fixed clipping issues

target/ast10x0/board/src/lib.rs

diff --git a/target/ast10x0/board/src/lib.rs b/target/ast10x0/board/src/lib.rs
index cf5b011..f9924ea 100644
--- a/target/ast10x0/board/src/lib.rs
+++ b/target/ast10x0/board/src/lib.rs
@@ -19,9 +19,10 @@
 
 pub use monitor::Ast1060Monitor;
 pub use spim_wiring::{
-    BmcSpimPathDebug, SpimWiring, SpimWiringError, apply_spim_external_mux, apply_spim_pinctrl,
-    apply_spim_wiring, apply_spim_wiring_with_log, bmc_spim_csin_levels, bmc_spim_path_debug,
-    enable_flash_power, presets, release_spi_flash_resets, set_bmc_resets, spim_external_mux_state,
+    apply_spim_external_mux, apply_spim_pinctrl, apply_spim_wiring, apply_spim_wiring_with_log,
+    bmc_spim_csin_levels, bmc_spim_path_debug, enable_flash_power, presets,
+    release_spi_flash_resets, set_bmc_resets, spim_external_mux_state, BmcSpimPathDebug,
+    SpimWiring, SpimWiringError,
 };
 
 pub use ast10x0_peripherals::i2c::{I2cConfig, I2cError};

target/ast10x0/board/src/spim_wiring.rs

diff --git a/target/ast10x0/board/src/spim_wiring.rs b/target/ast10x0/board/src/spim_wiring.rs
index 26bc7fe..5ad4586 100644
--- a/target/ast10x0/board/src/spim_wiring.rs
+++ b/target/ast10x0/board/src/spim_wiring.rs
@@ -10,20 +10,20 @@
 //! (`peripherals/spimonitor/planning/overview-and-usage-model.md`) calls for
 //! "configure early, validate, lock, and operate under that locked policy."
 
+use ast1060_pac as device;
 use ast10x0_peripherals::scu::{
-    ScuError, ScuExtMuxSelect, ScuRegisters, SpiMonitorInstance, SpiMonitorPassthrough,
-    SpiMonitorSource,
     pinctrl::{
         PINCTRL_GPIOL2, PINCTRL_GPIOL3, PINCTRL_SPIM1_DEFAULT, PINCTRL_SPIM2_DEFAULT,
         PINCTRL_SPIM3_DEFAULT, PINCTRL_SPIM4_DEFAULT,
     },
+    ScuError, ScuExtMuxSelect, ScuRegisters, SpiMonitorInstance, SpiMonitorPassthrough,
+    SpiMonitorSource,
 };
 use ast10x0_peripherals::smc::SmcController;
 use ast10x0_peripherals::spimonitor::{
     LockedSpiMonitor, MonitorPolicy, PassthroughMode, SpiMonitor, SpiMonitorController,
     SpiMonitorError, Uninitialized,
 };
-use ast1060_pac as device;
 
 /// Static wiring for one external SPI monitor path.
 ///
@@ -344,7 +344,11 @@
 }
 
 const fn update_bit(value: u32, mask: u32, set: bool) -> u32 {
-    if set { value | mask } else { value & !mask }
+    if set {
+        value | mask
+    } else {
+        value & !mask
+    }
 }
 
 /// Apply static SPIM wiring at controller-init time.
@@ -430,7 +434,7 @@
 /// Built-in `MonitorPolicy` presets vetted against the BMC's flash opcode set.
 pub mod presets {
     use ast10x0_peripherals::spimonitor::{
-        MonitorPolicy, PrivilegeDirection, PrivilegeOp, profile,
+        profile, MonitorPolicy, PrivilegeDirection, PrivilegeOp,
     };
 
     /// Allow-list for the BMC's normal flash opcodes covering both 3-byte and

target/ast10x0/peripherals/spimonitor/controller.rs

diff --git a/target/ast10x0/peripherals/spimonitor/controller.rs b/target/ast10x0/peripherals/spimonitor/controller.rs
index 8c13a18..e38a4c7 100644
--- a/target/ast10x0/peripherals/spimonitor/controller.rs
+++ b/target/ast10x0/peripherals/spimonitor/controller.rs
@@ -7,8 +7,8 @@
 
 use crate::scu::registers::ScuRegisters;
 use crate::scu::types::{ScuExtMuxSelect, SpiMonitorInstance};
-use crate::spimonitor::commands::{LOCKED as COMMAND_LOCKED, fixed_slot, table_value};
-use crate::spimonitor::policy::{MAX_REGION_SLOTS, MonitorPolicy};
+use crate::spimonitor::commands::{fixed_slot, table_value, LOCKED as COMMAND_LOCKED};
+use crate::spimonitor::policy::{MonitorPolicy, MAX_REGION_SLOTS};
 use crate::spimonitor::registers::{SpiMonitorController, SpiMonitorRegisters};
 use crate::spimonitor::types::{
     ExtMuxSel, LockState, MonitorState, PassthroughMode, PrivilegeDirection, PrivilegeOp, Result,

target/ast10x0/tests/spimonitor/setup_all_spim.rs

diff --git a/target/ast10x0/tests/spimonitor/setup_all_spim.rs b/target/ast10x0/tests/spimonitor/setup_all_spim.rs
index c720626..b6ba08c 100644
--- a/target/ast10x0/tests/spimonitor/setup_all_spim.rs
+++ b/target/ast10x0/tests/spimonitor/setup_all_spim.rs
@@ -16,7 +16,7 @@
     enable_flash_power, release_spi_flash_resets, set_bmc_resets, spim_external_mux_state,
 };
 use ast10x0_peripherals::scu::{
-    ScuExtMuxSelect, ScuRegisters, SpiMonitorInstance, SpiMonitorSource, pinctrl::PINCTRL_SPI1_QUAD,
+    pinctrl::PINCTRL_SPI1_QUAD, ScuExtMuxSelect, ScuRegisters, SpiMonitorInstance, SpiMonitorSource,
 };
 use ast10x0_peripherals::smc::{
     ChipSelect, FlashConfig, SmcConfig, SmcController, SmcError, SmcTopology, SpiReady, SpiUninit,
@@ -27,7 +27,7 @@
     ConfiguredSpiMonitor, LockedSpiMonitor, MonitorPolicy, PrivilegeDirection, PrivilegeOp,
     SpiMonitorController, ViolationLogEntry,
 };
-use target_common::{TargetInterface, declare_target};
+use target_common::{declare_target, TargetInterface};
 use test_common::TestConfig;
 use {console_backend as _, entry as _};