[LL][RTC] Correct misleading note about shadow registers
diff --git a/Inc/stm32f3xx_ll_rtc.h b/Inc/stm32f3xx_ll_rtc.h
index 6449bc8..505d411 100644
--- a/Inc/stm32f3xx_ll_rtc.h
+++ b/Inc/stm32f3xx_ll_rtc.h
@@ -1104,7 +1104,7 @@
/**
* @brief Get time format (AM or PM notation)
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
* shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1138,7 +1138,7 @@
/**
* @brief Get Hours in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
* shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1173,7 +1173,7 @@
/**
* @brief Get Minutes in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
* shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1208,7 +1208,7 @@
/**
* @brief Get Seconds in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
* shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1258,7 +1258,7 @@
/**
* @brief Get time (hour, minute and second) in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
* shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1400,7 +1400,7 @@
/**
* @brief Get Year in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Year from BCD to Binary format
* @rmtoll DR YT LL_RTC_DATE_GetYear\n
@@ -1434,7 +1434,7 @@
/**
* @brief Get Week day
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @rmtoll DR WDU LL_RTC_DATE_GetWeekDay
* @param RTCx RTC Instance
@@ -1481,7 +1481,7 @@
/**
* @brief Get Month in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format
* @rmtoll DR MT LL_RTC_DATE_GetMonth\n
@@ -1523,7 +1523,7 @@
/**
* @brief Get Day in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format
* @rmtoll DR DT LL_RTC_DATE_GetDay\n
@@ -1585,7 +1585,7 @@
/**
* @brief Get date (WeekDay, Day, Month and Year) in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_YEAR, __LL_RTC_GET_MONTH,
* and __LL_RTC_GET_DAY are available to get independently each parameter.