blob: 93a7ddbc186e8833f67dbcc25b5844d1abb3c55b [file] [log] [blame]
/**
******************************************************************************
* @file stm32f3xx_ll_fmc.c
* @author MCD Application Team
* @brief FMC Low Layer HAL module driver.
*
* This file provides firmware functions to manage the following
* functionalities of the Flexible Memory Controller (FMC) peripheral memories:
* + Initialization/de-initialization functions
* + Peripheral Control functions
* + Peripheral State functions
*
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
@verbatim
==============================================================================
##### FMC peripheral features #####
==============================================================================
[..] The Flexible memory controller (FMC) includes following memory controllers:
(+) The NOR/PSRAM memory controller
(+) The NAND/PC Card memory controller
[..] The FMC functional block makes the interface with synchronous and asynchronous static
memories and 16-bit PC memory cards. Its main purposes are:
(+) to translate AHB transactions into the appropriate external device protocol
(+) to meet the access time requirements of the external memory devices
[..] All external memories share the addresses, data and control signals with the controller.
Each external device is accessed by means of a unique Chip Select. The FMC performs
only one access at a time to an external device.
The main features of the FMC controller are the following:
(+) Interface with static-memory mapped devices including:
(++) Static random access memory (SRAM)
(++) Read-only memory (ROM)
(++) NOR Flash memory/OneNAND Flash memory
(++) PSRAM (4 memory banks)
(++) 16-bit PC Card compatible devices
(++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of
data
(+) Independent Chip Select control for each memory bank
(+) Independent configuration for each memory bank
@endverbatim
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f3xx_hal.h"
/** @addtogroup STM32F3xx_HAL_Driver
* @{
*/
#if defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_PCCARD_MODULE_ENABLED) \
|| defined(HAL_SRAM_MODULE_ENABLED)
/** @defgroup FMC_LL FMC Low Layer
* @brief FMC driver modules
* @{
*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/** @defgroup FMC_LL_Private_Constants FMC Low Layer Private Constants
* @{
*/
/* ----------------------- FMC registers bit mask --------------------------- */
#if defined(FMC_BANK1)
/* --- BCR Register ---*/
/* BCR register clear mask */
/* --- BTR Register ---*/
/* BTR register clear mask */
#define BTR_CLEAR_MASK ((uint32_t)(FMC_BTRx_ADDSET | FMC_BTRx_ADDHLD |\
FMC_BTRx_DATAST | FMC_BTRx_BUSTURN |\
FMC_BTRx_CLKDIV | FMC_BTRx_DATLAT |\
FMC_BTRx_ACCMOD))
/* --- BWTR Register ---*/
/* BWTR register clear mask */
#define BWTR_CLEAR_MASK ((uint32_t)(FMC_BWTRx_ADDSET | FMC_BWTRx_ADDHLD |\
FMC_BWTRx_DATAST | FMC_BWTRx_ACCMOD))
#endif /* FMC_BANK1 */
#if defined(FMC_BANK3)
/* --- PCR Register ---*/
/* PCR register clear mask */
#define PCR_CLEAR_MASK ((uint32_t)(FMC_PCRx_PWAITEN | FMC_PCRx_PBKEN | \
FMC_PCRx_PTYP | FMC_PCRx_PWID | \
FMC_PCRx_ECCEN | FMC_PCRx_TCLR | \
FMC_PCRx_TAR | FMC_PCRx_ECCPS))
/* --- PMEM Register ---*/
/* PMEM register clear mask */
#define PMEM_CLEAR_MASK ((uint32_t)(FMC_PMEMx_MEMSETx | FMC_PMEMx_MEMWAITx |\
FMC_PMEMx_MEMHOLDx | FMC_PMEMx_MEMHIZx))
/* --- PATT Register ---*/
/* PATT register clear mask */
#define PATT_CLEAR_MASK ((uint32_t)(FMC_PATTx_ATTSETx | FMC_PATTx_ATTWAITx |\
FMC_PATTx_ATTHOLDx | FMC_PATTx_ATTHIZx))
#endif /* FMC_BANK3 */
#if defined(FMC_BANK4)
/* --- PCR Register ---*/
/* PCR register clear mask */
#define PCR4_CLEAR_MASK ((uint32_t)(FMC_PCR4_PWAITEN | FMC_PCR4_PBKEN | \
FMC_PCR4_PTYP | FMC_PCR4_PWID | \
FMC_PCR4_ECCEN | FMC_PCR4_TCLR | \
FMC_PCR4_TAR | FMC_PCR4_ECCPS))
/* --- PMEM Register ---*/
/* PMEM register clear mask */
#define PMEM4_CLEAR_MASK ((uint32_t)(FMC_PMEM4_MEMSET4 | FMC_PMEM4_MEMWAIT4 |\
FMC_PMEM4_MEMHOLD4 | FMC_PMEM4_MEMHIZ4))
/* --- PATT Register ---*/
/* PATT register clear mask */
#define PATT4_CLEAR_MASK ((uint32_t)(FMC_PATT4_ATTSET4 | FMC_PATT4_ATTWAIT4 |\
FMC_PATT4_ATTHOLD4 | FMC_PATT4_ATTHIZ4))
/* --- PIO4 Register ---*/
/* PIO4 register clear mask */
#define PIO4_CLEAR_MASK ((uint32_t)(FMC_PIO4_IOSET4 | FMC_PIO4_IOWAIT4 | \
FMC_PIO4_IOHOLD4 | FMC_PIO4_IOHIZ4))
#endif /* FMC_BANK4 */
/**
* @}
*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup FMC_LL_Exported_Functions FMC Low Layer Exported Functions
* @{
*/
#if defined(FMC_BANK1)
/** @defgroup FMC_LL_Exported_Functions_NORSRAM FMC Low Layer NOR SRAM Exported Functions
* @brief NORSRAM Controller functions
*
@verbatim
==============================================================================
##### How to use NORSRAM device driver #####
==============================================================================
[..]
This driver contains a set of APIs to interface with the FMC NORSRAM banks in order
to run the NORSRAM external devices.
(+) FMC NORSRAM bank reset using the function FMC_NORSRAM_DeInit()
(+) FMC NORSRAM bank control configuration using the function FMC_NORSRAM_Init()
(+) FMC NORSRAM bank timing configuration using the function FMC_NORSRAM_Timing_Init()
(+) FMC NORSRAM bank extended timing configuration using the function
FMC_NORSRAM_Extended_Timing_Init()
(+) FMC NORSRAM bank enable/disable write operation using the functions
FMC_NORSRAM_WriteOperation_Enable()/FMC_NORSRAM_WriteOperation_Disable()
@endverbatim
* @{
*/
/** @defgroup FMC_LL_NORSRAM_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and Configuration functions
*
@verbatim
==============================================================================
##### Initialization and de_initialization functions #####
==============================================================================
[..]
This section provides functions allowing to:
(+) Initialize and configure the FMC NORSRAM interface
(+) De-initialize the FMC NORSRAM interface
(+) Configure the FMC clock and associated GPIOs
@endverbatim
* @{
*/
/**
* @brief Initialize the FMC_NORSRAM device according to the specified
* control parameters in the FMC_NORSRAM_InitTypeDef
* @param Device Pointer to NORSRAM device instance
* @param Init Pointer to NORSRAM Initialization structure
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device,
FMC_NORSRAM_InitTypeDef *Init)
{
uint32_t flashaccess;
uint32_t btcr_reg;
uint32_t mask;
/* Check the parameters */
assert_param(IS_FMC_NORSRAM_DEVICE(Device));
assert_param(IS_FMC_NORSRAM_BANK(Init->NSBank));
assert_param(IS_FMC_MUX(Init->DataAddressMux));
assert_param(IS_FMC_MEMORY(Init->MemoryType));
assert_param(IS_FMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth));
assert_param(IS_FMC_BURSTMODE(Init->BurstAccessMode));
assert_param(IS_FMC_WAIT_POLARITY(Init->WaitSignalPolarity));
assert_param(IS_FMC_WRAP_MODE(Init->WrapMode));
assert_param(IS_FMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive));
assert_param(IS_FMC_WRITE_OPERATION(Init->WriteOperation));
assert_param(IS_FMC_WAITE_SIGNAL(Init->WaitSignal));
assert_param(IS_FMC_EXTENDED_MODE(Init->ExtendedMode));
assert_param(IS_FMC_ASYNWAIT(Init->AsynchronousWait));
assert_param(IS_FMC_WRITE_BURST(Init->WriteBurst));
assert_param(IS_FMC_CONTINOUS_CLOCK(Init->ContinuousClock));
/* Disable NORSRAM Device */
__FMC_NORSRAM_DISABLE(Device, Init->NSBank);
/* Set NORSRAM device control parameters */
if (Init->MemoryType == FMC_MEMORY_TYPE_NOR)
{
flashaccess = FMC_NORSRAM_FLASH_ACCESS_ENABLE;
}
else
{
flashaccess = FMC_NORSRAM_FLASH_ACCESS_DISABLE;
}
btcr_reg = (flashaccess | \
Init->DataAddressMux | \
Init->MemoryType | \
Init->MemoryDataWidth | \
Init->BurstAccessMode | \
Init->WaitSignalPolarity | \
Init->WaitSignalActive | \
Init->WriteOperation | \
Init->WaitSignal | \
Init->ExtendedMode | \
Init->AsynchronousWait | \
Init->WriteBurst);
btcr_reg |= Init->WrapMode;
btcr_reg |= Init->ContinuousClock;
mask = (FMC_BCRx_MBKEN |
FMC_BCRx_MUXEN |
FMC_BCRx_MTYP |
FMC_BCRx_MWID |
FMC_BCRx_FACCEN |
FMC_BCRx_BURSTEN |
FMC_BCRx_WAITPOL |
FMC_BCRx_WAITCFG |
FMC_BCRx_WREN |
FMC_BCRx_WAITEN |
FMC_BCRx_EXTMOD |
FMC_BCRx_ASYNCWAIT |
FMC_BCRx_CBURSTRW);
mask |= FMC_BCRx_WRAPMOD;
mask |= FMC_BCR1_CCLKEN;
MODIFY_REG(Device->BTCR[Init->NSBank], mask, btcr_reg);
/* Configure synchronous mode when Continuous clock is enabled for bank2..4 */
if ((Init->ContinuousClock == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC) && (Init->NSBank != FMC_NORSRAM_BANK1))
{
MODIFY_REG(Device->BTCR[FMC_NORSRAM_BANK1], FMC_BCR1_CCLKEN, Init->ContinuousClock);
}
return HAL_OK;
}
/**
* @brief DeInitialize the FMC_NORSRAM peripheral
* @param Device Pointer to NORSRAM device instance
* @param ExDevice Pointer to NORSRAM extended mode device instance
* @param Bank NORSRAM bank number
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device,
FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank)
{
/* Check the parameters */
assert_param(IS_FMC_NORSRAM_DEVICE(Device));
assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(ExDevice));
assert_param(IS_FMC_NORSRAM_BANK(Bank));
/* Disable the FMC_NORSRAM device */
__FMC_NORSRAM_DISABLE(Device, Bank);
/* De-initialize the FMC_NORSRAM device */
/* FMC_NORSRAM_BANK1 */
if (Bank == FMC_NORSRAM_BANK1)
{
Device->BTCR[Bank] = 0x000030DBU;
}
/* FMC_NORSRAM_BANK2, FMC_NORSRAM_BANK3 or FMC_NORSRAM_BANK4 */
else
{
Device->BTCR[Bank] = 0x000030D2U;
}
Device->BTCR[Bank + 1U] = 0x0FFFFFFFU;
ExDevice->BWTR[Bank] = 0x0FFFFFFFU;
return HAL_OK;
}
/**
* @brief Initialize the FMC_NORSRAM Timing according to the specified
* parameters in the FMC_NORSRAM_TimingTypeDef
* @param Device Pointer to NORSRAM device instance
* @param Timing Pointer to NORSRAM Timing structure
* @param Bank NORSRAM bank number
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device,
FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank)
{
uint32_t tmpr;
/* Check the parameters */
assert_param(IS_FMC_NORSRAM_DEVICE(Device));
assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime));
assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
assert_param(IS_FMC_CLK_DIV(Timing->CLKDivision));
assert_param(IS_FMC_DATA_LATENCY(Timing->DataLatency));
assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode));
assert_param(IS_FMC_NORSRAM_BANK(Bank));
/* Set FMC_NORSRAM device timing parameters */
Device->BTCR[Bank + 1U] =
(Timing->AddressSetupTime << FMC_BTRx_ADDSET_Pos) |
(Timing->AddressHoldTime << FMC_BTRx_ADDHLD_Pos) |
(Timing->DataSetupTime << FMC_BTRx_DATAST_Pos) |
(Timing->BusTurnAroundDuration << FMC_BTRx_BUSTURN_Pos) |
((Timing->CLKDivision - 1U) << FMC_BTRx_CLKDIV_Pos) |
((Timing->DataLatency - 2U) << FMC_BTRx_DATLAT_Pos) |
Timing->AccessMode;
/* Configure Clock division value (in NORSRAM bank 1) when continuous clock is enabled */
if (HAL_IS_BIT_SET(Device->BTCR[FMC_NORSRAM_BANK1], FMC_BCR1_CCLKEN))
{
tmpr = (uint32_t)(Device->BTCR[FMC_NORSRAM_BANK1 + 1U] & ~((0x0FU) << FMC_BTRx_CLKDIV_Pos));
tmpr |= (uint32_t)(((Timing->CLKDivision) - 1U) << FMC_BTRx_CLKDIV_Pos);
MODIFY_REG(Device->BTCR[FMC_NORSRAM_BANK1 + 1U], FMC_BTRx_CLKDIV, tmpr);
}
return HAL_OK;
}
/**
* @brief Initialize the FMC_NORSRAM Extended mode Timing according to the specified
* parameters in the FMC_NORSRAM_TimingTypeDef
* @param Device Pointer to NORSRAM device instance
* @param Timing Pointer to NORSRAM Timing structure
* @param Bank NORSRAM bank number
* @param ExtendedMode FMC Extended Mode
* This parameter can be one of the following values:
* @arg FMC_EXTENDED_MODE_DISABLE
* @arg FMC_EXTENDED_MODE_ENABLE
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device,
FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank,
uint32_t ExtendedMode)
{
/* Check the parameters */
assert_param(IS_FMC_EXTENDED_MODE(ExtendedMode));
/* Set NORSRAM device timing register for write configuration, if extended mode is used */
if (ExtendedMode == FMC_EXTENDED_MODE_ENABLE)
{
/* Check the parameters */
assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(Device));
assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime));
assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode));
assert_param(IS_FMC_NORSRAM_BANK(Bank));
/* Set NORSRAM device timing register for write configuration, if extended mode is used */
MODIFY_REG(Device->BWTR[Bank], BWTR_CLEAR_MASK, (Timing->AddressSetupTime |
((Timing->AddressHoldTime) << FMC_BWTRx_ADDHLD_Pos) |
((Timing->DataSetupTime) << FMC_BWTRx_DATAST_Pos) |
Timing->AccessMode));
}
else
{
Device->BWTR[Bank] = 0x0FFFFFFFU;
}
return HAL_OK;
}
/**
* @}
*/
/** @addtogroup FMC_LL_NORSRAM_Private_Functions_Group2
* @brief management functions
*
@verbatim
==============================================================================
##### FMC_NORSRAM Control functions #####
==============================================================================
[..]
This subsection provides a set of functions allowing to control dynamically
the FMC NORSRAM interface.
@endverbatim
* @{
*/
/**
* @brief Enables dynamically FMC_NORSRAM write operation.
* @param Device Pointer to NORSRAM device instance
* @param Bank NORSRAM bank number
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank)
{
/* Check the parameters */
assert_param(IS_FMC_NORSRAM_DEVICE(Device));
assert_param(IS_FMC_NORSRAM_BANK(Bank));
/* Enable write operation */
SET_BIT(Device->BTCR[Bank], FMC_WRITE_OPERATION_ENABLE);
return HAL_OK;
}
/**
* @brief Disables dynamically FMC_NORSRAM write operation.
* @param Device Pointer to NORSRAM device instance
* @param Bank NORSRAM bank number
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank)
{
/* Check the parameters */
assert_param(IS_FMC_NORSRAM_DEVICE(Device));
assert_param(IS_FMC_NORSRAM_BANK(Bank));
/* Disable write operation */
CLEAR_BIT(Device->BTCR[Bank], FMC_WRITE_OPERATION_ENABLE);
return HAL_OK;
}
/**
* @}
*/
/**
* @}
*/
#endif /* FMC_BANK1 */
#if defined(FMC_BANK3)
/** @defgroup FMC_LL_Exported_Functions_NAND FMC Low Layer NAND Exported Functions
* @brief NAND Controller functions
*
@verbatim
==============================================================================
##### How to use NAND device driver #####
==============================================================================
[..]
This driver contains a set of APIs to interface with the FMC NAND banks in order
to run the NAND external devices.
(+) FMC NAND bank reset using the function FMC_NAND_DeInit()
(+) FMC NAND bank control configuration using the function FMC_NAND_Init()
(+) FMC NAND bank common space timing configuration using the function
FMC_NAND_CommonSpace_Timing_Init()
(+) FMC NAND bank attribute space timing configuration using the function
FMC_NAND_AttributeSpace_Timing_Init()
(+) FMC NAND bank enable/disable ECC correction feature using the functions
FMC_NAND_ECC_Enable()/FMC_NAND_ECC_Disable()
(+) FMC NAND bank get ECC correction code using the function FMC_NAND_GetECC()
@endverbatim
* @{
*/
/** @defgroup FMC_LL_NAND_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and Configuration functions
*
@verbatim
==============================================================================
##### Initialization and de_initialization functions #####
==============================================================================
[..]
This section provides functions allowing to:
(+) Initialize and configure the FMC NAND interface
(+) De-initialize the FMC NAND interface
(+) Configure the FMC clock and associated GPIOs
@endverbatim
* @{
*/
/**
* @brief Initializes the FMC_NAND device according to the specified
* control parameters in the FMC_NAND_HandleTypeDef
* @param Device Pointer to NAND device instance
* @param Init Pointer to NAND Initialization structure
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init)
{
/* Check the parameters */
assert_param(IS_FMC_NAND_DEVICE(Device));
assert_param(IS_FMC_NAND_BANK(Init->NandBank));
assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature));
assert_param(IS_FMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
assert_param(IS_FMC_ECC_STATE(Init->EccComputation));
assert_param(IS_FMC_ECCPAGE_SIZE(Init->ECCPageSize));
assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime));
assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime));
/* Set NAND device control parameters */
if (Init->NandBank == FMC_NAND_BANK2)
{
/* NAND bank 2 registers configuration */
MODIFY_REG(Device->PCR2, PCR_CLEAR_MASK, (Init->Waitfeature |
FMC_PCR_MEMORY_TYPE_NAND |
Init->MemoryDataWidth |
Init->EccComputation |
Init->ECCPageSize |
((Init->TCLRSetupTime) << FMC_PCRx_TCLR_Pos) |
((Init->TARSetupTime) << FMC_PCRx_TAR_Pos)));
}
else
{
/* NAND bank 3 registers configuration */
MODIFY_REG(Device->PCR3, PCR_CLEAR_MASK, (Init->Waitfeature |
FMC_PCR_MEMORY_TYPE_NAND |
Init->MemoryDataWidth |
Init->EccComputation |
Init->ECCPageSize |
((Init->TCLRSetupTime) << FMC_PCRx_TCLR_Pos) |
((Init->TARSetupTime) << FMC_PCRx_TAR_Pos)));
}
return HAL_OK;
}
/**
* @brief Initializes the FMC_NAND Common space Timing according to the specified
* parameters in the FMC_NAND_PCC_TimingTypeDef
* @param Device Pointer to NAND device instance
* @param Timing Pointer to NAND timing structure
* @param Bank NAND bank number
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device,
FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
{
/* Check the parameters */
assert_param(IS_FMC_NAND_DEVICE(Device));
assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
assert_param(IS_FMC_NAND_BANK(Bank));
/* Set FMC_NAND device timing parameters */
if (Bank == FMC_NAND_BANK2)
{
/* NAND bank 2 registers configuration */
MODIFY_REG(Device->PMEM2, PMEM_CLEAR_MASK, (Timing->SetupTime |
((Timing->WaitSetupTime) << FMC_PMEMx_MEMWAITx_Pos) |
((Timing->HoldSetupTime) << FMC_PMEMx_MEMHOLDx_Pos) |
((Timing->HiZSetupTime) << FMC_PMEMx_MEMHIZx_Pos)));
}
else
{
/* NAND bank 3 registers configuration */
MODIFY_REG(Device->PMEM3, PMEM_CLEAR_MASK, (Timing->SetupTime |
((Timing->WaitSetupTime) << FMC_PMEMx_MEMWAITx_Pos) |
((Timing->HoldSetupTime) << FMC_PMEMx_MEMHOLDx_Pos) |
((Timing->HiZSetupTime) << FMC_PMEMx_MEMHIZx_Pos)));
}
return HAL_OK;
}
/**
* @brief Initializes the FMC_NAND Attribute space Timing according to the specified
* parameters in the FMC_NAND_PCC_TimingTypeDef
* @param Device Pointer to NAND device instance
* @param Timing Pointer to NAND timing structure
* @param Bank NAND bank number
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device,
FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
{
/* Check the parameters */
assert_param(IS_FMC_NAND_DEVICE(Device));
assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
assert_param(IS_FMC_NAND_BANK(Bank));
/* Set FMC_NAND device timing parameters */
if (Bank == FMC_NAND_BANK2)
{
/* NAND bank 2 registers configuration */
MODIFY_REG(Device->PATT2, PATT_CLEAR_MASK, (Timing->SetupTime |
((Timing->WaitSetupTime) << FMC_PATTx_ATTWAITx_Pos) |
((Timing->HoldSetupTime) << FMC_PATTx_ATTHOLDx_Pos) |
((Timing->HiZSetupTime) << FMC_PATTx_ATTHIZx_Pos)));
}
else
{
/* NAND bank 3 registers configuration */
MODIFY_REG(Device->PATT3, PATT_CLEAR_MASK, (Timing->SetupTime |
((Timing->WaitSetupTime) << FMC_PATTx_ATTWAITx_Pos) |
((Timing->HoldSetupTime) << FMC_PATTx_ATTHOLDx_Pos) |
((Timing->HiZSetupTime) << FMC_PATTx_ATTHIZx_Pos)));
}
return HAL_OK;
}
/**
* @brief DeInitializes the FMC_NAND device
* @param Device Pointer to NAND device instance
* @param Bank NAND bank number
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank)
{
/* Check the parameters */
assert_param(IS_FMC_NAND_DEVICE(Device));
assert_param(IS_FMC_NAND_BANK(Bank));
/* Disable the NAND Bank */
__FMC_NAND_DISABLE(Device, Bank);
/* De-initialize the NAND Bank */
if (Bank == FMC_NAND_BANK2)
{
/* Set the FMC_NAND_BANK2 registers to their reset values */
WRITE_REG(Device->PCR2, 0x00000018U);
WRITE_REG(Device->SR2, 0x00000040U);
WRITE_REG(Device->PMEM2, 0xFCFCFCFCU);
WRITE_REG(Device->PATT2, 0xFCFCFCFCU);
}
/* FMC_Bank3_NAND */
else
{
/* Set the FMC_NAND_BANK3 registers to their reset values */
WRITE_REG(Device->PCR3, 0x00000018U);
WRITE_REG(Device->SR3, 0x00000040U);
WRITE_REG(Device->PMEM3, 0xFCFCFCFCU);
WRITE_REG(Device->PATT3, 0xFCFCFCFCU);
}
return HAL_OK;
}
/**
* @}
*/
/** @defgroup HAL_FMC_NAND_Group2 Peripheral Control functions
* @brief management functions
*
@verbatim
==============================================================================
##### FMC_NAND Control functions #####
==============================================================================
[..]
This subsection provides a set of functions allowing to control dynamically
the FMC NAND interface.
@endverbatim
* @{
*/
/**
* @brief Enables dynamically FMC_NAND ECC feature.
* @param Device Pointer to NAND device instance
* @param Bank NAND bank number
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank)
{
/* Check the parameters */
assert_param(IS_FMC_NAND_DEVICE(Device));
assert_param(IS_FMC_NAND_BANK(Bank));
/* Enable ECC feature */
if (Bank == FMC_NAND_BANK2)
{
SET_BIT(Device->PCR2, FMC_PCRx_ECCEN);
}
else
{
SET_BIT(Device->PCR3, FMC_PCRx_ECCEN);
}
return HAL_OK;
}
/**
* @brief Disables dynamically FMC_NAND ECC feature.
* @param Device Pointer to NAND device instance
* @param Bank NAND bank number
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank)
{
/* Check the parameters */
assert_param(IS_FMC_NAND_DEVICE(Device));
assert_param(IS_FMC_NAND_BANK(Bank));
/* Disable ECC feature */
if (Bank == FMC_NAND_BANK2)
{
CLEAR_BIT(Device->PCR2, FMC_PCRx_ECCEN);
}
else
{
CLEAR_BIT(Device->PCR3, FMC_PCRx_ECCEN);
}
return HAL_OK;
}
/**
* @brief Disables dynamically FMC_NAND ECC feature.
* @param Device Pointer to NAND device instance
* @param ECCval Pointer to ECC value
* @param Bank NAND bank number
* @param Timeout Timeout wait value
* @retval HAL status
*/
HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank,
uint32_t Timeout)
{
uint32_t tickstart;
/* Check the parameters */
assert_param(IS_FMC_NAND_DEVICE(Device));
assert_param(IS_FMC_NAND_BANK(Bank));
/* Get tick */
tickstart = HAL_GetTick();
/* Wait until FIFO is empty */
while (__FMC_NAND_GET_FLAG(Device, Bank, FMC_FLAG_FEMPT) == RESET)
{
/* Check for the Timeout */
if (Timeout != HAL_MAX_DELAY)
{
if (((HAL_GetTick() - tickstart) > Timeout) || (Timeout == 0U))
{
return HAL_TIMEOUT;
}
}
}
if (Bank == FMC_NAND_BANK2)
{
/* Get the ECCR2 register value */
*ECCval = (uint32_t)Device->ECCR2;
}
else
{
/* Get the ECCR3 register value */
*ECCval = (uint32_t)Device->ECCR3;
}
return HAL_OK;
}
/**
* @}
*/
#endif /* FMC_BANK3 */
#if defined(FMC_BANK4)
/** @addtogroup FMC_LL_PCCARD
* @brief PCCARD Controller functions
*
@verbatim
==============================================================================
##### How to use PCCARD device driver #####
==============================================================================
[..]
This driver contains a set of APIs to interface with the FMC PCCARD bank in order
to run the PCCARD/compact flash external devices.
(+) FMC PCCARD bank reset using the function FMC_PCCARD_DeInit()
(+) FMC PCCARD bank control configuration using the function FMC_PCCARD_Init()
(+) FMC PCCARD bank common space timing configuration using the function
FMC_PCCARD_CommonSpace_Timing_Init()
(+) FMC PCCARD bank attribute space timing configuration using the function
FMC_PCCARD_AttributeSpace_Timing_Init()
(+) FMC PCCARD bank IO space timing configuration using the function
FMC_PCCARD_IOSpace_Timing_Init()
@endverbatim
* @{
*/
/** @addtogroup FMC_LL_PCCARD_Private_Functions_Group1
* @brief Initialization and Configuration functions
*
@verbatim
==============================================================================
##### Initialization and de_initialization functions #####
==============================================================================
[..]
This section provides functions allowing to:
(+) Initialize and configure the FMC PCCARD interface
(+) De-initialize the FMC PCCARD interface
(+) Configure the FMC clock and associated GPIOs
@endverbatim
* @{
*/
/**
* @brief Initializes the FMC_PCCARD device according to the specified
* control parameters in the FMC_PCCARD_HandleTypeDef
* @param Device Pointer to PCCARD device instance
* @param Init Pointer to PCCARD Initialization structure
* @retval HAL status
*/
HAL_StatusTypeDef FMC_PCCARD_Init(FMC_PCCARD_TypeDef *Device, FMC_PCCARD_InitTypeDef *Init)
{
/* Check the parameters */
assert_param(IS_FMC_PCCARD_DEVICE(Device));
#if defined(FMC_BANK3)
assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature));
assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime));
assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime));
#endif /* FMC_BANK3 */
/* Set FMC_PCCARD device control parameters */
MODIFY_REG(Device->PCR4,
(FMC_PCR4_PTYP |
FMC_PCR4_PWAITEN |
FMC_PCR4_PWID |
FMC_PCR4_TCLR |
FMC_PCR4_TAR),
(FMC_PCR_MEMORY_TYPE_PCCARD |
Init->Waitfeature |
FMC_NAND_PCC_MEM_BUS_WIDTH_16 |
(Init->TCLRSetupTime << FMC_PCR4_TCLR_Pos) |
(Init->TARSetupTime << FMC_PCR4_TAR_Pos)));
return HAL_OK;
}
/**
* @brief Initializes the FMC_PCCARD Common space Timing according to the specified
* parameters in the FMC_NAND_PCC_TimingTypeDef
* @param Device Pointer to PCCARD device instance
* @param Timing Pointer to PCCARD timing structure
* @retval HAL status
*/
HAL_StatusTypeDef FMC_PCCARD_CommonSpace_Timing_Init(FMC_PCCARD_TypeDef *Device,
FMC_NAND_PCC_TimingTypeDef *Timing)
{
/* Check the parameters */
assert_param(IS_FMC_PCCARD_DEVICE(Device));
#if defined(FMC_BANK3)
assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
#endif /* FMC_BANK3 */
/* Set PCCARD timing parameters */
MODIFY_REG(Device->PMEM4, PMEM4_CLEAR_MASK,
(Timing->SetupTime |
((Timing->WaitSetupTime) << FMC_PMEM4_MEMWAIT4_Pos) |
((Timing->HoldSetupTime) << FMC_PMEM4_MEMHOLD4_Pos) |
((Timing->HiZSetupTime) << FMC_PMEM4_MEMHIZ4_Pos)));
return HAL_OK;
}
/**
* @brief Initializes the FMC_PCCARD Attribute space Timing according to the specified
* parameters in the FMC_NAND_PCC_TimingTypeDef
* @param Device Pointer to PCCARD device instance
* @param Timing Pointer to PCCARD timing structure
* @retval HAL status
*/
HAL_StatusTypeDef FMC_PCCARD_AttributeSpace_Timing_Init(FMC_PCCARD_TypeDef *Device,
FMC_NAND_PCC_TimingTypeDef *Timing)
{
/* Check the parameters */
assert_param(IS_FMC_PCCARD_DEVICE(Device));
#if defined(FMC_BANK3)
assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
#endif /* FMC_BANK3 */
/* Set PCCARD timing parameters */
MODIFY_REG(Device->PATT4, PATT4_CLEAR_MASK,
(Timing->SetupTime |
((Timing->WaitSetupTime) << FMC_PATT4_ATTWAIT4_Pos) |
((Timing->HoldSetupTime) << FMC_PATT4_ATTHOLD4_Pos) |
((Timing->HiZSetupTime) << FMC_PATT4_ATTHIZ4_Pos)));
return HAL_OK;
}
/**
* @brief Initializes the FMC_PCCARD IO space Timing according to the specified
* parameters in the FMC_NAND_PCC_TimingTypeDef
* @param Device Pointer to PCCARD device instance
* @param Timing Pointer to PCCARD timing structure
* @retval HAL status
*/
HAL_StatusTypeDef FMC_PCCARD_IOSpace_Timing_Init(FMC_PCCARD_TypeDef *Device,
FMC_NAND_PCC_TimingTypeDef *Timing)
{
/* Check the parameters */
assert_param(IS_FMC_PCCARD_DEVICE(Device));
#if defined(FMC_BANK3)
assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
#endif /* FMC_BANK3 */
/* Set FMC_PCCARD device timing parameters */
MODIFY_REG(Device->PIO4, PIO4_CLEAR_MASK,
(Timing->SetupTime |
(Timing->WaitSetupTime << FMC_PIO4_IOWAIT4_Pos) |
(Timing->HoldSetupTime << FMC_PIO4_IOHOLD4_Pos) |
(Timing->HiZSetupTime << FMC_PIO4_IOHIZ4_Pos)));
return HAL_OK;
}
/**
* @brief DeInitializes the FMC_PCCARD device
* @param Device Pointer to PCCARD device instance
* @retval HAL status
*/
HAL_StatusTypeDef FMC_PCCARD_DeInit(FMC_PCCARD_TypeDef *Device)
{
/* Check the parameters */
assert_param(IS_FMC_PCCARD_DEVICE(Device));
/* Disable the FMC_PCCARD device */
__FMC_PCCARD_DISABLE(Device);
/* De-initialize the FMC_PCCARD device */
Device->PCR4 = 0x00000018U;
Device->SR4 = 0x00000040U;
Device->PMEM4 = 0xFCFCFCFCU;
Device->PATT4 = 0xFCFCFCFCU;
Device->PIO4 = 0xFCFCFCFCU;
return HAL_OK;
}
/**
* @}
*/
#endif /* FMC_BANK4 */
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_NOR_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/