| /** |
| ****************************************************************************** |
| * @file stm32f0xx.h |
| * @author MCD Application Team |
| * @brief CMSIS STM32F0xx Device Peripheral Access Layer Header File. |
| * |
| * The file is the unique include file that the application programmer |
| * is using in the C source code, usually in main.c. This file contains: |
| * - Configuration section that allows to select: |
| * - The STM32F0xx device used in the target application |
| * - To use or not the peripherals drivers in application code(i.e. |
| * code will be based on direct access to peripherals registers |
| * rather than drivers API), this option is controlled by |
| * "#define USE_HAL_DRIVER" |
| * |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2016 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /** @addtogroup CMSIS |
| * @{ |
| */ |
| |
| /** @addtogroup stm32f0xx |
| * @{ |
| */ |
| |
| #ifndef __STM32F0xx_H |
| #define __STM32F0xx_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif /* __cplusplus */ |
| |
| /** @addtogroup Library_configuration_section |
| * @{ |
| */ |
| |
| /** |
| * @brief STM32 Family |
| */ |
| #if !defined (STM32F0) |
| #define STM32F0 |
| #endif /* STM32F0 */ |
| |
| /** Uncomment the line below according to the target STM32 device used in your application. |
| * stm32f0xxxx.h file contains: |
| * - All the peripheral register's definitions, bits definitions and memory mapping for STM32F0xxxx devices |
| * - IRQ channel definition |
| * - Peripheral memory mapping and physical registers address definition |
| * - Peripheral pointer declaration and driver header file inclusion |
| * - Product miscellaneous configuration: assert macros
|
| * Note: These CMSIS drivers (stm32f0xxxx.h) are always supporting features of the sub-familys superset. |
| */ |
| |
| #if !defined (STM32F030x6) && !defined (STM32F030x8) && \ |
| !defined (STM32F031x6) && !defined (STM32F038xx) && \ |
| !defined (STM32F042x6) && !defined (STM32F048xx) && !defined (STM32F070x6) && \ |
| !defined (STM32F051x8) && !defined (STM32F058xx) && \ |
| !defined (STM32F071xB) && !defined (STM32F072xB) && !defined (STM32F078xx) && !defined (STM32F070xB) && \ |
| !defined (STM32F091xC) && !defined (STM32F098xx) && !defined (STM32F030xC) |
| /* #define STM32F030x6 */ /*!< STM32F030x4, STM32F030x6 Devices (STM32F030xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ |
| /* #define STM32F030x8 */ /*!< STM32F030x8 Devices (STM32F030xx microcontrollers where the Flash memory is 64 Kbytes) */ |
| /* #define STM32F031x6 */ /*!< STM32F031x4, STM32F031x6 Devices (STM32F031xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ |
| /* #define STM32F038xx */ /*!< STM32F038xx Devices (STM32F038xx microcontrollers where the Flash memory is 32 Kbytes) */ |
| /* #define STM32F042x6 */ /*!< STM32F042x4, STM32F042x6 Devices (STM32F042xx microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ |
| /* #define STM32F048xx */ /*!< STM32F048xx Devices (STM32F048xx microcontrollers where the Flash memory is 32 Kbytes) */ |
| /* #define STM32F051x8 */ /*!< STM32F051x4, STM32F051x6, STM32F051x8 Devices (STM32F051xx microcontrollers where the Flash memory ranges between 16 and 64 Kbytes) */ |
| /* #define STM32F058xx */ /*!< STM32F058xx Devices (STM32F058xx microcontrollers where the Flash memory is 64 Kbytes) */ |
| /* #define STM32F070x6 */ /*!< STM32F070x6 Devices (STM32F070x6 microcontrollers where the Flash memory ranges between 16 and 32 Kbytes) */ |
| /* #define STM32F070xB */ /*!< STM32F070xB Devices (STM32F070xB microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */ |
| /* #define STM32F071xB */ /*!< STM32F071x8, STM32F071xB Devices (STM32F071xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */ |
| /* #define STM32F072xB */ /*!< STM32F072x8, STM32F072xB Devices (STM32F072xx microcontrollers where the Flash memory ranges between 64 and 128 Kbytes) */ |
| /* #define STM32F078xx */ /*!< STM32F078xx Devices (STM32F078xx microcontrollers where the Flash memory is 128 Kbytes) */ |
| /* #define STM32F030xC */ /*!< STM32F030xC Devices (STM32F030xC microcontrollers where the Flash memory is 256 Kbytes) */ |
| /* #define STM32F091xC */ /*!< STM32F091xB, STM32F091xC Devices (STM32F091xx microcontrollers where the Flash memory ranges between 128 and 256 Kbytes) */ |
| /* #define STM32F098xx */ /*!< STM32F098xx Devices (STM32F098xx microcontrollers where the Flash memory is 256 Kbytes) */ |
| #endif |
| /* Legacy aliases */ |
| #if defined (STM32F048x6) |
| #define STM32F048xx |
| #endif /* STM32F048x6 */ |
| |
| /* Tip: To avoid modifying this file each time you need to switch between these |
| devices, you can define the device in your toolchain compiler preprocessor. |
| */ |
| #if !defined (USE_HAL_DRIVER) |
| /** |
| * @brief Comment the line below if you will not use the peripherals drivers. |
| In this case, these drivers will not be included and the application code will |
| be based on direct access to peripherals registers |
| */ |
| /*#define USE_HAL_DRIVER */ |
| #endif /* USE_HAL_DRIVER */ |
| |
| /** |
| * @brief CMSIS Device version number V2.3.5 |
| */ |
| #define __STM32F0_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */ |
| #define __STM32F0_DEVICE_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */ |
| #define __STM32F0_DEVICE_VERSION_SUB2 (0x05) /*!< [15:8] sub2 version */ |
| #define __STM32F0_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */ |
| #define __STM32F0_DEVICE_VERSION ((__STM32F0_DEVICE_VERSION_MAIN << 24)\ |
| |(__STM32F0_DEVICE_VERSION_SUB1 << 16)\ |
| |(__STM32F0_DEVICE_VERSION_SUB2 << 8 )\ |
| |(__STM32F0_DEVICE_VERSION_RC)) |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup Device_Included |
| * @{ |
| */ |
| |
| #if defined(STM32F030x6) |
| #include "stm32f030x6.h" |
| #elif defined(STM32F030x8) |
| #include "stm32f030x8.h" |
| #elif defined(STM32F031x6) |
| #include "stm32f031x6.h" |
| #elif defined(STM32F038xx) |
| #include "stm32f038xx.h" |
| #elif defined(STM32F042x6) |
| #include "stm32f042x6.h" |
| #elif defined(STM32F048xx) |
| #include "stm32f048xx.h" |
| #elif defined(STM32F051x8) |
| #include "stm32f051x8.h" |
| #elif defined(STM32F058xx) |
| #include "stm32f058xx.h" |
| #elif defined(STM32F070x6) |
| #include "stm32f070x6.h" |
| #elif defined(STM32F070xB) |
| #include "stm32f070xb.h" |
| #elif defined(STM32F071xB) |
| #include "stm32f071xb.h" |
| #elif defined(STM32F072xB) |
| #include "stm32f072xb.h" |
| #elif defined(STM32F078xx) |
| #include "stm32f078xx.h" |
| #elif defined(STM32F091xC) |
| #include "stm32f091xc.h" |
| #elif defined(STM32F098xx) |
| #include "stm32f098xx.h" |
| #elif defined(STM32F030xC) |
| #include "stm32f030xc.h" |
| #else |
| #error "Please select first the target STM32F0xx device used in your application (in stm32f0xx.h file)" |
| #endif |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup Exported_types |
| * @{ |
| */ |
| typedef enum |
| { |
| RESET = 0U, |
| SET = !RESET |
| } FlagStatus, ITStatus; |
| |
| typedef enum |
| { |
| DISABLE = 0U, |
| ENABLE = !DISABLE |
| } FunctionalState; |
| #define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) |
| |
| typedef enum |
| { |
| SUCCESS = 0U, |
| ERROR = !SUCCESS |
| } ErrorStatus; |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** @addtogroup Exported_macros |
| * @{ |
| */ |
| #define SET_BIT(REG, BIT) ((REG) |= (BIT)) |
| |
| #define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) |
| |
| #define READ_BIT(REG, BIT) ((REG) & (BIT)) |
| |
| #define CLEAR_REG(REG) ((REG) = (0x0)) |
| |
| #define WRITE_REG(REG, VAL) ((REG) = (VAL)) |
| |
| #define READ_REG(REG) ((REG)) |
| |
| #define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) |
| |
| |
| /** |
| * @} |
| */ |
| |
| #if defined (USE_HAL_DRIVER) |
| #include "stm32f0xx_hal.h" |
| #endif /* USE_HAL_DRIVER */ |
| |
| |
| #ifdef __cplusplus |
| } |
| #endif /* __cplusplus */ |
| |
| #endif /* __STM32F0xx_H */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
