blob: f23e416c35226fc20ca1f312993c9224ff116dc4 [file] [log] [blame]
/**
******************************************************************************
* @file stm32f2xx_ll_cortex.h
* @author MCD Application Team
* @brief Header file of CORTEX LL module.
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
The LL CORTEX driver contains a set of generic APIs that can be
used by user:
(+) SYSTICK configuration used by @ref LL_mDelay and @ref LL_Init1msTick
functions
(+) Low power mode configuration (SCB register of Cortex-MCU)
(+) MPU API to configure and enable regions
(MPU services provided only on some devices)
(+) API to access to MCU info (CPUID register)
(+) API to enable fault handler (SHCSR accesses)
@endverbatim
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F2xx_LL_CORTEX_H
#define __STM32F2xx_LL_CORTEX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f2xx.h"
/** @addtogroup STM32F2xx_LL_Driver
* @{
*/
/** @defgroup CORTEX_LL CORTEX
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup CORTEX_LL_Exported_Constants CORTEX Exported Constants
* @{
*/
/** @defgroup CORTEX_LL_EC_CLKSOURCE_HCLK SYSTICK Clock Source
* @{
*/
#define LL_SYSTICK_CLKSOURCE_HCLK_DIV8 0x00000000U /*!< AHB clock divided by 8 selected as SysTick clock source.*/
#define LL_SYSTICK_CLKSOURCE_HCLK SysTick_CTRL_CLKSOURCE_Msk /*!< AHB clock selected as SysTick clock source. */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_FAULT Handler Fault type
* @{
*/
#define LL_HANDLER_FAULT_USG SCB_SHCSR_USGFAULTENA_Msk /*!< Usage fault */
#define LL_HANDLER_FAULT_BUS SCB_SHCSR_BUSFAULTENA_Msk /*!< Bus fault */
#define LL_HANDLER_FAULT_MEM SCB_SHCSR_MEMFAULTENA_Msk /*!< Memory management fault */
/**
* @}
*/
#if __MPU_PRESENT
/** @defgroup CORTEX_LL_EC_CTRL_HFNMI_PRIVDEF MPU Control
* @{
*/
#define LL_MPU_CTRL_HFNMI_PRIVDEF_NONE 0x00000000U /*!< Disable NMI and privileged SW access */
#define LL_MPU_CTRL_HARDFAULT_NMI MPU_CTRL_HFNMIENA_Msk /*!< Enables the operation of MPU during hard fault, NMI, and FAULTMASK handlers */
#define LL_MPU_CTRL_PRIVILEGED_DEFAULT MPU_CTRL_PRIVDEFENA_Msk /*!< Enable privileged software access to default memory map */
#define LL_MPU_CTRL_HFNMI_PRIVDEF (MPU_CTRL_HFNMIENA_Msk | MPU_CTRL_PRIVDEFENA_Msk) /*!< Enable NMI and privileged SW access */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_REGION MPU Region Number
* @{
*/
#define LL_MPU_REGION_NUMBER0 0x00U /*!< REGION Number 0 */
#define LL_MPU_REGION_NUMBER1 0x01U /*!< REGION Number 1 */
#define LL_MPU_REGION_NUMBER2 0x02U /*!< REGION Number 2 */
#define LL_MPU_REGION_NUMBER3 0x03U /*!< REGION Number 3 */
#define LL_MPU_REGION_NUMBER4 0x04U /*!< REGION Number 4 */
#define LL_MPU_REGION_NUMBER5 0x05U /*!< REGION Number 5 */
#define LL_MPU_REGION_NUMBER6 0x06U /*!< REGION Number 6 */
#define LL_MPU_REGION_NUMBER7 0x07U /*!< REGION Number 7 */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_REGION_SIZE MPU Region Size
* @{
*/
#define LL_MPU_REGION_SIZE_32B (0x04U << MPU_RASR_SIZE_Pos) /*!< 32B Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_64B (0x05U << MPU_RASR_SIZE_Pos) /*!< 64B Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_128B (0x06U << MPU_RASR_SIZE_Pos) /*!< 128B Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_256B (0x07U << MPU_RASR_SIZE_Pos) /*!< 256B Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_512B (0x08U << MPU_RASR_SIZE_Pos) /*!< 512B Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_1KB (0x09U << MPU_RASR_SIZE_Pos) /*!< 1KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_2KB (0x0AU << MPU_RASR_SIZE_Pos) /*!< 2KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_4KB (0x0BU << MPU_RASR_SIZE_Pos) /*!< 4KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_8KB (0x0CU << MPU_RASR_SIZE_Pos) /*!< 8KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_16KB (0x0DU << MPU_RASR_SIZE_Pos) /*!< 16KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_32KB (0x0EU << MPU_RASR_SIZE_Pos) /*!< 32KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_64KB (0x0FU << MPU_RASR_SIZE_Pos) /*!