| /* ---------------------------------------------------------------------- |
| * Project: CMSIS DSP Library |
| * Title: arm_conv_f32.c |
| * Description: Convolution of floating-point sequences |
| * |
| * $Date: 18. March 2019 |
| * $Revision: V1.6.0 |
| * |
| * Target Processor: Cortex-M cores |
| * -------------------------------------------------------------------- */ |
| /* |
| * Copyright (C) 2010-2019 ARM Limited or its affiliates. All rights reserved. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the License); you may |
| * not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an AS IS BASIS, WITHOUT |
| * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "arm_math.h" |
| |
| /** |
| @ingroup groupFilters |
| */ |
| |
| /** |
| @defgroup Conv Convolution |
| |
| Convolution is a mathematical operation that operates on two finite length vectors to generate a finite length output vector. |
| Convolution is similar to correlation and is frequently used in filtering and data analysis. |
| The CMSIS DSP library contains functions for convolving Q7, Q15, Q31, and floating-point data types. |
| The library also provides fast versions of the Q15 and Q31 functions. |
| |
| @par Algorithm |
| Let <code>a[n]</code> and <code>b[n]</code> be sequences of length <code>srcALen</code> and |
| <code>srcBLen</code> samples respectively. Then the convolution |
| <pre> |
| c[n] = a[n] * b[n] |
| </pre> |
| @par |
| is defined as |
| \image html ConvolutionEquation.gif |
| @par |
| Note that <code>c[n]</code> is of length <code>srcALen + srcBLen - 1</code> and is defined over the interval <code>n=0, 1, 2, ..., srcALen + srcBLen - 2</code>. |
| <code>pSrcA</code> points to the first input vector of length <code>srcALen</code> and |
| <code>pSrcB</code> points to the second input vector of length <code>srcBLen</code>. |
| The output result is written to <code>pDst</code> and the calling function must allocate <code>srcALen+srcBLen-1</code> words for the result. |
| @par |
| Conceptually, when two signals <code>a[n]</code> and <code>b[n]</code> are convolved, |
| the signal <code>b[n]</code> slides over <code>a[n]</code>. |
| For each offset \c n, the overlapping portions of a[n] and b[n] are multiplied and summed together. |
| @par |
| Note that convolution is a commutative operation: |
| <pre> |
| a[n] * b[n] = b[n] * a[n]. |
| </pre> |
| @par |
| This means that switching the A and B arguments to the convolution functions has no effect. |
| |
| @par Fixed-Point Behavior |
| Convolution requires summing up a large number of intermediate products. |
| As such, the Q7, Q15, and Q31 functions run a risk of overflow and saturation. |
| Refer to the function specific documentation below for further details of the particular algorithm used. |
| |
| @par Fast Versions |
| Fast versions are supported for Q31 and Q15. Cycles for Fast versions are less compared to Q31 and Q15 of conv and the design requires |
| the input signals should be scaled down to avoid intermediate overflows. |
| |
| @par Opt Versions |
| Opt versions are supported for Q15 and Q7. Design uses internal scratch buffer for getting good optimisation. |
| These versions are optimised in cycles and consumes more memory (Scratch memory) compared to Q15 and Q7 versions |
| */ |
| |
| /** |
| @addtogroup Conv |
| @{ |
| */ |
| |
| /** |
| @brief Convolution of floating-point sequences. |
| @param[in] pSrcA points to the first input sequence |
| @param[in] srcALen length of the first input sequence |
| @param[in] pSrcB points to the second input sequence |
| @param[in] srcBLen length of the second input sequence |
| @param[out] pDst points to the location where the output result is written. Length srcALen+srcBLen-1. |
| @return none |
| */ |
| |
| void arm_conv_f32( |
| const float32_t * pSrcA, |
| uint32_t srcALen, |
| const float32_t * pSrcB, |
| uint32_t srcBLen, |
| float32_t * pDst) |
| { |
| |
| #if (1) |
| //#if !defined(ARM_MATH_CM0_FAMILY) |
| |
| const float32_t *pIn1; /* InputA pointer */ |
| const float32_t *pIn2; /* InputB pointer */ |
| float32_t *pOut = pDst; /* Output pointer */ |
| const float32_t *px; /* Intermediate inputA pointer */ |
| const float32_t *py; /* Intermediate inputB pointer */ |
| const float32_t *pSrc1, *pSrc2; /* Intermediate pointers */ |
| float32_t sum; /* Accumulators */ |
| uint32_t blockSize1, blockSize2, blockSize3; /* Loop counters */ |
| uint32_t j, k, count, blkCnt; /* Loop counters */ |
| |
| #if defined (ARM_MATH_LOOPUNROLL) || defined(ARM_MATH_NEON) |
| float32_t acc0, acc1, acc2, acc3; /* Accumulators */ |
| float32_t x0, x1, x2, x3, c0; /* Temporary variables to hold state and coefficient values */ |
| #endif |
| |
| /* The algorithm implementation is based on the lengths of the inputs. */ |
| /* srcB is always made to slide across srcA. */ |
| /* So srcBLen is always considered as shorter or equal to srcALen */ |
| if (srcALen >= srcBLen) |
| { |
| /* Initialization of inputA pointer */ |
| pIn1 = pSrcA; |
| |
| /* Initialization of inputB pointer */ |
| pIn2 = pSrcB; |
| } |
| else |
| { |
| /* Initialization of inputA pointer */ |
| pIn1 = pSrcB; |
| |
| /* Initialization of inputB pointer */ |
| pIn2 = pSrcA; |
| |
| /* srcBLen is always considered as shorter or equal to srcALen */ |
| j = srcBLen; |
| srcBLen = srcALen; |
| srcALen = j; |
| } |
| |
| /* conv(x,y) at n = x[n] * y[0] + x[n-1] * y[1] + x[n-2] * y[2] + ...+ x[n-N+1] * y[N -1] */ |
| /* The function is internally |
| * divided into three stages according to the number of multiplications that has to be |
| * taken place between inputA samples and inputB samples. In the first stage of the |
| * algorithm, the multiplications increase by one for every iteration. |
| * In the second stage of the algorithm, srcBLen number of multiplications are done. |
| * In the third stage of the algorithm, the multiplications decrease by one |
| * for every iteration. */ |
| |
| /* The algorithm is implemented in three stages. |
| The loop counters of each stage is initiated here. */ |
| blockSize1 = srcBLen - 1U; |
| blockSize2 = srcALen - (srcBLen - 1U); |
| blockSize3 = blockSize1; |
| |
| /* -------------------------- |
| * Initializations of stage1 |
| * -------------------------*/ |
| |
| /* sum = x[0] * y[0] |
| * sum = x[0] * y[1] + x[1] * y[0] |
