| /** |
| ****************************************************************************** |
| * @file stm32f3xx_hal_opamp.h |
| * @author MCD Application Team |
| * @brief Header file of OPAMP HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2016 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32F3xx_HAL_OPAMP_H |
| #define STM32F3xx_HAL_OPAMP_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #if defined (OPAMP1) || defined (OPAMP2) || defined (OPAMP3) || defined (OPAMP4) |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f3xx_hal_def.h" |
| |
| /** @addtogroup STM32F3xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup OPAMP |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup OPAMP_Exported_Types OPAMP Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief OPAMP Init structure definition |
| */ |
| |
| typedef struct |
| { |
| uint32_t Mode; /*!< Specifies the OPAMP mode |
| This parameter must be a value of @ref OPAMP_Mode |
| mode is either Standalone, - Follower or PGA */ |
| |
| uint32_t InvertingInput; /*!< Specifies the inverting input in Standalone & Pga modes |
| - In Standalone mode: i.e when mode is OPAMP_STANDALONE_MODE |
| This parameter must be a value of @ref OPAMP_InvertingInput |
| InvertingInput is either VM0 or VM1 |
| - In PGA mode: i.e when mode is OPAMP_PGA_MODE |
| & in Follower mode i.e when mode is OPAMP_FOLLOWER_MODE |
| This parameter is Not Applicable */ |
| |
| uint32_t NonInvertingInput; /*!< Specifies the non inverting input of the opamp: |
| This parameter must be a value of @ref OPAMP_NonInvertingInput |
| NonInvertingInput is either VP0, VP1, VP2 or VP3 */ |
| |
| uint32_t TimerControlledMuxmode; /*!< Specifies if the Timer controlled Mux mode is enabled or disabled |
| This parameter must be a value of @ref OPAMP_TimerControlledMuxmode */ |
| |
| uint32_t InvertingInputSecondary; /*!< Specifies the inverting input (secondary) of the opamp when |
| TimerControlledMuxmode is enabled |
| i.e. when TimerControlledMuxmode is OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE |
| - In Standalone mode: i.e when mode is OPAMP_STANDALONE_MODE |
| This parameter must be a value of @ref OPAMP_InvertingInputSecondary |
| InvertingInputSecondary is either VM0 or VM1 |
| - In PGA mode: i.e when mode is OPAMP_PGA_MODE |
| & in Follower mode i.e when mode is OPAMP_FOLLOWER_MODE |
| This parameter is Not Applicable */ |
| |
| uint32_t NonInvertingInputSecondary; /*!< Specifies the non inverting input (secondary) of the opamp when |
| TimerControlledMuxmode is enabled |
| i.e. when TimerControlledMuxmode is OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE |
| This parameter must be a value of @ref OPAMP_NonInvertingInputSecondary |
| NonInvertingInput is either VP0, VP1, VP2 or VP3 */ |
| |
| uint32_t PgaConnect; /*!< Specifies the inverting pin in PGA mode |
| i.e. when mode is OPAMP_PGA_MODE |
| This parameter must be a value of @ref OPAMP_PgaConnect |
| Either: not connected, connected to VM0, connected to VM1 |
| (VM0 or VM1 are typically used for external filtering) */ |
| |
| uint32_t PgaGain; /*!< Specifies the gain in PGA mode |
| i.e. when mode is OPAMP_PGA_MODE. |
| This parameter must be a value of @ref OPAMP_PgaGain (2U, 4U, 8 or 16U ) */ |
| |
| uint32_t UserTrimming; /*!< Specifies the trimming mode |
| This parameter must be a value of @ref OPAMP_UserTrimming |
| UserTrimming is either factory or user trimming */ |
| |
| uint32_t TrimmingValueP; /*!< Specifies the offset trimming value (PMOS) |
| i.e. when UserTrimming is OPAMP_TRIMMING_USER. |
| This parameter must be a number between Min_Data = 1 and Max_Data = 31U */ |
| |
| uint32_t TrimmingValueN; /*!< Specifies the offset trimming value (NMOS) |
| i.e. when UserTrimming is OPAMP_TRIMMING_USER. |
| This parameter must be a number between Min_Data = 1 and Max_Data = 31U */ |
| |
| } OPAMP_InitTypeDef; |
| |
| /** |
| * @brief HAL State structures definition |
| */ |
| |
| typedef enum |
| { |
| HAL_OPAMP_STATE_RESET = 0x00000000U, /*!< OPMAP is not yet Initialized */ |
| |
| HAL_OPAMP_STATE_READY = 0x00000001U, /*!< OPAMP is initialized and ready for use */ |
| HAL_OPAMP_STATE_CALIBBUSY = 0x00000002U, /*!< OPAMP is enabled in auto calibration mode */ |
| |
| HAL_OPAMP_STATE_BUSY = 0x00000004U, /*!< OPAMP is enabled and running in normal mode */ |
| HAL_OPAMP_STATE_BUSYLOCKED = 0x00000005U, /*!< OPAMP is locked |
| only system reset allows reconfiguring the opamp. */ |
| |
| }HAL_OPAMP_StateTypeDef; |
| |
| /** |
| * @brief OPAMP Handle Structure definition to @brief OPAMP Handle Structure definition |
| */ |
| #if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1) |
| typedef struct __OPAMP_HandleTypeDef |
| #else |
| typedef struct |
| #endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */ |
| { |
| OPAMP_TypeDef *Instance; /*!< OPAMP instance's registers base address */ |
| OPAMP_InitTypeDef Init; /*!< OPAMP required parameters */ |
| HAL_StatusTypeDef Status; /*!< OPAMP peripheral status */ |
| HAL_LockTypeDef Lock; /*!< Locking object */ |
| __IO HAL_OPAMP_StateTypeDef State; /*!< OPAMP communication state */ |
| |
| #if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1) |
| void (* MspInitCallback) (struct __OPAMP_HandleTypeDef *hopamp); |
| void (* MspDeInitCallback) (struct __OPAMP_HandleTypeDef *hopamp); |
| #endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */ |
| |
| } OPAMP_HandleTypeDef; |
| |
| /** |
| * @brief OPAMP_TrimmingValueTypeDef @brief definition |
| */ |
| |
| typedef uint32_t OPAMP_TrimmingValueTypeDef; |
| /** |
| * @} |
| */ |
| |
| #if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1) |
| /** |
| * @brief HAL OPAMP Callback ID enumeration definition |
| */ |
| typedef enum |
| { |
| HAL_OPAMP_MSP_INIT_CB_ID = 0x01U, /*!< OPAMP MspInit Callback ID */ |
| HAL_OPAMP_MSP_DEINIT_CB_ID = 0x02U, /*!< OPAMP MspDeInit Callback ID */ |
| HAL_OPAMP_ALL_CB_ID = 0x03U /*!< OPAMP All ID */ |
| } HAL_OPAMP_CallbackIDTypeDef; |
| |
| /** |
