| /* ---------------------------------------------------------------------- |
| * Project: CMSIS DSP Library |
| * Title: arm_fir_sparse_q31.c |
| * Description: Q31 sparse FIR filter processing function |
| * |
| * $Date: 27. January 2017 |
| * $Revision: V.1.5.1 |
| * |
| * Target Processor: Cortex-M cores |
| * -------------------------------------------------------------------- */ |
| /* |
| * Copyright (C) 2010-2017 ARM Limited or its affiliates. All rights reserved. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the License); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an AS IS BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "arm_math.h" |
| |
| |
| /** |
| * @addtogroup FIR_Sparse |
| * @{ |
| */ |
| |
| /** |
| * @brief Processing function for the Q31 sparse FIR filter. |
| * @param[in] *S points to an instance of the Q31 sparse FIR structure. |
| * @param[in] *pSrc points to the block of input data. |
| * @param[out] *pDst points to the block of output data |
| * @param[in] *pScratchIn points to a temporary buffer of size blockSize. |
| * @param[in] blockSize number of input samples to process per call. |
| * @return none. |
| * |
| * <b>Scaling and Overflow Behavior:</b> |
| * \par |
| * The function is implemented using an internal 32-bit accumulator. |
| * The 1.31 x 1.31 multiplications are truncated to 2.30 format. |
| * This leads to loss of precision on the intermediate multiplications and provides only a single guard bit. |
| * If the accumulator result overflows, it wraps around rather than saturate. |
| * In order to avoid overflows the input signal or coefficients must be scaled down by log2(numTaps) bits. |
| */ |
| |
| void arm_fir_sparse_q31( |
| arm_fir_sparse_instance_q31 * S, |
| q31_t * pSrc, |
| q31_t * pDst, |
| q31_t * pScratchIn, |
| uint32_t blockSize) |
| { |
| |
| q31_t *pState = S->pState; /* State pointer */ |
| q31_t *pCoeffs = S->pCoeffs; /* Coefficient pointer */ |
| q31_t *px; /* Scratch buffer pointer */ |
| q31_t *py = pState; /* Temporary pointers for state buffer */ |
| q31_t *pb = pScratchIn; /* Temporary pointers for scratch buffer */ |
| q31_t *pOut; /* Destination pointer */ |
| q63_t out; /* Temporary output variable */ |
| int32_t *pTapDelay = S->pTapDelay; /* Pointer to the array containing offset of the non-zero tap values. */ |
| uint32_t delaySize = S->maxDelay + blockSize; /* state length */ |
| uint16_t numTaps = S->numTaps; /* Filter order */ |
| int32_t readIndex; /* Read index of the state buffer */ |
| uint32_t tapCnt, blkCnt; /* loop counters */ |
| q31_t coeff = *pCoeffs++; /* Read the first coefficient value */ |
| q31_t in; |
| |
| |
| /* BlockSize of Input samples are copied into the state buffer */ |
| /* StateIndex points to the starting position to write in the state buffer */ |
| arm_circularWrite_f32((int32_t *) py, delaySize, &S->stateIndex, 1, |
| (int32_t *) pSrc, 1, blockSize); |
| |
| /* Read Index, from where the state buffer should be read, is calculated. */ |
| readIndex = (int32_t) (S->stateIndex - blockSize) - *pTapDelay++; |
| |
| /* Wraparound of readIndex */ |
| if (readIndex < 0) |
| { |
| readIndex += (int32_t) delaySize; |
| } |
| |
| /* Working pointer for state buffer is updated */ |
| py = pState; |
| |
| /* blockSize samples are read from the state buffer */ |
| arm_circularRead_f32((int32_t *) py, delaySize, &readIndex, 1, |
| (int32_t *) pb, (int32_t *) pb, blockSize, 1, |
| blockSize); |
| |
| /* Working pointer for the scratch buffer of state values */ |
| px = pb; |
| |
| /* Working pointer for scratch buffer of output values */ |
| pOut = pDst; |
| |
| |
| #if defined (ARM_MATH_DSP) |
| |
| /* Run the below code for Cortex-M4 and Cortex-M3 */ |
| |
| /* Loop over the blockSize. Unroll by a factor of 4. |
| * Compute 4 Multiplications at a time. */ |
| blkCnt = blockSize >> 2; |
| |
| while (blkCnt > 0U) |
| { |
| /* Perform Multiplications and store in the destination buffer */ |
| *pOut++ = (q31_t) (((q63_t) * px++ * coeff) >> 32); |
| *pOut++ = (q31_t) (((q63_t) * px++ * coeff) >> 32); |
| *pOut++ = (q31_t) (((q63_t) * px++ * coeff) >> 32); |
| *pOut++ = (q31_t) (((q63_t) * px++ * coeff) >> 32); |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| |
| /* If the blockSize is not a multiple of 4, |
| * compute the remaining samples */ |
| blkCnt = blockSize % 0x4U; |
| |
| while (blkCnt > 0U) |
| { |
| /* Perform Multiplications and store in the destination buffer */ |
| *pOut++ = (q31_t) (((q63_t) * px++ * coeff) >> 32); |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| |
| /* Load the coefficient value and |
| * increment the coefficient buffer for the next set of state values */ |
| coeff = *pCoeffs++; |
| |
| /* Read Index, from where the state buffer should be read, is calculated. */ |
| readIndex = (int32_t) (S->stateIndex - blockSize) - *pTapDelay++; |
| |
| /* Wraparound of readIndex */ |
| if (readIndex < 0) |
| { |
| readIndex += (int32_t) delaySize; |
| } |
| |
| /* Loop over the number of taps. */ |
| tapCnt = (uint32_t) numTaps - 2U; |
| |
| while (tapCnt > 0U) |
| { |
| /* Working pointer for state buffer is updated */ |
| py = pState; |
| |
| /* blockSize samples are read from the state buffer */ |
| arm_circularRead_f32((int32_t *) py, delaySize, &readIndex, 1, |
| (int32_t *) pb, (int32_t *) pb, blockSize, 1, |
| blockSize); |
| |
| /* Working pointer for the scratch buffer of state values */ |
| px = pb; |
| |
| /* Working pointer for scratch buffer of output values */ |
| pOut = pDst; |
| |
| /* Loop over the blockSize. Unroll by a factor of 4. |
| * Compute 4 MACS at a time. */ |
| blkCnt = blockSize >> 2; |
| |
| while (blkCnt > 0U) |
| { |
| out = *pOut; |
| out += ((q63_t) * px++ * coeff) >> 32; |
| *pOut++ = (q31_t) (out); |
| |
| out = *pOut; |
| out += ((q63_t) * px++ * coeff) >> 32; |
| *pOut++ = (q31_t) (out); |
| |
| out = *pOut; |
| out += ((q63_t) * px++ * coeff) >> 32; |
| *pOut++ = (q31_t) (out); |
| |
| out = *pOut; |
| out += ((q63_t) * px++ * coeff) >> 32; |
| *pOut++ = (q31_t) (out); |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| |
| /* If the blockSize is not a multiple of 4, |
| * compute the remaining samples */ |
| blkCnt = blockSize % 0x4U; |
| |
| while (blkCnt > 0U) |
| { |
| /* Perform Multiply-Accumulate */ |
| out = *pOut; |
| out += ((q63_t) * px++ * coeff) >> 32; |
| *pOut++ = (q31_t) (out); |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| |
| /* Load the coefficient value and |
| * increment the coefficient buffer for the next set of state values */ |
| coeff = *pCoeffs++; |
| |
| /* Read Index, from where the state buffer should be read, is calculated. */ |
| readIndex = (int32_t) (S->stateIndex - blockSize) - *pTapDelay++; |
| |
| /* Wraparound of readIndex */ |
| if (readIndex < 0) |
| { |
| readIndex += (int32_t) delaySize; |
| } |
| |
| /* Decrement the tap loop counter */ |
| tapCnt--; |
| } |
| |
| /* Compute last tap without the final read of pTapDelay */ |
| |
| /* Working pointer for state buffer is updated */ |
| py = pState; |
| |
| /* blockSize samples are read from the state buffer */ |
| arm_circularRead_f32((int32_t *) py, delaySize, &readIndex, 1, |
| (int32_t *) pb, (int32_t *) pb, blockSize, 1, |
| blockSize); |
| |
| /* Working pointer for the scratch buffer of state values */ |
| px = pb; |
| |
| /* Working pointer for scratch buffer of output values */ |
| pOut = pDst; |
| |
| /* Loop over the blockSize. Unroll by a factor of 4. |
| * Compute 4 MACS at a time. */ |
| blkCnt = blockSize >> 2; |
| |
| while (blkCnt > 0U) |
| { |
| out = *pOut; |
| out += ((q63_t) * px++ * coeff) >> 32; |
| *pOut++ = (q31_t) (out); |
| |
| out = *pOut; |
| out += ((q63_t) * px++ * coeff) >> 32; |
| *pOut++ = (q31_t) (out); |
| |
| out = *pOut; |
| out += ((q63_t) * px++ * coeff) >> 32; |
| *pOut++ = (q31_t) (out); |
| |
| out = *pOut; |
| out += ((q63_t) * px++ * coeff) >> 32; |
| *pOut++ = (q31_t) (out); |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| |
| /* If the blockSize is not a multiple of 4, |
| * compute the remaining samples */ |
| blkCnt = blockSize % 0x4U; |
| |
| while (blkCnt > 0U) |
| { |
| /* Perform Multiply-Accumulate */ |
| out = *pOut; |
| out += ((q63_t) * px++ * coeff) >> 32; |
| *pOut++ = (q31_t) (out); |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| |
| /* Working output pointer is updated */ |
| pOut = pDst; |
| |
| /* Output is converted into 1.31 format. */ |
| /* Loop over the blockSize. Unroll by a factor of 4. |
| * process 4 output samples at a time. */ |
| blkCnt = blockSize >> 2; |
| |
| while (blkCnt > 0U) |
| { |
| in = *pOut << 1; |
| *pOut++ = in; |
| in = *pOut << 1; |
| *pOut++ = in; |
| in = *pOut << 1; |
| *pOut++ = in; |
| in = *pOut << 1; |
| *pOut++ = in; |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| |
| /* If the blockSize is not a multiple of 4, |
| * process the remaining output samples */ |
| blkCnt = blockSize % 0x4U; |
| |
| while (blkCnt > 0U) |
| { |
| in = *pOut << 1; |
| *pOut++ = in; |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| |
| #else |
| |
| /* Run the below code for Cortex-M0 */ |
| blkCnt = blockSize; |
| |
| while (blkCnt > 0U) |
| { |
| /* Perform Multiplications and store in the destination buffer */ |
| *pOut++ = (q31_t) (((q63_t) * px++ * coeff) >> 32); |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| |
| /* Load the coefficient value and |
| * increment the coefficient buffer for the next set of state values */ |
| coeff = *pCoeffs++; |
| |
| /* Read Index, from where the state buffer should be read, is calculated. */ |
| readIndex = (int32_t) (S->stateIndex - blockSize) - *pTapDelay++; |
| |
| /* Wraparound of readIndex */ |
| if (readIndex < 0) |
| { |
| readIndex += (int32_t) delaySize; |
| } |
| |
| /* Loop over the number of taps. */ |
| tapCnt = (uint32_t) numTaps - 2U; |
| |
| while (tapCnt > 0U) |
| { |
| /* Working pointer for state buffer is updated */ |
| py = pState; |
| |
| /* blockSize samples are read from the state buffer */ |
| arm_circularRead_f32((int32_t *) py, delaySize, &readIndex, 1, |
| (int32_t *) pb, (int32_t *) pb, blockSize, 1, |
| blockSize); |
| |
| /* Working pointer for the scratch buffer of state values */ |
| px = pb; |
| |
| /* Working pointer for scratch buffer of output values */ |
| pOut = pDst; |
| |
| blkCnt = blockSize; |
| |
| while (blkCnt > 0U) |
| { |
| /* Perform Multiply-Accumulate */ |
| out = *pOut; |
| out += ((q63_t) * px++ * coeff) >> 32; |
| *pOut++ = (q31_t) (out); |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| |
| /* Load the coefficient value and |
| * increment the coefficient buffer for the next set of state values */ |
| coeff = *pCoeffs++; |
| |
| /* Read Index, from where the state buffer should be read, is calculated. */ |
| readIndex = (int32_t) (S->stateIndex - blockSize) - *pTapDelay++; |
| |
| /* Wraparound of readIndex */ |
| if (readIndex < 0) |
| { |
| readIndex += (int32_t) delaySize; |
| } |
| |
| /* Decrement the tap loop counter */ |
| tapCnt--; |
| } |
| |
| /* Compute last tap without the final read of pTapDelay */ |
| |
| /* Working pointer for state buffer is updated */ |
| py = pState; |
| |
| /* blockSize samples are read from the state buffer */ |
| arm_circularRead_f32((int32_t *) py, delaySize, &readIndex, 1, |
| (int32_t *) pb, (int32_t *) pb, blockSize, 1, |
| blockSize); |
| |
| /* Working pointer for the scratch buffer of state values */ |
| px = pb; |
| |
| /* Working pointer for scratch buffer of output values */ |
| pOut = pDst; |
| |
| blkCnt = blockSize; |
| |
| while (blkCnt > 0U) |
| { |
| /* Perform Multiply-Accumulate */ |
| out = *pOut; |
| out += ((q63_t) * px++ * coeff) >> 32; |
| *pOut++ = (q31_t) (out); |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| |
| /* Working output pointer is updated */ |
| pOut = pDst; |
| |
| /* Output is converted into 1.31 format. */ |
| blkCnt = blockSize; |
| |
| while (blkCnt > 0U) |
| { |
| in = *pOut << 1; |
| *pOut++ = in; |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| |
| #endif /* #if defined (ARM_MATH_DSP) */ |
| |
| } |
| |
| /** |
| * @} end of FIR_Sparse group |
| */ |