| /** |
| ****************************************************************************** |
| * @file stm32f3xx.h |
| * @author MCD Application Team |
| * @brief CMSIS STM32F3xx Device Peripheral Access Layer Header File. |
| * |
| * The file is the unique include file that the application programmer |
| * is using in the C source code, usually in main.c. This file contains: |
| * - Configuration section that allows to select: |
| * - The STM32F3xx device used in the target application |
| * - To use or not the peripheral's drivers in application code(i.e. |
| * code will be based on direct access to peripheral's registers |
| * rather than drivers API), this option is controlled by |
| * "#define USE_HAL_DRIVER" |
| * |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2016 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| /** @addtogroup CMSIS |
| * @{ |
| */ |
| |
| /** @addtogroup stm32f3xx |
| * @{ |
| */ |
| |
| #ifndef __STM32F3xx_H |
| #define __STM32F3xx_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif /* __cplusplus */ |
| |
| /** @addtogroup Library_configuration_section |
| * @{ |
| */ |
| |
| /** |
| * @brief STM32 Family |
| */ |
| #if !defined (STM32F3) |
| #define STM32F3 |
| #endif /* STM32F3 */ |
| |
| /* Uncomment the line below according to the target STM32 device used in your |
| application |
| */ |
| |
| #if !defined (STM32F301x8) && !defined (STM32F302x8) && !defined (STM32F318xx) && \ |
| !defined (STM32F302xC) && !defined (STM32F303xC) && !defined (STM32F358xx) && \ |
| !defined (STM32F303x8) && !defined (STM32F334x8) && !defined (STM32F328xx) && \ |
| !defined (STM32F302xE) && !defined (STM32F303xE) && !defined (STM32F398xx) && \ |
| !defined (STM32F373xC) && !defined (STM32F378xx) |
| |
| /* #define STM32F301x8 */ /*!< STM32F301K6, STM32F301K8, STM32F301C6, STM32F301C8, |
| STM32F301R6 and STM32F301R8 Devices */ |
| /* #define STM32F302x8 */ /*!< STM32F302K6, STM32F302K8, STM32F302C6, STM32F302C8, |
| STM32F302R6 and STM32F302R8 Devices */ |
| /* #define STM32F302xC */ /*!< STM32F302CB, STM32F302CC, STM32F302RB, STM32F302RC, |
| STM32F302VB and STM32F302VC Devices */ |
| /* #define STM32F302xE */ /*!< STM32F302RE, STM32F302VE, STM32F302ZE, STM32F302RD, |
| STM32F302VD and STM32F302ZD Devices */ |
| /* #define STM32F303x8 */ /*!< STM32F303K6, STM32F303K8, STM32F303C6, STM32F303C8, |
| STM32F303R6 and STM32F303R8 Devices */ |
| /* #define STM32F303xC */ /*!< STM32F303CB, STM32F303CC, STM32F303RB, STM32F303RC, |
| STM32F303VB and STM32F303VC Devices */ |
| /* #define STM32F303xE */ /*!< STM32F303RE, STM32F303VE, STM32F303ZE, STM32F303RD, |
| STM32F303VD and STM32F303ZD Devices */ |
| /* #define STM32F373xC */ /*!< STM32F373C8, STM32F373CB, STM32F373CC, |
| STM32F373R8, STM32F373RB, STM32F373RC, |
| STM32F373V8, STM32F373VB and STM32F373VC Devices */ |
| /* #define STM32F334x8 */ /*!< STM32F334K4, STM32F334K6, STM32F334K8, |
| STM32F334C4, STM32F334C6, STM32F334C8, |
| STM32F334R4, STM32F334R6 and STM32F334R8 Devices */ |
| /* #define STM32F318xx */ /*!< STM32F318K8, STM32F318C8: STM32F301x8 with regulator off: STM32F318xx Devices */ |
| /* #define STM32F328xx */ /*!< STM32F328C8, STM32F328R8: STM32F334x8 with regulator off: STM32F328xx Devices */ |
| /* #define STM32F358xx */ /*!< STM32F358CC, STM32F358RC, STM32F358VC: STM32F303xC with regulator off: STM32F358xx Devices */ |
| /* #define STM32F378xx */ /*!< STM32F378CC, STM32F378RC, STM32F378VC: STM32F373xC with regulator off: STM32F378xx Devices */ |
| /* #define STM32F398xx */ /*!< STM32F398VE: STM32F303xE with regulator off: STM32F398xx Devices */ |
| #endif |
| |
| /* Tip: To avoid modifying this file each time you need to switch between these |
| devices, you can define the device in your toolchain compiler preprocessor. |
| */ |
| #if !defined (USE_HAL_DRIVER) |
| /** |
| * @brief Comment the line below if you will not use the peripherals drivers. |
| In this case, these drivers will not be included and the application code will |
| be based on direct access to peripherals registers |
| */ |
| /*#define USE_HAL_DRIVER */ |
| #endif /* USE_HAL_DRIVER */ |
| |
| /** |
| * @brief CMSIS Device version number V2.3.8 |
| */ |
| #define __STM32F3_CMSIS_VERSION_MAIN (0x02) /*!< [31:24] main version */ |
| #define __STM32F3_CMSIS_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */ |
| #define __STM32F3_CMSIS_VERSION_SUB2 (0x08) /*!< [15:8] sub2 version */ |
| #define __STM32F3_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */ |
| #define __STM32F3_CMSIS_VERSION ((__STM32F3_CMSIS_VERSION_MAIN << 24)\ |
| |(__STM32F3_CMSIS_VERSION_SUB1 << 16)\ |
| |(__STM32F3_CMSIS_VERSION_SUB2 << 8 )\ |
| |(__STM32F3_CMSIS_VERSION_RC)) |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup Device_Included |
| * @{ |
| */ |
| |
| #if defined(STM32F301x8) |
| #include "stm32f301x8.h" |
| #elif defined(STM32F302x8) |
| #include "stm32f302x8.h" |
| #elif defined(STM32F302xC) |
| #include "stm32f302xc.h" |
| #elif defined(STM32F302xE) |
| #include "stm32f302xe.h" |
| #elif defined(STM32F303x8) |
| #include "stm32f303x8.h" |
| #elif defined(STM32F303xC) |
| #include "stm32f303xc.h" |
| #elif defined(STM32F303xE) |
| #include "stm32f303xe.h" |
| #elif defined(STM32F373xC) |
| #include "stm32f373xc.h" |
| #elif defined(STM32F334x8) |
| #include "stm32f334x8.h" |
| #elif defined(STM32F318xx) |
| #include "stm32f318xx.h" |
| #elif defined(STM32F328xx) |
| #include "stm32f328xx.h" |
| #elif defined(STM32F358xx) |
| #include "stm32f358xx.h" |
| #elif defined(STM32F378xx) |
| #include "stm32f378xx.h" |
| #elif defined(STM32F398xx) |
| #include "stm32f398xx.h" |
| #else |
| #error "Please select first the target STM32F3xx device used in your application (in stm32f3xx.h file)" |
| #endif |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup Exported_types |
| * @{ |
| */ |
| typedef enum |
| { |
| RESET = 0U, |
| SET = !RESET |
| } FlagStatus, ITStatus; |
| |
| typedef enum |
| { |
| DISABLE = 0U, |
| ENABLE = !DISABLE |
| } FunctionalState; |
| #define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE)) |
| |
| typedef enum |
| { |
| SUCCESS = 0U, |
| ERROR = !SUCCESS |
| } ErrorStatus; |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** @addtogroup Exported_macros |
| * @{ |
| */ |
| #define SET_BIT(REG, BIT) ((REG) |= (BIT)) |
| |
| #define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT)) |
| |
| #define READ_BIT(REG, BIT) ((REG) & (BIT)) |
| |
| #define CLEAR_REG(REG) ((REG) = (0x0)) |
| |
| #define WRITE_REG(REG, VAL) ((REG) = (VAL)) |
| |
| #define READ_REG(REG) ((REG)) |
| |
| #define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK))) |
| |
| #define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL))) |
| |
| /* Use of CMSIS compiler intrinsics for register exclusive access */ |
| /* Atomic 32-bit register access macro to set one or several bits */ |
| #define ATOMIC_SET_BIT(REG, BIT) \ |
| do { \ |
| uint32_t val; \ |
| do { \ |
| val = __LDREXW((__IO uint32_t *)&(REG)) | (BIT); \ |
| } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \ |
| } while(0) |
| |
| /* Atomic 32-bit register access macro to clear one or several bits */ |
| #define ATOMIC_CLEAR_BIT(REG, BIT) \ |
| do { \ |
| uint32_t val; \ |
| do { \ |
| val = __LDREXW((__IO uint32_t *)&(REG)) & ~(BIT); \ |
| } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \ |
| } while(0) |
| |
| /* Atomic 32-bit register access macro to clear and set one or several bits */ |
| #define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) \ |
| do { \ |
| uint32_t val; \ |
| do { \ |
| val = (__LDREXW((__IO uint32_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \ |
| } while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \ |
| } while(0) |
| |
| /* Atomic 16-bit register access macro to set one or several bits */ |
| #define ATOMIC_SETH_BIT(REG, BIT) \ |
| do { \ |
| uint16_t val; \ |
| do { \ |
| val = __LDREXH((__IO uint16_t *)&(REG)) | (BIT); \ |
| } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \ |
| } while(0) |
| |
| /* Atomic 16-bit register access macro to clear one or several bits */ |
| #define ATOMIC_CLEARH_BIT(REG, BIT) \ |
| do { \ |
| uint16_t val; \ |
| do { \ |
| val = __LDREXH((__IO uint16_t *)&(REG)) & ~(BIT); \ |
| } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \ |
| } while(0) |
| |
| /* Atomic 16-bit register access macro to clear and set one or several bits */ |
| #define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK) \ |
| do { \ |
| uint16_t val; \ |
| do { \ |
| val = (__LDREXH((__IO uint16_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \ |
| } while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \ |
| } while(0) |
| |
| /** |
| * @} |
| */ |
| |
| #if defined (USE_HAL_DRIVER) |
| #include "stm32f3xx_hal.h" |
| #endif /* USE_HAL_DRIVER */ |
| |
| #ifdef __cplusplus |
| } |
| #endif /* __cplusplus */ |
| |
| #endif /* __STM32F3xx_H */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
