register C (channel = 1) */ +#define REG_TC0_SR1 (0x40010060U) /**< \brief (TC0) Status Register (channel = 1) */ +#define REG_TC0_IER1 (0x40010064U) /**< \brief (TC0) Interrupt Enable Register (channel = 1) */ +#define REG_TC0_IDR1 (0x40010068U) /**< \brief (TC0) Interrupt Disable Register (channel = 1) */ +#define REG_TC0_IMR1 (0x4001006CU) /**< \brief (TC0) Interrupt Mask Register (channel = 1) */ +#define REG_TC0_CCR2 (0x40010080U) /**< \brief (TC0) Channel Control Register (channel = 2) */ +#define REG_TC0_CMR2 (0x40010084U) /**< \brief (TC0) Channel Mode Register (channel = 2) */ +#define REG_TC0_SMMR2 (0x40010088U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 2) */ +#define REG_TC0_CV2 (0x40010090U) /**< \brief (TC0) Counter Value (channel = 2) */ +#define REG_TC0_RA2 (0x40010094U) /**< \brief (TC0) Register A (channel = 2) */ +#define REG_TC0_RB2 (0x40010098U) /**< \brief (TC0) Register B (channel = 2) */ +#define REG_TC0_RC2 (0x4001009CU) /**< \brief (TC0) Register C (channel = 2) */ +#define REG_TC0_SR2 (0x400100A0U) /**< \brief (TC0) Status Register (channel = 2) */ +#define REG_TC0_IER2 (0x400100A4U) /**< \brief (TC0) Interrupt Enable Register (channel = 2) */ +#define REG_TC0_IDR2 (0x400100A8U) /**< \brief (TC0) Interrupt Disable Register (channel = 2) */ +#define REG_TC0_IMR2 (0x400100ACU) /**< \brief (TC0) Interrupt Mask Register (channel = 2) */ +#define REG_TC0_BCR (0x400100C0U) /**< \brief (TC0) Block Control Register */ +#define REG_TC0_BMR (0x400100C4U) /**< \brief (TC0) Block Mode Register */ +#define REG_TC0_QIER (0x400100C8U) /**< \brief (TC0) QDEC Interrupt Enable Register */ +#define REG_TC0_QIDR (0x400100CCU) /**< \brief (TC0) QDEC Interrupt Disable Register */ +#define REG_TC0_QIMR (0x400100D0U) /**< \brief (TC0) QDEC Interrupt Mask Register */ +#define REG_TC0_QISR (0x400100D4U) /**< \brief (TC0) QDEC Interrupt Status Register */ +#define REG_TC0_FMR (0x400100D8U) /**< \brief (TC0) Fault Mode Register */ +#define REG_TC0_WPMR (0x400100E4U) /**< \brief (TC0) Write Protect Mode Register */ +#else +#define REG_TC0_CCR0 (*(WoReg*)0x40010000U) /**< \brief (TC0) Channel Control Register (channel = 0) */ +#define REG_TC0_CMR0 (*(RwReg*)0x40010004U) /**< \brief (TC0) Channel Mode Register (channel = 0) */ +#define REG_TC0_SMMR0 (*(RwReg*)0x40010008U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 0) */ +#define REG_TC0_CV0 (*(RoReg*)0x40010010U) /**< \brief (TC0) Counter Value (channel = 0) */ +#define REG_TC0_RA0 (*(RwReg*)0x40010014U) /**< \brief (TC0) Register A (channel = 0) */ +#define REG_TC0_RB0 (*(RwReg*)0x40010018U) /**< \brief (TC0) Register B (channel = 0) */ +#define REG_TC0_RC0 (*(RwReg*)0x4001001CU) /**< \brief (TC0) Register C (channel = 0) */ +#define REG_TC0_SR0 (*(RoReg*)0x40010020U) /**< \brief (TC0) Status Register (channel = 0) */ +#define REG_TC0_IER0 (*(WoReg*)0x40010024U) /**< \brief (TC0) Interrupt Enable Register (channel = 0) */ +#define REG_TC0_IDR0 (*(WoReg*)0x40010028U) /**< \brief (TC0) Interrupt Disable Register (channel = 0) */ +#define REG_TC0_IMR0 (*(RoReg*)0x4001002CU) /**< \brief (TC0) Interrupt Mask Register (channel = 0) */ +#define REG_TC0_CCR1 (*(WoReg*)0x40010040U) /**< \brief (TC0) Channel Control Register (channel = 1) */ +#define REG_TC0_CMR1 (*(RwReg*)0x40010044U) /**< \brief (TC0) Channel Mode Register (channel = 1) */ +#define REG_TC0_SMMR1 (*(RwReg*)0x40010048U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 1) */ +#define REG_TC0_CV1 (*(RoReg*)0x40010050U) /**< \brief (TC0) Counter Value (channel = 1) */ +#define REG_TC0_RA1 (*(RwReg*)0x40010054U) /**< \brief (TC0) Register A (channel = 1) */ +#define REG_TC0_RB1 (*(RwReg*)0x40010058U) /**< \brief (TC0) Register B (channel = 1) */ +#define REG_TC0_RC1 (*(RwReg*)0x4001005CU) /**< \brief (TC0) Register C (channel = 1) */ +#define REG_TC0_SR1 (*(RoReg*)0x40010060U) /**< \brief (TC0) Status Register (channel = 1) */ +#define REG_TC0_IER1 (*(WoReg*)0x40010064U) /**< \brief (TC0) Interrupt Enable Register (channel = 1) */ +#define REG_TC0_IDR1 (*(WoReg*)0x40010068U) /**< \brief (TC0) Interrupt Disable Register (channel = 1) */ +#define REG_TC0_IMR1 (*(RoReg*)0x4001006CU) /**< \brief (TC0) Interrupt Mask Register (channel = 1) */ +#define REG_TC0_CCR2 (*(WoReg*)0x40010080U) /**< \brief (TC0) Channel Control Register (channel = 2) */ +#define REG_TC0_CMR2 (*(RwReg*)0x40010084U) /**< \brief (TC0) Channel Mode Register (channel = 2) */ +#define REG_TC0_SMMR2 (*(RwReg*)0x40010088U) /**< \brief (TC0) Stepper Motor Mode Register (channel = 2) */ +#define REG_TC0_CV2 (*(RoReg*)0x40010090U) /**< \brief (TC0) Counter Value (channel = 2) */ +#define REG_TC0_RA2 (*(RwReg*)0x40010094U) /**< \brief (TC0) Register A (channel = 2) */ +#define REG_TC0_RB2 (*(RwReg*)0x40010098U) /**< \brief (TC0) Register B (channel = 2) */ +#define REG_TC0_RC2 (*(RwReg*)0x4001009CU) /**< \brief (TC0) Register C (channel = 2) */ +#define REG_TC0_SR2 (*(RoReg*)0x400100A0U) /**< \brief (TC0) Status Register (channel = 2) */ +#define REG_TC0_IER2 (*(WoReg*)0x400100A4U) /**< \brief (TC0) Interrupt Enable Register (channel = 2) */ +#define REG_TC0_IDR2 (*(WoReg*)0x400100A8U) /**< \brief (TC0) Interrupt Disable Register (channel = 2) */ +#define REG_TC0_IMR2 (*(RoReg*)0x400100ACU) /**< \brief (TC0) Interrupt Mask Register (channel = 2) */ +#define REG_TC0_BCR (*(WoReg*)0x400100C0U) /**< \brief (TC0) Block Control Register */ +#define REG_TC0_BMR (*(RwReg*)0x400100C4U) /**< \brief (TC0) Block Mode Register */ +#define REG_TC0_QIER (*(WoReg*)0x400100C8U) /**< \brief (TC0) QDEC Interrupt Enable Register */ +#define REG_TC0_QIDR (*(WoReg*)0x400100CCU) /**< \brief (TC0) QDEC Interrupt Disable Register */ +#define REG_TC0_QIMR (*(RoReg*)0x400100D0U) /**< \brief (TC0) QDEC Interrupt Mask Register */ +#define REG_TC0_QISR (*(RoReg*)0x400100D4U) /**< \brief (TC0) QDEC Interrupt Status Register */ +#define REG_TC0_FMR (*(RwReg*)0x400100D8U) /**< \brief (TC0) Fault Mode Register */ +#define REG_TC0_WPMR (*(RwReg*)0x400100E4U) /**< \brief (TC0) Write Protect Mode Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_TC0_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_tc1.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_tc1.h new file mode 100644 index 0000000..f3c527d --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_tc1.h
@@ -0,0 +1,130 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_TC1_INSTANCE_ +#define _SAM4S_TC1_INSTANCE_ + +/* ========== Register definition for TC1 peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_TC1_CCR0 (0x40014000U) /**< \brief (TC1) Channel Control Register (channel = 0) */ +#define REG_TC1_CMR0 (0x40014004U) /**< \brief (TC1) Channel Mode Register (channel = 0) */ +#define REG_TC1_SMMR0 (0x40014008U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 0) */ +#define REG_TC1_CV0 (0x40014010U) /**< \brief (TC1) Counter Value (channel = 0) */ +#define REG_TC1_RA0 (0x40014014U) /**< \brief (TC1) Register A (channel = 0) */ +#define REG_TC1_RB0 (0x40014018U) /**< \brief (TC1) Register B (channel = 0) */ +#define REG_TC1_RC0 (0x4001401CU) /**< \brief (TC1) Register C (channel = 0) */ +#define REG_TC1_SR0 (0x40014020U) /**< \brief (TC1) Status Register (channel = 0) */ +#define REG_TC1_IER0 (0x40014024U) /**< \brief (TC1) Interrupt Enable Register (channel = 0) */ +#define REG_TC1_IDR0 (0x40014028U) /**< \brief (TC1) Interrupt Disable Register (channel = 0) */ +#define REG_TC1_IMR0 (0x4001402CU) /**< \brief (TC1) Interrupt Mask Register (channel = 0) */ +#define REG_TC1_CCR1 (0x40014040U) /**< \brief (TC1) Channel Control Register (channel = 1) */ +#define REG_TC1_CMR1 (0x40014044U) /**< \brief (TC1) Channel Mode Register (channel = 1) */ +#define REG_TC1_SMMR1 (0x40014048U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 1) */ +#define REG_TC1_CV1 (0x40014050U) /**< \brief (TC1) Counter Value (channel = 1) */ +#define REG_TC1_RA1 (0x40014054U) /**< \brief (TC1) Register A (channel = 1) */ +#define REG_TC1_RB1 (0x40014058U) /**< \brief (TC1) Register B (channel = 1) */ +#define REG_TC1_RC1 (0x4001405CU) /**< \brief (TC1) Register C (channel = 1) */ +#define REG_TC1_SR1 (0x40014060U) /**< \brief (TC1) Status Register (channel = 1) */ +#define REG_TC1_IER1 (0x40014064U) /**< \brief (TC1) Interrupt Enable Register (channel = 1) */ +#define REG_TC1_IDR1 (0x40014068U) /**< \brief (TC1) Interrupt Disable Register (channel = 1) */ +#define REG_TC1_IMR1 (0x4001406CU) /**< \brief (TC1) Interrupt Mask Register (channel = 1) */ +#define REG_TC1_CCR2 (0x40014080U) /**< \brief (TC1) Channel Control Register (channel = 2) */ +#define REG_TC1_CMR2 (0x40014084U) /**< \brief (TC1) Channel Mode Register (channel = 2) */ +#define REG_TC1_SMMR2 (0x40014088U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 2) */ +#define REG_TC1_CV2 (0x40014090U) /**< \brief (TC1) Counter Value (channel = 2) */ +#define REG_TC1_RA2 (0x40014094U) /**< \brief (TC1) Register A (channel = 2) */ +#define REG_TC1_RB2 (0x40014098U) /**< \brief (TC1) Register B (channel = 2) */ +#define REG_TC1_RC2 (0x4001409CU) /**< \brief (TC1) Register C (channel = 2) */ +#define REG_TC1_SR2 (0x400140A0U) /**< \brief (TC1) Status Register (channel = 2) */ +#define REG_TC1_IER2 (0x400140A4U) /**< \brief (TC1) Interrupt Enable Register (channel = 2) */ +#define REG_TC1_IDR2 (0x400140A8U) /**< \brief (TC1) Interrupt Disable Register (channel = 2) */ +#define REG_TC1_IMR2 (0x400140ACU) /**< \brief (TC1) Interrupt Mask Register (channel = 2) */ +#define REG_TC1_BCR (0x400140C0U) /**< \brief (TC1) Block Control Register */ +#define REG_TC1_BMR (0x400140C4U) /**< \brief (TC1) Block Mode Register */ +#define REG_TC1_QIER (0x400140C8U) /**< \brief (TC1) QDEC Interrupt Enable Register */ +#define REG_TC1_QIDR (0x400140CCU) /**< \brief (TC1) QDEC Interrupt Disable Register */ +#define REG_TC1_QIMR (0x400140D0U) /**< \brief (TC1) QDEC Interrupt Mask Register */ +#define REG_TC1_QISR (0x400140D4U) /**< \brief (TC1) QDEC Interrupt Status Register */ +#define REG_TC1_FMR (0x400140D8U) /**< \brief (TC1) Fault Mode Register */ +#define REG_TC1_WPMR (0x400140E4U) /**< \brief (TC1) Write Protect Mode Register */ +#else +#define REG_TC1_CCR0 (*(WoReg*)0x40014000U) /**< \brief (TC1) Channel Control Register (channel = 0) */ +#define REG_TC1_CMR0 (*(RwReg*)0x40014004U) /**< \brief (TC1) Channel Mode Register (channel = 0) */ +#define REG_TC1_SMMR0 (*(RwReg*)0x40014008U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 0) */ +#define REG_TC1_CV0 (*(RoReg*)0x40014010U) /**< \brief (TC1) Counter Value (channel = 0) */ +#define REG_TC1_RA0 (*(RwReg*)0x40014014U) /**< \brief (TC1) Register A (channel = 0) */ +#define REG_TC1_RB0 (*(RwReg*)0x40014018U) /**< \brief (TC1) Register B (channel = 0) */ +#define REG_TC1_RC0 (*(RwReg*)0x4001401CU) /**< \brief (TC1) Register C (channel = 0) */ +#define REG_TC1_SR0 (*(RoReg*)0x40014020U) /**< \brief (TC1) Status Register (channel = 0) */ +#define REG_TC1_IER0 (*(WoReg*)0x40014024U) /**< \brief (TC1) Interrupt Enable Register (channel = 0) */ +#define REG_TC1_IDR0 (*(WoReg*)0x40014028U) /**< \brief (TC1) Interrupt Disable Register (channel = 0) */ +#define REG_TC1_IMR0 (*(RoReg*)0x4001402CU) /**< \brief (TC1) Interrupt Mask Register (channel = 0) */ +#define REG_TC1_CCR1 (*(WoReg*)0x40014040U) /**< \brief (TC1) Channel Control Register (channel = 1) */ +#define REG_TC1_CMR1 (*(RwReg*)0x40014044U) /**< \brief (TC1) Channel Mode Register (channel = 1) */ +#define REG_TC1_SMMR1 (*(RwReg*)0x40014048U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 1) */ +#define REG_TC1_CV1 (*(RoReg*)0x40014050U) /**< \brief (TC1) Counter Value (channel = 1) */ +#define REG_TC1_RA1 (*(RwReg*)0x40014054U) /**< \brief (TC1) Register A (channel = 1) */ +#define REG_TC1_RB1 (*(RwReg*)0x40014058U) /**< \brief (TC1) Register B (channel = 1) */ +#define REG_TC1_RC1 (*(RwReg*)0x4001405CU) /**< \brief (TC1) Register C (channel = 1) */ +#define REG_TC1_SR1 (*(RoReg*)0x40014060U) /**< \brief (TC1) Status Register (channel = 1) */ +#define REG_TC1_IER1 (*(WoReg*)0x40014064U) /**< \brief (TC1) Interrupt Enable Register (channel = 1) */ +#define REG_TC1_IDR1 (*(WoReg*)0x40014068U) /**< \brief (TC1) Interrupt Disable Register (channel = 1) */ +#define REG_TC1_IMR1 (*(RoReg*)0x4001406CU) /**< \brief (TC1) Interrupt Mask Register (channel = 1) */ +#define REG_TC1_CCR2 (*(WoReg*)0x40014080U) /**< \brief (TC1) Channel Control Register (channel = 2) */ +#define REG_TC1_CMR2 (*(RwReg*)0x40014084U) /**< \brief (TC1) Channel Mode Register (channel = 2) */ +#define REG_TC1_SMMR2 (*(RwReg*)0x40014088U) /**< \brief (TC1) Stepper Motor Mode Register (channel = 2) */ +#define REG_TC1_CV2 (*(RoReg*)0x40014090U) /**< \brief (TC1) Counter Value (channel = 2) */ +#define REG_TC1_RA2 (*(RwReg*)0x40014094U) /**< \brief (TC1) Register A (channel = 2) */ +#define REG_TC1_RB2 (*(RwReg*)0x40014098U) /**< \brief (TC1) Register B (channel = 2) */ +#define REG_TC1_RC2 (*(RwReg*)0x4001409CU) /**< \brief (TC1) Register C (channel = 2) */ +#define REG_TC1_SR2 (*(RoReg*)0x400140A0U) /**< \brief (TC1) Status Register (channel = 2) */ +#define REG_TC1_IER2 (*(WoReg*)0x400140A4U) /**< \brief (TC1) Interrupt Enable Register (channel = 2) */ +#define REG_TC1_IDR2 (*(WoReg*)0x400140A8U) /**< \brief (TC1) Interrupt Disable Register (channel = 2) */ +#define REG_TC1_IMR2 (*(RoReg*)0x400140ACU) /**< \brief (TC1) Interrupt Mask Register (channel = 2) */ +#define REG_TC1_BCR (*(WoReg*)0x400140C0U) /**< \brief (TC1) Block Control Register */ +#define REG_TC1_BMR (*(RwReg*)0x400140C4U) /**< \brief (TC1) Block Mode Register */ +#define REG_TC1_QIER (*(WoReg*)0x400140C8U) /**< \brief (TC1) QDEC Interrupt Enable Register */ +#define REG_TC1_QIDR (*(WoReg*)0x400140CCU) /**< \brief (TC1) QDEC Interrupt Disable Register */ +#define REG_TC1_QIMR (*(RoReg*)0x400140D0U) /**< \brief (TC1) QDEC Interrupt Mask Register */ +#define REG_TC1_QISR (*(RoReg*)0x400140D4U) /**< \brief (TC1) QDEC Interrupt Status Register */ +#define REG_TC1_FMR (*(RwReg*)0x400140D8U) /**< \brief (TC1) Fault Mode Register */ +#define REG_TC1_WPMR (*(RwReg*)0x400140E4U) /**< \brief (TC1) Write Protect Mode Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_TC1_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_twi0.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_twi0.h new file mode 100644 index 0000000..49777ab --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_twi0.h
@@ -0,0 +1,90 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_TWI0_INSTANCE_ +#define _SAM4S_TWI0_INSTANCE_ + +/* ========== Register definition for TWI0 peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_TWI0_CR (0x40018000U) /**< \brief (TWI0) Control Register */ +#define REG_TWI0_MMR (0x40018004U) /**< \brief (TWI0) Master Mode Register */ +#define REG_TWI0_SMR (0x40018008U) /**< \brief (TWI0) Slave Mode Register */ +#define REG_TWI0_IADR (0x4001800CU) /**< \brief (TWI0) Internal Address Register */ +#define REG_TWI0_CWGR (0x40018010U) /**< \brief (TWI0) Clock Waveform Generator Register */ +#define REG_TWI0_SR (0x40018020U) /**< \brief (TWI0) Status Register */ +#define REG_TWI0_IER (0x40018024U) /**< \brief (TWI0) Interrupt Enable Register */ +#define REG_TWI0_IDR (0x40018028U) /**< \brief (TWI0) Interrupt Disable Register */ +#define REG_TWI0_IMR (0x4001802CU) /**< \brief (TWI0) Interrupt Mask Register */ +#define REG_TWI0_RHR (0x40018030U) /**< \brief (TWI0) Receive Holding Register */ +#define REG_TWI0_THR (0x40018034U) /**< \brief (TWI0) Transmit Holding Register */ +#define REG_TWI0_RPR (0x40018100U) /**< \brief (TWI0) Receive Pointer Register */ +#define REG_TWI0_RCR (0x40018104U) /**< \brief (TWI0) Receive Counter Register */ +#define REG_TWI0_TPR (0x40018108U) /**< \brief (TWI0) Transmit Pointer Register */ +#define REG_TWI0_TCR (0x4001810CU) /**< \brief (TWI0) Transmit Counter Register */ +#define REG_TWI0_RNPR (0x40018110U) /**< \brief (TWI0) Receive Next Pointer Register */ +#define REG_TWI0_RNCR (0x40018114U) /**< \brief (TWI0) Receive Next Counter Register */ +#define REG_TWI0_TNPR (0x40018118U) /**< \brief (TWI0) Transmit Next Pointer Register */ +#define REG_TWI0_TNCR (0x4001811CU) /**< \brief (TWI0) Transmit Next Counter Register */ +#define REG_TWI0_PTCR (0x40018120U) /**< \brief (TWI0) Transfer Control Register */ +#define REG_TWI0_PTSR (0x40018124U) /**< \brief (TWI0) Transfer Status Register */ +#else +#define REG_TWI0_CR (*(WoReg*)0x40018000U) /**< \brief (TWI0) Control Register */ +#define REG_TWI0_MMR (*(RwReg*)0x40018004U) /**< \brief (TWI0) Master Mode Register */ +#define REG_TWI0_SMR (*(RwReg*)0x40018008U) /**< \brief (TWI0) Slave Mode Register */ +#define REG_TWI0_IADR (*(RwReg*)0x4001800CU) /**< \brief (TWI0) Internal Address Register */ +#define REG_TWI0_CWGR (*(RwReg*)0x40018010U) /**< \brief (TWI0) Clock Waveform Generator Register */ +#define REG_TWI0_SR (*(RoReg*)0x40018020U) /**< \brief (TWI0) Status Register */ +#define REG_TWI0_IER (*(WoReg*)0x40018024U) /**< \brief (TWI0) Interrupt Enable Register */ +#define REG_TWI0_IDR (*(WoReg*)0x40018028U) /**< \brief (TWI0) Interrupt Disable Register */ +#define REG_TWI0_IMR (*(RoReg*)0x4001802CU) /**< \brief (TWI0) Interrupt Mask Register */ +#define REG_TWI0_RHR (*(RoReg*)0x40018030U) /**< \brief (TWI0) Receive Holding Register */ +#define REG_TWI0_THR (*(WoReg*)0x40018034U) /**< \brief (TWI0) Transmit Holding Register */ +#define REG_TWI0_RPR (*(RwReg*)0x40018100U) /**< \brief (TWI0) Receive Pointer Register */ +#define REG_TWI0_RCR (*(RwReg*)0x40018104U) /**< \brief (TWI0) Receive Counter Register */ +#define REG_TWI0_TPR (*(RwReg*)0x40018108U) /**< \brief (TWI0) Transmit Pointer Register */ +#define REG_TWI0_TCR (*(RwReg*)0x4001810CU) /**< \brief (TWI0) Transmit Counter Register */ +#define REG_TWI0_RNPR (*(RwReg*)0x40018110U) /**< \brief (TWI0) Receive Next Pointer Register */ +#define REG_TWI0_RNCR (*(RwReg*)0x40018114U) /**< \brief (TWI0) Receive Next Counter Register */ +#define REG_TWI0_TNPR (*(RwReg*)0x40018118U) /**< \brief (TWI0) Transmit Next Pointer Register */ +#define REG_TWI0_TNCR (*(RwReg*)0x4001811CU) /**< \brief (TWI0) Transmit Next Counter Register */ +#define REG_TWI0_PTCR (*(WoReg*)0x40018120U) /**< \brief (TWI0) Transfer Control Register */ +#define REG_TWI0_PTSR (*(RoReg*)0x40018124U) /**< \brief (TWI0) Transfer Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_TWI0_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_twi1.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_twi1.h new file mode 100644 index 0000000..3f37caf --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_twi1.h
@@ -0,0 +1,90 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_TWI1_INSTANCE_ +#define _SAM4S_TWI1_INSTANCE_ + +/* ========== Register definition for TWI1 peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_TWI1_CR (0x4001C000U) /**< \brief (TWI1) Control Register */ +#define REG_TWI1_MMR (0x4001C004U) /**< \brief (TWI1) Master Mode Register */ +#define REG_TWI1_SMR (0x4001C008U) /**< \brief (TWI1) Slave Mode Register */ +#define REG_TWI1_IADR (0x4001C00CU) /**< \brief (TWI1) Internal Address Register */ +#define REG_TWI1_CWGR (0x4001C010U) /**< \brief (TWI1) Clock Waveform Generator Register */ +#define REG_TWI1_SR (0x4001C020U) /**< \brief (TWI1) Status Register */ +#define REG_TWI1_IER (0x4001C024U) /**< \brief (TWI1) Interrupt Enable Register */ +#define REG_TWI1_IDR (0x4001C028U) /**< \brief (TWI1) Interrupt Disable Register */ +#define REG_TWI1_IMR (0x4001C02CU) /**< \brief (TWI1) Interrupt Mask Register */ +#define REG_TWI1_RHR (0x4001C030U) /**< \brief (TWI1) Receive Holding Register */ +#define REG_TWI1_THR (0x4001C034U) /**< \brief (TWI1) Transmit Holding Register */ +#define REG_TWI1_RPR (0x4001C100U) /**< \brief (TWI1) Receive Pointer Register */ +#define REG_TWI1_RCR (0x4001C104U) /**< \brief (TWI1) Receive Counter Register */ +#define REG_TWI1_TPR (0x4001C108U) /**< \brief (TWI1) Transmit Pointer Register */ +#define REG_TWI1_TCR (0x4001C10CU) /**< \brief (TWI1) Transmit Counter Register */ +#define REG_TWI1_RNPR (0x4001C110U) /**< \brief (TWI1) Receive Next Pointer Register */ +#define REG_TWI1_RNCR (0x4001C114U) /**< \brief (TWI1) Receive Next Counter Register */ +#define REG_TWI1_TNPR (0x4001C118U) /**< \brief (TWI1) Transmit Next Pointer Register */ +#define REG_TWI1_TNCR (0x4001C11CU) /**< \brief (TWI1) Transmit Next Counter Register */ +#define REG_TWI1_PTCR (0x4001C120U) /**< \brief (TWI1) Transfer Control Register */ +#define REG_TWI1_PTSR (0x4001C124U) /**< \brief (TWI1) Transfer Status Register */ +#else +#define REG_TWI1_CR (*(WoReg*)0x4001C000U) /**< \brief (TWI1) Control Register */ +#define REG_TWI1_MMR (*(RwReg*)0x4001C004U) /**< \brief (TWI1) Master Mode Register */ +#define REG_TWI1_SMR (*(RwReg*)0x4001C008U) /**< \brief (TWI1) Slave Mode Register */ +#define REG_TWI1_IADR (*(RwReg*)0x4001C00CU) /**< \brief (TWI1) Internal Address Register */ +#define REG_TWI1_CWGR (*(RwReg*)0x4001C010U) /**< \brief (TWI1) Clock Waveform Generator Register */ +#define REG_TWI1_SR (*(RoReg*)0x4001C020U) /**< \brief (TWI1) Status Register */ +#define REG_TWI1_IER (*(WoReg*)0x4001C024U) /**< \brief (TWI1) Interrupt Enable Register */ +#define REG_TWI1_IDR (*(WoReg*)0x4001C028U) /**< \brief (TWI1) Interrupt Disable Register */ +#define REG_TWI1_IMR (*(RoReg*)0x4001C02CU) /**< \brief (TWI1) Interrupt Mask Register */ +#define REG_TWI1_RHR (*(RoReg*)0x4001C030U) /**< \brief (TWI1) Receive Holding Register */ +#define REG_TWI1_THR (*(WoReg*)0x4001C034U) /**< \brief (TWI1) Transmit Holding Register */ +#define REG_TWI1_RPR (*(RwReg*)0x4001C100U) /**< \brief (TWI1) Receive Pointer Register */ +#define REG_TWI1_RCR (*(RwReg*)0x4001C104U) /**< \brief (TWI1) Receive Counter Register */ +#define REG_TWI1_TPR (*(RwReg*)0x4001C108U) /**< \brief (TWI1) Transmit Pointer Register */ +#define REG_TWI1_TCR (*(RwReg*)0x4001C10CU) /**< \brief (TWI1) Transmit Counter Register */ +#define REG_TWI1_RNPR (*(RwReg*)0x4001C110U) /**< \brief (TWI1) Receive Next Pointer Register */ +#define REG_TWI1_RNCR (*(RwReg*)0x4001C114U) /**< \brief (TWI1) Receive Next Counter Register */ +#define REG_TWI1_TNPR (*(RwReg*)0x4001C118U) /**< \brief (TWI1) Transmit Next Pointer Register */ +#define REG_TWI1_TNCR (*(RwReg*)0x4001C11CU) /**< \brief (TWI1) Transmit Next Counter Register */ +#define REG_TWI1_PTCR (*(WoReg*)0x4001C120U) /**< \brief (TWI1) Transfer Control Register */ +#define REG_TWI1_PTSR (*(RoReg*)0x4001C124U) /**< \brief (TWI1) Transfer Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_TWI1_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_uart0.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_uart0.h new file mode 100644 index 0000000..bcc1390 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_uart0.h
@@ -0,0 +1,86 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_UART0_INSTANCE_ +#define _SAM4S_UART0_INSTANCE_ + +/* ========== Register definition for UART0 peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_UART0_CR (0x400E0600U) /**< \brief (UART0) Control Register */ +#define REG_UART0_MR (0x400E0604U) /**< \brief (UART0) Mode Register */ +#define REG_UART0_IER (0x400E0608U) /**< \brief (UART0) Interrupt Enable Register */ +#define REG_UART0_IDR (0x400E060CU) /**< \brief (UART0) Interrupt Disable Register */ +#define REG_UART0_IMR (0x400E0610U) /**< \brief (UART0) Interrupt Mask Register */ +#define REG_UART0_SR (0x400E0614U) /**< \brief (UART0) Status Register */ +#define REG_UART0_RHR (0x400E0618U) /**< \brief (UART0) Receive Holding Register */ +#define REG_UART0_THR (0x400E061CU) /**< \brief (UART0) Transmit Holding Register */ +#define REG_UART0_BRGR (0x400E0620U) /**< \brief (UART0) Baud Rate Generator Register */ +#define REG_UART0_RPR (0x400E0700U) /**< \brief (UART0) Receive Pointer Register */ +#define REG_UART0_RCR (0x400E0704U) /**< \brief (UART0) Receive Counter Register */ +#define REG_UART0_TPR (0x400E0708U) /**< \brief (UART0) Transmit Pointer Register */ +#define REG_UART0_TCR (0x400E070CU) /**< \brief (UART0) Transmit Counter Register */ +#define REG_UART0_RNPR (0x400E0710U) /**< \brief (UART0) Receive Next Pointer Register */ +#define REG_UART0_RNCR (0x400E0714U) /**< \brief (UART0) Receive Next Counter Register */ +#define REG_UART0_TNPR (0x400E0718U) /**< \brief (UART0) Transmit Next Pointer Register */ +#define REG_UART0_TNCR (0x400E071CU) /**< \brief (UART0) Transmit Next Counter Register */ +#define REG_UART0_PTCR (0x400E0720U) /**< \brief (UART0) Transfer Control Register */ +#define REG_UART0_PTSR (0x400E0724U) /**< \brief (UART0) Transfer Status Register */ +#else +#define REG_UART0_CR (*(WoReg*)0x400E0600U) /**< \brief (UART0) Control Register */ +#define REG_UART0_MR (*(RwReg*)0x400E0604U) /**< \brief (UART0) Mode Register */ +#define REG_UART0_IER (*(WoReg*)0x400E0608U) /**< \brief (UART0) Interrupt Enable Register */ +#define REG_UART0_IDR (*(WoReg*)0x400E060CU) /**< \brief (UART0) Interrupt Disable Register */ +#define REG_UART0_IMR (*(RoReg*)0x400E0610U) /**< \brief (UART0) Interrupt Mask Register */ +#define REG_UART0_SR (*(RoReg*)0x400E0614U) /**< \brief (UART0) Status Register */ +#define REG_UART0_RHR (*(RoReg*)0x400E0618U) /**< \brief (UART0) Receive Holding Register */ +#define REG_UART0_THR (*(WoReg*)0x400E061CU) /**< \brief (UART0) Transmit Holding Register */ +#define REG_UART0_BRGR (*(RwReg*)0x400E0620U) /**< \brief (UART0) Baud Rate Generator Register */ +#define REG_UART0_RPR (*(RwReg*)0x400E0700U) /**< \brief (UART0) Receive Pointer Register */ +#define REG_UART0_RCR (*(RwReg*)0x400E0704U) /**< \brief (UART0) Receive Counter Register */ +#define REG_UART0_TPR (*(RwReg*)0x400E0708U) /**< \brief (UART0) Transmit Pointer Register */ +#define REG_UART0_TCR (*(RwReg*)0x400E070CU) /**< \brief (UART0) Transmit Counter Register */ +#define REG_UART0_RNPR (*(RwReg*)0x400E0710U) /**< \brief (UART0) Receive Next Pointer Register */ +#define REG_UART0_RNCR (*(RwReg*)0x400E0714U) /**< \brief (UART0) Receive Next Counter Register */ +#define REG_UART0_TNPR (*(RwReg*)0x400E0718U) /**< \brief (UART0) Transmit Next Pointer Register */ +#define REG_UART0_TNCR (*(RwReg*)0x400E071CU) /**< \brief (UART0) Transmit Next Counter Register */ +#define REG_UART0_PTCR (*(WoReg*)0x400E0720U) /**< \brief (UART0) Transfer Control Register */ +#define REG_UART0_PTSR (*(RoReg*)0x400E0724U) /**< \brief (UART0) Transfer Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_UART0_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_uart1.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_uart1.h new file mode 100644 index 0000000..fed6b79 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_uart1.h
@@ -0,0 +1,86 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_UART1_INSTANCE_ +#define _SAM4S_UART1_INSTANCE_ + +/* ========== Register definition for UART1 peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_UART1_CR (0x400E0800U) /**< \brief (UART1) Control Register */ +#define REG_UART1_MR (0x400E0804U) /**< \brief (UART1) Mode Register */ +#define REG_UART1_IER (0x400E0808U) /**< \brief (UART1) Interrupt Enable Register */ +#define REG_UART1_IDR (0x400E080CU) /**< \brief (UART1) Interrupt Disable Register */ +#define REG_UART1_IMR (0x400E0810U) /**< \brief (UART1) Interrupt Mask Register */ +#define REG_UART1_SR (0x400E0814U) /**< \brief (UART1) Status Register */ +#define REG_UART1_RHR (0x400E0818U) /**< \brief (UART1) Receive Holding Register */ +#define REG_UART1_THR (0x400E081CU) /**< \brief (UART1) Transmit Holding Register */ +#define REG_UART1_BRGR (0x400E0820U) /**< \brief (UART1) Baud Rate Generator Register */ +#define REG_UART1_RPR (0x400E0900U) /**< \brief (UART1) Receive Pointer Register */ +#define REG_UART1_RCR (0x400E0904U) /**< \brief (UART1) Receive Counter Register */ +#define REG_UART1_TPR (0x400E0908U) /**< \brief (UART1) Transmit Pointer Register */ +#define REG_UART1_TCR (0x400E090CU) /**< \brief (UART1) Transmit Counter Register */ +#define REG_UART1_RNPR (0x400E0910U) /**< \brief (UART1) Receive Next Pointer Register */ +#define REG_UART1_RNCR (0x400E0914U) /**< \brief (UART1) Receive Next Counter Register */ +#define REG_UART1_TNPR (0x400E0918U) /**< \brief (UART1) Transmit Next Pointer Register */ +#define REG_UART1_TNCR (0x400E091CU) /**< \brief (UART1) Transmit Next Counter Register */ +#define REG_UART1_PTCR (0x400E0920U) /**< \brief (UART1) Transfer Control Register */ +#define REG_UART1_PTSR (0x400E0924U) /**< \brief (UART1) Transfer Status Register */ +#else +#define REG_UART1_CR (*(WoReg*)0x400E0800U) /**< \brief (UART1) Control Register */ +#define REG_UART1_MR (*(RwReg*)0x400E0804U) /**< \brief (UART1) Mode Register */ +#define REG_UART1_IER (*(WoReg*)0x400E0808U) /**< \brief (UART1) Interrupt Enable Register */ +#define REG_UART1_IDR (*(WoReg*)0x400E080CU) /**< \brief (UART1) Interrupt Disable Register */ +#define REG_UART1_IMR (*(RoReg*)0x400E0810U) /**< \brief (UART1) Interrupt Mask Register */ +#define REG_UART1_SR (*(RoReg*)0x400E0814U) /**< \brief (UART1) Status Register */ +#define REG_UART1_RHR (*(RoReg*)0x400E0818U) /**< \brief (UART1) Receive Holding Register */ +#define REG_UART1_THR (*(WoReg*)0x400E081CU) /**< \brief (UART1) Transmit Holding Register */ +#define REG_UART1_BRGR (*(RwReg*)0x400E0820U) /**< \brief (UART1) Baud Rate Generator Register */ +#define REG_UART1_RPR (*(RwReg*)0x400E0900U) /**< \brief (UART1) Receive Pointer Register */ +#define REG_UART1_RCR (*(RwReg*)0x400E0904U) /**< \brief (UART1) Receive Counter Register */ +#define REG_UART1_TPR (*(RwReg*)0x400E0908U) /**< \brief (UART1) Transmit Pointer Register */ +#define REG_UART1_TCR (*(RwReg*)0x400E090CU) /**< \brief (UART1) Transmit Counter Register */ +#define REG_UART1_RNPR (*(RwReg*)0x400E0910U) /**< \brief (UART1) Receive Next Pointer Register */ +#define REG_UART1_RNCR (*(RwReg*)0x400E0914U) /**< \brief (UART1) Receive Next Counter Register */ +#define REG_UART1_TNPR (*(RwReg*)0x400E0918U) /**< \brief (UART1) Transmit Next Pointer Register */ +#define REG_UART1_TNCR (*(RwReg*)0x400E091CU) /**< \brief (UART1) Transmit Next Counter Register */ +#define REG_UART1_PTCR (*(WoReg*)0x400E0920U) /**< \brief (UART1) Transfer Control Register */ +#define REG_UART1_PTSR (*(RoReg*)0x400E0924U) /**< \brief (UART1) Transfer Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_UART1_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_udp.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_udp.h new file mode 100644 index 0000000..33a765b --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_udp.h
@@ -0,0 +1,72 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_UDP_INSTANCE_ +#define _SAM4S_UDP_INSTANCE_ + +/* ========== Register definition for UDP peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_UDP_FRM_NUM (0x40034000U) /**< \brief (UDP) Frame Number Register */ +#define REG_UDP_GLB_STAT (0x40034004U) /**< \brief (UDP) Global State Register */ +#define REG_UDP_FADDR (0x40034008U) /**< \brief (UDP) Function Address Register */ +#define REG_UDP_IER (0x40034010U) /**< \brief (UDP) Interrupt Enable Register */ +#define REG_UDP_IDR (0x40034014U) /**< \brief (UDP) Interrupt Disable Register */ +#define REG_UDP_IMR (0x40034018U) /**< \brief (UDP) Interrupt Mask Register */ +#define REG_UDP_ISR (0x4003401CU) /**< \brief (UDP) Interrupt Status Register */ +#define REG_UDP_ICR (0x40034020U) /**< \brief (UDP) Interrupt Clear Register */ +#define REG_UDP_RST_EP (0x40034028U) /**< \brief (UDP) Reset Endpoint Register */ +#define REG_UDP_CSR (0x40034030U) /**< \brief (UDP) Endpoint Control and Status Register */ +#define REG_UDP_FDR (0x40034050U) /**< \brief (UDP) Endpoint FIFO Data Register */ +#define REG_UDP_TXVC (0x40034074U) /**< \brief (UDP) Transceiver Control Register */ +#else +#define REG_UDP_FRM_NUM (*(RoReg*)0x40034000U) /**< \brief (UDP) Frame Number Register */ +#define REG_UDP_GLB_STAT (*(RwReg*)0x40034004U) /**< \brief (UDP) Global State Register */ +#define REG_UDP_FADDR (*(RwReg*)0x40034008U) /**< \brief (UDP) Function Address Register */ +#define REG_UDP_IER (*(WoReg*)0x40034010U) /**< \brief (UDP) Interrupt Enable Register */ +#define REG_UDP_IDR (*(WoReg*)0x40034014U) /**< \brief (UDP) Interrupt Disable Register */ +#define REG_UDP_IMR (*(RoReg*)0x40034018U) /**< \brief (UDP) Interrupt Mask Register */ +#define REG_UDP_ISR (*(RoReg*)0x4003401CU) /**< \brief (UDP) Interrupt Status Register */ +#define REG_UDP_ICR (*(WoReg*)0x40034020U) /**< \brief (UDP) Interrupt Clear Register */ +#define REG_UDP_RST_EP (*(RwReg*)0x40034028U) /**< \brief (UDP) Reset Endpoint Register */ +#define REG_UDP_CSR (*(RwReg*)0x40034030U) /**< \brief (UDP) Endpoint Control and Status Register */ +#define REG_UDP_FDR (*(RwReg*)0x40034050U) /**< \brief (UDP) Endpoint FIFO Data Register */ +#define REG_UDP_TXVC (*(RwReg*)0x40034074U) /**< \brief (UDP) Transceiver Control Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_UDP_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_usart0.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_usart0.h new file mode 100644 index 0000000..0ea0e7c --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_usart0.h
@@ -0,0 +1,104 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_USART0_INSTANCE_ +#define _SAM4S_USART0_INSTANCE_ + +/* ========== Register definition for USART0 peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_USART0_CR (0x40024000U) /**< \brief (USART0) Control Register */ +#define REG_USART0_MR (0x40024004U) /**< \brief (USART0) Mode Register */ +#define REG_USART0_IER (0x40024008U) /**< \brief (USART0) Interrupt Enable Register */ +#define REG_USART0_IDR (0x4002400CU) /**< \brief (USART0) Interrupt Disable Register */ +#define REG_USART0_IMR (0x40024010U) /**< \brief (USART0) Interrupt Mask Register */ +#define REG_USART0_CSR (0x40024014U) /**< \brief (USART0) Channel Status Register */ +#define REG_USART0_RHR (0x40024018U) /**< \brief (USART0) Receiver Holding Register */ +#define REG_USART0_THR (0x4002401CU) /**< \brief (USART0) Transmitter Holding Register */ +#define REG_USART0_BRGR (0x40024020U) /**< \brief (USART0) Baud Rate Generator Register */ +#define REG_USART0_RTOR (0x40024024U) /**< \brief (USART0) Receiver Time-out Register */ +#define REG_USART0_TTGR (0x40024028U) /**< \brief (USART0) Transmitter Timeguard Register */ +#define REG_USART0_FIDI (0x40024040U) /**< \brief (USART0) FI DI Ratio Register */ +#define REG_USART0_NER (0x40024044U) /**< \brief (USART0) Number of Errors Register */ +#define REG_USART0_IF (0x4002404CU) /**< \brief (USART0) IrDA Filter Register */ +#define REG_USART0_MAN (0x40024050U) /**< \brief (USART0) Manchester Encoder Decoder Register */ +#define REG_USART0_WPMR (0x400240E4U) /**< \brief (USART0) Write Protect Mode Register */ +#define REG_USART0_WPSR (0x400240E8U) /**< \brief (USART0) Write Protect Status Register */ +#define REG_USART0_VERSION (0x400240FCU) /**< \brief (USART0) Version Register */ +#define REG_USART0_RPR (0x40024100U) /**< \brief (USART0) Receive Pointer Register */ +#define REG_USART0_RCR (0x40024104U) /**< \brief (USART0) Receive Counter Register */ +#define REG_USART0_TPR (0x40024108U) /**< \brief (USART0) Transmit Pointer Register */ +#define REG_USART0_TCR (0x4002410CU) /**< \brief (USART0) Transmit Counter Register */ +#define REG_USART0_RNPR (0x40024110U) /**< \brief (USART0) Receive Next Pointer Register */ +#define REG_USART0_RNCR (0x40024114U) /**< \brief (USART0) Receive Next Counter Register */ +#define REG_USART0_TNPR (0x40024118U) /**< \brief (USART0) Transmit Next Pointer Register */ +#define REG_USART0_TNCR (0x4002411CU) /**< \brief (USART0) Transmit Next Counter Register */ +#define REG_USART0_PTCR (0x40024120U) /**< \brief (USART0) Transfer Control Register */ +#define REG_USART0_PTSR (0x40024124U) /**< \brief (USART0) Transfer Status Register */ +#else +#define REG_USART0_CR (*(WoReg*)0x40024000U) /**< \brief (USART0) Control Register */ +#define REG_USART0_MR (*(RwReg*)0x40024004U) /**< \brief (USART0) Mode Register */ +#define REG_USART0_IER (*(WoReg*)0x40024008U) /**< \brief (USART0) Interrupt Enable Register */ +#define REG_USART0_IDR (*(WoReg*)0x4002400CU) /**< \brief (USART0) Interrupt Disable Register */ +#define REG_USART0_IMR (*(RoReg*)0x40024010U) /**< \brief (USART0) Interrupt Mask Register */ +#define REG_USART0_CSR (*(RoReg*)0x40024014U) /**< \brief (USART0) Channel Status Register */ +#define REG_USART0_RHR (*(RoReg*)0x40024018U) /**< \brief (USART0) Receiver Holding Register */ +#define REG_USART0_THR (*(WoReg*)0x4002401CU) /**< \brief (USART0) Transmitter Holding Register */ +#define REG_USART0_BRGR (*(RwReg*)0x40024020U) /**< \brief (USART0) Baud Rate Generator Register */ +#define REG_USART0_RTOR (*(RwReg*)0x40024024U) /**< \brief (USART0) Receiver Time-out Register */ +#define REG_USART0_TTGR (*(RwReg*)0x40024028U) /**< \brief (USART0) Transmitter Timeguard Register */ +#define REG_USART0_FIDI (*(RwReg*)0x40024040U) /**< \brief (USART0) FI DI Ratio Register */ +#define REG_USART0_NER (*(RoReg*)0x40024044U) /**< \brief (USART0) Number of Errors Register */ +#define REG_USART0_IF (*(RwReg*)0x4002404CU) /**< \brief (USART0) IrDA Filter Register */ +#define REG_USART0_MAN (*(RwReg*)0x40024050U) /**< \brief (USART0) Manchester Encoder Decoder Register */ +#define REG_USART0_WPMR (*(RwReg*)0x400240E4U) /**< \brief (USART0) Write Protect Mode Register */ +#define REG_USART0_WPSR (*(RoReg*)0x400240E8U) /**< \brief (USART0) Write Protect Status Register */ +#define REG_USART0_VERSION (*(RoReg*)0x400240FCU) /**< \brief (USART0) Version Register */ +#define REG_USART0_RPR (*(RwReg*)0x40024100U) /**< \brief (USART0) Receive Pointer Register */ +#define REG_USART0_RCR (*(RwReg*)0x40024104U) /**< \brief (USART0) Receive Counter Register */ +#define REG_USART0_TPR (*(RwReg*)0x40024108U) /**< \brief (USART0) Transmit Pointer Register */ +#define REG_USART0_TCR (*(RwReg*)0x4002410CU) /**< \brief (USART0) Transmit Counter Register */ +#define REG_USART0_RNPR (*(RwReg*)0x40024110U) /**< \brief (USART0) Receive Next Pointer Register */ +#define REG_USART0_RNCR (*(RwReg*)0x40024114U) /**< \brief (USART0) Receive Next Counter Register */ +#define REG_USART0_TNPR (*(RwReg*)0x40024118U) /**< \brief (USART0) Transmit Next Pointer Register */ +#define REG_USART0_TNCR (*(RwReg*)0x4002411CU) /**< \brief (USART0) Transmit Next Counter Register */ +#define REG_USART0_PTCR (*(WoReg*)0x40024120U) /**< \brief (USART0) Transfer Control Register */ +#define REG_USART0_PTSR (*(RoReg*)0x40024124U) /**< \brief (USART0) Transfer Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_USART0_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_usart1.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_usart1.h new file mode 100644 index 0000000..f28967b --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_usart1.h
@@ -0,0 +1,104 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_USART1_INSTANCE_ +#define _SAM4S_USART1_INSTANCE_ + +/* ========== Register definition for USART1 peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_USART1_CR (0x40028000U) /**< \brief (USART1) Control Register */ +#define REG_USART1_MR (0x40028004U) /**< \brief (USART1) Mode Register */ +#define REG_USART1_IER (0x40028008U) /**< \brief (USART1) Interrupt Enable Register */ +#define REG_USART1_IDR (0x4002800CU) /**< \brief (USART1) Interrupt Disable Register */ +#define REG_USART1_IMR (0x40028010U) /**< \brief (USART1) Interrupt Mask Register */ +#define REG_USART1_CSR (0x40028014U) /**< \brief (USART1) Channel Status Register */ +#define REG_USART1_RHR (0x40028018U) /**< \brief (USART1) Receiver Holding Register */ +#define REG_USART1_THR (0x4002801CU) /**< \brief (USART1) Transmitter Holding Register */ +#define REG_USART1_BRGR (0x40028020U) /**< \brief (USART1) Baud Rate Generator Register */ +#define REG_USART1_RTOR (0x40028024U) /**< \brief (USART1) Receiver Time-out Register */ +#define REG_USART1_TTGR (0x40028028U) /**< \brief (USART1) Transmitter Timeguard Register */ +#define REG_USART1_FIDI (0x40028040U) /**< \brief (USART1) FI DI Ratio Register */ +#define REG_USART1_NER (0x40028044U) /**< \brief (USART1) Number of Errors Register */ +#define REG_USART1_IF (0x4002804CU) /**< \brief (USART1) IrDA Filter Register */ +#define REG_USART1_MAN (0x40028050U) /**< \brief (USART1) Manchester Encoder Decoder Register */ +#define REG_USART1_WPMR (0x400280E4U) /**< \brief (USART1) Write Protect Mode Register */ +#define REG_USART1_WPSR (0x400280E8U) /**< \brief (USART1) Write Protect Status Register */ +#define REG_USART1_VERSION (0x400280FCU) /**< \brief (USART1) Version Register */ +#define REG_USART1_RPR (0x40028100U) /**< \brief (USART1) Receive Pointer Register */ +#define REG_USART1_RCR (0x40028104U) /**< \brief (USART1) Receive Counter Register */ +#define REG_USART1_TPR (0x40028108U) /**< \brief (USART1) Transmit Pointer Register */ +#define REG_USART1_TCR (0x4002810CU) /**< \brief (USART1) Transmit Counter Register */ +#define REG_USART1_RNPR (0x40028110U) /**< \brief (USART1) Receive Next Pointer Register */ +#define REG_USART1_RNCR (0x40028114U) /**< \brief (USART1) Receive Next Counter Register */ +#define REG_USART1_TNPR (0x40028118U) /**< \brief (USART1) Transmit Next Pointer Register */ +#define REG_USART1_TNCR (0x4002811CU) /**< \brief (USART1) Transmit Next Counter Register */ +#define REG_USART1_PTCR (0x40028120U) /**< \brief (USART1) Transfer Control Register */ +#define REG_USART1_PTSR (0x40028124U) /**< \brief (USART1) Transfer Status Register */ +#else +#define REG_USART1_CR (*(WoReg*)0x40028000U) /**< \brief (USART1) Control Register */ +#define REG_USART1_MR (*(RwReg*)0x40028004U) /**< \brief (USART1) Mode Register */ +#define REG_USART1_IER (*(WoReg*)0x40028008U) /**< \brief (USART1) Interrupt Enable Register */ +#define REG_USART1_IDR (*(WoReg*)0x4002800CU) /**< \brief (USART1) Interrupt Disable Register */ +#define REG_USART1_IMR (*(RoReg*)0x40028010U) /**< \brief (USART1) Interrupt Mask Register */ +#define REG_USART1_CSR (*(RoReg*)0x40028014U) /**< \brief (USART1) Channel Status Register */ +#define REG_USART1_RHR (*(RoReg*)0x40028018U) /**< \brief (USART1) Receiver Holding Register */ +#define REG_USART1_THR (*(WoReg*)0x4002801CU) /**< \brief (USART1) Transmitter Holding Register */ +#define REG_USART1_BRGR (*(RwReg*)0x40028020U) /**< \brief (USART1) Baud Rate Generator Register */ +#define REG_USART1_RTOR (*(RwReg*)0x40028024U) /**< \brief (USART1) Receiver Time-out Register */ +#define REG_USART1_TTGR (*(RwReg*)0x40028028U) /**< \brief (USART1) Transmitter Timeguard Register */ +#define REG_USART1_FIDI (*(RwReg*)0x40028040U) /**< \brief (USART1) FI DI Ratio Register */ +#define REG_USART1_NER (*(RoReg*)0x40028044U) /**< \brief (USART1) Number of Errors Register */ +#define REG_USART1_IF (*(RwReg*)0x4002804CU) /**< \brief (USART1) IrDA Filter Register */ +#define REG_USART1_MAN (*(RwReg*)0x40028050U) /**< \brief (USART1) Manchester Encoder Decoder Register */ +#define REG_USART1_WPMR (*(RwReg*)0x400280E4U) /**< \brief (USART1) Write Protect Mode Register */ +#define REG_USART1_WPSR (*(RoReg*)0x400280E8U) /**< \brief (USART1) Write Protect Status Register */ +#define REG_USART1_VERSION (*(RoReg*)0x400280FCU) /**< \brief (USART1) Version Register */ +#define REG_USART1_RPR (*(RwReg*)0x40028100U) /**< \brief (USART1) Receive Pointer Register */ +#define REG_USART1_RCR (*(RwReg*)0x40028104U) /**< \brief (USART1) Receive Counter Register */ +#define REG_USART1_TPR (*(RwReg*)0x40028108U) /**< \brief (USART1) Transmit Pointer Register */ +#define REG_USART1_TCR (*(RwReg*)0x4002810CU) /**< \brief (USART1) Transmit Counter Register */ +#define REG_USART1_RNPR (*(RwReg*)0x40028110U) /**< \brief (USART1) Receive Next Pointer Register */ +#define REG_USART1_RNCR (*(RwReg*)0x40028114U) /**< \brief (USART1) Receive Next Counter Register */ +#define REG_USART1_TNPR (*(RwReg*)0x40028118U) /**< \brief (USART1) Transmit Next Pointer Register */ +#define REG_USART1_TNCR (*(RwReg*)0x4002811CU) /**< \brief (USART1) Transmit Next Counter Register */ +#define REG_USART1_PTCR (*(WoReg*)0x40028120U) /**< \brief (USART1) Transfer Control Register */ +#define REG_USART1_PTSR (*(RoReg*)0x40028124U) /**< \brief (USART1) Transfer Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_USART1_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_wdt.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_wdt.h new file mode 100644 index 0000000..05563a1 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/instance/instance_wdt.h
@@ -0,0 +1,54 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_WDT_INSTANCE_ +#define _SAM4S_WDT_INSTANCE_ + +/* ========== Register definition for WDT peripheral ========== */ +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define REG_WDT_CR (0x400E1450U) /**< \brief (WDT) Control Register */ +#define REG_WDT_MR (0x400E1454U) /**< \brief (WDT) Mode Register */ +#define REG_WDT_SR (0x400E1458U) /**< \brief (WDT) Status Register */ +#else +#define REG_WDT_CR (*(WoReg*)0x400E1450U) /**< \brief (WDT) Control Register */ +#define REG_WDT_MR (*(RwReg*)0x400E1454U) /**< \brief (WDT) Mode Register */ +#define REG_WDT_SR (*(RoReg*)0x400E1458U) /**< \brief (WDT) Status Register */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + +#endif /* _SAM4S_WDT_INSTANCE_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/pio/pio_sam4s16c.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/pio/pio_sam4s16c.h new file mode 100644 index 0000000..5992f89 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/pio/pio_sam4s16c.h
@@ -0,0 +1,407 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S16C_PIO_ +#define _SAM4S16C_PIO_ + +#define PIO_PA0 (1u << 0) /**< \brief Pin Controlled by PA0 */ +#define PIO_PA1 (1u << 1) /**< \brief Pin Controlled by PA1 */ +#define PIO_PA2 (1u << 2) /**< \brief Pin Controlled by PA2 */ +#define PIO_PA3 (1u << 3) /**< \brief Pin Controlled by PA3 */ +#define PIO_PA4 (1u << 4) /**< \brief Pin Controlled by PA4 */ +#define PIO_PA5 (1u << 5) /**< \brief Pin Controlled by PA5 */ +#define PIO_PA6 (1u << 6) /**< \brief Pin Controlled by PA6 */ +#define PIO_PA7 (1u << 7) /**< \brief Pin Controlled by PA7 */ +#define PIO_PA8 (1u << 8) /**< \brief Pin Controlled by PA8 */ +#define PIO_PA9 (1u << 9) /**< \brief Pin Controlled by PA9 */ +#define PIO_PA10 (1u << 10) /**< \brief Pin Controlled by PA10 */ +#define PIO_PA11 (1u << 11) /**< \brief Pin Controlled by PA11 */ +#define PIO_PA12 (1u << 12) /**< \brief Pin Controlled by PA12 */ +#define PIO_PA13 (1u << 13) /**< \brief Pin Controlled by PA13 */ +#define PIO_PA14 (1u << 14) /**< \brief Pin Controlled by PA14 */ +#define PIO_PA15 (1u << 15) /**< \brief Pin Controlled by PA15 */ +#define PIO_PA16 (1u << 16) /**< \brief Pin Controlled by PA16 */ +#define PIO_PA17 (1u << 17) /**< \brief Pin Controlled by PA17 */ +#define PIO_PA18 (1u << 18) /**< \brief Pin Controlled by PA18 */ +#define PIO_PA19 (1u << 19) /**< \brief Pin Controlled by PA19 */ +#define PIO_PA20 (1u << 20) /**< \brief Pin Controlled by PA20 */ +#define PIO_PA21 (1u << 21) /**< \brief Pin Controlled by PA21 */ +#define PIO_PA22 (1u << 22) /**< \brief Pin Controlled by PA22 */ +#define PIO_PA23 (1u << 23) /**< \brief Pin Controlled by PA23 */ +#define PIO_PA24 (1u << 24) /**< \brief Pin Controlled by PA24 */ +#define PIO_PA25 (1u << 25) /**< \brief Pin Controlled by PA25 */ +#define PIO_PA26 (1u << 26) /**< \brief Pin Controlled by PA26 */ +#define PIO_PA27 (1u << 27) /**< \brief Pin Controlled by PA27 */ +#define PIO_PA28 (1u << 28) /**< \brief Pin Controlled by PA28 */ +#define PIO_PA29 (1u << 29) /**< \brief Pin Controlled by PA29 */ +#define PIO_PA30 (1u << 30) /**< \brief Pin Controlled by PA30 */ +#define PIO_PA31 (1u << 31) /**< \brief Pin Controlled by PA31 */ +#define PIO_PB0 (1u << 0) /**< \brief Pin Controlled by PB0 */ +#define PIO_PB1 (1u << 1) /**< \brief Pin Controlled by PB1 */ +#define PIO_PB2 (1u << 2) /**< \brief Pin Controlled by PB2 */ +#define PIO_PB3 (1u << 3) /**< \brief Pin Controlled by PB3 */ +#define PIO_PB4 (1u << 4) /**< \brief Pin Controlled by PB4 */ +#define PIO_PB5 (1u << 5) /**< \brief Pin Controlled by PB5 */ +#define PIO_PB6 (1u << 6) /**< \brief Pin Controlled by PB6 */ +#define PIO_PB7 (1u << 7) /**< \brief Pin Controlled by PB7 */ +#define PIO_PB8 (1u << 8) /**< \brief Pin Controlled by PB8 */ +#define PIO_PB9 (1u << 9) /**< \brief Pin Controlled by PB9 */ +#define PIO_PB10 (1u << 10) /**< \brief Pin Controlled by PB10 */ +#define PIO_PB11 (1u << 11) /**< \brief Pin Controlled by PB11 */ +#define PIO_PB12 (1u << 12) /**< \brief Pin Controlled by PB12 */ +#define PIO_PB13 (1u << 13) /**< \brief Pin Controlled by PB13 */ +#define PIO_PB14 (1u << 14) /**< \brief Pin Controlled by PB14 */ +#define PIO_PC0 (1u << 0) /**< \brief Pin Controlled by PC0 */ +#define PIO_PC1 (1u << 1) /**< \brief Pin Controlled by PC1 */ +#define PIO_PC2 (1u << 2) /**< \brief Pin Controlled by PC2 */ +#define PIO_PC3 (1u << 3) /**< \brief Pin Controlled by PC3 */ +#define PIO_PC4 (1u << 4) /**< \brief Pin Controlled by PC4 */ +#define PIO_PC5 (1u << 5) /**< \brief Pin Controlled by PC5 */ +#define PIO_PC6 (1u << 6) /**< \brief Pin Controlled by PC6 */ +#define PIO_PC7 (1u << 7) /**< \brief Pin Controlled by PC7 */ +#define PIO_PC8 (1u << 8) /**< \brief Pin Controlled by PC8 */ +#define PIO_PC9 (1u << 9) /**< \brief Pin Controlled by PC9 */ +#define PIO_PC10 (1u << 10) /**< \brief Pin Controlled by PC10 */ +#define PIO_PC11 (1u << 11) /**< \brief Pin Controlled by PC11 */ +#define PIO_PC12 (1u << 12) /**< \brief Pin Controlled by PC12 */ +#define PIO_PC13 (1u << 13) /**< \brief Pin Controlled by PC13 */ +#define PIO_PC14 (1u << 14) /**< \brief Pin Controlled by PC14 */ +#define PIO_PC15 (1u << 15) /**< \brief Pin Controlled by PC15 */ +#define PIO_PC16 (1u << 16) /**< \brief Pin Controlled by PC16 */ +#define PIO_PC17 (1u << 17) /**< \brief Pin Controlled by PC17 */ +#define PIO_PC18 (1u << 18) /**< \brief Pin Controlled by PC18 */ +#define PIO_PC19 (1u << 19) /**< \brief Pin Controlled by PC19 */ +#define PIO_PC20 (1u << 20) /**< \brief Pin Controlled by PC20 */ +#define PIO_PC21 (1u << 21) /**< \brief Pin Controlled by PC21 */ +#define PIO_PC22 (1u << 22) /**< \brief Pin Controlled by PC22 */ +#define PIO_PC23 (1u << 23) /**< \brief Pin Controlled by PC23 */ +#define PIO_PC24 (1u << 24) /**< \brief Pin Controlled by PC24 */ +#define PIO_PC25 (1u << 25) /**< \brief Pin Controlled by PC25 */ +#define PIO_PC26 (1u << 26) /**< \brief Pin Controlled by PC26 */ +#define PIO_PC27 (1u << 27) /**< \brief Pin Controlled by PC27 */ +#define PIO_PC28 (1u << 28) /**< \brief Pin Controlled by PC28 */ +#define PIO_PC29 (1u << 29) /**< \brief Pin Controlled by PC29 */ +#define PIO_PC30 (1u << 30) /**< \brief Pin Controlled by PC30 */ +#define PIO_PC31 (1u << 31) /**< \brief Pin Controlled by PC31 */ +/* ========== Pio definition for ADC peripheral ========== */ +#define PIO_PA17X1_AD0 (1u << 17) /**< \brief Adc signal: AD0 */ +#define PIO_PA18X1_AD1 (1u << 18) /**< \brief Adc signal: AD1 */ +#define PIO_PC13X1_AD10 (1u << 13) /**< \brief Adc signal: AD10 */ +#define PIO_PC15X1_AD11 (1u << 15) /**< \brief Adc signal: AD11 */ +#define PIO_PC12X1_AD12 (1u << 12) /**< \brief Adc signal: AD12 */ +#define PIO_PC29X1_AD13 (1u << 29) /**< \brief Adc signal: AD13 */ +#define PIO_PC30X1_AD14 (1u << 30) /**< \brief Adc signal: AD14 */ +#define PIO_PA19X1_AD2 (1u << 19) /**< \brief Adc signal: AD2/WKUP9 */ +#define PIO_PA19X1_WKUP9 (1u << 19) /**< \brief Adc signal: AD2/WKUP9 */ +#define PIO_PA20X1_AD3 (1u << 20) /**< \brief Adc signal: AD3/WKUP10 */ +#define PIO_PA20X1_WKUP10 (1u << 20) /**< \brief Adc signal: AD3/WKUP10 */ +#define PIO_PB0X1_AD4 (1u << 0) /**< \brief Adc signal: AD4/RTCOUT0 */ +#define PIO_PB0X1_RTCOUT0 (1u << 0) /**< \brief Adc signal: AD4/RTCOUT0 */ +#define PIO_PB1X1_AD5 (1u << 1) /**< \brief Adc signal: AD5/RTCOUT1 */ +#define PIO_PB1X1_RTCOUT1 (1u << 1) /**< \brief Adc signal: AD5/RTCOUT1 */ +#define PIO_PB2X1_AD6 (1u << 2) /**< \brief Adc signal: AD6/WKUP12 */ +#define PIO_PB2X1_WKUP12 (1u << 2) /**< \brief Adc signal: AD6/WKUP12 */ +#define PIO_PB3X1_AD7 (1u << 3) /**< \brief Adc signal: AD7 */ +#define PIO_PA21X1_AD8 (1u << 21) /**< \brief Adc signal: AD8 */ +#define PIO_PA22X1_AD9 (1u << 22) /**< \brief Adc signal: AD9 */ +#define PIO_PA8B_ADTRG (1u << 8) /**< \brief Adc signal: ADTRG */ +/* ========== Pio definition for DACC peripheral ========== */ +#define PIO_PB13X1_DAC0 (1u << 13) /**< \brief Dacc signal: DAC0 */ +#define PIO_PB14X1_DAC1 (1u << 14) /**< \brief Dacc signal: DAC1 */ +#define PIO_PA2C_DATRG (1u << 2) /**< \brief Dacc signal: DATRG */ +/* ========== Pio definition for EBI peripheral ========== */ +#define PIO_PC18A_A0 (1u << 18) /**< \brief Ebi signal: A0 */ +#define PIO_PC19A_A1 (1u << 19) /**< \brief Ebi signal: A1 */ +#define PIO_PC28A_A10 (1u << 28) /**< \brief Ebi signal: A10 */ +#define PIO_PC29A_A11 (1u << 29) /**< \brief Ebi signal: A11 */ +#define PIO_PC30A_A12 (1u << 30) /**< \brief Ebi signal: A12 */ +#define PIO_PC31A_A13 (1u << 31) /**< \brief Ebi signal: A13 */ +#define PIO_PA18C_A14 (1u << 18) /**< \brief Ebi signal: A14 */ +#define PIO_PA19C_A15 (1u << 19) /**< \brief Ebi signal: A15 */ +#define PIO_PA20C_A16 (1u << 20) /**< \brief Ebi signal: A16 */ +#define PIO_PA0C_A17 (1u << 0) /**< \brief Ebi signal: A17 */ +#define PIO_PA1C_A18 (1u << 1) /**< \brief Ebi signal: A18 */ +#define PIO_PA23C_A19 (1u << 23) /**< \brief Ebi signal: A19 */ +#define PIO_PC20A_A2 (1u << 20) /**< \brief Ebi signal: A2 */ +#define PIO_PA24C_A20 (1u << 24) /**< \brief Ebi signal: A20 */ +#define PIO_PC16A_A21 (1u << 16) /**< \brief Ebi signal: A21/NANDALE */ +#define PIO_PC16A_NANDALE (1u << 16) /**< \brief Ebi signal: A21/NANDALE */ +#define PIO_PC17A_A22 (1u << 17) /**< \brief Ebi signal: A22/NANDCLE */ +#define PIO_PC17A_NANDCLE (1u << 17) /**< \brief Ebi signal: A22/NANDCLE */ +#define PIO_PA25C_A23 (1u << 25) /**< \brief Ebi signal: A23 */ +#define PIO_PC21A_A3 (1u << 21) /**< \brief Ebi signal: A3 */ +#define PIO_PC22A_A4 (1u << 22) /**< \brief Ebi signal: A4 */ +#define PIO_PC23A_A5 (1u << 23) /**< \brief Ebi signal: A5 */ +#define PIO_PC24A_A6 (1u << 24) /**< \brief Ebi signal: A6 */ +#define PIO_PC25A_A7 (1u << 25) /**< \brief Ebi signal: A7 */ +#define PIO_PC26A_A8 (1u << 26) /**< \brief Ebi signal: A8 */ +#define PIO_PC27A_A9 (1u << 27) /**< \brief Ebi signal: A9 */ +#define PIO_PC0A_D0 (1u << 0) /**< \brief Ebi signal: D0 */ +#define PIO_PC1A_D1 (1u << 1) /**< \brief Ebi signal: D1 */ +#define PIO_PC2A_D2 (1u << 2) /**< \brief Ebi signal: D2 */ +#define PIO_PC3A_D3 (1u << 3) /**< \brief Ebi signal: D3 */ +#define PIO_PC4A_D4 (1u << 4) /**< \brief Ebi signal: D4 */ +#define PIO_PC5A_D5 (1u << 5) /**< \brief Ebi signal: D5 */ +#define PIO_PC6A_D6 (1u << 6) /**< \brief Ebi signal: D6 */ +#define PIO_PC7A_D7 (1u << 7) /**< \brief Ebi signal: D7 */ +#define PIO_PC9A_NANDOE (1u << 9) /**< \brief Ebi signal: NANDOE */ +#define PIO_PC10A_NANDWE (1u << 10) /**< \brief Ebi signal: NANDWE */ +#define PIO_PC14A_NCS0 (1u << 14) /**< \brief Ebi signal: NCS0 */ +#define PIO_PC15A_NCS1 (1u << 15) /**< \brief Ebi signal: NCS1 */ +#define PIO_PA22C_NCS2 (1u << 22) /**< \brief Ebi signal: NCS2 */ +#define PIO_PC12A_NCS3 (1u << 12) /**< \brief Ebi signal: NCS3 */ +#define PIO_PC11A_NRD (1u << 11) /**< \brief Ebi signal: NRD */ +#define PIO_PC13A_NWAIT (1u << 13) /**< \brief Ebi signal: NWAIT */ +#define PIO_PC8A_NWE (1u << 8) /**< \brief Ebi signal: NWE */ +/* ========== Pio definition for HSMCI peripheral ========== */ +#define PIO_PA28C_MCCDA (1u << 28) /**< \brief Hsmci signal: MCCDA */ +#define PIO_PA29C_MCCK (1u << 29) /**< \brief Hsmci signal: MCCK */ +#define PIO_PA30C_MCDA0 (1u << 30) /**< \brief Hsmci signal: MCDA0 */ +#define PIO_PA31C_MCDA1 (1u << 31) /**< \brief Hsmci signal: MCDA1 */ +#define PIO_PA26C_MCDA2 (1u << 26) /**< \brief Hsmci signal: MCDA2 */ +#define PIO_PA27C_MCDA3 (1u << 27) /**< \brief Hsmci signal: MCDA3 */ +/* ========== Pio definition for PIOA peripheral ========== */ +#define PIO_PA24D_PIODC0 (1u << 24) /**< \brief Pioa signal: PIODC0 */ +#define PIO_PA25D_PIODC1 (1u << 25) /**< \brief Pioa signal: PIODC1 */ +#define PIO_PA26D_PIODC2 (1u << 26) /**< \brief Pioa signal: PIODC2 */ +#define PIO_PA27D_PIODC3 (1u << 27) /**< \brief Pioa signal: PIODC3 */ +#define PIO_PA28D_PIODC4 (1u << 28) /**< \brief Pioa signal: PIODC4 */ +#define PIO_PA29D_PIODC5 (1u << 29) /**< \brief Pioa signal: PIODC5 */ +#define PIO_PA30D_PIODC6 (1u << 30) /**< \brief Pioa signal: PIODC6 */ +#define PIO_PA31D_PIODC7 (1u << 31) /**< \brief Pioa signal: PIODC7 */ +#define PIO_PA23D_PIODCCLK (1u << 23) /**< \brief Pioa signal: PIODCCLK */ +#define PIO_PA15D_PIODCEN1 (1u << 15) /**< \brief Pioa signal: PIODCEN1 */ +#define PIO_PA16D_PIODCEN2 (1u << 16) /**< \brief Pioa signal: PIODCEN2 */ +/* ========== Pio definition for PMC peripheral ========== */ +#define PIO_PA6B_PCK0 (1u << 6) /**< \brief Pmc signal: PCK0 */ +#define PIO_PB13B_PCK0 (1u << 13) /**< \brief Pmc signal: PCK0 */ +#define PIO_PA17B_PCK1 (1u << 17) /**< \brief Pmc signal: PCK1 */ +#define PIO_PA21B_PCK1 (1u << 21) /**< \brief Pmc signal: PCK1 */ +#define PIO_PA18B_PCK2 (1u << 18) /**< \brief Pmc signal: PCK2 */ +#define PIO_PA31B_PCK2 (1u << 31) /**< \brief Pmc signal: PCK2 */ +#define PIO_PB3B_PCK2 (1u << 3) /**< \brief Pmc signal: PCK2 */ +/* ========== Pio definition for PWM peripheral ========== */ +#define PIO_PA9C_PWMFI0 (1u << 9) /**< \brief Pwm signal: PWMFI0 */ +#define PIO_PA0A_PWMH0 (1u << 0) /**< \brief Pwm signal: PWMH0 */ +#define PIO_PA11B_PWMH0 (1u << 11) /**< \brief Pwm signal: PWMH0 */ +#define PIO_PA23B_PWMH0 (1u << 23) /**< \brief Pwm signal: PWMH0 */ +#define PIO_PB0A_PWMH0 (1u << 0) /**< \brief Pwm signal: PWMH0 */ +#define PIO_PC18B_PWMH0 (1u << 18) /**< \brief Pwm signal: PWMH0 */ +#define PIO_PA1A_PWMH1 (1u << 1) /**< \brief Pwm signal: PWMH1 */ +#define PIO_PA12B_PWMH1 (1u << 12) /**< \brief Pwm signal: PWMH1 */ +#define PIO_PA24B_PWMH1 (1u << 24) /**< \brief Pwm signal: PWMH1 */ +#define PIO_PB1A_PWMH1 (1u << 1) /**< \brief Pwm signal: PWMH1 */ +#define PIO_PC19B_PWMH1 (1u << 19) /**< \brief Pwm signal: PWMH1 */ +#define PIO_PA2A_PWMH2 (1u << 2) /**< \brief Pwm signal: PWMH2 */ +#define PIO_PA13B_PWMH2 (1u << 13) /**< \brief Pwm signal: PWMH2 */ +#define PIO_PA25B_PWMH2 (1u << 25) /**< \brief Pwm signal: PWMH2 */ +#define PIO_PB4B_PWMH2 (1u << 4) /**< \brief Pwm signal: PWMH2 */ +#define PIO_PC20B_PWMH2 (1u << 20) /**< \brief Pwm signal: PWMH2 */ +#define PIO_PA7B_PWMH3 (1u << 7) /**< \brief Pwm signal: PWMH3 */ +#define PIO_PA14B_PWMH3 (1u << 14) /**< \brief Pwm signal: PWMH3 */ +#define PIO_PA17C_PWMH3 (1u << 17) /**< \brief Pwm signal: PWMH3 */ +#define PIO_PB14B_PWMH3 (1u << 14) /**< \brief Pwm signal: PWMH3 */ +#define PIO_PC21B_PWMH3 (1u << 21) /**< \brief Pwm signal: PWMH3 */ +#define PIO_PA19B_PWML0 (1u << 19) /**< \brief Pwm signal: PWML0 */ +#define PIO_PB5B_PWML0 (1u << 5) /**< \brief Pwm signal: PWML0 */ +#define PIO_PC0B_PWML0 (1u << 0) /**< \brief Pwm signal: PWML0 */ +#define PIO_PC13B_PWML0 (1u << 13) /**< \brief Pwm signal: PWML0 */ +#define PIO_PA20B_PWML1 (1u << 20) /**< \brief Pwm signal: PWML1 */ +#define PIO_PB12A_PWML1 (1u << 12) /**< \brief Pwm signal: PWML1 */ +#define PIO_PC1B_PWML1 (1u << 1) /**< \brief Pwm signal: PWML1 */ +#define PIO_PC15B_PWML1 (1u << 15) /**< \brief Pwm signal: PWML1 */ +#define PIO_PA16C_PWML2 (1u << 16) /**< \brief Pwm signal: PWML2 */ +#define PIO_PA30A_PWML2 (1u << 30) /**< \brief Pwm signal: PWML2 */ +#define PIO_PB13A_PWML2 (1u << 13) /**< \brief Pwm signal: PWML2 */ +#define PIO_PC2B_PWML2 (1u << 2) /**< \brief Pwm signal: PWML2 */ +#define PIO_PA15C_PWML3 (1u << 15) /**< \brief Pwm signal: PWML3 */ +#define PIO_PC3B_PWML3 (1u << 3) /**< \brief Pwm signal: PWML3 */ +#define PIO_PC22B_PWML3 (1u << 22) /**< \brief Pwm signal: PWML3 */ +/* ========== Pio definition for SPI peripheral ========== */ +#define PIO_PA12A_MISO (1u << 12) /**< \brief Spi signal: MISO */ +#define PIO_PA13A_MOSI (1u << 13) /**< \brief Spi signal: MOSI */ +#define PIO_PA11A_NPCS0 (1u << 11) /**< \brief Spi signal: NPCS0 */ +#define PIO_PA9B_NPCS1 (1u << 9) /**< \brief Spi signal: NPCS1 */ +#define PIO_PA31A_NPCS1 (1u << 31) /**< \brief Spi signal: NPCS1 */ +#define PIO_PB14A_NPCS1 (1u << 14) /**< \brief Spi signal: NPCS1 */ +#define PIO_PC4B_NPCS1 (1u << 4) /**< \brief Spi signal: NPCS1 */ +#define PIO_PA10B_NPCS2 (1u << 10) /**< \brief Spi signal: NPCS2 */ +#define PIO_PA30B_NPCS2 (1u << 30) /**< \brief Spi signal: NPCS2 */ +#define PIO_PB2B_NPCS2 (1u << 2) /**< \brief Spi signal: NPCS2 */ +#define PIO_PA3B_NPCS3 (1u << 3) /**< \brief Spi signal: NPCS3 */ +#define PIO_PA5B_NPCS3 (1u << 5) /**< \brief Spi signal: NPCS3 */ +#define PIO_PA22B_NPCS3 (1u << 22) /**< \brief Spi signal: NPCS3 */ +#define PIO_PA14A_SPCK (1u << 14) /**< \brief Spi signal: SPCK */ +/* ========== Pio definition for SSC peripheral ========== */ +#define PIO_PA18A_RD (1u << 18) /**< \brief Ssc signal: RD */ +#define PIO_PA20A_RF (1u << 20) /**< \brief Ssc signal: RF */ +#define PIO_PA19A_RK (1u << 19) /**< \brief Ssc signal: RK */ +#define PIO_PA17A_TD (1u << 17) /**< \brief Ssc signal: TD */ +#define PIO_PA15A_TF (1u << 15) /**< \brief Ssc signal: TF */ +#define PIO_PA16A_TK (1u << 16) /**< \brief Ssc signal: TK */ +/* ========== Pio definition for TC0 peripheral ========== */ +#define PIO_PA4B_TCLK0 (1u << 4) /**< \brief Tc0 signal: TCLK0 */ +#define PIO_PA28B_TCLK1 (1u << 28) /**< \brief Tc0 signal: TCLK1 */ +#define PIO_PA29B_TCLK2 (1u << 29) /**< \brief Tc0 signal: TCLK2 */ +#define PIO_PA0B_TIOA0 (1u << 0) /**< \brief Tc0 signal: TIOA0 */ +#define PIO_PA15B_TIOA1 (1u << 15) /**< \brief Tc0 signal: TIOA1 */ +#define PIO_PA26B_TIOA2 (1u << 26) /**< \brief Tc0 signal: TIOA2 */ +#define PIO_PA1B_TIOB0 (1u << 1) /**< \brief Tc0 signal: TIOB0 */ +#define PIO_PA16B_TIOB1 (1u << 16) /**< \brief Tc0 signal: TIOB1 */ +#define PIO_PA27B_TIOB2 (1u << 27) /**< \brief Tc0 signal: TIOB2 */ +/* ========== Pio definition for TC1 peripheral ========== */ +#define PIO_PC25B_TCLK3 (1u << 25) /**< \brief Tc1 signal: TCLK3 */ +#define PIO_PC28B_TCLK4 (1u << 28) /**< \brief Tc1 signal: TCLK4 */ +#define PIO_PC31B_TCLK5 (1u << 31) /**< \brief Tc1 signal: TCLK5 */ +#define PIO_PC23B_TIOA3 (1u << 23) /**< \brief Tc1 signal: TIOA3 */ +#define PIO_PC26B_TIOA4 (1u << 26) /**< \brief Tc1 signal: TIOA4 */ +#define PIO_PC29B_TIOA5 (1u << 29) /**< \brief Tc1 signal: TIOA5 */ +#define PIO_PC24B_TIOB3 (1u << 24) /**< \brief Tc1 signal: TIOB3 */ +#define PIO_PC27B_TIOB4 (1u << 27) /**< \brief Tc1 signal: TIOB4 */ +#define PIO_PC30B_TIOB5 (1u << 30) /**< \brief Tc1 signal: TIOB5 */ +/* ========== Pio definition for TWI0 peripheral ========== */ +#define PIO_PA4A_TWCK0 (1u << 4) /**< \brief Twi0 signal: TWCK0 */ +#define PIO_PA3A_TWD0 (1u << 3) /**< \brief Twi0 signal: TWD0 */ +/* ========== Pio definition for TWI1 peripheral ========== */ +#define PIO_PB5A_TWCK1 (1u << 5) /**< \brief Twi1 signal: TWCK1 */ +#define PIO_PB4A_TWD1 (1u << 4) /**< \brief Twi1 signal: TWD1 */ +/* ========== Pio definition for UART0 peripheral ========== */ +#define PIO_PA9A_URXD0 (1u << 9) /**< \brief Uart0 signal: URXD0 */ +#define PIO_PA10A_UTXD0 (1u << 10) /**< \brief Uart0 signal: UTXD0 */ +/* ========== Pio definition for UART1 peripheral ========== */ +#define PIO_PB2A_URXD1 (1u << 2) /**< \brief Uart1 signal: URXD1 */ +#define PIO_PB3A_UTXD1 (1u << 3) /**< \brief Uart1 signal: UTXD1 */ +/* ========== Pio definition for USART0 peripheral ========== */ +#define PIO_PA8A_CTS0 (1u << 8) /**< \brief Usart0 signal: CTS0 */ +#define PIO_PA7A_RTS0 (1u << 7) /**< \brief Usart0 signal: RTS0 */ +#define PIO_PA5A_RXD0 (1u << 5) /**< \brief Usart0 signal: RXD0 */ +#define PIO_PA2B_SCK0 (1u << 2) /**< \brief Usart0 signal: SCK0 */ +#define PIO_PA6A_TXD0 (1u << 6) /**< \brief Usart0 signal: TXD0 */ +/* ========== Pio definition for USART1 peripheral ========== */ +#define PIO_PA25A_CTS1 (1u << 25) /**< \brief Usart1 signal: CTS1 */ +#define PIO_PA26A_DCD1 (1u << 26) /**< \brief Usart1 signal: DCD1 */ +#define PIO_PA28A_DSR1 (1u << 28) /**< \brief Usart1 signal: DSR1 */ +#define PIO_PA27A_DTR1 (1u << 27) /**< \brief Usart1 signal: DTR1 */ +#define PIO_PA29A_RI1 (1u << 29) /**< \brief Usart1 signal: RI1 */ +#define PIO_PA24A_RTS1 (1u << 24) /**< \brief Usart1 signal: RTS1 */ +#define PIO_PA21A_RXD1 (1u << 21) /**< \brief Usart1 signal: RXD1 */ +#define PIO_PA23A_SCK1 (1u << 23) /**< \brief Usart1 signal: SCK1 */ +#define PIO_PA22A_TXD1 (1u << 22) /**< \brief Usart1 signal: TXD1 */ +/* ========== Pio indexes ========== */ +#define PIO_PA0_IDX 0 +#define PIO_PA1_IDX 1 +#define PIO_PA2_IDX 2 +#define PIO_PA3_IDX 3 +#define PIO_PA4_IDX 4 +#define PIO_PA5_IDX 5 +#define PIO_PA6_IDX 6 +#define PIO_PA7_IDX 7 +#define PIO_PA8_IDX 8 +#define PIO_PA9_IDX 9 +#define PIO_PA10_IDX 10 +#define PIO_PA11_IDX 11 +#define PIO_PA12_IDX 12 +#define PIO_PA13_IDX 13 +#define PIO_PA14_IDX 14 +#define PIO_PA15_IDX 15 +#define PIO_PA16_IDX 16 +#define PIO_PA17_IDX 17 +#define PIO_PA18_IDX 18 +#define PIO_PA19_IDX 19 +#define PIO_PA20_IDX 20 +#define PIO_PA21_IDX 21 +#define PIO_PA22_IDX 22 +#define PIO_PA23_IDX 23 +#define PIO_PA24_IDX 24 +#define PIO_PA25_IDX 25 +#define PIO_PA26_IDX 26 +#define PIO_PA27_IDX 27 +#define PIO_PA28_IDX 28 +#define PIO_PA29_IDX 29 +#define PIO_PA30_IDX 30 +#define PIO_PA31_IDX 31 +#define PIO_PB0_IDX 32 +#define PIO_PB1_IDX 33 +#define PIO_PB2_IDX 34 +#define PIO_PB3_IDX 35 +#define PIO_PB4_IDX 36 +#define PIO_PB5_IDX 37 +#define PIO_PB6_IDX 38 +#define PIO_PB7_IDX 39 +#define PIO_PB8_IDX 40 +#define PIO_PB9_IDX 41 +#define PIO_PB10_IDX 42 +#define PIO_PB11_IDX 43 +#define PIO_PB12_IDX 44 +#define PIO_PB13_IDX 45 +#define PIO_PB14_IDX 46 +#define PIO_PC0_IDX 64 +#define PIO_PC1_IDX 65 +#define PIO_PC2_IDX 66 +#define PIO_PC3_IDX 67 +#define PIO_PC4_IDX 68 +#define PIO_PC5_IDX 69 +#define PIO_PC6_IDX 70 +#define PIO_PC7_IDX 71 +#define PIO_PC8_IDX 72 +#define PIO_PC9_IDX 73 +#define PIO_PC10_IDX 74 +#define PIO_PC11_IDX 75 +#define PIO_PC12_IDX 76 +#define PIO_PC13_IDX 77 +#define PIO_PC14_IDX 78 +#define PIO_PC15_IDX 79 +#define PIO_PC16_IDX 80 +#define PIO_PC17_IDX 81 +#define PIO_PC18_IDX 82 +#define PIO_PC19_IDX 83 +#define PIO_PC20_IDX 84 +#define PIO_PC21_IDX 85 +#define PIO_PC22_IDX 86 +#define PIO_PC23_IDX 87 +#define PIO_PC24_IDX 88 +#define PIO_PC25_IDX 89 +#define PIO_PC26_IDX 90 +#define PIO_PC27_IDX 91 +#define PIO_PC28_IDX 92 +#define PIO_PC29_IDX 93 +#define PIO_PC30_IDX 94 +#define PIO_PC31_IDX 95 + +#endif /* _SAM4S16C_PIO_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/sam4s.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/sam4s.h new file mode 100644 index 0000000..73ee62b --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/sam4s.h
@@ -0,0 +1,55 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S_ +#define _SAM4S_ + +#if defined __SAM4S8B__ + #include "sam4s8b.h" +#elif defined __SAM4S8C__ + #include "sam4s8c.h" +#elif defined __SAM4S16B__ + #include "sam4s16b.h" +#elif defined __SAM4S16C__ + #include "sam4s16c.h" +#else + #error Library does not support the specified device. +#endif + +#endif /* _SAM4S_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/sam4s16c.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/sam4s16c.h new file mode 100644 index 0000000..e4173b2 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/include/sam4s16c.h
@@ -0,0 +1,519 @@ +/** + * \file + * + * Copyright (c) 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM4S16C_ +#define _SAM4S16C_ + +/** \addtogroup SAM4S16C_definitions SAM4S16C definitions + This file defines all structures and symbols for SAM4S16C: + - registers and bitfields + - peripheral base address + - peripheral ID + - PIO definitions +*/ +/*@{*/ + +#ifdef __cplusplus + extern "C" { +#endif + +#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#include <stdint.h> +#ifndef __cplusplus +typedef volatile const uint32_t RoReg; /**< Read only 32-bit register (volatile const unsigned int) */ +#else +typedef volatile uint32_t RoReg; /**< Read only 32-bit register (volatile const unsigned int) */ +#endif +typedef volatile uint32_t WoReg; /**< Write only 32-bit register (volatile unsigned int) */ +typedef volatile uint32_t RwReg; /**< Read-Write 32-bit register (volatile unsigned int) */ +#endif + +/* ************************************************************************** */ +/* CMSIS DEFINITIONS FOR SAM4S16C */ +/* ************************************************************************** */ +/** \addtogroup SAM4S16C_cmsis CMSIS Definitions */ +/*@{*/ + +/**< Interrupt Number Definition */ +typedef enum IRQn +{ +/****** Cortex-M4 Processor Exceptions Numbers ******************************/ + NonMaskableInt_IRQn = -14, /**< 2 Non Maskable Interrupt */ + MemoryManagement_IRQn = -12, /**< 4 Cortex-M4 Memory Management Interrupt */ + BusFault_IRQn = -11, /**< 5 Cortex-M4 Bus Fault Interrupt */ + UsageFault_IRQn = -10, /**< 6 Cortex-M4 Usage Fault Interrupt */ + SVCall_IRQn = -5, /**< 11 Cortex-M4 SV Call Interrupt */ + DebugMonitor_IRQn = -4, /**< 12 Cortex-M4 Debug Monitor Interrupt */ + PendSV_IRQn = -2, /**< 14 Cortex-M4 Pend SV Interrupt */ + SysTick_IRQn = -1, /**< 15 Cortex-M4 System Tick Interrupt */ +/****** SAM4S16C specific Interrupt Numbers *********************************/ + + SUPC_IRQn = 0, /**< 0 SAM4S16C Supply Controller (SUPC) */ + RSTC_IRQn = 1, /**< 1 SAM4S16C Reset Controller (RSTC) */ + RTC_IRQn = 2, /**< 2 SAM4S16C Real Time Clock (RTC) */ + RTT_IRQn = 3, /**< 3 SAM4S16C Real Time Timer (RTT) */ + WDT_IRQn = 4, /**< 4 SAM4S16C Watchdog Timer (WDT) */ + PMC_IRQn = 5, /**< 5 SAM4S16C Power Management Controller (PMC) */ + EFC_IRQn = 6, /**< 6 SAM4S16C Enhanced Embedded Flash Controller (EFC) */ + UART0_IRQn = 8, /**< 8 SAM4S16C UART 0 (UART0) */ + UART1_IRQn = 9, /**< 9 SAM4S16C UART 1 (UART1) */ + SMC_IRQn = 10, /**< 10 SAM4S16C Static Memory Controller (SMC) */ + PIOA_IRQn = 11, /**< 11 SAM4S16C Parallel I/O Controller A (PIOA) */ + PIOB_IRQn = 12, /**< 12 SAM4S16C Parallel I/O Controller B (PIOB) */ + PIOC_IRQn = 13, /**< 13 SAM4S16C Parallel I/O Controller C (PIOC) */ + USART0_IRQn = 14, /**< 14 SAM4S16C USART 0 (USART0) */ + USART1_IRQn = 15, /**< 15 SAM4S16C USART 1 (USART1) */ + HSMCI_IRQn = 18, /**< 18 SAM4S16C Multimedia Card Interface (HSMCI) */ + TWI0_IRQn = 19, /**< 19 SAM4S16C Two Wire Interface 0 (TWI0) */ + TWI1_IRQn = 20, /**< 20 SAM4S16C Two Wire Interface 1 (TWI1) */ + SPI_IRQn = 21, /**< 21 SAM4S16C Serial Peripheral Interface (SPI) */ + SSC_IRQn = 22, /**< 22 SAM4S16C Synchronous Serial Controller (SSC) */ + TC0_IRQn = 23, /**< 23 SAM4S16C Timer/Counter 0 (TC0) */ + TC1_IRQn = 24, /**< 24 SAM4S16C Timer/Counter 1 (TC1) */ + TC2_IRQn = 25, /**< 25 SAM4S16C Timer/Counter 2 (TC2) */ + TC3_IRQn = 26, /**< 26 SAM4S16C Timer/Counter 3 (TC3) */ + TC4_IRQn = 27, /**< 27 SAM4S16C Timer/Counter 4 (TC4) */ + TC5_IRQn = 28, /**< 28 SAM4S16C Timer/Counter 5 (TC5) */ + ADC_IRQn = 29, /**< 29 SAM4S16C Analog To Digital Converter (ADC) */ + DACC_IRQn = 30, /**< 30 SAM4S16C Digital To Analog Converter (DACC) */ + PWM_IRQn = 31, /**< 31 SAM4S16C Pulse Width Modulation (PWM) */ + CRCCU_IRQn = 32, /**< 32 SAM4S16C CRC Calculation Unit (CRCCU) */ + ACC_IRQn = 33, /**< 33 SAM4S16C Analog Comparator (ACC) */ + UDP_IRQn = 34 /**< 34 SAM4S16C USB Device Port (UDP) */ +} IRQn_Type; + +typedef struct _DeviceVectors +{ + /* Stack pointer */ + void* pvStack; + + /* Cortex-M handlers */ + void* pfnReset_Handler; + void* pfnNMI_Handler; + void* pfnHardFault_Handler; + void* pfnMemManage_Handler; + void* pfnBusFault_Handler; + void* pfnUsageFault_Handler; + void* pfnReserved1_Handler; + void* pfnReserved2_Handler; + void* pfnReserved3_Handler; + void* pfnReserved4_Handler; + void* pfnSVC_Handler; + void* pfnDebugMon_Handler; + void* pfnReserved5_Handler; + void* pfnPendSV_Handler; + void* pfnSysTick_Handler; + + /* Peripheral handlers */ + void* pfnSUPC_Handler; /* 0 Supply Controller */ + void* pfnRSTC_Handler; /* 1 Reset Controller */ + void* pfnRTC_Handler; /* 2 Real Time Clock */ + void* pfnRTT_Handler; /* 3 Real Time Timer */ + void* pfnWDT_Handler; /* 4 Watchdog Timer */ + void* pfnPMC_Handler; /* 5 Power Management Controller */ + void* pfnEFC_Handler; /* 6 Enhanced Embedded Flash Controller */ + void* pvReserved7; + void* pfnUART0_Handler; /* 8 UART 0 */ + void* pfnUART1_Handler; /* 9 UART 1 */ + void* pfnSMC_Handler; /* 10 Static Memory Controller */ + void* pfnPIOA_Handler; /* 11 Parallel I/O Controller A */ + void* pfnPIOB_Handler; /* 12 Parallel I/O Controller B */ + void* pfnPIOC_Handler; /* 13 Parallel I/O Controller C */ + void* pfnUSART0_Handler; /* 14 USART 0 */ + void* pfnUSART1_Handler; /* 15 USART 1 */ + void* pvReserved16; + void* pvReserved17; + void* pfnHSMCI_Handler; /* 18 Multimedia Card Interface */ + void* pfnTWI0_Handler; /* 19 Two Wire Interface 0 */ + void* pfnTWI1_Handler; /* 20 Two Wire Interface 1 */ + void* pfnSPI_Handler; /* 21 Serial Peripheral Interface */ + void* pfnSSC_Handler; /* 22 Synchronous Serial Controller */ + void* pfnTC0_Handler; /* 23 Timer/Counter 0 */ + void* pfnTC1_Handler; /* 24 Timer/Counter 1 */ + void* pfnTC2_Handler; /* 25 Timer/Counter 2 */ + void* pfnTC3_Handler; /* 26 Timer/Counter 3 */ + void* pfnTC4_Handler; /* 27 Timer/Counter 4 */ + void* pfnTC5_Handler; /* 28 Timer/Counter 5 */ + void* pfnADC_Handler; /* 29 Analog To Digital Converter */ + void* pfnDACC_Handler; /* 30 Digital To Analog Converter */ + void* pfnPWM_Handler; /* 31 Pulse Width Modulation */ + void* pfnCRCCU_Handler; /* 32 CRC Calculation Unit */ + void* pfnACC_Handler; /* 33 Analog Comparator */ + void* pfnUDP_Handler; /* 34 USB Device Port */ +} DeviceVectors; + +/* Cortex-M4 core handlers */ +void Reset_Handler ( void ); +void NMI_Handler ( void ); +void HardFault_Handler ( void ); +void MemManage_Handler ( void ); +void BusFault_Handler ( void ); +void UsageFault_Handler ( void ); +void SVC_Handler ( void ); +void DebugMon_Handler ( void ); +void PendSV_Handler ( void ); +void SysTick_Handler ( void ); + +/* Peripherals handlers */ +void ACC_Handler ( void ); +void ADC_Handler ( void ); +void CRCCU_Handler ( void ); +void DACC_Handler ( void ); +void EFC_Handler ( void ); +void HSMCI_Handler ( void ); +void PIOA_Handler ( void ); +void PIOB_Handler ( void ); +void PIOC_Handler ( void ); +void PMC_Handler ( void ); +void PWM_Handler ( void ); +void RSTC_Handler ( void ); +void RTC_Handler ( void ); +void RTT_Handler ( void ); +void SMC_Handler ( void ); +void SPI_Handler ( void ); +void SSC_Handler ( void ); +void SUPC_Handler ( void ); +void TC0_Handler ( void ); +void TC1_Handler ( void ); +void TC2_Handler ( void ); +void TC3_Handler ( void ); +void TC4_Handler ( void ); +void TC5_Handler ( void ); +void TWI0_Handler ( void ); +void TWI1_Handler ( void ); +void UART0_Handler ( void ); +void UART1_Handler ( void ); +void UDP_Handler ( void ); +void USART0_Handler ( void ); +void USART1_Handler ( void ); +void WDT_Handler ( void ); + +/** + * \brief Configuration of the Cortex-M4 Processor and Core Peripherals + */ + +#define __CM4_REV 0x0000 /**< SAM4S16C core revision number ([15:8] revision number, [7:0] patch number) */ +#define __MPU_PRESENT 1 /**< SAM4S16C does provide a MPU */ +#define __FPU_PRESENT 0 /**< SAM4S16C does not provide a FPU */ +#define __NVIC_PRIO_BITS 4 /**< SAM4S16C uses 4 Bits for the Priority Levels */ +#define __Vendor_SysTickConfig 0 /**< Set to 1 if different SysTick Config is used */ + +/* + * \brief CMSIS includes + */ + +#include <core_cm4.h> +#if !defined DONT_USE_CMSIS_INIT +#include "system_sam4s.h" +#endif /* DONT_USE_CMSIS_INIT */ + +/*@}*/ + +/* ************************************************************************** */ +/** SOFTWARE PERIPHERAL API DEFINITION FOR SAM4S16C */ +/* ************************************************************************** */ +/** \addtogroup SAM4S16C_api Peripheral Software API */ +/*@{*/ + +#include "component/component_acc.h" +#include "component/component_adc.h" +#include "component/component_chipid.h" +#include "component/component_crccu.h" +#include "component/component_dacc.h" +#include "component/component_efc.h" +#include "component/component_gpbr.h" +#include "component/component_hsmci.h" +#include "component/component_matrix.h" +#include "component/component_pdc.h" +#include "component/component_pio.h" +#include "component/component_pmc.h" +#include "component/component_pwm.h" +#include "component/component_rstc.h" +#include "component/component_rtc.h" +#include "component/component_rtt.h" +#include "component/component_smc.h" +#include "component/component_spi.h" +#include "component/component_ssc.h" +#include "component/component_supc.h" +#include "component/component_tc.h" +#include "component/component_twi.h" +#include "component/component_uart.h" +#include "component/component_udp.h" +#include "component/component_usart.h" +#include "component/component_wdt.h" +/*@}*/ + +/* ************************************************************************** */ +/* REGISTER ACCESS DEFINITIONS FOR SAM4S16C */ +/* ************************************************************************** */ +/** \addtogroup SAM4S16C_reg Registers Access Definitions */ +/*@{*/ + +#include "instance/instance_hsmci.h" +#include "instance/instance_ssc.h" +#include "instance/instance_spi.h" +#include "instance/instance_tc0.h" +#include "instance/instance_tc1.h" +#include "instance/instance_twi0.h" +#include "instance/instance_twi1.h" +#include "instance/instance_pwm.h" +#include "instance/instance_usart0.h" +#include "instance/instance_usart1.h" +#include "instance/instance_udp.h" +#include "instance/instance_adc.h" +#include "instance/instance_dacc.h" +#include "instance/instance_acc.h" +#include "instance/instance_crccu.h" +#include "instance/instance_smc.h" +#include "instance/instance_matrix.h" +#include "instance/instance_pmc.h" +#include "instance/instance_uart0.h" +#include "instance/instance_chipid.h" +#include "instance/instance_uart1.h" +#include "instance/instance_efc.h" +#include "instance/instance_pioa.h" +#include "instance/instance_piob.h" +#include "instance/instance_pioc.h" +#include "instance/instance_rstc.h" +#include "instance/instance_supc.h" +#include "instance/instance_rtt.h" +#include "instance/instance_wdt.h" +#include "instance/instance_rtc.h" +#include "instance/instance_gpbr.h" +/*@}*/ + +/* ************************************************************************** */ +/* PERIPHERAL ID DEFINITIONS FOR SAM4S16C */ +/* ************************************************************************** */ +/** \addtogroup SAM4S16C_id Peripheral Ids Definitions */ +/*@{*/ + +#define ID_SUPC ( 0) /**< \brief Supply Controller (SUPC) */ +#define ID_RSTC ( 1) /**< \brief Reset Controller (RSTC) */ +#define ID_RTC ( 2) /**< \brief Real Time Clock (RTC) */ +#define ID_RTT ( 3) /**< \brief Real Time Timer (RTT) */ +#define ID_WDT ( 4) /**< \brief Watchdog Timer (WDT) */ +#define ID_PMC ( 5) /**< \brief Power Management Controller (PMC) */ +#define ID_EFC ( 6) /**< \brief Enhanced Embedded Flash Controller (EFC) */ +#define ID_UART0 ( 8) /**< \brief UART 0 (UART0) */ +#define ID_UART1 ( 9) /**< \brief UART 1 (UART1) */ +#define ID_SMC (10) /**< \brief Static Memory Controller (SMC) */ +#define ID_PIOA (11) /**< \brief Parallel I/O Controller A (PIOA) */ +#define ID_PIOB (12) /**< \brief Parallel I/O Controller B (PIOB) */ +#define ID_PIOC (13) /**< \brief Parallel I/O Controller C (PIOC) */ +#define ID_USART0 (14) /**< \brief USART 0 (USART0) */ +#define ID_USART1 (15) /**< \brief USART 1 (USART1) */ +#define ID_HSMCI (18) /**< \brief Multimedia Card Interface (HSMCI) */ +#define ID_TWI0 (19) /**< \brief Two Wire Interface 0 (TWI0) */ +#define ID_TWI1 (20) /**< \brief Two Wire Interface 1 (TWI1) */ +#define ID_SPI (21) /**< \brief Serial Peripheral Interface (SPI) */ +#define ID_SSC (22) /**< \brief Synchronous Serial Controller (SSC) */ +#define ID_TC0 (23) /**< \brief Timer/Counter 0 (TC0) */ +#define ID_TC1 (24) /**< \brief Timer/Counter 1 (TC1) */ +#define ID_TC2 (25) /**< \brief Timer/Counter 2 (TC2) */ +#define ID_TC3 (26) /**< \brief Timer/Counter 3 (TC3) */ +#define ID_TC4 (27) /**< \brief Timer/Counter 4 (TC4) */ +#define ID_TC5 (28) /**< \brief Timer/Counter 5 (TC5) */ +#define ID_ADC (29) /**< \brief Analog To Digital Converter (ADC) */ +#define ID_DACC (30) /**< \brief Digital To Analog Converter (DACC) */ +#define ID_PWM (31) /**< \brief Pulse Width Modulation (PWM) */ +#define ID_CRCCU (32) /**< \brief CRC Calculation Unit (CRCCU) */ +#define ID_ACC (33) /**< \brief Analog Comparator (ACC) */ +#define ID_UDP (34) /**< \brief USB Device Port (UDP) */ +/*@}*/ + +/* ************************************************************************** */ +/* BASE ADDRESS DEFINITIONS FOR SAM4S16C */ +/* ************************************************************************** */ +/** \addtogroup SAM4S16C_base Peripheral Base Address Definitions */ +/*@{*/ + +#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) +#define HSMCI (0x40000000U) /**< \brief (HSMCI ) Base Address */ +#define PDC_HSMCI (0x40000100U) /**< \brief (PDC_HSMCI ) Base Address */ +#define SSC (0x40004000U) /**< \brief (SSC ) Base Address */ +#define PDC_SSC (0x40004100U) /**< \brief (PDC_SSC ) Base Address */ +#define SPI (0x40008000U) /**< \brief (SPI ) Base Address */ +#define PDC_SPI (0x40008100U) /**< \brief (PDC_SPI ) Base Address */ +#define TC0 (0x40010000U) /**< \brief (TC0 ) Base Address */ +#define TC1 (0x40014000U) /**< \brief (TC1 ) Base Address */ +#define TWI0 (0x40018000U) /**< \brief (TWI0 ) Base Address */ +#define PDC_TWI0 (0x40018100U) /**< \brief (PDC_TWI0 ) Base Address */ +#define TWI1 (0x4001C000U) /**< \brief (TWI1 ) Base Address */ +#define PDC_TWI1 (0x4001C100U) /**< \brief (PDC_TWI1 ) Base Address */ +#define PWM (0x40020000U) /**< \brief (PWM ) Base Address */ +#define PDC_PWM (0x40020100U) /**< \brief (PDC_PWM ) Base Address */ +#define USART0 (0x40024000U) /**< \brief (USART0 ) Base Address */ +#define PDC_USART0 (0x40024100U) /**< \brief (PDC_USART0) Base Address */ +#define USART1 (0x40028000U) /**< \brief (USART1 ) Base Address */ +#define PDC_USART1 (0x40028100U) /**< \brief (PDC_USART1) Base Address */ +#define UDP (0x40034000U) /**< \brief (UDP ) Base Address */ +#define ADC (0x40038000U) /**< \brief (ADC ) Base Address */ +#define PDC_ADC (0x40038100U) /**< \brief (PDC_ADC ) Base Address */ +#define DACC (0x4003C000U) /**< \brief (DACC ) Base Address */ +#define PDC_DACC (0x4003C100U) /**< \brief (PDC_DACC ) Base Address */ +#define ACC (0x40040000U) /**< \brief (ACC ) Base Address */ +#define CRCCU (0x40044000U) /**< \brief (CRCCU ) Base Address */ +#define SMC (0x400E0000U) /**< \brief (SMC ) Base Address */ +#define MATRIX (0x400E0200U) /**< \brief (MATRIX ) Base Address */ +#define PMC (0x400E0400U) /**< \brief (PMC ) Base Address */ +#define UART0 (0x400E0600U) /**< \brief (UART0 ) Base Address */ +#define PDC_UART0 (0x400E0700U) /**< \brief (PDC_UART0 ) Base Address */ +#define CHIPID (0x400E0740U) /**< \brief (CHIPID ) Base Address */ +#define UART1 (0x400E0800U) /**< \brief (UART1 ) Base Address */ +#define PDC_UART1 (0x400E0900U) /**< \brief (PDC_UART1 ) Base Address */ +#define EFC (0x400E0A00U) /**< \brief (EFC ) Base Address */ +#define PIOA (0x400E0E00U) /**< \brief (PIOA ) Base Address */ +#define PDC_PIOA (0x400E0F68U) /**< \brief (PDC_PIOA ) Base Address */ +#define PIOB (0x400E1000U) /**< \brief (PIOB ) Base Address */ +#define PIOC (0x400E1200U) /**< \brief (PIOC ) Base Address */ +#define RSTC (0x400E1400U) /**< \brief (RSTC ) Base Address */ +#define SUPC (0x400E1410U) /**< \brief (SUPC ) Base Address */ +#define RTT (0x400E1430U) /**< \brief (RTT ) Base Address */ +#define WDT (0x400E1450U) /**< \brief (WDT ) Base Address */ +#define RTC (0x400E1460U) /**< \brief (RTC ) Base Address */ +#define GPBR (0x400E1490U) /**< \brief (GPBR ) Base Address */ +#else +#define HSMCI ((Hsmci *)0x40000000U) /**< \brief (HSMCI ) Base Address */ +#define PDC_HSMCI ((Pdc *)0x40000100U) /**< \brief (PDC_HSMCI ) Base Address */ +#define SSC ((Ssc *)0x40004000U) /**< \brief (SSC ) Base Address */ +#define PDC_SSC ((Pdc *)0x40004100U) /**< \brief (PDC_SSC ) Base Address */ +#define SPI ((Spi *)0x40008000U) /**< \brief (SPI ) Base Address */ +#define PDC_SPI ((Pdc *)0x40008100U) /**< \brief (PDC_SPI ) Base Address */ +#define TC0 ((Tc *)0x40010000U) /**< \brief (TC0 ) Base Address */ +#define TC1 ((Tc *)0x40014000U) /**< \brief (TC1 ) Base Address */ +#define TWI0 ((Twi *)0x40018000U) /**< \brief (TWI0 ) Base Address */ +#define PDC_TWI0 ((Pdc *)0x40018100U) /**< \brief (PDC_TWI0 ) Base Address */ +#define TWI1 ((Twi *)0x4001C000U) /**< \brief (TWI1 ) Base Address */ +#define PDC_TWI1 ((Pdc *)0x4001C100U) /**< \brief (PDC_TWI1 ) Base Address */ +#define PWM ((Pwm *)0x40020000U) /**< \brief (PWM ) Base Address */ +#define PDC_PWM ((Pdc *)0x40020100U) /**< \brief (PDC_PWM ) Base Address */ +#define USART0 ((Usart *)0x40024000U) /**< \brief (USART0 ) Base Address */ +#define PDC_USART0 ((Pdc *)0x40024100U) /**< \brief (PDC_USART0) Base Address */ +#define USART1 ((Usart *)0x40028000U) /**< \brief (USART1 ) Base Address */ +#define PDC_USART1 ((Pdc *)0x40028100U) /**< \brief (PDC_USART1) Base Address */ +#define UDP ((Udp *)0x40034000U) /**< \brief (UDP ) Base Address */ +#define ADC ((Adc *)0x40038000U) /**< \brief (ADC ) Base Address */ +#define PDC_ADC ((Pdc *)0x40038100U) /**< \brief (PDC_ADC ) Base Address */ +#define DACC ((Dacc *)0x4003C000U) /**< \brief (DACC ) Base Address */ +#define PDC_DACC ((Pdc *)0x4003C100U) /**< \brief (PDC_DACC ) Base Address */ +#define ACC ((Acc *)0x40040000U) /**< \brief (ACC ) Base Address */ +#define CRCCU ((Crccu *)0x40044000U) /**< \brief (CRCCU ) Base Address */ +#define SMC ((Smc *)0x400E0000U) /**< \brief (SMC ) Base Address */ +#define MATRIX ((Matrix *)0x400E0200U) /**< \brief (MATRIX ) Base Address */ +#define PMC ((Pmc *)0x400E0400U) /**< \brief (PMC ) Base Address */ +#define UART0 ((Uart *)0x400E0600U) /**< \brief (UART0 ) Base Address */ +#define PDC_UART0 ((Pdc *)0x400E0700U) /**< \brief (PDC_UART0 ) Base Address */ +#define CHIPID ((Chipid *)0x400E0740U) /**< \brief (CHIPID ) Base Address */ +#define UART1 ((Uart *)0x400E0800U) /**< \brief (UART1 ) Base Address */ +#define PDC_UART1 ((Pdc *)0x400E0900U) /**< \brief (PDC_UART1 ) Base Address */ +#define EFC ((Efc *)0x400E0A00U) /**< \brief (EFC ) Base Address */ +#define PIOA ((Pio *)0x400E0E00U) /**< \brief (PIOA ) Base Address */ +#define PDC_PIOA ((Pdc *)0x400E0F68U) /**< \brief (PDC_PIOA ) Base Address */ +#define PIOB ((Pio *)0x400E1000U) /**< \brief (PIOB ) Base Address */ +#define PIOC ((Pio *)0x400E1200U) /**< \brief (PIOC ) Base Address */ +#define RSTC ((Rstc *)0x400E1400U) /**< \brief (RSTC ) Base Address */ +#define SUPC ((Supc *)0x400E1410U) /**< \brief (SUPC ) Base Address */ +#define RTT ((Rtt *)0x400E1430U) /**< \brief (RTT ) Base Address */ +#define WDT ((Wdt *)0x400E1450U) /**< \brief (WDT ) Base Address */ +#define RTC ((Rtc *)0x400E1460U) /**< \brief (RTC ) Base Address */ +#define GPBR ((Gpbr *)0x400E1490U) /**< \brief (GPBR ) Base Address */ +#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ +/*@}*/ + +/* ************************************************************************** */ +/* PIO DEFINITIONS FOR SAM4S16C */ +/* ************************************************************************** */ +/** \addtogroup SAM4S16C_pio Peripheral Pio Definitions */ +/*@{*/ + +#include "pio/pio_sam4s16c.h" +/*@}*/ + +/* ************************************************************************** */ +/* MEMORY MAPPING DEFINITIONS FOR SAM4S16C */ +/* ************************************************************************** */ + +#define IFLASH_SIZE (0x100000u) +#define IFLASH_PAGE_SIZE (512u) +#define IFLASH_LOCK_REGION_SIZE (8192u) +#define IFLASH_NB_OF_PAGES (2048u) +#define IFLASH_NB_OF_LOCK_BITS (128u) +#define IRAM_SIZE (0x20000u) + +#define IFLASH_ADDR (0x00400000u) /**< Internal Flash base address */ +#define IROM_ADDR (0x00800000u) /**< Internal ROM base address */ +#define IRAM_ADDR (0x20000000u) /**< Internal RAM base address */ +#define EBI_CS0_ADDR (0x60000000u) /**< EBI Chip Select 0 base address */ +#define EBI_CS1_ADDR (0x61000000u) /**< EBI Chip Select 1 base address */ +#define EBI_CS2_ADDR (0x62000000u) /**< EBI Chip Select 2 base address */ +#define EBI_CS3_ADDR (0x63000000u) /**< EBI Chip Select 3 base address */ + +/* ************************************************************************** */ +/* ELECTRICAL DEFINITIONS FOR SAM4S16C */ +/* ************************************************************************** */ + +/* Device characteristics */ +#define CHIP_FREQ_SLCK_RC_MIN (20000UL) +#define CHIP_FREQ_SLCK_RC (32000UL) +#define CHIP_FREQ_SLCK_RC_MAX (44000UL) +#define CHIP_FREQ_MAINCK_RC_4MHZ (4000000UL) +#define CHIP_FREQ_MAINCK_RC_8MHZ (8000000UL) +#define CHIP_FREQ_MAINCK_RC_12MHZ (12000000UL) +#define CHIP_FREQ_CPU_MAX (120000000UL) +#define CHIP_FREQ_XTAL_32K (32768UL) +#define CHIP_FREQ_XTAL_12M (12000000UL) + +/* Embedded Flash Write Wait State */ +#define CHIP_FLASH_WRITE_WAIT_STATE (6U) + +/* Embedded Flash Read Wait State (VDDCORE set at 1.65V) */ +#define CHIP_FREQ_FWS_0 (20000000UL) /**< \brief Maximum operating frequency when FWS is 0 */ +#define CHIP_FREQ_FWS_1 (40000000UL) /**< \brief Maximum operating frequency when FWS is 1 */ +#define CHIP_FREQ_FWS_2 (60000000UL) /**< \brief Maximum operating frequency when FWS is 2 */ +#define CHIP_FREQ_FWS_3 (80000000UL) /**< \brief Maximum operating frequency when FWS is 3 */ +#define CHIP_FREQ_FWS_4 (100000000UL) /**< \brief Maximum operating frequency when FWS is 4 */ + +#ifdef __cplusplus +} +#endif + +/*@}*/ + +#endif /* _SAM4S16C_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/source/templates/exceptions.c b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/source/templates/exceptions.c new file mode 100644 index 0000000..1d7db4f --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/source/templates/exceptions.c