< 64KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_128KB (0x10U << MPU_RASR_SIZE_Pos) /*!< 128KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_256KB (0x11U << MPU_RASR_SIZE_Pos) /*!< 256KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_512KB (0x12U << MPU_RASR_SIZE_Pos) /*!< 512KB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_1MB (0x13U << MPU_RASR_SIZE_Pos) /*!< 1MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_2MB (0x14U << MPU_RASR_SIZE_Pos) /*!< 2MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_4MB (0x15U << MPU_RASR_SIZE_Pos) /*!< 4MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_8MB (0x16U << MPU_RASR_SIZE_Pos) /*!< 8MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_16MB (0x17U << MPU_RASR_SIZE_Pos) /*!< 16MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_32MB (0x18U << MPU_RASR_SIZE_Pos) /*!< 32MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_64MB (0x19U << MPU_RASR_SIZE_Pos) /*!< 64MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_128MB (0x1AU << MPU_RASR_SIZE_Pos) /*!< 128MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_256MB (0x1BU << MPU_RASR_SIZE_Pos) /*!< 256MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_512MB (0x1CU << MPU_RASR_SIZE_Pos) /*!< 512MB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_1GB (0x1DU << MPU_RASR_SIZE_Pos) /*!< 1GB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_2GB (0x1EU << MPU_RASR_SIZE_Pos) /*!< 2GB Size of the MPU protection region */
#define LL_MPU_REGION_SIZE_4GB (0x1FU << MPU_RASR_SIZE_Pos) /*!< 4GB Size of the MPU protection region */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_REGION_PRIVILEDGES MPU Region Privileges
* @{
*/
#define LL_MPU_REGION_NO_ACCESS (0x00U << MPU_RASR_AP_Pos) /*!< No access*/
#define LL_MPU_REGION_PRIV_RW (0x01U << MPU_RASR_AP_Pos) /*!< RW privileged (privileged access only)*/
#define LL_MPU_REGION_PRIV_RW_URO (0x02U << MPU_RASR_AP_Pos) /*!< RW privileged - RO user (Write in a user program generates a fault) */
#define LL_MPU_REGION_FULL_ACCESS (0x03U << MPU_RASR_AP_Pos) /*!< RW privileged & user (Full access) */
#define LL_MPU_REGION_PRIV_RO (0x05U << MPU_RASR_AP_Pos) /*!< RO privileged (privileged read only)*/
#define LL_MPU_REGION_PRIV_RO_URO (0x06U << MPU_RASR_AP_Pos) /*!< RO privileged & user (read only) */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_TEX MPU TEX Level
* @{
*/
#define LL_MPU_TEX_LEVEL0 (0x00U << MPU_RASR_TEX_Pos) /*!< b000 for TEX bits */
#define LL_MPU_TEX_LEVEL1 (0x01U << MPU_RASR_TEX_Pos) /*!< b001 for TEX bits */
#define LL_MPU_TEX_LEVEL2 (0x02U << MPU_RASR_TEX_Pos) /*!< b010 for TEX bits */
#define LL_MPU_TEX_LEVEL4 (0x04U << MPU_RASR_TEX_Pos) /*!< b100 for TEX bits */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_INSTRUCTION_ACCESS MPU Instruction Access
* @{
*/
#define LL_MPU_INSTRUCTION_ACCESS_ENABLE 0x00U /*!< Instruction fetches enabled */
#define LL_MPU_INSTRUCTION_ACCESS_DISABLE MPU_RASR_XN_Msk /*!< Instruction fetches disabled*/
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_SHAREABLE_ACCESS MPU Shareable Access
* @{
*/
#define LL_MPU_ACCESS_SHAREABLE MPU_RASR_S_Msk /*!< Shareable memory attribute */
#define LL_MPU_ACCESS_NOT_SHAREABLE 0x00U /*!< Not Shareable memory attribute */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_CACHEABLE_ACCESS MPU Cacheable Access
* @{
*/
#define LL_MPU_ACCESS_CACHEABLE MPU_RASR_C_Msk /*!< Cacheable memory attribute */
#define LL_MPU_ACCESS_NOT_CACHEABLE 0x00U /*!< Not Cacheable memory attribute */
/**
* @}
*/
/** @defgroup CORTEX_LL_EC_BUFFERABLE_ACCESS MPU Bufferable Access
* @{
*/
#define LL_MPU_ACCESS_BUFFERABLE MPU_RASR_B_Msk /*!< Bufferable memory attribute */
#define LL_MPU_ACCESS_NOT_BUFFERABLE 0x00U /*!< Not Bufferable memory attribute */
/**
* @}
*/
#endif /* __MPU_PRESENT */
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup CORTEX_LL_Exported_Functions CORTEX Exported Functions
* @{
*/
/** @defgroup CORTEX_LL_EF_SYSTICK SYSTICK
* @{
*/
/**
* @brief This function checks if the Systick counter flag is active or not.
