| /** |
| ****************************************************************************** |
| * @file stm32f7xx_ll_dma.c |
| * @author MCD Application Team |
| * @brief DMA LL module driver. |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2017 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file in |
| * the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| #if defined(USE_FULL_LL_DRIVER) |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f7xx_ll_dma.h" |
| #include "stm32f7xx_ll_bus.h" |
| #ifdef USE_FULL_ASSERT |
| #include "stm32_assert.h" |
| #else |
| #define assert_param(expr) ((void)0U) |
| #endif |
| |
| /** @addtogroup STM32F7xx_LL_Driver |
| * @{ |
| */ |
| |
| #if defined (DMA1) || defined (DMA2) |
| |
| /** @defgroup DMA_LL DMA |
| * @{ |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /* Private constants ---------------------------------------------------------*/ |
| /* Private macros ------------------------------------------------------------*/ |
| /** @addtogroup DMA_LL_Private_Macros |
| * @{ |
| */ |
| #define IS_LL_DMA_DIRECTION(__VALUE__) (((__VALUE__) == LL_DMA_DIRECTION_PERIPH_TO_MEMORY) || \ |
| ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) || \ |
| ((__VALUE__) == LL_DMA_DIRECTION_MEMORY_TO_MEMORY)) |
| |
| #define IS_LL_DMA_MODE(__VALUE__) (((__VALUE__) == LL_DMA_MODE_NORMAL) || \ |
| ((__VALUE__) == LL_DMA_MODE_CIRCULAR) || \ |
| ((__VALUE__) == LL_DMA_MODE_PFCTRL)) |
| |
| #define IS_LL_DMA_PERIPHINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_PERIPH_INCREMENT) || \ |
| ((__VALUE__) == LL_DMA_PERIPH_NOINCREMENT)) |
| |
| #define IS_LL_DMA_MEMORYINCMODE(__VALUE__) (((__VALUE__) == LL_DMA_MEMORY_INCREMENT) || \ |
| ((__VALUE__) == LL_DMA_MEMORY_NOINCREMENT)) |
| |
| #define IS_LL_DMA_PERIPHDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_PDATAALIGN_BYTE) || \ |
| ((__VALUE__) == LL_DMA_PDATAALIGN_HALFWORD) || \ |
| ((__VALUE__) == LL_DMA_PDATAALIGN_WORD)) |
| |
| #define IS_LL_DMA_MEMORYDATASIZE(__VALUE__) (((__VALUE__) == LL_DMA_MDATAALIGN_BYTE) || \ |
| ((__VALUE__) == LL_DMA_MDATAALIGN_HALFWORD) || \ |
| ((__VALUE__) == LL_DMA_MDATAALIGN_WORD)) |
| |
| #define IS_LL_DMA_NBDATA(__VALUE__) ((__VALUE__) <= 0x0000FFFFU) |
| |
| #if defined(DMA_CHANNEL_SELECTION_8_15) |
| #define IS_LL_DMA_CHANNEL(__VALUE__) (((__VALUE__) == LL_DMA_CHANNEL_0) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_1) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_2) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_3) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_4) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_5) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_6) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_7) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_8) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_9) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_10) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_11) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_12) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_13) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_14) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_15)) |
| |
| #else |
| #define IS_LL_DMA_CHANNEL(__VALUE__) (((__VALUE__) == LL_DMA_CHANNEL_0) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_1) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_2) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_3) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_4) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_5) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_6) || \ |
| ((__VALUE__) == LL_DMA_CHANNEL_7)) |
| |
| #endif /* DMA_CHANNEL_SELECTION_8_15 */ |
| |
| #define IS_LL_DMA_PRIORITY(__VALUE__) (((__VALUE__) == LL_DMA_PRIORITY_LOW) || \ |
| ((__VALUE__) == LL_DMA_PRIORITY_MEDIUM) || \ |
| ((__VALUE__) == LL_DMA_PRIORITY_HIGH) || \ |
| ((__VALUE__) == LL_DMA_PRIORITY_VERYHIGH)) |
| |
| #define IS_LL_DMA_ALL_STREAM_INSTANCE(INSTANCE, STREAM) ((((INSTANCE) == DMA1) && \ |
| (((STREAM) == LL_DMA_STREAM_0) || \ |
| ((STREAM) == LL_DMA_STREAM_1) || \ |
| ((STREAM) == LL_DMA_STREAM_2) || \ |
| ((STREAM) == LL_DMA_STREAM_3) || \ |
| ((STREAM) == LL_DMA_STREAM_4) || \ |
| ((STREAM) == LL_DMA_STREAM_5) || \ |
| ((STREAM) == LL_DMA_STREAM_6) || \ |
| ((STREAM) == LL_DMA_STREAM_7) || \ |
| ((STREAM) == LL_DMA_STREAM_ALL))) ||\ |
| (((INSTANCE) == DMA2) && \ |
| (((STREAM) == LL_DMA_STREAM_0) || \ |
| ((STREAM) == LL_DMA_STREAM_1) || \ |
| ((STREAM) == LL_DMA_STREAM_2) || \ |
| ((STREAM) == LL_DMA_STREAM_3) || \ |
| ((STREAM) == LL_DMA_STREAM_4) || \ |
| ((STREAM) == LL_DMA_STREAM_5) || \ |
| ((STREAM) == LL_DMA_STREAM_6) || \ |
| ((STREAM) == LL_DMA_STREAM_7) || \ |
| ((STREAM) == LL_DMA_STREAM_ALL)))) |
| |
| #define IS_LL_DMA_FIFO_MODE_STATE(STATE) (((STATE) == LL_DMA_FIFOMODE_DISABLE ) || \ |
| ((STATE) == LL_DMA_FIFOMODE_ENABLE)) |
| |
| #define IS_LL_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == LL_DMA_FIFOTHRESHOLD_1_4) || \ |
| ((THRESHOLD) == LL_DMA_FIFOTHRESHOLD_1_2) || \ |
| ((THRESHOLD) == LL_DMA_FIFOTHRESHOLD_3_4) || \ |
| ((THRESHOLD) == LL_DMA_FIFOTHRESHOLD_FULL)) |
| |
| #define IS_LL_DMA_MEMORY_BURST(BURST) (((BURST) == LL_DMA_MBURST_SINGLE) || \ |
| ((BURST) == LL_DMA_MBURST_INC4) || \ |
| ((BURST) == LL_DMA_MBURST_INC8) || \ |
| ((BURST) == LL_DMA_MBURST_INC16)) |
| |
| #define IS_LL_DMA_PERIPHERAL_BURST(BURST) (((BURST) == LL_DMA_PBURST_SINGLE) || \ |
| ((BURST) == LL_DMA_PBURST_INC4) || \ |
| ((BURST) == LL_DMA_PBURST_INC8) || \ |
| ((BURST) == LL_DMA_PBURST_INC16)) |
| |
| /** |
| * @} |
| */ |
| |
| /* Private function prototypes -----------------------------------------------*/ |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup DMA_LL_Exported_Functions |
| * @{ |
| */ |
| |
| /** @addtogroup DMA_LL_EF_Init |
| * @{ |
| */ |
| |
| /** |
| * @brief De-initialize the DMA registers to their default reset values. |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @arg @ref LL_DMA_STREAM_ALL |
| * @retval An ErrorStatus enumeration value: |
| * - SUCCESS: DMA registers are de-initialized |
| * - ERROR: DMA registers are not de-initialized |
| */ |
| uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| DMA_Stream_TypeDef *tmp = (DMA_Stream_TypeDef *)DMA1_Stream0; |
| ErrorStatus status = SUCCESS; |
| |
| /* Check the DMA Instance DMAx and Stream parameters*/ |
| assert_param(IS_LL_DMA_ALL_STREAM_INSTANCE(DMAx, Stream)); |
| |
| if (Stream == LL_DMA_STREAM_ALL) |
| { |
| if (DMAx == DMA1) |
| { |
| /* Force reset of DMA clock */ |
| LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA1); |
| |
| /* Release reset of DMA clock */ |
| LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA1); |
| } |
| else if (DMAx == DMA2) |
| { |
| /* Force reset of DMA clock */ |
| LL_AHB1_GRP1_ForceReset(LL_AHB1_GRP1_PERIPH_DMA2); |
| |
| /* Release reset of DMA clock */ |
| LL_AHB1_GRP1_ReleaseReset(LL_AHB1_GRP1_PERIPH_DMA2); |
| } |
| else |
| { |
| status = ERROR; |
| } |
| } |
| else |
| { |
| /* Disable the selected Stream */ |
| LL_DMA_DisableStream(DMAx,Stream); |
| |
| /* Get the DMA Stream Instance */ |
| tmp = (DMA_Stream_TypeDef *)(__LL_DMA_GET_STREAM_INSTANCE(DMAx, Stream)); |
| |
| /* Reset DMAx_Streamy configuration register */ |
| LL_DMA_WriteReg(tmp, CR, 0U); |
| |
| /* Reset DMAx_Streamy remaining bytes register */ |
| LL_DMA_WriteReg(tmp, NDTR, 0U); |
| |
| /* Reset DMAx_Streamy peripheral address register */ |
| LL_DMA_WriteReg(tmp, PAR, 0U); |
| |
| /* Reset DMAx_Streamy memory address register */ |
| LL_DMA_WriteReg(tmp, M0AR, 0U); |
| |
| /* Reset DMAx_Streamy memory address register */ |
| LL_DMA_WriteReg(tmp, M1AR, 0U); |
| |
| /* Reset DMAx_Streamy FIFO control register */ |
| LL_DMA_WriteReg(tmp, FCR, 0x00000021U); |
| |
| /* Reset Channel register field for DMAx Stream*/ |
| LL_DMA_SetChannelSelection(DMAx, Stream, LL_DMA_CHANNEL_0); |
| |
| if(Stream == LL_DMA_STREAM_0) |
| { |
| /* Reset the Stream0 pending flags */ |
| DMAx->LIFCR = 0x0000003FU; |
| } |
| else if(Stream == LL_DMA_STREAM_1) |
| { |
| /* Reset the Stream1 pending flags */ |
| DMAx->LIFCR = 0x00000F40U; |
| } |
| else if(Stream == LL_DMA_STREAM_2) |
| { |
| /* Reset the Stream2 pending flags */ |
| DMAx->LIFCR = 0x003F0000U; |
| } |
| else if(Stream == LL_DMA_STREAM_3) |
| { |
| /* Reset the Stream3 pending flags */ |
| DMAx->LIFCR = 0x0F400000U; |
| } |
| else if(Stream == LL_DMA_STREAM_4) |
| { |
| /* Reset the Stream4 pending flags */ |
| DMAx->HIFCR = 0x0000003FU; |
| } |
| else if(Stream == LL_DMA_STREAM_5) |
| { |
| /* Reset the Stream5 pending flags */ |
| DMAx->HIFCR = 0x00000F40U; |
| } |
| else if(Stream == LL_DMA_STREAM_6) |
| { |
| /* Reset the Stream6 pending flags */ |
| DMAx->HIFCR = 0x003F0000U; |
| } |
| else if(Stream == LL_DMA_STREAM_7) |
| { |
| /* Reset the Stream7 pending flags */ |
| DMAx->HIFCR = 0x0F400000U; |
| } |
| else |
| { |
| status = ERROR; |
| } |
| } |
| |
| return status; |
| } |
| |
| /** |
| * @brief Initialize the DMA registers according to the specified parameters in DMA_InitStruct. |
| * @note To convert DMAx_Streamy Instance to DMAx Instance and Streamy, use helper macros : |
| * @arg @ref __LL_DMA_GET_INSTANCE |
| * @arg @ref __LL_DMA_GET_STREAM |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param DMA_InitStruct pointer to a @ref LL_DMA_InitTypeDef structure. |
| * @retval An ErrorStatus enumeration value: |
| * - SUCCESS: DMA registers are initialized |
| * - ERROR: Not applicable |
| */ |
| uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Stream, LL_DMA_InitTypeDef *DMA_InitStruct) |
| { |
| /* Check the DMA Instance DMAx and Stream parameters*/ |
| assert_param(IS_LL_DMA_ALL_STREAM_INSTANCE(DMAx, Stream)); |
| |
| /* Check the DMA parameters from DMA_InitStruct */ |
| assert_param(IS_LL_DMA_DIRECTION(DMA_InitStruct->Direction)); |
| assert_param(IS_LL_DMA_MODE(DMA_InitStruct->Mode)); |
| assert_param(IS_LL_DMA_PERIPHINCMODE(DMA_InitStruct->PeriphOrM2MSrcIncMode)); |
| assert_param(IS_LL_DMA_MEMORYINCMODE(DMA_InitStruct->MemoryOrM2MDstIncMode)); |
| assert_param(IS_LL_DMA_PERIPHDATASIZE(DMA_InitStruct->PeriphOrM2MSrcDataSize)); |
| assert_param(IS_LL_DMA_MEMORYDATASIZE(DMA_InitStruct->MemoryOrM2MDstDataSize)); |
| assert_param(IS_LL_DMA_NBDATA(DMA_InitStruct->NbData)); |
| assert_param(IS_LL_DMA_CHANNEL(DMA_InitStruct->Channel)); |
| assert_param(IS_LL_DMA_PRIORITY(DMA_InitStruct->Priority)); |
| assert_param(IS_LL_DMA_FIFO_MODE_STATE(DMA_InitStruct->FIFOMode)); |
| /* Check the memory burst, peripheral burst and FIFO threshold parameters only |
| when FIFO mode is enabled */ |
| if(DMA_InitStruct->FIFOMode != LL_DMA_FIFOMODE_DISABLE) |
| { |
| assert_param(IS_LL_DMA_FIFO_THRESHOLD(DMA_InitStruct->FIFOThreshold)); |
| assert_param(IS_LL_DMA_MEMORY_BURST(DMA_InitStruct->MemBurst)); |
| assert_param(IS_LL_DMA_PERIPHERAL_BURST(DMA_InitStruct->PeriphBurst)); |
| } |
| |
| /*---------------------------- DMAx SxCR Configuration ------------------------ |
| * Configure DMAx_Streamy: data transfer direction, data transfer mode, |
| * peripheral and memory increment mode, |
| * data size alignment and priority level with parameters : |
| * - Direction: DMA_SxCR_DIR[1:0] bits |
| * - Mode: DMA_SxCR_CIRC bit |
| * - PeriphOrM2MSrcIncMode: DMA_SxCR_PINC bit |
| * - MemoryOrM2MDstIncMode: DMA_SxCR_MINC bit |
| * - PeriphOrM2MSrcDataSize: DMA_SxCR_PSIZE[1:0] bits |
| * - MemoryOrM2MDstDataSize: DMA_SxCR_MSIZE[1:0] bits |
| * - Priority: DMA_SxCR_PL[1:0] bits |
| */ |
| LL_DMA_ConfigTransfer(DMAx, Stream, DMA_InitStruct->Direction | \ |
| DMA_InitStruct->Mode | \ |
| DMA_InitStruct->PeriphOrM2MSrcIncMode | \ |
| DMA_InitStruct->MemoryOrM2MDstIncMode | \ |
| DMA_InitStruct->PeriphOrM2MSrcDataSize | \ |
| DMA_InitStruct->MemoryOrM2MDstDataSize | \ |
| DMA_InitStruct->Priority |
| ); |
| |
| if(DMA_InitStruct->FIFOMode != LL_DMA_FIFOMODE_DISABLE) |
| { |
| /*---------------------------- DMAx SxFCR Configuration ------------------------ |
| * Configure DMAx_Streamy: fifo mode and fifo threshold with parameters : |
| * - FIFOMode: DMA_SxFCR_DMDIS bit |
| * - FIFOThreshold: DMA_SxFCR_FTH[1:0] bits |
| */ |
| LL_DMA_ConfigFifo(DMAx, Stream, DMA_InitStruct->FIFOMode, DMA_InitStruct->FIFOThreshold); |
| |
| /*---------------------------- DMAx SxCR Configuration -------------------------- |
| * Configure DMAx_Streamy: memory burst transfer with parameters : |
| * - MemBurst: DMA_SxCR_MBURST[1:0] bits |
| */ |
| LL_DMA_SetMemoryBurstxfer(DMAx,Stream,DMA_InitStruct->MemBurst); |
| |
| /*---------------------------- DMAx SxCR Configuration -------------------------- |
| * Configure DMAx_Streamy: peripheral burst transfer with parameters : |
| * - PeriphBurst: DMA_SxCR_PBURST[1:0] bits |
| */ |
| LL_DMA_SetPeriphBurstxfer(DMAx,Stream,DMA_InitStruct->PeriphBurst); |
| } |
| |
| /*-------------------------- DMAx SxM0AR Configuration -------------------------- |
| * Configure the memory or destination base address with parameter : |
| * - MemoryOrM2MDstAddress: DMA_SxM0AR_M0A[31:0] bits |
| */ |
| LL_DMA_SetMemoryAddress(DMAx, Stream, DMA_InitStruct->MemoryOrM2MDstAddress); |
| |
| /*-------------------------- DMAx SxPAR Configuration --------------------------- |
| * Configure the peripheral or source base address with parameter : |
| * - PeriphOrM2MSrcAddress: DMA_SxPAR_PA[31:0] bits |
| */ |
| LL_DMA_SetPeriphAddress(DMAx, Stream, DMA_InitStruct->PeriphOrM2MSrcAddress); |
| |
| /*--------------------------- DMAx SxNDTR Configuration ------------------------- |
| * Configure the peripheral base address with parameter : |
| * - NbData: DMA_SxNDT[15:0] bits |
| */ |
| LL_DMA_SetDataLength(DMAx, Stream, DMA_InitStruct->NbData); |
| |
| /*--------------------------- DMA SxCR_CHSEL Configuration ---------------------- |
| * Configure the peripheral base address with parameter : |
| * - PeriphRequest: DMA_SxCR_CHSEL[3:0] bits |
| */ |
| LL_DMA_SetChannelSelection(DMAx, Stream, DMA_InitStruct->Channel); |
| |
| return SUCCESS; |
| } |
| |
| /** |
| * @brief Set each @ref LL_DMA_InitTypeDef field to default value. |
| * @param DMA_InitStruct Pointer to a @ref LL_DMA_InitTypeDef structure. |
| * @retval None |
| */ |
| void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct) |
| { |
| /* Set DMA_InitStruct fields to default values */ |
| DMA_InitStruct->PeriphOrM2MSrcAddress = 0x00000000U; |
| DMA_InitStruct->MemoryOrM2MDstAddress = 0x00000000U; |
| DMA_InitStruct->Direction = LL_DMA_DIRECTION_PERIPH_TO_MEMORY; |
| DMA_InitStruct->Mode = LL_DMA_MODE_NORMAL; |
| DMA_InitStruct->PeriphOrM2MSrcIncMode = LL_DMA_PERIPH_NOINCREMENT; |
| DMA_InitStruct->MemoryOrM2MDstIncMode = LL_DMA_MEMORY_NOINCREMENT; |
| DMA_InitStruct->PeriphOrM2MSrcDataSize = LL_DMA_PDATAALIGN_BYTE; |
| DMA_InitStruct->MemoryOrM2MDstDataSize = LL_DMA_MDATAALIGN_BYTE; |
| DMA_InitStruct->NbData = 0x00000000U; |
| DMA_InitStruct->Channel = LL_DMA_CHANNEL_0; |
| DMA_InitStruct->Priority = LL_DMA_PRIORITY_LOW; |
| DMA_InitStruct->FIFOMode = LL_DMA_FIFOMODE_DISABLE; |
| DMA_InitStruct->FIFOThreshold = LL_DMA_FIFOTHRESHOLD_1_4; |
| DMA_InitStruct->MemBurst = LL_DMA_MBURST_SINGLE; |
| DMA_InitStruct->PeriphBurst = LL_DMA_PBURST_SINGLE; |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* DMA1 || DMA2 */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* USE_FULL_LL_DRIVER */ |
| |