| * .... |
| * sum = x[0] * y[srcBlen - 1] + x[1] * y[srcBlen - 2] +...+ x[srcBLen - 1] * y[0] |
| */ |
| |
| /* In this stage the MAC operations are increased by 1 for every iteration. |
| The count variable holds the number of MAC operations performed */ |
| count = 1U; |
| |
| /* Working pointer of inputA */ |
| px = pIn1; |
| |
| /* Working pointer of inputB */ |
| py = pIn2; |
| |
| |
| /* ------------------------ |
| * Stage1 process |
| * ----------------------*/ |
| #if defined(ARM_MATH_NEON) |
| float32x4_t vec1; |
| float32x4_t vec2; |
| float32x4_t res = vdupq_n_f32(0) ; |
| float32x2_t accum = vdup_n_f32(0); |
| #endif /* #if defined(ARM_MATH_NEON) */ |
| |
| /* The first stage starts here */ |
| while (blockSize1 > 0U) |
| { |
| /* Accumulator is made zero for every iteration */ |
| sum = 0.0f; |
| |
| #if defined (ARM_MATH_LOOPUNROLL) || defined(ARM_MATH_NEON) |
| /* Loop unrolling: Compute 4 outputs at a time */ |
| k = count >> 2U; |
| |
| #if defined(ARM_MATH_NEON) |
| res = vdupq_n_f32(0) ; |
| accum = vdup_n_f32(0); |
| |
| /* Compute 4 MACs simultaneously. */ |
| k = count >> 2U; |
| |
| /* First part of the processing. Compute 4 MACs at a time. |
| ** a second loop below computes MACs for the remaining 1 to 3 samples. */ |
| |
| while (k > 0U) |
| { |
| vec1 = vld1q_f32(px); |
| vec2 = vld1q_f32(py-3); |
| vec2 = vrev64q_f32(vec2); |
| vec2 = vcombine_f32(vget_high_f32(vec2), vget_low_f32(vec2)); |
| |
| res = vmlaq_f32(res,vec1, vec2); |
| |
| /* Increment pointers */ |
| px += 4; |
| py -= 4; |
| |
| /* Decrement the loop counter */ |
| k--; |
| } |
| |
| accum = vpadd_f32(vget_low_f32(res), vget_high_f32(res)); |
| sum += accum[0] + accum[1]; |
| |
| /* If the count is not a multiple of 4, compute any remaining MACs here. |
| ** No loop unrolling is used. */ |
| k = count & 3; |
| #else |
| while (k > 0U) |
| { |
| /* x[0] * y[srcBLen - 1] */ |
| sum += *px++ * *py--; |
| |
| /* x[1] * y[srcBLen - 2] */ |
| sum += *px++ * *py--; |
| |
| /* x[2] * y[srcBLen - 3] */ |
| sum += *px++ * *py--; |
| |
| /* x[3] * y[srcBLen - 4] */ |
| sum += *px++ * *py--; |
| |
| /* Decrement loop counter */ |
| k--; |
| } |
| |
| /* Loop unrolling: Compute remaining outputs */ |
| k = count % 0x4U; |
| |
| #endif /* #if defined(ARM_MATH_NEON) */ |
| |
| #else |
| /* Initialize k with number of samples */ |
| k = count; |
| |
| #endif /* #if defined (ARM_MATH_LOOPUNROLL) || defined(ARM_MATH_NEON) */ |
| |
| while (k > 0U) |
| { |
| /* Perform the multiply-accumulate */ |
| sum += *px++ * *py--; |
| |
| /* Decrement loop counter */ |
| k--; |
| } |
| |
| /* Store the result in the accumulator in the destination buffer. */ |
| *pOut++ = sum; |
| |
| /* Update the inputA and inputB pointers for next MAC calculation */ |
| py = pIn2 + count; |
| px = pIn1; |
| |
| /* Increment MAC count */ |
| count++; |
| |
| /* Decrement loop counter */ |
| blockSize1--; |
| } |
| |
| /* -------------------------- |
| * Initializations of stage2 |
| * ------------------------*/ |
| |
| /* sum = x[0] * y[srcBLen-1] + x[1] * y[srcBLen-2] +...+ x[srcBLen-1] * y[0] |
| * sum = x[1] * y[srcBLen-1] + x[2] * y[srcBLen-2] +...+ x[srcBLen] * y[0] |
