| /** |
| ****************************************************************************** |
| * @file stm32f1xx_ll_system.h |
| * @author MCD Application Team |
| * @brief Header file of SYSTEM LL module. |
| @verbatim |
| ============================================================================== |
| ##### How to use this driver ##### |
| ============================================================================== |
| [..] |
| The LL SYSTEM driver contains a set of generic APIs that can be |
| used by user: |
| (+) Some of the FLASH features need to be handled in the SYSTEM file. |
| (+) Access to DBGCMU registers |
| (+) Access to SYSCFG registers |
| |
| @endverbatim |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2016 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef __STM32F1xx_LL_SYSTEM_H |
| #define __STM32F1xx_LL_SYSTEM_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f1xx.h" |
| |
| /** @addtogroup STM32F1xx_LL_Driver |
| * @{ |
| */ |
| |
| #if defined (FLASH) || defined (DBGMCU) |
| |
| /** @defgroup SYSTEM_LL SYSTEM |
| * @{ |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants |
| * @{ |
| */ |
| |
| |
| |
| /** @defgroup SYSTEM_LL_EC_TRACE DBGMCU TRACE Pin Assignment |
| * @{ |
| */ |
| #define LL_DBGMCU_TRACE_NONE 0x00000000U /*!< TRACE pins not assigned (default state) */ |
| #define LL_DBGMCU_TRACE_ASYNCH DBGMCU_CR_TRACE_IOEN /*!< TRACE pin assignment for Asynchronous Mode */ |
| #define LL_DBGMCU_TRACE_SYNCH_SIZE1 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */ |
| #define LL_DBGMCU_TRACE_SYNCH_SIZE2 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */ |
| #define LL_DBGMCU_TRACE_SYNCH_SIZE4 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP |
| * @{ |
| */ |
| #define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_CR_DBG_TIM2_STOP /*!< TIM2 counter stopped when core is halted */ |
| #define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_CR_DBG_TIM3_STOP /*!< TIM3 counter stopped when core is halted */ |
| #define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBGMCU_CR_DBG_TIM4_STOP /*!< TIM4 counter stopped when core is halted */ |
| #if defined(DBGMCU_CR_DBG_TIM5_STOP) |
| #define LL_DBGMCU_APB1_GRP1_TIM5_STOP DBGMCU_CR_DBG_TIM5_STOP /*!< TIM5 counter stopped when core is halted */ |
| #endif /* DBGMCU_CR_DBG_TIM5_STOP */ |
| #if defined(DBGMCU_CR_DBG_TIM6_STOP) |
| #define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_CR_DBG_TIM6_STOP /*!< TIM6 counter stopped when core is halted */ |
| #endif /* DBGMCU_CR_DBG_TIM6_STOP */ |
| #if defined(DBGMCU_CR_DBG_TIM7_STOP) |
| #define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_CR_DBG_TIM7_STOP /*!< TIM7 counter stopped when core is halted */ |
| #endif /* DBGMCU_CR_DBG_TIM7_STOP */ |
| #if defined(DBGMCU_CR_DBG_TIM12_STOP) |
| #define LL_DBGMCU_APB1_GRP1_TIM12_STOP DBGMCU_CR_DBG_TIM12_STOP /*!< TIM12 counter stopped when core is halted */ |
| #endif /* DBGMCU_CR_DBG_TIM12_STOP */ |
| #if defined(DBGMCU_CR_DBG_TIM13_STOP) |
| #define LL_DBGMCU_APB1_GRP1_TIM13_STOP DBGMCU_CR_DBG_TIM13_STOP /*!< TIM13 counter stopped when core is halted */ |
| #endif /* DBGMCU_CR_DBG_TIM13_STOP */ |
| #if defined(DBGMCU_CR_DBG_TIM14_STOP) |
| #define LL_DBGMCU_APB1_GRP1_TIM14_STOP DBGMCU_CR_DBG_TIM14_STOP /*!< TIM14 counter stopped when core is halted */ |
| #endif /* DBGMCU_CR_DBG_TIM14_STOP */ |
| #define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_CR_DBG_WWDG_STOP /*!< Debug Window Watchdog stopped when Core is halted */ |
| #define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_CR_DBG_IWDG_STOP /*!< Debug Independent Watchdog stopped when Core is halted */ |
| #define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_CR_DBG_I2C1_SMBUS_TIMEOUT /*!< I2C1 SMBUS timeout mode stopped when Core is halted */ |
| #if defined(DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT) |
| #define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT /*!< I2C2 SMBUS timeout mode stopped when Core is halted */ |
| #endif /* DBGMCU_CR_DBG_I2C2_SMBUS_TIMEOUT */ |
| #if defined(DBGMCU_CR_DBG_CAN1_STOP) |
| #define LL_DBGMCU_APB1_GRP1_CAN1_STOP DBGMCU_CR_DBG_CAN1_STOP /*!< CAN1 debug stopped when Core is halted */ |
| #endif /* DBGMCU_CR_DBG_CAN1_STOP */ |
| #if defined(DBGMCU_CR_DBG_CAN2_STOP) |
| #define LL_DBGMCU_APB1_GRP1_CAN2_STOP DBGMCU_CR_DBG_CAN2_STOP /*!< CAN2 debug stopped when Core is halted */ |
| #endif /* DBGMCU_CR_DBG_CAN2_STOP */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP |
| * @{ |
| */ |
| #define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBGMCU_CR_DBG_TIM1_STOP /*!< TIM1 counter stopped when core is halted */ |
| #if defined(DBGMCU_CR_DBG_TIM8_STOP) |
| #define LL_DBGMCU_APB2_GRP1_TIM8_STOP DBGMCU_CR_DBG_TIM8_STOP /*!< TIM8 counter stopped when core is halted */ |
| #endif /* DBGMCU_CR_DBG_CAN1_STOP */ |
| #if defined(DBGMCU_CR_DBG_TIM9_STOP) |
| #define LL_DBGMCU_APB2_GRP1_TIM9_STOP DBGMCU_CR_DBG_TIM9_STOP /*!< TIM9 counter stopped when core is halted */ |
| #endif /* DBGMCU_CR_DBG_TIM9_STOP */ |
| #if defined(DBGMCU_CR_DBG_TIM10_STOP) |
| #define LL_DBGMCU_APB2_GRP1_TIM10_STOP DBGMCU_CR_DBG_TIM10_STOP /*!< TIM10 counter stopped when core is halted */ |
| #endif /* DBGMCU_CR_DBG_TIM10_STOP */ |
| #if defined(DBGMCU_CR_DBG_TIM11_STOP) |
| #define LL_DBGMCU_APB2_GRP1_TIM11_STOP DBGMCU_CR_DBG_TIM11_STOP /*!< TIM11 counter stopped when core is halted */ |
| #endif /* DBGMCU_CR_DBG_TIM11_STOP */ |
| #if defined(DBGMCU_CR_DBG_TIM15_STOP) |
| #define LL_DBGMCU_APB2_GRP1_TIM15_STOP DBGMCU_CR_DBG_TIM15_STOP /*!< TIM15 counter stopped when core is halted */ |
| #endif /* DBGMCU_CR_DBG_TIM15_STOP */ |
| #if defined(DBGMCU_CR_DBG_TIM16_STOP) |
| #define LL_DBGMCU_APB2_GRP1_TIM16_STOP DBGMCU_CR_DBG_TIM16_STOP /*!< TIM16 counter stopped when core is halted */ |
| #endif /* DBGMCU_CR_DBG_TIM16_STOP */ |
| #if defined(DBGMCU_CR_DBG_TIM17_STOP) |
| #define LL_DBGMCU_APB2_GRP1_TIM17_STOP DBGMCU_CR_DBG_TIM17_STOP /*!< TIM17 counter stopped when core is halted */ |
| #endif /* DBGMCU_CR_DBG_TIM17_STOP */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY |
| * @{ |
| */ |
| #if defined(FLASH_ACR_LATENCY) |
| #define LL_FLASH_LATENCY_0 0x00000000U /*!< FLASH Zero Latency cycle */ |
| #define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_0 /*!< FLASH One Latency cycle */ |
| #define LL_FLASH_LATENCY_2 FLASH_ACR_LATENCY_1 /*!< FLASH Two wait states */ |
| #else |
| #endif /* FLASH_ACR_LATENCY */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions |
| * @{ |
| */ |
| |
| |
| |
| /** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU |
| * @{ |
| */ |
| |
| /** |
| * @brief Return the device identifier |
| * @note For Low Density devices, the device ID is 0x412 |
| * @note For Medium Density devices, the device ID is 0x410 |
| * @note For High Density devices, the device ID is 0x414 |
| * @note For XL Density devices, the device ID is 0x430 |
| * @note For Connectivity Line devices, the device ID is 0x418 |
| * @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID |
| * @retval Values between Min_Data=0x00 and Max_Data=0xFFF |
| */ |
| __STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void) |
| { |
| return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID)); |
| } |
| |
| /** |
| * @brief Return the device revision identifier |
| * @note This field indicates the revision of the device. |
| For example, it is read as revA -> 0x1000,for Low Density devices |
| For example, it is read as revA -> 0x0000, revB -> 0x2000, revZ -> 0x2001, rev1,2,3,X or Y -> 0x2003,for Medium Density devices |
| For example, it is read as revA or 1 -> 0x1000, revZ -> 0x1001,rev1,2,3,X or Y -> 0x1003,for Medium Density devices |
| For example, it is read as revA or 1 -> 0x1003,for XL Density devices |
| For example, it is read as revA -> 0x1000, revZ -> 0x1001 for Connectivity line devices |
| * @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID |
| * @retval Values between Min_Data=0x00 and Max_Data=0xFFFF |
| */ |
| __STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void) |
| { |
| return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos); |
| } |
| |
| /** |
| * @brief Enable the Debug Module during SLEEP mode |
| * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void) |
| { |
| SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); |
| } |
| |
| /** |
| * @brief Disable the Debug Module during SLEEP mode |
| * @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void) |
| { |
| CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP); |
| } |
| |
| /** |
| * @brief Enable the Debug Module during STOP mode |
| * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void) |
| { |
| SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); |
| } |
| |
| /** |
| * @brief Disable the Debug Module during STOP mode |
| * @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void) |
| { |
| CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP); |
| } |
| |
| /** |
| * @brief Enable the Debug Module during STANDBY mode |
| * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void) |
| { |
| SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); |
| } |
| |
| /** |
| * @brief Disable the Debug Module during STANDBY mode |
| * @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void) |
| { |
| CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY); |
| } |
| |
| /** |
| * @brief Set Trace pin assignment control |
| * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_SetTracePinAssignment\n |
| * DBGMCU_CR TRACE_MODE LL_DBGMCU_SetTracePinAssignment |
| * @param PinAssignment This parameter can be one of the following values: |
| * @arg @ref LL_DBGMCU_TRACE_NONE |
| * @arg @ref LL_DBGMCU_TRACE_ASYNCH |
| * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1 |
| * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2 |
| * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment) |
| { |
| MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment); |
| } |
| |
| /** |
| * @brief Get Trace pin assignment control |
| * @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_GetTracePinAssignment\n |
| * DBGMCU_CR TRACE_MODE LL_DBGMCU_GetTracePinAssignment |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DBGMCU_TRACE_NONE |
| * @arg @ref LL_DBGMCU_TRACE_ASYNCH |
| * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1 |
| * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2 |
| * @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4 |
| */ |
| __STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment(void) |
| { |
| return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE)); |
| } |
| |
| /** |
| * @brief Freeze APB1 peripherals (group1 peripherals) |
| * @rmtoll DBGMCU_CR_APB1 DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP (*) |
| * @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP (*) |
| * @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs) |
| { |
| SET_BIT(DBGMCU->CR, Periphs); |
| } |
| |
| /** |
| * @brief Unfreeze APB1 peripherals (group1 peripherals) |
| * @rmtoll DBGMCU_CR_APB1 DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n |
| * DBGMCU_CR_APB1 DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP |
| * @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP (*) |
| * @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP (*) |
| * @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs) |
| { |
| CLEAR_BIT(DBGMCU->CR, Periphs); |
| } |
| |
| /** |
| * @brief Freeze APB2 peripherals |
| * @rmtoll DBGMCU_CR_APB2 DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB2 DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB2 DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB2 DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB2 DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB2 DBG_TIM15_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB2 DBG_TIM16_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB2 DBG_TIM17_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP |
| * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*) |
| * @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP (*) |
| * @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP (*) |
| * @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP (*) |
| * @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP (*) |
| * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP (*) |
| * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs) |
| { |
| SET_BIT(DBGMCU->CR, Periphs); |
| } |
| |
| /** |
| * @brief Unfreeze APB2 peripherals |
| * @rmtoll DBGMCU_CR_APB2 DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB2 DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB2 DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB2 DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB2 DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB2 DBG_TIM15_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB2 DBG_TIM16_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n |
| * DBGMCU_CR_APB2 DBG_TIM17_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph |
| * @param Periphs This parameter can be a combination of the following values: |
| * @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP |
| * @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP (*) |
| * @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP (*) |
| * @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP (*) |
| * @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP (*) |
| * @arg @ref LL_DBGMCU_APB2_GRP1_TIM15_STOP (*) |
| * @arg @ref LL_DBGMCU_APB2_GRP1_TIM16_STOP (*) |
| * @arg @ref LL_DBGMCU_APB2_GRP1_TIM17_STOP (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs) |
| { |
| CLEAR_BIT(DBGMCU->CR, Periphs); |
| } |
| /** |
| * @} |
| */ |
| |
| #if defined(FLASH_ACR_LATENCY) |
| /** @defgroup SYSTEM_LL_EF_FLASH FLASH |
| * @{ |
| */ |
| |
| /** |
| * @brief Set FLASH Latency |
| * @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency |
| * @param Latency This parameter can be one of the following values: |
| * @arg @ref LL_FLASH_LATENCY_0 |
| * @arg @ref LL_FLASH_LATENCY_1 |
| * @arg @ref LL_FLASH_LATENCY_2 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency) |
| { |
| MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency); |
| } |
| |
| /** |
| * @brief Get FLASH Latency |
| * @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_FLASH_LATENCY_0 |
| * @arg @ref LL_FLASH_LATENCY_1 |
| * @arg @ref LL_FLASH_LATENCY_2 |
| */ |
| __STATIC_INLINE uint32_t LL_FLASH_GetLatency(void) |
| { |
| return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY)); |
| } |
| |
| /** |
| * @brief Enable Prefetch |
| * @rmtoll FLASH_ACR PRFTBE LL_FLASH_EnablePrefetch |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_FLASH_EnablePrefetch(void) |
| { |
| SET_BIT(FLASH->ACR, FLASH_ACR_PRFTBE); |
| } |
| |
| /** |
| * @brief Disable Prefetch |
| * @rmtoll FLASH_ACR PRFTBE LL_FLASH_DisablePrefetch |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_FLASH_DisablePrefetch(void) |
| { |
| CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTBE); |
| } |
| |
| /** |
| * @brief Check if Prefetch buffer is enabled |
| * @rmtoll FLASH_ACR PRFTBS LL_FLASH_IsPrefetchEnabled |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void) |
| { |
| return (READ_BIT(FLASH->ACR, FLASH_ACR_PRFTBS) == (FLASH_ACR_PRFTBS)); |
| } |
| |
| #endif /* FLASH_ACR_LATENCY */ |
| /** |
| * @brief Enable Flash Half Cycle Access |
| * @rmtoll FLASH_ACR HLFCYA LL_FLASH_EnableHalfCycleAccess |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_FLASH_EnableHalfCycleAccess(void) |
| { |
| SET_BIT(FLASH->ACR, FLASH_ACR_HLFCYA); |
| } |
| |
| /** |
| * @brief Disable Flash Half Cycle Access |
| * @rmtoll FLASH_ACR HLFCYA LL_FLASH_DisableHalfCycleAccess |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_FLASH_DisableHalfCycleAccess(void) |
| { |
| CLEAR_BIT(FLASH->ACR, FLASH_ACR_HLFCYA); |
| } |
| |
| /** |
| * @brief Check if Flash Half Cycle Access is enabled or not |
| * @rmtoll FLASH_ACR HLFCYA LL_FLASH_IsHalfCycleAccessEnabled |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_FLASH_IsHalfCycleAccessEnabled(void) |
| { |
| return (READ_BIT(FLASH->ACR, FLASH_ACR_HLFCYA) == (FLASH_ACR_HLFCYA)); |
| } |
| |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* defined (FLASH) || defined (DBGMCU) */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* __STM32F1xx_LL_SYSTEM_H */ |
