blob: 652eeda37db4620335df16d6be1ea4eae2efe7d3 [file] [log] [blame]
/**
******************************************************************************
* @file stm32f4xx_hal_crc.c
* @author MCD Application Team
* @brief CRC HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Cyclic Redundancy Check (CRC) peripheral:
* + Initialization and de-initialization functions
* + Peripheral Control functions
* + Peripheral State functions
*
@verbatim
===============================================================================
##### How to use this driver #####
===============================================================================
[..]
(+) Enable CRC AHB clock using __HAL_RCC_CRC_CLK_ENABLE();
(+) Initialize CRC calculator
(++) specify generating polynomial (peripheral default or non-default one)
(++) specify initialization value (peripheral default or non-default one)
(++) specify input data format
(++) specify input or output data inversion mode if any
(+) Use HAL_CRC_Accumulate() function to compute the CRC value of the
input data buffer starting with the previously computed CRC as
initialization value
(+) Use HAL_CRC_Calculate() function to compute the CRC value of the
input data buffer starting with the defined initialization value
(default or non-default) to initiate CRC calculation
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>&copy; Copyright (c) 2016 STMicroelectronics.
* All rights reserved.</center></h2>
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup CRC CRC
* @brief CRC HAL module driver.
* @{
*/
#ifdef HAL_CRC_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup CRC_Exported_Functions CRC Exported Functions
* @{
*/
/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions
* @brief Initialization and Configuration functions.
*
@verbatim
===============================================================================
##### Initialization and de-initialization functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Initialize the CRC according to the specified parameters
in the CRC_InitTypeDef and create the associated handle
(+) DeInitialize the CRC peripheral
(+) Initialize the CRC MSP (MCU Specific Package)
(+) DeInitialize the CRC MSP
@endverbatim
* @{
*/
/**
* @brief Initialize the CRC according to the specified
* parameters in the CRC_InitTypeDef and create the associated handle.
* @param hcrc CRC handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc)
{
/* Check the CRC handle allocation */
if (hcrc == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));
if (hcrc->State == HAL_CRC_STATE_RESET)
{
/* Allocate lock resource and initialize it */
hcrc->Lock = HAL_UNLOCKED;
/* Init the low level hardware */
HAL_CRC_MspInit(hcrc);
}
/* Change CRC peripheral state */
hcrc->State = HAL_CRC_STATE_READY;
/* Return function status */
return HAL_OK;
}
/**
* @brief DeInitialize the CRC peripheral.
* @param hcrc CRC handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc)
{
/* Check the CRC handle allocation */
if (hcrc == NULL)
{
return HAL_ERROR;
}
/* Check the parameters */
assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));
/* Check the CRC peripheral state */
if (hcrc->State == HAL_CRC_STATE_BUSY)
{
return HAL_BUSY;
}
/* Change CRC peripheral state */
hcrc->State = HAL_CRC_STATE_BUSY;
/* Reset CRC calculation unit */
__HAL_CRC_DR_RESET(hcrc);
/* Reset IDR register content */
CLEAR_BIT(hcrc->Instance->IDR, CRC_IDR_IDR);
/* DeInit the low level hardware */
HAL_CRC_MspDeInit(hcrc);
/* Change CRC peripheral state */
hcrc->State = HAL_CRC_STATE_RESET;
/* Process unlocked */
__HAL_UNLOCK(hcrc);
/* Return function status */
return HAL_OK;
}
/**
* @brief Initializes the CRC MSP.
* @param hcrc CRC handle
* @retval None
*/
__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hcrc);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_CRC_MspInit can be implemented in the user file
*/
}
/**
* @brief DeInitialize the CRC MSP.
* @param hcrc CRC handle
* @retval None
*/
__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc)
{
/* Prevent unused argument(s) compilation warning */
UNUSED(hcrc);
/* NOTE : This function should not be modified, when the callback is needed,
the HAL_CRC_MspDeInit can be implemented in the user file
*/
}
/**
* @}
*/
/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions
* @brief management functions.
*
@verbatim
===============================================================================
##### Peripheral Control functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) compute the 32-bit CRC value of a 32-bit data buffer
using combination of the previous CRC value and the new one.
[..] or
(+) compute the 32-bit CRC value of a 32-bit data buffer
independently of the previous CRC value.
@endverbatim
* @{
*/
/**
* @brief Compute the 32-bit CRC value of a 32-bit data buffer
* starting with the previously computed CRC as initialization value.
* @param hcrc CRC handle
* @param pBuffer pointer to the input data buffer.
* @param BufferLength input data buffer length (number of uint32_t words).
* @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits)
*/
uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)
{
uint32_t index; /* CRC input data buffer index */
uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */
/* Change CRC peripheral state */
hcrc->State = HAL_CRC_STATE_BUSY;
/* Enter Data to the CRC calculator */
for (index = 0U; index < BufferLength; index++)
{
hcrc->Instance->DR = pBuffer[index];
}
temp = hcrc->Instance->DR;
/* Change CRC peripheral state */
hcrc->State = HAL_CRC_STATE_READY;
/* Return the CRC computed value */
return temp;
}
/**
* @brief Compute the 32-bit CRC value of a 32-bit data buffer
* starting with hcrc->Instance->INIT as initialization value.
* @param hcrc CRC handle
* @param pBuffer pointer to the input data buffer.
* @param BufferLength input data buffer length (number of uint32_t words).
* @retval uint32_t CRC (returned value LSBs for CRC shorter than 32 bits)
*/
uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)
{
uint32_t index; /* CRC input data buffer index */
uint32_t temp = 0U; /* CRC output (read from hcrc->Instance->DR register) */
/* Change CRC peripheral state */
hcrc->State = HAL_CRC_STATE_BUSY;
/* Reset CRC Calculation Unit (hcrc->Instance->INIT is
* written in hcrc->Instance->DR) */
__HAL_CRC_DR_RESET(hcrc);
/* Enter 32-bit input data to the CRC calculator */
for (index = 0U; index < BufferLength; index++)
{
hcrc->Instance->DR = pBuffer[index];
}
temp = hcrc->Instance->DR;
/* Change CRC peripheral state */
hcrc->State = HAL_CRC_STATE_READY;
/* Return the CRC computed value */
return temp;
}
/**
* @}
*/
/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions
* @brief Peripheral State functions.
*
@verbatim
===============================================================================
##### Peripheral State functions #####
===============================================================================
[..]
This subsection permits to get in run-time the status of the peripheral.
@endverbatim
* @{
*/
/**
* @brief Return the CRC handle state.
* @param hcrc CRC handle
* @retval HAL state
*/
HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc)
{
/* Return CRC handle state */
return hcrc->State;
}
/**
* @}
*/
/**
* @}
*/
#endif /* HAL_CRC_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/