| /** |
| ****************************************************************************** |
| * @file stm32f4xx_hal_dac_ex.c |
| * @author MCD Application Team |
| * @brief DAC HAL module driver. |
| * This file provides firmware functions to manage the following |
| * functionalities of DAC extension peripheral: |
| * + Extended features functions |
| * |
| * |
| @verbatim |
| ============================================================================== |
| ##### How to use this driver ##### |
| ============================================================================== |
| [..] |
| (+) When Dual mode is enabled (i.e DAC Channel1 and Channel2 are used simultaneously) : |
| Use HAL_DACEx_DualGetValue() to get digital data to be converted and use |
| HAL_DACEx_DualSetValue() to set digital value to converted simultaneously in Channel 1 and Channel 2. |
| (+) Use HAL_DACEx_TriangleWaveGenerate() to generate Triangle signal. |
| (+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal. |
| |
| @endverbatim |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© Copyright (c) 2017 STMicroelectronics. |
| * All rights reserved.</center></h2> |
| * |
| * This software component is licensed by ST under BSD 3-Clause license, |
| * the "License"; You may not use this file except in compliance with the |
| * License. You may obtain a copy of the License at: |
| * opensource.org/licenses/BSD-3-Clause |
| * |
| ****************************************************************************** |
| */ |
| |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f4xx_hal.h" |
| |
| /** @addtogroup STM32F4xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @defgroup DACEx DACEx |
| * @brief DAC driver modules |
| * @{ |
| */ |
| |
| #ifdef HAL_DAC_MODULE_ENABLED |
| |
| #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ |
| defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ |
| defined(STM32F410Tx) || defined(STM32F410Cx) || defined(STM32F410Rx) || defined(STM32F446xx) ||\ |
| defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F413xx) || defined(STM32F423xx) |
| /* Private typedef -----------------------------------------------------------*/ |
| /* Private define ------------------------------------------------------------*/ |
| /* Private macro -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private function prototypes -----------------------------------------------*/ |
| /* Private functions ---------------------------------------------------------*/ |
| /* Exported functions --------------------------------------------------------*/ |
| /** @defgroup DACEx_Exported_Functions DAC Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup DACEx_Exported_Functions_Group1 Extended features functions |
| * @brief Extended features functions |
| * |
| @verbatim |
| ============================================================================== |
| ##### Extended features functions ##### |
| ============================================================================== |
| [..] This section provides functions allowing to: |
| (+) Start conversion. |
| (+) Stop conversion. |
| (+) Start conversion and enable DMA transfer. |
| (+) Stop conversion and disable DMA transfer. |
| (+) Get result of conversion. |
| (+) Get result of dual mode conversion. |
| |
| @endverbatim |
| * @{ |
| */ |
| |
| /** |
| * @brief Returns the last data output value of the selected DAC channel. |
| * @param hdac pointer to a DAC_HandleTypeDef structure that contains |
| * the configuration information for the specified DAC. |
| * @retval The selected DAC channel data output value. |
| */ |
| uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac) |
| { |
| uint32_t tmp = 0U; |
| |
| tmp |= hdac->Instance->DOR1; |
| |
| tmp |= hdac->Instance->DOR2 << 16U; |
| |
| /* Returns the DAC channel data output register value */ |
| return tmp; |
| } |
| |
| /** |
| * @brief Enables or disables the selected DAC channel wave generation. |
| * @param hdac pointer to a DAC_HandleTypeDef structure that contains |
| * the configuration information for the specified DAC. |
| * @param Channel The selected DAC channel. |
| * This parameter can be one of the following values: |
| * DAC_CHANNEL_1 / DAC_CHANNEL_2 |
| * @param Amplitude Select max triangle amplitude. |
| * This parameter can be one of the following values: |
| * @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1 |
| * @arg DAC_TRIANGLEAMPLITUDE_3: Select max triangle amplitude of 3 |
| * @arg DAC_TRIANGLEAMPLITUDE_7: Select max triangle amplitude of 7 |
| * @arg DAC_TRIANGLEAMPLITUDE_15: Select max triangle amplitude of 15 |
| * @arg DAC_TRIANGLEAMPLITUDE_31: Select max triangle amplitude of 31 |
| * @arg DAC_TRIANGLEAMPLITUDE_63: Select max triangle amplitude of 63 |
