| /* ---------------------------------------------------------------------- |
| * Copyright (C) 2010-2014 ARM Limited. All rights reserved. |
| * |
| * $Date: 19. March 2015 |
| * $Revision: V.1.4.5 |
| * |
| * Project: CMSIS DSP Library |
| * Title: arm_conv_opt_q7.c |
| * |
| * Description: Convolution of Q7 sequences. |
| * |
| * Target Processor: Cortex-M4/Cortex-M3/Cortex-M0 |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * - Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * - Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * - Neither the name of ARM LIMITED nor the names of its contributors |
| * may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS |
| * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE |
| * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, |
| * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, |
| * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN |
| * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| * -------------------------------------------------------------------- */ |
| |
| #include "arm_math.h" |
| |
| /** |
| * @ingroup groupFilters |
| */ |
| |
| /** |
| * @addtogroup Conv |
| * @{ |
| */ |
| |
| /** |
| * @brief Convolution of Q7 sequences. |
| * @param[in] *pSrcA points to the first input sequence. |
| * @param[in] srcALen length of the first input sequence. |
| * @param[in] *pSrcB points to the second input sequence. |
| * @param[in] srcBLen length of the second input sequence. |
| * @param[out] *pDst points to the location where the output result is written. Length srcALen+srcBLen-1. |
| * @param[in] *pScratch1 points to scratch buffer(of type q15_t) of size max(srcALen, srcBLen) + 2*min(srcALen, srcBLen) - 2. |
| * @param[in] *pScratch2 points to scratch buffer (of type q15_t) of size min(srcALen, srcBLen). |
| * @return none. |
| * |
| * \par Restrictions |
| * If the silicon does not support unaligned memory access enable the macro UNALIGNED_SUPPORT_DISABLE |
| * In this case input, output, scratch1 and scratch2 buffers should be aligned by 32-bit |
| * |
| * @details |
| * <b>Scaling and Overflow Behavior:</b> |
| * |
| * \par |
| * The function is implemented using a 32-bit internal accumulator. |
| * Both the inputs are represented in 1.7 format and multiplications yield a 2.14 result. |
| * The 2.14 intermediate results are accumulated in a 32-bit accumulator in 18.14 format. |
| * This approach provides 17 guard bits and there is no risk of overflow as long as <code>max(srcALen, srcBLen)<131072</code>. |
| * The 18.14 result is then truncated to 18.7 format by discarding the low 7 bits and then saturated to 1.7 format. |
| * |
| */ |
| |
| void arm_conv_opt_q7( |
| q7_t * pSrcA, |
| uint32_t srcALen, |
| q7_t * pSrcB, |
| uint32_t srcBLen, |
| q7_t * pDst, |
| q15_t * pScratch1, |
| q15_t * pScratch2) |
| { |
| |
| q15_t *pScr2, *pScr1; /* Intermediate pointers for scratch pointers */ |
| q15_t x4; /* Temporary input variable */ |
| q7_t *pIn1, *pIn2; /* inputA and inputB pointer */ |
| uint32_t j, k, blkCnt, tapCnt; /* loop counter */ |
| q7_t *px; /* Temporary input1 pointer */ |
| q15_t *py; /* Temporary input2 pointer */ |
| q31_t acc0, acc1, acc2, acc3; /* Accumulator */ |
| q31_t x1, x2, x3, y1; /* Temporary input variables */ |
| q7_t *pOut = pDst; /* output pointer */ |
| q7_t out0, out1, out2, out3; /* temporary variables */ |
| |
| /* The algorithm implementation is based on the lengths of the inputs. */ |
| /* srcB is always made to slide across srcA. */ |
| /* So srcBLen is always considered as shorter or equal to srcALen */ |
| if(srcALen >= srcBLen) |
| { |
| /* Initialization of inputA pointer */ |
| pIn1 = pSrcA; |
| |
| /* Initialization of inputB pointer */ |
| pIn2 = pSrcB; |
| } |
| else |
| { |
| /* Initialization of inputA pointer */ |
| pIn1 = pSrcB; |
| |
| /* Initialization of inputB pointer */ |
| pIn2 = pSrcA; |
| |
| /* srcBLen is always considered as shorter or equal to srcALen */ |
| j = srcBLen; |
| srcBLen = srcALen; |
| srcALen = j; |
| } |
| |
| /* pointer to take end of scratch2 buffer */ |
| pScr2 = pScratch2; |
| |
| /* points to smaller length sequence */ |
| px = pIn2 + srcBLen - 1; |
| |
| /* Apply loop unrolling and do 4 Copies simultaneously. */ |
| k = srcBLen >> 2u; |
| |
| /* First part of the processing with loop unrolling copies 4 data points at a time. |
| ** a second loop below copies for the remaining 1 to 3 samples. */ |
| while(k > 0u) |
| { |
| /* copy second buffer in reversal manner */ |
| x4 = (q15_t) * px--; |
| *pScr2++ = x4; |
| x4 = (q15_t) * px--; |
| *pScr2++ = x4; |
| x4 = (q15_t) * px--; |
| *pScr2++ = x4; |
| x4 = (q15_t) * px--; |
| *pScr2++ = x4; |
| |
| /* Decrement the loop counter */ |
| k--; |
| } |
| |
| /* If the count is not a multiple of 4, copy remaining samples here. |
| ** No loop unrolling is used. */ |
| k = srcBLen % 0x4u; |
| |
| while(k > 0u) |
| { |
| /* copy second buffer in reversal manner for remaining samples */ |
| x4 = (q15_t) * px--; |
| *pScr2++ = x4; |
| |
| /* Decrement the loop counter */ |
| k--; |
| } |
| |
| /* Initialze temporary scratch pointer */ |
| pScr1 = pScratch1; |
| |
| /* Fill (srcBLen - 1u) zeros in scratch buffer */ |
| arm_fill_q15(0, pScr1, (srcBLen - 1u)); |
| |
| /* Update temporary scratch pointer */ |
| pScr1 += (srcBLen - 1u); |
| |
| /* Copy (srcALen) samples in scratch buffer */ |
| /* Apply loop unrolling and do 4 Copies simultaneously. */ |
| k = srcALen >> 2u; |
| |
| /* First part of the processing with loop unrolling copies 4 data points at a time. |
| ** a second loop below copies for the remaining 1 to 3 samples. */ |
| while(k > 0u) |
| { |
| /* copy second buffer in reversal manner */ |
| x4 = (q15_t) * pIn1++; |
| *pScr1++ = x4; |
| x4 = (q15_t) * pIn1++; |
| *pScr1++ = x4; |
| x4 = (q15_t) * pIn1++; |
| *pScr1++ = x4; |
| x4 = (q15_t) * pIn1++; |
| *pScr1++ = x4; |
| |
| /* Decrement the loop counter */ |
| k--; |
| } |
| |
| /* If the count is not a multiple of 4, copy remaining samples here. |
| ** No loop unrolling is used. */ |
| k = srcALen % 0x4u; |
| |
| while(k > 0u) |
| { |
| /* copy second buffer in reversal manner for remaining samples */ |
| x4 = (q15_t) * pIn1++; |
| *pScr1++ = x4; |
| |
| /* Decrement the loop counter */ |
| k--; |
| } |
| |
| #ifndef UNALIGNED_SUPPORT_DISABLE |
| |
| /* Fill (srcBLen - 1u) zeros at end of scratch buffer */ |
| arm_fill_q15(0, pScr1, (srcBLen - 1u)); |
| |
| /* Update pointer */ |
| pScr1 += (srcBLen - 1u); |
| |
| #else |
| |
| /* Apply loop unrolling and do 4 Copies simultaneously. */ |
| k = (srcBLen - 1u) >> 2u; |
| |
| /* First part of the processing with loop unrolling copies 4 data points at a time. |
| ** a second loop below copies for the remaining 1 to 3 samples. */ |
| while(k > 0u) |
| { |
| /* copy second buffer in reversal manner */ |
| *pScr1++ = 0; |
| *pScr1++ = 0; |
| *pScr1++ = 0; |
| *pScr1++ = 0; |
| |
| /* Decrement the loop counter */ |
| k--; |
| } |
| |
| /* If the count is not a multiple of 4, copy remaining samples here. |
| ** No loop unrolling is used. */ |
| k = (srcBLen - 1u) % 0x4u; |
| |
| while(k > 0u) |
| { |
| /* copy second buffer in reversal manner for remaining samples */ |
| *pScr1++ = 0; |
| |
| /* Decrement the loop counter */ |
| k--; |
| } |
| |
| #endif |
| |
| /* Temporary pointer for scratch2 */ |
| py = pScratch2; |
| |
| /* Initialization of pIn2 pointer */ |