| * @brief HAL OPAMP Callback pointer definition |
| */ |
| typedef void (*pOPAMP_CallbackTypeDef)(OPAMP_HandleTypeDef *hopamp); |
| #endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup OPAMP_Exported_Constants OPAMP Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup OPAMP_CSR_INIT OPAMP CSR init register Mask |
| * @{ |
| */ |
| /* Used for Init phase */ |
| #define OPAMP_CSR_UPDATE_PARAMETERS_INIT_MASK (OPAMP_CSR_TRIMOFFSETN | OPAMP_CSR_TRIMOFFSETP \ |
| | OPAMP_CSR_USERTRIM | OPAMP_CSR_PGGAIN | OPAMP_CSR_VPSSEL \ |
| | OPAMP_CSR_VMSSEL | OPAMP_CSR_TCMEN | OPAMP_CSR_VPSEL \ |
| | OPAMP_CSR_VMSEL | OPAMP_CSR_FORCEVP) |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup OPAMP_Mode OPAMP Mode |
| * @{ |
| */ |
| #define OPAMP_STANDALONE_MODE (0x00000000U) /*!< standalone mode */ |
| #define OPAMP_PGA_MODE OPAMP_CSR_VMSEL_1 /*!< PGA mode */ |
| #define OPAMP_FOLLOWER_MODE OPAMP_CSR_VMSEL /*!< follower mode */ |
| |
| |
| #define IS_OPAMP_FUNCTIONAL_NORMALMODE(INPUT) (((INPUT) == OPAMP_STANDALONE_MODE) || \ |
| ((INPUT) == OPAMP_PGA_MODE) || \ |
| ((INPUT) == OPAMP_FOLLOWER_MODE)) |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup OPAMP_NonInvertingInput OPAMP Non Inverting Input |
| * @{ |
| */ |
| |
| #define OPAMP_NONINVERTINGINPUT_IO0 OPAMP_CSR_VPSEL /*!< VP0 (PA1 for OPAMP1, VP0 PA7 for OPAMP2, VP0 PB0 for OPAMP3, VP0 PB13 for OPAMP4) |
| connected to OPAMPx non inverting input */ |
| #define OPAMP_NONINVERTINGINPUT_IO1 (0x00000000U) /*!< VP1 (PA7 for OPAMP1, VP3 PD14 for OPAMP2, VP1 PB13 for OPAMP3, VP1 PD11 for OPAMP4) |
| connected to OPAMPx non inverting input */ |
| #define OPAMP_NONINVERTINGINPUT_IO2 OPAMP_CSR_VPSEL_1 /*!< VP2 (PA3 for OPAMP1, VP2 PB0 for OPAMP2, VP2 PA1 for OPAMP3, VP3 PA4 for OPAMP4) |
| connected to OPAMPx non inverting input */ |
| #define OPAMP_NONINVERTINGINPUT_IO3 OPAMP_CSR_VPSEL_0 /*!< VP3 (PA5 for OPAMP1, VP1 PB14 for OPAMP2, VP3 PA5 for OPAMP3, VP2 PB11 for OPAMP4) |
| connected to OPAMPx non inverting input */ |
| |
| #define IS_OPAMP_NONINVERTING_INPUT(INPUT) (((INPUT) == OPAMP_NONINVERTINGINPUT_IO0) || \ |
| ((INPUT) == OPAMP_NONINVERTINGINPUT_IO1) || \ |
| ((INPUT) == OPAMP_NONINVERTINGINPUT_IO2) || \ |
| ((INPUT) == OPAMP_NONINVERTINGINPUT_IO3)) |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup OPAMP_InvertingInput OPAMP Inverting Input |
| * @{ |
| */ |
| |
| #define OPAMP_INVERTINGINPUT_IO0 (0x00000000U) /*!< inverting input connected to VM0 */ |
| #define OPAMP_INVERTINGINPUT_IO1 OPAMP_CSR_VMSEL_0 /*!< inverting input connected to VM1 */ |
| |
| #define IS_OPAMP_INVERTING_INPUT(INPUT) (((INPUT) == OPAMP_INVERTINGINPUT_IO0) || \ |
| ((INPUT) == OPAMP_INVERTINGINPUT_IO1)) |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup OPAMP_TimerControlledMuxmode OPAMP Timer Controlled Mux mode |
| * @{ |
| */ |
| #define OPAMP_TIMERCONTROLLEDMUXMODE_DISABLE (0x00000000U) /*!< Timer controlled Mux mode disabled */ |
| #define OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE OPAMP_CSR_TCMEN /*!< Timer controlled Mux mode enabled */ |
| |
| #define IS_OPAMP_TIMERCONTROLLED_MUXMODE(MUXMODE) (((MUXMODE) == OPAMP_TIMERCONTROLLEDMUXMODE_DISABLE) || \ |
| ((MUXMODE) == OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE)) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup OPAMP_NonInvertingInputSecondary OPAMP Non Inverting Input Secondary |
| * @{ |
| */ |
| |
| #define OPAMP_SEC_NONINVERTINGINPUT_IO0 OPAMP_CSR_VPSSEL /*!< VP0 (PA1 for OPAMP1, PA7 for OPAMP2, PB0 for OPAMP3, PB13 for OPAMP4) |
| connected to OPAMPx non inverting input */ |
| #define OPAMP_SEC_NONINVERTINGINPUT_IO1 (0x00000000U) /*!< VP1 (PA7 for OPAMP1, PD14 for OPAMP2, PB13 for OPAMP3, PD11 for OPAMP4) |
| connected to OPAMPx non inverting input */ |
| #define OPAMP_SEC_NONINVERTINGINPUT_IO2 OPAMP_CSR_VPSSEL_1 /*!< VP2 (PA3 for OPAMP1, PB0 for OPAMP2, PA1 for OPAMP3, PA4 for OPAMP4) |
| connected to OPAMPx non inverting input */ |
| #define OPAMP_SEC_NONINVERTINGINPUT_IO3 OPAMP_CSR_VPSSEL_0 /*!< VP3 (PA5 for OPAMP1, PB14 for OPAMP2, PA5 for OPAMP3, PB11 for OPAMP4) |
| connected to OPAMPx non inverting input */ |
| |
| #define IS_OPAMP_SEC_NONINVERTINGINPUT(INPUT) (((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_IO0) || \ |
| ((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_IO1) || \ |
| ((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_IO2) || \ |
| ((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_IO3)) |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup OPAMP_InvertingInputSecondary OPAMP Inverting Input Secondary |
| * @{ |
| */ |
| |
| #define OPAMP_SEC_INVERTINGINPUT_IO0 (0x00000000U) /*!< VM0 (PC5 for OPAMP1 and OPAMP2, PB10 for OPAMP3 and OPAMP4) |
| connected to OPAMPx inverting input */ |
| #define OPAMP_SEC_INVERTINGINPUT_IO1 OPAMP_CSR_VMSSEL /*!< VM1 (PA3 for OPAMP1, PA5 for OPAMP2, PB2 for OPAMP3, PD8 for OPAMP4) |
| connected to OPAMPx inverting input */ |
| |
| #define IS_OPAMP_SEC_INVERTINGINPUT(INPUT) (((INPUT) == OPAMP_SEC_INVERTINGINPUT_IO0) || \ |
| ((INPUT) == OPAMP_SEC_INVERTINGINPUT_IO1)) |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup OPAMP_PgaConnect OPAMP Pga Connect |
| * @{ |
| */ |
| |
| #define OPAMP_PGA_CONNECT_INVERTINGINPUT_NO (0x00000000U) /*!< In PGA mode, the non inverting input is not connected */ |
| #define OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0 OPAMP_CSR_PGGAIN_3 /*!< In PGA mode, the non inverting input is connected to VM0 */ |
| #define OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1 (OPAMP_CSR_PGGAIN_2 | OPAMP_CSR_PGGAIN_3) /*!< In PGA mode, the non inverting input is connected to VM1 */ |
| |
| #define IS_OPAMP_PGACONNECT(CONNECT) (((CONNECT) == OPAMP_PGA_CONNECT_INVERTINGINPUT_NO) || \ |
| ((CONNECT) == OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0) || \ |
| ((CONNECT) == OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1)) |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup OPAMP_PgaGain OPAMP Pga Gain |
| * @{ |
| */ |
| |
| #define OPAMP_PGA_GAIN_2 (0x00000000U) /*!< PGA gain = 2 */ |
| #define OPAMP_PGA_GAIN_4 OPAMP_CSR_PGGAIN_0 /*!< PGA gain = 4 */ |
| #define OPAMP_PGA_GAIN_8 OPAMP_CSR_PGGAIN_1 /*!< PGA gain = 8 */ |
| #define OPAMP_PGA_GAIN_16 (OPAMP_CSR_PGGAIN_0 | OPAMP_CSR_PGGAIN_1) /*!< PGA gain = 16 */ |
| |
| #define IS_OPAMP_PGA_GAIN(GAIN) (((GAIN) == OPAMP_PGA_GAIN_2) || \ |
| ((GAIN) == OPAMP_PGA_GAIN_4) || \ |
| ((GAIN) == OPAMP_PGA_GAIN_8) || \ |
| ((GAIN) == OPAMP_PGA_GAIN_16)) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup OPAMP_UserTrimming OPAMP User Trimming |
| * @{ |
| */ |
| |
| #define OPAMP_TRIMMING_FACTORY (0x00000000U) /*!< Factory trimming */ |
| #define OPAMP_TRIMMING_USER OPAMP_CSR_USERTRIM /*!< User trimming */ |
| |
| #define IS_OPAMP_TRIMMING(TRIMMING) (((TRIMMING) == OPAMP_TRIMMING_FACTORY) || \ |
| ((TRIMMING) == OPAMP_TRIMMING_USER)) |
| |
| /** @defgroup OPAMP_FactoryTrimming OPAMP Factory Trimming |
| * @{ |
| */ |
| |
| #define OPAMP_FACTORYTRIMMING_DUMMY (0xFFFFFFFFU) /*!< Dummy trimming value */ |
| |
| #define OPAMP_FACTORYTRIMMING_N (0x00000000U) /*!< Offset trimming N */ |
| #define OPAMP_FACTORYTRIMMING_P (0x00000001U) /*!< Offset trimming P */ |
| |
| #define IS_OPAMP_FACTORYTRIMMING(TRIMMING) (((TRIMMING) == OPAMP_FACTORYTRIMMING_N) || \ |
| ((TRIMMING) == OPAMP_FACTORYTRIMMING_P)) |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup OPAMP_TrimmingValue OPAMP Trimming Value |
| * @{ |
| */ |
| |
| #define IS_OPAMP_TRIMMINGVALUE(TRIMMINGVALUE) ((TRIMMINGVALUE) <= 0x1FU) |
| |
| |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup OPAMP_Input OPAMP Input |
| * @{ |
| */ |
| |
| #define OPAMP_INPUT_INVERTING (24U) /*!< Inverting input */ |
| #define OPAMP_INPUT_NONINVERTING (19U) /*!< Non inverting input */ |
| |
| #define IS_OPAMP_INPUT(INPUT) (((INPUT) == OPAMP_INPUT_INVERTING) || \ |
| ((INPUT) == OPAMP_INPUT_NONINVERTING)) |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup OPAMP_VREF OPAMP VREF |
| * @{ |
| */ |
| |
| #define OPAMP_VREF_3VDDA (0x00000000U) /*!< OPMAP Vref = 3.3U% VDDA */ |
| #define OPAMP_VREF_10VDDA OPAMP_CSR_CALSEL_0 /*!< OPMAP Vref = 10U% VDDA */ |
| #define OPAMP_VREF_50VDDA OPAMP_CSR_CALSEL_1 /*!< OPMAP Vref = 50U% VDDA */ |
| #define OPAMP_VREF_90VDDA OPAMP_CSR_CALSEL /*!< OPMAP Vref = 90U% VDDA */ |
| |
| #define IS_OPAMP_VREF(VREF) (((VREF) == OPAMP_VREF_3VDDA) || \ |
| ((VREF) == OPAMP_VREF_10VDDA) || \ |
| ((VREF) == OPAMP_VREF_50VDDA) || \ |
| ((VREF) == OPAMP_VREF_90VDDA)) |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup OPAMP_Vref2ADCforCalib OPAMP Vref2ADCforCalib |
| * @{ |
| */ |
| |
| #define OPAMP_VREF_NOTCONNECTEDTO_ADC (0x00000000U) /*!< VREF not connected to ADC */ |
| #define OPAMP_VREF_CONNECTEDTO_ADC (0x00000001U) /*!< VREF not connected to ADC */ |
| |
| #define IS_OPAMP_ALLOPAMPVREF_CONNECT(CONNECT) (((CONNECT) == OPAMP_VREF_NOTCONNECTEDTO_ADC) || \ |
| ((CONNECT) == OPAMP_VREF_CONNECTEDTO_ADC)) |
| |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| /** @defgroup OPAMP_Exported_Macros OPAMP Exported Macros |
| * @{ |
| */ |
| |
| /** @brief Reset OPAMP handle state |
| * @param __HANDLE__ OPAMP handle. |
| * @retval None |
| */ |
| #if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1) |
| #define __HAL_OPAMP_RESET_HANDLE_STATE(__HANDLE__) do { \ |
| (__HANDLE__)->State = HAL_OPAMP_STATE_RESET; \ |
| (__HANDLE__)->MspInitCallback = NULL; \ |
| (__HANDLE__)->MspDeInitCallback = NULL; \ |
| } while(0) |
| #else |
| #define __HAL_OPAMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_OPAMP_STATE_RESET) |
| #endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Include OPAMP HAL Extended module */ |
| #include "stm32f3xx_hal_opamp_ex.h" |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @defgroup OPAMP_Exported_Functions OPAMP Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup OPAMP_Exported_Functions_Group1 Initialization and de-initialization functions |
| * @{ |
| */ |
| |
| /* Initialization/de-initialization functions **********************************/ |
| HAL_StatusTypeDef HAL_OPAMP_Init(OPAMP_HandleTypeDef *hopamp); |
| HAL_StatusTypeDef HAL_OPAMP_DeInit(OPAMP_HandleTypeDef *hopamp); |
| void HAL_OPAMP_MspInit(OPAMP_HandleTypeDef *hopamp); |
| void HAL_OPAMP_MspDeInit(OPAMP_HandleTypeDef *hopamp); |
| /** |
| * @} |
| */ |
| |
| |
| /** @defgroup OPAMP_Exported_Functions_Group2 Input and Output operation functions |
| * @{ |
| */ |
| |
| /* I/O operation functions *****************************************************/ |
| HAL_StatusTypeDef HAL_OPAMP_Start(OPAMP_HandleTypeDef *hopamp); |
| HAL_StatusTypeDef HAL_OPAMP_Stop(OPAMP_HandleTypeDef *hopamp); |
| HAL_StatusTypeDef HAL_OPAMP_SelfCalibrate(OPAMP_HandleTypeDef *hopamp); |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup OPAMP_Exported_Functions_Group3 Peripheral Control functions |
| * @{ |
| */ |
| |
| /* Peripheral Control functions ************************************************/ |
| #if (USE_HAL_OPAMP_REGISTER_CALLBACKS == 1) |
| /* OPAMP callback registering/unregistering */ |
| HAL_StatusTypeDef HAL_OPAMP_RegisterCallback(OPAMP_HandleTypeDef *hopamp, HAL_OPAMP_CallbackIDTypeDef CallbackId, pOPAMP_CallbackTypeDef pCallback); |
| HAL_StatusTypeDef HAL_OPAMP_UnRegisterCallback(OPAMP_HandleTypeDef *hopamp, HAL_OPAMP_CallbackIDTypeDef CallbackId); |
| #endif /* USE_HAL_OPAMP_REGISTER_CALLBACKS */ |
| |
| HAL_StatusTypeDef HAL_OPAMP_Lock(OPAMP_HandleTypeDef *hopamp); |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup OPAMP_Exported_Functions_Group4 Peripheral State functions |
| * @{ |
| */ |
| |
| /* Peripheral State functions **************************************************/ |
| HAL_OPAMP_StateTypeDef HAL_OPAMP_GetState(OPAMP_HandleTypeDef *hopamp); |
| OPAMP_TrimmingValueTypeDef HAL_OPAMP_GetTrimOffset(OPAMP_HandleTypeDef *hopamp, uint32_t trimmingoffset); |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* OPAMP1 || OPAMP2 || OPAMP3 || OPAMP4 */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* STM32F3xx_HAL_OPAMP_H */ |
| |
