| /** |
| ****************************************************************************** |
| * @file stm32f2xx_hal_tim.h |
| * @author MCD Application Team |
| * @brief Header file of TIM HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2016 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32F2xx_HAL_TIM_H |
| #define STM32F2xx_HAL_TIM_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f2xx_hal_def.h" |
| |
| /** @addtogroup STM32F2xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup TIM |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup TIM_Exported_Types TIM Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief TIM Time base Configuration Structure definition |
| */ |
| typedef struct |
| { |
| uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. |
| This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ |
| |
| uint32_t CounterMode; /*!< Specifies the counter mode. |
| This parameter can be a value of @ref TIM_Counter_Mode */ |
| |
| uint32_t Period; /*!< Specifies the period value to be loaded into the active |
| Auto-Reload Register at the next update event. |
| This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ |
| |
| uint32_t ClockDivision; /*!< Specifies the clock division. |
| This parameter can be a value of @ref TIM_ClockDivision */ |
| |
| uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter |
| reaches zero, an update event is generated and counting restarts |
| from the RCR value (N). |
| This means in PWM mode that (N+1) corresponds to: |
| - the number of PWM periods in edge-aligned mode |
| - the number of half PWM period in center-aligned mode |
| GP timers: this parameter must be a number between Min_Data = 0x00 and |
| Max_Data = 0xFF. |
| Advanced timers: this parameter must be a number between Min_Data = 0x0000 and |
| Max_Data = 0xFFFF. */ |
| |
| uint32_t AutoReloadPreload; /*!< Specifies the auto-reload preload. |
| This parameter can be a value of @ref TIM_AutoReloadPreload */ |
| } TIM_Base_InitTypeDef; |
| |
| /** |
| * @brief TIM Output Compare Configuration Structure definition |
| */ |
| typedef struct |
| { |
| uint32_t OCMode; /*!< Specifies the TIM mode. |
| This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ |
| |
| uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. |
| This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ |
| |
| uint32_t OCPolarity; /*!< Specifies the output polarity. |
| This parameter can be a value of @ref TIM_Output_Compare_Polarity */ |
| |
| uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. |
| This parameter can be a value of @ref TIM_Output_Compare_N_Polarity |
| @note This parameter is valid only for timer instances supporting break feature. */ |
| |
| uint32_t OCFastMode; /*!< Specifies the Fast mode state. |
| This parameter can be a value of @ref TIM_Output_Fast_State |
| @note This parameter is valid only in PWM1 and PWM2 mode. */ |
| |
| |
| uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. |
| This parameter can be a value of @ref TIM_Output_Compare_Idle_State |
| @note This parameter is valid only for timer instances supporting break feature. */ |
| |
| uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. |
| This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State |
| @note This parameter is valid only for timer instances supporting break feature. */ |
| } TIM_OC_InitTypeDef; |
| |
| /** |
| * @brief TIM One Pulse Mode Configuration Structure definition |
| */ |
| typedef struct |
| { |
| uint32_t OCMode; /*!< Specifies the TIM mode. |
| This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ |
| |
| uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. |
| This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ |
| |
| uint32_t OCPolarity; /*!< Specifies the output polarity. |
| This parameter can be a value of @ref TIM_Output_Compare_Polarity */ |
| |
| uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. |
| This parameter can be a value of @ref TIM_Output_Compare_N_Polarity |
| @note This parameter is valid only for timer instances supporting break feature. */ |
| |
| uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. |
| This parameter can be a value of @ref TIM_Output_Compare_Idle_State |
| @note This parameter is valid only for timer instances supporting break feature. */ |
| |
| uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. |
| This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State |
| @note This parameter is valid only for timer instances supporting break feature. */ |
| |
| uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. |
| This parameter can be a value of @ref TIM_Input_Capture_Polarity */ |
| |
| uint32_t ICSelection; /*!< Specifies the input. |
| This parameter can be a value of @ref TIM_Input_Capture_Selection */ |
| |
| uint32_t ICFilter; /*!< Specifies the input capture filter. |
| This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ |
| } TIM_OnePulse_InitTypeDef; |
| |
| /** |
| * @brief TIM Input Capture Configuration Structure definition |
| */ |
| typedef struct |
| { |
| uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. |
| This parameter can be a value of @ref TIM_Input_Capture_Polarity */ |
| |
| uint32_t ICSelection; /*!< Specifies the input. |
| This parameter can be a value of @ref TIM_Input_Capture_Selection */ |
| |
| uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. |
| This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ |
| |
| uint32_t ICFilter; /*!< Specifies the input capture filter. |
| This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ |
| } TIM_IC_InitTypeDef; |
| |
| /** |
| * @brief TIM Encoder Configuration Structure definition |
| */ |
| typedef struct |
| { |
| uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. |
| This parameter can be a value of @ref TIM_Encoder_Mode */ |
| |
| uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. |
| This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ |
| |
| uint32_t IC1Selection; /*!< Specifies the input. |
| This parameter can be a value of @ref TIM_Input_Capture_Selection */ |
| |
| uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. |
| This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ |
| |
| uint32_t IC1Filter; /*!< Specifies the input capture filter. |
| This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ |
| |
| uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. |
| This parameter can be a value of @ref TIM_Encoder_Input_Polarity */ |
| |
| uint32_t IC2Selection; /*!< Specifies the input. |
| This parameter can be a value of @ref TIM_Input_Capture_Selection */ |
| |
| uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. |
| This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ |
| |
| uint32_t IC2Filter; /*!< Specifies the input capture filter. |
| This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ |
| } TIM_Encoder_InitTypeDef; |
| |
| /** |
| * @brief Clock Configuration Handle Structure definition |
| */ |
| typedef struct |
| { |
| uint32_t ClockSource; /*!< TIM clock sources |
| This parameter can be a value of @ref TIM_Clock_Source */ |
| uint32_t ClockPolarity; /*!< TIM clock polarity |
| This parameter can be a value of @ref TIM_Clock_Polarity */ |
| uint32_t ClockPrescaler; /*!< TIM clock prescaler |
| This parameter can be a value of @ref TIM_Clock_Prescaler */ |
| uint32_t ClockFilter; /*!< TIM clock filter |
| This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ |
| } TIM_ClockConfigTypeDef; |
| |
| /** |
| * @brief TIM Clear Input Configuration Handle Structure definition |
| */ |
| typedef struct |
| { |
| uint32_t ClearInputState; /*!< TIM clear Input state |
| This parameter can be ENABLE or DISABLE */ |
| uint32_t ClearInputSource; /*!< TIM clear Input sources |
| This parameter can be a value of @ref TIM_ClearInput_Source */ |
| uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity |
| This parameter can be a value of @ref TIM_ClearInput_Polarity */ |
| uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler |
| This parameter must be 0: When OCRef clear feature is used with ETR source, |
| ETR prescaler must be off */ |
| uint32_t ClearInputFilter; /*!< TIM Clear Input filter |
| This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ |
| } TIM_ClearInputConfigTypeDef; |
| |
| /** |
| * @brief TIM Master configuration Structure definition |
| */ |
| typedef struct |
| { |
| uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection |
| This parameter can be a value of @ref TIM_Master_Mode_Selection */ |
| uint32_t MasterSlaveMode; /*!< Master/slave mode selection |
| This parameter can be a value of @ref TIM_Master_Slave_Mode |
| @note When the Master/slave mode is enabled, the effect of |
| an event on the trigger input (TRGI) is delayed to allow a |
| perfect synchronization between the current timer and its |
| slaves (through TRGO). It is not mandatory in case of timer |
| synchronization mode. */ |
| } TIM_MasterConfigTypeDef; |
| |
| /** |
| * @brief TIM Slave configuration Structure definition |
| */ |
| typedef struct |
| { |
| uint32_t SlaveMode; /*!< Slave mode selection |
| This parameter can be a value of @ref TIM_Slave_Mode */ |
| uint32_t InputTrigger; /*!< Input Trigger source |
| This parameter can be a value of @ref TIM_Trigger_Selection */ |
| uint32_t TriggerPolarity; /*!< Input Trigger polarity |
| This parameter can be a value of @ref TIM_Trigger_Polarity */ |
| uint32_t TriggerPrescaler; /*!< Input trigger prescaler |
| This parameter can be a value of @ref TIM_Trigger_Prescaler */ |
| uint32_t TriggerFilter; /*!< Input trigger filter |
| This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ |
| |
| } TIM_SlaveConfigTypeDef; |
| |
| /** |
| * @brief TIM Break input(s) and Dead time configuration Structure definition |
| * @note 2 break inputs can be configured (BKIN and BKIN2) with configurable |
| * filter and polarity. |
| */ |
| typedef struct |
| { |
| uint32_t OffStateRunMode; /*!< TIM off state in run mode, This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ |
| |
| uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode, This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ |
| |
| uint32_t LockLevel; /*!< TIM Lock level, This parameter can be a value of @ref TIM_Lock_level */ |
| |
| uint32_t DeadTime; /*!< TIM dead Time, This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ |
| |
| uint32_t BreakState; /*!< TIM Break State, This parameter can be a value of @ref TIM_Break_Input_enable_disable */ |
| |
| uint32_t BreakPolarity; /*!< TIM Break input polarity, This parameter can be a value of @ref TIM_Break_Polarity */ |
| |
| uint32_t BreakFilter; /*!< Specifies the break input filter.This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ |
| |
| uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state, This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ |
| |
| } TIM_BreakDeadTimeConfigTypeDef; |
| |
| /** |
| * @brief HAL State structures definition |
| */ |
| typedef enum |
| { |
| HAL_TIM_STATE_RESET = 0x00U, /*!< Peripheral not yet initialized or disabled */ |
| HAL_TIM_STATE_READY = 0x01U, /*!< Peripheral Initialized and ready for use */ |
| HAL_TIM_STATE_BUSY = 0x02U, /*!< An internal process is ongoing */ |
| HAL_TIM_STATE_TIMEOUT = 0x03U, /*!< Timeout state */ |
| HAL_TIM_STATE_ERROR = 0x04U /*!< Reception process is ongoing */ |
| } HAL_TIM_StateTypeDef; |
| |
| /** |
| * @brief TIM Channel States definition |
| */ |
| typedef enum |
| { |
