| /** |
| ****************************************************************************** |
| * @file stm32f7xx_ll_dma.h |
| * @author MCD Application Team |
| * @brief Header file of DMA LL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * Copyright (c) 2017 STMicroelectronics. |
| * All rights reserved. |
| * |
| * This software is licensed under terms that can be found in the LICENSE file in |
| * the root directory of this software component. |
| * If no LICENSE file comes with this software, it is provided AS-IS. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef __STM32F7xx_LL_DMA_H |
| #define __STM32F7xx_LL_DMA_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f7xx.h" |
| |
| /** @addtogroup STM32F7xx_LL_Driver |
| * @{ |
| */ |
| |
| #if defined (DMA1) || defined (DMA2) |
| |
| /** @defgroup DMA_LL DMA |
| * @{ |
| */ |
| |
| /* Private types -------------------------------------------------------------*/ |
| /* Private variables ---------------------------------------------------------*/ |
| /** @defgroup DMA_LL_Private_Variables DMA Private Variables |
| * @{ |
| */ |
| /* Array used to get the DMA stream register offset versus stream index LL_DMA_STREAM_x */ |
| static const uint8_t STREAM_OFFSET_TAB[] = |
| { |
| (uint8_t)(DMA1_Stream0_BASE - DMA1_BASE), |
| (uint8_t)(DMA1_Stream1_BASE - DMA1_BASE), |
| (uint8_t)(DMA1_Stream2_BASE - DMA1_BASE), |
| (uint8_t)(DMA1_Stream3_BASE - DMA1_BASE), |
| (uint8_t)(DMA1_Stream4_BASE - DMA1_BASE), |
| (uint8_t)(DMA1_Stream5_BASE - DMA1_BASE), |
| (uint8_t)(DMA1_Stream6_BASE - DMA1_BASE), |
| (uint8_t)(DMA1_Stream7_BASE - DMA1_BASE) |
| }; |
| |
| /** |
| * @} |
| */ |
| |
| /* Private constants ---------------------------------------------------------*/ |
| /** @defgroup DMA_LL_Private_Constants DMA Private Constants |
| * @{ |
| */ |
| #if defined(DMA_SxCR_CHSEL_3) |
| #define DMA_CHANNEL_SELECTION_8_15 |
| #endif /* DMA_SxCR_CHSEL_3 */ |
| /** |
| * @} |
| */ |
| |
| |
| /* Private macros ------------------------------------------------------------*/ |
| /* Exported types ------------------------------------------------------------*/ |
| #if defined(USE_FULL_LL_DRIVER) |
| /** @defgroup DMA_LL_ES_INIT DMA Exported Init structure |
| * @{ |
| */ |
| typedef struct |
| { |
| uint32_t PeriphOrM2MSrcAddress; /*!< Specifies the peripheral base address for DMA transfer |
| or as Source base address in case of memory to memory transfer direction. |
| |
| This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ |
| |
| uint32_t MemoryOrM2MDstAddress; /*!< Specifies the memory base address for DMA transfer |
| or as Destination base address in case of memory to memory transfer direction. |
| |
| This parameter must be a value between Min_Data = 0 and Max_Data = 0xFFFFFFFF. */ |
| |
| uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, |
| from memory to memory or from peripheral to memory. |
| This parameter can be a value of @ref DMA_LL_EC_DIRECTION |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataTransferDirection(). */ |
| |
| uint32_t Mode; /*!< Specifies the normal or circular operation mode. |
| This parameter can be a value of @ref DMA_LL_EC_MODE |
| @note The circular buffer mode cannot be used if the memory to memory |
| data transfer direction is configured on the selected Stream |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetMode(). */ |
| |
| uint32_t PeriphOrM2MSrcIncMode; /*!< Specifies whether the Peripheral address or Source address in case of memory to memory transfer direction |
| is incremented or not. |
| This parameter can be a value of @ref DMA_LL_EC_PERIPH |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphIncMode(). */ |
| |
| uint32_t MemoryOrM2MDstIncMode; /*!< Specifies whether the Memory address or Destination address in case of memory to memory transfer direction |
| is incremented or not. |
| This parameter can be a value of @ref DMA_LL_EC_MEMORY |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryIncMode(). */ |
| |
| uint32_t PeriphOrM2MSrcDataSize; /*!< Specifies the Peripheral data size alignment or Source data size alignment (byte, half word, word) |
| in case of memory to memory transfer direction. |
| This parameter can be a value of @ref DMA_LL_EC_PDATAALIGN |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphSize(). */ |
| |
| uint32_t MemoryOrM2MDstDataSize; /*!< Specifies the Memory data size alignment or Destination data size alignment (byte, half word, word) |
| in case of memory to memory transfer direction. |
| This parameter can be a value of @ref DMA_LL_EC_MDATAALIGN |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemorySize(). */ |
| |
| uint32_t NbData; /*!< Specifies the number of data to transfer, in data unit. |
| The data unit is equal to the source buffer configuration set in PeripheralSize |
| or MemorySize parameters depending in the transfer direction. |
| This parameter must be a value between Min_Data = 0 and Max_Data = 0x0000FFFF |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetDataLength(). */ |
| |
| uint32_t Channel; /*!< Specifies the peripheral channel. |
| This parameter can be a value of @ref DMA_LL_EC_CHANNEL |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetChannelSelection(). */ |
| |
| uint32_t Priority; /*!< Specifies the channel priority level. |
| This parameter can be a value of @ref DMA_LL_EC_PRIORITY |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetStreamPriorityLevel(). */ |
| |
| uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream. |
| This parameter can be a value of @ref DMA_LL_FIFOMODE |
| @note The Direct mode (FIFO mode disabled) cannot be used if the |
| memory-to-memory data transfer is configured on the selected stream |
| |
| This feature can be modified afterwards using unitary functions @ref LL_DMA_EnableFifoMode() or @ref LL_DMA_EnableFifoMode() . */ |
| |
| uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level. |
| This parameter can be a value of @ref DMA_LL_EC_FIFOTHRESHOLD |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetFIFOThreshold(). */ |
| |
| uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers. |
| It specifies the amount of data to be transferred in a single non interruptible |
| transaction. |
| This parameter can be a value of @ref DMA_LL_EC_MBURST |
| @note The burst mode is possible only if the address Increment mode is enabled. |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetMemoryBurstxfer(). */ |
| |
| uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers. |
| It specifies the amount of data to be transferred in a single non interruptible |
| transaction. |
| This parameter can be a value of @ref DMA_LL_EC_PBURST |
| @note The burst mode is possible only if the address Increment mode is enabled. |
| |
| This feature can be modified afterwards using unitary function @ref LL_DMA_SetPeriphBurstxfer(). */ |
| |
| } LL_DMA_InitTypeDef; |
| /** |
| * @} |
| */ |
| #endif /*USE_FULL_LL_DRIVER*/ |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup DMA_LL_Exported_Constants DMA Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup DMA_LL_EC_STREAM STREAM |
| * @{ |
| */ |
| #define LL_DMA_STREAM_0 0x00000000U |
| #define LL_DMA_STREAM_1 0x00000001U |
| #define LL_DMA_STREAM_2 0x00000002U |
| #define LL_DMA_STREAM_3 0x00000003U |
| #define LL_DMA_STREAM_4 0x00000004U |
| #define LL_DMA_STREAM_5 0x00000005U |
| #define LL_DMA_STREAM_6 0x00000006U |
| #define LL_DMA_STREAM_7 0x00000007U |
| #define LL_DMA_STREAM_ALL 0xFFFF0000U |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_DIRECTION DIRECTION |
| * @{ |
| */ |
| #define LL_DMA_DIRECTION_PERIPH_TO_MEMORY 0x00000000U /*!< Peripheral to memory direction */ |
| #define LL_DMA_DIRECTION_MEMORY_TO_PERIPH DMA_SxCR_DIR_0 /*!< Memory to peripheral direction */ |
| #define LL_DMA_DIRECTION_MEMORY_TO_MEMORY DMA_SxCR_DIR_1 /*!< Memory to memory direction */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_MODE MODE |
| * @{ |
| */ |
| #define LL_DMA_MODE_NORMAL 0x00000000U /*!< Normal Mode */ |
| #define LL_DMA_MODE_CIRCULAR DMA_SxCR_CIRC /*!< Circular Mode */ |
| #define LL_DMA_MODE_PFCTRL DMA_SxCR_PFCTRL /*!< Peripheral flow control mode */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_DOUBLEBUFFER_MODE DOUBLE BUFFER MODE |
| * @{ |
| */ |
| #define LL_DMA_DOUBLEBUFFER_MODE_DISABLE 0x00000000U /*!< Disable double buffering mode */ |
| #define LL_DMA_DOUBLEBUFFER_MODE_ENABLE DMA_SxCR_DBM /*!< Enable double buffering mode */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_PERIPH PERIPH |
| * @{ |
| */ |
| #define LL_DMA_PERIPH_NOINCREMENT 0x00000000U /*!< Peripheral increment mode Disable */ |
| #define LL_DMA_PERIPH_INCREMENT DMA_SxCR_PINC /*!< Peripheral increment mode Enable */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_MEMORY MEMORY |
| * @{ |
| */ |
| #define LL_DMA_MEMORY_NOINCREMENT 0x00000000U /*!< Memory increment mode Disable */ |
| #define LL_DMA_MEMORY_INCREMENT DMA_SxCR_MINC /*!< Memory increment mode Enable */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_PDATAALIGN PDATAALIGN |
| * @{ |
| */ |
| #define LL_DMA_PDATAALIGN_BYTE 0x00000000U /*!< Peripheral data alignment : Byte */ |
| #define LL_DMA_PDATAALIGN_HALFWORD DMA_SxCR_PSIZE_0 /*!< Peripheral data alignment : HalfWord */ |
| #define LL_DMA_PDATAALIGN_WORD DMA_SxCR_PSIZE_1 /*!< Peripheral data alignment : Word */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_MDATAALIGN MDATAALIGN |
| * @{ |
| */ |
| #define LL_DMA_MDATAALIGN_BYTE 0x00000000U /*!< Memory data alignment : Byte */ |
| #define LL_DMA_MDATAALIGN_HALFWORD DMA_SxCR_MSIZE_0 /*!< Memory data alignment : HalfWord */ |
| #define LL_DMA_MDATAALIGN_WORD DMA_SxCR_MSIZE_1 /*!< Memory data alignment : Word */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_OFFSETSIZE OFFSETSIZE |
| * @{ |
| */ |
| #define LL_DMA_OFFSETSIZE_PSIZE 0x00000000U /*!< Peripheral increment offset size is linked to the PSIZE */ |
| #define LL_DMA_OFFSETSIZE_FIXEDTO4 DMA_SxCR_PINCOS /*!< Peripheral increment offset size is fixed to 4 (32-bit alignment) */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_PRIORITY PRIORITY |
| * @{ |
| */ |
| #define LL_DMA_PRIORITY_LOW 0x00000000U /*!< Priority level : Low */ |
| #define LL_DMA_PRIORITY_MEDIUM DMA_SxCR_PL_0 /*!< Priority level : Medium */ |
| #define LL_DMA_PRIORITY_HIGH DMA_SxCR_PL_1 /*!< Priority level : High */ |
| #define LL_DMA_PRIORITY_VERYHIGH DMA_SxCR_PL /*!< Priority level : Very_High */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_CHANNEL CHANNEL |
| * @{ |
| */ |
| #define LL_DMA_CHANNEL_0 0x00000000U /* Select Channel0 of DMA Instance */ |
| #define LL_DMA_CHANNEL_1 DMA_SxCR_CHSEL_0 /* Select Channel1 of DMA Instance */ |
| #define LL_DMA_CHANNEL_2 DMA_SxCR_CHSEL_1 /* Select Channel2 of DMA Instance */ |
| #define LL_DMA_CHANNEL_3 (DMA_SxCR_CHSEL_0 | DMA_SxCR_CHSEL_1) /* Select Channel3 of DMA Instance */ |
| #define LL_DMA_CHANNEL_4 DMA_SxCR_CHSEL_2 /* Select Channel4 of DMA Instance */ |
| #define LL_DMA_CHANNEL_5 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_0) /* Select Channel5 of DMA Instance */ |
| #define LL_DMA_CHANNEL_6 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1) /* Select Channel6 of DMA Instance */ |
| #define LL_DMA_CHANNEL_7 (DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel7 of DMA Instance */ |
| #if defined(DMA_CHANNEL_SELECTION_8_15) |
| #define LL_DMA_CHANNEL_8 DMA_SxCR_CHSEL_3 /* Select Channel8 of DMA Instance */ |
| #define LL_DMA_CHANNEL_9 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_0) /* Select Channel9 of DMA Instance */ |
| #define LL_DMA_CHANNEL_10 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_1) /* Select Channel10 of DMA Instance */ |
| #define LL_DMA_CHANNEL_11 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_1 | DMA_SxCR_CHSEL_0) /* Select Channel11 of DMA Instance */ |
| #define LL_DMA_CHANNEL_12 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2) /* Select Channel12 of DMA Instance */ |
| #define LL_DMA_CHANNEL_13 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_0) /* Select Channel13 of DMA Instance */ |
| #define LL_DMA_CHANNEL_14 (DMA_SxCR_CHSEL_3 | DMA_SxCR_CHSEL_2 | DMA_SxCR_CHSEL_1) /* Select Channel14 of DMA Instance */ |
| #define LL_DMA_CHANNEL_15 DMA_SxCR_CHSEL /* Select Channel15 of DMA Instance */ |
| #endif /* DMA_CHANNEL_SELECTION_8_15 */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_MBURST MBURST |
| * @{ |
| */ |
| #define LL_DMA_MBURST_SINGLE 0x00000000U /*!< Memory burst single transfer configuration */ |
| #define LL_DMA_MBURST_INC4 DMA_SxCR_MBURST_0 /*!< Memory burst of 4 beats transfer configuration */ |
| #define LL_DMA_MBURST_INC8 DMA_SxCR_MBURST_1 /*!< Memory burst of 8 beats transfer configuration */ |
| #define LL_DMA_MBURST_INC16 (DMA_SxCR_MBURST_0 | DMA_SxCR_MBURST_1) /*!< Memory burst of 16 beats transfer configuration */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_PBURST PBURST |
| * @{ |
| */ |
| #define LL_DMA_PBURST_SINGLE 0x00000000U /*!< Peripheral burst single transfer configuration */ |
| #define LL_DMA_PBURST_INC4 DMA_SxCR_PBURST_0 /*!< Peripheral burst of 4 beats transfer configuration */ |
| #define LL_DMA_PBURST_INC8 DMA_SxCR_PBURST_1 /*!< Peripheral burst of 8 beats transfer configuration */ |
| #define LL_DMA_PBURST_INC16 (DMA_SxCR_PBURST_0 | DMA_SxCR_PBURST_1) /*!< Peripheral burst of 16 beats transfer configuration */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_FIFOMODE DMA_LL_FIFOMODE |
| * @{ |
| */ |
| #define LL_DMA_FIFOMODE_DISABLE 0x00000000U /*!< FIFO mode disable (direct mode is enabled) */ |
| #define LL_DMA_FIFOMODE_ENABLE DMA_SxFCR_DMDIS /*!< FIFO mode enable */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_FIFOSTATUS_0 FIFOSTATUS 0 |
| * @{ |
| */ |
| #define LL_DMA_FIFOSTATUS_0_25 0x00000000U /*!< 0 < fifo_level < 1/4 */ |
| #define LL_DMA_FIFOSTATUS_25_50 DMA_SxFCR_FS_0 /*!< 1/4 < fifo_level < 1/2 */ |
| #define LL_DMA_FIFOSTATUS_50_75 DMA_SxFCR_FS_1 /*!< 1/2 < fifo_level < 3/4 */ |
| #define LL_DMA_FIFOSTATUS_75_100 (DMA_SxFCR_FS_1 | DMA_SxFCR_FS_0) /*!< 3/4 < fifo_level < full */ |
| #define LL_DMA_FIFOSTATUS_EMPTY DMA_SxFCR_FS_2 /*!< FIFO is empty */ |
| #define LL_DMA_FIFOSTATUS_FULL (DMA_SxFCR_FS_2 | DMA_SxFCR_FS_0) /*!< FIFO is full */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_FIFOTHRESHOLD FIFOTHRESHOLD |
| * @{ |
| */ |
| #define LL_DMA_FIFOTHRESHOLD_1_4 0x00000000U /*!< FIFO threshold 1 quart full configuration */ |
| #define LL_DMA_FIFOTHRESHOLD_1_2 DMA_SxFCR_FTH_0 /*!< FIFO threshold half full configuration */ |
| #define LL_DMA_FIFOTHRESHOLD_3_4 DMA_SxFCR_FTH_1 /*!< FIFO threshold 3 quarts full configuration */ |
| #define LL_DMA_FIFOTHRESHOLD_FULL DMA_SxFCR_FTH /*!< FIFO threshold full configuration */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EC_CURRENTTARGETMEM CURRENTTARGETMEM |
| * @{ |
| */ |
| #define LL_DMA_CURRENTTARGETMEM0 0x00000000U /*!< Set CurrentTarget Memory to Memory 0 */ |
| #define LL_DMA_CURRENTTARGETMEM1 DMA_SxCR_CT /*!< Set CurrentTarget Memory to Memory 1 */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macro ------------------------------------------------------------*/ |
| /** @defgroup DMA_LL_Exported_Macros DMA Exported Macros |
| * @{ |
| */ |
| |
| /** @defgroup DMA_LL_EM_WRITE_READ Common Write and read registers macros |
| * @{ |
| */ |
| /** |
| * @brief Write a value in DMA register |
| * @param __INSTANCE__ DMA Instance |
| * @param __REG__ Register to be written |
| * @param __VALUE__ Value to be written in the register |
| * @retval None |
| */ |
| #define LL_DMA_WriteReg(__INSTANCE__, __REG__, __VALUE__) WRITE_REG(__INSTANCE__->__REG__, (__VALUE__)) |
| |
| /** |
| * @brief Read a value in DMA register |
| * @param __INSTANCE__ DMA Instance |
| * @param __REG__ Register to be read |
| * @retval Register value |
| */ |
| #define LL_DMA_ReadReg(__INSTANCE__, __REG__) READ_REG(__INSTANCE__->__REG__) |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EM_CONVERT_DMAxCHANNELy Convert DMAxStreamy |
| * @{ |
| */ |
| /** |
| * @brief Convert DMAx_Streamy into DMAx |
| * @param __STREAM_INSTANCE__ DMAx_Streamy |
| * @retval DMAx |
| */ |
| #define __LL_DMA_GET_INSTANCE(__STREAM_INSTANCE__) \ |
| (((uint32_t)(__STREAM_INSTANCE__) > ((uint32_t)DMA1_Stream7)) ? DMA2 : DMA1) |
| |
| /** |
| * @brief Convert DMAx_Streamy into LL_DMA_STREAM_y |
| * @param __STREAM_INSTANCE__ DMAx_Streamy |
| * @retval LL_DMA_CHANNEL_y |
| */ |
| #define __LL_DMA_GET_STREAM(__STREAM_INSTANCE__) \ |
| (((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream0)) ? LL_DMA_STREAM_0 : \ |
| ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream0)) ? LL_DMA_STREAM_0 : \ |
| ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream1)) ? LL_DMA_STREAM_1 : \ |
| ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream1)) ? LL_DMA_STREAM_1 : \ |
| ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream2)) ? LL_DMA_STREAM_2 : \ |
| ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream2)) ? LL_DMA_STREAM_2 : \ |
| ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream3)) ? LL_DMA_STREAM_3 : \ |
| ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream3)) ? LL_DMA_STREAM_3 : \ |
| ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream4)) ? LL_DMA_STREAM_4 : \ |
| ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream4)) ? LL_DMA_STREAM_4 : \ |
| ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream5)) ? LL_DMA_STREAM_5 : \ |
| ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream5)) ? LL_DMA_STREAM_5 : \ |
| ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA1_Stream6)) ? LL_DMA_STREAM_6 : \ |
| ((uint32_t)(__STREAM_INSTANCE__) == ((uint32_t)DMA2_Stream6)) ? LL_DMA_STREAM_6 : \ |
| LL_DMA_STREAM_7) |
| |
| /** |
| * @brief Convert DMA Instance DMAx and LL_DMA_STREAM_y into DMAx_Streamy |
| * @param __DMA_INSTANCE__ DMAx |
| * @param __STREAM__ LL_DMA_STREAM_y |
| * @retval DMAx_Streamy |
| */ |
| #define __LL_DMA_GET_STREAM_INSTANCE(__DMA_INSTANCE__, __STREAM__) \ |
| ((((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_0))) ? DMA1_Stream0 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_0))) ? DMA2_Stream0 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_1))) ? DMA1_Stream1 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_1))) ? DMA2_Stream1 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_2))) ? DMA1_Stream2 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_2))) ? DMA2_Stream2 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_3))) ? DMA1_Stream3 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_3))) ? DMA2_Stream3 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_4))) ? DMA1_Stream4 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_4))) ? DMA2_Stream4 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_5))) ? DMA1_Stream5 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_5))) ? DMA2_Stream5 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_6))) ? DMA1_Stream6 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA2)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_6))) ? DMA2_Stream6 : \ |
| (((uint32_t)(__DMA_INSTANCE__) == ((uint32_t)DMA1)) && ((uint32_t)(__STREAM__) == ((uint32_t)LL_DMA_STREAM_7))) ? DMA1_Stream7 : \ |
| DMA2_Stream7) |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @defgroup DMA_LL_Exported_Functions DMA Exported Functions |
| * @{ |
| */ |
| |
| /** @defgroup DMA_LL_EF_Configuration Configuration |
| * @{ |
| */ |
| /** |
| * @brief Enable DMA stream. |
| * @rmtoll CR EN LL_DMA_EnableStream |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_EnableStream(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_EN); |
| } |
| |
| /** |
| * @brief Disable DMA stream. |
| * @rmtoll CR EN LL_DMA_DisableStream |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_DisableStream(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_EN); |
| } |
| |
| /** |
| * @brief Check if DMA stream is enabled or disabled. |
| * @rmtoll CR EN LL_DMA_IsEnabledStream |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsEnabledStream(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_EN) == (DMA_SxCR_EN)); |
| } |
| |
| /** |
| * @brief Configure all parameters linked to DMA transfer. |
| * @rmtoll CR DIR LL_DMA_ConfigTransfer\n |
| * CR CIRC LL_DMA_ConfigTransfer\n |
| * CR PINC LL_DMA_ConfigTransfer\n |
| * CR MINC LL_DMA_ConfigTransfer\n |
| * CR PSIZE LL_DMA_ConfigTransfer\n |
| * CR MSIZE LL_DMA_ConfigTransfer\n |
| * CR PL LL_DMA_ConfigTransfer\n |
| * CR PFCTRL LL_DMA_ConfigTransfer |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param Configuration This parameter must be a combination of all the following values: |
| * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY or @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH or @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY |
| * @arg @ref LL_DMA_MODE_NORMAL or @ref LL_DMA_MODE_CIRCULAR or @ref LL_DMA_MODE_PFCTRL |
| * @arg @ref LL_DMA_PERIPH_INCREMENT or @ref LL_DMA_PERIPH_NOINCREMENT |
| * @arg @ref LL_DMA_MEMORY_INCREMENT or @ref LL_DMA_MEMORY_NOINCREMENT |
| * @arg @ref LL_DMA_PDATAALIGN_BYTE or @ref LL_DMA_PDATAALIGN_HALFWORD or @ref LL_DMA_PDATAALIGN_WORD |
| * @arg @ref LL_DMA_MDATAALIGN_BYTE or @ref LL_DMA_MDATAALIGN_HALFWORD or @ref LL_DMA_MDATAALIGN_WORD |
| * @arg @ref LL_DMA_PRIORITY_LOW or @ref LL_DMA_PRIORITY_MEDIUM or @ref LL_DMA_PRIORITY_HIGH or @ref LL_DMA_PRIORITY_VERYHIGH |
| *@retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ConfigTransfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Configuration) |
| { |
| MODIFY_REG(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, |
| DMA_SxCR_DIR | DMA_SxCR_CIRC | DMA_SxCR_PINC | DMA_SxCR_MINC | DMA_SxCR_PSIZE | DMA_SxCR_MSIZE | DMA_SxCR_PL | DMA_SxCR_PFCTRL, |
| Configuration); |
| } |
| |
| /** |
| * @brief Set Data transfer direction (read from peripheral or from memory). |
| * @rmtoll CR DIR LL_DMA_SetDataTransferDirection |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param Direction This parameter can be one of the following values: |
| * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY |
| * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH |
| * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Direction) |
| { |
| MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DIR, Direction); |
| } |
| |
| /** |
| * @brief Get Data transfer direction (read from peripheral or from memory). |
| * @rmtoll CR DIR LL_DMA_GetDataTransferDirection |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY |
| * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH |
| * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetDataTransferDirection(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DIR)); |
| } |
| |
| /** |
| * @brief Set DMA mode normal, circular or peripheral flow control. |
| * @rmtoll CR CIRC LL_DMA_SetMode\n |
| * CR PFCTRL LL_DMA_SetMode |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param Mode This parameter can be one of the following values: |
| * @arg @ref LL_DMA_MODE_NORMAL |
| * @arg @ref LL_DMA_MODE_CIRCULAR |
| * @arg @ref LL_DMA_MODE_PFCTRL |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Mode) |
| { |
| MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CIRC | DMA_SxCR_PFCTRL, Mode); |
| } |
| |
| /** |
| * @brief Get DMA mode normal, circular or peripheral flow control. |
| * @rmtoll CR CIRC LL_DMA_GetMode\n |
| * CR PFCTRL LL_DMA_GetMode |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_MODE_NORMAL |
| * @arg @ref LL_DMA_MODE_CIRCULAR |
| * @arg @ref LL_DMA_MODE_PFCTRL |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetMode(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CIRC | DMA_SxCR_PFCTRL)); |
| } |
| |
| /** |
| * @brief Set Peripheral increment mode. |
| * @rmtoll CR PINC LL_DMA_SetPeriphIncMode |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param IncrementMode This parameter can be one of the following values: |
| * @arg @ref LL_DMA_PERIPH_NOINCREMENT |
| * @arg @ref LL_DMA_PERIPH_INCREMENT |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t IncrementMode) |
| { |
| MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINC, IncrementMode); |
| } |
| |
| /** |
| * @brief Get Peripheral increment mode. |
| * @rmtoll CR PINC LL_DMA_GetPeriphIncMode |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_PERIPH_NOINCREMENT |
| * @arg @ref LL_DMA_PERIPH_INCREMENT |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetPeriphIncMode(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINC)); |
| } |
| |
| /** |
| * @brief Set Memory increment mode. |
| * @rmtoll CR MINC LL_DMA_SetMemoryIncMode |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param IncrementMode This parameter can be one of the following values: |
| * @arg @ref LL_DMA_MEMORY_NOINCREMENT |
| * @arg @ref LL_DMA_MEMORY_INCREMENT |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t IncrementMode) |
| { |
| MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MINC, IncrementMode); |
| } |
| |
| /** |
| * @brief Get Memory increment mode. |
| * @rmtoll CR MINC LL_DMA_GetMemoryIncMode |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_MEMORY_NOINCREMENT |
| * @arg @ref LL_DMA_MEMORY_INCREMENT |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetMemoryIncMode(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MINC)); |
| } |
| |
| /** |
| * @brief Set Peripheral size. |
| * @rmtoll CR PSIZE LL_DMA_SetPeriphSize |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param Size This parameter can be one of the following values: |
| * @arg @ref LL_DMA_PDATAALIGN_BYTE |
| * @arg @ref LL_DMA_PDATAALIGN_HALFWORD |
| * @arg @ref LL_DMA_PDATAALIGN_WORD |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetPeriphSize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Size) |
| { |
| MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PSIZE, Size); |
| } |
| |
| /** |
| * @brief Get Peripheral size. |
| * @rmtoll CR PSIZE LL_DMA_GetPeriphSize |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_PDATAALIGN_BYTE |
| * @arg @ref LL_DMA_PDATAALIGN_HALFWORD |
| * @arg @ref LL_DMA_PDATAALIGN_WORD |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetPeriphSize(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PSIZE)); |
| } |
| |
| /** |
| * @brief Set Memory size. |
| * @rmtoll CR MSIZE LL_DMA_SetMemorySize |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param Size This parameter can be one of the following values: |
| * @arg @ref LL_DMA_MDATAALIGN_BYTE |
| * @arg @ref LL_DMA_MDATAALIGN_HALFWORD |
| * @arg @ref LL_DMA_MDATAALIGN_WORD |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetMemorySize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Size) |
| { |
| MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MSIZE, Size); |
| } |
| |
| /** |
| * @brief Get Memory size. |
| * @rmtoll CR MSIZE LL_DMA_GetMemorySize |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_MDATAALIGN_BYTE |
| * @arg @ref LL_DMA_MDATAALIGN_HALFWORD |
| * @arg @ref LL_DMA_MDATAALIGN_WORD |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetMemorySize(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MSIZE)); |
| } |
| |
| /** |
| * @brief Set Peripheral increment offset size. |
| * @rmtoll CR PINCOS LL_DMA_SetIncOffsetSize |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param OffsetSize This parameter can be one of the following values: |
| * @arg @ref LL_DMA_OFFSETSIZE_PSIZE |
| * @arg @ref LL_DMA_OFFSETSIZE_FIXEDTO4 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetIncOffsetSize(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t OffsetSize) |
| { |
| MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINCOS, OffsetSize); |
| } |
| |
| /** |
| * @brief Get Peripheral increment offset size. |
| * @rmtoll CR PINCOS LL_DMA_GetIncOffsetSize |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_OFFSETSIZE_PSIZE |
| * @arg @ref LL_DMA_OFFSETSIZE_FIXEDTO4 |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetIncOffsetSize(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PINCOS)); |
| } |
| |
| /** |
| * @brief Set Stream priority level. |
| * @rmtoll CR PL LL_DMA_SetStreamPriorityLevel |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param Priority This parameter can be one of the following values: |
| * @arg @ref LL_DMA_PRIORITY_LOW |
| * @arg @ref LL_DMA_PRIORITY_MEDIUM |
| * @arg @ref LL_DMA_PRIORITY_HIGH |
| * @arg @ref LL_DMA_PRIORITY_VERYHIGH |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetStreamPriorityLevel(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Priority) |
| { |
| MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PL, Priority); |
| } |
| |
| /** |
| * @brief Get Stream priority level. |
| * @rmtoll CR PL LL_DMA_GetStreamPriorityLevel |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_PRIORITY_LOW |
| * @arg @ref LL_DMA_PRIORITY_MEDIUM |
| * @arg @ref LL_DMA_PRIORITY_HIGH |
| * @arg @ref LL_DMA_PRIORITY_VERYHIGH |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetStreamPriorityLevel(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PL)); |
| } |
| |
| /** |
| * @brief Set Number of data to transfer. |
| * @rmtoll NDTR NDT LL_DMA_SetDataLength |
| * @note This action has no effect if |
| * stream is enabled. |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param NbData Between 0 to 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetDataLength(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t NbData) |
| { |
| MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->NDTR, DMA_SxNDT, NbData); |
| } |
| |
| /** |
| * @brief Get Number of data to transfer. |
| * @rmtoll NDTR NDT LL_DMA_GetDataLength |
| * @note Once the stream is enabled, the return value indicate the |
| * remaining bytes to be transmitted. |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Between 0 to 0xFFFFFFFF |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetDataLength(DMA_TypeDef* DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->NDTR, DMA_SxNDT)); |
| } |
| |
| /** |
| * @brief Select Channel number associated to the Stream. |
| * @rmtoll CR CHSEL LL_DMA_SetChannelSelection |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param Channel This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_0 |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * @arg @ref LL_DMA_CHANNEL_9 (*) |
| * @arg @ref LL_DMA_CHANNEL_10 (*) |
| * @arg @ref LL_DMA_CHANNEL_11 (*) |
| * @arg @ref LL_DMA_CHANNEL_12 (*) |
| * @arg @ref LL_DMA_CHANNEL_13 (*) |
| * @arg @ref LL_DMA_CHANNEL_14 (*) |
| * @arg @ref LL_DMA_CHANNEL_15 (*) |
| * |
| * (*) value not defined in all devices. |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetChannelSelection(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Channel) |
| { |
| MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CHSEL, Channel); |
| } |
| |
| /** |
| * @brief Get the Channel number associated to the Stream. |
| * @rmtoll CR CHSEL LL_DMA_GetChannelSelection |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_CHANNEL_0 |
| * @arg @ref LL_DMA_CHANNEL_1 |
| * @arg @ref LL_DMA_CHANNEL_2 |
| * @arg @ref LL_DMA_CHANNEL_3 |
| * @arg @ref LL_DMA_CHANNEL_4 |
| * @arg @ref LL_DMA_CHANNEL_5 |
| * @arg @ref LL_DMA_CHANNEL_6 |
| * @arg @ref LL_DMA_CHANNEL_7 |
| * @arg @ref LL_DMA_CHANNEL_8 (*) |
| * @arg @ref LL_DMA_CHANNEL_9 (*) |
| * @arg @ref LL_DMA_CHANNEL_10 (*) |
| * @arg @ref LL_DMA_CHANNEL_11 (*) |
| * @arg @ref LL_DMA_CHANNEL_12 (*) |
| * @arg @ref LL_DMA_CHANNEL_13 (*) |
| * @arg @ref LL_DMA_CHANNEL_14 (*) |
| * @arg @ref LL_DMA_CHANNEL_15 (*) |
| * |
| * (*) value not defined in all devices. |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetChannelSelection(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CHSEL)); |
| } |
| |
| /** |
| * @brief Set Memory burst transfer configuration. |
| * @rmtoll CR MBURST LL_DMA_SetMemoryBurstxfer |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param Mburst This parameter can be one of the following values: |
| * @arg @ref LL_DMA_MBURST_SINGLE |
| * @arg @ref LL_DMA_MBURST_INC4 |
| * @arg @ref LL_DMA_MBURST_INC8 |
| * @arg @ref LL_DMA_MBURST_INC16 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetMemoryBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Mburst) |
| { |
| MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MBURST, Mburst); |
| } |
| |
| /** |
| * @brief Get Memory burst transfer configuration. |
| * @rmtoll CR MBURST LL_DMA_GetMemoryBurstxfer |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_MBURST_SINGLE |
| * @arg @ref LL_DMA_MBURST_INC4 |
| * @arg @ref LL_DMA_MBURST_INC8 |
| * @arg @ref LL_DMA_MBURST_INC16 |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetMemoryBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_MBURST)); |
| } |
| |
| /** |
| * @brief Set Peripheral burst transfer configuration. |
| * @rmtoll CR PBURST LL_DMA_SetPeriphBurstxfer |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param Pburst This parameter can be one of the following values: |
| * @arg @ref LL_DMA_PBURST_SINGLE |
| * @arg @ref LL_DMA_PBURST_INC4 |
| * @arg @ref LL_DMA_PBURST_INC8 |
| * @arg @ref LL_DMA_PBURST_INC16 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetPeriphBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Pburst) |
| { |
| MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PBURST, Pburst); |
| } |
| |
| /** |
| * @brief Get Peripheral burst transfer configuration. |
| * @rmtoll CR PBURST LL_DMA_GetPeriphBurstxfer |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_PBURST_SINGLE |
| * @arg @ref LL_DMA_PBURST_INC4 |
| * @arg @ref LL_DMA_PBURST_INC8 |
| * @arg @ref LL_DMA_PBURST_INC16 |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetPeriphBurstxfer(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_PBURST)); |
| } |
| |
| /** |
| * @brief Set Current target (only in double buffer mode) to Memory 1 or Memory 0. |
| * @rmtoll CR CT LL_DMA_SetCurrentTargetMem |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param CurrentMemory This parameter can be one of the following values: |
| * @arg @ref LL_DMA_CURRENTTARGETMEM0 |
| * @arg @ref LL_DMA_CURRENTTARGETMEM1 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetCurrentTargetMem(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t CurrentMemory) |
| { |
| MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CT, CurrentMemory); |
| } |
| |
| /** |
| * @brief Set Current target (only in double buffer mode) to Memory 1 or Memory 0. |
| * @rmtoll CR CT LL_DMA_GetCurrentTargetMem |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_CURRENTTARGETMEM0 |
| * @arg @ref LL_DMA_CURRENTTARGETMEM1 |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetCurrentTargetMem(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_CT)); |
| } |
| |
| /** |
| * @brief Enable the double buffer mode. |
| * @rmtoll CR DBM LL_DMA_EnableDoubleBufferMode |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_EnableDoubleBufferMode(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DBM); |
| } |
| |
| /** |
| * @brief Disable the double buffer mode. |
| * @rmtoll CR DBM LL_DMA_DisableDoubleBufferMode |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_DisableDoubleBufferMode(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DBM); |
| } |
| |
| /** |
| * @brief Get FIFO status. |
| * @rmtoll FCR FS LL_DMA_GetFIFOStatus |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_FIFOSTATUS_0_25 |
| * @arg @ref LL_DMA_FIFOSTATUS_25_50 |
| * @arg @ref LL_DMA_FIFOSTATUS_50_75 |
| * @arg @ref LL_DMA_FIFOSTATUS_75_100 |
| * @arg @ref LL_DMA_FIFOSTATUS_EMPTY |
| * @arg @ref LL_DMA_FIFOSTATUS_FULL |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetFIFOStatus(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FS)); |
| } |
| |
| /** |
| * @brief Disable Fifo mode. |
| * @rmtoll FCR DMDIS LL_DMA_DisableFifoMode |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_DisableFifoMode(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_DMDIS); |
| } |
| |
| /** |
| * @brief Enable Fifo mode. |
| * @rmtoll FCR DMDIS LL_DMA_EnableFifoMode |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_EnableFifoMode(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_DMDIS); |
| } |
| |
| /** |
| * @brief Select FIFO threshold. |
| * @rmtoll FCR FTH LL_DMA_SetFIFOThreshold |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param Threshold This parameter can be one of the following values: |
| * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 |
| * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 |
| * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 |
| * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetFIFOThreshold(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Threshold) |
| { |
| MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FTH, Threshold); |
| } |
| |
| /** |
| * @brief Get FIFO threshold. |
| * @rmtoll FCR FTH LL_DMA_GetFIFOThreshold |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Returned value can be one of the following values: |
| * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 |
| * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 |
| * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 |
| * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetFIFOThreshold(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FTH)); |
| } |
| |
| /** |
| * @brief Configure the FIFO . |
| * @rmtoll FCR FTH LL_DMA_ConfigFifo\n |
| * FCR DMDIS LL_DMA_ConfigFifo |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param FifoMode This parameter can be one of the following values: |
| * @arg @ref LL_DMA_FIFOMODE_ENABLE |
| * @arg @ref LL_DMA_FIFOMODE_DISABLE |
| * @param FifoThreshold This parameter can be one of the following values: |
| * @arg @ref LL_DMA_FIFOTHRESHOLD_1_4 |
| * @arg @ref LL_DMA_FIFOTHRESHOLD_1_2 |
| * @arg @ref LL_DMA_FIFOTHRESHOLD_3_4 |
| * @arg @ref LL_DMA_FIFOTHRESHOLD_FULL |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ConfigFifo(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t FifoMode, uint32_t FifoThreshold) |
| { |
| MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FTH|DMA_SxFCR_DMDIS, FifoMode|FifoThreshold); |
| } |
| |
| /** |
| * @brief Configure the Source and Destination addresses. |
| * @note This API must not be called when the DMA stream is enabled. |
| * @rmtoll M0AR M0A LL_DMA_ConfigAddresses\n |
| * PAR PA LL_DMA_ConfigAddresses |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param SrcAddress Between 0 to 0xFFFFFFFF |
| * @param DstAddress Between 0 to 0xFFFFFFFF |
| * @param Direction This parameter can be one of the following values: |
| * @arg @ref LL_DMA_DIRECTION_PERIPH_TO_MEMORY |
| * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_PERIPH |
| * @arg @ref LL_DMA_DIRECTION_MEMORY_TO_MEMORY |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ConfigAddresses(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t SrcAddress, uint32_t DstAddress, uint32_t Direction) |
| { |
| /* Direction Memory to Periph */ |
| if (Direction == LL_DMA_DIRECTION_MEMORY_TO_PERIPH) |
| { |
| WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, SrcAddress); |
| WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, DstAddress); |
| } |
| /* Direction Periph to Memory and Memory to Memory */ |
| else |
| { |
| WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, SrcAddress); |
| WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, DstAddress); |
| } |
| } |
| |
| /** |
| * @brief Set the Memory address. |
| * @rmtoll M0AR M0A LL_DMA_SetMemoryAddress |
| * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. |
| * @note This API must not be called when the DMA channel is enabled. |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param MemoryAddress Between 0 to 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetMemoryAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t MemoryAddress) |
| { |
| WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, MemoryAddress); |
| } |
| |
| /** |
| * @brief Set the Peripheral address. |
| * @rmtoll PAR PA LL_DMA_SetPeriphAddress |
| * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. |
| * @note This API must not be called when the DMA channel is enabled. |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param PeriphAddress Between 0 to 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetPeriphAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t PeriphAddress) |
| { |
| WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, PeriphAddress); |
| } |
| |
| /** |
| * @brief Get the Memory address. |
| * @rmtoll M0AR M0A LL_DMA_GetMemoryAddress |
| * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Between 0 to 0xFFFFFFFF |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetMemoryAddress(DMA_TypeDef* DMAx, uint32_t Stream) |
| { |
| return (READ_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR)); |
| } |
| |
| /** |
| * @brief Get the Peripheral address. |
| * @rmtoll PAR PA LL_DMA_GetPeriphAddress |
| * @note Interface used for direction LL_DMA_DIRECTION_PERIPH_TO_MEMORY or LL_DMA_DIRECTION_MEMORY_TO_PERIPH only. |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Between 0 to 0xFFFFFFFF |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetPeriphAddress(DMA_TypeDef* DMAx, uint32_t Stream) |
| { |
| return (READ_REG(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR)); |
| } |
| |
| /** |
| * @brief Set the Memory to Memory Source address. |
| * @rmtoll PAR PA LL_DMA_SetM2MSrcAddress |
| * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. |
| * @note This API must not be called when the DMA channel is enabled. |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param MemoryAddress Between 0 to 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetM2MSrcAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t MemoryAddress) |
| { |
| WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR, MemoryAddress); |
| } |
| |
| /** |
| * @brief Set the Memory to Memory Destination address. |
| * @rmtoll M0AR M0A LL_DMA_SetM2MDstAddress |
| * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. |
| * @note This API must not be called when the DMA channel is enabled. |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param MemoryAddress Between 0 to 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetM2MDstAddress(DMA_TypeDef* DMAx, uint32_t Stream, uint32_t MemoryAddress) |
| { |
| WRITE_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR, MemoryAddress); |
| } |
| |
| /** |
| * @brief Get the Memory to Memory Source address. |
| * @rmtoll PAR PA LL_DMA_GetM2MSrcAddress |
| * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Between 0 to 0xFFFFFFFF |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetM2MSrcAddress(DMA_TypeDef* DMAx, uint32_t Stream) |
| { |
| return (READ_REG(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->PAR)); |
| } |
| |
