blob: a536596d8c5fe20e7cfe8b78317a1a408f796c25 [file]
// Licensed under the Apache-2.0 license
// SPDX-License-Identifier: Apache-2.0
#![no_std]
use core::ops::Range;
use memory_config::MemoryRegion;
pub use kernel_config::{
ClintTimerConfigInterface, ExceptionMode, KernelConfigInterface, RiscVKernelConfigInterface,
VeerPicConfigInterface,
};
//const RAM_BASE: usize = 0x4000_0000;
//const RAM_SIZE: usize = 384*1024;
//
//const UART0_BASE: usize = 0x1000_1000;
//const UART0_SIZE: usize = 0x100;
//
//const TIMER_BASE: usize = 0x4010_0000;
//const TIMER_SIZE: usize = 0x200;
//
//const PLIC_SIZE: usize = 0x0000_5400;
// MCU memory map for the selected target type, taken from upstream caliptra-mcu-sw
#[cfg(not(feature = "fpga"))]
use caliptra_mcu_config_emulator::{
EMULATOR_MCU_STRAPS as MCU_STRAPS, EMULATOR_MEMORY_MAP as MCU_MEMORY_MAP,
};
#[cfg(feature = "fpga")]
use caliptra_mcu_config_fpga::{FPGA_MCU_STRAPS as MCU_STRAPS, FPGA_MEMORY_MAP as MCU_MEMORY_MAP};
/// Whether the second I3C core (i3c1) is the one the platform straps select for
/// MCTP. The MCU ROM and runtime read the same strap, `active_i3c`, so this
/// follows what they set up. Only 1 selects i3c1; any other value is core 0, as
/// the ROM treats it.
const ACTIVE_I3C1: bool = MCU_STRAPS.active_i3c == 1;
/// Base of the MCI register block (MCU timer, device mappings).
pub const MCI_BASE: usize = MCU_MEMORY_MAP.mci_offset as usize;
/// Base of the Caliptra mailbox registers.
pub const MBOX_BASE: usize = MCU_MEMORY_MAP.mbox_offset as usize;
/// Base of the Caliptra SoC interface registers.
pub const SOC_IFC_BASE: usize = MCU_MEMORY_MAP.soc_offset as usize;
/// Base of the active I3C core's register block: core 0, or core 1 when the
/// platform straps select it.
pub const I3C_BASE: usize = if ACTIVE_I3C1 {
MCU_MEMORY_MAP.i3c1_offset
} else {
MCU_MEMORY_MAP.i3c_offset
} as usize;
/// PIC interrupt number of the active I3C core (core 0 is 2, core 1 is 3, as in
/// caliptra-mcu-sw's `I3C_IRQ` and `I3C1_IRQ`).
pub const I3C_IRQ: u32 = if ACTIVE_I3C1 { 3 } else { 2 };
/// Base of the region in DCCM where the MCU ROM leaves its handoff table.
pub const HANDOFF_BASE: usize = MCU_MEMORY_MAP.handoff_offset as usize;
const PIC_BASE: usize = MCU_MEMORY_MAP.pic_offset as usize;
const DCCM_BASE: usize = MCU_MEMORY_MAP.dccm_offset as usize;
pub struct KernelConfig;
impl KernelConfigInterface for KernelConfig {
#[cfg(feature = "silicon")]
const SYSTEM_CLOCK_HZ: u64 = 100_000_000;
// Matches TIMER_FREQUENCY_HZ in
// third_party/caliptra/caliptra-mcu-sw/platforms/fpga/runtime/src/main.rs,
// the confirmed clock rate for this core on the VCK190 build.
#[cfg(feature = "fpga")]
const SYSTEM_CLOCK_HZ: u64 = 20_000_000;
#[cfg(feature = "emulator")]
const SYSTEM_CLOCK_HZ: u64 = 1_000_000;
}
impl RiscVKernelConfigInterface for KernelConfig {
type Timer = TimerConfig;
const MTIME_HZ: u64 = KernelConfig::SYSTEM_CLOCK_HZ;
const PMP_ENTRIES: usize = 16;
const PMP_USERSPACE_ENTRIES: Range<usize> = Range {
start: 0usize,
end: 16usize,
};
const PMP_GRANULARITY: usize = 0;
const KERNEL_MEMORY_REGIONS: &'static [MemoryRegion] = &[];
fn get_exception_mode() -> ExceptionMode {
ExceptionMode::Vectored(unsafe { MTVEC_TABLE.as_ptr() as usize })
}
}
pub struct VeerPicConfig;
impl VeerPicConfigInterface for VeerPicConfig {
const PIC_BASE_ADDRESS: usize = PIC_BASE;
const MAX_IRQS: u32 = 256;
// The VeeR core requires the external-interrupt redirect table to live
// in DCCM. 256 IRQs * 4 bytes is the first 1 KiB of the 16 KiB DCCM. The
// ROM's handoff table is in the last 1 KiB.
const MEIVT_BASE_ADDRESS: usize = DCCM_BASE;
}
pub struct TimerConfig;
/// MCI `mcu_rv_mtime` register (the MCU timer lives in the MCI block).
pub const MTIME_REGISTER: usize = MCI_BASE + 0xe4;
/// MCI `mcu_rv_mtimecmp` register.
pub const MTIMECMP_REGISTER: usize = MCI_BASE + 0xec;
impl ClintTimerConfigInterface for TimerConfig {
const MTIME_REGISTER: usize = MTIME_REGISTER;
const MTIMECMP_REGISTER: usize = MTIMECMP_REGISTER;
}
unsafe extern "C" {
#[link_name = "_mtvec_table"]
static MTVEC_TABLE: [u32; 32];
}