* @note It can be used in timeout function on application side.
* @rmtoll STK_CTRL COUNTFLAG LL_SYSTICK_IsActiveCounterFlag
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSTICK_IsActiveCounterFlag(void)
{
return ((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == (SysTick_CTRL_COUNTFLAG_Msk));
}
/**
* @brief Configures the SysTick clock source
* @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_SetClkSource
* @param Source This parameter can be one of the following values:
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
* @retval None
*/
__STATIC_INLINE void LL_SYSTICK_SetClkSource(uint32_t Source)
{
if (Source == LL_SYSTICK_CLKSOURCE_HCLK)
{
SET_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
}
else
{
CLEAR_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
}
}
/**
* @brief Get the SysTick clock source
* @rmtoll STK_CTRL CLKSOURCE LL_SYSTICK_GetClkSource
* @retval Returned value can be one of the following values:
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK_DIV8
* @arg @ref LL_SYSTICK_CLKSOURCE_HCLK
*/
__STATIC_INLINE uint32_t LL_SYSTICK_GetClkSource(void)
{
return READ_BIT(SysTick->CTRL, LL_SYSTICK_CLKSOURCE_HCLK);
}
/**
* @brief Enable SysTick exception request
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_EnableIT
* @retval None
*/
__STATIC_INLINE void LL_SYSTICK_EnableIT(void)
{
SET_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
}
/**
* @brief Disable SysTick exception request
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_DisableIT
* @retval None
*/
__STATIC_INLINE void LL_SYSTICK_DisableIT(void)
{
CLEAR_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk);
}
/**
* @brief Checks if the SYSTICK interrupt is enabled or disabled.
* @rmtoll STK_CTRL TICKINT LL_SYSTICK_IsEnabledIT
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSTICK_IsEnabledIT(void)
{
return (READ_BIT(SysTick->CTRL, SysTick_CTRL_TICKINT_Msk) == (SysTick_CTRL_TICKINT_Msk));
}
/**
* @}
*/
/** @defgroup CORTEX_LL_EF_LOW_POWER_MODE LOW POWER MODE
* @{
*/
/**
* @brief Processor uses sleep as its low power mode
* @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableSleep
* @retval None
*/
__STATIC_INLINE void LL_LPM_EnableSleep(void)
{
/* Clear SLEEPDEEP bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
}
/**
* @brief Processor uses deep sleep as its low power mode
* @rmtoll SCB_SCR SLEEPDEEP LL_LPM_EnableDeepSleep
* @retval None
*/
__STATIC_INLINE void LL_LPM_EnableDeepSleep(void)
{
/* Set SLEEPDEEP bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
}
/**
* @brief Configures sleep-on-exit when returning from Handler mode to Thread mode.
* @note Setting this bit to 1 enables an interrupt-driven application to avoid returning to an
* empty main application.
* @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_EnableSleepOnExit
* @retval None
*/
__STATIC_INLINE void LL_LPM_EnableSleepOnExit(void)
{
/* Set SLEEPONEXIT bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
}
/**
* @brief Do not sleep when returning to Thread mode.
* @rmtoll SCB_SCR SLEEPONEXIT LL_LPM_DisableSleepOnExit
* @retval None
*/
__STATIC_INLINE void LL_LPM_DisableSleepOnExit(void)
{
/* Clear SLEEPONEXIT bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
}
/**
* @brief Enabled events and all interrupts, including disabled interrupts, can wakeup the
* processor.
* @rmtoll SCB_SCR SEVEONPEND LL_LPM_EnableEventOnPend
* @retval None
*/
__STATIC_INLINE void LL_LPM_EnableEventOnPend(void)
{
/* Set SEVEONPEND bit of Cortex System Control Register */
SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
}
/**
* @brief Only enabled interrupts or events can wakeup the processor, disabled interrupts are
* excluded
* @rmtoll SCB_SCR SEVEONPEND LL_LPM_DisableEventOnPend
* @retval None
*/
__STATIC_INLINE void LL_LPM_DisableEventOnPend(void)
{
/* Clear SEVEONPEND bit of Cortex System Control Register */
CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
}
/**
* @}
*/
/** @defgroup CORTEX_LL_EF_HANDLER HANDLER
* @{
*/
/**
* @brief Enable a fault in System handler control register (SHCSR)
* @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_EnableFault
* @param Fault This parameter can be a combination of the following values:
* @arg @ref LL_HANDLER_FAULT_USG
* @arg @ref LL_HANDLER_FAULT_BUS
* @arg @ref LL_HANDLER_FAULT_MEM
* @retval None
*/
__STATIC_INLINE void LL_HANDLER_EnableFault(uint32_t Fault)
{
/* Enable the system handler fault */
SET_BIT(SCB->SHCSR, Fault);
}
/**
* @brief Disable a fault in System handler control register (SHCSR)
* @rmtoll SCB_SHCSR MEMFAULTENA LL_HANDLER_DisableFault
* @param Fault This parameter can be a combination of the following values:
* @arg @ref LL_HANDLER_FAULT_USG
* @arg @ref LL_HANDLER_FAULT_BUS
* @arg @ref LL_HANDLER_FAULT_MEM
* @retval None
*/
__STATIC_INLINE void LL_HANDLER_DisableFault(uint32_t Fault)
{
/* Disable the system handler fault */
CLEAR_BIT(SCB->SHCSR, Fault);
}
/**
* @}
*/
/** @defgroup CORTEX_LL_EF_MCU_INFO MCU INFO
* @{
*/
/**
* @brief Get Implementer code
* @rmtoll SCB_CPUID IMPLEMENTER LL_CPUID_GetImplementer
* @retval Value should be equal to 0x41 for ARM
*/
__STATIC_INLINE uint32_t LL_CPUID_GetImplementer(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_IMPLEMENTER_Msk) >> SCB_CPUID_IMPLEMENTER_Pos);
}
/**
* @brief Get Variant number (The r value in the rnpn product revision identifier)
* @rmtoll SCB_CPUID VARIANT LL_CPUID_GetVariant
* @retval Value between 0 and 255 (0x1: revision 1, 0x2: revision 2)
*/
__STATIC_INLINE uint32_t LL_CPUID_GetVariant(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_VARIANT_Msk) >> SCB_CPUID_VARIANT_Pos);
}
/**
* @brief Get Constant number
* @rmtoll SCB_CPUID ARCHITECTURE LL_CPUID_GetConstant
* @retval Value should be equal to 0xF for Cortex-M3 devices
*/
__STATIC_INLINE uint32_t LL_CPUID_GetConstant(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_ARCHITECTURE_Msk) >> SCB_CPUID_ARCHITECTURE_Pos);
}
/**
* @brief Get Part number
* @rmtoll SCB_CPUID PARTNO LL_CPUID_GetParNo
* @retval Value should be equal to 0xC23 for Cortex-M3
*/
__STATIC_INLINE uint32_t LL_CPUID_GetParNo(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_PARTNO_Msk) >> SCB_CPUID_PARTNO_Pos);
}
/**
* @brief Get Revision number (The p value in the rnpn product revision identifier, indicates patch release)
* @rmtoll SCB_CPUID REVISION LL_CPUID_GetRevision
* @retval Value between 0 and 255 (0x0: patch 0, 0x1: patch 1)
*/
__STATIC_INLINE uint32_t LL_CPUID_GetRevision(void)
{
return (uint32_t)(READ_BIT(SCB->CPUID, SCB_CPUID_REVISION_Msk) >> SCB_CPUID_REVISION_Pos);
}
/**
* @}
*/
#if __MPU_PRESENT
/** @defgroup CORTEX_LL_EF_MPU MPU
* @{
*/
/**
* @brief Enable MPU with input options
* @rmtoll MPU_CTRL ENABLE LL_MPU_Enable
* @param Options This parameter can be one of the following values:
* @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF_NONE
* @arg @ref LL_MPU_CTRL_HARDFAULT_NMI
* @arg @ref LL_MPU_CTRL_PRIVILEGED_DEFAULT
* @arg @ref LL_MPU_CTRL_HFNMI_PRIVDEF
* @retval None
*/
__STATIC_INLINE void LL_MPU_Enable(uint32_t Options)
{
/* Enable the MPU*/
WRITE_REG(MPU->CTRL, (MPU_CTRL_ENABLE_Msk | Options));
/* Ensure MPU settings take effects */
__DSB();
/* Sequence instruction fetches using update settings */
__ISB();
}
/**
* @brief Disable MPU
* @rmtoll MPU_CTRL ENABLE LL_MPU_Disable
* @retval None
*/
__STATIC_INLINE void LL_MPU_Disable(void)
{
/* Make sure outstanding transfers are done */
__DMB();
/* Disable MPU*/
WRITE_REG(MPU->CTRL, 0U);
}
/**
* @brief Check if MPU is enabled or not
* @rmtoll MPU_CTRL ENABLE LL_MPU_IsEnabled
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_MPU_IsEnabled(void)
{
return (READ_BIT(MPU->CTRL, MPU_CTRL_ENABLE_Msk) == (MPU_CTRL_ENABLE_Msk));
}
/**
* @brief Enable a MPU region
* @rmtoll MPU_RASR ENABLE LL_MPU_EnableRegion
* @param Region This parameter can be one of the following values:
* @arg @ref LL_MPU_REGION_NUMBER0
* @arg @ref LL_MPU_REGION_NUMBER1
* @arg @ref LL_MPU_REGION_NUMBER2
* @arg @ref LL_MPU_REGION_NUMBER3
* @arg @ref LL_MPU_REGION_NUMBER4
* @arg @ref LL_MPU_REGION_NUMBER5
* @arg @ref LL_MPU_REGION_NUMBER6
* @arg @ref LL_MPU_REGION_NUMBER7
* @retval None
*/
__STATIC_INLINE void LL_MPU_EnableRegion(uint32_t Region)
{
/* Set Region number */
WRITE_REG(MPU->RNR, Region);
/* Enable the MPU region */
SET_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
}
/**
* @brief Configure and enable a region
* @rmtoll MPU_RNR REGION LL_MPU_ConfigRegion\n
* MPU_RBAR REGION LL_MPU_ConfigRegion\n
* MPU_RBAR ADDR LL_MPU_ConfigRegion\n
* MPU_RASR XN LL_MPU_ConfigRegion\n
* MPU_RASR AP LL_MPU_ConfigRegion\n
* MPU_RASR S LL_MPU_ConfigRegion\n
* MPU_RASR C LL_MPU_ConfigRegion\n
* MPU_RASR B LL_MPU_ConfigRegion\n
* MPU_RASR SIZE LL_MPU_ConfigRegion
* @param Region This parameter can be one of the following values:
* @arg @ref LL_MPU_REGION_NUMBER0
* @arg @ref LL_MPU_REGION_NUMBER1
* @arg @ref LL_MPU_REGION_NUMBER2
* @arg @ref LL_MPU_REGION_NUMBER3
* @arg @ref LL_MPU_REGION_NUMBER4
* @arg @ref LL_MPU_REGION_NUMBER5
* @arg @ref LL_MPU_REGION_NUMBER6
* @arg @ref LL_MPU_REGION_NUMBER7
* @param Address Value of region base address
* @param SubRegionDisable Sub-region disable value between Min_Data = 0x00 and Max_Data = 0xFF
* @param Attributes This parameter can be a combination of the following values:
* @arg @ref LL_MPU_REGION_SIZE_32B or @ref LL_MPU_REGION_SIZE_64B or @ref LL_MPU_REGION_SIZE_128B or @ref LL_MPU_REGION_SIZE_256B or @ref LL_MPU_REGION_SIZE_512B
* or @ref LL_MPU_REGION_SIZE_1KB or @ref LL_MPU_REGION_SIZE_2KB or @ref LL_MPU_REGION_SIZE_4KB or @ref LL_MPU_REGION_SIZE_8KB or @ref LL_MPU_REGION_SIZE_16KB
* or @ref LL_MPU_REGION_SIZE_32KB or @ref LL_MPU_REGION_SIZE_64KB or @ref LL_MPU_REGION_SIZE_128KB or @ref LL_MPU_REGION_SIZE_256KB or @ref LL_MPU_REGION_SIZE_512KB
* or @ref LL_MPU_REGION_SIZE_1MB or @ref LL_MPU_REGION_SIZE_2MB or @ref LL_MPU_REGION_SIZE_4MB or @ref LL_MPU_REGION_SIZE_8MB or @ref LL_MPU_REGION_SIZE_16MB
* or @ref LL_MPU_REGION_SIZE_32MB or @ref LL_MPU_REGION_SIZE_64MB or @ref LL_MPU_REGION_SIZE_128MB or @ref LL_MPU_REGION_SIZE_256MB or @ref LL_MPU_REGION_SIZE_512MB
* or @ref LL_MPU_REGION_SIZE_1GB or @ref LL_MPU_REGION_SIZE_2GB or @ref LL_MPU_REGION_SIZE_4GB
* @arg @ref LL_MPU_REGION_NO_ACCESS or @ref LL_MPU_REGION_PRIV_RW or @ref LL_MPU_REGION_PRIV_RW_URO or @ref LL_MPU_REGION_FULL_ACCESS
* or @ref LL_MPU_REGION_PRIV_RO or @ref LL_MPU_REGION_PRIV_RO_URO
* @arg @ref LL_MPU_TEX_LEVEL0 or @ref LL_MPU_TEX_LEVEL1 or @ref LL_MPU_TEX_LEVEL2 or @ref LL_MPU_TEX_LEVEL4
* @arg @ref LL_MPU_INSTRUCTION_ACCESS_ENABLE or @ref LL_MPU_INSTRUCTION_ACCESS_DISABLE
* @arg @ref LL_MPU_ACCESS_SHAREABLE or @ref LL_MPU_ACCESS_NOT_SHAREABLE
* @arg @ref LL_MPU_ACCESS_CACHEABLE or @ref LL_MPU_ACCESS_NOT_CACHEABLE
* @arg @ref LL_MPU_ACCESS_BUFFERABLE or @ref LL_MPU_ACCESS_NOT_BUFFERABLE
* @retval None
*/
__STATIC_INLINE void LL_MPU_ConfigRegion(uint32_t Region, uint32_t SubRegionDisable, uint32_t Address, uint32_t Attributes)
{
/* Set Region number */
WRITE_REG(MPU->RNR, Region);
/* Set base address */
WRITE_REG(MPU->RBAR, (Address & 0xFFFFFFE0U));
/* Configure MPU */
WRITE_REG(MPU->RASR, (MPU_RASR_ENABLE_Msk | Attributes | SubRegionDisable << MPU_RASR_SRD_Pos));
}
/**
* @brief Disable a region
* @rmtoll MPU_RNR REGION LL_MPU_DisableRegion\n
* MPU_RASR ENABLE LL_MPU_DisableRegion
* @param Region This parameter can be one of the following values:
* @arg @ref LL_MPU_REGION_NUMBER0
* @arg @ref LL_MPU_REGION_NUMBER1
* @arg @ref LL_MPU_REGION_NUMBER2
* @arg @ref LL_MPU_REGION_NUMBER3
* @arg @ref LL_MPU_REGION_NUMBER4
* @arg @ref LL_MPU_REGION_NUMBER5
* @arg @ref LL_MPU_REGION_NUMBER6
* @arg @ref LL_MPU_REGION_NUMBER7
* @retval None
*/
__STATIC_INLINE void LL_MPU_DisableRegion(uint32_t Region)
{
/* Set Region number */
WRITE_REG(MPU->RNR, Region);
/* Disable the MPU region */
CLEAR_BIT(MPU->RASR, MPU_RASR_ENABLE_Msk);
}
/**
* @}
*/
#endif /* __MPU_PRESENT */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F2xx_LL_CORTEX_H */