| HAL_TIM_CHANNEL_STATE_RESET = 0x00U, /*!< TIM Channel initial state */ |
| HAL_TIM_CHANNEL_STATE_READY = 0x01U, /*!< TIM Channel ready for use */ |
| HAL_TIM_CHANNEL_STATE_BUSY = 0x02U, /*!< An internal process is ongoing on the TIM channel */ |
| } HAL_TIM_ChannelStateTypeDef; |
| |
| /** |
| * @brief DMA Burst States definition |
| */ |
| typedef enum |
| { |
| HAL_DMA_BURST_STATE_RESET = 0x00U, /*!< DMA Burst initial state */ |
| HAL_DMA_BURST_STATE_READY = 0x01U, /*!< DMA Burst ready for use */ |
| HAL_DMA_BURST_STATE_BUSY = 0x02U, /*!< Ongoing DMA Burst */ |
| } HAL_TIM_DMABurstStateTypeDef; |
| |
| /** |
| * @brief HAL Active channel structures definition |
| */ |
| typedef enum |
| { |
| HAL_TIM_ACTIVE_CHANNEL_1 = 0x01U, /*!< The active channel is 1 */ |
| HAL_TIM_ACTIVE_CHANNEL_2 = 0x02U, /*!< The active channel is 2 */ |
| HAL_TIM_ACTIVE_CHANNEL_3 = 0x04U, /*!< The active channel is 3 */ |
| HAL_TIM_ACTIVE_CHANNEL_4 = 0x08U, /*!< The active channel is 4 */ |
| HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00U /*!< All active channels cleared */ |
| } HAL_TIM_ActiveChannel; |
| |
| /** |
| * @brief TIM Time Base Handle Structure definition |
| */ |
| #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) |
| typedef struct __TIM_HandleTypeDef |
| #else |
| typedef struct |
| #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ |
| { |
| TIM_TypeDef *Instance; /*!< Register base address */ |
| TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ |
| HAL_TIM_ActiveChannel Channel; /*!< Active channel */ |
| DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array |
| This array is accessed by a @ref DMA_Handle_index */ |
| HAL_LockTypeDef Lock; /*!< Locking object */ |
| __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ |
| __IO HAL_TIM_ChannelStateTypeDef ChannelState[4]; /*!< TIM channel operation state */ |
| __IO HAL_TIM_ChannelStateTypeDef ChannelNState[4]; /*!< TIM complementary channel operation state */ |
| __IO HAL_TIM_DMABurstStateTypeDef DMABurstState; /*!< DMA burst operation state */ |
| |
| #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) |
| void (* Base_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp Init Callback */ |
| void (* Base_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Base Msp DeInit Callback */ |
| void (* IC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp Init Callback */ |
| void (* IC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM IC Msp DeInit Callback */ |
| void (* OC_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp Init Callback */ |
| void (* OC_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM OC Msp DeInit Callback */ |
| void (* PWM_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp Init Callback */ |
| void (* PWM_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Msp DeInit Callback */ |
| void (* OnePulse_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp Init Callback */ |
| void (* OnePulse_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM One Pulse Msp DeInit Callback */ |
| void (* Encoder_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp Init Callback */ |
| void (* Encoder_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Encoder Msp DeInit Callback */ |
| void (* HallSensor_MspInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp Init Callback */ |
| void (* HallSensor_MspDeInitCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Hall Sensor Msp DeInit Callback */ |
| void (* PeriodElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed Callback */ |
| void (* PeriodElapsedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Period Elapsed half complete Callback */ |
| void (* TriggerCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger Callback */ |
| void (* TriggerHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Trigger half complete Callback */ |
| void (* IC_CaptureCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture Callback */ |
| void (* IC_CaptureHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Input Capture half complete Callback */ |
| void (* OC_DelayElapsedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Output Compare Delay Elapsed Callback */ |
| void (* PWM_PulseFinishedCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished Callback */ |
| void (* PWM_PulseFinishedHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM PWM Pulse Finished half complete Callback */ |
| void (* ErrorCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Error Callback */ |
| void (* CommutationCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation Callback */ |
| void (* CommutationHalfCpltCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Commutation half complete Callback */ |
| void (* BreakCallback)(struct __TIM_HandleTypeDef *htim); /*!< TIM Break Callback */ |
| #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ |
| } TIM_HandleTypeDef; |
| |
| #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) |
| /** |
| * @brief HAL TIM Callback ID enumeration definition |
| */ |
| typedef enum |
| { |
| HAL_TIM_BASE_MSPINIT_CB_ID = 0x00U /*!< TIM Base MspInit Callback ID */ |
| , HAL_TIM_BASE_MSPDEINIT_CB_ID = 0x01U /*!< TIM Base MspDeInit Callback ID */ |
| , HAL_TIM_IC_MSPINIT_CB_ID = 0x02U /*!< TIM IC MspInit Callback ID */ |
| , HAL_TIM_IC_MSPDEINIT_CB_ID = 0x03U /*!< TIM IC MspDeInit Callback ID */ |
| , HAL_TIM_OC_MSPINIT_CB_ID = 0x04U /*!< TIM OC MspInit Callback ID */ |
| , HAL_TIM_OC_MSPDEINIT_CB_ID = 0x05U /*!< TIM OC MspDeInit Callback ID */ |
| , HAL_TIM_PWM_MSPINIT_CB_ID = 0x06U /*!< TIM PWM MspInit Callback ID */ |
| , HAL_TIM_PWM_MSPDEINIT_CB_ID = 0x07U /*!< TIM PWM MspDeInit Callback ID */ |
| , HAL_TIM_ONE_PULSE_MSPINIT_CB_ID = 0x08U /*!< TIM One Pulse MspInit Callback ID */ |
| , HAL_TIM_ONE_PULSE_MSPDEINIT_CB_ID = 0x09U /*!< TIM One Pulse MspDeInit Callback ID */ |
| , HAL_TIM_ENCODER_MSPINIT_CB_ID = 0x0AU /*!< TIM Encoder MspInit Callback ID */ |
| , HAL_TIM_ENCODER_MSPDEINIT_CB_ID = 0x0BU /*!< TIM Encoder MspDeInit Callback ID */ |
| , HAL_TIM_HALL_SENSOR_MSPINIT_CB_ID = 0x0CU /*!< TIM Hall Sensor MspDeInit Callback ID */ |
| , HAL_TIM_HALL_SENSOR_MSPDEINIT_CB_ID = 0x0DU /*!< TIM Hall Sensor MspDeInit Callback ID */ |
| , HAL_TIM_PERIOD_ELAPSED_CB_ID = 0x0EU /*!< TIM Period Elapsed Callback ID */ |
| , HAL_TIM_PERIOD_ELAPSED_HALF_CB_ID = 0x0FU /*!< TIM Period Elapsed half complete Callback ID */ |
| , HAL_TIM_TRIGGER_CB_ID = 0x10U /*!< TIM Trigger Callback ID */ |
| , HAL_TIM_TRIGGER_HALF_CB_ID = 0x11U /*!< TIM Trigger half complete Callback ID */ |
| |
| , HAL_TIM_IC_CAPTURE_CB_ID = 0x12U /*!< TIM Input Capture Callback ID */ |
| , HAL_TIM_IC_CAPTURE_HALF_CB_ID = 0x13U /*!< TIM Input Capture half complete Callback ID */ |
| , HAL_TIM_OC_DELAY_ELAPSED_CB_ID = 0x14U /*!< TIM Output Compare Delay Elapsed Callback ID */ |
| , HAL_TIM_PWM_PULSE_FINISHED_CB_ID = 0x15U /*!< TIM PWM Pulse Finished Callback ID */ |
| , HAL_TIM_PWM_PULSE_FINISHED_HALF_CB_ID = 0x16U /*!< TIM PWM Pulse Finished half complete Callback ID */ |
| , HAL_TIM_ERROR_CB_ID = 0x17U /*!< TIM Error Callback ID */ |
| , HAL_TIM_COMMUTATION_CB_ID = 0x18U /*!< TIM Commutation Callback ID */ |
| , HAL_TIM_COMMUTATION_HALF_CB_ID = 0x19U /*!< TIM Commutation half complete Callback ID */ |
| , HAL_TIM_BREAK_CB_ID = 0x1AU /*!< TIM Break Callback ID */ |
| } HAL_TIM_CallbackIDTypeDef; |
| |
| /** |
| * @brief HAL TIM Callback pointer definition |
| */ |
| typedef void (*pTIM_CallbackTypeDef)(TIM_HandleTypeDef *htim); /*!< pointer to the TIM callback function */ |
| |
| #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ |
| |
| /** |
| * @} |
| */ |
| /* End of exported types -----------------------------------------------------*/ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup TIM_Exported_Constants TIM Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup TIM_ClearInput_Source TIM Clear Input Source |
| * @{ |
| */ |
| #define TIM_CLEARINPUTSOURCE_NONE 0x00000000U /*!< OCREF_CLR is disabled */ |
| #define TIM_CLEARINPUTSOURCE_ETR 0x00000001U /*!< OCREF_CLR is connected to ETRF input */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_DMA_Base_address TIM DMA Base Address |
| * @{ |
| */ |
| #define TIM_DMABASE_CR1 0x00000000U |
| #define TIM_DMABASE_CR2 0x00000001U |
| #define TIM_DMABASE_SMCR 0x00000002U |
| #define TIM_DMABASE_DIER 0x00000003U |
| #define TIM_DMABASE_SR 0x00000004U |
| #define TIM_DMABASE_EGR 0x00000005U |
| #define TIM_DMABASE_CCMR1 0x00000006U |
| #define TIM_DMABASE_CCMR2 0x00000007U |
| #define TIM_DMABASE_CCER 0x00000008U |
| #define TIM_DMABASE_CNT 0x00000009U |
| #define TIM_DMABASE_PSC 0x0000000AU |
| #define TIM_DMABASE_ARR 0x0000000BU |
| #define TIM_DMABASE_RCR 0x0000000CU |
| #define TIM_DMABASE_CCR1 0x0000000DU |
| #define TIM_DMABASE_CCR2 0x0000000EU |
| #define TIM_DMABASE_CCR3 0x0000000FU |
| #define TIM_DMABASE_CCR4 0x00000010U |
| #define TIM_DMABASE_BDTR 0x00000011U |
| #define TIM_DMABASE_DCR 0x00000012U |
| #define TIM_DMABASE_DMAR 0x00000013U |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Event_Source TIM Event Source |
| * @{ |
| */ |
| #define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG /*!< Reinitialize the counter and generates an update of the registers */ |
| #define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G /*!< A capture/compare event is generated on channel 1 */ |
| #define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G /*!< A capture/compare event is generated on channel 2 */ |
| #define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G /*!< A capture/compare event is generated on channel 3 */ |
| #define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G /*!< A capture/compare event is generated on channel 4 */ |
| #define TIM_EVENTSOURCE_COM TIM_EGR_COMG /*!< A commutation event is generated */ |
| #define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG /*!< A trigger event is generated */ |
| #define TIM_EVENTSOURCE_BREAK TIM_EGR_BG /*!< A break event is generated */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Input_Channel_Polarity TIM Input Channel polarity |
| * @{ |
| */ |
| #define TIM_INPUTCHANNELPOLARITY_RISING 0x00000000U /*!< Polarity for TIx source */ |
| #define TIM_INPUTCHANNELPOLARITY_FALLING TIM_CCER_CC1P /*!< Polarity for TIx source */ |
| #define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_ETR_Polarity TIM ETR Polarity |
| * @{ |
| */ |
| #define TIM_ETRPOLARITY_INVERTED TIM_SMCR_ETP /*!< Polarity for ETR source */ |
| #define TIM_ETRPOLARITY_NONINVERTED 0x00000000U /*!< Polarity for ETR source */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler |
| * @{ |
| */ |
| #define TIM_ETRPRESCALER_DIV1 0x00000000U /*!< No prescaler is used */ |
| #define TIM_ETRPRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR input source is divided by 2 */ |
| #define TIM_ETRPRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR input source is divided by 4 */ |
| #define TIM_ETRPRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR input source is divided by 8 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Counter_Mode TIM Counter Mode |
| * @{ |
| */ |
| #define TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as up-counter */ |
| #define TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as down-counter */ |
| #define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 /*!< Center-aligned mode 1 */ |
| #define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 /*!< Center-aligned mode 2 */ |
| #define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS /*!< Center-aligned mode 3 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_ClockDivision TIM Clock Division |
| * @{ |
| */ |
| #define TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< Clock division: tDTS=tCK_INT */ |
| #define TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< Clock division: tDTS=2*tCK_INT */ |
| #define TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< Clock division: tDTS=4*tCK_INT */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Output_Compare_State TIM Output Compare State |
| * @{ |
| */ |
| #define TIM_OUTPUTSTATE_DISABLE 0x00000000U /*!< Capture/Compare 1 output disabled */ |
| #define TIM_OUTPUTSTATE_ENABLE TIM_CCER_CC1E /*!< Capture/Compare 1 output enabled */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_AutoReloadPreload TIM Auto-Reload Preload |
| * @{ |
| */ |
| #define TIM_AUTORELOAD_PRELOAD_DISABLE 0x00000000U /*!< TIMx_ARR register is not buffered */ |
| #define TIM_AUTORELOAD_PRELOAD_ENABLE TIM_CR1_ARPE /*!< TIMx_ARR register is buffered */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Output_Fast_State TIM Output Fast State |
| * @{ |
| */ |
| #define TIM_OCFAST_DISABLE 0x00000000U /*!< Output Compare fast disable */ |
| #define TIM_OCFAST_ENABLE TIM_CCMR1_OC1FE /*!< Output Compare fast enable */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Output_Compare_N_State TIM Complementary Output Compare State |
| * @{ |
| */ |
| #define TIM_OUTPUTNSTATE_DISABLE 0x00000000U /*!< OCxN is disabled */ |
| #define TIM_OUTPUTNSTATE_ENABLE TIM_CCER_CC1NE /*!< OCxN is enabled */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity |
| * @{ |
| */ |
| #define TIM_OCPOLARITY_HIGH 0x00000000U /*!< Capture/Compare output polarity */ |
| #define TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< Capture/Compare output polarity */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Output_Compare_N_Polarity TIM Complementary Output Compare Polarity |
| * @{ |
| */ |
| #define TIM_OCNPOLARITY_HIGH 0x00000000U /*!< Capture/Compare complementary output polarity */ |
| #define TIM_OCNPOLARITY_LOW TIM_CCER_CC1NP /*!< Capture/Compare complementary output polarity */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State |
| * @{ |
| */ |
| #define TIM_OCIDLESTATE_SET TIM_CR2_OIS1 /*!< Output Idle state: OCx=1 when MOE=0 */ |
| #define TIM_OCIDLESTATE_RESET 0x00000000U /*!< Output Idle state: OCx=0 when MOE=0 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Output_Compare_N_Idle_State TIM Complementary Output Compare Idle State |
| * @{ |
| */ |
| #define TIM_OCNIDLESTATE_SET TIM_CR2_OIS1N /*!< Complementary output Idle state: OCxN=1 when MOE=0 */ |
| #define TIM_OCNIDLESTATE_RESET 0x00000000U /*!< Complementary output Idle state: OCxN=0 when MOE=0 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity |
| * @{ |
| */ |
| #define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Capture triggered by rising edge on timer input */ |
| #define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Capture triggered by falling edge on timer input */ |
| #define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Capture triggered by both rising and falling edges on timer input*/ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Encoder_Input_Polarity TIM Encoder Input Polarity |
| * @{ |
| */ |
| #define TIM_ENCODERINPUTPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Encoder input with rising edge polarity */ |
| #define TIM_ENCODERINPUTPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Encoder input with falling edge polarity */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection |
| * @{ |
| */ |
| #define TIM_ICSELECTION_DIRECTTI TIM_CCMR1_CC1S_0 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC1, IC2, IC3 or IC4, respectively */ |
| #define TIM_ICSELECTION_INDIRECTTI TIM_CCMR1_CC1S_1 /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to IC2, IC1, IC4 or IC3, respectively */ |
| #define TIM_ICSELECTION_TRC TIM_CCMR1_CC1S /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler |
| * @{ |
| */ |
| #define TIM_ICPSC_DIV1 0x00000000U /*!< Capture performed each time an edge is detected on the capture input */ |
| #define TIM_ICPSC_DIV2 TIM_CCMR1_IC1PSC_0 /*!< Capture performed once every 2 events */ |
| #define TIM_ICPSC_DIV4 TIM_CCMR1_IC1PSC_1 /*!< Capture performed once every 4 events */ |
| #define TIM_ICPSC_DIV8 TIM_CCMR1_IC1PSC /*!< Capture performed once every 8 events */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode |
| * @{ |
| */ |
| #define TIM_OPMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ |
| #define TIM_OPMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Encoder_Mode TIM Encoder Mode |
| * @{ |
| */ |
| #define TIM_ENCODERMODE_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode, counts up/down on TI1FP1 edge depending on TI2FP2 level */ |
| #define TIM_ENCODERMODE_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode, counts up/down on TI2FP2 edge depending on TI1FP1 level. */ |
| #define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode, counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input. */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Interrupt_definition TIM interrupt Definition |
| * @{ |
| */ |
| #define TIM_IT_UPDATE TIM_DIER_UIE /*!< Update interrupt */ |
| #define TIM_IT_CC1 TIM_DIER_CC1IE /*!< Capture/Compare 1 interrupt */ |
| #define TIM_IT_CC2 TIM_DIER_CC2IE /*!< Capture/Compare 2 interrupt */ |
| #define TIM_IT_CC3 TIM_DIER_CC3IE /*!< Capture/Compare 3 interrupt */ |
| #define TIM_IT_CC4 TIM_DIER_CC4IE /*!< Capture/Compare 4 interrupt */ |
| #define TIM_IT_COM TIM_DIER_COMIE /*!< Commutation interrupt */ |
| #define TIM_IT_TRIGGER TIM_DIER_TIE /*!< Trigger interrupt */ |
| #define TIM_IT_BREAK TIM_DIER_BIE /*!< Break interrupt */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Commutation_Source TIM Commutation Source |
| * @{ |
| */ |
| #define TIM_COMMUTATION_TRGI TIM_CR2_CCUS /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit or when an rising edge occurs on trigger input */ |
| #define TIM_COMMUTATION_SOFTWARE 0x00000000U /*!< When Capture/compare control bits are preloaded, they are updated by setting the COMG bit */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_DMA_sources TIM DMA Sources |
| * @{ |
| */ |
| #define TIM_DMA_UPDATE TIM_DIER_UDE /*!< DMA request is triggered by the update event */ |
| #define TIM_DMA_CC1 TIM_DIER_CC1DE /*!< DMA request is triggered by the capture/compare macth 1 event */ |
| #define TIM_DMA_CC2 TIM_DIER_CC2DE /*!< DMA request is triggered by the capture/compare macth 2 event event */ |
| #define TIM_DMA_CC3 TIM_DIER_CC3DE /*!< DMA request is triggered by the capture/compare macth 3 event event */ |
| #define TIM_DMA_CC4 TIM_DIER_CC4DE /*!< DMA request is triggered by the capture/compare macth 4 event event */ |
| #define TIM_DMA_COM TIM_DIER_COMDE /*!< DMA request is triggered by the commutation event */ |
| #define TIM_DMA_TRIGGER TIM_DIER_TDE /*!< DMA request is triggered by the trigger event */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Flag_definition TIM Flag Definition |
| * @{ |
| */ |
| #define TIM_FLAG_UPDATE TIM_SR_UIF /*!< Update interrupt flag */ |
| #define TIM_FLAG_CC1 TIM_SR_CC1IF /*!< Capture/Compare 1 interrupt flag */ |
| #define TIM_FLAG_CC2 TIM_SR_CC2IF /*!< Capture/Compare 2 interrupt flag */ |
| #define TIM_FLAG_CC3 TIM_SR_CC3IF /*!< Capture/Compare 3 interrupt flag */ |
| #define TIM_FLAG_CC4 TIM_SR_CC4IF /*!< Capture/Compare 4 interrupt flag */ |
| #define TIM_FLAG_COM TIM_SR_COMIF /*!< Commutation interrupt flag */ |
| #define TIM_FLAG_TRIGGER TIM_SR_TIF /*!< Trigger interrupt flag */ |
| #define TIM_FLAG_BREAK TIM_SR_BIF /*!< Break interrupt flag */ |
| #define TIM_FLAG_CC1OF TIM_SR_CC1OF /*!< Capture 1 overcapture flag */ |
| #define TIM_FLAG_CC2OF TIM_SR_CC2OF /*!< Capture 2 overcapture flag */ |
| #define TIM_FLAG_CC3OF TIM_SR_CC3OF /*!< Capture 3 overcapture flag */ |
| #define TIM_FLAG_CC4OF TIM_SR_CC4OF /*!< Capture 4 overcapture flag */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Channel TIM Channel |
| * @{ |
| */ |
| #define TIM_CHANNEL_1 0x00000000U /*!< Capture/compare channel 1 identifier */ |
| #define TIM_CHANNEL_2 0x00000004U /*!< Capture/compare channel 2 identifier */ |
| #define TIM_CHANNEL_3 0x00000008U /*!< Capture/compare channel 3 identifier */ |
| #define TIM_CHANNEL_4 0x0000000CU /*!< Capture/compare channel 4 identifier */ |
| #define TIM_CHANNEL_ALL 0x0000003CU /*!< Global Capture/compare channel identifier */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Clock_Source TIM Clock Source |
| * @{ |
| */ |
| #define TIM_CLOCKSOURCE_ETRMODE2 TIM_SMCR_ETPS_1 /*!< External clock source mode 2 */ |
| #define TIM_CLOCKSOURCE_INTERNAL TIM_SMCR_ETPS_0 /*!< Internal clock source */ |
| #define TIM_CLOCKSOURCE_ITR0 TIM_TS_ITR0 /*!< External clock source mode 1 (ITR0) */ |
| #define TIM_CLOCKSOURCE_ITR1 TIM_TS_ITR1 /*!< External clock source mode 1 (ITR1) */ |
| #define TIM_CLOCKSOURCE_ITR2 TIM_TS_ITR2 /*!< External clock source mode 1 (ITR2) */ |
| #define TIM_CLOCKSOURCE_ITR3 TIM_TS_ITR3 /*!< External clock source mode 1 (ITR3) */ |
| #define TIM_CLOCKSOURCE_TI1ED TIM_TS_TI1F_ED /*!< External clock source mode 1 (TTI1FP1 + edge detect.) */ |
| #define TIM_CLOCKSOURCE_TI1 TIM_TS_TI1FP1 /*!< External clock source mode 1 (TTI1FP1) */ |
| #define TIM_CLOCKSOURCE_TI2 TIM_TS_TI2FP2 /*!< External clock source mode 1 (TTI2FP2) */ |
| #define TIM_CLOCKSOURCE_ETRMODE1 TIM_TS_ETRF /*!< External clock source mode 1 (ETRF) */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Clock_Polarity TIM Clock Polarity |
| * @{ |
| */ |
| #define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ |
| #define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ |
| #define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ |
| #define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ |
| #define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler |
| * @{ |
| */ |
| #define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ |
| #define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ |
| #define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ |
| #define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity |
| * @{ |
| */ |
| #define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ |
| #define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler |
| * @{ |
| */ |
| #define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ |
| #define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ |
| #define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ |
| #define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state |
| * @{ |
| */ |
| #define TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ |
| #define TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state |
| * @{ |
| */ |
| #define TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OC/OCN outputs are enabled (still controlled by the timer) */ |
| #define TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OC/OCN outputs are disabled (not controlled any longer by the timer) */ |
| /** |
| * @} |
| */ |
| /** @defgroup TIM_Lock_level TIM Lock level |
| * @{ |
| */ |
| #define TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF */ |
| #define TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ |
| #define TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ |
| #define TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Break_Input_enable_disable TIM Break Input Enable |
| * @{ |
| */ |
| #define TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break input BRK is enabled */ |
| #define TIM_BREAK_DISABLE 0x00000000U /*!< Break input BRK is disabled */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Break_Polarity TIM Break Input Polarity |
| * @{ |
| */ |
| #define TIM_BREAKPOLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ |
| #define TIM_BREAKPOLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_AOE_Bit_Set_Reset TIM Automatic Output Enable |
| * @{ |
| */ |
| #define TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ |
| #define TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event (if none of the break inputs BRK and BRK2 is active) */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection |
| * @{ |
| */ |
| #define TIM_TRGO_RESET 0x00000000U /*!< TIMx_EGR.UG bit is used as trigger output (TRGO) */ |
| #define TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< TIMx_CR1.CEN bit is used as trigger output (TRGO) */ |
| #define TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output (TRGO) */ |
| #define TIM_TRGO_OC1 (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< Capture or a compare match 1 is used as trigger output (TRGO) */ |
| #define TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output (TRGO) */ |
| #define TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output(TRGO) */ |
| #define TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output(TRGO) */ |
| #define TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output(TRGO) */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Master_Slave_Mode TIM Master/Slave Mode |
| * @{ |
| */ |
| #define TIM_MASTERSLAVEMODE_ENABLE TIM_SMCR_MSM /*!< No action */ |
| #define TIM_MASTERSLAVEMODE_DISABLE 0x00000000U /*!< Master/slave mode is selected */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Slave_Mode TIM Slave mode |
| * @{ |
| */ |
| #define TIM_SLAVEMODE_DISABLE 0x00000000U /*!< Slave mode disabled */ |
| #define TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode */ |
| #define TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode */ |
| #define TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode */ |
| #define TIM_SLAVEMODE_EXTERNAL1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< External Clock Mode 1 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM Modes |
| * @{ |
| */ |
| #define TIM_OCMODE_TIMING 0x00000000U /*!< Frozen */ |
| #define TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!< Set channel to active level on match */ |
| #define TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!< Set channel to inactive level on match */ |
| #define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< Toggle */ |
| #define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!< PWM mode 1 */ |
| #define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!< PWM mode 2 */ |
| #define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!< Force active level */ |
| #define TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!< Force inactive level */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Trigger_Selection TIM Trigger Selection |
| * @{ |
| */ |
| #define TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) */ |
| #define TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) */ |
| #define TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) */ |
| #define TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) */ |
| #define TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) */ |
| #define TIM_TS_TI1FP1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 1 (TI1FP1) */ |
| #define TIM_TS_TI2FP2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered Timer Input 2 (TI2FP2) */ |
| #define TIM_TS_ETRF (TIM_SMCR_TS_0 | TIM_SMCR_TS_1 | TIM_SMCR_TS_2) /*!< Filtered External Trigger input (ETRF) */ |
| #define TIM_TS_NONE 0x0000FFFFU /*!< No trigger selected */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity |
| * @{ |
| */ |
| #define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ |
| #define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ |
| #define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ |
| #define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ |
| #define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler |
| * @{ |
| */ |
| #define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ |
| #define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ |
| #define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ |
| #define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_TI1_Selection TIM TI1 Input Selection |
| * @{ |
| */ |
| #define TIM_TI1SELECTION_CH1 0x00000000U /*!< The TIMx_CH1 pin is connected to TI1 input */ |
| #define TIM_TI1SELECTION_XORCOMBINATION TIM_CR2_TI1S /*!< The TIMx_CH1, CH2 and CH3 pins are connected to the TI1 input (XOR combination) */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length |
| * @{ |
| */ |
| #define TIM_DMABURSTLENGTH_1TRANSFER 0x00000000U /*!< The transfer is done to 1 register starting from TIMx_CR1 + TIMx_DCR.DBA */ |
| #define TIM_DMABURSTLENGTH_2TRANSFERS 0x00000100U /*!< The transfer is done to 2 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ |
| #define TIM_DMABURSTLENGTH_3TRANSFERS 0x00000200U /*!< The transfer is done to 3 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ |
| #define TIM_DMABURSTLENGTH_4TRANSFERS 0x00000300U /*!< The transfer is done to 4 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ |
| #define TIM_DMABURSTLENGTH_5TRANSFERS 0x00000400U /*!< The transfer is done to 5 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ |
| #define TIM_DMABURSTLENGTH_6TRANSFERS 0x00000500U /*!< The transfer is done to 6 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ |
| #define TIM_DMABURSTLENGTH_7TRANSFERS 0x00000600U /*!< The transfer is done to 7 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ |
| #define TIM_DMABURSTLENGTH_8TRANSFERS 0x00000700U /*!< The transfer is done to 8 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ |
| #define TIM_DMABURSTLENGTH_9TRANSFERS 0x00000800U /*!< The transfer is done to 9 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ |
| #define TIM_DMABURSTLENGTH_10TRANSFERS 0x00000900U /*!< The transfer is done to 10 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ |
| #define TIM_DMABURSTLENGTH_11TRANSFERS 0x00000A00U /*!< The transfer is done to 11 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ |
| #define TIM_DMABURSTLENGTH_12TRANSFERS 0x00000B00U /*!< The transfer is done to 12 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ |
| #define TIM_DMABURSTLENGTH_13TRANSFERS 0x00000C00U /*!< The transfer is done to 13 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ |
| #define TIM_DMABURSTLENGTH_14TRANSFERS 0x00000D00U /*!< The transfer is done to 14 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ |
| #define TIM_DMABURSTLENGTH_15TRANSFERS 0x00000E00U /*!< The transfer is done to 15 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ |
| #define TIM_DMABURSTLENGTH_16TRANSFERS 0x00000F00U /*!< The transfer is done to 16 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ |
| #define TIM_DMABURSTLENGTH_17TRANSFERS 0x00001000U /*!< The transfer is done to 17 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ |
| #define TIM_DMABURSTLENGTH_18TRANSFERS 0x00001100U /*!< The transfer is done to 18 registers starting from TIMx_CR1 + TIMx_DCR.DBA */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_Handle_index TIM DMA Handle Index |
| * @{ |
| */ |
| #define TIM_DMA_ID_UPDATE ((uint16_t) 0x0000) /*!< Index of the DMA handle used for Update DMA requests */ |
| #define TIM_DMA_ID_CC1 ((uint16_t) 0x0001) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ |
| #define TIM_DMA_ID_CC2 ((uint16_t) 0x0002) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ |
| #define TIM_DMA_ID_CC3 ((uint16_t) 0x0003) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ |
| #define TIM_DMA_ID_CC4 ((uint16_t) 0x0004) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ |
| #define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x0005) /*!< Index of the DMA handle used for Commutation DMA requests */ |
| #define TIM_DMA_ID_TRIGGER ((uint16_t) 0x0006) /*!< Index of the DMA handle used for Trigger DMA requests */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup Channel_CC_State TIM Capture/Compare Channel State |
| * @{ |
| */ |
| #define TIM_CCx_ENABLE 0x00000001U /*!< Input or output channel is enabled */ |
| #define TIM_CCx_DISABLE 0x00000000U /*!< Input or output channel is disabled */ |
| #define TIM_CCxN_ENABLE 0x00000004U /*!< Complementary output channel is enabled */ |
| #define TIM_CCxN_DISABLE 0x00000000U /*!< Complementary output channel is enabled */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| /* End of exported constants -------------------------------------------------*/ |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| /** @defgroup TIM_Exported_Macros TIM Exported Macros |
| * @{ |
| */ |
| |
| /** @brief Reset TIM handle state. |
| * @param __HANDLE__ TIM handle. |
| * @retval None |
| */ |
| #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) |
| #define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ |
| (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ |
| (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ |
| (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ |
| (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ |
| (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ |
| (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ |
| (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ |
| (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ |
| (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ |
| (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ |
| (__HANDLE__)->Base_MspInitCallback = NULL; \ |
| (__HANDLE__)->Base_MspDeInitCallback = NULL; \ |
| (__HANDLE__)->IC_MspInitCallback = NULL; \ |
| (__HANDLE__)->IC_MspDeInitCallback = NULL; \ |
| (__HANDLE__)->OC_MspInitCallback = NULL; \ |
| (__HANDLE__)->OC_MspDeInitCallback = NULL; \ |
| (__HANDLE__)->PWM_MspInitCallback = NULL; \ |
| (__HANDLE__)->PWM_MspDeInitCallback = NULL; \ |
| (__HANDLE__)->OnePulse_MspInitCallback = NULL; \ |
| (__HANDLE__)->OnePulse_MspDeInitCallback = NULL; \ |
| (__HANDLE__)->Encoder_MspInitCallback = NULL; \ |
| (__HANDLE__)->Encoder_MspDeInitCallback = NULL; \ |
| (__HANDLE__)->HallSensor_MspInitCallback = NULL; \ |
| (__HANDLE__)->HallSensor_MspDeInitCallback = NULL; \ |
| } while(0) |
| #else |
| #define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) do { \ |
| (__HANDLE__)->State = HAL_TIM_STATE_RESET; \ |
| (__HANDLE__)->ChannelState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ |
| (__HANDLE__)->ChannelState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ |
| (__HANDLE__)->ChannelState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ |
| (__HANDLE__)->ChannelState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ |
| (__HANDLE__)->ChannelNState[0] = HAL_TIM_CHANNEL_STATE_RESET; \ |
| (__HANDLE__)->ChannelNState[1] = HAL_TIM_CHANNEL_STATE_RESET; \ |
| (__HANDLE__)->ChannelNState[2] = HAL_TIM_CHANNEL_STATE_RESET; \ |
| (__HANDLE__)->ChannelNState[3] = HAL_TIM_CHANNEL_STATE_RESET; \ |
| (__HANDLE__)->DMABurstState = HAL_DMA_BURST_STATE_RESET; \ |
| } while(0) |
| #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ |
| |
| /** |
| * @brief Enable the TIM peripheral. |
| * @param __HANDLE__ TIM handle |
| * @retval None |
| */ |
| #define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) |
| |
| /** |
| * @brief Enable the TIM main Output. |
| * @param __HANDLE__ TIM handle |
| * @retval None |
| */ |
| #define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) |
| |
| /** |
| * @brief Disable the TIM peripheral. |
| * @param __HANDLE__ TIM handle |
| * @retval None |
| */ |
| #define __HAL_TIM_DISABLE(__HANDLE__) \ |
| do { \ |
| if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ |
| { \ |
| if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ |
| { \ |
| (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ |
| } \ |
| } \ |
| } while(0) |
| |
| /** |
| * @brief Disable the TIM main Output. |
| * @param __HANDLE__ TIM handle |
| * @retval None |
| * @note The Main Output Enable of a timer instance is disabled only if all the CCx and CCxN channels have been |
| * disabled |
| */ |
| #define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ |
| do { \ |
| if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0UL) \ |
| { \ |
| if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0UL) \ |
| { \ |
| (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ |
| } \ |
| } \ |
| } while(0) |
| |
| /** |
| * @brief Disable the TIM main Output. |
| * @param __HANDLE__ TIM handle |
| * @retval None |
| * @note The Main Output Enable of a timer instance is disabled unconditionally |
| */ |
| #define __HAL_TIM_MOE_DISABLE_UNCONDITIONALLY(__HANDLE__) (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE) |
| |
| /** @brief Enable the specified TIM interrupt. |
| * @param __HANDLE__ specifies the TIM Handle. |
| * @param __INTERRUPT__ specifies the TIM interrupt source to enable. |
| * This parameter can be one of the following values: |
| * @arg TIM_IT_UPDATE: Update interrupt |
| * @arg TIM_IT_CC1: Capture/Compare 1 interrupt |
| * @arg TIM_IT_CC2: Capture/Compare 2 interrupt |
| * @arg TIM_IT_CC3: Capture/Compare 3 interrupt |
| * @arg TIM_IT_CC4: Capture/Compare 4 interrupt |
| * @arg TIM_IT_COM: Commutation interrupt |
| * @arg TIM_IT_TRIGGER: Trigger interrupt |
| * @arg TIM_IT_BREAK: Break interrupt |
| * @retval None |
| */ |
| #define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) |
| |
| /** @brief Disable the specified TIM interrupt. |
| * @param __HANDLE__ specifies the TIM Handle. |
| * @param __INTERRUPT__ specifies the TIM interrupt source to disable. |
| * This parameter can be one of the following values: |
| * @arg TIM_IT_UPDATE: Update interrupt |
| * @arg TIM_IT_CC1: Capture/Compare 1 interrupt |
| * @arg TIM_IT_CC2: Capture/Compare 2 interrupt |
| * @arg TIM_IT_CC3: Capture/Compare 3 interrupt |
| * @arg TIM_IT_CC4: Capture/Compare 4 interrupt |
| * @arg TIM_IT_COM: Commutation interrupt |
| * @arg TIM_IT_TRIGGER: Trigger interrupt |
| * @arg TIM_IT_BREAK: Break interrupt |
| * @retval None |
| */ |
| #define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) |
| |
| /** @brief Enable the specified DMA request. |
| * @param __HANDLE__ specifies the TIM Handle. |
| * @param __DMA__ specifies the TIM DMA request to enable. |
| * This parameter can be one of the following values: |
| * @arg TIM_DMA_UPDATE: Update DMA request |
| * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request |
| * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request |
| * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request |
| * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request |
| * @arg TIM_DMA_COM: Commutation DMA request |
| * @arg TIM_DMA_TRIGGER: Trigger DMA request |
| * @retval None |
| */ |
| #define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) |
| |
| /** @brief Disable the specified DMA request. |
| * @param __HANDLE__ specifies the TIM Handle. |
| * @param __DMA__ specifies the TIM DMA request to disable. |
| * This parameter can be one of the following values: |
| * @arg TIM_DMA_UPDATE: Update DMA request |
| * @arg TIM_DMA_CC1: Capture/Compare 1 DMA request |
| * @arg TIM_DMA_CC2: Capture/Compare 2 DMA request |
| * @arg TIM_DMA_CC3: Capture/Compare 3 DMA request |
| * @arg TIM_DMA_CC4: Capture/Compare 4 DMA request |
| * @arg TIM_DMA_COM: Commutation DMA request |
| * @arg TIM_DMA_TRIGGER: Trigger DMA request |
| * @retval None |
| */ |
| #define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) |
| |
| /** @brief Check whether the specified TIM interrupt flag is set or not. |
| * @param __HANDLE__ specifies the TIM Handle. |
| * @param __FLAG__ specifies the TIM interrupt flag to check. |
| * This parameter can be one of the following values: |
| * @arg TIM_FLAG_UPDATE: Update interrupt flag |
| * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag |
| * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag |
| * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag |
| * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag |
| * @arg TIM_FLAG_COM: Commutation interrupt flag |
| * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag |
| * @arg TIM_FLAG_BREAK: Break interrupt flag |
| * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag |
| * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag |
| * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag |
| * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag |
| * @retval The new state of __FLAG__ (TRUE or FALSE). |
| */ |
| #define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) |
| |
| /** @brief Clear the specified TIM interrupt flag. |
| * @param __HANDLE__ specifies the TIM Handle. |
| * @param __FLAG__ specifies the TIM interrupt flag to clear. |
| * This parameter can be one of the following values: |
| * @arg TIM_FLAG_UPDATE: Update interrupt flag |
| * @arg TIM_FLAG_CC1: Capture/Compare 1 interrupt flag |
| * @arg TIM_FLAG_CC2: Capture/Compare 2 interrupt flag |
| * @arg TIM_FLAG_CC3: Capture/Compare 3 interrupt flag |
| * @arg TIM_FLAG_CC4: Capture/Compare 4 interrupt flag |
| * @arg TIM_FLAG_COM: Commutation interrupt flag |
| * @arg TIM_FLAG_TRIGGER: Trigger interrupt flag |
| * @arg TIM_FLAG_BREAK: Break interrupt flag |
| * @arg TIM_FLAG_CC1OF: Capture/Compare 1 overcapture flag |
| * @arg TIM_FLAG_CC2OF: Capture/Compare 2 overcapture flag |
| * @arg TIM_FLAG_CC3OF: Capture/Compare 3 overcapture flag |
| * @arg TIM_FLAG_CC4OF: Capture/Compare 4 overcapture flag |
| * @retval The new state of __FLAG__ (TRUE or FALSE). |
| */ |
| #define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) |
| |
| /** |
| * @brief Check whether the specified TIM interrupt source is enabled or not. |
| * @param __HANDLE__ TIM handle |
| * @param __INTERRUPT__ specifies the TIM interrupt source to check. |
| * This parameter can be one of the following values: |
| * @arg TIM_IT_UPDATE: Update interrupt |
| * @arg TIM_IT_CC1: Capture/Compare 1 interrupt |
| * @arg TIM_IT_CC2: Capture/Compare 2 interrupt |
| * @arg TIM_IT_CC3: Capture/Compare 3 interrupt |
| * @arg TIM_IT_CC4: Capture/Compare 4 interrupt |
| * @arg TIM_IT_COM: Commutation interrupt |
| * @arg TIM_IT_TRIGGER: Trigger interrupt |
| * @arg TIM_IT_BREAK: Break interrupt |
| * @retval The state of TIM_IT (SET or RESET). |
| */ |
| #define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) \ |
| == (__INTERRUPT__)) ? SET : RESET) |
| |
| /** @brief Clear the TIM interrupt pending bits. |
| * @param __HANDLE__ TIM handle |
| * @param __INTERRUPT__ specifies the interrupt pending bit to clear. |
| * This parameter can be one of the following values: |
| * @arg TIM_IT_UPDATE: Update interrupt |
| * @arg TIM_IT_CC1: Capture/Compare 1 interrupt |
| * @arg TIM_IT_CC2: Capture/Compare 2 interrupt |
| * @arg TIM_IT_CC3: Capture/Compare 3 interrupt |
| * @arg TIM_IT_CC4: Capture/Compare 4 interrupt |
| * @arg TIM_IT_COM: Commutation interrupt |
| * @arg TIM_IT_TRIGGER: Trigger interrupt |
| * @arg TIM_IT_BREAK: Break interrupt |
| * @retval None |
| */ |
| #define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) |
| |
| /** |
| * @brief Indicates whether or not the TIM Counter is used as downcounter. |
| * @param __HANDLE__ TIM handle. |
| * @retval False (Counter used as upcounter) or True (Counter used as downcounter) |
| * @note This macro is particularly useful to get the counting mode when the timer operates in Center-aligned mode |
| * or Encoder mode. |
| */ |
| #define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) |
| |
| /** |
| * @brief Set the TIM Prescaler on runtime. |
| * @param __HANDLE__ TIM handle. |
| * @param __PRESC__ specifies the Prescaler new value. |
| * @retval None |
| */ |
| #define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) |
| |
| /** |
| * @brief Set the TIM Counter Register value on runtime. |
| * @param __HANDLE__ TIM handle. |
| * @param __COUNTER__ specifies the Counter register new value. |
| * @retval None |
| */ |
| #define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) |
| |
| /** |
| * @brief Get the TIM Counter Register value on runtime. |
| * @param __HANDLE__ TIM handle. |
| * @retval 16-bit or 32-bit value of the timer counter register (TIMx_CNT) |
| */ |
| #define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT) |
| |
| /** |
| * @brief Set the TIM Autoreload Register value on runtime without calling another time any Init function. |
| * @param __HANDLE__ TIM handle. |
| * @param __AUTORELOAD__ specifies the Counter register new value. |
| * @retval None |
| */ |
| #define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ |
| do{ \ |
| (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ |
| (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ |
| } while(0) |
| |
| /** |
| * @brief Get the TIM Autoreload Register value on runtime. |
| * @param __HANDLE__ TIM handle. |
| * @retval 16-bit or 32-bit value of the timer auto-reload register(TIMx_ARR) |
| */ |
| #define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR) |
| |
| /** |
| * @brief Set the TIM Clock Division value on runtime without calling another time any Init function. |
| * @param __HANDLE__ TIM handle. |
| * @param __CKD__ specifies the clock division value. |
| * This parameter can be one of the following value: |
| * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT |
| * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT |
| * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT |
| * @retval None |
| */ |
| #define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ |
| do{ \ |
| (__HANDLE__)->Instance->CR1 &= (~TIM_CR1_CKD); \ |
| (__HANDLE__)->Instance->CR1 |= (__CKD__); \ |
| (__HANDLE__)->Init.ClockDivision = (__CKD__); \ |
| } while(0) |
| |
| /** |
| * @brief Get the TIM Clock Division value on runtime. |
| * @param __HANDLE__ TIM handle. |
| * @retval The clock division can be one of the following values: |
| * @arg TIM_CLOCKDIVISION_DIV1: tDTS=tCK_INT |
| * @arg TIM_CLOCKDIVISION_DIV2: tDTS=2*tCK_INT |
| * @arg TIM_CLOCKDIVISION_DIV4: tDTS=4*tCK_INT |
| */ |
| #define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) |
| |
| /** |
| * @brief Set the TIM Input Capture prescaler on runtime without calling another time HAL_TIM_IC_ConfigChannel() |
| * function. |
| * @param __HANDLE__ TIM handle. |
| * @param __CHANNEL__ TIM Channels to be configured. |
| * This parameter can be one of the following values: |
