diff --git a/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_CM3/port.c b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_CM3/port.c new file mode 100644 index 0000000..a159ab2 --- /dev/null +++ b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_CM3/port.c
@@ -0,0 +1,621 @@ +/* + * FreeRTOS Kernel V10.2.1 + * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/*----------------------------------------------------------- + * Implementation of functions defined in portable.h for the ARM CM4F port. + *----------------------------------------------------------*/ + +/* Scheduler includes. */ +#include "FreeRTOS.h" +#include "task.h" + +#if( configMAX_SYSCALL_INTERRUPT_PRIORITY == 0 ) + #error configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0. See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html +#endif + +#ifndef configSYSTICK_CLOCK_HZ + #define configSYSTICK_CLOCK_HZ configCPU_CLOCK_HZ + /* Ensure the SysTick is clocked at the same frequency as the core. */ + #define portNVIC_SYSTICK_CLK_BIT ( 1UL << 2UL ) +#else + /* The way the SysTick is clocked is not modified in case it is not the same + as the core. */ + #define portNVIC_SYSTICK_CLK_BIT ( 0 ) +#endif + +/* Constants required to manipulate the core. Registers first... */ +#define portNVIC_SYSTICK_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000e010 ) ) +#define portNVIC_SYSTICK_LOAD_REG ( * ( ( volatile uint32_t * ) 0xe000e014 ) ) +#define portNVIC_SYSTICK_CURRENT_VALUE_REG ( * ( ( volatile uint32_t * ) 0xe000e018 ) ) +#define portNVIC_SYSPRI2_REG ( * ( ( volatile uint32_t * ) 0xe000ed20 ) ) +/* ...then bits in the registers. */ +#define portNVIC_SYSTICK_INT_BIT ( 1UL << 1UL ) +#define portNVIC_SYSTICK_ENABLE_BIT ( 1UL << 0UL ) +#define portNVIC_SYSTICK_COUNT_FLAG_BIT ( 1UL << 16UL ) +#define portNVIC_PENDSVCLEAR_BIT ( 1UL << 27UL ) +#define portNVIC_PEND_SYSTICK_CLEAR_BIT ( 1UL << 25UL ) + +#define portNVIC_PENDSV_PRI ( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 16UL ) +#define portNVIC_SYSTICK_PRI ( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 24UL ) + +/* Constants required to check the validity of an interrupt priority. */ +#define portFIRST_USER_INTERRUPT_NUMBER ( 16 ) +#define portNVIC_IP_REGISTERS_OFFSET_16 ( 0xE000E3F0 ) +#define portAIRCR_REG ( * ( ( volatile uint32_t * ) 0xE000ED0C ) ) +#define portMAX_8_BIT_VALUE ( ( uint8_t ) 0xff ) +#define portTOP_BIT_OF_BYTE ( ( uint8_t ) 0x80 ) +#define portMAX_PRIGROUP_BITS ( ( uint8_t ) 7 ) +#define portPRIORITY_GROUP_MASK ( 0x07UL << 8UL ) +#define portPRIGROUP_SHIFT ( 8UL ) + +/* Masks off all bits but the VECTACTIVE bits in the ICSR register. */ +#define portVECTACTIVE_MASK ( 0xFFUL ) + +/* Constants required to set up the initial stack. */ +#define portINITIAL_XPSR ( 0x01000000 ) + +/* The systick is a 24-bit counter. */ +#define portMAX_24_BIT_NUMBER ( 0xffffffUL ) + +/* A fiddle factor to estimate the number of SysTick counts that would have +occurred while the SysTick counter is stopped during tickless idle +calculations. */ +#define portMISSED_COUNTS_FACTOR ( 45UL ) + +/* For strict compliance with the Cortex-M spec the task start address should +have bit-0 clear, as it is loaded into the PC on exit from an ISR. */ +#define portSTART_ADDRESS_MASK ( ( StackType_t ) 0xfffffffeUL ) + +/* + * Setup the timer to generate the tick interrupts. The implementation in this + * file is weak to allow application writers to change the timer used to + * generate the tick interrupt. + */ +void vPortSetupTimerInterrupt( void ); + +/* + * Exception handlers. + */ +void xPortSysTickHandler( void ); + +/* + * Start first task is a separate function so it can be tested in isolation. + */ +extern void vPortStartFirstTask( void ); + +/* + * Used to catch tasks that attempt to return from their implementing function. + */ +static void prvTaskExitError( void ); + +/*-----------------------------------------------------------*/ + +/* Required to allow portasm.asm access the configMAX_SYSCALL_INTERRUPT_PRIORITY +setting. */ +const uint32_t ulMaxSyscallInterruptPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY; + +/* Each task maintains its own interrupt status in the critical nesting +variable. */ +static UBaseType_t uxCriticalNesting = 0xaaaaaaaa; + +/* + * The number of SysTick increments that make up one tick period. + */ +#if( configUSE_TICKLESS_IDLE == 1 ) + static uint32_t ulTimerCountsForOneTick = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * The maximum number of tick periods that can be suppressed is limited by the + * 24 bit resolution of the SysTick timer. + */ +#if( configUSE_TICKLESS_IDLE == 1 ) + static uint32_t xMaximumPossibleSuppressedTicks = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * Compensate for the CPU cycles that pass while the SysTick is stopped (low + * power functionality only. + */ +#if( configUSE_TICKLESS_IDLE == 1 ) + static uint32_t ulStoppedTimerCompensation = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * Used by the portASSERT_IF_INTERRUPT_PRIORITY_INVALID() macro to ensure + * FreeRTOS API functions are not called from interrupts that have been assigned + * a priority above configMAX_SYSCALL_INTERRUPT_PRIORITY. + */ +#if ( configASSERT_DEFINED == 1 ) + static uint8_t ucMaxSysCallPriority = 0; + static uint32_t ulMaxPRIGROUPValue = 0; + static const volatile uint8_t * const pcInterruptPriorityRegisters = ( uint8_t * ) portNVIC_IP_REGISTERS_OFFSET_16; +#endif /* configASSERT_DEFINED */ + +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +StackType_t * pxPortInitialiseStack( StackType_t * pxTopOfStack, + TaskFunction_t pxCode, + void * pvParameters ) +{ + /* Simulate the stack frame as it would be created by a context switch + interrupt. */ + + /* Offset added to account for the way the MCU uses the stack on entry/exit + of interrupts, and to ensure alignment. */ + pxTopOfStack--; + + *pxTopOfStack = portINITIAL_XPSR; /* xPSR */ + pxTopOfStack--; + *pxTopOfStack = ( ( StackType_t ) pxCode ) & portSTART_ADDRESS_MASK; /* PC */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) prvTaskExitError; /* LR */ + + /* Save code space by skipping register initialisation. */ + pxTopOfStack -= 5; /* R12, R3, R2 and R1. */ + *pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */ + + pxTopOfStack -= 8; /* R11, R10, R9, R8, R7, R6, R5 and R4. */ + + return pxTopOfStack; +} +/*-----------------------------------------------------------*/ + +static void prvTaskExitError( void ) +{ + /* A function that implements a task must not exit or attempt to return to + its caller as there is nothing to return to. If a task wants to exit it + should instead call vTaskDelete( NULL ). + + Artificially force an assert() to be triggered if configASSERT() is + defined, then stop here so application writers can catch the error. */ + configASSERT( uxCriticalNesting == ~0UL ); + portDISABLE_INTERRUPTS(); + for( ;; ); +} +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +BaseType_t xPortStartScheduler( void ) +{ + #if( configASSERT_DEFINED == 1 ) + { + volatile uint32_t ulOriginalPriority; + volatile uint8_t * const pucFirstUserPriorityRegister = ( uint8_t * ) ( portNVIC_IP_REGISTERS_OFFSET_16 + portFIRST_USER_INTERRUPT_NUMBER ); + volatile uint8_t ucMaxPriorityValue; + + /* Determine the maximum priority from which ISR safe FreeRTOS API + functions can be called. ISR safe functions are those that end in + "FromISR". FreeRTOS maintains separate thread and ISR API functions to + ensure interrupt entry is as fast and simple as possible. + + Save the interrupt priority value that is about to be clobbered. */ + ulOriginalPriority = *pucFirstUserPriorityRegister; + + /* Determine the number of priority bits available. First write to all + possible bits. */ + *pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE; + + /* Read the value back to see how many bits stuck. */ + ucMaxPriorityValue = *pucFirstUserPriorityRegister; + + /* Use the same mask on the maximum system call priority. */ + ucMaxSysCallPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY & ucMaxPriorityValue; + + /* Calculate the maximum acceptable priority group value for the number + of bits read back. */ + ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS; + while( ( ucMaxPriorityValue & portTOP_BIT_OF_BYTE ) == portTOP_BIT_OF_BYTE ) + { + ulMaxPRIGROUPValue--; + ucMaxPriorityValue <<= ( uint8_t ) 0x01; + } + + #ifdef __NVIC_PRIO_BITS + { + /* Check the CMSIS configuration that defines the number of + priority bits matches the number of priority bits actually queried + from the hardware. */ + configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == __NVIC_PRIO_BITS ); + } + #endif + + #ifdef configPRIO_BITS + { + /* Check the FreeRTOS configuration that defines the number of + priority bits matches the number of priority bits actually queried + from the hardware. */ + configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == configPRIO_BITS ); + } + #endif + + /* Shift the priority group value back to its position within the AIRCR + register. */ + ulMaxPRIGROUPValue <<= portPRIGROUP_SHIFT; + ulMaxPRIGROUPValue &= portPRIORITY_GROUP_MASK; + + /* Restore the clobbered interrupt priority register to its original + value. */ + *pucFirstUserPriorityRegister = ulOriginalPriority; + } + #endif /* conifgASSERT_DEFINED */ + + /* Make PendSV and SysTick the lowest priority interrupts. */ + portNVIC_SYSPRI2_REG |= portNVIC_PENDSV_PRI; + portNVIC_SYSPRI2_REG |= portNVIC_SYSTICK_PRI; + + /* Start the timer that generates the tick ISR. Interrupts are disabled + here already. */ + vPortSetupTimerInterrupt(); + + /* Initialise the critical nesting count ready for the first task. */ + uxCriticalNesting = 0; + + /* Start the first task. */ + vPortStartFirstTask(); + + /* Should not get here! */ + return 0; +} +/*-----------------------------------------------------------*/ + +void vPortEndScheduler( void ) +{ + /* Not implemented in ports where there is nothing to return to. + Artificially force an assert. */ + configASSERT( uxCriticalNesting == 1000UL ); +} +/*-----------------------------------------------------------*/ + +void vPortEnterCritical( void ) +{ + portDISABLE_INTERRUPTS(); + uxCriticalNesting++; + + /* This is not the interrupt safe version of the enter critical function so + assert() if it is being called from an interrupt context. Only API + functions that end in "FromISR" can be used in an interrupt. Only assert if + the critical nesting count is 1 to protect against recursive calls if the + assert function also uses a critical section. */ + if( uxCriticalNesting == 1 ) + { + configASSERT( ( portNVIC_INT_CTRL_REG & portVECTACTIVE_MASK ) == 0 ); + } +} +/*-----------------------------------------------------------*/ + +void vPortExitCritical( void ) +{ + configASSERT( uxCriticalNesting ); + uxCriticalNesting--; + if( uxCriticalNesting == 0 ) + { + portENABLE_INTERRUPTS(); + } +} +/*-----------------------------------------------------------*/ + +void xPortSysTickHandler( void ) +{ + /* The SysTick runs at the lowest interrupt priority, so when this interrupt + executes all interrupts must be unmasked. There is therefore no need to + save and then restore the interrupt mask value as its value is already + known. */ + ( void ) portSET_INTERRUPT_MASK_FROM_ISR(); + { + /* Increment the RTOS tick. */ + if( xTaskIncrementTick() != pdFALSE ) + { + /* A context switch is required. Context switching is performed in + the PendSV interrupt. Pend the PendSV interrupt. */ + portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; + } + } + portCLEAR_INTERRUPT_MASK_FROM_ISR( 0 ); +} +/*-----------------------------------------------------------*/ + +#if( configUSE_TICKLESS_IDLE == 1 ) + + #pragma WEAK( vPortSuppressTicksAndSleep ) + void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime ) + { + uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements; + TickType_t xModifiableIdleTime; + + /* Make sure the SysTick reload value does not overflow the counter. */ + if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks ) + { + xExpectedIdleTime = xMaximumPossibleSuppressedTicks; + } + + /* Stop the SysTick momentarily. The time the SysTick is stopped for + is accounted for as best it can be, but using the tickless mode will + inevitably result in some tiny drift of the time maintained by the + kernel with respect to calendar time. */ + portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE_BIT; + + /* Calculate the reload value required to wait xExpectedIdleTime + tick periods. -1 is used because this code will execute part way + through one of the tick periods. */ + ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) ); + if( ulReloadValue > ulStoppedTimerCompensation ) + { + ulReloadValue -= ulStoppedTimerCompensation; + } + + /* Enter a critical section but don't use the taskENTER_CRITICAL() + method as that will mask interrupts that should exit sleep mode. */ + __asm( " cpsid i" ); + __asm( " dsb" ); + __asm( " isb" ); + + + /* If a context switch is pending or a task is waiting for the scheduler + to be unsuspended then abandon the low power entry. */ + if( eTaskConfirmSleepModeStatus() == eAbortSleep ) + { + /* Restart from whatever is left in the count register to complete + this tick period. */ + portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG; + + /* Restart SysTick. */ + portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT; + + /* Reset the reload register to the value required for normal tick + periods. */ + portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL; + + /* Re-enable interrupts - see comments above __disable_interrupt() + call above. */ + __asm( " cpsie i" ); + } + else + { + /* Set the new reload value. */ + portNVIC_SYSTICK_LOAD_REG = ulReloadValue; + + /* Clear the SysTick count flag and set the count value back to + zero. */ + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + + /* Restart SysTick. */ + portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT; + + /* Sleep until something happens. configPRE_SLEEP_PROCESSING() can + set its parameter to 0 to indicate that its implementation contains + its own wait for interrupt or wait for event instruction, and so wfi + should not be executed again. However, the original expected idle + time variable must remain unmodified, so a copy is taken. */ + xModifiableIdleTime = xExpectedIdleTime; + configPRE_SLEEP_PROCESSING( xModifiableIdleTime ); + if( xModifiableIdleTime > 0 ) + { + __asm( " dsb" ); + __asm( " wfi" ); + __asm( " isb" ); + } + configPOST_SLEEP_PROCESSING( xExpectedIdleTime ); + + /* Re-enable interrupts to allow the interrupt that brought the MCU + out of sleep mode to execute immediately. see comments above + __disable_interrupt() call above. */ + __asm( " cpsie i" ); + __asm( " dsb" ); + __asm( " isb" ); + + /* Disable interrupts again because the clock is about to be stopped + and interrupts that execute while the clock is stopped will increase + any slippage between the time maintained by the RTOS and calendar + time. */ + __asm( " cpsid i" ); + __asm( " dsb" ); + __asm( " isb" ); + + /* Disable the SysTick clock without reading the + portNVIC_SYSTICK_CTRL_REG register to ensure the + portNVIC_SYSTICK_COUNT_FLAG_BIT is not cleared if it is set. Again, + the time the SysTick is stopped for is accounted for as best it can + be, but using the tickless mode will inevitably result in some tiny + drift of the time maintained by the kernel with respect to calendar + time*/ + portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT ); + + /* Determine if the SysTick clock has already counted to zero and + been set back to the current reload value (the reload back being + correct for the entire expected idle time) or if the SysTick is yet + to count to zero (in which case an interrupt other than the SysTick + must have brought the system out of sleep mode). */ + if( ( portNVIC_SYSTICK_CTRL_REG & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 ) + { + uint32_t ulCalculatedLoadValue; + + /* The tick interrupt is already pending, and the SysTick count + reloaded with ulReloadValue. Reset the + portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick + period. */ + ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG ); + + /* Don't allow a tiny value, or values that have somehow + underflowed because the post sleep hook did something + that took too long. */ + if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) ) + { + ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ); + } + + portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue; + + /* As the pending tick will be processed as soon as this + function exits, the tick value maintained by the tick is stepped + forward by one less than the time spent waiting. */ + ulCompleteTickPeriods = xExpectedIdleTime - 1UL; + } + else + { + /* Something other than the tick interrupt ended the sleep. + Work out how long the sleep lasted rounded to complete tick + periods (not the ulReload value which accounted for part + ticks). */ + ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG; + + /* How many complete tick periods passed while the processor + was waiting? */ + ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick; + + /* The reload value is set to whatever fraction of a single tick + period remains. */ + portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements; + } + + /* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG + again, then set portNVIC_SYSTICK_LOAD_REG back to its standard + value. */ + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT; + vTaskStepTick( ulCompleteTickPeriods ); + portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL; + + /* Exit with interrpts enabled. */ + __asm( " cpsie i" ); + } + } + +#endif /* configUSE_TICKLESS_IDLE */ +/*-----------------------------------------------------------*/ + +/* + * Setup the systick timer to generate the tick interrupts at the required + * frequency. + */ +#pragma WEAK( vPortSetupTimerInterrupt ) +void vPortSetupTimerInterrupt( void ) +{ + /* Calculate the constants required to configure the tick interrupt. */ + #if( configUSE_TICKLESS_IDLE == 1 ) + { + ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ); + xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick; + ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ ); + } + #endif /* configUSE_TICKLESS_IDLE */ + + /* Stop and clear the SysTick. */ + portNVIC_SYSTICK_CTRL_REG = 0UL; + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + + /* Configure SysTick to interrupt at the requested rate. */ + portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL; + portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT ); +} +/*-----------------------------------------------------------*/ + +#if( configASSERT_DEFINED == 1 ) + + void vPortValidateInterruptPriority( void ) + { + extern uint32_t ulPortGetIPSR( void ); + uint32_t ulCurrentInterrupt; + uint8_t ucCurrentPriority; + + ulCurrentInterrupt = ulPortGetIPSR(); + + /* Is the interrupt number a user defined interrupt? */ + if( ulCurrentInterrupt >= portFIRST_USER_INTERRUPT_NUMBER ) + { + /* Look up the interrupt's priority. */ + ucCurrentPriority = pcInterruptPriorityRegisters[ ulCurrentInterrupt ]; + + /* The following assertion will fail if a service routine (ISR) for + an interrupt that has been assigned a priority above + configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API + function. ISR safe FreeRTOS API functions must *only* be called + from interrupts that have been assigned a priority at or below + configMAX_SYSCALL_INTERRUPT_PRIORITY. + + Numerically low interrupt priority numbers represent logically high + interrupt priorities, therefore the priority of the interrupt must + be set to a value equal to or numerically *higher* than + configMAX_SYSCALL_INTERRUPT_PRIORITY. + + Interrupts that use the FreeRTOS API must not be left at their + default priority of zero as that is the highest possible priority, + which is guaranteed to be above configMAX_SYSCALL_INTERRUPT_PRIORITY, + and therefore also guaranteed to be invalid. + + FreeRTOS maintains separate thread and ISR API functions to ensure + interrupt entry is as fast and simple as possible. + + The following links provide detailed information: + http://www.freertos.org/RTOS-Cortex-M3-M4.html + http://www.freertos.org/FAQHelp.html */ + configASSERT( ucCurrentPriority >= ucMaxSysCallPriority ); + } + + /* Priority grouping: The interrupt controller (NVIC) allows the bits + that define each interrupt's priority to be split between bits that + define the interrupt's pre-emption priority bits and bits that define + the interrupt's sub-priority. For simplicity all bits must be defined + to be pre-emption priority bits. The following assertion will fail if + this is not the case (if some bits represent a sub-priority). + + If the application only uses CMSIS libraries for interrupt + configuration then the correct setting can be achieved on all Cortex-M + devices by calling NVIC_SetPriorityGrouping( 0 ); before starting the + scheduler. Note however that some vendor specific peripheral libraries + assume a non-zero priority group setting, in which cases using a value + of zero will result in unpredictable behaviour. */ + configASSERT( ( portAIRCR_REG & portPRIORITY_GROUP_MASK ) <= ulMaxPRIGROUPValue ); + } + +#endif /* configASSERT_DEFINED */ + + + + + + + + + + + + + + + + + + + + +
diff --git a/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_CM3/portasm.asm b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_CM3/portasm.asm new file mode 100644 index 0000000..f792963 --- /dev/null +++ b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_CM3/portasm.asm
@@ -0,0 +1,144 @@ +;/* +; * FreeRTOS Kernel V10.2.1 +; * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. +; * +; * Permission is hereby granted, free of charge, to any person obtaining a copy of +; * this software and associated documentation files (the "Software"), to deal in +; * the Software without restriction, including without limitation the rights to +; * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of +; * the Software, and to permit persons to whom the Software is furnished to do so, +; * subject to the following conditions: +; * +; * The above copyright notice and this permission notice shall be included in all +; * copies or substantial portions of the Software. +; * +; * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +; * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS +; * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR +; * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER +; * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +; * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +; * +; * http://www.FreeRTOS.org +; * http://aws.amazon.com/freertos +; * +; * 1 tab == 4 spaces! +; */ + + .thumb + + .ref pxCurrentTCB + .ref vTaskSwitchContext + .ref ulMaxSyscallInterruptPriority + + .def xPortPendSVHandler + .def ulPortGetIPSR + .def vPortSVCHandler + .def vPortStartFirstTask + +NVICOffsetConst: .word 0xE000ED08 +CPACRConst: .word 0xE000ED88 +pxCurrentTCBConst: .word pxCurrentTCB +ulMaxSyscallInterruptPriorityConst: .word ulMaxSyscallInterruptPriority + +; ----------------------------------------------------------- + + .align 4 +ulPortGetIPSR: .asmfunc + mrs r0, ipsr + bx r14 + .endasmfunc + ; ----------------------------------------------------------- + + .align 4 +vPortSetInterruptMask: .asmfunc + push {r0} + ldr r0, ulMaxSyscallInterruptPriorityConst + msr basepri, r0 + pop {r0} + bx r14 + .endasmfunc +; ----------------------------------------------------------- + + .align 4 +xPortPendSVHandler: .asmfunc + mrs r0, psp + isb + + ;/* Get the location of the current TCB. */ + ldr r3, pxCurrentTCBConst + ldr r2, [r3] + + ;/* Save the core registers. */ + stmdb r0!, {r4-r11} + + ;/* Save the new top of stack into the first member of the TCB. */ + str r0, [r2] + + stmdb sp!, {r3, r14} + ldr r0, ulMaxSyscallInterruptPriorityConst + ldr r1, [r0] + msr basepri, r1 + dsb + isb + bl vTaskSwitchContext + mov r0, #0 + msr basepri, r0 + ldmia sp!, {r3, r14} + + ;/* The first item in pxCurrentTCB is the task top of stack. */ + ldr r1, [r3] + ldr r0, [r1] + + ;/* Pop the core registers. */ + ldmia r0!, {r4-r11} + + msr psp, r0 + isb + bx r14 + .endasmfunc + +; ----------------------------------------------------------- + + .align 4 +vPortSVCHandler: .asmfunc + ;/* Get the location of the current TCB. */ + ldr r3, pxCurrentTCBConst + ldr r1, [r3] + ldr r0, [r1] + ;/* Pop the core registers. */ + ldmia r0!, {r4-r11} + msr psp, r0 + isb + mov r0, #0 + msr basepri, r0 + orr r14, #0xd + bx r14 + .endasmfunc + +; ----------------------------------------------------------- + + .align 4 +vPortStartFirstTask: .asmfunc + ;/* Use the NVIC offset register to locate the stack. */ + ldr r0, NVICOffsetConst + ldr r0, [r0] + ldr r0, [r0] + ;/* Set the msp back to the start of the stack. */ + msr msp, r0 + ;/* Clear the bit that indicates the FPU is in use in case the FPU was used + ;before the scheduler was started - which would otherwise result in the + ;unnecessary leaving of space in the SVC stack for lazy saving of FPU + ;registers. */ + mov r0, #0 + msr control, r0 + ;/* Call SVC to start the first task. */ + cpsie i + cpsie f + dsb + isb + svc #0 + .endasmfunc + +; ----------------------------------------------------------- +
diff --git a/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_CM3/portmacro.h b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_CM3/portmacro.h new file mode 100644 index 0000000..a73c5eb --- /dev/null +++ b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_CM3/portmacro.h
@@ -0,0 +1,171 @@ +/* + * FreeRTOS Kernel V10.2.1 + * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef PORTMACRO_H +#define PORTMACRO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/*----------------------------------------------------------- + * Port specific definitions. + * + * The settings in this file configure FreeRTOS correctly for the + * given hardware and compiler. + * + * These settings should not be altered. + *----------------------------------------------------------- + */ + +/* Type definitions. */ +#define portCHAR char +#define portFLOAT float +#define portDOUBLE double +#define portLONG long +#define portSHORT short +#define portSTACK_TYPE uint32_t +#define portBASE_TYPE long + +typedef portSTACK_TYPE StackType_t; +typedef long BaseType_t; +typedef unsigned long UBaseType_t; + +#if( configUSE_16_BIT_TICKS == 1 ) + typedef uint16_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffff +#else + typedef uint32_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffffffffUL + + /* 32-bit tick type on a 32-bit architecture, so reads of the tick count do + not need to be guarded with a critical section. */ + #define portTICK_TYPE_IS_ATOMIC 1 +#endif +/*-----------------------------------------------------------*/ + +/* Architecture specifics. */ +#define portSTACK_GROWTH ( -1 ) +#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ ) +#define portBYTE_ALIGNMENT 8 + +/*-----------------------------------------------------------*/ + +/* Compiler directives. */ +#define portWEAK_SYMBOL __attribute__((weak)) + +/*-----------------------------------------------------------*/ + +/* Scheduler utilities. */ +#define portYIELD() \ +{ \ + /* Set a PendSV to request a context switch. */ \ + portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; \ + __asm( " dsb" ); \ + __asm( " isb" ); \ +} + +#define portNVIC_INT_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000ed04 ) ) +#define portNVIC_PENDSVSET_BIT ( 1UL << 28UL ) +#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired != pdFALSE ) portYIELD() +#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x ) + +/*-----------------------------------------------------------*/ + +/* Architecture specific optimisations. */ +#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION + #define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 +#endif + +#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1 + + /* Check the configuration. */ + #if( configMAX_PRIORITIES > 32 ) + #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice. + #endif + + /* Store/clear the ready priorities in a bit map. */ + #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) ) + #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) ) + + /*-----------------------------------------------------------*/ + + #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31 - __clz( ( uxReadyPriorities ) ) ) + +#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */ +/*-----------------------------------------------------------*/ + +/* Critical section management. */ +extern void vPortEnterCritical( void ); +extern void vPortExitCritical( void ); + +#define portDISABLE_INTERRUPTS() \ +{ \ + _set_interrupt_priority( configMAX_SYSCALL_INTERRUPT_PRIORITY ); \ + __asm( " dsb" ); \ + __asm( " isb" ); \ +} + +#define portENABLE_INTERRUPTS() _set_interrupt_priority( 0 ) +#define portENTER_CRITICAL() vPortEnterCritical() +#define portEXIT_CRITICAL() vPortExitCritical() +#define portSET_INTERRUPT_MASK_FROM_ISR() _set_interrupt_priority( configMAX_SYSCALL_INTERRUPT_PRIORITY ); __asm( " dsb" ); __asm( " isb" ) +#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) _set_interrupt_priority( x ) +/*-----------------------------------------------------------*/ + +/* Tickless idle/low power functionality. */ +#ifndef portSUPPRESS_TICKS_AND_SLEEP + extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime ); + #define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime ) +#endif + +/*-----------------------------------------------------------*/ + +/* Task function macros as described on the FreeRTOS.org WEB site. These are +not necessary for to use this port. They are defined so the common demo files +(which build with all the ports) will build. */ +#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters ) +#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters ) +/*-----------------------------------------------------------*/ + +#ifdef configASSERT + void vPortValidateInterruptPriority( void ); + #define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() vPortValidateInterruptPriority() +#endif + +/* portNOP() is not required by this port. */ +#define portNOP() + +/*-----------------------------------------------------------*/ + +#ifdef __cplusplus +} +#endif + +#endif /* PORTMACRO_H */ +
diff --git a/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_CM4F/port.c b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_CM4F/port.c new file mode 100644 index 0000000..452aafc --- /dev/null +++ b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_CM4F/port.c
@@ -0,0 +1,644 @@ +/* + * FreeRTOS Kernel V10.2.1 + * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/*----------------------------------------------------------- + * Implementation of functions defined in portable.h for the ARM CM4F port. + *----------------------------------------------------------*/ + +/* Scheduler includes. */ +#include "FreeRTOS.h" +#include "task.h" + +#ifndef __TI_VFP_SUPPORT__ + #error This port can only be used when the project options are configured to enable hardware floating point support. +#endif + +#if( configMAX_SYSCALL_INTERRUPT_PRIORITY == 0 ) + #error configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0. See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html +#endif + +#ifndef configSYSTICK_CLOCK_HZ + #define configSYSTICK_CLOCK_HZ configCPU_CLOCK_HZ + /* Ensure the SysTick is clocked at the same frequency as the core. */ + #define portNVIC_SYSTICK_CLK_BIT ( 1UL << 2UL ) +#else + /* The way the SysTick is clocked is not modified in case it is not the same + as the core. */ + #define portNVIC_SYSTICK_CLK_BIT ( 0 ) +#endif + +/* Constants required to manipulate the core. Registers first... */ +#define portNVIC_SYSTICK_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000e010 ) ) +#define portNVIC_SYSTICK_LOAD_REG ( * ( ( volatile uint32_t * ) 0xe000e014 ) ) +#define portNVIC_SYSTICK_CURRENT_VALUE_REG ( * ( ( volatile uint32_t * ) 0xe000e018 ) ) +#define portNVIC_SYSPRI2_REG ( * ( ( volatile uint32_t * ) 0xe000ed20 ) ) +/* ...then bits in the registers. */ +#define portNVIC_SYSTICK_INT_BIT ( 1UL << 1UL ) +#define portNVIC_SYSTICK_ENABLE_BIT ( 1UL << 0UL ) +#define portNVIC_SYSTICK_COUNT_FLAG_BIT ( 1UL << 16UL ) +#define portNVIC_PENDSVCLEAR_BIT ( 1UL << 27UL ) +#define portNVIC_PEND_SYSTICK_CLEAR_BIT ( 1UL << 25UL ) + +#define portNVIC_PENDSV_PRI ( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 16UL ) +#define portNVIC_SYSTICK_PRI ( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 24UL ) + +/* Constants required to check the validity of an interrupt priority. */ +#define portFIRST_USER_INTERRUPT_NUMBER ( 16 ) +#define portNVIC_IP_REGISTERS_OFFSET_16 ( 0xE000E3F0 ) +#define portAIRCR_REG ( * ( ( volatile uint32_t * ) 0xE000ED0C ) ) +#define portMAX_8_BIT_VALUE ( ( uint8_t ) 0xff ) +#define portTOP_BIT_OF_BYTE ( ( uint8_t ) 0x80 ) +#define portMAX_PRIGROUP_BITS ( ( uint8_t ) 7 ) +#define portPRIORITY_GROUP_MASK ( 0x07UL << 8UL ) +#define portPRIGROUP_SHIFT ( 8UL ) + +/* Masks off all bits but the VECTACTIVE bits in the ICSR register. */ +#define portVECTACTIVE_MASK ( 0xFFUL ) + +/* Constants required to manipulate the VFP. */ +#define portFPCCR ( ( volatile uint32_t * ) 0xe000ef34 ) /* Floating point context control register. */ +#define portASPEN_AND_LSPEN_BITS ( 0x3UL << 30UL ) + +/* Constants required to set up the initial stack. */ +#define portINITIAL_XPSR ( 0x01000000 ) +#define portINITIAL_EXC_RETURN ( 0xfffffffd ) + +/* The systick is a 24-bit counter. */ +#define portMAX_24_BIT_NUMBER ( 0xffffffUL ) + +/* A fiddle factor to estimate the number of SysTick counts that would have +occurred while the SysTick counter is stopped during tickless idle +calculations. */ +#define portMISSED_COUNTS_FACTOR ( 45UL ) + +/* For strict compliance with the Cortex-M spec the task start address should +have bit-0 clear, as it is loaded into the PC on exit from an ISR. */ +#define portSTART_ADDRESS_MASK ( ( StackType_t ) 0xfffffffeUL ) + +/* + * Setup the timer to generate the tick interrupts. The implementation in this + * file is weak to allow application writers to change the timer used to + * generate the tick interrupt. + */ +void vPortSetupTimerInterrupt( void ); + +/* + * Exception handlers. + */ +void xPortSysTickHandler( void ); + +/* + * Start first task is a separate function so it can be tested in isolation. + */ +extern void vPortStartFirstTask( void ); + +/* + * Turn the VFP on. + */ +extern void vPortEnableVFP( void ); + +/* + * Used to catch tasks that attempt to return from their implementing function. + */ +static void prvTaskExitError( void ); + +/*-----------------------------------------------------------*/ + +/* Required to allow portasm.asm access the configMAX_SYSCALL_INTERRUPT_PRIORITY +setting. */ +const uint32_t ulMaxSyscallInterruptPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY; + +/* Each task maintains its own interrupt status in the critical nesting +variable. */ +static UBaseType_t uxCriticalNesting = 0xaaaaaaaa; + +/* + * The number of SysTick increments that make up one tick period. + */ +#if( configUSE_TICKLESS_IDLE == 1 ) + static uint32_t ulTimerCountsForOneTick = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * The maximum number of tick periods that can be suppressed is limited by the + * 24 bit resolution of the SysTick timer. + */ +#if( configUSE_TICKLESS_IDLE == 1 ) + static uint32_t xMaximumPossibleSuppressedTicks = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * Compensate for the CPU cycles that pass while the SysTick is stopped (low + * power functionality only. + */ +#if( configUSE_TICKLESS_IDLE == 1 ) + static uint32_t ulStoppedTimerCompensation = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * Used by the portASSERT_IF_INTERRUPT_PRIORITY_INVALID() macro to ensure + * FreeRTOS API functions are not called from interrupts that have been assigned + * a priority above configMAX_SYSCALL_INTERRUPT_PRIORITY. + */ +#if ( configASSERT_DEFINED == 1 ) + static uint8_t ucMaxSysCallPriority = 0; + static uint32_t ulMaxPRIGROUPValue = 0; + static const volatile uint8_t * const pcInterruptPriorityRegisters = ( uint8_t * ) portNVIC_IP_REGISTERS_OFFSET_16; +#endif /* configASSERT_DEFINED */ + +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters ) +{ + /* Simulate the stack frame as it would be created by a context switch + interrupt. */ + + /* Offset added to account for the way the MCU uses the stack on entry/exit + of interrupts, and to ensure alignment. */ + pxTopOfStack--; + + *pxTopOfStack = portINITIAL_XPSR; /* xPSR */ + pxTopOfStack--; + *pxTopOfStack = ( ( StackType_t ) pxCode ) & portSTART_ADDRESS_MASK; /* PC */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) prvTaskExitError; /* LR */ + + /* Save code space by skipping register initialisation. */ + pxTopOfStack -= 5; /* R12, R3, R2 and R1. */ + *pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */ + + /* A save method is being used that requires each task to maintain its + own exec return value. */ + pxTopOfStack--; + *pxTopOfStack = portINITIAL_EXC_RETURN; + + pxTopOfStack -= 8; /* R11, R10, R9, R8, R7, R6, R5 and R4. */ + + return pxTopOfStack; +} +/*-----------------------------------------------------------*/ + +static void prvTaskExitError( void ) +{ + /* A function that implements a task must not exit or attempt to return to + its caller as there is nothing to return to. If a task wants to exit it + should instead call vTaskDelete( NULL ). + + Artificially force an assert() to be triggered if configASSERT() is + defined, then stop here so application writers can catch the error. */ + configASSERT( uxCriticalNesting == ~0UL ); + portDISABLE_INTERRUPTS(); + for( ;; ); +} +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +BaseType_t xPortStartScheduler( void ) +{ + #if( configASSERT_DEFINED == 1 ) + { + volatile uint32_t ulOriginalPriority; + volatile uint8_t * const pucFirstUserPriorityRegister = ( uint8_t * ) ( portNVIC_IP_REGISTERS_OFFSET_16 + portFIRST_USER_INTERRUPT_NUMBER ); + volatile uint8_t ucMaxPriorityValue; + + /* Determine the maximum priority from which ISR safe FreeRTOS API + functions can be called. ISR safe functions are those that end in + "FromISR". FreeRTOS maintains separate thread and ISR API functions to + ensure interrupt entry is as fast and simple as possible. + + Save the interrupt priority value that is about to be clobbered. */ + ulOriginalPriority = *pucFirstUserPriorityRegister; + + /* Determine the number of priority bits available. First write to all + possible bits. */ + *pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE; + + /* Read the value back to see how many bits stuck. */ + ucMaxPriorityValue = *pucFirstUserPriorityRegister; + + /* Use the same mask on the maximum system call priority. */ + ucMaxSysCallPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY & ucMaxPriorityValue; + + /* Calculate the maximum acceptable priority group value for the number + of bits read back. */ + ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS; + while( ( ucMaxPriorityValue & portTOP_BIT_OF_BYTE ) == portTOP_BIT_OF_BYTE ) + { + ulMaxPRIGROUPValue--; + ucMaxPriorityValue <<= ( uint8_t ) 0x01; + } + + #ifdef __NVIC_PRIO_BITS + { + /* Check the CMSIS configuration that defines the number of + priority bits matches the number of priority bits actually queried + from the hardware. */ + configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == __NVIC_PRIO_BITS ); + } + #endif + + #ifdef configPRIO_BITS + { + /* Check the FreeRTOS configuration that defines the number of + priority bits matches the number of priority bits actually queried + from the hardware. */ + configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == configPRIO_BITS ); + } + #endif + + /* Shift the priority group value back to its position within the AIRCR + register. */ + ulMaxPRIGROUPValue <<= portPRIGROUP_SHIFT; + ulMaxPRIGROUPValue &= portPRIORITY_GROUP_MASK; + + /* Restore the clobbered interrupt priority register to its original + value. */ + *pucFirstUserPriorityRegister = ulOriginalPriority; + } + #endif /* conifgASSERT_DEFINED */ + + /* Make PendSV and SysTick the lowest priority interrupts. */ + portNVIC_SYSPRI2_REG |= portNVIC_PENDSV_PRI; + portNVIC_SYSPRI2_REG |= portNVIC_SYSTICK_PRI; + + /* Start the timer that generates the tick ISR. Interrupts are disabled + here already. */ + vPortSetupTimerInterrupt(); + + /* Initialise the critical nesting count ready for the first task. */ + uxCriticalNesting = 0; + + /* Ensure the VFP is enabled - it should be anyway. */ + vPortEnableVFP(); + + /* Lazy save always. */ + *( portFPCCR ) |= portASPEN_AND_LSPEN_BITS; + + /* Start the first task. */ + vPortStartFirstTask(); + + /* Should not get here! */ + return 0; +} +/*-----------------------------------------------------------*/ + +void vPortEndScheduler( void ) +{ + /* Not implemented in ports where there is nothing to return to. + Artificially force an assert. */ + configASSERT( uxCriticalNesting == 1000UL ); +} +/*-----------------------------------------------------------*/ + +void vPortEnterCritical( void ) +{ + portDISABLE_INTERRUPTS(); + uxCriticalNesting++; + + /* This is not the interrupt safe version of the enter critical function so + assert() if it is being called from an interrupt context. Only API + functions that end in "FromISR" can be used in an interrupt. Only assert if + the critical nesting count is 1 to protect against recursive calls if the + assert function also uses a critical section. */ + if( uxCriticalNesting == 1 ) + { + configASSERT( ( portNVIC_INT_CTRL_REG & portVECTACTIVE_MASK ) == 0 ); + } +} +/*-----------------------------------------------------------*/ + +void vPortExitCritical( void ) +{ + configASSERT( uxCriticalNesting ); + uxCriticalNesting--; + if( uxCriticalNesting == 0 ) + { + portENABLE_INTERRUPTS(); + } +} +/*-----------------------------------------------------------*/ + +void xPortSysTickHandler( void ) +{ + /* The SysTick runs at the lowest interrupt priority, so when this interrupt + executes all interrupts must be unmasked. There is therefore no need to + save and then restore the interrupt mask value as its value is already + known. */ + ( void ) portSET_INTERRUPT_MASK_FROM_ISR(); + { + /* Increment the RTOS tick. */ + if( xTaskIncrementTick() != pdFALSE ) + { + /* A context switch is required. Context switching is performed in + the PendSV interrupt. Pend the PendSV interrupt. */ + portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; + } + } + portCLEAR_INTERRUPT_MASK_FROM_ISR( 0 ); +} +/*-----------------------------------------------------------*/ + +#if( configUSE_TICKLESS_IDLE == 1 ) + + #pragma WEAK( vPortSuppressTicksAndSleep ) + void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime ) + { + uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements; + TickType_t xModifiableIdleTime; + + /* Make sure the SysTick reload value does not overflow the counter. */ + if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks ) + { + xExpectedIdleTime = xMaximumPossibleSuppressedTicks; + } + + /* Stop the SysTick momentarily. The time the SysTick is stopped for + is accounted for as best it can be, but using the tickless mode will + inevitably result in some tiny drift of the time maintained by the + kernel with respect to calendar time. */ + portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE_BIT; + + /* Calculate the reload value required to wait xExpectedIdleTime + tick periods. -1 is used because this code will execute part way + through one of the tick periods. */ + ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) ); + if( ulReloadValue > ulStoppedTimerCompensation ) + { + ulReloadValue -= ulStoppedTimerCompensation; + } + + /* Enter a critical section but don't use the taskENTER_CRITICAL() + method as that will mask interrupts that should exit sleep mode. */ + __asm( " cpsid i" ); + __asm( " dsb" ); + __asm( " isb" ); + + + /* If a context switch is pending or a task is waiting for the scheduler + to be unsuspended then abandon the low power entry. */ + if( eTaskConfirmSleepModeStatus() == eAbortSleep ) + { + /* Restart from whatever is left in the count register to complete + this tick period. */ + portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG; + + /* Restart SysTick. */ + portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT; + + /* Reset the reload register to the value required for normal tick + periods. */ + portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL; + + /* Re-enable interrupts - see comments above __disable_interrupt() + call above. */ + __asm( " cpsie i" ); + } + else + { + /* Set the new reload value. */ + portNVIC_SYSTICK_LOAD_REG = ulReloadValue; + + /* Clear the SysTick count flag and set the count value back to + zero. */ + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + + /* Restart SysTick. */ + portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT; + + /* Sleep until something happens. configPRE_SLEEP_PROCESSING() can + set its parameter to 0 to indicate that its implementation contains + its own wait for interrupt or wait for event instruction, and so wfi + should not be executed again. However, the original expected idle + time variable must remain unmodified, so a copy is taken. */ + xModifiableIdleTime = xExpectedIdleTime; + configPRE_SLEEP_PROCESSING( xModifiableIdleTime ); + if( xModifiableIdleTime > 0 ) + { + __asm( " dsb" ); + __asm( " wfi" ); + __asm( " isb" ); + } + configPOST_SLEEP_PROCESSING( xExpectedIdleTime ); + + /* Re-enable interrupts to allow the interrupt that brought the MCU + out of sleep mode to execute immediately. see comments above + __disable_interrupt() call above. */ + __asm( " cpsie i" ); + __asm( " dsb" ); + __asm( " isb" ); + + /* Disable interrupts again because the clock is about to be stopped + and interrupts that execute while the clock is stopped will increase + any slippage between the time maintained by the RTOS and calendar + time. */ + __asm( " cpsid i" ); + __asm( " dsb" ); + __asm( " isb" ); + + /* Disable the SysTick clock without reading the + portNVIC_SYSTICK_CTRL_REG register to ensure the + portNVIC_SYSTICK_COUNT_FLAG_BIT is not cleared if it is set. Again, + the time the SysTick is stopped for is accounted for as best it can + be, but using the tickless mode will inevitably result in some tiny + drift of the time maintained by the kernel with respect to calendar + time*/ + portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT ); + + /* Determine if the SysTick clock has already counted to zero and + been set back to the current reload value (the reload back being + correct for the entire expected idle time) or if the SysTick is yet + to count to zero (in which case an interrupt other than the SysTick + must have brought the system out of sleep mode). */ + if( ( portNVIC_SYSTICK_CTRL_REG & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 ) + { + uint32_t ulCalculatedLoadValue; + + /* The tick interrupt is already pending, and the SysTick count + reloaded with ulReloadValue. Reset the + portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick + period. */ + ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG ); + + /* Don't allow a tiny value, or values that have somehow + underflowed because the post sleep hook did something + that took too long. */ + if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) ) + { + ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ); + } + + portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue; + + /* As the pending tick will be processed as soon as this + function exits, the tick value maintained by the tick is stepped + forward by one less than the time spent waiting. */ + ulCompleteTickPeriods = xExpectedIdleTime - 1UL; + } + else + { + /* Something other than the tick interrupt ended the sleep. + Work out how long the sleep lasted rounded to complete tick + periods (not the ulReload value which accounted for part + ticks). */ + ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG; + + /* How many complete tick periods passed while the processor + was waiting? */ + ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick; + + /* The reload value is set to whatever fraction of a single tick + period remains. */ + portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements; + } + + /* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG + again, then set portNVIC_SYSTICK_LOAD_REG back to its standard + value. */ + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT; + vTaskStepTick( ulCompleteTickPeriods ); + portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL; + + /* Exit with interrpts enabled. */ + __asm( " cpsie i" ); + } + } + +#endif /* configUSE_TICKLESS_IDLE */ +/*-----------------------------------------------------------*/ + +/* + * Setup the systick timer to generate the tick interrupts at the required + * frequency. + */ +#pragma WEAK( vPortSetupTimerInterrupt ) +void vPortSetupTimerInterrupt( void ) +{ + /* Calculate the constants required to configure the tick interrupt. */ + #if( configUSE_TICKLESS_IDLE == 1 ) + { + ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ); + xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick; + ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ ); + } + #endif /* configUSE_TICKLESS_IDLE */ + + /* Stop and clear the SysTick. */ + portNVIC_SYSTICK_CTRL_REG = 0UL; + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + + /* Configure SysTick to interrupt at the requested rate. */ + portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL; + portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT ); +} +/*-----------------------------------------------------------*/ + +#if( configASSERT_DEFINED == 1 ) + + void vPortValidateInterruptPriority( void ) + { + extern uint32_t ulPortGetIPSR( void ); + uint32_t ulCurrentInterrupt; + uint8_t ucCurrentPriority; + + ulCurrentInterrupt = ulPortGetIPSR(); + + /* Is the interrupt number a user defined interrupt? */ + if( ulCurrentInterrupt >= portFIRST_USER_INTERRUPT_NUMBER ) + { + /* Look up the interrupt's priority. */ + ucCurrentPriority = pcInterruptPriorityRegisters[ ulCurrentInterrupt ]; + + /* The following assertion will fail if a service routine (ISR) for + an interrupt that has been assigned a priority above + configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API + function. ISR safe FreeRTOS API functions must *only* be called + from interrupts that have been assigned a priority at or below + configMAX_SYSCALL_INTERRUPT_PRIORITY. + + Numerically low interrupt priority numbers represent logically high + interrupt priorities, therefore the priority of the interrupt must + be set to a value equal to or numerically *higher* than + configMAX_SYSCALL_INTERRUPT_PRIORITY. + + Interrupts that use the FreeRTOS API must not be left at their + default priority of zero as that is the highest possible priority, + which is guaranteed to be above configMAX_SYSCALL_INTERRUPT_PRIORITY, + and therefore also guaranteed to be invalid. + + FreeRTOS maintains separate thread and ISR API functions to ensure + interrupt entry is as fast and simple as possible. + + The following links provide detailed information: + http://www.freertos.org/RTOS-Cortex-M3-M4.html + http://www.freertos.org/FAQHelp.html */ + configASSERT( ucCurrentPriority >= ucMaxSysCallPriority ); + } + + /* Priority grouping: The interrupt controller (NVIC) allows the bits + that define each interrupt's priority to be split between bits that + define the interrupt's pre-emption priority bits and bits that define + the interrupt's sub-priority. For simplicity all bits must be defined + to be pre-emption priority bits. The following assertion will fail if + this is not the case (if some bits represent a sub-priority). + + If the application only uses CMSIS libraries for interrupt + configuration then the correct setting can be achieved on all Cortex-M + devices by calling NVIC_SetPriorityGrouping( 0 ); before starting the + scheduler. Note however that some vendor specific peripheral libraries + assume a non-zero priority group setting, in which cases using a value + of zero will result in unpredictable behaviour. */ + configASSERT( ( portAIRCR_REG & portPRIORITY_GROUP_MASK ) <= ulMaxPRIGROUPValue ); + } + +#endif /* configASSERT_DEFINED */ + + + + + + + + + + + + + + + + + + + + +
diff --git a/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_CM4F/portasm.asm b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_CM4F/portasm.asm new file mode 100644 index 0000000..347fe84 --- /dev/null +++ b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_CM4F/portasm.asm
@@ -0,0 +1,171 @@ +;/* +; * FreeRTOS Kernel V10.2.1 +; * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. +; * +; * Permission is hereby granted, free of charge, to any person obtaining a copy of +; * this software and associated documentation files (the "Software"), to deal in +; * the Software without restriction, including without limitation the rights to +; * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of +; * the Software, and to permit persons to whom the Software is furnished to do so, +; * subject to the following conditions: +; * +; * The above copyright notice and this permission notice shall be included in all +; * copies or substantial portions of the Software. +; * +; * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +; * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS +; * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR +; * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER +; * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +; * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +; * +; * http://www.FreeRTOS.org +; * http://aws.amazon.com/freertos +; * +; * 1 tab == 4 spaces! +; */ + + .thumb + + .ref pxCurrentTCB + .ref vTaskSwitchContext + .ref ulMaxSyscallInterruptPriority + + .def xPortPendSVHandler + .def ulPortGetIPSR + .def vPortSVCHandler + .def vPortStartFirstTask + .def vPortEnableVFP + +NVICOffsetConst: .word 0xE000ED08 +CPACRConst: .word 0xE000ED88 +pxCurrentTCBConst: .word pxCurrentTCB +ulMaxSyscallInterruptPriorityConst: .word ulMaxSyscallInterruptPriority + +; ----------------------------------------------------------- + + .align 4 +ulPortGetIPSR: .asmfunc + mrs r0, ipsr + bx r14 + .endasmfunc + ; ----------------------------------------------------------- + + .align 4 +vPortSetInterruptMask: .asmfunc + push {r0} + ldr r0, ulMaxSyscallInterruptPriorityConst + msr basepri, r0 + pop {r0} + bx r14 + .endasmfunc +; ----------------------------------------------------------- + + .align 4 +xPortPendSVHandler: .asmfunc + mrs r0, psp + isb + + ;/* Get the location of the current TCB. */ + ldr r3, pxCurrentTCBConst + ldr r2, [r3] + + ;/* Is the task using the FPU context? If so, push high vfp registers. */ + tst r14, #0x10 + it eq + vstmdbeq r0!, {s16-s31} + + ;/* Save the core registers. */ + stmdb r0!, {r4-r11, r14} + + ;/* Save the new top of stack into the first member of the TCB. */ + str r0, [r2] + + stmdb sp!, {r0, r3} + ldr r0, ulMaxSyscallInterruptPriorityConst + ldr r1, [r0] + msr basepri, r1 + dsb + isb + bl vTaskSwitchContext + mov r0, #0 + msr basepri, r0 + ldmia sp!, {r0, r3} + + ;/* The first item in pxCurrentTCB is the task top of stack. */ + ldr r1, [r3] + ldr r0, [r1] + + ;/* Pop the core registers. */ + ldmia r0!, {r4-r11, r14} + + ;/* Is the task using the FPU context? If so, pop the high vfp registers + ;too. */ + tst r14, #0x10 + it eq + vldmiaeq r0!, {s16-s31} + + msr psp, r0 + isb + bx r14 + .endasmfunc + +; ----------------------------------------------------------- + + .align 4 +vPortSVCHandler: .asmfunc + ;/* Get the location of the current TCB. */ + ldr r3, pxCurrentTCBConst + ldr r1, [r3] + ldr r0, [r1] + ;/* Pop the core registers. */ + ldmia r0!, {r4-r11, r14} + msr psp, r0 + isb + mov r0, #0 + msr basepri, r0 + bx r14 + .endasmfunc + +; ----------------------------------------------------------- + + .align 4 +vPortStartFirstTask: .asmfunc + ;/* Use the NVIC offset register to locate the stack. */ + ldr r0, NVICOffsetConst + ldr r0, [r0] + ldr r0, [r0] + ;/* Set the msp back to the start of the stack. */ + msr msp, r0 + ;/* Clear the bit that indicates the FPU is in use in case the FPU was used + ;before the scheduler was started - which would otherwise result in the + ;unnecessary leaving of space in the SVC stack for lazy saving of FPU + ;registers. */ + mov r0, #0 + msr control, r0 + ;/* Call SVC to start the first task. */ + cpsie i + cpsie f + dsb + isb + svc #0 + .endasmfunc + +; ----------------------------------------------------------- + + .align 4 +vPortEnableVFP: .asmfunc + ;/* The FPU enable bits are in the CPACR. */ + ldr.w r0, CPACRConst + ldr r1, [r0] + + ;/* Enable CP10 and CP11 coprocessors, then save back. */ + orr r1, r1, #( 0xf << 20 ) + str r1, [r0] + bx r14 + .endasmfunc + + .end + +; ----------------------------------------------------------- +
diff --git a/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_CM4F/portmacro.h b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_CM4F/portmacro.h new file mode 100644 index 0000000..a94ec7d --- /dev/null +++ b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_CM4F/portmacro.h
@@ -0,0 +1,165 @@ +/* + * FreeRTOS Kernel V10.2.1 + * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef PORTMACRO_H +#define PORTMACRO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/*----------------------------------------------------------- + * Port specific definitions. + * + * The settings in this file configure FreeRTOS correctly for the + * given hardware and compiler. + * + * These settings should not be altered. + *----------------------------------------------------------- + */ + +/* Type definitions. */ +#define portCHAR char +#define portFLOAT float +#define portDOUBLE double +#define portLONG long +#define portSHORT short +#define portSTACK_TYPE uint32_t +#define portBASE_TYPE long + +typedef portSTACK_TYPE StackType_t; +typedef long BaseType_t; +typedef unsigned long UBaseType_t; + +#if( configUSE_16_BIT_TICKS == 1 ) + typedef uint16_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffff +#else + typedef uint32_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffffffffUL + + /* 32-bit tick type on a 32-bit architecture, so reads of the tick count do + not need to be guarded with a critical section. */ + #define portTICK_TYPE_IS_ATOMIC 1 +#endif +/*-----------------------------------------------------------*/ + +/* Architecture specifics. */ +#define portSTACK_GROWTH ( -1 ) +#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ ) +#define portBYTE_ALIGNMENT 8 +/*-----------------------------------------------------------*/ + +/* Scheduler utilities. */ +#define portYIELD() \ +{ \ + /* Set a PendSV to request a context switch. */ \ + portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; \ + __asm( " dsb" ); \ + __asm( " isb" ); \ +} + +#define portNVIC_INT_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000ed04 ) ) +#define portNVIC_PENDSVSET_BIT ( 1UL << 28UL ) +#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired != pdFALSE ) portYIELD() +#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x ) + +/*-----------------------------------------------------------*/ + +/* Architecture specific optimisations. */ +#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION + #define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 +#endif + +#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1 + + /* Check the configuration. */ + #if( configMAX_PRIORITIES > 32 ) + #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice. + #endif + + /* Store/clear the ready priorities in a bit map. */ + #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) ) + #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) ) + + /*-----------------------------------------------------------*/ + + #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31 - __clz( ( uxReadyPriorities ) ) ) + +#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */ +/*-----------------------------------------------------------*/ + +/* Critical section management. */ +extern void vPortEnterCritical( void ); +extern void vPortExitCritical( void ); + +#define portDISABLE_INTERRUPTS() \ +{ \ + _set_interrupt_priority( configMAX_SYSCALL_INTERRUPT_PRIORITY ); \ + __asm( " dsb" ); \ + __asm( " isb" ); \ +} + +#define portENABLE_INTERRUPTS() _set_interrupt_priority( 0 ) +#define portENTER_CRITICAL() vPortEnterCritical() +#define portEXIT_CRITICAL() vPortExitCritical() +#define portSET_INTERRUPT_MASK_FROM_ISR() _set_interrupt_priority( configMAX_SYSCALL_INTERRUPT_PRIORITY ); __asm( " dsb" ); __asm( " isb" ) +#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) _set_interrupt_priority( x ) +/*-----------------------------------------------------------*/ + +/* Tickless idle/low power functionality. */ +#ifndef portSUPPRESS_TICKS_AND_SLEEP + extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime ); + #define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime ) +#endif + +/*-----------------------------------------------------------*/ + +/* Task function macros as described on the FreeRTOS.org WEB site. These are +not necessary for to use this port. They are defined so the common demo files +(which build with all the ports) will build. */ +#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters ) +#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters ) +/*-----------------------------------------------------------*/ + +#ifdef configASSERT + void vPortValidateInterruptPriority( void ); + #define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() vPortValidateInterruptPriority() +#endif + +/* portNOP() is not required by this port. */ +#define portNOP() + +/*-----------------------------------------------------------*/ + +#ifdef __cplusplus +} +#endif + +#endif /* PORTMACRO_H */ +
diff --git a/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_Cortex-R4/port.c b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_Cortex-R4/port.c new file mode 100644 index 0000000..31904d4 --- /dev/null +++ b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_Cortex-R4/port.c
@@ -0,0 +1,312 @@ +/* + * FreeRTOS Kernel V10.2.1 + * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/* FreeRTOS includes. */ +#include "FreeRTOS.h" +#include "task.h" + +/*-----------------------------------------------------------*/ + +/* Count of the critical section nesting depth. */ +uint32_t ulCriticalNesting = 9999; + +/*-----------------------------------------------------------*/ + +/* Registers required to configure the RTI. */ +#define portRTI_GCTRL_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC00 ) ) +#define portRTI_TBCTRL_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC04 ) ) +#define portRTI_COMPCTRL_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC0C ) ) +#define portRTI_CNT0_FRC0_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC10 ) ) +#define portRTI_CNT0_UC0_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC14 ) ) +#define portRTI_CNT0_CPUC0_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC18 ) ) +#define portRTI_CNT0_COMP0_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC50 ) ) +#define portRTI_CNT0_UDCP0_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC54 ) ) +#define portRTI_SETINTENA_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC80 ) ) +#define portRTI_CLEARINTENA_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC84 ) ) +#define portRTI_INTFLAG_REG ( * ( ( volatile uint32_t * ) 0xFFFFFC88 ) ) + + +/* Constants required to set up the initial stack of each task. */ +#define portINITIAL_SPSR ( ( StackType_t ) 0x1F ) +#define portINITIAL_FPSCR ( ( StackType_t ) 0x00 ) +#define portINSTRUCTION_SIZE ( ( StackType_t ) 0x04 ) +#define portTHUMB_MODE_BIT ( ( StackType_t ) 0x20 ) + +/* The number of words on the stack frame between the saved Top Of Stack and +R0 (in which the parameters are passed. */ +#define portSPACE_BETWEEN_TOS_AND_PARAMETERS ( 12 ) + +/*-----------------------------------------------------------*/ + +/* vPortStartFirstSTask() is defined in portASM.asm */ +extern void vPortStartFirstTask( void ); + +/*-----------------------------------------------------------*/ + +/* Saved as part of the task context. Set to pdFALSE if the task does not +require an FPU context. */ +uint32_t ulTaskHasFPUContext = 0; + +/*-----------------------------------------------------------*/ + + +/* + * See header file for description. + */ +StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters ) +{ +StackType_t *pxOriginalTOS; + + pxOriginalTOS = pxTopOfStack; + + #if __TI_VFP_SUPPORT__ + { + /* Ensure the stack is correctly aligned on exit. */ + pxTopOfStack--; + } + #endif + + /* Setup the initial stack of the task. The stack is set exactly as + expected by the portRESTORE_CONTEXT() macro. */ + + /* First on the stack is the return address - which is the start of the as + the task has not executed yet. The offset is added to make the return + address appear as it would within an IRQ ISR. */ + *pxTopOfStack = ( StackType_t ) pxCode + portINSTRUCTION_SIZE; + pxTopOfStack--; + + *pxTopOfStack = ( StackType_t ) 0x00000000; /* R14 */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) pxOriginalTOS; /* Stack used when task starts goes in R13. */ + pxTopOfStack--; + + #ifdef portPRELOAD_TASK_REGISTERS + { + *pxTopOfStack = ( StackType_t ) 0x12121212; /* R12 */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x11111111; /* R11 */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x10101010; /* R10 */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x09090909; /* R9 */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x08080808; /* R8 */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x07070707; /* R7 */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x06060606; /* R6 */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x05050505; /* R5 */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x04040404; /* R4 */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x03030303; /* R3 */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x02020202; /* R2 */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x01010101; /* R1 */ + pxTopOfStack--; + } + #else + { + pxTopOfStack -= portSPACE_BETWEEN_TOS_AND_PARAMETERS; + } + #endif + + /* Function parameters are passed in R0. */ + *pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */ + pxTopOfStack--; + + /* Set the status register for system mode, with interrupts enabled. */ + *pxTopOfStack = ( StackType_t ) ( ( _get_CPSR() & ~0xFF ) | portINITIAL_SPSR ); + + if( ( ( uint32_t ) pxCode & 0x01UL ) != 0x00 ) + { + /* The task will start in thumb mode. */ + *pxTopOfStack |= portTHUMB_MODE_BIT; + } + + #ifdef __TI_VFP_SUPPORT__ + { + pxTopOfStack--; + + /* The last thing on the stack is the tasks ulUsingFPU value, which by + default is set to indicate that the stack frame does not include FPU + registers. */ + *pxTopOfStack = pdFALSE; + } + #endif + + return pxTopOfStack; +} +/*-----------------------------------------------------------*/ + +static void prvSetupTimerInterrupt(void) +{ + /* Disable timer 0. */ + portRTI_GCTRL_REG &= 0xFFFFFFFEUL; + + /* Use the internal counter. */ + portRTI_TBCTRL_REG = 0x00000000U; + + /* COMPSEL0 will use the RTIFRC0 counter. */ + portRTI_COMPCTRL_REG = 0x00000000U; + + /* Initialise the counter and the prescale counter registers. */ + portRTI_CNT0_UC0_REG = 0x00000000U; + portRTI_CNT0_FRC0_REG = 0x00000000U; + + /* Set Prescalar for RTI clock. */ + portRTI_CNT0_CPUC0_REG = 0x00000001U; + portRTI_CNT0_COMP0_REG = ( configCPU_CLOCK_HZ / 2 ) / configTICK_RATE_HZ; + portRTI_CNT0_UDCP0_REG = ( configCPU_CLOCK_HZ / 2 ) / configTICK_RATE_HZ; + + /* Clear interrupts. */ + portRTI_INTFLAG_REG = 0x0007000FU; + portRTI_CLEARINTENA_REG = 0x00070F0FU; + + /* Enable the compare 0 interrupt. */ + portRTI_SETINTENA_REG = 0x00000001U; + portRTI_GCTRL_REG |= 0x00000001U; +} +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +BaseType_t xPortStartScheduler(void) +{ + /* Start the timer that generates the tick ISR. */ + prvSetupTimerInterrupt(); + + /* Reset the critical section nesting count read to execute the first task. */ + ulCriticalNesting = 0; + + /* Start the first task. This is done from portASM.asm as ARM mode must be + used. */ + vPortStartFirstTask(); + + /* Should not get here! */ + return pdFAIL; +} +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +void vPortEndScheduler(void) +{ + /* Not implemented in ports where there is nothing to return to. + Artificially force an assert. */ + configASSERT( ulCriticalNesting == 1000UL ); +} +/*-----------------------------------------------------------*/ + +#if configUSE_PREEMPTION == 0 + + /* The cooperative scheduler requires a normal IRQ service routine to + * simply increment the system tick. */ + __interrupt void vPortNonPreemptiveTick( void ) + { + /* clear clock interrupt flag */ + portRTI_INTFLAG_REG = 0x00000001; + + /* Increment the tick count - this may make a delaying task ready + to run - but a context switch is not performed. */ + xTaskIncrementTick(); + } + + #else + + /* + ************************************************************************** + * The preemptive scheduler ISR is written in assembler and can be found + * in the portASM.asm file. This will only get used if portUSE_PREEMPTION + * is set to 1 in portmacro.h + ************************************************************************** + */ + void vPortPreemptiveTick( void ); + +#endif +/*-----------------------------------------------------------*/ + + +/* + * Disable interrupts, and keep a count of the nesting depth. + */ +void vPortEnterCritical( void ) +{ + /* Disable interrupts as per portDISABLE_INTERRUPTS(); */ + portDISABLE_INTERRUPTS(); + + /* Now interrupts are disabled ulCriticalNesting can be accessed + directly. Increment ulCriticalNesting to keep a count of how many times + portENTER_CRITICAL() has been called. */ + ulCriticalNesting++; +} +/*-----------------------------------------------------------*/ + +/* + * Decrement the critical nesting count, and if it has reached zero, re-enable + * interrupts. + */ +void vPortExitCritical( void ) +{ + if( ulCriticalNesting > 0 ) + { + /* Decrement the nesting count as we are leaving a critical section. */ + ulCriticalNesting--; + + /* If the nesting level has reached zero then interrupts should be + re-enabled. */ + if( ulCriticalNesting == 0 ) + { + /* Enable interrupts as per portENABLE_INTERRUPTS(). */ + portENABLE_INTERRUPTS(); + } + } +} +/*-----------------------------------------------------------*/ + +#if __TI_VFP_SUPPORT__ + + void vPortTaskUsesFPU( void ) + { + extern void vPortInitialiseFPSCR( void ); + + /* A task is registering the fact that it needs an FPU context. Set the + FPU flag (saved as part of the task context. */ + ulTaskHasFPUContext = pdTRUE; + + /* Initialise the floating point status register. */ + vPortInitialiseFPSCR(); + } + +#endif /* __TI_VFP_SUPPORT__ */ + +/*-----------------------------------------------------------*/ +
diff --git a/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_Cortex-R4/portASM.asm b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_Cortex-R4/portASM.asm new file mode 100644 index 0000000..fa13b18 --- /dev/null +++ b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_Cortex-R4/portASM.asm
@@ -0,0 +1,229 @@ +;/* +; * FreeRTOS Kernel V10.2.1 +; * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. +; * +; * Permission is hereby granted, free of charge, to any person obtaining a copy of +; * this software and associated documentation files (the "Software"), to deal in +; * the Software without restriction, including without limitation the rights to +; * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of +; * the Software, and to permit persons to whom the Software is furnished to do so, +; * subject to the following conditions: +; * +; * The above copyright notice and this permission notice shall be included in all +; * copies or substantial portions of the Software. +; * +; * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +; * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS +; * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR +; * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER +; * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +; * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +; * +; * http://www.FreeRTOS.org +; * http://aws.amazon.com/freertos +; * +; * 1 tab == 4 spaces! +; */ + + .text + .arm + .ref vTaskSwitchContext + .ref xTaskIncrementTick + .ref ulTaskHasFPUContext + .ref pxCurrentTCB + +;/*-----------------------------------------------------------*/ +; +; Save Task Context +; +portSAVE_CONTEXT .macro + DSB + + ; Push R0 as we are going to use it + STMDB SP!, {R0} + + ; Set R0 to point to the task stack pointer. + STMDB SP,{SP}^ + SUB SP, SP, #4 + LDMIA SP!,{R0} + + ; Push the return address onto the stack. + STMDB R0!, {LR} + + ; Now LR has been saved, it can be used instead of R0. + MOV LR, R0 + + ; Pop R0 so it can be saved onto the task stack. + LDMIA SP!, {R0} + + ; Push all the system mode registers onto the task stack. + STMDB LR,{R0-LR}^ + SUB LR, LR, #60 + + ; Push the SPSR onto the task stack. + MRS R0, SPSR + STMDB LR!, {R0} + + .if (__TI_VFP_SUPPORT__) + ;Determine if the task maintains an FPU context. + LDR R0, ulFPUContextConst + LDR R0, [R0] + + ; Test the flag + CMP R0, #0 + + ; If the task is not using a floating point context then skip the + ; saving of the FPU registers. + BEQ $+16 + FSTMDBD LR!, {D0-D15} + FMRX R1, FPSCR + STMFD LR!, {R1} + + ; Save the flag + STMDB LR!, {R0} + .endif + + ; Store the new top of stack for the task. + LDR R0, pxCurrentTCBConst + LDR R0, [R0] + STR LR, [R0] + + .endm + +;/*-----------------------------------------------------------*/ +; +; Restore Task Context +; +portRESTORE_CONTEXT .macro + LDR R0, pxCurrentTCBConst + LDR R0, [R0] + LDR LR, [R0] + + .if (__TI_VFP_SUPPORT__) + ; The floating point context flag is the first thing on the stack. + LDR R0, ulFPUContextConst + LDMFD LR!, {R1} + STR R1, [R0] + + ; Test the flag + CMP R1, #0 + + ; If the task is not using a floating point context then skip the + ; VFP register loads. + BEQ $+16 + + ; Restore the floating point context. + LDMFD LR!, {R0} + FLDMIAD LR!, {D0-D15} + FMXR FPSCR, R0 + .endif + + ; Get the SPSR from the stack. + LDMFD LR!, {R0} + MSR SPSR_CSXF, R0 + + ; Restore all system mode registers for the task. + LDMFD LR, {R0-R14}^ + + ; Restore the return address. + LDR LR, [LR, #+60] + + ; And return - correcting the offset in the LR to obtain the + ; correct address. + SUBS PC, LR, #4 + .endm + +;/*-----------------------------------------------------------*/ +; Start the first task by restoring its context. + + .def vPortStartFirstTask + +vPortStartFirstTask: + portRESTORE_CONTEXT + +;/*-----------------------------------------------------------*/ +; Yield to another task. + + .def vPortYieldProcessor + +vPortYieldProcessor: + ; Within an IRQ ISR the link register has an offset from the true return + ; address. SWI doesn't do this. Add the offset manually so the ISR + ; return code can be used. + ADD LR, LR, #4 + + ; First save the context of the current task. + portSAVE_CONTEXT + + ; Select the next task to execute. */ + BL vTaskSwitchContext + + ; Restore the context of the task selected to execute. + portRESTORE_CONTEXT + +;/*-----------------------------------------------------------*/ +; Yield to another task from within the FreeRTOS API + + .def vPortYeildWithinAPI + +vPortYeildWithinAPI: + ; Save the context of the current task. + + portSAVE_CONTEXT + ; Clear SSI flag. + MOVW R0, #0xFFF4 + MOVT R0, #0xFFFF + LDR R0, [R0] + + ; Select the next task to execute. */ + BL vTaskSwitchContext + + ; Restore the context of the task selected to execute. + portRESTORE_CONTEXT + +;/*-----------------------------------------------------------*/ +; Preemptive Tick + + .def vPortPreemptiveTick + +vPortPreemptiveTick: + + ; Save the context of the current task. + portSAVE_CONTEXT + + ; Clear interrupt flag + MOVW R0, #0xFC88 + MOVT R0, #0xFFFF + MOV R1, #1 + STR R1, [R0] + + ; Increment the tick count, making any adjustments to the blocked lists + ; that may be necessary. + BL xTaskIncrementTick + + ; Select the next task to execute. + CMP R0, #0 + BLNE vTaskSwitchContext + + ; Restore the context of the task selected to execute. + portRESTORE_CONTEXT + +;------------------------------------------------------------------------------- + + .if (__TI_VFP_SUPPORT__) + + .def vPortInitialiseFPSCR + +vPortInitialiseFPSCR: + + MOV R0, #0 + FMXR FPSCR, R0 + BX LR + + .endif ;__TI_VFP_SUPPORT__ + + +pxCurrentTCBConst .word pxCurrentTCB +ulFPUContextConst .word ulTaskHasFPUContext +;------------------------------------------------------------------------------- +
diff --git a/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_Cortex-R4/portmacro.h b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_Cortex-R4/portmacro.h new file mode 100644 index 0000000..1257b7d --- /dev/null +++ b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/ARM_Cortex-R4/portmacro.h
@@ -0,0 +1,117 @@ +/* + * FreeRTOS Kernel V10.2.1 + * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +#ifndef __PORTMACRO_H__ +#define __PORTMACRO_H__ + +/*----------------------------------------------------------- + * Port specific definitions. + * + * The settings in this file configure FreeRTOS correctly for the + * given hardware and compiler. + * + * These settings should not be altered. + *----------------------------------------------------------- + */ + +/* Type definitions. */ +#define portCHAR char +#define portFLOAT float +#define portDOUBLE double +#define portLONG long +#define portSHORT short +#define portSTACK_TYPE uint32_t +#define portBASE_TYPE long + +typedef portSTACK_TYPE StackType_t; +typedef long BaseType_t; +typedef unsigned long UBaseType_t; + +#if (configUSE_16_BIT_TICKS == 1) + typedef uint16_t TickType_t; + #define portMAX_DELAY (TickType_t) 0xFFFF +#else + typedef uint32_t TickType_t; + #define portMAX_DELAY (TickType_t) 0xFFFFFFFFF + + /* 32-bit tick type on a 32-bit architecture, so reads of the tick count do + not need to be guarded with a critical section. */ + #define portTICK_TYPE_IS_ATOMIC 1 +#endif + + +/* Architecture specifics. */ +#define portSTACK_GROWTH (-1) +#define portTICK_PERIOD_MS ((TickType_t) 1000 / configTICK_RATE_HZ) +#define portBYTE_ALIGNMENT 8 + +/* Critical section handling. */ +extern void vPortEnterCritical(void); +extern void vPortExitCritical(void); +#define portENTER_CRITICAL() vPortEnterCritical() +#define portEXIT_CRITICAL() vPortExitCritical() +#define portDISABLE_INTERRUPTS() asm( " CPSID I" ) +#define portENABLE_INTERRUPTS() asm( " CPSIE I" ) + +/* Scheduler utilities. */ +#pragma SWI_ALIAS( vPortYield, 0 ) +extern void vPortYield( void ); +#define portYIELD() vPortYield() +#define portSYS_SSIR1_REG ( * ( ( volatile uint32_t * ) 0xFFFFFFB0 ) ) +#define portSYS_SSIR1_SSKEY ( 0x7500UL ) +#define portYIELD_WITHIN_API() { portSYS_SSIR1_REG = portSYS_SSIR1_SSKEY; asm( " DSB " ); asm( " ISB " ); } +#define portYIELD_FROM_ISR( x ) if( x != pdFALSE ){ portSYS_SSIR1_REG = portSYS_SSIR1_SSKEY; ( void ) portSYS_SSIR1_REG; } + +#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION + #define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 +#endif + +/* Architecture specific optimisations. */ +#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1 + + /* Check the configuration. */ + #if( configMAX_PRIORITIES > 32 ) + #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice. + #endif + + /* Store/clear the ready priorities in a bit map. */ + #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) ) + #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) ) + + /*-----------------------------------------------------------*/ + + #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31 - __clz( ( uxReadyPriorities ) ) ) + +#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */ + + +/* Task function macros as described on the FreeRTOS.org WEB site. */ +#define portTASK_FUNCTION(vFunction, pvParameters) void vFunction(void *pvParameters) +#define portTASK_FUNCTION_PROTO(vFunction, pvParameters) void vFunction(void *pvParameters) + +#endif /* __PORTMACRO_H__ */ +
diff --git a/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/MSP430X/data_model.h b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/MSP430X/data_model.h new file mode 100644 index 0000000..018a4b0 --- /dev/null +++ b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/MSP430X/data_model.h
@@ -0,0 +1,53 @@ +;/* +; * FreeRTOS Kernel V10.2.1 +; * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. +; * +; * Permission is hereby granted, free of charge, to any person obtaining a copy of +; * this software and associated documentation files (the "Software"), to deal in +; * the Software without restriction, including without limitation the rights to +; * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of +; * the Software, and to permit persons to whom the Software is furnished to do so, +; * subject to the following conditions: +; * +; * The above copyright notice and this permission notice shall be included in all +; * copies or substantial portions of the Software. +; * +; * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +; * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS +; * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR +; * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER +; * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +; * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +; * +; * http://www.FreeRTOS.org +; * http://aws.amazon.com/freertos +; * +; * 1 tab == 4 spaces! +; */ + + .if $DEFINED( __LARGE_DATA_MODEL__ ) + .define "pushm.a", pushm_x + .define "popm.a", popm_x + .define "push.a", push_x + .define "pop.a", pop_x + .define "mov.a", mov_x + .else + .define "pushm.w", pushm_x + .define "popm.w", popm_x + .define "push.w", push_x + .define "pop.w", pop_x + .define "mov.w", mov_x + .endif + + .if $DEFINED( __LARGE_CODE_MODEL__ ) + .define "calla", call_x + .define "reta", ret_x + .else + .define "call", call_x + .define "ret", ret_x + .endif + + + + +
diff --git a/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/MSP430X/port.c b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/MSP430X/port.c new file mode 100644 index 0000000..c9087ff --- /dev/null +++ b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/MSP430X/port.c
@@ -0,0 +1,187 @@ +/* + * FreeRTOS Kernel V10.2.1 + * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/* Scheduler includes. */ +#include "FreeRTOS.h" +#include "task.h" + +/*----------------------------------------------------------- + * Implementation of functions defined in portable.h for the MSP430X port. + *----------------------------------------------------------*/ + +/* Constants required for hardware setup. The tick ISR runs off the ACLK, +not the MCLK. */ +#define portACLK_FREQUENCY_HZ ( ( TickType_t ) 32768 ) +#define portINITIAL_CRITICAL_NESTING ( ( uint16_t ) 10 ) +#define portFLAGS_INT_ENABLED ( ( StackType_t ) 0x08 ) + +/* We require the address of the pxCurrentTCB variable, but don't want to know +any details of its type. */ +typedef void TCB_t; +extern volatile TCB_t * volatile pxCurrentTCB; + +/* Each task maintains a count of the critical section nesting depth. Each +time a critical section is entered the count is incremented. Each time a +critical section is exited the count is decremented - with interrupts only +being re-enabled if the count is zero. + +usCriticalNesting will get set to zero when the scheduler starts, but must +not be initialised to zero as this will cause problems during the startup +sequence. */ +volatile uint16_t usCriticalNesting = portINITIAL_CRITICAL_NESTING; +/*-----------------------------------------------------------*/ + + +/* + * Sets up the periodic ISR used for the RTOS tick. This uses timer 0, but + * could have alternatively used the watchdog timer or timer 1. + */ +void vPortSetupTimerInterrupt( void ); +/*-----------------------------------------------------------*/ + +/* + * Initialise the stack of a task to look exactly as if a call to + * portSAVE_CONTEXT had been called. + * + * See the header file portable.h. + */ +StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters ) +{ +uint16_t *pusTopOfStack; +uint32_t *pulTopOfStack, ulTemp; + + /* + Place a few bytes of known values on the bottom of the stack. + This is just useful for debugging and can be included if required. + + *pxTopOfStack = ( StackType_t ) 0x1111; + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x2222; + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x3333; + pxTopOfStack--; + */ + + /* Data types are need either 16 bits or 32 bits depending on the data + and code model used. */ + if( sizeof( pxCode ) == sizeof( uint16_t ) ) + { + pusTopOfStack = ( uint16_t * ) pxTopOfStack; + ulTemp = ( uint32_t ) pxCode; + *pusTopOfStack = ( uint16_t ) ulTemp; + } + else + { + /* Make room for a 20 bit value stored as a 32 bit value. */ + pusTopOfStack = ( uint16_t * ) pxTopOfStack; + pusTopOfStack--; + pulTopOfStack = ( uint32_t * ) pusTopOfStack; + *pulTopOfStack = ( uint32_t ) pxCode; + } + + pusTopOfStack--; + *pusTopOfStack = portFLAGS_INT_ENABLED; + pusTopOfStack -= ( sizeof( StackType_t ) / 2 ); + + /* From here on the size of stacked items depends on the memory model. */ + pxTopOfStack = ( StackType_t * ) pusTopOfStack; + + /* Next the general purpose registers. */ + #ifdef PRELOAD_REGISTER_VALUES + *pxTopOfStack = ( StackType_t ) 0xffff; + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0xeeee; + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0xdddd; + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) pvParameters; + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0xbbbb; + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0xaaaa; + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x9999; + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x8888; + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x5555; + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x6666; + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x5555; + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) 0x4444; + pxTopOfStack--; + #else + pxTopOfStack -= 3; + *pxTopOfStack = ( StackType_t ) pvParameters; + pxTopOfStack -= 9; + #endif + + /* A variable is used to keep track of the critical section nesting. + This variable has to be stored as part of the task context and is + initially set to zero. */ + *pxTopOfStack = ( StackType_t ) portNO_CRITICAL_SECTION_NESTING; + + /* Return a pointer to the top of the stack we have generated so this can + be stored in the task control block for the task. */ + return pxTopOfStack; +} +/*-----------------------------------------------------------*/ + +void vPortEndScheduler( void ) +{ + /* It is unlikely that the MSP430 port will get stopped. If required simply + disable the tick interrupt here. */ +} +/*-----------------------------------------------------------*/ + +/* + * Hardware initialisation to generate the RTOS tick. + */ +void vPortSetupTimerInterrupt( void ) +{ + vApplicationSetupTimerInterrupt(); +} +/*-----------------------------------------------------------*/ + +#pragma vector=configTICK_VECTOR +interrupt void vTickISREntry( void ) +{ +extern void vPortTickISR( void ); + + __bic_SR_register_on_exit( SCG1 + SCG0 + OSCOFF + CPUOFF ); + #if configUSE_PREEMPTION == 1 + extern void vPortPreemptiveTickISR( void ); + vPortPreemptiveTickISR(); + #else + extern void vPortCooperativeTickISR( void ); + vPortCooperativeTickISR(); + #endif +} + +
diff --git a/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/MSP430X/portext.asm b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/MSP430X/portext.asm new file mode 100644 index 0000000..9e29a5d --- /dev/null +++ b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/MSP430X/portext.asm
@@ -0,0 +1,159 @@ +;/* +; * FreeRTOS Kernel V10.2.1 +; * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. +; * +; * Permission is hereby granted, free of charge, to any person obtaining a copy of +; * this software and associated documentation files (the "Software"), to deal in +; * the Software without restriction, including without limitation the rights to +; * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of +; * the Software, and to permit persons to whom the Software is furnished to do so, +; * subject to the following conditions: +; * +; * The above copyright notice and this permission notice shall be included in all +; * copies or substantial portions of the Software. +; * +; * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +; * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS +; * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR +; * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER +; * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN +; * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +; * +; * http://www.FreeRTOS.org +; * http://aws.amazon.com/freertos +; * +; * 1 tab == 4 spaces! +; */ + +; * The definition of the "register test" tasks, as described at the top of +; * main.c + + .include data_model.h + + .global xTaskIncrementTick + .global vTaskSwitchContext + .global vPortSetupTimerInterrupt + .global pxCurrentTCB + .global usCriticalNesting + + .def vPortPreemptiveTickISR + .def vPortCooperativeTickISR + .def vPortYield + .def xPortStartScheduler + +;----------------------------------------------------------- + +portSAVE_CONTEXT .macro + + ;Save the remaining registers. + pushm_x #12, r15 + mov.w &usCriticalNesting, r14 + push_x r14 + mov_x &pxCurrentTCB, r12 + mov_x sp, 0( r12 ) + .endm +;----------------------------------------------------------- + +portRESTORE_CONTEXT .macro + + mov_x &pxCurrentTCB, r12 + mov_x @r12, sp + pop_x r15 + mov.w r15, &usCriticalNesting + popm_x #12, r15 + nop + pop.w sr + nop + ret_x + .endm +;----------------------------------------------------------- + +;* +;* The RTOS tick ISR. +;* +;* If the cooperative scheduler is in use this simply increments the tick +;* count. +;* +;* If the preemptive scheduler is in use a context switch can also occur. +;*/ + + .text + .align 2 + +vPortPreemptiveTickISR: .asmfunc + + ; The sr is not saved in portSAVE_CONTEXT() because vPortYield() needs + ;to save it manually before it gets modified (interrupts get disabled). + push.w sr + portSAVE_CONTEXT + + call_x #xTaskIncrementTick + call_x #vTaskSwitchContext + + portRESTORE_CONTEXT + .endasmfunc +;----------------------------------------------------------- + + .align 2 + +vPortCooperativeTickISR: .asmfunc + + ; The sr is not saved in portSAVE_CONTEXT() because vPortYield() needs + ;to save it manually before it gets modified (interrupts get disabled). + push.w sr + portSAVE_CONTEXT + + call_x #xTaskIncrementTick + + portRESTORE_CONTEXT + + .endasmfunc +;----------------------------------------------------------- + +; +; Manual context switch called by the portYIELD() macro. +; + + .align 2 + +vPortYield: .asmfunc + + ; The sr needs saving before it is modified. + push.w sr + + ; Now the SR is stacked we can disable interrupts. + dint + nop + + ; Save the context of the current task. + portSAVE_CONTEXT + + ; Select the next task to run. + call_x #vTaskSwitchContext + + ; Restore the context of the new task. + portRESTORE_CONTEXT + .endasmfunc +;----------------------------------------------------------- + + +; +; Start off the scheduler by initialising the RTOS tick timer, then restoring +; the context of the first task. +; + + .align 2 + +xPortStartScheduler: .asmfunc + + ; Setup the hardware to generate the tick. Interrupts are disabled + ; when this function is called. + call_x #vPortSetupTimerInterrupt + + ; Restore the context of the first task that is going to run. + portRESTORE_CONTEXT + .endasmfunc +;----------------------------------------------------------- + + .end +
diff --git a/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/MSP430X/portmacro.h b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/MSP430X/portmacro.h new file mode 100644 index 0000000..3a46b01 --- /dev/null +++ b/190725_FreeRTOS_IoT_Libs_Task_Pool_and_MQTT_Preview/FreeRTOS/Source/portable/CCS/MSP430X/portmacro.h
@@ -0,0 +1,143 @@ +/* + * FreeRTOS Kernel V10.2.1 + * Copyright (C) 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +#ifndef PORTMACRO_H +#define PORTMACRO_H + +/*----------------------------------------------------------- + * Port specific definitions. + * + * The settings in this file configure FreeRTOS correctly for the + * given hardware and compiler. + * + * These settings should not be altered. + *----------------------------------------------------------- + */ + +/* Hardware includes. */ +#include "msp430.h" + +/* Type definitions. */ +#define portCHAR char +#define portFLOAT float +#define portDOUBLE double +#define portLONG long +#define portSHORT int +#define portBASE_TYPE portSHORT + +/* The stack type changes depending on the data model. */ +#ifdef __LARGE_DATA_MODEL__ + #define portSTACK_TYPE uint32_t +#else + #define portSTACK_TYPE uint16_t + #define portPOINTER_SIZE_TYPE uint16_t +#endif + +typedef portSTACK_TYPE StackType_t; +typedef short BaseType_t; +typedef unsigned short UBaseType_t; + +#if( configUSE_16_BIT_TICKS == 1 ) + typedef uint16_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffff +#else + typedef uint32_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffffffffUL +#endif + +/*-----------------------------------------------------------*/ + +/* Interrupt control macros. */ +#define portDISABLE_INTERRUPTS() _disable_interrupt(); _nop() +#define portENABLE_INTERRUPTS() _enable_interrupt(); _nop() +/*-----------------------------------------------------------*/ + +/* Critical section control macros. */ +#define portNO_CRITICAL_SECTION_NESTING ( ( uint16_t ) 0 ) + +#define portENTER_CRITICAL() \ +{ \ +extern volatile uint16_t usCriticalNesting; \ + \ + portDISABLE_INTERRUPTS(); \ + \ + /* Now interrupts are disabled usCriticalNesting can be accessed */ \ + /* directly. Increment ulCriticalNesting to keep a count of how many */ \ + /* times portENTER_CRITICAL() has been called. */ \ + usCriticalNesting++; \ +} + +#define portEXIT_CRITICAL() \ +{ \ +extern volatile uint16_t usCriticalNesting; \ + \ + if( usCriticalNesting > portNO_CRITICAL_SECTION_NESTING ) \ + { \ + /* Decrement the nesting count as we are leaving a critical section. */ \ + usCriticalNesting--; \ + \ + /* If the nesting level has reached zero then interrupts should be */ \ + /* re-enabled. */ \ + if( usCriticalNesting == portNO_CRITICAL_SECTION_NESTING ) \ + { \ + portENABLE_INTERRUPTS(); \ + } \ + } \ +} +/*-----------------------------------------------------------*/ + +/* Task utilities. */ + +/* + * Manual context switch called by portYIELD or taskYIELD. + */ +extern void vPortYield( void ); +#define portYIELD() vPortYield() +/*-----------------------------------------------------------*/ + +/* Hardware specifics. */ +#define portBYTE_ALIGNMENT 2 +#define portSTACK_GROWTH ( -1 ) +#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ ) +#define portNOP() __no_operation() +/*-----------------------------------------------------------*/ + +/* Task function macros as described on the FreeRTOS.org WEB site. */ +#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters ) +#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters ) + +extern void vTaskSwitchContext( void ); +#define portYIELD_FROM_ISR( x ) if( x ) vPortYield() + +void vApplicationSetupTimerInterrupt( void ); + +/* sizeof( int ) != sizeof( long ) so a full printf() library is required if +run time stats information is to be displayed. */ +#define portLU_PRINTF_SPECIFIER_REQUIRED + +#endif /* PORTMACRO_H */ +