blob: 41c58a6c6ee8a991b5239590df2225ad683f3854 [file] [log] [blame]
/**
******************************************************************************
* @file stm32f2xx_hal_timebase_rtc_alarm_template.c
* @author MCD Application Team
* @brief HAL time base based on the hardware RTC_ALARM Template.
*
* This file override the native HAL time base functions (defined as weak)
* to use the RTC ALARM for time base generation:
* + Intializes the RTC peripheral with required prescalers value for each
* RTC clock source (HSE, LSE or LSI)
* + The alarm is configured to assert an interrupt when the RTC reaches 1ms
* + HAL_IncTick is called at each Alarm event and the time is reset to 00:00:00
* + HSE (default), LSE or LSI can be selected as RTC clock source
*
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
This file must be copied to the application folder and modified as follows:
(#) Rename it to 'stm32f2xx_hal_timebase_rtc_alarm.c'
(#) Add this file and the RTC HAL drivers to your project and uncomment
HAL_RTC_MODULE_ENABLED define in stm32f2xx_hal_conf.h
[..]
(@) HAL RTC alarm and HAL RTC wakeup drivers can’t be used with low power modes:
The wake up capability of the RTC may be intrusive in case of prior low power mode
configuration requiring different wake up sources.
Application/Example behavior is no more guaranteed
(@) The stm32f2xx_hal_timebase_tim use is recommended for the Applications/Examples
requiring low power modes
@endverbatim
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx_hal.h"
/** @addtogroup STM32F2xx_HAL_Driver
* @{
*/
/** @defgroup HAL_TimeBase_RTC_Alarm_Template HAL TimeBase RTC Alarm Template
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Uncomment the line below to select the appropriate RTC Clock source for your application:
+ RTC_CLOCK_SOURCE_HSE: can be selected for applications requiring timing precision.
+ RTC_CLOCK_SOURCE_LSE: can be selected for applications with low constraint on timing
precision.
+ RTC_CLOCK_SOURCE_LSI: can be selected for applications with low constraint on timing
precision.
*/
#define RTC_CLOCK_SOURCE_HSE
/* #define RTC_CLOCK_SOURCE_LSE */
/* #define RTC_CLOCK_SOURCE_LSI */
#ifdef RTC_CLOCK_SOURCE_HSE
#define RTC_ASYNCH_PREDIV 9U
#define RTC_SYNCH_PREDIV 9U
#define RCC_RTCCLKSOURCE_1MHZ ((uint32_t)((uint32_t)RCC_BDCR_RTCSEL | (uint32_t)((HSE_VALUE/1000000U) << 16U)))
#elif defined (RTC_CLOCK_SOURCE_LSE)
#define RTC_ASYNCH_PREDIV 2U
#define RTC_SYNCH_PREDIV 0U
#else /* RTC_CLOCK_SOURCE_LSI */
#define RTC_ASYNCH_PREDIV 1U
#define RTC_SYNCH_PREDIV 0U
#endif /* RTC_CLOCK_SOURCE_HSE */
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
RTC_HandleTypeDef hRTC_Handle;
/* Private function prototypes -----------------------------------------------*/
void RTC_Alarm_IRQHandler(void);
/* Private functions ---------------------------------------------------------*/
/**
* @brief This function configures the RTC_ALARMA as a time base source.
* The time source is configured to have 1ms time base with a dedicated
* Tick interrupt priority.
* @note This function is called automatically at the beginning of program after
* reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig().
* @param TickPriority Tick interrupt priority.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
{
__IO uint32_t counter = 0U;
RCC_OscInitTypeDef RCC_OscInitStruct;
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
HAL_StatusTypeDef status;
#ifdef RTC_CLOCK_SOURCE_LSE
/* Configue LSE as RTC clock soucre */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
RCC_OscInitStruct.LSEState = RCC_LSE_ON;
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE;
#elif defined (RTC_CLOCK_SOURCE_LSI)
/* Configue LSI as RTC clock soucre */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
RCC_OscInitStruct.LSIState = RCC_LSI_ON;
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
#elif defined (RTC_CLOCK_SOURCE_HSE)
/* Configue HSE as RTC clock soucre */
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
/* Ensure that RTC is clocked by 1MHz */
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_1MHZ;
#else
#error Please select the RTC Clock source
#endif /* RTC_CLOCK_SOURCE_LSE */
status = HAL_RCC_OscConfig(&RCC_OscInitStruct);
if (status == HAL_OK)
{
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC;
status = HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
}
if (status == HAL_OK)
{
/* Enable RTC Clock */
__HAL_RCC_RTC_ENABLE();
/* The time base should be 1ms
Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1) * ALARM_VALUE) / RTC_CLOCK
HSE as RTC clock
Time base = ((9 + 1) * (9 + 1) * 10) / 1MHz
= 1ms
LSE as RTC clock
Time base = ((2 + 1) * (0 + 1) * 11) / 32.768KHz
= ~1ms
LSI as RTC clock
Time base = ((1 + 1) * (0 + 1) * 16) / 32KHz
= 1ms
*/
hRTC_Handle.Instance = RTC;
hRTC_Handle.Init.HourFormat = RTC_HOURFORMAT_24;
hRTC_Handle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV;
hRTC_Handle.Init.SynchPrediv = RTC_SYNCH_PREDIV;
hRTC_Handle.Init.OutPut = RTC_OUTPUT_DISABLE;
hRTC_Handle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH;
hRTC_Handle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN;
status = HAL_RTC_Init(&hRTC_Handle);
}
if (status == HAL_OK)
{
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle);
/* Disable the Alarm A interrupt */
__HAL_RTC_ALARMA_DISABLE(&hRTC_Handle);
/* Clear flag alarm A */
__HAL_RTC_ALARM_CLEAR_FLAG(&hRTC_Handle, RTC_FLAG_ALRAF);
counter = 0U;
/* Wait till RTC ALRAWF flag is set and if Time out is reached exit */
while (__HAL_RTC_ALARM_GET_FLAG(&hRTC_Handle, RTC_FLAG_ALRAWF) == RESET)
{
if (counter++ == SystemCoreClock / 48U) /* Timeout = ~ 1s */
{
status = HAL_ERROR;
}
}
}
if (status == HAL_OK)
{
/* Set alarm value for each RTC clock source */
#ifdef RTC_CLOCK_SOURCE_HSE
hRTC_Handle.Instance->ALRMAR = 0x10U;
#elif defined (RTC_CLOCK_SOURCE_LSE)
hRTC_Handle.Instance->ALRMAR = 0x11U;
#else
hRTC_Handle.Instance->ALRMAR = 0x16U;
#endif
/* Configure the Alarm state: Enable Alarm */
__HAL_RTC_ALARMA_ENABLE(&hRTC_Handle);
/* Configure the Alarm interrupt */
__HAL_RTC_ALARM_ENABLE_IT(&hRTC_Handle, RTC_IT_ALRA);
/* RTC Alarm Interrupt Configuration: EXTI configuration */
__HAL_RTC_ALARM_EXTI_ENABLE_IT();
__HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE();
/* Check if the Initialization mode is set */
if ((hRTC_Handle.Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET)
{
/* Set the Initialization mode */
hRTC_Handle.Instance->ISR = (uint32_t)RTC_INIT_MASK;
counter = 0U;
while ((hRTC_Handle.Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET)
{
if (counter++ == SystemCoreClock / 48U) /* Timeout = ~ 1s */
{
status = HAL_ERROR;
}
}
}
}
if (status == HAL_OK)
{
hRTC_Handle.Instance->DR = 0U;
hRTC_Handle.Instance->TR = 0U;
hRTC_Handle.Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle);
/* Enable the RTC Alarm Interrupt */
HAL_NVIC_EnableIRQ(RTC_Alarm_IRQn);
/* Configure the SysTick IRQ priority */
if (TickPriority < (1UL << __NVIC_PRIO_BITS))
{
HAL_NVIC_SetPriority(RTC_Alarm_IRQn, TickPriority, 0U);
uwTickPrio = TickPriority;
}
else
{
status = HAL_ERROR;
}
}
return status;
}
/**
* @brief Suspend Tick increment.
* @note Disable the tick increment by disabling RTC ALARM interrupt.
* @param None
* @retval None
*/
void HAL_SuspendTick(void)
{
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle);
/* Disable RTC ALARM update Interrupt */
__HAL_RTC_ALARM_DISABLE_IT(&hRTC_Handle, RTC_IT_ALRA);
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle);
}
/**
* @brief Resume Tick increment.
* @note Enable the tick increment by Enabling RTC ALARM interrupt.
* @param None
* @retval None
*/
void HAL_ResumeTick(void)
{
/* Disable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle);
/* Enable RTC ALARM Update interrupt */
__HAL_RTC_ALARM_ENABLE_IT(&hRTC_Handle, RTC_IT_ALRA);
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle);
}
/**
* @brief ALARM A Event Callback in non blocking mode
* @note This function is called when RTC_ALARM interrupt took place, inside
* RTC_ALARM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment
* a global variable "uwTick" used as application time base.
* @param hrtc RTC handle
* @retval None
*/
void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc)
{
__IO uint32_t counter = 0U;
HAL_IncTick();
__HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
/* Set the Initialization mode */
hrtc->Instance->ISR = (uint32_t)RTC_INIT_MASK;
while((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET)
{
if(counter++ == SystemCoreClock /48U) /* Timeout = ~ 1s */
{
break;
}
}
hrtc->Instance->DR = 0U;
hrtc->Instance->TR = 0U;
hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
/* Enable the write protection for RTC registers */
__HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
}
/**
* @brief This function handles RTC ALARM interrupt request.
* @param None
* @retval None
*/
void RTC_Alarm_IRQHandler(void)
{
HAL_RTC_AlarmIRQHandler(&hRTC_Handle);
}
/**
* @}
*/
/**
* @}
*/