| * @arg TIM_CHANNEL_1: TIM Channel 1 selected |
| * @arg TIM_CHANNEL_2: TIM Channel 2 selected |
| * @arg TIM_CHANNEL_3: TIM Channel 3 selected |
| * @arg TIM_CHANNEL_4: TIM Channel 4 selected |
| * @param __ICPSC__ specifies the Input Capture4 prescaler new value. |
| * This parameter can be one of the following values: |
| * @arg TIM_ICPSC_DIV1: no prescaler |
| * @arg TIM_ICPSC_DIV2: capture is done once every 2 events |
| * @arg TIM_ICPSC_DIV4: capture is done once every 4 events |
| * @arg TIM_ICPSC_DIV8: capture is done once every 8 events |
| * @retval None |
| */ |
| #define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ |
| do{ \ |
| TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ |
| TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ |
| } while(0) |
| |
| /** |
| * @brief Get the TIM Input Capture prescaler on runtime. |
| * @param __HANDLE__ TIM handle. |
| * @param __CHANNEL__ TIM Channels to be configured. |
| * This parameter can be one of the following values: |
| * @arg TIM_CHANNEL_1: get input capture 1 prescaler value |
| * @arg TIM_CHANNEL_2: get input capture 2 prescaler value |
| * @arg TIM_CHANNEL_3: get input capture 3 prescaler value |
| * @arg TIM_CHANNEL_4: get input capture 4 prescaler value |
| * @retval The input capture prescaler can be one of the following values: |
| * @arg TIM_ICPSC_DIV1: no prescaler |
| * @arg TIM_ICPSC_DIV2: capture is done once every 2 events |
| * @arg TIM_ICPSC_DIV4: capture is done once every 4 events |
| * @arg TIM_ICPSC_DIV8: capture is done once every 8 events |
| */ |
| #define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ |
| (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8U) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ |
| (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8U) |
| |
| /** |
| * @brief Set the TIM Capture Compare Register value on runtime without calling another time ConfigChannel function. |
| * @param __HANDLE__ TIM handle. |
| * @param __CHANNEL__ TIM Channels to be configured. |
| * This parameter can be one of the following values: |
| * @arg TIM_CHANNEL_1: TIM Channel 1 selected |
| * @arg TIM_CHANNEL_2: TIM Channel 2 selected |
| * @arg TIM_CHANNEL_3: TIM Channel 3 selected |
| * @arg TIM_CHANNEL_4: TIM Channel 4 selected |
| * @param __COMPARE__ specifies the Capture Compare register new value. |
| * @retval None |
| */ |
| #define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ |
| (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\ |
| ((__HANDLE__)->Instance->CCR4 = (__COMPARE__))) |
| |
| /** |
| * @brief Get the TIM Capture Compare Register value on runtime. |
| * @param __HANDLE__ TIM handle. |
| * @param __CHANNEL__ TIM Channel associated with the capture compare register |
| * This parameter can be one of the following values: |
| * @arg TIM_CHANNEL_1: get capture/compare 1 register value |
| * @arg TIM_CHANNEL_2: get capture/compare 2 register value |
| * @arg TIM_CHANNEL_3: get capture/compare 3 register value |
| * @arg TIM_CHANNEL_4: get capture/compare 4 register value |
| * @retval 16-bit or 32-bit value of the capture/compare register (TIMx_CCRy) |
| */ |
| #define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ |
| (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\ |
| ((__HANDLE__)->Instance->CCR4)) |
| |
| /** |
| * @brief Set the TIM Output compare preload. |
| * @param __HANDLE__ TIM handle. |
| * @param __CHANNEL__ TIM Channels to be configured. |
| * This parameter can be one of the following values: |
| * @arg TIM_CHANNEL_1: TIM Channel 1 selected |
| * @arg TIM_CHANNEL_2: TIM Channel 2 selected |
| * @arg TIM_CHANNEL_3: TIM Channel 3 selected |
| * @arg TIM_CHANNEL_4: TIM Channel 4 selected |
| * @retval None |
| */ |
| #define __HAL_TIM_ENABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ |
| (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1PE) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2PE) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3PE) :\ |
| ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4PE)) |
| |
| /** |
| * @brief Reset the TIM Output compare preload. |
| * @param __HANDLE__ TIM handle. |
| * @param __CHANNEL__ TIM Channels to be configured. |
| * This parameter can be one of the following values: |
| * @arg TIM_CHANNEL_1: TIM Channel 1 selected |
| * @arg TIM_CHANNEL_2: TIM Channel 2 selected |
| * @arg TIM_CHANNEL_3: TIM Channel 3 selected |
| * @arg TIM_CHANNEL_4: TIM Channel 4 selected |
| * @retval None |
| */ |
| #define __HAL_TIM_DISABLE_OCxPRELOAD(__HANDLE__, __CHANNEL__) \ |
| (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1PE) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2PE) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3PE) :\ |
| ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4PE)) |
| |
| /** |
| * @brief Enable fast mode for a given channel. |
| * @param __HANDLE__ TIM handle. |
| * @param __CHANNEL__ TIM Channels to be configured. |
| * This parameter can be one of the following values: |
| * @arg TIM_CHANNEL_1: TIM Channel 1 selected |
| * @arg TIM_CHANNEL_2: TIM Channel 2 selected |
| * @arg TIM_CHANNEL_3: TIM Channel 3 selected |
| * @arg TIM_CHANNEL_4: TIM Channel 4 selected |
| * @note When fast mode is enabled an active edge on the trigger input acts |
| * like a compare match on CCx output. Delay to sample the trigger |
| * input and to activate CCx output is reduced to 3 clock cycles. |
| * @note Fast mode acts only if the channel is configured in PWM1 or PWM2 mode. |
| * @retval None |
| */ |
| #define __HAL_TIM_ENABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ |
| (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC1FE) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= TIM_CCMR1_OC2FE) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC3FE) :\ |
| ((__HANDLE__)->Instance->CCMR2 |= TIM_CCMR2_OC4FE)) |
| |
| /** |
| * @brief Disable fast mode for a given channel. |
| * @param __HANDLE__ TIM handle. |
| * @param __CHANNEL__ TIM Channels to be configured. |
| * This parameter can be one of the following values: |
| * @arg TIM_CHANNEL_1: TIM Channel 1 selected |
| * @arg TIM_CHANNEL_2: TIM Channel 2 selected |
| * @arg TIM_CHANNEL_3: TIM Channel 3 selected |
| * @arg TIM_CHANNEL_4: TIM Channel 4 selected |
| * @note When fast mode is disabled CCx output behaves normally depending |
| * on counter and CCRx values even when the trigger is ON. The minimum |
| * delay to activate CCx output when an active edge occurs on the |
| * trigger input is 5 clock cycles. |
| * @retval None |
| */ |
| #define __HAL_TIM_DISABLE_OCxFAST(__HANDLE__, __CHANNEL__) \ |
| (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE) :\ |
| ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE)) |
| |
| /** |
| * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register. |
| * @param __HANDLE__ TIM handle. |
| * @note When the URS bit of the TIMx_CR1 register is set, only counter |
| * overflow/underflow generates an update interrupt or DMA request (if |
| * enabled) |
| * @retval None |
| */ |
| #define __HAL_TIM_URS_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|= TIM_CR1_URS) |
| |
| /** |
| * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register. |
| * @param __HANDLE__ TIM handle. |
| * @note When the URS bit of the TIMx_CR1 register is reset, any of the |
| * following events generate an update interrupt or DMA request (if |
| * enabled): |
| * _ Counter overflow underflow |
| * _ Setting the UG bit |
| * _ Update generation through the slave mode controller |
| * @retval None |
| */ |
| #define __HAL_TIM_URS_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1&=~TIM_CR1_URS) |
| |
| /** |
| * @brief Set the TIM Capture x input polarity on runtime. |
| * @param __HANDLE__ TIM handle. |
| * @param __CHANNEL__ TIM Channels to be configured. |
| * This parameter can be one of the following values: |
| * @arg TIM_CHANNEL_1: TIM Channel 1 selected |
| * @arg TIM_CHANNEL_2: TIM Channel 2 selected |
| * @arg TIM_CHANNEL_3: TIM Channel 3 selected |
| * @arg TIM_CHANNEL_4: TIM Channel 4 selected |
| * @param __POLARITY__ Polarity for TIx source |
| * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge |
| * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge |
| * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge |
| * @retval None |
| */ |
| #define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ |
| do{ \ |
| TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ |
| TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ |
| }while(0) |
| |
| /** |
| * @} |
| */ |
| /* End of exported macros ----------------------------------------------------*/ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup TIM_Private_Constants TIM Private Constants |
| * @{ |
| */ |
| /* The counter of a timer instance is disabled only if all the CCx and CCxN |
| channels have been disabled */ |
| #define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) |
| #define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) |
| /** |
| * @} |
| */ |
| /* End of private constants --------------------------------------------------*/ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup TIM_Private_Macros TIM Private Macros |
| * @{ |
| */ |
| #define IS_TIM_CLEARINPUT_SOURCE(__MODE__) (((__MODE__) == TIM_CLEARINPUTSOURCE_NONE) || \ |
| ((__MODE__) == TIM_CLEARINPUTSOURCE_ETR)) |
| |
| #define IS_TIM_DMA_BASE(__BASE__) (((__BASE__) == TIM_DMABASE_CR1) || \ |
| ((__BASE__) == TIM_DMABASE_CR2) || \ |
| ((__BASE__) == TIM_DMABASE_SMCR) || \ |
| ((__BASE__) == TIM_DMABASE_DIER) || \ |
| ((__BASE__) == TIM_DMABASE_SR) || \ |
| ((__BASE__) == TIM_DMABASE_EGR) || \ |
| ((__BASE__) == TIM_DMABASE_CCMR1) || \ |
| ((__BASE__) == TIM_DMABASE_CCMR2) || \ |
| ((__BASE__) == TIM_DMABASE_CCER) || \ |
| ((__BASE__) == TIM_DMABASE_CNT) || \ |
| ((__BASE__) == TIM_DMABASE_PSC) || \ |
| ((__BASE__) == TIM_DMABASE_ARR) || \ |
| ((__BASE__) == TIM_DMABASE_RCR) || \ |
| ((__BASE__) == TIM_DMABASE_CCR1) || \ |
| ((__BASE__) == TIM_DMABASE_CCR2) || \ |
| ((__BASE__) == TIM_DMABASE_CCR3) || \ |
| ((__BASE__) == TIM_DMABASE_CCR4) || \ |
| ((__BASE__) == TIM_DMABASE_BDTR)) |
| |
| #define IS_TIM_EVENT_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFFFF00U) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) |
| |
| #define IS_TIM_COUNTER_MODE(__MODE__) (((__MODE__) == TIM_COUNTERMODE_UP) || \ |
| ((__MODE__) == TIM_COUNTERMODE_DOWN) || \ |
| ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED1) || \ |
| ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED2) || \ |
| ((__MODE__) == TIM_COUNTERMODE_CENTERALIGNED3)) |
| |
| #define IS_TIM_CLOCKDIVISION_DIV(__DIV__) (((__DIV__) == TIM_CLOCKDIVISION_DIV1) || \ |
| ((__DIV__) == TIM_CLOCKDIVISION_DIV2) || \ |
| ((__DIV__) == TIM_CLOCKDIVISION_DIV4)) |
| |
| #define IS_TIM_AUTORELOAD_PRELOAD(PRELOAD) (((PRELOAD) == TIM_AUTORELOAD_PRELOAD_DISABLE) || \ |
| ((PRELOAD) == TIM_AUTORELOAD_PRELOAD_ENABLE)) |
| |
| #define IS_TIM_FAST_STATE(__STATE__) (((__STATE__) == TIM_OCFAST_DISABLE) || \ |
| ((__STATE__) == TIM_OCFAST_ENABLE)) |
| |
| #define IS_TIM_OC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCPOLARITY_HIGH) || \ |
| ((__POLARITY__) == TIM_OCPOLARITY_LOW)) |
| |
| #define IS_TIM_OCN_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_OCNPOLARITY_HIGH) || \ |
| ((__POLARITY__) == TIM_OCNPOLARITY_LOW)) |
| |
| #define IS_TIM_OCIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCIDLESTATE_SET) || \ |
| ((__STATE__) == TIM_OCIDLESTATE_RESET)) |
| |
| #define IS_TIM_OCNIDLE_STATE(__STATE__) (((__STATE__) == TIM_OCNIDLESTATE_SET) || \ |
| ((__STATE__) == TIM_OCNIDLESTATE_RESET)) |
| |
| #define IS_TIM_ENCODERINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_RISING) || \ |
| ((__POLARITY__) == TIM_ENCODERINPUTPOLARITY_FALLING)) |
| |
| #define IS_TIM_IC_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_ICPOLARITY_RISING) || \ |
| ((__POLARITY__) == TIM_ICPOLARITY_FALLING) || \ |
| ((__POLARITY__) == TIM_ICPOLARITY_BOTHEDGE)) |
| |
| #define IS_TIM_IC_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_ICSELECTION_DIRECTTI) || \ |
| ((__SELECTION__) == TIM_ICSELECTION_INDIRECTTI) || \ |
| ((__SELECTION__) == TIM_ICSELECTION_TRC)) |
| |
| #define IS_TIM_IC_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_ICPSC_DIV1) || \ |
| ((__PRESCALER__) == TIM_ICPSC_DIV2) || \ |
| ((__PRESCALER__) == TIM_ICPSC_DIV4) || \ |
| ((__PRESCALER__) == TIM_ICPSC_DIV8)) |
| |
| #define IS_TIM_OPM_MODE(__MODE__) (((__MODE__) == TIM_OPMODE_SINGLE) || \ |
| ((__MODE__) == TIM_OPMODE_REPETITIVE)) |
| |
| #define IS_TIM_ENCODER_MODE(__MODE__) (((__MODE__) == TIM_ENCODERMODE_TI1) || \ |
| ((__MODE__) == TIM_ENCODERMODE_TI2) || \ |
| ((__MODE__) == TIM_ENCODERMODE_TI12)) |
| |
| #define IS_TIM_DMA_SOURCE(__SOURCE__) ((((__SOURCE__) & 0xFFFF80FFU) == 0x00000000U) && ((__SOURCE__) != 0x00000000U)) |
| |
| #define IS_TIM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ |
| ((__CHANNEL__) == TIM_CHANNEL_2) || \ |
| ((__CHANNEL__) == TIM_CHANNEL_3) || \ |
| ((__CHANNEL__) == TIM_CHANNEL_4) || \ |
| ((__CHANNEL__) == TIM_CHANNEL_ALL)) |
| |
| #define IS_TIM_OPM_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ |
| ((__CHANNEL__) == TIM_CHANNEL_2)) |
| |
| #define IS_TIM_COMPLEMENTARY_CHANNELS(__CHANNEL__) (((__CHANNEL__) == TIM_CHANNEL_1) || \ |
| ((__CHANNEL__) == TIM_CHANNEL_2) || \ |
| ((__CHANNEL__) == TIM_CHANNEL_3)) |
| |
| #define IS_TIM_CLOCKSOURCE(__CLOCK__) (((__CLOCK__) == TIM_CLOCKSOURCE_INTERNAL) || \ |
| ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE2) || \ |
| ((__CLOCK__) == TIM_CLOCKSOURCE_ITR0) || \ |
| ((__CLOCK__) == TIM_CLOCKSOURCE_ITR1) || \ |
| ((__CLOCK__) == TIM_CLOCKSOURCE_ITR2) || \ |
| ((__CLOCK__) == TIM_CLOCKSOURCE_ITR3) || \ |
| ((__CLOCK__) == TIM_CLOCKSOURCE_TI1ED) || \ |
| ((__CLOCK__) == TIM_CLOCKSOURCE_TI1) || \ |
| ((__CLOCK__) == TIM_CLOCKSOURCE_TI2) || \ |
| ((__CLOCK__) == TIM_CLOCKSOURCE_ETRMODE1)) |
| |
| #define IS_TIM_CLOCKPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLOCKPOLARITY_INVERTED) || \ |
| ((__POLARITY__) == TIM_CLOCKPOLARITY_NONINVERTED) || \ |
| ((__POLARITY__) == TIM_CLOCKPOLARITY_RISING) || \ |
| ((__POLARITY__) == TIM_CLOCKPOLARITY_FALLING) || \ |
| ((__POLARITY__) == TIM_CLOCKPOLARITY_BOTHEDGE)) |
| |
| #define IS_TIM_CLOCKPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV1) || \ |
| ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV2) || \ |
| ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV4) || \ |
| ((__PRESCALER__) == TIM_CLOCKPRESCALER_DIV8)) |
| |
| #define IS_TIM_CLOCKFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) |
| |
| #define IS_TIM_CLEARINPUT_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ |
| ((__POLARITY__) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) |
| |
| #define IS_TIM_CLEARINPUT_PRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV1) || \ |
| ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV2) || \ |
| ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV4) || \ |
| ((__PRESCALER__) == TIM_CLEARINPUTPRESCALER_DIV8)) |
| |
| #define IS_TIM_CLEARINPUT_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) |
| |
| #define IS_TIM_OSSR_STATE(__STATE__) (((__STATE__) == TIM_OSSR_ENABLE) || \ |
| ((__STATE__) == TIM_OSSR_DISABLE)) |
| |
| #define IS_TIM_OSSI_STATE(__STATE__) (((__STATE__) == TIM_OSSI_ENABLE) || \ |
| ((__STATE__) == TIM_OSSI_DISABLE)) |
| |
| #define IS_TIM_LOCK_LEVEL(__LEVEL__) (((__LEVEL__) == TIM_LOCKLEVEL_OFF) || \ |
| ((__LEVEL__) == TIM_LOCKLEVEL_1) || \ |
| ((__LEVEL__) == TIM_LOCKLEVEL_2) || \ |
| ((__LEVEL__) == TIM_LOCKLEVEL_3)) |
| |
| #define IS_TIM_BREAK_FILTER(__BRKFILTER__) ((__BRKFILTER__) <= 0xFUL) |
| |
| |
| #define IS_TIM_BREAK_STATE(__STATE__) (((__STATE__) == TIM_BREAK_ENABLE) || \ |
| ((__STATE__) == TIM_BREAK_DISABLE)) |
| |
| #define IS_TIM_BREAK_POLARITY(__POLARITY__) (((__POLARITY__) == TIM_BREAKPOLARITY_LOW) || \ |
| ((__POLARITY__) == TIM_BREAKPOLARITY_HIGH)) |
| |
| #define IS_TIM_AUTOMATIC_OUTPUT_STATE(__STATE__) (((__STATE__) == TIM_AUTOMATICOUTPUT_ENABLE) || \ |
| ((__STATE__) == TIM_AUTOMATICOUTPUT_DISABLE)) |
| |
| #define IS_TIM_TRGO_SOURCE(__SOURCE__) (((__SOURCE__) == TIM_TRGO_RESET) || \ |
| ((__SOURCE__) == TIM_TRGO_ENABLE) || \ |
| ((__SOURCE__) == TIM_TRGO_UPDATE) || \ |
| ((__SOURCE__) == TIM_TRGO_OC1) || \ |
| ((__SOURCE__) == TIM_TRGO_OC1REF) || \ |
| ((__SOURCE__) == TIM_TRGO_OC2REF) || \ |
| ((__SOURCE__) == TIM_TRGO_OC3REF) || \ |
| ((__SOURCE__) == TIM_TRGO_OC4REF)) |
| |
| #define IS_TIM_MSM_STATE(__STATE__) (((__STATE__) == TIM_MASTERSLAVEMODE_ENABLE) || \ |
| ((__STATE__) == TIM_MASTERSLAVEMODE_DISABLE)) |
| |
| #define IS_TIM_SLAVE_MODE(__MODE__) (((__MODE__) == TIM_SLAVEMODE_DISABLE) || \ |
| ((__MODE__) == TIM_SLAVEMODE_RESET) || \ |
| ((__MODE__) == TIM_SLAVEMODE_GATED) || \ |
| ((__MODE__) == TIM_SLAVEMODE_TRIGGER) || \ |
| ((__MODE__) == TIM_SLAVEMODE_EXTERNAL1)) |
| |
| #define IS_TIM_PWM_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_PWM1) || \ |
| ((__MODE__) == TIM_OCMODE_PWM2)) |
| |
| #define IS_TIM_OC_MODE(__MODE__) (((__MODE__) == TIM_OCMODE_TIMING) || \ |
| ((__MODE__) == TIM_OCMODE_ACTIVE) || \ |
| ((__MODE__) == TIM_OCMODE_INACTIVE) || \ |
| ((__MODE__) == TIM_OCMODE_TOGGLE) || \ |
| ((__MODE__) == TIM_OCMODE_FORCED_ACTIVE) || \ |
| ((__MODE__) == TIM_OCMODE_FORCED_INACTIVE)) |
| |
| #define IS_TIM_TRIGGER_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ |
| ((__SELECTION__) == TIM_TS_ITR1) || \ |
| ((__SELECTION__) == TIM_TS_ITR2) || \ |
| ((__SELECTION__) == TIM_TS_ITR3) || \ |
| ((__SELECTION__) == TIM_TS_TI1F_ED) || \ |
| ((__SELECTION__) == TIM_TS_TI1FP1) || \ |
| ((__SELECTION__) == TIM_TS_TI2FP2) || \ |
| ((__SELECTION__) == TIM_TS_ETRF)) |
| |
| #define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(__SELECTION__) (((__SELECTION__) == TIM_TS_ITR0) || \ |
| ((__SELECTION__) == TIM_TS_ITR1) || \ |
| ((__SELECTION__) == TIM_TS_ITR2) || \ |
| ((__SELECTION__) == TIM_TS_ITR3) || \ |
| ((__SELECTION__) == TIM_TS_NONE)) |
| |
| #define IS_TIM_TRIGGERPOLARITY(__POLARITY__) (((__POLARITY__) == TIM_TRIGGERPOLARITY_INVERTED ) || \ |
| ((__POLARITY__) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ |
| ((__POLARITY__) == TIM_TRIGGERPOLARITY_RISING ) || \ |
| ((__POLARITY__) == TIM_TRIGGERPOLARITY_FALLING ) || \ |
| ((__POLARITY__) == TIM_TRIGGERPOLARITY_BOTHEDGE )) |
| |
| #define IS_TIM_TRIGGERPRESCALER(__PRESCALER__) (((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV1) || \ |
| ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV2) || \ |
| ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV4) || \ |
| ((__PRESCALER__) == TIM_TRIGGERPRESCALER_DIV8)) |
| |
| #define IS_TIM_TRIGGERFILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) |
| |
| #define IS_TIM_TI1SELECTION(__TI1SELECTION__) (((__TI1SELECTION__) == TIM_TI1SELECTION_CH1) || \ |
| ((__TI1SELECTION__) == TIM_TI1SELECTION_XORCOMBINATION)) |
| |
| #define IS_TIM_DMA_LENGTH(__LENGTH__) (((__LENGTH__) == TIM_DMABURSTLENGTH_1TRANSFER) || \ |
| ((__LENGTH__) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ |
| ((__LENGTH__) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ |
| ((__LENGTH__) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ |
| ((__LENGTH__) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ |
| ((__LENGTH__) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ |
| ((__LENGTH__) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ |
| ((__LENGTH__) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ |
| ((__LENGTH__) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ |
| ((__LENGTH__) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ |
| ((__LENGTH__) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ |
| ((__LENGTH__) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ |
| ((__LENGTH__) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ |
| ((__LENGTH__) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ |
| ((__LENGTH__) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ |
| ((__LENGTH__) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ |
| ((__LENGTH__) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ |
| ((__LENGTH__) == TIM_DMABURSTLENGTH_18TRANSFERS)) |
| |
| #define IS_TIM_DMA_DATA_LENGTH(LENGTH) (((LENGTH) >= 0x1U) && ((LENGTH) < 0x10000U)) |
| |
| #define IS_TIM_IC_FILTER(__ICFILTER__) ((__ICFILTER__) <= 0xFU) |
| |
| #define IS_TIM_DEADTIME(__DEADTIME__) ((__DEADTIME__) <= 0xFFU) |
| |
| #define IS_TIM_SLAVEMODE_TRIGGER_ENABLED(__TRIGGER__) ((__TRIGGER__) == TIM_SLAVEMODE_TRIGGER) |
| |
| #define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ |
| (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8U)) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ |
| ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8U))) |
| |
| #define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ |
| (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC) :\ |
| ((__HANDLE__)->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC)) |
| |
| #define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ |
| (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4U)) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8U)) :\ |
| ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12U)))) |
| |
| #define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ |
| (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ |
| ((__HANDLE__)->Instance->CCER &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP))) |
| |
| #define TIM_CHANNEL_STATE_GET(__HANDLE__, __CHANNEL__)\ |
| (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelState[0] :\ |
| ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelState[1] :\ |
| ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelState[2] :\ |
| (__HANDLE__)->ChannelState[3]) |
| |
| #define TIM_CHANNEL_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ |
| (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__)) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__)) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__)) :\ |
| ((__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__))) |
| |
| #define TIM_CHANNEL_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ |
| (__HANDLE__)->ChannelState[0] = (__CHANNEL_STATE__); \ |
| (__HANDLE__)->ChannelState[1] = (__CHANNEL_STATE__); \ |
| (__HANDLE__)->ChannelState[2] = (__CHANNEL_STATE__); \ |
| (__HANDLE__)->ChannelState[3] = (__CHANNEL_STATE__); \ |
| } while(0) |
| |
| #define TIM_CHANNEL_N_STATE_GET(__HANDLE__, __CHANNEL__)\ |
| (((__CHANNEL__) == TIM_CHANNEL_1) ? (__HANDLE__)->ChannelNState[0] :\ |
| ((__CHANNEL__) == TIM_CHANNEL_2) ? (__HANDLE__)->ChannelNState[1] :\ |
| ((__CHANNEL__) == TIM_CHANNEL_3) ? (__HANDLE__)->ChannelNState[2] :\ |
| (__HANDLE__)->ChannelNState[3]) |
| |
| #define TIM_CHANNEL_N_STATE_SET(__HANDLE__, __CHANNEL__, __CHANNEL_STATE__) \ |
| (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->ChannelNState[0] = (__CHANNEL_STATE__)) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->ChannelNState[1] = (__CHANNEL_STATE__)) :\ |
| ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->ChannelNState[2] = (__CHANNEL_STATE__)) :\ |
| ((__HANDLE__)->ChannelNState[3] = (__CHANNEL_STATE__))) |
| |
| #define TIM_CHANNEL_N_STATE_SET_ALL(__HANDLE__, __CHANNEL_STATE__) do { \ |
| (__HANDLE__)->ChannelNState[0] = \ |
| (__CHANNEL_STATE__); \ |
| (__HANDLE__)->ChannelNState[1] = \ |
| (__CHANNEL_STATE__); \ |
| (__HANDLE__)->ChannelNState[2] = \ |
| (__CHANNEL_STATE__); \ |
| (__HANDLE__)->ChannelNState[3] = \ |
| (__CHANNEL_STATE__); \ |
| } while(0) |
| |
| /** |
| * @} |
| */ |
| /* End of private macros -----------------------------------------------------*/ |
| |
| /* Include TIM HAL Extended module */ |
| #include "stm32f2xx_hal_tim_ex.h" |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup TIM_Exported_Functions TIM Exported Functions |
| * @{ |
| */ |
| |
| /** @addtogroup TIM_Exported_Functions_Group1 TIM Time Base functions |
| * @brief Time Base functions |
| * @{ |
| */ |
| /* Time Base functions ********************************************************/ |
| HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); |
| HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); |
| void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); |
| void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); |
| /* Blocking mode: Polling */ |
| HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); |
| HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); |
| /* Non-Blocking mode: Interrupt */ |
| HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); |
| HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); |
| /* Non-Blocking mode: DMA */ |
| HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); |
| HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup TIM_Exported_Functions_Group2 TIM Output Compare functions |
| * @brief TIM Output Compare functions |
| * @{ |
| */ |
| /* Timer Output Compare functions *********************************************/ |
| HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); |
| HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); |
| void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); |
| void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); |
| /* Blocking mode: Polling */ |
| HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /* Non-Blocking mode: Interrupt */ |
| HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /* Non-Blocking mode: DMA */ |
| HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); |
| HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup TIM_Exported_Functions_Group3 TIM PWM functions |
| * @brief TIM PWM functions |
| * @{ |
| */ |
| /* Timer PWM functions ********************************************************/ |
| HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); |
| HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); |
| void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); |
| void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); |
| /* Blocking mode: Polling */ |
| HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /* Non-Blocking mode: Interrupt */ |
| HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /* Non-Blocking mode: DMA */ |
| HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); |
| HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup TIM_Exported_Functions_Group4 TIM Input Capture functions |
| * @brief TIM Input Capture functions |
| * @{ |
| */ |
| /* Timer Input Capture functions **********************************************/ |
| HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); |
| HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); |
| void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); |
| void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); |
| /* Blocking mode: Polling */ |
| HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /* Non-Blocking mode: Interrupt */ |
| HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /* Non-Blocking mode: DMA */ |
| HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); |
| HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup TIM_Exported_Functions_Group5 TIM One Pulse functions |
| * @brief TIM One Pulse functions |
| * @{ |
| */ |
| /* Timer One Pulse functions **************************************************/ |
| HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); |
| HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); |
| void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); |
| void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); |
| /* Blocking mode: Polling */ |
| HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); |
| HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); |
| /* Non-Blocking mode: Interrupt */ |
| HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); |
| HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup TIM_Exported_Functions_Group6 TIM Encoder functions |
| * @brief TIM Encoder functions |
| * @{ |
| */ |
| /* Timer Encoder functions ****************************************************/ |
| HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef *sConfig); |
| HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); |
| void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); |
| void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); |
| /* Blocking mode: Polling */ |
| HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /* Non-Blocking mode: Interrupt */ |
| HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /* Non-Blocking mode: DMA */ |
| HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, |
| uint32_t *pData2, uint16_t Length); |
| HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup TIM_Exported_Functions_Group7 TIM IRQ handler management |
| * @brief IRQ handler management |
| * @{ |
| */ |
| /* Interrupt Handler functions ***********************************************/ |
| void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Exported_Functions_Group8 TIM Peripheral Control functions |
| * @brief Peripheral Control functions |
| * @{ |
| */ |
| /* Control functions *********************************************************/ |
| HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef *sConfig, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef *sConfig, uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef *sConfig, |
| uint32_t OutputChannel, uint32_t InputChannel); |
| HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef *sClearInputConfig, |
| uint32_t Channel); |
| HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef *sClockSourceConfig); |
| HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); |
| HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); |
| HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchro_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef *sSlaveConfig); |
| HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, |
| uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); |
| HAL_StatusTypeDef HAL_TIM_DMABurst_MultiWriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, |
| uint32_t BurstRequestSrc, uint32_t *BurstBuffer, |
| uint32_t BurstLength, uint32_t DataLength); |
| HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); |
| HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, |
| uint32_t BurstRequestSrc, uint32_t *BurstBuffer, uint32_t BurstLength); |
| HAL_StatusTypeDef HAL_TIM_DMABurst_MultiReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, |
| uint32_t BurstRequestSrc, uint32_t *BurstBuffer, |
| uint32_t BurstLength, uint32_t DataLength); |
| HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); |
| HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); |
| uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel); |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions |
| * @brief TIM Callbacks functions |
| * @{ |
| */ |
| /* Callback in non blocking modes (Interrupt and DMA) *************************/ |
| void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); |
| void HAL_TIM_PeriodElapsedHalfCpltCallback(TIM_HandleTypeDef *htim); |
| void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); |
| void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); |
| void HAL_TIM_IC_CaptureHalfCpltCallback(TIM_HandleTypeDef *htim); |
| void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); |
| void HAL_TIM_PWM_PulseFinishedHalfCpltCallback(TIM_HandleTypeDef *htim); |
| void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); |
| void HAL_TIM_TriggerHalfCpltCallback(TIM_HandleTypeDef *htim); |
| void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); |
| |
| /* Callbacks Register/UnRegister functions ***********************************/ |
| #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) |
| HAL_StatusTypeDef HAL_TIM_RegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID, |
| pTIM_CallbackTypeDef pCallback); |
| HAL_StatusTypeDef HAL_TIM_UnRegisterCallback(TIM_HandleTypeDef *htim, HAL_TIM_CallbackIDTypeDef CallbackID); |
| #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_Exported_Functions_Group10 TIM Peripheral State functions |
| * @brief Peripheral State functions |
| * @{ |
| */ |
| /* Peripheral State functions ************************************************/ |
| HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim); |
| HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim); |
| HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim); |
| HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim); |
| HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim); |
| HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim); |
| |
| /* Peripheral Channel state functions ************************************************/ |
| HAL_TIM_ActiveChannel HAL_TIM_GetActiveChannel(TIM_HandleTypeDef *htim); |
| HAL_TIM_ChannelStateTypeDef HAL_TIM_GetChannelState(TIM_HandleTypeDef *htim, uint32_t Channel); |
| HAL_TIM_DMABurstStateTypeDef HAL_TIM_DMABurstState(TIM_HandleTypeDef *htim); |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| /* End of exported functions -------------------------------------------------*/ |
| |
| /* Private functions----------------------------------------------------------*/ |
| /** @defgroup TIM_Private_Functions TIM Private Functions |
| * @{ |
| */ |
| void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure); |
| void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); |
| void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); |
| void TIM_ETR_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ExtTRGPrescaler, |
| uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter); |
| |
| void TIM_DMADelayPulseHalfCplt(DMA_HandleTypeDef *hdma); |
| void TIM_DMAError(DMA_HandleTypeDef *hdma); |
| void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); |
| void TIM_DMACaptureHalfCplt(DMA_HandleTypeDef *hdma); |
| void TIM_CCxChannelCmd(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ChannelState); |
| |
| #if (USE_HAL_TIM_REGISTER_CALLBACKS == 1) |
| void TIM_ResetCallback(TIM_HandleTypeDef *htim); |
| #endif /* USE_HAL_TIM_REGISTER_CALLBACKS */ |
| |
| /** |
| * @} |
| */ |
| /* End of private functions --------------------------------------------------*/ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* STM32F2xx_HAL_TIM_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |