blob: 26f650256f3d5efdcf20e9a4452fa80f34b6bb49 [file] [log] [blame]
/**
******************************************************************************
* @file stm32f4xx_hal_nand.h
* @author MCD Application Team
* @brief Header file of NAND HAL module.
******************************************************************************
* @attention
*
* Copyright (c) 2016 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef STM32F4xx_HAL_NAND_H
#define STM32F4xx_HAL_NAND_H
#ifdef __cplusplus
extern "C" {
#endif
#if defined(FMC_Bank3) || defined(FMC_Bank2_3) || defined(FSMC_Bank2_3)
/* Includes ------------------------------------------------------------------*/
#if defined(FSMC_Bank2_3)
#include "stm32f4xx_ll_fsmc.h"
#else
#include "stm32f4xx_ll_fmc.h"
#endif /* FSMC_Bank2_3 */
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup NAND
* @{
*/
/* Exported typedef ----------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup NAND_Exported_Types NAND Exported Types
* @{
*/
/**
* @brief HAL NAND State structures definition
*/
typedef enum
{
HAL_NAND_STATE_RESET = 0x00U, /*!< NAND not yet initialized or disabled */
HAL_NAND_STATE_READY = 0x01U, /*!< NAND initialized and ready for use */
HAL_NAND_STATE_BUSY = 0x02U, /*!< NAND internal process is ongoing */
HAL_NAND_STATE_ERROR = 0x03U /*!< NAND error state */
} HAL_NAND_StateTypeDef;
/**
* @brief NAND Memory electronic signature Structure definition
*/
typedef struct
{
/*<! NAND memory electronic signature maker and device IDs */
uint8_t Maker_Id;
uint8_t Device_Id;
uint8_t Third_Id;
uint8_t Fourth_Id;
} NAND_IDTypeDef;
/**
* @brief NAND Memory address Structure definition
*/
typedef struct
{
uint16_t Page; /*!< NAND memory Page address */
uint16_t Plane; /*!< NAND memory Zone address */
uint16_t Block; /*!< NAND memory Block address */
} NAND_AddressTypeDef;
/**
* @brief NAND Memory info Structure definition
*/
typedef struct
{
uint32_t PageSize; /*!< NAND memory page (without spare area) size measured in bytes
for 8 bits addressing or words for 16 bits addressing */
uint32_t SpareAreaSize; /*!< NAND memory spare area size measured in bytes
for 8 bits addressing or words for 16 bits addressing */
uint32_t BlockSize; /*!< NAND memory block size measured in number of pages */
uint32_t BlockNbr; /*!< NAND memory number of total blocks */
uint32_t PlaneNbr; /*!< NAND memory number of planes */
uint32_t PlaneSize; /*!< NAND memory zone size measured in number of blocks */
FunctionalState ExtraCommandEnable; /*!< NAND extra command needed for Page reading mode. This
parameter is mandatory for some NAND parts after the read
command (NAND_CMD_AREA_TRUE1) and before DATA reading sequence.
Example: Toshiba THTH58BYG3S0HBAI6.
This parameter could be ENABLE or DISABLE
Please check the Read Mode sequnece in the NAND device datasheet */
} NAND_DeviceConfigTypeDef;
/**
* @brief NAND handle Structure definition
*/
#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
typedef struct __NAND_HandleTypeDef
#else
typedef struct
#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
{
FMC_NAND_TypeDef *Instance; /*!< Register base address */
FMC_NAND_InitTypeDef Init; /*!< NAND device control configuration parameters */
HAL_LockTypeDef Lock; /*!< NAND locking object */
__IO HAL_NAND_StateTypeDef State; /*!< NAND device access state */
NAND_DeviceConfigTypeDef Config; /*!< NAND phusical characteristic information structure */
#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
void (* MspInitCallback)(struct __NAND_HandleTypeDef *hnand); /*!< NAND Msp Init callback */
void (* MspDeInitCallback)(struct __NAND_HandleTypeDef *hnand); /*!< NAND Msp DeInit callback */
void (* ItCallback)(struct __NAND_HandleTypeDef *hnand); /*!< NAND IT callback */
#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
} NAND_HandleTypeDef;
#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
/**
* @brief HAL NAND Callback ID enumeration definition
*/
typedef enum
{
HAL_NAND_MSP_INIT_CB_ID = 0x00U, /*!< NAND MspInit Callback ID */
HAL_NAND_MSP_DEINIT_CB_ID = 0x01U, /*!< NAND MspDeInit Callback ID */
HAL_NAND_IT_CB_ID = 0x02U /*!< NAND IT Callback ID */
} HAL_NAND_CallbackIDTypeDef;
/**
* @brief HAL NAND Callback pointer definition
*/
typedef void (*pNAND_CallbackTypeDef)(NAND_HandleTypeDef *hnand);
#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup NAND_Exported_Macros NAND Exported Macros
* @{
*/
/** @brief Reset NAND handle state
* @param __HANDLE__ specifies the NAND handle.
* @retval None
*/
#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) do { \
(__HANDLE__)->State = HAL_NAND_STATE_RESET; \
(__HANDLE__)->MspInitCallback = NULL; \
(__HANDLE__)->MspDeInitCallback = NULL; \
} while(0)
#else
#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET)
#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup NAND_Exported_Functions NAND Exported Functions
* @{
*/
/** @addtogroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
/* Initialization/de-initialization functions ********************************/
HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing,
FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing);
HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand);
HAL_StatusTypeDef HAL_NAND_ConfigDevice(NAND_HandleTypeDef *hnand, NAND_DeviceConfigTypeDef *pDeviceConfig);
HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID);
void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand);
void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand);
void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand);
void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand);
/**
* @}
*/
/** @addtogroup NAND_Exported_Functions_Group2 Input and Output functions
* @{
*/
/* IO operation functions ****************************************************/
HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand);
HAL_StatusTypeDef HAL_NAND_Read_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer,
uint32_t NumPageToRead);
HAL_StatusTypeDef HAL_NAND_Write_Page_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer,
uint32_t NumPageToWrite);
HAL_StatusTypeDef HAL_NAND_Read_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress,
uint8_t *pBuffer, uint32_t NumSpareAreaToRead);
HAL_StatusTypeDef HAL_NAND_Write_SpareArea_8b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress,
uint8_t *pBuffer, uint32_t NumSpareAreaTowrite);
HAL_StatusTypeDef HAL_NAND_Read_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer,
uint32_t NumPageToRead);
HAL_StatusTypeDef HAL_NAND_Write_Page_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint16_t *pBuffer,
uint32_t NumPageToWrite);
HAL_StatusTypeDef HAL_NAND_Read_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress,
uint16_t *pBuffer, uint32_t NumSpareAreaToRead);
HAL_StatusTypeDef HAL_NAND_Write_SpareArea_16b(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress,
uint16_t *pBuffer, uint32_t NumSpareAreaTowrite);
HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress);
#if (USE_HAL_NAND_REGISTER_CALLBACKS == 1)
/* NAND callback registering/unregistering */
HAL_StatusTypeDef HAL_NAND_RegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId,
pNAND_CallbackTypeDef pCallback);
HAL_StatusTypeDef HAL_NAND_UnRegisterCallback(NAND_HandleTypeDef *hnand, HAL_NAND_CallbackIDTypeDef CallbackId);
#endif /* USE_HAL_NAND_REGISTER_CALLBACKS */
/**
* @}
*/
/** @addtogroup NAND_Exported_Functions_Group3 Peripheral Control functions
* @{
*/
/* NAND Control functions ****************************************************/
HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand);
HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand);
HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout);
/**
* @}
*/
/** @addtogroup NAND_Exported_Functions_Group4 Peripheral State functions
* @{
*/
/* NAND State functions *******************************************************/
HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand);
uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup NAND_Private_Constants NAND Private Constants
* @{
*/
#if defined(FMC_Bank2_3)
#define NAND_DEVICE1 0x70000000UL
#define NAND_DEVICE2 0x80000000UL
#else
#define NAND_DEVICE 0x80000000UL
#endif
#define NAND_WRITE_TIMEOUT 0x01000000UL
#define CMD_AREA (1UL<<16U) /* A16 = CLE high */
#define ADDR_AREA (1UL<<17U) /* A17 = ALE high */
#define NAND_CMD_AREA_A ((uint8_t)0x00)
#define NAND_CMD_AREA_B ((uint8_t)0x01)
#define NAND_CMD_AREA_C ((uint8_t)0x50)
#define NAND_CMD_AREA_TRUE1 ((uint8_t)0x30)
#define NAND_CMD_WRITE0 ((uint8_t)0x80)
#define NAND_CMD_WRITE_TRUE1 ((uint8_t)0x10)
#define NAND_CMD_ERASE0 ((uint8_t)0x60)
#define NAND_CMD_ERASE1 ((uint8_t)0xD0)
#define NAND_CMD_READID ((uint8_t)0x90)
#define NAND_CMD_STATUS ((uint8_t)0x70)
#define NAND_CMD_LOCK_STATUS ((uint8_t)0x7A)
#define NAND_CMD_RESET ((uint8_t)0xFF)
/* NAND memory status */
#define NAND_VALID_ADDRESS 0x00000100UL
#define NAND_INVALID_ADDRESS 0x00000200UL
#define NAND_TIMEOUT_ERROR 0x00000400UL
#define NAND_BUSY 0x00000000UL
#define NAND_ERROR 0x00000001UL
#define NAND_READY 0x00000040UL
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup NAND_Private_Macros NAND Private Macros
* @{
*/
/**
* @brief NAND memory address computation.
* @param __ADDRESS__ NAND memory address.
* @param __HANDLE__ NAND handle.
* @retval NAND Raw address value
*/
#define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \
(((__ADDRESS__)->Block + \
(((__ADDRESS__)->Plane) * \
((__HANDLE__)->Config.PlaneSize))) * \
((__HANDLE__)->Config.BlockSize)))
/**
* @brief NAND memory Column address computation.
* @param __HANDLE__ NAND handle.
* @retval NAND Raw address value
*/
#define COLUMN_ADDRESS( __HANDLE__) ((__HANDLE__)->Config.PageSize)
/**
* @brief NAND memory address cycling.
* @param __ADDRESS__ NAND memory address.
* @retval NAND address cycling value.
*/
#define ADDR_1ST_CYCLE(__ADDRESS__) (uint8_t)(__ADDRESS__) /* 1st addressing cycle */
#define ADDR_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd addressing cycle */
#define ADDR_3RD_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 16) /* 3rd addressing cycle */
#define ADDR_4TH_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 24) /* 4th addressing cycle */
/**
* @brief NAND memory Columns cycling.
* @param __ADDRESS__ NAND memory address.
* @retval NAND Column address cycling value.
*/
#define COLUMN_1ST_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) & 0xFFU) /* 1st Column addressing cycle */
#define COLUMN_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd Column addressing cycle */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* FMC_Bank3) || defined(FMC_Bank2_3) || defined(FSMC_Bank2_3 */
#ifdef __cplusplus
}
#endif
#endif /* STM32F4xx_HAL_NAND_H */