| /** |
| ****************************************************************************** |
| * @file stm32f2xx_ll_adc.c |
| * @author MCD Application Team |
| * @brief ADC LL module driver |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2016 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| #if defined(USE_FULL_LL_DRIVER) |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f2xx_ll_adc.h" |
| #include "stm32f2xx_ll_bus.h" |
| |
| #ifdef USE_FULL_ASSERT |
| #include "stm32_assert.h" |
| #else |
| #define assert_param(expr) ((void)0U) |
| #endif |
| |
| /** @addtogroup STM32F2xx_LL_Driver |
| * @{ |
| */ |
| |
| #if defined (ADC1) || defined (ADC2) || defined (ADC3) |
| |
| /** @addtogroup ADC_LL ADC |
| * @{ |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private constants ---------------------------------------------------------*/ |
| /* Private macros ------------------------------------------------------------*/ |
| |
| /** @addtogroup ADC_LL_Private_Macros |
| * @{ |
| */ |
| |
| /* Check of parameters for configuration of ADC hierarchical scope: */ |
| /* common to several ADC instances. */ |
| #define IS_LL_ADC_COMMON_CLOCK(__CLOCK__) \ |
| ( ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV2) \ |
| || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV4) \ |
| || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV6) \ |
| || ((__CLOCK__) == LL_ADC_CLOCK_SYNC_PCLK_DIV8) \ |
| ) |
| |
| /* Check of parameters for configuration of ADC hierarchical scope: */ |
| /* ADC instance. */ |
| #define IS_LL_ADC_RESOLUTION(__RESOLUTION__) \ |
| ( ((__RESOLUTION__) == LL_ADC_RESOLUTION_12B) \ |
| || ((__RESOLUTION__) == LL_ADC_RESOLUTION_10B) \ |
| || ((__RESOLUTION__) == LL_ADC_RESOLUTION_8B) \ |
| || ((__RESOLUTION__) == LL_ADC_RESOLUTION_6B) \ |
| ) |
| |
| #define IS_LL_ADC_DATA_ALIGN(__DATA_ALIGN__) \ |
| ( ((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_RIGHT) \ |
| || ((__DATA_ALIGN__) == LL_ADC_DATA_ALIGN_LEFT) \ |
| ) |
| |
| #define IS_LL_ADC_SCAN_SELECTION(__SCAN_SELECTION__) \ |
| ( ((__SCAN_SELECTION__) == LL_ADC_SEQ_SCAN_DISABLE) \ |
| || ((__SCAN_SELECTION__) == LL_ADC_SEQ_SCAN_ENABLE) \ |
| ) |
| |
| #define IS_LL_ADC_SEQ_SCAN_MODE(__SEQ_SCAN_MODE__) \ |
| ( ((__SCAN_MODE__) == LL_ADC_SEQ_SCAN_DISABLE) \ |
| || ((__SCAN_MODE__) == LL_ADC_SEQ_SCAN_ENABLE) \ |
| ) |
| |
| /* Check of parameters for configuration of ADC hierarchical scope: */ |
| /* ADC group regular */ |
| #define IS_LL_ADC_REG_TRIG_SOURCE(__REG_TRIG_SOURCE__) \ |
| ( ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_SOFTWARE) \ |
| || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH1) \ |
| || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH2) \ |
| || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM1_CH3) \ |
| || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH2) \ |
| || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH3) \ |
| || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_CH4) \ |
| || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM2_TRGO) \ |
| || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_CH1) \ |
| || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM3_TRGO) \ |
| || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM4_CH4) \ |
| || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM5_CH1) \ |
| || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM5_CH2) \ |
| || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM5_CH3) \ |
| || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM8_CH1) \ |
| || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_TIM8_TRGO) \ |
| || ((__REG_TRIG_SOURCE__) == LL_ADC_REG_TRIG_EXT_EXTI_LINE11) \ |
| ) |
| #define IS_LL_ADC_REG_CONTINUOUS_MODE(__REG_CONTINUOUS_MODE__) \ |
| ( ((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_SINGLE) \ |
| || ((__REG_CONTINUOUS_MODE__) == LL_ADC_REG_CONV_CONTINUOUS) \ |
| ) |
| |
| #define IS_LL_ADC_REG_DMA_TRANSFER(__REG_DMA_TRANSFER__) \ |
| ( ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_NONE) \ |
| || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_LIMITED) \ |
| || ((__REG_DMA_TRANSFER__) == LL_ADC_REG_DMA_TRANSFER_UNLIMITED) \ |
| ) |
| |
| #define IS_LL_ADC_REG_FLAG_EOC_SELECTION(__REG_FLAG_EOC_SELECTION__) \ |
| ( ((__REG_FLAG_EOC_SELECTION__) == LL_ADC_REG_FLAG_EOC_SEQUENCE_CONV) \ |
| || ((__REG_FLAG_EOC_SELECTION__) == LL_ADC_REG_FLAG_EOC_UNITARY_CONV) \ |
| ) |
| |
| #define IS_LL_ADC_REG_SEQ_SCAN_LENGTH(__REG_SEQ_SCAN_LENGTH__) \ |
| ( ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_DISABLE) \ |
| || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_2RANKS) \ |
| || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_3RANKS) \ |
| || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_4RANKS) \ |
| || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_5RANKS) \ |
| || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_6RANKS) \ |
| || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_7RANKS) \ |
| || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_8RANKS) \ |
| || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_9RANKS) \ |
| || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_10RANKS) \ |
| || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_11RANKS) \ |
| || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_12RANKS) \ |
| || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_13RANKS) \ |
| || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_14RANKS) \ |
| || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_15RANKS) \ |
| || ((__REG_SEQ_SCAN_LENGTH__) == LL_ADC_REG_SEQ_SCAN_ENABLE_16RANKS) \ |
| ) |
| |
| #define IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(__REG_SEQ_DISCONT_MODE__) \ |
| ( ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_DISABLE) \ |
| || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_1RANK) \ |
| || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_2RANKS) \ |
| || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_3RANKS) \ |
| || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_4RANKS) \ |
| || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_5RANKS) \ |
| || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_6RANKS) \ |
| || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_7RANKS) \ |
| || ((__REG_SEQ_DISCONT_MODE__) == LL_ADC_REG_SEQ_DISCONT_8RANKS) \ |
| ) |
| |
| /* Check of parameters for configuration of ADC hierarchical scope: */ |
| /* ADC group injected */ |
| #define IS_LL_ADC_INJ_TRIG_SOURCE(__INJ_TRIG_SOURCE__) \ |
| ( ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_SOFTWARE) \ |
| || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_CH4) \ |
| || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM1_TRGO) \ |
| || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_CH1) \ |
| || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM2_TRGO) \ |
| || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM3_CH2) \ |
| || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM3_CH4) \ |
| || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_CH1) \ |
| || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_CH2) \ |
| || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_CH3) \ |
| || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM4_TRGO) \ |
| || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM5_CH4) \ |
| || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM5_TRGO) \ |
| || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH2) \ |
| || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH3) \ |
| || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_TIM8_CH4) \ |
| || ((__INJ_TRIG_SOURCE__) == LL_ADC_INJ_TRIG_EXT_EXTI_LINE15) \ |
| ) |
| |
| #define IS_LL_ADC_INJ_TRIG_EXT_EDGE(__INJ_TRIG_EXT_EDGE__) \ |
| ( ((__INJ_TRIG_EXT_EDGE__) == LL_ADC_INJ_TRIG_EXT_RISING) \ |
| || ((__INJ_TRIG_EXT_EDGE__) == LL_ADC_INJ_TRIG_EXT_FALLING) \ |
| || ((__INJ_TRIG_EXT_EDGE__) == LL_ADC_INJ_TRIG_EXT_RISINGFALLING) \ |
| ) |
| |
| #define IS_LL_ADC_INJ_TRIG_AUTO(__INJ_TRIG_AUTO__) \ |
| ( ((__INJ_TRIG_AUTO__) == LL_ADC_INJ_TRIG_INDEPENDENT) \ |
| || ((__INJ_TRIG_AUTO__) == LL_ADC_INJ_TRIG_FROM_GRP_REGULAR) \ |
| ) |
| |
| #define IS_LL_ADC_INJ_SEQ_SCAN_LENGTH(__INJ_SEQ_SCAN_LENGTH__) \ |
| ( ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_DISABLE) \ |
| || ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_ENABLE_2RANKS) \ |
| || ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_ENABLE_3RANKS) \ |
| || ((__INJ_SEQ_SCAN_LENGTH__) == LL_ADC_INJ_SEQ_SCAN_ENABLE_4RANKS) \ |
| ) |
| |
| #define IS_LL_ADC_INJ_SEQ_SCAN_DISCONT_MODE(__INJ_SEQ_DISCONT_MODE__) \ |
| ( ((__INJ_SEQ_DISCONT_MODE__) == LL_ADC_INJ_SEQ_DISCONT_DISABLE) \ |
| || ((__INJ_SEQ_DISCONT_MODE__) == LL_ADC_INJ_SEQ_DISCONT_1RANK) \ |
| ) |
| |
| #if defined(ADC_MULTIMODE_SUPPORT) |
| /* Check of parameters for configuration of ADC hierarchical scope: */ |
| /* multimode. */ |
| #if defined(ADC3) |
| #define IS_LL_ADC_MULTI_MODE(__MULTI_MODE__) \ |
| ( ((__MULTI_MODE__) == LL_ADC_MULTI_INDEPENDENT) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIMULT) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INTERL) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_SIMULT) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_ALTERN) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_SIM) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_REG_SIM_INJ_ALT) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_INJ_SIMULT) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_REG_SIMULT) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_REG_INTERL) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_TRIPLE_INJ_ALTERN) \ |
| ) |
| #else |
| #define IS_LL_ADC_MULTI_MODE(__MULTI_MODE__) \ |
| ( ((__MULTI_MODE__) == LL_ADC_MULTI_INDEPENDENT) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIMULT) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INTERL) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_SIMULT) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_INJ_ALTERN) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_SIM) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_SIM_INJ_ALT) \ |
| || ((__MULTI_MODE__) == LL_ADC_MULTI_DUAL_REG_INT_INJ_SIM) \ |
| ) |
| #endif |
| |
| #define IS_LL_ADC_MULTI_DMA_TRANSFER(__MULTI_DMA_TRANSFER__) \ |
| ( ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_EACH_ADC) \ |
| || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_LIMIT_1) \ |
| || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_LIMIT_2) \ |
| || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_LIMIT_3) \ |
| || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_UNLMT_1) \ |
| || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_UNLMT_2) \ |
| || ((__MULTI_DMA_TRANSFER__) == LL_ADC_MULTI_REG_DMA_UNLMT_3) \ |
| ) |
| |
| #define IS_LL_ADC_MULTI_TWOSMP_DELAY(__MULTI_TWOSMP_DELAY__) \ |
| ( ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES) \ |
| || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_6CYCLES) \ |
| || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_7CYCLES) \ |
| || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_8CYCLES) \ |
| || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_9CYCLES) \ |
| || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_10CYCLES) \ |
| || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_11CYCLES) \ |
| || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_12CYCLES) \ |
| || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_13CYCLES) \ |
| || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_14CYCLES) \ |
| || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_15CYCLES) \ |
| || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_16CYCLES) \ |
| || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_17CYCLES) \ |
| || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_18CYCLES) \ |
| || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_19CYCLES) \ |
| || ((__MULTI_TWOSMP_DELAY__) == LL_ADC_MULTI_TWOSMP_DELAY_20CYCLES) \ |
| ) |
| |
| #define IS_LL_ADC_MULTI_MASTER_SLAVE(__MULTI_MASTER_SLAVE__) \ |
| ( ((__MULTI_MASTER_SLAVE__) == LL_ADC_MULTI_MASTER) \ |
| || ((__MULTI_MASTER_SLAVE__) == LL_ADC_MULTI_SLAVE) \ |
| || ((__MULTI_MASTER_SLAVE__) == LL_ADC_MULTI_MASTER_SLAVE) \ |
| ) |
| |
| #endif /* ADC_MULTIMODE_SUPPORT */ |
| |
| #ifndef UNUSED |
| #define UNUSED(x) ((void)(x)) |
| #endif |
| |
| /** |
| * @} |
| */ |
| |
| |
| /* Private function prototypes -----------------------------------------------*/ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup ADC_LL_Exported_Functions |
| * @{ |
| */ |
| |
| /** @addtogroup ADC_LL_EF_Init |
| * @{ |
| */ |
| |
| /** |
| * @brief De-initialize registers of all ADC instances belonging to |
| * the same ADC common instance to their default reset values. |
| * @param ADCxy_COMMON ADC common instance |
| * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) |
| * @retval An ErrorStatus enumeration value: |
| * - SUCCESS: ADC common registers are de-initialized |
| * - ERROR: not applicable |
| */ |
| ErrorStatus LL_ADC_CommonDeInit(ADC_Common_TypeDef *ADCxy_COMMON) |
| { |
| /* Prevent unused argument(s) compilation warning */ |
| UNUSED(ADCxy_COMMON); |
| |
| /* Check the parameters */ |
| assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); |
| |
| /* Force reset of ADC clock (core clock) */ |
| LL_APB2_GRP1_ForceReset(LL_APB2_GRP1_PERIPH_ADC); |
| |
| /* Release reset of ADC clock (core clock) */ |
| LL_APB2_GRP1_ReleaseReset(LL_APB2_GRP1_PERIPH_ADC); |
| |
| return SUCCESS; |
| } |
| |
| /** |
| * @brief Initialize some features of ADC common parameters |
| * (all ADC instances belonging to the same ADC common instance) |
| * and multimode (for devices with several ADC instances available). |
| * @note The setting of ADC common parameters is conditioned to |
| * ADC instances state: |
| * All ADC instances belonging to the same ADC common instance |
| * must be disabled. |
| * @param ADCxy_COMMON ADC common instance |
| * (can be set directly from CMSIS definition or by using helper macro @ref __LL_ADC_COMMON_INSTANCE() ) |
| * @param ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure |
| * @retval An ErrorStatus enumeration value: |
| * - SUCCESS: ADC common registers are initialized |
| * - ERROR: ADC common registers are not initialized |
| */ |
| ErrorStatus LL_ADC_CommonInit(ADC_Common_TypeDef *ADCxy_COMMON, LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct) |
| { |
| ErrorStatus status = SUCCESS; |
| |
| /* Check the parameters */ |
| assert_param(IS_ADC_COMMON_INSTANCE(ADCxy_COMMON)); |
| assert_param(IS_LL_ADC_COMMON_CLOCK(ADC_CommonInitStruct->CommonClock)); |
| |
| #if defined(ADC_MULTIMODE_SUPPORT) |
| assert_param(IS_LL_ADC_MULTI_MODE(ADC_CommonInitStruct->Multimode)); |
| if(ADC_CommonInitStruct->Multimode != LL_ADC_MULTI_INDEPENDENT) |
| { |
| assert_param(IS_LL_ADC_MULTI_DMA_TRANSFER(ADC_CommonInitStruct->MultiDMATransfer)); |
| assert_param(IS_LL_ADC_MULTI_TWOSMP_DELAY(ADC_CommonInitStruct->MultiTwoSamplingDelay)); |
| } |
| #endif /* ADC_MULTIMODE_SUPPORT */ |
| |
| /* Note: Hardware constraint (refer to description of functions */ |
| /* "LL_ADC_SetCommonXXX()" and "LL_ADC_SetMultiXXX()"): */ |
| /* On this STM32 series, setting of these features is conditioned to */ |
| /* ADC state: */ |
| /* All ADC instances of the ADC common group must be disabled. */ |
| if(__LL_ADC_IS_ENABLED_ALL_COMMON_INSTANCE(ADCxy_COMMON) == 0U) |
| { |
| /* Configuration of ADC hierarchical scope: */ |
| /* - common to several ADC */ |
| /* (all ADC instances belonging to the same ADC common instance) */ |
| /* - Set ADC clock (conversion clock) */ |
| /* - multimode (if several ADC instances available on the */ |
| /* selected device) */ |
| /* - Set ADC multimode configuration */ |
| /* - Set ADC multimode DMA transfer */ |
| /* - Set ADC multimode: delay between 2 sampling phases */ |
| #if defined(ADC_MULTIMODE_SUPPORT) |
| if(ADC_CommonInitStruct->Multimode != LL_ADC_MULTI_INDEPENDENT) |
| { |
| MODIFY_REG(ADCxy_COMMON->CCR, |
| ADC_CCR_ADCPRE |
| | ADC_CCR_MULTI |
| | ADC_CCR_DMA |
| | ADC_CCR_DDS |
| | ADC_CCR_DELAY |
| , |
| ADC_CommonInitStruct->CommonClock |
| | ADC_CommonInitStruct->Multimode |
| | ADC_CommonInitStruct->MultiDMATransfer |
| | ADC_CommonInitStruct->MultiTwoSamplingDelay |
| ); |
| } |
| else |
| { |
| MODIFY_REG(ADCxy_COMMON->CCR, |
| ADC_CCR_ADCPRE |
| | ADC_CCR_MULTI |
| | ADC_CCR_DMA |
| | ADC_CCR_DDS |
| | ADC_CCR_DELAY |
| , |
| ADC_CommonInitStruct->CommonClock |
| | LL_ADC_MULTI_INDEPENDENT |
| ); |
| } |
| #else |
| LL_ADC_SetCommonClock(ADCxy_COMMON, ADC_CommonInitStruct->CommonClock); |
| #endif |
| } |
| else |
| { |
| /* Initialization error: One or several ADC instances belonging to */ |
| /* the same ADC common instance are not disabled. */ |
| status = ERROR; |
| } |
| |
| return status; |
| } |
| |
| /** |
| * @brief Set each @ref LL_ADC_CommonInitTypeDef field to default value. |
| * @param ADC_CommonInitStruct Pointer to a @ref LL_ADC_CommonInitTypeDef structure |
| * whose fields will be set to default values. |
| * @retval None |
| */ |
| void LL_ADC_CommonStructInit(LL_ADC_CommonInitTypeDef *ADC_CommonInitStruct) |
| { |
| /* Set ADC_CommonInitStruct fields to default values */ |
| /* Set fields of ADC common */ |
| /* (all ADC instances belonging to the same ADC common instance) */ |
| ADC_CommonInitStruct->CommonClock = LL_ADC_CLOCK_SYNC_PCLK_DIV2; |
| |
| #if defined(ADC_MULTIMODE_SUPPORT) |
| /* Set fields of ADC multimode */ |
| ADC_CommonInitStruct->Multimode = LL_ADC_MULTI_INDEPENDENT; |
| ADC_CommonInitStruct->MultiDMATransfer = LL_ADC_MULTI_REG_DMA_EACH_ADC; |
| ADC_CommonInitStruct->MultiTwoSamplingDelay = LL_ADC_MULTI_TWOSMP_DELAY_5CYCLES; |
| #endif /* ADC_MULTIMODE_SUPPORT */ |
| } |
| |
| /** |
| * @brief De-initialize registers of the selected ADC instance |
| * to their default reset values. |
| * @note To reset all ADC instances quickly (perform a hard reset), |
| * use function @ref LL_ADC_CommonDeInit(). |
| * @param ADCx ADC instance |
| * @retval An ErrorStatus enumeration value: |
| * - SUCCESS: ADC registers are de-initialized |
| * - ERROR: ADC registers are not de-initialized |
| */ |
| ErrorStatus LL_ADC_DeInit(ADC_TypeDef *ADCx) |
| { |
| ErrorStatus status = SUCCESS; |
| |
| /* Check the parameters */ |
| assert_param(IS_ADC_ALL_INSTANCE(ADCx)); |
| |
| /* Disable ADC instance if not already disabled. */ |
| if(LL_ADC_IsEnabled(ADCx) == 1U) |
| { |
| /* Set ADC group regular trigger source to SW start to ensure to not */ |
| /* have an external trigger event occurring during the conversion stop */ |
| /* ADC disable process. */ |
| LL_ADC_REG_SetTriggerSource(ADCx, LL_ADC_REG_TRIG_SOFTWARE); |
| |
| /* Set ADC group injected trigger source to SW start to ensure to not */ |
| /* have an external trigger event occurring during the conversion stop */ |
| /* ADC disable process. */ |
| LL_ADC_INJ_SetTriggerSource(ADCx, LL_ADC_INJ_TRIG_SOFTWARE); |
| |
| /* Disable the ADC instance */ |
| LL_ADC_Disable(ADCx); |
| } |
| |
| /* Check whether ADC state is compliant with expected state */ |
| /* (hardware requirements of bits state to reset registers below) */ |
| if(READ_BIT(ADCx->CR2, ADC_CR2_ADON) == 0U) |
| { |
| /* ========== Reset ADC registers ========== */ |
| /* Reset register SR */ |
| CLEAR_BIT(ADCx->SR, |
| ( LL_ADC_FLAG_STRT |
| | LL_ADC_FLAG_JSTRT |
| | LL_ADC_FLAG_EOCS |
| | LL_ADC_FLAG_OVR |
| | LL_ADC_FLAG_JEOS |
| | LL_ADC_FLAG_AWD1 ) |
| ); |
| |
| /* Reset register CR1 */ |
| CLEAR_BIT(ADCx->CR1, |
| ( ADC_CR1_OVRIE | ADC_CR1_RES | ADC_CR1_AWDEN |
| | ADC_CR1_JAWDEN |
| | ADC_CR1_DISCNUM | ADC_CR1_JDISCEN | ADC_CR1_DISCEN |
| | ADC_CR1_JAUTO | ADC_CR1_AWDSGL | ADC_CR1_SCAN |
| | ADC_CR1_JEOCIE | ADC_CR1_AWDIE | ADC_CR1_EOCIE |
| | ADC_CR1_AWDCH ) |
| ); |
| |
| /* Reset register CR2 */ |
| CLEAR_BIT(ADCx->CR2, |
| ( ADC_CR2_SWSTART | ADC_CR2_EXTEN | ADC_CR2_EXTSEL |
| | ADC_CR2_JSWSTART | ADC_CR2_JEXTEN | ADC_CR2_JEXTSEL |
| | ADC_CR2_ALIGN | ADC_CR2_EOCS |
| | ADC_CR2_DDS | ADC_CR2_DMA |
| | ADC_CR2_CONT | ADC_CR2_ADON ) |
| ); |
| |
| /* Reset register SMPR1 */ |
| CLEAR_BIT(ADCx->SMPR1, |
| ( ADC_SMPR1_SMP18 | ADC_SMPR1_SMP17 | ADC_SMPR1_SMP16 |
| | ADC_SMPR1_SMP15 | ADC_SMPR1_SMP14 | ADC_SMPR1_SMP13 |
| | ADC_SMPR1_SMP12 | ADC_SMPR1_SMP11 | ADC_SMPR1_SMP10) |
| ); |
| |
| /* Reset register SMPR2 */ |
| CLEAR_BIT(ADCx->SMPR2, |
| ( ADC_SMPR2_SMP9 |
| | ADC_SMPR2_SMP8 | ADC_SMPR2_SMP7 | ADC_SMPR2_SMP6 |
| | ADC_SMPR2_SMP5 | ADC_SMPR2_SMP4 | ADC_SMPR2_SMP3 |
| | ADC_SMPR2_SMP2 | ADC_SMPR2_SMP1 | ADC_SMPR2_SMP0) |
| ); |
| |
| /* Reset register JOFR1 */ |
| CLEAR_BIT(ADCx->JOFR1, ADC_JOFR1_JOFFSET1); |
| /* Reset register JOFR2 */ |
| CLEAR_BIT(ADCx->JOFR2, ADC_JOFR2_JOFFSET2); |
| /* Reset register JOFR3 */ |
| CLEAR_BIT(ADCx->JOFR3, ADC_JOFR3_JOFFSET3); |
| /* Reset register JOFR4 */ |
| CLEAR_BIT(ADCx->JOFR4, ADC_JOFR4_JOFFSET4); |
| |
| /* Reset register HTR */ |
| SET_BIT(ADCx->HTR, ADC_HTR_HT); |
| /* Reset register LTR */ |
| CLEAR_BIT(ADCx->LTR, ADC_LTR_LT); |
| |
| /* Reset register SQR1 */ |
| CLEAR_BIT(ADCx->SQR1, |
| ( ADC_SQR1_L |
| | ADC_SQR1_SQ16 |
| | ADC_SQR1_SQ15 | ADC_SQR1_SQ14 | ADC_SQR1_SQ13) |
| ); |
| |
| /* Reset register SQR2 */ |
| CLEAR_BIT(ADCx->SQR2, |
| ( ADC_SQR2_SQ12 | ADC_SQR2_SQ11 | ADC_SQR2_SQ10 |
| | ADC_SQR2_SQ9 | ADC_SQR2_SQ8 | ADC_SQR2_SQ7) |
| ); |
| |
| /* Reset register SQR3 */ |
| CLEAR_BIT(ADCx->SQR3, |
| ( ADC_SQR3_SQ6 | ADC_SQR3_SQ5 | ADC_SQR3_SQ4 |
| | ADC_SQR3_SQ3 | ADC_SQR3_SQ2 | ADC_SQR3_SQ1) |
| ); |
| |
| /* Reset register JSQR */ |
| CLEAR_BIT(ADCx->JSQR, |
| ( ADC_JSQR_JL |
| | ADC_JSQR_JSQ4 | ADC_JSQR_JSQ3 |
| | ADC_JSQR_JSQ2 | ADC_JSQR_JSQ1 ) |
| ); |
| |
| /* Reset register DR */ |
| /* bits in access mode read only, no direct reset applicable */ |
| |
| /* Reset registers JDR1, JDR2, JDR3, JDR4 */ |
| /* bits in access mode read only, no direct reset applicable */ |
| |
| /* Reset register CCR */ |
| CLEAR_BIT(ADC->CCR, ADC_CCR_TSVREFE | ADC_CCR_ADCPRE); |
| } |
| |
| return status; |
| } |
| |
| /** |
| * @brief Initialize some features of ADC instance. |
| * @note These parameters have an impact on ADC scope: ADC instance. |
| * Affects both group regular and group injected (availability |
| * of ADC group injected depends on STM32 families). |
| * Refer to corresponding unitary functions into |
| * @ref ADC_LL_EF_Configuration_ADC_Instance . |
| * @note The setting of these parameters by function @ref LL_ADC_Init() |
| * is conditioned to ADC state: |
| * ADC instance must be disabled. |
| * This condition is applied to all ADC features, for efficiency |
| * and compatibility over all STM32 families. However, the different |
| * features can be set under different ADC state conditions |
| * (setting possible with ADC enabled without conversion on going, |
| * ADC enabled with conversion on going, ...) |
| * Each feature can be updated afterwards with a unitary function |
| * and potentially with ADC in a different state than disabled, |
| * refer to description of each function for setting |
| * conditioned to ADC state. |
| * @note After using this function, some other features must be configured |
| * using LL unitary functions. |
| * The minimum configuration remaining to be done is: |
| * - Set ADC group regular or group injected sequencer: |
| * map channel on the selected sequencer rank. |
| * Refer to function @ref LL_ADC_REG_SetSequencerRanks(). |
| * - Set ADC channel sampling time |
| * Refer to function LL_ADC_SetChannelSamplingTime(); |
| * @param ADCx ADC instance |
| * @param ADC_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure |
| * @retval An ErrorStatus enumeration value: |
| * - SUCCESS: ADC registers are initialized |
| * - ERROR: ADC registers are not initialized |
| */ |
| ErrorStatus LL_ADC_Init(ADC_TypeDef *ADCx, LL_ADC_InitTypeDef *ADC_InitStruct) |
| { |
| ErrorStatus status = SUCCESS; |
| |
| /* Check the parameters */ |
| assert_param(IS_ADC_ALL_INSTANCE(ADCx)); |
| |
| assert_param(IS_LL_ADC_RESOLUTION(ADC_InitStruct->Resolution)); |
| assert_param(IS_LL_ADC_DATA_ALIGN(ADC_InitStruct->DataAlignment)); |
| assert_param(IS_LL_ADC_SCAN_SELECTION(ADC_InitStruct->SequencersScanMode)); |
| |
| /* Note: Hardware constraint (refer to description of this function): */ |
| /* ADC instance must be disabled. */ |
| if(LL_ADC_IsEnabled(ADCx) == 0U) |
| { |
| /* Configuration of ADC hierarchical scope: */ |
| /* - ADC instance */ |
| /* - Set ADC data resolution */ |
| /* - Set ADC conversion data alignment */ |
| MODIFY_REG(ADCx->CR1, |
| ADC_CR1_RES |
| | ADC_CR1_SCAN |
| , |
| ADC_InitStruct->Resolution |
| | ADC_InitStruct->SequencersScanMode |
| ); |
| |
| MODIFY_REG(ADCx->CR2, |
| ADC_CR2_ALIGN |
| , |
| ADC_InitStruct->DataAlignment |
| ); |
| |
| } |
| else |
| { |
| /* Initialization error: ADC instance is not disabled. */ |
| status = ERROR; |
| } |
| return status; |
| } |
| |
| /** |
| * @brief Set each @ref LL_ADC_InitTypeDef field to default value. |
| * @param ADC_InitStruct Pointer to a @ref LL_ADC_InitTypeDef structure |
| * whose fields will be set to default values. |
| * @retval None |
| */ |
| void LL_ADC_StructInit(LL_ADC_InitTypeDef *ADC_InitStruct) |
| { |
| /* Set ADC_InitStruct fields to default values */ |
| /* Set fields of ADC instance */ |
| ADC_InitStruct->Resolution = LL_ADC_RESOLUTION_12B; |
| ADC_InitStruct->DataAlignment = LL_ADC_DATA_ALIGN_RIGHT; |
| |
| /* Enable scan mode to have a generic behavior with ADC of other */ |
| /* STM32 families, without this setting available: */ |
| /* ADC group regular sequencer and ADC group injected sequencer depend */ |
| /* only of their own configuration. */ |
| ADC_InitStruct->SequencersScanMode = LL_ADC_SEQ_SCAN_ENABLE; |
| |
| } |
| |
| /** |
| * @brief Initialize some features of ADC group regular. |
| * @note These parameters have an impact on ADC scope: ADC group regular. |
| * Refer to corresponding unitary functions into |
| * @ref ADC_LL_EF_Configuration_ADC_Group_Regular |
| * (functions with prefix "REG"). |
| * @note The setting of these parameters by function @ref LL_ADC_Init() |
| * is conditioned to ADC state: |
| * ADC instance must be disabled. |
| * This condition is applied to all ADC features, for efficiency |
| * and compatibility over all STM32 families. However, the different |
| * features can be set under different ADC state conditions |
| * (setting possible with ADC enabled without conversion on going, |
| * ADC enabled with conversion on going, ...) |
| * Each feature can be updated afterwards with a unitary function |
| * and potentially with ADC in a different state than disabled, |
| * refer to description of each function for setting |
| * conditioned to ADC state. |
| * @note After using this function, other features must be configured |
| * using LL unitary functions. |
| * The minimum configuration remaining to be done is: |
| * - Set ADC group regular or group injected sequencer: |
| * map channel on the selected sequencer rank. |
| * Refer to function @ref LL_ADC_REG_SetSequencerRanks(). |
| * - Set ADC channel sampling time |
| * Refer to function LL_ADC_SetChannelSamplingTime(); |
| * @param ADCx ADC instance |
| * @param ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure |
| * @retval An ErrorStatus enumeration value: |
| * - SUCCESS: ADC registers are initialized |
| * - ERROR: ADC registers are not initialized |
| */ |
| ErrorStatus LL_ADC_REG_Init(ADC_TypeDef *ADCx, LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct) |
| { |
| ErrorStatus status = SUCCESS; |
| |
| /* Check the parameters */ |
| assert_param(IS_ADC_ALL_INSTANCE(ADCx)); |
| assert_param(IS_LL_ADC_REG_TRIG_SOURCE(ADC_REG_InitStruct->TriggerSource)); |
| assert_param(IS_LL_ADC_REG_SEQ_SCAN_LENGTH(ADC_REG_InitStruct->SequencerLength)); |
| if(ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) |
| { |
| assert_param(IS_LL_ADC_REG_SEQ_SCAN_DISCONT_MODE(ADC_REG_InitStruct->SequencerDiscont)); |
| } |
| assert_param(IS_LL_ADC_REG_CONTINUOUS_MODE(ADC_REG_InitStruct->ContinuousMode)); |
| assert_param(IS_LL_ADC_REG_DMA_TRANSFER(ADC_REG_InitStruct->DMATransfer)); |
| |
| /* ADC group regular continuous mode and discontinuous mode */ |
| /* can not be enabled simultenaeously */ |
| assert_param((ADC_REG_InitStruct->ContinuousMode == LL_ADC_REG_CONV_SINGLE) |
| || (ADC_REG_InitStruct->SequencerDiscont == LL_ADC_REG_SEQ_DISCONT_DISABLE)); |
| |
| /* Note: Hardware constraint (refer to description of this function): */ |
| /* ADC instance must be disabled. */ |
| if(LL_ADC_IsEnabled(ADCx) == 0U) |
| { |
| /* Configuration of ADC hierarchical scope: */ |
| /* - ADC group regular */ |
| /* - Set ADC group regular trigger source */ |
| /* - Set ADC group regular sequencer length */ |
| /* - Set ADC group regular sequencer discontinuous mode */ |
| /* - Set ADC group regular continuous mode */ |
| /* - Set ADC group regular conversion data transfer: no transfer or */ |
| /* transfer by DMA, and DMA requests mode */ |
| /* Note: On this STM32 series, ADC trigger edge is set when starting */ |
| /* ADC conversion. */ |
| /* Refer to function @ref LL_ADC_REG_StartConversionExtTrig(). */ |
| if(ADC_REG_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) |
| { |
| MODIFY_REG(ADCx->CR1, |
| ADC_CR1_DISCEN |
| | ADC_CR1_DISCNUM |
| , |
| ADC_REG_InitStruct->SequencerLength |
| | ADC_REG_InitStruct->SequencerDiscont |
| ); |
| } |
| else |
| { |
| MODIFY_REG(ADCx->CR1, |
| ADC_CR1_DISCEN |
| | ADC_CR1_DISCNUM |
| , |
| ADC_REG_InitStruct->SequencerLength |
| | LL_ADC_REG_SEQ_DISCONT_DISABLE |
| ); |
| } |
| |
| MODIFY_REG(ADCx->CR2, |
| ADC_CR2_EXTSEL |
| | ADC_CR2_EXTEN |
| | ADC_CR2_CONT |
| | ADC_CR2_DMA |
| | ADC_CR2_DDS |
| , |
| (ADC_REG_InitStruct->TriggerSource & ADC_CR2_EXTSEL) |
| | ADC_REG_InitStruct->ContinuousMode |
| | ADC_REG_InitStruct->DMATransfer |
| ); |
| |
| /* Set ADC group regular sequencer length and scan direction */ |
| /* Note: Hardware constraint (refer to description of this function): */ |
| /* Note: If ADC instance feature scan mode is disabled */ |
| /* (refer to ADC instance initialization structure */ |
| /* parameter @ref SequencersScanMode */ |
| /* or function @ref LL_ADC_SetSequencersScanMode() ), */ |
| /* this parameter is discarded. */ |
| LL_ADC_REG_SetSequencerLength(ADCx, ADC_REG_InitStruct->SequencerLength); |
| } |
| else |
| { |
| /* Initialization error: ADC instance is not disabled. */ |
| status = ERROR; |
| } |
| return status; |
| } |
| |
| /** |
| * @brief Set each @ref LL_ADC_REG_InitTypeDef field to default value. |
| * @param ADC_REG_InitStruct Pointer to a @ref LL_ADC_REG_InitTypeDef structure |
| * whose fields will be set to default values. |
| * @retval None |
| */ |
| void LL_ADC_REG_StructInit(LL_ADC_REG_InitTypeDef *ADC_REG_InitStruct) |
| { |
| /* Set ADC_REG_InitStruct fields to default values */ |
| /* Set fields of ADC group regular */ |
| /* Note: On this STM32 series, ADC trigger edge is set when starting */ |
| /* ADC conversion. */ |
| /* Refer to function @ref LL_ADC_REG_StartConversionExtTrig(). */ |
| ADC_REG_InitStruct->TriggerSource = LL_ADC_REG_TRIG_SOFTWARE; |
| ADC_REG_InitStruct->SequencerLength = LL_ADC_REG_SEQ_SCAN_DISABLE; |
| ADC_REG_InitStruct->SequencerDiscont = LL_ADC_REG_SEQ_DISCONT_DISABLE; |
| ADC_REG_InitStruct->ContinuousMode = LL_ADC_REG_CONV_SINGLE; |
| ADC_REG_InitStruct->DMATransfer = LL_ADC_REG_DMA_TRANSFER_NONE; |
| } |
| |
| /** |
| * @brief Initialize some features of ADC group injected. |
| * @note These parameters have an impact on ADC scope: ADC group injected. |
| * Refer to corresponding unitary functions into |
| * @ref ADC_LL_EF_Configuration_ADC_Group_Regular |
| * (functions with prefix "INJ"). |
| * @note The setting of these parameters by function @ref LL_ADC_Init() |
| * is conditioned to ADC state: |
| * ADC instance must be disabled. |
| * This condition is applied to all ADC features, for efficiency |
| * and compatibility over all STM32 families. However, the different |
| * features can be set under different ADC state conditions |
| * (setting possible with ADC enabled without conversion on going, |
| * ADC enabled with conversion on going, ...) |
| * Each feature can be updated afterwards with a unitary function |
| * and potentially with ADC in a different state than disabled, |
| * refer to description of each function for setting |
| * conditioned to ADC state. |
| * @note After using this function, other features must be configured |
| * using LL unitary functions. |
| * The minimum configuration remaining to be done is: |
| * - Set ADC group injected sequencer: |
| * map channel on the selected sequencer rank. |
| * Refer to function @ref LL_ADC_INJ_SetSequencerRanks(). |
| * - Set ADC channel sampling time |
| * Refer to function LL_ADC_SetChannelSamplingTime(); |
| * @param ADCx ADC instance |
| * @param ADC_INJ_InitStruct Pointer to a @ref LL_ADC_INJ_InitTypeDef structure |
| * @retval An ErrorStatus enumeration value: |
| * - SUCCESS: ADC registers are initialized |
| * - ERROR: ADC registers are not initialized |
| */ |
| ErrorStatus LL_ADC_INJ_Init(ADC_TypeDef *ADCx, LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct) |
| { |
| ErrorStatus status = SUCCESS; |
| |
| /* Check the parameters */ |
| assert_param(IS_ADC_ALL_INSTANCE(ADCx)); |
| assert_param(IS_LL_ADC_INJ_TRIG_SOURCE(ADC_INJ_InitStruct->TriggerSource)); |
| assert_param(IS_LL_ADC_INJ_SEQ_SCAN_LENGTH(ADC_INJ_InitStruct->SequencerLength)); |
| if(ADC_INJ_InitStruct->SequencerLength != LL_ADC_INJ_SEQ_SCAN_DISABLE) |
| { |
| assert_param(IS_LL_ADC_INJ_SEQ_SCAN_DISCONT_MODE(ADC_INJ_InitStruct->SequencerDiscont)); |
| } |
| assert_param(IS_LL_ADC_INJ_TRIG_AUTO(ADC_INJ_InitStruct->TrigAuto)); |
| |
| /* Note: Hardware constraint (refer to description of this function): */ |
| /* ADC instance must be disabled. */ |
| if(LL_ADC_IsEnabled(ADCx) == 0U) |
| { |
| /* Configuration of ADC hierarchical scope: */ |
| /* - ADC group injected */ |
| /* - Set ADC group injected trigger source */ |
| /* - Set ADC group injected sequencer length */ |
| /* - Set ADC group injected sequencer discontinuous mode */ |
| /* - Set ADC group injected conversion trigger: independent or */ |
| /* from ADC group regular */ |
| /* Note: On this STM32 series, ADC trigger edge is set when starting */ |
| /* ADC conversion. */ |
| /* Refer to function @ref LL_ADC_INJ_StartConversionExtTrig(). */ |
| if(ADC_INJ_InitStruct->SequencerLength != LL_ADC_REG_SEQ_SCAN_DISABLE) |
| { |
| MODIFY_REG(ADCx->CR1, |
| ADC_CR1_JDISCEN |
| | ADC_CR1_JAUTO |
| , |
| ADC_INJ_InitStruct->SequencerDiscont |
| | ADC_INJ_InitStruct->TrigAuto |
| ); |
| } |
| else |
| { |
| MODIFY_REG(ADCx->CR1, |
| ADC_CR1_JDISCEN |
| | ADC_CR1_JAUTO |
| , |
| LL_ADC_REG_SEQ_DISCONT_DISABLE |
| | ADC_INJ_InitStruct->TrigAuto |
| ); |
| } |
| |
| MODIFY_REG(ADCx->CR2, |
| ADC_CR2_JEXTSEL |
| | ADC_CR2_JEXTEN |
| , |
| (ADC_INJ_InitStruct->TriggerSource & ADC_CR2_JEXTSEL) |
| ); |
| |
| /* Note: Hardware constraint (refer to description of this function): */ |
| /* Note: If ADC instance feature scan mode is disabled */ |
| /* (refer to ADC instance initialization structure */ |
| /* parameter @ref SequencersScanMode */ |
| /* or function @ref LL_ADC_SetSequencersScanMode() ), */ |
| /* this parameter is discarded. */ |
| LL_ADC_INJ_SetSequencerLength(ADCx, ADC_INJ_InitStruct->SequencerLength); |
| } |
| else |
| { |
| /* Initialization error: ADC instance is not disabled. */ |
| status = ERROR; |
| } |
| return status; |
| } |
| |
| /** |
| * @brief Set each @ref LL_ADC_INJ_InitTypeDef field to default value. |
| * @param ADC_INJ_InitStruct Pointer to a @ref LL_ADC_INJ_InitTypeDef structure |
| * whose fields will be set to default values. |
| * @retval None |
| */ |
| void LL_ADC_INJ_StructInit(LL_ADC_INJ_InitTypeDef *ADC_INJ_InitStruct) |
| { |
| /* Set ADC_INJ_InitStruct fields to default values */ |
| /* Set fields of ADC group injected */ |
| ADC_INJ_InitStruct->TriggerSource = LL_ADC_INJ_TRIG_SOFTWARE; |
| ADC_INJ_InitStruct->SequencerLength = LL_ADC_INJ_SEQ_SCAN_DISABLE; |
| ADC_INJ_InitStruct->SequencerDiscont = LL_ADC_INJ_SEQ_DISCONT_DISABLE; |
| ADC_INJ_InitStruct->TrigAuto = LL_ADC_INJ_TRIG_INDEPENDENT; |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* ADC1 || ADC2 || ADC3 */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* USE_FULL_LL_DRIVER */ |
