blob: 6e1fb5d6a5413d77a6860afdcf7749ae3c09cde2 [file] [log] [blame]
/**
******************************************************************************
* @file stm32f3xx_ll_dma.c
* @author MCD Application Team
* @brief DMA LL module driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
#if defined(USE_FULL_LL_DRIVER)
/* Includes ------------------------------------------------------------------*/
#include "stm32f3xx_ll_dma.h"
#include "stm32f3xx_ll_bus.h"
#ifdef USE_FULL_ASSERT
#include "stm32_assert.h"
#else
#define assert_param(expr) ((void)0U)
#endif
/** @addtogroup STM32F3xx_LL_Driver
* @{
*/
#if defined (DMA1) || defined (DMA2)
/** @defgroup DMA_LL DMA
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/
/** @addtogroup DMA_LL_Private_Macros
* @{
*/
#define IS_LL_DMA_DIRECTION(__VALUE__) (((__VALUE__) == LL_DMA_DIRECTION_PERIPH_TO_MEMORY) || \
((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) || \
((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_MEMORY))
#define IS_LL_DMA_MODE(__VALUE__) (((__VALUE__) == LL_DMA_MODE_NORMAL) || \
((__VALUE__) == LL_DMA_MODE_CIRCULAR))
#define IS_LL_DMA_PERIPHINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_PERIPH_INCREMENT) || \
((__VALUE__) == LL_DMA_PERIPH_NOINCREMENT))
#define IS_LL_DMA_MEMORYINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_MEMORY_INCREMENT) || \
((__VALUE__) == LL_DMA_MEMORY_NOINCREMENT))
#define IS_LL_DMA_PERIPHDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_PDATAALIGN_BYTE) || \
((__VALUE__) == LL_DMA_PDATAALIGN_HALFWORD) || \
((__VALUE__) == LL_DMA_PDATAALIGN_WORD))
#define IS_LL_DMA_MEMORYDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_MDATAALIGN_BYTE) || \
((__VALUE__) == LL_DMA_MDATAALIGN_HALFWORD) || \
((__VALUE__) == LL_DMA_MDATAALIGN_WORD))
#define IS_LL_DMA_NBDATA(__VALUE__) ((__VALUE__) <= 0x0000FFFFU)
#define IS_LL_DMA_PRIORITY(__VALUE__) (((__VALUE__) == LL_DMA_PRIORITY_LOW) || \
((__VALUE__) == LL_DMA_PRIORITY_MEDIUM) || \
((__VALUE__) == LL_DMA_PRIORITY_HIGH) || \
((__VALUE__) == LL_DMA_PRIORITY_VERYHIGH))
#if defined (DMA2)
#if defined (DMA2_Channel6) && defined (DMA2_Channel7)
#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \
(((CHANNEL) == LL_DMA_CHANNEL_1) || \
((CHANNEL) == LL_DMA_CHANNEL_2) || \
((CHANNEL) == LL_DMA_CHANNEL_3) || \
((CHANNEL) == LL_DMA_CHANNEL_4) || \
((CHANNEL) == LL_DMA_CHANNEL_5) || \
((CHANNEL) == LL_DMA_CHANNEL_6) || \
((CHANNEL) == LL_DMA_CHANNEL_7))) || \
(((INSTANCE) == DMA2) && \
(((CHANNEL) == LL_DMA_CHANNEL_1) || \
((CHANNEL) == LL_DMA_CHANNEL_2) || \
((CHANNEL) == LL_DMA_CHANNEL_3) || \
((CHANNEL) == LL_DMA_CHANNEL_4) || \
((CHANNEL) == LL_DMA_CHANNEL_5) || \
((CHANNEL) == LL_DMA_CHANNEL_6) || \
((CHANNEL) == LL_DMA_CHANNEL_7))))
#else
#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \
(((CHANNEL) == LL_DMA_CHANNEL_1) || \
((CHANNEL) == LL_DMA_CHANNEL_2) || \
((CHANNEL) == LL_DMA_CHANNEL_3) || \
((CHANNEL) == LL_DMA_CHANNEL_4) || \
((CHANNEL) == LL_DMA_CHANNEL_5) || \
((CHANNEL) == LL_DMA_CHANNEL_6) || \
((CHANNEL) == LL_DMA_CHANNEL_7))) || \
(((INSTANCE) == DMA2) && \
(((CHANNEL) == LL_DMA_CHANNEL_1) || \
((CHANNEL) == LL_DMA_CHANNEL_2) || \
((CHANNEL) == LL_DMA_CHANNEL_3) || \
((CHANNEL) == LL_DMA_CHANNEL_4) || \
((CHANNEL) == LL_DMA_CHANNEL_5))))
#endif
#else
#define IS_LL_DMA_ALL_CHANNEL_INSTANCE(INSTANCE, CHANNEL) ((((INSTANCE) == DMA1) && \
(((CHANNEL) == LL_DMA_CHANNEL_1)|| \
((CHANNEL) == LL_DMA_CHANNEL_2) || \
((CHANNEL) == LL_DMA_CHANNEL_3) || \
((CHANNEL) == LL_DMA_CHANNEL_4) || \
((CHANNEL) == LL_DMA_CHANNEL_5) || \
((CHANNEL) == LL_DMA_CHANNEL_6) || \
((CHANNEL) == LL_DMA_CHANNEL_7))))
#endif
/**
* @}
*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup DMA_LL_Exported_Functions
* @{
*/
/** @addtogroup DMA_LL_EF_Init
* @{
*/
/**
* @brief De-initialize the DMA registers to their default reset values.
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7
* @retval An ErrorStatus enumeration value:
* - SUCCESS: DMA registers are de-initialized
* - ERROR: DMA registers are not de-initialized
*/
uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Channel)
{
DMA_Channel_TypeDef *tmp = (DMA_Channel_TypeDef *)DMA1_Channel1;
ErrorStatus status = SUCCESS;
/* Check the DMA Instance DMAx and Channel parameters*/
assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel));
tmp = (DMA_Channel_TypeDef *)(__LL_DMA_GET_CHANNEL_INSTANCE(DMAx, Channel));
/* Disable the selected DMAx_Channely */
CLEAR_BIT(tmp->CCR, DMA_CCR_EN);
/* Reset DMAx_Channely control register */
LL_DMA_WriteReg(tmp, CCR, 0U);
/* Reset DMAx_Channely remaining bytes register */
LL_DMA_WriteReg(tmp, CNDTR, 0U);
/* Reset DMAx_Channely peripheral address register */
LL_DMA_WriteReg(tmp, CPAR, 0U);
/* Reset DMAx_Channely memory address register */
LL_DMA_WriteReg(tmp, CMAR, 0U);
if (Channel == LL_DMA_CHANNEL_1)
{
/* Reset interrupt pending bits for DMAx Channel1 */
LL_DMA_ClearFlag_GI1(DMAx);
}
else if (Channel == LL_DMA_CHANNEL_2)
{
/* Reset interrupt pending bits for DMAx Channel2 */
LL_DMA_ClearFlag_GI2(DMAx);
}
else if (Channel == LL_DMA_CHANNEL_3)
{
/* Reset interrupt pending bits for DMAx Channel3 */
LL_DMA_ClearFlag_GI3(DMAx);
}
else if (Channel == LL_DMA_CHANNEL_4)
{
/* Reset interrupt pending bits for DMAx Channel4 */
LL_DMA_ClearFlag_GI4(DMAx);
}
else if (Channel == LL_DMA_CHANNEL_5)
{
/* Reset interrupt pending bits for DMAx Channel5 */
LL_DMA_ClearFlag_GI5(DMAx);
}
else if (Channel == LL_DMA_CHANNEL_6)
{
/* Reset interrupt pending bits for DMAx Channel6 */
LL_DMA_ClearFlag_GI6(DMAx);
}
else if (Channel == LL_DMA_CHANNEL_7)
{
/* Reset interrupt pending bits for DMAx Channel7 */
LL_DMA_ClearFlag_GI7(DMAx);
}
else
{
status = ERROR;
}
return status;
}
/**
* @brief Initialize the DMA registers according to the specified parameters in DMA_InitStruct.
* @note To convert DMAx_Channely Instance to DMAx Instance and Channely, use helper macros :
* @arg @ref __LL_DMA_GET_INSTANCE
* @arg @ref __LL_DMA_GET_CHANNEL
* @param DMAx DMAx Instance
* @param Channel This parameter can be one of the following values:
* @arg @ref LL_DMA_CHANNEL_1
* @arg @ref LL_DMA_CHANNEL_2
* @arg @ref LL_DMA_CHANNEL_3
* @arg @ref LL_DMA_CHANNEL_4
* @arg @ref LL_DMA_CHANNEL_5
* @arg @ref LL_DMA_CHANNEL_6
* @arg @ref LL_DMA_CHANNEL_7
* @param DMA_InitStruct pointer to a @ref LL_DMA_InitTypeDef structure.
* @retval An ErrorStatus enumeration value:
* - SUCCESS: DMA registers are initialized
* - ERROR: Not applicable
*/
uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Channel, LL_DMA_InitTypeDef *DMA_InitStruct)
{
/* Check the DMA Instance DMAx and Channel parameters*/
assert_param(IS_LL_DMA_ALL_CHANNEL_INSTANCE(DMAx, Channel));
/* Check the DMA parameters from DMA_InitStruct */
assert_param(IS_LL_DMA_DIRECTION(DMA_InitStruct->Direction));
assert_param(IS_LL_DMA_MODE(DMA_InitStruct->Mode));
assert_param(IS_LL_DMA_PERIPHINCMODE(DMA_InitStruct->PeriphOrM2MSrcIncMode));
assert_param(IS_LL_DMA_MEMORYINCMODE(DMA_InitStruct->MemoryOrM2MDstIncMode));
assert_param(IS_LL_DMA_PERIPHDATASIZE(DMA_InitStruct->PeriphOrM2MSrcDataSize));
assert_param(IS_LL_DMA_MEMORYDATASIZE(DMA_InitStruct->MemoryOrM2MDstDataSize));
assert_param(IS_LL_DMA_NBDATA(DMA_InitStruct->NbData));
assert_param(IS_LL_DMA_PRIORITY(DMA_InitStruct->Priority));
/*---------------------------- DMAx CCR Configuration ------------------------
* Configure DMAx_Channely: data transfer direction, data transfer mode,
* peripheral and memory increment mode,
* data size alignment and priority level with parameters :
* - Direction: DMA_CCR_DIR and DMA_CCR_MEM2MEM bits
* - Mode: DMA_CCR_CIRC bit
* - PeriphOrM2MSrcIncMode: DMA_CCR_PINC bit
* - MemoryOrM2MDstIncMode: DMA_CCR_MINC bit
* - PeriphOrM2MSrcDataSize: DMA_CCR_PSIZE[1:0] bits
* - MemoryOrM2MDstDataSize: DMA_CCR_MSIZE[1:0] bits
* - Priority: DMA_CCR_PL[1:0] bits
*/
LL_DMA_ConfigTransfer(DMAx, Channel, DMA_InitStruct->Direction | \
DMA_InitStruct->Mode | \
DMA_InitStruct->PeriphOrM2MSrcIncMode | \
DMA_InitStruct->MemoryOrM2MDstIncMode | \
DMA_InitStruct->PeriphOrM2MSrcDataSize | \
DMA_InitStruct->MemoryOrM2MDstDataSize | \
DMA_InitStruct->Priority);
/*-------------------------- DMAx CMAR Configuration -------------------------
* Configure the memory or destination base address with parameter :
* - MemoryOrM2MDstAddress: DMA_CMAR_MA[31:0] bits
*/
LL_DMA_SetMemoryAddress(DMAx, Channel, DMA_InitStruct->MemoryOrM2MDstAddress);
/*-------------------------- DMAx CPAR Configuration -------------------------
* Configure the peripheral or source base address with parameter :
* - PeriphOrM2MSrcAddress: DMA_CPAR_PA[31:0] bits
*/
LL_DMA_SetPeriphAddress(DMAx, Channel, DMA_InitStruct->PeriphOrM2MSrcAddress);
/*--------------------------- DMAx CNDTR Configuration -----------------------
* Configure the peripheral base address with parameter :
* - NbData: DMA_CNDTR_NDT[15:0] bits
*/
LL_DMA_SetDataLength(DMAx, Channel, DMA_InitStruct->NbData);
return SUCCESS;
}
/**
* @brief Set each @ref LL_DMA_InitTypeDef field to default value.
* @param DMA_InitStruct Pointer to a @ref LL_DMA_InitTypeDef structure.
* @retval None
*/
void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct)
{
/* Set DMA_InitStruct fields to default values */
DMA_InitStruct->PeriphOrM2MSrcAddress = 0x00000000U;
DMA_InitStruct->MemoryOrM2MDstAddress = 0x00000000U;
DMA_InitStruct->Direction = LL_DMA_DIRECTION_PERIPH_TO_MEMORY;
DMA_InitStruct->Mode = LL_DMA_MODE_NORMAL;
DMA_InitStruct->PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT;
DMA_InitStruct->MemoryOrM2MDstIncMode = LL_DMA_MEMORY_NOINCREMENT;
DMA_InitStruct->PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_BYTE;
DMA_InitStruct->MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_BYTE;
DMA_InitStruct->NbData = 0x00000000U;
DMA_InitStruct->Priority = LL_DMA_PRIORITY_LOW;
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* DMA1 || DMA2 */
/**
* @}
*/
#endif /* USE_FULL_LL_DRIVER */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/