[HAL][LL][ADC] Rename TRx registers AWDxTR to be compliant with the reference manual NOTE: This fix shall be used in conjunction with the below mentioned dependency. - https://github.com/STMicroelectronics/cmsis_device_g0/tree/1fad10e09202e14997912bafa2f0c20f772b8a4e
diff --git a/Inc/stm32g0xx_ll_adc.h b/Inc/stm32g0xx_ll_adc.h index c443dfd..9aa7536 100644 --- a/Inc/stm32g0xx_ll_adc.h +++ b/Inc/stm32g0xx_ll_adc.h
@@ -786,9 +786,9 @@ /** @defgroup ADC_LL_EC_AWD_THRESHOLDS Analog watchdog - Thresholds * @{ */ -#define LL_ADC_AWD_THRESHOLD_HIGH (ADC_TR1_HT1 ) /*!< ADC analog watchdog threshold high */ -#define LL_ADC_AWD_THRESHOLD_LOW ( ADC_TR1_LT1) /*!< ADC analog watchdog threshold low */ -#define LL_ADC_AWD_THRESHOLDS_HIGH_LOW (ADC_TR1_HT1 | ADC_TR1_LT1) /*!< ADC analog watchdog both thresholds high and low concatenated into the same data */ +#define LL_ADC_AWD_THRESHOLD_HIGH (ADC_AWD1TR_HT1 ) /*!< ADC analog watchdog threshold high */ +#define LL_ADC_AWD_THRESHOLD_LOW ( ADC_AWD1TR_LT1) /*!< ADC analog watchdog threshold low */ +#define LL_ADC_AWD_THRESHOLDS_HIGH_LOW (ADC_AWD1TR_HT1 | ADC_AWD1TR_LT1) /*!< ADC analog watchdog both thresholds high and low concatenated into the same data */ /** * @} */ @@ -3866,12 +3866,12 @@ * ADC state: * ADC must be disabled or enabled without conversion on going * on group regular. - * @rmtoll TR1 HT1 LL_ADC_ConfigAnalogWDThresholds\n - * TR2 HT2 LL_ADC_ConfigAnalogWDThresholds\n - * TR3 HT3 LL_ADC_ConfigAnalogWDThresholds\n - * TR1 LT1 LL_ADC_ConfigAnalogWDThresholds\n - * TR2 LT2 LL_ADC_ConfigAnalogWDThresholds\n - * TR3 LT3 LL_ADC_ConfigAnalogWDThresholds + * @rmtoll AWD1TR HT1 LL_ADC_ConfigAnalogWDThresholds\n + * AWD2TR HT2 LL_ADC_ConfigAnalogWDThresholds\n + * AWD3TR HT3 LL_ADC_ConfigAnalogWDThresholds\n + * AWD1TR LT1 LL_ADC_ConfigAnalogWDThresholds\n + * AWD2TR LT2 LL_ADC_ConfigAnalogWDThresholds\n + * AWD3TR LT3 LL_ADC_ConfigAnalogWDThresholds * @param ADCx ADC instance * @param AWDy This parameter can be one of the following values: * @arg @ref LL_ADC_AWD1 @@ -3889,10 +3889,10 @@ /* "AWDy". */ /* Parameters "AWDy" and "AWDThresholdxxxValue" are used with masks because */ /* containing other bits reserved for other purpose. */ - __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, (((AWDy & ADC_AWD_TRX_REGOFFSET_MASK)) >> (ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS)) + ((ADC_AWD_CR3_REGOFFSET & AWDy) >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL))); + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->AWD1TR, (((AWDy & ADC_AWD_TRX_REGOFFSET_MASK)) >> (ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS)) + ((ADC_AWD_CR3_REGOFFSET & AWDy) >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL))); MODIFY_REG(*preg, - ADC_TR1_HT1 | ADC_TR1_LT1, + ADC_AWD1TR_HT1 | ADC_AWD1TR_LT1, (AWDThresholdHighValue << ADC_TR1_HT1_BITOFFSET_POS) | AWDThresholdLowValue); } @@ -3942,12 +3942,12 @@ * ADC state: * ADC can be disabled, enabled with or without conversion on going * on ADC group regular. - * @rmtoll TR1 HT1 LL_ADC_SetAnalogWDThresholds\n - * TR2 HT2 LL_ADC_SetAnalogWDThresholds\n - * TR3 HT3 LL_ADC_SetAnalogWDThresholds\n - * TR1 LT1 LL_ADC_SetAnalogWDThresholds\n - * TR2 LT2 LL_ADC_SetAnalogWDThresholds\n - * TR3 LT3 LL_ADC_SetAnalogWDThresholds + * @rmtoll AWD1TR HT1 LL_ADC_SetAnalogWDThresholds\n + * AWD2TR HT2 LL_ADC_SetAnalogWDThresholds\n + * AWD3TR HT3 LL_ADC_SetAnalogWDThresholds\n + * AWD1TR LT1 LL_ADC_SetAnalogWDThresholds\n + * AWD2TR LT2 LL_ADC_SetAnalogWDThresholds\n + * AWD3TR LT3 LL_ADC_SetAnalogWDThresholds * @param ADCx ADC instance * @param AWDy This parameter can be one of the following values: * @arg @ref LL_ADC_AWD1 @@ -3967,7 +3967,7 @@ /* "AWDThresholdsHighLow" and "AWDy". */ /* Parameters "AWDy" and "AWDThresholdValue" are used with masks because */ /* containing other bits reserved for other purpose. */ - __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, + __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->AWD1TR, (((AWDy & ADC_AWD_TRX_REGOFFSET_MASK)) >> (ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS)) + ((ADC_AWD_CR3_REGOFFSET & AWDy) >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL))); @@ -3987,12 +3987,12 @@ * @note In case of ADC resolution different of 12 bits, * analog watchdog thresholds data require a specific shift. * Use helper macro @ref __LL_ADC_ANALOGWD_GET_THRESHOLD_RESOLUTION(). - * @rmtoll TR1 HT1 LL_ADC_GetAnalogWDThresholds\n - * TR2 HT2 LL_ADC_GetAnalogWDThresholds\n - * TR3 HT3 LL_ADC_GetAnalogWDThresholds\n - * TR1 LT1 LL_ADC_GetAnalogWDThresholds\n - * TR2 LT2 LL_ADC_GetAnalogWDThresholds\n - * TR3 LT3 LL_ADC_GetAnalogWDThresholds + * @rmtoll AWD1TR HT1 LL_ADC_GetAnalogWDThresholds\n + * AWD2TR HT2 LL_ADC_GetAnalogWDThresholds\n + * AWD3TR HT3 LL_ADC_GetAnalogWDThresholds\n + * AWD1TR LT1 LL_ADC_GetAnalogWDThresholds\n + * AWD2TR LT2 LL_ADC_GetAnalogWDThresholds\n + * AWD3TR LT3 LL_ADC_GetAnalogWDThresholds * @param ADCx ADC instance * @param AWDy This parameter can be one of the following values: * @arg @ref LL_ADC_AWD1 @@ -4011,14 +4011,14 @@ /* "AWDThresholdsHighLow" and "AWDy". */ /* Parameters "AWDy" and "AWDThresholdValue" are used with masks because */ /* containing other bits reserved for other purpose. */ - const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->TR1, + const __IO uint32_t *preg = __ADC_PTR_REG_OFFSET(ADCx->AWD1TR, (((AWDy & ADC_AWD_TRX_REGOFFSET_MASK)) >> (ADC_AWD_TRX_REGOFFSET_BITOFFSET_POS)) + ((ADC_AWD_CR3_REGOFFSET & AWDy) >> (ADC_AWD_CRX_REGOFFSET_BITOFFSET_POS + 1UL))); return (uint32_t)(READ_BIT(*preg, - (AWDThresholdsHighLow | ADC_TR1_LT1)) + (AWDThresholdsHighLow | ADC_AWD1TR_LT1)) >> (((AWDThresholdsHighLow & ADC_AWD_TRX_BIT_HIGH_MASK) >> ADC_AWD_TRX_BIT_HIGH_SHIFT4) - & ~(AWDThresholdsHighLow & ADC_TR1_LT1))); + & ~(AWDThresholdsHighLow & ADC_AWD1TR_LT1))); } /**
diff --git a/Src/stm32g0xx_hal_adc.c b/Src/stm32g0xx_hal_adc.c index 180b5da..11d89c5 100644 --- a/Src/stm32g0xx_hal_adc.c +++ b/Src/stm32g0xx_hal_adc.c
@@ -845,8 +845,10 @@ /* Reset register SMPR */ hadc->Instance->SMPR &= ~ADC_SMPR_SMP1; - /* Reset register TR1 */ - hadc->Instance->TR1 &= ~(ADC_TR1_HT1 | ADC_TR1_LT1); + /* Reset registers AWDxTR */ + hadc->Instance->AWD1TR &= ~(ADC_AWD1TR_HT1 | ADC_AWD1TR_LT1); + hadc->Instance->AWD2TR &= ~(ADC_AWD2TR_HT2 | ADC_AWD2TR_LT2); + hadc->Instance->AWD3TR &= ~(ADC_AWD3TR_HT3 | ADC_AWD3TR_LT3); /* Reset register CHSELR */ hadc->Instance->CHSELR &= ~(ADC_CHSELR_SQ_ALL);
diff --git a/Src/stm32g0xx_ll_adc.c b/Src/stm32g0xx_ll_adc.c index 4d7801a..7a4b1ac 100644 --- a/Src/stm32g0xx_ll_adc.c +++ b/Src/stm32g0xx_ll_adc.c
@@ -446,14 +446,14 @@ /* Reset register SMPR */ CLEAR_BIT(ADCx->SMPR, ADC_SMPR_SMP1 | ADC_SMPR_SMP2 | ADC_SMPR_SMPSEL); - /* Reset register TR1 */ - MODIFY_REG(ADCx->TR1, ADC_TR1_HT1 | ADC_TR1_LT1, ADC_TR1_HT1); + /* Reset register AWD1TR */ + MODIFY_REG(ADCx->AWD1TR, ADC_AWD1TR_HT1 | ADC_AWD1TR_LT1, ADC_AWD1TR_HT1); - /* Reset register TR2 */ - MODIFY_REG(ADCx->TR2, ADC_TR2_HT2 | ADC_TR2_LT2, ADC_TR2_HT2); + /* Reset register AWD2TR */ + MODIFY_REG(ADCx->AWD2TR, ADC_AWD2TR_HT2 | ADC_AWD2TR_LT2, ADC_AWD2TR_HT2); - /* Reset register TR3 */ - MODIFY_REG(ADCx->TR3, ADC_TR3_HT3 | ADC_TR3_LT3, ADC_TR3_HT3); + /* Reset register AWD3TR */ + MODIFY_REG(ADCx->AWD3TR, ADC_AWD3TR_HT3 | ADC_AWD3TR_LT3, ADC_AWD3TR_HT3); /* Reset register CHSELR */ CLEAR_BIT(ADCx->CHSELR,