| * .... |
| * sum = x[srcALen-srcBLen-2] * y[srcBLen-1] + x[srcALen] * y[srcBLen-2] +...+ x[srcALen-1] * y[0] |
| */ |
| |
| /* Working pointer of inputA */ |
| px = pIn1; |
| |
| /* Working pointer of inputB */ |
| pSrc2 = pIn2 + (srcBLen - 1U); |
| py = pSrc2; |
| |
| /* count is index by which the pointer pIn1 to be incremented */ |
| count = 0U; |
| |
| /* ------------------- |
| * Stage2 process |
| * ------------------*/ |
| |
| /* Stage2 depends on srcBLen as in this stage srcBLen number of MACS are performed. |
| * So, to loop unroll over blockSize2, |
| * srcBLen should be greater than or equal to 4 */ |
| if (srcBLen >= 4U) |
| { |
| |
| #if defined(ARM_MATH_NEON) |
| float32x4_t c; |
| float32x4_t x1v; |
| float32x4_t x2v; |
| uint32x4_t x1v_u; |
| uint32x4_t x2v_u; |
| uint32x4_t x_u; |
| float32x4_t x; |
| float32x4_t res = vdupq_n_f32(0) ; |
| #endif /* #if defined(ARM_MATH_NEON) */ |
| |
| #if defined (ARM_MATH_LOOPUNROLL) || defined(ARM_MATH_NEON) |
| |
| /* Loop unrolling: Compute 4 outputs at a time */ |
| blkCnt = blockSize2 >> 2U; |
| |
| while (blkCnt > 0U) |
| { |
| /* Set all accumulators to zero */ |
| acc0 = 0.0f; |
| acc1 = 0.0f; |
| acc2 = 0.0f; |
| acc3 = 0.0f; |
| |
| /* Apply loop unrolling and compute 4 MACs simultaneously. */ |
| k = srcBLen >> 2U; |
| |
| #if defined(ARM_MATH_NEON) |
| res = vdupq_n_f32(0) ; |
| |
| x1v = vld1q_f32(px); |
| x2v = vld1q_f32(px+4); |
| |
| do |
| { |
| c = vld1q_f32(py-3); |
| |
| px += 4; |
| x = x1v; |
| res = vmlaq_n_f32(res,x,c[3]); |
| |
| x = vextq_f32(x1v,x2v,1); |
| |
| res = vmlaq_n_f32(res,x,c[2]); |
| |
| x = vextq_f32(x1v,x2v,2); |
| |
| res = vmlaq_n_f32(res,x,c[1]); |
| |
| x = vextq_f32(x1v,x2v,3); |
| |
| res = vmlaq_n_f32(res,x,c[0]); |
| |
| py -= 4; |
| |
| x1v = x2v ; |
| x2v = vld1q_f32(px+4); |
| |
| } while (--k); |
| |
| |
| /* If the srcBLen is not a multiple of 4, compute any remaining MACs here. |
| ** No loop unrolling is used. */ |
| k = srcBLen & 0x3; |
| |
| x1v = vld1q_f32(px); |
| px += 4; |
| |
| while (k > 0U) |
| { |
| /* Read y[srcBLen - 5] sample */ |
| c0 = *(py--); |
| |
| res = vmlaq_n_f32(res,x1v,c0); |
| |
| /* Reuse the present samples for the next MAC */ |
| x1v[0] = x1v[1]; |
| x1v[1] = x1v[2]; |
| x1v[2] = x1v[3]; |
| |
| x1v[3] = *(px++); |
| |
| /* Decrement the loop counter */ |
| k--; |
| } |
| |
| acc0 = res[0]; |
| acc1 = res[1]; |
| acc2 = res[2]; |
| acc3 = res[3]; |
| |
| #else |
| /* read x[0], x[1], x[2] samples */ |
| x0 = *px++; |
| x1 = *px++; |
| x2 = *px++; |
| |
| /* First part of the processing with loop unrolling. Compute 4 MACs at a time. |
| ** a second loop below computes MACs for the remaining 1 to 3 samples. */ |
| do |
| { |
| /* Read y[srcBLen - 1] sample */ |
| c0 = *py--; |
| /* Read x[3] sample */ |
| x3 = *(px); |
| |
| /* Perform the multiply-accumulate */ |
| /* acc0 += x[0] * y[srcBLen - 1] */ |
| acc0 += x0 * c0; |
| /* acc1 += x[1] * y[srcBLen - 1] */ |
| acc1 += x1 * c0; |
| /* acc2 += x[2] * y[srcBLen - 1] */ |
| acc2 += x2 * c0; |
| /* acc3 += x[3] * y[srcBLen - 1] */ |
| acc3 += x3 * c0; |
| |
| /* Read y[srcBLen - 2] sample */ |
| c0 = *py--; |
| /* Read x[4] sample */ |
| x0 = *(px + 1U); |
| |
| /* Perform the multiply-accumulate */ |
| /* acc0 += x[1] * y[srcBLen - 2] */ |
| acc0 += x1 * c0; |
| /* acc1 += x[2] * y[srcBLen - 2] */ |
| acc1 += x2 * c0; |
| /* acc2 += x[3] * y[srcBLen - 2] */ |
| acc2 += x3 * c0; |
| /* acc3 += x[4] * y[srcBLen - 2] */ |
| acc3 += x0 * c0; |
| |
| /* Read y[srcBLen - 3] sample */ |
| c0 = *py--; |
| /* Read x[5] sample */ |
| x1 = *(px + 2U); |
| |
| /* Perform the multiply-accumulate */ |
| /* acc0 += x[2] * y[srcBLen - 3] */ |
| acc0 += x2 * c0; |
| /* acc1 += x[3] * y[srcBLen - 2] */ |
| acc1 += x3 * c0; |
| /* acc2 += x[4] * y[srcBLen - 2] */ |
| acc2 += x0 * c0; |
| /* acc3 += x[5] * y[srcBLen - 2] */ |
| acc3 += x1 * c0; |
| |
| /* Read y[srcBLen - 4] sample */ |
| c0 = *py--; |
| /* Read x[6] sample */ |
| x2 = *(px + 3U); |
| px += 4U; |
| |
| /* Perform the multiply-accumulate */ |
| /* acc0 += x[3] * y[srcBLen - 4] */ |
| acc0 += x3 * c0; |
| /* acc1 += x[4] * y[srcBLen - 4] */ |
| acc1 += x0 * c0; |
| /* acc2 += x[5] * y[srcBLen - 4] */ |
| acc2 += x1 * c0; |
| /* acc3 += x[6] * y[srcBLen - 4] */ |
| acc3 += x2 * c0; |
| |
| } while (--k); |
| |
| /* If the srcBLen is not a multiple of 4, compute any remaining MACs here. |
| ** No loop unrolling is used. */ |
| k = srcBLen % 0x4U; |
| |
| while (k > 0U) |
| { |
| /* Read y[srcBLen - 5] sample */ |
| c0 = *py--; |
| /* Read x[7] sample */ |
| x3 = *px++; |
| |
| /* Perform the multiply-accumulate */ |
| /* acc0 += x[4] * y[srcBLen - 5] */ |
| acc0 += x0 * c0; |
| /* acc1 += x[5] * y[srcBLen - 5] */ |
| acc1 += x1 * c0; |
| /* acc2 += x[6] * y[srcBLen - 5] */ |
| acc2 += x2 * c0; |
| /* acc3 += x[7] * y[srcBLen - 5] */ |
| acc3 += x3 * c0; |
| |
| /* Reuse the present samples for the next MAC */ |
| x0 = x1; |
| x1 = x2; |
| x2 = x3; |
| |
| /* Decrement the loop counter */ |
| k--; |
| } |
| #endif /* #if defined(ARM_MATH_NEON) */ |
| |
| /* Store the result in the accumulator in the destination buffer. */ |
| *pOut++ = acc0; |
| *pOut++ = acc1; |
| *pOut++ = acc2; |
| *pOut++ = acc3; |
| |
| /* Increment the pointer pIn1 index, count by 4 */ |
| count += 4U; |
| |
| /* Update the inputA and inputB pointers for next MAC calculation */ |
| px = pIn1 + count; |
| py = pSrc2; |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| |
| /* If the blockSize2 is not a multiple of 4, compute any remaining output samples here. |
| ** No loop unrolling is used. */ |
| blkCnt = blockSize2 % 0x4U; |
| |
| #else |
| |
| /* Initialize blkCnt with number of samples */ |
| blkCnt = blockSize2; |
| |
| #endif /* #if defined (ARM_MATH_LOOPUNROLL) || defined (ARM_MATH_NEON)*/ |
| |
| while (blkCnt > 0U) |
| { |
| /* Accumulator is made zero for every iteration */ |
| sum = 0.0f; |
| |
| #if defined(ARM_MATH_NEON) || defined (ARM_MATH_LOOPUNROLL) |
| /* Loop unrolling: Compute 4 outputs at a time */ |
| k = srcBLen >> 2U; |
| |
| #if defined (ARM_MATH_NEON) |
| float32x4_t res = vdupq_n_f32(0) ; |
| float32x4_t x = vdupq_n_f32(0) ; |
| float32x4_t y = vdupq_n_f32(0) ; |
| float32x2_t accum = vdup_n_f32(0) ; |
| |
| /* First part of the processing. Compute 4 MACs at a time. |
| ** a second loop below computes MACs for the remaining 1 to 3 samples. */ |
| while (k > 0U) |
| { |
| x = vld1q_f32(px); |
| y = vld1q_f32(py-3); |
| |
| y = vrev64q_f32(y); |
| y = vcombine_f32(vget_high_f32(y), vget_low_f32(y)); |
| |
| res = vmlaq_f32(res,x,y); |
| |
| px += 4 ; |
| py -= 4 ; |
| |
| /* Decrement the loop counter */ |
| k--; |
| } |
| |
| accum = vpadd_f32(vget_low_f32(res), vget_high_f32(res)); |
| sum += accum[0] + accum[1]; |
| |
| /* If the srcBLen is not a multiple of 4, compute any remaining MACs here. |
| ** No loop unrolling is used. */ |
| k = srcBLen & 0x3U; |
| |
| #else |
| while (k > 0U) |
| { |
| /* Perform the multiply-accumulate */ |
| sum += *px++ * *py--; |
| sum += *px++ * *py--; |
| sum += *px++ * *py--; |
| sum += *px++ * *py--; |
| |
| /* Decrement loop counter */ |
| k--; |
| } |
| |
| /* Loop unrolling: Compute remaining outputs */ |
| k = srcBLen % 0x4U; |
| |
| #endif /* if defined (ARM_MATH_NEON) */ |
| #else |
| /* Initialize blkCnt with number of samples */ |
| k = srcBLen; |
| |
| #endif /* #if defined(ARM_MATH_NEON) || defined (ARM_MATH_LOOPUNROLL) */ |
| |
| while (k > 0U) |
| { |
| /* Perform the multiply-accumulate */ |
| sum += *px++ * *py--; |
| |
| /* Decrement the loop counter */ |
| k--; |
| } |
| |
| /* Store the result in the accumulator in the destination buffer. */ |
| *pOut++ = sum; |
| |
| /* Increment the MAC count */ |
| count++; |
| |
| /* Update the inputA and inputB pointers for next MAC calculation */ |
| px = pIn1 + count; |
| py = pSrc2; |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| } |
| else |
| { |
| /* If the srcBLen is not a multiple of 4, |
| * the blockSize2 loop cannot be unrolled by 4 */ |
| blkCnt = blockSize2; |
| |
| while (blkCnt > 0U) |
| { |
| /* Accumulator is made zero for every iteration */ |
| sum = 0.0f; |
| |
| /* srcBLen number of MACS should be performed */ |
| k = srcBLen; |
| |
| while (k > 0U) |
| { |
| /* Perform the multiply-accumulate */ |
| sum += *px++ * *py--; |
| |
| /* Decrement the loop counter */ |
| k--; |
| } |
| |
| /* Store the result in the accumulator in the destination buffer. */ |
| *pOut++ = sum; |
| |
| /* Increment the MAC count */ |
| count++; |
| |
| /* Update the inputA and inputB pointers for next MAC calculation */ |
| px = pIn1 + count; |
| py = pSrc2; |
| |
| /* Decrement the loop counter */ |
| blkCnt--; |
| } |
| } |
| |
| |
| /* -------------------------- |
| * Initializations of stage3 |
| * -------------------------*/ |
| |
| /* sum += x[srcALen-srcBLen+1] * y[srcBLen-1] + x[srcALen-srcBLen+2] * y[srcBLen-2] +...+ x[srcALen-1] * y[1] |
| * sum += x[srcALen-srcBLen+2] * y[srcBLen-1] + x[srcALen-srcBLen+3] * y[srcBLen-2] +...+ x[srcALen-1] * y[2] |
| * .... |
| * sum += x[srcALen-2] * y[srcBLen-1] + x[srcALen-1] * y[srcBLen-2] |
| * sum += x[srcALen-1] * y[srcBLen-1] |
| */ |
| |
| /* In this stage the MAC operations are decreased by 1 for every iteration. |
| The blockSize3 variable holds the number of MAC operations performed */ |
| |
| /* Working pointer of inputA */ |
| pSrc1 = pIn1 + (srcALen - (srcBLen - 1U)); |
| px = pSrc1; |
| |
