Revert formatting on Tasking ports (#887)
Co-authored-by: Rahul Kar <118818625+kar-rahul-aws@users.noreply.github.com>
Co-authored-by: Gaurav-Aggarwal-AWS <33462878+aggarg@users.noreply.github.com>
diff --git a/portable/Tasking/ARM_CM4F/port.c b/portable/Tasking/ARM_CM4F/port.c
index bc01af9..df79a9a 100644
--- a/portable/Tasking/ARM_CM4F/port.c
+++ b/portable/Tasking/ARM_CM4F/port.c
@@ -35,26 +35,26 @@
#include "task.h"
/* Constants required to manipulate the NVIC. */
-#define portNVIC_SYSTICK_CTRL ( ( volatile uint32_t * ) 0xe000e010 )
-#define portNVIC_SYSTICK_LOAD ( ( volatile uint32_t * ) 0xe000e014 )
-#define portNVIC_SHPR3_REG ( ( volatile uint32_t * ) 0xe000ed20 )
-#define portNVIC_SYSTICK_CLK 0x00000004
-#define portNVIC_SYSTICK_INT 0x00000002
-#define portNVIC_SYSTICK_ENABLE 0x00000001
-#define portMIN_INTERRUPT_PRIORITY ( 255UL )
-#define portNVIC_PENDSV_PRI ( ( ( uint32_t ) portMIN_INTERRUPT_PRIORITY ) << 16UL )
-#define portNVIC_SYSTICK_PRI ( ( ( uint32_t ) portMIN_INTERRUPT_PRIORITY ) << 24UL )
+#define portNVIC_SYSTICK_CTRL ( ( volatile uint32_t * ) 0xe000e010 )
+#define portNVIC_SYSTICK_LOAD ( ( volatile uint32_t * ) 0xe000e014 )
+#define portNVIC_SHPR3_REG ( ( volatile uint32_t * ) 0xe000ed20 )
+#define portNVIC_SYSTICK_CLK 0x00000004
+#define portNVIC_SYSTICK_INT 0x00000002
+#define portNVIC_SYSTICK_ENABLE 0x00000001
+#define portMIN_INTERRUPT_PRIORITY ( 255UL )
+#define portNVIC_PENDSV_PRI ( ( ( uint32_t ) portMIN_INTERRUPT_PRIORITY ) << 16UL )
+#define portNVIC_SYSTICK_PRI ( ( ( uint32_t ) portMIN_INTERRUPT_PRIORITY ) << 24UL )
/* Masks off all bits but the VECTACTIVE bits in the ICSR register. */
-#define portVECTACTIVE_MASK ( 0xFFUL )
+#define portVECTACTIVE_MASK ( 0xFFUL )
/* Constants required to manipulate the VFP. */
-#define portFPCCR ( ( volatile uint32_t * ) 0xe000ef34 ) /* Floating point context control register. */
-#define portASPEN_AND_LSPEN_BITS ( 0x3UL << 30UL )
+#define portFPCCR ( ( volatile uint32_t * ) 0xe000ef34 ) /* Floating point context control register. */
+#define portASPEN_AND_LSPEN_BITS ( 0x3UL << 30UL )
/* Constants required to set up the initial stack. */
-#define portINITIAL_XPSR ( 0x01000000 )
-#define portINITIAL_EXC_RETURN ( 0xfffffffd )
+#define portINITIAL_XPSR ( 0x01000000 )
+#define portINITIAL_EXC_RETURN ( 0xfffffffd )
/* Let the user override the pre-loading of the initial LR with the address of
* prvTaskExitError() in case it messes up unwinding of the stack in the
@@ -272,4 +272,4 @@
/* Configure SysTick to interrupt at the requested rate. */
*( portNVIC_SYSTICK_LOAD ) = ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL;
*( portNVIC_SYSTICK_CTRL ) = portNVIC_SYSTICK_CLK | portNVIC_SYSTICK_INT | portNVIC_SYSTICK_ENABLE;
-}
+}
\ No newline at end of file
diff --git a/portable/Tasking/ARM_CM4F/portmacro.h b/portable/Tasking/ARM_CM4F/portmacro.h
index 516d856..243e685 100644
--- a/portable/Tasking/ARM_CM4F/portmacro.h
+++ b/portable/Tasking/ARM_CM4F/portmacro.h
@@ -28,7 +28,7 @@
#ifndef PORTMACRO_H
-#define PORTMACRO_H
+ #define PORTMACRO_H
/* *INDENT-OFF* */
#ifdef __cplusplus
@@ -47,38 +47,38 @@
*/
/* Type definitions. */
-#define portCHAR char
-#define portFLOAT float
-#define portDOUBLE double
-#define portLONG long
-#define portSHORT short
-#define portSTACK_TYPE uint32_t
-#define portBASE_TYPE long
+ #define portCHAR char
+ #define portFLOAT float
+ #define portDOUBLE double
+ #define portLONG long
+ #define portSHORT short
+ #define portSTACK_TYPE uint32_t
+ #define portBASE_TYPE long
-typedef portSTACK_TYPE StackType_t;
-typedef long BaseType_t;
-typedef unsigned long UBaseType_t;
+ typedef portSTACK_TYPE StackType_t;
