| /** |
| ****************************************************************************** |
| * @file stm32f1xx_hal_cec.h |
| * @author MCD Application Team |
| * @brief Header file of CEC HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2016 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef __STM32F1xx_HAL_CEC_H |
| #define __STM32F1xx_HAL_CEC_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f1xx_hal_def.h" |
| |
| #if defined (CEC) |
| |
| /** @addtogroup STM32F1xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup CEC |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup CEC_Exported_Types CEC Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief CEC Init Structure definition |
| */ |
| typedef struct |
| { |
| uint32_t TimingErrorFree; /*!< Configures the CEC Bit Timing Error Mode. |
| This parameter can be a value of CEC_BitTimingErrorMode */ |
| |
| uint32_t PeriodErrorFree; /*!< Configures the CEC Bit Period Error Mode. |
| This parameter can be a value of CEC_BitPeriodErrorMode */ |
| |
| uint16_t OwnAddress; /*!< Own addresses configuration |
| This parameter can be a value of @ref CEC_OWN_ADDRESS */ |
| |
| uint8_t *RxBuffer; /*!< CEC Rx buffer pointer */ |
| } CEC_InitTypeDef; |
| |
| /** |
| * @brief HAL CEC State definition |
| * @note HAL CEC State value is a combination of 2 different substates: gState and RxState |
| (see @ref CEC_State_Definition). |
| * - gState contains CEC state information related to global Handle management |
| * and also information related to Tx operations. |
| * gState value coding follow below described bitmap : |
| * b7 (not used) |
| * x : Should be set to 0 |
| * b6 Error information |
| * 0 : No Error |
| * 1 : Error |
| * b5 CEC peripheral initialization status |
| * 0 : Reset (peripheral not initialized) |
| * 1 : Init done (peripheral initialized. HAL CEC Init function already called) |
| * b4-b3 (not used) |
| * xx : Should be set to 00 |
| * b2 Intrinsic process state |
| * 0 : Ready |
| * 1 : Busy (peripheral busy with some configuration or internal operations) |
| * b1 (not used) |
| * x : Should be set to 0 |
| * b0 Tx state |
| * 0 : Ready (no Tx operation ongoing) |
| * 1 : Busy (Tx operation ongoing) |
| * - RxState contains information related to Rx operations. |
| * RxState value coding follow below described bitmap : |
| * b7-b6 (not used) |
| * xx : Should be set to 00 |
| * b5 CEC peripheral initialization status |
| * 0 : Reset (peripheral not initialized) |
| * 1 : Init done (peripheral initialized) |
| * b4-b2 (not used) |
| * xxx : Should be set to 000 |
| * b1 Rx state |
| * 0 : Ready (no Rx operation ongoing) |
| * 1 : Busy (Rx operation ongoing) |
| * b0 (not used) |
| * x : Should be set to 0. |
| */ |
| typedef enum |
| { |
| HAL_CEC_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized |
| Value is allowed for gState and RxState */ |
| HAL_CEC_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use |
| Value is allowed for gState and RxState */ |
| HAL_CEC_STATE_BUSY = 0x24U, /*!< an internal process is ongoing |
| Value is allowed for gState only */ |
| HAL_CEC_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing |
| Value is allowed for RxState only */ |
| HAL_CEC_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing |
| Value is allowed for gState only */ |
| HAL_CEC_STATE_BUSY_RX_TX = 0x23U, /*!< an internal process is ongoing |
| Value is allowed for gState only */ |
| HAL_CEC_STATE_ERROR = 0x60U /*!< Error Value is allowed for gState only */ |
| } HAL_CEC_StateTypeDef; |
| |
| /** |
| * @brief CEC handle Structure definition |
| */ |
| typedef struct __CEC_HandleTypeDef |
| { |
| CEC_TypeDef *Instance; /*!< CEC registers base address */ |
| |
| CEC_InitTypeDef Init; /*!< CEC communication parameters */ |
| |
| const uint8_t *pTxBuffPtr; /*!< Pointer to CEC Tx transfer Buffer */ |
| |
| uint16_t TxXferCount; /*!< CEC Tx Transfer Counter */ |
| |
| uint16_t RxXferSize; /*!< CEC Rx Transfer size, 0: header received only */ |
| |
| HAL_LockTypeDef Lock; /*!< Locking object */ |
| |
| HAL_CEC_StateTypeDef gState; /*!< CEC state information related to global Handle management |
| and also related to Tx operations. |
| This parameter can be a value of @ref HAL_CEC_StateTypeDef */ |
| |
| HAL_CEC_StateTypeDef RxState; /*!< CEC state information related to Rx operations. |
| This parameter can be a value of @ref HAL_CEC_StateTypeDef */ |
| |
| uint32_t ErrorCode; /*!< For errors handling purposes, copy of ISR register |
| in case error is reported */ |
| |
| #if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) |
| void (* TxCpltCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC Tx Transfer completed callback */ |
| void (* RxCpltCallback)(struct __CEC_HandleTypeDef *hcec, |
| uint32_t RxFrameSize); /*!< CEC Rx Transfer completed callback */ |
| void (* ErrorCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC error callback */ |
| |
| void (* MspInitCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC Msp Init callback */ |
| void (* MspDeInitCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC Msp DeInit callback */ |
| |
| #endif /* (USE_HAL_CEC_REGISTER_CALLBACKS) */ |
| } CEC_HandleTypeDef; |
| |
| #if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) |
| /** |
| * @brief HAL CEC Callback ID enumeration definition |
| */ |
| typedef enum |
| { |
| HAL_CEC_TX_CPLT_CB_ID = 0x00U, /*!< CEC Tx Transfer completed callback ID */ |
| HAL_CEC_RX_CPLT_CB_ID = 0x01U, /*!< CEC Rx Transfer completed callback ID */ |
| HAL_CEC_ERROR_CB_ID = 0x02U, /*!< CEC error callback ID */ |
| HAL_CEC_MSPINIT_CB_ID = 0x03U, /*!< CEC Msp Init callback ID */ |
| HAL_CEC_MSPDEINIT_CB_ID = 0x04U /*!< CEC Msp DeInit callback ID */ |
| } HAL_CEC_CallbackIDTypeDef; |
| |
| /** |
| * @brief HAL CEC Callback pointer definition |
| */ |
| typedef void (*pCEC_CallbackTypeDef)(CEC_HandleTypeDef *hcec); /*!< pointer to an CEC callback function */ |
| typedef void (*pCEC_RxCallbackTypeDef)(CEC_HandleTypeDef *hcec, |
| uint32_t RxFrameSize); /*!< pointer to an Rx Transfer completed |
| callback function */ |
| #endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ |
| /** |
| * @} |
| */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup CEC_Exported_Constants CEC Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup CEC_Error_Code CEC Error Code |
| * @{ |
| */ |
| #define HAL_CEC_ERROR_NONE 0x00000000U /*!< no error */ |
| #define HAL_CEC_ERROR_BTE CEC_ESR_BTE /*!< Bit Timing Error */ |
| #define HAL_CEC_ERROR_BPE CEC_ESR_BPE /*!< Bit Period Error */ |
| #define HAL_CEC_ERROR_RBTFE CEC_ESR_RBTFE /*!< Rx Block Transfer Finished Error */ |
| #define HAL_CEC_ERROR_SBE CEC_ESR_SBE /*!< Start Bit Error */ |
| #define HAL_CEC_ERROR_ACKE CEC_ESR_ACKE /*!< Block Acknowledge Error */ |
| #define HAL_CEC_ERROR_LINE CEC_ESR_LINE /*!< Line Error */ |
| #define HAL_CEC_ERROR_TBTFE CEC_ESR_TBTFE /*!< Tx Block Transfer Finished Error */ |
| #if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) |
| #define HAL_CEC_ERROR_INVALID_CALLBACK ((uint32_t)0x00000080U) /*!< Invalid Callback Error */ |
| #endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_BitTimingErrorMode Bit Timing Error Mode |
| * @{ |
| */ |
| #define CEC_BIT_TIMING_ERROR_MODE_STANDARD 0x00000000U /*!< Bit timing error Standard Mode */ |
| #define CEC_BIT_TIMING_ERROR_MODE_ERRORFREE CEC_CFGR_BTEM /*!< Bit timing error Free Mode */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_BitPeriodErrorMode Bit Period Error Mode |
| * @{ |
| */ |
| #define CEC_BIT_PERIOD_ERROR_MODE_STANDARD 0x00000000U /*!< Bit period error Standard Mode */ |
