| /** |
| ****************************************************************************** |
| * @file stm32f2xx_hal_crc.c |
| * @author MCD Application Team |
| * @brief CRC HAL module driver. |
| * This file provides firmware functions to manage the following |
| * functionalities of the Cyclic Redundancy Check (CRC) peripheral: |
| * + Initialization and de-initialization functions |
| * + Peripheral Control functions |
| * + Peripheral State functions |
| * |
| @verbatim |
| =============================================================================== |
| ##### How to use this driver ##### |
| =============================================================================== |
| [..] |
| (+) Enable CRC AHB clock using __HAL_RCC_CRC_CLK_ENABLE(); |
| (+) Initialize CRC calculator |
| (++) specify generating polynomial (peripheral default or non-default one) |
| (++) specify initialization value (peripheral default or non-default one) |
| (++) specify input data format |
| (++) specify input or output data inversion mode if any |
| (+) Use HAL_CRC_Accumulate() function to compute the CRC value of the |
| input data buffer starting with the previously computed CRC as |
| initialization value |
| (+) Use HAL_CRC_Calculate() function to compute the CRC value of the |
| input data buffer starting with the defined initialization value |
| (default or non-default) to initiate CRC calculation |
| |
| @endverbatim |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2017 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f2xx_hal.h" |
| |
| /** @addtogroup STM32F2xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @defgroup CRC CRC |
| * @brief CRC HAL module driver. |
| * @{ |
| */ |
| |
| #ifdef HAL_CRC_MODULE_ENABLED |
| |
| /* Private typedef -----------------------------------------------------------*/ |
| /* Private define ------------------------------------------------------------*/ |
| /* Private macro -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private function prototypes -----------------------------------------------*/ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| |
| /** @defgroup CRC_Exported_Functions CRC Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions |
| * @brief Initialization and Configuration functions. |
| * |
| @verbatim |
| =============================================================================== |
| ##### Initialization and de-initialization functions ##### |
| =============================================================================== |
| [..] This section provides functions allowing to: |
| (+) Initialize the CRC according to the specified parameters |
| in the CRC_InitTypeDef and create the associated handle |
| (+) DeInitialize the CRC peripheral |
| (+) Initialize the CRC MSP (MCU Specific Package) |
| (+) DeInitialize the CRC MSP |
| |
| @endverbatim |
| * @{ |
| */ |
| |
| /** |
| * @brief Initialize the CRC according to the specified |
| * parameters in the CRC_InitTypeDef and create the associated handle. |
| * @param hcrc CRC handle |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc) |
| { |
| /* Check the CRC handle allocation */ |
| if (hcrc == NULL) |
| { |
| return HAL_ERROR; |
| } |
| |
| /* Check the parameters */ |
| assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); |
| |
| if (hcrc->State == HAL_CRC_STATE_RESET) |
| { |
| /* Allocate lock resource and initialize it */ |
| hcrc->Lock = HAL_UNLOCKED; |
| /* Init the low level hardware */ |
| HAL_CRC_MspInit(hcrc); |
| } |
| |
| /* Change CRC peripheral state */ |
| hcrc->State = HAL_CRC_STATE_READY; |
| |
| /* Return function status */ |
| return HAL_OK; |
| } |
| |
| /** |
| * @brief DeInitialize the CRC peripheral. |
| * @param hcrc CRC handle |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc) |
| { |
| /* Check the CRC handle allocation */ |
| if (hcrc == NULL) |
| { |
| return HAL_ERROR; |
| } |
| |
| /* Check the parameters */ |
| assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance)); |
| |
| /* Check the CRC peripheral state */ |
| if (hcrc->State == HAL_CRC_STATE_BUSY) |
| { |
| return HAL_BUSY; |
| } |
| |
| /* Change CRC peripheral state */ |
| hcrc->State = HAL_CRC_STATE_BUSY; |
| |
| /* Reset CRC calculation unit */ |
| __HAL_CRC_DR_RESET(hcrc); |
| |
| /* Reset IDR register content */ |
| CLEAR_BIT(hcrc->Instance->IDR, CRC_IDR_IDR); |
| |
| /* DeInit the low level hardware */ |
| HAL_CRC_MspDeInit(hcrc); |
| |
| /* Change CRC peripheral state */ |
| hcrc->State = HAL_CRC_STATE_RESET; |
| |
| /* Process unlocked */ |
| __HAL_UNLOCK(hcrc); |
| |
| /* Return function status */ |
| return HAL_OK; |
| } |
| |
| /** |
| * @brief Initializes the CRC MSP. |
| * @param hcrc CRC handle |
| * @retval None |
| */ |
| __weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc) |
| { |
| /* Prevent unused argument(s) compilation warning */ |
| UNUSED(hcrc); |
| |
| /* NOTE : This function should not be modified, when the callback is needed, |
| the HAL_CRC_MspInit can be implemented in the user file |
| */ |
| } |
| |
| /** |
| * @brief DeInitialize the CRC MSP. |
| * @param hcrc CRC handle |
| * @retval None |
| */ |
| __weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc) |
| { |
| /* Prevent unused argument(s) compilation warning */ |
| UNUSED(hcrc); |
| |
| /* NOTE : This function should not be modified, when the callback is needed, |
| the HAL_CRC_MspDeInit can be implemented in the user file |
| */ |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions |
| * @brief management functions. |
| * |
| @verbatim |
| =============================================================================== |
| ##### Peripheral Control functions ##### |
| =============================================================================== |
| [..] This section provides functions allowing to: |
| (+) compute the 32-bit CRC value of a 32-bit data buffer |
| using combination of the previous CRC value and the new one. |
| |
| [..] or |
| |
| (+) compute the 32-bit CRC value of a 32-bit data buffer |
| independently of the previous CRC value. |
| |
| @endverbatim |
| * @{ |
| */ |
| |
| /** |
| * @brief Compute the 32-bit CRC value of a 32-bit data buffer |
| * starting with the previously computed CRC as initialization value. |
| * @param hcrc CRC handle |
| * @param pBuffer pointer to the input data buffer. |
| * @param BufferLength input data buffer length (number of uint32_t words). |
| * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) |
| */ |
| uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) |
| { |
| uint32_t index; /* CRC input data buffer index */ |
| uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */ |
| |
| /* Change CRC peripheral state */ |
| hcrc->State = HAL_CRC_STATE_BUSY; |
| |
| /* Enter Data to the CRC calculator */ |
| for (index = 0U; index < BufferLength; index++) |
| { |
| hcrc->Instance->DR = pBuffer[index]; |
| } |
| temp = hcrc->Instance->DR; |
| |
| /* Change CRC peripheral state */ |
| hcrc->State = HAL_CRC_STATE_READY; |
| |
| /* Return the CRC computed value */ |
| return temp; |
| } |
| |
| /** |
| * @brief Compute the 32-bit CRC value of a 32-bit data buffer |
| * starting with hcrc->Instance->INIT as initialization value. |
| * @param hcrc CRC handle |
| * @param pBuffer pointer to the input data buffer. |
| * @param BufferLength input data buffer length (number of uint32_t words). |
| * @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits) |
| */ |
| uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength) |
| { |
| uint32_t index; /* CRC input data buffer index */ |
| uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */ |
| |
| /* Change CRC peripheral state */ |
| hcrc->State = HAL_CRC_STATE_BUSY; |
| |
| /* Reset CRC Calculation Unit (hcrc->Instance->INIT is |
| * written in hcrc->Instance->DR) */ |
| __HAL_CRC_DR_RESET(hcrc); |
| |
| /* Enter 32-bit input data to the CRC calculator */ |
| for (index = 0U; index < BufferLength; index++) |
| { |
| hcrc->Instance->DR = pBuffer[index]; |
| } |
| temp = hcrc->Instance->DR; |
| |
| /* Change CRC peripheral state */ |
| hcrc->State = HAL_CRC_STATE_READY; |
| |
| /* Return the CRC computed value */ |
| return temp; |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions |
| * @brief Peripheral State functions. |
| * |
| @verbatim |
| =============================================================================== |
| ##### Peripheral State functions ##### |
| =============================================================================== |
| [..] |
| This subsection permits to get in run-time the status of the peripheral. |
| |
| @endverbatim |
| * @{ |
| */ |
| |
| /** |
| * @brief Return the CRC handle state. |
| * @param hcrc CRC handle |
| * @retval HAL state |
| */ |
| HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc) |
| { |
| /* Return CRC handle state */ |
| return hcrc->State; |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| #endif /* HAL_CRC_MODULE_ENABLED */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |