| /** |
| ****************************************************************************** |
| * @file stm32f1xx_hal_irda.h |
| * @author MCD Application Team |
| * @brief Header file of IRDA HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2016 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef __STM32F1xx_HAL_IRDA_H |
| #define __STM32F1xx_HAL_IRDA_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f1xx_hal_def.h" |
| |
| /** @addtogroup STM32F1xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup IRDA |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup IRDA_Exported_Types IRDA Exported Types |
| * @{ |
| */ |
| /** |
| * @brief IRDA Init Structure definition |
| */ |
| typedef struct |
| { |
| uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate. |
| The baud rate is computed using the following formula: |
| - IntegerDivider = ((PCLKx) / (16 * (hirda->Init.BaudRate))) |
| - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */ |
| |
| uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. |
| This parameter can be a value of @ref IRDA_Word_Length */ |
| |
| uint32_t Parity; /*!< Specifies the parity mode. |
| This parameter can be a value of @ref IRDA_Parity |
| @note When parity is enabled, the computed parity is inserted |
| at the MSB position of the transmitted data (9th bit when |
| the word length is set to 9 data bits; 8th bit when the |
| word length is set to 8 data bits). */ |
| |
| uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. |
| This parameter can be a value of @ref IRDA_Mode */ |
| |
| uint8_t Prescaler; /*!< Specifies the Prescaler value to be programmed |
| in the IrDA low-power Baud Register, for defining pulse width on which |
| burst acceptance/rejection will be decided. This value is used as divisor |
| of system clock to achieve required pulse width. */ |
| |
| uint32_t IrDAMode; /*!< Specifies the IrDA mode |
| This parameter can be a value of @ref IRDA_Low_Power */ |
| } IRDA_InitTypeDef; |
| |
| /** |
| * @brief HAL IRDA State structures definition |
| * @note HAL IRDA State value is a combination of 2 different substates: gState and RxState. |
| * - gState contains IRDA state information related to global Handle management |
| * and also information related to Tx operations. |
| * gState value coding follow below described bitmap : |
| * b7-b6 Error information |
| * 00 : No Error |
| * 01 : (Not Used) |
| * 10 : Timeout |
| * 11 : Error |
| * b5 IP initialisation status |
| * 0 : Reset (IP not initialized) |
| * 1 : Init done (IP initialized. HAL IRDA Init function already called) |
| * b4-b3 (not used) |
| * xx : Should be set to 00 |
| * b2 Intrinsic process state |
| * 0 : Ready |
| * 1 : Busy (IP busy with some configuration or internal operations) |
| * b1 (not used) |
| * x : Should be set to 0 |
| * b0 Tx state |
| * 0 : Ready (no Tx operation ongoing) |
| * 1 : Busy (Tx operation ongoing) |
| * - RxState contains information related to Rx operations. |
| * RxState value coding follow below described bitmap : |
| * b7-b6 (not used) |
| * xx : Should be set to 00 |
| * b5 IP initialisation status |
| * 0 : Reset (IP not initialized) |
| * 1 : Init done (IP initialized) |
| * b4-b2 (not used) |
| * xxx : Should be set to 000 |
| * b1 Rx state |
| * 0 : Ready (no Rx operation ongoing) |
| * 1 : Busy (Rx operation ongoing) |
| * b0 (not used) |
| * x : Should be set to 0. |
| */ |
| typedef enum |
| { |
| HAL_IRDA_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized |
| Value is allowed for gState and RxState */ |
| HAL_IRDA_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use |
| Value is allowed for gState and RxState */ |
| HAL_IRDA_STATE_BUSY = 0x24U, /*!< An internal process is ongoing |
| Value is allowed for gState only */ |
| HAL_IRDA_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing |
| Value is allowed for gState only */ |
| HAL_IRDA_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing |
| Value is allowed for RxState only */ |
| HAL_IRDA_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing |
| Not to be used for neither gState nor RxState. |
| Value is result of combination (Or) between gState and RxState values */ |
| HAL_IRDA_STATE_TIMEOUT = 0xA0U, /*!< Timeout state |
| Value is allowed for gState only */ |
| HAL_IRDA_STATE_ERROR = 0xE0U /*!< Error |
| Value is allowed for gState only */ |
| } HAL_IRDA_StateTypeDef; |
| |
| /** |
| * @brief IRDA handle Structure definition |
| */ |
| #if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) |
| typedef struct __IRDA_HandleTypeDef |
| #else |
| typedef struct |
| #endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ |
| { |
| USART_TypeDef *Instance; /*!< USART registers base address */ |
| |
| IRDA_InitTypeDef Init; /*!< IRDA communication parameters */ |
| |
| uint8_t *pTxBuffPtr; /*!< Pointer to IRDA Tx transfer Buffer */ |
| |
| uint16_t TxXferSize; /*!< IRDA Tx Transfer size */ |
| |
| __IO uint16_t TxXferCount; /*!< IRDA Tx Transfer Counter */ |
| |
| uint8_t *pRxBuffPtr; /*!< Pointer to IRDA Rx transfer Buffer */ |
| |
| uint16_t RxXferSize; /*!< IRDA Rx Transfer size */ |
| |
| __IO uint16_t RxXferCount; /*!< IRDA Rx Transfer Counter */ |
| |
| DMA_HandleTypeDef *hdmatx; /*!< IRDA Tx DMA Handle parameters */ |
| |
| DMA_HandleTypeDef *hdmarx; /*!< IRDA Rx DMA Handle parameters */ |
| |
| HAL_LockTypeDef Lock; /*!< Locking object */ |
| |
| __IO HAL_IRDA_StateTypeDef gState; /*!< IRDA state information related to global Handle management |
| and also related to Tx operations. |
| This parameter can be a value of @ref HAL_IRDA_StateTypeDef */ |
| |
| __IO HAL_IRDA_StateTypeDef RxState; /*!< IRDA state information related to Rx operations. |
| This parameter can be a value of @ref HAL_IRDA_StateTypeDef */ |
| |
| __IO uint32_t ErrorCode; /*!< IRDA Error code */ |
| |
| #if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) |
| void (* TxHalfCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Tx Half Complete Callback */ |
| |
| void (* TxCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Tx Complete Callback */ |
| |
| void (* RxHalfCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Rx Half Complete Callback */ |
| |
| void (* RxCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Rx Complete Callback */ |
| |
| void (* ErrorCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Error Callback */ |
| |
| void (* AbortCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Complete Callback */ |
| |
| void (* AbortTransmitCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Transmit Complete Callback */ |
| |
| void (* AbortReceiveCpltCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Abort Receive Complete Callback */ |
| |
| |
| void (* MspInitCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Msp Init callback */ |
| |
| void (* MspDeInitCallback)(struct __IRDA_HandleTypeDef *hirda); /*!< IRDA Msp DeInit callback */ |
| #endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ |
| |
| } IRDA_HandleTypeDef; |
| |
| #if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) |
| /** |
| * @brief HAL IRDA Callback ID enumeration definition |
| */ |
| typedef enum |
| { |
| HAL_IRDA_TX_HALFCOMPLETE_CB_ID = 0x00U, /*!< IRDA Tx Half Complete Callback ID */ |
| HAL_IRDA_TX_COMPLETE_CB_ID = 0x01U, /*!< IRDA Tx Complete Callback ID */ |
| HAL_IRDA_RX_HALFCOMPLETE_CB_ID = 0x02U, /*!< IRDA Rx Half Complete Callback ID */ |
| HAL_IRDA_RX_COMPLETE_CB_ID = 0x03U, /*!< IRDA Rx Complete Callback ID */ |
| HAL_IRDA_ERROR_CB_ID = 0x04U, /*!< IRDA Error Callback ID */ |
| HAL_IRDA_ABORT_COMPLETE_CB_ID = 0x05U, /*!< IRDA Abort Complete Callback ID */ |
| HAL_IRDA_ABORT_TRANSMIT_COMPLETE_CB_ID = 0x06U, /*!< IRDA Abort Transmit Complete Callback ID */ |
| HAL_IRDA_ABORT_RECEIVE_COMPLETE_CB_ID = 0x07U, /*!< IRDA Abort Receive Complete Callback ID */ |
| |
| HAL_IRDA_MSPINIT_CB_ID = 0x08U, /*!< IRDA MspInit callback ID */ |
| HAL_IRDA_MSPDEINIT_CB_ID = 0x09U /*!< IRDA MspDeInit callback ID */ |
| |
| } HAL_IRDA_CallbackIDTypeDef; |
| |
| /** |
| * @brief HAL IRDA Callback pointer definition |
| */ |
| typedef void (*pIRDA_CallbackTypeDef)(IRDA_HandleTypeDef *hirda); /*!< pointer to an IRDA callback function */ |
| |
| #endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup IRDA_Exported_Constants IRDA Exported constants |
| * @{ |
| */ |
| /** @defgroup IRDA_Error_Code IRDA Error Code |
| * @{ |
| */ |
| #define HAL_IRDA_ERROR_NONE 0x00000000U /*!< No error */ |
| #define HAL_IRDA_ERROR_PE 0x00000001U /*!< Parity error */ |
| #define HAL_IRDA_ERROR_NE 0x00000002U /*!< Noise error */ |
| #define HAL_IRDA_ERROR_FE 0x00000004U /*!< Frame error */ |
| #define HAL_IRDA_ERROR_ORE 0x00000008U /*!< Overrun error */ |
| #define HAL_IRDA_ERROR_DMA 0x00000010U /*!< DMA transfer error */ |
| #if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) |
| #define HAL_IRDA_ERROR_INVALID_CALLBACK ((uint32_t)0x00000020U) /*!< Invalid Callback error */ |
| #endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup IRDA_Word_Length IRDA Word Length |
| * @{ |
| */ |
| #define IRDA_WORDLENGTH_8B 0x00000000U |
| #define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup IRDA_Parity IRDA Parity |
| * @{ |
| */ |
| #define IRDA_PARITY_NONE 0x00000000U |
| #define IRDA_PARITY_EVEN ((uint32_t)USART_CR1_PCE) |
| #define IRDA_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup IRDA_Mode IRDA Transfer Mode |
| * @{ |
| */ |
| #define IRDA_MODE_RX ((uint32_t)USART_CR1_RE) |
| #define IRDA_MODE_TX ((uint32_t)USART_CR1_TE) |
| #define IRDA_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup IRDA_Low_Power IRDA Low Power |
| * @{ |
| */ |
| #define IRDA_POWERMODE_LOWPOWER ((uint32_t)USART_CR3_IRLP) |
| #define IRDA_POWERMODE_NORMAL 0x00000000U |
| /** |
| * @} |
| */ |
| |
| /** @defgroup IRDA_Flags IRDA Flags |
| * Elements values convention: 0xXXXX |
| * - 0xXXXX : Flag mask in the SR register |
| * @{ |
| */ |
| #define IRDA_FLAG_TXE ((uint32_t)USART_SR_TXE) |
| #define IRDA_FLAG_TC ((uint32_t)USART_SR_TC) |
| #define IRDA_FLAG_RXNE ((uint32_t)USART_SR_RXNE) |
| #define IRDA_FLAG_IDLE ((uint32_t)USART_SR_IDLE) |
| #define IRDA_FLAG_ORE ((uint32_t)USART_SR_ORE) |
| #define IRDA_FLAG_NE ((uint32_t)USART_SR_NE) |
| #define IRDA_FLAG_FE ((uint32_t)USART_SR_FE) |
| #define IRDA_FLAG_PE ((uint32_t)USART_SR_PE) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup IRDA_Interrupt_definition IRDA Interrupt Definitions |
| * Elements values convention: 0xY000XXXX |
| * - XXXX : Interrupt mask in the XX register |
| * - Y : Interrupt source register (2bits) |
| * - 01: CR1 register |
| * - 10: CR2 register |
| * - 11: CR3 register |
| * @{ |
| */ |
| #define IRDA_IT_PE ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_PEIE)) |
| #define IRDA_IT_TXE ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_TXEIE)) |
| #define IRDA_IT_TC ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_TCIE)) |
| #define IRDA_IT_RXNE ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_RXNEIE)) |
| #define IRDA_IT_IDLE ((uint32_t)(IRDA_CR1_REG_INDEX << 28U | USART_CR1_IDLEIE)) |
| |
| #define IRDA_IT_LBD ((uint32_t)(IRDA_CR2_REG_INDEX << 28U | USART_CR2_LBDIE)) |
| |
| #define IRDA_IT_CTS ((uint32_t)(IRDA_CR3_REG_INDEX << 28U | USART_CR3_CTSIE)) |
| #define IRDA_IT_ERR ((uint32_t)(IRDA_CR3_REG_INDEX << 28U | USART_CR3_EIE)) |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| /** @defgroup IRDA_Exported_Macros IRDA Exported Macros |
| * @{ |
| */ |
| |
| /** @brief Reset IRDA handle gstate & RxState |
| * @param __HANDLE__ specifies the IRDA Handle. |
| * IRDA Handle selects the USARTx or UARTy peripheral |
| * (USART,UART availability and x,y values depending on device). |
| * @retval None |
| */ |
| #if USE_HAL_IRDA_REGISTER_CALLBACKS == 1 |
| #define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) do{ \ |
| (__HANDLE__)->gState = HAL_IRDA_STATE_RESET; \ |
| (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET; \ |
| (__HANDLE__)->MspInitCallback = NULL; \ |
| (__HANDLE__)->MspDeInitCallback = NULL; \ |
| } while(0U) |
| #else |
| #define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) do{ \ |
| (__HANDLE__)->gState = HAL_IRDA_STATE_RESET; \ |
| (__HANDLE__)->RxState = HAL_IRDA_STATE_RESET; \ |
| } while(0U) |
| #endif /*USE_HAL_IRDA_REGISTER_CALLBACKS */ |
| |
| /** @brief Flush the IRDA DR register |
| * @param __HANDLE__ specifies the IRDA Handle. |
| * IRDA Handle selects the USARTx or UARTy peripheral |
| * (USART,UART availability and x,y values depending on device). |
| * @retval None |
| */ |
| #define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) |
| |