+ typedef long BaseType_t;
+ typedef unsigned long UBaseType_t;
-#if ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_16_BITS )
- typedef uint16_t TickType_t;
- #define portMAX_DELAY ( TickType_t ) 0xffff
-#elif ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_32_BITS )
- typedef uint32_t TickType_t;
- #define portMAX_DELAY ( TickType_t ) 0xffffffffUL
+ #if ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_16_BITS )
+ typedef uint16_t TickType_t;
+ #define portMAX_DELAY ( TickType_t ) 0xffff
+ #elif ( configTICK_TYPE_WIDTH_IN_BITS == TICK_TYPE_WIDTH_32_BITS )
+ typedef uint32_t TickType_t;
+ #define portMAX_DELAY ( TickType_t ) 0xffffffffUL
/* 32-bit tick type on a 32-bit architecture, so reads of the tick count do
* not need to be guarded with a critical section. */
- #define portTICK_TYPE_IS_ATOMIC 1
-#else
- #error configTICK_TYPE_WIDTH_IN_BITS set to unsupported tick type width.
-#endif
+ #define portTICK_TYPE_IS_ATOMIC 1
+ #else
+ #error configTICK_TYPE_WIDTH_IN_BITS set to unsupported tick type width.
+ #endif
/*-----------------------------------------------------------*/
/* Architecture specifics. */
-#define portSTACK_GROWTH ( -1 )
-#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
-#define portBYTE_ALIGNMENT 8
+ #define portSTACK_GROWTH ( -1 )
+ #define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ )
+ #define portBYTE_ALIGNMENT 8
/*-----------------------------------------------------------*/
@@ -111,36 +111,36 @@
* Set basepri to portMAX_SYSCALL_INTERRUPT_PRIORITY without effecting other
* registers. r0 is clobbered.
*/
-#define portSET_INTERRUPT_MASK() __set_BASEPRI( configMAX_SYSCALL_INTERRUPT_PRIORITY )
+ #define portSET_INTERRUPT_MASK() __set_BASEPRI( configMAX_SYSCALL_INTERRUPT_PRIORITY )
/*
* Set basepri back to 0 without effective other registers.
* r0 is clobbered. FAQ: Setting BASEPRI to 0 is not a bug. Please see
* https://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html before disagreeing.
*/
-#define portCLEAR_INTERRUPT_MASK() __set_BASEPRI( 0 )
+ #define portCLEAR_INTERRUPT_MASK() __set_BASEPRI( 0 )
-extern uint32_t ulPortSetInterruptMask( void );
-extern void vPortClearInterruptMask( uint32_t ulNewMask );
-#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortSetInterruptMask()
-#define portCLEAR_INTERRUPT_MASK_FROM_ISR( x ) vPortClearInterruptMask( x )
+ extern uint32_t ulPortSetInterruptMask( void );
+ extern void vPortClearInterruptMask( uint32_t ulNewMask );
+ #define portSET_INTERRUPT_MASK_FROM_ISR() ulPortSetInterruptMask()
+ #define portCLEAR_INTERRUPT_MASK_FROM_ISR( x ) vPortClearInterruptMask( x )
-extern void vPortEnterCritical( void );
-extern void vPortExitCritical( void );
+ extern void vPortEnterCritical( void );
+ extern void vPortExitCritical( void );
-#define portDISABLE_INTERRUPTS() portSET_INTERRUPT_MASK()
-#define portENABLE_INTERRUPTS() portCLEAR_INTERRUPT_MASK()
-#define portENTER_CRITICAL() vPortEnterCritical()
-#define portEXIT_CRITICAL() vPortExitCritical()
+ #define portDISABLE_INTERRUPTS() portSET_INTERRUPT_MASK()
+ #define portENABLE_INTERRUPTS() portCLEAR_INTERRUPT_MASK()
+ #define portENTER_CRITICAL() vPortEnterCritical()
+ #define portEXIT_CRITICAL() vPortExitCritical()
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
-#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
-#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
+ #define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void * pvParameters )
+ #define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void * pvParameters )
-#define portNOP()
+ #define portNOP()
/* *INDENT-OFF* */
#ifdef __cplusplus
