| /** |
| ****************************************************************************** |
| * @file stm32f2xx_hal_tim_ex.h |
| * @author MCD Application Team |
| * @brief Header file of TIM HAL Extended module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2016 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32F2xx_HAL_TIM_EX_H |
| #define STM32F2xx_HAL_TIM_EX_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f2xx_hal_def.h" |
| |
| /** @addtogroup STM32F2xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup TIMEx |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup TIMEx_Exported_Types TIM Extended Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief TIM Hall sensor Configuration Structure definition |
| */ |
| |
| typedef struct |
| { |
| uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. |
| This parameter can be a value of @ref TIM_Input_Capture_Polarity */ |
| |
| uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. |
| This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ |
| |
| uint32_t IC1Filter; /*!< Specifies the input capture filter. |
| This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ |
| |
| uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. |
| This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ |
| } TIM_HallSensor_InitTypeDef; |
| /** |
| * @} |
| */ |
| /* End of exported types -----------------------------------------------------*/ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup TIMEx_Exported_Constants TIM Extended Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup TIMEx_Remap TIM Extended Remapping |
| * @{ |
| */ |
| #define TIM_TIM2_TIM8_TRGO 0x00000000U /*!< TIM2 ITR1 is connected to TIM8 TRGO */ |
| #define TIM_TIM2_ETH_PTP TIM_OR_ITR1_RMP_0 /*!< TIM2 ITR1 is connected to PTP trigger output */ |
| #define TIM_TIM2_USBFS_SOF TIM_OR_ITR1_RMP_1 /*!< TIM2 ITR1 is connected to OTG FS SOF */ |
| #define TIM_TIM2_USBHS_SOF (TIM_OR_ITR1_RMP_1 | TIM_OR_ITR1_RMP_0) /*!< TIM2 ITR1 is connected to OTG HS SOF */ |
| |
| #define TIM_TIM5_GPIO 0x00000000U /*!< TIM5 TI4 is connected to GPIO */ |
| #define TIM_TIM5_LSI TIM_OR_TI4_RMP_0 /*!< TIM5 TI4 is connected to LSI */ |
| #define TIM_TIM5_LSE TIM_OR_TI4_RMP_1 /*!< TIM5 TI4 is connected to LSE */ |
| #define TIM_TIM5_RTC (TIM_OR_TI4_RMP_1 | TIM_OR_TI4_RMP_0) /*!< TIM5 TI4 is connected to the RTC wakeup interrupt */ |
| |
| #define TIM_TIM11_GPIO 0x00000000U /*!< TIM11 TI1 is connected to GPIO */ |
| #define TIM_TIM11_HSE TIM_OR_TI1_RMP_1 /*!< TIM11 TI1 is connected to HSE_RTC clock */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| /* End of exported constants -------------------------------------------------*/ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| /** @defgroup TIMEx_Exported_Macros TIM Extended Exported Macros |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| /* End of exported macro -----------------------------------------------------*/ |
| |
| /* Private macro -------------------------------------------------------------*/ |
| /** @defgroup TIMEx_Private_Macros TIM Extended Private Macros |
| * @{ |
| */ |
| #define IS_TIM_REMAP(INSTANCE, TIM_REMAP) \ |
| ((((INSTANCE) == TIM2) && (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO) || \ |
| ((TIM_REMAP) == TIM_TIM2_USBFS_SOF) || \ |
| ((TIM_REMAP) == TIM_TIM2_USBHS_SOF))) || \ |
| (((INSTANCE) == TIM5) && (((TIM_REMAP) == TIM_TIM5_GPIO) || \ |
| ((TIM_REMAP) == TIM_TIM5_LSI) || \ |
| ((TIM_REMAP) == TIM_TIM5_LSE) || \ |
| ((TIM_REMAP) == TIM_TIM5_RTC))) || \ |
| (((INSTANCE) == TIM11) && (((TIM_REMAP) == TIM_TIM11_GPIO) || \ |
| ((TIM_REMAP) == TIM_TIM11_HSE)))) |
| |
| /** |
| * @} |
| */ |
| /* End of private macro ------------------------------------------------------*/ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup TIMEx_Exported_Functions TIM Extended Exported Functions |
| * @{ |
| */ |
| |
| /** @addtogroup TIMEx_Exported_Functions_Group1 Extended Timer Hall Sensor functions |
| * @brief Timer Hall Sensor functions |
| * @{ |
| */ |
| /* Timer Hall Sensor functions **********************************************/ |
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef *sConfig); |
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim); |
| |
| void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim); |
| void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim); |
| |
| /* Blocking mode: Polling */ |
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim); |
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim); |
| /* Non-Blocking mode: Interrupt */ |
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim); |
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim); |
| /* Non-Blocking mode: DMA */ |
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); |
| HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup TIMEx_Exported_Functions_Group2 Extended Timer Complementary Output Compare functions |
| * @brief Timer Complementary Output Compare functions |
| * @{ |
| */ |
| /* Timer Complementary Output Compare functions *****************************/ |
| /* Blocking mode: Polling */ |
| HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); |
| |
| /* Non-Blocking mode: Interrupt */ |
| HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); |
| |
| /* Non-Blocking mode: DMA */ |
| HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); |
| HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup TIMEx_Exported_Functions_Group3 Extended Timer Complementary PWM functions |
| * @brief Timer Complementary PWM functions |
| * @{ |
| */ |
| /* Timer Complementary PWM functions ****************************************/ |
| /* Blocking mode: Polling */ |
| HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); |
| |
| /* Non-Blocking mode: Interrupt */ |
| HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /* Non-Blocking mode: DMA */ |
| HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); |
| HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup TIMEx_Exported_Functions_Group4 Extended Timer Complementary One Pulse functions |
| * @brief Timer Complementary One Pulse functions |
| * @{ |
| */ |
| /* Timer Complementary One Pulse functions **********************************/ |
| /* Blocking mode: Polling */ |
| HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); |
| HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); |
| |
| /* Non-Blocking mode: Interrupt */ |
| HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); |
| HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup TIMEx_Exported_Functions_Group5 Extended Peripheral Control functions |
| * @brief Peripheral Control functions |
| * @{ |
| */ |
| /* Extended Control functions ************************************************/ |
| HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, |
| uint32_t CommutationSource); |
| HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, |
| uint32_t CommutationSource); |
| HAL_StatusTypeDef HAL_TIMEx_ConfigCommutEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, |
| uint32_t CommutationSource); |
| HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, |
| TIM_MasterConfigTypeDef *sMasterConfig); |
| HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, |
| TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); |
| HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup TIMEx_Exported_Functions_Group6 Extended Callbacks functions |
| * @brief Extended Callbacks functions |
| * @{ |
| */ |
| /* Extended Callback **********************************************************/ |
| void HAL_TIMEx_CommutCallback(TIM_HandleTypeDef *htim); |
| void HAL_TIMEx_CommutHalfCpltCallback(TIM_HandleTypeDef *htim); |
| void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup TIMEx_Exported_Functions_Group7 Extended Peripheral State functions |
| * @brief Extended Peripheral State functions |
| * @{ |
| */ |
| /* Extended Peripheral State functions ***************************************/ |
| HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim); |
| HAL_TIM_ChannelStateTypeDef HAL_TIMEx_GetChannelNState(TIM_HandleTypeDef *htim, uint32_t ChannelN); |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| /* End of exported functions -------------------------------------------------*/ |
| |
| /* Private functions----------------------------------------------------------*/ |
| /** @addtogroup TIMEx_Private_Functions TIMEx Private Functions |
| * @{ |
| */ |
| void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); |
| void TIMEx_DMACommutationHalfCplt(DMA_HandleTypeDef *hdma); |
| /** |
| * @} |
| */ |
| /* End of private functions --------------------------------------------------*/ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| |
| #endif /* STM32F2xx_HAL_TIM_EX_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |