[HAL][QSPI] Update HAL_QSPI_Abort() and  HAL_QSPI_Abort_IT() APIs to check on QSPI BUSY flag status before executing the abort procedure

Src/stm32f7xx_hal_qspi.c

diff --git a/Src/stm32f7xx_hal_qspi.c b/Src/stm32f7xx_hal_qspi.c
index fa9a55a..a28b4f2 100644
--- a/Src/stm32f7xx_hal_qspi.c
+++ b/Src/stm32f7xx_hal_qspi.c
@@ -2291,25 +2291,33 @@
       }
     }
 
-    /* Configure QSPI: CR register with Abort request */
-    SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT);
-
-    /* Wait until TC flag is set to go back in idle state */
-    status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, tickstart, hqspi->Timeout);
-
-    if (status == HAL_OK)
+    if (__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_BUSY) != RESET)
     {
-      __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+      /* Configure QSPI: CR register with Abort request */
+      SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT);
+      
+      /* Wait until TC flag is set to go back in idle state */
+      status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, tickstart, hqspi->Timeout);
+      
+      if (status == HAL_OK)
+      {
+        __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+        
+        /* Wait until BUSY flag is reset */
+        status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, hqspi->Timeout);
+      }
 
-      /* Wait until BUSY flag is reset */
-      status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, tickstart, hqspi->Timeout);
+      if (status == HAL_OK)
+      {
+        /* Reset functional mode configuration to indirect write mode by default */
+        CLEAR_BIT(hqspi->Instance->CCR, QUADSPI_CCR_FMODE);
+        
+        /* Update state */
+        hqspi->State = HAL_QSPI_STATE_READY;
+      }
     }
-
-    if (status == HAL_OK)
+    else
     {
-      /* Reset functional mode configuration to indirect write mode by default */
-      CLEAR_BIT(hqspi->Instance->CCR, QUADSPI_CCR_FMODE);
-
       /* Update state */
       hqspi->State = HAL_QSPI_STATE_READY;
     }
@@ -2361,14 +2369,22 @@
     }
     else
     {
-      /* Clear interrupt */
-      __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
-
-      /* Enable the QSPI Transfer Complete Interrupt */
-      __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TC);
-
-      /* Configure QSPI: CR register with Abort request */
-      SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT);
+      if (__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_BUSY) != RESET)
+      {
+        /* Clear interrupt */
+        __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
+        
+        /* Enable the QSPI Transfer Complete Interrupt */
+        __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TC);
+        
+        /* Configure QSPI: CR register with Abort request */
+        SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT);
+      }    
+      else
+      {
+        /* Change state of QSPI */
+        hqspi->State = HAL_QSPI_STATE_READY;
+      }
     }
   }
   return status;