blob: 0cb02b05122e18ee349b4ff1a0c8ea0720bbcd71 [file] [log] [blame]
/**
******************************************************************************
* @file stm32f7xx_ll_system.h
* @author MCD Application Team
* @brief Header file of SYSTEM LL module.
******************************************************************************
* @attention
*
* Copyright (c) 2017 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
The LL SYSTEM driver contains a set of generic APIs that can be
used by user:
(+) Some of the FLASH features need to be handled in the SYSTEM file.
(+) Access to DBGCMU registers
(+) Access to SYSCFG registers
@endverbatim
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F7xx_LL_SYSTEM_H
#define __STM32F7xx_LL_SYSTEM_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f7xx.h"
/** @addtogroup STM32F7xx_LL_Driver
* @{
*/
#if defined (FLASH) || defined (SYSCFG) || defined (DBGMCU)
/** @defgroup SYSTEM_LL SYSTEM
* @{
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Private_Constants SYSTEM Private Constants
* @{
*/
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/* Exported types ------------------------------------------------------------*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Exported_Constants SYSTEM Exported Constants
* @{
*/
/** @defgroup SYSTEM_LL_EC_REMAP SYSCFG REMAP
* @{
*/
#define LL_SYSCFG_REMAP_BOOT0 0x00000000U /*!< Boot information after Reset */
#define LL_SYSCFG_REMAP_BOOT1 SYSCFG_MEMRMP_MEM_BOOT /*!< Boot information after Reset */
/**
* @}
*/
#if defined(SYSCFG_MEMRMP_SWP_FB)
/** @defgroup SYSTEM_LL_EC_BANKMODE SYSCFG BANK MODE
* @{
*/
#define LL_SYSCFG_BANKMODE_BANK1 0x00000000U /*!< Flash Bank 1 base address mapped at 0x0800 0000 (AXI) and 0x0020 0000 (TCM)
and Flash Bank 2 base address mapped at 0x0810 0000 (AXI) and 0x0030 0000 (TCM)*/
#define LL_SYSCFG_BANKMODE_BANK2 SYSCFG_MEMRMP_SWP_FB /*!< Flash Bank 2 base address mapped at 0x0800 0000 (AXI) and 0x0020 0000(TCM)
and Flash Bank 1 base address mapped at 0x0810 0000 (AXI) and 0x0030 0000(TCM) */
/**
* @}
*/
#endif /* SYSCFG_MEMRMP_SWP_FB */
#if defined(SYSCFG_PMC_MII_RMII_SEL)
/** @defgroup SYSTEM_LL_EC_PMC SYSCFG PMC
* @{
*/
#define LL_SYSCFG_PMC_ETHMII 0x00000000U /*!< ETH Media MII interface */
#define LL_SYSCFG_PMC_ETHRMII (uint32_t)SYSCFG_PMC_MII_RMII_SEL /*!< ETH Media RMII interface */
/**
* @}
*/
#endif /* SYSCFG_PMC_MII_RMII_SEL */
/** @defgroup SYSTEM_LL_EC_I2C_FASTMODEPLUS SYSCFG I2C FASTMODEPLUS
* @{
*/
#if defined(SYSCFG_PMC_I2C1_FMP)
#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C1 SYSCFG_PMC_I2C1_FMP /*!< Enable Fast Mode Plus for I2C1 */
#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 SYSCFG_PMC_I2C2_FMP /*!< Enable Fast Mode Plus for I2C2 */
#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C3 SYSCFG_PMC_I2C3_FMP /*!< Enable Fast Mode Plus for I2C3 */
#endif /* SYSCFG_PMC_I2C1_FMP */
#if defined(SYSCFG_PMC_I2C4_FMP)
#define LL_SYSCFG_I2C_FASTMODEPLUS_I2C4 SYSCFG_PMC_I2C4_FMP /*!< Enable Fast Mode Plus for I2C4 */
#endif /* SYSCFG_PMC_I2C4_FMP */
#if defined(SYSCFG_PMC_I2C_PB6_FMP)
#define LL_SYSCFG_I2C_FASTMODEPLUS_PB6 SYSCFG_PMC_I2C_PB6_FMP /*!< Enable Fast Mode Plus on PB6 */
#define LL_SYSCFG_I2C_FASTMODEPLUS_PB7 SYSCFG_PMC_I2C_PB7_FMP /*!< Enable Fast Mode Plus on PB7 */
#define LL_SYSCFG_I2C_FASTMODEPLUS_PB8 SYSCFG_PMC_I2C_PB8_FMP /*!< Enable Fast Mode Plus on PB8 */
#define LL_SYSCFG_I2C_FASTMODEPLUS_PB9 SYSCFG_PMC_I2C_PB9_FMP /*!< Enable Fast Mode Plus on PB9 */
#endif /* SYSCFG_PMC_I2C_PB6_FMP */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_EXTI_PORT SYSCFG EXTI PORT
* @{
*/
#define LL_SYSCFG_EXTI_PORTA 0U /*!< EXTI PORT A */
#define LL_SYSCFG_EXTI_PORTB 1U /*!< EXTI PORT B */
#define LL_SYSCFG_EXTI_PORTC 2U /*!< EXTI PORT C */
#define LL_SYSCFG_EXTI_PORTD 3U /*!< EXTI PORT D */
#define LL_SYSCFG_EXTI_PORTE 4U /*!< EXTI PORT E */
#if defined(GPIOF)
#define LL_SYSCFG_EXTI_PORTF 5U /*!< EXTI PORT F */
#endif /* GPIOF */
#if defined(GPIOG)
#define LL_SYSCFG_EXTI_PORTG 6U /*!< EXTI PORT G */
#endif /* GPIOG */
#define LL_SYSCFG_EXTI_PORTH 7U /*!< EXTI PORT H */
#if defined(GPIOI)
#define LL_SYSCFG_EXTI_PORTI 8U /*!< EXTI PORT I */
#endif /* GPIOI */
#if defined(GPIOJ)
#define LL_SYSCFG_EXTI_PORTJ 9U /*!< EXTI PORT J */
#endif /* GPIOJ */
#if defined(GPIOK)
#define LL_SYSCFG_EXTI_PORTK 10U /*!< EXTI PORT k */
#endif /* GPIOK */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_EXTI_LINE SYSCFG EXTI LINE
* @{
*/
#define LL_SYSCFG_EXTI_LINE0 (0x000FU << 16U | 0U) /*!< EXTI_POSITION_0 | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE1 (0x00F0U << 16U | 0U) /*!< EXTI_POSITION_4 | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE2 (0x0F00U << 16U | 0U) /*!< EXTI_POSITION_8 | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE3 (0xF000U << 16U | 0U) /*!< EXTI_POSITION_12 | EXTICR[0] */
#define LL_SYSCFG_EXTI_LINE4 (0x000FU << 16U | 1U) /*!< EXTI_POSITION_0 | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE5 (0x00F0U << 16U | 1U) /*!< EXTI_POSITION_4 | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE6 (0x0F00U << 16U | 1U) /*!< EXTI_POSITION_8 | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE7 (0xF000U << 16U | 1U) /*!< EXTI_POSITION_12 | EXTICR[1] */
#define LL_SYSCFG_EXTI_LINE8 (0x000FU << 16U | 2U) /*!< EXTI_POSITION_0 | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE9 (0x00F0U << 16U | 2U) /*!< EXTI_POSITION_4 | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE10 (0x0F00U << 16U | 2U) /*!< EXTI_POSITION_8 | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE11 (0xF000U << 16U | 2U) /*!< EXTI_POSITION_12 | EXTICR[2] */
#define LL_SYSCFG_EXTI_LINE12 (0x000FU << 16U | 3U) /*!< EXTI_POSITION_0 | EXTICR[3] */
#define LL_SYSCFG_EXTI_LINE13 (0x00F0U << 16U | 3U) /*!< EXTI_POSITION_4 | EXTICR[3] */
#define LL_SYSCFG_EXTI_LINE14 (0x0F00U << 16U | 3U) /*!< EXTI_POSITION_8 | EXTICR[3] */
#define LL_SYSCFG_EXTI_LINE15 (0xF000U << 16U | 3U) /*!< EXTI_POSITION_12 | EXTICR[3] */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_TIMBREAK SYSCFG TIMER BREAK
* @{
*/
#if defined(SYSCFG_CBR_CLL)
#define LL_SYSCFG_TIMBREAK_LOCKUP SYSCFG_CBR_CLL /*!< Enables and locks the Lockup output (raised during core
lockup state) of Cortex-M7 with Break Input of TIMER1, TIMER8 */
#define LL_SYSCFG_TIMBREAK_PVD SYSCFG_CBR_PVDL /*!< Enables and locks the PVD connection with TIMER1, TIMER8 Break input.
It also locks (write protect) the PVD_EN and PVDSEL[2:0] bits
of the power controller */
#endif /* SYSCFG_CBR_CLL */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_CMP_PD SYSCFG CMP PD
* @{
*/
#define LL_SYSCFG_DISABLE_CMP_PD 0x00000000U /*!< I/O compensation cell power-down mode */
#define LL_SYSCFG_ENABLE_CMP_PD SYSCFG_CMPCR_CMP_PD /*!< I/O compensation cell enabled */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_TRACE DBGMCU TRACE Pin Assignment
* @{
*/
#define LL_DBGMCU_TRACE_NONE 0x00000000U /*!< TRACE pins not assigned (default state) */
#define LL_DBGMCU_TRACE_ASYNCH DBGMCU_CR_TRACE_IOEN /*!< TRACE pin assignment for Asynchronous Mode */
#define LL_DBGMCU_TRACE_SYNCH_SIZE1 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_0) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 1 */
#define LL_DBGMCU_TRACE_SYNCH_SIZE2 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE_1) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 2 */
#define LL_DBGMCU_TRACE_SYNCH_SIZE4 (DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE) /*!< TRACE pin assignment for Synchronous Mode with a TRACEDATA size of 4 */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_APB1_GRP1_STOP_IP DBGMCU APB1 GRP1 STOP IP
* @{
*/
#define LL_DBGMCU_APB1_GRP1_TIM2_STOP DBGMCU_APB1_FZ_DBG_TIM2_STOP /*!< TIM2 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM3_STOP DBGMCU_APB1_FZ_DBG_TIM3_STOP /*!< TIM3 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM4_STOP DBGMCU_APB1_FZ_DBG_TIM4_STOP /*!< TIM4 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM5_STOP DBGMCU_APB1_FZ_DBG_TIM5_STOP /*!< TIM5 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM6_STOP DBGMCU_APB1_FZ_DBG_TIM6_STOP /*!< TIM6 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM7_STOP DBGMCU_APB1_FZ_DBG_TIM7_STOP /*!< TIM7 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM12_STOP DBGMCU_APB1_FZ_DBG_TIM12_STOP /*!< TIM12 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM13_STOP DBGMCU_APB1_FZ_DBG_TIM13_STOP /*!< TIM13 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_TIM14_STOP DBGMCU_APB1_FZ_DBG_TIM14_STOP /*!< TIM14 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_LPTIM1_STOP DBGMCU_APB1_FZ_DBG_LPTIM1_STOP /*!< LPTIIM1 counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_RTC_STOP DBGMCU_APB1_FZ_DBG_RTC_STOP /*!< RTC counter stopped when core is halted */
#define LL_DBGMCU_APB1_GRP1_WWDG_STOP DBGMCU_APB1_FZ_DBG_WWDG_STOP /*!< Debug Window Watchdog stopped when Core is halted */
#define LL_DBGMCU_APB1_GRP1_IWDG_STOP DBGMCU_APB1_FZ_DBG_IWDG_STOP /*!< Debug Independent Watchdog stopped when Core is halted */
#define LL_DBGMCU_APB1_GRP1_I2C1_STOP DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT /*!< I2C1 SMBUS timeout mode stopped when Core is halted */
#define LL_DBGMCU_APB1_GRP1_I2C2_STOP DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT /*!< I2C2 SMBUS timeout mode stopped when Core is halted */
#define LL_DBGMCU_APB1_GRP1_I2C3_STOP DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT /*!< I2C3 SMBUS timeout mode stopped when Core is halted */
#if defined(DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT)
#define LL_DBGMCU_APB1_GRP1_I2C4_STOP DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT /*!< I2C4 SMBUS timeout mode stopped when core is halted */
#endif /* DBGMCU_APB1_FZ_DBG_I2C4_SMBUS_TIMEOUT */
#define LL_DBGMCU_APB1_GRP1_CAN1_STOP DBGMCU_APB1_FZ_DBG_CAN1_STOP /*!< CAN1 debug stopped when Core is halted */
#if defined(DBGMCU_APB1_FZ_DBG_CAN2_STOP)
#define LL_DBGMCU_APB1_GRP1_CAN2_STOP DBGMCU_APB1_FZ_DBG_CAN2_STOP /*!< CAN2 debug stopped when Core is halted */
#endif /* DBGMCU_APB1_FZ_DBG_CAN2_STOP */
#if defined(DBGMCU_APB1_FZ_DBG_CAN3_STOP)
#define LL_DBGMCU_APB1_GRP1_CAN3_STOP DBGMCU_APB1_FZ_DBG_CAN3_STOP /*!< CAN3 debug stopped when Core is halted */
#endif /*DBGMCU_APB1_FZ_DBG_CAN3_STOP*/
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_APB2_GRP1_STOP_IP DBGMCU APB2 GRP1 STOP IP
* @{
*/
#define LL_DBGMCU_APB2_GRP1_TIM1_STOP DBGMCU_APB2_FZ_DBG_TIM1_STOP /*!< TIM1 counter stopped when core is halted */
#define LL_DBGMCU_APB2_GRP1_TIM8_STOP DBGMCU_APB2_FZ_DBG_TIM8_STOP /*!< TIM8 counter stopped when core is halted */
#define LL_DBGMCU_APB2_GRP1_TIM9_STOP DBGMCU_APB2_FZ_DBG_TIM9_STOP /*!< TIM9 counter stopped when core is halted */
#define LL_DBGMCU_APB2_GRP1_TIM10_STOP DBGMCU_APB2_FZ_DBG_TIM10_STOP /*!< TIM10 counter stopped when core is halted */
#define LL_DBGMCU_APB2_GRP1_TIM11_STOP DBGMCU_APB2_FZ_DBG_TIM11_STOP /*!< TIM11 counter stopped when core is halted */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EC_LATENCY FLASH LATENCY
* @{
*/
#define LL_FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero wait state */
#define LL_FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One wait state */
#define LL_FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two wait states */
#define LL_FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three wait states */
#define LL_FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four wait states */
#define LL_FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH five wait state */
#define LL_FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH six wait state */
#define LL_FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH seven wait states */
#define LL_FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH eight wait states */
#define LL_FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH nine wait states */
#define LL_FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH ten wait states */
#define LL_FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH eleven wait states */
#define LL_FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH twelve wait states */
#define LL_FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH thirteen wait states */
#define LL_FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH fourteen wait states */
#define LL_FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH fifteen wait states */
/**
* @}
*/
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup SYSTEM_LL_Exported_Functions SYSTEM Exported Functions
* @{
*/
/** @defgroup SYSTEM_LL_EF_SYSCFG SYSCFG
* @{
*/
/**
* @brief Enables the FMC Memory Mapping Swapping
* @rmtoll SYSCFG_MEMRMP SWP_FMC LL_SYSCFG_EnableFMCMemorySwapping
* @note SDRAM is accessible at 0x60000000 and NOR/RAM
* is accessible at 0xC0000000
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableFMCMemorySwapping(void)
{
SET_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FMC_0);
}
/**
* @brief Disables the FMC Memory Mapping Swapping
* @rmtoll SYSCFG_MEMRMP SWP_FMC LL_SYSCFG_DisableFMCMemorySwapping
* @note SDRAM is accessible at 0xC0000000 (default mapping)
* and NOR/RAM is accessible at 0x60000000 (default mapping)
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableFMCMemorySwapping(void)
{
CLEAR_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FMC);
}
/**
* @brief Enables the Compensation Cell
* @rmtoll SYSCFG_CMPCR CMP_PD LL_SYSCFG_EnableCompensationCell
* @note The I/O compensation cell can be used only when the device supply
* voltage ranges from 2.4 to 3.6 V
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableCompensationCell(void)
{
SET_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_CMP_PD);
}
/**
* @brief Disables the Compensation Cell
* @rmtoll SYSCFG_CMPCR CMP_PD LL_SYSCFG_DisableCompensationCell
* @note The I/O compensation cell can be used only when the device supply
* voltage ranges from 2.4 to 3.6 V
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableCompensationCell(void)
{
CLEAR_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_CMP_PD);
}
/**
* @brief Get Compensation Cell ready Flag
* @rmtoll SYSCFG_CMPCR READY LL_SYSCFG_IsActiveFlag_CMPCR
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_SYSCFG_IsActiveFlag_CMPCR(void)
{
return (READ_BIT(SYSCFG->CMPCR, SYSCFG_CMPCR_READY) == (SYSCFG_CMPCR_READY));
}
/**
* @brief Get the memory boot mapping as configured by user
* @rmtoll SYSCFG_MEMRMP MEM_BOOT LL_SYSCFG_GetRemapMemoryBoot
* @retval Returned value can be one of the following values:
* @arg @ref LL_SYSCFG_REMAP_BOOT0
* @arg @ref LL_SYSCFG_REMAP_BOOT1
*
* (*) value not defined in all devices
*/
__STATIC_INLINE uint32_t LL_SYSCFG_GetRemapMemoryBoot(void)
{
return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_MEM_BOOT));
}
#if defined(SYSCFG_PMC_MII_RMII_SEL)
/**
* @brief Select Ethernet PHY interface
* @rmtoll SYSCFG_PMC MII_RMII_SEL LL_SYSCFG_SetPHYInterface
* @param Interface This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_PMC_ETHMII
* @arg @ref LL_SYSCFG_PMC_ETHRMII
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_SetPHYInterface(uint32_t Interface)
{
MODIFY_REG(SYSCFG->PMC, SYSCFG_PMC_MII_RMII_SEL, Interface);
}
/**
* @brief Get Ethernet PHY interface
* @rmtoll SYSCFG_PMC MII_RMII_SEL LL_SYSCFG_GetPHYInterface
* @retval Returned value can be one of the following values:
* @arg @ref LL_SYSCFG_PMC_ETHMII
* @arg @ref LL_SYSCFG_PMC_ETHRMII
* @retval None
*/
__STATIC_INLINE uint32_t LL_SYSCFG_GetPHYInterface(void)
{
return (uint32_t)(READ_BIT(SYSCFG->PMC, SYSCFG_PMC_MII_RMII_SEL));
}
#endif /* SYSCFG_PMC_MII_RMII_SEL */
#if defined(SYSCFG_MEMRMP_SWP_FB)
/**
* @brief Select Flash bank mode (Bank flashed at 0x08000000)
* @rmtoll SYSCFG_MEMRMP FB_MODE LL_SYSCFG_SetFlashBankMode
* @param Bank This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_BANKMODE_BANK1
* @arg @ref LL_SYSCFG_BANKMODE_BANK2
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_SetFlashBankMode(uint32_t Bank)
{
MODIFY_REG(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FB, Bank);
}
/**
* @brief Get Flash bank mode (Bank flashed at 0x08000000)
* @rmtoll SYSCFG_MEMRMP FB_MODE LL_SYSCFG_GetFlashBankMode
* @retval Returned value can be one of the following values:
* @arg @ref LL_SYSCFG_BANKMODE_BANK1
* @arg @ref LL_SYSCFG_BANKMODE_BANK2
*/
__STATIC_INLINE uint32_t LL_SYSCFG_GetFlashBankMode(void)
{
return (uint32_t)(READ_BIT(SYSCFG->MEMRMP, SYSCFG_MEMRMP_SWP_FB));
}
#endif /* SYSCFG_MEMRMP_SWP_FB */
#if defined(SYSCFG_PMC_I2C1_FMP)
/**
* @brief Enable the I2C fast mode plus driving capability.
* @rmtoll SYSCFG_PMC I2C_PBx_FMP LL_SYSCFG_EnableFastModePlus\n
* SYSCFG_PMC I2Cx_FMP LL_SYSCFG_EnableFastModePlus
* @param ConfigFastModePlus This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 (*)
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 (*)
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*)
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C4(*)
*
* (*) value not defined in all devices
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_EnableFastModePlus(uint32_t ConfigFastModePlus)
{
SET_BIT(SYSCFG->PMC, ConfigFastModePlus);
}
/**
* @brief Disable the I2C fast mode plus driving capability.
* @rmtoll SYSCFG_PMC I2C_PBx_FMP LL_SYSCFG_DisableFastModePlus\n
* SYSCFG_PMC I2Cx_FMP LL_SYSCFG_DisableFastModePlus
* @param ConfigFastModePlus This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB6
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB7
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB8 (*)
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_PB9 (*)
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C1
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C2 (*)
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C3
* @arg @ref LL_SYSCFG_I2C_FASTMODEPLUS_I2C4
* (*) value not defined in all devices
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_DisableFastModePlus(uint32_t ConfigFastModePlus)
{
CLEAR_BIT(SYSCFG->PMC, ConfigFastModePlus);
}
#endif /* SYSCFG_PMC_I2C1_FMP */
/**
* @brief Configure source input for the EXTI external interrupt.
* @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR2 EXTIx LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR3 EXTIx LL_SYSCFG_SetEXTISource\n
* SYSCFG_EXTICR4 EXTIx LL_SYSCFG_SetEXTISource
* @param Port This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_EXTI_PORTA
* @arg @ref LL_SYSCFG_EXTI_PORTB
* @arg @ref LL_SYSCFG_EXTI_PORTC
* @arg @ref LL_SYSCFG_EXTI_PORTD
* @arg @ref LL_SYSCFG_EXTI_PORTE
* @arg @ref LL_SYSCFG_EXTI_PORTF
* @arg @ref LL_SYSCFG_EXTI_PORTG
* @arg @ref LL_SYSCFG_EXTI_PORTH
* @arg @ref LL_SYSCFG_EXTI_PORTI
* @arg @ref LL_SYSCFG_EXTI_PORTJ
* @arg @ref LL_SYSCFG_EXTI_PORTK
*
* (*) value not defined in all devices
* @param Line This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_EXTI_LINE0
* @arg @ref LL_SYSCFG_EXTI_LINE1
* @arg @ref LL_SYSCFG_EXTI_LINE2
* @arg @ref LL_SYSCFG_EXTI_LINE3
* @arg @ref LL_SYSCFG_EXTI_LINE4
* @arg @ref LL_SYSCFG_EXTI_LINE5
* @arg @ref LL_SYSCFG_EXTI_LINE6
* @arg @ref LL_SYSCFG_EXTI_LINE7
* @arg @ref LL_SYSCFG_EXTI_LINE8
* @arg @ref LL_SYSCFG_EXTI_LINE9
* @arg @ref LL_SYSCFG_EXTI_LINE10
* @arg @ref LL_SYSCFG_EXTI_LINE11
* @arg @ref LL_SYSCFG_EXTI_LINE12
* @arg @ref LL_SYSCFG_EXTI_LINE13
* @arg @ref LL_SYSCFG_EXTI_LINE14
* @arg @ref LL_SYSCFG_EXTI_LINE15
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_SetEXTISource(uint32_t Port, uint32_t Line)
{
MODIFY_REG(SYSCFG->EXTICR[Line & 0xFFU], (Line >> 16U), Port << POSITION_VAL((Line >> 16U)));
}
/**
* @brief Get the configured defined for specific EXTI Line
* @rmtoll SYSCFG_EXTICR1 EXTIx LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR2 EXTIx LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR3 EXTIx LL_SYSCFG_GetEXTISource\n
* SYSCFG_EXTICR4 EXTIx LL_SYSCFG_GetEXTISource
* @param Line This parameter can be one of the following values:
* @arg @ref LL_SYSCFG_EXTI_LINE0
* @arg @ref LL_SYSCFG_EXTI_LINE1
* @arg @ref LL_SYSCFG_EXTI_LINE2
* @arg @ref LL_SYSCFG_EXTI_LINE3
* @arg @ref LL_SYSCFG_EXTI_LINE4
* @arg @ref LL_SYSCFG_EXTI_LINE5
* @arg @ref LL_SYSCFG_EXTI_LINE6
* @arg @ref LL_SYSCFG_EXTI_LINE7
* @arg @ref LL_SYSCFG_EXTI_LINE8
* @arg @ref LL_SYSCFG_EXTI_LINE9
* @arg @ref LL_SYSCFG_EXTI_LINE10
* @arg @ref LL_SYSCFG_EXTI_LINE11
* @arg @ref LL_SYSCFG_EXTI_LINE12
* @arg @ref LL_SYSCFG_EXTI_LINE13
* @arg @ref LL_SYSCFG_EXTI_LINE14
* @arg @ref LL_SYSCFG_EXTI_LINE15
* @retval Returned value can be one of the following values:
* @arg @ref LL_SYSCFG_EXTI_PORTA
* @arg @ref LL_SYSCFG_EXTI_PORTB
* @arg @ref LL_SYSCFG_EXTI_PORTC
* @arg @ref LL_SYSCFG_EXTI_PORTD
* @arg @ref LL_SYSCFG_EXTI_PORTE
* @arg @ref LL_SYSCFG_EXTI_PORTF
* @arg @ref LL_SYSCFG_EXTI_PORTG
* @arg @ref LL_SYSCFG_EXTI_PORTH
* @arg @ref LL_SYSCFG_EXTI_PORTI
* @arg @ref LL_SYSCFG_EXTI_PORTJ
* @arg @ref LL_SYSCFG_EXTI_PORTK
* (*) value not defined in all devices
*/
__STATIC_INLINE uint32_t LL_SYSCFG_GetEXTISource(uint32_t Line)
{
return (uint32_t)(READ_BIT(SYSCFG->EXTICR[Line & 0xFFU], (Line >> 16U)) >> POSITION_VAL(Line >> 16U));
}
#if defined(SYSCFG_CBR_CLL)
/**
* @brief Set connections to TIM1/8/15/16/17 Break inputs
* SYSCFG_CBR CLL LL_SYSCFG_SetTIMBreakInputs\n
* SYSCFG_CBR PVDL LL_SYSCFG_SetTIMBreakInputs
* @param Break This parameter can be a combination of the following values:
* @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP
* @arg @ref LL_SYSCFG_TIMBREAK_PVD
* @retval None
*/
__STATIC_INLINE void LL_SYSCFG_SetTIMBreakInputs(uint32_t Break)
{
MODIFY_REG(SYSCFG->CBR, SYSCFG_CBR_CLL | SYSCFG_CBR_PVDL, Break);
}
/**
* @brief Get connections to TIM1/8/15/16/17 Break inputs
* SYSCFG_CBR CLL LL_SYSCFG_GetTIMBreakInputs\n
* SYSCFG_CBR PVDL LL_SYSCFG_GetTIMBreakInputs
* @retval Returned value can be can be a combination of the following values:
* @arg @ref LL_SYSCFG_TIMBREAK_LOCKUP
* @arg @ref LL_SYSCFG_TIMBREAK_PVD
*/
__STATIC_INLINE uint32_t LL_SYSCFG_GetTIMBreakInputs(void)
{
return (uint32_t)(READ_BIT(SYSCFG->CBR, SYSCFG_CBR_CLL | SYSCFG_CBR_PVDL));
}
#endif /* SYSCFG_CBR_CLL */
/**
* @}
*/
/** @defgroup SYSTEM_LL_EF_DBGMCU DBGMCU
* @{
*/
/**
* @brief Return the device identifier
* @note For STM32F75xxx and STM32F74xxx devices, the device ID is 0x449
* @note For STM32F77xxx and STM32F76xxx devices, the device ID is 0x451
* @note For STM32F72xxx and STM32F73xxx devices, the device ID is 0x452
* @rmtoll DBGMCU_IDCODE DEV_ID LL_DBGMCU_GetDeviceID
* @retval Values between Min_Data=0x00 and Max_Data=0xFFF
*/
__STATIC_INLINE uint32_t LL_DBGMCU_GetDeviceID(void)
{
return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_DEV_ID));
}
/**
* @brief Return the device revision identifier
* @note This field indicates the revision of the device.
For example, it is read as RevA -> 0x1000, Cat 2 revZ -> 0x1001
* @rmtoll DBGMCU_IDCODE REV_ID LL_DBGMCU_GetRevisionID
* @retval Values between Min_Data=0x00 and Max_Data=0xFFFF
*/
__STATIC_INLINE uint32_t LL_DBGMCU_GetRevisionID(void)
{
return (uint32_t)(READ_BIT(DBGMCU->IDCODE, DBGMCU_IDCODE_REV_ID) >> DBGMCU_IDCODE_REV_ID_Pos);
}
/**
* @brief Enable the Debug Module during SLEEP mode
* @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_EnableDBGSleepMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_EnableDBGSleepMode(void)
{
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
}
/**
* @brief Disable the Debug Module during SLEEP mode
* @rmtoll DBGMCU_CR DBG_SLEEP LL_DBGMCU_DisableDBGSleepMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_DisableDBGSleepMode(void)
{
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
}
/**
* @brief Enable the Debug Module during STOP mode
* @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_EnableDBGStopMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_EnableDBGStopMode(void)
{
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
}
/**
* @brief Disable the Debug Module during STOP mode
* @rmtoll DBGMCU_CR DBG_STOP LL_DBGMCU_DisableDBGStopMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_DisableDBGStopMode(void)
{
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
}
/**
* @brief Enable the Debug Module during STANDBY mode
* @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_EnableDBGStandbyMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_EnableDBGStandbyMode(void)
{
SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
}
/**
* @brief Disable the Debug Module during STANDBY mode
* @rmtoll DBGMCU_CR DBG_STANDBY LL_DBGMCU_DisableDBGStandbyMode
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_DisableDBGStandbyMode(void)
{
CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
}
/**
* @brief Set Trace pin assignment control
* @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_SetTracePinAssignment\n
* DBGMCU_CR TRACE_MODE LL_DBGMCU_SetTracePinAssignment
* @param PinAssignment This parameter can be one of the following values:
* @arg @ref LL_DBGMCU_TRACE_NONE
* @arg @ref LL_DBGMCU_TRACE_ASYNCH
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_SetTracePinAssignment(uint32_t PinAssignment)
{
MODIFY_REG(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE, PinAssignment);
}
/**
* @brief Get Trace pin assignment control
* @rmtoll DBGMCU_CR TRACE_IOEN LL_DBGMCU_GetTracePinAssignment\n
* DBGMCU_CR TRACE_MODE LL_DBGMCU_GetTracePinAssignment
* @retval Returned value can be one of the following values:
* @arg @ref LL_DBGMCU_TRACE_NONE
* @arg @ref LL_DBGMCU_TRACE_ASYNCH
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE1
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE2
* @arg @ref LL_DBGMCU_TRACE_SYNCH_SIZE4
*/
__STATIC_INLINE uint32_t LL_DBGMCU_GetTracePinAssignment(void)
{
return (uint32_t)(READ_BIT(DBGMCU->CR, DBGMCU_CR_TRACE_IOEN | DBGMCU_CR_TRACE_MODE));
}
/**
* @brief Freeze APB1 peripherals (group1 peripherals)
* @rmtoll DBGMCU_APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_LPTIM1_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_I2C3_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_I2C4_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph\n
* DBGMCU_APB1_FZ DBG_CAN3_STOP LL_DBGMCU_APB1_GRP1_FreezePeriph
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C4_STOP (*)
* @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*)
* @arg @ref LL_DBGMCU_APB1_GRP1_CAN3_STOP (*)
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_FreezePeriph(uint32_t Periphs)
{
SET_BIT(DBGMCU->APB1FZ, Periphs);
}
/**
* @brief Unfreeze APB1 peripherals (group1 peripherals)
* @rmtoll DBGMCU_APB1_FZ DBG_TIM2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_TIM3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_TIM4_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_TIM5_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_TIM6_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_TIM7_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_TIM12_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_TIM13_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_TIM14_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_LPTIM1_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_RTC_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_WWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_IWDG_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_I2C1_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_I2C2_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_I2C3_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_I2C4_SMBUS_TIMEOUT LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_CAN1_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_CAN2_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph\n
* DBGMCU_APB1_FZ DBG_CAN3_STOP LL_DBGMCU_APB1_GRP1_UnFreezePeriph
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM2_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM3_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM4_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM5_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM6_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM7_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM12_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM13_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_TIM14_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_LPTIM1_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_RTC_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_WWDG_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_IWDG_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C1_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C2_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C3_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_I2C4_STOP (*)
* @arg @ref LL_DBGMCU_APB1_GRP1_CAN1_STOP
* @arg @ref LL_DBGMCU_APB1_GRP1_CAN2_STOP (*)
* @arg @ref LL_DBGMCU_APB1_GRP1_CAN3_STOP (*)
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_APB1_GRP1_UnFreezePeriph(uint32_t Periphs)
{
CLEAR_BIT(DBGMCU->APB1FZ, Periphs);
}
/**
* @brief Freeze APB2 peripherals
* @rmtoll DBGMCU_APB2_FZ DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* DBGMCU_APB2_FZ DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* DBGMCU_APB2_FZ DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* DBGMCU_APB2_FZ DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph\n
* DBGMCU_APB2_FZ DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_FreezePeriph
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_FreezePeriph(uint32_t Periphs)
{
SET_BIT(DBGMCU->APB2FZ, Periphs);
}
/**
* @brief Unfreeze APB2 peripherals
* @rmtoll DBGMCU_APB2_FZ DBG_TIM1_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
* DBGMCU_APB2_FZ DBG_TIM8_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
* DBGMCU_APB2_FZ DBG_TIM9_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
* DBGMCU_APB2_FZ DBG_TIM10_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph\n
* DBGMCU_APB2_FZ DBG_TIM11_STOP LL_DBGMCU_APB2_GRP1_UnFreezePeriph
* @param Periphs This parameter can be a combination of the following values:
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM1_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM8_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM9_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM10_STOP
* @arg @ref LL_DBGMCU_APB2_GRP1_TIM11_STOP
*
* (*) value not defined in all devices.
* @retval None
*/
__STATIC_INLINE void LL_DBGMCU_APB2_GRP1_UnFreezePeriph(uint32_t Periphs)
{
CLEAR_BIT(DBGMCU->APB2FZ, Periphs);
}
/**
* @}
*/
/** @defgroup SYSTEM_LL_EF_FLASH FLASH
* @{
*/
/**
* @brief Set FLASH Latency
* @rmtoll FLASH_ACR LATENCY LL_FLASH_SetLatency
* @param Latency This parameter can be one of the following values:
* @arg @ref LL_FLASH_LATENCY_0
* @arg @ref LL_FLASH_LATENCY_1
* @arg @ref LL_FLASH_LATENCY_2
* @arg @ref LL_FLASH_LATENCY_3
* @arg @ref LL_FLASH_LATENCY_4
* @arg @ref LL_FLASH_LATENCY_5
* @arg @ref LL_FLASH_LATENCY_6
* @arg @ref LL_FLASH_LATENCY_7
* @arg @ref LL_FLASH_LATENCY_8
* @arg @ref LL_FLASH_LATENCY_9
* @arg @ref LL_FLASH_LATENCY_10
* @arg @ref LL_FLASH_LATENCY_11
* @arg @ref LL_FLASH_LATENCY_12
* @arg @ref LL_FLASH_LATENCY_13
* @arg @ref LL_FLASH_LATENCY_14
* @arg @ref LL_FLASH_LATENCY_15
* @retval None
*/
__STATIC_INLINE void LL_FLASH_SetLatency(uint32_t Latency)
{
MODIFY_REG(FLASH->ACR, FLASH_ACR_LATENCY, Latency);
}
/**
* @brief Get FLASH Latency
* @rmtoll FLASH_ACR LATENCY LL_FLASH_GetLatency
* @retval Returned value can be one of the following values:
* @arg @ref LL_FLASH_LATENCY_0
* @arg @ref LL_FLASH_LATENCY_1
* @arg @ref LL_FLASH_LATENCY_2
* @arg @ref LL_FLASH_LATENCY_3
* @arg @ref LL_FLASH_LATENCY_4
* @arg @ref LL_FLASH_LATENCY_5
* @arg @ref LL_FLASH_LATENCY_6
* @arg @ref LL_FLASH_LATENCY_7
* @arg @ref LL_FLASH_LATENCY_8
* @arg @ref LL_FLASH_LATENCY_9
* @arg @ref LL_FLASH_LATENCY_10
* @arg @ref LL_FLASH_LATENCY_11
* @arg @ref LL_FLASH_LATENCY_12
* @arg @ref LL_FLASH_LATENCY_13
* @arg @ref LL_FLASH_LATENCY_14
* @arg @ref LL_FLASH_LATENCY_15
*/
__STATIC_INLINE uint32_t LL_FLASH_GetLatency(void)
{
return (uint32_t)(READ_BIT(FLASH->ACR, FLASH_ACR_LATENCY));
}
/**
* @brief Enable Prefetch
* @rmtoll FLASH_ACR PRFTEN LL_FLASH_EnablePrefetch
* @retval None
*/
__STATIC_INLINE void LL_FLASH_EnablePrefetch(void)
{
SET_BIT(FLASH->ACR, FLASH_ACR_PRFTEN);
}
/**
* @brief Disable Prefetch
* @rmtoll FLASH_ACR PRFTEN LL_FLASH_DisablePrefetch
* @retval None
*/
__STATIC_INLINE void LL_FLASH_DisablePrefetch(void)
{
CLEAR_BIT(FLASH->ACR, FLASH_ACR_PRFTEN);
}
/**
* @brief Check if Prefetch buffer is enabled
* @rmtoll FLASH_ACR PRFTEN LL_FLASH_IsPrefetchEnabled
* @retval State of bit (1 or 0).
*/
__STATIC_INLINE uint32_t LL_FLASH_IsPrefetchEnabled(void)
{
return (READ_BIT(FLASH->ACR, FLASH_ACR_PRFTEN) == (FLASH_ACR_PRFTEN));
}
/**
* @brief Enable ART Accelerator
* @rmtoll FLASH_ACR ARTEN LL_FLASH_EnableART
* @retval None
*/
__STATIC_INLINE void LL_FLASH_EnableART(void)
{
SET_BIT(FLASH->ACR, FLASH_ACR_ARTEN);
}
/**
* @brief Disable ART Accelerator
* @rmtoll FLASH_ACR ARTEN LL_FLASH_DisableART
* @retval None
*/
__STATIC_INLINE void LL_FLASH_DisableART(void)
{
CLEAR_BIT(FLASH->ACR, FLASH_ACR_ARTEN);
}
/**
* @brief Enable ART Reset
* @rmtoll FLASH_ACR ARTRST LL_FLASH_EnableARTReset
* @retval None
*/
__STATIC_INLINE void LL_FLASH_EnableARTReset(void)
{
SET_BIT(FLASH->ACR, FLASH_ACR_ARTRST);
}
/**
* @brief Disable ART Reset
* @rmtoll FLASH_ACR ARTRST LL_FLASH_DisableARTReset
* @retval None
*/
__STATIC_INLINE void LL_FLASH_DisableARTReset(void)
{
CLEAR_BIT(FLASH->ACR, FLASH_ACR_ARTRST);
}
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined (FLASH) || defined (SYSCFG) || defined (DBGMCU) */
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F7xx_LL_SYSTEM_H */