| /** |
| ****************************************************************************** |
| * @file system_stm32l5xx_ns.c |
| * @author MCD Application Team |
| * @brief CMSIS Cortex-M33 Device Peripheral Access Layer System Source File |
| * to be used in non-secure application when the system implements |
| * the TrustZone-M security. |
| * |
| * This file provides two functions and one global variable to be called from |
| * user application: |
| * - SystemInit(): This function is called at non-secure startup before |
| * branch to non-secure main program. |
| * This call is made inside the "startup_stm32l5xx.s" file. |
| * |
| * - SystemCoreClock variable: Contains the core clock (HCLK), it can be used |
| * by the user application to setup the SysTick |
| * timer or configure other parameters. |
| * |
| * - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must |
| * be called whenever the core clock is changed |
| * during program execution. |
| * |
| * After each device reset the MSI (4 MHz) is used as system clock source. |
| * Then SystemInit() function is called, in "startup_stm32l5xx.s" file, to |
| * configure the system clock before to branch to main secure program. |
| * Later, when non-secure SystemInit() function is called, in "startup_stm32l5xx.s" |
| * file, the system clock may have been updated from reset value by the main |
| * secure program. |
| * |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2019 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under Apache License, Version 2.0, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/Apache-2.0 |
| * |
| ****************************************************************************** |
| */ |
| |
| /** @addtogroup CMSIS |
| * @{ |
| */ |
| |
| /** @addtogroup STM32L5xx_System |
| * @{ |
| */ |
| |
| /** @addtogroup STM32L5xx_System_Private_Includes |
| * @{ |
| */ |
| |
| #include "stm32l5xx.h" |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup STM32L5xx_System_Private_TypesDefinitions |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup STM32L5xx_System_Private_Defines |
| * @{ |
| */ |
| |
| #if !defined (HSE_VALUE) |
| #define HSE_VALUE 16000000U /*!< Value of the External oscillator in Hz */ |
| #endif /* HSE_VALUE */ |
| |
| #if !defined (MSI_VALUE) |
| #define MSI_VALUE 4000000U /*!< Value of the Internal oscillator in Hz*/ |
| #endif /* MSI_VALUE */ |
| |
| #if !defined (HSI_VALUE) |
| #define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz*/ |
| #endif /* HSI_VALUE */ |
| |
| /* Note: Following vector table addresses must be defined in line with linker |
| configuration. */ |
| /*!< Uncomment the following line if you need to relocate the vector table |
| anywhere in Flash or Sram, else the vector table is kept at the automatic |
| remap of boot address selected */ |
| /* #define USER_VECT_TAB_ADDRESS */ |
| |
| #if defined(USER_VECT_TAB_ADDRESS) |
| /*!< Uncomment the following line if you need to relocate your vector Table |
| in Sram else user remap will be done in Flash. */ |
| /* #define VECT_TAB_SRAM */ |
| |
| #if defined(VECT_TAB_SRAM) |
| #define VECT_TAB_BASE_ADDRESS SRAM1_BASE_NS /*!< Vector Table base address field. |
| This value must be a multiple of 0x200. */ |
| #define VECT_TAB_OFFSET 0x00018000U /*!< Vector Table base offset field. |
| This value must be a multiple of 0x200. */ |
| #else |
| #define VECT_TAB_BASE_ADDRESS FLASH_BASE_NS /*!< Vector Table base address field. |
| This value must be a multiple of 0x200. */ |
| #define VECT_TAB_OFFSET 0x00040000U /*!< Vector Table base offset field. |
| This value must be a multiple of 0x200. */ |
| #endif /* VECT_TAB_SRAM */ |
| #endif /* USER_VECT_TAB_ADDRESS */ |
| |
| /******************************************************************************/ |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup STM32L5xx_System_Private_Macros |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup STM32L5xx_System_Private_Variables |
| * @{ |
| */ |
| /* The SystemCoreClock variable is updated in three ways: |
