| /** |
| ****************************************************************************** |
| * @file stm32f1xx_hal_rtc.h |
| * @author MCD Application Team |
| * @brief Header file of RTC HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2016 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef __STM32F1xx_HAL_RTC_H |
| #define __STM32F1xx_HAL_RTC_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f1xx_hal_def.h" |
| |
| /** @addtogroup STM32F1xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup RTC |
| * @{ |
| */ |
| |
| /** @addtogroup RTC_Private_Macros |
| * @{ |
| */ |
| |
| #define IS_RTC_ASYNCH_PREDIV(PREDIV) (((PREDIV) <= 0xFFFFFU) || ((PREDIV) == RTC_AUTO_1_SECOND)) |
| #define IS_RTC_HOUR24(HOUR) ((HOUR) <= 23U) |
| #define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= 59U) |
| #define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= 59U) |
| #define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || ((FORMAT) == RTC_FORMAT_BCD)) |
| #define IS_RTC_YEAR(YEAR) ((YEAR) <= 99U) |
| #define IS_RTC_MONTH(MONTH) (((MONTH) >= 1U) && ((MONTH) <= 12U)) |
| #define IS_RTC_DATE(DATE) (((DATE) >= 1U) && ((DATE) <= 31U)) |
| #define IS_RTC_ALARM(ALARM) ((ALARM) == RTC_ALARM_A) |
| #define IS_RTC_CALIB_OUTPUT(__OUTPUT__) (((__OUTPUT__) == RTC_OUTPUTSOURCE_NONE) || \ |
| ((__OUTPUT__) == RTC_OUTPUTSOURCE_CALIBCLOCK) || \ |
| ((__OUTPUT__) == RTC_OUTPUTSOURCE_ALARM) || \ |
| ((__OUTPUT__) == RTC_OUTPUTSOURCE_SECOND)) |
| |
| |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup RTC_Private_Constants |
| * @{ |
| */ |
| /** @defgroup RTC_Timeout_Value Default Timeout Value |
| * @{ |
| */ |
| #define RTC_TIMEOUT_VALUE 1000U |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTC_EXTI_Line_Event RTC EXTI Line event |
| * @{ |
| */ |
| #define RTC_EXTI_LINE_ALARM_EVENT ((uint32_t)EXTI_IMR_MR17) /*!< External interrupt line 17 Connected to the RTC Alarm event */ |
| /** |
| * @} |
| */ |
| |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup RTC_Exported_Types RTC Exported Types |
| * @{ |
| */ |
| /** |
| * @brief RTC Time structure definition |
| */ |
| typedef struct |
| { |
| uint8_t Hours; /*!< Specifies the RTC Time Hour. |
| This parameter must be a number between Min_Data = 0 and Max_Data = 23 */ |
| |
| uint8_t Minutes; /*!< Specifies the RTC Time Minutes. |
| This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ |
| |
| uint8_t Seconds; /*!< Specifies the RTC Time Seconds. |
| This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ |
| |
| } RTC_TimeTypeDef; |
| |
| /** |
| * @brief RTC Alarm structure definition |
| */ |
| typedef struct |
| { |
| RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */ |
| |
| uint32_t Alarm; /*!< Specifies the alarm ID (only 1 alarm ID for STM32F1). |
| This parameter can be a value of @ref RTC_Alarms_Definitions */ |
| } RTC_AlarmTypeDef; |
| |
| /** |
| * @brief HAL State structures definition |
| */ |
| typedef enum |
| { |
| HAL_RTC_STATE_RESET = 0x00U, /*!< RTC not yet initialized or disabled */ |
| HAL_RTC_STATE_READY = 0x01U, /*!< RTC initialized and ready for use */ |
| HAL_RTC_STATE_BUSY = 0x02U, /*!< RTC process is ongoing */ |
| HAL_RTC_STATE_TIMEOUT = 0x03U, /*!< RTC timeout state */ |
| HAL_RTC_STATE_ERROR = 0x04U /*!< RTC error state */ |
| |
| } HAL_RTCStateTypeDef; |
| |
| /** |
| * @brief RTC Configuration Structure definition |
| */ |
| typedef struct |
| { |
| uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value. |
| This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFFFFF or RTC_AUTO_1_SECOND |
| If RTC_AUTO_1_SECOND is selected, AsynchPrediv will be set automatically to get 1sec timebase */ |
| |
| uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC Tamper pin. |
| This parameter can be a value of @ref RTC_output_source_to_output_on_the_Tamper_pin */ |
| |
| } RTC_InitTypeDef; |
| |
| /** |
| * @brief RTC Date structure definition |
| */ |
| typedef struct |
| { |
| uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay (not necessary for HAL_RTC_SetDate). |
| This parameter can be a value of @ref RTC_WeekDay_Definitions */ |
| |
| uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format). |
| This parameter can be a value of @ref RTC_Month_Date_Definitions */ |
| |
| uint8_t Date; /*!< Specifies the RTC Date. |
| This parameter must be a number between Min_Data = 1 and Max_Data = 31 */ |
| |
| uint8_t Year; /*!< Specifies the RTC Date Year. |
| This parameter must be a number between Min_Data = 0 and Max_Data = 99 */ |
| |
| } RTC_DateTypeDef; |
| |
| /** |
| * @brief Time Handle Structure definition |
| */ |
| #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) |
| typedef struct __RTC_HandleTypeDef |
| #else |
| typedef struct |
| #endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ |
| { |
| RTC_TypeDef *Instance; /*!< Register base address */ |
| |
| RTC_InitTypeDef Init; /*!< RTC required parameters */ |
| |
| RTC_DateTypeDef DateToUpdate; /*!< Current date set by user and updated automatically */ |
| |
| HAL_LockTypeDef Lock; /*!< RTC locking object */ |
| |
| __IO HAL_RTCStateTypeDef State; /*!< Time communication state */ |
| |
| #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) |
| void (* AlarmAEventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Alarm A Event callback */ |
| |
| void (* Tamper1EventCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Tamper 1 Event callback */ |
| |
| void (* MspInitCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Msp Init callback */ |
| |
| void (* MspDeInitCallback)(struct __RTC_HandleTypeDef *hrtc); /*!< RTC Msp DeInit callback */ |
| |
| #endif /* (USE_HAL_RTC_REGISTER_CALLBACKS) */ |
| |
| } RTC_HandleTypeDef; |
| |
| #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) |
| /** |
| * @brief HAL RTC Callback ID enumeration definition |
| */ |
| typedef enum |
| { |
| HAL_RTC_ALARM_A_EVENT_CB_ID = 0x00u, /*!< RTC Alarm A Event Callback ID */ |
| HAL_RTC_TAMPER1_EVENT_CB_ID = 0x04u, /*!< RTC Tamper 1 Callback ID */ |
| HAL_RTC_MSPINIT_CB_ID = 0x0Eu, /*!< RTC Msp Init callback ID */ |
| HAL_RTC_MSPDEINIT_CB_ID = 0x0Fu /*!< RTC Msp DeInit callback ID */ |
| } HAL_RTC_CallbackIDTypeDef; |
| |
| /** |
| * @brief HAL RTC Callback pointer definition |
| */ |
| typedef void (*pRTC_CallbackTypeDef)(RTC_HandleTypeDef *hrtc); /*!< pointer to an RTC callback function */ |
| #endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup RTC_Exported_Constants RTC Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup RTC_Automatic_Prediv_1_Second Automatic calculation of prediv for 1sec timebase |
| * @{ |
| */ |
| #define RTC_AUTO_1_SECOND 0xFFFFFFFFU |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTC_Input_parameter_format_definitions Input Parameter Format |
| * @{ |
| */ |
| #define RTC_FORMAT_BIN 0x000000000U |
| #define RTC_FORMAT_BCD 0x000000001U |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTC_Month_Date_Definitions Month Definitions |
| * @{ |
| */ |
| |
| /* Coded in BCD format */ |
| #define RTC_MONTH_JANUARY ((uint8_t)0x01) |
| #define RTC_MONTH_FEBRUARY ((uint8_t)0x02) |
| #define RTC_MONTH_MARCH ((uint8_t)0x03) |
| #define RTC_MONTH_APRIL ((uint8_t)0x04) |
| #define RTC_MONTH_MAY ((uint8_t)0x05) |
| #define RTC_MONTH_JUNE ((uint8_t)0x06) |
| #define RTC_MONTH_JULY ((uint8_t)0x07) |
| #define RTC_MONTH_AUGUST ((uint8_t)0x08) |
| #define RTC_MONTH_SEPTEMBER ((uint8_t)0x09) |
| #define RTC_MONTH_OCTOBER ((uint8_t)0x10) |
| #define RTC_MONTH_NOVEMBER ((uint8_t)0x11) |
| #define RTC_MONTH_DECEMBER ((uint8_t)0x12) |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTC_WeekDay_Definitions WeekDay Definitions |
| * @{ |
| */ |
| #define RTC_WEEKDAY_MONDAY ((uint8_t)0x01) |
| #define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02) |
| #define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03) |
| #define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04) |
| #define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05) |
| #define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06) |
| #define RTC_WEEKDAY_SUNDAY ((uint8_t)0x00) |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTC_Alarms_Definitions Alarms Definitions |
| * @{ |
| */ |
| #define RTC_ALARM_A 0U /*!< Specify alarm ID (mainly for legacy purposes) */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup RTC_output_source_to_output_on_the_Tamper_pin Output source to output on the Tamper pin |
| * @{ |
| */ |
| |
| #define RTC_OUTPUTSOURCE_NONE 0x00000000U /*!< No output on the TAMPER pin */ |
| #define RTC_OUTPUTSOURCE_CALIBCLOCK BKP_RTCCR_CCO /*!< RTC clock with a frequency divided by 64 on the TAMPER pin */ |
| #define RTC_OUTPUTSOURCE_ALARM BKP_RTCCR_ASOE /*!< Alarm pulse signal on the TAMPER pin */ |
| #define RTC_OUTPUTSOURCE_SECOND (BKP_RTCCR_ASOS | BKP_RTCCR_ASOE) /*!< Second pulse signal on the TAMPER pin */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTC_Interrupts_Definitions Interrupts Definitions |
| * @{ |
| */ |
| #define RTC_IT_OW RTC_CRH_OWIE /*!< Overflow interrupt */ |
| #define RTC_IT_ALRA RTC_CRH_ALRIE /*!< Alarm interrupt */ |
| #define RTC_IT_SEC RTC_CRH_SECIE /*!< Second interrupt */ |
| #define RTC_IT_TAMP1 BKP_CSR_TPIE /*!< TAMPER Pin interrupt enable */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup RTC_Flags_Definitions Flags Definitions |
| * @{ |
| */ |
| #define RTC_FLAG_RTOFF RTC_CRL_RTOFF /*!< RTC Operation OFF flag */ |
| #define RTC_FLAG_RSF RTC_CRL_RSF /*!< Registers Synchronized flag */ |
| #define RTC_FLAG_OW RTC_CRL_OWF /*!< Overflow flag */ |
| #define RTC_FLAG_ALRAF RTC_CRL_ALRF /*!< Alarm flag */ |
| #define RTC_FLAG_SEC RTC_CRL_SECF /*!< Second flag */ |
| #define RTC_FLAG_TAMP1F BKP_CSR_TEF /*!< Tamper Interrupt Flag */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| /** @defgroup RTC_Exported_macros RTC Exported Macros |
| * @{ |
| */ |
| |
| /** @brief Reset RTC handle state |
| * @param __HANDLE__: RTC handle. |
| * @retval None |
| */ |
| #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) |
| #define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) do{\ |
| (__HANDLE__)->State = HAL_RTC_STATE_RESET;\ |
| (__HANDLE__)->MspInitCallback = NULL;\ |
| (__HANDLE__)->MspDeInitCallback = NULL;\ |
| }while(0u) |
| #else |
| #define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET) |
| #endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ |
| |
| /** |
| * @brief Disable the write protection for RTC registers. |
| * @param __HANDLE__: specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CRL, RTC_CRL_CNF) |
| |
| /** |
| * @brief Enable the write protection for RTC registers. |
| * @param __HANDLE__: specifies the RTC handle. |
| * @retval None |
| */ |
| #define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CRL, RTC_CRL_CNF) |
| |
| /** |
| * @brief Enable the RTC Alarm interrupt. |
| * @param __HANDLE__: specifies the RTC handle. |
| * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled. |
| * This parameter can be any combination of the following values: |
| * @arg RTC_IT_ALRA: Alarm A interrupt |
| * @retval None |
| */ |
| #define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__)) |
| |
| /** |
| * @brief Disable the RTC Alarm interrupt. |
| * @param __HANDLE__: specifies the RTC handle. |
| * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled. |
| * This parameter can be any combination of the following values: |
| * @arg RTC_IT_ALRA: Alarm A interrupt |
| * @retval None |
| */ |
| #define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CRH, (__INTERRUPT__)) |
| |
| /** |
| * @brief Check whether the specified RTC Alarm interrupt has been enabled or not. |
| * @param __HANDLE__: specifies the RTC handle. |
| * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be checked |
| * This parameter can be: |
| * @arg RTC_IT_ALRA: Alarm A interrupt |
| * @retval None |
| */ |
| #define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((((__HANDLE__)->Instance->CRH)& ((__INTERRUPT__)))) != RESET)? SET : RESET) |
| |
| /** |
| * @brief Get the selected RTC Alarm's flag status. |
| * @param __HANDLE__: specifies the RTC handle. |
| * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled. |
| * This parameter can be: |
| * @arg RTC_FLAG_ALRAF |
| * @retval None |
| */ |
| #define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->CRL) & (__FLAG__)) != RESET)? SET : RESET) |
| |
| /** |
| * @brief Check whether the specified RTC Alarm interrupt has occurred or not. |
| * @param __HANDLE__: specifies the RTC handle. |
| * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to check. |
| * This parameter can be: |
| * @arg RTC_IT_ALRA: Alarm A interrupt |
| * @retval None |
| */ |
| #define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CRL) & (__INTERRUPT__)) != RESET)? SET : RESET) |
| |
| /** |
| * @brief Clear the RTC Alarm's pending flags. |
| * @param __HANDLE__: specifies the RTC handle. |
| * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled. |
| * This parameter can be: |
| * @arg RTC_FLAG_ALRAF |
| * @retval None |
| */ |
| #define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CRL) &= ~(__FLAG__) |
| |
| /** |
| * @brief Enable interrupt on ALARM Exti Line 17. |
| * @retval None. |
| */ |
| #define __HAL_RTC_ALARM_EXTI_ENABLE_IT() SET_BIT(EXTI->IMR, RTC_EXTI_LINE_ALARM_EVENT) |
| |
| /** |
| * @brief Disable interrupt on ALARM Exti Line 17. |
| * @retval None. |
| */ |
| #define __HAL_RTC_ALARM_EXTI_DISABLE_IT() CLEAR_BIT(EXTI->IMR, RTC_EXTI_LINE_ALARM_EVENT) |
| |
| /** |
| * @brief Enable event on ALARM Exti Line 17. |
| * @retval None. |
| */ |
| #define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT() SET_BIT(EXTI->EMR, RTC_EXTI_LINE_ALARM_EVENT) |
| |
| /** |
| * @brief Disable event on ALARM Exti Line 17. |
| * @retval None. |
| */ |
| #define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT() CLEAR_BIT(EXTI->EMR, RTC_EXTI_LINE_ALARM_EVENT) |
| |
| |
| /** |
| * @brief ALARM EXTI line configuration: set falling edge trigger. |
| * @retval None. |
| */ |
| #define __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, RTC_EXTI_LINE_ALARM_EVENT) |
| |
| |
| /** |
| * @brief Disable the ALARM Extended Interrupt Falling Trigger. |
| * @retval None. |
| */ |
| #define __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, RTC_EXTI_LINE_ALARM_EVENT) |
| |
| |
| /** |
| * @brief ALARM EXTI line configuration: set rising edge trigger. |
| * @retval None. |
| */ |
| #define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, RTC_EXTI_LINE_ALARM_EVENT) |
| |
| /** |
| * @brief Disable the ALARM Extended Interrupt Rising Trigger. |
| * This parameter can be: |
| * @retval None. |
| */ |
| #define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, RTC_EXTI_LINE_ALARM_EVENT) |
| |
| /** |
| * @brief ALARM EXTI line configuration: set rising & falling edge trigger. |
| * @retval None. |
| */ |
| #define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLING_EDGE() \ |
| do{ \ |
| __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE(); \ |
| __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE(); \ |
| } while(0U) |
| |
| /** |
| * @brief Disable the ALARM Extended Interrupt Rising & Falling Trigger. |
| * This parameter can be: |
| * @retval None. |
| */ |
| #define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLING_EDGE() \ |
| do{ \ |
| __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE(); \ |
| __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE(); \ |
| } while(0U) |
| |
| /** |
| * @brief Check whether the specified ALARM EXTI interrupt flag is set or not. |
| * @retval EXTI ALARM Line Status. |
| */ |
| #define __HAL_RTC_ALARM_EXTI_GET_FLAG() (EXTI->PR & (RTC_EXTI_LINE_ALARM_EVENT)) |
| |
| /** |
| * @brief Clear the ALARM EXTI flag. |
| * @retval None. |
| */ |
| #define __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() (EXTI->PR = (RTC_EXTI_LINE_ALARM_EVENT)) |
| |
| /** |
| * @brief Generate a Software interrupt on selected EXTI line. |
| * @retval None. |
| */ |
| #define __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER, RTC_EXTI_LINE_ALARM_EVENT) |
| /** |
| * @} |
| */ |
| |
| /* Include RTC HAL Extension module */ |
| #include "stm32f1xx_hal_rtc_ex.h" |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup RTC_Exported_Functions |
| * @{ |
| */ |
| |
| |
| /* Initialization and de-initialization functions ****************************/ |
| /** @addtogroup RTC_Exported_Functions_Group1 |
| * @{ |
| */ |
| HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc); |
| void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc); |
| void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc); |
| |
| /* Callbacks Register/UnRegister functions ***********************************/ |
| #if (USE_HAL_RTC_REGISTER_CALLBACKS == 1) |
| HAL_StatusTypeDef HAL_RTC_RegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID, pRTC_CallbackTypeDef pCallback); |
| HAL_StatusTypeDef HAL_RTC_UnRegisterCallback(RTC_HandleTypeDef *hrtc, HAL_RTC_CallbackIDTypeDef CallbackID); |
| #endif /* USE_HAL_RTC_REGISTER_CALLBACKS */ |
| /** |
| * @} |
| */ |
| |
| /* RTC Time and Date functions ************************************************/ |
| /** @addtogroup RTC_Exported_Functions_Group2 |
| * @{ |
| */ |
| HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); |
| HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); |
| HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); |
| HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); |
| /** |
| * @} |
| */ |
| |
| /* RTC Alarm functions ********************************************************/ |
| /** @addtogroup RTC_Exported_Functions_Group3 |
| * @{ |
| */ |
| HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); |
| HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); |
| HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm); |
| HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format); |
| void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc); |
| HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); |
| void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc); |
| /** |
| * @} |
| */ |
| |
| /* Peripheral State functions *************************************************/ |
| /** @addtogroup RTC_Exported_Functions_Group4 |
| * @{ |
| */ |
| HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc); |
| /** |
| * @} |
| */ |
| |
| /* Peripheral Control functions ***********************************************/ |
| /** @addtogroup RTC_Exported_Functions_Group5 |
| * @{ |
| */ |
| HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef *hrtc); |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* __STM32F1xx_HAL_RTC_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