| pIn2 = (q7_t *) py; |
| |
| pScr2 = py; |
| |
| /* Actual convolution process starts here */ |
| blkCnt = (srcALen + srcBLen - 1u) >> 2; |
| |
| while(blkCnt > 0) |
| { |
| /* Initialze temporary scratch pointer as scratch1 */ |
| pScr1 = pScratch1; |
| |
| /* Clear Accumlators */ |
| acc0 = 0; |
| acc1 = 0; |
| acc2 = 0; |
| acc3 = 0; |
| |
| /* Read two samples from scratch1 buffer */ |
| x1 = *__SIMD32(pScr1)++; |
| |
| /* Read next two samples from scratch1 buffer */ |
| x2 = *__SIMD32(pScr1)++; |
| |
| tapCnt = (srcBLen) >> 2u; |
| |
| while(tapCnt > 0u) |
| { |
| |
| /* Read four samples from smaller buffer */ |
| y1 = _SIMD32_OFFSET(pScr2); |
| |
| /* multiply and accumlate */ |
| acc0 = __SMLAD(x1, y1, acc0); |
| acc2 = __SMLAD(x2, y1, acc2); |
| |
| /* pack input data */ |
| #ifndef ARM_MATH_BIG_ENDIAN |
| x3 = __PKHBT(x2, x1, 0); |
| #else |
| x3 = __PKHBT(x1, x2, 0); |
| #endif |
| |
| /* multiply and accumlate */ |
| acc1 = __SMLADX(x3, y1, acc1); |
| |
| /* Read next two samples from scratch1 buffer */ |
| x1 = *__SIMD32(pScr1)++; |
| |
| /* pack input data */ |
| #ifndef ARM_MATH_BIG_ENDIAN |
| x3 = __PKHBT(x1, x2, 0); |
| #else |
| x3 = __PKHBT(x2, x1, 0); |
| #endif |
| |
| acc3 = __SMLADX(x3, y1, acc3); |
| |
| /* Read four samples from smaller buffer */ |
| y1 = _SIMD32_OFFSET(pScr2 + 2u); |
| |
| acc0 = __SMLAD(x2, y1, acc0); |
| |
| acc2 = __SMLAD(x1, y1, acc2); |
| |
| acc1 = __SMLADX(x3, y1, acc1); |
| |
| x2 = *__SIMD32(pScr1)++; |
| |
| #ifndef ARM_MATH_BIG_ENDIAN |
| x3 = __PKHBT(x2, x1, 0); |
| #else |
| x3 = __PKHBT(x1, x2, 0); |
| #endif |
| |
| acc3 = __SMLADX(x3, y1, acc3); |
| |
| pScr2 += 4u; |
| |
| |
| /* Decrement the loop counter */ |
| tapCnt--; |
| } |
| |
| |
| |
| /* Update scratch pointer for remaining samples of smaller length sequence */ |
| pScr1 -= 4u; |
| |
| |
| /* apply same above for remaining samples of smaller length sequence */ |
| tapCnt = (srcBLen) & 3u; |
| |
| while(tapCnt > 0u) |
| { |
| |
| /* accumlate the results */ |
| acc0 += (*pScr1++ * *pScr2); |
| acc1 += (*pScr1++ * *pScr2); |
| acc2 += (*pScr1++ * *pScr2); |
| acc3 += (*pScr1++ * *pScr2++); |
| |
| pScr1 -= 3u; |
| |
| /* Decrement the loop counter */ |
| tapCnt--; |
| } |
| |
| blkCnt--; |
| |
| /* Store the result in the accumulator in the destination buffer. */ |
| out0 = (q7_t) (__SSAT(acc0 >> 7u, 8)); |
| out1 = (q7_t) (__SSAT(acc1 >> 7u, 8)); |
| out2 = (q7_t) (__SSAT(acc2 >> 7u, 8)); |
| out3 = (q7_t) (__SSAT(acc3 >> 7u, 8)); |
| |
| *__SIMD32(pOut)++ = __PACKq7(out0, out1, out2, out3); |
| |
| /* Initialization of inputB pointer */ |
| pScr2 = py; |
| |
| pScratch1 += 4u; |
| |
| } |
| |
| |
| blkCnt = (srcALen + srcBLen - 1u) & 0x3; |
| |
| /* Calculate convolution for remaining samples of Bigger length sequence */ |
| while(blkCnt > 0) |
| { |
| /* Initialze temporary scratch pointer as scratch1 */ |
| pScr1 = pScratch1; |
| |
| /* Clear Accumlators */ |
| acc0 = 0; |
| |
| tapCnt = (srcBLen) >> 1u; |
| |
| while(tapCnt > 0u) |
| { |
| acc0 += (*pScr1++ * *pScr2++); |
| acc0 += (*pScr1++ * *pScr2++); |
| |
| /* Decrement the loop counter */ |
| tapCnt--; |
| } |
| |
| tapCnt = (srcBLen) & 1u; |
| |
| /* apply same above for remaining samples of smaller length sequence */ |
| while(tapCnt > 0u) |
| { |
| |
| /* accumlate the results */ |
| acc0 += (*pScr1++ * *pScr2++); |
| |
| /* Decrement the loop counter */ |
| tapCnt--; |
| } |
| |
| blkCnt--; |
| |
| /* Store the result in the accumulator in the destination buffer. */ |
| *pOut++ = (q7_t) (__SSAT(acc0 >> 7u, 8)); |
| |
| /* Initialization of inputB pointer */ |
| pScr2 = py; |
| |
| pScratch1 += 1u; |
| |
| } |
| |
| } |
| |
| |
| /** |
| * @} end of Conv group |
| */ |