[LL][RTC] Correct misleading note about shadow registers
diff --git a/Inc/stm32f2xx_ll_rtc.h b/Inc/stm32f2xx_ll_rtc.h
index 5ca0a5f..409dceb 100644
--- a/Inc/stm32f2xx_ll_rtc.h
+++ b/Inc/stm32f2xx_ll_rtc.h
@@ -935,7 +935,7 @@
/**
* @brief Get time format (AM or PM notation)
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
* shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -969,7 +969,7 @@
/**
* @brief Get Hours in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
* shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1004,7 +1004,7 @@
/**
* @brief Get Minutes in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
* shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1039,7 +1039,7 @@
/**
* @brief Get Seconds in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
* shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1089,7 +1089,7 @@
/**
* @brief Get time (hour, minute and second) in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
* shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1193,7 +1193,7 @@
/**
* @brief Get Year in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Year from BCD to Binary format
* @rmtoll DR YT LL_RTC_DATE_GetYear\n
@@ -1227,7 +1227,7 @@
/**
* @brief Get Week day
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @rmtoll DR WDU LL_RTC_DATE_GetWeekDay
* @param RTCx RTC Instance
@@ -1274,7 +1274,7 @@
/**
* @brief Get Month in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format
* @rmtoll DR MT LL_RTC_DATE_GetMonth\n
@@ -1316,7 +1316,7 @@
/**
* @brief Get Day in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format
* @rmtoll DR DT LL_RTC_DATE_GetDay\n
@@ -1378,7 +1378,7 @@
/**
* @brief Get date (WeekDay, Day, Month and Year) in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_YEAR, __LL_RTC_GET_MONTH,
* and __LL_RTC_GET_DAY are available to get independently each parameter.