@@ -0,0 +1,173 @@ +/** + * \file + * + * \brief This file contains the default exception handlers. + * + * Copyright (c) 2011 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + * \par Purpose + * + * This file provides basic support for Cortex-M processor based + * microcontrollers. + * + * \note + * The exception handler has weak aliases. + * As they are weak aliases, any function with the same name will override + * this definition. + * + */ + +#include "exceptions.h" + +/* @cond 0 */ +/**INDENT-OFF**/ +#ifdef __cplusplus +extern "C" { +#endif +/**INDENT-ON**/ +/* @endcond */ + +#ifdef __GNUC__ +/* Cortex-M3 core handlers */ +void Reset_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void NMI_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void HardFault_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void MemManage_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void BusFault_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void UsageFault_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void SVC_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void DebugMon_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void PendSV_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void SysTick_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); + +/* Peripherals handlers */ +void ACC_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void ADC_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void CRCCU_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void DACC_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void EFC_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void HSMCI_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void PIOA_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void PIOB_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void PIOC_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void PMC_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void PWM_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void RSTC_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void RTC_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void RTT_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void SMC_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void SPI_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void SSC_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void SUPC_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void TC0_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void TC1_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void TC2_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void TC3_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void TC4_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void TC5_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void TWI0_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void TWI1_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void UART0_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void UART1_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void USART0_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void USART1_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void UDP_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +void WDT_Handler(void) __attribute__ ((weak, alias("Dummy_Handler"))); +#endif /* __GNUC__ */ + +#ifdef __ICCARM__ +/* Cortex-M3 core handlers */ +#pragma weak Reset_Handler=Dummy_Handler +#pragma weak NMI_Handler=Dummy_Handler +#pragma weak HardFault_Handler=Dummy_Handler +#pragma weak MemManage_Handler=Dummy_Handler +#pragma weak BusFault_Handler=Dummy_Handler +#pragma weak UsageFault_Handler=Dummy_Handler +#pragma weak SVC_Handler=Dummy_Handler +#pragma weak DebugMon_Handler=Dummy_Handler +#pragma weak PendSV_Handler=Dummy_Handler +#pragma weak SysTick_Handler=Dummy_Handler + +/* Peripherals handlers */ +#pragma weak ACC_Handler=Dummy_Handler +#pragma weak ADC_Handler=Dummy_Handler +#pragma weak CRCCU_Handler=Dummy_Handler +#pragma weak DACC_Handler=Dummy_Handler +#pragma weak EFC_Handler=Dummy_Handler +#pragma weak HSMCI_Handler=Dummy_Handler +#pragma weak PIOA_Handler=Dummy_Handler +#pragma weak PIOB_Handler=Dummy_Handler +#pragma weak PIOC_Handler=Dummy_Handler +#pragma weak PMC_Handler=Dummy_Handler +#pragma weak PWM_Handler=Dummy_Handler +#pragma weak RSTC_Handler=Dummy_Handler +#pragma weak RTC_Handler=Dummy_Handler +#pragma weak RTT_Handler=Dummy_Handler +#pragma weak SMC_Handler=Dummy_Handler +#pragma weak SPI_Handler=Dummy_Handler +#pragma weak SSC_Handler=Dummy_Handler +#pragma weak SUPC_Handler=Dummy_Handler +#pragma weak TC0_Handler=Dummy_Handler +#pragma weak TC1_Handler=Dummy_Handler +#pragma weak TC2_Handler=Dummy_Handler +#pragma weak TC3_Handler=Dummy_Handler +#pragma weak TC4_Handler=Dummy_Handler +#pragma weak TC5_Handler=Dummy_Handler +#pragma weak TWI0_Handler=Dummy_Handler +#pragma weak TWI1_Handler=Dummy_Handler +#pragma weak UART0_Handler=Dummy_Handler +#pragma weak UART1_Handler=Dummy_Handler +#pragma weak USART0_Handler=Dummy_Handler +#pragma weak USART1_Handler=Dummy_Handler +#pragma weak UDP_Handler=Dummy_Handler +#pragma weak WDT_Handler=Dummy_Handler +#endif /* __ICCARM__ */ + +/** + * \brief Default interrupt handler for unused IRQs. + */ +void Dummy_Handler(void) +{ + while (1) { + } +} + +/* @cond 0 */ +/**INDENT-OFF**/ +#ifdef __cplusplus +} +#endif +/**INDENT-ON**/ +/* @endcond */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/source/templates/exceptions.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/source/templates/exceptions.h new file mode 100644 index 0000000..a02888b --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/source/templates/exceptions.h
@@ -0,0 +1,69 @@ +/** + * \file + * + * \brief This file contains the interface for default exception handlers. + * + * Copyright (c) 2011 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef EXCEPTIONS_H_INCLUDED +#define EXCEPTIONS_H_INCLUDED + +#include "sam4s.h" + +/* @cond 0 */ +/**INDENT-OFF**/ +#ifdef __cplusplus +extern "C" { +#endif +/**INDENT-ON**/ +/* @endcond */ + +/* Function prototype for exception table items (interrupt handler). */ +typedef void (*IntFunc) (void); + +/* Default empty handler */ +void Dummy_Handler(void); + +/* @cond 0 */ +/**INDENT-OFF**/ +#ifdef __cplusplus +} +#endif +/**INDENT-ON**/ +/* @endcond */ + +#endif /* EXCEPTIONS_H_INCLUDED */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/source/templates/gcc/startup_sam4s.c b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/source/templates/gcc/startup_sam4s.c new file mode 100644 index 0000000..a1213bf --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/source/templates/gcc/startup_sam4s.c
@@ -0,0 +1,165 @@ +/** + * \file + * + * \brief Startup file for SAM4S. + * + * Copyright (c) 2011 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#include "exceptions.h" +#include "sam4s.h" +#include "system_sam4s.h" + +/* Initialize segments */ +extern uint32_t _sfixed; +extern uint32_t _efixed; +extern uint32_t _etext; +extern uint32_t _srelocate; +extern uint32_t _erelocate; +extern uint32_t _szero; +extern uint32_t _ezero; +extern uint32_t _sstack; +extern uint32_t _estack; + +/** \cond DOXYGEN_SHOULD_SKIP_THIS */ +int main(void); +/** \endcond */ + +void __libc_init_array(void); + +/* Exception Table */ +__attribute__ ((section(".vectors"))) +IntFunc exception_table[] = { + + /* Configure Initial Stack Pointer, using linker-generated symbols */ + (IntFunc) (&_estack), + Reset_Handler, + + NMI_Handler, + HardFault_Handler, + MemManage_Handler, + BusFault_Handler, + UsageFault_Handler, + 0, 0, 0, 0, /* Reserved */ + SVC_Handler, + DebugMon_Handler, + 0, /* Reserved */ + PendSV_Handler, + SysTick_Handler, + + /* Configurable interrupts */ + SUPC_Handler, /* 0 Supply Controller */ + RSTC_Handler, /* 1 Reset Controller */ + RTC_Handler, /* 2 Real Time Clock */ + RTT_Handler, /* 3 Real Time Timer */ + WDT_Handler, /* 4 Watchdog Timer */ + PMC_Handler, /* 5 PMC */ + EFC_Handler, /* 6 EFC */ + Dummy_Handler, /* 7 Reserved */ + UART0_Handler, /* 8 UART0 */ + UART1_Handler, /* 9 UART1 */ + SMC_Handler, /* 10 SMC */ + PIOA_Handler, /* 11 Parallel IO Controller A */ + PIOB_Handler, /* 12 Parallel IO Controller B */ + PIOC_Handler, /* 13 Parallel IO Controller C */ + USART0_Handler, /* 14 USART 0 */ + USART1_Handler, /* 15 USART 1 */ + Dummy_Handler, /* 16 Reserved */ + Dummy_Handler, /* 17 Reserved */ + HSMCI_Handler, /* 18 HSMCI */ + TWI0_Handler, /* 19 TWI 0 */ + TWI1_Handler, /* 20 TWI 1 */ + SPI_Handler, /* 21 SPI */ + SSC_Handler, /* 22 SSC */ + TC0_Handler, /* 23 Timer Counter 0 */ + TC1_Handler, /* 24 Timer Counter 1 */ + TC2_Handler, /* 25 Timer Counter 2 */ + TC3_Handler, /* 26 Timer Counter 3 */ + TC4_Handler, /* 27 Timer Counter 4 */ + TC5_Handler, /* 28 Timer Counter 5 */ + ADC_Handler, /* 29 ADC controller */ + DACC_Handler, /* 30 DACC controller */ + PWM_Handler, /* 31 PWM */ + CRCCU_Handler, /* 32 CRC Calculation Unit */ + ACC_Handler, /* 33 Analog Comparator */ + UDP_Handler, /* 34 USB Device Port */ + Dummy_Handler /* 35 not used */ +}; + +/* TEMPORARY PATCH FOR SCB */ +#define SCB_VTOR_TBLBASE_Pos 29 /*!< SCB VTOR: TBLBASE Position */ +#define SCB_VTOR_TBLBASE_Msk (1UL << SCB_VTOR_TBLBASE_Pos) /*!< SCB VTOR: TBLBASE Mask */ + +/** + * \brief This is the code that gets called on processor reset. + * To initialize the device, and call the main() routine. + */ +void Reset_Handler(void) +{ + uint32_t *pSrc, *pDest; + + /* Initialize the relocate segment */ + pSrc = &_etext; + pDest = &_srelocate; + + if (pSrc != pDest) { + for (; pDest < &_erelocate;) { + *pDest++ = *pSrc++; + } + } + + /* Clear the zero segment */ + for (pDest = &_szero; pDest < &_ezero;) { + *pDest++ = 0; + } + + /* Set the vector table base address */ + pSrc = (uint32_t *) & _sfixed; + SCB->VTOR = ((uint32_t) pSrc & SCB_VTOR_TBLOFF_Msk); + + if (((uint32_t) pSrc >= IRAM_ADDR) && ((uint32_t) pSrc < IRAM_ADDR + IRAM_SIZE)) { + SCB->VTOR |= 1 << SCB_VTOR_TBLBASE_Pos; + } + + /* Initialize the C library */ + __libc_init_array(); + + /* Branch to main function */ + main(); + + /* Infinite loop */ + while (1); +}
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/source/templates/system_sam4s.c b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/source/templates/system_sam4s.c new file mode 100644 index 0000000..c4ce7e2 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/source/templates/system_sam4s.c
@@ -0,0 +1,212 @@ +/** + * \file + * + * \brief Provides the low-level initialization functions that called + * on chip startup. + * + * Copyright (c) 2011 - 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#include "system_sam4s.h" +#include "sam4s.h" + +/* @cond 0 */ +/**INDENT-OFF**/ +#ifdef __cplusplus +extern "C" { +#endif +/**INDENT-ON**/ +/* @endcond */ + +/* Clock Settings (120MHz) */ +#define SYS_BOARD_OSCOUNT (CKGR_MOR_MOSCXTST(0x8U)) +#define SYS_BOARD_PLLAR (CKGR_PLLAR_ONE \ + | CKGR_PLLAR_MULA(0x13U) \ + | CKGR_PLLAR_PLLACOUNT(0x3fU) \ + | CKGR_PLLAR_DIVA(0x1U)) +#define SYS_BOARD_MCKR (PMC_MCKR_PRES_CLK_2 | PMC_MCKR_CSS_PLLA_CLK) + +#define SYS_CKGR_MOR_KEY_VALUE CKGR_MOR_KEY(0x37) /* Key to unlock MOR register */ + +/* FIXME: should be generated by sock */ +uint32_t SystemCoreClock = CHIP_FREQ_MAINCK_RC_4MHZ; + +/** + * \brief Setup the microcontroller system. + * Initialize the System and update the SystemFrequency variable. + */ +void SystemInit(void) +{ + /* Set FWS according to SYS_BOARD_MCKR configuration */ + EFC->EEFC_FMR = EEFC_FMR_FWS(4); + + /* Initialize main oscillator */ + if (!(PMC->CKGR_MOR & CKGR_MOR_MOSCSEL)) { + PMC->CKGR_MOR = SYS_CKGR_MOR_KEY_VALUE | SYS_BOARD_OSCOUNT | + CKGR_MOR_MOSCRCEN | CKGR_MOR_MOSCXTEN; + while (!(PMC->PMC_SR & PMC_SR_MOSCXTS)) { + } + } + + /* Switch to 3-20MHz Xtal oscillator */ + PMC->CKGR_MOR = SYS_CKGR_MOR_KEY_VALUE | SYS_BOARD_OSCOUNT | + CKGR_MOR_MOSCRCEN | CKGR_MOR_MOSCXTEN | CKGR_MOR_MOSCSEL; + + while (!(PMC->PMC_SR & PMC_SR_MOSCSELS)) { + } + PMC->PMC_MCKR = (PMC->PMC_MCKR & ~(uint32_t)PMC_MCKR_CSS_Msk) | + PMC_MCKR_CSS_MAIN_CLK; + while (!(PMC->PMC_SR & PMC_SR_MCKRDY)) { + } + + /* Initialize PLLA */ + PMC->CKGR_PLLAR = SYS_BOARD_PLLAR; + while (!(PMC->PMC_SR & PMC_SR_LOCKA)) { + } + + /* Switch to main clock */ + PMC->PMC_MCKR = (SYS_BOARD_MCKR & ~PMC_MCKR_CSS_Msk) | PMC_MCKR_CSS_MAIN_CLK; + while (!(PMC->PMC_SR & PMC_SR_MCKRDY)) { + } + + /* Switch to PLLA */ + PMC->PMC_MCKR = SYS_BOARD_MCKR; + while (!(PMC->PMC_SR & PMC_SR_MCKRDY)) { + } + + SystemCoreClock = CHIP_FREQ_CPU_MAX; +} + +void SystemCoreClockUpdate(void) +{ + /* Determine clock frequency according to clock register values */ + switch (PMC->PMC_MCKR & (uint32_t) PMC_MCKR_CSS_Msk) { + case PMC_MCKR_CSS_SLOW_CLK: /* Slow clock */ + if (SUPC->SUPC_SR & SUPC_SR_OSCSEL) { + SystemCoreClock = CHIP_FREQ_XTAL_32K; + } else { + SystemCoreClock = CHIP_FREQ_SLCK_RC; + } + break; + case PMC_MCKR_CSS_MAIN_CLK: /* Main clock */ + if (PMC->CKGR_MOR & CKGR_MOR_MOSCSEL) { + SystemCoreClock = CHIP_FREQ_XTAL_12M; + } else { + SystemCoreClock = CHIP_FREQ_MAINCK_RC_4MHZ; + + switch (PMC->CKGR_MOR & CKGR_MOR_MOSCRCF_Msk) { + case CKGR_MOR_MOSCRCF_4_MHz: + break; + case CKGR_MOR_MOSCRCF_8_MHz: + SystemCoreClock *= 2U; + break; + case CKGR_MOR_MOSCRCF_12_MHz: + SystemCoreClock *= 3U; + break; + default: + break; + } + } + break; + case PMC_MCKR_CSS_PLLA_CLK: /* PLLA clock */ + case PMC_MCKR_CSS_PLLB_CLK: /* PLLB clock */ + if (PMC->CKGR_MOR & CKGR_MOR_MOSCSEL) { + SystemCoreClock = CHIP_FREQ_XTAL_12M; + } else { + SystemCoreClock = CHIP_FREQ_MAINCK_RC_4MHZ; + + switch (PMC->CKGR_MOR & CKGR_MOR_MOSCRCF_Msk) { + case CKGR_MOR_MOSCRCF_4_MHz: + break; + case CKGR_MOR_MOSCRCF_8_MHz: + SystemCoreClock *= 2U; + break; + case CKGR_MOR_MOSCRCF_12_MHz: + SystemCoreClock *= 3U; + break; + default: + break; + } + } + if ((uint32_t) (PMC->PMC_MCKR & (uint32_t) PMC_MCKR_CSS_Msk) == PMC_MCKR_CSS_PLLA_CLK) { + SystemCoreClock *= ((((PMC->CKGR_PLLAR) & CKGR_PLLAR_MULA_Msk) >> + CKGR_PLLAR_MULA_Pos) + 1U); + SystemCoreClock /= ((((PMC->CKGR_PLLAR) & CKGR_PLLAR_DIVA_Msk) >> + CKGR_PLLAR_DIVA_Pos)); + } else { + SystemCoreClock *= ((((PMC->CKGR_PLLBR) & CKGR_PLLBR_MULB_Msk) >> + CKGR_PLLBR_MULB_Pos) + 1U); + SystemCoreClock /= ((((PMC->CKGR_PLLBR) & CKGR_PLLBR_DIVB_Msk) >> + CKGR_PLLBR_DIVB_Pos)); + } + break; + default: + break; + } + + if ((PMC->PMC_MCKR & PMC_MCKR_PRES_Msk) == PMC_MCKR_PRES_CLK_3) { + SystemCoreClock /= 3U; + } else { + SystemCoreClock >>= ((PMC->PMC_MCKR & PMC_MCKR_PRES_Msk) >> PMC_MCKR_PRES_Pos); + } +} + +/** + * Initialize flash. + */ +void system_init_flash(uint32_t ul_clk) +{ + /* Set FWS for embedded Flash access according to operating frequency */ + if (ul_clk < CHIP_FREQ_FWS_0) { + EFC->EEFC_FMR = EEFC_FMR_FWS(0); + } else if (ul_clk < CHIP_FREQ_FWS_1) { + EFC->EEFC_FMR = EEFC_FMR_FWS(1); + } else if (ul_clk < CHIP_FREQ_FWS_2) { + EFC->EEFC_FMR = EEFC_FMR_FWS(2); + } else if (ul_clk < CHIP_FREQ_FWS_3) { + EFC->EEFC_FMR = EEFC_FMR_FWS(3); + } else { + EFC->EEFC_FMR = EEFC_FMR_FWS(4); + } +} + +/* @cond 0 */ +/**INDENT-OFF**/ +#ifdef __cplusplus +} +#endif +/**INDENT-ON**/ +/* @endcond */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/source/templates/system_sam4s.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/source/templates/system_sam4s.h new file mode 100644 index 0000000..4c0d7a1 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/cmsis/sam4s/source/templates/system_sam4s.h
@@ -0,0 +1,83 @@ +/** + * \file + * + * \brief Provides the low-level initialization functions that called + * on chip startup. + * + * Copyright (c) 2011 - 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef SYSTEM_SAM4S_H_INCLUDED +#define SYSTEM_SAM4S_H_INCLUDED + +/* @cond 0 */ +/**INDENT-OFF**/ +#ifdef __cplusplus +extern "C" { +#endif +/**INDENT-ON**/ +/* @endcond */ + +#include <stdint.h> + +extern uint32_t SystemCoreClock; /* System Clock Frequency (Core Clock) */ + +/** + * @brief Setup the microcontroller system. + * Initialize the System and update the SystemCoreClock variable. + */ +void SystemInit(void); + +/** + * @brief Updates the SystemCoreClock with current core Clock + * retrieved from cpu registers. + */ +void SystemCoreClockUpdate(void); + +/** + * Initialize flash. + */ +void system_init_flash(uint32_t ul_clk); + +/* @cond 0 */ +/**INDENT-OFF**/ +#ifdef __cplusplus +} +#endif +/**INDENT-ON**/ +/* @endcond */ + +#endif /* SYSTEM_SAM4S_H_INCLUDED */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/compiler.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/compiler.h new file mode 100644 index 0000000..ff59f66 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/compiler.h
@@ -0,0 +1,997 @@ +/** + * \file + * + * \brief Commonly used includes, types and macros. + * + * Copyright (c) 2010-2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef UTILS_COMPILER_H +#define UTILS_COMPILER_H + +/** + * \defgroup group_sam_utils Compiler abstraction layer and code utilities + * + * Compiler abstraction layer and code utilities for AT91SAM. + * This module provides various abstraction layers and utilities to make code compatible between different compilers. + * + * \{ + */ +#include <stddef.h> + +#if (defined __ICCARM__) +# include <intrinsics.h> +#endif + +#include "parts.h" +#include "preprocessor.h" + + +//_____ D E C L A R A T I O N S ____________________________________________ + +#ifndef __ASSEMBLY__ // Not defined for assembling. + +#include <stdio.h> +#include <stdbool.h> +#include <stdint.h> +#include <stdlib.h> + +#ifdef __ICCARM__ +/*! \name Compiler Keywords + * + * Port of some keywords from GCC to IAR Embedded Workbench. + */ +//! @{ +#define __asm__ asm +#define __inline__ inline +#define __volatile__ +//! @} + +#endif + +/** + * \def barrier + * \brief Memory barrier + */ +#define barrier() __DMB() + +/** + * \brief Emit the compiler pragma \a arg. + * + * \param arg The pragma directive as it would appear after \e \#pragma + * (i.e. not stringified). + */ +#define COMPILER_PRAGMA(arg) _Pragma(#arg) + +/** + * \def COMPILER_PACK_SET(alignment) + * \brief Set maximum alignment for subsequent struct and union + * definitions to \a alignment. + */ +#define COMPILER_PACK_SET(alignment) COMPILER_PRAGMA(pack(alignment)) + +/** + * \def COMPILER_PACK_RESET() + * \brief Set default alignment for subsequent struct and union + * definitions. + */ +#define COMPILER_PACK_RESET() COMPILER_PRAGMA(pack()) + + +/** + * \brief Set aligned boundary. + */ +#if (defined __GNUC__) || (defined __CC_ARM) +# define COMPILER_ALIGNED(a) __attribute__((__aligned__(a))) +#elif (defined __ICCARM__) +# define COMPILER_ALIGNED(a) COMPILER_PRAGMA(data_alignment = a) +#endif + +/** + * \brief Set word-aligned boundary. + */ +#if (defined __GNUC__) || defined(__CC_ARM) +#define COMPILER_WORD_ALIGNED __attribute__((__aligned__(4))) +#elif (defined __ICCARM__) +#define COMPILER_WORD_ALIGNED COMPILER_PRAGMA(data_alignment = 4) +#endif + +/** + * \def __always_inline + * \brief The function should always be inlined. + * + * This annotation instructs the compiler to ignore its inlining + * heuristics and inline the function no matter how big it thinks it + * becomes. + */ +#if defined(__CC_ARM) +# define __always_inline __forceinline +#elif (defined __GNUC__) +# define __always_inline __attribute__((__always_inline__)) +#elif (defined __ICCARM__) +# define __always_inline _Pragma("inline=forced") +#endif + +/*! \brief This macro is used to test fatal errors. + * + * The macro tests if the expression is false. If it is, a fatal error is + * detected and the application hangs up. If TEST_SUITE_DEFINE_ASSERT_MACRO + * is defined, a unit test version of the macro is used, to allow execution + * of further tests after a false expression. + * + * \param expr Expression to evaluate and supposed to be nonzero. + */ +#if defined(_ASSERT_ENABLE_) +# if defined(TEST_SUITE_DEFINE_ASSERT_MACRO) + // Assert() is defined in unit_test/suite.h +# include "unit_test/suite.h" +# else +#undef TEST_SUITE_DEFINE_ASSERT_MACRO +# define Assert(expr) \ + {\ + if (!(expr)) while (true);\ + } +# endif +#else +# define Assert(expr) ((void) 0) +#endif + +/* Define attribute */ +#if defined ( __CC_ARM ) /* Keil µVision 4 */ +# define WEAK __attribute__ ((weak)) +#elif defined ( __ICCARM__ ) /* IAR Ewarm 5.41+ */ +# define WEAK __weak +#elif defined ( __GNUC__ ) /* GCC CS3 2009q3-68 */ +# define WEAK __attribute__ ((weak)) +#endif + +/* Define NO_INIT attribute */ +#if defined ( __CC_ARM ) +# define NO_INIT __attribute__((zero_init)) +#elif defined ( __ICCARM__ ) +# define NO_INIT __no_init +#elif defined ( __GNUC__ ) +# define NO_INIT __attribute__((section(".no_init"))) +#endif + +#include "interrupt.h" + +/*! \name Usual Types + */ +//! @{ +typedef unsigned char Bool; //!< Boolean. +#ifndef __cplusplus +#if !defined(__bool_true_false_are_defined) +typedef unsigned char bool; //!< Boolean. +#endif +#endif +typedef int8_t S8 ; //!< 8-bit signed integer. +typedef uint8_t U8 ; //!< 8-bit unsigned integer. +typedef int16_t S16; //!< 16-bit signed integer. +typedef uint16_t U16; //!< 16-bit unsigned integer. +typedef uint16_t le16_t; +typedef uint16_t be16_t; +typedef int32_t S32; //!< 32-bit signed integer. +typedef uint32_t U32; //!< 32-bit unsigned integer. +typedef uint32_t le32_t; +typedef uint32_t be32_t; +typedef int64_t S64; //!< 64-bit signed integer. +typedef uint64_t U64; //!< 64-bit unsigned integer. +typedef float F32; //!< 32-bit floating-point number. +typedef double F64; //!< 64-bit floating-point number. +typedef uint32_t iram_size_t; +//! @} + + +/*! \name Status Types + */ +//! @{ +typedef bool Status_bool_t; //!< Boolean status. +typedef U8 Status_t; //!< 8-bit-coded status. +//! @} + + +/*! \name Aliasing Aggregate Types + */ +//! @{ + +//! 16-bit union. +typedef union +{ + S16 s16 ; + U16 u16 ; + S8 s8 [2]; + U8 u8 [2]; +} Union16; + +//! 32-bit union. +typedef union +{ + S32 s32 ; + U32 u32 ; + S16 s16[2]; + U16 u16[2]; + S8 s8 [4]; + U8 u8 [4]; +} Union32; + +//! 64-bit union. +typedef union +{ + S64 s64 ; + U64 u64 ; + S32 s32[2]; + U32 u32[2]; + S16 s16[4]; + U16 u16[4]; + S8 s8 [8]; + U8 u8 [8]; +} Union64; + +//! Union of pointers to 64-, 32-, 16- and 8-bit unsigned integers. +typedef union +{ + S64 *s64ptr; + U64 *u64ptr; + S32 *s32ptr; + U32 *u32ptr; + S16 *s16ptr; + U16 *u16ptr; + S8 *s8ptr ; + U8 *u8ptr ; +} UnionPtr; + +//! Union of pointers to volatile 64-, 32-, 16- and 8-bit unsigned integers. +typedef union +{ + volatile S64 *s64ptr; + volatile U64 *u64ptr; + volatile S32 *s32ptr; + volatile U32 *u32ptr; + volatile S16 *s16ptr; + volatile U16 *u16ptr; + volatile S8 *s8ptr ; + volatile U8 *u8ptr ; +} UnionVPtr; + +//! Union of pointers to constant 64-, 32-, 16- and 8-bit unsigned integers. +typedef union +{ + const S64 *s64ptr; + const U64 *u64ptr; + const S32 *s32ptr; + const U32 *u32ptr; + const S16 *s16ptr; + const U16 *u16ptr; + const S8 *s8ptr ; + const U8 *u8ptr ; +} UnionCPtr; + +//! Union of pointers to constant volatile 64-, 32-, 16- and 8-bit unsigned integers. +typedef union +{ + const volatile S64 *s64ptr; + const volatile U64 *u64ptr; + const volatile S32 *s32ptr; + const volatile U32 *u32ptr; + const volatile S16 *s16ptr; + const volatile U16 *u16ptr; + const volatile S8 *s8ptr ; + const volatile U8 *u8ptr ; +} UnionCVPtr; + +//! Structure of pointers to 64-, 32-, 16- and 8-bit unsigned integers. +typedef struct +{ + S64 *s64ptr; + U64 *u64ptr; + S32 *s32ptr; + U32 *u32ptr; + S16 *s16ptr; + U16 *u16ptr; + S8 *s8ptr ; + U8 *u8ptr ; +} StructPtr; + +//! Structure of pointers to volatile 64-, 32-, 16- and 8-bit unsigned integers. +typedef struct +{ + volatile S64 *s64ptr; + volatile U64 *u64ptr; + volatile S32 *s32ptr; + volatile U32 *u32ptr; + volatile S16 *s16ptr; + volatile U16 *u16ptr; + volatile S8 *s8ptr ; + volatile U8 *u8ptr ; +} StructVPtr; + +//! Structure of pointers to constant 64-, 32-, 16- and 8-bit unsigned integers. +typedef struct +{ + const S64 *s64ptr; + const U64 *u64ptr; + const S32 *s32ptr; + const U32 *u32ptr; + const S16 *s16ptr; + const U16 *u16ptr; + const S8 *s8ptr ; + const U8 *u8ptr ; +} StructCPtr; + +//! Structure of pointers to constant volatile 64-, 32-, 16- and 8-bit unsigned integers. +typedef struct +{ + const volatile S64 *s64ptr; + const volatile U64 *u64ptr; + const volatile S32 *s32ptr; + const volatile U32 *u32ptr; + const volatile S16 *s16ptr; + const volatile U16 *u16ptr; + const volatile S8 *s8ptr ; + const volatile U8 *u8ptr ; +} StructCVPtr; + +//! @} + +#endif // #ifndef __ASSEMBLY__ + +/*! \name Usual Constants + */ +//! @{ +#define DISABLE 0 +#define ENABLE 1 +#ifndef __cplusplus +#if !defined(__bool_true_false_are_defined) +#define false 0 +#define true 1 +#endif +#endif +#define PASS 0 +#define FAIL 1 +#define LOW 0 +#define HIGH 1 +//! @} + + +#ifndef __ASSEMBLY__ // not for assembling. + +//! \name Optimization Control +//@{ + +/** + * \def likely(exp) + * \brief The expression \a exp is likely to be true + */ +#ifndef likely +# define likely(exp) (exp) +#endif + +/** + * \def unlikely(exp) + * \brief The expression \a exp is unlikely to be true + */ +#ifndef unlikely +# define unlikely(exp) (exp) +#endif + +/** + * \def is_constant(exp) + * \brief Determine if an expression evaluates to a constant value. + * + * \param exp Any expression + * + * \return true if \a exp is constant, false otherwise. + */ +#if (defined __GNUC__) || (defined __CC_ARM) +# define is_constant(exp) __builtin_constant_p(exp) +#else +# define is_constant(exp) (0) +#endif + +//! @} + +/*! \name Bit-Field Handling + */ +//! @{ + +/*! \brief Reads the bits of a value specified by a given bit-mask. + * + * \param value Value to read bits from. + * \param mask Bit-mask indicating bits to read. + * + * \return Read bits. + */ +#define Rd_bits( value, mask) ((value) & (mask)) + +/*! \brief Writes the bits of a C lvalue specified by a given bit-mask. + * + * \param lvalue C lvalue to write bits to. + * \param mask Bit-mask indicating bits to write. + * \param bits Bits to write. + * + * \return Resulting value with written bits. + */ +#define Wr_bits(lvalue, mask, bits) ((lvalue) = ((lvalue) & ~(mask)) |\ + ((bits ) & (mask))) + +/*! \brief Tests the bits of a value specified by a given bit-mask. + * + * \param value Value of which to test bits. + * \param mask Bit-mask indicating bits to test. + * + * \return \c 1 if at least one of the tested bits is set, else \c 0. + */ +#define Tst_bits( value, mask) (Rd_bits(value, mask) != 0) + +/*! \brief Clears the bits of a C lvalue specified by a given bit-mask. + * + * \param lvalue C lvalue of which to clear bits. + * \param mask Bit-mask indicating bits to clear. + * + * \return Resulting value with cleared bits. + */ +#define Clr_bits(lvalue, mask) ((lvalue) &= ~(mask)) + +/*! \brief Sets the bits of a C lvalue specified by a given bit-mask. + * + * \param lvalue C lvalue of which to set bits. + * \param mask Bit-mask indicating bits to set. + * + * \return Resulting value with set bits. + */ +#define Set_bits(lvalue, mask) ((lvalue) |= (mask)) + +/*! \brief Toggles the bits of a C lvalue specified by a given bit-mask. + * + * \param lvalue C lvalue of which to toggle bits. + * \param mask Bit-mask indicating bits to toggle. + * + * \return Resulting value with toggled bits. + */ +#define Tgl_bits(lvalue, mask) ((lvalue) ^= (mask)) + +/*! \brief Reads the bit-field of a value specified by a given bit-mask. + * + * \param value Value to read a bit-field from. + * \param mask Bit-mask indicating the bit-field to read. + * + * \return Read bit-field. + */ +#define Rd_bitfield( value, mask) (Rd_bits( value, mask) >> ctz(mask)) + +/*! \brief Writes the bit-field of a C lvalue specified by a given bit-mask. + * + * \param lvalue C lvalue to write a bit-field to. + * \param mask Bit-mask indicating the bit-field to write. + * \param bitfield Bit-field to write. + * + * \return Resulting value with written bit-field. + */ +#define Wr_bitfield(lvalue, mask, bitfield) (Wr_bits(lvalue, mask, (U32)(bitfield) << ctz(mask))) + +//! @} + + +/*! \name Zero-Bit Counting + * + * Under GCC, __builtin_clz and __builtin_ctz behave like macros when + * applied to constant expressions (values known at compile time), so they are + * more optimized than the use of the corresponding assembly instructions and + * they can be used as constant expressions e.g. to initialize objects having + * static storage duration, and like the corresponding assembly instructions + * when applied to non-constant expressions (values unknown at compile time), so + * they are more optimized than an assembly periphrasis. Hence, clz and ctz + * ensure a possible and optimized behavior for both constant and non-constant + * expressions. + */ +//! @{ + +/*! \brief Counts the leading zero bits of the given value considered as a 32-bit integer. + * + * \param u Value of which to count the leading zero bits. + * + * \return The count of leading zero bits in \a u. + */ +#if (defined __GNUC__) || (defined __CC_ARM) +# define clz(u) __builtin_clz(u) +#elif (defined __ICCARM__) +# define clz(u) __CLZ(u) +#else +# define clz(u) (((u) == 0) ? 32 : \ + ((u) & (1ul << 31)) ? 0 : \ + ((u) & (1ul << 30)) ? 1 : \ + ((u) & (1ul << 29)) ? 2 : \ + ((u) & (1ul << 28)) ? 3 : \ + ((u) & (1ul << 27)) ? 4 : \ + ((u) & (1ul << 26)) ? 5 : \ + ((u) & (1ul << 25)) ? 6 : \ + ((u) & (1ul << 24)) ? 7 : \ + ((u) & (1ul << 23)) ? 8 : \ + ((u) & (1ul << 22)) ? 9 : \ + ((u) & (1ul << 21)) ? 10 : \ + ((u) & (1ul << 20)) ? 11 : \ + ((u) & (1ul << 19)) ? 12 : \ + ((u) & (1ul << 18)) ? 13 : \ + ((u) & (1ul << 17)) ? 14 : \ + ((u) & (1ul << 16)) ? 15 : \ + ((u) & (1ul << 15)) ? 16 : \ + ((u) & (1ul << 14)) ? 17 : \ + ((u) & (1ul << 13)) ? 18 : \ + ((u) & (1ul << 12)) ? 19 : \ + ((u) & (1ul << 11)) ? 20 : \ + ((u) & (1ul << 10)) ? 21 : \ + ((u) & (1ul << 9)) ? 22 : \ + ((u) & (1ul << 8)) ? 23 : \ + ((u) & (1ul << 7)) ? 24 : \ + ((u) & (1ul << 6)) ? 25 : \ + ((u) & (1ul << 5)) ? 26 : \ + ((u) & (1ul << 4)) ? 27 : \ + ((u) & (1ul << 3)) ? 28 : \ + ((u) & (1ul << 2)) ? 29 : \ + ((u) & (1ul << 1)) ? 30 : \ + 31) +#endif + +/*! \brief Counts the trailing zero bits of the given value considered as a 32-bit integer. + * + * \param u Value of which to count the trailing zero bits. + * + * \return The count of trailing zero bits in \a u. + */ +#if (defined __GNUC__) || (defined __CC_ARM) +# define ctz(u) __builtin_ctz(u) +#else +# define ctz(u) ((u) & (1ul << 0) ? 0 : \ + (u) & (1ul << 1) ? 1 : \ + (u) & (1ul << 2) ? 2 : \ + (u) & (1ul << 3) ? 3 : \ + (u) & (1ul << 4) ? 4 : \ + (u) & (1ul << 5) ? 5 : \ + (u) & (1ul << 6) ? 6 : \ + (u) & (1ul << 7) ? 7 : \ + (u) & (1ul << 8) ? 8 : \ + (u) & (1ul << 9) ? 9 : \ + (u) & (1ul << 10) ? 10 : \ + (u) & (1ul << 11) ? 11 : \ + (u) & (1ul << 12) ? 12 : \ + (u) & (1ul << 13) ? 13 : \ + (u) & (1ul << 14) ? 14 : \ + (u) & (1ul << 15) ? 15 : \ + (u) & (1ul << 16) ? 16 : \ + (u) & (1ul << 17) ? 17 : \ + (u) & (1ul << 18) ? 18 : \ + (u) & (1ul << 19) ? 19 : \ + (u) & (1ul << 20) ? 20 : \ + (u) & (1ul << 21) ? 21 : \ + (u) & (1ul << 22) ? 22 : \ + (u) & (1ul << 23) ? 23 : \ + (u) & (1ul << 24) ? 24 : \ + (u) & (1ul << 25) ? 25 : \ + (u) & (1ul << 26) ? 26 : \ + (u) & (1ul << 27) ? 27 : \ + (u) & (1ul << 28) ? 28 : \ + (u) & (1ul << 29) ? 29 : \ + (u) & (1ul << 30) ? 30 : \ + (u) & (1ul << 31) ? 31 : \ + 32) +#endif + +//! @} + + +/*! \name Bit Reversing + */ +//! @{ + +/*! \brief Reverses the bits of \a u8. + * + * \param u8 U8 of which to reverse the bits. + * + * \return Value resulting from \a u8 with reversed bits. + */ +#define bit_reverse8(u8) ((U8)(bit_reverse32((U8)(u8)) >> 24)) + +/*! \brief Reverses the bits of \a u16. + * + * \param u16 U16 of which to reverse the bits. + * + * \return Value resulting from \a u16 with reversed bits. + */ +#define bit_reverse16(u16) ((U16)(bit_reverse32((U16)(u16)) >> 16)) + +/*! \brief Reverses the bits of \a u32. + * + * \param u32 U32 of which to reverse the bits. + * + * \return Value resulting from \a u32 with reversed bits. + */ +#define bit_reverse32(u32) __RBIT(u32) + +/*! \brief Reverses the bits of \a u64. + * + * \param u64 U64 of which to reverse the bits. + * + * \return Value resulting from \a u64 with reversed bits. + */ +#define bit_reverse64(u64) ((U64)(((U64)bit_reverse32((U64)(u64) >> 32)) |\ + ((U64)bit_reverse32((U64)(u64)) << 32))) + +//! @} + + +/*! \name Alignment + */ +//! @{ + +/*! \brief Tests alignment of the number \a val with the \a n boundary. + * + * \param val Input value. + * \param n Boundary. + * + * \return \c 1 if the number \a val is aligned with the \a n boundary, else \c 0. + */ +#define Test_align(val, n ) (!Tst_bits( val, (n) - 1 ) ) + +/*! \brief Gets alignment of the number \a val with respect to the \a n boundary. + * + * \param val Input value. + * \param n Boundary. + * + * \return Alignment of the number \a val with respect to the \a n boundary. + */ +#define Get_align( val, n ) ( Rd_bits( val, (n) - 1 ) ) + +/*! \brief Sets alignment of the lvalue number \a lval to \a alg with respect to the \a n boundary. + * + * \param lval Input/output lvalue. + * \param n Boundary. + * \param alg Alignment. + * + * \return New value of \a lval resulting from its alignment set to \a alg with respect to the \a n boundary. + */ +#define Set_align(lval, n, alg) ( Wr_bits(lval, (n) - 1, alg) ) + +/*! \brief Aligns the number \a val with the upper \a n boundary. + * + * \param val Input value. + * \param n Boundary. + * + * \return Value resulting from the number \a val aligned with the upper \a n boundary. + */ +#define Align_up( val, n ) (((val) + ((n) - 1)) & ~((n) - 1)) + +/*! \brief Aligns the number \a val with the lower \a n boundary. + * + * \param val Input value. + * \param n Boundary. + * + * \return Value resulting from the number \a val aligned with the lower \a n boundary. + */ +#define Align_down(val, n ) ( (val) & ~((n) - 1)) + +//! @} + + +/*! \name Mathematics + * + * The same considerations as for clz and ctz apply here but GCC does not + * provide built-in functions to access the assembly instructions abs, min and + * max and it does not produce them by itself in most cases, so two sets of + * macros are defined here: + * - Abs, Min and Max to apply to constant expressions (values known at + * compile time); + * - abs, min and max to apply to non-constant expressions (values unknown at + * compile time), abs is found in stdlib.h. + */ +//! @{ + +/*! \brief Takes the absolute value of \a a. + * + * \param a Input value. + * + * \return Absolute value of \a a. + * + * \note More optimized if only used with values known at compile time. + */ +#define Abs(a) (((a) < 0 ) ? -(a) : (a)) + +/*! \brief Takes the minimal value of \a a and \a b. + * + * \param a Input value. + * \param b Input value. + * + * \return Minimal value of \a a and \a b. + * + * \note More optimized if only used with values known at compile time. + */ +#define Min(a, b) (((a) < (b)) ? (a) : (b)) + +/*! \brief Takes the maximal value of \a a and \a b. + * + * \param a Input value. + * \param b Input value. + * + * \return Maximal value of \a a and \a b. + * + * \note More optimized if only used with values known at compile time. + */ +#define Max(a, b) (((a) > (b)) ? (a) : (b)) + +// abs() is already defined by stdlib.h + +/*! \brief Takes the minimal value of \a a and \a b. + * + * \param a Input value. + * \param b Input value. + * + * \return Minimal value of \a a and \a b. + * + * \note More optimized if only used with values unknown at compile time. + */ +#define min(a, b) Min(a, b) + +/*! \brief Takes the maximal value of \a a and \a b. + * + * \param a Input value. + * \param b Input value. + * + * \return Maximal value of \a a and \a b. + * + * \note More optimized if only used with values unknown at compile time. + */ +#define max(a, b) Max(a, b) + +//! @} + + +/*! \brief Calls the routine at address \a addr. + * + * It generates a long call opcode. + * + * For example, `Long_call(0x80000000)' generates a software reset on a UC3 if + * it is invoked from the CPU supervisor mode. + * + * \param addr Address of the routine to call. + * + * \note It may be used as a long jump opcode in some special cases. + */ +#define Long_call(addr) ((*(void (*)(void))(addr))()) + + +/*! \name MCU Endianism Handling + * ARM is MCU little endianism. + */ +//! @{ +#define MSB(u16) (((U8 *)&(u16))[1]) //!< Most significant byte of \a u16. +#define LSB(u16) (((U8 *)&(u16))[0]) //!< Least significant byte of \a u16. + +#define MSH(u32) (((U16 *)&(u32))[1]) //!< Most significant half-word of \a u32. +#define LSH(u32) (((U16 *)&(u32))[0]) //!< Least significant half-word of \a u32. +#define MSB0W(u32) (((U8 *)&(u32))[3]) //!< Most significant byte of 1st rank of \a u32. +#define MSB1W(u32) (((U8 *)&(u32))[2]) //!< Most significant byte of 2nd rank of \a u32. +#define MSB2W(u32) (((U8 *)&(u32))[1]) //!< Most significant byte of 3rd rank of \a u32. +#define MSB3W(u32) (((U8 *)&(u32))[0]) //!< Most significant byte of 4th rank of \a u32. +#define LSB3W(u32) MSB0W(u32) //!< Least significant byte of 4th rank of \a u32. +#define LSB2W(u32) MSB1W(u32) //!< Least significant byte of 3rd rank of \a u32. +#define LSB1W(u32) MSB2W(u32) //!< Least significant byte of 2nd rank of \a u32. +#define LSB0W(u32) MSB3W(u32) //!< Least significant byte of 1st rank of \a u32. + +#define MSW(u64) (((U32 *)&(u64))[1]) //!< Most significant word of \a u64. +#define LSW(u64) (((U32 *)&(u64))[0]) //!< Least significant word of \a u64. +#define MSH0(u64) (((U16 *)&(u64))[3]) //!< Most significant half-word of 1st rank of \a u64. +#define MSH1(u64) (((U16 *)&(u64))[2]) //!< Most significant half-word of 2nd rank of \a u64. +#define MSH2(u64) (((U16 *)&(u64))[1]) //!< Most significant half-word of 3rd rank of \a u64. +#define MSH3(u64) (((U16 *)&(u64))[0]) //!< Most significant half-word of 4th rank of \a u64. +#define LSH3(u64) MSH0(u64) //!< Least significant half-word of 4th rank of \a u64. +#define LSH2(u64) MSH1(u64) //!< Least significant half-word of 3rd rank of \a u64. +#define LSH1(u64) MSH2(u64) //!< Least significant half-word of 2nd rank of \a u64. +#define LSH0(u64) MSH3(u64) //!< Least significant half-word of 1st rank of \a u64. +#define MSB0D(u64) (((U8 *)&(u64))[7]) //!< Most significant byte of 1st rank of \a u64. +#define MSB1D(u64) (((U8 *)&(u64))[6]) //!< Most significant byte of 2nd rank of \a u64. +#define MSB2D(u64) (((U8 *)&(u64))[5]) //!< Most significant byte of 3rd rank of \a u64. +#define MSB3D(u64) (((U8 *)&(u64))[4]) //!< Most significant byte of 4th rank of \a u64. +#define MSB4D(u64) (((U8 *)&(u64))[3]) //!< Most significant byte of 5th rank of \a u64. +#define MSB5D(u64) (((U8 *)&(u64))[2]) //!< Most significant byte of 6th rank of \a u64. +#define MSB6D(u64) (((U8 *)&(u64))[1]) //!< Most significant byte of 7th rank of \a u64. +#define MSB7D(u64) (((U8 *)&(u64))[0]) //!< Most significant byte of 8th rank of \a u64. +#define LSB7D(u64) MSB0D(u64) //!< Least significant byte of 8th rank of \a u64. +#define LSB6D(u64) MSB1D(u64) //!< Least significant byte of 7th rank of \a u64. +#define LSB5D(u64) MSB2D(u64) //!< Least significant byte of 6th rank of \a u64. +#define LSB4D(u64) MSB3D(u64) //!< Least significant byte of 5th rank of \a u64. +#define LSB3D(u64) MSB4D(u64) //!< Least significant byte of 4th rank of \a u64. +#define LSB2D(u64) MSB5D(u64) //!< Least significant byte of 3rd rank of \a u64. +#define LSB1D(u64) MSB6D(u64) //!< Least significant byte of 2nd rank of \a u64. +#define LSB0D(u64) MSB7D(u64) //!< Least significant byte of 1st rank of \a u64. + +#define BE16(x) Swap16(x) +#define LE16(x) (x) + +#define le16_to_cpu(x) (x) +#define cpu_to_le16(x) (x) +#define LE16_TO_CPU(x) (x) +#define CPU_TO_LE16(x) (x) + +#define be16_to_cpu(x) Swap16(x) +#define cpu_to_be16(x) Swap16(x) +#define BE16_TO_CPU(x) Swap16(x) +#define CPU_TO_BE16(x) Swap16(x) + +#define le32_to_cpu(x) (x) +#define cpu_to_le32(x) (x) +#define LE32_TO_CPU(x) (x) +#define CPU_TO_LE32(x) (x) + +#define be32_to_cpu(x) swap32(x) +#define cpu_to_be32(x) swap32(x) +#define BE32_TO_CPU(x) swap32(x) +#define CPU_TO_BE32(x) swap32(x) +//! @} + + +/*! \name Endianism Conversion + * + * The same considerations as for clz and ctz apply here but GCC's + * __builtin_bswap_32 and __builtin_bswap_64 do not behave like macros when + * applied to constant expressions, so two sets of macros are defined here: + * - Swap16, Swap32 and Swap64 to apply to constant expressions (values known + * at compile time); + * - swap16, swap32 and swap64 to apply to non-constant expressions (values + * unknown at compile time). + */ +//! @{ + +/*! \brief Toggles the endianism of \a u16 (by swapping its bytes). + * + * \param u16 U16 of which to toggle the endianism. + * + * \return Value resulting from \a u16 with toggled endianism. + * + * \note More optimized if only used with values known at compile time. + */ +#define Swap16(u16) ((U16)(((U16)(u16) >> 8) |\ + ((U16)(u16) << 8))) + +/*! \brief Toggles the endianism of \a u32 (by swapping its bytes). + * + * \param u32 U32 of which to toggle the endianism. + * + * \return Value resulting from \a u32 with toggled endianism. + * + * \note More optimized if only used with values known at compile time. + */ +#define Swap32(u32) ((U32)(((U32)Swap16((U32)(u32) >> 16)) |\ + ((U32)Swap16((U32)(u32)) << 16))) + +/*! \brief Toggles the endianism of \a u64 (by swapping its bytes). + * + * \param u64 U64 of which to toggle the endianism. + * + * \return Value resulting from \a u64 with toggled endianism. + * + * \note More optimized if only used with values known at compile time. + */ +#define Swap64(u64) ((U64)(((U64)Swap32((U64)(u64) >> 32)) |\ + ((U64)Swap32((U64)(u64)) << 32))) + +/*! \brief Toggles the endianism of \a u16 (by swapping its bytes). + * + * \param u16 U16 of which to toggle the endianism. + * + * \return Value resulting from \a u16 with toggled endianism. + * + * \note More optimized if only used with values unknown at compile time. + */ +#define swap16(u16) Swap16(u16) + +/*! \brief Toggles the endianism of \a u32 (by swapping its bytes). + * + * \param u32 U32 of which to toggle the endianism. + * + * \return Value resulting from \a u32 with toggled endianism. + * + * \note More optimized if only used with values unknown at compile time. + */ +#if (defined __GNUC__) +# define swap32(u32) ((U32)__builtin_bswap32((U32)(u32))) +#else +# define swap32(u32) Swap32(u32) +#endif + +/*! \brief Toggles the endianism of \a u64 (by swapping its bytes). + * + * \param u64 U64 of which to toggle the endianism. + * + * \return Value resulting from \a u64 with toggled endianism. + * + * \note More optimized if only used with values unknown at compile time. + */ +#if (defined __GNUC__) +# define swap64(u64) ((U64)__builtin_bswap64((U64)(u64))) +#else +# define swap64(u64) ((U64)(((U64)swap32((U64)(u64) >> 32)) |\ + ((U64)swap32((U64)(u64)) << 32))) +#endif + +//! @} + + +/*! \name Target Abstraction + */ +//! @{ + +#define _GLOBEXT_ extern //!< extern storage-class specifier. +#define _CONST_TYPE_ const //!< const type qualifier. +#define _MEM_TYPE_SLOW_ //!< Slow memory type. +#define _MEM_TYPE_MEDFAST_ //!< Fairly fast memory type. +#define _MEM_TYPE_FAST_ //!< Fast memory type. + +typedef U8 Byte; //!< 8-bit unsigned integer. + +#define memcmp_ram2ram memcmp //!< Target-specific memcmp of RAM to RAM. +#define memcmp_code2ram memcmp //!< Target-specific memcmp of RAM to NVRAM. +#define memcpy_ram2ram memcpy //!< Target-specific memcpy from RAM to RAM. +#define memcpy_code2ram memcpy //!< Target-specific memcpy from NVRAM to RAM. + +#define LSB0(u32) LSB0W(u32) //!< Least significant byte of 1st rank of \a u32. +#define LSB1(u32) LSB1W(u32) //!< Least significant byte of 2nd rank of \a u32. +#define LSB2(u32) LSB2W(u32) //!< Least significant byte of 3rd rank of \a u32. +#define LSB3(u32) LSB3W(u32) //!< Least significant byte of 4th rank of \a u32. +#define MSB3(u32) MSB3W(u32) //!< Most significant byte of 4th rank of \a u32. +#define MSB2(u32) MSB2W(u32) //!< Most significant byte of 3rd rank of \a u32. +#define MSB1(u32) MSB1W(u32) //!< Most significant byte of 2nd rank of \a u32. +#define MSB0(u32) MSB0W(u32) //!< Most significant byte of 1st rank of \a u32. + +//! @} + +/** + * \brief Calculate \f$ \left\lceil \frac{a}{b} \right\rceil \f$ using + * integer arithmetic. + * + * \param a An integer + * \param b Another integer + * + * \return (\a a / \a b) rounded up to the nearest integer. + */ +#define div_ceil(a, b) (((a) + (b) - 1) / (b)) + +#endif // #ifndef __ASSEMBLY__ + +/** + * \} + */ + +#endif /* UTILS_COMPILER_H */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/header_files/io.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/header_files/io.h new file mode 100644 index 0000000..d6093a2 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/header_files/io.h
@@ -0,0 +1,78 @@ +/** + * \file + * + * \brief Arch file for SAM. + * + * This file defines common SAM series. + * + * Copyright (c) 2011 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM_IO_ +#define _SAM_IO_ + +/* SAM3 family */ + +/* SAM3S series */ +#if (SAM3S) +# if (SAM3S8 || SAM3SD8) +# include "sam3s8.h" +# else +# include "sam3s.h" +# endif +#endif + +/* SAM3U series */ +#if (SAM3U) +# include "sam3u.h" +#endif + +/* SAM3N series */ +#if (SAM3N) +# include "sam3n.h" +#endif + +/* SAM3XA series */ +#if (SAM3XA) +# include "sam3xa.h" +#endif + +/* SAM4S series */ +#if (SAM4S) +# include "sam4s.h" +#endif + +#endif /* _SAM_IO_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/linker_scripts/sam4s/sam4s16/gcc/flash.ld b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/linker_scripts/sam4s/sam4s16/gcc/flash.ld new file mode 100644 index 0000000..763a910 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/linker_scripts/sam4s/sam4s16/gcc/flash.ld
@@ -0,0 +1,154 @@ +/** + * \file + * + * \brief Flash Linker script for SAM. + * + * Copyright (c) 2011 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +SEARCH_DIR(.) + +/* Memory Spaces Definitions */ +MEMORY +{ + rom (rx) : ORIGIN = 0x00400000, LENGTH = 0x00100000 /* flash, 1024K */ + ram (rwx) : ORIGIN = 0x20000000, LENGTH = 0x00020000 /* sram, 128K */ +} + +/* The stack size used by the application. NOTE: you need to adjust according to your application. */ +STACK_SIZE = 0x3000; + +/* Section Definitions */ +SECTIONS +{ + .text : + { + . = ALIGN(4); + _sfixed = .; + KEEP(*(.vectors .vectors.*)) + *(.text .text.* .gnu.linkonce.t.*) + *(.glue_7t) *(.glue_7) + *(.rodata .rodata* .gnu.linkonce.r.*) + *(.ARM.extab* .gnu.linkonce.armextab.*) + + /* Support C constructors, and C destructors in both user code + and the C library. This also provides support for C++ code. */ + . = ALIGN(4); + KEEP(*(.init)) + . = ALIGN(4); + __preinit_array_start = .; + KEEP (*(.preinit_array)) + __preinit_array_end = .; + + . = ALIGN(4); + __init_array_start = .; + KEEP (*(SORT(.init_array.*))) + KEEP (*(.init_array)) + __init_array_end = .; + + . = ALIGN(0x4); + KEEP (*crtbegin.o(.ctors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .ctors)) + KEEP (*(SORT(.ctors.*))) + KEEP (*crtend.o(.ctors)) + + . = ALIGN(4); + KEEP(*(.fini)) + + . = ALIGN(4); + __fini_array_start = .; + KEEP (*(.fini_array)) + KEEP (*(SORT(.fini_array.*))) + __fini_array_end = .; + + KEEP (*crtbegin.o(.dtors)) + KEEP (*(EXCLUDE_FILE (*crtend.o) .dtors)) + KEEP (*(SORT(.dtors.*))) + KEEP (*crtend.o(.dtors)) + + . = ALIGN(4); + _efixed = .; /* End of text section */ + } > rom + + /* .ARM.exidx is sorted, so has to go in its own output section. */ + PROVIDE_HIDDEN (__exidx_start = .); + .ARM.exidx : + { + *(.ARM.exidx* .gnu.linkonce.armexidx.*) + } > rom + PROVIDE_HIDDEN (__exidx_end = .); + + . = ALIGN(4); + _etext = .; + + .relocate : AT (_etext) + { + . = ALIGN(4); + _srelocate = .; + *(.ramfunc .ramfunc.*); + *(.data .data.*); + . = ALIGN(4); + _erelocate = .; + } > ram + + /* .bss section which is used for uninitialized data */ + .bss (NOLOAD) : + { + . = ALIGN(4); + _sbss = . ; + _szero = .; + *(.bss .bss.*) + *(COMMON) + . = ALIGN(4); + _ebss = . ; + _ezero = .; + } > ram + + /* stack section */ + .stack (NOLOAD): + { + . = ALIGN(8); + _sstack = .; + . = . + STACK_SIZE; + . = ALIGN(8); + _estack = .; + } > ram + + . = ALIGN(4); + _end = . ; +}
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/make/Makefile.in b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/make/Makefile.in new file mode 100644 index 0000000..f11d595 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/make/Makefile.in
@@ -0,0 +1,495 @@ +# List of available make goals: +# +# all Default target, builds the project +# clean Clean up the project +# rebuild Rebuild the project +# debug_flash Builds the project and debug in flash +# debug_sram Builds the project and debug in sram +# +# doc Build the documentation +# cleandoc Clean up the documentation +# rebuilddoc Rebuild the documentation +# +# \file +# +# Copyright (c) 2011 - 2012 Atmel Corporation. All rights reserved. +# +# \asf_license_start +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions are met: +# +# 1. Redistributions of source code must retain the above copyright notice, +# this list of conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above copyright notice, +# this list of conditions and the following disclaimer in the documentation +# and/or other materials provided with the distribution. +# +# 3. The name of Atmel may not be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# 4. This software may only be redistributed and used in connection with an +# Atmel microcontroller product. +# +# THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE +# EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR +# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS +# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) +# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +# STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +# \asf_license_stop +# + +# Include the config.mk file from the current working path, e.g., where the +# user called make. +include config.mk + +# Tool to use to generate documentation from the source code +DOCGEN ?= doxygen + +# Look for source files relative to the top-level source directory +VPATH := $(PRJ_PATH) + +# Output target file +project_type := $(PROJECT_TYPE) + +# Output target file +ifeq ($(project_type),flash) +target := $(TARGET_FLASH) +linker_script := $(PRJ_PATH)/$(LINKER_SCRIPT_FLASH) +debug_script := $(PRJ_PATH)/$(DEBUG_SCRIPT_FLASH) +else +target := $(TARGET_SRAM) +linker_script := $(PRJ_PATH)/$(LINKER_SCRIPT_SRAM) +debug_script := $(PRJ_PATH)/$(DEBUG_SCRIPT_SRAM) +endif + +# Output project name (target name minus suffix) +project := $(basename $(target)) + +# Output target file (typically ELF or static library) +ifeq ($(suffix $(target)),.a) +target_type := lib +else +ifeq ($(suffix $(target)),.elf) +target_type := elf +else +$(error "Target type $(target_type) is not supported") +endif +endif + +# Allow override of operating system detection. The user can add OS=Linux or +# OS=Windows on the command line to explicit set the host OS. +# +# This allows to work around broken uname utility on certain systems. +ifdef OS + ifeq ($(strip $(OS)), Linux) + os_type := Linux + endif + ifeq (Windows,$(findstring Windows,$(OS))) + os_type := windows32_64 + endif +endif + +#os_type ?= $(strip $(shell uname)) + +#ifeq ($(os_type),windows32) +#os := Windows +#else +#ifeq ($(os_type),windows64) +#os := Windows +#else +#ifeq ($(os_type),) +#os := Windows +#else +## Default to Linux style operating system. Both Cygwin and mingw are fully +## compatible (for this Makefile) with Linux. +#os := Linux +#endif +#endif +#endif + +ifeq ($(os_type),windows32_64) +os := Windows +else +ifeq ($(os_type),Linux) +os := Linux +else +os := Linux +endif +endif + +# Output documentation directory and configuration file. +docdir := ../doxygen/html +doccfg := ../doxygen/doxyfile.doxygen + +CROSS ?= arm-none-eabi- +AR := $(CROSS)ar +AS := $(CROSS)as +CC := $(CROSS)gcc +CPP := $(CROSS)gcc -E +CXX := $(CROSS)g++ +LD := $(CROSS)g++ +NM := $(CROSS)nm +OBJCOPY := $(CROSS)objcopy +OBJDUMP := $(CROSS)objdump +SIZE := $(CROSS)size +GDB := $(CROSS)gdb + +RM := cs-rm -f +ifeq ($(os),Windows) +#RMDIR := rmdir /S /Q +RMDIR := cs-rm -rf +else +RMDIR := rmdir -p --ignore-fail-on-non-empty +endif + +# Strings for beautifying output +MSG_CLEAN_FILES = "RM *.o *.d" +MSG_CLEAN_DIRS = "RMDIR $(strip $(clean-dirs))" +MSG_CLEAN_DOC = "RMDIR $(docdir)" +MSG_MKDIR = "MKDIR $(dir $@)" + +MSG_INFO = "INFO " + +MSG_ARCHIVING = "AR $@" +MSG_ASSEMBLING = "AS $@" +MSG_BINARY_IMAGE = "OBJCOPY $@" +MSG_COMPILING = "CC $@" +MSG_COMPILING_CXX = "CXX $@" +MSG_EXTENDED_LISTING = "OBJDUMP $@" +MSG_IHEX_IMAGE = "OBJCOPY $@" +MSG_LINKING = "LN $@" +MSG_PREPROCESSING = "CPP $@" +MSG_SIZE = "SIZE $@" +MSG_SYMBOL_TABLE = "NM $@" + +MSG_GENERATING_DOC = "DOXYGEN $(docdir)" + +# Don't use make's built-in rules and variables +MAKEFLAGS += -rR + +# Don't print 'Entering directory ...' +MAKEFLAGS += --no-print-directory + +# Function for reversing the order of a list +reverse = $(if $(1),$(call reverse,$(wordlist 2,$(words $(1)),$(1)))) $(firstword $(1)) + +# Hide command output by default, but allow the user to override this +# by adding V=1 on the command line. +# +# This is inspired by the Kbuild system used by the Linux kernel. +ifdef V + ifeq ("$(origin V)", "command line") + VERBOSE = $(V) + endif +endif +ifndef VERBOSE + VERBOSE = 0 +endif + +ifeq ($(VERBOSE), 1) + Q = +else +# Q = @ + Q = +endif + +arflags-gnu-y := $(ARFLAGS) +asflags-gnu-y := $(ASFLAGS) +cflags-gnu-y := $(CFLAGS) +cxxflags-gnu-y := $(CXXFLAGS) +cppflags-gnu-y := $(CPPFLAGS) +cpuflags-gnu-y := +dbgflags-gnu-y := $(DBGFLAGS) +libflags-gnu-y := $(foreach LIB,$(LIBS),-l$(LIB)) +ldflags-gnu-y := $(LDFLAGS) +flashflags-gnu-y := +clean-files := +clean-dirs := + +clean-files += $(wildcard $(target) $(project).map) +clean-files += $(wildcard $(project).hex $(project).bin) +clean-files += $(wildcard $(project).lss $(project).sym) +clean-files += $(wildcard $(build)) + +# Use pipes instead of temporary files for communication between processes +cflags-gnu-y += -pipe +asflags-gnu-y += -pipe +ldflags-gnu-y += -pipe + +# Archiver flags. +arflags-gnu-y += rcs + +# Always enable warnings. And be very careful about implicit +# declarations. +cflags-gnu-y += -Wall -Wstrict-prototypes -Wmissing-prototypes +cflags-gnu-y += -Werror-implicit-function-declaration +cxxflags-gnu-y += -Wall +# IAR doesn't allow arithmetic on void pointers, so warn about that. +cflags-gnu-y += -Wpointer-arith +cxxflags-gnu-y += -Wpointer-arith + +# Preprocessor flags. +cppflags-gnu-y += $(foreach INC,$(addprefix $(PRJ_PATH)/,$(INC_PATH)),-I$(INC)) +asflags-gnu-y += $(foreach INC,$(addprefix $(PRJ_PATH)/,$(INC_PATH)),'-Wa,-I$(INC)') + +# CPU specific flags. +cpuflags-gnu-y += -mcpu=$(ARCH) -mthumb -D=__$(PART)__ + +# Dependency file flags. +depflags = -MD -MP -MQ $@ + +# Debug specific flags. +ifdef BUILD_DEBUG_LEVEL +dbgflags-gnu-y += -g$(BUILD_DEBUG_LEVEL) +else +dbgflags-gnu-y += -g3 +endif + +# Optimization specific flags. +ifdef BUILD_OPTIMIZATION +optflags-gnu-y = -O$(BUILD_OPTIMIZATION) +else +optflags-gnu-y = $(OPTIMIZATION) +endif + +# Always preprocess assembler files. +asflags-gnu-y += -x assembler-with-cpp +# Compile C files using the GNU99 standard. +cflags-gnu-y += -std=gnu99 +# Compile C++ files using the GNU++98 standard. +cxxflags-gnu-y += -std=gnu++98 + + +# Separate each function and data into its own separate section to allow +# garbage collection of unused sections. +cflags-gnu-y += -ffunction-sections -fdata-sections +cxxflags-gnu-y += -ffunction-sections -fdata-sections + +# Various cflags. +cflags-gnu-y += -Wchar-subscripts -Wcomment -Wformat=2 -Wimplicit-int +cflags-gnu-y += -Wmain -Wparentheses +cflags-gnu-y += -Wsequence-point -Wreturn-type -Wswitch -Wtrigraphs -Wunused +cflags-gnu-y += -Wuninitialized -Wunknown-pragmas -Wfloat-equal +# -Wundef +cflags-gnu-y += -Wshadow -Wbad-function-cast -Wwrite-strings +cflags-gnu-y += -Wsign-compare -Waggregate-return +cflags-gnu-y += -Wmissing-declarations +cflags-gnu-y += -Wformat -Wmissing-format-attribute -Wno-deprecated-declarations +cflags-gnu-y += -Wpacked -Wredundant-decls -Wnested-externs -Winline -Wlong-long +cflags-gnu-y += -Wunreachable-code +cflags-gnu-y += -Wcast-align +cflags-gnu-y += --param max-inline-insns-single=500 + +# To reduce application size use only integer printf function. +cflags-gnu-y += -Dprintf=iprintf + +# Garbage collect unreferred sections when linking. +ldflags-gnu-y += -Wl,--gc-sections + +# Use the linker script if provided by the project. +ifneq ($(strip $(linker_script)),) +ldflags-gnu-y += -Wl,-T $(linker_script) +endif + +# Output a link map file and a cross reference table +ldflags-gnu-y += -Wl,-Map=$(project).map,--cref + +# Add library search paths relative to the top level directory. +ldflags-gnu-y += $(foreach _LIB_PATH,$(addprefix $(PRJ_PATH)/,$(LIB_PATH)),-L$(_LIB_PATH)) + +a_flags = $(cpuflags-gnu-y) $(depflags) $(cppflags-gnu-y) $(asflags-gnu-y) -D__ASSEMBLY__ +c_flags = $(cpuflags-gnu-y) $(dbgflags-gnu-y) $(depflags) $(optflags-gnu-y) $(cppflags-gnu-y) $(cflags-gnu-y) +cxx_flags= $(cpuflags-gnu-y) $(dbgflags-gnu-y) $(depflags) $(optflags-gnu-y) $(cppflags-gnu-y) $(cxxflags-gnu-y) +l_flags = -Wl,--entry=Reset_Handler -Wl,--cref $(cpuflags-gnu-y) $(optflags-gnu-y) $(ldflags-gnu-y) +ar_flags = $(arflags-gnu-y) + +# Source files list and part informations must already be included before +# running this makefile + +# If a custom build directory is specified, use it -- force trailing / in directory name. +ifdef BUILD_DIR + build-dir := $(dir $(BUILD_DIR))$(if $(notdir $(BUILD_DIR)),$(notdir $(BUILD_DIR))/) +else + build-dir = +endif + +# Create object files list from source files list. +obj-y := $(addprefix $(build-dir), $(addsuffix .o,$(basename $(CSRCS) $(ASSRCS)))) +# Create dependency files list from source files list. +dep-files := $(wildcard $(foreach f,$(obj-y),$(basename $(f)).d)) + +clean-files += $(wildcard $(obj-y)) +clean-files += $(dep-files) + +clean-dirs += $(call reverse,$(sort $(wildcard $(dir $(obj-y))))) + +.PHONY: all + +# Default target. +.PHONY: all +ifeq ($(project_type),all) +all: + $(MAKE) all PROJECT_TYPE=flash + $(MAKE) all PROJECT_TYPE=sram +else +ifeq ($(target_type),lib) +all: $(target) $(project).lss $(project).sym +else +ifeq ($(target_type),elf) +all: $(target) $(project).lss $(project).sym $(project).hex $(project).bin +endif +endif +endif + +# Default target. +.PHONY: os +os: + @echo OS '$(OS)' + @echo os type '$(os_type)' + @echo os '$(os)' + @echo '$(findstring Windows,$(OS))' + +# Clean up the project. +.PHONY: clean +clean: + @$(if $(strip $(clean-files)),echo $(MSG_CLEAN_FILES)) + $(if $(strip $(clean-files)),$(Q)$(RM) $(clean-files),) + @$(if $(strip $(clean-dirs)),echo $(MSG_CLEAN_DIRS)) +# Remove created directories, and make sure we only remove existing +# directories, since recursive rmdir might help us a bit on the way. +ifeq ($(os),Windows) + $(Q)$(if $(strip $(clean-dirs)), \ + $(RMDIR) $(strip $(subst /,\,$(clean-dirs)))) +else + $(Q)$(if $(strip $(clean-dirs)), \ + for directory in $(strip $(clean-dirs)); do \ + if [ -d "$$directory" ]; then \ + $(RMDIR) $$directory; \ + fi \ + done \ + ) +endif + +# Rebuild the project. +.PHONY: rebuild +rebuild: clean all + +# Debug the project in flash. +.PHONY: debug_flash +debug_flash: all + $(GDB) -x "$(PRJ_PATH)/$(DEBUG_SCRIPT_FLASH)" -ex "reset" -readnow -se $(TARGET_FLASH) + +# Debug the project in sram. +.PHONY: debug_sram +debug_sram: all + $(GDB) -x "$(PRJ_PATH)/$(DEBUG_SCRIPT_SRAM)" -ex "reset" -readnow -se $(TARGET_SRAM) + +.PHONY: objfiles +objfiles: $(obj-y) + +# Create object files from C source files. +$(build-dir)%.o: %.c $(PRJ_PATH)/sam/utils/make/Makefile.in config.mk + @echo $(MSG_MKDIR) +ifeq ($(os),Windows) + -mkdir $(subst /,\,$(dir $@)) +else + -mkdir -p $(dir $@) +endif + @echo $(MSG_COMPILING) + $(Q)$(CC) $(c_flags) -c $< -o $@ + +# Create object files from C++ source files. +$(build-dir)%.o: %.cpp $(PRJ_PATH)/sam/utils/make/Makefile.in config.mk + @echo $(MSG_MKDIR) +ifeq ($(os),Windows) + -mkdir $(subst /,\,$(dir $@)) +else + -mkdir -p $(dir $@) +endif + @echo $(MSG_COMPILING_CXX) + $(Q)$(CXX) $(cxx_flags) -c $< -o $@ + +# Preprocess and assemble: create object files from assembler source files. +$(build-dir)%.o: %.S $(PRJ_PATH)/sam/utils/make/Makefile.in config.mk + @echo $(MSG_MKDIR) +ifeq ($(os),Windows) + -mkdir $(subst /,\,$(dir $@)) +else + -mkdir -p $(dir $@) +endif + @echo $(MSG_ASSEMBLING) + $(Q)$(CC) $(a_flags) -c $< -o $@ + +# Include all dependency files to add depedency to all header files in use. +include $(dep-files) + +ifeq ($(target_type),lib) +# Archive object files into an archive +$(target): $(PRJ_PATH)/sam/utils/make/Makefile.in config.mk $(obj-y) + @echo $(MSG_ARCHIVING) + $(Q)$(AR) $(ar_flags) $@ $(obj-y) + @echo $(MSG_SIZE) + $(Q)$(SIZE) -Bxt $@ +else +ifeq ($(target_type),elf) +# Link the object files into an ELF file. Also make sure the target is rebuilt +# if the common Makefile.in or project config.mk is changed. +$(target): $(linker_script) $(PRJ_PATH)/sam/utils/make/Makefile.in config.mk $(obj-y) + @echo $(MSG_LINKING) + @echo $(Q)$(LD) $(l_flags) $(obj-y) $(libflags-gnu-y) -o $@ + $(Q)$(LD) $(l_flags) $(obj-y) $(libflags-gnu-y) -o $@ + @echo $(MSG_SIZE) + $(Q)$(SIZE) -Ax $@ + $(Q)$(SIZE) -Bx $@ +endif +endif + +# Create extended function listing from target output file. +%.lss: $(target) + @echo $(MSG_EXTENDED_LISTING) + $(Q)$(OBJDUMP) -h -S $< > $@ + +# Create symbol table from target output file. +%.sym: $(target) + @echo $(MSG_SYMBOL_TABLE) + $(Q)$(NM) -n $< > $@ + +# Create Intel HEX image from ELF output file. +%.hex: $(target) + @echo $(MSG_IHEX_IMAGE) + $(Q)$(OBJCOPY) -O ihex $(flashflags-gnu-y) $< $@ + +# Create binary image from ELF output file. +%.bin: $(target) + @echo $(MSG_BINARY_IMAGE) + $(Q)$(OBJCOPY) -O binary $< $@ + +# Provide information about the detected host operating system. +.SECONDARY: info-os +info-os: + @echo $(MSG_INFO)$(os) build host detected + +# Build Doxygen generated documentation. +.PHONY: doc +doc: + @echo $(MSG_GENERATING_DOC) + $(Q)cd $(dir $(doccfg)) && $(DOCGEN) $(notdir $(doccfg)) + +# Clean Doxygen generated documentation. +.PHONY: cleandoc +cleandoc: + @$(if $(wildcard $(docdir)),echo $(MSG_CLEAN_DOC)) + $(Q)$(if $(wildcard $(docdir)),$(RM) --recursive $(docdir)) + +# Rebuild the Doxygen generated documentation. +.PHONY: rebuilddoc +rebuilddoc: cleandoc doc
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/parts.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/parts.h new file mode 100644 index 0000000..efd0fe8 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/parts.h
@@ -0,0 +1,152 @@ +/** + * \file + * + * \brief Arch file for SAM. + * + * This file defines common SAM series. + * + * Copyright (c) 2011 - 2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _SAM_PARTS_ +#define _SAM_PARTS_ + +/* Convenience macro for checking GCC and IAR part definitions */ +#define part_is_defined(part) (defined(__ ## part ## __)) + +/* SAM3 family */ + +/* SAM3S series */ +#define SAM3S1 ( \ + part_is_defined( SAM3S1A ) || \ + part_is_defined( SAM3S1B ) || \ + part_is_defined( SAM3S1C ) ) + +#define SAM3S2 ( \ + part_is_defined( SAM3S2A ) || \ + part_is_defined( SAM3S2B ) || \ + part_is_defined( SAM3S2C ) ) + +#define SAM3S4 ( \ + part_is_defined( SAM3S4A ) || \ + part_is_defined( SAM3S4B ) || \ + part_is_defined( SAM3S4C ) ) + +#define SAM3S8 ( \ + part_is_defined( SAM3S8B ) || \ + part_is_defined( SAM3S8C ) ) + +#define SAM3SD8 ( \ + part_is_defined( SAM3SD8B ) || \ + part_is_defined( SAM3SD8C ) ) + +#define SAM3U1 ( \ + part_is_defined( SAM3U1C ) || \ + part_is_defined( SAM3U1E ) ) + +#define SAM3U2 ( \ + part_is_defined( SAM3U2C ) || \ + part_is_defined( SAM3U2E ) ) + +#define SAM3U4 ( \ + part_is_defined( SAM3U4C ) || \ + part_is_defined( SAM3U4E ) ) + +#define SAM3N1 ( \ + part_is_defined( SAM3N1A ) || \ + part_is_defined( SAM3N1B ) || \ + part_is_defined( SAM3N1C ) ) + +#define SAM3N2 ( \ + part_is_defined( SAM3N2A ) || \ + part_is_defined( SAM3N2B ) || \ + part_is_defined( SAM3N2C ) ) + +#define SAM3N4 ( \ + part_is_defined( SAM3N4A ) || \ + part_is_defined( SAM3N4B ) || \ + part_is_defined( SAM3N4C ) ) + +#define SAM3X4 ( \ + part_is_defined( SAM3X4C ) || \ + part_is_defined( SAM3X4E ) ) + +#define SAM3X8 ( \ + part_is_defined( SAM3X8C ) || \ + part_is_defined( SAM3X8E ) || \ + part_is_defined( SAM3X8H ) ) + +#define SAM3A4 ( \ + part_is_defined( SAM3A4C ) ) + +#define SAM3A8 ( \ + part_is_defined( SAM3A8C ) ) + +#define SAM4S8 ( \ + part_is_defined( SAM4S8B ) || \ + part_is_defined( SAM4S8C ) ) + +#define SAM4S16 ( \ + part_is_defined( SAM4S16B ) || \ + part_is_defined( SAM4S16C ) ) + +/* Entire SAM3S Family */ +#define SAM3S (SAM3S1 || SAM3S2 || SAM3S4 || SAM3S8 || SAM3SD8) + +/* Entire SAM3U Family */ +#define SAM3U (SAM3U1 || SAM3U2 || SAM3U4) + +/* Entire SAM3N Family */ +#define SAM3N (SAM3N1 || SAM3N2 || SAM3N4) + +/* Entire SAM3XA Family */ +#define SAM3XA (SAM3X4 || SAM3X8 || SAM3A4 || SAM3A8) + +/* SAM9 family */ + +/* SAM7 family */ + +/* Entire SAM4S Family */ +#define SAM4S (SAM4S8 || SAM4S16) + +/* Global SAM product line */ +#define SAM ( SAM3S || SAM3U || SAM3N || SAM3XA || SAM4S) + +#ifdef SAM + #include "io.h" +#endif + +#endif /* _SAM_PARTS_ */
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/preprocessor/mrepeat.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/preprocessor/mrepeat.h new file mode 100644 index 0000000..db3c675 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/preprocessor/mrepeat.h
@@ -0,0 +1,334 @@ +/** + * \file + * + * \brief Preprocessor macro repeating utils. + * + * Copyright (c) 2010-2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _MREPEAT_H_ +#define _MREPEAT_H_ + +/** + * \defgroup group_sam_utils_mrepeat Preprocessor - Macro Repeat + * + * \ingroup group_sam_utils + * + * \{ + */ + +#include "preprocessor.h" + + +//! Maximal number of repetitions supported by MREPEAT. +#define MREPEAT_LIMIT 256 + +/*! \brief Macro repeat. + * + * This macro represents a horizontal repetition construct. + * + * \param count The number of repetitious calls to macro. Valid values range from 0 to MREPEAT_LIMIT. + * \param macro A binary operation of the form macro(n, data). This macro is expanded by MREPEAT with + * the current repetition number and the auxiliary data argument. + * \param data Auxiliary data passed to macro. + * + * \return <tt>macro(0, data) macro(1, data) ... macro(count - 1, data)</tt> + */ +#define MREPEAT(count, macro, data) TPASTE2(MREPEAT, count)(macro, data) + +#define MREPEAT0( macro, data) +#define MREPEAT1( macro, data) MREPEAT0( macro, data) macro( 0, data) +#define MREPEAT2( macro, data) MREPEAT1( macro, data) macro( 1, data) +#define MREPEAT3( macro, data) MREPEAT2( macro, data) macro( 2, data) +#define MREPEAT4( macro, data) MREPEAT3( macro, data) macro( 3, data) +#define MREPEAT5( macro, data) MREPEAT4( macro, data) macro( 4, data) +#define MREPEAT6( macro, data) MREPEAT5( macro, data) macro( 5, data) +#define MREPEAT7( macro, data) MREPEAT6( macro, data) macro( 6, data) +#define MREPEAT8( macro, data) MREPEAT7( macro, data) macro( 7, data) +#define MREPEAT9( macro, data) MREPEAT8( macro, data) macro( 8, data) +#define MREPEAT10( macro, data) MREPEAT9( macro, data) macro( 9, data) +#define MREPEAT11( macro, data) MREPEAT10( macro, data) macro( 10, data) +#define MREPEAT12( macro, data) MREPEAT11( macro, data) macro( 11, data) +#define MREPEAT13( macro, data) MREPEAT12( macro, data) macro( 12, data) +#define MREPEAT14( macro, data) MREPEAT13( macro, data) macro( 13, data) +#define MREPEAT15( macro, data) MREPEAT14( macro, data) macro( 14, data) +#define MREPEAT16( macro, data) MREPEAT15( macro, data) macro( 15, data) +#define MREPEAT17( macro, data) MREPEAT16( macro, data) macro( 16, data) +#define MREPEAT18( macro, data) MREPEAT17( macro, data) macro( 17, data) +#define MREPEAT19( macro, data) MREPEAT18( macro, data) macro( 18, data) +#define MREPEAT20( macro, data) MREPEAT19( macro, data) macro( 19, data) +#define MREPEAT21( macro, data) MREPEAT20( macro, data) macro( 20, data) +#define MREPEAT22( macro, data) MREPEAT21( macro, data) macro( 21, data) +#define MREPEAT23( macro, data) MREPEAT22( macro, data) macro( 22, data) +#define MREPEAT24( macro, data) MREPEAT23( macro, data) macro( 23, data) +#define MREPEAT25( macro, data) MREPEAT24( macro, data) macro( 24, data) +#define MREPEAT26( macro, data) MREPEAT25( macro, data) macro( 25, data) +#define MREPEAT27( macro, data) MREPEAT26( macro, data) macro( 26, data) +#define MREPEAT28( macro, data) MREPEAT27( macro, data) macro( 27, data) +#define MREPEAT29( macro, data) MREPEAT28( macro, data) macro( 28, data) +#define MREPEAT30( macro, data) MREPEAT29( macro, data) macro( 29, data) +#define MREPEAT31( macro, data) MREPEAT30( macro, data) macro( 30, data) +#define MREPEAT32( macro, data) MREPEAT31( macro, data) macro( 31, data) +#define MREPEAT33( macro, data) MREPEAT32( macro, data) macro( 32, data) +#define MREPEAT34( macro, data) MREPEAT33( macro, data) macro( 33, data) +#define MREPEAT35( macro, data) MREPEAT34( macro, data) macro( 34, data) +#define MREPEAT36( macro, data) MREPEAT35( macro, data) macro( 35, data) +#define MREPEAT37( macro, data) MREPEAT36( macro, data) macro( 36, data) +#define MREPEAT38( macro, data) MREPEAT37( macro, data) macro( 37, data) +#define MREPEAT39( macro, data) MREPEAT38( macro, data) macro( 38, data) +#define MREPEAT40( macro, data) MREPEAT39( macro, data) macro( 39, data) +#define MREPEAT41( macro, data) MREPEAT40( macro, data) macro( 40, data) +#define MREPEAT42( macro, data) MREPEAT41( macro, data) macro( 41, data) +#define MREPEAT43( macro, data) MREPEAT42( macro, data) macro( 42, data) +#define MREPEAT44( macro, data) MREPEAT43( macro, data) macro( 43, data) +#define MREPEAT45( macro, data) MREPEAT44( macro, data) macro( 44, data) +#define MREPEAT46( macro, data) MREPEAT45( macro, data) macro( 45, data) +#define MREPEAT47( macro, data) MREPEAT46( macro, data) macro( 46, data) +#define MREPEAT48( macro, data) MREPEAT47( macro, data) macro( 47, data) +#define MREPEAT49( macro, data) MREPEAT48( macro, data) macro( 48, data) +#define MREPEAT50( macro, data) MREPEAT49( macro, data) macro( 49, data) +#define MREPEAT51( macro, data) MREPEAT50( macro, data) macro( 50, data) +#define MREPEAT52( macro, data) MREPEAT51( macro, data) macro( 51, data) +#define MREPEAT53( macro, data) MREPEAT52( macro, data) macro( 52, data) +#define MREPEAT54( macro, data) MREPEAT53( macro, data) macro( 53, data) +#define MREPEAT55( macro, data) MREPEAT54( macro, data) macro( 54, data) +#define MREPEAT56( macro, data) MREPEAT55( macro, data) macro( 55, data) +#define MREPEAT57( macro, data) MREPEAT56( macro, data) macro( 56, data) +#define MREPEAT58( macro, data) MREPEAT57( macro, data) macro( 57, data) +#define MREPEAT59( macro, data) MREPEAT58( macro, data) macro( 58, data) +#define MREPEAT60( macro, data) MREPEAT59( macro, data) macro( 59, data) +#define MREPEAT61( macro, data) MREPEAT60( macro, data) macro( 60, data) +#define MREPEAT62( macro, data) MREPEAT61( macro, data) macro( 61, data) +#define MREPEAT63( macro, data) MREPEAT62( macro, data) macro( 62, data) +#define MREPEAT64( macro, data) MREPEAT63( macro, data) macro( 63, data) +#define MREPEAT65( macro, data) MREPEAT64( macro, data) macro( 64, data) +#define MREPEAT66( macro, data) MREPEAT65( macro, data) macro( 65, data) +#define MREPEAT67( macro, data) MREPEAT66( macro, data) macro( 66, data) +#define MREPEAT68( macro, data) MREPEAT67( macro, data) macro( 67, data) +#define MREPEAT69( macro, data) MREPEAT68( macro, data) macro( 68, data) +#define MREPEAT70( macro, data) MREPEAT69( macro, data) macro( 69, data) +#define MREPEAT71( macro, data) MREPEAT70( macro, data) macro( 70, data) +#define MREPEAT72( macro, data) MREPEAT71( macro, data) macro( 71, data) +#define MREPEAT73( macro, data) MREPEAT72( macro, data) macro( 72, data) +#define MREPEAT74( macro, data) MREPEAT73( macro, data) macro( 73, data) +#define MREPEAT75( macro, data) MREPEAT74( macro, data) macro( 74, data) +#define MREPEAT76( macro, data) MREPEAT75( macro, data) macro( 75, data) +#define MREPEAT77( macro, data) MREPEAT76( macro, data) macro( 76, data) +#define MREPEAT78( macro, data) MREPEAT77( macro, data) macro( 77, data) +#define MREPEAT79( macro, data) MREPEAT78( macro, data) macro( 78, data) +#define MREPEAT80( macro, data) MREPEAT79( macro, data) macro( 79, data) +#define MREPEAT81( macro, data) MREPEAT80( macro, data) macro( 80, data) +#define MREPEAT82( macro, data) MREPEAT81( macro, data) macro( 81, data) +#define MREPEAT83( macro, data) MREPEAT82( macro, data) macro( 82, data) +#define MREPEAT84( macro, data) MREPEAT83( macro, data) macro( 83, data) +#define MREPEAT85( macro, data) MREPEAT84( macro, data) macro( 84, data) +#define MREPEAT86( macro, data) MREPEAT85( macro, data) macro( 85, data) +#define MREPEAT87( macro, data) MREPEAT86( macro, data) macro( 86, data) +#define MREPEAT88( macro, data) MREPEAT87( macro, data) macro( 87, data) +#define MREPEAT89( macro, data) MREPEAT88( macro, data) macro( 88, data) +#define MREPEAT90( macro, data) MREPEAT89( macro, data) macro( 89, data) +#define MREPEAT91( macro, data) MREPEAT90( macro, data) macro( 90, data) +#define MREPEAT92( macro, data) MREPEAT91( macro, data) macro( 91, data) +#define MREPEAT93( macro, data) MREPEAT92( macro, data) macro( 92, data) +#define MREPEAT94( macro, data) MREPEAT93( macro, data) macro( 93, data) +#define MREPEAT95( macro, data) MREPEAT94( macro, data) macro( 94, data) +#define MREPEAT96( macro, data) MREPEAT95( macro, data) macro( 95, data) +#define MREPEAT97( macro, data) MREPEAT96( macro, data) macro( 96, data) +#define MREPEAT98( macro, data) MREPEAT97( macro, data) macro( 97, data) +#define MREPEAT99( macro, data) MREPEAT98( macro, data) macro( 98, data) +#define MREPEAT100(macro, data) MREPEAT99( macro, data) macro( 99, data) +#define MREPEAT101(macro, data) MREPEAT100(macro, data) macro(100, data) +#define MREPEAT102(macro, data) MREPEAT101(macro, data) macro(101, data) +#define MREPEAT103(macro, data) MREPEAT102(macro, data) macro(102, data) +#define MREPEAT104(macro, data) MREPEAT103(macro, data) macro(103, data) +#define MREPEAT105(macro, data) MREPEAT104(macro, data) macro(104, data) +#define MREPEAT106(macro, data) MREPEAT105(macro, data) macro(105, data) +#define MREPEAT107(macro, data) MREPEAT106(macro, data) macro(106, data) +#define MREPEAT108(macro, data) MREPEAT107(macro, data) macro(107, data) +#define MREPEAT109(macro, data) MREPEAT108(macro, data) macro(108, data) +#define MREPEAT110(macro, data) MREPEAT109(macro, data) macro(109, data) +#define MREPEAT111(macro, data) MREPEAT110(macro, data) macro(110, data) +#define MREPEAT112(macro, data) MREPEAT111(macro, data) macro(111, data) +#define MREPEAT113(macro, data) MREPEAT112(macro, data) macro(112, data) +#define MREPEAT114(macro, data) MREPEAT113(macro, data) macro(113, data) +#define MREPEAT115(macro, data) MREPEAT114(macro, data) macro(114, data) +#define MREPEAT116(macro, data) MREPEAT115(macro, data) macro(115, data) +#define MREPEAT117(macro, data) MREPEAT116(macro, data) macro(116, data) +#define MREPEAT118(macro, data) MREPEAT117(macro, data) macro(117, data) +#define MREPEAT119(macro, data) MREPEAT118(macro, data) macro(118, data) +#define MREPEAT120(macro, data) MREPEAT119(macro, data) macro(119, data) +#define MREPEAT121(macro, data) MREPEAT120(macro, data) macro(120, data) +#define MREPEAT122(macro, data) MREPEAT121(macro, data) macro(121, data) +#define MREPEAT123(macro, data) MREPEAT122(macro, data) macro(122, data) +#define MREPEAT124(macro, data) MREPEAT123(macro, data) macro(123, data) +#define MREPEAT125(macro, data) MREPEAT124(macro, data) macro(124, data) +#define MREPEAT126(macro, data) MREPEAT125(macro, data) macro(125, data) +#define MREPEAT127(macro, data) MREPEAT126(macro, data) macro(126, data) +#define MREPEAT128(macro, data) MREPEAT127(macro, data) macro(127, data) +#define MREPEAT129(macro, data) MREPEAT128(macro, data) macro(128, data) +#define MREPEAT130(macro, data) MREPEAT129(macro, data) macro(129, data) +#define MREPEAT131(macro, data) MREPEAT130(macro, data) macro(130, data) +#define MREPEAT132(macro, data) MREPEAT131(macro, data) macro(131, data) +#define MREPEAT133(macro, data) MREPEAT132(macro, data) macro(132, data) +#define MREPEAT134(macro, data) MREPEAT133(macro, data) macro(133, data) +#define MREPEAT135(macro, data) MREPEAT134(macro, data) macro(134, data) +#define MREPEAT136(macro, data) MREPEAT135(macro, data) macro(135, data) +#define MREPEAT137(macro, data) MREPEAT136(macro, data) macro(136, data) +#define MREPEAT138(macro, data) MREPEAT137(macro, data) macro(137, data) +#define MREPEAT139(macro, data) MREPEAT138(macro, data) macro(138, data) +#define MREPEAT140(macro, data) MREPEAT139(macro, data) macro(139, data) +#define MREPEAT141(macro, data) MREPEAT140(macro, data) macro(140, data) +#define MREPEAT142(macro, data) MREPEAT141(macro, data) macro(141, data) +#define MREPEAT143(macro, data) MREPEAT142(macro, data) macro(142, data) +#define MREPEAT144(macro, data) MREPEAT143(macro, data) macro(143, data) +#define MREPEAT145(macro, data) MREPEAT144(macro, data) macro(144, data) +#define MREPEAT146(macro, data) MREPEAT145(macro, data) macro(145, data) +#define MREPEAT147(macro, data) MREPEAT146(macro, data) macro(146, data) +#define MREPEAT148(macro, data) MREPEAT147(macro, data) macro(147, data) +#define MREPEAT149(macro, data) MREPEAT148(macro, data) macro(148, data) +#define MREPEAT150(macro, data) MREPEAT149(macro, data) macro(149, data) +#define MREPEAT151(macro, data) MREPEAT150(macro, data) macro(150, data) +#define MREPEAT152(macro, data) MREPEAT151(macro, data) macro(151, data) +#define MREPEAT153(macro, data) MREPEAT152(macro, data) macro(152, data) +#define MREPEAT154(macro, data) MREPEAT153(macro, data) macro(153, data) +#define MREPEAT155(macro, data) MREPEAT154(macro, data) macro(154, data) +#define MREPEAT156(macro, data) MREPEAT155(macro, data) macro(155, data) +#define MREPEAT157(macro, data) MREPEAT156(macro, data) macro(156, data) +#define MREPEAT158(macro, data) MREPEAT157(macro, data) macro(157, data) +#define MREPEAT159(macro, data) MREPEAT158(macro, data) macro(158, data) +#define MREPEAT160(macro, data) MREPEAT159(macro, data) macro(159, data) +#define MREPEAT161(macro, data) MREPEAT160(macro, data) macro(160, data) +#define MREPEAT162(macro, data) MREPEAT161(macro, data) macro(161, data) +#define MREPEAT163(macro, data) MREPEAT162(macro, data) macro(162, data) +#define MREPEAT164(macro, data) MREPEAT163(macro, data) macro(163, data) +#define MREPEAT165(macro, data) MREPEAT164(macro, data) macro(164, data) +#define MREPEAT166(macro, data) MREPEAT165(macro, data) macro(165, data) +#define MREPEAT167(macro, data) MREPEAT166(macro, data) macro(166, data) +#define MREPEAT168(macro, data) MREPEAT167(macro, data) macro(167, data) +#define MREPEAT169(macro, data) MREPEAT168(macro, data) macro(168, data) +#define MREPEAT170(macro, data) MREPEAT169(macro, data) macro(169, data) +#define MREPEAT171(macro, data) MREPEAT170(macro, data) macro(170, data) +#define MREPEAT172(macro, data) MREPEAT171(macro, data) macro(171, data) +#define MREPEAT173(macro, data) MREPEAT172(macro, data) macro(172, data) +#define MREPEAT174(macro, data) MREPEAT173(macro, data) macro(173, data) +#define MREPEAT175(macro, data) MREPEAT174(macro, data) macro(174, data) +#define MREPEAT176(macro, data) MREPEAT175(macro, data) macro(175, data) +#define MREPEAT177(macro, data) MREPEAT176(macro, data) macro(176, data) +#define MREPEAT178(macro, data) MREPEAT177(macro, data) macro(177, data) +#define MREPEAT179(macro, data) MREPEAT178(macro, data) macro(178, data) +#define MREPEAT180(macro, data) MREPEAT179(macro, data) macro(179, data) +#define MREPEAT181(macro, data) MREPEAT180(macro, data) macro(180, data) +#define MREPEAT182(macro, data) MREPEAT181(macro, data) macro(181, data) +#define MREPEAT183(macro, data) MREPEAT182(macro, data) macro(182, data) +#define MREPEAT184(macro, data) MREPEAT183(macro, data) macro(183, data) +#define MREPEAT185(macro, data) MREPEAT184(macro, data) macro(184, data) +#define MREPEAT186(macro, data) MREPEAT185(macro, data) macro(185, data) +#define MREPEAT187(macro, data) MREPEAT186(macro, data) macro(186, data) +#define MREPEAT188(macro, data) MREPEAT187(macro, data) macro(187, data) +#define MREPEAT189(macro, data) MREPEAT188(macro, data) macro(188, data) +#define MREPEAT190(macro, data) MREPEAT189(macro, data) macro(189, data) +#define MREPEAT191(macro, data) MREPEAT190(macro, data) macro(190, data) +#define MREPEAT192(macro, data) MREPEAT191(macro, data) macro(191, data) +#define MREPEAT193(macro, data) MREPEAT192(macro, data) macro(192, data) +#define MREPEAT194(macro, data) MREPEAT193(macro, data) macro(193, data) +#define MREPEAT195(macro, data) MREPEAT194(macro, data) macro(194, data) +#define MREPEAT196(macro, data) MREPEAT195(macro, data) macro(195, data) +#define MREPEAT197(macro, data) MREPEAT196(macro, data) macro(196, data) +#define MREPEAT198(macro, data) MREPEAT197(macro, data) macro(197, data) +#define MREPEAT199(macro, data) MREPEAT198(macro, data) macro(198, data) +#define MREPEAT200(macro, data) MREPEAT199(macro, data) macro(199, data) +#define MREPEAT201(macro, data) MREPEAT200(macro, data) macro(200, data) +#define MREPEAT202(macro, data) MREPEAT201(macro, data) macro(201, data) +#define MREPEAT203(macro, data) MREPEAT202(macro, data) macro(202, data) +#define MREPEAT204(macro, data) MREPEAT203(macro, data) macro(203, data) +#define MREPEAT205(macro, data) MREPEAT204(macro, data) macro(204, data) +#define MREPEAT206(macro, data) MREPEAT205(macro, data) macro(205, data) +#define MREPEAT207(macro, data) MREPEAT206(macro, data) macro(206, data) +#define MREPEAT208(macro, data) MREPEAT207(macro, data) macro(207, data) +#define MREPEAT209(macro, data) MREPEAT208(macro, data) macro(208, data) +#define MREPEAT210(macro, data) MREPEAT209(macro, data) macro(209, data) +#define MREPEAT211(macro, data) MREPEAT210(macro, data) macro(210, data) +#define MREPEAT212(macro, data) MREPEAT211(macro, data) macro(211, data) +#define MREPEAT213(macro, data) MREPEAT212(macro, data) macro(212, data) +#define MREPEAT214(macro, data) MREPEAT213(macro, data) macro(213, data) +#define MREPEAT215(macro, data) MREPEAT214(macro, data) macro(214, data) +#define MREPEAT216(macro, data) MREPEAT215(macro, data) macro(215, data) +#define MREPEAT217(macro, data) MREPEAT216(macro, data) macro(216, data) +#define MREPEAT218(macro, data) MREPEAT217(macro, data) macro(217, data) +#define MREPEAT219(macro, data) MREPEAT218(macro, data) macro(218, data) +#define MREPEAT220(macro, data) MREPEAT219(macro, data) macro(219, data) +#define MREPEAT221(macro, data) MREPEAT220(macro, data) macro(220, data) +#define MREPEAT222(macro, data) MREPEAT221(macro, data) macro(221, data) +#define MREPEAT223(macro, data) MREPEAT222(macro, data) macro(222, data) +#define MREPEAT224(macro, data) MREPEAT223(macro, data) macro(223, data) +#define MREPEAT225(macro, data) MREPEAT224(macro, data) macro(224, data) +#define MREPEAT226(macro, data) MREPEAT225(macro, data) macro(225, data) +#define MREPEAT227(macro, data) MREPEAT226(macro, data) macro(226, data) +#define MREPEAT228(macro, data) MREPEAT227(macro, data) macro(227, data) +#define MREPEAT229(macro, data) MREPEAT228(macro, data) macro(228, data) +#define MREPEAT230(macro, data) MREPEAT229(macro, data) macro(229, data) +#define MREPEAT231(macro, data) MREPEAT230(macro, data) macro(230, data) +#define MREPEAT232(macro, data) MREPEAT231(macro, data) macro(231, data) +#define MREPEAT233(macro, data) MREPEAT232(macro, data) macro(232, data) +#define MREPEAT234(macro, data) MREPEAT233(macro, data) macro(233, data) +#define MREPEAT235(macro, data) MREPEAT234(macro, data) macro(234, data) +#define MREPEAT236(macro, data) MREPEAT235(macro, data) macro(235, data) +#define MREPEAT237(macro, data) MREPEAT236(macro, data) macro(236, data) +#define MREPEAT238(macro, data) MREPEAT237(macro, data) macro(237, data) +#define MREPEAT239(macro, data) MREPEAT238(macro, data) macro(238, data) +#define MREPEAT240(macro, data) MREPEAT239(macro, data) macro(239, data) +#define MREPEAT241(macro, data) MREPEAT240(macro, data) macro(240, data) +#define MREPEAT242(macro, data) MREPEAT241(macro, data) macro(241, data) +#define MREPEAT243(macro, data) MREPEAT242(macro, data) macro(242, data) +#define MREPEAT244(macro, data) MREPEAT243(macro, data) macro(243, data) +#define MREPEAT245(macro, data) MREPEAT244(macro, data) macro(244, data) +#define MREPEAT246(macro, data) MREPEAT245(macro, data) macro(245, data) +#define MREPEAT247(macro, data) MREPEAT246(macro, data) macro(246, data) +#define MREPEAT248(macro, data) MREPEAT247(macro, data) macro(247, data) +#define MREPEAT249(macro, data) MREPEAT248(macro, data) macro(248, data) +#define MREPEAT250(macro, data) MREPEAT249(macro, data) macro(249, data) +#define MREPEAT251(macro, data) MREPEAT250(macro, data) macro(250, data) +#define MREPEAT252(macro, data) MREPEAT251(macro, data) macro(251, data) +#define MREPEAT253(macro, data) MREPEAT252(macro, data) macro(252, data) +#define MREPEAT254(macro, data) MREPEAT253(macro, data) macro(253, data) +#define MREPEAT255(macro, data) MREPEAT254(macro, data) macro(254, data) +#define MREPEAT256(macro, data) MREPEAT255(macro, data) macro(255, data) + +/** + * \} + */ + +#endif // _MREPEAT_H_
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/preprocessor/preprocessor.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/preprocessor/preprocessor.h new file mode 100644 index 0000000..53763b9 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/preprocessor/preprocessor.h
@@ -0,0 +1,50 @@ +/** + * \file + * + * \brief Preprocessor utils. + * + * Copyright (c) 2010-2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _PREPROCESSOR_H_ +#define _PREPROCESSOR_H_ + +#include "tpaste.h" +#include "stringz.h" +#include "mrepeat.h" + + +#endif // _PREPROCESSOR_H_
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/preprocessor/stringz.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/preprocessor/stringz.h new file mode 100644 index 0000000..4bb22d1 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/preprocessor/stringz.h
@@ -0,0 +1,80 @@ +/** + * \file + * + * \brief Preprocessor stringizing utils. + * + * Copyright (c) 2010-2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _STRINGZ_H_ +#define _STRINGZ_H_ + +/** + * \defgroup group_sam_utils_stringz Preprocessor - Stringize + * + * \ingroup group_sam_utils + * + * \{ + */ + +/*! \brief Stringize. + * + * Stringize a preprocessing token, this token being allowed to be \#defined. + * + * May be used only within macros with the token passed as an argument if the token is \#defined. + * + * For example, writing STRINGZ(PIN) within a macro \#defined by PIN_NAME(PIN) + * and invoked as PIN_NAME(PIN0) with PIN0 \#defined as A0 is equivalent to + * writing "A0". + */ +#define STRINGZ(x) #x + +/*! \brief Absolute stringize. + * + * Stringize a preprocessing token, this token being allowed to be \#defined. + * + * No restriction of use if the token is \#defined. + * + * For example, writing ASTRINGZ(PIN0) anywhere with PIN0 \#defined as A0 is + * equivalent to writing "A0". + */ +#define ASTRINGZ(x) STRINGZ(x) + +/** + * \} + */ + +#endif // _STRINGZ_H_
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/preprocessor/tpaste.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/preprocessor/tpaste.h new file mode 100644 index 0000000..0c746e7 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/preprocessor/tpaste.h
@@ -0,0 +1,100 @@ +/** + * \file + * + * \brief Preprocessor token pasting utils. + * + * Copyright (c) 2010-2012 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef _TPASTE_H_ +#define _TPASTE_H_ + +/** + * \defgroup group_sam_utils_tpaste Preprocessor - Token Paste + * + * \ingroup group_sam_utils + * + * \{ + */ + +/*! \name Token Paste + * + * Paste N preprocessing tokens together, these tokens being allowed to be \#defined. + * + * May be used only within macros with the tokens passed as arguments if the tokens are \#defined. + * + * For example, writing TPASTE2(U, WIDTH) within a macro \#defined by + * UTYPE(WIDTH) and invoked as UTYPE(UL_WIDTH) with UL_WIDTH \#defined as 32 is + * equivalent to writing U32. + */ +//! @{ +#define TPASTE2( a, b) a##b +#define TPASTE3( a, b, c) a##b##c +#define TPASTE4( a, b, c, d) a##b##c##d +#define TPASTE5( a, b, c, d, e) a##b##c##d##e +#define TPASTE6( a, b, c, d, e, f) a##b##c##d##e##f +#define TPASTE7( a, b, c, d, e, f, g) a##b##c##d##e##f##g +#define TPASTE8( a, b, c, d, e, f, g, h) a##b##c##d##e##f##g##h +#define TPASTE9( a, b, c, d, e, f, g, h, i) a##b##c##d##e##f##g##h##i +#define TPASTE10(a, b, c, d, e, f, g, h, i, j) a##b##c##d##e##f##g##h##i##j +//! @} + +/*! \name Absolute Token Paste + * + * Paste N preprocessing tokens together, these tokens being allowed to be \#defined. + * + * No restriction of use if the tokens are \#defined. + * + * For example, writing ATPASTE2(U, UL_WIDTH) anywhere with UL_WIDTH \#defined + * as 32 is equivalent to writing U32. + */ +//! @{ +#define ATPASTE2( a, b) TPASTE2( a, b) +#define ATPASTE3( a, b, c) TPASTE3( a, b, c) +#define ATPASTE4( a, b, c, d) TPASTE4( a, b, c, d) +#define ATPASTE5( a, b, c, d, e) TPASTE5( a, b, c, d, e) +#define ATPASTE6( a, b, c, d, e, f) TPASTE6( a, b, c, d, e, f) +#define ATPASTE7( a, b, c, d, e, f, g) TPASTE7( a, b, c, d, e, f, g) +#define ATPASTE8( a, b, c, d, e, f, g, h) TPASTE8( a, b, c, d, e, f, g, h) +#define ATPASTE9( a, b, c, d, e, f, g, h, i) TPASTE9( a, b, c, d, e, f, g, h, i) +#define ATPASTE10(a, b, c, d, e, f, g, h, i, j) TPASTE10(a, b, c, d, e, f, g, h, i, j) +//! @} + +/** + * \} + */ + +#endif // _TPASTE_H_
diff --git a/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/status_codes.h b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/status_codes.h new file mode 100644 index 0000000..2e44976 --- /dev/null +++ b/Demo/CORTEX_M4_ATSAM4S_AVR_Studio/src/asf/sam/utils/status_codes.h
@@ -0,0 +1,85 @@ +/** + * \file + * + * \brief Status code definitions. + * + * This file defines various status codes returned by functions, + * indicating success or failure as well as what kind of failure. + * + * Copyright (c) 2011 Atmel Corporation. All rights reserved. + * + * \asf_license_start + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * + * 3. The name of Atmel may not be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * 4. This software may only be redistributed and used in connection with an + * Atmel microcontroller product. + * + * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE + * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + * \asf_license_stop + * + */ + +#ifndef STATUS_CODES_H_INCLUDED +#define STATUS_CODES_H_INCLUDED + +/** + * Status code that may be returned by shell commands and protocol + * implementations. + * + * \note Any change to these status codes and the corresponding + * message strings is strictly forbidden. New codes can be added, + * however, but make sure that any message string tables are updated + * at the same time. + */ +enum status_code { + STATUS_OK = 0, //!< Success + ERR_IO_ERROR = -1, //!< I/O error + ERR_FLUSHED = -2, //!< Request flushed from queue + ERR_TIMEOUT = -3, //!< Operation timed out + ERR_BAD_DATA = -4, //!< Data integrity check failed + ERR_PROTOCOL = -5, //!< Protocol error + ERR_UNSUPPORTED_DEV = -6, //!< Unsupported device + ERR_NO_MEMORY = -7, //!< Insufficient memory + ERR_INVALID_ARG = -8, //!< Invalid argument + ERR_BAD_ADDRESS = -9, //!< Bad address + ERR_BUSY = -10, //!< Resource is busy + ERR_BAD_FORMAT = -11, //!< Data format not recognized + + /** + * \brief Operation in progress + * + * This status code is for driver-internal use when an operation + * is currently being performed. + * + * \note Drivers should never return this status code to any + * callers. It is strictly for internal use. + */ + OPERATION_IN_PROGRESS = -128, +}; + +typedef enum status_code status_code_t; + +#endif /* STATUS_CODES_H_INCLUDED */