| /** @brief Check whether the specified IRDA flag is set or not. |
| * @param __HANDLE__ specifies the IRDA Handle. |
| * IRDA Handle selects the USARTx or UARTy peripheral |
| * (USART,UART availability and x,y values depending on device). |
| * @param __FLAG__ specifies the flag to check. |
| * This parameter can be one of the following values: |
| * @arg IRDA_FLAG_TXE: Transmit data register empty flag |
| * @arg IRDA_FLAG_TC: Transmission Complete flag |
| * @arg IRDA_FLAG_RXNE: Receive data register not empty flag |
| * @arg IRDA_FLAG_IDLE: Idle Line detection flag |
| * @arg IRDA_FLAG_ORE: OverRun Error flag |
| * @arg IRDA_FLAG_NE: Noise Error flag |
| * @arg IRDA_FLAG_FE: Framing Error flag |
| * @arg IRDA_FLAG_PE: Parity Error flag |
| * @retval The new state of __FLAG__ (TRUE or FALSE). |
| */ |
| #define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) |
| |
| /** @brief Clear the specified IRDA pending flag. |
| * @param __HANDLE__ specifies the IRDA Handle. |
| * IRDA Handle selects the USARTx or UARTy peripheral |
| * (USART,UART availability and x,y values depending on device). |
| * @param __FLAG__ specifies the flag to check. |
| * This parameter can be any combination of the following values: |
| * @arg IRDA_FLAG_TC: Transmission Complete flag. |
| * @arg IRDA_FLAG_RXNE: Receive data register not empty flag. |
| * |
| * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun |
| * error) and IDLE (Idle line detected) flags are cleared by software |
| * sequence: a read operation to USART_SR register followed by a read |
| * operation to USART_DR register. |
| * @note RXNE flag can be also cleared by a read to the USART_DR register. |
| * @note TC flag can be also cleared by software sequence: a read operation to |
| * USART_SR register followed by a write operation to USART_DR register. |
| * @note TXE flag is cleared only by a write to the USART_DR register. |
| * @retval None |
| */ |
| #define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) |
| |
| /** @brief Clear the IRDA PE pending flag. |
| * @param __HANDLE__ specifies the IRDA Handle. |
| * IRDA Handle selects the USARTx or UARTy peripheral |
| * (USART,UART availability and x,y values depending on device). |
| * @retval None |
| */ |
| #define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) \ |
| do{ \ |
| __IO uint32_t tmpreg = 0x00U; \ |
| tmpreg = (__HANDLE__)->Instance->SR; \ |
| tmpreg = (__HANDLE__)->Instance->DR; \ |
| UNUSED(tmpreg); \ |
| } while(0U) |
| |
| /** @brief Clear the IRDA FE pending flag. |
| * @param __HANDLE__ specifies the IRDA Handle. |
| * IRDA Handle selects the USARTx or UARTy peripheral |
| * (USART,UART availability and x,y values depending on device). |
| * @retval None |
| */ |
| #define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) |
| |
| /** @brief Clear the IRDA NE pending flag. |
| * @param __HANDLE__ specifies the IRDA Handle. |
| * IRDA Handle selects the USARTx or UARTy peripheral |
| * (USART,UART availability and x,y values depending on device). |
| * @retval None |
| */ |
| #define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) |
| |
| /** @brief Clear the IRDA ORE pending flag. |
| * @param __HANDLE__ specifies the IRDA Handle. |
| * IRDA Handle selects the USARTx or UARTy peripheral |
| * (USART,UART availability and x,y values depending on device). |
| * @retval None |
| */ |
| #define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) |
| |
| /** @brief Clear the IRDA IDLE pending flag. |
| * @param __HANDLE__ specifies the IRDA Handle. |
| * IRDA Handle selects the USARTx or UARTy peripheral |
| * (USART,UART availability and x,y values depending on device). |
| * @retval None |
| */ |
| #define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) |
| |
| /** @brief Enable the specified IRDA interrupt. |
| * @param __HANDLE__ specifies the IRDA Handle. |
| * IRDA Handle selects the USARTx or UARTy peripheral |
| * (USART,UART availability and x,y values depending on device). |
| * @param __INTERRUPT__ specifies the IRDA interrupt source to enable. |
| * This parameter can be one of the following values: |
| * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt |
| * @arg IRDA_IT_TC: Transmission complete interrupt |
| * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt |
| * @arg IRDA_IT_IDLE: Idle line detection interrupt |
| * @arg IRDA_IT_PE: Parity Error interrupt |
| * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error) |
| * @retval None |
| */ |
| #define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == IRDA_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \ |
| (((__INTERRUPT__) >> 28U) == IRDA_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \ |
| ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & IRDA_IT_MASK))) |
| /** @brief Disable the specified IRDA interrupt. |
| * @param __HANDLE__ specifies the IRDA Handle. |
| * IRDA Handle selects the USARTx or UARTy peripheral |
| * (USART,UART availability and x,y values depending on device). |
| * @param __INTERRUPT__ specifies the IRDA interrupt source to disable. |
| * This parameter can be one of the following values: |
| * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt |
| * @arg IRDA_IT_TC: Transmission complete interrupt |
| * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt |
| * @arg IRDA_IT_IDLE: Idle line detection interrupt |
| * @arg IRDA_IT_PE: Parity Error interrupt |
| * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error) |
| * @retval None |
| */ |
| #define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28U) == IRDA_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \ |
| (((__INTERRUPT__) >> 28U) == IRDA_CR2_REG_INDEX)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \ |
| ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & IRDA_IT_MASK))) |
| |
| /** @brief Check whether the specified IRDA interrupt has occurred or not. |
| * @param __HANDLE__ specifies the IRDA Handle. |
| * IRDA Handle selects the USARTx or UARTy peripheral |
| * (USART,UART availability and x,y values depending on device). |
| * @param __IT__ specifies the IRDA interrupt source to check. |
| * This parameter can be one of the following values: |
| * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt |
| * @arg IRDA_IT_TC: Transmission complete interrupt |
| * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt |
| * @arg IRDA_IT_IDLE: Idle line detection interrupt |
| * @arg IRDA_IT_ERR: Error interrupt |
| * @arg IRDA_IT_PE: Parity Error interrupt |
| * @retval The new state of __IT__ (TRUE or FALSE). |
| */ |
| #define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28U) == IRDA_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28U) == IRDA_CR2_REG_INDEX)? \ |
| (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & IRDA_IT_MASK)) |
| |
| /** @brief Enable UART/USART associated to IRDA Handle |
| * @param __HANDLE__ specifies the IRDA Handle. |
| * IRDA Handle selects the USARTx or UARTy peripheral |
| * (USART,UART availability and x,y values depending on device). |
| * @retval None |
| */ |
| #define __HAL_IRDA_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, USART_CR1_UE)) |
| |
| /** @brief Disable UART/USART associated to IRDA Handle |
| * @param __HANDLE__ specifies the IRDA Handle. |
| * IRDA Handle selects the USARTx or UARTy peripheral |
| * (USART,UART availability and x,y values depending on device). |
| * @retval None |
| */ |
| #define __HAL_IRDA_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, USART_CR1_UE)) |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup IRDA_Exported_Functions |
| * @{ |
| */ |
| |
| /** @addtogroup IRDA_Exported_Functions_Group1 |
| * @{ |
| */ |
| /* Initialization/de-initialization functions **********************************/ |
| HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda); |
| HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda); |
| void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda); |
| void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda); |
| |
| #if (USE_HAL_IRDA_REGISTER_CALLBACKS == 1) |
| /* Callbacks Register/UnRegister functions ***********************************/ |
| HAL_StatusTypeDef HAL_IRDA_RegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID, pIRDA_CallbackTypeDef pCallback); |
| HAL_StatusTypeDef HAL_IRDA_UnRegisterCallback(IRDA_HandleTypeDef *hirda, HAL_IRDA_CallbackIDTypeDef CallbackID); |
| #endif /* USE_HAL_IRDA_REGISTER_CALLBACKS */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup IRDA_Exported_Functions_Group2 |
| * @{ |
| */ |
| /* IO operation functions *******************************************************/ |
| HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); |
| HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); |
| HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); |
| HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); |
| HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); |
| HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); |
| HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda); |
| HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda); |
| HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda); |
| /* Transfer Abort functions */ |
| HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda); |
| HAL_StatusTypeDef HAL_IRDA_AbortTransmit(IRDA_HandleTypeDef *hirda); |
| HAL_StatusTypeDef HAL_IRDA_AbortReceive(IRDA_HandleTypeDef *hirda); |
| HAL_StatusTypeDef HAL_IRDA_Abort_IT(IRDA_HandleTypeDef *hirda); |
| HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT(IRDA_HandleTypeDef *hirda); |
| HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT(IRDA_HandleTypeDef *hirda); |
| |
| void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda); |
| void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda); |
| void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda); |
| void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda); |
| void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda); |
| void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda); |
| void HAL_IRDA_AbortCpltCallback(IRDA_HandleTypeDef *hirda); |
| void HAL_IRDA_AbortTransmitCpltCallback(IRDA_HandleTypeDef *hirda); |
| void HAL_IRDA_AbortReceiveCpltCallback(IRDA_HandleTypeDef *hirda); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup IRDA_Exported_Functions_Group3 |
| * @{ |
| */ |
| /* Peripheral State functions **************************************************/ |
| HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda); |
| uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda); |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup IRDA_Private_Constants IRDA Private Constants |
| * @{ |
| */ |
| |
| /** @brief IRDA interruptions flag mask |
| * |
| */ |
| #define IRDA_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \ |
| USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE ) |
| |
| #define IRDA_CR1_REG_INDEX 1U |
| #define IRDA_CR2_REG_INDEX 2U |
| #define IRDA_CR3_REG_INDEX 3U |
| /** |
| * @} |
| */ |
| |
| /* Private macros --------------------------------------------------------*/ |
| /** @defgroup IRDA_Private_Macros IRDA Private Macros |
| * @{ |
| */ |
| #define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_8B) || \ |
| ((LENGTH) == IRDA_WORDLENGTH_9B)) |
| |
| #define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \ |
| ((PARITY) == IRDA_PARITY_EVEN) || \ |
| ((PARITY) == IRDA_PARITY_ODD)) |
| |
| #define IS_IRDA_MODE(MODE) ((((MODE) & 0x0000FFF3U) == 0x00U) && ((MODE) != 0x00000000U)) |
| |
| #define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \ |
| ((MODE) == IRDA_POWERMODE_NORMAL)) |
| |
| #define IS_IRDA_BAUDRATE(BAUDRATE) ((BAUDRATE) < 115201U) |
| |
| #define IRDA_DIV(_PCLK_, _BAUD_) (((_PCLK_)*25U)/(4U*(_BAUD_))) |
| |
| #define IRDA_DIVMANT(_PCLK_, _BAUD_) (IRDA_DIV((_PCLK_), (_BAUD_))/100U) |
| |
| #define IRDA_DIVFRAQ(_PCLK_, _BAUD_) ((((IRDA_DIV((_PCLK_), (_BAUD_)) - (IRDA_DIVMANT((_PCLK_), (_BAUD_)) * 100U)) * 16U) + 50U) / 100U) |
| |
| /* UART BRR = mantissa + overflow + fraction |
| = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0FU) */ |
| #define IRDA_BRR(_PCLK_, _BAUD_) (((IRDA_DIVMANT((_PCLK_), (_BAUD_)) << 4U) + \ |
| (IRDA_DIVFRAQ((_PCLK_), (_BAUD_)) & 0xF0U)) + \ |
| (IRDA_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0FU)) |
| |
| /** |
| * @} |
| */ |
| |
| /* Private functions ---------------------------------------------------------*/ |
| /** @defgroup IRDA_Private_Functions IRDA Private Functions |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* __STM32F1xx_HAL_IRDA_H */ |