| * @arg DAC_TRIANGLEAMPLITUDE_127: Select max triangle amplitude of 127 |
| * @arg DAC_TRIANGLEAMPLITUDE_255: Select max triangle amplitude of 255 |
| * @arg DAC_TRIANGLEAMPLITUDE_511: Select max triangle amplitude of 511 |
| * @arg DAC_TRIANGLEAMPLITUDE_1023: Select max triangle amplitude of 1023 |
| * @arg DAC_TRIANGLEAMPLITUDE_2047: Select max triangle amplitude of 2047 |
| * @arg DAC_TRIANGLEAMPLITUDE_4095: Select max triangle amplitude of 4095 |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude) |
| { |
| /* Check the parameters */ |
| assert_param(IS_DAC_CHANNEL(Channel)); |
| assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude)); |
| |
| /* Process locked */ |
| __HAL_LOCK(hdac); |
| |
| /* Change DAC state */ |
| hdac->State = HAL_DAC_STATE_BUSY; |
| |
| /* Enable the selected wave generation for the selected DAC channel */ |
| MODIFY_REG(hdac->Instance->CR, (DAC_CR_WAVE1 | DAC_CR_MAMP1) << Channel, (DAC_CR_WAVE1_1 | Amplitude) << Channel); |
| |
| /* Change DAC state */ |
| hdac->State = HAL_DAC_STATE_READY; |
| |
| /* Process unlocked */ |
| __HAL_UNLOCK(hdac); |
| |
| /* Return function status */ |
| return HAL_OK; |
| } |
| |
| /** |
| * @brief Enables or disables the selected DAC channel wave generation. |
| * @param hdac pointer to a DAC_HandleTypeDef structure that contains |
| * the configuration information for the specified DAC. |
| * @param Channel The selected DAC channel. |
| * This parameter can be one of the following values: |
| * DAC_CHANNEL_1 / DAC_CHANNEL_2 |
| * @param Amplitude Unmask DAC channel LFSR for noise wave generation. |
| * This parameter can be one of the following values: |
| * @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation |
| * @arg DAC_LFSRUNMASK_BITS1_0: Unmask DAC channel LFSR bit[1:0] for noise wave generation |
| * @arg DAC_LFSRUNMASK_BITS2_0: Unmask DAC channel LFSR bit[2:0] for noise wave generation |
| * @arg DAC_LFSRUNMASK_BITS3_0: Unmask DAC channel LFSR bit[3:0] for noise wave generation |
| * @arg DAC_LFSRUNMASK_BITS4_0: Unmask DAC channel LFSR bit[4:0] for noise wave generation |
| * @arg DAC_LFSRUNMASK_BITS5_0: Unmask DAC channel LFSR bit[5:0] for noise wave generation |
| * @arg DAC_LFSRUNMASK_BITS6_0: Unmask DAC channel LFSR bit[6:0] for noise wave generation |
| * @arg DAC_LFSRUNMASK_BITS7_0: Unmask DAC channel LFSR bit[7:0] for noise wave generation |
| * @arg DAC_LFSRUNMASK_BITS8_0: Unmask DAC channel LFSR bit[8:0] for noise wave generation |
| * @arg DAC_LFSRUNMASK_BITS9_0: Unmask DAC channel LFSR bit[9:0] for noise wave generation |
| * @arg DAC_LFSRUNMASK_BITS10_0: Unmask DAC channel LFSR bit[10:0] for noise wave generation |
| * @arg DAC_LFSRUNMASK_BITS11_0: Unmask DAC channel LFSR bit[11:0] for noise wave generation |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude) |
| { |
| /* Check the parameters */ |
| assert_param(IS_DAC_CHANNEL(Channel)); |
| assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude)); |
| |
| /* Process locked */ |
| __HAL_LOCK(hdac); |
| |
| /* Change DAC state */ |
| hdac->State = HAL_DAC_STATE_BUSY; |
| |
| /* Enable the selected wave generation for the selected DAC channel */ |
| MODIFY_REG(hdac->Instance->CR, (DAC_CR_WAVE1 | DAC_CR_MAMP1) << Channel, (DAC_CR_WAVE1_0 | Amplitude) << Channel); |
| |
| /* Change DAC state */ |
| hdac->State = HAL_DAC_STATE_READY; |
| |
| /* Process unlocked */ |
| __HAL_UNLOCK(hdac); |
| |
| /* Return function status */ |
| return HAL_OK; |
| } |
| |
| /** |
| * @brief Set the specified data holding register value for dual DAC channel. |
| * @param hdac pointer to a DAC_HandleTypeDef structure that contains |
| * the configuration information for the specified DAC. |
| * @param Alignment Specifies the data alignment for dual channel DAC. |
| * This parameter can be one of the following values: |
| * DAC_ALIGN_8B_R: 8bit right data alignment selected |
| * DAC_ALIGN_12B_L: 12bit left data alignment selected |
| * DAC_ALIGN_12B_R: 12bit right data alignment selected |
| * @param Data1 Data for DAC Channel2 to be loaded in the selected data holding register. |
| * @param Data2 Data for DAC Channel1 to be loaded in the selected data holding register. |
| * @note In dual mode, a unique register access is required to write in both |
| * DAC channels at the same time. |
| * @retval HAL status |
| */ |
| HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2) |
| { |
| uint32_t data = 0U, tmp = 0U; |
| |
| /* Check the parameters */ |
| assert_param(IS_DAC_ALIGN(Alignment)); |
| assert_param(IS_DAC_DATA(Data1)); |
| assert_param(IS_DAC_DATA(Data2)); |
| |
| /* Calculate and set dual DAC data holding register value */ |
| if (Alignment == DAC_ALIGN_8B_R) |
| { |
| data = ((uint32_t)Data2 << 8U) | Data1; |
| } |
| else |
| { |
| data = ((uint32_t)Data2 << 16U) | Data1; |
| } |
| |
| tmp = (uint32_t)hdac->Instance; |
| tmp += DAC_DHR12RD_ALIGNMENT(Alignment); |
| |
| /* Set the dual DAC selected data holding register */ |
| *(__IO uint32_t *)tmp = data; |
| |
| /* Return function status */ |
| return HAL_OK; |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @brief Conversion complete callback in non blocking mode for Channel2 |
| * @param hdac pointer to a DAC_HandleTypeDef structure that contains |
| * the configuration information for the specified DAC. |
| * @retval None |
| */ |
| __weak void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac) |
| { |
| /* Prevent unused argument(s) compilation warning */ |
| UNUSED(hdac); |
| /* NOTE : This function Should not be modified, when the callback is needed, |
| the HAL_DAC_ConvCpltCallback could be implemented in the user file |
| */ |
| } |
| |
| /** |
| * @brief Conversion half DMA transfer callback in non blocking mode for Channel2 |
| * @param hdac pointer to a DAC_HandleTypeDef structure that contains |
| * the configuration information for the specified DAC. |
| * @retval None |
| */ |
| __weak void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac) |
| { |
| /* Prevent unused argument(s) compilation warning */ |
| UNUSED(hdac); |
| /* NOTE : This function Should not be modified, when the callback is needed, |
| the HAL_DAC_ConvHalfCpltCallbackCh2 could be implemented in the user file |
| */ |
| } |
| |
| /** |
| * @brief Error DAC callback for Channel2. |
| * @param hdac pointer to a DAC_HandleTypeDef structure that contains |
| * the configuration information for the specified DAC. |
| * @retval None |
| */ |
| __weak void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac) |
| { |
| /* Prevent unused argument(s) compilation warning */ |
| UNUSED(hdac); |
| /* NOTE : This function Should not be modified, when the callback is needed, |
| the HAL_DAC_ErrorCallback could be implemented in the user file |
| */ |
| } |
| |
| /** |
| * @brief DMA underrun DAC callback for channel2. |
| * @param hdac pointer to a DAC_HandleTypeDef structure that contains |
| * the configuration information for the specified DAC. |
| * @retval None |
| */ |
| __weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac) |
| { |
| /* Prevent unused argument(s) compilation warning */ |
| UNUSED(hdac); |
| /* NOTE : This function Should not be modified, when the callback is needed, |
| the HAL_DAC_DMAUnderrunCallbackCh2 could be implemented in the user file |
| */ |
| } |
| |
| /** |
| * @brief DMA conversion complete callback. |
| * @param hdma pointer to a DMA_HandleTypeDef structure that contains |
| * the configuration information for the specified DMA module. |
| * @retval None |
| */ |
| void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma) |
| { |
| DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; |
| |
| #if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) |
| hdac->ConvCpltCallbackCh2(hdac); |
| #else |
| HAL_DACEx_ConvCpltCallbackCh2(hdac); |
| #endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ |
| |
| hdac->State= HAL_DAC_STATE_READY; |
| } |
| |
| /** |
| * @brief DMA half transfer complete callback. |
| * @param hdma pointer to a DMA_HandleTypeDef structure that contains |
| * the configuration information for the specified DMA module. |
| * @retval None |
| */ |
| void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma) |
| { |
| DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; |
| /* Conversion complete callback */ |
| #if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) |
| hdac->ConvHalfCpltCallbackCh2(hdac); |
| #else |
| HAL_DACEx_ConvHalfCpltCallbackCh2(hdac); |
| #endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ |
| } |
| |
| /** |
| * @brief DMA error callback |
| * @param hdma pointer to a DMA_HandleTypeDef structure that contains |
| * the configuration information for the specified DMA module. |
| * @retval None |
| */ |
| void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma) |
| { |
| DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; |
| |
| /* Set DAC error code to DMA error */ |
| hdac->ErrorCode |= HAL_DAC_ERROR_DMA; |
| |
| #if (USE_HAL_DAC_REGISTER_CALLBACKS == 1) |
| hdac->ErrorCallbackCh2(hdac); |
| #else |
| HAL_DACEx_ErrorCallbackCh2(hdac); |
| #endif /* USE_HAL_DAC_REGISTER_CALLBACKS */ |
| |
| hdac->State= HAL_DAC_STATE_READY; |
| } |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\ |
| STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\ |
| STM32F410xx || STM32F446xx || STM32F469xx || STM32F479xx ||\ |
| STM32F413xx || STM32F423xx */ |
| |
| #endif /* HAL_DAC_MODULE_ENABLED */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |