Release v10.0.1_20190329
diff --git a/Source/portable/GCC/ARM_CM0/port.c b/Source/portable/GCC/ARM_CM0/port.c new file mode 100644 index 0000000..dc2c5c6 --- /dev/null +++ b/Source/portable/GCC/ARM_CM0/port.c
@@ -0,0 +1,561 @@ +/* + * FreeRTOS Kernel V10.0.1 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/*----------------------------------------------------------- + * Implementation of functions defined in portable.h for the ARM CM0 port. + *----------------------------------------------------------*/ + +/* Scheduler includes. */ +#include "FreeRTOS.h" +#include "task.h" + +#ifndef configSYSTICK_CLOCK_HZ + #define configSYSTICK_CLOCK_HZ configCPU_CLOCK_HZ +#endif + +/* Constants required to manipulate the NVIC. */ +#define portNVIC_SYSTICK_CTRL (* ( ( volatile uint32_t *) 0xe000e010 ) ) +#define portNVIC_SYSTICK_LOAD (* ( ( volatile uint32_t *) 0xe000e014 ) ) +#define portNVIC_SYSTICK_CURRENT_VALUE (* ( ( volatile uint32_t * ) 0xe000e018 )) +#define portNVIC_INT_CTRL ( ( volatile uint32_t *) 0xe000ed04 ) +#define portNVIC_SYSPRI2 ( ( volatile uint32_t *) 0xe000ed20 ) +#define portNVIC_SYSTICK_CLK 0x00000004 +#define portNVIC_SYSTICK_INT 0x00000002 +#define portNVIC_SYSTICK_ENABLE 0x00000001 +#define portNVIC_SYSTICK_COUNT_FLAG ( 1UL << 16UL ) +#define portNVIC_PENDSVSET 0x10000000 +#define portMIN_INTERRUPT_PRIORITY ( 255UL ) +#define portNVIC_PENDSV_PRI ( portMIN_INTERRUPT_PRIORITY << 16UL ) +#define portNVIC_SYSTICK_PRI ( portMIN_INTERRUPT_PRIORITY << 24UL ) + +/* Constants required to set up the initial stack. */ +#define portINITIAL_XPSR ( 0x01000000 ) + +/* The systick is a 24-bit counter. */ +#define portMAX_24_BIT_NUMBER ( 0xffffffUL ) + +/* A fiddle factor to estimate the number of SysTick counts that would have +occurred while the SysTick counter is stopped during tickless idle +calculations. */ +#define portMISSED_COUNTS_FACTOR ( 45UL ) + +/* Let the user override the pre-loading of the initial LR with the address of +prvTaskExitError() in case it messes up unwinding of the stack in the +debugger. */ +#ifdef configTASK_RETURN_ADDRESS + #define portTASK_RETURN_ADDRESS configTASK_RETURN_ADDRESS +#else + #define portTASK_RETURN_ADDRESS prvTaskExitError +#endif + +/* + * Setup the timer to generate the tick interrupts. + */ +static void prvSetupTimerInterrupt( void ); + +/* + * Exception handlers. + */ +void xPortPendSVHandler( void ) __attribute__ (( naked )); +void xPortSysTickHandler( void ); +void vPortSVCHandler( void ); + +/* + * Start first task is a separate function so it can be tested in isolation. + */ +static void vPortStartFirstTask( void ) __attribute__ (( naked )); + +/* + * Used to catch tasks that attempt to return from their implementing function. + */ +static void prvTaskExitError( void ); + +/*-----------------------------------------------------------*/ + +/* Each task maintains its own interrupt status in the critical nesting +variable. */ +static UBaseType_t uxCriticalNesting = 0xaaaaaaaa; + +/*-----------------------------------------------------------*/ + +/* + * The number of SysTick increments that make up one tick period. + */ +#if configUSE_TICKLESS_IDLE == 1 + static unsigned long ulTimerCountsForOneTick = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * The maximum number of tick periods that can be suppressed is limited by the + * 24 bit resolution of the SysTick timer. + */ +#if configUSE_TICKLESS_IDLE == 1 + static unsigned long xMaximumPossibleSuppressedTicks = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * Compensate for the CPU cycles that pass while the SysTick is stopped (low + * power functionality only. + */ +#if configUSE_TICKLESS_IDLE == 1 + static unsigned long ulStoppedTimerCompensation = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters ) +{ + /* Simulate the stack frame as it would be created by a context switch + interrupt. */ + pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */ + *pxTopOfStack = portINITIAL_XPSR; /* xPSR */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) pxCode; /* PC */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */ + pxTopOfStack -= 5; /* R12, R3, R2 and R1. */ + *pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */ + pxTopOfStack -= 8; /* R11..R4. */ + + return pxTopOfStack; +} +/*-----------------------------------------------------------*/ + +static void prvTaskExitError( void ) +{ +volatile uint32_t ulDummy = 0UL; + + /* A function that implements a task must not exit or attempt to return to + its caller as there is nothing to return to. If a task wants to exit it + should instead call vTaskDelete( NULL ). + + Artificially force an assert() to be triggered if configASSERT() is + defined, then stop here so application writers can catch the error. */ + configASSERT( uxCriticalNesting == ~0UL ); + portDISABLE_INTERRUPTS(); + while( ulDummy == 0 ) + { + /* This file calls prvTaskExitError() after the scheduler has been + started to remove a compiler warning about the function being defined + but never called. ulDummy is used purely to quieten other warnings + about code appearing after this function is called - making ulDummy + volatile makes the compiler think the function could return and + therefore not output an 'unreachable code' warning for code that appears + after it. */ + } +} +/*-----------------------------------------------------------*/ + +void vPortSVCHandler( void ) +{ + /* This function is no longer used, but retained for backward + compatibility. */ +} +/*-----------------------------------------------------------*/ + +void vPortStartFirstTask( void ) +{ + /* The MSP stack is not reset as, unlike on M3/4 parts, there is no vector + table offset register that can be used to locate the initial stack value. + Not all M0 parts have the application vector table at address 0. */ + __asm volatile( + " .syntax unified \n" + " ldr r2, pxCurrentTCBConst2 \n" /* Obtain location of pxCurrentTCB. */ + " ldr r3, [r2] \n" + " ldr r0, [r3] \n" /* The first item in pxCurrentTCB is the task top of stack. */ + " adds r0, #32 \n" /* Discard everything up to r0. */ + " msr psp, r0 \n" /* This is now the new top of stack to use in the task. */ + " movs r0, #2 \n" /* Switch to the psp stack. */ + " msr CONTROL, r0 \n" + " isb \n" + " pop {r0-r5} \n" /* Pop the registers that are saved automatically. */ + " mov lr, r5 \n" /* lr is now in r5. */ + " pop {r3} \n" /* Return address is now in r3. */ + " pop {r2} \n" /* Pop and discard XPSR. */ + " cpsie i \n" /* The first task has its context and interrupts can be enabled. */ + " bx r3 \n" /* Finally, jump to the user defined task code. */ + " \n" + " .align 4 \n" + "pxCurrentTCBConst2: .word pxCurrentTCB " + ); +} +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +BaseType_t xPortStartScheduler( void ) +{ + /* Make PendSV, CallSV and SysTick the same priroity as the kernel. */ + *(portNVIC_SYSPRI2) |= portNVIC_PENDSV_PRI; + *(portNVIC_SYSPRI2) |= portNVIC_SYSTICK_PRI; + + /* Start the timer that generates the tick ISR. Interrupts are disabled + here already. */ + prvSetupTimerInterrupt(); + + /* Initialise the critical nesting count ready for the first task. */ + uxCriticalNesting = 0; + + /* Start the first task. */ + vPortStartFirstTask(); + + /* Should never get here as the tasks will now be executing! Call the task + exit error function to prevent compiler warnings about a static function + not being called in the case that the application writer overrides this + functionality by defining configTASK_RETURN_ADDRESS. Call + vTaskSwitchContext() so link time optimisation does not remove the + symbol. */ + vTaskSwitchContext(); + prvTaskExitError(); + + /* Should not get here! */ + return 0; +} +/*-----------------------------------------------------------*/ + +void vPortEndScheduler( void ) +{ + /* Not implemented in ports where there is nothing to return to. + Artificially force an assert. */ + configASSERT( uxCriticalNesting == 1000UL ); +} +/*-----------------------------------------------------------*/ + +void vPortYield( void ) +{ + /* Set a PendSV to request a context switch. */ + *( portNVIC_INT_CTRL ) = portNVIC_PENDSVSET; + + /* Barriers are normally not required but do ensure the code is completely + within the specified behaviour for the architecture. */ + __asm volatile( "dsb" ::: "memory" ); + __asm volatile( "isb" ); +} +/*-----------------------------------------------------------*/ + +void vPortEnterCritical( void ) +{ + portDISABLE_INTERRUPTS(); + uxCriticalNesting++; + __asm volatile( "dsb" ::: "memory" ); + __asm volatile( "isb" ); +} +/*-----------------------------------------------------------*/ + +void vPortExitCritical( void ) +{ + configASSERT( uxCriticalNesting ); + uxCriticalNesting--; + if( uxCriticalNesting == 0 ) + { + portENABLE_INTERRUPTS(); + } +} +/*-----------------------------------------------------------*/ + +uint32_t ulSetInterruptMaskFromISR( void ) +{ + __asm volatile( + " mrs r0, PRIMASK \n" + " cpsid i \n" + " bx lr " + ::: "memory" + ); + +#if !defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + /* To avoid compiler warnings. The return statement will nevere be reached, + but some compilers warn if it is not included, while others won't compile if + it is. */ + return 0; +#endif +} +/*-----------------------------------------------------------*/ + +void vClearInterruptMaskFromISR( __attribute__( ( unused ) ) uint32_t ulMask ) +{ + __asm volatile( + " msr PRIMASK, r0 \n" + " bx lr " + ::: "memory" + ); + +#if !defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050) + /* Just to avoid compiler warning. ulMask is used from the asm code but + the compiler can't see that. Some compilers generate warnings without the + following line, while others generate warnings if the line is included. */ + ( void ) ulMask; +#endif +} +/*-----------------------------------------------------------*/ + +void xPortPendSVHandler( void ) +{ + /* This is a naked function. */ + + __asm volatile + ( + " .syntax unified \n" + " mrs r0, psp \n" + " \n" + " ldr r3, pxCurrentTCBConst \n" /* Get the location of the current TCB. */ + " ldr r2, [r3] \n" + " \n" + " subs r0, r0, #32 \n" /* Make space for the remaining low registers. */ + " str r0, [r2] \n" /* Save the new top of stack. */ + " stmia r0!, {r4-r7} \n" /* Store the low registers that are not saved automatically. */ + " mov r4, r8 \n" /* Store the high registers. */ + " mov r5, r9 \n" + " mov r6, r10 \n" + " mov r7, r11 \n" + " stmia r0!, {r4-r7} \n" + " \n" + " push {r3, r14} \n" + " cpsid i \n" + " bl vTaskSwitchContext \n" + " cpsie i \n" + " pop {r2, r3} \n" /* lr goes in r3. r2 now holds tcb pointer. */ + " \n" + " ldr r1, [r2] \n" + " ldr r0, [r1] \n" /* The first item in pxCurrentTCB is the task top of stack. */ + " adds r0, r0, #16 \n" /* Move to the high registers. */ + " ldmia r0!, {r4-r7} \n" /* Pop the high registers. */ + " mov r8, r4 \n" + " mov r9, r5 \n" + " mov r10, r6 \n" + " mov r11, r7 \n" + " \n" + " msr psp, r0 \n" /* Remember the new top of stack for the task. */ + " \n" + " subs r0, r0, #32 \n" /* Go back for the low registers that are not automatically restored. */ + " ldmia r0!, {r4-r7} \n" /* Pop low registers. */ + " \n" + " bx r3 \n" + " \n" + " .align 4 \n" + "pxCurrentTCBConst: .word pxCurrentTCB " + ); +} +/*-----------------------------------------------------------*/ + +void xPortSysTickHandler( void ) +{ +uint32_t ulPreviousMask; + + ulPreviousMask = portSET_INTERRUPT_MASK_FROM_ISR(); + { + /* Increment the RTOS tick. */ + if( xTaskIncrementTick() != pdFALSE ) + { + /* Pend a context switch. */ + *(portNVIC_INT_CTRL) = portNVIC_PENDSVSET; + } + } + portCLEAR_INTERRUPT_MASK_FROM_ISR( ulPreviousMask ); +} +/*-----------------------------------------------------------*/ + +#if configUSE_TICKLESS_IDLE == 1 + + __attribute__((weak)) void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime ) + { + uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements, ulSysTickCTRL; + TickType_t xModifiableIdleTime; + + /* Make sure the SysTick reload value does not overflow the counter. */ + if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks ) + { + xExpectedIdleTime = xMaximumPossibleSuppressedTicks; + } + + /* Stop the SysTick momentarily. The time the SysTick is stopped for + is accounted for as best it can be, but using the tickless mode will + inevitably result in some tiny drift of the time maintained by the + kernel with respect to calendar time. */ + portNVIC_SYSTICK_CTRL &= ~portNVIC_SYSTICK_ENABLE; + + /* Calculate the reload value required to wait xExpectedIdleTime + tick periods. -1 is used because this code will execute part way + through one of the tick periods. */ + ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) ); + if( ulReloadValue > ulStoppedTimerCompensation ) + { + ulReloadValue -= ulStoppedTimerCompensation; + } + + /* Enter a critical section but don't use the taskENTER_CRITICAL() + method as that will mask interrupts that should exit sleep mode. */ + __asm volatile( "cpsid i" ); + + /* If a context switch is pending or a task is waiting for the scheduler + to be unsuspended then abandon the low power entry. */ + if( eTaskConfirmSleepModeStatus() == eAbortSleep ) + { + /* Restart from whatever is left in the count register to complete + this tick period. */ + portNVIC_SYSTICK_LOAD = portNVIC_SYSTICK_CURRENT_VALUE; + + /* Restart SysTick. */ + portNVIC_SYSTICK_CTRL |= portNVIC_SYSTICK_ENABLE; + + /* Reset the reload register to the value required for normal tick + periods. */ + portNVIC_SYSTICK_LOAD = ulTimerCountsForOneTick - 1UL; + + /* Re-enable interrupts - see comments above the cpsid instruction() + above. */ + __asm volatile( "cpsie i" ); + } + else + { + /* Set the new reload value. */ + portNVIC_SYSTICK_LOAD = ulReloadValue; + + /* Clear the SysTick count flag and set the count value back to + zero. */ + portNVIC_SYSTICK_CURRENT_VALUE = 0UL; + + /* Restart SysTick. */ + portNVIC_SYSTICK_CTRL |= portNVIC_SYSTICK_ENABLE; + + /* Sleep until something happens. configPRE_SLEEP_PROCESSING() can + set its parameter to 0 to indicate that its implementation contains + its own wait for interrupt or wait for event instruction, and so wfi + should not be executed again. However, the original expected idle + time variable must remain unmodified, so a copy is taken. */ + xModifiableIdleTime = xExpectedIdleTime; + configPRE_SLEEP_PROCESSING( &xModifiableIdleTime ); + if( xModifiableIdleTime > 0 ) + { + __asm volatile( "dsb" ); + __asm volatile( "wfi" ); + __asm volatile( "isb" ); + } + configPOST_SLEEP_PROCESSING( &xExpectedIdleTime ); + + /* Stop SysTick. Again, the time the SysTick is stopped for is + accounted for as best it can be, but using the tickless mode will + inevitably result in some tiny drift of the time maintained by the + kernel with respect to calendar time. */ + ulSysTickCTRL = portNVIC_SYSTICK_CTRL; + portNVIC_SYSTICK_CTRL = ( ulSysTickCTRL & ~portNVIC_SYSTICK_ENABLE ); + + /* Re-enable interrupts - see comments above the cpsid instruction() + above. */ + __asm volatile( "cpsie i" ); + + if( ( ulSysTickCTRL & portNVIC_SYSTICK_COUNT_FLAG ) != 0 ) + { + uint32_t ulCalculatedLoadValue; + + /* The tick interrupt has already executed, and the SysTick + count reloaded with ulReloadValue. Reset the + portNVIC_SYSTICK_LOAD with whatever remains of this tick + period. */ + ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE ); + + /* Don't allow a tiny value, or values that have somehow + underflowed because the post sleep hook did something + that took too long. */ + if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) ) + { + ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ); + } + + portNVIC_SYSTICK_LOAD = ulCalculatedLoadValue; + + /* The tick interrupt handler will already have pended the tick + processing in the kernel. As the pending tick will be + processed as soon as this function exits, the tick value + maintained by the tick is stepped forward by one less than the + time spent waiting. */ + ulCompleteTickPeriods = xExpectedIdleTime - 1UL; + } + else + { + /* Something other than the tick interrupt ended the sleep. + Work out how long the sleep lasted rounded to complete tick + periods (not the ulReload value which accounted for part + ticks). */ + ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE; + + /* How many complete tick periods passed while the processor + was waiting? */ + ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick; + + /* The reload value is set to whatever fraction of a single tick + period remains. */ + portNVIC_SYSTICK_LOAD = ( ( ulCompleteTickPeriods + 1 ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements; + } + + /* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD + again, then set portNVIC_SYSTICK_LOAD back to its standard + value. The critical section is used to ensure the tick interrupt + can only execute once in the case that the reload register is near + zero. */ + portNVIC_SYSTICK_CURRENT_VALUE = 0UL; + portENTER_CRITICAL(); + { + portNVIC_SYSTICK_CTRL |= portNVIC_SYSTICK_ENABLE; + vTaskStepTick( ulCompleteTickPeriods ); + portNVIC_SYSTICK_LOAD = ulTimerCountsForOneTick - 1UL; + } + portEXIT_CRITICAL(); + } + } + +#endif /* #if configUSE_TICKLESS_IDLE */ +/*-----------------------------------------------------------*/ + +/* + * Setup the systick timer to generate the tick interrupts at the required + * frequency. + */ +void prvSetupTimerInterrupt( void ) +{ + /* Calculate the constants required to configure the tick interrupt. */ + #if configUSE_TICKLESS_IDLE == 1 + { + ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ); + xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick; + ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ ); + } + #endif /* configUSE_TICKLESS_IDLE */ + +/* Stop and reset the SysTick. */ + portNVIC_SYSTICK_CTRL = 0UL; + portNVIC_SYSTICK_CURRENT_VALUE = 0UL; + + /* Configure SysTick to interrupt at the requested rate. */ + portNVIC_SYSTICK_LOAD = ( configCPU_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL; + portNVIC_SYSTICK_CTRL = portNVIC_SYSTICK_CLK | portNVIC_SYSTICK_INT | portNVIC_SYSTICK_ENABLE; +} +/*-----------------------------------------------------------*/ +
diff --git a/Source/portable/GCC/ARM_CM0/portmacro.h b/Source/portable/GCC/ARM_CM0/portmacro.h new file mode 100644 index 0000000..2ca4cb9 --- /dev/null +++ b/Source/portable/GCC/ARM_CM0/portmacro.h
@@ -0,0 +1,123 @@ +/* + * FreeRTOS Kernel V10.0.1 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef PORTMACRO_H +#define PORTMACRO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/*----------------------------------------------------------- + * Port specific definitions. + * + * The settings in this file configure FreeRTOS correctly for the + * given hardware and compiler. + * + * These settings should not be altered. + *----------------------------------------------------------- + */ + +/* Type definitions. */ +#define portCHAR char +#define portFLOAT float +#define portDOUBLE double +#define portLONG long +#define portSHORT short +#define portSTACK_TYPE uint32_t +#define portBASE_TYPE long + +typedef portSTACK_TYPE StackType_t; +typedef long BaseType_t; +typedef unsigned long UBaseType_t; + +#if( configUSE_16_BIT_TICKS == 1 ) + typedef uint16_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffff +#else + typedef uint32_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffffffffUL + + /* 32-bit tick type on a 32-bit architecture, so reads of the tick count do + not need to be guarded with a critical section. */ + #define portTICK_TYPE_IS_ATOMIC 1 +#endif +/*-----------------------------------------------------------*/ + +/* Architecture specifics. */ +#define portSTACK_GROWTH ( -1 ) +#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ ) +#define portBYTE_ALIGNMENT 8 +/*-----------------------------------------------------------*/ + + +/* Scheduler utilities. */ +extern void vPortYield( void ); +#define portNVIC_INT_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000ed04 ) ) +#define portNVIC_PENDSVSET_BIT ( 1UL << 28UL ) +#define portYIELD() vPortYield() +#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT +#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x ) +/*-----------------------------------------------------------*/ + + +/* Critical section management. */ +extern void vPortEnterCritical( void ); +extern void vPortExitCritical( void ); +extern uint32_t ulSetInterruptMaskFromISR( void ) __attribute__((naked)); +extern void vClearInterruptMaskFromISR( uint32_t ulMask ) __attribute__((naked)); + +#define portSET_INTERRUPT_MASK_FROM_ISR() ulSetInterruptMaskFromISR() +#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) vClearInterruptMaskFromISR( x ) +#define portDISABLE_INTERRUPTS() __asm volatile ( " cpsid i " ::: "memory" ) +#define portENABLE_INTERRUPTS() __asm volatile ( " cpsie i " ::: "memory" ) +#define portENTER_CRITICAL() vPortEnterCritical() +#define portEXIT_CRITICAL() vPortExitCritical() + +/*-----------------------------------------------------------*/ + +/* Tickless idle/low power functionality. */ +#ifndef portSUPPRESS_TICKS_AND_SLEEP + extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime ); + #define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime ) +#endif + +/*-----------------------------------------------------------*/ + +/* Task function macros as described on the FreeRTOS.org WEB site. */ +#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters ) +#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters ) + +#define portNOP() + +#ifdef __cplusplus +} +#endif + +#endif /* PORTMACRO_H */ +
diff --git a/Source/portable/GCC/ARM_CM3/port.c b/Source/portable/GCC/ARM_CM3/port.c new file mode 100644 index 0000000..d7709c0 --- /dev/null +++ b/Source/portable/GCC/ARM_CM3/port.c
@@ -0,0 +1,717 @@ +/* + * FreeRTOS Kernel V10.0.1 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/*----------------------------------------------------------- + * Implementation of functions defined in portable.h for the ARM CM3 port. + *----------------------------------------------------------*/ + +/* Scheduler includes. */ +#include "FreeRTOS.h" +#include "task.h" + +/* For backward compatibility, ensure configKERNEL_INTERRUPT_PRIORITY is +defined. The value should also ensure backward compatibility. +FreeRTOS.org versions prior to V4.4.0 did not include this definition. */ +#ifndef configKERNEL_INTERRUPT_PRIORITY + #define configKERNEL_INTERRUPT_PRIORITY 255 +#endif + +#ifndef configSYSTICK_CLOCK_HZ + #define configSYSTICK_CLOCK_HZ configCPU_CLOCK_HZ + /* Ensure the SysTick is clocked at the same frequency as the core. */ + #define portNVIC_SYSTICK_CLK_BIT ( 1UL << 2UL ) +#else + /* The way the SysTick is clocked is not modified in case it is not the same + as the core. */ + #define portNVIC_SYSTICK_CLK_BIT ( 0 ) +#endif + +/* Constants required to manipulate the core. Registers first... */ +#define portNVIC_SYSTICK_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000e010 ) ) +#define portNVIC_SYSTICK_LOAD_REG ( * ( ( volatile uint32_t * ) 0xe000e014 ) ) +#define portNVIC_SYSTICK_CURRENT_VALUE_REG ( * ( ( volatile uint32_t * ) 0xe000e018 ) ) +#define portNVIC_SYSPRI2_REG ( * ( ( volatile uint32_t * ) 0xe000ed20 ) ) +/* ...then bits in the registers. */ +#define portNVIC_SYSTICK_INT_BIT ( 1UL << 1UL ) +#define portNVIC_SYSTICK_ENABLE_BIT ( 1UL << 0UL ) +#define portNVIC_SYSTICK_COUNT_FLAG_BIT ( 1UL << 16UL ) +#define portNVIC_PENDSVCLEAR_BIT ( 1UL << 27UL ) +#define portNVIC_PEND_SYSTICK_CLEAR_BIT ( 1UL << 25UL ) + +#define portNVIC_PENDSV_PRI ( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 16UL ) +#define portNVIC_SYSTICK_PRI ( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 24UL ) + +/* Constants required to check the validity of an interrupt priority. */ +#define portFIRST_USER_INTERRUPT_NUMBER ( 16 ) +#define portNVIC_IP_REGISTERS_OFFSET_16 ( 0xE000E3F0 ) +#define portAIRCR_REG ( * ( ( volatile uint32_t * ) 0xE000ED0C ) ) +#define portMAX_8_BIT_VALUE ( ( uint8_t ) 0xff ) +#define portTOP_BIT_OF_BYTE ( ( uint8_t ) 0x80 ) +#define portMAX_PRIGROUP_BITS ( ( uint8_t ) 7 ) +#define portPRIORITY_GROUP_MASK ( 0x07UL << 8UL ) +#define portPRIGROUP_SHIFT ( 8UL ) + +/* Masks off all bits but the VECTACTIVE bits in the ICSR register. */ +#define portVECTACTIVE_MASK ( 0xFFUL ) + +/* Constants required to set up the initial stack. */ +#define portINITIAL_XPSR ( 0x01000000UL ) + +/* The systick is a 24-bit counter. */ +#define portMAX_24_BIT_NUMBER ( 0xffffffUL ) + +/* A fiddle factor to estimate the number of SysTick counts that would have +occurred while the SysTick counter is stopped during tickless idle +calculations. */ +#define portMISSED_COUNTS_FACTOR ( 45UL ) + +/* For strict compliance with the Cortex-M spec the task start address should +have bit-0 clear, as it is loaded into the PC on exit from an ISR. */ +#define portSTART_ADDRESS_MASK ( ( StackType_t ) 0xfffffffeUL ) + +/* Let the user override the pre-loading of the initial LR with the address of +prvTaskExitError() in case it messes up unwinding of the stack in the +debugger. */ +#ifdef configTASK_RETURN_ADDRESS + #define portTASK_RETURN_ADDRESS configTASK_RETURN_ADDRESS +#else + #define portTASK_RETURN_ADDRESS prvTaskExitError +#endif + +/* + * Setup the timer to generate the tick interrupts. The implementation in this + * file is weak to allow application writers to change the timer used to + * generate the tick interrupt. + */ +void vPortSetupTimerInterrupt( void ); + +/* + * Exception handlers. + */ +void xPortPendSVHandler( void ) __attribute__ (( naked )); +void xPortSysTickHandler( void ); +void vPortSVCHandler( void ) __attribute__ (( naked )); + +/* + * Start first task is a separate function so it can be tested in isolation. + */ +static void prvPortStartFirstTask( void ) __attribute__ (( naked )); + +/* + * Used to catch tasks that attempt to return from their implementing function. + */ +static void prvTaskExitError( void ); + +/*-----------------------------------------------------------*/ + +/* Each task maintains its own interrupt status in the critical nesting +variable. */ +static UBaseType_t uxCriticalNesting = 0xaaaaaaaa; + +/* + * The number of SysTick increments that make up one tick period. + */ +#if( configUSE_TICKLESS_IDLE == 1 ) + static uint32_t ulTimerCountsForOneTick = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * The maximum number of tick periods that can be suppressed is limited by the + * 24 bit resolution of the SysTick timer. + */ +#if( configUSE_TICKLESS_IDLE == 1 ) + static uint32_t xMaximumPossibleSuppressedTicks = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * Compensate for the CPU cycles that pass while the SysTick is stopped (low + * power functionality only. + */ +#if( configUSE_TICKLESS_IDLE == 1 ) + static uint32_t ulStoppedTimerCompensation = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * Used by the portASSERT_IF_INTERRUPT_PRIORITY_INVALID() macro to ensure + * FreeRTOS API functions are not called from interrupts that have been assigned + * a priority above configMAX_SYSCALL_INTERRUPT_PRIORITY. + */ +#if( configASSERT_DEFINED == 1 ) + static uint8_t ucMaxSysCallPriority = 0; + static uint32_t ulMaxPRIGROUPValue = 0; + static const volatile uint8_t * const pcInterruptPriorityRegisters = ( const volatile uint8_t * const ) portNVIC_IP_REGISTERS_OFFSET_16; +#endif /* configASSERT_DEFINED */ + +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters ) +{ + /* Simulate the stack frame as it would be created by a context switch + interrupt. */ + pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */ + *pxTopOfStack = portINITIAL_XPSR; /* xPSR */ + pxTopOfStack--; + *pxTopOfStack = ( ( StackType_t ) pxCode ) & portSTART_ADDRESS_MASK; /* PC */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */ + pxTopOfStack -= 5; /* R12, R3, R2 and R1. */ + *pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */ + pxTopOfStack -= 8; /* R11, R10, R9, R8, R7, R6, R5 and R4. */ + + return pxTopOfStack; +} +/*-----------------------------------------------------------*/ + +static void prvTaskExitError( void ) +{ +volatile uint32_t ulDummy = 0UL; + + /* A function that implements a task must not exit or attempt to return to + its caller as there is nothing to return to. If a task wants to exit it + should instead call vTaskDelete( NULL ). + + Artificially force an assert() to be triggered if configASSERT() is + defined, then stop here so application writers can catch the error. */ + configASSERT( uxCriticalNesting == ~0UL ); + portDISABLE_INTERRUPTS(); + while( ulDummy == 0 ) + { + /* This file calls prvTaskExitError() after the scheduler has been + started to remove a compiler warning about the function being defined + but never called. ulDummy is used purely to quieten other warnings + about code appearing after this function is called - making ulDummy + volatile makes the compiler think the function could return and + therefore not output an 'unreachable code' warning for code that appears + after it. */ + } +} +/*-----------------------------------------------------------*/ + +void vPortSVCHandler( void ) +{ + __asm volatile ( + " ldr r3, pxCurrentTCBConst2 \n" /* Restore the context. */ + " ldr r1, [r3] \n" /* Use pxCurrentTCBConst to get the pxCurrentTCB address. */ + " ldr r0, [r1] \n" /* The first item in pxCurrentTCB is the task top of stack. */ + " ldmia r0!, {r4-r11} \n" /* Pop the registers that are not automatically saved on exception entry and the critical nesting count. */ + " msr psp, r0 \n" /* Restore the task stack pointer. */ + " isb \n" + " mov r0, #0 \n" + " msr basepri, r0 \n" + " orr r14, #0xd \n" + " bx r14 \n" + " \n" + " .align 4 \n" + "pxCurrentTCBConst2: .word pxCurrentTCB \n" + ); +} +/*-----------------------------------------------------------*/ + +static void prvPortStartFirstTask( void ) +{ + __asm volatile( + " ldr r0, =0xE000ED08 \n" /* Use the NVIC offset register to locate the stack. */ + " ldr r0, [r0] \n" + " ldr r0, [r0] \n" + " msr msp, r0 \n" /* Set the msp back to the start of the stack. */ + " cpsie i \n" /* Globally enable interrupts. */ + " cpsie f \n" + " dsb \n" + " isb \n" + " svc 0 \n" /* System call to start first task. */ + " nop \n" + ); +} +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +BaseType_t xPortStartScheduler( void ) +{ + /* configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0. + See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html */ + configASSERT( configMAX_SYSCALL_INTERRUPT_PRIORITY ); + + #if( configASSERT_DEFINED == 1 ) + { + volatile uint32_t ulOriginalPriority; + volatile uint8_t * const pucFirstUserPriorityRegister = ( volatile uint8_t * const ) ( portNVIC_IP_REGISTERS_OFFSET_16 + portFIRST_USER_INTERRUPT_NUMBER ); + volatile uint8_t ucMaxPriorityValue; + + /* Determine the maximum priority from which ISR safe FreeRTOS API + functions can be called. ISR safe functions are those that end in + "FromISR". FreeRTOS maintains separate thread and ISR API functions to + ensure interrupt entry is as fast and simple as possible. + + Save the interrupt priority value that is about to be clobbered. */ + ulOriginalPriority = *pucFirstUserPriorityRegister; + + /* Determine the number of priority bits available. First write to all + possible bits. */ + *pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE; + + /* Read the value back to see how many bits stuck. */ + ucMaxPriorityValue = *pucFirstUserPriorityRegister; + + /* Use the same mask on the maximum system call priority. */ + ucMaxSysCallPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY & ucMaxPriorityValue; + + /* Calculate the maximum acceptable priority group value for the number + of bits read back. */ + ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS; + while( ( ucMaxPriorityValue & portTOP_BIT_OF_BYTE ) == portTOP_BIT_OF_BYTE ) + { + ulMaxPRIGROUPValue--; + ucMaxPriorityValue <<= ( uint8_t ) 0x01; + } + + #ifdef __NVIC_PRIO_BITS + { + /* Check the CMSIS configuration that defines the number of + priority bits matches the number of priority bits actually queried + from the hardware. */ + configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == __NVIC_PRIO_BITS ); + } + #endif + + #ifdef configPRIO_BITS + { + /* Check the FreeRTOS configuration that defines the number of + priority bits matches the number of priority bits actually queried + from the hardware. */ + configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == configPRIO_BITS ); + } + #endif + + /* Shift the priority group value back to its position within the AIRCR + register. */ + ulMaxPRIGROUPValue <<= portPRIGROUP_SHIFT; + ulMaxPRIGROUPValue &= portPRIORITY_GROUP_MASK; + + /* Restore the clobbered interrupt priority register to its original + value. */ + *pucFirstUserPriorityRegister = ulOriginalPriority; + } + #endif /* conifgASSERT_DEFINED */ + + /* Make PendSV and SysTick the lowest priority interrupts. */ + portNVIC_SYSPRI2_REG |= portNVIC_PENDSV_PRI; + portNVIC_SYSPRI2_REG |= portNVIC_SYSTICK_PRI; + + /* Start the timer that generates the tick ISR. Interrupts are disabled + here already. */ + vPortSetupTimerInterrupt(); + + /* Initialise the critical nesting count ready for the first task. */ + uxCriticalNesting = 0; + + /* Start the first task. */ + prvPortStartFirstTask(); + + /* Should never get here as the tasks will now be executing! Call the task + exit error function to prevent compiler warnings about a static function + not being called in the case that the application writer overrides this + functionality by defining configTASK_RETURN_ADDRESS. Call + vTaskSwitchContext() so link time optimisation does not remove the + symbol. */ + vTaskSwitchContext(); + prvTaskExitError(); + + /* Should not get here! */ + return 0; +} +/*-----------------------------------------------------------*/ + +void vPortEndScheduler( void ) +{ + /* Not implemented in ports where there is nothing to return to. + Artificially force an assert. */ + configASSERT( uxCriticalNesting == 1000UL ); +} +/*-----------------------------------------------------------*/ + +void vPortEnterCritical( void ) +{ + portDISABLE_INTERRUPTS(); + uxCriticalNesting++; + + /* This is not the interrupt safe version of the enter critical function so + assert() if it is being called from an interrupt context. Only API + functions that end in "FromISR" can be used in an interrupt. Only assert if + the critical nesting count is 1 to protect against recursive calls if the + assert function also uses a critical section. */ + if( uxCriticalNesting == 1 ) + { + configASSERT( ( portNVIC_INT_CTRL_REG & portVECTACTIVE_MASK ) == 0 ); + } +} +/*-----------------------------------------------------------*/ + +void vPortExitCritical( void ) +{ + configASSERT( uxCriticalNesting ); + uxCriticalNesting--; + if( uxCriticalNesting == 0 ) + { + portENABLE_INTERRUPTS(); + } +} +/*-----------------------------------------------------------*/ + +void xPortPendSVHandler( void ) +{ + /* This is a naked function. */ + + __asm volatile + ( + " mrs r0, psp \n" + " isb \n" + " \n" + " ldr r3, pxCurrentTCBConst \n" /* Get the location of the current TCB. */ + " ldr r2, [r3] \n" + " \n" + " stmdb r0!, {r4-r11} \n" /* Save the remaining registers. */ + " str r0, [r2] \n" /* Save the new top of stack into the first member of the TCB. */ + " \n" + " stmdb sp!, {r3, r14} \n" + " mov r0, %0 \n" + " msr basepri, r0 \n" + " bl vTaskSwitchContext \n" + " mov r0, #0 \n" + " msr basepri, r0 \n" + " ldmia sp!, {r3, r14} \n" + " \n" /* Restore the context, including the critical nesting count. */ + " ldr r1, [r3] \n" + " ldr r0, [r1] \n" /* The first item in pxCurrentTCB is the task top of stack. */ + " ldmia r0!, {r4-r11} \n" /* Pop the registers. */ + " msr psp, r0 \n" + " isb \n" + " bx r14 \n" + " \n" + " .align 4 \n" + "pxCurrentTCBConst: .word pxCurrentTCB \n" + ::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY) + ); +} +/*-----------------------------------------------------------*/ + +void xPortSysTickHandler( void ) +{ + /* The SysTick runs at the lowest interrupt priority, so when this interrupt + executes all interrupts must be unmasked. There is therefore no need to + save and then restore the interrupt mask value as its value is already + known. */ + portDISABLE_INTERRUPTS(); + { + /* Increment the RTOS tick. */ + if( xTaskIncrementTick() != pdFALSE ) + { + /* A context switch is required. Context switching is performed in + the PendSV interrupt. Pend the PendSV interrupt. */ + portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; + } + } + portENABLE_INTERRUPTS(); +} +/*-----------------------------------------------------------*/ + +#if( configUSE_TICKLESS_IDLE == 1 ) + + __attribute__((weak)) void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime ) + { + uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements; + TickType_t xModifiableIdleTime; + + /* Make sure the SysTick reload value does not overflow the counter. */ + if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks ) + { + xExpectedIdleTime = xMaximumPossibleSuppressedTicks; + } + + /* Stop the SysTick momentarily. The time the SysTick is stopped for + is accounted for as best it can be, but using the tickless mode will + inevitably result in some tiny drift of the time maintained by the + kernel with respect to calendar time. */ + portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE_BIT; + + /* Calculate the reload value required to wait xExpectedIdleTime + tick periods. -1 is used because this code will execute part way + through one of the tick periods. */ + ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) ); + if( ulReloadValue > ulStoppedTimerCompensation ) + { + ulReloadValue -= ulStoppedTimerCompensation; + } + + /* Enter a critical section but don't use the taskENTER_CRITICAL() + method as that will mask interrupts that should exit sleep mode. */ + __asm volatile( "cpsid i" ::: "memory" ); + __asm volatile( "dsb" ); + __asm volatile( "isb" ); + + /* If a context switch is pending or a task is waiting for the scheduler + to be unsuspended then abandon the low power entry. */ + if( eTaskConfirmSleepModeStatus() == eAbortSleep ) + { + /* Restart from whatever is left in the count register to complete + this tick period. */ + portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG; + + /* Restart SysTick. */ + portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT; + + /* Reset the reload register to the value required for normal tick + periods. */ + portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL; + + /* Re-enable interrupts - see comments above the cpsid instruction() + above. */ + __asm volatile( "cpsie i" ::: "memory" ); + } + else + { + /* Set the new reload value. */ + portNVIC_SYSTICK_LOAD_REG = ulReloadValue; + + /* Clear the SysTick count flag and set the count value back to + zero. */ + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + + /* Restart SysTick. */ + portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT; + + /* Sleep until something happens. configPRE_SLEEP_PROCESSING() can + set its parameter to 0 to indicate that its implementation contains + its own wait for interrupt or wait for event instruction, and so wfi + should not be executed again. However, the original expected idle + time variable must remain unmodified, so a copy is taken. */ + xModifiableIdleTime = xExpectedIdleTime; + configPRE_SLEEP_PROCESSING( &xModifiableIdleTime ); + if( xModifiableIdleTime > 0 ) + { + __asm volatile( "dsb" ::: "memory" ); + __asm volatile( "wfi" ); + __asm volatile( "isb" ); + } + configPOST_SLEEP_PROCESSING( &xExpectedIdleTime ); + + /* Re-enable interrupts to allow the interrupt that brought the MCU + out of sleep mode to execute immediately. see comments above + __disable_interrupt() call above. */ + __asm volatile( "cpsie i" ::: "memory" ); + __asm volatile( "dsb" ); + __asm volatile( "isb" ); + + /* Disable interrupts again because the clock is about to be stopped + and interrupts that execute while the clock is stopped will increase + any slippage between the time maintained by the RTOS and calendar + time. */ + __asm volatile( "cpsid i" ::: "memory" ); + __asm volatile( "dsb" ); + __asm volatile( "isb" ); + + /* Disable the SysTick clock without reading the + portNVIC_SYSTICK_CTRL_REG register to ensure the + portNVIC_SYSTICK_COUNT_FLAG_BIT is not cleared if it is set. Again, + the time the SysTick is stopped for is accounted for as best it can + be, but using the tickless mode will inevitably result in some tiny + drift of the time maintained by the kernel with respect to calendar + time*/ + portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT ); + + /* Determine if the SysTick clock has already counted to zero and + been set back to the current reload value (the reload back being + correct for the entire expected idle time) or if the SysTick is yet + to count to zero (in which case an interrupt other than the SysTick + must have brought the system out of sleep mode). */ + if( ( portNVIC_SYSTICK_CTRL_REG & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 ) + { + uint32_t ulCalculatedLoadValue; + + /* The tick interrupt is already pending, and the SysTick count + reloaded with ulReloadValue. Reset the + portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick + period. */ + ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG ); + + /* Don't allow a tiny value, or values that have somehow + underflowed because the post sleep hook did something + that took too long. */ + if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) ) + { + ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ); + } + + portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue; + + /* As the pending tick will be processed as soon as this + function exits, the tick value maintained by the tick is stepped + forward by one less than the time spent waiting. */ + ulCompleteTickPeriods = xExpectedIdleTime - 1UL; + } + else + { + /* Something other than the tick interrupt ended the sleep. + Work out how long the sleep lasted rounded to complete tick + periods (not the ulReload value which accounted for part + ticks). */ + ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG; + + /* How many complete tick periods passed while the processor + was waiting? */ + ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick; + + /* The reload value is set to whatever fraction of a single tick + period remains. */ + portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements; + } + + /* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG + again, then set portNVIC_SYSTICK_LOAD_REG back to its standard + value. */ + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT; + vTaskStepTick( ulCompleteTickPeriods ); + portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL; + + /* Exit with interrpts enabled. */ + __asm volatile( "cpsie i" ::: "memory" ); + } + } + +#endif /* configUSE_TICKLESS_IDLE */ +/*-----------------------------------------------------------*/ + +/* + * Setup the systick timer to generate the tick interrupts at the required + * frequency. + */ +__attribute__(( weak )) void vPortSetupTimerInterrupt( void ) +{ + /* Calculate the constants required to configure the tick interrupt. */ + #if( configUSE_TICKLESS_IDLE == 1 ) + { + ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ); + xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick; + ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ ); + } + #endif /* configUSE_TICKLESS_IDLE */ + + /* Stop and clear the SysTick. */ + portNVIC_SYSTICK_CTRL_REG = 0UL; + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + + /* Configure SysTick to interrupt at the requested rate. */ + portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL; + portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT ); +} +/*-----------------------------------------------------------*/ + +#if( configASSERT_DEFINED == 1 ) + + void vPortValidateInterruptPriority( void ) + { + uint32_t ulCurrentInterrupt; + uint8_t ucCurrentPriority; + + /* Obtain the number of the currently executing interrupt. */ + __asm volatile( "mrs %0, ipsr" : "=r"( ulCurrentInterrupt ) :: "memory" ); + + /* Is the interrupt number a user defined interrupt? */ + if( ulCurrentInterrupt >= portFIRST_USER_INTERRUPT_NUMBER ) + { + /* Look up the interrupt's priority. */ + ucCurrentPriority = pcInterruptPriorityRegisters[ ulCurrentInterrupt ]; + + /* The following assertion will fail if a service routine (ISR) for + an interrupt that has been assigned a priority above + configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API + function. ISR safe FreeRTOS API functions must *only* be called + from interrupts that have been assigned a priority at or below + configMAX_SYSCALL_INTERRUPT_PRIORITY. + + Numerically low interrupt priority numbers represent logically high + interrupt priorities, therefore the priority of the interrupt must + be set to a value equal to or numerically *higher* than + configMAX_SYSCALL_INTERRUPT_PRIORITY. + + Interrupts that use the FreeRTOS API must not be left at their + default priority of zero as that is the highest possible priority, + which is guaranteed to be above configMAX_SYSCALL_INTERRUPT_PRIORITY, + and therefore also guaranteed to be invalid. + + FreeRTOS maintains separate thread and ISR API functions to ensure + interrupt entry is as fast and simple as possible. + + The following links provide detailed information: + http://www.freertos.org/RTOS-Cortex-M3-M4.html + http://www.freertos.org/FAQHelp.html */ + configASSERT( ucCurrentPriority >= ucMaxSysCallPriority ); + } + + /* Priority grouping: The interrupt controller (NVIC) allows the bits + that define each interrupt's priority to be split between bits that + define the interrupt's pre-emption priority bits and bits that define + the interrupt's sub-priority. For simplicity all bits must be defined + to be pre-emption priority bits. The following assertion will fail if + this is not the case (if some bits represent a sub-priority). + + If the application only uses CMSIS libraries for interrupt + configuration then the correct setting can be achieved on all Cortex-M + devices by calling NVIC_SetPriorityGrouping( 0 ); before starting the + scheduler. Note however that some vendor specific peripheral libraries + assume a non-zero priority group setting, in which cases using a value + of zero will result in unpredictable behaviour. */ + configASSERT( ( portAIRCR_REG & portPRIORITY_GROUP_MASK ) <= ulMaxPRIGROUPValue ); + } + +#endif /* configASSERT_DEFINED */ + + + + + + + + + + + + + + + + + + + + +
diff --git a/Source/portable/GCC/ARM_CM3/portmacro.h b/Source/portable/GCC/ARM_CM3/portmacro.h new file mode 100644 index 0000000..77a5d27 --- /dev/null +++ b/Source/portable/GCC/ARM_CM3/portmacro.h
@@ -0,0 +1,242 @@ +/* + * FreeRTOS Kernel V10.0.1 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef PORTMACRO_H +#define PORTMACRO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/*----------------------------------------------------------- + * Port specific definitions. + * + * The settings in this file configure FreeRTOS correctly for the + * given hardware and compiler. + * + * These settings should not be altered. + *----------------------------------------------------------- + */ + +/* Type definitions. */ +#define portCHAR char +#define portFLOAT float +#define portDOUBLE double +#define portLONG long +#define portSHORT short +#define portSTACK_TYPE uint32_t +#define portBASE_TYPE long + +typedef portSTACK_TYPE StackType_t; +typedef long BaseType_t; +typedef unsigned long UBaseType_t; + +#if( configUSE_16_BIT_TICKS == 1 ) + typedef uint16_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffff +#else + typedef uint32_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffffffffUL + + /* 32-bit tick type on a 32-bit architecture, so reads of the tick count do + not need to be guarded with a critical section. */ + #define portTICK_TYPE_IS_ATOMIC 1 +#endif +/*-----------------------------------------------------------*/ + +/* Architecture specifics. */ +#define portSTACK_GROWTH ( -1 ) +#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ ) +#define portBYTE_ALIGNMENT 8 +/*-----------------------------------------------------------*/ + +/* Scheduler utilities. */ +#define portYIELD() \ +{ \ + /* Set a PendSV to request a context switch. */ \ + portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; \ + \ + /* Barriers are normally not required but do ensure the code is completely \ + within the specified behaviour for the architecture. */ \ + __asm volatile( "dsb" ::: "memory" ); \ + __asm volatile( "isb" ); \ +} + +#define portNVIC_INT_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000ed04 ) ) +#define portNVIC_PENDSVSET_BIT ( 1UL << 28UL ) +#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired != pdFALSE ) portYIELD() +#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x ) +/*-----------------------------------------------------------*/ + +/* Critical section management. */ +extern void vPortEnterCritical( void ); +extern void vPortExitCritical( void ); +#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortRaiseBASEPRI() +#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) vPortSetBASEPRI(x) +#define portDISABLE_INTERRUPTS() vPortRaiseBASEPRI() +#define portENABLE_INTERRUPTS() vPortSetBASEPRI(0) +#define portENTER_CRITICAL() vPortEnterCritical() +#define portEXIT_CRITICAL() vPortExitCritical() + +/*-----------------------------------------------------------*/ + +/* Task function macros as described on the FreeRTOS.org WEB site. These are +not necessary for to use this port. They are defined so the common demo files +(which build with all the ports) will build. */ +#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters ) +#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters ) +/*-----------------------------------------------------------*/ + +/* Tickless idle/low power functionality. */ +#ifndef portSUPPRESS_TICKS_AND_SLEEP + extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime ); + #define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime ) +#endif +/*-----------------------------------------------------------*/ + +/* Architecture specific optimisations. */ +#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION + #define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 +#endif + +#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1 + + /* Generic helper function. */ + __attribute__( ( always_inline ) ) static inline uint8_t ucPortCountLeadingZeros( uint32_t ulBitmap ) + { + uint8_t ucReturn; + + __asm volatile ( "clz %0, %1" : "=r" ( ucReturn ) : "r" ( ulBitmap ) : "memory" ); + return ucReturn; + } + + /* Check the configuration. */ + #if( configMAX_PRIORITIES > 32 ) + #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice. + #endif + + /* Store/clear the ready priorities in a bit map. */ + #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) ) + #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) ) + + /*-----------------------------------------------------------*/ + + #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) ucPortCountLeadingZeros( ( uxReadyPriorities ) ) ) + +#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */ + +/*-----------------------------------------------------------*/ + +#ifdef configASSERT + void vPortValidateInterruptPriority( void ); + #define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() vPortValidateInterruptPriority() +#endif + +/* portNOP() is not required by this port. */ +#define portNOP() + +#define portINLINE __inline + +#ifndef portFORCE_INLINE + #define portFORCE_INLINE inline __attribute__(( always_inline)) +#endif + +portFORCE_INLINE static BaseType_t xPortIsInsideInterrupt( void ) +{ +uint32_t ulCurrentInterrupt; +BaseType_t xReturn; + + /* Obtain the number of the currently executing interrupt. */ + __asm volatile( "mrs %0, ipsr" : "=r"( ulCurrentInterrupt ) :: "memory" ); + + if( ulCurrentInterrupt == 0 ) + { + xReturn = pdFALSE; + } + else + { + xReturn = pdTRUE; + } + + return xReturn; +} + +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static void vPortRaiseBASEPRI( void ) +{ +uint32_t ulNewBASEPRI; + + __asm volatile + ( + " mov %0, %1 \n" \ + " msr basepri, %0 \n" \ + " isb \n" \ + " dsb \n" \ + :"=r" (ulNewBASEPRI) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) : "memory" + ); +} + +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static uint32_t ulPortRaiseBASEPRI( void ) +{ +uint32_t ulOriginalBASEPRI, ulNewBASEPRI; + + __asm volatile + ( + " mrs %0, basepri \n" \ + " mov %1, %2 \n" \ + " msr basepri, %1 \n" \ + " isb \n" \ + " dsb \n" \ + :"=r" (ulOriginalBASEPRI), "=r" (ulNewBASEPRI) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) : "memory" + ); + + /* This return will not be reached but is necessary to prevent compiler + warnings. */ + return ulOriginalBASEPRI; +} +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static void vPortSetBASEPRI( uint32_t ulNewMaskValue ) +{ + __asm volatile + ( + " msr basepri, %0 " :: "r" ( ulNewMaskValue ) : "memory" + ); +} +/*-----------------------------------------------------------*/ + + +#ifdef __cplusplus +} +#endif + +#endif /* PORTMACRO_H */ +
diff --git a/Source/portable/GCC/ARM_CM3_MPU/port.c b/Source/portable/GCC/ARM_CM3_MPU/port.c new file mode 100644 index 0000000..39cfbfc --- /dev/null +++ b/Source/portable/GCC/ARM_CM3_MPU/port.c
@@ -0,0 +1,763 @@ +/* + * FreeRTOS Kernel V10.0.1 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/*----------------------------------------------------------- + * Implementation of functions defined in portable.h for the ARM CM3 port. + *----------------------------------------------------------*/ + +/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining +all the API functions to use the MPU wrappers. That should only be done when +task.h is included from an application file. */ +#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE + +/* Scheduler includes. */ +#include "FreeRTOS.h" +#include "task.h" + +#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE + +#ifndef configSYSTICK_CLOCK_HZ + #define configSYSTICK_CLOCK_HZ configCPU_CLOCK_HZ + /* Ensure the SysTick is clocked at the same frequency as the core. */ + #define portNVIC_SYSTICK_CLK ( 1UL << 2UL ) +#else + /* The way the SysTick is clocked is not modified in case it is not the same + as the core. */ + #define portNVIC_SYSTICK_CLK ( 0 ) +#endif + +/* Constants required to access and manipulate the NVIC. */ +#define portNVIC_SYSTICK_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000e010 ) ) +#define portNVIC_SYSTICK_LOAD_REG ( * ( ( volatile uint32_t * ) 0xe000e014 ) ) +#define portNVIC_SYSTICK_CURRENT_VALUE_REG ( * ( ( volatile uint32_t * ) 0xe000e018 ) ) +#define portNVIC_SYSPRI2_REG ( * ( ( volatile uint32_t * ) 0xe000ed20 ) ) +#define portNVIC_SYSPRI1_REG ( * ( ( volatile uint32_t * ) 0xe000ed1c ) ) +#define portNVIC_SYS_CTRL_STATE_REG ( * ( ( volatile uint32_t * ) 0xe000ed24 ) ) +#define portNVIC_MEM_FAULT_ENABLE ( 1UL << 16UL ) + +/* Constants required to access and manipulate the MPU. */ +#define portMPU_TYPE_REG ( * ( ( volatile uint32_t * ) 0xe000ed90 ) ) +#define portMPU_REGION_BASE_ADDRESS_REG ( * ( ( volatile uint32_t * ) 0xe000ed9C ) ) +#define portMPU_REGION_ATTRIBUTE_REG ( * ( ( volatile uint32_t * ) 0xe000edA0 ) ) +#define portMPU_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000ed94 ) ) +#define portEXPECTED_MPU_TYPE_VALUE ( 8UL << 8UL ) /* 8 regions, unified. */ +#define portMPU_ENABLE ( 0x01UL ) +#define portMPU_BACKGROUND_ENABLE ( 1UL << 2UL ) +#define portPRIVILEGED_EXECUTION_START_ADDRESS ( 0UL ) +#define portMPU_REGION_VALID ( 0x10UL ) +#define portMPU_REGION_ENABLE ( 0x01UL ) +#define portPERIPHERALS_START_ADDRESS 0x40000000UL +#define portPERIPHERALS_END_ADDRESS 0x5FFFFFFFUL + +/* Constants required to access and manipulate the SysTick. */ +#define portNVIC_SYSTICK_INT ( 0x00000002UL ) +#define portNVIC_SYSTICK_ENABLE ( 0x00000001UL ) +#define portNVIC_PENDSV_PRI ( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 16UL ) +#define portNVIC_SYSTICK_PRI ( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 24UL ) +#define portNVIC_SVC_PRI ( ( ( uint32_t ) configMAX_SYSCALL_INTERRUPT_PRIORITY - 1UL ) << 24UL ) + +/* Constants required to set up the initial stack. */ +#define portINITIAL_XPSR ( 0x01000000 ) +#define portINITIAL_CONTROL_IF_UNPRIVILEGED ( 0x03 ) +#define portINITIAL_CONTROL_IF_PRIVILEGED ( 0x02 ) + +/* Constants required to check the validity of an interrupt priority. */ +#define portFIRST_USER_INTERRUPT_NUMBER ( 16 ) +#define portNVIC_IP_REGISTERS_OFFSET_16 ( 0xE000E3F0 ) +#define portAIRCR_REG ( * ( ( volatile uint32_t * ) 0xE000ED0C ) ) +#define portMAX_8_BIT_VALUE ( ( uint8_t ) 0xff ) +#define portTOP_BIT_OF_BYTE ( ( uint8_t ) 0x80 ) +#define portMAX_PRIGROUP_BITS ( ( uint8_t ) 7 ) +#define portPRIORITY_GROUP_MASK ( 0x07UL << 8UL ) +#define portPRIGROUP_SHIFT ( 8UL ) + +/* Offsets in the stack to the parameters when inside the SVC handler. */ +#define portOFFSET_TO_PC ( 6 ) + +/* For strict compliance with the Cortex-M spec the task start address should +have bit-0 clear, as it is loaded into the PC on exit from an ISR. */ +#define portSTART_ADDRESS_MASK ( ( StackType_t ) 0xfffffffeUL ) + +/* + * Configure a number of standard MPU regions that are used by all tasks. + */ +static void prvSetupMPU( void ) PRIVILEGED_FUNCTION; + +/* + * Return the smallest MPU region size that a given number of bytes will fit + * into. The region size is returned as the value that should be programmed + * into the region attribute register for that region. + */ +static uint32_t prvGetMPURegionSizeSetting( uint32_t ulActualSizeInBytes ) PRIVILEGED_FUNCTION; + +/* + * Checks to see if being called from the context of an unprivileged task, and + * if so raises the privilege level and returns false - otherwise does nothing + * other than return true. + */ +BaseType_t xPortRaisePrivilege( void ) __attribute__(( naked )); + +/* + * Setup the timer to generate the tick interrupts. The implementation in this + * file is weak to allow application writers to change the timer used to + * generate the tick interrupt. + */ +void vPortSetupTimerInterrupt( void ); + +/* + * Standard FreeRTOS exception handlers. + */ +void xPortPendSVHandler( void ) __attribute__ (( naked )) PRIVILEGED_FUNCTION; +void xPortSysTickHandler( void ) __attribute__ ((optimize("3"))) PRIVILEGED_FUNCTION; +void vPortSVCHandler( void ) __attribute__ (( naked )) PRIVILEGED_FUNCTION; + +/* + * Starts the scheduler by restoring the context of the first task to run. + */ +static void prvRestoreContextOfFirstTask( void ) __attribute__(( naked )) PRIVILEGED_FUNCTION; + +/* + * C portion of the SVC handler. The SVC handler is split between an asm entry + * and a C wrapper for simplicity of coding and maintenance. + */ +static void prvSVCHandler( uint32_t *pulRegisters ) __attribute__(( noinline )) PRIVILEGED_FUNCTION; + +/*-----------------------------------------------------------*/ + +/* Each task maintains its own interrupt status in the critical nesting +variable. Note this is not saved as part of the task context as context +switches can only occur when uxCriticalNesting is zero. */ +static UBaseType_t uxCriticalNesting = 0xaaaaaaaa; + +/* + * Used by the portASSERT_IF_INTERRUPT_PRIORITY_INVALID() macro to ensure + * FreeRTOS API functions are not called from interrupts that have been assigned + * a priority above configMAX_SYSCALL_INTERRUPT_PRIORITY. + */ +#if ( configASSERT_DEFINED == 1 ) + static uint8_t ucMaxSysCallPriority = 0; + static uint32_t ulMaxPRIGROUPValue = 0; + static const volatile uint8_t * const pcInterruptPriorityRegisters = ( const volatile uint8_t * const ) portNVIC_IP_REGISTERS_OFFSET_16; +#endif /* configASSERT_DEFINED */ + +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters, BaseType_t xRunPrivileged ) +{ + /* Simulate the stack frame as it would be created by a context switch + interrupt. */ + pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */ + *pxTopOfStack = portINITIAL_XPSR; /* xPSR */ + pxTopOfStack--; + *pxTopOfStack = ( ( StackType_t ) pxCode ) & portSTART_ADDRESS_MASK; /* PC */ + pxTopOfStack--; + *pxTopOfStack = 0; /* LR */ + pxTopOfStack -= 5; /* R12, R3, R2 and R1. */ + *pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */ + pxTopOfStack -= 9; /* R11, R10, R9, R8, R7, R6, R5 and R4. */ + + if( xRunPrivileged == pdTRUE ) + { + *pxTopOfStack = portINITIAL_CONTROL_IF_PRIVILEGED; + } + else + { + *pxTopOfStack = portINITIAL_CONTROL_IF_UNPRIVILEGED; + } + + return pxTopOfStack; +} +/*-----------------------------------------------------------*/ + +void vPortSVCHandler( void ) +{ + /* Assumes psp was in use. */ + __asm volatile + ( + #ifndef USE_PROCESS_STACK /* Code should not be required if a main() is using the process stack. */ + " tst lr, #4 \n" + " ite eq \n" + " mrseq r0, msp \n" + " mrsne r0, psp \n" + #else + " mrs r0, psp \n" + #endif + " b %0 \n" + ::"i"(prvSVCHandler):"r0", "memory" + ); +} +/*-----------------------------------------------------------*/ + +static void prvSVCHandler( uint32_t *pulParam ) +{ +uint8_t ucSVCNumber; + + /* The stack contains: r0, r1, r2, r3, r12, r14, the return address and + xPSR. The first argument (r0) is pulParam[ 0 ]. */ + ucSVCNumber = ( ( uint8_t * ) pulParam[ portOFFSET_TO_PC ] )[ -2 ]; + switch( ucSVCNumber ) + { + case portSVC_START_SCHEDULER : portNVIC_SYSPRI1_REG |= portNVIC_SVC_PRI; + prvRestoreContextOfFirstTask(); + break; + + case portSVC_YIELD : portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; + /* Barriers are normally not required + but do ensure the code is completely + within the specified behaviour for the + architecture. */ + __asm volatile( "dsb" ::: "memory" ); + __asm volatile( "isb" ); + + break; + + case portSVC_RAISE_PRIVILEGE : __asm volatile + ( + " mrs r1, control \n" /* Obtain current control value. */ + " bic r1, #1 \n" /* Set privilege bit. */ + " msr control, r1 \n" /* Write back new control value. */ + ::: "r1", "memory" + ); + break; + + default : /* Unknown SVC call. */ + break; + } +} +/*-----------------------------------------------------------*/ + +static void prvRestoreContextOfFirstTask( void ) +{ + __asm volatile + ( + " ldr r0, =0xE000ED08 \n" /* Use the NVIC offset register to locate the stack. */ + " ldr r0, [r0] \n" + " ldr r0, [r0] \n" + " msr msp, r0 \n" /* Set the msp back to the start of the stack. */ + " ldr r3, pxCurrentTCBConst2 \n" /* Restore the context. */ + " ldr r1, [r3] \n" + " ldr r0, [r1] \n" /* The first item in the TCB is the task top of stack. */ + " add r1, r1, #4 \n" /* Move onto the second item in the TCB... */ + " ldr r2, =0xe000ed9c \n" /* Region Base Address register. */ + " ldmia r1!, {r4-r11} \n" /* Read 4 sets of MPU registers. */ + " stmia r2!, {r4-r11} \n" /* Write 4 sets of MPU registers. */ + " ldmia r0!, {r3, r4-r11} \n" /* Pop the registers that are not automatically saved on exception entry. */ + " msr control, r3 \n" + " msr psp, r0 \n" /* Restore the task stack pointer. */ + " mov r0, #0 \n" + " msr basepri, r0 \n" + " ldr r14, =0xfffffffd \n" /* Load exec return code. */ + " bx r14 \n" + " \n" + " .align 4 \n" + "pxCurrentTCBConst2: .word pxCurrentTCB \n" + ); +} +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +BaseType_t xPortStartScheduler( void ) +{ + /* configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0. See + http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html */ + configASSERT( ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) ); + + #if( configASSERT_DEFINED == 1 ) + { + volatile uint32_t ulOriginalPriority; + volatile uint8_t * const pucFirstUserPriorityRegister = ( volatile uint8_t * const ) ( portNVIC_IP_REGISTERS_OFFSET_16 + portFIRST_USER_INTERRUPT_NUMBER ); + volatile uint8_t ucMaxPriorityValue; + + /* Determine the maximum priority from which ISR safe FreeRTOS API + functions can be called. ISR safe functions are those that end in + "FromISR". FreeRTOS maintains separate thread and ISR API functions to + ensure interrupt entry is as fast and simple as possible. + + Save the interrupt priority value that is about to be clobbered. */ + ulOriginalPriority = *pucFirstUserPriorityRegister; + + /* Determine the number of priority bits available. First write to all + possible bits. */ + *pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE; + + /* Read the value back to see how many bits stuck. */ + ucMaxPriorityValue = *pucFirstUserPriorityRegister; + + /* Use the same mask on the maximum system call priority. */ + ucMaxSysCallPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY & ucMaxPriorityValue; + + /* Calculate the maximum acceptable priority group value for the number + of bits read back. */ + ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS; + while( ( ucMaxPriorityValue & portTOP_BIT_OF_BYTE ) == portTOP_BIT_OF_BYTE ) + { + ulMaxPRIGROUPValue--; + ucMaxPriorityValue <<= ( uint8_t ) 0x01; + } + + #ifdef __NVIC_PRIO_BITS + { + /* Check the CMSIS configuration that defines the number of + priority bits matches the number of priority bits actually queried + from the hardware. */ + configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == __NVIC_PRIO_BITS ); + } + #endif + + #ifdef configPRIO_BITS + { + /* Check the FreeRTOS configuration that defines the number of + priority bits matches the number of priority bits actually queried + from the hardware. */ + configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == configPRIO_BITS ); + } + #endif + + /* Shift the priority group value back to its position within the AIRCR + register. */ + ulMaxPRIGROUPValue <<= portPRIGROUP_SHIFT; + ulMaxPRIGROUPValue &= portPRIORITY_GROUP_MASK; + + /* Restore the clobbered interrupt priority register to its original + value. */ + *pucFirstUserPriorityRegister = ulOriginalPriority; + } + #endif /* conifgASSERT_DEFINED */ + + /* Make PendSV and SysTick the same priority as the kernel, and the SVC + handler higher priority so it can be used to exit a critical section (where + lower priorities are masked). */ + portNVIC_SYSPRI2_REG |= portNVIC_PENDSV_PRI; + portNVIC_SYSPRI2_REG |= portNVIC_SYSTICK_PRI; + + /* Configure the regions in the MPU that are common to all tasks. */ + prvSetupMPU(); + + /* Start the timer that generates the tick ISR. Interrupts are disabled + here already. */ + vPortSetupTimerInterrupt(); + + /* Initialise the critical nesting count ready for the first task. */ + uxCriticalNesting = 0; + + /* Start the first task. */ + __asm volatile( + " ldr r0, =0xE000ED08 \n" /* Use the NVIC offset register to locate the stack. */ + " ldr r0, [r0] \n" + " ldr r0, [r0] \n" + " msr msp, r0 \n" /* Set the msp back to the start of the stack. */ + " cpsie i \n" /* Globally enable interrupts. */ + " cpsie f \n" + " dsb \n" + " isb \n" + " svc %0 \n" /* System call to start first task. */ + " nop \n" + :: "i" (portSVC_START_SCHEDULER) : "memory" ); + + /* Should not get here! */ + return 0; +} +/*-----------------------------------------------------------*/ + +void vPortEndScheduler( void ) +{ + /* Not implemented in ports where there is nothing to return to. + Artificially force an assert. */ + configASSERT( uxCriticalNesting == 1000UL ); +} +/*-----------------------------------------------------------*/ + +void vPortEnterCritical( void ) +{ +BaseType_t xRunningPrivileged = xPortRaisePrivilege(); + + portDISABLE_INTERRUPTS(); + uxCriticalNesting++; + + vPortResetPrivilege( xRunningPrivileged ); +} +/*-----------------------------------------------------------*/ + +void vPortExitCritical( void ) +{ +BaseType_t xRunningPrivileged = xPortRaisePrivilege(); + + configASSERT( uxCriticalNesting ); + uxCriticalNesting--; + if( uxCriticalNesting == 0 ) + { + portENABLE_INTERRUPTS(); + } + vPortResetPrivilege( xRunningPrivileged ); +} +/*-----------------------------------------------------------*/ + +void xPortPendSVHandler( void ) +{ + /* This is a naked function. */ + + __asm volatile + ( + " mrs r0, psp \n" + " \n" + " ldr r3, pxCurrentTCBConst \n" /* Get the location of the current TCB. */ + " ldr r2, [r3] \n" + " \n" + " mrs r1, control \n" + " stmdb r0!, {r1, r4-r11} \n" /* Save the remaining registers. */ + " str r0, [r2] \n" /* Save the new top of stack into the first member of the TCB. */ + " \n" + " stmdb sp!, {r3, r14} \n" + " mov r0, %0 \n" + " msr basepri, r0 \n" + " dsb \n" + " isb \n" + " bl vTaskSwitchContext \n" + " mov r0, #0 \n" + " msr basepri, r0 \n" + " ldmia sp!, {r3, r14} \n" + " \n" /* Restore the context. */ + " ldr r1, [r3] \n" + " ldr r0, [r1] \n" /* The first item in the TCB is the task top of stack. */ + " add r1, r1, #4 \n" /* Move onto the second item in the TCB... */ + " ldr r2, =0xe000ed9c \n" /* Region Base Address register. */ + " ldmia r1!, {r4-r11} \n" /* Read 4 sets of MPU registers. */ + " stmia r2!, {r4-r11} \n" /* Write 4 sets of MPU registers. */ + " ldmia r0!, {r3, r4-r11} \n" /* Pop the registers that are not automatically saved on exception entry. */ + " msr control, r3 \n" + " \n" + " msr psp, r0 \n" + " bx r14 \n" + " \n" + " .align 4 \n" + "pxCurrentTCBConst: .word pxCurrentTCB \n" + ::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY) + ); +} +/*-----------------------------------------------------------*/ + +void xPortSysTickHandler( void ) +{ +uint32_t ulDummy; + + ulDummy = portSET_INTERRUPT_MASK_FROM_ISR(); + { + /* Increment the RTOS tick. */ + if( xTaskIncrementTick() != pdFALSE ) + { + /* Pend a context switch. */ + portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; + } + } + portCLEAR_INTERRUPT_MASK_FROM_ISR( ulDummy ); +} +/*-----------------------------------------------------------*/ + +/* + * Setup the systick timer to generate the tick interrupts at the required + * frequency. + */ +__attribute__(( weak )) void vPortSetupTimerInterrupt( void ) +{ + /* Stop and clear the SysTick. */ + portNVIC_SYSTICK_CTRL_REG = 0UL; + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + + /* Configure SysTick to interrupt at the requested rate. */ + portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL; + portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK | portNVIC_SYSTICK_INT | portNVIC_SYSTICK_ENABLE ); +} +/*-----------------------------------------------------------*/ + +static void prvSetupMPU( void ) +{ +extern uint32_t __privileged_functions_end__[]; +extern uint32_t __FLASH_segment_start__[]; +extern uint32_t __FLASH_segment_end__[]; +extern uint32_t __privileged_data_start__[]; +extern uint32_t __privileged_data_end__[]; + + /* Check the expected MPU is present. */ + if( portMPU_TYPE_REG == portEXPECTED_MPU_TYPE_VALUE ) + { + /* First setup the entire flash for unprivileged read only access. */ + portMPU_REGION_BASE_ADDRESS_REG = ( ( uint32_t ) __FLASH_segment_start__ ) | /* Base address. */ + ( portMPU_REGION_VALID ) | + ( portUNPRIVILEGED_FLASH_REGION ); + + portMPU_REGION_ATTRIBUTE_REG = ( portMPU_REGION_READ_ONLY ) | + ( portMPU_REGION_CACHEABLE_BUFFERABLE ) | + ( prvGetMPURegionSizeSetting( ( uint32_t ) __FLASH_segment_end__ - ( uint32_t ) __FLASH_segment_start__ ) ) | + ( portMPU_REGION_ENABLE ); + + /* Setup the first 16K for privileged only access (even though less + than 10K is actually being used). This is where the kernel code is + placed. */ + portMPU_REGION_BASE_ADDRESS_REG = ( ( uint32_t ) __FLASH_segment_start__ ) | /* Base address. */ + ( portMPU_REGION_VALID ) | + ( portPRIVILEGED_FLASH_REGION ); + + portMPU_REGION_ATTRIBUTE_REG = ( portMPU_REGION_PRIVILEGED_READ_ONLY ) | + ( portMPU_REGION_CACHEABLE_BUFFERABLE ) | + ( prvGetMPURegionSizeSetting( ( uint32_t ) __privileged_functions_end__ - ( uint32_t ) __FLASH_segment_start__ ) ) | + ( portMPU_REGION_ENABLE ); + + /* Setup the privileged data RAM region. This is where the kernel data + is placed. */ + portMPU_REGION_BASE_ADDRESS_REG = ( ( uint32_t ) __privileged_data_start__ ) | /* Base address. */ + ( portMPU_REGION_VALID ) | + ( portPRIVILEGED_RAM_REGION ); + + portMPU_REGION_ATTRIBUTE_REG = ( portMPU_REGION_PRIVILEGED_READ_WRITE ) | + ( portMPU_REGION_CACHEABLE_BUFFERABLE ) | + prvGetMPURegionSizeSetting( ( uint32_t ) __privileged_data_end__ - ( uint32_t ) __privileged_data_start__ ) | + ( portMPU_REGION_ENABLE ); + + /* By default allow everything to access the general peripherals. The + system peripherals and registers are protected. */ + portMPU_REGION_BASE_ADDRESS_REG = ( portPERIPHERALS_START_ADDRESS ) | + ( portMPU_REGION_VALID ) | + ( portGENERAL_PERIPHERALS_REGION ); + + portMPU_REGION_ATTRIBUTE_REG = ( portMPU_REGION_READ_WRITE | portMPU_REGION_EXECUTE_NEVER ) | + ( prvGetMPURegionSizeSetting( portPERIPHERALS_END_ADDRESS - portPERIPHERALS_START_ADDRESS ) ) | + ( portMPU_REGION_ENABLE ); + + /* Enable the memory fault exception. */ + portNVIC_SYS_CTRL_STATE_REG |= portNVIC_MEM_FAULT_ENABLE; + + /* Enable the MPU with the background region configured. */ + portMPU_CTRL_REG |= ( portMPU_ENABLE | portMPU_BACKGROUND_ENABLE ); + } +} +/*-----------------------------------------------------------*/ + +static uint32_t prvGetMPURegionSizeSetting( uint32_t ulActualSizeInBytes ) +{ +uint32_t ulRegionSize, ulReturnValue = 4; + + /* 32 is the smallest region size, 31 is the largest valid value for + ulReturnValue. */ + for( ulRegionSize = 32UL; ulReturnValue < 31UL; ( ulRegionSize <<= 1UL ) ) + { + if( ulActualSizeInBytes <= ulRegionSize ) + { + break; + } + else + { + ulReturnValue++; + } + } + + /* Shift the code by one before returning so it can be written directly + into the the correct bit position of the attribute register. */ + return ( ulReturnValue << 1UL ); +} +/*-----------------------------------------------------------*/ + +BaseType_t xPortRaisePrivilege( void ) +{ + __asm volatile + ( + " mrs r0, control \n" + " tst r0, #1 \n" /* Is the task running privileged? */ + " itte ne \n" + " movne r0, #0 \n" /* CONTROL[0]!=0, return false. */ + " svcne %0 \n" /* Switch to privileged. */ + " moveq r0, #1 \n" /* CONTROL[0]==0, return true. */ + " bx lr \n" + :: "i" (portSVC_RAISE_PRIVILEGE) : "r0", "memory" + ); + + return 0; +} +/*-----------------------------------------------------------*/ + +void vPortStoreTaskMPUSettings( xMPU_SETTINGS *xMPUSettings, const struct xMEMORY_REGION * const xRegions, StackType_t *pxBottomOfStack, uint32_t ulStackDepth ) +{ +extern uint32_t __SRAM_segment_start__[]; +extern uint32_t __SRAM_segment_end__[]; +extern uint32_t __privileged_data_start__[]; +extern uint32_t __privileged_data_end__[]; +int32_t lIndex; +uint32_t ul; + + if( xRegions == NULL ) + { + /* No MPU regions are specified so allow access to all RAM. */ + xMPUSettings->xRegion[ 0 ].ulRegionBaseAddress = + ( ( uint32_t ) __SRAM_segment_start__ ) | /* Base address. */ + ( portMPU_REGION_VALID ) | + ( portSTACK_REGION ); + + xMPUSettings->xRegion[ 0 ].ulRegionAttribute = + ( portMPU_REGION_READ_WRITE ) | + ( portMPU_REGION_CACHEABLE_BUFFERABLE ) | + ( prvGetMPURegionSizeSetting( ( uint32_t ) __SRAM_segment_end__ - ( uint32_t ) __SRAM_segment_start__ ) ) | + ( portMPU_REGION_ENABLE ); + + /* Re-instate the privileged only RAM region as xRegion[ 0 ] will have + just removed the privileged only parameters. */ + xMPUSettings->xRegion[ 1 ].ulRegionBaseAddress = + ( ( uint32_t ) __privileged_data_start__ ) | /* Base address. */ + ( portMPU_REGION_VALID ) | + ( portSTACK_REGION + 1 ); + + xMPUSettings->xRegion[ 1 ].ulRegionAttribute = + ( portMPU_REGION_PRIVILEGED_READ_WRITE ) | + ( portMPU_REGION_CACHEABLE_BUFFERABLE ) | + prvGetMPURegionSizeSetting( ( uint32_t ) __privileged_data_end__ - ( uint32_t ) __privileged_data_start__ ) | + ( portMPU_REGION_ENABLE ); + + /* Invalidate all other regions. */ + for( ul = 2; ul <= portNUM_CONFIGURABLE_REGIONS; ul++ ) + { + xMPUSettings->xRegion[ ul ].ulRegionBaseAddress = ( portSTACK_REGION + ul ) | portMPU_REGION_VALID; + xMPUSettings->xRegion[ ul ].ulRegionAttribute = 0UL; + } + } + else + { + /* This function is called automatically when the task is created - in + which case the stack region parameters will be valid. At all other + times the stack parameters will not be valid and it is assumed that the + stack region has already been configured. */ + if( ulStackDepth > 0 ) + { + /* Define the region that allows access to the stack. */ + xMPUSettings->xRegion[ 0 ].ulRegionBaseAddress = + ( ( uint32_t ) pxBottomOfStack ) | + ( portMPU_REGION_VALID ) | + ( portSTACK_REGION ); /* Region number. */ + + xMPUSettings->xRegion[ 0 ].ulRegionAttribute = + ( portMPU_REGION_READ_WRITE ) | /* Read and write. */ + ( prvGetMPURegionSizeSetting( ulStackDepth * ( uint32_t ) sizeof( StackType_t ) ) ) | + ( portMPU_REGION_CACHEABLE_BUFFERABLE ) | + ( portMPU_REGION_ENABLE ); + } + + lIndex = 0; + + for( ul = 1; ul <= portNUM_CONFIGURABLE_REGIONS; ul++ ) + { + if( ( xRegions[ lIndex ] ).ulLengthInBytes > 0UL ) + { + /* Translate the generic region definition contained in + xRegions into the CM3 specific MPU settings that are then + stored in xMPUSettings. */ + xMPUSettings->xRegion[ ul ].ulRegionBaseAddress = + ( ( uint32_t ) xRegions[ lIndex ].pvBaseAddress ) | + ( portMPU_REGION_VALID ) | + ( portSTACK_REGION + ul ); /* Region number. */ + + xMPUSettings->xRegion[ ul ].ulRegionAttribute = + ( prvGetMPURegionSizeSetting( xRegions[ lIndex ].ulLengthInBytes ) ) | + ( xRegions[ lIndex ].ulParameters ) | + ( portMPU_REGION_ENABLE ); + } + else + { + /* Invalidate the region. */ + xMPUSettings->xRegion[ ul ].ulRegionBaseAddress = ( portSTACK_REGION + ul ) | portMPU_REGION_VALID; + xMPUSettings->xRegion[ ul ].ulRegionAttribute = 0UL; + } + + lIndex++; + } + } +} +/*-----------------------------------------------------------*/ + +#if( configASSERT_DEFINED == 1 ) + + void vPortValidateInterruptPriority( void ) + { + uint32_t ulCurrentInterrupt; + uint8_t ucCurrentPriority; + + /* Obtain the number of the currently executing interrupt. */ + __asm volatile( "mrs %0, ipsr" : "=r"( ulCurrentInterrupt ) :: "memory" ); + + /* Is the interrupt number a user defined interrupt? */ + if( ulCurrentInterrupt >= portFIRST_USER_INTERRUPT_NUMBER ) + { + /* Look up the interrupt's priority. */ + ucCurrentPriority = pcInterruptPriorityRegisters[ ulCurrentInterrupt ]; + + /* The following assertion will fail if a service routine (ISR) for + an interrupt that has been assigned a priority above + configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API + function. ISR safe FreeRTOS API functions must *only* be called + from interrupts that have been assigned a priority at or below + configMAX_SYSCALL_INTERRUPT_PRIORITY. + + Numerically low interrupt priority numbers represent logically high + interrupt priorities, therefore the priority of the interrupt must + be set to a value equal to or numerically *higher* than + configMAX_SYSCALL_INTERRUPT_PRIORITY. + + Interrupts that use the FreeRTOS API must not be left at their + default priority of zero as that is the highest possible priority, + which is guaranteed to be above configMAX_SYSCALL_INTERRUPT_PRIORITY, + and therefore also guaranteed to be invalid. + + FreeRTOS maintains separate thread and ISR API functions to ensure + interrupt entry is as fast and simple as possible. + + The following links provide detailed information: + http://www.freertos.org/RTOS-Cortex-M3-M4.html + http://www.freertos.org/FAQHelp.html */ + configASSERT( ucCurrentPriority >= ucMaxSysCallPriority ); + } + + /* Priority grouping: The interrupt controller (NVIC) allows the bits + that define each interrupt's priority to be split between bits that + define the interrupt's pre-emption priority bits and bits that define + the interrupt's sub-priority. For simplicity all bits must be defined + to be pre-emption priority bits. The following assertion will fail if + this is not the case (if some bits represent a sub-priority). + + If the application only uses CMSIS libraries for interrupt + configuration then the correct setting can be achieved on all Cortex-M + devices by calling NVIC_SetPriorityGrouping( 0 ); before starting the + scheduler. Note however that some vendor specific peripheral libraries + assume a non-zero priority group setting, in which cases using a value + of zero will result in unpredicable behaviour. */ + configASSERT( ( portAIRCR_REG & portPRIORITY_GROUP_MASK ) <= ulMaxPRIGROUPValue ); + } + +#endif /* configASSERT_DEFINED */ +/*-----------------------------------------------------------*/ + +
diff --git a/Source/portable/GCC/ARM_CM3_MPU/portmacro.h b/Source/portable/GCC/ARM_CM3_MPU/portmacro.h new file mode 100644 index 0000000..6057f1c --- /dev/null +++ b/Source/portable/GCC/ARM_CM3_MPU/portmacro.h
@@ -0,0 +1,290 @@ +/* + * FreeRTOS Kernel V10.0.1 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef PORTMACRO_H +#define PORTMACRO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/*----------------------------------------------------------- + * Port specific definitions. + * + * The settings in this file configure FreeRTOS correctly for the + * given hardware and compiler. + * + * These settings should not be altered. + *----------------------------------------------------------- + */ + +/* Type definitions. */ +#define portCHAR char +#define portFLOAT float +#define portDOUBLE double +#define portLONG long +#define portSHORT short +#define portSTACK_TYPE uint32_t +#define portBASE_TYPE long + +typedef portSTACK_TYPE StackType_t; +typedef long BaseType_t; +typedef unsigned long UBaseType_t; + +#if( configUSE_16_BIT_TICKS == 1 ) + typedef uint16_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffff +#else + typedef uint32_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffffffffUL + + /* 32-bit tick type on a 32-bit architecture, so reads of the tick count do + not need to be guarded with a critical section. */ + #define portTICK_TYPE_IS_ATOMIC 1 +#endif +/*-----------------------------------------------------------*/ + +/* MPU specific constants. */ +#define portUSING_MPU_WRAPPERS 1 +#define portPRIVILEGE_BIT ( 0x80000000UL ) + +#define portMPU_REGION_READ_WRITE ( 0x03UL << 24UL ) +#define portMPU_REGION_PRIVILEGED_READ_ONLY ( 0x05UL << 24UL ) +#define portMPU_REGION_READ_ONLY ( 0x06UL << 24UL ) +#define portMPU_REGION_PRIVILEGED_READ_WRITE ( 0x01UL << 24UL ) +#define portMPU_REGION_CACHEABLE_BUFFERABLE ( 0x07UL << 16UL ) +#define portMPU_REGION_EXECUTE_NEVER ( 0x01UL << 28UL ) + +#define portUNPRIVILEGED_FLASH_REGION ( 0UL ) +#define portPRIVILEGED_FLASH_REGION ( 1UL ) +#define portPRIVILEGED_RAM_REGION ( 2UL ) +#define portGENERAL_PERIPHERALS_REGION ( 3UL ) +#define portSTACK_REGION ( 4UL ) +#define portFIRST_CONFIGURABLE_REGION ( 5UL ) +#define portLAST_CONFIGURABLE_REGION ( 7UL ) +#define portNUM_CONFIGURABLE_REGIONS ( ( portLAST_CONFIGURABLE_REGION - portFIRST_CONFIGURABLE_REGION ) + 1 ) +#define portTOTAL_NUM_REGIONS ( portNUM_CONFIGURABLE_REGIONS + 1 ) /* Plus one to make space for the stack region. */ + +#define portSWITCH_TO_USER_MODE() __asm volatile ( " mrs r0, control \n orr r0, #1 \n msr control, r0 " ::: "r0", "memory" ) + +typedef struct MPU_REGION_REGISTERS +{ + uint32_t ulRegionBaseAddress; + uint32_t ulRegionAttribute; +} xMPU_REGION_REGISTERS; + +/* Plus 1 to create space for the stack region. */ +typedef struct MPU_SETTINGS +{ + xMPU_REGION_REGISTERS xRegion[ portTOTAL_NUM_REGIONS ]; +} xMPU_SETTINGS; + +/* Architecture specifics. */ +#define portSTACK_GROWTH ( -1 ) +#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ ) +#define portBYTE_ALIGNMENT 8 +/*-----------------------------------------------------------*/ + +/* SVC numbers for various services. */ +#define portSVC_START_SCHEDULER 0 +#define portSVC_YIELD 1 +#define portSVC_RAISE_PRIVILEGE 2 + +/* Scheduler utilities. */ + +#define portYIELD() __asm volatile ( " SVC %0 \n" :: "i" (portSVC_YIELD) : "memory" ) +#define portYIELD_WITHIN_API() \ +{ \ + /* Set a PendSV to request a context switch. */ \ + portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; \ + \ + /* Barriers are normally not required but do ensure the code is completely \ + within the specified behaviour for the architecture. */ \ + __asm volatile( "dsb" ::: "memory" ); \ + __asm volatile( "isb" ); \ +} + +#define portNVIC_INT_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000ed04 ) ) +#define portNVIC_PENDSVSET_BIT ( 1UL << 28UL ) +#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT +#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x ) +/*-----------------------------------------------------------*/ + +/* Critical section management. */ +extern void vPortEnterCritical( void ); +extern void vPortExitCritical( void ); +#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortRaiseBASEPRI() +#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) vPortSetBASEPRI(x) +#define portDISABLE_INTERRUPTS() vPortRaiseBASEPRI() +#define portENABLE_INTERRUPTS() vPortSetBASEPRI(0) +#define portENTER_CRITICAL() vPortEnterCritical() +#define portEXIT_CRITICAL() vPortExitCritical() + +/*-----------------------------------------------------------*/ + +/* Task function macros as described on the FreeRTOS.org WEB site. These are +not necessary for to use this port. They are defined so the common demo files +(which build with all the ports) will build. */ +#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters ) +#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters ) +/*-----------------------------------------------------------*/ + +/* Architecture specific optimisations. */ +#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION + #define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 +#endif + +#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1 + + /* Generic helper function. */ + __attribute__( ( always_inline ) ) static inline uint8_t ucPortCountLeadingZeros( uint32_t ulBitmap ) + { + uint8_t ucReturn; + + __asm volatile ( "clz %0, %1" : "=r" ( ucReturn ) : "r" ( ulBitmap ) : "memory" ); + return ucReturn; + } + + /* Check the configuration. */ + #if( configMAX_PRIORITIES > 32 ) + #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice. + #endif + + /* Store/clear the ready priorities in a bit map. */ + #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) ) + #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) ) + + /*-----------------------------------------------------------*/ + + #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) ucPortCountLeadingZeros( ( uxReadyPriorities ) ) ) + +#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */ + +/*-----------------------------------------------------------*/ + +#ifdef configASSERT + void vPortValidateInterruptPriority( void ); + #define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() vPortValidateInterruptPriority() +#endif + +/* portNOP() is not required by this port. */ +#define portNOP() + +#define portINLINE __inline + +#ifndef portFORCE_INLINE + #define portFORCE_INLINE inline __attribute__(( always_inline)) +#endif + +/* Set the privilege level to user mode if xRunningPrivileged is false. */ +portFORCE_INLINE static void vPortResetPrivilege( BaseType_t xRunningPrivileged ) +{ + if( xRunningPrivileged != pdTRUE ) + { + __asm volatile ( " mrs r0, control \n" \ + " orr r0, #1 \n" \ + " msr control, r0 \n" \ + :::"r0", "memory" ); + } +} +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static BaseType_t xPortIsInsideInterrupt( void ) +{ +uint32_t ulCurrentInterrupt; +BaseType_t xReturn; + + /* Obtain the number of the currently executing interrupt. */ + __asm volatile( "mrs %0, ipsr" : "=r"( ulCurrentInterrupt ) :: "memory" ); + + if( ulCurrentInterrupt == 0 ) + { + xReturn = pdFALSE; + } + else + { + xReturn = pdTRUE; + } + + return xReturn; +} + +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static void vPortRaiseBASEPRI( void ) +{ +uint32_t ulNewBASEPRI; + + __asm volatile + ( + " mov %0, %1 \n" \ + " msr basepri, %0 \n" \ + " isb \n" \ + " dsb \n" \ + :"=r" (ulNewBASEPRI) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) : "memory" + ); +} + +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static uint32_t ulPortRaiseBASEPRI( void ) +{ +uint32_t ulOriginalBASEPRI, ulNewBASEPRI; + + __asm volatile + ( + " mrs %0, basepri \n" \ + " mov %1, %2 \n" \ + " msr basepri, %1 \n" \ + " isb \n" \ + " dsb \n" \ + :"=r" (ulOriginalBASEPRI), "=r" (ulNewBASEPRI) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) : "memory" + ); + + /* This return will not be reached but is necessary to prevent compiler + warnings. */ + return ulOriginalBASEPRI; +} +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static void vPortSetBASEPRI( uint32_t ulNewMaskValue ) +{ + __asm volatile + ( + " msr basepri, %0 " :: "r" ( ulNewMaskValue ) : "memory" + ); +} +/*-----------------------------------------------------------*/ + + +#ifdef __cplusplus +} +#endif + +#endif /* PORTMACRO_H */ +
diff --git a/Source/portable/GCC/ARM_CM4F/port.c b/Source/portable/GCC/ARM_CM4F/port.c new file mode 100644 index 0000000..ae96b4c --- /dev/null +++ b/Source/portable/GCC/ARM_CM4F/port.c
@@ -0,0 +1,775 @@ +/* + * FreeRTOS Kernel V10.0.1 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/*----------------------------------------------------------- + * Implementation of functions defined in portable.h for the ARM CM4F port. + *----------------------------------------------------------*/ + +/* Scheduler includes. */ +#include "FreeRTOS.h" +#include "task.h" + +#ifndef __VFP_FP__ + #error This port can only be used when the project options are configured to enable hardware floating point support. +#endif + +#ifndef configSYSTICK_CLOCK_HZ + #define configSYSTICK_CLOCK_HZ configCPU_CLOCK_HZ + /* Ensure the SysTick is clocked at the same frequency as the core. */ + #define portNVIC_SYSTICK_CLK_BIT ( 1UL << 2UL ) +#else + /* The way the SysTick is clocked is not modified in case it is not the same + as the core. */ + #define portNVIC_SYSTICK_CLK_BIT ( 0 ) +#endif + +/* Constants required to manipulate the core. Registers first... */ +#define portNVIC_SYSTICK_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000e010 ) ) +#define portNVIC_SYSTICK_LOAD_REG ( * ( ( volatile uint32_t * ) 0xe000e014 ) ) +#define portNVIC_SYSTICK_CURRENT_VALUE_REG ( * ( ( volatile uint32_t * ) 0xe000e018 ) ) +#define portNVIC_SYSPRI2_REG ( * ( ( volatile uint32_t * ) 0xe000ed20 ) ) +/* ...then bits in the registers. */ +#define portNVIC_SYSTICK_INT_BIT ( 1UL << 1UL ) +#define portNVIC_SYSTICK_ENABLE_BIT ( 1UL << 0UL ) +#define portNVIC_SYSTICK_COUNT_FLAG_BIT ( 1UL << 16UL ) +#define portNVIC_PENDSVCLEAR_BIT ( 1UL << 27UL ) +#define portNVIC_PEND_SYSTICK_CLEAR_BIT ( 1UL << 25UL ) + +/* Constants used to detect a Cortex-M7 r0p1 core, which should use the ARM_CM7 +r0p1 port. */ +#define portCPUID ( * ( ( volatile uint32_t * ) 0xE000ed00 ) ) +#define portCORTEX_M7_r0p1_ID ( 0x410FC271UL ) +#define portCORTEX_M7_r0p0_ID ( 0x410FC270UL ) + +#define portNVIC_PENDSV_PRI ( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 16UL ) +#define portNVIC_SYSTICK_PRI ( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 24UL ) + +/* Constants required to check the validity of an interrupt priority. */ +#define portFIRST_USER_INTERRUPT_NUMBER ( 16 ) +#define portNVIC_IP_REGISTERS_OFFSET_16 ( 0xE000E3F0 ) +#define portAIRCR_REG ( * ( ( volatile uint32_t * ) 0xE000ED0C ) ) +#define portMAX_8_BIT_VALUE ( ( uint8_t ) 0xff ) +#define portTOP_BIT_OF_BYTE ( ( uint8_t ) 0x80 ) +#define portMAX_PRIGROUP_BITS ( ( uint8_t ) 7 ) +#define portPRIORITY_GROUP_MASK ( 0x07UL << 8UL ) +#define portPRIGROUP_SHIFT ( 8UL ) + +/* Masks off all bits but the VECTACTIVE bits in the ICSR register. */ +#define portVECTACTIVE_MASK ( 0xFFUL ) + +/* Constants required to manipulate the VFP. */ +#define portFPCCR ( ( volatile uint32_t * ) 0xe000ef34 ) /* Floating point context control register. */ +#define portASPEN_AND_LSPEN_BITS ( 0x3UL << 30UL ) + +/* Constants required to set up the initial stack. */ +#define portINITIAL_XPSR ( 0x01000000 ) +#define portINITIAL_EXC_RETURN ( 0xfffffffd ) + +/* The systick is a 24-bit counter. */ +#define portMAX_24_BIT_NUMBER ( 0xffffffUL ) + +/* For strict compliance with the Cortex-M spec the task start address should +have bit-0 clear, as it is loaded into the PC on exit from an ISR. */ +#define portSTART_ADDRESS_MASK ( ( StackType_t ) 0xfffffffeUL ) + +/* A fiddle factor to estimate the number of SysTick counts that would have +occurred while the SysTick counter is stopped during tickless idle +calculations. */ +#define portMISSED_COUNTS_FACTOR ( 45UL ) + +/* Let the user override the pre-loading of the initial LR with the address of +prvTaskExitError() in case it messes up unwinding of the stack in the +debugger. */ +#ifdef configTASK_RETURN_ADDRESS + #define portTASK_RETURN_ADDRESS configTASK_RETURN_ADDRESS +#else + #define portTASK_RETURN_ADDRESS prvTaskExitError +#endif + +/* + * Setup the timer to generate the tick interrupts. The implementation in this + * file is weak to allow application writers to change the timer used to + * generate the tick interrupt. + */ +void vPortSetupTimerInterrupt( void ); + +/* + * Exception handlers. + */ +void xPortPendSVHandler( void ) __attribute__ (( naked )); +void xPortSysTickHandler( void ); +void vPortSVCHandler( void ) __attribute__ (( naked )); + +/* + * Start first task is a separate function so it can be tested in isolation. + */ +static void prvPortStartFirstTask( void ) __attribute__ (( naked )); + +/* + * Function to enable the VFP. + */ +static void vPortEnableVFP( void ) __attribute__ (( naked )); + +/* + * Used to catch tasks that attempt to return from their implementing function. + */ +static void prvTaskExitError( void ); + +/*-----------------------------------------------------------*/ + +/* Each task maintains its own interrupt status in the critical nesting +variable. */ +static UBaseType_t uxCriticalNesting = 0xaaaaaaaa; + +/* + * The number of SysTick increments that make up one tick period. + */ +#if( configUSE_TICKLESS_IDLE == 1 ) + static uint32_t ulTimerCountsForOneTick = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * The maximum number of tick periods that can be suppressed is limited by the + * 24 bit resolution of the SysTick timer. + */ +#if( configUSE_TICKLESS_IDLE == 1 ) + static uint32_t xMaximumPossibleSuppressedTicks = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * Compensate for the CPU cycles that pass while the SysTick is stopped (low + * power functionality only. + */ +#if( configUSE_TICKLESS_IDLE == 1 ) + static uint32_t ulStoppedTimerCompensation = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * Used by the portASSERT_IF_INTERRUPT_PRIORITY_INVALID() macro to ensure + * FreeRTOS API functions are not called from interrupts that have been assigned + * a priority above configMAX_SYSCALL_INTERRUPT_PRIORITY. + */ +#if( configASSERT_DEFINED == 1 ) + static uint8_t ucMaxSysCallPriority = 0; + static uint32_t ulMaxPRIGROUPValue = 0; + static const volatile uint8_t * const pcInterruptPriorityRegisters = ( const volatile uint8_t * const ) portNVIC_IP_REGISTERS_OFFSET_16; +#endif /* configASSERT_DEFINED */ + +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters ) +{ + /* Simulate the stack frame as it would be created by a context switch + interrupt. */ + + /* Offset added to account for the way the MCU uses the stack on entry/exit + of interrupts, and to ensure alignment. */ + pxTopOfStack--; + + *pxTopOfStack = portINITIAL_XPSR; /* xPSR */ + pxTopOfStack--; + *pxTopOfStack = ( ( StackType_t ) pxCode ) & portSTART_ADDRESS_MASK; /* PC */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */ + + /* Save code space by skipping register initialisation. */ + pxTopOfStack -= 5; /* R12, R3, R2 and R1. */ + *pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */ + + /* A save method is being used that requires each task to maintain its + own exec return value. */ + pxTopOfStack--; + *pxTopOfStack = portINITIAL_EXC_RETURN; + + pxTopOfStack -= 8; /* R11, R10, R9, R8, R7, R6, R5 and R4. */ + + return pxTopOfStack; +} +/*-----------------------------------------------------------*/ + +static void prvTaskExitError( void ) +{ +volatile uint32_t ulDummy = 0; + + /* A function that implements a task must not exit or attempt to return to + its caller as there is nothing to return to. If a task wants to exit it + should instead call vTaskDelete( NULL ). + + Artificially force an assert() to be triggered if configASSERT() is + defined, then stop here so application writers can catch the error. */ + configASSERT( uxCriticalNesting == ~0UL ); + portDISABLE_INTERRUPTS(); + while( ulDummy == 0 ) + { + /* This file calls prvTaskExitError() after the scheduler has been + started to remove a compiler warning about the function being defined + but never called. ulDummy is used purely to quieten other warnings + about code appearing after this function is called - making ulDummy + volatile makes the compiler think the function could return and + therefore not output an 'unreachable code' warning for code that appears + after it. */ + } +} +/*-----------------------------------------------------------*/ + +void vPortSVCHandler( void ) +{ + __asm volatile ( + " ldr r3, pxCurrentTCBConst2 \n" /* Restore the context. */ + " ldr r1, [r3] \n" /* Use pxCurrentTCBConst to get the pxCurrentTCB address. */ + " ldr r0, [r1] \n" /* The first item in pxCurrentTCB is the task top of stack. */ + " ldmia r0!, {r4-r11, r14} \n" /* Pop the registers that are not automatically saved on exception entry and the critical nesting count. */ + " msr psp, r0 \n" /* Restore the task stack pointer. */ + " isb \n" + " mov r0, #0 \n" + " msr basepri, r0 \n" + " bx r14 \n" + " \n" + " .align 4 \n" + "pxCurrentTCBConst2: .word pxCurrentTCB \n" + ); +} +/*-----------------------------------------------------------*/ + +static void prvPortStartFirstTask( void ) +{ + /* Start the first task. This also clears the bit that indicates the FPU is + in use in case the FPU was used before the scheduler was started - which + would otherwise result in the unnecessary leaving of space in the SVC stack + for lazy saving of FPU registers. */ + __asm volatile( + " ldr r0, =0xE000ED08 \n" /* Use the NVIC offset register to locate the stack. */ + " ldr r0, [r0] \n" + " ldr r0, [r0] \n" + " msr msp, r0 \n" /* Set the msp back to the start of the stack. */ + " mov r0, #0 \n" /* Clear the bit that indicates the FPU is in use, see comment above. */ + " msr control, r0 \n" + " cpsie i \n" /* Globally enable interrupts. */ + " cpsie f \n" + " dsb \n" + " isb \n" + " svc 0 \n" /* System call to start first task. */ + " nop \n" + ); +} +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +BaseType_t xPortStartScheduler( void ) +{ + /* configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0. + See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html */ + configASSERT( configMAX_SYSCALL_INTERRUPT_PRIORITY ); + + /* This port can be used on all revisions of the Cortex-M7 core other than + the r0p1 parts. r0p1 parts should use the port from the + /source/portable/GCC/ARM_CM7/r0p1 directory. */ + configASSERT( portCPUID != portCORTEX_M7_r0p1_ID ); + configASSERT( portCPUID != portCORTEX_M7_r0p0_ID ); + + #if( configASSERT_DEFINED == 1 ) + { + volatile uint32_t ulOriginalPriority; + volatile uint8_t * const pucFirstUserPriorityRegister = ( volatile uint8_t * const ) ( portNVIC_IP_REGISTERS_OFFSET_16 + portFIRST_USER_INTERRUPT_NUMBER ); + volatile uint8_t ucMaxPriorityValue; + + /* Determine the maximum priority from which ISR safe FreeRTOS API + functions can be called. ISR safe functions are those that end in + "FromISR". FreeRTOS maintains separate thread and ISR API functions to + ensure interrupt entry is as fast and simple as possible. + + Save the interrupt priority value that is about to be clobbered. */ + ulOriginalPriority = *pucFirstUserPriorityRegister; + + /* Determine the number of priority bits available. First write to all + possible bits. */ + *pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE; + + /* Read the value back to see how many bits stuck. */ + ucMaxPriorityValue = *pucFirstUserPriorityRegister; + + /* Use the same mask on the maximum system call priority. */ + ucMaxSysCallPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY & ucMaxPriorityValue; + + /* Calculate the maximum acceptable priority group value for the number + of bits read back. */ + ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS; + while( ( ucMaxPriorityValue & portTOP_BIT_OF_BYTE ) == portTOP_BIT_OF_BYTE ) + { + ulMaxPRIGROUPValue--; + ucMaxPriorityValue <<= ( uint8_t ) 0x01; + } + + #ifdef __NVIC_PRIO_BITS + { + /* Check the CMSIS configuration that defines the number of + priority bits matches the number of priority bits actually queried + from the hardware. */ + configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == __NVIC_PRIO_BITS ); + } + #endif + + #ifdef configPRIO_BITS + { + /* Check the FreeRTOS configuration that defines the number of + priority bits matches the number of priority bits actually queried + from the hardware. */ + configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == configPRIO_BITS ); + } + #endif + + /* Shift the priority group value back to its position within the AIRCR + register. */ + ulMaxPRIGROUPValue <<= portPRIGROUP_SHIFT; + ulMaxPRIGROUPValue &= portPRIORITY_GROUP_MASK; + + /* Restore the clobbered interrupt priority register to its original + value. */ + *pucFirstUserPriorityRegister = ulOriginalPriority; + } + #endif /* conifgASSERT_DEFINED */ + + /* Make PendSV and SysTick the lowest priority interrupts. */ + portNVIC_SYSPRI2_REG |= portNVIC_PENDSV_PRI; + portNVIC_SYSPRI2_REG |= portNVIC_SYSTICK_PRI; + + /* Start the timer that generates the tick ISR. Interrupts are disabled + here already. */ + vPortSetupTimerInterrupt(); + + /* Initialise the critical nesting count ready for the first task. */ + uxCriticalNesting = 0; + + /* Ensure the VFP is enabled - it should be anyway. */ + vPortEnableVFP(); + + /* Lazy save always. */ + *( portFPCCR ) |= portASPEN_AND_LSPEN_BITS; + + /* Start the first task. */ + prvPortStartFirstTask(); + + /* Should never get here as the tasks will now be executing! Call the task + exit error function to prevent compiler warnings about a static function + not being called in the case that the application writer overrides this + functionality by defining configTASK_RETURN_ADDRESS. Call + vTaskSwitchContext() so link time optimisation does not remove the + symbol. */ + vTaskSwitchContext(); + prvTaskExitError(); + + /* Should not get here! */ + return 0; +} +/*-----------------------------------------------------------*/ + +void vPortEndScheduler( void ) +{ + /* Not implemented in ports where there is nothing to return to. + Artificially force an assert. */ + configASSERT( uxCriticalNesting == 1000UL ); +} +/*-----------------------------------------------------------*/ + +void vPortEnterCritical( void ) +{ + portDISABLE_INTERRUPTS(); + uxCriticalNesting++; + + /* This is not the interrupt safe version of the enter critical function so + assert() if it is being called from an interrupt context. Only API + functions that end in "FromISR" can be used in an interrupt. Only assert if + the critical nesting count is 1 to protect against recursive calls if the + assert function also uses a critical section. */ + if( uxCriticalNesting == 1 ) + { + configASSERT( ( portNVIC_INT_CTRL_REG & portVECTACTIVE_MASK ) == 0 ); + } +} +/*-----------------------------------------------------------*/ + +void vPortExitCritical( void ) +{ + configASSERT( uxCriticalNesting ); + uxCriticalNesting--; + if( uxCriticalNesting == 0 ) + { + portENABLE_INTERRUPTS(); + } +} +/*-----------------------------------------------------------*/ + +void xPortPendSVHandler( void ) +{ + /* This is a naked function. */ + + __asm volatile + ( + " mrs r0, psp \n" + " isb \n" + " \n" + " ldr r3, pxCurrentTCBConst \n" /* Get the location of the current TCB. */ + " ldr r2, [r3] \n" + " \n" + " tst r14, #0x10 \n" /* Is the task using the FPU context? If so, push high vfp registers. */ + " it eq \n" + " vstmdbeq r0!, {s16-s31} \n" + " \n" + " stmdb r0!, {r4-r11, r14} \n" /* Save the core registers. */ + " str r0, [r2] \n" /* Save the new top of stack into the first member of the TCB. */ + " \n" + " stmdb sp!, {r0, r3} \n" + " mov r0, %0 \n" + " msr basepri, r0 \n" + " dsb \n" + " isb \n" + " bl vTaskSwitchContext \n" + " mov r0, #0 \n" + " msr basepri, r0 \n" + " ldmia sp!, {r0, r3} \n" + " \n" + " ldr r1, [r3] \n" /* The first item in pxCurrentTCB is the task top of stack. */ + " ldr r0, [r1] \n" + " \n" + " ldmia r0!, {r4-r11, r14} \n" /* Pop the core registers. */ + " \n" + " tst r14, #0x10 \n" /* Is the task using the FPU context? If so, pop the high vfp registers too. */ + " it eq \n" + " vldmiaeq r0!, {s16-s31} \n" + " \n" + " msr psp, r0 \n" + " isb \n" + " \n" + #ifdef WORKAROUND_PMU_CM001 /* XMC4000 specific errata workaround. */ + #if WORKAROUND_PMU_CM001 == 1 + " push { r14 } \n" + " pop { pc } \n" + #endif + #endif + " \n" + " bx r14 \n" + " \n" + " .align 4 \n" + "pxCurrentTCBConst: .word pxCurrentTCB \n" + ::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY) + ); +} +/*-----------------------------------------------------------*/ + +void xPortSysTickHandler( void ) +{ + /* The SysTick runs at the lowest interrupt priority, so when this interrupt + executes all interrupts must be unmasked. There is therefore no need to + save and then restore the interrupt mask value as its value is already + known. */ + portDISABLE_INTERRUPTS(); + { + /* Increment the RTOS tick. */ + if( xTaskIncrementTick() != pdFALSE ) + { + /* A context switch is required. Context switching is performed in + the PendSV interrupt. Pend the PendSV interrupt. */ + portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; + } + } + portENABLE_INTERRUPTS(); +} +/*-----------------------------------------------------------*/ + +#if( configUSE_TICKLESS_IDLE == 1 ) + + __attribute__((weak)) void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime ) + { + uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements; + TickType_t xModifiableIdleTime; + + /* Make sure the SysTick reload value does not overflow the counter. */ + if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks ) + { + xExpectedIdleTime = xMaximumPossibleSuppressedTicks; + } + + /* Stop the SysTick momentarily. The time the SysTick is stopped for + is accounted for as best it can be, but using the tickless mode will + inevitably result in some tiny drift of the time maintained by the + kernel with respect to calendar time. */ + portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE_BIT; + + /* Calculate the reload value required to wait xExpectedIdleTime + tick periods. -1 is used because this code will execute part way + through one of the tick periods. */ + ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) ); + if( ulReloadValue > ulStoppedTimerCompensation ) + { + ulReloadValue -= ulStoppedTimerCompensation; + } + + /* Enter a critical section but don't use the taskENTER_CRITICAL() + method as that will mask interrupts that should exit sleep mode. */ + __asm volatile( "cpsid i" ::: "memory" ); + __asm volatile( "dsb" ); + __asm volatile( "isb" ); + + /* If a context switch is pending or a task is waiting for the scheduler + to be unsuspended then abandon the low power entry. */ + if( eTaskConfirmSleepModeStatus() == eAbortSleep ) + { + /* Restart from whatever is left in the count register to complete + this tick period. */ + portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG; + + /* Restart SysTick. */ + portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT; + + /* Reset the reload register to the value required for normal tick + periods. */ + portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL; + + /* Re-enable interrupts - see comments above the cpsid instruction() + above. */ + __asm volatile( "cpsie i" ::: "memory" ); + } + else + { + /* Set the new reload value. */ + portNVIC_SYSTICK_LOAD_REG = ulReloadValue; + + /* Clear the SysTick count flag and set the count value back to + zero. */ + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + + /* Restart SysTick. */ + portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT; + + /* Sleep until something happens. configPRE_SLEEP_PROCESSING() can + set its parameter to 0 to indicate that its implementation contains + its own wait for interrupt or wait for event instruction, and so wfi + should not be executed again. However, the original expected idle + time variable must remain unmodified, so a copy is taken. */ + xModifiableIdleTime = xExpectedIdleTime; + configPRE_SLEEP_PROCESSING( &xModifiableIdleTime ); + if( xModifiableIdleTime > 0 ) + { + __asm volatile( "dsb" ::: "memory" ); + __asm volatile( "wfi" ); + __asm volatile( "isb" ); + } + configPOST_SLEEP_PROCESSING( &xExpectedIdleTime ); + + /* Re-enable interrupts to allow the interrupt that brought the MCU + out of sleep mode to execute immediately. see comments above + __disable_interrupt() call above. */ + __asm volatile( "cpsie i" ::: "memory" ); + __asm volatile( "dsb" ); + __asm volatile( "isb" ); + + /* Disable interrupts again because the clock is about to be stopped + and interrupts that execute while the clock is stopped will increase + any slippage between the time maintained by the RTOS and calendar + time. */ + __asm volatile( "cpsid i" ::: "memory" ); + __asm volatile( "dsb" ); + __asm volatile( "isb" ); + + /* Disable the SysTick clock without reading the + portNVIC_SYSTICK_CTRL_REG register to ensure the + portNVIC_SYSTICK_COUNT_FLAG_BIT is not cleared if it is set. Again, + the time the SysTick is stopped for is accounted for as best it can + be, but using the tickless mode will inevitably result in some tiny + drift of the time maintained by the kernel with respect to calendar + time*/ + portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT ); + + /* Determine if the SysTick clock has already counted to zero and + been set back to the current reload value (the reload back being + correct for the entire expected idle time) or if the SysTick is yet + to count to zero (in which case an interrupt other than the SysTick + must have brought the system out of sleep mode). */ + if( ( portNVIC_SYSTICK_CTRL_REG & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 ) + { + uint32_t ulCalculatedLoadValue; + + /* The tick interrupt is already pending, and the SysTick count + reloaded with ulReloadValue. Reset the + portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick + period. */ + ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG ); + + /* Don't allow a tiny value, or values that have somehow + underflowed because the post sleep hook did something + that took too long. */ + if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) ) + { + ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ); + } + + portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue; + + /* As the pending tick will be processed as soon as this + function exits, the tick value maintained by the tick is stepped + forward by one less than the time spent waiting. */ + ulCompleteTickPeriods = xExpectedIdleTime - 1UL; + } + else + { + /* Something other than the tick interrupt ended the sleep. + Work out how long the sleep lasted rounded to complete tick + periods (not the ulReload value which accounted for part + ticks). */ + ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG; + + /* How many complete tick periods passed while the processor + was waiting? */ + ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick; + + /* The reload value is set to whatever fraction of a single tick + period remains. */ + portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements; + } + + /* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG + again, then set portNVIC_SYSTICK_LOAD_REG back to its standard + value. */ + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT; + vTaskStepTick( ulCompleteTickPeriods ); + portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL; + + /* Exit with interrpts enabled. */ + __asm volatile( "cpsie i" ::: "memory" ); + } + } + +#endif /* #if configUSE_TICKLESS_IDLE */ +/*-----------------------------------------------------------*/ + +/* + * Setup the systick timer to generate the tick interrupts at the required + * frequency. + */ +__attribute__(( weak )) void vPortSetupTimerInterrupt( void ) +{ + /* Calculate the constants required to configure the tick interrupt. */ + #if( configUSE_TICKLESS_IDLE == 1 ) + { + ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ); + xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick; + ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ ); + } + #endif /* configUSE_TICKLESS_IDLE */ + + /* Stop and clear the SysTick. */ + portNVIC_SYSTICK_CTRL_REG = 0UL; + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + + /* Configure SysTick to interrupt at the requested rate. */ + portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL; + portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT ); +} +/*-----------------------------------------------------------*/ + +/* This is a naked function. */ +static void vPortEnableVFP( void ) +{ + __asm volatile + ( + " ldr.w r0, =0xE000ED88 \n" /* The FPU enable bits are in the CPACR. */ + " ldr r1, [r0] \n" + " \n" + " orr r1, r1, #( 0xf << 20 ) \n" /* Enable CP10 and CP11 coprocessors, then save back. */ + " str r1, [r0] \n" + " bx r14 " + ); +} +/*-----------------------------------------------------------*/ + +#if( configASSERT_DEFINED == 1 ) + + void vPortValidateInterruptPriority( void ) + { + uint32_t ulCurrentInterrupt; + uint8_t ucCurrentPriority; + + /* Obtain the number of the currently executing interrupt. */ + __asm volatile( "mrs %0, ipsr" : "=r"( ulCurrentInterrupt ) :: "memory" ); + + /* Is the interrupt number a user defined interrupt? */ + if( ulCurrentInterrupt >= portFIRST_USER_INTERRUPT_NUMBER ) + { + /* Look up the interrupt's priority. */ + ucCurrentPriority = pcInterruptPriorityRegisters[ ulCurrentInterrupt ]; + + /* The following assertion will fail if a service routine (ISR) for + an interrupt that has been assigned a priority above + configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API + function. ISR safe FreeRTOS API functions must *only* be called + from interrupts that have been assigned a priority at or below + configMAX_SYSCALL_INTERRUPT_PRIORITY. + + Numerically low interrupt priority numbers represent logically high + interrupt priorities, therefore the priority of the interrupt must + be set to a value equal to or numerically *higher* than + configMAX_SYSCALL_INTERRUPT_PRIORITY. + + Interrupts that use the FreeRTOS API must not be left at their + default priority of zero as that is the highest possible priority, + which is guaranteed to be above configMAX_SYSCALL_INTERRUPT_PRIORITY, + and therefore also guaranteed to be invalid. + + FreeRTOS maintains separate thread and ISR API functions to ensure + interrupt entry is as fast and simple as possible. + + The following links provide detailed information: + http://www.freertos.org/RTOS-Cortex-M3-M4.html + http://www.freertos.org/FAQHelp.html */ + configASSERT( ucCurrentPriority >= ucMaxSysCallPriority ); + } + + /* Priority grouping: The interrupt controller (NVIC) allows the bits + that define each interrupt's priority to be split between bits that + define the interrupt's pre-emption priority bits and bits that define + the interrupt's sub-priority. For simplicity all bits must be defined + to be pre-emption priority bits. The following assertion will fail if + this is not the case (if some bits represent a sub-priority). + + If the application only uses CMSIS libraries for interrupt + configuration then the correct setting can be achieved on all Cortex-M + devices by calling NVIC_SetPriorityGrouping( 0 ); before starting the + scheduler. Note however that some vendor specific peripheral libraries + assume a non-zero priority group setting, in which cases using a value + of zero will result in unpredictable behaviour. */ + configASSERT( ( portAIRCR_REG & portPRIORITY_GROUP_MASK ) <= ulMaxPRIGROUPValue ); + } + +#endif /* configASSERT_DEFINED */ + +
diff --git a/Source/portable/GCC/ARM_CM4F/portmacro.h b/Source/portable/GCC/ARM_CM4F/portmacro.h new file mode 100644 index 0000000..1a95016 --- /dev/null +++ b/Source/portable/GCC/ARM_CM4F/portmacro.h
@@ -0,0 +1,242 @@ +/* + * FreeRTOS Kernel V10.0.1 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef PORTMACRO_H +#define PORTMACRO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/*----------------------------------------------------------- + * Port specific definitions. + * + * The settings in this file configure FreeRTOS correctly for the + * given hardware and compiler. + * + * These settings should not be altered. + *----------------------------------------------------------- + */ + +/* Type definitions. */ +#define portCHAR char +#define portFLOAT float +#define portDOUBLE double +#define portLONG long +#define portSHORT short +#define portSTACK_TYPE uint32_t +#define portBASE_TYPE long + +typedef portSTACK_TYPE StackType_t; +typedef long BaseType_t; +typedef unsigned long UBaseType_t; + +#if( configUSE_16_BIT_TICKS == 1 ) + typedef uint16_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffff +#else + typedef uint32_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffffffffUL + + /* 32-bit tick type on a 32-bit architecture, so reads of the tick count do + not need to be guarded with a critical section. */ + #define portTICK_TYPE_IS_ATOMIC 1 +#endif +/*-----------------------------------------------------------*/ + +/* Architecture specifics. */ +#define portSTACK_GROWTH ( -1 ) +#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ ) +#define portBYTE_ALIGNMENT 8 +/*-----------------------------------------------------------*/ + +/* Scheduler utilities. */ +#define portYIELD() \ +{ \ + /* Set a PendSV to request a context switch. */ \ + portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; \ + \ + /* Barriers are normally not required but do ensure the code is completely \ + within the specified behaviour for the architecture. */ \ + __asm volatile( "dsb" ::: "memory" ); \ + __asm volatile( "isb" ); \ +} + +#define portNVIC_INT_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000ed04 ) ) +#define portNVIC_PENDSVSET_BIT ( 1UL << 28UL ) +#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired != pdFALSE ) portYIELD() +#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x ) +/*-----------------------------------------------------------*/ + +/* Critical section management. */ +extern void vPortEnterCritical( void ); +extern void vPortExitCritical( void ); +#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortRaiseBASEPRI() +#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) vPortSetBASEPRI(x) +#define portDISABLE_INTERRUPTS() vPortRaiseBASEPRI() +#define portENABLE_INTERRUPTS() vPortSetBASEPRI(0) +#define portENTER_CRITICAL() vPortEnterCritical() +#define portEXIT_CRITICAL() vPortExitCritical() + +/*-----------------------------------------------------------*/ + +/* Task function macros as described on the FreeRTOS.org WEB site. These are +not necessary for to use this port. They are defined so the common demo files +(which build with all the ports) will build. */ +#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters ) +#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters ) +/*-----------------------------------------------------------*/ + +/* Tickless idle/low power functionality. */ +#ifndef portSUPPRESS_TICKS_AND_SLEEP + extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime ); + #define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime ) +#endif +/*-----------------------------------------------------------*/ + +/* Architecture specific optimisations. */ +#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION + #define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 +#endif + +#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1 + + /* Generic helper function. */ + __attribute__( ( always_inline ) ) static inline uint8_t ucPortCountLeadingZeros( uint32_t ulBitmap ) + { + uint8_t ucReturn; + + __asm volatile ( "clz %0, %1" : "=r" ( ucReturn ) : "r" ( ulBitmap ) : "memory" ); + return ucReturn; + } + + /* Check the configuration. */ + #if( configMAX_PRIORITIES > 32 ) + #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice. + #endif + + /* Store/clear the ready priorities in a bit map. */ + #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) ) + #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) ) + + /*-----------------------------------------------------------*/ + + #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) ucPortCountLeadingZeros( ( uxReadyPriorities ) ) ) + +#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */ + +/*-----------------------------------------------------------*/ + +#ifdef configASSERT + void vPortValidateInterruptPriority( void ); + #define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() vPortValidateInterruptPriority() +#endif + +/* portNOP() is not required by this port. */ +#define portNOP() + +#define portINLINE __inline + +#ifndef portFORCE_INLINE + #define portFORCE_INLINE inline __attribute__(( always_inline)) +#endif + +portFORCE_INLINE static BaseType_t xPortIsInsideInterrupt( void ) +{ +uint32_t ulCurrentInterrupt; +BaseType_t xReturn; + + /* Obtain the number of the currently executing interrupt. */ + __asm volatile( "mrs %0, ipsr" : "=r"( ulCurrentInterrupt ) :: "memory" ); + + if( ulCurrentInterrupt == 0 ) + { + xReturn = pdFALSE; + } + else + { + xReturn = pdTRUE; + } + + return xReturn; +} + +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static void vPortRaiseBASEPRI( void ) +{ +uint32_t ulNewBASEPRI; + + __asm volatile + ( + " mov %0, %1 \n" \ + " msr basepri, %0 \n" \ + " isb \n" \ + " dsb \n" \ + :"=r" (ulNewBASEPRI) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) : "memory" + ); +} + +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static uint32_t ulPortRaiseBASEPRI( void ) +{ +uint32_t ulOriginalBASEPRI, ulNewBASEPRI; + + __asm volatile + ( + " mrs %0, basepri \n" \ + " mov %1, %2 \n" \ + " msr basepri, %1 \n" \ + " isb \n" \ + " dsb \n" \ + :"=r" (ulOriginalBASEPRI), "=r" (ulNewBASEPRI) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) : "memory" + ); + + /* This return will not be reached but is necessary to prevent compiler + warnings. */ + return ulOriginalBASEPRI; +} +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static void vPortSetBASEPRI( uint32_t ulNewMaskValue ) +{ + __asm volatile + ( + " msr basepri, %0 " :: "r" ( ulNewMaskValue ) : "memory" + ); +} +/*-----------------------------------------------------------*/ + + +#ifdef __cplusplus +} +#endif + +#endif /* PORTMACRO_H */ +
diff --git a/Source/portable/GCC/ARM_CM4_MPU/port.c b/Source/portable/GCC/ARM_CM4_MPU/port.c new file mode 100644 index 0000000..5a881f4 --- /dev/null +++ b/Source/portable/GCC/ARM_CM4_MPU/port.c
@@ -0,0 +1,817 @@ +/* + * FreeRTOS Kernel V10.0.1 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/*----------------------------------------------------------- + * Implementation of functions defined in portable.h for the ARM CM3 port. + *----------------------------------------------------------*/ + +/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining +all the API functions to use the MPU wrappers. That should only be done when +task.h is included from an application file. */ +#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE + +/* Scheduler includes. */ +#include "FreeRTOS.h" +#include "task.h" + +#ifndef __VFP_FP__ + #error This port can only be used when the project options are configured to enable hardware floating point support. +#endif + +#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE + +#ifndef configSYSTICK_CLOCK_HZ + #define configSYSTICK_CLOCK_HZ configCPU_CLOCK_HZ + /* Ensure the SysTick is clocked at the same frequency as the core. */ + #define portNVIC_SYSTICK_CLK ( 1UL << 2UL ) +#else + /* The way the SysTick is clocked is not modified in case it is not the same + as the core. */ + #define portNVIC_SYSTICK_CLK ( 0 ) +#endif + +/* Constants required to access and manipulate the NVIC. */ +#define portNVIC_SYSTICK_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000e010 ) ) +#define portNVIC_SYSTICK_LOAD_REG ( * ( ( volatile uint32_t * ) 0xe000e014 ) ) +#define portNVIC_SYSTICK_CURRENT_VALUE_REG ( * ( ( volatile uint32_t * ) 0xe000e018 ) ) +#define portNVIC_SYSPRI2_REG ( * ( ( volatile uint32_t * ) 0xe000ed20 ) ) +#define portNVIC_SYSPRI1_REG ( * ( ( volatile uint32_t * ) 0xe000ed1c ) ) +#define portNVIC_SYS_CTRL_STATE_REG ( * ( ( volatile uint32_t * ) 0xe000ed24 ) ) +#define portNVIC_MEM_FAULT_ENABLE ( 1UL << 16UL ) + +/* Constants required to access and manipulate the MPU. */ +#define portMPU_TYPE_REG ( * ( ( volatile uint32_t * ) 0xe000ed90 ) ) +#define portMPU_REGION_BASE_ADDRESS_REG ( * ( ( volatile uint32_t * ) 0xe000ed9C ) ) +#define portMPU_REGION_ATTRIBUTE_REG ( * ( ( volatile uint32_t * ) 0xe000edA0 ) ) +#define portMPU_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000ed94 ) ) +#define portEXPECTED_MPU_TYPE_VALUE ( 8UL << 8UL ) /* 8 regions, unified. */ +#define portMPU_ENABLE ( 0x01UL ) +#define portMPU_BACKGROUND_ENABLE ( 1UL << 2UL ) +#define portPRIVILEGED_EXECUTION_START_ADDRESS ( 0UL ) +#define portMPU_REGION_VALID ( 0x10UL ) +#define portMPU_REGION_ENABLE ( 0x01UL ) +#define portPERIPHERALS_START_ADDRESS 0x40000000UL +#define portPERIPHERALS_END_ADDRESS 0x5FFFFFFFUL + +/* Constants required to access and manipulate the SysTick. */ +#define portNVIC_SYSTICK_INT ( 0x00000002UL ) +#define portNVIC_SYSTICK_ENABLE ( 0x00000001UL ) +#define portNVIC_PENDSV_PRI ( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 16UL ) +#define portNVIC_SYSTICK_PRI ( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 24UL ) +#define portNVIC_SVC_PRI ( ( ( uint32_t ) configMAX_SYSCALL_INTERRUPT_PRIORITY - 1UL ) << 24UL ) + +/* Constants required to manipulate the VFP. */ +#define portFPCCR ( ( volatile uint32_t * ) 0xe000ef34UL ) /* Floating point context control register. */ +#define portASPEN_AND_LSPEN_BITS ( 0x3UL << 30UL ) + +/* Constants required to set up the initial stack. */ +#define portINITIAL_XPSR ( 0x01000000UL ) +#define portINITIAL_EXC_RETURN ( 0xfffffffdUL ) +#define portINITIAL_CONTROL_IF_UNPRIVILEGED ( 0x03 ) +#define portINITIAL_CONTROL_IF_PRIVILEGED ( 0x02 ) + +/* Constants required to check the validity of an interrupt priority. */ +#define portFIRST_USER_INTERRUPT_NUMBER ( 16 ) +#define portNVIC_IP_REGISTERS_OFFSET_16 ( 0xE000E3F0 ) +#define portAIRCR_REG ( * ( ( volatile uint32_t * ) 0xE000ED0C ) ) +#define portMAX_8_BIT_VALUE ( ( uint8_t ) 0xff ) +#define portTOP_BIT_OF_BYTE ( ( uint8_t ) 0x80 ) +#define portMAX_PRIGROUP_BITS ( ( uint8_t ) 7 ) +#define portPRIORITY_GROUP_MASK ( 0x07UL << 8UL ) +#define portPRIGROUP_SHIFT ( 8UL ) + +/* Offsets in the stack to the parameters when inside the SVC handler. */ +#define portOFFSET_TO_PC ( 6 ) + +/* For strict compliance with the Cortex-M spec the task start address should +have bit-0 clear, as it is loaded into the PC on exit from an ISR. */ +#define portSTART_ADDRESS_MASK ( ( StackType_t ) 0xfffffffeUL ) + +/* + * Configure a number of standard MPU regions that are used by all tasks. + */ +static void prvSetupMPU( void ) PRIVILEGED_FUNCTION; + +/* + * Return the smallest MPU region size that a given number of bytes will fit + * into. The region size is returned as the value that should be programmed + * into the region attribute register for that region. + */ +static uint32_t prvGetMPURegionSizeSetting( uint32_t ulActualSizeInBytes ) PRIVILEGED_FUNCTION; + +/* + * Checks to see if being called from the context of an unprivileged task, and + * if so raises the privilege level and returns false - otherwise does nothing + * other than return true. + */ +BaseType_t xPortRaisePrivilege( void ) __attribute__(( naked )); + +/* + * Setup the timer to generate the tick interrupts. The implementation in this + * file is weak to allow application writers to change the timer used to + * generate the tick interrupt. + */ +void vPortSetupTimerInterrupt( void ); + +/* + * Standard FreeRTOS exception handlers. + */ +void xPortPendSVHandler( void ) __attribute__ (( naked )) PRIVILEGED_FUNCTION; +void xPortSysTickHandler( void ) __attribute__ ((optimize("3"))) PRIVILEGED_FUNCTION; +void vPortSVCHandler( void ) __attribute__ (( naked )) PRIVILEGED_FUNCTION; + +/* + * Starts the scheduler by restoring the context of the first task to run. + */ +static void prvRestoreContextOfFirstTask( void ) __attribute__(( naked )) PRIVILEGED_FUNCTION; + +/* + * C portion of the SVC handler. The SVC handler is split between an asm entry + * and a C wrapper for simplicity of coding and maintenance. + */ +static void prvSVCHandler( uint32_t *pulRegisters ) __attribute__(( noinline )) PRIVILEGED_FUNCTION; + +/* + * Function to enable the VFP. + */ + static void vPortEnableVFP( void ) __attribute__ (( naked )); + +/*-----------------------------------------------------------*/ + +/* Each task maintains its own interrupt status in the critical nesting +variable. Note this is not saved as part of the task context as context +switches can only occur when uxCriticalNesting is zero. */ +static UBaseType_t uxCriticalNesting = 0xaaaaaaaa; + +/* + * Used by the portASSERT_IF_INTERRUPT_PRIORITY_INVALID() macro to ensure + * FreeRTOS API functions are not called from interrupts that have been assigned + * a priority above configMAX_SYSCALL_INTERRUPT_PRIORITY. + */ +#if ( configASSERT_DEFINED == 1 ) + static uint8_t ucMaxSysCallPriority = 0; + static uint32_t ulMaxPRIGROUPValue = 0; + static const volatile uint8_t * const pcInterruptPriorityRegisters = ( const volatile uint8_t * const ) portNVIC_IP_REGISTERS_OFFSET_16; +#endif /* configASSERT_DEFINED */ + +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters, BaseType_t xRunPrivileged ) +{ + /* Simulate the stack frame as it would be created by a context switch + interrupt. */ + pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */ + *pxTopOfStack = portINITIAL_XPSR; /* xPSR */ + pxTopOfStack--; + *pxTopOfStack = ( ( StackType_t ) pxCode ) & portSTART_ADDRESS_MASK; /* PC */ + pxTopOfStack--; + *pxTopOfStack = 0; /* LR */ + pxTopOfStack -= 5; /* R12, R3, R2 and R1. */ + *pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */ + + /* A save method is being used that requires each task to maintain its + own exec return value. */ + pxTopOfStack--; + *pxTopOfStack = portINITIAL_EXC_RETURN; + + pxTopOfStack -= 9; /* R11, R10, R9, R8, R7, R6, R5 and R4. */ + + if( xRunPrivileged == pdTRUE ) + { + *pxTopOfStack = portINITIAL_CONTROL_IF_PRIVILEGED; + } + else + { + *pxTopOfStack = portINITIAL_CONTROL_IF_UNPRIVILEGED; + } + + return pxTopOfStack; +} +/*-----------------------------------------------------------*/ + +void vPortSVCHandler( void ) +{ + /* Assumes psp was in use. */ + __asm volatile + ( + #ifndef USE_PROCESS_STACK /* Code should not be required if a main() is using the process stack. */ + " tst lr, #4 \n" + " ite eq \n" + " mrseq r0, msp \n" + " mrsne r0, psp \n" + #else + " mrs r0, psp \n" + #endif + " b %0 \n" + ::"i"(prvSVCHandler):"r0", "memory" + ); +} +/*-----------------------------------------------------------*/ + +static void prvSVCHandler( uint32_t *pulParam ) +{ +uint8_t ucSVCNumber; + + /* The stack contains: r0, r1, r2, r3, r12, r14, the return address and + xPSR. The first argument (r0) is pulParam[ 0 ]. */ + ucSVCNumber = ( ( uint8_t * ) pulParam[ portOFFSET_TO_PC ] )[ -2 ]; + switch( ucSVCNumber ) + { + case portSVC_START_SCHEDULER : portNVIC_SYSPRI1_REG |= portNVIC_SVC_PRI; + prvRestoreContextOfFirstTask(); + break; + + case portSVC_YIELD : portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; + /* Barriers are normally not required + but do ensure the code is completely + within the specified behaviour for the + architecture. */ + __asm volatile( "dsb" ::: "memory" ); + __asm volatile( "isb" ); + + break; + + case portSVC_RAISE_PRIVILEGE : __asm volatile + ( + " mrs r1, control \n" /* Obtain current control value. */ + " bic r1, #1 \n" /* Set privilege bit. */ + " msr control, r1 \n" /* Write back new control value. */ + ::: "r1", "memory" + ); + break; + + default : /* Unknown SVC call. */ + break; + } +} +/*-----------------------------------------------------------*/ + +static void prvRestoreContextOfFirstTask( void ) +{ + __asm volatile + ( + " ldr r0, =0xE000ED08 \n" /* Use the NVIC offset register to locate the stack. */ + " ldr r0, [r0] \n" + " ldr r0, [r0] \n" + " msr msp, r0 \n" /* Set the msp back to the start of the stack. */ + " ldr r3, pxCurrentTCBConst2 \n" /* Restore the context. */ + " ldr r1, [r3] \n" + " ldr r0, [r1] \n" /* The first item in the TCB is the task top of stack. */ + " add r1, r1, #4 \n" /* Move onto the second item in the TCB... */ + " ldr r2, =0xe000ed9c \n" /* Region Base Address register. */ + " ldmia r1!, {r4-r11} \n" /* Read 4 sets of MPU registers. */ + " stmia r2!, {r4-r11} \n" /* Write 4 sets of MPU registers. */ + " ldmia r0!, {r3-r11, r14} \n" /* Pop the registers that are not automatically saved on exception entry. */ + " msr control, r3 \n" + " msr psp, r0 \n" /* Restore the task stack pointer. */ + " mov r0, #0 \n" + " msr basepri, r0 \n" + " bx r14 \n" + " \n" + " .align 4 \n" + "pxCurrentTCBConst2: .word pxCurrentTCB \n" + ); +} +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +BaseType_t xPortStartScheduler( void ) +{ + /* configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0. See + http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html */ + configASSERT( ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) ); + + #if( configASSERT_DEFINED == 1 ) + { + volatile uint32_t ulOriginalPriority; + volatile uint8_t * const pucFirstUserPriorityRegister = ( volatile uint8_t * const ) ( portNVIC_IP_REGISTERS_OFFSET_16 + portFIRST_USER_INTERRUPT_NUMBER ); + volatile uint8_t ucMaxPriorityValue; + + /* Determine the maximum priority from which ISR safe FreeRTOS API + functions can be called. ISR safe functions are those that end in + "FromISR". FreeRTOS maintains separate thread and ISR API functions to + ensure interrupt entry is as fast and simple as possible. + + Save the interrupt priority value that is about to be clobbered. */ + ulOriginalPriority = *pucFirstUserPriorityRegister; + + /* Determine the number of priority bits available. First write to all + possible bits. */ + *pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE; + + /* Read the value back to see how many bits stuck. */ + ucMaxPriorityValue = *pucFirstUserPriorityRegister; + + /* Use the same mask on the maximum system call priority. */ + ucMaxSysCallPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY & ucMaxPriorityValue; + + /* Calculate the maximum acceptable priority group value for the number + of bits read back. */ + ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS; + while( ( ucMaxPriorityValue & portTOP_BIT_OF_BYTE ) == portTOP_BIT_OF_BYTE ) + { + ulMaxPRIGROUPValue--; + ucMaxPriorityValue <<= ( uint8_t ) 0x01; + } + + #ifdef __NVIC_PRIO_BITS + { + /* Check the CMSIS configuration that defines the number of + priority bits matches the number of priority bits actually queried + from the hardware. */ + configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == __NVIC_PRIO_BITS ); + } + #endif + + #ifdef configPRIO_BITS + { + /* Check the FreeRTOS configuration that defines the number of + priority bits matches the number of priority bits actually queried + from the hardware. */ + configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == configPRIO_BITS ); + } + #endif + + /* Shift the priority group value back to its position within the AIRCR + register. */ + ulMaxPRIGROUPValue <<= portPRIGROUP_SHIFT; + ulMaxPRIGROUPValue &= portPRIORITY_GROUP_MASK; + + /* Restore the clobbered interrupt priority register to its original + value. */ + *pucFirstUserPriorityRegister = ulOriginalPriority; + } + #endif /* conifgASSERT_DEFINED */ + + /* Make PendSV and SysTick the same priority as the kernel, and the SVC + handler higher priority so it can be used to exit a critical section (where + lower priorities are masked). */ + portNVIC_SYSPRI2_REG |= portNVIC_PENDSV_PRI; + portNVIC_SYSPRI2_REG |= portNVIC_SYSTICK_PRI; + + /* Configure the regions in the MPU that are common to all tasks. */ + prvSetupMPU(); + + /* Start the timer that generates the tick ISR. Interrupts are disabled + here already. */ + vPortSetupTimerInterrupt(); + + /* Initialise the critical nesting count ready for the first task. */ + uxCriticalNesting = 0; + + /* Ensure the VFP is enabled - it should be anyway. */ + vPortEnableVFP(); + + /* Lazy save always. */ + *( portFPCCR ) |= portASPEN_AND_LSPEN_BITS; + + /* Start the first task. This also clears the bit that indicates the FPU is + in use in case the FPU was used before the scheduler was started - which + would otherwise result in the unnecessary leaving of space in the SVC stack + for lazy saving of FPU registers. */ + __asm volatile( + " ldr r0, =0xE000ED08 \n" /* Use the NVIC offset register to locate the stack. */ + " ldr r0, [r0] \n" + " ldr r0, [r0] \n" + " msr msp, r0 \n" /* Set the msp back to the start of the stack. */ + " mov r0, #0 \n" /* Clear the bit that indicates the FPU is in use, see comment above. */ + " msr control, r0 \n" + " cpsie i \n" /* Globally enable interrupts. */ + " cpsie f \n" + " dsb \n" + " isb \n" + " svc %0 \n" /* System call to start first task. */ + " nop \n" + :: "i" (portSVC_START_SCHEDULER) : "memory" ); + + /* Should not get here! */ + return 0; +} +/*-----------------------------------------------------------*/ + +void vPortEndScheduler( void ) +{ + /* Not implemented in ports where there is nothing to return to. + Artificially force an assert. */ + configASSERT( uxCriticalNesting == 1000UL ); +} +/*-----------------------------------------------------------*/ + +void vPortEnterCritical( void ) +{ +BaseType_t xRunningPrivileged = xPortRaisePrivilege(); + + portDISABLE_INTERRUPTS(); + uxCriticalNesting++; + + vPortResetPrivilege( xRunningPrivileged ); +} +/*-----------------------------------------------------------*/ + +void vPortExitCritical( void ) +{ +BaseType_t xRunningPrivileged = xPortRaisePrivilege(); + + configASSERT( uxCriticalNesting ); + uxCriticalNesting--; + if( uxCriticalNesting == 0 ) + { + portENABLE_INTERRUPTS(); + } + vPortResetPrivilege( xRunningPrivileged ); +} +/*-----------------------------------------------------------*/ + +void xPortPendSVHandler( void ) +{ + /* This is a naked function. */ + + __asm volatile + ( + " mrs r0, psp \n" + " isb \n" + " \n" + " ldr r3, pxCurrentTCBConst \n" /* Get the location of the current TCB. */ + " ldr r2, [r3] \n" + " \n" + " tst r14, #0x10 \n" /* Is the task using the FPU context? If so, push high vfp registers. */ + " it eq \n" + " vstmdbeq r0!, {s16-s31} \n" + " \n" + " mrs r1, control \n" + " stmdb r0!, {r1, r4-r11, r14} \n" /* Save the remaining registers. */ + " str r0, [r2] \n" /* Save the new top of stack into the first member of the TCB. */ + " \n" + " stmdb sp!, {r0, r3} \n" + " mov r0, %0 \n" + " msr basepri, r0 \n" + " dsb \n" + " isb \n" + " bl vTaskSwitchContext \n" + " mov r0, #0 \n" + " msr basepri, r0 \n" + " ldmia sp!, {r0, r3} \n" + " \n" /* Restore the context. */ + " ldr r1, [r3] \n" + " ldr r0, [r1] \n" /* The first item in the TCB is the task top of stack. */ + " add r1, r1, #4 \n" /* Move onto the second item in the TCB... */ + " ldr r2, =0xe000ed9c \n" /* Region Base Address register. */ + " ldmia r1!, {r4-r11} \n" /* Read 4 sets of MPU registers. */ + " stmia r2!, {r4-r11} \n" /* Write 4 sets of MPU registers. */ + " ldmia r0!, {r3-r11, r14} \n" /* Pop the registers that are not automatically saved on exception entry. */ + " msr control, r3 \n" + " \n" + " tst r14, #0x10 \n" /* Is the task using the FPU context? If so, pop the high vfp registers too. */ + " it eq \n" + " vldmiaeq r0!, {s16-s31} \n" + " \n" + " msr psp, r0 \n" + " bx r14 \n" + " \n" + " .align 4 \n" + "pxCurrentTCBConst: .word pxCurrentTCB \n" + ::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY) + ); +} +/*-----------------------------------------------------------*/ + +void xPortSysTickHandler( void ) +{ +uint32_t ulDummy; + + ulDummy = portSET_INTERRUPT_MASK_FROM_ISR(); + { + /* Increment the RTOS tick. */ + if( xTaskIncrementTick() != pdFALSE ) + { + /* Pend a context switch. */ + portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; + } + } + portCLEAR_INTERRUPT_MASK_FROM_ISR( ulDummy ); +} +/*-----------------------------------------------------------*/ + +/* + * Setup the systick timer to generate the tick interrupts at the required + * frequency. + */ +__attribute__(( weak )) void vPortSetupTimerInterrupt( void ) +{ + /* Stop and clear the SysTick. */ + portNVIC_SYSTICK_CTRL_REG = 0UL; + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + + /* Configure SysTick to interrupt at the requested rate. */ + portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL; + portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK | portNVIC_SYSTICK_INT | portNVIC_SYSTICK_ENABLE ); +} +/*-----------------------------------------------------------*/ + +/* This is a naked function. */ +static void vPortEnableVFP( void ) +{ + __asm volatile + ( + " ldr.w r0, =0xE000ED88 \n" /* The FPU enable bits are in the CPACR. */ + " ldr r1, [r0] \n" + " \n" + " orr r1, r1, #( 0xf << 20 ) \n" /* Enable CP10 and CP11 coprocessors, then save back. */ + " str r1, [r0] \n" + " bx r14 " + ); +} +/*-----------------------------------------------------------*/ + +static void prvSetupMPU( void ) +{ +extern uint32_t __privileged_functions_end__[]; +extern uint32_t __FLASH_segment_start__[]; +extern uint32_t __FLASH_segment_end__[]; +extern uint32_t __privileged_data_start__[]; +extern uint32_t __privileged_data_end__[]; + + /* Check the expected MPU is present. */ + if( portMPU_TYPE_REG == portEXPECTED_MPU_TYPE_VALUE ) + { + /* First setup the entire flash for unprivileged read only access. */ + portMPU_REGION_BASE_ADDRESS_REG = ( ( uint32_t ) __FLASH_segment_start__ ) | /* Base address. */ + ( portMPU_REGION_VALID ) | + ( portUNPRIVILEGED_FLASH_REGION ); + + portMPU_REGION_ATTRIBUTE_REG = ( portMPU_REGION_READ_ONLY ) | + ( portMPU_REGION_CACHEABLE_BUFFERABLE ) | + ( prvGetMPURegionSizeSetting( ( uint32_t ) __FLASH_segment_end__ - ( uint32_t ) __FLASH_segment_start__ ) ) | + ( portMPU_REGION_ENABLE ); + + /* Setup the first 16K for privileged only access (even though less + than 10K is actually being used). This is where the kernel code is + placed. */ + portMPU_REGION_BASE_ADDRESS_REG = ( ( uint32_t ) __FLASH_segment_start__ ) | /* Base address. */ + ( portMPU_REGION_VALID ) | + ( portPRIVILEGED_FLASH_REGION ); + + portMPU_REGION_ATTRIBUTE_REG = ( portMPU_REGION_PRIVILEGED_READ_ONLY ) | + ( portMPU_REGION_CACHEABLE_BUFFERABLE ) | + ( prvGetMPURegionSizeSetting( ( uint32_t ) __privileged_functions_end__ - ( uint32_t ) __FLASH_segment_start__ ) ) | + ( portMPU_REGION_ENABLE ); + + /* Setup the privileged data RAM region. This is where the kernel data + is placed. */ + portMPU_REGION_BASE_ADDRESS_REG = ( ( uint32_t ) __privileged_data_start__ ) | /* Base address. */ + ( portMPU_REGION_VALID ) | + ( portPRIVILEGED_RAM_REGION ); + + portMPU_REGION_ATTRIBUTE_REG = ( portMPU_REGION_PRIVILEGED_READ_WRITE ) | + ( portMPU_REGION_CACHEABLE_BUFFERABLE ) | + prvGetMPURegionSizeSetting( ( uint32_t ) __privileged_data_end__ - ( uint32_t ) __privileged_data_start__ ) | + ( portMPU_REGION_ENABLE ); + + /* By default allow everything to access the general peripherals. The + system peripherals and registers are protected. */ + portMPU_REGION_BASE_ADDRESS_REG = ( portPERIPHERALS_START_ADDRESS ) | + ( portMPU_REGION_VALID ) | + ( portGENERAL_PERIPHERALS_REGION ); + + portMPU_REGION_ATTRIBUTE_REG = ( portMPU_REGION_READ_WRITE | portMPU_REGION_EXECUTE_NEVER ) | + ( prvGetMPURegionSizeSetting( portPERIPHERALS_END_ADDRESS - portPERIPHERALS_START_ADDRESS ) ) | + ( portMPU_REGION_ENABLE ); + + /* Enable the memory fault exception. */ + portNVIC_SYS_CTRL_STATE_REG |= portNVIC_MEM_FAULT_ENABLE; + + /* Enable the MPU with the background region configured. */ + portMPU_CTRL_REG |= ( portMPU_ENABLE | portMPU_BACKGROUND_ENABLE ); + } +} +/*-----------------------------------------------------------*/ + +static uint32_t prvGetMPURegionSizeSetting( uint32_t ulActualSizeInBytes ) +{ +uint32_t ulRegionSize, ulReturnValue = 4; + + /* 32 is the smallest region size, 31 is the largest valid value for + ulReturnValue. */ + for( ulRegionSize = 32UL; ulReturnValue < 31UL; ( ulRegionSize <<= 1UL ) ) + { + if( ulActualSizeInBytes <= ulRegionSize ) + { + break; + } + else + { + ulReturnValue++; + } + } + + /* Shift the code by one before returning so it can be written directly + into the the correct bit position of the attribute register. */ + return ( ulReturnValue << 1UL ); +} +/*-----------------------------------------------------------*/ + +BaseType_t xPortRaisePrivilege( void ) +{ + __asm volatile + ( + " mrs r0, control \n" + " tst r0, #1 \n" /* Is the task running privileged? */ + " itte ne \n" + " movne r0, #0 \n" /* CONTROL[0]!=0, return false. */ + " svcne %0 \n" /* Switch to privileged. */ + " moveq r0, #1 \n" /* CONTROL[0]==0, return true. */ + " bx lr \n" + :: "i" (portSVC_RAISE_PRIVILEGE) : "r0", "memory" + ); + + return 0; +} +/*-----------------------------------------------------------*/ + +void vPortStoreTaskMPUSettings( xMPU_SETTINGS *xMPUSettings, const struct xMEMORY_REGION * const xRegions, StackType_t *pxBottomOfStack, uint32_t ulStackDepth ) +{ +extern uint32_t __SRAM_segment_start__[]; +extern uint32_t __SRAM_segment_end__[]; +extern uint32_t __privileged_data_start__[]; +extern uint32_t __privileged_data_end__[]; +int32_t lIndex; +uint32_t ul; + + if( xRegions == NULL ) + { + /* No MPU regions are specified so allow access to all RAM. */ + xMPUSettings->xRegion[ 0 ].ulRegionBaseAddress = + ( ( uint32_t ) __SRAM_segment_start__ ) | /* Base address. */ + ( portMPU_REGION_VALID ) | + ( portSTACK_REGION ); + + xMPUSettings->xRegion[ 0 ].ulRegionAttribute = + ( portMPU_REGION_READ_WRITE ) | + ( portMPU_REGION_CACHEABLE_BUFFERABLE ) | + ( prvGetMPURegionSizeSetting( ( uint32_t ) __SRAM_segment_end__ - ( uint32_t ) __SRAM_segment_start__ ) ) | + ( portMPU_REGION_ENABLE ); + + /* Re-instate the privileged only RAM region as xRegion[ 0 ] will have + just removed the privileged only parameters. */ + xMPUSettings->xRegion[ 1 ].ulRegionBaseAddress = + ( ( uint32_t ) __privileged_data_start__ ) | /* Base address. */ + ( portMPU_REGION_VALID ) | + ( portSTACK_REGION + 1 ); + + xMPUSettings->xRegion[ 1 ].ulRegionAttribute = + ( portMPU_REGION_PRIVILEGED_READ_WRITE ) | + ( portMPU_REGION_CACHEABLE_BUFFERABLE ) | + prvGetMPURegionSizeSetting( ( uint32_t ) __privileged_data_end__ - ( uint32_t ) __privileged_data_start__ ) | + ( portMPU_REGION_ENABLE ); + + /* Invalidate all other regions. */ + for( ul = 2; ul <= portNUM_CONFIGURABLE_REGIONS; ul++ ) + { + xMPUSettings->xRegion[ ul ].ulRegionBaseAddress = ( portSTACK_REGION + ul ) | portMPU_REGION_VALID; + xMPUSettings->xRegion[ ul ].ulRegionAttribute = 0UL; + } + } + else + { + /* This function is called automatically when the task is created - in + which case the stack region parameters will be valid. At all other + times the stack parameters will not be valid and it is assumed that the + stack region has already been configured. */ + if( ulStackDepth > 0 ) + { + /* Define the region that allows access to the stack. */ + xMPUSettings->xRegion[ 0 ].ulRegionBaseAddress = + ( ( uint32_t ) pxBottomOfStack ) | + ( portMPU_REGION_VALID ) | + ( portSTACK_REGION ); /* Region number. */ + + xMPUSettings->xRegion[ 0 ].ulRegionAttribute = + ( portMPU_REGION_READ_WRITE ) | /* Read and write. */ + ( prvGetMPURegionSizeSetting( ulStackDepth * ( uint32_t ) sizeof( StackType_t ) ) ) | + ( portMPU_REGION_CACHEABLE_BUFFERABLE ) | + ( portMPU_REGION_ENABLE ); + } + + lIndex = 0; + + for( ul = 1; ul <= portNUM_CONFIGURABLE_REGIONS; ul++ ) + { + if( ( xRegions[ lIndex ] ).ulLengthInBytes > 0UL ) + { + /* Translate the generic region definition contained in + xRegions into the CM3 specific MPU settings that are then + stored in xMPUSettings. */ + xMPUSettings->xRegion[ ul ].ulRegionBaseAddress = + ( ( uint32_t ) xRegions[ lIndex ].pvBaseAddress ) | + ( portMPU_REGION_VALID ) | + ( portSTACK_REGION + ul ); /* Region number. */ + + xMPUSettings->xRegion[ ul ].ulRegionAttribute = + ( prvGetMPURegionSizeSetting( xRegions[ lIndex ].ulLengthInBytes ) ) | + ( xRegions[ lIndex ].ulParameters ) | + ( portMPU_REGION_ENABLE ); + } + else + { + /* Invalidate the region. */ + xMPUSettings->xRegion[ ul ].ulRegionBaseAddress = ( portSTACK_REGION + ul ) | portMPU_REGION_VALID; + xMPUSettings->xRegion[ ul ].ulRegionAttribute = 0UL; + } + + lIndex++; + } + } +} +/*-----------------------------------------------------------*/ + +#if( configASSERT_DEFINED == 1 ) + + void vPortValidateInterruptPriority( void ) + { + uint32_t ulCurrentInterrupt; + uint8_t ucCurrentPriority; + + /* Obtain the number of the currently executing interrupt. */ + __asm volatile( "mrs %0, ipsr" : "=r"( ulCurrentInterrupt ) :: "memory" ); + + /* Is the interrupt number a user defined interrupt? */ + if( ulCurrentInterrupt >= portFIRST_USER_INTERRUPT_NUMBER ) + { + /* Look up the interrupt's priority. */ + ucCurrentPriority = pcInterruptPriorityRegisters[ ulCurrentInterrupt ]; + + /* The following assertion will fail if a service routine (ISR) for + an interrupt that has been assigned a priority above + configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API + function. ISR safe FreeRTOS API functions must *only* be called + from interrupts that have been assigned a priority at or below + configMAX_SYSCALL_INTERRUPT_PRIORITY. + + Numerically low interrupt priority numbers represent logically high + interrupt priorities, therefore the priority of the interrupt must + be set to a value equal to or numerically *higher* than + configMAX_SYSCALL_INTERRUPT_PRIORITY. + + Interrupts that use the FreeRTOS API must not be left at their + default priority of zero as that is the highest possible priority, + which is guaranteed to be above configMAX_SYSCALL_INTERRUPT_PRIORITY, + and therefore also guaranteed to be invalid. + + FreeRTOS maintains separate thread and ISR API functions to ensure + interrupt entry is as fast and simple as possible. + + The following links provide detailed information: + http://www.freertos.org/RTOS-Cortex-M3-M4.html + http://www.freertos.org/FAQHelp.html */ + configASSERT( ucCurrentPriority >= ucMaxSysCallPriority ); + } + + /* Priority grouping: The interrupt controller (NVIC) allows the bits + that define each interrupt's priority to be split between bits that + define the interrupt's pre-emption priority bits and bits that define + the interrupt's sub-priority. For simplicity all bits must be defined + to be pre-emption priority bits. The following assertion will fail if + this is not the case (if some bits represent a sub-priority). + + If the application only uses CMSIS libraries for interrupt + configuration then the correct setting can be achieved on all Cortex-M + devices by calling NVIC_SetPriorityGrouping( 0 ); before starting the + scheduler. Note however that some vendor specific peripheral libraries + assume a non-zero priority group setting, in which cases using a value + of zero will result in unpredicable behaviour. */ + configASSERT( ( portAIRCR_REG & portPRIORITY_GROUP_MASK ) <= ulMaxPRIGROUPValue ); + } + +#endif /* configASSERT_DEFINED */ +/*-----------------------------------------------------------*/ + +
diff --git a/Source/portable/GCC/ARM_CM4_MPU/portmacro.h b/Source/portable/GCC/ARM_CM4_MPU/portmacro.h new file mode 100644 index 0000000..6057f1c --- /dev/null +++ b/Source/portable/GCC/ARM_CM4_MPU/portmacro.h
@@ -0,0 +1,290 @@ +/* + * FreeRTOS Kernel V10.0.1 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef PORTMACRO_H +#define PORTMACRO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/*----------------------------------------------------------- + * Port specific definitions. + * + * The settings in this file configure FreeRTOS correctly for the + * given hardware and compiler. + * + * These settings should not be altered. + *----------------------------------------------------------- + */ + +/* Type definitions. */ +#define portCHAR char +#define portFLOAT float +#define portDOUBLE double +#define portLONG long +#define portSHORT short +#define portSTACK_TYPE uint32_t +#define portBASE_TYPE long + +typedef portSTACK_TYPE StackType_t; +typedef long BaseType_t; +typedef unsigned long UBaseType_t; + +#if( configUSE_16_BIT_TICKS == 1 ) + typedef uint16_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffff +#else + typedef uint32_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffffffffUL + + /* 32-bit tick type on a 32-bit architecture, so reads of the tick count do + not need to be guarded with a critical section. */ + #define portTICK_TYPE_IS_ATOMIC 1 +#endif +/*-----------------------------------------------------------*/ + +/* MPU specific constants. */ +#define portUSING_MPU_WRAPPERS 1 +#define portPRIVILEGE_BIT ( 0x80000000UL ) + +#define portMPU_REGION_READ_WRITE ( 0x03UL << 24UL ) +#define portMPU_REGION_PRIVILEGED_READ_ONLY ( 0x05UL << 24UL ) +#define portMPU_REGION_READ_ONLY ( 0x06UL << 24UL ) +#define portMPU_REGION_PRIVILEGED_READ_WRITE ( 0x01UL << 24UL ) +#define portMPU_REGION_CACHEABLE_BUFFERABLE ( 0x07UL << 16UL ) +#define portMPU_REGION_EXECUTE_NEVER ( 0x01UL << 28UL ) + +#define portUNPRIVILEGED_FLASH_REGION ( 0UL ) +#define portPRIVILEGED_FLASH_REGION ( 1UL ) +#define portPRIVILEGED_RAM_REGION ( 2UL ) +#define portGENERAL_PERIPHERALS_REGION ( 3UL ) +#define portSTACK_REGION ( 4UL ) +#define portFIRST_CONFIGURABLE_REGION ( 5UL ) +#define portLAST_CONFIGURABLE_REGION ( 7UL ) +#define portNUM_CONFIGURABLE_REGIONS ( ( portLAST_CONFIGURABLE_REGION - portFIRST_CONFIGURABLE_REGION ) + 1 ) +#define portTOTAL_NUM_REGIONS ( portNUM_CONFIGURABLE_REGIONS + 1 ) /* Plus one to make space for the stack region. */ + +#define portSWITCH_TO_USER_MODE() __asm volatile ( " mrs r0, control \n orr r0, #1 \n msr control, r0 " ::: "r0", "memory" ) + +typedef struct MPU_REGION_REGISTERS +{ + uint32_t ulRegionBaseAddress; + uint32_t ulRegionAttribute; +} xMPU_REGION_REGISTERS; + +/* Plus 1 to create space for the stack region. */ +typedef struct MPU_SETTINGS +{ + xMPU_REGION_REGISTERS xRegion[ portTOTAL_NUM_REGIONS ]; +} xMPU_SETTINGS; + +/* Architecture specifics. */ +#define portSTACK_GROWTH ( -1 ) +#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ ) +#define portBYTE_ALIGNMENT 8 +/*-----------------------------------------------------------*/ + +/* SVC numbers for various services. */ +#define portSVC_START_SCHEDULER 0 +#define portSVC_YIELD 1 +#define portSVC_RAISE_PRIVILEGE 2 + +/* Scheduler utilities. */ + +#define portYIELD() __asm volatile ( " SVC %0 \n" :: "i" (portSVC_YIELD) : "memory" ) +#define portYIELD_WITHIN_API() \ +{ \ + /* Set a PendSV to request a context switch. */ \ + portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; \ + \ + /* Barriers are normally not required but do ensure the code is completely \ + within the specified behaviour for the architecture. */ \ + __asm volatile( "dsb" ::: "memory" ); \ + __asm volatile( "isb" ); \ +} + +#define portNVIC_INT_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000ed04 ) ) +#define portNVIC_PENDSVSET_BIT ( 1UL << 28UL ) +#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT +#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x ) +/*-----------------------------------------------------------*/ + +/* Critical section management. */ +extern void vPortEnterCritical( void ); +extern void vPortExitCritical( void ); +#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortRaiseBASEPRI() +#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) vPortSetBASEPRI(x) +#define portDISABLE_INTERRUPTS() vPortRaiseBASEPRI() +#define portENABLE_INTERRUPTS() vPortSetBASEPRI(0) +#define portENTER_CRITICAL() vPortEnterCritical() +#define portEXIT_CRITICAL() vPortExitCritical() + +/*-----------------------------------------------------------*/ + +/* Task function macros as described on the FreeRTOS.org WEB site. These are +not necessary for to use this port. They are defined so the common demo files +(which build with all the ports) will build. */ +#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters ) +#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters ) +/*-----------------------------------------------------------*/ + +/* Architecture specific optimisations. */ +#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION + #define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 +#endif + +#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1 + + /* Generic helper function. */ + __attribute__( ( always_inline ) ) static inline uint8_t ucPortCountLeadingZeros( uint32_t ulBitmap ) + { + uint8_t ucReturn; + + __asm volatile ( "clz %0, %1" : "=r" ( ucReturn ) : "r" ( ulBitmap ) : "memory" ); + return ucReturn; + } + + /* Check the configuration. */ + #if( configMAX_PRIORITIES > 32 ) + #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice. + #endif + + /* Store/clear the ready priorities in a bit map. */ + #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) ) + #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) ) + + /*-----------------------------------------------------------*/ + + #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) ucPortCountLeadingZeros( ( uxReadyPriorities ) ) ) + +#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */ + +/*-----------------------------------------------------------*/ + +#ifdef configASSERT + void vPortValidateInterruptPriority( void ); + #define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() vPortValidateInterruptPriority() +#endif + +/* portNOP() is not required by this port. */ +#define portNOP() + +#define portINLINE __inline + +#ifndef portFORCE_INLINE + #define portFORCE_INLINE inline __attribute__(( always_inline)) +#endif + +/* Set the privilege level to user mode if xRunningPrivileged is false. */ +portFORCE_INLINE static void vPortResetPrivilege( BaseType_t xRunningPrivileged ) +{ + if( xRunningPrivileged != pdTRUE ) + { + __asm volatile ( " mrs r0, control \n" \ + " orr r0, #1 \n" \ + " msr control, r0 \n" \ + :::"r0", "memory" ); + } +} +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static BaseType_t xPortIsInsideInterrupt( void ) +{ +uint32_t ulCurrentInterrupt; +BaseType_t xReturn; + + /* Obtain the number of the currently executing interrupt. */ + __asm volatile( "mrs %0, ipsr" : "=r"( ulCurrentInterrupt ) :: "memory" ); + + if( ulCurrentInterrupt == 0 ) + { + xReturn = pdFALSE; + } + else + { + xReturn = pdTRUE; + } + + return xReturn; +} + +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static void vPortRaiseBASEPRI( void ) +{ +uint32_t ulNewBASEPRI; + + __asm volatile + ( + " mov %0, %1 \n" \ + " msr basepri, %0 \n" \ + " isb \n" \ + " dsb \n" \ + :"=r" (ulNewBASEPRI) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) : "memory" + ); +} + +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static uint32_t ulPortRaiseBASEPRI( void ) +{ +uint32_t ulOriginalBASEPRI, ulNewBASEPRI; + + __asm volatile + ( + " mrs %0, basepri \n" \ + " mov %1, %2 \n" \ + " msr basepri, %1 \n" \ + " isb \n" \ + " dsb \n" \ + :"=r" (ulOriginalBASEPRI), "=r" (ulNewBASEPRI) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) : "memory" + ); + + /* This return will not be reached but is necessary to prevent compiler + warnings. */ + return ulOriginalBASEPRI; +} +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static void vPortSetBASEPRI( uint32_t ulNewMaskValue ) +{ + __asm volatile + ( + " msr basepri, %0 " :: "r" ( ulNewMaskValue ) : "memory" + ); +} +/*-----------------------------------------------------------*/ + + +#ifdef __cplusplus +} +#endif + +#endif /* PORTMACRO_H */ +
diff --git a/Source/portable/GCC/ARM_CM7/ReadMe.txt b/Source/portable/GCC/ARM_CM7/ReadMe.txt new file mode 100644 index 0000000..4cf25c5 --- /dev/null +++ b/Source/portable/GCC/ARM_CM7/ReadMe.txt
@@ -0,0 +1,18 @@ +There are two options for running FreeRTOS on ARM Cortex-M7 microcontrollers. +The best option depends on the revision of the ARM Cortex-M7 core in use. The +revision is specified by an 'r' number, and a 'p' number, so will look something +like 'r0p1'. Check the documentation for the microcontroller in use to find the +revision of the Cortex-M7 core used in that microcontroller. If in doubt, use +the FreeRTOS port provided specifically for r0p1 revisions, as that can be used +with all core revisions. + +The first option is to use the ARM Cortex-M4F port, and the second option is to +use the Cortex-M7 r0p1 port - the latter containing a minor errata workaround. + +If the revision of the ARM Cortex-M7 core is not r0p1 then either option can be +used, but it is recommended to use the FreeRTOS ARM Cortex-M4F port located in +the /FreeRTOS/Source/portable/GCC/ARM_CM4F directory. + +If the revision of the ARM Cortex-M7 core is r0p1 then use the FreeRTOS ARM +Cortex-M7 r0p1 port located in the /FreeRTOS/Source/portable/GCC/ARM_CM7/r0p1 +directory. \ No newline at end of file
diff --git a/Source/portable/GCC/ARM_CM7/r0p1/port.c b/Source/portable/GCC/ARM_CM7/r0p1/port.c new file mode 100644 index 0000000..325264d --- /dev/null +++ b/Source/portable/GCC/ARM_CM7/r0p1/port.c
@@ -0,0 +1,765 @@ +/* + * FreeRTOS Kernel V10.0.1 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/*----------------------------------------------------------- + * Implementation of functions defined in portable.h for the ARM CM4F port. + *----------------------------------------------------------*/ + +/* Scheduler includes. */ +#include "FreeRTOS.h" +#include "task.h" + +#ifndef __VFP_FP__ + #error This port can only be used when the project options are configured to enable hardware floating point support. +#endif + +#ifndef configSYSTICK_CLOCK_HZ + #define configSYSTICK_CLOCK_HZ configCPU_CLOCK_HZ + /* Ensure the SysTick is clocked at the same frequency as the core. */ + #define portNVIC_SYSTICK_CLK_BIT ( 1UL << 2UL ) +#else + /* The way the SysTick is clocked is not modified in case it is not the same + as the core. */ + #define portNVIC_SYSTICK_CLK_BIT ( 0 ) +#endif + +/* Constants required to manipulate the core. Registers first... */ +#define portNVIC_SYSTICK_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000e010 ) ) +#define portNVIC_SYSTICK_LOAD_REG ( * ( ( volatile uint32_t * ) 0xe000e014 ) ) +#define portNVIC_SYSTICK_CURRENT_VALUE_REG ( * ( ( volatile uint32_t * ) 0xe000e018 ) ) +#define portNVIC_SYSPRI2_REG ( * ( ( volatile uint32_t * ) 0xe000ed20 ) ) +/* ...then bits in the registers. */ +#define portNVIC_SYSTICK_INT_BIT ( 1UL << 1UL ) +#define portNVIC_SYSTICK_ENABLE_BIT ( 1UL << 0UL ) +#define portNVIC_SYSTICK_COUNT_FLAG_BIT ( 1UL << 16UL ) +#define portNVIC_PENDSVCLEAR_BIT ( 1UL << 27UL ) +#define portNVIC_PEND_SYSTICK_CLEAR_BIT ( 1UL << 25UL ) + +#define portNVIC_PENDSV_PRI ( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 16UL ) +#define portNVIC_SYSTICK_PRI ( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 24UL ) + +/* Constants required to check the validity of an interrupt priority. */ +#define portFIRST_USER_INTERRUPT_NUMBER ( 16 ) +#define portNVIC_IP_REGISTERS_OFFSET_16 ( 0xE000E3F0 ) +#define portAIRCR_REG ( * ( ( volatile uint32_t * ) 0xE000ED0C ) ) +#define portMAX_8_BIT_VALUE ( ( uint8_t ) 0xff ) +#define portTOP_BIT_OF_BYTE ( ( uint8_t ) 0x80 ) +#define portMAX_PRIGROUP_BITS ( ( uint8_t ) 7 ) +#define portPRIORITY_GROUP_MASK ( 0x07UL << 8UL ) +#define portPRIGROUP_SHIFT ( 8UL ) + +/* Masks off all bits but the VECTACTIVE bits in the ICSR register. */ +#define portVECTACTIVE_MASK ( 0xFFUL ) + +/* Constants required to manipulate the VFP. */ +#define portFPCCR ( ( volatile uint32_t * ) 0xe000ef34 ) /* Floating point context control register. */ +#define portASPEN_AND_LSPEN_BITS ( 0x3UL << 30UL ) + +/* Constants required to set up the initial stack. */ +#define portINITIAL_XPSR ( 0x01000000 ) +#define portINITIAL_EXC_RETURN ( 0xfffffffd ) + +/* The systick is a 24-bit counter. */ +#define portMAX_24_BIT_NUMBER ( 0xffffffUL ) + +/* For strict compliance with the Cortex-M spec the task start address should +have bit-0 clear, as it is loaded into the PC on exit from an ISR. */ +#define portSTART_ADDRESS_MASK ( ( StackType_t ) 0xfffffffeUL ) + +/* A fiddle factor to estimate the number of SysTick counts that would have +occurred while the SysTick counter is stopped during tickless idle +calculations. */ +#define portMISSED_COUNTS_FACTOR ( 45UL ) + +/* Let the user override the pre-loading of the initial LR with the address of +prvTaskExitError() in case it messes up unwinding of the stack in the +debugger. */ +#ifdef configTASK_RETURN_ADDRESS + #define portTASK_RETURN_ADDRESS configTASK_RETURN_ADDRESS +#else + #define portTASK_RETURN_ADDRESS prvTaskExitError +#endif + +/* + * Setup the timer to generate the tick interrupts. The implementation in this + * file is weak to allow application writers to change the timer used to + * generate the tick interrupt. + */ +void vPortSetupTimerInterrupt( void ); + +/* + * Exception handlers. + */ +void xPortPendSVHandler( void ) __attribute__ (( naked )); +void xPortSysTickHandler( void ); +void vPortSVCHandler( void ) __attribute__ (( naked )); + +/* + * Start first task is a separate function so it can be tested in isolation. + */ +static void prvPortStartFirstTask( void ) __attribute__ (( naked )); + +/* + * Function to enable the VFP. + */ +static void vPortEnableVFP( void ) __attribute__ (( naked )); + +/* + * Used to catch tasks that attempt to return from their implementing function. + */ +static void prvTaskExitError( void ); + +/*-----------------------------------------------------------*/ + +/* Each task maintains its own interrupt status in the critical nesting +variable. */ +static UBaseType_t uxCriticalNesting = 0xaaaaaaaa; + +/* + * The number of SysTick increments that make up one tick period. + */ +#if( configUSE_TICKLESS_IDLE == 1 ) + static uint32_t ulTimerCountsForOneTick = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * The maximum number of tick periods that can be suppressed is limited by the + * 24 bit resolution of the SysTick timer. + */ +#if( configUSE_TICKLESS_IDLE == 1 ) + static uint32_t xMaximumPossibleSuppressedTicks = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * Compensate for the CPU cycles that pass while the SysTick is stopped (low + * power functionality only. + */ +#if( configUSE_TICKLESS_IDLE == 1 ) + static uint32_t ulStoppedTimerCompensation = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * Used by the portASSERT_IF_INTERRUPT_PRIORITY_INVALID() macro to ensure + * FreeRTOS API functions are not called from interrupts that have been assigned + * a priority above configMAX_SYSCALL_INTERRUPT_PRIORITY. + */ +#if( configASSERT_DEFINED == 1 ) + static uint8_t ucMaxSysCallPriority = 0; + static uint32_t ulMaxPRIGROUPValue = 0; + static const volatile uint8_t * const pcInterruptPriorityRegisters = ( const volatile uint8_t * const ) portNVIC_IP_REGISTERS_OFFSET_16; +#endif /* configASSERT_DEFINED */ + +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters ) +{ + /* Simulate the stack frame as it would be created by a context switch + interrupt. */ + + /* Offset added to account for the way the MCU uses the stack on entry/exit + of interrupts, and to ensure alignment. */ + pxTopOfStack--; + + *pxTopOfStack = portINITIAL_XPSR; /* xPSR */ + pxTopOfStack--; + *pxTopOfStack = ( ( StackType_t ) pxCode ) & portSTART_ADDRESS_MASK; /* PC */ + pxTopOfStack--; + *pxTopOfStack = ( StackType_t ) portTASK_RETURN_ADDRESS; /* LR */ + + /* Save code space by skipping register initialisation. */ + pxTopOfStack -= 5; /* R12, R3, R2 and R1. */ + *pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */ + + /* A save method is being used that requires each task to maintain its + own exec return value. */ + pxTopOfStack--; + *pxTopOfStack = portINITIAL_EXC_RETURN; + + pxTopOfStack -= 8; /* R11, R10, R9, R8, R7, R6, R5 and R4. */ + + return pxTopOfStack; +} +/*-----------------------------------------------------------*/ + +static void prvTaskExitError( void ) +{ +volatile uint32_t ulDummy = 0; + + /* A function that implements a task must not exit or attempt to return to + its caller as there is nothing to return to. If a task wants to exit it + should instead call vTaskDelete( NULL ). + + Artificially force an assert() to be triggered if configASSERT() is + defined, then stop here so application writers can catch the error. */ + configASSERT( uxCriticalNesting == ~0UL ); + portDISABLE_INTERRUPTS(); + while( ulDummy == 0 ) + { + /* This file calls prvTaskExitError() after the scheduler has been + started to remove a compiler warning about the function being defined + but never called. ulDummy is used purely to quieten other warnings + about code appearing after this function is called - making ulDummy + volatile makes the compiler think the function could return and + therefore not output an 'unreachable code' warning for code that appears + after it. */ + } +} +/*-----------------------------------------------------------*/ + +void vPortSVCHandler( void ) +{ + __asm volatile ( + " ldr r3, pxCurrentTCBConst2 \n" /* Restore the context. */ + " ldr r1, [r3] \n" /* Use pxCurrentTCBConst to get the pxCurrentTCB address. */ + " ldr r0, [r1] \n" /* The first item in pxCurrentTCB is the task top of stack. */ + " ldmia r0!, {r4-r11, r14} \n" /* Pop the registers that are not automatically saved on exception entry and the critical nesting count. */ + " msr psp, r0 \n" /* Restore the task stack pointer. */ + " isb \n" + " mov r0, #0 \n" + " msr basepri, r0 \n" + " bx r14 \n" + " \n" + " .align 4 \n" + "pxCurrentTCBConst2: .word pxCurrentTCB \n" + ); +} +/*-----------------------------------------------------------*/ + +static void prvPortStartFirstTask( void ) +{ + /* Start the first task. This also clears the bit that indicates the FPU is + in use in case the FPU was used before the scheduler was started - which + would otherwise result in the unnecessary leaving of space in the SVC stack + for lazy saving of FPU registers. */ + __asm volatile( + " ldr r0, =0xE000ED08 \n" /* Use the NVIC offset register to locate the stack. */ + " ldr r0, [r0] \n" + " ldr r0, [r0] \n" + " msr msp, r0 \n" /* Set the msp back to the start of the stack. */ + " mov r0, #0 \n" /* Clear the bit that indicates the FPU is in use, see comment above. */ + " msr control, r0 \n" + " cpsie i \n" /* Globally enable interrupts. */ + " cpsie f \n" + " dsb \n" + " isb \n" + " svc 0 \n" /* System call to start first task. */ + " nop \n" + ); +} +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +BaseType_t xPortStartScheduler( void ) +{ + /* configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0. + See http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html */ + configASSERT( configMAX_SYSCALL_INTERRUPT_PRIORITY ); + + #if( configASSERT_DEFINED == 1 ) + { + volatile uint32_t ulOriginalPriority; + volatile uint8_t * const pucFirstUserPriorityRegister = ( volatile uint8_t * const ) ( portNVIC_IP_REGISTERS_OFFSET_16 + portFIRST_USER_INTERRUPT_NUMBER ); + volatile uint8_t ucMaxPriorityValue; + + /* Determine the maximum priority from which ISR safe FreeRTOS API + functions can be called. ISR safe functions are those that end in + "FromISR". FreeRTOS maintains separate thread and ISR API functions to + ensure interrupt entry is as fast and simple as possible. + + Save the interrupt priority value that is about to be clobbered. */ + ulOriginalPriority = *pucFirstUserPriorityRegister; + + /* Determine the number of priority bits available. First write to all + possible bits. */ + *pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE; + + /* Read the value back to see how many bits stuck. */ + ucMaxPriorityValue = *pucFirstUserPriorityRegister; + + /* Use the same mask on the maximum system call priority. */ + ucMaxSysCallPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY & ucMaxPriorityValue; + + /* Calculate the maximum acceptable priority group value for the number + of bits read back. */ + ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS; + while( ( ucMaxPriorityValue & portTOP_BIT_OF_BYTE ) == portTOP_BIT_OF_BYTE ) + { + ulMaxPRIGROUPValue--; + ucMaxPriorityValue <<= ( uint8_t ) 0x01; + } + + #ifdef __NVIC_PRIO_BITS + { + /* Check the CMSIS configuration that defines the number of + priority bits matches the number of priority bits actually queried + from the hardware. */ + configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == __NVIC_PRIO_BITS ); + } + #endif + + #ifdef configPRIO_BITS + { + /* Check the FreeRTOS configuration that defines the number of + priority bits matches the number of priority bits actually queried + from the hardware. */ + configASSERT( ( portMAX_PRIGROUP_BITS - ulMaxPRIGROUPValue ) == configPRIO_BITS ); + } + #endif + + /* Shift the priority group value back to its position within the AIRCR + register. */ + ulMaxPRIGROUPValue <<= portPRIGROUP_SHIFT; + ulMaxPRIGROUPValue &= portPRIORITY_GROUP_MASK; + + /* Restore the clobbered interrupt priority register to its original + value. */ + *pucFirstUserPriorityRegister = ulOriginalPriority; + } + #endif /* conifgASSERT_DEFINED */ + + /* Make PendSV and SysTick the lowest priority interrupts. */ + portNVIC_SYSPRI2_REG |= portNVIC_PENDSV_PRI; + portNVIC_SYSPRI2_REG |= portNVIC_SYSTICK_PRI; + + /* Start the timer that generates the tick ISR. Interrupts are disabled + here already. */ + vPortSetupTimerInterrupt(); + + /* Initialise the critical nesting count ready for the first task. */ + uxCriticalNesting = 0; + + /* Ensure the VFP is enabled - it should be anyway. */ + vPortEnableVFP(); + + /* Lazy save always. */ + *( portFPCCR ) |= portASPEN_AND_LSPEN_BITS; + + /* Start the first task. */ + prvPortStartFirstTask(); + + /* Should never get here as the tasks will now be executing! Call the task + exit error function to prevent compiler warnings about a static function + not being called in the case that the application writer overrides this + functionality by defining configTASK_RETURN_ADDRESS. Call + vTaskSwitchContext() so link time optimisation does not remove the + symbol. */ + vTaskSwitchContext(); + prvTaskExitError(); + + /* Should not get here! */ + return 0; +} +/*-----------------------------------------------------------*/ + +void vPortEndScheduler( void ) +{ + /* Not implemented in ports where there is nothing to return to. + Artificially force an assert. */ + configASSERT( uxCriticalNesting == 1000UL ); +} +/*-----------------------------------------------------------*/ + +void vPortEnterCritical( void ) +{ + portDISABLE_INTERRUPTS(); + uxCriticalNesting++; + + /* This is not the interrupt safe version of the enter critical function so + assert() if it is being called from an interrupt context. Only API + functions that end in "FromISR" can be used in an interrupt. Only assert if + the critical nesting count is 1 to protect against recursive calls if the + assert function also uses a critical section. */ + if( uxCriticalNesting == 1 ) + { + configASSERT( ( portNVIC_INT_CTRL_REG & portVECTACTIVE_MASK ) == 0 ); + } +} +/*-----------------------------------------------------------*/ + +void vPortExitCritical( void ) +{ + configASSERT( uxCriticalNesting ); + uxCriticalNesting--; + if( uxCriticalNesting == 0 ) + { + portENABLE_INTERRUPTS(); + } +} +/*-----------------------------------------------------------*/ + +void xPortPendSVHandler( void ) +{ + /* This is a naked function. */ + + __asm volatile + ( + " mrs r0, psp \n" + " isb \n" + " \n" + " ldr r3, pxCurrentTCBConst \n" /* Get the location of the current TCB. */ + " ldr r2, [r3] \n" + " \n" + " tst r14, #0x10 \n" /* Is the task using the FPU context? If so, push high vfp registers. */ + " it eq \n" + " vstmdbeq r0!, {s16-s31} \n" + " \n" + " stmdb r0!, {r4-r11, r14} \n" /* Save the core registers. */ + " str r0, [r2] \n" /* Save the new top of stack into the first member of the TCB. */ + " \n" + " stmdb sp!, {r0, r3} \n" + " mov r0, %0 \n" + " cpsid i \n" /* Errata workaround. */ + " msr basepri, r0 \n" + " dsb \n" + " isb \n" + " cpsie i \n" /* Errata workaround. */ + " bl vTaskSwitchContext \n" + " mov r0, #0 \n" + " msr basepri, r0 \n" + " ldmia sp!, {r0, r3} \n" + " \n" + " ldr r1, [r3] \n" /* The first item in pxCurrentTCB is the task top of stack. */ + " ldr r0, [r1] \n" + " \n" + " ldmia r0!, {r4-r11, r14} \n" /* Pop the core registers. */ + " \n" + " tst r14, #0x10 \n" /* Is the task using the FPU context? If so, pop the high vfp registers too. */ + " it eq \n" + " vldmiaeq r0!, {s16-s31} \n" + " \n" + " msr psp, r0 \n" + " isb \n" + " \n" + #ifdef WORKAROUND_PMU_CM001 /* XMC4000 specific errata workaround. */ + #if WORKAROUND_PMU_CM001 == 1 + " push { r14 } \n" + " pop { pc } \n" + #endif + #endif + " \n" + " bx r14 \n" + " \n" + " .align 4 \n" + "pxCurrentTCBConst: .word pxCurrentTCB \n" + ::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY) + ); +} +/*-----------------------------------------------------------*/ + +void xPortSysTickHandler( void ) +{ + /* The SysTick runs at the lowest interrupt priority, so when this interrupt + executes all interrupts must be unmasked. There is therefore no need to + save and then restore the interrupt mask value as its value is already + known. */ + portDISABLE_INTERRUPTS(); + { + /* Increment the RTOS tick. */ + if( xTaskIncrementTick() != pdFALSE ) + { + /* A context switch is required. Context switching is performed in + the PendSV interrupt. Pend the PendSV interrupt. */ + portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; + } + } + portENABLE_INTERRUPTS(); +} +/*-----------------------------------------------------------*/ + +#if( configUSE_TICKLESS_IDLE == 1 ) + + __attribute__((weak)) void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime ) + { + uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements; + TickType_t xModifiableIdleTime; + + /* Make sure the SysTick reload value does not overflow the counter. */ + if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks ) + { + xExpectedIdleTime = xMaximumPossibleSuppressedTicks; + } + + /* Stop the SysTick momentarily. The time the SysTick is stopped for + is accounted for as best it can be, but using the tickless mode will + inevitably result in some tiny drift of the time maintained by the + kernel with respect to calendar time. */ + portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE_BIT; + + /* Calculate the reload value required to wait xExpectedIdleTime + tick periods. -1 is used because this code will execute part way + through one of the tick periods. */ + ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) ); + if( ulReloadValue > ulStoppedTimerCompensation ) + { + ulReloadValue -= ulStoppedTimerCompensation; + } + + /* Enter a critical section but don't use the taskENTER_CRITICAL() + method as that will mask interrupts that should exit sleep mode. */ + __asm volatile( "cpsid i" ::: "memory" ); + __asm volatile( "dsb" ); + __asm volatile( "isb" ); + + /* If a context switch is pending or a task is waiting for the scheduler + to be unsuspended then abandon the low power entry. */ + if( eTaskConfirmSleepModeStatus() == eAbortSleep ) + { + /* Restart from whatever is left in the count register to complete + this tick period. */ + portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG; + + /* Restart SysTick. */ + portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT; + + /* Reset the reload register to the value required for normal tick + periods. */ + portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL; + + /* Re-enable interrupts - see comments above the cpsid instruction() + above. */ + __asm volatile( "cpsie i" ::: "memory" ); + } + else + { + /* Set the new reload value. */ + portNVIC_SYSTICK_LOAD_REG = ulReloadValue; + + /* Clear the SysTick count flag and set the count value back to + zero. */ + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + + /* Restart SysTick. */ + portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT; + + /* Sleep until something happens. configPRE_SLEEP_PROCESSING() can + set its parameter to 0 to indicate that its implementation contains + its own wait for interrupt or wait for event instruction, and so wfi + should not be executed again. However, the original expected idle + time variable must remain unmodified, so a copy is taken. */ + xModifiableIdleTime = xExpectedIdleTime; + configPRE_SLEEP_PROCESSING( &xModifiableIdleTime ); + if( xModifiableIdleTime > 0 ) + { + __asm volatile( "dsb" ::: "memory" ); + __asm volatile( "wfi" ); + __asm volatile( "isb" ); + } + configPOST_SLEEP_PROCESSING( &xExpectedIdleTime ); + + /* Re-enable interrupts to allow the interrupt that brought the MCU + out of sleep mode to execute immediately. see comments above + __disable_interrupt() call above. */ + __asm volatile( "cpsie i" ::: "memory" ); + __asm volatile( "dsb" ); + __asm volatile( "isb" ); + + /* Disable interrupts again because the clock is about to be stopped + and interrupts that execute while the clock is stopped will increase + any slippage between the time maintained by the RTOS and calendar + time. */ + __asm volatile( "cpsid i" ::: "memory" ); + __asm volatile( "dsb" ); + __asm volatile( "isb" ); + + /* Disable the SysTick clock without reading the + portNVIC_SYSTICK_CTRL_REG register to ensure the + portNVIC_SYSTICK_COUNT_FLAG_BIT is not cleared if it is set. Again, + the time the SysTick is stopped for is accounted for as best it can + be, but using the tickless mode will inevitably result in some tiny + drift of the time maintained by the kernel with respect to calendar + time*/ + portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT ); + + /* Determine if the SysTick clock has already counted to zero and + been set back to the current reload value (the reload back being + correct for the entire expected idle time) or if the SysTick is yet + to count to zero (in which case an interrupt other than the SysTick + must have brought the system out of sleep mode). */ + if( ( portNVIC_SYSTICK_CTRL_REG & portNVIC_SYSTICK_COUNT_FLAG_BIT ) != 0 ) + { + uint32_t ulCalculatedLoadValue; + + /* The tick interrupt is already pending, and the SysTick count + reloaded with ulReloadValue. Reset the + portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick + period. */ + ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG ); + + /* Don't allow a tiny value, or values that have somehow + underflowed because the post sleep hook did something + that took too long. */ + if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) ) + { + ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ); + } + + portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue; + + /* As the pending tick will be processed as soon as this + function exits, the tick value maintained by the tick is stepped + forward by one less than the time spent waiting. */ + ulCompleteTickPeriods = xExpectedIdleTime - 1UL; + } + else + { + /* Something other than the tick interrupt ended the sleep. + Work out how long the sleep lasted rounded to complete tick + periods (not the ulReload value which accounted for part + ticks). */ + ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG; + + /* How many complete tick periods passed while the processor + was waiting? */ + ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick; + + /* The reload value is set to whatever fraction of a single tick + period remains. */ + portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements; + } + + /* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG + again, then set portNVIC_SYSTICK_LOAD_REG back to its standard + value. */ + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE_BIT; + vTaskStepTick( ulCompleteTickPeriods ); + portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL; + + /* Exit with interrpts enabled. */ + __asm volatile( "cpsie i" ::: "memory" ); + } + } + +#endif /* #if configUSE_TICKLESS_IDLE */ +/*-----------------------------------------------------------*/ + +/* + * Setup the systick timer to generate the tick interrupts at the required + * frequency. + */ +__attribute__(( weak )) void vPortSetupTimerInterrupt( void ) +{ + /* Calculate the constants required to configure the tick interrupt. */ + #if( configUSE_TICKLESS_IDLE == 1 ) + { + ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ); + xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick; + ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ ); + } + #endif /* configUSE_TICKLESS_IDLE */ + + /* Stop and clear the SysTick. */ + portNVIC_SYSTICK_CTRL_REG = 0UL; + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + + /* Configure SysTick to interrupt at the requested rate. */ + portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL; + portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK_BIT | portNVIC_SYSTICK_INT_BIT | portNVIC_SYSTICK_ENABLE_BIT ); +} +/*-----------------------------------------------------------*/ + +/* This is a naked function. */ +static void vPortEnableVFP( void ) +{ + __asm volatile + ( + " ldr.w r0, =0xE000ED88 \n" /* The FPU enable bits are in the CPACR. */ + " ldr r1, [r0] \n" + " \n" + " orr r1, r1, #( 0xf << 20 ) \n" /* Enable CP10 and CP11 coprocessors, then save back. */ + " str r1, [r0] \n" + " bx r14 " + ); +} +/*-----------------------------------------------------------*/ + +#if( configASSERT_DEFINED == 1 ) + + void vPortValidateInterruptPriority( void ) + { + uint32_t ulCurrentInterrupt; + uint8_t ucCurrentPriority; + + /* Obtain the number of the currently executing interrupt. */ + __asm volatile( "mrs %0, ipsr" : "=r"( ulCurrentInterrupt ) :: "memory" ); + + /* Is the interrupt number a user defined interrupt? */ + if( ulCurrentInterrupt >= portFIRST_USER_INTERRUPT_NUMBER ) + { + /* Look up the interrupt's priority. */ + ucCurrentPriority = pcInterruptPriorityRegisters[ ulCurrentInterrupt ]; + + /* The following assertion will fail if a service routine (ISR) for + an interrupt that has been assigned a priority above + configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API + function. ISR safe FreeRTOS API functions must *only* be called + from interrupts that have been assigned a priority at or below + configMAX_SYSCALL_INTERRUPT_PRIORITY. + + Numerically low interrupt priority numbers represent logically high + interrupt priorities, therefore the priority of the interrupt must + be set to a value equal to or numerically *higher* than + configMAX_SYSCALL_INTERRUPT_PRIORITY. + + Interrupts that use the FreeRTOS API must not be left at their + default priority of zero as that is the highest possible priority, + which is guaranteed to be above configMAX_SYSCALL_INTERRUPT_PRIORITY, + and therefore also guaranteed to be invalid. + + FreeRTOS maintains separate thread and ISR API functions to ensure + interrupt entry is as fast and simple as possible. + + The following links provide detailed information: + http://www.freertos.org/RTOS-Cortex-M3-M4.html + http://www.freertos.org/FAQHelp.html */ + configASSERT( ucCurrentPriority >= ucMaxSysCallPriority ); + } + + /* Priority grouping: The interrupt controller (NVIC) allows the bits + that define each interrupt's priority to be split between bits that + define the interrupt's pre-emption priority bits and bits that define + the interrupt's sub-priority. For simplicity all bits must be defined + to be pre-emption priority bits. The following assertion will fail if + this is not the case (if some bits represent a sub-priority). + + If the application only uses CMSIS libraries for interrupt + configuration then the correct setting can be achieved on all Cortex-M + devices by calling NVIC_SetPriorityGrouping( 0 ); before starting the + scheduler. Note however that some vendor specific peripheral libraries + assume a non-zero priority group setting, in which cases using a value + of zero will result in unpredictable behaviour. */ + configASSERT( ( portAIRCR_REG & portPRIORITY_GROUP_MASK ) <= ulMaxPRIGROUPValue ); + } + +#endif /* configASSERT_DEFINED */ + +
diff --git a/Source/portable/GCC/ARM_CM7/r0p1/portmacro.h b/Source/portable/GCC/ARM_CM7/r0p1/portmacro.h new file mode 100644 index 0000000..5f912ae --- /dev/null +++ b/Source/portable/GCC/ARM_CM7/r0p1/portmacro.h
@@ -0,0 +1,246 @@ +/* + * FreeRTOS Kernel V10.0.1 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + + +#ifndef PORTMACRO_H +#define PORTMACRO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/*----------------------------------------------------------- + * Port specific definitions. + * + * The settings in this file configure FreeRTOS correctly for the + * given hardware and compiler. + * + * These settings should not be altered. + *----------------------------------------------------------- + */ + +/* Type definitions. */ +#define portCHAR char +#define portFLOAT float +#define portDOUBLE double +#define portLONG long +#define portSHORT short +#define portSTACK_TYPE uint32_t +#define portBASE_TYPE long + +typedef portSTACK_TYPE StackType_t; +typedef long BaseType_t; +typedef unsigned long UBaseType_t; + +#if( configUSE_16_BIT_TICKS == 1 ) + typedef uint16_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffff +#else + typedef uint32_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffffffffUL + + /* 32-bit tick type on a 32-bit architecture, so reads of the tick count do + not need to be guarded with a critical section. */ + #define portTICK_TYPE_IS_ATOMIC 1 +#endif +/*-----------------------------------------------------------*/ + +/* Architecture specifics. */ +#define portSTACK_GROWTH ( -1 ) +#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ ) +#define portBYTE_ALIGNMENT 8 +/*-----------------------------------------------------------*/ + +/* Scheduler utilities. */ +#define portYIELD() \ +{ \ + /* Set a PendSV to request a context switch. */ \ + portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; \ + \ + /* Barriers are normally not required but do ensure the code is completely \ + within the specified behaviour for the architecture. */ \ + __asm volatile( "dsb" ::: "memory" ); \ + __asm volatile( "isb" ); \ +} + +#define portNVIC_INT_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000ed04 ) ) +#define portNVIC_PENDSVSET_BIT ( 1UL << 28UL ) +#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired != pdFALSE ) portYIELD() +#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x ) +/*-----------------------------------------------------------*/ + +/* Critical section management. */ +extern void vPortEnterCritical( void ); +extern void vPortExitCritical( void ); +#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortRaiseBASEPRI() +#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) vPortSetBASEPRI(x) +#define portDISABLE_INTERRUPTS() vPortRaiseBASEPRI() +#define portENABLE_INTERRUPTS() vPortSetBASEPRI(0) +#define portENTER_CRITICAL() vPortEnterCritical() +#define portEXIT_CRITICAL() vPortExitCritical() + +/*-----------------------------------------------------------*/ + +/* Task function macros as described on the FreeRTOS.org WEB site. These are +not necessary for to use this port. They are defined so the common demo files +(which build with all the ports) will build. */ +#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters ) +#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters ) +/*-----------------------------------------------------------*/ + +/* Tickless idle/low power functionality. */ +#ifndef portSUPPRESS_TICKS_AND_SLEEP + extern void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime ); + #define portSUPPRESS_TICKS_AND_SLEEP( xExpectedIdleTime ) vPortSuppressTicksAndSleep( xExpectedIdleTime ) +#endif +/*-----------------------------------------------------------*/ + +/* Architecture specific optimisations. */ +#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION + #define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 +#endif + +#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1 + + /* Generic helper function. */ + __attribute__( ( always_inline ) ) static inline uint8_t ucPortCountLeadingZeros( uint32_t ulBitmap ) + { + uint8_t ucReturn; + + __asm volatile ( "clz %0, %1" : "=r" ( ucReturn ) : "r" ( ulBitmap ) : "memory" ); + return ucReturn; + } + + /* Check the configuration. */ + #if( configMAX_PRIORITIES > 32 ) + #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice. + #endif + + /* Store/clear the ready priorities in a bit map. */ + #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) ) + #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) ) + + /*-----------------------------------------------------------*/ + + #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) ucPortCountLeadingZeros( ( uxReadyPriorities ) ) ) + +#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */ + +/*-----------------------------------------------------------*/ + +#ifdef configASSERT + void vPortValidateInterruptPriority( void ); + #define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() vPortValidateInterruptPriority() +#endif + +/* portNOP() is not required by this port. */ +#define portNOP() + +#define portINLINE __inline + +#ifndef portFORCE_INLINE + #define portFORCE_INLINE inline __attribute__(( always_inline)) +#endif + +portFORCE_INLINE static BaseType_t xPortIsInsideInterrupt( void ) +{ +uint32_t ulCurrentInterrupt; +BaseType_t xReturn; + + /* Obtain the number of the currently executing interrupt. */ + __asm volatile( "mrs %0, ipsr" : "=r"( ulCurrentInterrupt ) :: "memory" ); + + if( ulCurrentInterrupt == 0 ) + { + xReturn = pdFALSE; + } + else + { + xReturn = pdTRUE; + } + + return xReturn; +} + +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static void vPortRaiseBASEPRI( void ) +{ +uint32_t ulNewBASEPRI; + + __asm volatile + ( + " mov %0, %1 \n" \ + " cpsid i \n" \ + " msr basepri, %0 \n" \ + " isb \n" \ + " dsb \n" \ + " cpsie i \n" \ + :"=r" (ulNewBASEPRI) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) : "memory" + ); +} + +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static uint32_t ulPortRaiseBASEPRI( void ) +{ +uint32_t ulOriginalBASEPRI, ulNewBASEPRI; + + __asm volatile + ( + " mrs %0, basepri \n" \ + " mov %1, %2 \n" \ + " cpsid i \n" \ + " msr basepri, %1 \n" \ + " isb \n" \ + " dsb \n" \ + " cpsie i \n" \ + :"=r" (ulOriginalBASEPRI), "=r" (ulNewBASEPRI) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) : "memory" + ); + + /* This return will not be reached but is necessary to prevent compiler + warnings. */ + return ulOriginalBASEPRI; +} +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static void vPortSetBASEPRI( uint32_t ulNewMaskValue ) +{ + __asm volatile + ( + " msr basepri, %0 " :: "r" ( ulNewMaskValue ) : "memory" + ); +} +/*-----------------------------------------------------------*/ + + +#ifdef __cplusplus +} +#endif + +#endif /* PORTMACRO_H */ +
diff --git a/Source/portable/GCC/ARM_CM7_MPU/ReadMe.txt b/Source/portable/GCC/ARM_CM7_MPU/ReadMe.txt new file mode 100644 index 0000000..ff4e74c --- /dev/null +++ b/Source/portable/GCC/ARM_CM7_MPU/ReadMe.txt
@@ -0,0 +1,18 @@ +There are two options for running FreeRTOS on ARM Cortex-M7 microcontrollers. +The best option depends on the revision of the ARM Cortex-M7 core in use. The +revision is specified by an 'r' number, and a 'p' number, so will look something +like 'r0p1'. Check the documentation for the microcontroller in use to find the +revision of the Cortex-M7 core used in that microcontroller. If in doubt, use +the FreeRTOS port provided specifically for r0p1 revisions, as that can be used +with all core revisions. + +The first option is to use the ARM Cortex-M4F port, and the second option is to +use the Cortex-M7 r0p1 port - the latter containing a minor errata workaround. + +If the revision of the ARM Cortex-M7 core is not r0p1 then either option can be +used, but it is recommended to use the FreeRTOS ARM Cortex-M4F port located in +the /FreeRTOS/Source/portable/GCC/ARM_CM4F directory. + +If the revision of the ARM Cortex-M7 core is r0p1 then use the FreeRTOS ARM +Cortex-M7 r0p1 port located in the /FreeRTOS/Source/portable/GCC/ARM_CM7_GCC/r0p1 +directory.
diff --git a/Source/portable/GCC/ARM_CM7_MPU/r0p1/port.c b/Source/portable/GCC/ARM_CM7_MPU/r0p1/port.c new file mode 100644 index 0000000..1243f47 --- /dev/null +++ b/Source/portable/GCC/ARM_CM7_MPU/r0p1/port.c
@@ -0,0 +1,978 @@ +/* + * FreeRTOS Kernel V10.0.1 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +/*----------------------------------------------------------- + * Implementation of functions defined in portable.h + *----------------------------------------------------------*/ + +/* Defining MPU_WRAPPERS_INCLUDED_FROM_API_FILE prevents task.h from redefining +all the API functions to use the MPU wrappers. That should only be done when +task.h is included from an application file. */ +#define MPU_WRAPPERS_INCLUDED_FROM_API_FILE + +/* Scheduler includes. */ +#include "FreeRTOS.h" +#include "task.h" + +#ifndef __VFP_FP__ + #error This port can only be used when the project options are configured to enable hardware floating point support. +#endif + +#undef MPU_WRAPPERS_INCLUDED_FROM_API_FILE + + +#ifndef configSYSTICK_CLOCK_HZ + #define configSYSTICK_CLOCK_HZ configCPU_CLOCK_HZ +#endif + +/* Constants required to access and manipulate the NVIC. */ +#define portNVIC_SYSTICK_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000e010 ) ) +#define portNVIC_SYSTICK_LOAD_REG ( * ( ( volatile uint32_t * ) 0xe000e014 ) ) +#define portNVIC_SYSTICK_CURRENT_VALUE_REG ( * ( ( volatile uint32_t * ) 0xe000e018 ) ) +#define portNVIC_SYSPRI2_REG ( * ( ( volatile uint32_t * ) 0xe000ed20 ) ) +#define portNVIC_SYSPRI1_REG ( * ( ( volatile uint32_t * ) 0xe000ed1c ) ) +#define portNVIC_SYS_CTRL_STATE_REG ( * ( ( volatile uint32_t * ) 0xe000ed24 ) ) +#define portNVIC_MEM_FAULT_ENABLE ( 1UL << 16UL ) + +/* Constants required to access and manipulate the MPU. */ +#define portMPU_TYPE_REG ( * ( ( volatile uint32_t * ) 0xe000ed90 ) ) +#define portMPU_REGION_BASE_ADDRESS_REG ( * ( ( volatile uint32_t * ) 0xe000ed9C ) ) +#define portMPU_REGION_ATTRIBUTE_REG ( * ( ( volatile uint32_t * ) 0xe000edA0 ) ) +#define portMPU_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000ed94 ) ) +#define portEXPECTED_MPU_TYPE_VALUE ( 8UL << 8UL ) /* 8 regions, unified. */ +#define portMPU_ENABLE ( 0x01UL ) +#define portMPU_BACKGROUND_ENABLE ( 1UL << 2UL ) +#define portPRIVILEGED_EXECUTION_START_ADDRESS ( 0UL ) +#define portMPU_REGION_VALID ( 0x10UL ) +#define portMPU_REGION_ENABLE ( 0x01UL ) +#define portPERIPHERALS_START_ADDRESS 0x40000000UL +#define portPERIPHERALS_END_ADDRESS 0x5FFFFFFFUL + +/* Constants required to access and manipulate the SysTick. */ +#define portNVIC_SYSTICK_CLK ( 0x00000004UL ) +#define portNVIC_SYSTICK_INT ( 0x00000002UL ) +#define portNVIC_SYSTICK_COUNT_FLAG ( 1UL << 16UL ) +#define portNVIC_SYSTICK_ENABLE ( 0x00000001UL ) +#define portNVIC_PENDSV_PRI ( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 16UL ) +#define portNVIC_SYSTICK_PRI ( ( ( uint32_t ) configKERNEL_INTERRUPT_PRIORITY ) << 24UL ) +#define portNVIC_SVC_PRI ( ( ( uint32_t ) configMAX_SYSCALL_INTERRUPT_PRIORITY - 1UL ) << 24UL ) + +/* Constants required to manipulate the VFP. */ +#define portFPCCR ( ( volatile uint32_t * ) 0xe000ef34UL ) /* Floating point context control register. */ +#define portASPEN_AND_LSPEN_BITS ( 0x3UL << 30UL ) + +/* Constants required to set up the initial stack. */ +#define portINITIAL_XPSR ( 0x01000000UL ) +#define portINITIAL_EXEC_RETURN ( 0xfffffffdUL ) +#define portINITIAL_CONTROL_IF_UNPRIVILEGED ( 0x03 ) +#define portINITIAL_CONTROL_IF_PRIVILEGED ( 0x02 ) + +/* Constants required to check the validity of an interrupt priority. */ +#define portFIRST_USER_INTERRUPT_NUMBER ( 16 ) +#define portNVIC_IP_REGISTERS_OFFSET_16 ( 0xE000E3F0 ) +#define portAIRCR_REG ( * ( ( volatile uint32_t * ) 0xE000ED0C ) ) +#define portMAX_8_BIT_VALUE ( ( uint8_t ) 0xff ) +#define portTOP_BIT_OF_BYTE ( ( uint8_t ) 0x80 ) +#define portMAX_PRIGROUP_BITS ( ( uint8_t ) 7 ) +#define portPRIORITY_GROUP_MASK ( 0x07UL << 8UL ) +#define portPRIGROUP_SHIFT ( 8UL ) + +/* Offsets in the stack to the parameters when inside the SVC handler. */ +#define portOFFSET_TO_PC ( 6 ) + +/* The systick is a 24-bit counter. */ +#define portMAX_24_BIT_NUMBER ( 0xffffffUL ) + +/* A fiddle factor to estimate the number of SysTick counts that would have +occurred while the SysTick counter is stopped during tickless idle +calculations. */ +#define portMISSED_COUNTS_FACTOR ( 45UL ) + +/* For strict compliance with the Cortex-M spec the task start address should +have bit-0 clear, as it is loaded into the PC on exit from an ISR. */ +#define portSTART_ADDRESS_MASK ( ( StackType_t ) 0xfffffffeUL ) + +/* Each task maintains its own interrupt status in the critical nesting +variable. Note this is not saved as part of the task context as context +switches can only occur when uxCriticalNesting is zero. */ +static UBaseType_t uxCriticalNesting = 0xaaaaaaaa; + +/* + * Setup the timer to generate the tick interrupts. The implementation in this + * file is weak to allow application writers to change the timer used to + * generate the tick interrupt. + */ +void vPortSetupTimerInterrupt( void ); + +/* + * Configure a number of standard MPU regions that are used by all tasks. + */ +static void prvSetupMPU( void ) PRIVILEGED_FUNCTION; + +/* + * Return the smallest MPU region size that a given number of bytes will fit + * into. The region size is returned as the value that should be programmed + * into the region attribute register for that region. + */ +static uint32_t prvGetMPURegionSizeSetting( uint32_t ulActualSizeInBytes ) PRIVILEGED_FUNCTION; + +/* + * Checks to see if being called from the context of an unprivileged task, and + * if so raises the privilege level and returns false - otherwise does nothing + * other than return true. + */ +BaseType_t xPortRaisePrivilege( void ) __attribute__(( naked )); + +/* + * Standard FreeRTOS exception handlers. + */ +void xPortPendSVHandler( void ) __attribute__ (( naked )) PRIVILEGED_FUNCTION; +void xPortSysTickHandler( void ) __attribute__ ((optimize("3"))) PRIVILEGED_FUNCTION; +void vPortSVCHandler( void ) __attribute__ (( naked )) PRIVILEGED_FUNCTION; + +/* + * Starts the scheduler by restoring the context of the first task to run. + */ +static void prvRestoreContextOfFirstTask( void ) __attribute__(( naked )) PRIVILEGED_FUNCTION; + +/* + * C portion of the SVC handler. The SVC handler is split between an asm entry + * and a C wrapper for simplicity of coding and maintenance. + */ +static void prvSVCHandler( uint32_t *pulRegisters ) __attribute__(( noinline )) PRIVILEGED_FUNCTION; + +/* + * Function to enable the VFP. + */ + static void vPortEnableVFP( void ) __attribute__ (( naked )); + +/* + * The number of SysTick increments that make up one tick period. + */ +#if configUSE_TICKLESS_IDLE == 1 + static uint32_t ulTimerCountsForOneTick = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * The maximum number of tick periods that can be suppressed is limited by the + * 24 bit resolution of the SysTick timer. + */ +#if configUSE_TICKLESS_IDLE == 1 + static uint32_t xMaximumPossibleSuppressedTicks = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * Compensate for the CPU cycles that pass while the SysTick is stopped (low + * power functionality only. + */ +#if configUSE_TICKLESS_IDLE == 1 + static uint32_t ulStoppedTimerCompensation = 0; +#endif /* configUSE_TICKLESS_IDLE */ + +/* + * Used by the portASSERT_IF_INTERRUPT_PRIORITY_INVALID() macro to ensure + * FreeRTOS API functions are not called from interrupts that have been assigned + * a priority above configMAX_SYSCALL_INTERRUPT_PRIORITY. + */ +#if ( configASSERT_DEFINED == 1 ) + static uint8_t ucMaxSysCallPriority = 0; + static uint32_t ulMaxPRIGROUPValue = 0; + static const volatile uint8_t * const pcInterruptPriorityRegisters = ( const volatile uint8_t * const ) portNVIC_IP_REGISTERS_OFFSET_16; +#endif /* configASSERT_DEFINED */ + +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +StackType_t *pxPortInitialiseStack( StackType_t *pxTopOfStack, TaskFunction_t pxCode, void *pvParameters, BaseType_t xRunPrivileged ) +{ + /* Simulate the stack frame as it would be created by a context switch + interrupt. */ + pxTopOfStack--; /* Offset added to account for the way the MCU uses the stack on entry/exit of interrupts. */ + *pxTopOfStack = portINITIAL_XPSR; /* xPSR */ + pxTopOfStack--; + *pxTopOfStack = ( ( StackType_t ) pxCode ) & portSTART_ADDRESS_MASK; /* PC */ + pxTopOfStack--; + *pxTopOfStack = 0; /* LR */ + pxTopOfStack -= 5; /* R12, R3, R2 and R1. */ + *pxTopOfStack = ( StackType_t ) pvParameters; /* R0 */ + + /* A save method is being used that requires each task to maintain its + own exec return value. */ + pxTopOfStack--; + *pxTopOfStack = portINITIAL_EXEC_RETURN; + + pxTopOfStack -= 9; /* R11, R10, R9, R8, R7, R6, R5 and R4. */ + + if( xRunPrivileged == pdTRUE ) + { + *pxTopOfStack = portINITIAL_CONTROL_IF_PRIVILEGED; + } + else + { + *pxTopOfStack = portINITIAL_CONTROL_IF_UNPRIVILEGED; + } + + return pxTopOfStack; +} +/*-----------------------------------------------------------*/ + +void vPortSVCHandler( void ) +{ + /* Assumes psp was in use. */ + __asm volatile + ( + #ifndef USE_PROCESS_STACK /* Code should not be required if a main() is using the process stack. */ + " tst lr, #4 \n" + " ite eq \n" + " mrseq r0, msp \n" + " mrsne r0, psp \n" + #else + " mrs r0, psp \n" + #endif + " b %0 \n" + ::"i"(prvSVCHandler):"r0" + ); +} +/*-----------------------------------------------------------*/ + +static void prvSVCHandler( uint32_t *pulParam ) +{ +uint8_t ucSVCNumber; + + /* The stack contains: r0, r1, r2, r3, r12, r14, the return address and + xPSR. The first argument (r0) is pulParam[ 0 ]. */ + ucSVCNumber = ( ( uint8_t * ) pulParam[ portOFFSET_TO_PC ] )[ -2 ]; + switch( ucSVCNumber ) + { + case portSVC_START_SCHEDULER : portNVIC_SYSPRI1_REG |= portNVIC_SVC_PRI; + prvRestoreContextOfFirstTask(); + break; + + case portSVC_YIELD : portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; + /* Barriers are normally not required + but do ensure the code is completely + within the specified behaviour for the + architecture. */ + __asm volatile( "dsb" ); + __asm volatile( "isb" ); + + break; + + case portSVC_RAISE_PRIVILEGE : __asm volatile + ( + " mrs r1, control \n" /* Obtain current control value. */ + " bic r1, #1 \n" /* Set privilege bit. */ + " msr control, r1 \n" /* Write back new control value. */ + :::"r1" + ); + break; + + default : /* Unknown SVC call. */ + break; + } +} +/*-----------------------------------------------------------*/ + +static void prvRestoreContextOfFirstTask( void ) +{ + __asm volatile + ( + " ldr r0, =0xE000ED08 \n" /* Use the NVIC offset register to locate the stack. */ + " ldr r0, [r0] \n" + " ldr r0, [r0] \n" + " msr msp, r0 \n" /* Set the msp back to the start of the stack. */ + " ldr r3, pxCurrentTCBConst2 \n" /* Restore the context. */ + " ldr r1, [r3] \n" + " ldr r0, [r1] \n" /* The first item in the TCB is the task top of stack. */ + " add r1, r1, #4 \n" /* Move onto the second item in the TCB... */ + " ldr r2, =0xe000ed9c \n" /* Region Base Address register. */ + " ldmia r1!, {r4-r11} \n" /* Read 4 sets of MPU registers. */ + " stmia r2!, {r4-r11} \n" /* Write 4 sets of MPU registers. */ + " ldmia r0!, {r3-r11, r14} \n" /* Pop the registers that are not automatically saved on exception entry. */ + " msr control, r3 \n" + " msr psp, r0 \n" /* Restore the task stack pointer. */ + " mov r0, #0 \n" + " msr basepri, r0 \n" + " bx r14 \n" + " \n" + " .align 4 \n" + "pxCurrentTCBConst2: .word pxCurrentTCB \n" + ); +} +/*-----------------------------------------------------------*/ + +/* + * See header file for description. + */ +BaseType_t xPortStartScheduler( void ) +{ + /* configMAX_SYSCALL_INTERRUPT_PRIORITY must not be set to 0. See + http://www.FreeRTOS.org/RTOS-Cortex-M3-M4.html */ + configASSERT( ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) ); + + #if( configASSERT_DEFINED == 1 ) + { + volatile uint32_t ulOriginalPriority; + volatile uint8_t * const pucFirstUserPriorityRegister = ( volatile uint8_t * const ) ( portNVIC_IP_REGISTERS_OFFSET_16 + portFIRST_USER_INTERRUPT_NUMBER ); + volatile uint8_t ucMaxPriorityValue; + + /* Determine the maximum priority from which ISR safe FreeRTOS API + functions can be called. ISR safe functions are those that end in + "FromISR". FreeRTOS maintains separate thread and ISR API functions to + ensure interrupt entry is as fast and simple as possible. + + Save the interrupt priority value that is about to be clobbered. */ + ulOriginalPriority = *pucFirstUserPriorityRegister; + + /* Determine the number of priority bits available. First write to all + possible bits. */ + *pucFirstUserPriorityRegister = portMAX_8_BIT_VALUE; + + /* Read the value back to see how many bits stuck. */ + ucMaxPriorityValue = *pucFirstUserPriorityRegister; + + /* Use the same mask on the maximum system call priority. */ + ucMaxSysCallPriority = configMAX_SYSCALL_INTERRUPT_PRIORITY & ucMaxPriorityValue; + + /* Calculate the maximum acceptable priority group value for the number + of bits read back. */ + ulMaxPRIGROUPValue = portMAX_PRIGROUP_BITS; + while( ( ucMaxPriorityValue & portTOP_BIT_OF_BYTE ) == portTOP_BIT_OF_BYTE ) + { + ulMaxPRIGROUPValue--; + ucMaxPriorityValue <<= ( uint8_t ) 0x01; + } + + /* Shift the priority group value back to its position within the AIRCR + register. */ + ulMaxPRIGROUPValue <<= portPRIGROUP_SHIFT; + ulMaxPRIGROUPValue &= portPRIORITY_GROUP_MASK; + + /* Restore the clobbered interrupt priority register to its original + value. */ + *pucFirstUserPriorityRegister = ulOriginalPriority; + } + #endif /* conifgASSERT_DEFINED */ + + /* Make PendSV and SysTick the same priority as the kernel, and the SVC + handler higher priority so it can be used to exit a critical section (where + lower priorities are masked). */ + portNVIC_SYSPRI2_REG |= portNVIC_PENDSV_PRI; + portNVIC_SYSPRI2_REG |= portNVIC_SYSTICK_PRI; + + /* Configure the regions in the MPU that are common to all tasks. */ + prvSetupMPU(); + + /* Start the timer that generates the tick ISR. Interrupts are disabled + here already. */ + vPortSetupTimerInterrupt(); + + /* Initialise the critical nesting count ready for the first task. */ + uxCriticalNesting = 0; + + /* Ensure the VFP is enabled - it should be anyway. */ + vPortEnableVFP(); + + /* Lazy save always. */ + *( portFPCCR ) |= portASPEN_AND_LSPEN_BITS; + + /* Start the first task. */ + __asm volatile( + " ldr r0, =0xE000ED08 \n" /* Use the NVIC offset register to locate the stack. */ + " ldr r0, [r0] \n" + " ldr r0, [r0] \n" + " msr msp, r0 \n" /* Set the msp back to the start of the stack. */ + " cpsie i \n" /* Globally enable interrupts. */ + " cpsie f \n" + " dsb \n" + " isb \n" + " svc %0 \n" /* System call to start first task. */ + " nop \n" + :: "i" (portSVC_START_SCHEDULER) ); + + /* Should not get here! */ + return 0; +} +/*-----------------------------------------------------------*/ + +void vPortEndScheduler( void ) +{ + /* Not implemented in ports where there is nothing to return to. + Artificially force an assert. */ + configASSERT( uxCriticalNesting == 1000UL ); +} +/*-----------------------------------------------------------*/ + +void vPortEnterCritical( void ) +{ +BaseType_t xRunningPrivileged = xPortRaisePrivilege(); + + portDISABLE_INTERRUPTS(); + uxCriticalNesting++; + + vPortResetPrivilege( xRunningPrivileged ); +} +/*-----------------------------------------------------------*/ + +void vPortExitCritical( void ) +{ +BaseType_t xRunningPrivileged = xPortRaisePrivilege(); + + configASSERT( uxCriticalNesting ); + uxCriticalNesting--; + if( uxCriticalNesting == 0 ) + { + portENABLE_INTERRUPTS(); + } + vPortResetPrivilege( xRunningPrivileged ); +} +/*-----------------------------------------------------------*/ + +void xPortPendSVHandler( void ) +{ + /* This is a naked function. */ + + __asm volatile + ( + " mrs r0, psp \n" + " \n" + " ldr r3, pxCurrentTCBConst \n" /* Get the location of the current TCB. */ + " ldr r2, [r3] \n" + " \n" + " tst r14, #0x10 \n" /* Is the task using the FPU context? If so, push high vfp registers. */ + " it eq \n" + " vstmdbeq r0!, {s16-s31} \n" + " \n" + " mrs r1, control \n" + " stmdb r0!, {r1, r4-r11, r14} \n" /* Save the remaining registers. */ + " str r0, [r2] \n" /* Save the new top of stack into the first member of the TCB. */ + " \n" + " stmdb sp!, {r3} \n" + " mov r0, %0 \n" + " cpsid i \n" /* Errata workaround. */ + " msr basepri, r0 \n" + " dsb \n" + " isb \n" + " cpsie i \n" /* Errata workaround. */ + " bl vTaskSwitchContext \n" + " mov r0, #0 \n" + " msr basepri, r0 \n" + " ldmia sp!, {r3} \n" + " \n" /* Restore the context. */ + " ldr r1, [r3] \n" + " ldr r0, [r1] \n" /* The first item in the TCB is the task top of stack. */ + " add r1, r1, #4 \n" /* Move onto the second item in the TCB... */ + " ldr r2, =0xe000ed9c \n" /* Region Base Address register. */ + " ldmia r1!, {r4-r11} \n" /* Read 4 sets of MPU registers. */ + " stmia r2!, {r4-r11} \n" /* Write 4 sets of MPU registers. */ + " ldmia r0!, {r3-r11, r14} \n" /* Pop the registers that are not automatically saved on exception entry. */ + " msr control, r3 \n" + " \n" + " tst r14, #0x10 \n" /* Is the task using the FPU context? If so, pop the high vfp registers too. */ + " it eq \n" + " vldmiaeq r0!, {s16-s31} \n" + " \n" + " msr psp, r0 \n" + " bx r14 \n" + " \n" + " .align 4 \n" + "pxCurrentTCBConst: .word pxCurrentTCB \n" + ::"i"(configMAX_SYSCALL_INTERRUPT_PRIORITY) + ); +} +/*-----------------------------------------------------------*/ + +void xPortSysTickHandler( void ) +{ +uint32_t ulDummy; + + ulDummy = portSET_INTERRUPT_MASK_FROM_ISR(); + { + /* Increment the RTOS tick. */ + if( xTaskIncrementTick() != pdFALSE ) + { + /* Pend a context switch. */ + portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; + } + } + portCLEAR_INTERRUPT_MASK_FROM_ISR( ulDummy ); +} +/*-----------------------------------------------------------*/ + +#if configUSE_TICKLESS_IDLE == 1 + + __attribute__((weak)) void vPortSuppressTicksAndSleep( TickType_t xExpectedIdleTime ) + { + uint32_t ulReloadValue, ulCompleteTickPeriods, ulCompletedSysTickDecrements, ulSysTickCTRL; + TickType_t xModifiableIdleTime; + + /* Make sure the SysTick reload value does not overflow the counter. */ + if( xExpectedIdleTime > xMaximumPossibleSuppressedTicks ) + { + xExpectedIdleTime = xMaximumPossibleSuppressedTicks; + } + + /* Stop the SysTick momentarily. The time the SysTick is stopped for + is accounted for as best it can be, but using the tickless mode will + inevitably result in some tiny drift of the time maintained by the + kernel with respect to calendar time. */ + portNVIC_SYSTICK_CTRL_REG &= ~portNVIC_SYSTICK_ENABLE; + + /* Calculate the reload value required to wait xExpectedIdleTime + tick periods. -1 is used because this code will execute part way + through one of the tick periods. */ + ulReloadValue = portNVIC_SYSTICK_CURRENT_VALUE_REG + ( ulTimerCountsForOneTick * ( xExpectedIdleTime - 1UL ) ); + if( ulReloadValue > ulStoppedTimerCompensation ) + { + ulReloadValue -= ulStoppedTimerCompensation; + } + + /* Enter a critical section but don't use the taskENTER_CRITICAL() + method as that will mask interrupts that should exit sleep mode. */ + __asm volatile( "cpsid i" ); + __asm volatile( "dsb" ); + __asm volatile( "isb" ); + + /* If a context switch is pending or a task is waiting for the scheduler + to be unsuspended then abandon the low power entry. */ + if( eTaskConfirmSleepModeStatus() == eAbortSleep ) + { + /* Restart from whatever is left in the count register to complete + this tick period. */ + portNVIC_SYSTICK_LOAD_REG = portNVIC_SYSTICK_CURRENT_VALUE_REG; + + /* Restart SysTick. */ + portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE; + + /* Reset the reload register to the value required for normal tick + periods. */ + portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL; + + /* Re-enable interrupts - see comments above the cpsid instruction() + above. */ + __asm volatile( "cpsie i" ); + } + else + { + /* Set the new reload value. */ + portNVIC_SYSTICK_LOAD_REG = ulReloadValue; + + /* Clear the SysTick count flag and set the count value back to + zero. */ + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + + /* Restart SysTick. */ + portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE; + + /* Sleep until something happens. configPRE_SLEEP_PROCESSING() can + set its parameter to 0 to indicate that its implementation contains + its own wait for interrupt or wait for event instruction, and so wfi + should not be executed again. However, the original expected idle + time variable must remain unmodified, so a copy is taken. */ + xModifiableIdleTime = xExpectedIdleTime; + configPRE_SLEEP_PROCESSING( &xModifiableIdleTime ); + if( xModifiableIdleTime > 0 ) + { + __asm volatile( "dsb" ); + __asm volatile( "wfi" ); + __asm volatile( "isb" ); + } + configPOST_SLEEP_PROCESSING( &xExpectedIdleTime ); + + /* Stop SysTick. Again, the time the SysTick is stopped for is + accounted for as best it can be, but using the tickless mode will + inevitably result in some tiny drift of the time maintained by the + kernel with respect to calendar time. */ + ulSysTickCTRL = portNVIC_SYSTICK_CTRL_REG; + portNVIC_SYSTICK_CTRL_REG = ( ulSysTickCTRL & ~portNVIC_SYSTICK_ENABLE ); + + /* Re-enable interrupts - see comments above the cpsid instruction() + above. */ + __asm volatile( "cpsie i" ); + + if( ( ulSysTickCTRL & portNVIC_SYSTICK_COUNT_FLAG ) != 0 ) + { + uint32_t ulCalculatedLoadValue; + + /* The tick interrupt has already executed, and the SysTick + count reloaded with ulReloadValue. Reset the + portNVIC_SYSTICK_LOAD_REG with whatever remains of this tick + period. */ + ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ) - ( ulReloadValue - portNVIC_SYSTICK_CURRENT_VALUE_REG ); + + /* Don't allow a tiny value, or values that have somehow + underflowed because the post sleep hook did something + that took too long. */ + if( ( ulCalculatedLoadValue < ulStoppedTimerCompensation ) || ( ulCalculatedLoadValue > ulTimerCountsForOneTick ) ) + { + ulCalculatedLoadValue = ( ulTimerCountsForOneTick - 1UL ); + } + + portNVIC_SYSTICK_LOAD_REG = ulCalculatedLoadValue; + + /* The tick interrupt handler will already have pended the tick + processing in the kernel. As the pending tick will be + processed as soon as this function exits, the tick value + maintained by the tick is stepped forward by one less than the + time spent waiting. */ + ulCompleteTickPeriods = xExpectedIdleTime - 1UL; + } + else + { + /* Something other than the tick interrupt ended the sleep. + Work out how long the sleep lasted rounded to complete tick + periods (not the ulReload value which accounted for part + ticks). */ + ulCompletedSysTickDecrements = ( xExpectedIdleTime * ulTimerCountsForOneTick ) - portNVIC_SYSTICK_CURRENT_VALUE_REG; + + /* How many complete tick periods passed while the processor + was waiting? */ + ulCompleteTickPeriods = ulCompletedSysTickDecrements / ulTimerCountsForOneTick; + + /* The reload value is set to whatever fraction of a single tick + period remains. */ + portNVIC_SYSTICK_LOAD_REG = ( ( ulCompleteTickPeriods + 1UL ) * ulTimerCountsForOneTick ) - ulCompletedSysTickDecrements; + } + + /* Restart SysTick so it runs from portNVIC_SYSTICK_LOAD_REG + again, then set portNVIC_SYSTICK_LOAD_REG back to its standard + value. The critical section is used to ensure the tick interrupt + can only execute once in the case that the reload register is near + zero. */ + portNVIC_SYSTICK_CURRENT_VALUE_REG = 0UL; + portENTER_CRITICAL(); + { + portNVIC_SYSTICK_CTRL_REG |= portNVIC_SYSTICK_ENABLE; + vTaskStepTick( ulCompleteTickPeriods ); + portNVIC_SYSTICK_LOAD_REG = ulTimerCountsForOneTick - 1UL; + } + portEXIT_CRITICAL(); + } + } + +#endif /* #if configUSE_TICKLESS_IDLE */ + +/*-----------------------------------------------------------*/ + +/* + * Setup the systick timer to generate the tick interrupts at the required + * frequency. + */ +__attribute__(( weak )) void vPortSetupTimerInterrupt( void ) +{ + /* Calculate the constants required to configure the tick interrupt. */ + #if configUSE_TICKLESS_IDLE == 1 + { + ulTimerCountsForOneTick = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ); + xMaximumPossibleSuppressedTicks = portMAX_24_BIT_NUMBER / ulTimerCountsForOneTick; + ulStoppedTimerCompensation = portMISSED_COUNTS_FACTOR / ( configCPU_CLOCK_HZ / configSYSTICK_CLOCK_HZ ); + } + #endif /* configUSE_TICKLESS_IDLE */ + + /* Configure SysTick to interrupt at the requested rate. */ + portNVIC_SYSTICK_LOAD_REG = ( configSYSTICK_CLOCK_HZ / configTICK_RATE_HZ ) - 1UL; + portNVIC_SYSTICK_CTRL_REG = ( portNVIC_SYSTICK_CLK | portNVIC_SYSTICK_INT | portNVIC_SYSTICK_ENABLE ); +} + +/*-----------------------------------------------------------*/ + +/* This is a naked function. */ +static void vPortEnableVFP( void ) +{ + __asm volatile + ( + " ldr.w r0, =0xE000ED88 \n" /* The FPU enable bits are in the CPACR. */ + " ldr r1, [r0] \n" + " \n" + " orr r1, r1, #( 0xf << 20 ) \n" /* Enable CP10 and CP11 coprocessors, then save back. */ + " str r1, [r0] \n" + " bx r14 " + ); +} +/*-----------------------------------------------------------*/ + +static void prvSetupMPU( void ) +{ +extern uint32_t __privileged_functions_end__[]; +extern uint32_t __FLASH_segment_start__[]; +extern uint32_t __FLASH_segment_end__[]; +extern uint32_t __privileged_data_start__[]; +extern uint32_t __privileged_data_end__[]; + + /* First setup the entire flash for unprivileged read only access. */ + portMPU_REGION_BASE_ADDRESS_REG = ( ( uint32_t ) __FLASH_segment_start__ ) | /* Base address. */ + ( portMPU_REGION_VALID ) | + ( portUNPRIVILEGED_FLASH_REGION ); + + portMPU_REGION_ATTRIBUTE_REG = ( portMPU_REGION_READ_ONLY ) | + ( portMPU_REGION_CACHEABLE_BUFFERABLE ) | + ( prvGetMPURegionSizeSetting( ( uint32_t ) __FLASH_segment_end__ - ( uint32_t ) __FLASH_segment_start__ ) ) | + ( portMPU_REGION_ENABLE ); + + /* Setup the first 16K for privileged only access (even though less + than 10K is actually being used). This is where the kernel code is + placed. */ + portMPU_REGION_BASE_ADDRESS_REG = ( ( uint32_t ) __FLASH_segment_start__ ) | /* Base address. */ + ( portMPU_REGION_VALID ) | + ( portPRIVILEGED_FLASH_REGION ); + + portMPU_REGION_ATTRIBUTE_REG = ( portMPU_REGION_PRIVILEGED_READ_ONLY ) | + ( portMPU_REGION_CACHEABLE_BUFFERABLE ) | + ( prvGetMPURegionSizeSetting( ( uint32_t ) __privileged_functions_end__ - ( uint32_t ) __FLASH_segment_start__ ) ) | + ( portMPU_REGION_ENABLE ); + + /* Setup the privileged data RAM region. This is where the kernel data + is placed. */ + portMPU_REGION_BASE_ADDRESS_REG = ( ( uint32_t ) __privileged_data_start__ ) | /* Base address. */ + ( portMPU_REGION_VALID ) | + ( portPRIVILEGED_RAM_REGION ); + + portMPU_REGION_ATTRIBUTE_REG = ( portMPU_REGION_PRIVILEGED_READ_WRITE ) | + ( portMPU_REGION_CACHEABLE_BUFFERABLE ) | + prvGetMPURegionSizeSetting( ( uint32_t ) __privileged_data_end__ - ( uint32_t ) __privileged_data_start__ ) | + ( portMPU_REGION_ENABLE ); + + /* By default allow everything to access the general peripherals. The + system peripherals and registers are protected. */ + portMPU_REGION_BASE_ADDRESS_REG = ( portPERIPHERALS_START_ADDRESS ) | + ( portMPU_REGION_VALID ) | + ( portGENERAL_PERIPHERALS_REGION ); + + portMPU_REGION_ATTRIBUTE_REG = ( portMPU_REGION_READ_WRITE | portMPU_REGION_EXECUTE_NEVER ) | + ( prvGetMPURegionSizeSetting( portPERIPHERALS_END_ADDRESS - portPERIPHERALS_START_ADDRESS ) ) | + ( portMPU_REGION_ENABLE ); + + /* Enable the memory fault exception. */ + portNVIC_SYS_CTRL_STATE_REG |= portNVIC_MEM_FAULT_ENABLE; + + /* Enable the MPU with the background region configured. */ + portMPU_CTRL_REG |= ( portMPU_ENABLE | portMPU_BACKGROUND_ENABLE ); +} +/*-----------------------------------------------------------*/ + +static uint32_t prvGetMPURegionSizeSetting( uint32_t ulActualSizeInBytes ) +{ +uint32_t ulRegionSize, ulReturnValue = 4; + + /* 32 is the smallest region size, 31 is the largest valid value for + ulReturnValue. */ + for( ulRegionSize = 32UL; ulReturnValue < 31UL; ( ulRegionSize <<= 1UL ) ) + { + if( ulActualSizeInBytes <= ulRegionSize ) + { + break; + } + else + { + ulReturnValue++; + } + } + + /* Shift the code by one before returning so it can be written directly + into the the correct bit position of the attribute register. */ + return ( ulReturnValue << 1UL ); +} +/*-----------------------------------------------------------*/ + +BaseType_t xPortRaisePrivilege( void ) +{ + __asm volatile + ( + " mrs r0, control \n" + " tst r0, #1 \n" /* Is the task running privileged? */ + " itte ne \n" + " movne r0, #0 \n" /* CONTROL[0]!=0, return false. */ + " svcne %0 \n" /* Switch to privileged. */ + " moveq r0, #1 \n" /* CONTROL[0]==0, return true. */ + " bx lr \n" + :: "i" (portSVC_RAISE_PRIVILEGE) : "r0" + ); + + return 0; +} +/*-----------------------------------------------------------*/ + +void vPortStoreTaskMPUSettings( xMPU_SETTINGS *xMPUSettings, const struct xMEMORY_REGION * const xRegions, StackType_t *pxBottomOfStack, uint32_t ulStackDepth ) +{ +extern uint32_t __SRAM_segment_start__[]; +extern uint32_t __SRAM_segment_end__[]; +extern uint32_t __privileged_data_start__[]; +extern uint32_t __privileged_data_end__[]; +int32_t lIndex; +uint32_t ul; + + if( xRegions == NULL ) + { + /* No MPU regions are specified so allow access to all RAM. */ + xMPUSettings->xRegion[ 0 ].ulRegionBaseAddress = + ( ( uint32_t ) __SRAM_segment_start__ ) | /* Base address. */ + ( portMPU_REGION_VALID ) | + ( portSTACK_REGION ); + + xMPUSettings->xRegion[ 0 ].ulRegionAttribute = + ( portMPU_REGION_READ_WRITE ) | + ( portMPU_REGION_CACHEABLE_BUFFERABLE ) | + ( prvGetMPURegionSizeSetting( ( uint32_t ) __SRAM_segment_end__ - ( uint32_t ) __SRAM_segment_start__ ) ) | + ( portMPU_REGION_ENABLE ); + + /* Re-instate the privileged only RAM region as xRegion[ 0 ] will have + just removed the privileged only parameters. */ + xMPUSettings->xRegion[ 1 ].ulRegionBaseAddress = + ( ( uint32_t ) __privileged_data_start__ ) | /* Base address. */ + ( portMPU_REGION_VALID ) | + ( portSTACK_REGION + 1 ); + + xMPUSettings->xRegion[ 1 ].ulRegionAttribute = + ( portMPU_REGION_PRIVILEGED_READ_WRITE ) | + ( portMPU_REGION_CACHEABLE_BUFFERABLE ) | + prvGetMPURegionSizeSetting( ( uint32_t ) __privileged_data_end__ - ( uint32_t ) __privileged_data_start__ ) | + ( portMPU_REGION_ENABLE ); + + /* Invalidate all other regions. */ + for( ul = 2; ul <= portNUM_CONFIGURABLE_REGIONS; ul++ ) + { + xMPUSettings->xRegion[ ul ].ulRegionBaseAddress = ( portSTACK_REGION + ul ) | portMPU_REGION_VALID; + xMPUSettings->xRegion[ ul ].ulRegionAttribute = 0UL; + } + } + else + { + /* This function is called automatically when the task is created - in + which case the stack region parameters will be valid. At all other + times the stack parameters will not be valid and it is assumed that the + stack region has already been configured. */ + if( ulStackDepth > 0 ) + { + /* Define the region that allows access to the stack. */ + xMPUSettings->xRegion[ 0 ].ulRegionBaseAddress = + ( ( uint32_t ) pxBottomOfStack ) | + ( portMPU_REGION_VALID ) | + ( portSTACK_REGION ); /* Region number. */ + + xMPUSettings->xRegion[ 0 ].ulRegionAttribute = + ( portMPU_REGION_READ_WRITE ) | /* Read and write. */ + ( prvGetMPURegionSizeSetting( ulStackDepth * ( uint32_t ) sizeof( StackType_t ) ) ) | + ( portMPU_REGION_CACHEABLE_BUFFERABLE ) | + ( portMPU_REGION_ENABLE ); + } + + lIndex = 0; + + for( ul = 1; ul <= portNUM_CONFIGURABLE_REGIONS; ul++ ) + { + if( ( xRegions[ lIndex ] ).ulLengthInBytes > 0UL ) + { + /* Translate the generic region definition contained in + xRegions into the CM3 specific MPU settings that are then + stored in xMPUSettings. */ + xMPUSettings->xRegion[ ul ].ulRegionBaseAddress = + ( ( uint32_t ) xRegions[ lIndex ].pvBaseAddress ) | + ( portMPU_REGION_VALID ) | + ( portSTACK_REGION + ul ); /* Region number. */ + + xMPUSettings->xRegion[ ul ].ulRegionAttribute = + ( prvGetMPURegionSizeSetting( xRegions[ lIndex ].ulLengthInBytes ) ) | + ( xRegions[ lIndex ].ulParameters ) | + ( portMPU_REGION_ENABLE ); + } + else + { + /* Invalidate the region. */ + xMPUSettings->xRegion[ ul ].ulRegionBaseAddress = ( portSTACK_REGION + ul ) | portMPU_REGION_VALID; + xMPUSettings->xRegion[ ul ].ulRegionAttribute = 0UL; + } + + lIndex++; + } + } +} +/*-----------------------------------------------------------*/ + +#if( configASSERT_DEFINED == 1 ) + + void vPortValidateInterruptPriority( void ) + { + uint32_t ulCurrentInterrupt; + uint8_t ucCurrentPriority; + + /* Obtain the number of the currently executing interrupt. */ + __asm volatile( "mrs %0, ipsr" : "=r"( ulCurrentInterrupt ) ); + + /* Is the interrupt number a user defined interrupt? */ + if( ulCurrentInterrupt >= portFIRST_USER_INTERRUPT_NUMBER ) + { + /* Look up the interrupt's priority. */ + ucCurrentPriority = pcInterruptPriorityRegisters[ ulCurrentInterrupt ]; + + /* The following assertion will fail if a service routine (ISR) for + an interrupt that has been assigned a priority above + configMAX_SYSCALL_INTERRUPT_PRIORITY calls an ISR safe FreeRTOS API + function. ISR safe FreeRTOS API functions must *only* be called + from interrupts that have been assigned a priority at or below + configMAX_SYSCALL_INTERRUPT_PRIORITY. + + Numerically low interrupt priority numbers represent logically high + interrupt priorities, therefore the priority of the interrupt must + be set to a value equal to or numerically *higher* than + configMAX_SYSCALL_INTERRUPT_PRIORITY. + + Interrupts that use the FreeRTOS API must not be left at their + default priority of zero as that is the highest possible priority, + which is guaranteed to be above configMAX_SYSCALL_INTERRUPT_PRIORITY, + and therefore also guaranteed to be invalid. + + FreeRTOS maintains separate thread and ISR API functions to ensure + interrupt entry is as fast and simple as possible. + + The following links provide detailed information: + http://www.freertos.org/RTOS-Cortex-M3-M4.html + http://www.freertos.org/FAQHelp.html */ + configASSERT( ucCurrentPriority >= ucMaxSysCallPriority ); + } + + /* Priority grouping: The interrupt controller (NVIC) allows the bits + that define each interrupt's priority to be split between bits that + define the interrupt's pre-emption priority bits and bits that define + the interrupt's sub-priority. For simplicity all bits must be defined + to be pre-emption priority bits. The following assertion will fail if + this is not the case (if some bits represent a sub-priority). + + If the application only uses CMSIS libraries for interrupt + configuration then the correct setting can be achieved on all Cortex-M + devices by calling NVIC_SetPriorityGrouping( 0 ); before starting the + scheduler. Note however that some vendor specific peripheral libraries + assume a non-zero priority group setting, in which cases using a value + of zero will result in unpredicable behaviour. */ + configASSERT( ( portAIRCR_REG & portPRIORITY_GROUP_MASK ) <= ulMaxPRIGROUPValue ); + } + +#endif /* configASSERT_DEFINED */ +/*-----------------------------------------------------------*/ + +
diff --git a/Source/portable/GCC/ARM_CM7_MPU/r0p1/portmacro.h b/Source/portable/GCC/ARM_CM7_MPU/r0p1/portmacro.h new file mode 100644 index 0000000..be1d742 --- /dev/null +++ b/Source/portable/GCC/ARM_CM7_MPU/r0p1/portmacro.h
@@ -0,0 +1,293 @@ +/* + * FreeRTOS Kernel V10.0.1 + * Copyright (C) 2017 Amazon.com, Inc. or its affiliates. All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy of + * this software and associated documentation files (the "Software"), to deal in + * the Software without restriction, including without limitation the rights to + * use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of + * the Software, and to permit persons to whom the Software is furnished to do so, + * subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in all + * copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS + * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR + * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER + * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * http://www.FreeRTOS.org + * http://aws.amazon.com/freertos + * + * 1 tab == 4 spaces! + */ + +#ifndef PORTMACRO_H +#define PORTMACRO_H + +#ifdef __cplusplus +extern "C" { +#endif + +/*----------------------------------------------------------- + * Port specific definitions. + * + * The settings in this file configure FreeRTOS correctly for the + * given hardware and compiler. + * + * These settings should not be altered. + *----------------------------------------------------------- + */ + +/* Type definitions. */ +#define portCHAR char +#define portFLOAT float +#define portDOUBLE double +#define portLONG long +#define portSHORT short +#define portSTACK_TYPE uint32_t +#define portBASE_TYPE long + +typedef portSTACK_TYPE StackType_t; +typedef long BaseType_t; +typedef unsigned long UBaseType_t; + +#if( configUSE_16_BIT_TICKS == 1 ) + typedef uint16_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffff +#else + typedef uint32_t TickType_t; + #define portMAX_DELAY ( TickType_t ) 0xffffffffUL + + /* 32-bit tick type on a 32-bit architecture, so reads of the tick count do + not need to be guarded with a critical section. */ + #define portTICK_TYPE_IS_ATOMIC 1 +#endif +/*-----------------------------------------------------------*/ + +/* MPU specific constants. */ +#define portUSING_MPU_WRAPPERS 1 +#define portPRIVILEGE_BIT ( 0x80000000UL ) + +#define portMPU_REGION_READ_WRITE ( 0x03UL << 24UL ) +#define portMPU_REGION_PRIVILEGED_READ_ONLY ( 0x05UL << 24UL ) +#define portMPU_REGION_READ_ONLY ( 0x06UL << 24UL ) +#define portMPU_REGION_PRIVILEGED_READ_WRITE ( 0x01UL << 24UL ) +#define portMPU_REGION_CACHEABLE_BUFFERABLE ( 0x07UL << 16UL ) +#define portMPU_REGION_EXECUTE_NEVER ( 0x01UL << 28UL ) + +#define portUNPRIVILEGED_FLASH_REGION ( 0UL ) +#define portPRIVILEGED_FLASH_REGION ( 1UL ) +#define portPRIVILEGED_RAM_REGION ( 2UL ) +#define portGENERAL_PERIPHERALS_REGION ( 3UL ) +#define portSTACK_REGION ( 4UL ) +#define portFIRST_CONFIGURABLE_REGION ( 5UL ) +#define portLAST_CONFIGURABLE_REGION ( 7UL ) +#define portNUM_CONFIGURABLE_REGIONS ( ( portLAST_CONFIGURABLE_REGION - portFIRST_CONFIGURABLE_REGION ) + 1 ) +#define portTOTAL_NUM_REGIONS ( portNUM_CONFIGURABLE_REGIONS + 1 ) /* Plus one to make space for the stack region. */ + +#define portSWITCH_TO_USER_MODE() __asm volatile ( " mrs r0, control \n orr r0, #1 \n msr control, r0 " :::"r0" ) + +typedef struct MPU_REGION_REGISTERS +{ + uint32_t ulRegionBaseAddress; + uint32_t ulRegionAttribute; +} xMPU_REGION_REGISTERS; + +/* Plus 1 to create space for the stack region. */ +typedef struct MPU_SETTINGS +{ + xMPU_REGION_REGISTERS xRegion[ portTOTAL_NUM_REGIONS ]; +} xMPU_SETTINGS; + +/* Architecture specifics. */ +#define portSTACK_GROWTH ( -1 ) +#define portTICK_PERIOD_MS ( ( TickType_t ) 1000 / configTICK_RATE_HZ ) +#define portBYTE_ALIGNMENT 8 +/*-----------------------------------------------------------*/ + +/* SVC numbers for various services. */ +#define portSVC_START_SCHEDULER 0 +#define portSVC_YIELD 1 +#define portSVC_RAISE_PRIVILEGE 2 + +/* Scheduler utilities. */ + +#define portYIELD() __asm volatile ( " SVC %0 \n" :: "i" (portSVC_YIELD) ) +#define portYIELD_WITHIN_API() \ +{ \ + /* Set a PendSV to request a context switch. */ \ + portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT; \ + \ + /* Barriers are normally not required but do ensure the code is completely \ + within the specified behaviour for the architecture. */ \ + __asm volatile( "dsb" ); \ + __asm volatile( "isb" ); \ +} + +#define portNVIC_INT_CTRL_REG ( * ( ( volatile uint32_t * ) 0xe000ed04 ) ) +#define portNVIC_PENDSVSET_BIT ( 1UL << 28UL ) +#define portEND_SWITCHING_ISR( xSwitchRequired ) if( xSwitchRequired ) portNVIC_INT_CTRL_REG = portNVIC_PENDSVSET_BIT +#define portYIELD_FROM_ISR( x ) portEND_SWITCHING_ISR( x ) +/*-----------------------------------------------------------*/ + +/* Critical section management. */ +extern void vPortEnterCritical( void ); +extern void vPortExitCritical( void ); +#define portSET_INTERRUPT_MASK_FROM_ISR() ulPortRaiseBASEPRI() +#define portCLEAR_INTERRUPT_MASK_FROM_ISR(x) vPortSetBASEPRI(x) +#define portDISABLE_INTERRUPTS() vPortRaiseBASEPRI() +#define portENABLE_INTERRUPTS() vPortSetBASEPRI(0) +#define portENTER_CRITICAL() vPortEnterCritical() +#define portEXIT_CRITICAL() vPortExitCritical() + +/*-----------------------------------------------------------*/ + +/* Task function macros as described on the FreeRTOS.org WEB site. These are +not necessary for to use this port. They are defined so the common demo files +(which build with all the ports) will build. */ +#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters ) +#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters ) +/*-----------------------------------------------------------*/ + +/* Architecture specific optimisations. */ +#ifndef configUSE_PORT_OPTIMISED_TASK_SELECTION + #define configUSE_PORT_OPTIMISED_TASK_SELECTION 1 +#endif + +#if configUSE_PORT_OPTIMISED_TASK_SELECTION == 1 + + /* Generic helper function. */ + __attribute__( ( always_inline ) ) static inline uint8_t ucPortCountLeadingZeros( uint32_t ulBitmap ) + { + uint8_t ucReturn; + + __asm volatile ( "clz %0, %1" : "=r" ( ucReturn ) : "r" ( ulBitmap ) ); + return ucReturn; + } + + /* Check the configuration. */ + #if( configMAX_PRIORITIES > 32 ) + #error configUSE_PORT_OPTIMISED_TASK_SELECTION can only be set to 1 when configMAX_PRIORITIES is less than or equal to 32. It is very rare that a system requires more than 10 to 15 difference priorities as tasks that share a priority will time slice. + #endif + + /* Store/clear the ready priorities in a bit map. */ + #define portRECORD_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) |= ( 1UL << ( uxPriority ) ) + #define portRESET_READY_PRIORITY( uxPriority, uxReadyPriorities ) ( uxReadyPriorities ) &= ~( 1UL << ( uxPriority ) ) + + /*-----------------------------------------------------------*/ + + #define portGET_HIGHEST_PRIORITY( uxTopPriority, uxReadyPriorities ) uxTopPriority = ( 31UL - ( uint32_t ) ucPortCountLeadingZeros( ( uxReadyPriorities ) ) ) + +#endif /* configUSE_PORT_OPTIMISED_TASK_SELECTION */ + +/*-----------------------------------------------------------*/ + +#ifdef configASSERT + void vPortValidateInterruptPriority( void ); + #define portASSERT_IF_INTERRUPT_PRIORITY_INVALID() vPortValidateInterruptPriority() +#endif + +/* portNOP() is not required by this port. */ +#define portNOP() + +#define portINLINE __inline + +#ifndef portFORCE_INLINE + #define portFORCE_INLINE inline __attribute__(( always_inline)) +#endif + +/* Set the privilege level to user mode if xRunningPrivileged is false. */ +portFORCE_INLINE static void vPortResetPrivilege( BaseType_t xRunningPrivileged ) +{ + if( xRunningPrivileged != pdTRUE ) + { + __asm volatile ( " mrs r0, control \n" \ + " orr r0, #1 \n" \ + " msr control, r0 \n" \ + :::"r0" ); + } +} +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static BaseType_t xPortIsInsideInterrupt( void ) +{ +uint32_t ulCurrentInterrupt; +BaseType_t xReturn; + + /* Obtain the number of the currently executing interrupt. */ + __asm volatile( "mrs %0, ipsr" : "=r"( ulCurrentInterrupt ) ); + + if( ulCurrentInterrupt == 0 ) + { + xReturn = pdFALSE; + } + else + { + xReturn = pdTRUE; + } + + return xReturn; +} + +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static void vPortRaiseBASEPRI( void ) +{ +uint32_t ulNewBASEPRI; + + __asm volatile + ( + " mov %0, %1 \n" \ + " cpsid i \n" \ + " msr basepri, %0 \n" \ + " isb \n" \ + " dsb \n" \ + " cpsie i \n" \ + :"=r" (ulNewBASEPRI) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) + ); +} + +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static uint32_t ulPortRaiseBASEPRI( void ) +{ +uint32_t ulOriginalBASEPRI, ulNewBASEPRI; + + __asm volatile + ( + " mrs %0, basepri \n" \ + " mov %1, %2 \n" \ + " cpsid i \n" \ + " msr basepri, %1 \n" \ + " isb \n" \ + " dsb \n" \ + " cpsie i \n" \ + :"=r" (ulOriginalBASEPRI), "=r" (ulNewBASEPRI) : "i" ( configMAX_SYSCALL_INTERRUPT_PRIORITY ) + ); + + /* This return will not be reached but is necessary to prevent compiler + warnings. */ + return ulOriginalBASEPRI; +} +/*-----------------------------------------------------------*/ + +portFORCE_INLINE static void vPortSetBASEPRI( uint32_t ulNewMaskValue ) +{ + __asm volatile + ( + " msr basepri, %0 " :: "r" ( ulNewMaskValue ) + ); +} +/*-----------------------------------------------------------*/ + + +#ifdef __cplusplus +} +#endif + +#endif /* PORTMACRO_H */ +