| 1) by calling CMSIS function SystemCoreClockUpdate() |
| 2) by calling HAL API function HAL_RCC_GetHCLKFreq() |
| 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency |
| Note: If you use this function to configure the system clock; then there |
| is no need to call the 2 first functions listed above, since SystemCoreClock |
| variable is updated automatically. |
| */ |
| uint32_t SystemCoreClock = 4000000U; |
| |
| const uint8_t AHBPrescTable[16] = {0U, 0U, 0U, 0U, 0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U, 6U, 7U, 8U, 9U}; |
| const uint8_t APBPrescTable[8] = {0U, 0U, 0U, 0U, 1U, 2U, 3U, 4U}; |
| const uint32_t MSIRangeTable[16] = {100000U, 200000U, 400000U, 800000U, 1000000U, 2000000U, \ |
| 4000000U, 8000000U, 16000000U, 24000000U, 32000000U, 48000000U, \ |
| 0U, 0U, 0U, 0U}; /* MISRAC-2012: 0U for unexpected value */ |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup STM32L5xx_System_Private_FunctionPrototypes |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup STM32L5xx_System_Private_Functions |
| * @{ |
| */ |
| |
| /** |
| * @brief Setup the microcontroller system. |
| * @retval None |
| */ |
| |
| void SystemInit(void) |
| { |
| /* Vector table location and FPU setup done by secure application */ |
| |
| /* Configure the Vector Table location -------------------------------------*/ |
| #if defined(USER_VECT_TAB_ADDRESS) |
| SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; |
| #endif |
| |
| /* Non-secure main application shall call SystemCoreClockUpdate() to update */ |
| /* the SystemCoreClock variable to insure non-secure application relies on */ |
| /* the initial clock reference set by secure application. */ |
| } |
| |
| /** |
| * @brief Update SystemCoreClock variable according to Clock Register Values. |
| * The SystemCoreClock variable contains the core clock (HCLK), it can |
| * be used by the user application to setup the SysTick timer or configure |
| * other parameters. |
| * |
| * @note From the non-secure application, the SystemCoreClock value is |
| * retrieved from the secure domain via a Non-Secure Callable function |
| * since the RCC peripheral may be protected with security attributes |
| * that prevent to compute the SystemCoreClock variable from the RCC |
| * peripheral registers. |
| * |
| * @note Each time the core clock (HCLK) changes, this function must be called |
| * to update SystemCoreClock variable value. Otherwise, any configuration |
| * based on this variable will be incorrect. |
| * |
| * @note - The system frequency computed by this function is not the real |
| * frequency in the chip. It is calculated based on the predefined |
| * constant and the selected clock source: |
| * |
| * - If SYSCLK source is MSI, SystemCoreClock will contain the MSI_VALUE(*) |
| * |
| * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**) |
| * |
| * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***) |
| * |
| * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(***) |
| * or HSI_VALUE(*) or MSI_VALUE(*) multiplied/divided by the PLL factors. |
| * |
| * (*) MSI_VALUE is a constant defined in stm32l5xx_hal.h file (default value |
| * 4 MHz) but the real value may vary depending on the variations |
| * in voltage and temperature. |
| * |
| * (**) HSI_VALUE is a constant defined in stm32l5xx_hal.h file (default value |
| * 16 MHz) but the real value may vary depending on the variations |
| * in voltage and temperature. |
| * |
| * (***) HSE_VALUE is a constant defined in stm32l5xx_hal.h file (default value |
| * 8 MHz), user has to ensure that HSE_VALUE is same as the real |
| * frequency of the crystal used. Otherwise, this function may |
| * have wrong result. |
| * |
| * - The result of this function could be not correct when using fractional |
| * value for HSE crystal. |
| * |
| * @retval None |
| */ |
| void SystemCoreClockUpdate(void) |
| { |
| /* Get the SystemCoreClock value from the secure domain */ |
| SystemCoreClock = SECURE_SystemCoreClockUpdate(); |
| } |
| |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |