| /** |
| ****************************************************************************** |
| * @file stm32f2xx_ll_tim.h |
| * @author MCD Application Team |
| * @brief Header file of TIM LL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2016 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef __STM32F2xx_LL_TIM_H |
| #define __STM32F2xx_LL_TIM_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f2xx.h" |
| |
| /** @addtogroup STM32F2xx_LL_Driver |
| * @{ |
| */ |
| |
| #if defined (TIM1) || defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM5) || defined (TIM6) || defined (TIM7) || defined (TIM8) || defined (TIM9) || defined (TIM10) || defined (TIM11) || defined (TIM12) || defined (TIM13) || defined (TIM14) |
| |
| /** @defgroup TIM_LL TIM |
| * @{ |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /** @defgroup TIM_LL_Private_Variables TIM Private Variables |
| * @{ |
| */ |
| static const uint8_t OFFSET_TAB_CCMRx[] = |
| { |
| 0x00U, /* 0: TIMx_CH1 */ |
| 0x00U, /* 1: TIMx_CH1N */ |
| 0x00U, /* 2: TIMx_CH2 */ |
| 0x00U, /* 3: TIMx_CH2N */ |
| 0x04U, /* 4: TIMx_CH3 */ |
| 0x04U, /* 5: TIMx_CH3N */ |
| 0x04U /* 6: TIMx_CH4 */ |
| }; |
| |
| static const uint8_t SHIFT_TAB_OCxx[] = |
| { |
| 0U, /* 0: OC1M, OC1FE, OC1PE */ |
| 0U, /* 1: - NA */ |
| 8U, /* 2: OC2M, OC2FE, OC2PE */ |
| 0U, /* 3: - NA */ |
| 0U, /* 4: OC3M, OC3FE, OC3PE */ |
| 0U, /* 5: - NA */ |
| 8U /* 6: OC4M, OC4FE, OC4PE */ |
| }; |
| |
| static const uint8_t SHIFT_TAB_ICxx[] = |
| { |
| 0U, /* 0: CC1S, IC1PSC, IC1F */ |
| 0U, /* 1: - NA */ |
| 8U, /* 2: CC2S, IC2PSC, IC2F */ |
| 0U, /* 3: - NA */ |
| 0U, /* 4: CC3S, IC3PSC, IC3F */ |
| 0U, /* 5: - NA */ |
| 8U /* 6: CC4S, IC4PSC, IC4F */ |
| }; |
| |
| static const uint8_t SHIFT_TAB_CCxP[] = |
| { |
| 0U, /* 0: CC1P */ |
| 2U, /* 1: CC1NP */ |
| 4U, /* 2: CC2P */ |
| 6U, /* 3: CC2NP */ |
| 8U, /* 4: CC3P */ |
| 10U, /* 5: CC3NP */ |
| 12U /* 6: CC4P */ |
| }; |
| |
| static const uint8_t SHIFT_TAB_OISx[] = |
| { |
| 0U, /* 0: OIS1 */ |
| 1U, /* 1: OIS1N */ |
| 2U, /* 2: OIS2 */ |
| 3U, /* 3: OIS2N */ |
| 4U, /* 4: OIS3 */ |
| 5U, /* 5: OIS3N */ |
| 6U /* 6: OIS4 */ |
| }; |
| /** |
| * @} |
| */ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup TIM_LL_Private_Constants TIM Private Constants |
| * @{ |
| */ |
| |
| |
| /* Remap mask definitions */ |
| #define TIMx_OR_RMP_SHIFT 16U |
| #define TIMx_OR_RMP_MASK 0x0000FFFFU |
| #define TIM2_OR_RMP_MASK (TIM_OR_ITR1_RMP << TIMx_OR_RMP_SHIFT) |
| #define TIM5_OR_RMP_MASK (TIM_OR_TI4_RMP << TIMx_OR_RMP_SHIFT) |
| #define TIM11_OR_RMP_MASK (TIM_OR_TI1_RMP << TIMx_OR_RMP_SHIFT) |
| |
| /* Mask used to set the TDG[x:0] of the DTG bits of the TIMx_BDTR register */ |
| #define DT_DELAY_1 ((uint8_t)0x7F) |
| #define DT_DELAY_2 ((uint8_t)0x3F) |
| #define DT_DELAY_3 ((uint8_t)0x1F) |
| #define DT_DELAY_4 ((uint8_t)0x1F) |
| |
| /* Mask used to set the DTG[7:5] bits of the DTG bits of the TIMx_BDTR register */ |
| #define DT_RANGE_1 ((uint8_t)0x00) |
| #define DT_RANGE_2 ((uint8_t)0x80) |
| #define DT_RANGE_3 ((uint8_t)0xC0) |
| #define DT_RANGE_4 ((uint8_t)0xE0) |
| |
| |
| /** |
| * @} |
| */ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup TIM_LL_Private_Macros TIM Private Macros |
| * @{ |
| */ |
| /** @brief Convert channel id into channel index. |
| * @param __CHANNEL__ This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH1N |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH2N |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH3N |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval none |
| */ |
| #define TIM_GET_CHANNEL_INDEX( __CHANNEL__) \ |
| (((__CHANNEL__) == LL_TIM_CHANNEL_CH1) ? 0U :\ |
| ((__CHANNEL__) == LL_TIM_CHANNEL_CH1N) ? 1U :\ |
| ((__CHANNEL__) == LL_TIM_CHANNEL_CH2) ? 2U :\ |
| ((__CHANNEL__) == LL_TIM_CHANNEL_CH2N) ? 3U :\ |
| ((__CHANNEL__) == LL_TIM_CHANNEL_CH3) ? 4U :\ |
| ((__CHANNEL__) == LL_TIM_CHANNEL_CH3N) ? 5U : 6U) |
| |
| /** @brief Calculate the deadtime sampling period(in ps). |
| * @param __TIMCLK__ timer input clock frequency (in Hz). |
| * @param __CKD__ This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 |
| * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 |
| * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 |
| * @retval none |
| */ |
| #define TIM_CALC_DTS(__TIMCLK__, __CKD__) \ |
| (((__CKD__) == LL_TIM_CLOCKDIVISION_DIV1) ? ((uint64_t)1000000000000U/(__TIMCLK__)) : \ |
| ((__CKD__) == LL_TIM_CLOCKDIVISION_DIV2) ? ((uint64_t)1000000000000U/((__TIMCLK__) >> 1U)) : \ |
| ((uint64_t)1000000000000U/((__TIMCLK__) >> 2U))) |
| /** |
| * @} |
| */ |
| |
| |
| /* Exported types ------------------------------------------------------------*/ |
| #if defined(USE_FULL_LL_DRIVER) |
| /** @defgroup TIM_LL_ES_INIT TIM Exported Init structure |
| * @{ |
| */ |
| |
| /** |
| * @brief TIM Time Base configuration structure definition. |
| */ |
| typedef struct |
| { |
| uint16_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. |
| This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_SetPrescaler().*/ |
| |
| uint32_t CounterMode; /*!< Specifies the counter mode. |
| This parameter can be a value of @ref TIM_LL_EC_COUNTERMODE. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_SetCounterMode().*/ |
| |
| uint32_t Autoreload; /*!< Specifies the auto reload value to be loaded into the active |
| Auto-Reload Register at the next update event. |
| This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF. |
| Some timer instances may support 32 bits counters. In that case this parameter must be a number between 0x0000 and 0xFFFFFFFF. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_SetAutoReload().*/ |
| |
| uint32_t ClockDivision; /*!< Specifies the clock division. |
| This parameter can be a value of @ref TIM_LL_EC_CLOCKDIVISION. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_SetClockDivision().*/ |
| |
| uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter |
| reaches zero, an update event is generated and counting restarts |
| from the RCR value (N). |
| This means in PWM mode that (N+1) corresponds to: |
| - the number of PWM periods in edge-aligned mode |
| - the number of half PWM period in center-aligned mode |
| GP timers: this parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. |
| Advanced timers: this parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_SetRepetitionCounter().*/ |
| } LL_TIM_InitTypeDef; |
| |
| /** |
| * @brief TIM Output Compare configuration structure definition. |
| */ |
| typedef struct |
| { |
| uint32_t OCMode; /*!< Specifies the output mode. |
| This parameter can be a value of @ref TIM_LL_EC_OCMODE. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetMode().*/ |
| |
| uint32_t OCState; /*!< Specifies the TIM Output Compare state. |
| This parameter can be a value of @ref TIM_LL_EC_OCSTATE. |
| |
| This feature can be modified afterwards using unitary functions @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ |
| |
| uint32_t OCNState; /*!< Specifies the TIM complementary Output Compare state. |
| This parameter can be a value of @ref TIM_LL_EC_OCSTATE. |
| |
| This feature can be modified afterwards using unitary functions @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ |
| |
| uint32_t CompareValue; /*!< Specifies the Compare value to be loaded into the Capture Compare Register. |
| This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. |
| |
| This feature can be modified afterwards using unitary function LL_TIM_OC_SetCompareCHx (x=1..6).*/ |
| |
| uint32_t OCPolarity; /*!< Specifies the output polarity. |
| This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetPolarity().*/ |
| |
| uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. |
| This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetPolarity().*/ |
| |
| |
| uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. |
| This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetIdleState().*/ |
| |
| uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. |
| This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetIdleState().*/ |
| } LL_TIM_OC_InitTypeDef; |
| |
| /** |
| * @brief TIM Input Capture configuration structure definition. |
| */ |
| |
| typedef struct |
| { |
| |
| uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. |
| This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/ |
| |
| uint32_t ICActiveInput; /*!< Specifies the input. |
| This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/ |
| |
| uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. |
| This parameter can be a value of @ref TIM_LL_EC_ICPSC. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/ |
| |
| uint32_t ICFilter; /*!< Specifies the input capture filter. |
| This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/ |
| } LL_TIM_IC_InitTypeDef; |
| |
| |
| /** |
| * @brief TIM Encoder interface configuration structure definition. |
| */ |
| typedef struct |
| { |
| uint32_t EncoderMode; /*!< Specifies the encoder resolution (x2 or x4). |
| This parameter can be a value of @ref TIM_LL_EC_ENCODERMODE. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_SetEncoderMode().*/ |
| |
| uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. |
| This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/ |
| |
| uint32_t IC1ActiveInput; /*!< Specifies the TI1 input source |
| This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/ |
| |
| uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. |
| This parameter can be a value of @ref TIM_LL_EC_ICPSC. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/ |
| |
| uint32_t IC1Filter; /*!< Specifies the TI1 input filter. |
| This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/ |
| |
| uint32_t IC2Polarity; /*!< Specifies the active edge of TI2 input. |
| This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/ |
| |
| uint32_t IC2ActiveInput; /*!< Specifies the TI2 input source |
| This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetActiveInput().*/ |
| |
| uint32_t IC2Prescaler; /*!< Specifies the TI2 input prescaler value. |
| This parameter can be a value of @ref TIM_LL_EC_ICPSC. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/ |
| |
| uint32_t IC2Filter; /*!< Specifies the TI2 input filter. |
| This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/ |
| |
| } LL_TIM_ENCODER_InitTypeDef; |
| |
| /** |
| * @brief TIM Hall sensor interface configuration structure definition. |
| */ |
| typedef struct |
| { |
| |
| uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. |
| This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPolarity().*/ |
| |
| uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. |
| Prescaler must be set to get a maximum counter period longer than the |
| time interval between 2 consecutive changes on the Hall inputs. |
| This parameter can be a value of @ref TIM_LL_EC_ICPSC. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetPrescaler().*/ |
| |
| uint32_t IC1Filter; /*!< Specifies the TI1 input filter. |
| This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_IC_SetFilter().*/ |
| |
| uint32_t CommutationDelay; /*!< Specifies the compare value to be loaded into the Capture Compare Register. |
| A positive pulse (TRGO event) is generated with a programmable delay every time |
| a change occurs on the Hall inputs. |
| This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetCompareCH2().*/ |
| } LL_TIM_HALLSENSOR_InitTypeDef; |
| |
| /** |
| * @brief BDTR (Break and Dead Time) structure definition |
| */ |
| typedef struct |
| { |
| uint32_t OSSRState; /*!< Specifies the Off-State selection used in Run mode. |
| This parameter can be a value of @ref TIM_LL_EC_OSSR |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_SetOffStates() |
| |
| @note This bit-field cannot be modified as long as LOCK level 2 has been programmed. */ |
| |
| uint32_t OSSIState; /*!< Specifies the Off-State used in Idle state. |
| This parameter can be a value of @ref TIM_LL_EC_OSSI |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_SetOffStates() |
| |
| @note This bit-field cannot be modified as long as LOCK level 2 has been programmed. */ |
| |
| uint32_t LockLevel; /*!< Specifies the LOCK level parameters. |
| This parameter can be a value of @ref TIM_LL_EC_LOCKLEVEL |
| |
| @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR register |
| has been written, their content is frozen until the next reset.*/ |
| |
| uint8_t DeadTime; /*!< Specifies the delay time between the switching-off and the |
| switching-on of the outputs. |
| This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF. |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_OC_SetDeadTime() |
| |
| @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been programmed. */ |
| |
| uint16_t BreakState; /*!< Specifies whether the TIM Break input is enabled or not. |
| This parameter can be a value of @ref TIM_LL_EC_BREAK_ENABLE |
| |
| This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK() |
| |
| @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ |
| |
| uint32_t BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. |
| This parameter can be a value of @ref TIM_LL_EC_BREAK_POLARITY |
| |
| This feature can be modified afterwards using unitary function @ref LL_TIM_ConfigBRK() |
| |
| @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ |
| |
| uint32_t AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. |
| This parameter can be a value of @ref TIM_LL_EC_AUTOMATICOUTPUT_ENABLE |
| |
| This feature can be modified afterwards using unitary functions @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput() |
| |
| @note This bit-field can not be modified as long as LOCK level 1 has been programmed. */ |
| } LL_TIM_BDTR_InitTypeDef; |
| |
| /** |
| * @} |
| */ |
| #endif /* USE_FULL_LL_DRIVER */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup TIM_LL_Exported_Constants TIM Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup TIM_LL_EC_GET_FLAG Get Flags Defines |
| * @brief Flags defines which can be used with LL_TIM_ReadReg function. |
| * @{ |
| */ |
| #define LL_TIM_SR_UIF TIM_SR_UIF /*!< Update interrupt flag */ |
| #define LL_TIM_SR_CC1IF TIM_SR_CC1IF /*!< Capture/compare 1 interrupt flag */ |
| #define LL_TIM_SR_CC2IF TIM_SR_CC2IF /*!< Capture/compare 2 interrupt flag */ |
| #define LL_TIM_SR_CC3IF TIM_SR_CC3IF /*!< Capture/compare 3 interrupt flag */ |
| #define LL_TIM_SR_CC4IF TIM_SR_CC4IF /*!< Capture/compare 4 interrupt flag */ |
| #define LL_TIM_SR_COMIF TIM_SR_COMIF /*!< COM interrupt flag */ |
| #define LL_TIM_SR_TIF TIM_SR_TIF /*!< Trigger interrupt flag */ |
| #define LL_TIM_SR_BIF TIM_SR_BIF /*!< Break interrupt flag */ |
| #define LL_TIM_SR_CC1OF TIM_SR_CC1OF /*!< Capture/Compare 1 overcapture flag */ |
| #define LL_TIM_SR_CC2OF TIM_SR_CC2OF /*!< Capture/Compare 2 overcapture flag */ |
| #define LL_TIM_SR_CC3OF TIM_SR_CC3OF /*!< Capture/Compare 3 overcapture flag */ |
| #define LL_TIM_SR_CC4OF TIM_SR_CC4OF /*!< Capture/Compare 4 overcapture flag */ |
| /** |
| * @} |
| */ |
| |
| #if defined(USE_FULL_LL_DRIVER) |
| /** @defgroup TIM_LL_EC_BREAK_ENABLE Break Enable |
| * @{ |
| */ |
| #define LL_TIM_BREAK_DISABLE 0x00000000U /*!< Break function disabled */ |
| #define LL_TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break function enabled */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_AUTOMATICOUTPUT_ENABLE Automatic output enable |
| * @{ |
| */ |
| #define LL_TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ |
| #define LL_TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event */ |
| /** |
| * @} |
| */ |
| #endif /* USE_FULL_LL_DRIVER */ |
| |
| /** @defgroup TIM_LL_EC_IT IT Defines |
| * @brief IT defines which can be used with LL_TIM_ReadReg and LL_TIM_WriteReg functions. |
| * @{ |
| */ |
| #define LL_TIM_DIER_UIE TIM_DIER_UIE /*!< Update interrupt enable */ |
| #define LL_TIM_DIER_CC1IE TIM_DIER_CC1IE /*!< Capture/compare 1 interrupt enable */ |
| #define LL_TIM_DIER_CC2IE TIM_DIER_CC2IE /*!< Capture/compare 2 interrupt enable */ |
| #define LL_TIM_DIER_CC3IE TIM_DIER_CC3IE /*!< Capture/compare 3 interrupt enable */ |
| #define LL_TIM_DIER_CC4IE TIM_DIER_CC4IE /*!< Capture/compare 4 interrupt enable */ |
| #define LL_TIM_DIER_COMIE TIM_DIER_COMIE /*!< COM interrupt enable */ |
| #define LL_TIM_DIER_TIE TIM_DIER_TIE /*!< Trigger interrupt enable */ |
| #define LL_TIM_DIER_BIE TIM_DIER_BIE /*!< Break interrupt enable */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_UPDATESOURCE Update Source |
| * @{ |
| */ |
| #define LL_TIM_UPDATESOURCE_REGULAR 0x00000000U /*!< Counter overflow/underflow, Setting the UG bit or Update generation through the slave mode controller generates an update request */ |
| #define LL_TIM_UPDATESOURCE_COUNTER TIM_CR1_URS /*!< Only counter overflow/underflow generates an update request */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode |
| * @{ |
| */ |
| #define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter is not stopped at update event */ |
| #define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter stops counting at the next update event */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_COUNTERMODE Counter Mode |
| * @{ |
| */ |
| #define LL_TIM_COUNTERMODE_UP 0x00000000U /*!<Counter used as upcounter */ |
| #define LL_TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as downcounter */ |
| #define LL_TIM_COUNTERMODE_CENTER_DOWN TIM_CR1_CMS_0 /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting down. */ |
| #define LL_TIM_COUNTERMODE_CENTER_UP TIM_CR1_CMS_1 /*!<The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up */ |
| #define LL_TIM_COUNTERMODE_CENTER_UP_DOWN TIM_CR1_CMS /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up or down. */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_CLOCKDIVISION Clock Division |
| * @{ |
| */ |
| #define LL_TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< tDTS=tCK_INT */ |
| #define LL_TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< tDTS=2*tCK_INT */ |
| #define LL_TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< tDTS=4*tCK_INT */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_COUNTERDIRECTION Counter Direction |
| * @{ |
| */ |
| #define LL_TIM_COUNTERDIRECTION_UP 0x00000000U /*!< Timer counter counts up */ |
| #define LL_TIM_COUNTERDIRECTION_DOWN TIM_CR1_DIR /*!< Timer counter counts down */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_CCUPDATESOURCE Capture Compare Update Source |
| * @{ |
| */ |
| #define LL_TIM_CCUPDATESOURCE_COMG_ONLY 0x00000000U /*!< Capture/compare control bits are updated by setting the COMG bit only */ |
| #define LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI TIM_CR2_CCUS /*!< Capture/compare control bits are updated by setting the COMG bit or when a rising edge occurs on trigger input (TRGI) */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_CCDMAREQUEST Capture Compare DMA Request |
| * @{ |
| */ |
| #define LL_TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when CCx event occurs */ |
| #define LL_TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_LOCKLEVEL Lock Level |
| * @{ |
| */ |
| #define LL_TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF - No bit is write protected */ |
| #define LL_TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ |
| #define LL_TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ |
| #define LL_TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_CHANNEL Channel |
| * @{ |
| */ |
| #define LL_TIM_CHANNEL_CH1 TIM_CCER_CC1E /*!< Timer input/output channel 1 */ |
| #define LL_TIM_CHANNEL_CH1N TIM_CCER_CC1NE /*!< Timer complementary output channel 1 */ |
| #define LL_TIM_CHANNEL_CH2 TIM_CCER_CC2E /*!< Timer input/output channel 2 */ |
| #define LL_TIM_CHANNEL_CH2N TIM_CCER_CC2NE /*!< Timer complementary output channel 2 */ |
| #define LL_TIM_CHANNEL_CH3 TIM_CCER_CC3E /*!< Timer input/output channel 3 */ |
| #define LL_TIM_CHANNEL_CH3N TIM_CCER_CC3NE /*!< Timer complementary output channel 3 */ |
| #define LL_TIM_CHANNEL_CH4 TIM_CCER_CC4E /*!< Timer input/output channel 4 */ |
| /** |
| * @} |
| */ |
| |
| #if defined(USE_FULL_LL_DRIVER) |
| /** @defgroup TIM_LL_EC_OCSTATE Output Configuration State |
| * @{ |
| */ |
| #define LL_TIM_OCSTATE_DISABLE 0x00000000U /*!< OCx is not active */ |
| #define LL_TIM_OCSTATE_ENABLE TIM_CCER_CC1E /*!< OCx signal is output on the corresponding output pin */ |
| /** |
| * @} |
| */ |
| #endif /* USE_FULL_LL_DRIVER */ |
| |
| /** @defgroup TIM_LL_EC_OCMODE Output Configuration Mode |
| * @{ |
| */ |
| #define LL_TIM_OCMODE_FROZEN 0x00000000U /*!<The comparison between the output compare register TIMx_CCRy and the counter TIMx_CNT has no effect on the output channel level */ |
| #define LL_TIM_OCMODE_ACTIVE TIM_CCMR1_OC1M_0 /*!<OCyREF is forced high on compare match*/ |
| #define LL_TIM_OCMODE_INACTIVE TIM_CCMR1_OC1M_1 /*!<OCyREF is forced low on compare match*/ |
| #define LL_TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!<OCyREF toggles on compare match*/ |
| #define LL_TIM_OCMODE_FORCED_INACTIVE TIM_CCMR1_OC1M_2 /*!<OCyREF is forced low*/ |
| #define LL_TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0) /*!<OCyREF is forced high*/ |
| #define LL_TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1) /*!<In upcounting, channel y is active as long as TIMx_CNT<TIMx_CCRy else inactive. In downcounting, channel y is inactive as long as TIMx_CNT>TIMx_CCRy else active.*/ |
| #define LL_TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!<In upcounting, channel y is inactive as long as TIMx_CNT<TIMx_CCRy else active. In downcounting, channel y is active as long as TIMx_CNT>TIMx_CCRy else inactive*/ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_OCPOLARITY Output Configuration Polarity |
| * @{ |
| */ |
| #define LL_TIM_OCPOLARITY_HIGH 0x00000000U /*!< OCxactive high*/ |
| #define LL_TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< OCxactive low*/ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_OCIDLESTATE Output Configuration Idle State |
| * @{ |
| */ |
| #define LL_TIM_OCIDLESTATE_LOW 0x00000000U /*!<OCx=0 (after a dead-time if OC is implemented) when MOE=0*/ |
| #define LL_TIM_OCIDLESTATE_HIGH TIM_CR2_OIS1 /*!<OCx=1 (after a dead-time if OC is implemented) when MOE=0*/ |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup TIM_LL_EC_ACTIVEINPUT Active Input Selection |
| * @{ |
| */ |
| #define LL_TIM_ACTIVEINPUT_DIRECTTI (TIM_CCMR1_CC1S_0 << 16U) /*!< ICx is mapped on TIx */ |
| #define LL_TIM_ACTIVEINPUT_INDIRECTTI (TIM_CCMR1_CC1S_1 << 16U) /*!< ICx is mapped on TIy */ |
| #define LL_TIM_ACTIVEINPUT_TRC (TIM_CCMR1_CC1S << 16U) /*!< ICx is mapped on TRC */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_ICPSC Input Configuration Prescaler |
| * @{ |
| */ |
| #define LL_TIM_ICPSC_DIV1 0x00000000U /*!< No prescaler, capture is done each time an edge is detected on the capture input */ |
| #define LL_TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0 << 16U) /*!< Capture is done once every 2 events */ |
| #define LL_TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1 << 16U) /*!< Capture is done once every 4 events */ |
| #define LL_TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC << 16U) /*!< Capture is done once every 8 events */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_IC_FILTER Input Configuration Filter |
| * @{ |
| */ |
| #define LL_TIM_IC_FILTER_FDIV1 0x00000000U /*!< No filter, sampling is done at fDTS */ |
| #define LL_TIM_IC_FILTER_FDIV1_N2 (TIM_CCMR1_IC1F_0 << 16U) /*!< fSAMPLING=fCK_INT, N=2 */ |
| #define LL_TIM_IC_FILTER_FDIV1_N4 (TIM_CCMR1_IC1F_1 << 16U) /*!< fSAMPLING=fCK_INT, N=4 */ |
| #define LL_TIM_IC_FILTER_FDIV1_N8 ((TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fCK_INT, N=8 */ |
| #define LL_TIM_IC_FILTER_FDIV2_N6 (TIM_CCMR1_IC1F_2 << 16U) /*!< fSAMPLING=fDTS/2, N=6 */ |
| #define LL_TIM_IC_FILTER_FDIV2_N8 ((TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/2, N=8 */ |
| #define LL_TIM_IC_FILTER_FDIV4_N6 ((TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_1) << 16U) /*!< fSAMPLING=fDTS/4, N=6 */ |
| #define LL_TIM_IC_FILTER_FDIV4_N8 ((TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/4, N=8 */ |
| #define LL_TIM_IC_FILTER_FDIV8_N6 (TIM_CCMR1_IC1F_3 << 16U) /*!< fSAMPLING=fDTS/8, N=6 */ |
| #define LL_TIM_IC_FILTER_FDIV8_N8 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/8, N=8 */ |
| #define LL_TIM_IC_FILTER_FDIV16_N5 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_1) << 16U) /*!< fSAMPLING=fDTS/16, N=5 */ |
| #define LL_TIM_IC_FILTER_FDIV16_N6 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_1 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/16, N=6 */ |
| #define LL_TIM_IC_FILTER_FDIV16_N8 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_2) << 16U) /*!< fSAMPLING=fDTS/16, N=8 */ |
| #define LL_TIM_IC_FILTER_FDIV32_N5 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_0) << 16U) /*!< fSAMPLING=fDTS/32, N=5 */ |
| #define LL_TIM_IC_FILTER_FDIV32_N6 ((TIM_CCMR1_IC1F_3 | TIM_CCMR1_IC1F_2 | TIM_CCMR1_IC1F_1) << 16U) /*!< fSAMPLING=fDTS/32, N=6 */ |
| #define LL_TIM_IC_FILTER_FDIV32_N8 (TIM_CCMR1_IC1F << 16U) /*!< fSAMPLING=fDTS/32, N=8 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_IC_POLARITY Input Configuration Polarity |
| * @{ |
| */ |
| #define LL_TIM_IC_POLARITY_RISING 0x00000000U /*!< The circuit is sensitive to TIxFP1 rising edge, TIxFP1 is not inverted */ |
| #define LL_TIM_IC_POLARITY_FALLING TIM_CCER_CC1P /*!< The circuit is sensitive to TIxFP1 falling edge, TIxFP1 is inverted */ |
| #define LL_TIM_IC_POLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< The circuit is sensitive to both TIxFP1 rising and falling edges, TIxFP1 is not inverted */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_CLOCKSOURCE Clock Source |
| * @{ |
| */ |
| #define LL_TIM_CLOCKSOURCE_INTERNAL 0x00000000U /*!< The timer is clocked by the internal clock provided from the RCC */ |
| #define LL_TIM_CLOCKSOURCE_EXT_MODE1 (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Counter counts at each rising or falling edge on a selected input*/ |
| #define LL_TIM_CLOCKSOURCE_EXT_MODE2 TIM_SMCR_ECE /*!< Counter counts at each rising or falling edge on the external trigger input ETR */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_ENCODERMODE Encoder Mode |
| * @{ |
| */ |
| #define LL_TIM_ENCODERMODE_X2_TI1 TIM_SMCR_SMS_0 /*!< Quadrature encoder mode 1, x2 mode - Counter counts up/down on TI1FP1 edge depending on TI2FP2 level */ |
| #define LL_TIM_ENCODERMODE_X2_TI2 TIM_SMCR_SMS_1 /*!< Quadrature encoder mode 2, x2 mode - Counter counts up/down on TI2FP2 edge depending on TI1FP1 level */ |
| #define LL_TIM_ENCODERMODE_X4_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) /*!< Quadrature encoder mode 3, x4 mode - Counter counts up/down on both TI1FP1 and TI2FP2 edges depending on the level of the other input */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_TRGO Trigger Output |
| * @{ |
| */ |
| #define LL_TIM_TRGO_RESET 0x00000000U /*!< UG bit from the TIMx_EGR register is used as trigger output */ |
| #define LL_TIM_TRGO_ENABLE TIM_CR2_MMS_0 /*!< Counter Enable signal (CNT_EN) is used as trigger output */ |
| #define LL_TIM_TRGO_UPDATE TIM_CR2_MMS_1 /*!< Update event is used as trigger output */ |
| #define LL_TIM_TRGO_CC1IF (TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< CC1 capture or a compare match is used as trigger output */ |
| #define LL_TIM_TRGO_OC1REF TIM_CR2_MMS_2 /*!< OC1REF signal is used as trigger output */ |
| #define LL_TIM_TRGO_OC2REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_0) /*!< OC2REF signal is used as trigger output */ |
| #define LL_TIM_TRGO_OC3REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1) /*!< OC3REF signal is used as trigger output */ |
| #define LL_TIM_TRGO_OC4REF (TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0) /*!< OC4REF signal is used as trigger output */ |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup TIM_LL_EC_SLAVEMODE Slave Mode |
| * @{ |
| */ |
| #define LL_TIM_SLAVEMODE_DISABLED 0x00000000U /*!< Slave mode disabled */ |
| #define LL_TIM_SLAVEMODE_RESET TIM_SMCR_SMS_2 /*!< Reset Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter */ |
| #define LL_TIM_SLAVEMODE_GATED (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0) /*!< Gated Mode - The counter clock is enabled when the trigger input (TRGI) is high */ |
| #define LL_TIM_SLAVEMODE_TRIGGER (TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1) /*!< Trigger Mode - The counter starts at a rising edge of the trigger TRGI */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_TS Trigger Selection |
| * @{ |
| */ |
| #define LL_TIM_TS_ITR0 0x00000000U /*!< Internal Trigger 0 (ITR0) is used as trigger input */ |
| #define LL_TIM_TS_ITR1 TIM_SMCR_TS_0 /*!< Internal Trigger 1 (ITR1) is used as trigger input */ |
| #define LL_TIM_TS_ITR2 TIM_SMCR_TS_1 /*!< Internal Trigger 2 (ITR2) is used as trigger input */ |
| #define LL_TIM_TS_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) /*!< Internal Trigger 3 (ITR3) is used as trigger input */ |
| #define LL_TIM_TS_TI1F_ED TIM_SMCR_TS_2 /*!< TI1 Edge Detector (TI1F_ED) is used as trigger input */ |
| #define LL_TIM_TS_TI1FP1 (TIM_SMCR_TS_2 | TIM_SMCR_TS_0) /*!< Filtered Timer Input 1 (TI1FP1) is used as trigger input */ |
| #define LL_TIM_TS_TI2FP2 (TIM_SMCR_TS_2 | TIM_SMCR_TS_1) /*!< Filtered Timer Input 2 (TI12P2) is used as trigger input */ |
| #define LL_TIM_TS_ETRF (TIM_SMCR_TS_2 | TIM_SMCR_TS_1 | TIM_SMCR_TS_0) /*!< Filtered external Trigger (ETRF) is used as trigger input */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_ETR_POLARITY External Trigger Polarity |
| * @{ |
| */ |
| #define LL_TIM_ETR_POLARITY_NONINVERTED 0x00000000U /*!< ETR is non-inverted, active at high level or rising edge */ |
| #define LL_TIM_ETR_POLARITY_INVERTED TIM_SMCR_ETP /*!< ETR is inverted, active at low level or falling edge */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_ETR_PRESCALER External Trigger Prescaler |
| * @{ |
| */ |
| #define LL_TIM_ETR_PRESCALER_DIV1 0x00000000U /*!< ETR prescaler OFF */ |
| #define LL_TIM_ETR_PRESCALER_DIV2 TIM_SMCR_ETPS_0 /*!< ETR frequency is divided by 2 */ |
| #define LL_TIM_ETR_PRESCALER_DIV4 TIM_SMCR_ETPS_1 /*!< ETR frequency is divided by 4 */ |
| #define LL_TIM_ETR_PRESCALER_DIV8 TIM_SMCR_ETPS /*!< ETR frequency is divided by 8 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_ETR_FILTER External Trigger Filter |
| * @{ |
| */ |
| #define LL_TIM_ETR_FILTER_FDIV1 0x00000000U /*!< No filter, sampling is done at fDTS */ |
| #define LL_TIM_ETR_FILTER_FDIV1_N2 TIM_SMCR_ETF_0 /*!< fSAMPLING=fCK_INT, N=2 */ |
| #define LL_TIM_ETR_FILTER_FDIV1_N4 TIM_SMCR_ETF_1 /*!< fSAMPLING=fCK_INT, N=4 */ |
| #define LL_TIM_ETR_FILTER_FDIV1_N8 (TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fCK_INT, N=8 */ |
| #define LL_TIM_ETR_FILTER_FDIV2_N6 TIM_SMCR_ETF_2 /*!< fSAMPLING=fDTS/2, N=6 */ |
| #define LL_TIM_ETR_FILTER_FDIV2_N8 (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/2, N=8 */ |
| #define LL_TIM_ETR_FILTER_FDIV4_N6 (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1) /*!< fSAMPLING=fDTS/4, N=6 */ |
| #define LL_TIM_ETR_FILTER_FDIV4_N8 (TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/4, N=8 */ |
| #define LL_TIM_ETR_FILTER_FDIV8_N6 TIM_SMCR_ETF_3 /*!< fSAMPLING=fDTS/8, N=8 */ |
| #define LL_TIM_ETR_FILTER_FDIV8_N8 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/16, N=5 */ |
| #define LL_TIM_ETR_FILTER_FDIV16_N5 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_1) /*!< fSAMPLING=fDTS/16, N=6 */ |
| #define LL_TIM_ETR_FILTER_FDIV16_N6 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_1 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/16, N=8 */ |
| #define LL_TIM_ETR_FILTER_FDIV16_N8 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2) /*!< fSAMPLING=fDTS/16, N=5 */ |
| #define LL_TIM_ETR_FILTER_FDIV32_N5 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2 | TIM_SMCR_ETF_0) /*!< fSAMPLING=fDTS/32, N=5 */ |
| #define LL_TIM_ETR_FILTER_FDIV32_N6 (TIM_SMCR_ETF_3 | TIM_SMCR_ETF_2 | TIM_SMCR_ETF_1) /*!< fSAMPLING=fDTS/32, N=6 */ |
| #define LL_TIM_ETR_FILTER_FDIV32_N8 TIM_SMCR_ETF /*!< fSAMPLING=fDTS/32, N=8 */ |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup TIM_LL_EC_BREAK_POLARITY break polarity |
| * @{ |
| */ |
| #define LL_TIM_BREAK_POLARITY_LOW 0x00000000U /*!< Break input BRK is active low */ |
| #define LL_TIM_BREAK_POLARITY_HIGH TIM_BDTR_BKP /*!< Break input BRK is active high */ |
| /** |
| * @} |
| */ |
| |
| |
| |
| |
| /** @defgroup TIM_LL_EC_OSSI OSSI |
| * @{ |
| */ |
| #define LL_TIM_OSSI_DISABLE 0x00000000U /*!< When inactive, OCx/OCxN outputs are disabled */ |
| #define LL_TIM_OSSI_ENABLE TIM_BDTR_OSSI /*!< When inactive, OxC/OCxN outputs are first forced with their inactive level then forced to their idle level after the deadtime */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_OSSR OSSR |
| * @{ |
| */ |
| #define LL_TIM_OSSR_DISABLE 0x00000000U /*!< When inactive, OCx/OCxN outputs are disabled */ |
| #define LL_TIM_OSSR_ENABLE TIM_BDTR_OSSR /*!< When inactive, OC/OCN outputs are enabled with their inactive level as soon as CCxE=1 or CCxNE=1 */ |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup TIM_LL_EC_DMABURST_BASEADDR DMA Burst Base Address |
| * @{ |
| */ |
| #define LL_TIM_DMABURST_BASEADDR_CR1 0x00000000U /*!< TIMx_CR1 register is the DMA base address for DMA burst */ |
| #define LL_TIM_DMABURST_BASEADDR_CR2 TIM_DCR_DBA_0 /*!< TIMx_CR2 register is the DMA base address for DMA burst */ |
| #define LL_TIM_DMABURST_BASEADDR_SMCR TIM_DCR_DBA_1 /*!< TIMx_SMCR register is the DMA base address for DMA burst */ |
| #define LL_TIM_DMABURST_BASEADDR_DIER (TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_DIER register is the DMA base address for DMA burst */ |
| #define LL_TIM_DMABURST_BASEADDR_SR TIM_DCR_DBA_2 /*!< TIMx_SR register is the DMA base address for DMA burst */ |
| #define LL_TIM_DMABURST_BASEADDR_EGR (TIM_DCR_DBA_2 | TIM_DCR_DBA_0) /*!< TIMx_EGR register is the DMA base address for DMA burst */ |
| #define LL_TIM_DMABURST_BASEADDR_CCMR1 (TIM_DCR_DBA_2 | TIM_DCR_DBA_1) /*!< TIMx_CCMR1 register is the DMA base address for DMA burst */ |
| #define LL_TIM_DMABURST_BASEADDR_CCMR2 (TIM_DCR_DBA_2 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_CCMR2 register is the DMA base address for DMA burst */ |
| #define LL_TIM_DMABURST_BASEADDR_CCER TIM_DCR_DBA_3 /*!< TIMx_CCER register is the DMA base address for DMA burst */ |
| #define LL_TIM_DMABURST_BASEADDR_CNT (TIM_DCR_DBA_3 | TIM_DCR_DBA_0) /*!< TIMx_CNT register is the DMA base address for DMA burst */ |
| #define LL_TIM_DMABURST_BASEADDR_PSC (TIM_DCR_DBA_3 | TIM_DCR_DBA_1) /*!< TIMx_PSC register is the DMA base address for DMA burst */ |
| #define LL_TIM_DMABURST_BASEADDR_ARR (TIM_DCR_DBA_3 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_ARR register is the DMA base address for DMA burst */ |
| #define LL_TIM_DMABURST_BASEADDR_RCR (TIM_DCR_DBA_3 | TIM_DCR_DBA_2) /*!< TIMx_RCR register is the DMA base address for DMA burst */ |
| #define LL_TIM_DMABURST_BASEADDR_CCR1 (TIM_DCR_DBA_3 | TIM_DCR_DBA_2 | TIM_DCR_DBA_0) /*!< TIMx_CCR1 register is the DMA base address for DMA burst */ |
| #define LL_TIM_DMABURST_BASEADDR_CCR2 (TIM_DCR_DBA_3 | TIM_DCR_DBA_2 | TIM_DCR_DBA_1) /*!< TIMx_CCR2 register is the DMA base address for DMA burst */ |
| #define LL_TIM_DMABURST_BASEADDR_CCR3 (TIM_DCR_DBA_3 | TIM_DCR_DBA_2 | TIM_DCR_DBA_1 | TIM_DCR_DBA_0) /*!< TIMx_CCR3 register is the DMA base address for DMA burst */ |
| #define LL_TIM_DMABURST_BASEADDR_CCR4 TIM_DCR_DBA_4 /*!< TIMx_CCR4 register is the DMA base address for DMA burst */ |
| #define LL_TIM_DMABURST_BASEADDR_BDTR (TIM_DCR_DBA_4 | TIM_DCR_DBA_0) /*!< TIMx_BDTR register is the DMA base address for DMA burst */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_DMABURST_LENGTH DMA Burst Length |
| * @{ |
| */ |
| #define LL_TIM_DMABURST_LENGTH_1TRANSFER 0x00000000U /*!< Transfer is done to 1 register starting from the DMA burst base address */ |
| #define LL_TIM_DMABURST_LENGTH_2TRANSFERS TIM_DCR_DBL_0 /*!< Transfer is done to 2 registers starting from the DMA burst base address */ |
| #define LL_TIM_DMABURST_LENGTH_3TRANSFERS TIM_DCR_DBL_1 /*!< Transfer is done to 3 registers starting from the DMA burst base address */ |
| #define LL_TIM_DMABURST_LENGTH_4TRANSFERS (TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 4 registers starting from the DMA burst base address */ |
| #define LL_TIM_DMABURST_LENGTH_5TRANSFERS TIM_DCR_DBL_2 /*!< Transfer is done to 5 registers starting from the DMA burst base address */ |
| #define LL_TIM_DMABURST_LENGTH_6TRANSFERS (TIM_DCR_DBL_2 | TIM_DCR_DBL_0) /*!< Transfer is done to 6 registers starting from the DMA burst base address */ |
| #define LL_TIM_DMABURST_LENGTH_7TRANSFERS (TIM_DCR_DBL_2 | TIM_DCR_DBL_1) /*!< Transfer is done to 7 registers starting from the DMA burst base address */ |
| #define LL_TIM_DMABURST_LENGTH_8TRANSFERS (TIM_DCR_DBL_2 | TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 1 registers starting from the DMA burst base address */ |
| #define LL_TIM_DMABURST_LENGTH_9TRANSFERS TIM_DCR_DBL_3 /*!< Transfer is done to 9 registers starting from the DMA burst base address */ |
| #define LL_TIM_DMABURST_LENGTH_10TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_0) /*!< Transfer is done to 10 registers starting from the DMA burst base address */ |
| #define LL_TIM_DMABURST_LENGTH_11TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_1) /*!< Transfer is done to 11 registers starting from the DMA burst base address */ |
| #define LL_TIM_DMABURST_LENGTH_12TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 12 registers starting from the DMA burst base address */ |
| #define LL_TIM_DMABURST_LENGTH_13TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2) /*!< Transfer is done to 13 registers starting from the DMA burst base address */ |
| #define LL_TIM_DMABURST_LENGTH_14TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2 | TIM_DCR_DBL_0) /*!< Transfer is done to 14 registers starting from the DMA burst base address */ |
| #define LL_TIM_DMABURST_LENGTH_15TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2 | TIM_DCR_DBL_1) /*!< Transfer is done to 15 registers starting from the DMA burst base address */ |
| #define LL_TIM_DMABURST_LENGTH_16TRANSFERS (TIM_DCR_DBL_3 | TIM_DCR_DBL_2 | TIM_DCR_DBL_1 | TIM_DCR_DBL_0) /*!< Transfer is done to 16 registers starting from the DMA burst base address */ |
| #define LL_TIM_DMABURST_LENGTH_17TRANSFERS TIM_DCR_DBL_4 /*!< Transfer is done to 17 registers starting from the DMA burst base address */ |
| #define LL_TIM_DMABURST_LENGTH_18TRANSFERS (TIM_DCR_DBL_4 | TIM_DCR_DBL_0) /*!< Transfer is done to 18 registers starting from the DMA burst base address */ |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup TIM_LL_EC_TIM2_ITR1_RMP_TIM8 TIM2 Internal Trigger1 Remap TIM8 |
| * @{ |
| */ |
| #define LL_TIM_TIM2_ITR1_RMP_TIM8_TRGO TIM2_OR_RMP_MASK /*!< TIM2_ITR1 is connected to TIM8_TRGO */ |
| #define LL_TIM_TIM2_ITR1_RMP_ETH_PTP (TIM_OR_ITR1_RMP_0 | TIM2_OR_RMP_MASK) /*!< TIM2_ITR1 is connected to ETH_PTP */ |
| #define LL_TIM_TIM2_ITR1_RMP_OTG_FS_SOF (TIM_OR_ITR1_RMP_1 | TIM2_OR_RMP_MASK) /*!< TIM2_ITR1 is connected to OTG_FS SOF */ |
| #define LL_TIM_TIM2_ITR1_RMP_OTG_HS_SOF (TIM_OR_ITR1_RMP | TIM2_OR_RMP_MASK) /*!< TIM2_ITR1 is connected to OTG_HS SOF */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_TIM5_TI4_RMP TIM5 External Input Ch4 Remap |
| * @{ |
| */ |
| #define LL_TIM_TIM5_TI4_RMP_GPIO TIM5_OR_RMP_MASK /*!< TIM5 channel 4 is connected to GPIO */ |
| #define LL_TIM_TIM5_TI4_RMP_LSI (TIM_OR_TI4_RMP_0 | TIM5_OR_RMP_MASK) /*!< TIM5 channel 4 is connected to LSI internal clock */ |
| #define LL_TIM_TIM5_TI4_RMP_LSE (TIM_OR_TI4_RMP_1 | TIM5_OR_RMP_MASK) /*!< TIM5 channel 4 is connected to LSE */ |
| #define LL_TIM_TIM5_TI4_RMP_RTC (TIM_OR_TI4_RMP | TIM5_OR_RMP_MASK) /*!< TIM5 channel 4 is connected to RTC wakeup interrupt */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EC_TIM11_TI1_RMP TIM11 External Input Capture 1 Remap |
| * @{ |
| */ |
| #define LL_TIM_TIM11_TI1_RMP_GPIO TIM11_OR_RMP_MASK /*!< TIM11 channel 1 is connected to GPIO */ |
| #define LL_TIM_TIM11_TI1_RMP_GPIO1 (TIM_OR_TI1_RMP_0 | TIM11_OR_RMP_MASK) /*!< TIM11 channel 1 is connected to GPIO */ |
| #define LL_TIM_TIM11_TI1_RMP_GPIO2 (TIM_OR_TI1_RMP | TIM11_OR_RMP_MASK) /*!< TIM11 channel 1 is connected to GPIO */ |
| #define LL_TIM_TIM11_TI1_RMP_HSE_RTC (TIM_OR_TI1_RMP_1 | TIM11_OR_RMP_MASK) /*!< TIM11 channel 1 is connected to HSE_RTC */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| /** @defgroup TIM_LL_Exported_Macros TIM Exported Macros |
| * @{ |
| */ |
| |
| /** @defgroup TIM_LL_EM_WRITE_READ Common Write and read registers Macros |
| * @{ |
| */ |
| /** |
| * @brief Write a value in TIM register. |
| * @param __INSTANCE__ TIM Instance |
| * @param __REG__ Register to be written |
| * @param __VALUE__ Value to be written in the register |
| * @retval None |
| */ |
| #define LL_TIM_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG((__INSTANCE__)->__REG__, (__VALUE__)) |
| |
| /** |
| * @brief Read a value in TIM register. |
| * @param __INSTANCE__ TIM Instance |
| * @param __REG__ Register to be read |
| * @retval Register value |
| */ |
| #define LL_TIM_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EM_Exported_Macros Exported_Macros |
| * @{ |
| */ |
| |
| /** |
| * @brief HELPER macro calculating DTG[0:7] in the TIMx_BDTR register to achieve the requested dead time duration. |
| * @note ex: @ref __LL_TIM_CALC_DEADTIME (80000000, @ref LL_TIM_GetClockDivision (), 120); |
| * @param __TIMCLK__ timer input clock frequency (in Hz) |
| * @param __CKD__ This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 |
| * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 |
| * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 |
| * @param __DT__ deadtime duration (in ns) |
| * @retval DTG[0:7] |
| */ |
| #define __LL_TIM_CALC_DEADTIME(__TIMCLK__, __CKD__, __DT__) \ |
| ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__))) & DT_DELAY_1) : \ |
| (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\ |
| (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\ |
| (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\ |
| 0U) |
| |
| /** |
| * @brief HELPER macro calculating the prescaler value to achieve the required counter clock frequency. |
| * @note ex: @ref __LL_TIM_CALC_PSC (80000000, 1000000); |
| * @param __TIMCLK__ timer input clock frequency (in Hz) |
| * @param __CNTCLK__ counter clock frequency (in Hz) |
| * @retval Prescaler value (between Min_Data=0 and Max_Data=65535) |
| */ |
| #define __LL_TIM_CALC_PSC(__TIMCLK__, __CNTCLK__) \ |
| (((__TIMCLK__) >= (__CNTCLK__)) ? (uint32_t)(((__TIMCLK__)/(__CNTCLK__)) - 1U) : 0U) |
| |
| /** |
| * @brief HELPER macro calculating the auto-reload value to achieve the required output signal frequency. |
| * @note ex: @ref __LL_TIM_CALC_ARR (1000000, @ref LL_TIM_GetPrescaler (), 10000); |
| * @param __TIMCLK__ timer input clock frequency (in Hz) |
| * @param __PSC__ prescaler |
| * @param __FREQ__ output signal frequency (in Hz) |
| * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) |
| */ |
| #define __LL_TIM_CALC_ARR(__TIMCLK__, __PSC__, __FREQ__) \ |
| ((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? (((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U))) - 1U) : 0U) |
| |
| /** |
| * @brief HELPER macro calculating the compare value required to achieve the required timer output compare active/inactive delay. |
| * @note ex: @ref __LL_TIM_CALC_DELAY (1000000, @ref LL_TIM_GetPrescaler (), 10); |
| * @param __TIMCLK__ timer input clock frequency (in Hz) |
| * @param __PSC__ prescaler |
| * @param __DELAY__ timer output compare active/inactive delay (in us) |
| * @retval Compare value (between Min_Data=0 and Max_Data=65535) |
| */ |
| #define __LL_TIM_CALC_DELAY(__TIMCLK__, __PSC__, __DELAY__) \ |
| ((uint32_t)(((uint64_t)(__TIMCLK__) * (uint64_t)(__DELAY__)) \ |
| / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U)))) |
| |
| /** |
| * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration (when the timer operates in one pulse mode). |
| * @note ex: @ref __LL_TIM_CALC_PULSE (1000000, @ref LL_TIM_GetPrescaler (), 10, 20); |
| * @param __TIMCLK__ timer input clock frequency (in Hz) |
| * @param __PSC__ prescaler |
| * @param __DELAY__ timer output compare active/inactive delay (in us) |
| * @param __PULSE__ pulse duration (in us) |
| * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) |
| */ |
| #define __LL_TIM_CALC_PULSE(__TIMCLK__, __PSC__, __DELAY__, __PULSE__) \ |
| ((uint32_t)(__LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__PULSE__)) \ |
| + __LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__DELAY__)))) |
| |
| /** |
| * @brief HELPER macro retrieving the ratio of the input capture prescaler |
| * @note ex: @ref __LL_TIM_GET_ICPSC_RATIO (@ref LL_TIM_IC_GetPrescaler ()); |
| * @param __ICPSC__ This parameter can be one of the following values: |
| * @arg @ref LL_TIM_ICPSC_DIV1 |
| * @arg @ref LL_TIM_ICPSC_DIV2 |
| * @arg @ref LL_TIM_ICPSC_DIV4 |
| * @arg @ref LL_TIM_ICPSC_DIV8 |
| * @retval Input capture prescaler ratio (1, 2, 4 or 8) |
| */ |
| #define __LL_TIM_GET_ICPSC_RATIO(__ICPSC__) \ |
| ((uint32_t)(0x01U << (((__ICPSC__) >> 16U) >> TIM_CCMR1_IC1PSC_Pos))) |
| |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @defgroup TIM_LL_Exported_Functions TIM Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup TIM_LL_EF_Time_Base Time Base configuration |
| * @{ |
| */ |
| /** |
| * @brief Enable timer counter. |
| * @rmtoll CR1 CEN LL_TIM_EnableCounter |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_EnableCounter(TIM_TypeDef *TIMx) |
| { |
| SET_BIT(TIMx->CR1, TIM_CR1_CEN); |
| } |
| |
| /** |
| * @brief Disable timer counter. |
| * @rmtoll CR1 CEN LL_TIM_DisableCounter |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_DisableCounter(TIM_TypeDef *TIMx) |
| { |
| CLEAR_BIT(TIMx->CR1, TIM_CR1_CEN); |
| } |
| |
| /** |
| * @brief Indicates whether the timer counter is enabled. |
| * @rmtoll CR1 CEN LL_TIM_IsEnabledCounter |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsEnabledCounter(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->CR1, TIM_CR1_CEN) == (TIM_CR1_CEN)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Enable update event generation. |
| * @rmtoll CR1 UDIS LL_TIM_EnableUpdateEvent |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_EnableUpdateEvent(TIM_TypeDef *TIMx) |
| { |
| CLEAR_BIT(TIMx->CR1, TIM_CR1_UDIS); |
| } |
| |
| /** |
| * @brief Disable update event generation. |
| * @rmtoll CR1 UDIS LL_TIM_DisableUpdateEvent |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_DisableUpdateEvent(TIM_TypeDef *TIMx) |
| { |
| SET_BIT(TIMx->CR1, TIM_CR1_UDIS); |
| } |
| |
| /** |
| * @brief Indicates whether update event generation is enabled. |
| * @rmtoll CR1 UDIS LL_TIM_IsEnabledUpdateEvent |
| * @param TIMx Timer instance |
| * @retval Inverted state of bit (0 or 1). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsEnabledUpdateEvent(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->CR1, TIM_CR1_UDIS) == (uint32_t)RESET) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Set update event source |
| * @note Update event source set to LL_TIM_UPDATESOURCE_REGULAR: any of the following events |
| * generate an update interrupt or DMA request if enabled: |
| * - Counter overflow/underflow |
| * - Setting the UG bit |
| * - Update generation through the slave mode controller |
| * @note Update event source set to LL_TIM_UPDATESOURCE_COUNTER: only counter |
| * overflow/underflow generates an update interrupt or DMA request if enabled. |
| * @rmtoll CR1 URS LL_TIM_SetUpdateSource |
| * @param TIMx Timer instance |
| * @param UpdateSource This parameter can be one of the following values: |
| * @arg @ref LL_TIM_UPDATESOURCE_REGULAR |
| * @arg @ref LL_TIM_UPDATESOURCE_COUNTER |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_SetUpdateSource(TIM_TypeDef *TIMx, uint32_t UpdateSource) |
| { |
| MODIFY_REG(TIMx->CR1, TIM_CR1_URS, UpdateSource); |
| } |
| |
| /** |
| * @brief Get actual event update source |
| * @rmtoll CR1 URS LL_TIM_GetUpdateSource |
| * @param TIMx Timer instance |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_TIM_UPDATESOURCE_REGULAR |
| * @arg @ref LL_TIM_UPDATESOURCE_COUNTER |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_GetUpdateSource(TIM_TypeDef *TIMx) |
| { |
| return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_URS)); |
| } |
| |
| /** |
| * @brief Set one pulse mode (one shot v.s. repetitive). |
| * @rmtoll CR1 OPM LL_TIM_SetOnePulseMode |
| * @param TIMx Timer instance |
| * @param OnePulseMode This parameter can be one of the following values: |
| * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE |
| * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_SetOnePulseMode(TIM_TypeDef *TIMx, uint32_t OnePulseMode) |
| { |
| MODIFY_REG(TIMx->CR1, TIM_CR1_OPM, OnePulseMode); |
| } |
| |
| /** |
| * @brief Get actual one pulse mode. |
| * @rmtoll CR1 OPM LL_TIM_GetOnePulseMode |
| * @param TIMx Timer instance |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE |
| * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_GetOnePulseMode(TIM_TypeDef *TIMx) |
| { |
| return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_OPM)); |
| } |
| |
| /** |
| * @brief Set the timer counter counting mode. |
| * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to |
| * check whether or not the counter mode selection feature is supported |
| * by a timer instance. |
| * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) |
| * requires a timer reset to avoid unexpected direction |
| * due to DIR bit readonly in center aligned mode. |
| * @rmtoll CR1 DIR LL_TIM_SetCounterMode\n |
| * CR1 CMS LL_TIM_SetCounterMode |
| * @param TIMx Timer instance |
| * @param CounterMode This parameter can be one of the following values: |
| * @arg @ref LL_TIM_COUNTERMODE_UP |
| * @arg @ref LL_TIM_COUNTERMODE_DOWN |
| * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP |
| * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN |
| * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_SetCounterMode(TIM_TypeDef *TIMx, uint32_t CounterMode) |
| { |
| MODIFY_REG(TIMx->CR1, (TIM_CR1_DIR | TIM_CR1_CMS), CounterMode); |
| } |
| |
| /** |
| * @brief Get actual counter mode. |
| * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to |
| * check whether or not the counter mode selection feature is supported |
| * by a timer instance. |
| * @rmtoll CR1 DIR LL_TIM_GetCounterMode\n |
| * CR1 CMS LL_TIM_GetCounterMode |
| * @param TIMx Timer instance |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_TIM_COUNTERMODE_UP |
| * @arg @ref LL_TIM_COUNTERMODE_DOWN |
| * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP |
| * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN |
| * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_GetCounterMode(TIM_TypeDef *TIMx) |
| { |
| return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR | TIM_CR1_CMS)); |
| } |
| |
| /** |
| * @brief Enable auto-reload (ARR) preload. |
| * @rmtoll CR1 ARPE LL_TIM_EnableARRPreload |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_EnableARRPreload(TIM_TypeDef *TIMx) |
| { |
| SET_BIT(TIMx->CR1, TIM_CR1_ARPE); |
| } |
| |
| /** |
| * @brief Disable auto-reload (ARR) preload. |
| * @rmtoll CR1 ARPE LL_TIM_DisableARRPreload |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_DisableARRPreload(TIM_TypeDef *TIMx) |
| { |
| CLEAR_BIT(TIMx->CR1, TIM_CR1_ARPE); |
| } |
| |
| /** |
| * @brief Indicates whether auto-reload (ARR) preload is enabled. |
| * @rmtoll CR1 ARPE LL_TIM_IsEnabledARRPreload |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsEnabledARRPreload(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->CR1, TIM_CR1_ARPE) == (TIM_CR1_ARPE)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators (when supported) and the digital filters. |
| * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check |
| * whether or not the clock division feature is supported by the timer |
| * instance. |
| * @rmtoll CR1 CKD LL_TIM_SetClockDivision |
| * @param TIMx Timer instance |
| * @param ClockDivision This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 |
| * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 |
| * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_SetClockDivision(TIM_TypeDef *TIMx, uint32_t ClockDivision) |
| { |
| MODIFY_REG(TIMx->CR1, TIM_CR1_CKD, ClockDivision); |
| } |
| |
| /** |
| * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time generators (when supported) and the digital filters. |
| * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check |
| * whether or not the clock division feature is supported by the timer |
| * instance. |
| * @rmtoll CR1 CKD LL_TIM_GetClockDivision |
| * @param TIMx Timer instance |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 |
| * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 |
| * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_GetClockDivision(TIM_TypeDef *TIMx) |
| { |
| return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CKD)); |
| } |
| |
| /** |
| * @brief Set the counter value. |
| * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports a 32 bits counter. |
| * @rmtoll CNT CNT LL_TIM_SetCounter |
| * @param TIMx Timer instance |
| * @param Counter Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter) |
| { |
| WRITE_REG(TIMx->CNT, Counter); |
| } |
| |
| /** |
| * @brief Get the counter value. |
| * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports a 32 bits counter. |
| * @rmtoll CNT CNT LL_TIM_GetCounter |
| * @param TIMx Timer instance |
| * @retval Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_GetCounter(TIM_TypeDef *TIMx) |
| { |
| return (uint32_t)(READ_REG(TIMx->CNT)); |
| } |
| |
| /** |
| * @brief Get the current direction of the counter |
| * @rmtoll CR1 DIR LL_TIM_GetDirection |
| * @param TIMx Timer instance |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_TIM_COUNTERDIRECTION_UP |
| * @arg @ref LL_TIM_COUNTERDIRECTION_DOWN |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_GetDirection(TIM_TypeDef *TIMx) |
| { |
| return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); |
| } |
| |
| /** |
| * @brief Set the prescaler value. |
| * @note The counter clock frequency CK_CNT is equal to fCK_PSC / (PSC[15:0] + 1). |
| * @note The prescaler can be changed on the fly as this control register is buffered. The new |
| * prescaler ratio is taken into account at the next update event. |
| * @note Helper macro @ref __LL_TIM_CALC_PSC can be used to calculate the Prescaler parameter |
| * @rmtoll PSC PSC LL_TIM_SetPrescaler |
| * @param TIMx Timer instance |
| * @param Prescaler between Min_Data=0 and Max_Data=65535 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Prescaler) |
| { |
| WRITE_REG(TIMx->PSC, Prescaler); |
| } |
| |
| /** |
| * @brief Get the prescaler value. |
| * @rmtoll PSC PSC LL_TIM_GetPrescaler |
| * @param TIMx Timer instance |
| * @retval Prescaler value between Min_Data=0 and Max_Data=65535 |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_GetPrescaler(TIM_TypeDef *TIMx) |
| { |
| return (uint32_t)(READ_REG(TIMx->PSC)); |
| } |
| |
| /** |
| * @brief Set the auto-reload value. |
| * @note The counter is blocked while the auto-reload value is null. |
| * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports a 32 bits counter. |
| * @note Helper macro @ref __LL_TIM_CALC_ARR can be used to calculate the AutoReload parameter |
| * @rmtoll ARR ARR LL_TIM_SetAutoReload |
| * @param TIMx Timer instance |
| * @param AutoReload between Min_Data=0 and Max_Data=65535 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_SetAutoReload(TIM_TypeDef *TIMx, uint32_t AutoReload) |
| { |
| WRITE_REG(TIMx->ARR, AutoReload); |
| } |
| |
| /** |
| * @brief Get the auto-reload value. |
| * @rmtoll ARR ARR LL_TIM_GetAutoReload |
| * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports a 32 bits counter. |
| * @param TIMx Timer instance |
| * @retval Auto-reload value |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_GetAutoReload(TIM_TypeDef *TIMx) |
| { |
| return (uint32_t)(READ_REG(TIMx->ARR)); |
| } |
| |
| /** |
| * @brief Set the repetition counter value. |
| * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports a repetition counter. |
| * @rmtoll RCR REP LL_TIM_SetRepetitionCounter |
| * @param TIMx Timer instance |
| * @param RepetitionCounter between Min_Data=0 and Max_Data=255 or 65535 for advanced timer. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_SetRepetitionCounter(TIM_TypeDef *TIMx, uint32_t RepetitionCounter) |
| { |
| WRITE_REG(TIMx->RCR, RepetitionCounter); |
| } |
| |
| /** |
| * @brief Get the repetition counter value. |
| * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports a repetition counter. |
| * @rmtoll RCR REP LL_TIM_GetRepetitionCounter |
| * @param TIMx Timer instance |
| * @retval Repetition counter value |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_GetRepetitionCounter(TIM_TypeDef *TIMx) |
| { |
| return (uint32_t)(READ_REG(TIMx->RCR)); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EF_Capture_Compare Capture Compare configuration |
| * @{ |
| */ |
| /** |
| * @brief Enable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. |
| * @note CCxE, CCxNE and OCxM bits are preloaded, after having been written, |
| * they are updated only when a commutation event (COM) occurs. |
| * @note Only on channels that have a complementary output. |
| * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance is able to generate a commutation event. |
| * @rmtoll CR2 CCPC LL_TIM_CC_EnablePreload |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_CC_EnablePreload(TIM_TypeDef *TIMx) |
| { |
| SET_BIT(TIMx->CR2, TIM_CR2_CCPC); |
| } |
| |
| /** |
| * @brief Disable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. |
| * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance is able to generate a commutation event. |
| * @rmtoll CR2 CCPC LL_TIM_CC_DisablePreload |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_CC_DisablePreload(TIM_TypeDef *TIMx) |
| { |
| CLEAR_BIT(TIMx->CR2, TIM_CR2_CCPC); |
| } |
| |
| /** |
| * @brief Set the updated source of the capture/compare control bits (CCxE, CCxNE and OCxM). |
| * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance is able to generate a commutation event. |
| * @rmtoll CR2 CCUS LL_TIM_CC_SetUpdate |
| * @param TIMx Timer instance |
| * @param CCUpdateSource This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_ONLY |
| * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_CC_SetUpdate(TIM_TypeDef *TIMx, uint32_t CCUpdateSource) |
| { |
| MODIFY_REG(TIMx->CR2, TIM_CR2_CCUS, CCUpdateSource); |
| } |
| |
| /** |
| * @brief Set the trigger of the capture/compare DMA request. |
| * @rmtoll CR2 CCDS LL_TIM_CC_SetDMAReqTrigger |
| * @param TIMx Timer instance |
| * @param DMAReqTrigger This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CCDMAREQUEST_CC |
| * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_CC_SetDMAReqTrigger(TIM_TypeDef *TIMx, uint32_t DMAReqTrigger) |
| { |
| MODIFY_REG(TIMx->CR2, TIM_CR2_CCDS, DMAReqTrigger); |
| } |
| |
| /** |
| * @brief Get actual trigger of the capture/compare DMA request. |
| * @rmtoll CR2 CCDS LL_TIM_CC_GetDMAReqTrigger |
| * @param TIMx Timer instance |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_TIM_CCDMAREQUEST_CC |
| * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_CC_GetDMAReqTrigger(TIM_TypeDef *TIMx) |
| { |
| return (uint32_t)(READ_BIT(TIMx->CR2, TIM_CR2_CCDS)); |
| } |
| |
| /** |
| * @brief Set the lock level to freeze the |
| * configuration of several capture/compare parameters. |
| * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not |
| * the lock mechanism is supported by a timer instance. |
| * @rmtoll BDTR LOCK LL_TIM_CC_SetLockLevel |
| * @param TIMx Timer instance |
| * @param LockLevel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_LOCKLEVEL_OFF |
| * @arg @ref LL_TIM_LOCKLEVEL_1 |
| * @arg @ref LL_TIM_LOCKLEVEL_2 |
| * @arg @ref LL_TIM_LOCKLEVEL_3 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_CC_SetLockLevel(TIM_TypeDef *TIMx, uint32_t LockLevel) |
| { |
| MODIFY_REG(TIMx->BDTR, TIM_BDTR_LOCK, LockLevel); |
| } |
| |
| /** |
| * @brief Enable capture/compare channels. |
| * @rmtoll CCER CC1E LL_TIM_CC_EnableChannel\n |
| * CCER CC1NE LL_TIM_CC_EnableChannel\n |
| * CCER CC2E LL_TIM_CC_EnableChannel\n |
| * CCER CC2NE LL_TIM_CC_EnableChannel\n |
| * CCER CC3E LL_TIM_CC_EnableChannel\n |
| * CCER CC3NE LL_TIM_CC_EnableChannel\n |
| * CCER CC4E LL_TIM_CC_EnableChannel |
| * @param TIMx Timer instance |
| * @param Channels This parameter can be a combination of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH1N |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH2N |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH3N |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_CC_EnableChannel(TIM_TypeDef *TIMx, uint32_t Channels) |
| { |
| SET_BIT(TIMx->CCER, Channels); |
| } |
| |
| /** |
| * @brief Disable capture/compare channels. |
| * @rmtoll CCER CC1E LL_TIM_CC_DisableChannel\n |
| * CCER CC1NE LL_TIM_CC_DisableChannel\n |
| * CCER CC2E LL_TIM_CC_DisableChannel\n |
| * CCER CC2NE LL_TIM_CC_DisableChannel\n |
| * CCER CC3E LL_TIM_CC_DisableChannel\n |
| * CCER CC3NE LL_TIM_CC_DisableChannel\n |
| * CCER CC4E LL_TIM_CC_DisableChannel |
| * @param TIMx Timer instance |
| * @param Channels This parameter can be a combination of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH1N |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH2N |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH3N |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_CC_DisableChannel(TIM_TypeDef *TIMx, uint32_t Channels) |
| { |
| CLEAR_BIT(TIMx->CCER, Channels); |
| } |
| |
| /** |
| * @brief Indicate whether channel(s) is(are) enabled. |
| * @rmtoll CCER CC1E LL_TIM_CC_IsEnabledChannel\n |
| * CCER CC1NE LL_TIM_CC_IsEnabledChannel\n |
| * CCER CC2E LL_TIM_CC_IsEnabledChannel\n |
| * CCER CC2NE LL_TIM_CC_IsEnabledChannel\n |
| * CCER CC3E LL_TIM_CC_IsEnabledChannel\n |
| * CCER CC3NE LL_TIM_CC_IsEnabledChannel\n |
| * CCER CC4E LL_TIM_CC_IsEnabledChannel |
| * @param TIMx Timer instance |
| * @param Channels This parameter can be a combination of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH1N |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH2N |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH3N |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledChannel(TIM_TypeDef *TIMx, uint32_t Channels) |
| { |
| return ((READ_BIT(TIMx->CCER, Channels) == (Channels)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EF_Output_Channel Output channel configuration |
| * @{ |
| */ |
| /** |
| * @brief Configure an output channel. |
| * @rmtoll CCMR1 CC1S LL_TIM_OC_ConfigOutput\n |
| * CCMR1 CC2S LL_TIM_OC_ConfigOutput\n |
| * CCMR2 CC3S LL_TIM_OC_ConfigOutput\n |
| * CCMR2 CC4S LL_TIM_OC_ConfigOutput\n |
| * CCER CC1P LL_TIM_OC_ConfigOutput\n |
| * CCER CC2P LL_TIM_OC_ConfigOutput\n |
| * CCER CC3P LL_TIM_OC_ConfigOutput\n |
| * CCER CC4P LL_TIM_OC_ConfigOutput\n |
| * CR2 OIS1 LL_TIM_OC_ConfigOutput\n |
| * CR2 OIS2 LL_TIM_OC_ConfigOutput\n |
| * CR2 OIS3 LL_TIM_OC_ConfigOutput\n |
| * CR2 OIS4 LL_TIM_OC_ConfigOutput |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @param Configuration This parameter must be a combination of all the following values: |
| * @arg @ref LL_TIM_OCPOLARITY_HIGH or @ref LL_TIM_OCPOLARITY_LOW |
| * @arg @ref LL_TIM_OCIDLESTATE_LOW or @ref LL_TIM_OCIDLESTATE_HIGH |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_OC_ConfigOutput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| CLEAR_BIT(*pReg, (TIM_CCMR1_CC1S << SHIFT_TAB_OCxx[iChannel])); |
| MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), |
| (Configuration & TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]); |
| MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), |
| (Configuration & TIM_CR2_OIS1) << SHIFT_TAB_OISx[iChannel]); |
| } |
| |
| /** |
| * @brief Define the behavior of the output reference signal OCxREF from which |
| * OCx and OCxN (when relevant) are derived. |
| * @rmtoll CCMR1 OC1M LL_TIM_OC_SetMode\n |
| * CCMR1 OC2M LL_TIM_OC_SetMode\n |
| * CCMR2 OC3M LL_TIM_OC_SetMode\n |
| * CCMR2 OC4M LL_TIM_OC_SetMode |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @param Mode This parameter can be one of the following values: |
| * @arg @ref LL_TIM_OCMODE_FROZEN |
| * @arg @ref LL_TIM_OCMODE_ACTIVE |
| * @arg @ref LL_TIM_OCMODE_INACTIVE |
| * @arg @ref LL_TIM_OCMODE_TOGGLE |
| * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE |
| * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE |
| * @arg @ref LL_TIM_OCMODE_PWM1 |
| * @arg @ref LL_TIM_OCMODE_PWM2 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Mode) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]); |
| } |
| |
| /** |
| * @brief Get the output compare mode of an output channel. |
| * @rmtoll CCMR1 OC1M LL_TIM_OC_GetMode\n |
| * CCMR1 OC2M LL_TIM_OC_GetMode\n |
| * CCMR2 OC3M LL_TIM_OC_GetMode\n |
| * CCMR2 OC4M LL_TIM_OC_GetMode |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_TIM_OCMODE_FROZEN |
| * @arg @ref LL_TIM_OCMODE_ACTIVE |
| * @arg @ref LL_TIM_OCMODE_INACTIVE |
| * @arg @ref LL_TIM_OCMODE_TOGGLE |
| * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE |
| * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE |
| * @arg @ref LL_TIM_OCMODE_PWM1 |
| * @arg @ref LL_TIM_OCMODE_PWM2 |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_OC_GetMode(TIM_TypeDef *TIMx, uint32_t Channel) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]); |
| } |
| |
| /** |
| * @brief Set the polarity of an output channel. |
| * @rmtoll CCER CC1P LL_TIM_OC_SetPolarity\n |
| * CCER CC1NP LL_TIM_OC_SetPolarity\n |
| * CCER CC2P LL_TIM_OC_SetPolarity\n |
| * CCER CC2NP LL_TIM_OC_SetPolarity\n |
| * CCER CC3P LL_TIM_OC_SetPolarity\n |
| * CCER CC3NP LL_TIM_OC_SetPolarity\n |
| * CCER CC4P LL_TIM_OC_SetPolarity |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH1N |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH2N |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH3N |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @param Polarity This parameter can be one of the following values: |
| * @arg @ref LL_TIM_OCPOLARITY_HIGH |
| * @arg @ref LL_TIM_OCPOLARITY_LOW |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_OC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Polarity) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), Polarity << SHIFT_TAB_CCxP[iChannel]); |
| } |
| |
| /** |
| * @brief Get the polarity of an output channel. |
| * @rmtoll CCER CC1P LL_TIM_OC_GetPolarity\n |
| * CCER CC1NP LL_TIM_OC_GetPolarity\n |
| * CCER CC2P LL_TIM_OC_GetPolarity\n |
| * CCER CC2NP LL_TIM_OC_GetPolarity\n |
| * CCER CC3P LL_TIM_OC_GetPolarity\n |
| * CCER CC3NP LL_TIM_OC_GetPolarity\n |
| * CCER CC4P LL_TIM_OC_GetPolarity |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH1N |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH2N |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH3N |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_TIM_OCPOLARITY_HIGH |
| * @arg @ref LL_TIM_OCPOLARITY_LOW |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| return (READ_BIT(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel])) >> SHIFT_TAB_CCxP[iChannel]); |
| } |
| |
| /** |
| * @brief Set the IDLE state of an output channel |
| * @note This function is significant only for the timer instances |
| * supporting the break feature. Macro IS_TIM_BREAK_INSTANCE(TIMx) |
| * can be used to check whether or not a timer instance provides |
| * a break input. |
| * @rmtoll CR2 OIS1 LL_TIM_OC_SetIdleState\n |
| * CR2 OIS1N LL_TIM_OC_SetIdleState\n |
| * CR2 OIS2 LL_TIM_OC_SetIdleState\n |
| * CR2 OIS2N LL_TIM_OC_SetIdleState\n |
| * CR2 OIS3 LL_TIM_OC_SetIdleState\n |
| * CR2 OIS3N LL_TIM_OC_SetIdleState\n |
| * CR2 OIS4 LL_TIM_OC_SetIdleState |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH1N |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH2N |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH3N |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @param IdleState This parameter can be one of the following values: |
| * @arg @ref LL_TIM_OCIDLESTATE_LOW |
| * @arg @ref LL_TIM_OCIDLESTATE_HIGH |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_OC_SetIdleState(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t IdleState) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), IdleState << SHIFT_TAB_OISx[iChannel]); |
| } |
| |
| /** |
| * @brief Get the IDLE state of an output channel |
| * @rmtoll CR2 OIS1 LL_TIM_OC_GetIdleState\n |
| * CR2 OIS1N LL_TIM_OC_GetIdleState\n |
| * CR2 OIS2 LL_TIM_OC_GetIdleState\n |
| * CR2 OIS2N LL_TIM_OC_GetIdleState\n |
| * CR2 OIS3 LL_TIM_OC_GetIdleState\n |
| * CR2 OIS3N LL_TIM_OC_GetIdleState\n |
| * CR2 OIS4 LL_TIM_OC_GetIdleState |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH1N |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH2N |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH3N |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_TIM_OCIDLESTATE_LOW |
| * @arg @ref LL_TIM_OCIDLESTATE_HIGH |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_OC_GetIdleState(TIM_TypeDef *TIMx, uint32_t Channel) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| return (READ_BIT(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel])) >> SHIFT_TAB_OISx[iChannel]); |
| } |
| |
| /** |
| * @brief Enable fast mode for the output channel. |
| * @note Acts only if the channel is configured in PWM1 or PWM2 mode. |
| * @rmtoll CCMR1 OC1FE LL_TIM_OC_EnableFast\n |
| * CCMR1 OC2FE LL_TIM_OC_EnableFast\n |
| * CCMR2 OC3FE LL_TIM_OC_EnableFast\n |
| * CCMR2 OC4FE LL_TIM_OC_EnableFast |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_OC_EnableFast(TIM_TypeDef *TIMx, uint32_t Channel) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| SET_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); |
| |
| } |
| |
| /** |
| * @brief Disable fast mode for the output channel. |
| * @rmtoll CCMR1 OC1FE LL_TIM_OC_DisableFast\n |
| * CCMR1 OC2FE LL_TIM_OC_DisableFast\n |
| * CCMR2 OC3FE LL_TIM_OC_DisableFast\n |
| * CCMR2 OC4FE LL_TIM_OC_DisableFast |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_OC_DisableFast(TIM_TypeDef *TIMx, uint32_t Channel) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| CLEAR_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); |
| |
| } |
| |
| /** |
| * @brief Indicates whether fast mode is enabled for the output channel. |
| * @rmtoll CCMR1 OC1FE LL_TIM_OC_IsEnabledFast\n |
| * CCMR1 OC2FE LL_TIM_OC_IsEnabledFast\n |
| * CCMR2 OC3FE LL_TIM_OC_IsEnabledFast\n |
| * CCMR2 OC4FE LL_TIM_OC_IsEnabledFast\n |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(TIM_TypeDef *TIMx, uint32_t Channel) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]; |
| return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Enable compare register (TIMx_CCRx) preload for the output channel. |
| * @rmtoll CCMR1 OC1PE LL_TIM_OC_EnablePreload\n |
| * CCMR1 OC2PE LL_TIM_OC_EnablePreload\n |
| * CCMR2 OC3PE LL_TIM_OC_EnablePreload\n |
| * CCMR2 OC4PE LL_TIM_OC_EnablePreload |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_OC_EnablePreload(TIM_TypeDef *TIMx, uint32_t Channel) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| SET_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); |
| } |
| |
| /** |
| * @brief Disable compare register (TIMx_CCRx) preload for the output channel. |
| * @rmtoll CCMR1 OC1PE LL_TIM_OC_DisablePreload\n |
| * CCMR1 OC2PE LL_TIM_OC_DisablePreload\n |
| * CCMR2 OC3PE LL_TIM_OC_DisablePreload\n |
| * CCMR2 OC4PE LL_TIM_OC_DisablePreload |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_OC_DisablePreload(TIM_TypeDef *TIMx, uint32_t Channel) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| CLEAR_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); |
| } |
| |
| /** |
| * @brief Indicates whether compare register (TIMx_CCRx) preload is enabled for the output channel. |
| * @rmtoll CCMR1 OC1PE LL_TIM_OC_IsEnabledPreload\n |
| * CCMR1 OC2PE LL_TIM_OC_IsEnabledPreload\n |
| * CCMR2 OC3PE LL_TIM_OC_IsEnabledPreload\n |
| * CCMR2 OC4PE LL_TIM_OC_IsEnabledPreload\n |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(TIM_TypeDef *TIMx, uint32_t Channel) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]; |
| return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Enable clearing the output channel on an external event. |
| * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. |
| * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether |
| * or not a timer instance can clear the OCxREF signal on an external event. |
| * @rmtoll CCMR1 OC1CE LL_TIM_OC_EnableClear\n |
| * CCMR1 OC2CE LL_TIM_OC_EnableClear\n |
| * CCMR2 OC3CE LL_TIM_OC_EnableClear\n |
| * CCMR2 OC4CE LL_TIM_OC_EnableClear |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| SET_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); |
| } |
| |
| /** |
| * @brief Disable clearing the output channel on an external event. |
| * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether |
| * or not a timer instance can clear the OCxREF signal on an external event. |
| * @rmtoll CCMR1 OC1CE LL_TIM_OC_DisableClear\n |
| * CCMR1 OC2CE LL_TIM_OC_DisableClear\n |
| * CCMR2 OC3CE LL_TIM_OC_DisableClear\n |
| * CCMR2 OC4CE LL_TIM_OC_DisableClear |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| CLEAR_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); |
| } |
| |
| /** |
| * @brief Indicates clearing the output channel on an external event is enabled for the output channel. |
| * @note This function enables clearing the output channel on an external event. |
| * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. |
| * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether |
| * or not a timer instance can clear the OCxREF signal on an external event. |
| * @rmtoll CCMR1 OC1CE LL_TIM_OC_IsEnabledClear\n |
| * CCMR1 OC2CE LL_TIM_OC_IsEnabledClear\n |
| * CCMR2 OC3CE LL_TIM_OC_IsEnabledClear\n |
| * CCMR2 OC4CE LL_TIM_OC_IsEnabledClear\n |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(TIM_TypeDef *TIMx, uint32_t Channel) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]; |
| return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of the Ocx and OCxN signals). |
| * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not |
| * dead-time insertion feature is supported by a timer instance. |
| * @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter |
| * @rmtoll BDTR DTG LL_TIM_OC_SetDeadTime |
| * @param TIMx Timer instance |
| * @param DeadTime between Min_Data=0 and Max_Data=255 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_OC_SetDeadTime(TIM_TypeDef *TIMx, uint32_t DeadTime) |
| { |
| MODIFY_REG(TIMx->BDTR, TIM_BDTR_DTG, DeadTime); |
| } |
| |
| /** |
| * @brief Set compare value for output channel 1 (TIMx_CCR1). |
| * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. |
| * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports a 32 bits counter. |
| * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not |
| * output channel 1 is supported by a timer instance. |
| * @rmtoll CCR1 CCR1 LL_TIM_OC_SetCompareCH1 |
| * @param TIMx Timer instance |
| * @param CompareValue between Min_Data=0 and Max_Data=65535 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_OC_SetCompareCH1(TIM_TypeDef *TIMx, uint32_t CompareValue) |
| { |
| WRITE_REG(TIMx->CCR1, CompareValue); |
| } |
| |
| /** |
| * @brief Set compare value for output channel 2 (TIMx_CCR2). |
| * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. |
| * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports a 32 bits counter. |
| * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not |
| * output channel 2 is supported by a timer instance. |
| * @rmtoll CCR2 CCR2 LL_TIM_OC_SetCompareCH2 |
| * @param TIMx Timer instance |
| * @param CompareValue between Min_Data=0 and Max_Data=65535 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_OC_SetCompareCH2(TIM_TypeDef *TIMx, uint32_t CompareValue) |
| { |
| WRITE_REG(TIMx->CCR2, CompareValue); |
| } |
| |
| /** |
| * @brief Set compare value for output channel 3 (TIMx_CCR3). |
| * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. |
| * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports a 32 bits counter. |
| * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not |
| * output channel is supported by a timer instance. |
| * @rmtoll CCR3 CCR3 LL_TIM_OC_SetCompareCH3 |
| * @param TIMx Timer instance |
| * @param CompareValue between Min_Data=0 and Max_Data=65535 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_OC_SetCompareCH3(TIM_TypeDef *TIMx, uint32_t CompareValue) |
| { |
| WRITE_REG(TIMx->CCR3, CompareValue); |
| } |
| |
| /** |
| * @brief Set compare value for output channel 4 (TIMx_CCR4). |
| * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. |
| * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports a 32 bits counter. |
| * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not |
| * output channel 4 is supported by a timer instance. |
| * @rmtoll CCR4 CCR4 LL_TIM_OC_SetCompareCH4 |
| * @param TIMx Timer instance |
| * @param CompareValue between Min_Data=0 and Max_Data=65535 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_OC_SetCompareCH4(TIM_TypeDef *TIMx, uint32_t CompareValue) |
| { |
| WRITE_REG(TIMx->CCR4, CompareValue); |
| } |
| |
| /** |
| * @brief Get compare value (TIMx_CCR1) set for output channel 1. |
| * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. |
| * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports a 32 bits counter. |
| * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not |
| * output channel 1 is supported by a timer instance. |
| * @rmtoll CCR1 CCR1 LL_TIM_OC_GetCompareCH1 |
| * @param TIMx Timer instance |
| * @retval CompareValue (between Min_Data=0 and Max_Data=65535) |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH1(TIM_TypeDef *TIMx) |
| { |
| return (uint32_t)(READ_REG(TIMx->CCR1)); |
| } |
| |
| /** |
| * @brief Get compare value (TIMx_CCR2) set for output channel 2. |
| * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. |
| * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports a 32 bits counter. |
| * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not |
| * output channel 2 is supported by a timer instance. |
| * @rmtoll CCR2 CCR2 LL_TIM_OC_GetCompareCH2 |
| * @param TIMx Timer instance |
| * @retval CompareValue (between Min_Data=0 and Max_Data=65535) |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH2(TIM_TypeDef *TIMx) |
| { |
| return (uint32_t)(READ_REG(TIMx->CCR2)); |
| } |
| |
| /** |
| * @brief Get compare value (TIMx_CCR3) set for output channel 3. |
| * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. |
| * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports a 32 bits counter. |
| * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not |
| * output channel 3 is supported by a timer instance. |
| * @rmtoll CCR3 CCR3 LL_TIM_OC_GetCompareCH3 |
| * @param TIMx Timer instance |
| * @retval CompareValue (between Min_Data=0 and Max_Data=65535) |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH3(TIM_TypeDef *TIMx) |
| { |
| return (uint32_t)(READ_REG(TIMx->CCR3)); |
| } |
| |
| /** |
| * @brief Get compare value (TIMx_CCR4) set for output channel 4. |
| * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. |
| * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports a 32 bits counter. |
| * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not |
| * output channel 4 is supported by a timer instance. |
| * @rmtoll CCR4 CCR4 LL_TIM_OC_GetCompareCH4 |
| * @param TIMx Timer instance |
| * @retval CompareValue (between Min_Data=0 and Max_Data=65535) |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH4(TIM_TypeDef *TIMx) |
| { |
| return (uint32_t)(READ_REG(TIMx->CCR4)); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EF_Input_Channel Input channel configuration |
| * @{ |
| */ |
| /** |
| * @brief Configure input channel. |
| * @rmtoll CCMR1 CC1S LL_TIM_IC_Config\n |
| * CCMR1 IC1PSC LL_TIM_IC_Config\n |
| * CCMR1 IC1F LL_TIM_IC_Config\n |
| * CCMR1 CC2S LL_TIM_IC_Config\n |
| * CCMR1 IC2PSC LL_TIM_IC_Config\n |
| * CCMR1 IC2F LL_TIM_IC_Config\n |
| * CCMR2 CC3S LL_TIM_IC_Config\n |
| * CCMR2 IC3PSC LL_TIM_IC_Config\n |
| * CCMR2 IC3F LL_TIM_IC_Config\n |
| * CCMR2 CC4S LL_TIM_IC_Config\n |
| * CCMR2 IC4PSC LL_TIM_IC_Config\n |
| * CCMR2 IC4F LL_TIM_IC_Config\n |
| * CCER CC1P LL_TIM_IC_Config\n |
| * CCER CC1NP LL_TIM_IC_Config\n |
| * CCER CC2P LL_TIM_IC_Config\n |
| * CCER CC2NP LL_TIM_IC_Config\n |
| * CCER CC3P LL_TIM_IC_Config\n |
| * CCER CC3NP LL_TIM_IC_Config\n |
| * CCER CC4P LL_TIM_IC_Config\n |
| * CCER CC4NP LL_TIM_IC_Config |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @param Configuration This parameter must be a combination of all the following values: |
| * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI or @ref LL_TIM_ACTIVEINPUT_INDIRECTTI or @ref LL_TIM_ACTIVEINPUT_TRC |
| * @arg @ref LL_TIM_ICPSC_DIV1 or ... or @ref LL_TIM_ICPSC_DIV8 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV1 or ... or @ref LL_TIM_IC_FILTER_FDIV32_N8 |
| * @arg @ref LL_TIM_IC_POLARITY_RISING or @ref LL_TIM_IC_POLARITY_FALLING or @ref LL_TIM_IC_POLARITY_BOTHEDGE |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), |
| ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) << SHIFT_TAB_ICxx[iChannel]); |
| MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), |
| (Configuration & (TIM_CCER_CC1NP | TIM_CCER_CC1P)) << SHIFT_TAB_CCxP[iChannel]); |
| } |
| |
| /** |
| * @brief Set the active input. |
| * @rmtoll CCMR1 CC1S LL_TIM_IC_SetActiveInput\n |
| * CCMR1 CC2S LL_TIM_IC_SetActiveInput\n |
| * CCMR2 CC3S LL_TIM_IC_SetActiveInput\n |
| * CCMR2 CC4S LL_TIM_IC_SetActiveInput |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @param ICActiveInput This parameter can be one of the following values: |
| * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI |
| * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI |
| * @arg @ref LL_TIM_ACTIVEINPUT_TRC |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_IC_SetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICActiveInput) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| MODIFY_REG(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), (ICActiveInput >> 16U) << SHIFT_TAB_ICxx[iChannel]); |
| } |
| |
| /** |
| * @brief Get the current active input. |
| * @rmtoll CCMR1 CC1S LL_TIM_IC_GetActiveInput\n |
| * CCMR1 CC2S LL_TIM_IC_GetActiveInput\n |
| * CCMR2 CC3S LL_TIM_IC_GetActiveInput\n |
| * CCMR2 CC4S LL_TIM_IC_GetActiveInput |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI |
| * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI |
| * @arg @ref LL_TIM_ACTIVEINPUT_TRC |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IC_GetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| return ((READ_BIT(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); |
| } |
| |
| /** |
| * @brief Set the prescaler of input channel. |
| * @rmtoll CCMR1 IC1PSC LL_TIM_IC_SetPrescaler\n |
| * CCMR1 IC2PSC LL_TIM_IC_SetPrescaler\n |
| * CCMR2 IC3PSC LL_TIM_IC_SetPrescaler\n |
| * CCMR2 IC4PSC LL_TIM_IC_SetPrescaler |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @param ICPrescaler This parameter can be one of the following values: |
| * @arg @ref LL_TIM_ICPSC_DIV1 |
| * @arg @ref LL_TIM_ICPSC_DIV2 |
| * @arg @ref LL_TIM_ICPSC_DIV4 |
| * @arg @ref LL_TIM_ICPSC_DIV8 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_IC_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPrescaler) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| MODIFY_REG(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel]), (ICPrescaler >> 16U) << SHIFT_TAB_ICxx[iChannel]); |
| } |
| |
| /** |
| * @brief Get the current prescaler value acting on an input channel. |
| * @rmtoll CCMR1 IC1PSC LL_TIM_IC_GetPrescaler\n |
| * CCMR1 IC2PSC LL_TIM_IC_GetPrescaler\n |
| * CCMR2 IC3PSC LL_TIM_IC_GetPrescaler\n |
| * CCMR2 IC4PSC LL_TIM_IC_GetPrescaler |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_TIM_ICPSC_DIV1 |
| * @arg @ref LL_TIM_ICPSC_DIV2 |
| * @arg @ref LL_TIM_ICPSC_DIV4 |
| * @arg @ref LL_TIM_ICPSC_DIV8 |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IC_GetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); |
| } |
| |
| /** |
| * @brief Set the input filter duration. |
| * @rmtoll CCMR1 IC1F LL_TIM_IC_SetFilter\n |
| * CCMR1 IC2F LL_TIM_IC_SetFilter\n |
| * CCMR2 IC3F LL_TIM_IC_SetFilter\n |
| * CCMR2 IC4F LL_TIM_IC_SetFilter |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @param ICFilter This parameter can be one of the following values: |
| * @arg @ref LL_TIM_IC_FILTER_FDIV1 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_IC_SetFilter(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICFilter) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel]), (ICFilter >> 16U) << SHIFT_TAB_ICxx[iChannel]); |
| } |
| |
| /** |
| * @brief Get the input filter duration. |
| * @rmtoll CCMR1 IC1F LL_TIM_IC_GetFilter\n |
| * CCMR1 IC2F LL_TIM_IC_GetFilter\n |
| * CCMR2 IC3F LL_TIM_IC_GetFilter\n |
| * CCMR2 IC4F LL_TIM_IC_GetFilter |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_TIM_IC_FILTER_FDIV1 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 |
| * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(TIM_TypeDef *TIMx, uint32_t Channel) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); |
| return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); |
| } |
| |
| /** |
| * @brief Set the input channel polarity. |
| * @rmtoll CCER CC1P LL_TIM_IC_SetPolarity\n |
| * CCER CC1NP LL_TIM_IC_SetPolarity\n |
| * CCER CC2P LL_TIM_IC_SetPolarity\n |
| * CCER CC2NP LL_TIM_IC_SetPolarity\n |
| * CCER CC3P LL_TIM_IC_SetPolarity\n |
| * CCER CC3NP LL_TIM_IC_SetPolarity\n |
| * CCER CC4P LL_TIM_IC_SetPolarity\n |
| * CCER CC4NP LL_TIM_IC_SetPolarity |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @param ICPolarity This parameter can be one of the following values: |
| * @arg @ref LL_TIM_IC_POLARITY_RISING |
| * @arg @ref LL_TIM_IC_POLARITY_FALLING |
| * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPolarity) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), |
| ICPolarity << SHIFT_TAB_CCxP[iChannel]); |
| } |
| |
| /** |
| * @brief Get the current input channel polarity. |
| * @rmtoll CCER CC1P LL_TIM_IC_GetPolarity\n |
| * CCER CC1NP LL_TIM_IC_GetPolarity\n |
| * CCER CC2P LL_TIM_IC_GetPolarity\n |
| * CCER CC2NP LL_TIM_IC_GetPolarity\n |
| * CCER CC3P LL_TIM_IC_GetPolarity\n |
| * CCER CC3NP LL_TIM_IC_GetPolarity\n |
| * CCER CC4P LL_TIM_IC_GetPolarity\n |
| * CCER CC4NP LL_TIM_IC_GetPolarity |
| * @param TIMx Timer instance |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CHANNEL_CH1 |
| * @arg @ref LL_TIM_CHANNEL_CH2 |
| * @arg @ref LL_TIM_CHANNEL_CH3 |
| * @arg @ref LL_TIM_CHANNEL_CH4 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_TIM_IC_POLARITY_RISING |
| * @arg @ref LL_TIM_IC_POLARITY_FALLING |
| * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(TIM_TypeDef *TIMx, uint32_t Channel) |
| { |
| uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); |
| return (READ_BIT(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel])) >> |
| SHIFT_TAB_CCxP[iChannel]); |
| } |
| |
| /** |
| * @brief Connect the TIMx_CH1, CH2 and CH3 pins to the TI1 input (XOR combination). |
| * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance provides an XOR input. |
| * @rmtoll CR2 TI1S LL_TIM_IC_EnableXORCombination |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_IC_EnableXORCombination(TIM_TypeDef *TIMx) |
| { |
| SET_BIT(TIMx->CR2, TIM_CR2_TI1S); |
| } |
| |
| /** |
| * @brief Disconnect the TIMx_CH1, CH2 and CH3 pins from the TI1 input. |
| * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance provides an XOR input. |
| * @rmtoll CR2 TI1S LL_TIM_IC_DisableXORCombination |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_IC_DisableXORCombination(TIM_TypeDef *TIMx) |
| { |
| CLEAR_BIT(TIMx->CR2, TIM_CR2_TI1S); |
| } |
| |
| /** |
| * @brief Indicates whether the TIMx_CH1, CH2 and CH3 pins are connectected to the TI1 input. |
| * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance provides an XOR input. |
| * @rmtoll CR2 TI1S LL_TIM_IC_IsEnabledXORCombination |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->CR2, TIM_CR2_TI1S) == (TIM_CR2_TI1S)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Get captured value for input channel 1. |
| * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. |
| * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports a 32 bits counter. |
| * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not |
| * input channel 1 is supported by a timer instance. |
| * @rmtoll CCR1 CCR1 LL_TIM_IC_GetCaptureCH1 |
| * @param TIMx Timer instance |
| * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH1(TIM_TypeDef *TIMx) |
| { |
| return (uint32_t)(READ_REG(TIMx->CCR1)); |
| } |
| |
| /** |
| * @brief Get captured value for input channel 2. |
| * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. |
| * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports a 32 bits counter. |
| * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not |
| * input channel 2 is supported by a timer instance. |
| * @rmtoll CCR2 CCR2 LL_TIM_IC_GetCaptureCH2 |
| * @param TIMx Timer instance |
| * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH2(TIM_TypeDef *TIMx) |
| { |
| return (uint32_t)(READ_REG(TIMx->CCR2)); |
| } |
| |
| /** |
| * @brief Get captured value for input channel 3. |
| * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. |
| * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports a 32 bits counter. |
| * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not |
| * input channel 3 is supported by a timer instance. |
| * @rmtoll CCR3 CCR3 LL_TIM_IC_GetCaptureCH3 |
| * @param TIMx Timer instance |
| * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH3(TIM_TypeDef *TIMx) |
| { |
| return (uint32_t)(READ_REG(TIMx->CCR3)); |
| } |
| |
| /** |
| * @brief Get captured value for input channel 4. |
| * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. |
| * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports a 32 bits counter. |
| * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not |
| * input channel 4 is supported by a timer instance. |
| * @rmtoll CCR4 CCR4 LL_TIM_IC_GetCaptureCH4 |
| * @param TIMx Timer instance |
| * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH4(TIM_TypeDef *TIMx) |
| { |
| return (uint32_t)(READ_REG(TIMx->CCR4)); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EF_Clock_Selection Counter clock selection |
| * @{ |
| */ |
| /** |
| * @brief Enable external clock mode 2. |
| * @note When external clock mode 2 is enabled the counter is clocked by any active edge on the ETRF signal. |
| * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports external clock mode2. |
| * @rmtoll SMCR ECE LL_TIM_EnableExternalClock |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_EnableExternalClock(TIM_TypeDef *TIMx) |
| { |
| SET_BIT(TIMx->SMCR, TIM_SMCR_ECE); |
| } |
| |
| /** |
| * @brief Disable external clock mode 2. |
| * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports external clock mode2. |
| * @rmtoll SMCR ECE LL_TIM_DisableExternalClock |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_DisableExternalClock(TIM_TypeDef *TIMx) |
| { |
| CLEAR_BIT(TIMx->SMCR, TIM_SMCR_ECE); |
| } |
| |
| /** |
| * @brief Indicate whether external clock mode 2 is enabled. |
| * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports external clock mode2. |
| * @rmtoll SMCR ECE LL_TIM_IsEnabledExternalClock |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsEnabledExternalClock(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->SMCR, TIM_SMCR_ECE) == (TIM_SMCR_ECE)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Set the clock source of the counter clock. |
| * @note when selected clock source is external clock mode 1, the timer input |
| * the external clock is applied is selected by calling the @ref LL_TIM_SetTriggerInput() |
| * function. This timer input must be configured by calling |
| * the @ref LL_TIM_IC_Config() function. |
| * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports external clock mode1. |
| * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports external clock mode2. |
| * @rmtoll SMCR SMS LL_TIM_SetClockSource\n |
| * SMCR ECE LL_TIM_SetClockSource |
| * @param TIMx Timer instance |
| * @param ClockSource This parameter can be one of the following values: |
| * @arg @ref LL_TIM_CLOCKSOURCE_INTERNAL |
| * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE1 |
| * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE2 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_SetClockSource(TIM_TypeDef *TIMx, uint32_t ClockSource) |
| { |
| MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS | TIM_SMCR_ECE, ClockSource); |
| } |
| |
| /** |
| * @brief Set the encoder interface mode. |
| * @note Macro IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance supports the encoder mode. |
| * @rmtoll SMCR SMS LL_TIM_SetEncoderMode |
| * @param TIMx Timer instance |
| * @param EncoderMode This parameter can be one of the following values: |
| * @arg @ref LL_TIM_ENCODERMODE_X2_TI1 |
| * @arg @ref LL_TIM_ENCODERMODE_X2_TI2 |
| * @arg @ref LL_TIM_ENCODERMODE_X4_TI12 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_SetEncoderMode(TIM_TypeDef *TIMx, uint32_t EncoderMode) |
| { |
| MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, EncoderMode); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EF_Timer_Synchronization Timer synchronisation configuration |
| * @{ |
| */ |
| /** |
| * @brief Set the trigger output (TRGO) used for timer synchronization . |
| * @note Macro IS_TIM_MASTER_INSTANCE(TIMx) can be used to check |
| * whether or not a timer instance can operate as a master timer. |
| * @rmtoll CR2 MMS LL_TIM_SetTriggerOutput |
| * @param TIMx Timer instance |
| * @param TimerSynchronization This parameter can be one of the following values: |
| * @arg @ref LL_TIM_TRGO_RESET |
| * @arg @ref LL_TIM_TRGO_ENABLE |
| * @arg @ref LL_TIM_TRGO_UPDATE |
| * @arg @ref LL_TIM_TRGO_CC1IF |
| * @arg @ref LL_TIM_TRGO_OC1REF |
| * @arg @ref LL_TIM_TRGO_OC2REF |
| * @arg @ref LL_TIM_TRGO_OC3REF |
| * @arg @ref LL_TIM_TRGO_OC4REF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_SetTriggerOutput(TIM_TypeDef *TIMx, uint32_t TimerSynchronization) |
| { |
| MODIFY_REG(TIMx->CR2, TIM_CR2_MMS, TimerSynchronization); |
| } |
| |
| /** |
| * @brief Set the synchronization mode of a slave timer. |
| * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance can operate as a slave timer. |
| * @rmtoll SMCR SMS LL_TIM_SetSlaveMode |
| * @param TIMx Timer instance |
| * @param SlaveMode This parameter can be one of the following values: |
| * @arg @ref LL_TIM_SLAVEMODE_DISABLED |
| * @arg @ref LL_TIM_SLAVEMODE_RESET |
| * @arg @ref LL_TIM_SLAVEMODE_GATED |
| * @arg @ref LL_TIM_SLAVEMODE_TRIGGER |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_SetSlaveMode(TIM_TypeDef *TIMx, uint32_t SlaveMode) |
| { |
| MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, SlaveMode); |
| } |
| |
| /** |
| * @brief Set the selects the trigger input to be used to synchronize the counter. |
| * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance can operate as a slave timer. |
| * @rmtoll SMCR TS LL_TIM_SetTriggerInput |
| * @param TIMx Timer instance |
| * @param TriggerInput This parameter can be one of the following values: |
| * @arg @ref LL_TIM_TS_ITR0 |
| * @arg @ref LL_TIM_TS_ITR1 |
| * @arg @ref LL_TIM_TS_ITR2 |
| * @arg @ref LL_TIM_TS_ITR3 |
| * @arg @ref LL_TIM_TS_TI1F_ED |
| * @arg @ref LL_TIM_TS_TI1FP1 |
| * @arg @ref LL_TIM_TS_TI2FP2 |
| * @arg @ref LL_TIM_TS_ETRF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_SetTriggerInput(TIM_TypeDef *TIMx, uint32_t TriggerInput) |
| { |
| MODIFY_REG(TIMx->SMCR, TIM_SMCR_TS, TriggerInput); |
| } |
| |
| /** |
| * @brief Enable the Master/Slave mode. |
| * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance can operate as a slave timer. |
| * @rmtoll SMCR MSM LL_TIM_EnableMasterSlaveMode |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_EnableMasterSlaveMode(TIM_TypeDef *TIMx) |
| { |
| SET_BIT(TIMx->SMCR, TIM_SMCR_MSM); |
| } |
| |
| /** |
| * @brief Disable the Master/Slave mode. |
| * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance can operate as a slave timer. |
| * @rmtoll SMCR MSM LL_TIM_DisableMasterSlaveMode |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_DisableMasterSlaveMode(TIM_TypeDef *TIMx) |
| { |
| CLEAR_BIT(TIMx->SMCR, TIM_SMCR_MSM); |
| } |
| |
| /** |
| * @brief Indicates whether the Master/Slave mode is enabled. |
| * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance can operate as a slave timer. |
| * @rmtoll SMCR MSM LL_TIM_IsEnabledMasterSlaveMode |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsEnabledMasterSlaveMode(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->SMCR, TIM_SMCR_MSM) == (TIM_SMCR_MSM)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Configure the external trigger (ETR) input. |
| * @note Macro IS_TIM_ETR_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance provides an external trigger input. |
| * @rmtoll SMCR ETP LL_TIM_ConfigETR\n |
| * SMCR ETPS LL_TIM_ConfigETR\n |
| * SMCR ETF LL_TIM_ConfigETR |
| * @param TIMx Timer instance |
| * @param ETRPolarity This parameter can be one of the following values: |
| * @arg @ref LL_TIM_ETR_POLARITY_NONINVERTED |
| * @arg @ref LL_TIM_ETR_POLARITY_INVERTED |
| * @param ETRPrescaler This parameter can be one of the following values: |
| * @arg @ref LL_TIM_ETR_PRESCALER_DIV1 |
| * @arg @ref LL_TIM_ETR_PRESCALER_DIV2 |
| * @arg @ref LL_TIM_ETR_PRESCALER_DIV4 |
| * @arg @ref LL_TIM_ETR_PRESCALER_DIV8 |
| * @param ETRFilter This parameter can be one of the following values: |
| * @arg @ref LL_TIM_ETR_FILTER_FDIV1 |
| * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N2 |
| * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N4 |
| * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N8 |
| * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N6 |
| * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N8 |
| * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N6 |
| * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N8 |
| * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N6 |
| * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N8 |
| * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N5 |
| * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N6 |
| * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N8 |
| * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N5 |
| * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N6 |
| * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N8 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_ConfigETR(TIM_TypeDef *TIMx, uint32_t ETRPolarity, uint32_t ETRPrescaler, |
| uint32_t ETRFilter) |
| { |
| MODIFY_REG(TIMx->SMCR, TIM_SMCR_ETP | TIM_SMCR_ETPS | TIM_SMCR_ETF, ETRPolarity | ETRPrescaler | ETRFilter); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EF_Break_Function Break function configuration |
| * @{ |
| */ |
| /** |
| * @brief Enable the break function. |
| * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance provides a break input. |
| * @rmtoll BDTR BKE LL_TIM_EnableBRK |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_EnableBRK(TIM_TypeDef *TIMx) |
| { |
| __IO uint32_t tmpreg; |
| SET_BIT(TIMx->BDTR, TIM_BDTR_BKE); |
| /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */ |
| tmpreg = READ_REG(TIMx->BDTR); |
| (void)(tmpreg); |
| } |
| |
| /** |
| * @brief Disable the break function. |
| * @rmtoll BDTR BKE LL_TIM_DisableBRK |
| * @param TIMx Timer instance |
| * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance provides a break input. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_DisableBRK(TIM_TypeDef *TIMx) |
| { |
| __IO uint32_t tmpreg; |
| CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BKE); |
| /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */ |
| tmpreg = READ_REG(TIMx->BDTR); |
| (void)(tmpreg); |
| } |
| |
| /** |
| * @brief Configure the break input. |
| * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance provides a break input. |
| * @rmtoll BDTR BKP LL_TIM_ConfigBRK |
| * @param TIMx Timer instance |
| * @param BreakPolarity This parameter can be one of the following values: |
| * @arg @ref LL_TIM_BREAK_POLARITY_LOW |
| * @arg @ref LL_TIM_BREAK_POLARITY_HIGH |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_ConfigBRK(TIM_TypeDef *TIMx, uint32_t BreakPolarity) |
| { |
| __IO uint32_t tmpreg; |
| MODIFY_REG(TIMx->BDTR, TIM_BDTR_BKP, BreakPolarity); |
| /* Note: Any write operation to BKP bit takes a delay of 1 APB clock cycle to become effective. */ |
| tmpreg = READ_REG(TIMx->BDTR); |
| (void)(tmpreg); |
| } |
| |
| /** |
| * @brief Select the outputs off state (enabled v.s. disabled) in Idle and Run modes. |
| * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance provides a break input. |
| * @rmtoll BDTR OSSI LL_TIM_SetOffStates\n |
| * BDTR OSSR LL_TIM_SetOffStates |
| * @param TIMx Timer instance |
| * @param OffStateIdle This parameter can be one of the following values: |
| * @arg @ref LL_TIM_OSSI_DISABLE |
| * @arg @ref LL_TIM_OSSI_ENABLE |
| * @param OffStateRun This parameter can be one of the following values: |
| * @arg @ref LL_TIM_OSSR_DISABLE |
| * @arg @ref LL_TIM_OSSR_ENABLE |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_SetOffStates(TIM_TypeDef *TIMx, uint32_t OffStateIdle, uint32_t OffStateRun) |
| { |
| MODIFY_REG(TIMx->BDTR, TIM_BDTR_OSSI | TIM_BDTR_OSSR, OffStateIdle | OffStateRun); |
| } |
| |
| /** |
| * @brief Enable automatic output (MOE can be set by software or automatically when a break input is active). |
| * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance provides a break input. |
| * @rmtoll BDTR AOE LL_TIM_EnableAutomaticOutput |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_EnableAutomaticOutput(TIM_TypeDef *TIMx) |
| { |
| SET_BIT(TIMx->BDTR, TIM_BDTR_AOE); |
| } |
| |
| /** |
| * @brief Disable automatic output (MOE can be set only by software). |
| * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance provides a break input. |
| * @rmtoll BDTR AOE LL_TIM_DisableAutomaticOutput |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_DisableAutomaticOutput(TIM_TypeDef *TIMx) |
| { |
| CLEAR_BIT(TIMx->BDTR, TIM_BDTR_AOE); |
| } |
| |
| /** |
| * @brief Indicate whether automatic output is enabled. |
| * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance provides a break input. |
| * @rmtoll BDTR AOE LL_TIM_IsEnabledAutomaticOutput |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsEnabledAutomaticOutput(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->BDTR, TIM_BDTR_AOE) == (TIM_BDTR_AOE)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Enable the outputs (set the MOE bit in TIMx_BDTR register). |
| * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by |
| * software and is reset in case of break or break2 event |
| * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance provides a break input. |
| * @rmtoll BDTR MOE LL_TIM_EnableAllOutputs |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_EnableAllOutputs(TIM_TypeDef *TIMx) |
| { |
| SET_BIT(TIMx->BDTR, TIM_BDTR_MOE); |
| } |
| |
| /** |
| * @brief Disable the outputs (reset the MOE bit in TIMx_BDTR register). |
| * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by |
| * software and is reset in case of break or break2 event. |
| * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance provides a break input. |
| * @rmtoll BDTR MOE LL_TIM_DisableAllOutputs |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_DisableAllOutputs(TIM_TypeDef *TIMx) |
| { |
| CLEAR_BIT(TIMx->BDTR, TIM_BDTR_MOE); |
| } |
| |
| /** |
| * @brief Indicates whether outputs are enabled. |
| * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not |
| * a timer instance provides a break input. |
| * @rmtoll BDTR MOE LL_TIM_IsEnabledAllOutputs |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsEnabledAllOutputs(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->BDTR, TIM_BDTR_MOE) == (TIM_BDTR_MOE)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EF_DMA_Burst_Mode DMA burst mode configuration |
| * @{ |
| */ |
| /** |
| * @brief Configures the timer DMA burst feature. |
| * @note Macro IS_TIM_DMABURST_INSTANCE(TIMx) can be used to check whether or |
| * not a timer instance supports the DMA burst mode. |
| * @rmtoll DCR DBL LL_TIM_ConfigDMABurst\n |
| * DCR DBA LL_TIM_ConfigDMABurst |
| * @param TIMx Timer instance |
| * @param DMABurstBaseAddress This parameter can be one of the following values: |
| * @arg @ref LL_TIM_DMABURST_BASEADDR_CR1 |
| * @arg @ref LL_TIM_DMABURST_BASEADDR_CR2 |
| * @arg @ref LL_TIM_DMABURST_BASEADDR_SMCR |
| * @arg @ref LL_TIM_DMABURST_BASEADDR_DIER |
| * @arg @ref LL_TIM_DMABURST_BASEADDR_SR |
| * @arg @ref LL_TIM_DMABURST_BASEADDR_EGR |
| * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR1 |
| * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR2 |
| * @arg @ref LL_TIM_DMABURST_BASEADDR_CCER |
| * @arg @ref LL_TIM_DMABURST_BASEADDR_CNT |
| * @arg @ref LL_TIM_DMABURST_BASEADDR_PSC |
| * @arg @ref LL_TIM_DMABURST_BASEADDR_ARR |
| * @arg @ref LL_TIM_DMABURST_BASEADDR_RCR |
| * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR1 |
| * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR2 |
| * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR3 |
| * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR4 |
| * @arg @ref LL_TIM_DMABURST_BASEADDR_BDTR |
| * @param DMABurstLength This parameter can be one of the following values: |
| * @arg @ref LL_TIM_DMABURST_LENGTH_1TRANSFER |
| * @arg @ref LL_TIM_DMABURST_LENGTH_2TRANSFERS |
| * @arg @ref LL_TIM_DMABURST_LENGTH_3TRANSFERS |
| * @arg @ref LL_TIM_DMABURST_LENGTH_4TRANSFERS |
| * @arg @ref LL_TIM_DMABURST_LENGTH_5TRANSFERS |
| * @arg @ref LL_TIM_DMABURST_LENGTH_6TRANSFERS |
| * @arg @ref LL_TIM_DMABURST_LENGTH_7TRANSFERS |
| * @arg @ref LL_TIM_DMABURST_LENGTH_8TRANSFERS |
| * @arg @ref LL_TIM_DMABURST_LENGTH_9TRANSFERS |
| * @arg @ref LL_TIM_DMABURST_LENGTH_10TRANSFERS |
| * @arg @ref LL_TIM_DMABURST_LENGTH_11TRANSFERS |
| * @arg @ref LL_TIM_DMABURST_LENGTH_12TRANSFERS |
| * @arg @ref LL_TIM_DMABURST_LENGTH_13TRANSFERS |
| * @arg @ref LL_TIM_DMABURST_LENGTH_14TRANSFERS |
| * @arg @ref LL_TIM_DMABURST_LENGTH_15TRANSFERS |
| * @arg @ref LL_TIM_DMABURST_LENGTH_16TRANSFERS |
| * @arg @ref LL_TIM_DMABURST_LENGTH_17TRANSFERS |
| * @arg @ref LL_TIM_DMABURST_LENGTH_18TRANSFERS |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstBaseAddress, uint32_t DMABurstLength) |
| { |
| MODIFY_REG(TIMx->DCR, (TIM_DCR_DBL | TIM_DCR_DBA), (DMABurstBaseAddress | DMABurstLength)); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EF_Timer_Inputs_Remapping Timer input remapping |
| * @{ |
| */ |
| /** |
| * @brief Remap TIM inputs (input channel, internal/external triggers). |
| * @note Macro IS_TIM_REMAP_INSTANCE(TIMx) can be used to check whether or not |
| * a some timer inputs can be remapped. |
| * @rmtoll TIM2_OR ITR1_RMP LL_TIM_SetRemap\n |
| * TIM5_OR TI4_RMP LL_TIM_SetRemap\n |
| * TIM11_OR TI1_RMP LL_TIM_SetRemap |
| * @param TIMx Timer instance |
| * @param Remap Remap param depends on the TIMx. Description available only |
| * in CHM version of the User Manual (not in .pdf). |
| * Otherwise see Reference Manual description of OR registers. |
| * |
| * Below description summarizes "Timer Instance" and "Remap" param combinations: |
| * |
| * TIM2: one of the following values |
| * |
| * ITR1_RMP can be one of the following values |
| * @arg @ref LL_TIM_TIM2_ITR1_RMP_TIM8_TRGO |
| * @arg @ref LL_TIM_TIM2_ITR1_RMP_ETH_PTP |
| * @arg @ref LL_TIM_TIM2_ITR1_RMP_OTG_FS_SOF |
| * @arg @ref LL_TIM_TIM2_ITR1_RMP_OTG_HS_SOF |
| * |
| * TIM5: one of the following values |
| * |
| * @arg @ref LL_TIM_TIM5_TI4_RMP_GPIO |
| * @arg @ref LL_TIM_TIM5_TI4_RMP_LSI |
| * @arg @ref LL_TIM_TIM5_TI4_RMP_LSE |
| * @arg @ref LL_TIM_TIM5_TI4_RMP_RTC |
| * |
| * TIM11: one of the following values |
| * |
| * @arg @ref LL_TIM_TIM11_TI1_RMP_GPIO |
| * @arg @ref LL_TIM_TIM11_TI1_RMP_GPIO1 |
| * @arg @ref LL_TIM_TIM11_TI1_RMP_HSE_RTC |
| * @arg @ref LL_TIM_TIM11_TI1_RMP_GPIO2 |
| * |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_SetRemap(TIM_TypeDef *TIMx, uint32_t Remap) |
| { |
| MODIFY_REG(TIMx->OR, (Remap >> TIMx_OR_RMP_SHIFT), (Remap & TIMx_OR_RMP_MASK)); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EF_FLAG_Management FLAG-Management |
| * @{ |
| */ |
| /** |
| * @brief Clear the update interrupt flag (UIF). |
| * @rmtoll SR UIF LL_TIM_ClearFlag_UPDATE |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_ClearFlag_UPDATE(TIM_TypeDef *TIMx) |
| { |
| WRITE_REG(TIMx->SR, ~(TIM_SR_UIF)); |
| } |
| |
| /** |
| * @brief Indicate whether update interrupt flag (UIF) is set (update interrupt is pending). |
| * @rmtoll SR UIF LL_TIM_IsActiveFlag_UPDATE |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_UPDATE(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->SR, TIM_SR_UIF) == (TIM_SR_UIF)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Clear the Capture/Compare 1 interrupt flag (CC1F). |
| * @rmtoll SR CC1IF LL_TIM_ClearFlag_CC1 |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_ClearFlag_CC1(TIM_TypeDef *TIMx) |
| { |
| WRITE_REG(TIMx->SR, ~(TIM_SR_CC1IF)); |
| } |
| |
| /** |
| * @brief Indicate whether Capture/Compare 1 interrupt flag (CC1F) is set (Capture/Compare 1 interrupt is pending). |
| * @rmtoll SR CC1IF LL_TIM_IsActiveFlag_CC1 |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->SR, TIM_SR_CC1IF) == (TIM_SR_CC1IF)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Clear the Capture/Compare 2 interrupt flag (CC2F). |
| * @rmtoll SR CC2IF LL_TIM_ClearFlag_CC2 |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_ClearFlag_CC2(TIM_TypeDef *TIMx) |
| { |
| WRITE_REG(TIMx->SR, ~(TIM_SR_CC2IF)); |
| } |
| |
| /** |
| * @brief Indicate whether Capture/Compare 2 interrupt flag (CC2F) is set (Capture/Compare 2 interrupt is pending). |
| * @rmtoll SR CC2IF LL_TIM_IsActiveFlag_CC2 |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->SR, TIM_SR_CC2IF) == (TIM_SR_CC2IF)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Clear the Capture/Compare 3 interrupt flag (CC3F). |
| * @rmtoll SR CC3IF LL_TIM_ClearFlag_CC3 |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_ClearFlag_CC3(TIM_TypeDef *TIMx) |
| { |
| WRITE_REG(TIMx->SR, ~(TIM_SR_CC3IF)); |
| } |
| |
| /** |
| * @brief Indicate whether Capture/Compare 3 interrupt flag (CC3F) is set (Capture/Compare 3 interrupt is pending). |
| * @rmtoll SR CC3IF LL_TIM_IsActiveFlag_CC3 |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->SR, TIM_SR_CC3IF) == (TIM_SR_CC3IF)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Clear the Capture/Compare 4 interrupt flag (CC4F). |
| * @rmtoll SR CC4IF LL_TIM_ClearFlag_CC4 |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_ClearFlag_CC4(TIM_TypeDef *TIMx) |
| { |
| WRITE_REG(TIMx->SR, ~(TIM_SR_CC4IF)); |
| } |
| |
| /** |
| * @brief Indicate whether Capture/Compare 4 interrupt flag (CC4F) is set (Capture/Compare 4 interrupt is pending). |
| * @rmtoll SR CC4IF LL_TIM_IsActiveFlag_CC4 |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->SR, TIM_SR_CC4IF) == (TIM_SR_CC4IF)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Clear the commutation interrupt flag (COMIF). |
| * @rmtoll SR COMIF LL_TIM_ClearFlag_COM |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_ClearFlag_COM(TIM_TypeDef *TIMx) |
| { |
| WRITE_REG(TIMx->SR, ~(TIM_SR_COMIF)); |
| } |
| |
| /** |
| * @brief Indicate whether commutation interrupt flag (COMIF) is set (commutation interrupt is pending). |
| * @rmtoll SR COMIF LL_TIM_IsActiveFlag_COM |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_COM(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->SR, TIM_SR_COMIF) == (TIM_SR_COMIF)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Clear the trigger interrupt flag (TIF). |
| * @rmtoll SR TIF LL_TIM_ClearFlag_TRIG |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_ClearFlag_TRIG(TIM_TypeDef *TIMx) |
| { |
| WRITE_REG(TIMx->SR, ~(TIM_SR_TIF)); |
| } |
| |
| /** |
| * @brief Indicate whether trigger interrupt flag (TIF) is set (trigger interrupt is pending). |
| * @rmtoll SR TIF LL_TIM_IsActiveFlag_TRIG |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_TRIG(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->SR, TIM_SR_TIF) == (TIM_SR_TIF)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Clear the break interrupt flag (BIF). |
| * @rmtoll SR BIF LL_TIM_ClearFlag_BRK |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_ClearFlag_BRK(TIM_TypeDef *TIMx) |
| { |
| WRITE_REG(TIMx->SR, ~(TIM_SR_BIF)); |
| } |
| |
| /** |
| * @brief Indicate whether break interrupt flag (BIF) is set (break interrupt is pending). |
| * @rmtoll SR BIF LL_TIM_IsActiveFlag_BRK |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->SR, TIM_SR_BIF) == (TIM_SR_BIF)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Clear the Capture/Compare 1 over-capture interrupt flag (CC1OF). |
| * @rmtoll SR CC1OF LL_TIM_ClearFlag_CC1OVR |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_ClearFlag_CC1OVR(TIM_TypeDef *TIMx) |
| { |
| WRITE_REG(TIMx->SR, ~(TIM_SR_CC1OF)); |
| } |
| |
| /** |
| * @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set (Capture/Compare 1 interrupt is pending). |
| * @rmtoll SR CC1OF LL_TIM_IsActiveFlag_CC1OVR |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1OVR(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->SR, TIM_SR_CC1OF) == (TIM_SR_CC1OF)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Clear the Capture/Compare 2 over-capture interrupt flag (CC2OF). |
| * @rmtoll SR CC2OF LL_TIM_ClearFlag_CC2OVR |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_ClearFlag_CC2OVR(TIM_TypeDef *TIMx) |
| { |
| WRITE_REG(TIMx->SR, ~(TIM_SR_CC2OF)); |
| } |
| |
| /** |
| * @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set (Capture/Compare 2 over-capture interrupt is pending). |
| * @rmtoll SR CC2OF LL_TIM_IsActiveFlag_CC2OVR |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2OVR(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->SR, TIM_SR_CC2OF) == (TIM_SR_CC2OF)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Clear the Capture/Compare 3 over-capture interrupt flag (CC3OF). |
| * @rmtoll SR CC3OF LL_TIM_ClearFlag_CC3OVR |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_ClearFlag_CC3OVR(TIM_TypeDef *TIMx) |
| { |
| WRITE_REG(TIMx->SR, ~(TIM_SR_CC3OF)); |
| } |
| |
| /** |
| * @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set (Capture/Compare 3 over-capture interrupt is pending). |
| * @rmtoll SR CC3OF LL_TIM_IsActiveFlag_CC3OVR |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3OVR(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->SR, TIM_SR_CC3OF) == (TIM_SR_CC3OF)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Clear the Capture/Compare 4 over-capture interrupt flag (CC4OF). |
| * @rmtoll SR CC4OF LL_TIM_ClearFlag_CC4OVR |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_ClearFlag_CC4OVR(TIM_TypeDef *TIMx) |
| { |
| WRITE_REG(TIMx->SR, ~(TIM_SR_CC4OF)); |
| } |
| |
| /** |
| * @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set (Capture/Compare 4 over-capture interrupt is pending). |
| * @rmtoll SR CC4OF LL_TIM_IsActiveFlag_CC4OVR |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4OVR(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->SR, TIM_SR_CC4OF) == (TIM_SR_CC4OF)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup TIM_LL_EF_IT_Management IT-Management |
| * @{ |
| */ |
| /** |
| * @brief Enable update interrupt (UIE). |
| * @rmtoll DIER UIE LL_TIM_EnableIT_UPDATE |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_EnableIT_UPDATE(TIM_TypeDef *TIMx) |
| { |
| SET_BIT(TIMx->DIER, TIM_DIER_UIE); |
| } |
| |
| /** |
| * @brief Disable update interrupt (UIE). |
| * @rmtoll DIER UIE LL_TIM_DisableIT_UPDATE |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_DisableIT_UPDATE(TIM_TypeDef *TIMx) |
| { |
| CLEAR_BIT(TIMx->DIER, TIM_DIER_UIE); |
| } |
| |
| /** |
| * @brief Indicates whether the update interrupt (UIE) is enabled. |
| * @rmtoll DIER UIE LL_TIM_IsEnabledIT_UPDATE |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_UPDATE(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->DIER, TIM_DIER_UIE) == (TIM_DIER_UIE)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Enable capture/compare 1 interrupt (CC1IE). |
| * @rmtoll DIER CC1IE LL_TIM_EnableIT_CC1 |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_EnableIT_CC1(TIM_TypeDef *TIMx) |
| { |
| SET_BIT(TIMx->DIER, TIM_DIER_CC1IE); |
| } |
| |
| /** |
| * @brief Disable capture/compare 1 interrupt (CC1IE). |
| * @rmtoll DIER CC1IE LL_TIM_DisableIT_CC1 |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_DisableIT_CC1(TIM_TypeDef *TIMx) |
| { |
| CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1IE); |
| } |
| |
| /** |
| * @brief Indicates whether the capture/compare 1 interrupt (CC1IE) is enabled. |
| * @rmtoll DIER CC1IE LL_TIM_IsEnabledIT_CC1 |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC1(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1IE) == (TIM_DIER_CC1IE)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Enable capture/compare 2 interrupt (CC2IE). |
| * @rmtoll DIER CC2IE LL_TIM_EnableIT_CC2 |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_EnableIT_CC2(TIM_TypeDef *TIMx) |
| { |
| SET_BIT(TIMx->DIER, TIM_DIER_CC2IE); |
| } |
| |
| /** |
| * @brief Disable capture/compare 2 interrupt (CC2IE). |
| * @rmtoll DIER CC2IE LL_TIM_DisableIT_CC2 |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_DisableIT_CC2(TIM_TypeDef *TIMx) |
| { |
| CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2IE); |
| } |
| |
| /** |
| * @brief Indicates whether the capture/compare 2 interrupt (CC2IE) is enabled. |
| * @rmtoll DIER CC2IE LL_TIM_IsEnabledIT_CC2 |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC2(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2IE) == (TIM_DIER_CC2IE)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Enable capture/compare 3 interrupt (CC3IE). |
| * @rmtoll DIER CC3IE LL_TIM_EnableIT_CC3 |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_EnableIT_CC3(TIM_TypeDef *TIMx) |
| { |
| SET_BIT(TIMx->DIER, TIM_DIER_CC3IE); |
| } |
| |
| /** |
| * @brief Disable capture/compare 3 interrupt (CC3IE). |
| * @rmtoll DIER CC3IE LL_TIM_DisableIT_CC3 |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_DisableIT_CC3(TIM_TypeDef *TIMx) |
| { |
| CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3IE); |
| } |
| |
| /** |
| * @brief Indicates whether the capture/compare 3 interrupt (CC3IE) is enabled. |
| * @rmtoll DIER CC3IE LL_TIM_IsEnabledIT_CC3 |
| * @param TIMx Timer instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC3(TIM_TypeDef *TIMx) |
| { |
| return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3IE) == (TIM_DIER_CC3IE)) ? 1UL : 0UL); |
| } |
| |
| /** |
| * @brief Enable capture/compare 4 interrupt (CC4IE). |
| * @rmtoll DIER CC4IE LL_TIM_EnableIT_CC4 |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_TIM_EnableIT_CC4(TIM_TypeDef *TIMx) |
| { |
| SET_BIT(TIMx->DIER, TIM_DIER_CC4IE); |
| } |
| |
| /** |
| * @brief Disable capture/compare 4 interrupt (CC4IE). |
| * @rmtoll DIER CC4IE LL_TIM_DisableIT_CC4 |
| * @param TIMx Timer instance |
| * @retval None |
| */ |
|