| #define CEC_BIT_PERIOD_ERROR_MODE_FLEXIBLE CEC_CFGR_BPEM /*!< Bit period error Flexible Mode */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_Initiator_Position CEC Initiator logical address position in message header |
| * @{ |
| */ |
| #define CEC_INITIATOR_LSB_POS 4U |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_OWN_ADDRESS CEC Own Address |
| * @{ |
| */ |
| #define CEC_OWN_ADDRESS_NONE CEC_OWN_ADDRESS_0 /* Reset value */ |
| #define CEC_OWN_ADDRESS_0 ((uint16_t)0x0000U) /* Logical Address 0 */ |
| #define CEC_OWN_ADDRESS_1 ((uint16_t)0x0001U) /* Logical Address 1 */ |
| #define CEC_OWN_ADDRESS_2 ((uint16_t)0x0002U) /* Logical Address 2 */ |
| #define CEC_OWN_ADDRESS_3 ((uint16_t)0x0003U) /* Logical Address 3 */ |
| #define CEC_OWN_ADDRESS_4 ((uint16_t)0x0004U) /* Logical Address 4 */ |
| #define CEC_OWN_ADDRESS_5 ((uint16_t)0x0005U) /* Logical Address 5 */ |
| #define CEC_OWN_ADDRESS_6 ((uint16_t)0x0006U) /* Logical Address 6 */ |
| #define CEC_OWN_ADDRESS_7 ((uint16_t)0x0007U) /* Logical Address 7 */ |
| #define CEC_OWN_ADDRESS_8 ((uint16_t)0x0008U) /* Logical Address 8 */ |
| #define CEC_OWN_ADDRESS_9 ((uint16_t)0x0009U) /* Logical Address 9 */ |
| #define CEC_OWN_ADDRESS_10 ((uint16_t)0x000AU) /* Logical Address 10 */ |
| #define CEC_OWN_ADDRESS_11 ((uint16_t)0x000BU) /* Logical Address 11 */ |
| #define CEC_OWN_ADDRESS_12 ((uint16_t)0x000CU) /* Logical Address 12 */ |
| #define CEC_OWN_ADDRESS_13 ((uint16_t)0x000DU) /* Logical Address 13 */ |
| #define CEC_OWN_ADDRESS_14 ((uint16_t)0x000EU) /* Logical Address 14 */ |
| #define CEC_OWN_ADDRESS_15 ((uint16_t)0x000FU) /* Logical Address 15 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_Interrupts_Definitions Interrupts definition |
| * @{ |
| */ |
| #define CEC_IT_IE CEC_CFGR_IE |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_Flags_Definitions Flags definition |
| * @{ |
| */ |
| #define CEC_FLAG_TSOM CEC_CSR_TSOM |
| #define CEC_FLAG_TEOM CEC_CSR_TEOM |
| #define CEC_FLAG_TERR CEC_CSR_TERR |
| #define CEC_FLAG_TBTRF CEC_CSR_TBTRF |
| #define CEC_FLAG_RSOM CEC_CSR_RSOM |
| #define CEC_FLAG_REOM CEC_CSR_REOM |
| #define CEC_FLAG_RERR CEC_CSR_RERR |
| #define CEC_FLAG_RBTF CEC_CSR_RBTF |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| /** @defgroup CEC_Exported_Macros CEC Exported Macros |
| * @{ |
| */ |
| |
| /** @brief Reset CEC handle gstate & RxState |
| * @param __HANDLE__ CEC handle. |
| * @retval None |
| */ |
| #if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) |
| #define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \ |
| (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \ |
| (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \ |
| (__HANDLE__)->MspInitCallback = NULL; \ |
| (__HANDLE__)->MspDeInitCallback = NULL; \ |
| } while(0) |
| #else |
| #define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \ |
| (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \ |
| (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \ |
| } while(0) |
| #endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ |
| |
| /** @brief Checks whether or not the specified CEC interrupt flag is set. |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @param __FLAG__ specifies the flag to check. |
| * @arg CEC_FLAG_TERR: Tx Error |
| * @arg CEC_FLAG_TBTRF:Tx Block Transfer Finished |
| * @arg CEC_FLAG_RERR: Rx Error |
| * @arg CEC_FLAG_RBTF: Rx Block Transfer Finished |
| * @retval ITStatus |
| */ |
| #define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__) READ_BIT((__HANDLE__)->Instance->CSR,(__FLAG__)) |
| |
| /** @brief Clears the CEC's pending flags. |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @param __FLAG__ specifies the flag to clear. |
| * This parameter can be any combination of the following values: |
| * @arg CEC_CSR_TERR: Tx Error |
| * @arg CEC_FLAG_TBTRF: Tx Block Transfer Finished |
| * @arg CEC_CSR_RERR: Rx Error |
| * @arg CEC_CSR_RBTF: Rx Block Transfer Finished |
| * @retval none |
| */ |
| #define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) \ |
| do { \ |
| uint32_t tmp = 0x0U; \ |
| tmp = (__HANDLE__)->Instance->CSR & 0x00000002U; \ |
| (__HANDLE__)->Instance->CSR &= (uint32_t)(((~(uint32_t)(__FLAG__)) & 0xFFFFFFFCU) | tmp);\ |
| } while(0U) |
| |
| /** @brief Enables the specified CEC interrupt. |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @param __INTERRUPT__ specifies the CEC interrupt to enable. |
| * This parameter can be one of the following values: |
| * @arg CEC_IT_IE : Interrupt Enable. |
| * @retval none |
| */ |
| #define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CFGR, (__INTERRUPT__)) |
| |
| /** @brief Disables the specified CEC interrupt. |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @param __INTERRUPT__ specifies the CEC interrupt to disable. |
| * This parameter can be one of the following values: |
| * @arg CEC_IT_IE : Interrupt Enable |
| * @retval none |
| */ |
| #define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, (__INTERRUPT__)) |
| |
| /** @brief Checks whether or not the specified CEC interrupt is enabled. |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @param __INTERRUPT__ specifies the CEC interrupt to check. |
| * This parameter can be one of the following values: |
| * @arg CEC_IT_IE : Interrupt Enable |
| * @retval FlagStatus |
| */ |
| #define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) READ_BIT((__HANDLE__)->Instance->CFGR, (__INTERRUPT__)) |
| |
| /** @brief Enables the CEC device |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @retval none |
| */ |
| #define __HAL_CEC_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_PE) |
| |
| /** @brief Disables the CEC device |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @retval none |
| */ |
| #define __HAL_CEC_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_PE) |
| |
| /** @brief Set Transmission Start flag |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @retval none |
| */ |
| #define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TSOM) |
| |
| /** @brief Set Transmission End flag |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @retval none |
| */ |
| #define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TEOM) |
| |
| /** @brief Get Transmission Start flag |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @retval FlagStatus |
| */ |
| #define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) READ_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TSOM) |
| |
| /** @brief Get Transmission End flag |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @retval FlagStatus |
| */ |
| #define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) READ_BIT((__HANDLE__)->Instance->CSR, CEC_CSR_TEOM) |
| |
| /** @brief Clear OAR register |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @retval none |
| */ |
| #define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->OAR, CEC_OAR_OA) |
| |
| /** @brief Set OAR register |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @param __ADDRESS__ Own Address value. |
| * @retval none |
| */ |
| #define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) MODIFY_REG((__HANDLE__)->Instance->OAR, CEC_OAR_OA, (__ADDRESS__)); |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup CEC_Exported_Functions CEC Exported Functions |
| * @{ |
| */ |
| |
| /** @addtogroup CEC_Exported_Functions_Group1 Initialization and de-initialization functions |
| * @brief Initialization and Configuration functions |
| * @{ |
| */ |
| /* Initialization and de-initialization functions ****************************/ |
| HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec); |
| HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec); |
| HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress); |
| void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec); |
| void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec); |
| |
| #if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) |
| HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID, |
| pCEC_CallbackTypeDef pCallback); |
| HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID); |
| |
| HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_RxCallbackTypeDef pCallback); |
| HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec); |
| #endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup CEC_Exported_Functions_Group2 Input and Output operation functions |
| * @brief CEC Transmit/Receive functions |
| * @{ |
| */ |
| /* I/O operation functions ***************************************************/ |
| HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress, uint8_t DestinationAddress, |
| const uint8_t *pData, uint32_t Size); |
| uint32_t HAL_CEC_GetLastReceivedFrameSize(const CEC_HandleTypeDef *hcec); |
| void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t *Rxbuffer); |
| void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec); |
| void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec); |
| void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize); |
| void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec); |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_Exported_Functions_Group3 Peripheral Control functions |
| * @brief CEC control functions |
| * @{ |
| */ |
| /* Peripheral State functions ************************************************/ |
| HAL_CEC_StateTypeDef HAL_CEC_GetState(const CEC_HandleTypeDef *hcec); |
| uint32_t HAL_CEC_GetError(const CEC_HandleTypeDef *hcec); |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /** @defgroup CEC_Private_Types CEC Private Types |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private variables ---------------------------------------------------------*/ |
| /** @defgroup CEC_Private_Variables CEC Private Variables |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup CEC_Private_Constants CEC Private Constants |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup CEC_Private_Macros CEC Private Macros |
| * @{ |
| */ |
| #define IS_CEC_BIT_TIMING_ERROR_MODE(MODE) (((MODE) == CEC_BIT_TIMING_ERROR_MODE_STANDARD) || \ |
| ((MODE) == CEC_BIT_TIMING_ERROR_MODE_ERRORFREE)) |
| |
| #define IS_CEC_BIT_PERIOD_ERROR_MODE(MODE) (((MODE) == CEC_BIT_PERIOD_ERROR_MODE_STANDARD) || \ |
| ((MODE) == CEC_BIT_PERIOD_ERROR_MODE_FLEXIBLE)) |
| |
| /** @brief Check CEC message size. |
| * The message size is the payload size: without counting the header, |
| * it varies from 0 byte (ping operation, one header only, no payload) to |
| * 15 bytes (1 opcode and up to 14 operands following the header). |
| * @param __SIZE__ CEC message size. |
| * @retval Test result (TRUE or FALSE). |
| */ |
| #define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0x10U) |
| |
| /** @brief Check CEC device Own Address Register (OAR) setting. |
| * @param __ADDRESS__ CEC own address. |
| * @retval Test result (TRUE or FALSE). |
| */ |
| #define IS_CEC_OWN_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x0000000FU) |
| |
| /** @brief Check CEC initiator or destination logical address setting. |
| * Initiator and destination addresses are coded over 4 bits. |
| * @param __ADDRESS__ CEC initiator or logical address. |
| * @retval Test result (TRUE or FALSE). |
| */ |
| #define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x0000000FU) |
| /** |
| * @} |
| */ |
| /* Private functions ---------------------------------------------------------*/ |
| /** @defgroup CEC_Private_Functions CEC Private Functions |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* CEC */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* __STM32F1xx_HAL_CEC_H */ |
| |
