[LL][RTC] Correct misleading note about shadow registers
diff --git a/Inc/stm32f7xx_ll_rtc.h b/Inc/stm32f7xx_ll_rtc.h
index 64dfa8c..d84c466 100644
--- a/Inc/stm32f7xx_ll_rtc.h
+++ b/Inc/stm32f7xx_ll_rtc.h
@@ -1041,7 +1041,7 @@
/**
* @brief Get time format (AM or PM notation)
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
* shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1075,7 +1075,7 @@
/**
* @brief Get Hours in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
* shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1110,7 +1110,7 @@
/**
* @brief Get Minutes in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
* shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1145,7 +1145,7 @@
/**
* @brief Get Seconds in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
* shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1195,7 +1195,7 @@
/**
* @brief Get time (hour, minute and second) in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note Read either RTC_SSR or RTC_TR locks the values in the higher-order calendar
* shadow registers until RTC_DR is read (LL_RTC_ReadReg(RTC, DR)).
@@ -1337,7 +1337,7 @@
/**
* @brief Get Year in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Year from BCD to Binary format
* @rmtoll DR YT LL_RTC_DATE_GetYear\n
@@ -1371,7 +1371,7 @@
/**
* @brief Get Week day
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @rmtoll DR WDU LL_RTC_DATE_GetWeekDay
* @param RTCx RTC Instance
@@ -1418,7 +1418,7 @@
/**
* @brief Get Month in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Month from BCD to Binary format
* @rmtoll DR MT LL_RTC_DATE_GetMonth\n
@@ -1460,7 +1460,7 @@
/**
* @brief Get Day in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note helper macro __LL_RTC_CONVERT_BCD2BIN is available to convert Day from BCD to Binary format
* @rmtoll DR DT LL_RTC_DATE_GetDay\n
@@ -1522,7 +1522,7 @@
/**
* @brief Get date (WeekDay, Day, Month and Year) in BCD format
- * @note if shadow mode is disabled (BYPSHAD=0), need to check if RSF flag is set
+ * @note if RTC shadow registers are not bypassed (BYPSHAD=0), need to check if RSF flag is set
* before reading this bit
* @note helper macros __LL_RTC_GET_WEEKDAY, __LL_RTC_GET_YEAR, __LL_RTC_GET_MONTH,
* and __LL_RTC_GET_DAY are available to get independently each parameter.