| /** |
| ****************************************************************************** |
| * @file stm32f4xx_hal_cec.h |
| * @author MCD Application Team |
| * @brief Header file of CEC HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2016 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32F4xx_HAL_CEC_H |
| #define STM32F4xx_HAL_CEC_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f4xx_hal_def.h" |
| |
| #if defined (CEC) |
| |
| /** @addtogroup STM32F4xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup CEC |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup CEC_Exported_Types CEC Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief CEC Init Structure definition |
| */ |
| typedef struct |
| { |
| uint32_t SignalFreeTime; /*!< Set SFT field, specifies the Signal Free Time. |
| It can be one of CEC_Signal_Free_Time |
| and belongs to the set {0,...,7} where |
| 0x0 is the default configuration |
| else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */ |
| |
| uint32_t Tolerance; /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms, |
| it can be a value of CEC_Tolerance : |
| it is either CEC_STANDARD_TOLERANCE or CEC_EXTENDED_TOLERANCE */ |
| |
| uint32_t BRERxStop; /*!< Set BRESTP bit CEC_BRERxStop : specifies whether or not a Bit Rising |
| Error stops the reception. |
| CEC_NO_RX_STOP_ON_BRE: reception is not stopped. |
| CEC_RX_STOP_ON_BRE: reception is stopped. */ |
| |
| uint32_t BREErrorBitGen; /*!< Set BREGEN bit CEC_BREErrorBitGen : specifies whether or not an |
| Error-Bit is generated on the |
| CEC line upon Bit Rising Error detection. |
| CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation. |
| CEC_BRE_ERRORBIT_GENERATION: error-bit generation if BRESTP is set. */ |
| |
| uint32_t LBPEErrorBitGen; /*!< Set LBPEGEN bit CEC_LBPEErrorBitGen : specifies whether or not an |
| Error-Bit is generated on the |
| CEC line upon Long Bit Period Error detection. |
| CEC_LBPE_ERRORBIT_NO_GENERATION: no error-bit generation. |
| CEC_LBPE_ERRORBIT_GENERATION: error-bit generation. */ |
| |
| uint32_t BroadcastMsgNoErrorBitGen; /*!< Set BRDNOGEN bit CEC_BroadCastMsgErrorBitGen : allows to avoid an |
| Error-Bit generation on the CEC line |
| upon an error detected on a broadcast message. |
| |
| It supersedes BREGEN and LBPEGEN bits for a broadcast message error |
| handling. It can take two values: |
| |
| 1) CEC_BROADCASTERROR_ERRORBIT_GENERATION. |
| a) BRE detection: error-bit generation on the CEC line if |
| BRESTP=CEC_RX_STOP_ON_BRE and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION. |
| b) LBPE detection: error-bit generation on the CEC line |
| if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION. |
| |
| 2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION. |
| no error-bit generation in case neither a) nor b) are satisfied. |
| Additionally, there is no error-bit generation in case of Short Bit |
| Period Error detection in a broadcast message while LSTN bit is set. */ |
| |
| uint32_t SignalFreeTimeOption; /*!< Set SFTOP bit CEC_SFT_Option : specifies when SFT timer starts. |
| CEC_SFT_START_ON_TXSOM SFT: timer starts when TXSOM is set by software. |
| CEC_SFT_START_ON_TX_RX_END: SFT timer starts automatically at the end |
| of message transmission/reception. */ |
| |
| uint32_t ListenMode; /*!< Set LSTN bit CEC_Listening_Mode : specifies device listening mode. |
| It can take two values: |
| |
| CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed |
| to its own address (OAR). Messages addressed to different destination |
| are ignored. |
| Broadcast messages are always received. |
| |
| CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its |
| own address (OAR) with positive acknowledge. Messages addressed to |
| different destination are received, but without interfering with the |
| CEC bus: no acknowledge sent. */ |
| |
| uint16_t OwnAddress; /*!< Own addresses configuration |
| This parameter can be a value of CEC_OWN_ADDRESS */ |
| |
| uint8_t *RxBuffer; /*!< CEC Rx buffer pointer */ |
| |
| |
| } CEC_InitTypeDef; |
| |
| /** |
| * @brief HAL CEC State definition |
| * @note HAL CEC State value is a combination of 2 different substates: gState and RxState |
| (see CEC_State_Definition). |
| * - gState contains CEC state information related to global Handle management |
| * and also information related to Tx operations. |
| * gState value coding follow below described bitmap : |
| * b7 (not used) |
| * x : Should be set to 0 |
| * b6 Error information |
| * 0 : No Error |
| * 1 : Error |
| * b5 CEC peripheral initialization status |
| * 0 : Reset (peripheral not initialized) |
| * 1 : Init done (peripheral initialized. HAL CEC Init function already called) |
| * b4-b3 (not used) |
| * xx : Should be set to 00 |
| * b2 Intrinsic process state |
| * 0 : Ready |
| * 1 : Busy (peripheral busy with some configuration or internal operations) |
| * b1 (not used) |
| * x : Should be set to 0 |
| * b0 Tx state |
| * 0 : Ready (no Tx operation ongoing) |
| * 1 : Busy (Tx operation ongoing) |
| * - RxState contains information related to Rx operations. |
| * RxState value coding follow below described bitmap : |
| * b7-b6 (not used) |
| * xx : Should be set to 00 |
| * b5 CEC peripheral initialization status |
| * 0 : Reset (peripheral not initialized) |
| * 1 : Init done (peripheral initialized) |
| * b4-b2 (not used) |
| * xxx : Should be set to 000 |
| * b1 Rx state |
| * 0 : Ready (no Rx operation ongoing) |
| * 1 : Busy (Rx operation ongoing) |
| * b0 (not used) |
| * x : Should be set to 0. |
| */ |
| typedef uint32_t HAL_CEC_StateTypeDef; |
| |
| /** |
| * @brief CEC handle Structure definition |
| */ |
| #if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) |
| typedef struct __CEC_HandleTypeDef |
| #else |
| typedef struct |
| #endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ |
| { |
| CEC_TypeDef *Instance; /*!< CEC registers base address */ |
| |
| CEC_InitTypeDef Init; /*!< CEC communication parameters */ |
| |
| const uint8_t *pTxBuffPtr; /*!< Pointer to CEC Tx transfer Buffer */ |
| |
| uint16_t TxXferCount; /*!< CEC Tx Transfer Counter */ |
| |
| uint16_t RxXferSize; /*!< CEC Rx Transfer size, 0: header received only */ |
| |
| HAL_LockTypeDef Lock; /*!< Locking object */ |
| |
| HAL_CEC_StateTypeDef gState; /*!< CEC state information related to global Handle management |
| and also related to Tx operations. |
| This parameter can be a value of HAL_CEC_StateTypeDef */ |
| |
| HAL_CEC_StateTypeDef RxState; /*!< CEC state information related to Rx operations. |
| This parameter can be a value of HAL_CEC_StateTypeDef */ |
| |
| uint32_t ErrorCode; /*!< For errors handling purposes, copy of ISR register |
| in case error is reported */ |
| |
| #if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) |
| void (* TxCpltCallback)(struct __CEC_HandleTypeDef |
| *hcec); /*!< CEC Tx Transfer completed callback */ |
| void (* RxCpltCallback)(struct __CEC_HandleTypeDef *hcec, |
| uint32_t RxFrameSize); /*!< CEC Rx Transfer completed callback */ |
| void (* ErrorCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC error callback */ |
| |
| void (* MspInitCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC Msp Init callback */ |
| void (* MspDeInitCallback)(struct __CEC_HandleTypeDef *hcec); /*!< CEC Msp DeInit callback */ |
| |
| #endif /* (USE_HAL_CEC_REGISTER_CALLBACKS) */ |
| } CEC_HandleTypeDef; |
| |
| #if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) |
| /** |
| * @brief HAL CEC Callback ID enumeration definition |
| */ |
| typedef enum |
| { |
| HAL_CEC_TX_CPLT_CB_ID = 0x00U, /*!< CEC Tx Transfer completed callback ID */ |
| HAL_CEC_RX_CPLT_CB_ID = 0x01U, /*!< CEC Rx Transfer completed callback ID */ |
| HAL_CEC_ERROR_CB_ID = 0x02U, /*!< CEC error callback ID */ |
| HAL_CEC_MSPINIT_CB_ID = 0x03U, /*!< CEC Msp Init callback ID */ |
| HAL_CEC_MSPDEINIT_CB_ID = 0x04U /*!< CEC Msp DeInit callback ID */ |
| } HAL_CEC_CallbackIDTypeDef; |
| |
| /** |
| * @brief HAL CEC Callback pointer definition |
| */ |
| typedef void (*pCEC_CallbackTypeDef)(CEC_HandleTypeDef *hcec); /*!< pointer to an CEC callback function */ |
| typedef void (*pCEC_RxCallbackTypeDef)(CEC_HandleTypeDef *hcec, |
| uint32_t RxFrameSize); /*!< pointer to an Rx Transfer completed |
| callback function */ |
| #endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ |
| /** |
| * @} |
| */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup CEC_Exported_Constants CEC Exported Constants |
| * @{ |
| */ |
| /** @defgroup CEC_State_Definition CEC State Code Definition |
| * @{ |
| */ |
| #define HAL_CEC_STATE_RESET ((uint32_t)0x00000000) /*!< Peripheral is not yet Initialized |
| Value is allowed for gState and RxState */ |
| #define HAL_CEC_STATE_READY ((uint32_t)0x00000020) /*!< Peripheral Initialized and ready for use |
| Value is allowed for gState and RxState */ |
| #define HAL_CEC_STATE_BUSY ((uint32_t)0x00000024) /*!< an internal process is ongoing |
| Value is allowed for gState only */ |
| #define HAL_CEC_STATE_BUSY_RX ((uint32_t)0x00000022) /*!< Data Reception process is ongoing |
| Value is allowed for RxState only */ |
| #define HAL_CEC_STATE_BUSY_TX ((uint32_t)0x00000021) /*!< Data Transmission process is ongoing |
| Value is allowed for gState only */ |
| #define HAL_CEC_STATE_BUSY_RX_TX ((uint32_t)0x00000023) /*!< an internal process is ongoing |
| Value is allowed for gState only */ |
| #define HAL_CEC_STATE_ERROR ((uint32_t)0x00000050) /*!< Error Value is allowed for gState only */ |
| /** |
| * @} |
| */ |
| /** @defgroup CEC_Error_Code CEC Error Code |
| * @{ |
| */ |
| #define HAL_CEC_ERROR_NONE (uint32_t) 0x0000U /*!< no error */ |
| #define HAL_CEC_ERROR_RXOVR CEC_ISR_RXOVR /*!< CEC Rx-Overrun */ |
| #define HAL_CEC_ERROR_BRE CEC_ISR_BRE /*!< CEC Rx Bit Rising Error */ |
| #define HAL_CEC_ERROR_SBPE CEC_ISR_SBPE /*!< CEC Rx Short Bit period Error */ |
| #define HAL_CEC_ERROR_LBPE CEC_ISR_LBPE /*!< CEC Rx Long Bit period Error */ |
| #define HAL_CEC_ERROR_RXACKE CEC_ISR_RXACKE /*!< CEC Rx Missing Acknowledge */ |
| #define HAL_CEC_ERROR_ARBLST CEC_ISR_ARBLST /*!< CEC Arbitration Lost */ |
| #define HAL_CEC_ERROR_TXUDR CEC_ISR_TXUDR /*!< CEC Tx-Buffer Underrun */ |
| #define HAL_CEC_ERROR_TXERR CEC_ISR_TXERR /*!< CEC Tx-Error */ |
| #define HAL_CEC_ERROR_TXACKE CEC_ISR_TXACKE /*!< CEC Tx Missing Acknowledge */ |
| #if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) |
| #define HAL_CEC_ERROR_INVALID_CALLBACK ((uint32_t)0x00002000U) /*!< Invalid Callback Error */ |
| #endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_Signal_Free_Time CEC Signal Free Time setting parameter |
| * @{ |
| */ |
| #define CEC_DEFAULT_SFT ((uint32_t)0x00000000U) |
| #define CEC_0_5_BITPERIOD_SFT ((uint32_t)0x00000001U) |
| #define CEC_1_5_BITPERIOD_SFT ((uint32_t)0x00000002U) |
| #define CEC_2_5_BITPERIOD_SFT ((uint32_t)0x00000003U) |
| #define CEC_3_5_BITPERIOD_SFT ((uint32_t)0x00000004U) |
| #define CEC_4_5_BITPERIOD_SFT ((uint32_t)0x00000005U) |
| #define CEC_5_5_BITPERIOD_SFT ((uint32_t)0x00000006U) |