| /** |
| * @brief Get the Memory to Memory Destination address. |
| * @rmtoll M0AR M0A LL_DMA_GetM2MDstAddress |
| * @note Interface used for direction LL_DMA_DIRECTION_MEMORY_TO_MEMORY only. |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Between 0 to 0xFFFFFFFF |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetM2MDstAddress(DMA_TypeDef* DMAx, uint32_t Stream) |
| { |
| return (READ_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M0AR)); |
| } |
| |
| /** |
| * @brief Set Memory 1 address (used in case of Double buffer mode). |
| * @rmtoll M1AR M1A LL_DMA_SetMemory1Address |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @param Address Between 0 to 0xFFFFFFFF |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_SetMemory1Address(DMA_TypeDef *DMAx, uint32_t Stream, uint32_t Address) |
| { |
| MODIFY_REG(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M1AR, DMA_SxM1AR_M1A, Address); |
| } |
| |
| /** |
| * @brief Get Memory 1 address (used in case of Double buffer mode). |
| * @rmtoll M1AR M1A LL_DMA_GetMemory1Address |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval Between 0 to 0xFFFFFFFF |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_GetMemory1Address(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->M1AR); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EF_FLAG_Management FLAG_Management |
| * @{ |
| */ |
| |
| /** |
| * @brief Get Stream 0 half transfer flag. |
| * @rmtoll LISR HTIF0 LL_DMA_IsActiveFlag_HT0 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT0(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF0)==(DMA_LISR_HTIF0)); |
| } |
| |
| /** |
| * @brief Get Stream 1 half transfer flag. |
| * @rmtoll LISR HTIF1 LL_DMA_IsActiveFlag_HT1 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT1(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF1)==(DMA_LISR_HTIF1)); |
| } |
| |
| /** |
| * @brief Get Stream 2 half transfer flag. |
| * @rmtoll LISR HTIF2 LL_DMA_IsActiveFlag_HT2 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT2(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF2)==(DMA_LISR_HTIF2)); |
| } |
| |
| /** |
| * @brief Get Stream 3 half transfer flag. |
| * @rmtoll LISR HTIF3 LL_DMA_IsActiveFlag_HT3 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT3(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_HTIF3)==(DMA_LISR_HTIF3)); |
| } |
| |
| /** |
| * @brief Get Stream 4 half transfer flag. |
| * @rmtoll HISR HTIF4 LL_DMA_IsActiveFlag_HT4 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT4(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF4)==(DMA_HISR_HTIF4)); |
| } |
| |
| /** |
| * @brief Get Stream 5 half transfer flag. |
| * @rmtoll HISR HTIF0 LL_DMA_IsActiveFlag_HT5 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT5(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF5)==(DMA_HISR_HTIF5)); |
| } |
| |
| /** |
| * @brief Get Stream 6 half transfer flag. |
| * @rmtoll HISR HTIF6 LL_DMA_IsActiveFlag_HT6 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT6(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF6)==(DMA_HISR_HTIF6)); |
| } |
| |
| /** |
| * @brief Get Stream 7 half transfer flag. |
| * @rmtoll HISR HTIF7 LL_DMA_IsActiveFlag_HT7 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_HT7(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_HTIF7)==(DMA_HISR_HTIF7)); |
| } |
| |
| /** |
| * @brief Get Stream 0 transfer complete flag. |
| * @rmtoll LISR TCIF0 LL_DMA_IsActiveFlag_TC0 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC0(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF0)==(DMA_LISR_TCIF0)); |
| } |
| |
| /** |
| * @brief Get Stream 1 transfer complete flag. |
| * @rmtoll LISR TCIF1 LL_DMA_IsActiveFlag_TC1 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC1(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF1)==(DMA_LISR_TCIF1)); |
| } |
| |
| /** |
| * @brief Get Stream 2 transfer complete flag. |
| * @rmtoll LISR TCIF2 LL_DMA_IsActiveFlag_TC2 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC2(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF2)==(DMA_LISR_TCIF2)); |
| } |
| |
| /** |
| * @brief Get Stream 3 transfer complete flag. |
| * @rmtoll LISR TCIF3 LL_DMA_IsActiveFlag_TC3 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC3(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_TCIF3)==(DMA_LISR_TCIF3)); |
| } |
| |
| /** |
| * @brief Get Stream 4 transfer complete flag. |
| * @rmtoll HISR TCIF4 LL_DMA_IsActiveFlag_TC4 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC4(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF4)==(DMA_HISR_TCIF4)); |
| } |
| |
| /** |
| * @brief Get Stream 5 transfer complete flag. |
| * @rmtoll HISR TCIF0 LL_DMA_IsActiveFlag_TC5 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC5(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF5)==(DMA_HISR_TCIF5)); |
| } |
| |
| /** |
| * @brief Get Stream 6 transfer complete flag. |
| * @rmtoll HISR TCIF6 LL_DMA_IsActiveFlag_TC6 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC6(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF6)==(DMA_HISR_TCIF6)); |
| } |
| |
| /** |
| * @brief Get Stream 7 transfer complete flag. |
| * @rmtoll HISR TCIF7 LL_DMA_IsActiveFlag_TC7 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TC7(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_TCIF7)==(DMA_HISR_TCIF7)); |
| } |
| |
| /** |
| * @brief Get Stream 0 transfer error flag. |
| * @rmtoll LISR TEIF0 LL_DMA_IsActiveFlag_TE0 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE0(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF0)==(DMA_LISR_TEIF0)); |
| } |
| |
| /** |
| * @brief Get Stream 1 transfer error flag. |
| * @rmtoll LISR TEIF1 LL_DMA_IsActiveFlag_TE1 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE1(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF1)==(DMA_LISR_TEIF1)); |
| } |
| |
| /** |
| * @brief Get Stream 2 transfer error flag. |
| * @rmtoll LISR TEIF2 LL_DMA_IsActiveFlag_TE2 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE2(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF2)==(DMA_LISR_TEIF2)); |
| } |
| |
| /** |
| * @brief Get Stream 3 transfer error flag. |
| * @rmtoll LISR TEIF3 LL_DMA_IsActiveFlag_TE3 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE3(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_TEIF3)==(DMA_LISR_TEIF3)); |
| } |
| |
| /** |
| * @brief Get Stream 4 transfer error flag. |
| * @rmtoll HISR TEIF4 LL_DMA_IsActiveFlag_TE4 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE4(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF4)==(DMA_HISR_TEIF4)); |
| } |
| |
| /** |
| * @brief Get Stream 5 transfer error flag. |
| * @rmtoll HISR TEIF0 LL_DMA_IsActiveFlag_TE5 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE5(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF5)==(DMA_HISR_TEIF5)); |
| } |
| |
| /** |
| * @brief Get Stream 6 transfer error flag. |
| * @rmtoll HISR TEIF6 LL_DMA_IsActiveFlag_TE6 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE6(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF6)==(DMA_HISR_TEIF6)); |
| } |
| |
| /** |
| * @brief Get Stream 7 transfer error flag. |
| * @rmtoll HISR TEIF7 LL_DMA_IsActiveFlag_TE7 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_TE7(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_TEIF7)==(DMA_HISR_TEIF7)); |
| } |
| |
| /** |
| * @brief Get Stream 0 direct mode error flag. |
| * @rmtoll LISR DMEIF0 LL_DMA_IsActiveFlag_DME0 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME0(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF0)==(DMA_LISR_DMEIF0)); |
| } |
| |
| /** |
| * @brief Get Stream 1 direct mode error flag. |
| * @rmtoll LISR DMEIF1 LL_DMA_IsActiveFlag_DME1 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME1(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF1)==(DMA_LISR_DMEIF1)); |
| } |
| |
| /** |
| * @brief Get Stream 2 direct mode error flag. |
| * @rmtoll LISR DMEIF2 LL_DMA_IsActiveFlag_DME2 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME2(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF2)==(DMA_LISR_DMEIF2)); |
| } |
| |
| /** |
| * @brief Get Stream 3 direct mode error flag. |
| * @rmtoll LISR DMEIF3 LL_DMA_IsActiveFlag_DME3 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME3(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_DMEIF3)==(DMA_LISR_DMEIF3)); |
| } |
| |
| /** |
| * @brief Get Stream 4 direct mode error flag. |
| * @rmtoll HISR DMEIF4 LL_DMA_IsActiveFlag_DME4 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME4(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF4)==(DMA_HISR_DMEIF4)); |
| } |
| |
| /** |
| * @brief Get Stream 5 direct mode error flag. |
| * @rmtoll HISR DMEIF0 LL_DMA_IsActiveFlag_DME5 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME5(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF5)==(DMA_HISR_DMEIF5)); |
| } |
| |
| /** |
| * @brief Get Stream 6 direct mode error flag. |
| * @rmtoll HISR DMEIF6 LL_DMA_IsActiveFlag_DME6 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME6(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF6)==(DMA_HISR_DMEIF6)); |
| } |
| |
| /** |
| * @brief Get Stream 7 direct mode error flag. |
| * @rmtoll HISR DMEIF7 LL_DMA_IsActiveFlag_DME7 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_DME7(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_DMEIF7)==(DMA_HISR_DMEIF7)); |
| } |
| |
| /** |
| * @brief Get Stream 0 FIFO error flag. |
| * @rmtoll LISR FEIF0 LL_DMA_IsActiveFlag_FE0 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE0(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF0)==(DMA_LISR_FEIF0)); |
| } |
| |
| /** |
| * @brief Get Stream 1 FIFO error flag. |
| * @rmtoll LISR FEIF1 LL_DMA_IsActiveFlag_FE1 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE1(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF1)==(DMA_LISR_FEIF1)); |
| } |
| |
| /** |
| * @brief Get Stream 2 FIFO error flag. |
| * @rmtoll LISR FEIF2 LL_DMA_IsActiveFlag_FE2 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE2(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF2)==(DMA_LISR_FEIF2)); |
| } |
| |
| /** |
| * @brief Get Stream 3 FIFO error flag. |
| * @rmtoll LISR FEIF3 LL_DMA_IsActiveFlag_FE3 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE3(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->LISR ,DMA_LISR_FEIF3)==(DMA_LISR_FEIF3)); |
| } |
| |
| /** |
| * @brief Get Stream 4 FIFO error flag. |
| * @rmtoll HISR FEIF4 LL_DMA_IsActiveFlag_FE4 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE4(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF4)==(DMA_HISR_FEIF4)); |
| } |
| |
| /** |
| * @brief Get Stream 5 FIFO error flag. |
| * @rmtoll HISR FEIF0 LL_DMA_IsActiveFlag_FE5 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE5(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF5)==(DMA_HISR_FEIF5)); |
| } |
| |
| /** |
| * @brief Get Stream 6 FIFO error flag. |
| * @rmtoll HISR FEIF6 LL_DMA_IsActiveFlag_FE6 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE6(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF6)==(DMA_HISR_FEIF6)); |
| } |
| |
| /** |
| * @brief Get Stream 7 FIFO error flag. |
| * @rmtoll HISR FEIF7 LL_DMA_IsActiveFlag_FE7 |
| * @param DMAx DMAx Instance |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsActiveFlag_FE7(DMA_TypeDef *DMAx) |
| { |
| return (READ_BIT(DMAx->HISR ,DMA_HISR_FEIF7)==(DMA_HISR_FEIF7)); |
| } |
| |
| /** |
| * @brief Clear Stream 0 half transfer flag. |
| * @rmtoll LIFCR CHTIF0 LL_DMA_ClearFlag_HT0 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_HT0(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF0); |
| } |
| |
| /** |
| * @brief Clear Stream 1 half transfer flag. |
| * @rmtoll LIFCR CHTIF1 LL_DMA_ClearFlag_HT1 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_HT1(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF1); |
| } |
| |
| /** |
| * @brief Clear Stream 2 half transfer flag. |
| * @rmtoll LIFCR CHTIF2 LL_DMA_ClearFlag_HT2 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_HT2(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF2); |
| } |
| |
| /** |
| * @brief Clear Stream 3 half transfer flag. |
| * @rmtoll LIFCR CHTIF3 LL_DMA_ClearFlag_HT3 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_HT3(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CHTIF3); |
| } |
| |
| /** |
| * @brief Clear Stream 4 half transfer flag. |
| * @rmtoll HIFCR CHTIF4 LL_DMA_ClearFlag_HT4 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_HT4(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF4); |
| } |
| |
| /** |
| * @brief Clear Stream 5 half transfer flag. |
| * @rmtoll HIFCR CHTIF5 LL_DMA_ClearFlag_HT5 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_HT5(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF5); |
| } |
| |
| /** |
| * @brief Clear Stream 6 half transfer flag. |
| * @rmtoll HIFCR CHTIF6 LL_DMA_ClearFlag_HT6 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_HT6(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF6); |
| } |
| |
| /** |
| * @brief Clear Stream 7 half transfer flag. |
| * @rmtoll HIFCR CHTIF7 LL_DMA_ClearFlag_HT7 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_HT7(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CHTIF7); |
| } |
| |
| /** |
| * @brief Clear Stream 0 transfer complete flag. |
| * @rmtoll LIFCR CTCIF0 LL_DMA_ClearFlag_TC0 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TC0(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF0); |
| } |
| |
| /** |
| * @brief Clear Stream 1 transfer complete flag. |
| * @rmtoll LIFCR CTCIF1 LL_DMA_ClearFlag_TC1 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TC1(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF1); |
| } |
| |
| /** |
| * @brief Clear Stream 2 transfer complete flag. |
| * @rmtoll LIFCR CTCIF2 LL_DMA_ClearFlag_TC2 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TC2(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF2); |
| } |
| |
| /** |
| * @brief Clear Stream 3 transfer complete flag. |
| * @rmtoll LIFCR CTCIF3 LL_DMA_ClearFlag_TC3 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TC3(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTCIF3); |
| } |
| |
| /** |
| * @brief Clear Stream 4 transfer complete flag. |
| * @rmtoll HIFCR CTCIF4 LL_DMA_ClearFlag_TC4 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TC4(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF4); |
| } |
| |
| /** |
| * @brief Clear Stream 5 transfer complete flag. |
| * @rmtoll HIFCR CTCIF5 LL_DMA_ClearFlag_TC5 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TC5(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF5); |
| } |
| |
| /** |
| * @brief Clear Stream 6 transfer complete flag. |
| * @rmtoll HIFCR CTCIF6 LL_DMA_ClearFlag_TC6 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TC6(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF6); |
| } |
| |
| /** |
| * @brief Clear Stream 7 transfer complete flag. |
| * @rmtoll HIFCR CTCIF7 LL_DMA_ClearFlag_TC7 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TC7(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTCIF7); |
| } |
| |
| /** |
| * @brief Clear Stream 0 transfer error flag. |
| * @rmtoll LIFCR CTEIF0 LL_DMA_ClearFlag_TE0 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TE0(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF0); |
| } |
| |
| /** |
| * @brief Clear Stream 1 transfer error flag. |
| * @rmtoll LIFCR CTEIF1 LL_DMA_ClearFlag_TE1 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TE1(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF1); |
| } |
| |
| /** |
| * @brief Clear Stream 2 transfer error flag. |
| * @rmtoll LIFCR CTEIF2 LL_DMA_ClearFlag_TE2 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TE2(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF2); |
| } |
| |
| /** |
| * @brief Clear Stream 3 transfer error flag. |
| * @rmtoll LIFCR CTEIF3 LL_DMA_ClearFlag_TE3 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TE3(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CTEIF3); |
| } |
| |
| /** |
| * @brief Clear Stream 4 transfer error flag. |
| * @rmtoll HIFCR CTEIF4 LL_DMA_ClearFlag_TE4 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TE4(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF4); |
| } |
| |
| /** |
| * @brief Clear Stream 5 transfer error flag. |
| * @rmtoll HIFCR CTEIF5 LL_DMA_ClearFlag_TE5 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TE5(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF5); |
| } |
| |
| /** |
| * @brief Clear Stream 6 transfer error flag. |
| * @rmtoll HIFCR CTEIF6 LL_DMA_ClearFlag_TE6 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TE6(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF6); |
| } |
| |
| /** |
| * @brief Clear Stream 7 transfer error flag. |
| * @rmtoll HIFCR CTEIF7 LL_DMA_ClearFlag_TE7 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_TE7(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CTEIF7); |
| } |
| |
| /** |
| * @brief Clear Stream 0 direct mode error flag. |
| * @rmtoll LIFCR CDMEIF0 LL_DMA_ClearFlag_DME0 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_DME0(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF0); |
| } |
| |
| /** |
| * @brief Clear Stream 1 direct mode error flag. |
| * @rmtoll LIFCR CDMEIF1 LL_DMA_ClearFlag_DME1 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_DME1(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF1); |
| } |
| |
| /** |
| * @brief Clear Stream 2 direct mode error flag. |
| * @rmtoll LIFCR CDMEIF2 LL_DMA_ClearFlag_DME2 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_DME2(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF2); |
| } |
| |
| /** |
| * @brief Clear Stream 3 direct mode error flag. |
| * @rmtoll LIFCR CDMEIF3 LL_DMA_ClearFlag_DME3 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_DME3(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CDMEIF3); |
| } |
| |
| /** |
| * @brief Clear Stream 4 direct mode error flag. |
| * @rmtoll HIFCR CDMEIF4 LL_DMA_ClearFlag_DME4 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_DME4(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF4); |
| } |
| |
| /** |
| * @brief Clear Stream 5 direct mode error flag. |
| * @rmtoll HIFCR CDMEIF5 LL_DMA_ClearFlag_DME5 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_DME5(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF5); |
| } |
| |
| /** |
| * @brief Clear Stream 6 direct mode error flag. |
| * @rmtoll HIFCR CDMEIF6 LL_DMA_ClearFlag_DME6 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_DME6(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF6); |
| } |
| |
| /** |
| * @brief Clear Stream 7 direct mode error flag. |
| * @rmtoll HIFCR CDMEIF7 LL_DMA_ClearFlag_DME7 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_DME7(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CDMEIF7); |
| } |
| |
| /** |
| * @brief Clear Stream 0 FIFO error flag. |
| * @rmtoll LIFCR CFEIF0 LL_DMA_ClearFlag_FE0 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_FE0(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF0); |
| } |
| |
| /** |
| * @brief Clear Stream 1 FIFO error flag. |
| * @rmtoll LIFCR CFEIF1 LL_DMA_ClearFlag_FE1 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_FE1(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF1); |
| } |
| |
| /** |
| * @brief Clear Stream 2 FIFO error flag. |
| * @rmtoll LIFCR CFEIF2 LL_DMA_ClearFlag_FE2 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_FE2(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF2); |
| } |
| |
| /** |
| * @brief Clear Stream 3 FIFO error flag. |
| * @rmtoll LIFCR CFEIF3 LL_DMA_ClearFlag_FE3 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_FE3(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->LIFCR , DMA_LIFCR_CFEIF3); |
| } |
| |
| /** |
| * @brief Clear Stream 4 FIFO error flag. |
| * @rmtoll HIFCR CFEIF4 LL_DMA_ClearFlag_FE4 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_FE4(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF4); |
| } |
| |
| /** |
| * @brief Clear Stream 5 FIFO error flag. |
| * @rmtoll HIFCR CFEIF5 LL_DMA_ClearFlag_FE5 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_FE5(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF5); |
| } |
| |
| /** |
| * @brief Clear Stream 6 FIFO error flag. |
| * @rmtoll HIFCR CFEIF6 LL_DMA_ClearFlag_FE6 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_FE6(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF6); |
| } |
| |
| /** |
| * @brief Clear Stream 7 FIFO error flag. |
| * @rmtoll HIFCR CFEIF7 LL_DMA_ClearFlag_FE7 |
| * @param DMAx DMAx Instance |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_ClearFlag_FE7(DMA_TypeDef *DMAx) |
| { |
| WRITE_REG(DMAx->HIFCR , DMA_HIFCR_CFEIF7); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| /** @defgroup DMA_LL_EF_IT_Management IT_Management |
| * @{ |
| */ |
| |
| /** |
| * @brief Enable Half transfer interrupt. |
| * @rmtoll CR HTIE LL_DMA_EnableIT_HT |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_EnableIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_HTIE); |
| } |
| |
| /** |
| * @brief Enable Transfer error interrupt. |
| * @rmtoll CR TEIE LL_DMA_EnableIT_TE |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_EnableIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TEIE); |
| } |
| |
| /** |
| * @brief Enable Transfer complete interrupt. |
| * @rmtoll CR TCIE LL_DMA_EnableIT_TC |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_EnableIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TCIE); |
| } |
| |
| /** |
| * @brief Enable Direct mode error interrupt. |
| * @rmtoll CR DMEIE LL_DMA_EnableIT_DME |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_EnableIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DMEIE); |
| } |
| |
| /** |
| * @brief Enable FIFO error interrupt. |
| * @rmtoll FCR FEIE LL_DMA_EnableIT_FE |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_EnableIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| SET_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FEIE); |
| } |
| |
| /** |
| * @brief Disable Half transfer interrupt. |
| * @rmtoll CR HTIE LL_DMA_DisableIT_HT |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_DisableIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_HTIE); |
| } |
| |
| /** |
| * @brief Disable Transfer error interrupt. |
| * @rmtoll CR TEIE LL_DMA_DisableIT_TE |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_DisableIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TEIE); |
| } |
| |
| /** |
| * @brief Disable Transfer complete interrupt. |
| * @rmtoll CR TCIE LL_DMA_DisableIT_TC |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_DisableIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TCIE); |
| } |
| |
| /** |
| * @brief Disable Direct mode error interrupt. |
| * @rmtoll CR DMEIE LL_DMA_DisableIT_DME |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_DisableIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DMEIE); |
| } |
| |
| /** |
| * @brief Disable FIFO error interrupt. |
| * @rmtoll FCR FEIE LL_DMA_DisableIT_FE |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval None |
| */ |
| __STATIC_INLINE void LL_DMA_DisableIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| CLEAR_BIT(((DMA_Stream_TypeDef *)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FEIE); |
| } |
| |
| /** |
| * @brief Check if Half transfer interrup is enabled. |
| * @rmtoll CR HTIE LL_DMA_IsEnabledIT_HT |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_HT(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_HTIE) == DMA_SxCR_HTIE); |
| } |
| |
| /** |
| * @brief Check if Transfer error nterrup is enabled. |
| * @rmtoll CR TEIE LL_DMA_IsEnabledIT_TE |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TE(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TEIE) == DMA_SxCR_TEIE); |
| } |
| |
| /** |
| * @brief Check if Transfer complete interrup is enabled. |
| * @rmtoll CR TCIE LL_DMA_IsEnabledIT_TC |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_TC(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_TCIE) == DMA_SxCR_TCIE); |
| } |
| |
| /** |
| * @brief Check if Direct mode error interrupt is enabled. |
| * @rmtoll CR DMEIE LL_DMA_IsEnabledIT_DME |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_DME(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->CR, DMA_SxCR_DMEIE) == DMA_SxCR_DMEIE); |
| } |
| |
| /** |
| * @brief Check if FIFO error interrup is enabled. |
| * @rmtoll FCR FEIE LL_DMA_IsEnabledIT_FE |
| * @param DMAx DMAx Instance |
| * @param Stream This parameter can be one of the following values: |
| * @arg @ref LL_DMA_STREAM_0 |
| * @arg @ref LL_DMA_STREAM_1 |
| * @arg @ref LL_DMA_STREAM_2 |
| * @arg @ref LL_DMA_STREAM_3 |
| * @arg @ref LL_DMA_STREAM_4 |
| * @arg @ref LL_DMA_STREAM_5 |
| * @arg @ref LL_DMA_STREAM_6 |
| * @arg @ref LL_DMA_STREAM_7 |
| * @retval State of bit (1 or 0). |
| */ |
| __STATIC_INLINE uint32_t LL_DMA_IsEnabledIT_FE(DMA_TypeDef *DMAx, uint32_t Stream) |
| { |
| return (READ_BIT(((DMA_Stream_TypeDef*)((uint32_t)((uint32_t)DMAx + STREAM_OFFSET_TAB[Stream])))->FCR, DMA_SxFCR_FEIE) == DMA_SxFCR_FEIE); |
| } |
| |
| /** |
| * @} |
| */ |
| |
| #if defined(USE_FULL_LL_DRIVER) |
| /** @defgroup DMA_LL_EF_Init Initialization and de-initialization functions |
| * @{ |
| */ |
| |
| uint32_t LL_DMA_Init(DMA_TypeDef *DMAx, uint32_t Stream, LL_DMA_InitTypeDef *DMA_InitStruct); |
| uint32_t LL_DMA_DeInit(DMA_TypeDef *DMAx, uint32_t Stream); |
| void LL_DMA_StructInit(LL_DMA_InitTypeDef *DMA_InitStruct); |
| |
| /** |
| * @} |
| */ |
| #endif /* USE_FULL_LL_DRIVER */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #endif /* DMA1 || DMA2 */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* __STM32F7xx_LL_DMA_H */ |
| |