| /** |
| ****************************************************************************** |
| * @file stm32f4xx_hal_spdifrx.h |
| * @author MCD Application Team |
| * @brief Header file of SPDIFRX HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2016 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file |
| * in the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef STM32F4xx_HAL_SPDIFRX_H |
| #define STM32F4xx_HAL_SPDIFRX_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f4xx_hal_def.h" |
| |
| #if defined(STM32F446xx) |
| /** @addtogroup STM32F4xx_HAL_Driver |
| * @{ |
| */ |
| #if defined (SPDIFRX) |
| |
| /** @addtogroup SPDIFRX |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup SPDIFRX_Exported_Types SPDIFRX Exported Types |
| * @{ |
| */ |
| |
| /** |
| * @brief SPDIFRX Init structure definition |
| */ |
| typedef struct |
| { |
| uint32_t InputSelection; /*!< Specifies the SPDIF input selection. |
| This parameter can be a value of @ref SPDIFRX_Input_Selection */ |
| |
| uint32_t Retries; /*!< Specifies the Maximum allowed re-tries during synchronization phase. |
| This parameter can be a value of @ref SPDIFRX_Max_Retries */ |
| |
| uint32_t WaitForActivity; /*!< Specifies the wait for activity on SPDIF selected input. |
| This parameter can be a value of @ref SPDIFRX_Wait_For_Activity. */ |
| |
| uint32_t ChannelSelection; /*!< Specifies whether the control flow will take the channel status |
| from channel A or B. |
| This parameter can be a value of @ref SPDIFRX_Channel_Selection */ |
| |
| uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...). |
| This parameter can be a value of @ref SPDIFRX_Data_Format */ |
| |
| uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode. |
| This parameter can be a value of @ref SPDIFRX_Stereo_Mode */ |
| |
| uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not |
| into the received frame. |
| This parameter can be a value of @ref SPDIFRX_PT_Mask */ |
| |
| uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not |
| into the received frame. |
| This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */ |
| |
| uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame. |
| This parameter can be a value of @ref SPDIFRX_V_Mask */ |
| |
| uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not |
| into the received frame. |
| This parameter can be a value of @ref SPDIFRX_PE_Mask */ |
| } SPDIFRX_InitTypeDef; |
| |
| /** |
| * @brief SPDIFRX SetDataFormat structure definition |
| */ |
| typedef struct |
| { |
| uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...). |
| This parameter can be a value of @ref SPDIFRX_Data_Format */ |
| |
| uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode. |
| This parameter can be a value of @ref SPDIFRX_Stereo_Mode */ |
| |
| uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not |
| into the received frame. |
| This parameter can be a value of @ref SPDIFRX_PT_Mask */ |
| |
| uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not |
| into the received frame. |
| This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */ |
| |
| uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame. |
| This parameter can be a value of @ref SPDIFRX_V_Mask */ |
| |
| uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not |
| into the received frame. |
| This parameter can be a value of @ref SPDIFRX_PE_Mask */ |
| |
| } SPDIFRX_SetDataFormatTypeDef; |
| |
| /** |
| * @brief HAL State structures definition |
| */ |
| typedef enum |
| { |
| HAL_SPDIFRX_STATE_RESET = 0x00U, /*!< SPDIFRX not yet initialized or disabled */ |
| HAL_SPDIFRX_STATE_READY = 0x01U, /*!< SPDIFRX initialized and ready for use */ |
| HAL_SPDIFRX_STATE_BUSY = 0x02U, /*!< SPDIFRX internal process is ongoing */ |
| HAL_SPDIFRX_STATE_BUSY_RX = 0x03U, /*!< SPDIFRX internal Data Flow RX process is ongoing */ |
| HAL_SPDIFRX_STATE_BUSY_CX = 0x04U, /*!< SPDIFRX internal Control Flow RX process is ongoing */ |
| HAL_SPDIFRX_STATE_ERROR = 0x07U /*!< SPDIFRX error state */ |
| } HAL_SPDIFRX_StateTypeDef; |
| |
| /** |
| * @brief SPDIFRX handle Structure definition |
| */ |
| #if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) |
| typedef struct __SPDIFRX_HandleTypeDef |
| #else |
| typedef struct |
| #endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ |
| { |
| SPDIFRX_TypeDef *Instance; /* SPDIFRX registers base address */ |
| |
| SPDIFRX_InitTypeDef Init; /* SPDIFRX communication parameters */ |
| |
| uint32_t *pRxBuffPtr; /* Pointer to SPDIFRX Rx transfer buffer */ |
| |
| uint32_t *pCsBuffPtr; /* Pointer to SPDIFRX Cx transfer buffer */ |
| |
| __IO uint16_t RxXferSize; /* SPDIFRX Rx transfer size */ |
| |
| __IO uint16_t RxXferCount; /* SPDIFRX Rx transfer counter |
| (This field is initialized at the |
| same value as transfer size at the |
| beginning of the transfer and |
| decremented when a sample is received. |
| NbSamplesReceived = RxBufferSize-RxBufferCount) */ |
| |
| __IO uint16_t CsXferSize; /* SPDIFRX Rx transfer size */ |
| |
| __IO uint16_t CsXferCount; /* SPDIFRX Rx transfer counter |
| (This field is initialized at the |
| same value as transfer size at the |
| beginning of the transfer and |
| decremented when a sample is received. |
| NbSamplesReceived = RxBufferSize-RxBufferCount) */ |
| |
| DMA_HandleTypeDef *hdmaCsRx; /* SPDIFRX EC60958_channel_status and user_information |
| DMA handle parameters */ |
| |
| DMA_HandleTypeDef *hdmaDrRx; /* SPDIFRX Rx DMA handle parameters */ |
| |
| __IO HAL_LockTypeDef Lock; /* SPDIFRX locking object */ |
| |
| __IO HAL_SPDIFRX_StateTypeDef State; /* SPDIFRX communication state */ |
| |
| __IO uint32_t ErrorCode; /* SPDIFRX Error code */ |
| |
| #if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) |
| void (*RxHalfCpltCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX Data flow half completed |
| callback */ |
| void (*RxCpltCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX Data flow completed callback */ |
| void (*CxHalfCpltCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX Control flow half completed |
| callback */ |
| void (*CxCpltCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX Control flow completed callback */ |
| void (*ErrorCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX error callback */ |
| void (* MspInitCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX Msp Init callback */ |
| void (* MspDeInitCallback)(struct __SPDIFRX_HandleTypeDef *hspdif); /*!< SPDIFRX Msp DeInit callback */ |
| #endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ |
| |
| } SPDIFRX_HandleTypeDef; |
| |
| #if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) |
| /** |
| * @brief HAL SPDIFRX Callback ID enumeration definition |
| */ |
| typedef enum |
| { |
| HAL_SPDIFRX_RX_HALF_CB_ID = 0x00U, /*!< SPDIFRX Data flow half completed callback ID */ |
| HAL_SPDIFRX_RX_CPLT_CB_ID = 0x01U, /*!< SPDIFRX Data flow completed callback */ |
| HAL_SPDIFRX_CX_HALF_CB_ID = 0x02U, /*!< SPDIFRX Control flow half completed callback */ |
| HAL_SPDIFRX_CX_CPLT_CB_ID = 0x03U, /*!< SPDIFRX Control flow completed callback */ |
| HAL_SPDIFRX_ERROR_CB_ID = 0x04U, /*!< SPDIFRX error callback */ |
| HAL_SPDIFRX_MSPINIT_CB_ID = 0x05U, /*!< SPDIFRX Msp Init callback ID */ |
| HAL_SPDIFRX_MSPDEINIT_CB_ID = 0x06U /*!< SPDIFRX Msp DeInit callback ID */ |
| } HAL_SPDIFRX_CallbackIDTypeDef; |
| |
| /** |
| * @brief HAL SPDIFRX Callback pointer definition |
| */ |
| typedef void (*pSPDIFRX_CallbackTypeDef)(SPDIFRX_HandleTypeDef *hspdif); /*!< pointer to an SPDIFRX callback |
| function */ |
| #endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ |
| /** |
| * @} |
| */ |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup SPDIFRX_Exported_Constants SPDIFRX Exported Constants |
| * @{ |
| */ |
| /** @defgroup SPDIFRX_ErrorCode SPDIFRX Error Code |
| * @{ |
| */ |
| #define HAL_SPDIFRX_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ |
| #define HAL_SPDIFRX_ERROR_TIMEOUT ((uint32_t)0x00000001U) /*!< Timeout error */ |
| #define HAL_SPDIFRX_ERROR_OVR ((uint32_t)0x00000002U) /*!< OVR error */ |
| #define HAL_SPDIFRX_ERROR_PE ((uint32_t)0x00000004U) /*!< Parity error */ |
| #define HAL_SPDIFRX_ERROR_DMA ((uint32_t)0x00000008U) /*!< DMA transfer error */ |
| #define HAL_SPDIFRX_ERROR_UNKNOWN ((uint32_t)0x00000010U) /*!< Unknown Error error */ |
| #if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) |
| #define HAL_SPDIFRX_ERROR_INVALID_CALLBACK ((uint32_t)0x00000020U) /*!< Invalid Callback error */ |
| #endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SPDIFRX_Input_Selection SPDIFRX Input Selection |
| * @{ |
| */ |
| #define SPDIFRX_INPUT_IN0 ((uint32_t)0x00000000U) |
| #define SPDIFRX_INPUT_IN1 ((uint32_t)0x00010000U) |
| #define SPDIFRX_INPUT_IN2 ((uint32_t)0x00020000U) |
| #define SPDIFRX_INPUT_IN3 ((uint32_t)0x00030000U) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SPDIFRX_Max_Retries SPDIFRX Maximum Retries |
| * @{ |
| */ |
| #define SPDIFRX_MAXRETRIES_NONE ((uint32_t)0x00000000U) |
| #define SPDIFRX_MAXRETRIES_3 ((uint32_t)0x00001000U) |
| #define SPDIFRX_MAXRETRIES_15 ((uint32_t)0x00002000U) |
| #define SPDIFRX_MAXRETRIES_63 ((uint32_t)0x00003000U) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SPDIFRX_Wait_For_Activity SPDIFRX Wait For Activity |
| * @{ |
| */ |
| #define SPDIFRX_WAITFORACTIVITY_OFF ((uint32_t)0x00000000U) |
| #define SPDIFRX_WAITFORACTIVITY_ON ((uint32_t)SPDIFRX_CR_WFA) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SPDIFRX_PT_Mask SPDIFRX Preamble Type Mask |
| * @{ |
| */ |
| #define SPDIFRX_PREAMBLETYPEMASK_OFF ((uint32_t)0x00000000U) |
| #define SPDIFRX_PREAMBLETYPEMASK_ON ((uint32_t)SPDIFRX_CR_PTMSK) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SPDIFRX_ChannelStatus_Mask SPDIFRX Channel Status Mask |
| * @{ |
| */ |
| #define SPDIFRX_CHANNELSTATUS_OFF ((uint32_t)0x00000000U) /* The channel status and user bits are copied |
| into the SPDIF_DR */ |
| #define SPDIFRX_CHANNELSTATUS_ON ((uint32_t)SPDIFRX_CR_CUMSK) /* The channel status and user bits are not copied |
| into the SPDIF_DR, zeros are written instead*/ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SPDIFRX_V_Mask SPDIFRX Validity Mask |
| * @{ |
| */ |
| #define SPDIFRX_VALIDITYMASK_OFF ((uint32_t)0x00000000U) |
| #define SPDIFRX_VALIDITYMASK_ON ((uint32_t)SPDIFRX_CR_VMSK) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SPDIFRX_PE_Mask SPDIFRX Parity Error Mask |
| * @{ |
| */ |
| #define SPDIFRX_PARITYERRORMASK_OFF ((uint32_t)0x00000000U) |
| #define SPDIFRX_PARITYERRORMASK_ON ((uint32_t)SPDIFRX_CR_PMSK) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SPDIFRX_Channel_Selection SPDIFRX Channel Selection |
| * @{ |
| */ |
| #define SPDIFRX_CHANNEL_A ((uint32_t)0x00000000U) |
| #define SPDIFRX_CHANNEL_B ((uint32_t)SPDIFRX_CR_CHSEL) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SPDIFRX_Data_Format SPDIFRX Data Format |
| * @{ |
| */ |
| #define SPDIFRX_DATAFORMAT_LSB ((uint32_t)0x00000000U) |
| #define SPDIFRX_DATAFORMAT_MSB ((uint32_t)0x00000010U) |
| #define SPDIFRX_DATAFORMAT_32BITS ((uint32_t)0x00000020U) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SPDIFRX_Stereo_Mode SPDIFRX Stereo Mode |
| * @{ |
| */ |
| #define SPDIFRX_STEREOMODE_DISABLE ((uint32_t)0x00000000U) |
| #define SPDIFRX_STEREOMODE_ENABLE ((uint32_t)SPDIFRX_CR_RXSTEO) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SPDIFRX_State SPDIFRX State |
| * @{ |
| */ |
| |
| #define SPDIFRX_STATE_IDLE ((uint32_t)0xFFFFFFFCU) |
| #define SPDIFRX_STATE_SYNC ((uint32_t)0x00000001U) |
| #define SPDIFRX_STATE_RCV ((uint32_t)SPDIFRX_CR_SPDIFEN) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SPDIFRX_Interrupts_Definition SPDIFRX Interrupts Definition |
| * @{ |
| */ |
| #define SPDIFRX_IT_RXNE ((uint32_t)SPDIFRX_IMR_RXNEIE) |
| #define SPDIFRX_IT_CSRNE ((uint32_t)SPDIFRX_IMR_CSRNEIE) |
| #define SPDIFRX_IT_PERRIE ((uint32_t)SPDIFRX_IMR_PERRIE) |
| #define SPDIFRX_IT_OVRIE ((uint32_t)SPDIFRX_IMR_OVRIE) |
| #define SPDIFRX_IT_SBLKIE ((uint32_t)SPDIFRX_IMR_SBLKIE) |
| #define SPDIFRX_IT_SYNCDIE ((uint32_t)SPDIFRX_IMR_SYNCDIE) |
| #define SPDIFRX_IT_IFEIE ((uint32_t)SPDIFRX_IMR_IFEIE ) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup SPDIFRX_Flags_Definition SPDIFRX Flags Definition |
| * @{ |
| */ |
| #define SPDIFRX_FLAG_RXNE ((uint32_t)SPDIFRX_SR_RXNE) |
| #define SPDIFRX_FLAG_CSRNE ((uint32_t)SPDIFRX_SR_CSRNE) |
| #define SPDIFRX_FLAG_PERR ((uint32_t)SPDIFRX_SR_PERR) |
| #define SPDIFRX_FLAG_OVR ((uint32_t)SPDIFRX_SR_OVR) |
| #define SPDIFRX_FLAG_SBD ((uint32_t)SPDIFRX_SR_SBD) |
| #define SPDIFRX_FLAG_SYNCD ((uint32_t)SPDIFRX_SR_SYNCD) |
| #define SPDIFRX_FLAG_FERR ((uint32_t)SPDIFRX_SR_FERR) |
| #define SPDIFRX_FLAG_SERR ((uint32_t)SPDIFRX_SR_SERR) |
| #define SPDIFRX_FLAG_TERR ((uint32_t)SPDIFRX_SR_TERR) |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| /** @defgroup SPDIFRX_Exported_macros SPDIFRX Exported Macros |
| * @{ |
| */ |
| |
| /** @brief Reset SPDIFRX handle state |
| * @param __HANDLE__ SPDIFRX handle. |
| * @retval None |
| */ |
| #if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) |
| #define __HAL_SPDIFRX_RESET_HANDLE_STATE(__HANDLE__) do{\ |
| (__HANDLE__)->State = HAL_SPDIFRX_STATE_RESET;\ |
| (__HANDLE__)->MspInitCallback = NULL;\ |
| (__HANDLE__)->MspDeInitCallback = NULL;\ |
| }while(0) |
| #else |
| #define __HAL_SPDIFRX_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPDIFRX_STATE_RESET) |
| #endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ |
| |
| /** @brief Disable the specified SPDIFRX peripheral (IDLE State). |
| * @param __HANDLE__ specifies the SPDIFRX Handle. |
| * @retval None |
| */ |
| #define __HAL_SPDIFRX_IDLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= SPDIFRX_STATE_IDLE) |
| |
| /** @brief Enable the specified SPDIFRX peripheral (SYNC State). |
| * @param __HANDLE__ specifies the SPDIFRX Handle. |
| * @retval None |
| */ |
| #define __HAL_SPDIFRX_SYNC(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_SYNC) |
| |
| |
| /** @brief Enable the specified SPDIFRX peripheral (RCV State). |
| * @param __HANDLE__ specifies the SPDIFRX Handle. |
| * @retval None |
| */ |
| #define __HAL_SPDIFRX_RCV(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_RCV) |
| |
| |
| /** @brief Enable or disable the specified SPDIFRX interrupts. |
| * @param __HANDLE__ specifies the SPDIFRX Handle. |
| * @param __INTERRUPT__ specifies the interrupt source to enable or disable. |
| * This parameter can be one of the following values: |
| * @arg SPDIFRX_IT_RXNE |
| * @arg SPDIFRX_IT_CSRNE |
| * @arg SPDIFRX_IT_PERRIE |
| * @arg SPDIFRX_IT_OVRIE |
| * @arg SPDIFRX_IT_SBLKIE |
| * @arg SPDIFRX_IT_SYNCDIE |
| * @arg SPDIFRX_IT_IFEIE |
| * @retval None |
| */ |
| #define __HAL_SPDIFRX_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__)) |
| #define __HAL_SPDIFRX_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR\ |
| &= (uint16_t)(~(__INTERRUPT__))) |
| |
| /** @brief Checks if the specified SPDIFRX interrupt source is enabled or disabled. |
| * @param __HANDLE__ specifies the SPDIFRX Handle. |
| * @param __INTERRUPT__ specifies the SPDIFRX interrupt source to check. |
| * This parameter can be one of the following values: |
| * @arg SPDIFRX_IT_RXNE |
| * @arg SPDIFRX_IT_CSRNE |
| * @arg SPDIFRX_IT_PERRIE |
| * @arg SPDIFRX_IT_OVRIE |
| * @arg SPDIFRX_IT_SBLKIE |
| * @arg SPDIFRX_IT_SYNCDIE |
| * @arg SPDIFRX_IT_IFEIE |
| * @retval The new state of __IT__ (TRUE or FALSE). |
| */ |
| #define __HAL_SPDIFRX_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR\ |
| & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) |
| |
| /** @brief Checks whether the specified SPDIFRX flag is set or not. |
| * @param __HANDLE__ specifies the SPDIFRX Handle. |
| * @param __FLAG__ specifies the flag to check. |
| * This parameter can be one of the following values: |
| * @arg SPDIFRX_FLAG_RXNE |
| * @arg SPDIFRX_FLAG_CSRNE |
| * @arg SPDIFRX_FLAG_PERR |
| * @arg SPDIFRX_FLAG_OVR |
| * @arg SPDIFRX_FLAG_SBD |
| * @arg SPDIFRX_FLAG_SYNCD |
| * @arg SPDIFRX_FLAG_FERR |
| * @arg SPDIFRX_FLAG_SERR |
| * @arg SPDIFRX_FLAG_TERR |
| * @retval The new state of __FLAG__ (TRUE or FALSE). |
| */ |
| #define __HAL_SPDIFRX_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->SR)\ |
| & (__FLAG__)) == (__FLAG__)) ? SET : RESET) |
| |
| /** @brief Clears the specified SPDIFRX SR flag, in setting the proper IFCR register bit. |
| * @param __HANDLE__ specifies the USART Handle. |
| * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set |
| * to clear the corresponding interrupt |
| * This parameter can be one of the following values: |
| * @arg SPDIFRX_FLAG_PERR |
| * @arg SPDIFRX_FLAG_OVR |
| * @arg SPDIFRX_SR_SBD |
| * @arg SPDIFRX_SR_SYNCD |
| * @retval None |
| */ |
| #define __HAL_SPDIFRX_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->IFCR = (uint32_t)(__IT_CLEAR__)) |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup SPDIFRX_Exported_Functions |
| * @{ |
| */ |
| |
| /** @addtogroup SPDIFRX_Exported_Functions_Group1 |
| * @{ |
| */ |
| /* Initialization/de-initialization functions **********************************/ |
| HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif); |
| HAL_StatusTypeDef HAL_SPDIFRX_DeInit(SPDIFRX_HandleTypeDef *hspdif); |
| void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif); |
| void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif); |
| HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat); |
| |
| /* Callbacks Register/UnRegister functions ***********************************/ |
| #if (USE_HAL_SPDIFRX_REGISTER_CALLBACKS == 1) |
| HAL_StatusTypeDef HAL_SPDIFRX_RegisterCallback(SPDIFRX_HandleTypeDef *hspdif, HAL_SPDIFRX_CallbackIDTypeDef CallbackID, |
| pSPDIFRX_CallbackTypeDef pCallback); |
| HAL_StatusTypeDef HAL_SPDIFRX_UnRegisterCallback(SPDIFRX_HandleTypeDef *hspdif, |
| HAL_SPDIFRX_CallbackIDTypeDef CallbackID); |
| #endif /* USE_HAL_SPDIFRX_REGISTER_CALLBACKS */ |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup SPDIFRX_Exported_Functions_Group2 |
| * @{ |
| */ |
| /* I/O operation functions ***************************************************/ |
| /* Blocking mode: Polling */ |
| HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, |
| uint32_t Timeout); |
| HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, |
| uint32_t Timeout); |
| |
| /* Non-Blocking mode: Interrupt */ |
| HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); |
| HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); |
| void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif); |
| |
| /* Non-Blocking mode: DMA */ |
| HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); |
| HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); |
| HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif); |
| |
| /* Callbacks used in non blocking modes (Interrupt and DMA) *******************/ |
| void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif); |
| void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif); |
| void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif); |
| void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif); |
| void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif); |
| /** |
| * @} |
| */ |
| |
| /** @addtogroup SPDIFRX_Exported_Functions_Group3 |
| * @{ |
| */ |
| /* Peripheral Control and State functions ************************************/ |
| HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef const *const hspdif); |
| uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef const *const hspdif); |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private constants ---------------------------------------------------------*/ |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup SPDIFRX_Private_Macros SPDIFRX Private Macros |
| * @{ |
| */ |
| #define IS_SPDIFRX_INPUT_SELECT(INPUT) (((INPUT) == SPDIFRX_INPUT_IN1) || \ |
| ((INPUT) == SPDIFRX_INPUT_IN2) || \ |
| ((INPUT) == SPDIFRX_INPUT_IN3) || \ |
| ((INPUT) == SPDIFRX_INPUT_IN0)) |
| |
| #define IS_SPDIFRX_MAX_RETRIES(RET) (((RET) == SPDIFRX_MAXRETRIES_NONE) || \ |
| ((RET) == SPDIFRX_MAXRETRIES_3) || \ |
| ((RET) == SPDIFRX_MAXRETRIES_15) || \ |
| ((RET) == SPDIFRX_MAXRETRIES_63)) |
| |
| #define IS_SPDIFRX_WAIT_FOR_ACTIVITY(VAL) (((VAL) == SPDIFRX_WAITFORACTIVITY_ON) || \ |
| ((VAL) == SPDIFRX_WAITFORACTIVITY_OFF)) |
| |
| #define IS_PREAMBLE_TYPE_MASK(VAL) (((VAL) == SPDIFRX_PREAMBLETYPEMASK_ON) || \ |
| ((VAL) == SPDIFRX_PREAMBLETYPEMASK_OFF)) |
| |
| #define IS_VALIDITY_MASK(VAL) (((VAL) == SPDIFRX_VALIDITYMASK_OFF) || \ |
| ((VAL) == SPDIFRX_VALIDITYMASK_ON)) |
| |
| #define IS_PARITY_ERROR_MASK(VAL) (((VAL) == SPDIFRX_PARITYERRORMASK_OFF) || \ |
| ((VAL) == SPDIFRX_PARITYERRORMASK_ON)) |
| |
| #define IS_SPDIFRX_CHANNEL(CHANNEL) (((CHANNEL) == SPDIFRX_CHANNEL_A) || \ |
| ((CHANNEL) == SPDIFRX_CHANNEL_B)) |
| |
| #define IS_SPDIFRX_DATA_FORMAT(FORMAT) (((FORMAT) == SPDIFRX_DATAFORMAT_LSB) || \ |
| ((FORMAT) == SPDIFRX_DATAFORMAT_MSB) || \ |
| ((FORMAT) == SPDIFRX_DATAFORMAT_32BITS)) |
| |
| #define IS_STEREO_MODE(MODE) (((MODE) == SPDIFRX_STEREOMODE_DISABLE) || \ |
| ((MODE) == SPDIFRX_STEREOMODE_ENABLE)) |
| |
| #define IS_CHANNEL_STATUS_MASK(VAL) (((VAL) == SPDIFRX_CHANNELSTATUS_ON) || \ |
| ((VAL) == SPDIFRX_CHANNELSTATUS_OFF)) |
| |
| /** |
| * @} |
| */ |
| |
| /* Private functions ---------------------------------------------------------*/ |
| /** @defgroup SPDIFRX_Private_Functions SPDIFRX Private Functions |
| * @{ |
| */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| #endif /* SPDIFRX */ |
| /** |
| * @} |
| */ |
| #endif /* STM32F446xx */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| |
| #endif /* STM32F4xx_HAL_SPDIFRX_H */ |