| /* Working pointer of inputB */ |
| pSrc2 = pIn2 + (srcBLen - 1U); |
| py = pSrc2; |
| |
| /* ------------------- |
| * Stage3 process |
| * ------------------*/ |
| while (blockSize3 > 0U) |
| { |
| /* Accumulator is made zero for every iteration */ |
| sum = 0.0f; |
| |
| #if defined (ARM_MATH_LOOPUNROLL) || defined(ARM_MATH_NEON) |
| /* Loop unrolling: Compute 4 outputs at a time */ |
| k = blockSize3 >> 2U; |
| |
| #if defined(ARM_MATH_NEON) |
| float32x4_t res = vdupq_n_f32(0) ; |
| float32x4_t x = vdupq_n_f32(0) ; |
| float32x4_t y = vdupq_n_f32(0) ; |
| float32x2_t accum = vdup_n_f32(0) ; |
| |
| while (k > 0U) |
| { |
| x = vld1q_f32(px); |
| y = vld1q_f32(py-3); |
| |
| y = vrev64q_f32(y); |
| y = vcombine_f32(vget_high_f32(y), vget_low_f32(y)); |
| |
| res = vmlaq_f32(res,x,y); |
| |
| px += 4 ; |
| py -= 4 ; |
| |
| /* Decrement the loop counter */ |
| k--; |
| } |
| |
| accum = vpadd_f32(vget_low_f32(res), vget_high_f32(res)); |
| sum += accum[0] + accum[1]; |
| |
| #else |
| while (k > 0U) |
| { |
| /* Perform the multiply-accumulate */ |
| /* sum += x[srcALen - srcBLen + 1] * y[srcBLen - 1] */ |
| sum += *px++ * *py--; |
| |
| /* sum += x[srcALen - srcBLen + 2] * y[srcBLen - 2] */ |
| sum += *px++ * *py--; |
| |
| /* sum += x[srcALen - srcBLen + 3] * y[srcBLen - 3] */ |
| sum += *px++ * *py--; |
| |
| /* sum += x[srcALen - srcBLen + 4] * y[srcBLen - 4] */ |
| sum += *px++ * *py--; |
| |
| /* Decrement loop counter */ |
| k--; |
| } |
| #endif /* #if defined (ARM_MATH_NEON) */ |
| |
| /* Loop unrolling: Compute remaining outputs */ |
| k = blockSize3 % 0x4U; |
| #else |
| |
| /* Initialize blkCnt with number of samples */ |
| k = blockSize3; |
| |
| #endif /* #if defined (ARM_MATH_NEON) || defined (ARM_MATH_LOOPUNROLL)*/ |
| |
| while (k > 0U) |
| { |
| /* Perform the multiply-accumulate */ |
| /* sum += x[srcALen-1] * y[srcBLen-1] */ |
| sum += *px++ * *py--; |
| |
| /* Decrement loop counter */ |
| k--; |
| } |
| |
| /* Store the result in the accumulator in the destination buffer. */ |
| *pOut++ = sum; |
| |
| /* Update the inputA and inputB pointers for next MAC calculation */ |
| px = ++pSrc1; |
| py = pSrc2; |
| |
| /* Decrement the loop counter */ |
| blockSize3--; |
| } |
| |
| #else |
| /* alternate version for CM0_FAMILY */ |
| |
| const float32_t *pIn1 = pSrcA; /* InputA pointer */ |
| const float32_t *pIn2 = pSrcB; /* InputB pointer */ |
| float32_t sum; /* Accumulator */ |
| uint32_t i, j; /* Loop counters */ |
| |
| /* Loop to calculate convolution for output length number of times */ |
| for (i = 0U; i < (srcALen + srcBLen - 1U); i++) |
| { |
| /* Initialize sum with zero to carry out MAC operations */ |
| sum = 0.0f; |
| |
| /* Loop to perform MAC operations according to convolution equation */ |
| for (j = 0U; j <= i; j++) |
| { |
| /* Check the array limitations */ |
| if (((i - j) < srcBLen) && (j < srcALen)) |
| { |
| /* z[i] += x[i-j] * y[j] */ |
| sum += ( pIn1[j] * pIn2[i - j]); |
| } |
| } |
| |
| /* Store the output in the destination buffer */ |
| pDst[i] = sum; |
| } |
| |
| #endif /* #if !defined(ARM_MATH_CM0_FAMILY) */ |
| |
| } |
| |
| /** |
| @} end of Conv group |
| */ |