| #define CEC_6_5_BITPERIOD_SFT ((uint32_t)0x00000007U) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_Tolerance CEC Receiver Tolerance |
| * @{ |
| */ |
| #define CEC_STANDARD_TOLERANCE ((uint32_t)0x00000000U) |
| #define CEC_EXTENDED_TOLERANCE ((uint32_t)CEC_CFGR_RXTOL) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_BRERxStop CEC Reception Stop on Error |
| * @{ |
| */ |
| #define CEC_NO_RX_STOP_ON_BRE ((uint32_t)0x00000000U) |
| #define CEC_RX_STOP_ON_BRE ((uint32_t)CEC_CFGR_BRESTP) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_BREErrorBitGen CEC Error Bit Generation if Bit Rise Error reported |
| * @{ |
| */ |
| #define CEC_BRE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000U) |
| #define CEC_BRE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BREGEN) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_LBPEErrorBitGen CEC Error Bit Generation if Long Bit Period Error reported |
| * @{ |
| */ |
| #define CEC_LBPE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000U) |
| #define CEC_LBPE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_LBPEGEN) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_BroadCastMsgErrorBitGen CEC Error Bit Generation on Broadcast message |
| * @{ |
| */ |
| #define CEC_BROADCASTERROR_ERRORBIT_GENERATION ((uint32_t)0x00000000U) |
| #define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BRDNOGEN) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_SFT_Option CEC Signal Free Time start option |
| * @{ |
| */ |
| #define CEC_SFT_START_ON_TXSOM ((uint32_t)0x00000000U) |
| #define CEC_SFT_START_ON_TX_RX_END ((uint32_t)CEC_CFGR_SFTOPT) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_Listening_Mode CEC Listening mode option |
| * @{ |
| */ |
| #define CEC_REDUCED_LISTENING_MODE ((uint32_t)0x00000000U) |
| #define CEC_FULL_LISTENING_MODE ((uint32_t)CEC_CFGR_LSTN) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_OAR_Position CEC Device Own Address position in CEC CFGR register |
| * @{ |
| */ |
| #define CEC_CFGR_OAR_LSB_POS ((uint32_t) 16U) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_Initiator_Position CEC Initiator logical address position in message header |
| * @{ |
| */ |
| #define CEC_INITIATOR_LSB_POS ((uint32_t) 4U) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_OWN_ADDRESS CEC Own Address |
| * @{ |
| */ |
| #define CEC_OWN_ADDRESS_NONE ((uint16_t) 0x0000U) /* Reset value */ |
| #define CEC_OWN_ADDRESS_0 ((uint16_t) 0x0001U) /* Logical Address 0 */ |
| #define CEC_OWN_ADDRESS_1 ((uint16_t) 0x0002U) /* Logical Address 1 */ |
| #define CEC_OWN_ADDRESS_2 ((uint16_t) 0x0004U) /* Logical Address 2 */ |
| #define CEC_OWN_ADDRESS_3 ((uint16_t) 0x0008U) /* Logical Address 3 */ |
| #define CEC_OWN_ADDRESS_4 ((uint16_t) 0x0010U) /* Logical Address 4 */ |
| #define CEC_OWN_ADDRESS_5 ((uint16_t) 0x0020U) /* Logical Address 5 */ |
| #define CEC_OWN_ADDRESS_6 ((uint16_t) 0x0040U) /* Logical Address 6 */ |
| #define CEC_OWN_ADDRESS_7 ((uint16_t) 0x0080U) /* Logical Address 7 */ |
| #define CEC_OWN_ADDRESS_8 ((uint16_t) 0x0100U) /* Logical Address 9 */ |
| #define CEC_OWN_ADDRESS_9 ((uint16_t) 0x0200U) /* Logical Address 10 */ |
| #define CEC_OWN_ADDRESS_10 ((uint16_t) 0x0400U) /* Logical Address 11 */ |
| #define CEC_OWN_ADDRESS_11 ((uint16_t) 0x0800U) /* Logical Address 12 */ |
| #define CEC_OWN_ADDRESS_12 ((uint16_t) 0x1000U) /* Logical Address 13 */ |
| #define CEC_OWN_ADDRESS_13 ((uint16_t) 0x2000U) /* Logical Address 14 */ |
| #define CEC_OWN_ADDRESS_14 ((uint16_t) 0x4000U) /* Logical Address 15 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_Interrupts_Definitions CEC Interrupts definition |
| * @{ |
| */ |
| #define CEC_IT_TXACKE CEC_IER_TXACKEIE |
| #define CEC_IT_TXERR CEC_IER_TXERRIE |
| #define CEC_IT_TXUDR CEC_IER_TXUDRIE |
| #define CEC_IT_TXEND CEC_IER_TXENDIE |
| #define CEC_IT_TXBR CEC_IER_TXBRIE |
| #define CEC_IT_ARBLST CEC_IER_ARBLSTIE |
| #define CEC_IT_RXACKE CEC_IER_RXACKEIE |
| #define CEC_IT_LBPE CEC_IER_LBPEIE |
| #define CEC_IT_SBPE CEC_IER_SBPEIE |
| #define CEC_IT_BRE CEC_IER_BREIE |
| #define CEC_IT_RXOVR CEC_IER_RXOVRIE |
| #define CEC_IT_RXEND CEC_IER_RXENDIE |
| #define CEC_IT_RXBR CEC_IER_RXBRIE |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_Flags_Definitions CEC Flags definition |
| * @{ |
| */ |
| #define CEC_FLAG_TXACKE CEC_ISR_TXACKE |
| #define CEC_FLAG_TXERR CEC_ISR_TXERR |
| #define CEC_FLAG_TXUDR CEC_ISR_TXUDR |
| #define CEC_FLAG_TXEND CEC_ISR_TXEND |
| #define CEC_FLAG_TXBR CEC_ISR_TXBR |
| #define CEC_FLAG_ARBLST CEC_ISR_ARBLST |
| #define CEC_FLAG_RXACKE CEC_ISR_RXACKE |
| #define CEC_FLAG_LBPE CEC_ISR_LBPE |
| #define CEC_FLAG_SBPE CEC_ISR_SBPE |
| #define CEC_FLAG_BRE CEC_ISR_BRE |
| #define CEC_FLAG_RXOVR CEC_ISR_RXOVR |
| #define CEC_FLAG_RXEND CEC_ISR_RXEND |
| #define CEC_FLAG_RXBR CEC_ISR_RXBR |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_ALL_ERROR CEC all RX or TX errors flags |
| * @{ |
| */ |
| #define CEC_ISR_ALL_ERROR ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\ |
| CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_IER_ALL_RX CEC all RX errors interrupts enabling flag |
| * @{ |
| */ |
| #define CEC_IER_RX_ALL_ERR ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup CEC_IER_ALL_TX CEC all TX errors interrupts enabling flag |
| * @{ |
| */ |
| #define CEC_IER_TX_ALL_ERR ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE) |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| /** @defgroup CEC_Exported_Macros CEC Exported Macros |
| * @{ |
| */ |
| |
| /** @brief Reset CEC handle gstate & RxState |
| * @param __HANDLE__ CEC handle. |
| * @retval None |
| */ |
| #if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) |
| #define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \ |
| (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \ |
| (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \ |
| (__HANDLE__)->MspInitCallback = NULL; \ |
| (__HANDLE__)->MspDeInitCallback = NULL; \ |
| } while(0) |
| #else |
| #define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) do{ \ |
| (__HANDLE__)->gState = HAL_CEC_STATE_RESET; \ |
| (__HANDLE__)->RxState = HAL_CEC_STATE_RESET; \ |
| } while(0) |
| #endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ |
| /** @brief Checks whether or not the specified CEC interrupt flag is set. |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @param __FLAG__ specifies the flag to check. |
| * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error |
| * @arg CEC_FLAG_TXERR: Tx Error. |
| * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun. |
| * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte). |
| * @arg CEC_FLAG_TXBR: Tx-Byte Request. |
| * @arg CEC_FLAG_ARBLST: Arbitration Lost |
| * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge |
| * @arg CEC_FLAG_LBPE: Rx Long period Error |
| * @arg CEC_FLAG_SBPE: Rx Short period Error |
| * @arg CEC_FLAG_BRE: Rx Bit Rising Error |
| * @arg CEC_FLAG_RXOVR: Rx Overrun. |
| * @arg CEC_FLAG_RXEND: End Of Reception. |
| * @arg CEC_FLAG_RXBR: Rx-Byte Received. |
| * @retval ITStatus |
| */ |
| #define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__)) |
| |
| /** @brief Clears the interrupt or status flag when raised (write at 1) |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @param __FLAG__ specifies the interrupt/status flag to clear. |
| * This parameter can be one of the following values: |
| * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error |
| * @arg CEC_FLAG_TXERR: Tx Error. |
| * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun. |
| * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte). |
| * @arg CEC_FLAG_TXBR: Tx-Byte Request. |
| * @arg CEC_FLAG_ARBLST: Arbitration Lost |
| * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge |
| * @arg CEC_FLAG_LBPE: Rx Long period Error |
| * @arg CEC_FLAG_SBPE: Rx Short period Error |
| * @arg CEC_FLAG_BRE: Rx Bit Rising Error |
| * @arg CEC_FLAG_RXOVR: Rx Overrun. |
| * @arg CEC_FLAG_RXEND: End Of Reception. |
| * @arg CEC_FLAG_RXBR: Rx-Byte Received. |
| * @retval none |
| */ |
| #define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR |= (__FLAG__)) |
| |
| /** @brief Enables the specified CEC interrupt. |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @param __INTERRUPT__ specifies the CEC interrupt to enable. |
| * This parameter can be one of the following values: |
| * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable |
| * @arg CEC_IT_TXERR: Tx Error IT Enable |
| * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable |
| * @arg CEC_IT_TXEND: End of transmission IT Enable |
| * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable |
| * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable |
| * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable |
| * @arg CEC_IT_LBPE: Rx Long period Error IT Enable |
| * @arg CEC_IT_SBPE: Rx Short period Error IT Enable |
| * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable |
| * @arg CEC_IT_RXOVR: Rx Overrun IT Enable |
| * @arg CEC_IT_RXEND: End Of Reception IT Enable |
| * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable |
| * @retval none |
| */ |
| #define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) |
| |
| /** @brief Disables the specified CEC interrupt. |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @param __INTERRUPT__ specifies the CEC interrupt to disable. |
| * This parameter can be one of the following values: |
| * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable |
| * @arg CEC_IT_TXERR: Tx Error IT Enable |
| * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable |
| * @arg CEC_IT_TXEND: End of transmission IT Enable |
| * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable |
| * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable |
| * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable |
| * @arg CEC_IT_LBPE: Rx Long period Error IT Enable |
| * @arg CEC_IT_SBPE: Rx Short period Error IT Enable |
| * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable |
| * @arg CEC_IT_RXOVR: Rx Overrun IT Enable |
| * @arg CEC_IT_RXEND: End Of Reception IT Enable |
| * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable |
| * @retval none |
| */ |
| #define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__))) |
| |
| /** @brief Checks whether or not the specified CEC interrupt is enabled. |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @param __INTERRUPT__ specifies the CEC interrupt to check. |
| * This parameter can be one of the following values: |
| * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable |
| * @arg CEC_IT_TXERR: Tx Error IT Enable |
| * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable |
| * @arg CEC_IT_TXEND: End of transmission IT Enable |
| * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable |
| * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable |
| * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable |
| * @arg CEC_IT_LBPE: Rx Long period Error IT Enable |
| * @arg CEC_IT_SBPE: Rx Short period Error IT Enable |
| * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable |
| * @arg CEC_IT_RXOVR: Rx Overrun IT Enable |
| * @arg CEC_IT_RXEND: End Of Reception IT Enable |
| * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable |
| * @retval FlagStatus |
| */ |
| #define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__)) |
| |
| /** @brief Enables the CEC device |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @retval none |
| */ |
| #define __HAL_CEC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_CECEN) |
| |
| /** @brief Disables the CEC device |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @retval none |
| */ |
| #define __HAL_CEC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CEC_CR_CECEN) |
| |
| /** @brief Set Transmission Start flag |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @retval none |
| */ |
| #define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXSOM) |
| |
| /** @brief Set Transmission End flag |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @retval none |
| * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM. |
| */ |
| #define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXEOM) |
| |
| /** @brief Get Transmission Start flag |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @retval FlagStatus |
| */ |
| #define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM) |
| |
| /** @brief Get Transmission End flag |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @retval FlagStatus |
| */ |
| #define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM) |
| |
| /** @brief Clear OAR register |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @retval none |
| */ |
| #define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR) |
| |
| /** @brief Set OAR register (without resetting previously set address in case of multi-address mode) |
| * To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand |
| * @param __HANDLE__ specifies the CEC Handle. |
| * @param __ADDRESS__ Own Address value (CEC logical address is identified by bit position) |
| * @retval none |
| */ |
| #define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) SET_BIT((__HANDLE__)->Instance->CFGR, \ |
| (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS) |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup CEC_Exported_Functions |
| * @{ |
| */ |
| |
| /** @addtogroup CEC_Exported_Functions_Group1 |
| * @{ |
| */ |
| /* Initialization and de-initialization functions ****************************/ |
| HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec); |
| HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec); |
| HAL_StatusTypeDef HAL_CEC_SetDeviceAddress(CEC_HandleTypeDef *hcec, uint16_t CEC_OwnAddress); |
| void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec); |
| void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec); |
| |
| #if (USE_HAL_CEC_REGISTER_CALLBACKS == 1) |
| HAL_StatusTypeDef HAL_CEC_RegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID, |
| pCEC_CallbackTypeDef pCallback); |
| HAL_StatusTypeDef HAL_CEC_UnRegisterCallback(CEC_HandleTypeDef *hcec, HAL_CEC_CallbackIDTypeDef CallbackID); |
| |
| HAL_StatusTypeDef HAL_CEC_RegisterRxCpltCallback(CEC_HandleTypeDef *hcec, pCEC_RxCallbackTypeDef pCallback); |
| HAL_StatusTypeDef HAL_CEC_UnRegisterRxCpltCallback(CEC_HandleTypeDef *hcec); |
| #endif /* USE_HAL_CEC_REGISTER_CALLBACKS */ |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup CEC_Exported_Functions_Group2 |
| * @{ |
| */ |
| /* I/O operation functions ***************************************************/ |
| HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t InitiatorAddress, uint8_t DestinationAddress, |
| const uint8_t *pData, uint32_t Size); |
| uint32_t HAL_CEC_GetLastReceivedFrameSize(const CEC_HandleTypeDef *hcec); |
| void HAL_CEC_ChangeRxBuffer(CEC_HandleTypeDef *hcec, uint8_t *Rxbuffer); |
| void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec); |
| void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec); |
| void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec, uint32_t RxFrameSize); |
| void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup CEC_Exported_Functions_Group3 |
| * @{ |
| */ |
| /* Peripheral State functions ************************************************/ |
| HAL_CEC_StateTypeDef HAL_CEC_GetState(const CEC_HandleTypeDef *hcec); |
| uint32_t HAL_CEC_GetError(const CEC_HandleTypeDef *hcec); |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /** @defgroup CEC_Private_Types CEC Private Types |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private variables ---------------------------------------------------------*/ |
| /** @defgroup CEC_Private_Variables CEC Private Variables |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup CEC_Private_Constants CEC Private Constants |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup CEC_Private_Macros CEC Private Macros |
| * @{ |
| */ |
| |
| #define IS_CEC_SIGNALFREETIME(__SFT__) ((__SFT__) <= CEC_CFGR_SFT) |
| |
| #define IS_CEC_TOLERANCE(__RXTOL__) (((__RXTOL__) == CEC_STANDARD_TOLERANCE) || \ |
| ((__RXTOL__) == CEC_EXTENDED_TOLERANCE)) |
| |
| #define IS_CEC_BRERXSTOP(__BRERXSTOP__) (((__BRERXSTOP__) == CEC_NO_RX_STOP_ON_BRE) || \ |
| ((__BRERXSTOP__) == CEC_RX_STOP_ON_BRE)) |
| |
| #define IS_CEC_BREERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_NO_GENERATION) || \ |
| ((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_GENERATION)) |
| |
| #define IS_CEC_LBPEERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \ |
| ((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_GENERATION)) |
| |
| #define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(__ERRORBITGEN__) \ |
| (((__ERRORBITGEN__) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \ |
| ((__ERRORBITGEN__) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION)) |
| |
| #define IS_CEC_SFTOP(__SFTOP__) (((__SFTOP__) == CEC_SFT_START_ON_TXSOM) || \ |
| ((__SFTOP__) == CEC_SFT_START_ON_TX_RX_END)) |
| |
| #define IS_CEC_LISTENING_MODE(__MODE__) (((__MODE__) == CEC_REDUCED_LISTENING_MODE) || \ |
| ((__MODE__) == CEC_FULL_LISTENING_MODE)) |
| |
| /** @brief Check CEC message size. |
| * The message size is the payload size: without counting the header, |
| * it varies from 0 byte (ping operation, one header only, no payload) to |
| * 15 bytes (1 opcode and up to 14 operands following the header). |
| * @param __SIZE__ CEC message size. |
| * @retval Test result (TRUE or FALSE). |
| */ |
| #define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0x10U) |
| |
| /** @brief Check CEC device Own Address Register (OAR) setting. |
| * OAR address is written in a 15-bit field within CEC_CFGR register. |
| * @param __ADDRESS__ CEC own address. |
| * @retval Test result (TRUE or FALSE). |
| */ |
| #define IS_CEC_OWN_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x7FFFU) |
| |
| /** @brief Check CEC initiator or destination logical address setting. |
| * Initiator and destination addresses are coded over 4 bits. |
| * @param __ADDRESS__ CEC initiator or logical address. |
| * @retval Test result (TRUE or FALSE). |
| */ |
| #define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xFU) |
| /** |
| * @} |
| */ |
| /* Private functions ---------------------------------------------------------*/ |
| /** @defgroup CEC_Private_Functions CEC Private Functions |
| * @{ |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* CEC */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* STM32F4xxHAL_CEC_H */ |
