blob: f5692a246b715ee2f3dc8556058bea4452938b89 [file] [log] [blame]
/**
******************************************************************************
* @file stm32f0xx_ll_gpio.c
* @author MCD Application Team
* @brief GPIO LL module driver.
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
#if defined(USE_FULL_LL_DRIVER)
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_ll_gpio.h"
#include "stm32f0xx_ll_bus.h"
#ifdef USE_FULL_ASSERT
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
#endif
/** @addtogroup STM32F0xx_LL_Driver
* @{
*/
#if defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF)
/** @addtogroup GPIO_LL
* @{
*/
/** MISRA C:2012 deviation rule has been granted for following rules:
* Rule-12.2 - Medium: RHS argument is in interval [0,INF] which is out of
* range of the shift operator in following API :
* LL_GPIO_Init
* LL_GPIO_DeInit
* LL_GPIO_SetPinMode
* LL_GPIO_GetPinMode
* LL_GPIO_SetPinSpeed
* LL_GPIO_GetPinSpeed
* LL_GPIO_SetPinPull
* LL_GPIO_GetPinPull
* LL_GPIO_GetAFPin_0_7
* LL_GPIO_SetAFPin_0_7
* LL_GPIO_SetAFPin_8_15
* LL_GPIO_GetAFPin_8_15
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @addtogroup GPIO_LL_Private_Macros
* @{
*/
#define IS_LL_GPIO_PIN(__VALUE__) (((0x00u) < (__VALUE__)) && ((__VALUE__) <= (LL_GPIO_PIN_ALL)))
#define IS_LL_GPIO_MODE(__VALUE__) (((__VALUE__) == LL_GPIO_MODE_INPUT) ||\
((__VALUE__) == LL_GPIO_MODE_OUTPUT) ||\
((__VALUE__) == LL_GPIO_MODE_ALTERNATE) ||\
((__VALUE__) == LL_GPIO_MODE_ANALOG))
#define IS_LL_GPIO_OUTPUT_TYPE(__VALUE__) (((__VALUE__) == LL_GPIO_OUTPUT_PUSHPULL) ||\
((__VALUE__) == LL_GPIO_OUTPUT_OPENDRAIN))
#define IS_LL_GPIO_SPEED(__VALUE__) (((__VALUE__) == LL_GPIO_SPEED_FREQ_LOW) ||\
((__VALUE__) == LL_GPIO_SPEED_FREQ_MEDIUM) ||\
((__VALUE__) == LL_GPIO_SPEED_FREQ_HIGH))
#define IS_LL_GPIO_PULL(__VALUE__) (((__VALUE__) == LL_GPIO_PULL_NO) ||\
((__VALUE__) == LL_GPIO_PULL_UP) ||\
((__VALUE__) == LL_GPIO_PULL_DOWN))
#define IS_LL_GPIO_ALTERNATE(__VALUE__) (((__VALUE__) == LL_GPIO_AF_0 ) ||\
((__VALUE__) == LL_GPIO_AF_1 ) ||\
((__VALUE__) == LL_GPIO_AF_2 ) ||\
((__VALUE__) == LL_GPIO_AF_3 ) ||\
((__VALUE__) == LL_GPIO_AF_4 ) ||\
((__VALUE__) == LL_GPIO_AF_5 ) ||\
((__VALUE__) == LL_GPIO_AF_6 ) ||\
((__VALUE__) == LL_GPIO_AF_7 ))
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup GPIO_LL_Exported_Functions
* @{
*/
/** @addtogroup GPIO_LL_EF_Init
* @{
*/
/**
* @brief De-initialize GPIO registers (Registers restored to their default values).
* @param GPIOx GPIO Port
* @retval An ErrorStatus enumeration value:
* - SUCCESS: GPIO registers are de-initialized
* - ERROR: Wrong GPIO Port
*/
ErrorStatus LL_GPIO_DeInit(GPIO_TypeDef *GPIOx)
{
ErrorStatus status = SUCCESS;
/* Check the parameters */
assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
/* Force and Release reset on clock of GPIOx Port */
if (GPIOx == GPIOA)
{
LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOA);
LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOA);
}
else if (GPIOx == GPIOB)
{
LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOB);
LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOB);
}
else if (GPIOx == GPIOC)
{
LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOC);
LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOC);
}
#if defined(GPIOD)
else if (GPIOx == GPIOD)
{
LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOD);
LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOD);
}
#endif /* GPIOD */
#if defined(GPIOE)
else if (GPIOx == GPIOE)
{
LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOE);
LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOE);
}
#endif /* GPIOE */
#if defined(GPIOF)
else if (GPIOx == GPIOF)
{
LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_GPIOF);
LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_GPIOF);
}
#endif /* GPIOF */
else
{
status = ERROR;
}
return (status);
}
/**
* @brief Initialize GPIO registers according to the specified parameters in GPIO_InitStruct.
* @param GPIOx GPIO Port
* @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure
* that contains the configuration information for the specified GPIO peripheral.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: GPIO registers are initialized according to GPIO_InitStruct content
* - ERROR: Not applicable
*/
ErrorStatus LL_GPIO_Init(GPIO_TypeDef *GPIOx, LL_GPIO_InitTypeDef *GPIO_InitStruct)
{
uint32_t pinpos;
uint32_t currentpin;
/* Check the parameters */
assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
assert_param(IS_LL_GPIO_PIN(GPIO_InitStruct->Pin));
assert_param(IS_LL_GPIO_MODE(GPIO_InitStruct->Mode));
assert_param(IS_LL_GPIO_PULL(GPIO_InitStruct->Pull));
/* ------------------------- Configure the port pins ---------------- */
/* Initialize pinpos on first pin set */
pinpos = 0;
/* Configure the port pins */
while (((GPIO_InitStruct->Pin) >> pinpos) != 0x00u)
{
/* Get current io position */
currentpin = (GPIO_InitStruct->Pin) & (0x00000001uL << pinpos);
if (currentpin != 0x00u)
{
if ((GPIO_InitStruct->Mode == LL_GPIO_MODE_OUTPUT) || (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE))
{
/* Check Speed mode parameters */
assert_param(IS_LL_GPIO_SPEED(GPIO_InitStruct->Speed));
/* Speed mode configuration */
LL_GPIO_SetPinSpeed(GPIOx, currentpin, GPIO_InitStruct->Speed);
/* Check Output mode parameters */
assert_param(IS_LL_GPIO_OUTPUT_TYPE(GPIO_InitStruct->OutputType));
/* Output mode configuration*/
LL_GPIO_SetPinOutputType(GPIOx, GPIO_InitStruct->Pin, GPIO_InitStruct->OutputType);
}
/* Pull-up Pull down resistor configuration*/
LL_GPIO_SetPinPull(GPIOx, currentpin, GPIO_InitStruct->Pull);
if (GPIO_InitStruct->Mode == LL_GPIO_MODE_ALTERNATE)
{
/* Check Alternate parameter */
assert_param(IS_LL_GPIO_ALTERNATE(GPIO_InitStruct->Alternate));
/* Speed mode configuration */
if (currentpin < LL_GPIO_PIN_8)
{
LL_GPIO_SetAFPin_0_7(GPIOx, currentpin, GPIO_InitStruct->Alternate);
}
else
{
LL_GPIO_SetAFPin_8_15(GPIOx, currentpin, GPIO_InitStruct->Alternate);
}
}
/* Pin Mode configuration */
LL_GPIO_SetPinMode(GPIOx, currentpin, GPIO_InitStruct->Mode);
}
pinpos++;
}
return (SUCCESS);
}
/**
* @brief Set each @ref LL_GPIO_InitTypeDef field to default value.
* @param GPIO_InitStruct pointer to a @ref LL_GPIO_InitTypeDef structure
* whose fields will be set to default values.
* @retval None
*/
void LL_GPIO_StructInit(LL_GPIO_InitTypeDef *GPIO_InitStruct)
{
/* Reset GPIO init structure parameters values */
GPIO_InitStruct->Pin = LL_GPIO_PIN_ALL;
GPIO_InitStruct->Mode = LL_GPIO_MODE_ANALOG;
GPIO_InitStruct->Speed = LL_GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct->OutputType = LL_GPIO_OUTPUT_PUSHPULL;
GPIO_InitStruct->Pull = LL_GPIO_PULL_NO;
GPIO_InitStruct->Alternate = LL_GPIO_AF_0;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined (GPIOA) || defined (GPIOB) || defined (GPIOC) || defined (GPIOD) || defined (GPIOE) || defined (GPIOF) */
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */